/*
 * Analog Devices ADV7511 HDMI Transmitter Device Driver
 *
 * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
 *
 * This program is free software; you may redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */


#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <linux/gpio.h>
#include <linux/workqueue.h>
#include <linux/hdmi.h>
#include <linux/v4l2-dv-timings.h>
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-dv-timings.h>
#include <media/i2c/adv7511.h>
#include <media/cec.h>

static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "debug level (0-2)");

MODULE_DESCRIPTION("Analog Devices ADV7511 HDMI Transmitter Device Driver");
MODULE_AUTHOR("Hans Verkuil");
MODULE_LICENSE("GPL v2");

#define MASK_ADV7511_EDID_RDY_INT   0x04
#define MASK_ADV7511_MSEN_INT       0x40
#define MASK_ADV7511_HPD_INT        0x80

#define MASK_ADV7511_HPD_DETECT     0x40
#define MASK_ADV7511_MSEN_DETECT    0x20
#define MASK_ADV7511_EDID_RDY       0x10

#define EDID_MAX_RETRIES (8)
#define EDID_DELAY 250
#define EDID_MAX_SEGM 8

#define ADV7511_MAX_WIDTH 1920
#define ADV7511_MAX_HEIGHT 1200
#define ADV7511_MIN_PIXELCLOCK 20000000
#define ADV7511_MAX_PIXELCLOCK 225000000

#define ADV7511_MAX_ADDRS (3)

/*
**********************************************************************
*
*  Arrays with configuration parameters for the ADV7511
*
**********************************************************************
*/

struct i2c_reg_value {
        unsigned char reg;
        unsigned char value;
};

struct adv7511_state_edid {
        /* total number of blocks */
        u32 blocks;
        /* Number of segments read */
        u32 segments;
        u8 data[EDID_MAX_SEGM * 256];
        /* Number of EDID read retries left */
        unsigned read_retries;
        bool complete;
};

struct adv7511_state {
        struct adv7511_platform_data pdata;
        struct v4l2_subdev sd;
        struct media_pad pad;
        struct v4l2_ctrl_handler hdl;
        int chip_revision;
        u8 i2c_edid_addr;
        u8 i2c_pktmem_addr;
        u8 i2c_cec_addr;

        struct i2c_client *i2c_cec;
        struct cec_adapter *cec_adap;
        u8   cec_addr[ADV7511_MAX_ADDRS];
        u8   cec_valid_addrs;
        bool cec_enabled_adap;

        /* Is the adv7511 powered on? */
        bool power_on;
        /* Did we receive hotplug and rx-sense signals? */
        bool have_monitor;
        bool enabled_irq;
        /* timings from s_dv_timings */
        struct v4l2_dv_timings dv_timings;
        u32 fmt_code;
        u32 colorspace;
        u32 ycbcr_enc;
        u32 quantization;
        u32 xfer_func;
        u32 content_type;
        /* controls */
        struct v4l2_ctrl *hdmi_mode_ctrl;
        struct v4l2_ctrl *hotplug_ctrl;
        struct v4l2_ctrl *rx_sense_ctrl;
        struct v4l2_ctrl *have_edid0_ctrl;
        struct v4l2_ctrl *rgb_quantization_range_ctrl;
        struct v4l2_ctrl *content_type_ctrl;
        struct i2c_client *i2c_edid;
        struct i2c_client *i2c_pktmem;
        struct adv7511_state_edid edid;
        /* Running counter of the number of detected EDIDs (for debugging) */
        unsigned edid_detect_counter;
        struct workqueue_struct *work_queue;
        struct delayed_work edid_handler; /* work entry */
};

static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd);
static bool adv7511_check_edid_status(struct v4l2_subdev *sd);
static void adv7511_setup(struct v4l2_subdev *sd);
static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq);
static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq);


static const struct v4l2_dv_timings_cap adv7511_timings_cap = {
        .type = V4L2_DV_BT_656_1120,
        /* keep this initialization for compatibility with GCC < 4.4.6 */
        .reserved = { 0 },
        V4L2_INIT_BT_TIMINGS(0, ADV7511_MAX_WIDTH, 0, ADV7511_MAX_HEIGHT,
                ADV7511_MIN_PIXELCLOCK, ADV7511_MAX_PIXELCLOCK,
                V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
                        V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
                V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
                        V4L2_DV_BT_CAP_CUSTOM)
};

static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd)
{
        return container_of(sd, struct adv7511_state, sd);
}

static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
{
        return &container_of(ctrl->handler, struct adv7511_state, hdl)->sd;
}

/* ------------------------ I2C ----------------------------------------------- */

static s32 adv_smbus_read_byte_data_check(struct i2c_client *client,
                                          u8 command, bool check)
{
        union i2c_smbus_data data;

        if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags,
                            I2C_SMBUS_READ, command,
                            I2C_SMBUS_BYTE_DATA, &data))
                return data.byte;
        if (check)
                v4l_err(client, "error reading %02x, %02x\n",
                        client->addr, command);
        return -1;
}

static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command)
{
        int i;
        for (i = 0; i < 3; i++) {
                int ret = adv_smbus_read_byte_data_check(client, command, true);
                if (ret >= 0) {
                        if (i)
                                v4l_err(client, "read ok after %d retries\n", i);
                        return ret;
                }
        }
        v4l_err(client, "read failed\n");
        return -1;
}

static int adv7511_rd(struct v4l2_subdev *sd, u8 reg)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);

        return adv_smbus_read_byte_data(client, reg);
}

static int adv7511_wr(struct v4l2_subdev *sd, u8 reg, u8 val)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        int ret;
        int i;

        for (i = 0; i < 3; i++) {
                ret = i2c_smbus_write_byte_data(client, reg, val);
                if (ret == 0)
                        return 0;
        }
        v4l2_err(sd, "%s: i2c write error\n", __func__);
        return ret;
}

/* To set specific bits in the register, a clear-mask is given (to be AND-ed),
   and then the value-mask (to be OR-ed). */
static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, u8 clr_mask, u8 val_mask)
{
        adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask);
}

static int adv_smbus_read_i2c_block_data(struct i2c_client *client,
                                         u8 command, unsigned length, u8 *values)
{
        union i2c_smbus_data data;
        int ret;

        if (length > I2C_SMBUS_BLOCK_MAX)
                length = I2C_SMBUS_BLOCK_MAX;
        data.block[0] = length;

        ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
                             I2C_SMBUS_READ, command,
                             I2C_SMBUS_I2C_BLOCK_DATA, &data);
        memcpy(values, data.block + 1, length);
        return ret;
}

static void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        int i;
        int err = 0;

        v4l2_dbg(1, debug, sd, "%s:\n", __func__);

        for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX)
                err = adv_smbus_read_i2c_block_data(state->i2c_edid, i,
                                                    I2C_SMBUS_BLOCK_MAX, buf + i);
        if (err)
                v4l2_err(sd, "%s: i2c read error\n", __func__);
}

static inline int adv7511_cec_read(struct v4l2_subdev *sd, u8 reg)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        return i2c_smbus_read_byte_data(state->i2c_cec, reg);
}

static int adv7511_cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        int ret;
        int i;

        for (i = 0; i < 3; i++) {
                ret = i2c_smbus_write_byte_data(state->i2c_cec, reg, val);
                if (ret == 0)
                        return 0;
        }
        v4l2_err(sd, "%s: I2C Write Problem\n", __func__);
        return ret;
}

static inline int adv7511_cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask,
                                   u8 val)
{
        return adv7511_cec_write(sd, reg, (adv7511_cec_read(sd, reg) & mask) | val);
}

static int adv7511_pktmem_rd(struct v4l2_subdev *sd, u8 reg)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        return adv_smbus_read_byte_data(state->i2c_pktmem, reg);
}

static int adv7511_pktmem_wr(struct v4l2_subdev *sd, u8 reg, u8 val)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        int ret;
        int i;

        for (i = 0; i < 3; i++) {
                ret = i2c_smbus_write_byte_data(state->i2c_pktmem, reg, val);
                if (ret == 0)
                        return 0;
        }
        v4l2_err(sd, "%s: i2c write error\n", __func__);
        return ret;
}

/* To set specific bits in the register, a clear-mask is given (to be AND-ed),
   and then the value-mask (to be OR-ed). */
static inline void adv7511_pktmem_wr_and_or(struct v4l2_subdev *sd, u8 reg, u8 clr_mask, u8 val_mask)
{
        adv7511_pktmem_wr(sd, reg, (adv7511_pktmem_rd(sd, reg) & clr_mask) | val_mask);
}

static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd)
{
        return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT;
}

static inline bool adv7511_have_rx_sense(struct v4l2_subdev *sd)
{
        return adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT;
}

static void adv7511_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode)
{
        adv7511_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5);
}

static void adv7511_csc_coeff(struct v4l2_subdev *sd,
                              u16 A1, u16 A2, u16 A3, u16 A4,
                              u16 B1, u16 B2, u16 B3, u16 B4,
                              u16 C1, u16 C2, u16 C3, u16 C4)
{
        /* A */
        adv7511_wr_and_or(sd, 0x18, 0xe0, A1>>8);
        adv7511_wr(sd, 0x19, A1);
        adv7511_wr_and_or(sd, 0x1A, 0xe0, A2>>8);
        adv7511_wr(sd, 0x1B, A2);
        adv7511_wr_and_or(sd, 0x1c, 0xe0, A3>>8);
        adv7511_wr(sd, 0x1d, A3);
        adv7511_wr_and_or(sd, 0x1e, 0xe0, A4>>8);
        adv7511_wr(sd, 0x1f, A4);

        /* B */
        adv7511_wr_and_or(sd, 0x20, 0xe0, B1>>8);
        adv7511_wr(sd, 0x21, B1);
        adv7511_wr_and_or(sd, 0x22, 0xe0, B2>>8);
        adv7511_wr(sd, 0x23, B2);
        adv7511_wr_and_or(sd, 0x24, 0xe0, B3>>8);
        adv7511_wr(sd, 0x25, B3);
        adv7511_wr_and_or(sd, 0x26, 0xe0, B4>>8);
        adv7511_wr(sd, 0x27, B4);

        /* C */
        adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8);
        adv7511_wr(sd, 0x29, C1);
        adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8);
        adv7511_wr(sd, 0x2B, C2);
        adv7511_wr_and_or(sd, 0x2C, 0xe0, C3>>8);
        adv7511_wr(sd, 0x2D, C3);
        adv7511_wr_and_or(sd, 0x2E, 0xe0, C4>>8);
        adv7511_wr(sd, 0x2F, C4);
}

static void adv7511_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable)
{
        if (enable) {
                u8 csc_mode = 0;
                adv7511_csc_conversion_mode(sd, csc_mode);
                adv7511_csc_coeff(sd,
                                  4096-564, 0, 0, 256,
                                  0, 4096-564, 0, 256,
                                  0, 0, 4096-564, 256);
                /* enable CSC */
                adv7511_wr_and_or(sd, 0x18, 0x7f, 0x80);
                /* AVI infoframe: Limited range RGB (16-235) */
                adv7511_wr_and_or(sd, 0x57, 0xf3, 0x04);
        } else {
                /* disable CSC */
                adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
                /* AVI infoframe: Full range RGB (0-255) */
                adv7511_wr_and_or(sd, 0x57, 0xf3, 0x08);
        }
}

static void adv7511_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        /* Only makes sense for RGB formats */
        if (state->fmt_code != MEDIA_BUS_FMT_RGB888_1X24) {
                /* so just keep quantization */
                adv7511_csc_rgb_full2limit(sd, false);
                return;
        }

        switch (ctrl->val) {
        case V4L2_DV_RGB_RANGE_AUTO:
                /* automatic */
                if (state->dv_timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) {
                        /* CE format, RGB limited range (16-235) */
                        adv7511_csc_rgb_full2limit(sd, true);
                } else {
                        /* not CE format, RGB full range (0-255) */
                        adv7511_csc_rgb_full2limit(sd, false);
                }
                break;
        case V4L2_DV_RGB_RANGE_LIMITED:
                /* RGB limited range (16-235) */
                adv7511_csc_rgb_full2limit(sd, true);
                break;
        case V4L2_DV_RGB_RANGE_FULL:
                /* RGB full range (0-255) */
                adv7511_csc_rgb_full2limit(sd, false);
                break;
        }
}

/* ------------------------------ CTRL OPS ------------------------------ */

static int adv7511_s_ctrl(struct v4l2_ctrl *ctrl)
{
        struct v4l2_subdev *sd = to_sd(ctrl);
        struct adv7511_state *state = get_adv7511_state(sd);

        v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val);

        if (state->hdmi_mode_ctrl == ctrl) {
                /* Set HDMI or DVI-D */
                adv7511_wr_and_or(sd, 0xaf, 0xfd, ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00);
                return 0;
        }
        if (state->rgb_quantization_range_ctrl == ctrl) {
                adv7511_set_rgb_quantization_mode(sd, ctrl);
                return 0;
        }
        if (state->content_type_ctrl == ctrl) {
                u8 itc, cn;

                state->content_type = ctrl->val;
                itc = state->content_type != V4L2_DV_IT_CONTENT_TYPE_NO_ITC;
                cn = itc ? state->content_type : V4L2_DV_IT_CONTENT_TYPE_GRAPHICS;
                adv7511_wr_and_or(sd, 0x57, 0x7f, itc << 7);
                adv7511_wr_and_or(sd, 0x59, 0xcf, cn << 4);
                return 0;
        }

        return -EINVAL;
}

static const struct v4l2_ctrl_ops adv7511_ctrl_ops = {
        .s_ctrl = adv7511_s_ctrl,
};

/* ---------------------------- CORE OPS ------------------------------------------- */

#ifdef CONFIG_VIDEO_ADV_DEBUG
static void adv7511_inv_register(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        v4l2_info(sd, "0x000-0x0ff: Main Map\n");
        if (state->i2c_cec)
                v4l2_info(sd, "0x100-0x1ff: CEC Map\n");
}

static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        reg->size = 1;
        switch (reg->reg >> 8) {
        case 0:
                reg->val = adv7511_rd(sd, reg->reg & 0xff);
                break;
        case 1:
                if (state->i2c_cec) {
                        reg->val = adv7511_cec_read(sd, reg->reg & 0xff);
                        break;
                }
                /* fall through */
        default:
                v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
                adv7511_inv_register(sd);
                break;
        }
        return 0;
}

static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        switch (reg->reg >> 8) {
        case 0:
                adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff);
                break;
        case 1:
                if (state->i2c_cec) {
                        adv7511_cec_write(sd, reg->reg & 0xff, reg->val & 0xff);
                        break;
                }
                /* fall through */
        default:
                v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
                adv7511_inv_register(sd);
                break;
        }
        return 0;
}
#endif

struct adv7511_cfg_read_infoframe {
        const char *desc;
        u8 present_reg;
        u8 present_mask;
        u8 header[3];
        u16 payload_addr;
};

static u8 hdmi_infoframe_checksum(u8 *ptr, size_t size)
{
        u8 csum = 0;
        size_t i;

        /* compute checksum */
        for (i = 0; i < size; i++)
                csum += ptr[i];

        return 256 - csum;
}

static void log_infoframe(struct v4l2_subdev *sd, const struct adv7511_cfg_read_infoframe *cri)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        struct device *dev = &client->dev;
        union hdmi_infoframe frame;
        u8 buffer[32];
        u8 len;
        int i;

        if (!(adv7511_rd(sd, cri->present_reg) & cri->present_mask)) {
                v4l2_info(sd, "%s infoframe not transmitted\n", cri->desc);
                return;
        }

        memcpy(buffer, cri->header, sizeof(cri->header));

        len = buffer[2];

        if (len + 4 > sizeof(buffer)) {
                v4l2_err(sd, "%s: invalid %s infoframe length %d\n", __func__, cri->desc, len);
                return;
        }

        if (cri->payload_addr >= 0x100) {
                for (i = 0; i < len; i++)
                        buffer[i + 4] = adv7511_pktmem_rd(sd, cri->payload_addr + i - 0x100);
        } else {
                for (i = 0; i < len; i++)
                        buffer[i + 4] = adv7511_rd(sd, cri->payload_addr + i);
        }
        buffer[3] = 0;
        buffer[3] = hdmi_infoframe_checksum(buffer, len + 4);

        if (hdmi_infoframe_unpack(&frame, buffer) < 0) {
                v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc);
                return;
        }

        hdmi_infoframe_log(KERN_INFO, dev, &frame);
}

static void adv7511_log_infoframes(struct v4l2_subdev *sd)
{
        static const struct adv7511_cfg_read_infoframe cri[] = {
                { "AVI", 0x44, 0x10, { 0x82, 2, 13 }, 0x55 },
                { "Audio", 0x44, 0x08, { 0x84, 1, 10 }, 0x73 },
                { "SDP", 0x40, 0x40, { 0x83, 1, 25 }, 0x103 },
        };
        int i;

        for (i = 0; i < ARRAY_SIZE(cri); i++)
                log_infoframe(sd, &cri[i]);
}

static int adv7511_log_status(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        struct adv7511_state_edid *edid = &state->edid;
        int i;

        static const char * const states[] = {
                "in reset",
                "reading EDID",
                "idle",
                "initializing HDCP",
                "HDCP enabled",
                "initializing HDCP repeater",
                "6", "7", "8", "9", "A", "B", "C", "D", "E", "F"
        };
        static const char * const errors[] = {
                "no error",
                "bad receiver BKSV",
                "Ri mismatch",
                "Pj mismatch",
                "i2c error",
                "timed out",
                "max repeater cascade exceeded",
                "hash check failed",
                "too many devices",
                "9", "A", "B", "C", "D", "E", "F"
        };

        v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off");
        v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n",
                  (adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT) ? "detected" : "no",
                  (adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT) ? "detected" : "no",
                  edid->segments ? "found" : "no",
                  edid->blocks);
        v4l2_info(sd, "%s output %s\n",
                  (adv7511_rd(sd, 0xaf) & 0x02) ?
                  "HDMI" : "DVI-D",
                  (adv7511_rd(sd, 0xa1) & 0x3c) ?
                  "disabled" : "enabled");
        v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n",
                          states[adv7511_rd(sd, 0xc8) & 0xf],
                          errors[adv7511_rd(sd, 0xc8) >> 4], state->edid_detect_counter,
                          adv7511_rd(sd, 0x94), adv7511_rd(sd, 0x96));
        v4l2_info(sd, "RGB quantization: %s range\n", adv7511_rd(sd, 0x18) & 0x80 ? "limited" : "full");
        if (adv7511_rd(sd, 0xaf) & 0x02) {
                /* HDMI only */
                u8 manual_cts = adv7511_rd(sd, 0x0a) & 0x80;
                u32 N = (adv7511_rd(sd, 0x01) & 0xf) << 16 |
                        adv7511_rd(sd, 0x02) << 8 |
                        adv7511_rd(sd, 0x03);
                u8 vic_detect = adv7511_rd(sd, 0x3e) >> 2;
                u8 vic_sent = adv7511_rd(sd, 0x3d) & 0x3f;
                u32 CTS;

                if (manual_cts)
                        CTS = (adv7511_rd(sd, 0x07) & 0xf) << 16 |
                              adv7511_rd(sd, 0x08) << 8 |
                              adv7511_rd(sd, 0x09);
                else
                        CTS = (adv7511_rd(sd, 0x04) & 0xf) << 16 |
                              adv7511_rd(sd, 0x05) << 8 |
                              adv7511_rd(sd, 0x06);
                v4l2_info(sd, "CTS %s mode: N %d, CTS %d\n",
                          manual_cts ? "manual" : "automatic", N, CTS);
                v4l2_info(sd, "VIC: detected %d, sent %d\n",
                          vic_detect, vic_sent);
                adv7511_log_infoframes(sd);
        }
        if (state->dv_timings.type == V4L2_DV_BT_656_1120)
                v4l2_print_dv_timings(sd->name, "timings: ",
                                &state->dv_timings, false);
        else
                v4l2_info(sd, "no timings set\n");
        v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr);

        if (state->i2c_cec == NULL)
                return 0;

        v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr);

        v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
                        "enabled" : "disabled");
        if (state->cec_enabled_adap) {
                for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
                        bool is_valid = state->cec_valid_addrs & (1 << i);

                        if (is_valid)
                                v4l2_info(sd, "CEC Logical Address: 0x%x\n",
                                          state->cec_addr[i]);
                }
        }
        v4l2_info(sd, "i2c pktmem addr: 0x%x\n", state->i2c_pktmem_addr);
        return 0;
}

/* Power up/down adv7511 */
static int adv7511_s_power(struct v4l2_subdev *sd, int on)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        const int retries = 20;
        int i;

        v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off");

        state->power_on = on;

        if (!on) {
                /* Power down */
                adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
                return true;
        }

        /* Power up */
        /* The adv7511 does not always come up immediately.
           Retry multiple times. */
        for (i = 0; i < retries; i++) {
                adv7511_wr_and_or(sd, 0x41, 0xbf, 0x0);
                if ((adv7511_rd(sd, 0x41) & 0x40) == 0)
                        break;
                adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
                msleep(10);
        }
        if (i == retries) {
                v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__);
                adv7511_s_power(sd, 0);
                return false;
        }
        if (i > 1)
                v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i);

        /* Reserved registers that must be set */
        adv7511_wr(sd, 0x98, 0x03);
        adv7511_wr_and_or(sd, 0x9a, 0xfe, 0x70);
        adv7511_wr(sd, 0x9c, 0x30);
        adv7511_wr_and_or(sd, 0x9d, 0xfc, 0x01);
        adv7511_wr(sd, 0xa2, 0xa4);
        adv7511_wr(sd, 0xa3, 0xa4);
        adv7511_wr(sd, 0xe0, 0xd0);
        adv7511_wr(sd, 0xf9, 0x00);

        adv7511_wr(sd, 0x43, state->i2c_edid_addr);
        adv7511_wr(sd, 0x45, state->i2c_pktmem_addr);

        /* Set number of attempts to read the EDID */
        adv7511_wr(sd, 0xc9, 0xf);
        return true;
}

#if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC)
static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable)
{
        struct adv7511_state *state = cec_get_drvdata(adap);
        struct v4l2_subdev *sd = &state->sd;

        if (state->i2c_cec == NULL)
                return -EIO;

        if (!state->cec_enabled_adap && enable) {
                /* power up cec section */
                adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x01);
                /* legacy mode and clear all rx buffers */
                adv7511_cec_write(sd, 0x4a, 0x07);
                adv7511_cec_write(sd, 0x4a, 0);
                adv7511_cec_write_and_or(sd, 0x11, 0xfe, 0); /* initially disable tx */
                /* enabled irqs: */
                /* tx: ready */
                /* tx: arbitration lost */
                /* tx: retry timeout */
                /* rx: ready 1 */
                if (state->enabled_irq)
                        adv7511_wr_and_or(sd, 0x95, 0xc0, 0x39);
        } else if (state->cec_enabled_adap && !enable) {
                if (state->enabled_irq)
                        adv7511_wr_and_or(sd, 0x95, 0xc0, 0x00);
                /* disable address mask 1-3 */
                adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0x00);
                /* power down cec section */
                adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x00);
                state->cec_valid_addrs = 0;
        }
        state->cec_enabled_adap = enable;
        return 0;
}

static int adv7511_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
{
        struct adv7511_state *state = cec_get_drvdata(adap);
        struct v4l2_subdev *sd = &state->sd;
        unsigned int i, free_idx = ADV7511_MAX_ADDRS;

        if (!state->cec_enabled_adap)
                return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO;

        if (addr == CEC_LOG_ADDR_INVALID) {
                adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0);
                state->cec_valid_addrs = 0;
                return 0;
        }

        for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
                bool is_valid = state->cec_valid_addrs & (1 << i);

                if (free_idx == ADV7511_MAX_ADDRS && !is_valid)
                        free_idx = i;
                if (is_valid && state->cec_addr[i] == addr)
                        return 0;
        }
        if (i == ADV7511_MAX_ADDRS) {
                i = free_idx;
                if (i == ADV7511_MAX_ADDRS)
                        return -ENXIO;
        }
        state->cec_addr[i] = addr;
        state->cec_valid_addrs |= 1 << i;

        switch (i) {
        case 0:
                /* enable address mask 0 */
                adv7511_cec_write_and_or(sd, 0x4b, 0xef, 0x10);
                /* set address for mask 0 */
                adv7511_cec_write_and_or(sd, 0x4c, 0xf0, addr);
                break;
        case 1:
                /* enable address mask 1 */
                adv7511_cec_write_and_or(sd, 0x4b, 0xdf, 0x20);
                /* set address for mask 1 */
                adv7511_cec_write_and_or(sd, 0x4c, 0x0f, addr << 4);
                break;
        case 2:
                /* enable address mask 2 */
                adv7511_cec_write_and_or(sd, 0x4b, 0xbf, 0x40);
                /* set address for mask 1 */
                adv7511_cec_write_and_or(sd, 0x4d, 0xf0, addr);
                break;
        }
        return 0;
}

static int adv7511_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
                                     u32 signal_free_time, struct cec_msg *msg)
{
        struct adv7511_state *state = cec_get_drvdata(adap);
        struct v4l2_subdev *sd = &state->sd;
        u8 len = msg->len;
        unsigned int i;

        v4l2_dbg(1, debug, sd, "%s: len %d\n", __func__, len);

        if (len > 16) {
                v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
                return -EINVAL;
        }

        /*
         * The number of retries is the number of attempts - 1, but retry
         * at least once. It's not clear if a value of 0 is allowed, so
         * let's do at least one retry.
         */
        adv7511_cec_write_and_or(sd, 0x12, ~0x70, max(1, attempts - 1) << 4);

        /* blocking, clear cec tx irq status */
        adv7511_wr_and_or(sd, 0x97, 0xc7, 0x38);

        /* write data */
        for (i = 0; i < len; i++)
                adv7511_cec_write(sd, i, msg->msg[i]);

        /* set length (data + header) */
        adv7511_cec_write(sd, 0x10, len);
        /* start transmit, enable tx */
        adv7511_cec_write(sd, 0x11, 0x01);
        return 0;
}

static void adv_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        if ((adv7511_cec_read(sd, 0x11) & 0x01) == 0) {
                v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
                return;
        }

        if (tx_raw_status & 0x10) {
                v4l2_dbg(1, debug, sd,
                         "%s: tx raw: arbitration lost\n", __func__);
                cec_transmit_done(state->cec_adap, CEC_TX_STATUS_ARB_LOST,
                                  1, 0, 0, 0);
                return;
        }
        if (tx_raw_status & 0x08) {
                u8 status;
                u8 nack_cnt;
                u8 low_drive_cnt;

                v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
                /*
                 * We set this status bit since this hardware performs
                 * retransmissions.
                 */
                status = CEC_TX_STATUS_MAX_RETRIES;
                nack_cnt = adv7511_cec_read(sd, 0x14) & 0xf;
                if (nack_cnt)
                        status |= CEC_TX_STATUS_NACK;
                low_drive_cnt = adv7511_cec_read(sd, 0x14) >> 4;
                if (low_drive_cnt)
                        status |= CEC_TX_STATUS_LOW_DRIVE;
                cec_transmit_done(state->cec_adap, status,
                                  0, nack_cnt, low_drive_cnt, 0);
                return;
        }
        if (tx_raw_status & 0x20) {
                v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
                cec_transmit_done(state->cec_adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
                return;
        }
}

static const struct cec_adap_ops adv7511_cec_adap_ops = {
        .adap_enable = adv7511_cec_adap_enable,
        .adap_log_addr = adv7511_cec_adap_log_addr,
        .adap_transmit = adv7511_cec_adap_transmit,
};
#endif

/* Enable interrupts */
static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        u8 irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT;
        u8 irqs_rd;
        int retries = 100;

        v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");

        if (state->enabled_irq == enable)
                return;
        state->enabled_irq = enable;

        /* The datasheet says that the EDID ready interrupt should be
           disabled if there is no hotplug. */
        if (!enable)
                irqs = 0;
        else if (adv7511_have_hotplug(sd))
                irqs |= MASK_ADV7511_EDID_RDY_INT;

        adv7511_wr_and_or(sd, 0x95, 0xc0,
                          (state->cec_enabled_adap && enable) ? 0x39 : 0x00);

        /*
         * This i2c write can fail (approx. 1 in 1000 writes). But it
         * is essential that this register is correct, so retry it
         * multiple times.
         *
         * Note that the i2c write does not report an error, but the readback
         * clearly shows the wrong value.
         */
        do {
                adv7511_wr(sd, 0x94, irqs);
                irqs_rd = adv7511_rd(sd, 0x94);
        } while (retries-- && irqs_rd != irqs);

        if (irqs_rd == irqs)
                return;
        v4l2_err(sd, "Could not set interrupts: hw failure?\n");
}

/* Interrupt handler */
static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
{
        u8 irq_status;
        u8 cec_irq;

        /* disable interrupts to prevent a race condition */
        adv7511_set_isr(sd, false);
        irq_status = adv7511_rd(sd, 0x96);
        cec_irq = adv7511_rd(sd, 0x97);
        /* clear detected interrupts */
        adv7511_wr(sd, 0x96, irq_status);
        adv7511_wr(sd, 0x97, cec_irq);

        v4l2_dbg(1, debug, sd, "%s: irq 0x%x, cec-irq 0x%x\n", __func__,
                 irq_status, cec_irq);

        if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT))
                adv7511_check_monitor_present_status(sd);
        if (irq_status & MASK_ADV7511_EDID_RDY_INT)
                adv7511_check_edid_status(sd);

#if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC)
        if (cec_irq & 0x38)
                adv_cec_tx_raw_status(sd, cec_irq);

        if (cec_irq & 1) {
                struct adv7511_state *state = get_adv7511_state(sd);
                struct cec_msg msg;

                msg.len = adv7511_cec_read(sd, 0x25) & 0x1f;

                v4l2_dbg(1, debug, sd, "%s: cec msg len %d\n", __func__,
                         msg.len);

                if (msg.len > 16)
                        msg.len = 16;

                if (msg.len) {
                        u8 i;

                        for (i = 0; i < msg.len; i++)
                                msg.msg[i] = adv7511_cec_read(sd, i + 0x15);

                        adv7511_cec_write(sd, 0x4a, 1); /* toggle to re-enable rx 1 */
                        adv7511_cec_write(sd, 0x4a, 0);
                        cec_received_msg(state->cec_adap, &msg);
                }

        }
#endif

        /* enable interrupts */
        adv7511_set_isr(sd, true);

        if (handled)
                *handled = true;
        return 0;
}

static const struct v4l2_subdev_core_ops adv7511_core_ops = {
        .log_status = adv7511_log_status,
#ifdef CONFIG_VIDEO_ADV_DEBUG
        .g_register = adv7511_g_register,
        .s_register = adv7511_s_register,
#endif
        .s_power = adv7511_s_power,
        .interrupt_service_routine = adv7511_isr,
};

/* ------------------------------ VIDEO OPS ------------------------------ */

/* Enable/disable adv7511 output */
static int adv7511_s_stream(struct v4l2_subdev *sd, int enable)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
        adv7511_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c));
        if (enable) {
                adv7511_check_monitor_present_status(sd);
        } else {
                adv7511_s_power(sd, 0);
                state->have_monitor = false;
        }
        return 0;
}

static int adv7511_s_dv_timings(struct v4l2_subdev *sd,
                               struct v4l2_dv_timings *timings)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        struct v4l2_bt_timings *bt = &timings->bt;
        u32 fps;

        v4l2_dbg(1, debug, sd, "%s:\n", __func__);

        /* quick sanity check */
        if (!v4l2_valid_dv_timings(timings, &adv7511_timings_cap, NULL, NULL))
                return -EINVAL;

        /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
           if the format is one of the CEA or DMT timings. */
        v4l2_find_dv_timings_cap(timings, &adv7511_timings_cap, 0, NULL, NULL);

        /* save timings */
        state->dv_timings = *timings;

        /* set h/vsync polarities */
        adv7511_wr_and_or(sd, 0x17, 0x9f,
                ((bt->polarities & V4L2_DV_VSYNC_POS_POL) ? 0 : 0x40) |
                ((bt->polarities & V4L2_DV_HSYNC_POS_POL) ? 0 : 0x20));

        fps = (u32)bt->pixelclock / (V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt));
        switch (fps) {
        case 24:
                adv7511_wr_and_or(sd, 0xfb, 0xf9, 1 << 1);
                break;
        case 25:
                adv7511_wr_and_or(sd, 0xfb, 0xf9, 2 << 1);
                break;
        case 30:
                adv7511_wr_and_or(sd, 0xfb, 0xf9, 3 << 1);
                break;
        default:
                adv7511_wr_and_or(sd, 0xfb, 0xf9, 0);
                break;
        }

        /* update quantization range based on new dv_timings */
        adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl);

        return 0;
}

static int adv7511_g_dv_timings(struct v4l2_subdev *sd,
                                struct v4l2_dv_timings *timings)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        v4l2_dbg(1, debug, sd, "%s:\n", __func__);

        if (!timings)
                return -EINVAL;

        *timings = state->dv_timings;

        return 0;
}

static int adv7511_enum_dv_timings(struct v4l2_subdev *sd,
                                   struct v4l2_enum_dv_timings *timings)
{
        if (timings->pad != 0)
                return -EINVAL;

        return v4l2_enum_dv_timings_cap(timings, &adv7511_timings_cap, NULL, NULL);
}

static int adv7511_dv_timings_cap(struct v4l2_subdev *sd,
                                  struct v4l2_dv_timings_cap *cap)
{
        if (cap->pad != 0)
                return -EINVAL;

        *cap = adv7511_timings_cap;
        return 0;
}

static const struct v4l2_subdev_video_ops adv7511_video_ops = {
        .s_stream = adv7511_s_stream,
        .s_dv_timings = adv7511_s_dv_timings,
        .g_dv_timings = adv7511_g_dv_timings,
};

/* ------------------------------ AUDIO OPS ------------------------------ */
static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable)
{
        v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));

        if (enable)
                adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x80);
        else
                adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x40);

        return 0;
}

static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
{
        u32 N;

        switch (freq) {
        case 32000:  N = 4096;  break;
        case 44100:  N = 6272;  break;
        case 48000:  N = 6144;  break;
        case 88200:  N = 12544; break;
        case 96000:  N = 12288; break;
        case 176400: N = 25088; break;
        case 192000: N = 24576; break;
        default:
                return -EINVAL;
        }

        /* Set N (used with CTS to regenerate the audio clock) */
        adv7511_wr(sd, 0x01, (N >> 16) & 0xf);
        adv7511_wr(sd, 0x02, (N >> 8) & 0xff);
        adv7511_wr(sd, 0x03, N & 0xff);

        return 0;
}

static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
{
        u32 i2s_sf;

        switch (freq) {
        case 32000:  i2s_sf = 0x30; break;
        case 44100:  i2s_sf = 0x00; break;
        case 48000:  i2s_sf = 0x20; break;
        case 88200:  i2s_sf = 0x80; break;
        case 96000:  i2s_sf = 0xa0; break;
        case 176400: i2s_sf = 0xc0; break;
        case 192000: i2s_sf = 0xe0; break;
        default:
                return -EINVAL;
        }

        /* Set sampling frequency for I2S audio to 48 kHz */
        adv7511_wr_and_or(sd, 0x15, 0xf, i2s_sf);

        return 0;
}

static int adv7511_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config)
{
        /* Only 2 channels in use for application */
        adv7511_wr_and_or(sd, 0x73, 0xf8, 0x1);
        /* Speaker mapping */
        adv7511_wr(sd, 0x76, 0x00);

        /* 16 bit audio word length */
        adv7511_wr_and_or(sd, 0x14, 0xf0, 0x02);

        return 0;
}

static const struct v4l2_subdev_audio_ops adv7511_audio_ops = {
        .s_stream = adv7511_s_audio_stream,
        .s_clock_freq = adv7511_s_clock_freq,
        .s_i2s_clock_freq = adv7511_s_i2s_clock_freq,
        .s_routing = adv7511_s_routing,
};

/* ---------------------------- PAD OPS ------------------------------------- */

static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        memset(edid->reserved, 0, sizeof(edid->reserved));

        if (edid->pad != 0)
                return -EINVAL;

        if (edid->start_block == 0 && edid->blocks == 0) {
                edid->blocks = state->edid.segments * 2;
                return 0;
        }

        if (state->edid.segments == 0)
                return -ENODATA;

        if (edid->start_block >= state->edid.segments * 2)
                return -EINVAL;

        if (edid->start_block + edid->blocks > state->edid.segments * 2)
                edid->blocks = state->edid.segments * 2 - edid->start_block;

        memcpy(edid->edid, &state->edid.data[edid->start_block * 128],
                        128 * edid->blocks);

        return 0;
}

static int adv7511_enum_mbus_code(struct v4l2_subdev *sd,
                                  struct v4l2_subdev_pad_config *cfg,
                                  struct v4l2_subdev_mbus_code_enum *code)
{
        if (code->pad != 0)
                return -EINVAL;

        switch (code->index) {
        case 0:
                code->code = MEDIA_BUS_FMT_RGB888_1X24;
                break;
        case 1:
                code->code = MEDIA_BUS_FMT_YUYV8_1X16;
                break;
        case 2:
                code->code = MEDIA_BUS_FMT_UYVY8_1X16;
                break;
        default:
                return -EINVAL;
        }
        return 0;
}

static void adv7511_fill_format(struct adv7511_state *state,
                                struct v4l2_mbus_framefmt *format)
{
        format->width = state->dv_timings.bt.width;
        format->height = state->dv_timings.bt.height;
        format->field = V4L2_FIELD_NONE;
}

static int adv7511_get_fmt(struct v4l2_subdev *sd,
                           struct v4l2_subdev_pad_config *cfg,
                           struct v4l2_subdev_format *format)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        if (format->pad != 0)
                return -EINVAL;

        memset(&format->format, 0, sizeof(format->format));
        adv7511_fill_format(state, &format->format);

        if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
                struct v4l2_mbus_framefmt *fmt;

                fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
                format->format.code = fmt->code;
                format->format.colorspace = fmt->colorspace;
                format->format.ycbcr_enc = fmt->ycbcr_enc;
                format->format.quantization = fmt->quantization;
                format->format.xfer_func = fmt->xfer_func;
        } else {
                format->format.code = state->fmt_code;
                format->format.colorspace = state->colorspace;
                format->format.ycbcr_enc = state->ycbcr_enc;
                format->format.quantization = state->quantization;
                format->format.xfer_func = state->xfer_func;
        }

        return 0;
}

static int adv7511_set_fmt(struct v4l2_subdev *sd,
                           struct v4l2_subdev_pad_config *cfg,
                           struct v4l2_subdev_format *format)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        /*
         * Bitfield namings come the CEA-861-F standard, table 8 "Auxiliary
         * Video Information (AVI) InfoFrame Format"
         *
         * c = Colorimetry
         * ec = Extended Colorimetry
         * y = RGB or YCbCr
         * q = RGB Quantization Range
         * yq = YCC Quantization Range
         */
        u8 c = HDMI_COLORIMETRY_NONE;
        u8 ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
        u8 y = HDMI_COLORSPACE_RGB;
        u8 q = HDMI_QUANTIZATION_RANGE_DEFAULT;
        u8 yq = HDMI_YCC_QUANTIZATION_RANGE_LIMITED;
        u8 itc = state->content_type != V4L2_DV_IT_CONTENT_TYPE_NO_ITC;
        u8 cn = itc ? state->content_type : V4L2_DV_IT_CONTENT_TYPE_GRAPHICS;

        if (format->pad != 0)
                return -EINVAL;
        switch (format->format.code) {
        case MEDIA_BUS_FMT_UYVY8_1X16:
        case MEDIA_BUS_FMT_YUYV8_1X16:
        case MEDIA_BUS_FMT_RGB888_1X24:
                break;
        default:
                return -EINVAL;
        }

        adv7511_fill_format(state, &format->format);
        if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
                struct v4l2_mbus_framefmt *fmt;

                fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
                fmt->code = format->format.code;
                fmt->colorspace = format->format.colorspace;
                fmt->ycbcr_enc = format->format.ycbcr_enc;
                fmt->quantization = format->format.quantization;
                fmt->xfer_func = format->format.xfer_func;
                return 0;
        }

        switch (format->format.code) {
        case MEDIA_BUS_FMT_UYVY8_1X16:
                adv7511_wr_and_or(sd, 0x15, 0xf0, 0x01);
                adv7511_wr_and_or(sd, 0x16, 0x03, 0xb8);
                y = HDMI_COLORSPACE_YUV422;
                break;
        case MEDIA_BUS_FMT_YUYV8_1X16:
                adv7511_wr_and_or(sd, 0x15, 0xf0, 0x01);
                adv7511_wr_and_or(sd, 0x16, 0x03, 0xbc);
                y = HDMI_COLORSPACE_YUV422;
                break;
        case MEDIA_BUS_FMT_RGB888_1X24:
        default:
                adv7511_wr_and_or(sd, 0x15, 0xf0, 0x00);
                adv7511_wr_and_or(sd, 0x16, 0x03, 0x00);
                break;
        }
        state->fmt_code = format->format.code;
        state->colorspace = format->format.colorspace;
        state->ycbcr_enc = format->format.ycbcr_enc;
        state->quantization = format->format.quantization;
        state->xfer_func = format->format.xfer_func;

        switch (format->format.colorspace) {
        case V4L2_COLORSPACE_ADOBERGB:
                c = HDMI_COLORIMETRY_EXTENDED;
                ec = y ? HDMI_EXTENDED_COLORIMETRY_ADOBE_YCC_601 :
                         HDMI_EXTENDED_COLORIMETRY_ADOBE_RGB;
                break;
        case V4L2_COLORSPACE_SMPTE170M:
                c = y ? HDMI_COLORIMETRY_ITU_601 : HDMI_COLORIMETRY_NONE;
                if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_XV601) {
                        c = HDMI_COLORIMETRY_EXTENDED;
                        ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
                }
                break;
        case V4L2_COLORSPACE_REC709:
                c = y ? HDMI_COLORIMETRY_ITU_709 : HDMI_COLORIMETRY_NONE;
                if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_XV709) {
                        c = HDMI_COLORIMETRY_EXTENDED;
                        ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
                }
                break;
        case V4L2_COLORSPACE_SRGB:
                c = y ? HDMI_COLORIMETRY_EXTENDED : HDMI_COLORIMETRY_NONE;
                ec = y ? HDMI_EXTENDED_COLORIMETRY_S_YCC_601 :
                         HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
                break;
        case V4L2_COLORSPACE_BT2020:
                c = HDMI_COLORIMETRY_EXTENDED;
                if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_BT2020_CONST_LUM)
                        ec = 5; /* Not yet available in hdmi.h */
                else
                        ec = 6; /* Not yet available in hdmi.h */
                break;
        default:
                break;
        }

        /*
         * CEA-861-F says that for RGB formats the YCC range must match the
         * RGB range, although sources should ignore the YCC range.
         *
         * The RGB quantization range shouldn't be non-zero if the EDID doesn't
         * have the Q bit set in the Video Capabilities Data Block, however this
         * isn't checked at the moment. The assumption is that the application
         * knows the EDID and can detect this.
         *
         * The same is true for the YCC quantization range: non-standard YCC
         * quantization ranges should only be sent if the EDID has the YQ bit
         * set in the Video Capabilities Data Block.
         */
        switch (format->format.quantization) {
        case V4L2_QUANTIZATION_FULL_RANGE:
                q = y ? HDMI_QUANTIZATION_RANGE_DEFAULT :
                        HDMI_QUANTIZATION_RANGE_FULL;
                yq = q ? q - 1 : HDMI_YCC_QUANTIZATION_RANGE_FULL;
                break;
        case V4L2_QUANTIZATION_LIM_RANGE:
                q = y ? HDMI_QUANTIZATION_RANGE_DEFAULT :
                        HDMI_QUANTIZATION_RANGE_LIMITED;
                yq = q ? q - 1 : HDMI_YCC_QUANTIZATION_RANGE_LIMITED;
                break;
        }

        adv7511_wr_and_or(sd, 0x4a, 0xbf, 0);
        adv7511_wr_and_or(sd, 0x55, 0x9f, y << 5);
        adv7511_wr_and_or(sd, 0x56, 0x3f, c << 6);
        adv7511_wr_and_or(sd, 0x57, 0x83, (ec << 4) | (q << 2) | (itc << 7));
        adv7511_wr_and_or(sd, 0x59, 0x0f, (yq << 6) | (cn << 4));
        adv7511_wr_and_or(sd, 0x4a, 0xff, 1);
        adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl);

        return 0;
}

static const struct v4l2_subdev_pad_ops adv7511_pad_ops = {
        .get_edid = adv7511_get_edid,
        .enum_mbus_code = adv7511_enum_mbus_code,
        .get_fmt = adv7511_get_fmt,
        .set_fmt = adv7511_set_fmt,
        .enum_dv_timings = adv7511_enum_dv_timings,
        .dv_timings_cap = adv7511_dv_timings_cap,
};

/* --------------------- SUBDEV OPS --------------------------------------- */

static const struct v4l2_subdev_ops adv7511_ops = {
        .core  = &adv7511_core_ops,
        .pad  = &adv7511_pad_ops,
        .video = &adv7511_video_ops,
        .audio = &adv7511_audio_ops,
};

/* ----------------------------------------------------------------------- */
static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, u8 *buf)
{
        if (debug >= lvl) {
                int i, j;
                v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment);
                for (i = 0; i < 256; i += 16) {
                        u8 b[128];
                        u8 *bp = b;
                        if (i == 128)
                                v4l2_dbg(lvl, debug, sd, "\n");
                        for (j = i; j < i + 16; j++) {
                                sprintf(bp, "0x%02x, ", buf[j]);
                                bp += 6;
                        }
                        bp[0] = '\0';
                        v4l2_dbg(lvl, debug, sd, "%s\n", b);
                }
        }
}

static void adv7511_notify_no_edid(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        struct adv7511_edid_detect ed;

        /* We failed to read the EDID, so send an event for this. */
        ed.present = false;
        ed.segment = adv7511_rd(sd, 0xc4);
        ed.phys_addr = CEC_PHYS_ADDR_INVALID;
        cec_s_phys_addr(state->cec_adap, ed.phys_addr, false);
        v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
        v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x0);
}

static void adv7511_edid_handler(struct work_struct *work)
{
        struct delayed_work *dwork = to_delayed_work(work);
        struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
        struct v4l2_subdev *sd = &state->sd;

        v4l2_dbg(1, debug, sd, "%s:\n", __func__);

        if (adv7511_check_edid_status(sd)) {
                /* Return if we received the EDID. */
                return;
        }

        if (adv7511_have_hotplug(sd)) {
                /* We must retry reading the EDID several times, it is possible
                 * that initially the EDID couldn't be read due to i2c errors
                 * (DVI connectors are particularly prone to this problem). */
                if (state->edid.read_retries) {
                        state->edid.read_retries--;
                        v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__);
                        state->have_monitor = false;
                        adv7511_s_power(sd, false);
                        adv7511_s_power(sd, true);
                        queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
                        return;
                }
        }

        /* We failed to read the EDID, so send an event for this. */
        adv7511_notify_no_edid(sd);
        v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
}

static void adv7511_audio_setup(struct v4l2_subdev *sd)
{
        v4l2_dbg(1, debug, sd, "%s\n", __func__);

        adv7511_s_i2s_clock_freq(sd, 48000);
        adv7511_s_clock_freq(sd, 48000);
        adv7511_s_routing(sd, 0, 0, 0);
}

/* Configure hdmi transmitter. */
static void adv7511_setup(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        v4l2_dbg(1, debug, sd, "%s\n", __func__);

        /* Input format: RGB 4:4:4 */
        adv7511_wr_and_or(sd, 0x15, 0xf0, 0x0);
        /* Output format: RGB 4:4:4 */
        adv7511_wr_and_or(sd, 0x16, 0x7f, 0x0);
        /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, Aspect ratio: 16:9 */
        adv7511_wr_and_or(sd, 0x17, 0xf9, 0x06);
        /* Disable pixel repetition */
        adv7511_wr_and_or(sd, 0x3b, 0x9f, 0x0);
        /* Disable CSC */
        adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
        /* Output format: RGB 4:4:4, Active Format Information is valid,
         * underscanned */
        adv7511_wr_and_or(sd, 0x55, 0x9c, 0x12);
        /* AVI Info frame packet enable, Audio Info frame disable */
        adv7511_wr_and_or(sd, 0x44, 0xe7, 0x10);
        /* Colorimetry, Active format aspect ratio: same as picure. */
        adv7511_wr(sd, 0x56, 0xa8);
        /* No encryption */
        adv7511_wr_and_or(sd, 0xaf, 0xed, 0x0);

        /* Positive clk edge capture for input video clock */
        adv7511_wr_and_or(sd, 0xba, 0x1f, 0x60);

        adv7511_audio_setup(sd);

        v4l2_ctrl_handler_setup(&state->hdl);
}

static void adv7511_notify_monitor_detect(struct v4l2_subdev *sd)
{
        struct adv7511_monitor_detect mdt;
        struct adv7511_state *state = get_adv7511_state(sd);

        mdt.present = state->have_monitor;
        v4l2_subdev_notify(sd, ADV7511_MONITOR_DETECT, (void *)&mdt);
}

static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        /* read hotplug and rx-sense state */
        u8 status = adv7511_rd(sd, 0x42);

        v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n",
                         __func__,
                         status,
                         status & MASK_ADV7511_HPD_DETECT ? ", hotplug" : "",
                         status & MASK_ADV7511_MSEN_DETECT ? ", rx-sense" : "");

        /* update read only ctrls */
        v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
        v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);

        if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
                v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
                if (!state->have_monitor) {
                        v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__);
                        state->have_monitor = true;
                        adv7511_set_isr(sd, true);
                        if (!adv7511_s_power(sd, true)) {
                                v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__);
                                return;
                        }
                        adv7511_setup(sd);
                        adv7511_notify_monitor_detect(sd);
                        state->edid.read_retries = EDID_MAX_RETRIES;
                        queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
                }
        } else if (status & MASK_ADV7511_HPD_DETECT) {
                v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__);
                state->edid.read_retries = EDID_MAX_RETRIES;
                queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
        } else if (!(status & MASK_ADV7511_HPD_DETECT)) {
                v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__);
                if (state->have_monitor) {
                        v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__);
                        state->have_monitor = false;
                        adv7511_notify_monitor_detect(sd);
                }
                adv7511_s_power(sd, false);
                memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
                adv7511_notify_no_edid(sd);
        }
}

static bool edid_block_verify_crc(u8 *edid_block)
{
        u8 sum = 0;
        int i;

        for (i = 0; i < 128; i++)
                sum += edid_block[i];
        return sum == 0;
}

static bool edid_verify_crc(struct v4l2_subdev *sd, u32 segment)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        u32 blocks = state->edid.blocks;
        u8 *data = state->edid.data;

        if (!edid_block_verify_crc(&data[segment * 256]))
                return false;
        if ((segment + 1) * 2 <= blocks)
                return edid_block_verify_crc(&data[segment * 256 + 128]);
        return true;
}

static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment)
{
        static const u8 hdmi_header[] = {
                0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
        };
        struct adv7511_state *state = get_adv7511_state(sd);
        u8 *data = state->edid.data;

        if (segment != 0)
                return true;
        return !memcmp(data, hdmi_header, sizeof(hdmi_header));
}

static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        u8 edidRdy = adv7511_rd(sd, 0xc5);

        v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",
                         __func__, EDID_MAX_RETRIES - state->edid.read_retries);

        if (state->edid.complete)
                return true;

        if (edidRdy & MASK_ADV7511_EDID_RDY) {
                int segment = adv7511_rd(sd, 0xc4);
                struct adv7511_edid_detect ed;

                if (segment >= EDID_MAX_SEGM) {
                        v4l2_err(sd, "edid segment number too big\n");
                        return false;
                }
                v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment);
                adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]);
                adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]);
                if (segment == 0) {
                        state->edid.blocks = state->edid.data[0x7e] + 1;
                        v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks);
                }
                if (!edid_verify_crc(sd, segment) ||
                    !edid_verify_header(sd, segment)) {
                        /* edid crc error, force reread of edid segment */
                        v4l2_err(sd, "%s: edid crc or header error\n", __func__);
                        state->have_monitor = false;
                        adv7511_s_power(sd, false);
                        adv7511_s_power(sd, true);
                        return false;
                }
                /* one more segment read ok */
                state->edid.segments = segment + 1;
                v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x1);
                if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
                        /* Request next EDID segment */
                        v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
                        adv7511_wr(sd, 0xc9, 0xf);
                        adv7511_wr(sd, 0xc4, state->edid.segments);
                        state->edid.read_retries = EDID_MAX_RETRIES;
                        queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
                        return false;
                }

                v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments);
                state->edid.complete = true;
                ed.phys_addr = cec_get_edid_phys_addr(state->edid.data,
                                                      state->edid.segments * 256,
                                                      NULL);
                /* report when we have all segments
                   but report only for segment 0
                 */
                ed.present = true;
                ed.segment = 0;
                state->edid_detect_counter++;
                cec_s_phys_addr(state->cec_adap, ed.phys_addr, false);
                v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
                return ed.present;
        }

        return false;
}

static int adv7511_registered(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        int err;

        err = cec_register_adapter(state->cec_adap, &client->dev);
        if (err)
                cec_delete_adapter(state->cec_adap);
        return err;
}

static void adv7511_unregistered(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);

        cec_unregister_adapter(state->cec_adap);
}

static const struct v4l2_subdev_internal_ops adv7511_int_ops = {
        .registered = adv7511_registered,
        .unregistered = adv7511_unregistered,
};

/* ----------------------------------------------------------------------- */
/* Setup ADV7511 */
static void adv7511_init_setup(struct v4l2_subdev *sd)
{
        struct adv7511_state *state = get_adv7511_state(sd);
        struct adv7511_state_edid *edid = &state->edid;
        u32 cec_clk = state->pdata.cec_clk;
        u8 ratio;

        v4l2_dbg(1, debug, sd, "%s\n", __func__);

        /* clear all interrupts */
        adv7511_wr(sd, 0x96, 0xff);
        adv7511_wr(sd, 0x97, 0xff);
        /*
         * Stop HPD from resetting a lot of registers.
         * It might leave the chip in a partly un-initialized state,
         * in particular with regards to hotplug bounces.
         */
        adv7511_wr_and_or(sd, 0xd6, 0x3f, 0xc0);
        memset(edid, 0, sizeof(struct adv7511_state_edid));
        state->have_monitor = false;
        adv7511_set_isr(sd, false);
        adv7511_s_stream(sd, false);
        adv7511_s_audio_stream(sd, false);

        if (state->i2c_cec == NULL)
                return;

        v4l2_dbg(1, debug, sd, "%s: cec_clk %d\n", __func__, cec_clk);

        /* cec soft reset */
        adv7511_cec_write(sd, 0x50, 0x01);
        adv7511_cec_write(sd, 0x50, 0x00);

        /* legacy mode */
        adv7511_cec_write(sd, 0x4a, 0x00);

        if (cec_clk % 750000 != 0)
                v4l2_err(sd, "%s: cec_clk %d, not multiple of 750 Khz\n",
                         __func__, cec_clk);

        ratio = (cec_clk / 750000) - 1;
        adv7511_cec_write(sd, 0x4e, ratio << 2);
}

static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
        struct adv7511_state *state;
        struct adv7511_platform_data *pdata = client->dev.platform_data;
        struct v4l2_ctrl_handler *hdl;
        struct v4l2_subdev *sd;
        u8 chip_id[2];
        int err = -EIO;

        /* Check if the adapter supports the needed features */
        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -EIO;

        state = devm_kzalloc(&client->dev, sizeof(struct adv7511_state), GFP_KERNEL);
        if (!state)
                return -ENOMEM;

        /* Platform data */
        if (!pdata) {
                v4l_err(client, "No platform data!\n");
                return -ENODEV;
        }
        memcpy(&state->pdata, pdata, sizeof(state->pdata));
        state->fmt_code = MEDIA_BUS_FMT_RGB888_1X24;
        state->colorspace = V4L2_COLORSPACE_SRGB;

        sd = &state->sd;

        v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n",
                         client->addr << 1);

        v4l2_i2c_subdev_init(sd, client, &adv7511_ops);
        sd->internal_ops = &adv7511_int_ops;

        hdl = &state->hdl;
        v4l2_ctrl_handler_init(hdl, 10);
        /* add in ascending ID order */
        state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
                        V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
                        0, V4L2_DV_TX_MODE_DVI_D);
        state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL,
                        V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0);
        state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL,
                        V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0);
        state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL,
                        V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0);
        state->rgb_quantization_range_ctrl =
                v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
                        V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
                        0, V4L2_DV_RGB_RANGE_AUTO);
        state->content_type_ctrl =
                v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
                        V4L2_CID_DV_TX_IT_CONTENT_TYPE, V4L2_DV_IT_CONTENT_TYPE_NO_ITC,
                        0, V4L2_DV_IT_CONTENT_TYPE_NO_ITC);
        sd->ctrl_handler = hdl;
        if (hdl->error) {
                err = hdl->error;
                goto err_hdl;
        }
        state->pad.flags = MEDIA_PAD_FL_SINK;
        err = media_entity_pads_init(&sd->entity, 1, &state->pad);
        if (err)
                goto err_hdl;

        /* EDID and CEC i2c addr */
        state->i2c_edid_addr = state->pdata.i2c_edid << 1;
        state->i2c_cec_addr = state->pdata.i2c_cec << 1;
        state->i2c_pktmem_addr = state->pdata.i2c_pktmem << 1;

        state->chip_revision = adv7511_rd(sd, 0x0);
        chip_id[0] = adv7511_rd(sd, 0xf5);
        chip_id[1] = adv7511_rd(sd, 0xf6);
        if (chip_id[0] != 0x75 || chip_id[1] != 0x11) {
                v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0],
                         chip_id[1]);
                err = -EIO;
                goto err_entity;
        }

        state->i2c_edid = i2c_new_dummy(client->adapter,
                                        state->i2c_edid_addr >> 1);
        if (state->i2c_edid == NULL) {
                v4l2_err(sd, "failed to register edid i2c client\n");
                err = -ENOMEM;
                goto err_entity;
        }

        adv7511_wr(sd, 0xe1, state->i2c_cec_addr);
        if (state->pdata.cec_clk < 3000000 ||
            state->pdata.cec_clk > 100000000) {
                v4l2_err(sd, "%s: cec_clk %u outside range, disabling cec\n",
                                __func__, state->pdata.cec_clk);
                state->pdata.cec_clk = 0;
        }

        if (state->pdata.cec_clk) {
                state->i2c_cec = i2c_new_dummy(client->adapter,
                                               state->i2c_cec_addr >> 1);
                if (state->i2c_cec == NULL) {
                        v4l2_err(sd, "failed to register cec i2c client\n");
                        err = -ENOMEM;
                        goto err_unreg_edid;
                }
                adv7511_wr(sd, 0xe2, 0x00); /* power up cec section */
        } else {
                adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
        }

        state->i2c_pktmem = i2c_new_dummy(client->adapter, state->i2c_pktmem_addr >> 1);
        if (state->i2c_pktmem == NULL) {
                v4l2_err(sd, "failed to register pktmem i2c client\n");
                err = -ENOMEM;
                goto err_unreg_cec;
        }

        state->work_queue = create_singlethread_workqueue(sd->name);
        if (state->work_queue == NULL) {
                v4l2_err(sd, "could not create workqueue\n");
                err = -ENOMEM;
                goto err_unreg_pktmem;
        }

        INIT_DELAYED_WORK(&state->edid_handler, adv7511_edid_handler);

        adv7511_init_setup(sd);

#if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC)
        state->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
                state, dev_name(&client->dev), CEC_CAP_TRANSMIT |
                CEC_CAP_LOG_ADDRS | CEC_CAP_PASSTHROUGH | CEC_CAP_RC,
                ADV7511_MAX_ADDRS);
        err = PTR_ERR_OR_ZERO(state->cec_adap);
        if (err) {
                destroy_workqueue(state->work_queue);
                goto err_unreg_pktmem;
        }
#endif

        adv7511_set_isr(sd, true);
        adv7511_check_monitor_present_status(sd);

        v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
                          client->addr << 1, client->adapter->name);
        return 0;

err_unreg_pktmem:
        i2c_unregister_device(state->i2c_pktmem);
err_unreg_cec:
        if (state->i2c_cec)
                i2c_unregister_device(state->i2c_cec);
err_unreg_edid:
        i2c_unregister_device(state->i2c_edid);
err_entity:
        media_entity_cleanup(&sd->entity);
err_hdl:
        v4l2_ctrl_handler_free(&state->hdl);
        return err;
}

/* ----------------------------------------------------------------------- */

static int adv7511_remove(struct i2c_client *client)
{
        struct v4l2_subdev *sd = i2c_get_clientdata(client);
        struct adv7511_state *state = get_adv7511_state(sd);

        state->chip_revision = -1;

        v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,
                 client->addr << 1, client->adapter->name);

        adv7511_set_isr(sd, false);
        adv7511_init_setup(sd);
        cancel_delayed_work(&state->edid_handler);
        i2c_unregister_device(state->i2c_edid);
        if (state->i2c_cec)
                i2c_unregister_device(state->i2c_cec);
        i2c_unregister_device(state->i2c_pktmem);
        destroy_workqueue(state->work_queue);
        v4l2_device_unregister_subdev(sd);
        media_entity_cleanup(&sd->entity);
        v4l2_ctrl_handler_free(sd->ctrl_handler);
        return 0;
}

/* ----------------------------------------------------------------------- */

static struct i2c_device_id adv7511_id[] = {
        { "adv7511", 0 },
        { }
};
MODULE_DEVICE_TABLE(i2c, adv7511_id);

static struct i2c_driver adv7511_driver = {
        .driver = {
                .name = "adv7511",
        },
        .probe = adv7511_probe,
        .remove = adv7511_remove,

        .id_table = adv7511_id,
};

module_i2c_driver(adv7511_driver);