linux/drivers/input/touchscreen/tsc200x-core.h
<<
>>
Prefs
   1#ifndef _TSC200X_CORE_H
   2#define _TSC200X_CORE_H
   3
   4/* control byte 1 */
   5#define TSC200X_CMD                     0x80
   6#define TSC200X_CMD_NORMAL              0x00
   7#define TSC200X_CMD_STOP                0x01
   8#define TSC200X_CMD_12BIT               0x04
   9
  10/* control byte 0 */
  11#define TSC200X_REG_READ                0x01 /* R/W access */
  12#define TSC200X_REG_PND0                0x02 /* Power Not Down Control */
  13#define TSC200X_REG_X                   (0x0 << 3)
  14#define TSC200X_REG_Y                   (0x1 << 3)
  15#define TSC200X_REG_Z1                  (0x2 << 3)
  16#define TSC200X_REG_Z2                  (0x3 << 3)
  17#define TSC200X_REG_AUX                 (0x4 << 3)
  18#define TSC200X_REG_TEMP1               (0x5 << 3)
  19#define TSC200X_REG_TEMP2               (0x6 << 3)
  20#define TSC200X_REG_STATUS              (0x7 << 3)
  21#define TSC200X_REG_AUX_HIGH            (0x8 << 3)
  22#define TSC200X_REG_AUX_LOW             (0x9 << 3)
  23#define TSC200X_REG_TEMP_HIGH           (0xA << 3)
  24#define TSC200X_REG_TEMP_LOW            (0xB << 3)
  25#define TSC200X_REG_CFR0                (0xC << 3)
  26#define TSC200X_REG_CFR1                (0xD << 3)
  27#define TSC200X_REG_CFR2                (0xE << 3)
  28#define TSC200X_REG_CONV_FUNC           (0xF << 3)
  29
  30/* configuration register 0 */
  31#define TSC200X_CFR0_PRECHARGE_276US    0x0040
  32#define TSC200X_CFR0_STABTIME_1MS       0x0300
  33#define TSC200X_CFR0_CLOCK_1MHZ         0x1000
  34#define TSC200X_CFR0_RESOLUTION12       0x2000
  35#define TSC200X_CFR0_PENMODE            0x8000
  36#define TSC200X_CFR0_INITVALUE          (TSC200X_CFR0_STABTIME_1MS    | \
  37                                         TSC200X_CFR0_CLOCK_1MHZ      | \
  38                                         TSC200X_CFR0_RESOLUTION12    | \
  39                                         TSC200X_CFR0_PRECHARGE_276US | \
  40                                         TSC200X_CFR0_PENMODE)
  41
  42/* bits common to both read and write of configuration register 0 */
  43#define TSC200X_CFR0_RW_MASK            0x3fff
  44
  45/* configuration register 1 */
  46#define TSC200X_CFR1_BATCHDELAY_4MS     0x0003
  47#define TSC200X_CFR1_INITVALUE          TSC200X_CFR1_BATCHDELAY_4MS
  48
  49/* configuration register 2 */
  50#define TSC200X_CFR2_MAVE_Z             0x0004
  51#define TSC200X_CFR2_MAVE_Y             0x0008
  52#define TSC200X_CFR2_MAVE_X             0x0010
  53#define TSC200X_CFR2_AVG_7              0x0800
  54#define TSC200X_CFR2_MEDIUM_15          0x3000
  55#define TSC200X_CFR2_INITVALUE          (TSC200X_CFR2_MAVE_X    | \
  56                                         TSC200X_CFR2_MAVE_Y    | \
  57                                         TSC200X_CFR2_MAVE_Z    | \
  58                                         TSC200X_CFR2_MEDIUM_15 | \
  59                                         TSC200X_CFR2_AVG_7)
  60
  61#define MAX_12BIT                       0xfff
  62#define TSC200X_DEF_X_FUZZ              4
  63#define TSC200X_DEF_Y_FUZZ              8
  64#define TSC200X_DEF_P_FUZZ              2
  65#define TSC200X_DEF_RESISTOR            280
  66
  67#define TSC2005_SPI_MAX_SPEED_HZ        10000000
  68#define TSC200X_PENUP_TIME_MS           40
  69
  70extern const struct regmap_config tsc200x_regmap_config;
  71extern const struct dev_pm_ops tsc200x_pm_ops;
  72
  73int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
  74                  struct regmap *regmap,
  75                  int (*tsc200x_cmd)(struct device *dev, u8 cmd));
  76int tsc200x_remove(struct device *dev);
  77
  78#endif
  79