/*
 *  derived from "twidjoy.c"
 *
 *  Copyright (c) 2008 Martin Kebert
 *  Copyright (c) 2001 Arndt Schoenewald
 *  Copyright (c) 2000-2001 Vojtech Pavlik
 *  Copyright (c) 2000 Mark Fletcher
 *
 */

/*
 * Driver to use 4CH RC transmitter using Zhen Hua 5-byte protocol (Walkera Lama,
 * EasyCopter etc.) as a joystick under Linux.
 *
 * RC transmitters using Zhen Hua 5-byte protocol are cheap four channels
 * transmitters for control a RC planes or RC helicopters with possibility to
 * connect on a serial port.
 * Data coming from transmitter is in this order:
 * 1. byte = synchronisation byte
 * 2. byte = X axis
 * 3. byte = Y axis
 * 4. byte = RZ axis
 * 5. byte = Z axis
 * (and this is repeated)
 *
 * For questions or feedback regarding this driver module please contact:
 * Martin Kebert <gkmarty@gmail.com> - but I am not a C-programmer nor kernel
 * coder :-(
 */

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/bitrev.h>
#include <linux/input.h>
#include <linux/serio.h>

#define DRIVER_DESC     "RC transmitter with 5-byte Zhen Hua protocol joystick driver"

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

/*
 * Constants.
 */

#define ZHENHUA_MAX_LENGTH 5

/*
 * Zhen Hua data.
 */

struct zhenhua {
        struct input_dev *dev;
        int idx;
        unsigned char data[ZHENHUA_MAX_LENGTH];
        char phys[32];
};

/*
 * zhenhua_process_packet() decodes packets the driver receives from the
 * RC transmitter. It updates the data accordingly.
 */

static void zhenhua_process_packet(struct zhenhua *zhenhua)
{
        struct input_dev *dev = zhenhua->dev;
        unsigned char *data = zhenhua->data;

        input_report_abs(dev, ABS_Y, data[1]);
        input_report_abs(dev, ABS_X, data[2]);
        input_report_abs(dev, ABS_RZ, data[3]);
        input_report_abs(dev, ABS_Z, data[4]);

        input_sync(dev);
}

/*
 * zhenhua_interrupt() is called by the low level driver when characters
 * are ready for us. We then buffer them for further processing, or call the
 * packet processing routine.
 */

static irqreturn_t zhenhua_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
{
        struct zhenhua *zhenhua = serio_get_drvdata(serio);

        /* All Zhen Hua packets are 5 bytes. The fact that the first byte
         * is allways 0xf7 and all others are in range 0x32 - 0xc8 (50-200)
         * can be used to check and regain sync. */

        if (data == 0xef)
                zhenhua->idx = 0;       /* this byte starts a new packet */
        else if (zhenhua->idx == 0)
                return IRQ_HANDLED;     /* wrong MSB -- ignore this byte */

        if (zhenhua->idx < ZHENHUA_MAX_LENGTH)
                zhenhua->data[zhenhua->idx++] = bitrev8(data);

        if (zhenhua->idx == ZHENHUA_MAX_LENGTH) {
                zhenhua_process_packet(zhenhua);
                zhenhua->idx = 0;
        }

        return IRQ_HANDLED;
}

/*
 * zhenhua_disconnect() is the opposite of zhenhua_connect()
 */

static void zhenhua_disconnect(struct serio *serio)
{
        struct zhenhua *zhenhua = serio_get_drvdata(serio);

        serio_close(serio);
        serio_set_drvdata(serio, NULL);
        input_unregister_device(zhenhua->dev);
        kfree(zhenhua);
}

/*
 * zhenhua_connect() is the routine that is called when someone adds a
 * new serio device. It looks for the Twiddler, and if found, registers
 * it as an input device.
 */

static int zhenhua_connect(struct serio *serio, struct serio_driver *drv)
{
        struct zhenhua *zhenhua;
        struct input_dev *input_dev;
        int err = -ENOMEM;

        zhenhua = kzalloc(sizeof(struct zhenhua), GFP_KERNEL);
        input_dev = input_allocate_device();
        if (!zhenhua || !input_dev)
                goto fail1;

        zhenhua->dev = input_dev;
        snprintf(zhenhua->phys, sizeof(zhenhua->phys), "%s/input0", serio->phys);

        input_dev->name = "Zhen Hua 5-byte device";
        input_dev->phys = zhenhua->phys;
        input_dev->id.bustype = BUS_RS232;
        input_dev->id.vendor = SERIO_ZHENHUA;
        input_dev->id.product = 0x0001;
        input_dev->id.version = 0x0100;
        input_dev->dev.parent = &serio->dev;

        input_dev->evbit[0] = BIT(EV_ABS);
        input_set_abs_params(input_dev, ABS_X, 50, 200, 0, 0);
        input_set_abs_params(input_dev, ABS_Y, 50, 200, 0, 0);
        input_set_abs_params(input_dev, ABS_Z, 50, 200, 0, 0);
        input_set_abs_params(input_dev, ABS_RZ, 50, 200, 0, 0);

        serio_set_drvdata(serio, zhenhua);

        err = serio_open(serio, drv);
        if (err)
                goto fail2;

        err = input_register_device(zhenhua->dev);
        if (err)
                goto fail3;

        return 0;

 fail3: serio_close(serio);
 fail2: serio_set_drvdata(serio, NULL);
 fail1: input_free_device(input_dev);
        kfree(zhenhua);
        return err;
}

/*
 * The serio driver structure.
 */

static struct serio_device_id zhenhua_serio_ids[] = {
        {
                .type   = SERIO_RS232,
                .proto  = SERIO_ZHENHUA,
                .id     = SERIO_ANY,
                .extra  = SERIO_ANY,
        },
        { 0 }
};

MODULE_DEVICE_TABLE(serio, zhenhua_serio_ids);

static struct serio_driver zhenhua_drv = {
        .driver         = {
                .name   = "zhenhua",
        },
        .description    = DRIVER_DESC,
        .id_table       = zhenhua_serio_ids,
        .interrupt      = zhenhua_interrupt,
        .connect        = zhenhua_connect,
        .disconnect     = zhenhua_disconnect,
};

module_serio_driver(zhenhua_drv);