linux/drivers/media/pci/bt8xx/bttv-cards.c
<<
>>
Prefs
   1/*
   2
   3    bttv-cards.c
   4
   5    this file has configuration informations - card-specific stuff
   6    like the big tvcards array for the most part
   7
   8    Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                           & Marcus Metzler (mocm@thp.uni-koeln.de)
  10    (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12    This program is free software; you can redistribute it and/or modify
  13    it under the terms of the GNU General Public License as published by
  14    the Free Software Foundation; either version 2 of the License, or
  15    (at your option) any later version.
  16
  17    This program is distributed in the hope that it will be useful,
  18    but WITHOUT ANY WARRANTY; without even the implied warranty of
  19    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20    GNU General Public License for more details.
  21
  22    You should have received a copy of the GNU General Public License
  23    along with this program; if not, write to the Free Software
  24    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26*/
  27
  28#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  29
  30#include <linux/delay.h>
  31#include <linux/module.h>
  32#include <linux/kmod.h>
  33#include <linux/init.h>
  34#include <linux/pci.h>
  35#include <linux/vmalloc.h>
  36#include <linux/firmware.h>
  37#include <net/checksum.h>
  38
  39#include <asm/unaligned.h>
  40#include <asm/io.h>
  41
  42#include "bttvp.h"
  43#include <media/v4l2-common.h>
  44#include <media/i2c/tvaudio.h>
  45#include "bttv-audio-hook.h"
  46
  47/* fwd decl */
  48static void boot_msp34xx(struct bttv *btv, int pin);
  49static void hauppauge_eeprom(struct bttv *btv);
  50static void avermedia_eeprom(struct bttv *btv);
  51static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  52static void modtec_eeprom(struct bttv *btv);
  53static void init_PXC200(struct bttv *btv);
  54static void init_RTV24(struct bttv *btv);
  55static void init_PCI8604PW(struct bttv *btv);
  56
  57static void rv605_muxsel(struct bttv *btv, unsigned int input);
  58static void eagle_muxsel(struct bttv *btv, unsigned int input);
  59static void xguard_muxsel(struct bttv *btv, unsigned int input);
  60static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  61static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  62
  63static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  64
  65static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  66static void picolo_tetra_init(struct bttv *btv);
  67
  68static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  69static void tibetCS16_init(struct bttv *btv);
  70
  71static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  72static void kodicom4400r_init(struct bttv *btv);
  73
  74static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  75static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  76
  77static void geovision_muxsel(struct bttv *btv, unsigned int input);
  78
  79static void phytec_muxsel(struct bttv *btv, unsigned int input);
  80
  81static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  82static void gv800s_init(struct bttv *btv);
  83
  84static void td3116_muxsel(struct bttv *btv, unsigned int input);
  85
  86static int terratec_active_radio_upgrade(struct bttv *btv);
  87static int tea575x_init(struct bttv *btv);
  88static void identify_by_eeprom(struct bttv *btv,
  89                               unsigned char eeprom_data[256]);
  90static int pvr_boot(struct bttv *btv);
  91
  92/* config variables */
  93static unsigned int triton1;
  94static unsigned int vsfx;
  95static unsigned int latency = UNSET;
  96int no_overlay=-1;
  97
  98static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  99static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 100static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 101static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103static unsigned int audiodev[BTTV_MAX];
 104static unsigned int saa6588[BTTV_MAX];
 105static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 106static unsigned int autoload = UNSET;
 107static unsigned int gpiomask = UNSET;
 108static unsigned int audioall = UNSET;
 109static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 110
 111/* insmod options */
 112module_param(triton1,    int, 0444);
 113module_param(vsfx,       int, 0444);
 114module_param(no_overlay, int, 0444);
 115module_param(latency,    int, 0444);
 116module_param(gpiomask,   int, 0444);
 117module_param(audioall,   int, 0444);
 118module_param(autoload,   int, 0444);
 119
 120module_param_array(card,     int, NULL, 0444);
 121module_param_array(pll,      int, NULL, 0444);
 122module_param_array(tuner,    int, NULL, 0444);
 123module_param_array(svhs,     int, NULL, 0444);
 124module_param_array(remote,   int, NULL, 0444);
 125module_param_array(audiodev, int, NULL, 0444);
 126module_param_array(audiomux, int, NULL, 0444);
 127
 128MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
 129MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
 130MODULE_PARM_DESC(latency,"pci latency timer");
 131MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 132MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
 133MODULE_PARM_DESC(tuner,"specify installed tuner type");
 134MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 135MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 136                "\t\t-1 = no audio\n"
 137                "\t\t 0 = autodetect (default)\n"
 138                "\t\t 1 = msp3400\n"
 139                "\t\t 2 = tda7432\n"
 140                "\t\t 3 = tvaudio");
 141MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 142MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
 143
 144/* ----------------------------------------------------------------------- */
 145/* list of card IDs for bt878+ cards                                       */
 146
 147static struct CARD {
 148        unsigned id;
 149        int cardnr;
 150        char *name;
 151} cards[] = {
 152        { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 153        { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 154        { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 155        { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 156        { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 157        { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 158        { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 159        { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 160        { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 161
 162        { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 163        { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 164
 165        { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 166        { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 167        { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 168        { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 169        { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 170        { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 171        { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 172        { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 173        { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 174
 175        { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 176        /* some cards ship with byteswapped IDs ... */
 177        { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 178        { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 179        /* this seems to happen as well ... */
 180        { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 181
 182        { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 183        { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 184        { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 185
 186        { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 187        { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 188        { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 189        { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 190        { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 191        { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 192        { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 193
 194        { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 195        { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 196        { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 197        { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 198        { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 199
 200        { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 201        { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 202        { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 203        { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 204
 205        { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 206        { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 207        /* clashes with FlyVideo
 208         *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 209        { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 210        { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 211        { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 212        { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 213
 214        { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 215        { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 216        { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 217        { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 218        { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 219
 220        { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 221        { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 222        { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 223        { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 224        { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 225
 226        { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 227        { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 228        { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 229        { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 230
 231        { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 232        { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 233        { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 234        { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 235
 236        { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 237        { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 238        { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 239        { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 240        { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 241        { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 242        { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 243        { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 244        { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 245        { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 246        { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 247        { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 248        { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 249        { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 250        { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 251        { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 252        { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 253        { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 254        { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 255        { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 256        { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 257        { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 258        { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 259        { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 260        { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 261        { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 262        { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 263        { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 264        { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 265        { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 266        { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 267        { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 268        { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 269
 270        { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 271        { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 272
 273        { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 274        { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 275        { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 276        { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 277        { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 278        { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 279
 280        { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 281        { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 282
 283        { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 284        { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 285        { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 286        { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 287        { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 288        { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 289        { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 290        { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 291        { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 292        { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 293
 294        { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 295        { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 296
 297        { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 298        { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 299        { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 300        { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 301
 302        { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 303
 304        { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 305        { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 306
 307        /* likely broken, vendor id doesn't match the other magic views ...
 308         * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 309
 310        /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 311        * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 312
 313        { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 314
 315        /* DVB cards (using pci function .1 for mpeg data xfer) */
 316        { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 317        { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 318        { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 319        { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 320        { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 321        { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 322        { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 323        { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 324        { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 325        { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 326        { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 327        { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 328        { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 329        { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 330        { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 331        { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 332        { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 333        { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 334        { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 335
 336        { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 337        { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 338        { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 339        { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 340        { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 341        { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 342        { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 343        { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 344        { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 345        { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
 346        { 0, -1, NULL }
 347};
 348
 349/* ----------------------------------------------------------------------- */
 350/* array with description for bt848 / bt878 tv/grabber cards               */
 351
 352struct tvcard bttv_tvcards[] = {
 353        /* ---- card 0x00 ---------------------------------- */
 354        [BTTV_BOARD_UNKNOWN] = {
 355                .name           = " *** UNKNOWN/GENERIC *** ",
 356                .video_inputs   = 4,
 357                .svhs           = 2,
 358                .muxsel         = MUXSEL(2, 3, 1, 0),
 359                .tuner_type     = UNSET,
 360                .tuner_addr     = ADDR_UNSET,
 361        },
 362        [BTTV_BOARD_MIRO] = {
 363                .name           = "MIRO PCTV",
 364                .video_inputs   = 4,
 365                /* .audio_inputs= 1, */
 366                .svhs           = 2,
 367                .gpiomask       = 15,
 368                .muxsel         = MUXSEL(2, 3, 1, 1),
 369                .gpiomux        = { 2, 0, 0, 0 },
 370                .gpiomute       = 10,
 371                .tuner_type     = UNSET,
 372                .tuner_addr     = ADDR_UNSET,
 373        },
 374        [BTTV_BOARD_HAUPPAUGE] = {
 375                .name           = "Hauppauge (bt848)",
 376                .video_inputs   = 4,
 377                /* .audio_inputs= 1, */
 378                .svhs           = 2,
 379                .gpiomask       = 7,
 380                .muxsel         = MUXSEL(2, 3, 1, 1),
 381                .gpiomux        = { 0, 1, 2, 3 },
 382                .gpiomute       = 4,
 383                .tuner_type     = UNSET,
 384                .tuner_addr     = ADDR_UNSET,
 385        },
 386        [BTTV_BOARD_STB] = {
 387                .name           = "STB, Gateway P/N 6000699 (bt848)",
 388                .video_inputs   = 3,
 389                /* .audio_inputs= 1, */
 390                .svhs           = 2,
 391                .gpiomask       = 7,
 392                .muxsel         = MUXSEL(2, 3, 1, 1),
 393                .gpiomux        = { 4, 0, 2, 3 },
 394                .gpiomute       = 1,
 395                .no_msp34xx     = 1,
 396                .tuner_type     = TUNER_PHILIPS_NTSC,
 397                .tuner_addr     = ADDR_UNSET,
 398                .pll            = PLL_28,
 399                .has_radio      = 1,
 400        },
 401
 402        /* ---- card 0x04 ---------------------------------- */
 403        [BTTV_BOARD_INTEL] = {
 404                .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 405                .video_inputs   = 4,
 406                /* .audio_inputs= 0, */
 407                .svhs           = 2,
 408                .gpiomask       = 0,
 409                .muxsel         = MUXSEL(2, 3, 1, 1),
 410                .gpiomux        = { 0 },
 411                .tuner_type     = TUNER_ABSENT,
 412                .tuner_addr     = ADDR_UNSET,
 413        },
 414        [BTTV_BOARD_DIAMOND] = {
 415                .name           = "Diamond DTV2000",
 416                .video_inputs   = 4,
 417                /* .audio_inputs= 1, */
 418                .svhs           = 2,
 419                .gpiomask       = 3,
 420                .muxsel         = MUXSEL(2, 3, 1, 0),
 421                .gpiomux        = { 0, 1, 0, 1 },
 422                .gpiomute       = 3,
 423                .tuner_type     = UNSET,
 424                .tuner_addr     = ADDR_UNSET,
 425        },
 426        [BTTV_BOARD_AVERMEDIA] = {
 427                .name           = "AVerMedia TVPhone",
 428                .video_inputs   = 3,
 429                /* .audio_inputs= 1, */
 430                .svhs           = 3,
 431                .muxsel         = MUXSEL(2, 3, 1, 1),
 432                .gpiomask       = 0x0f,
 433                .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 434                /*                0x04 for some cards ?? */
 435                .tuner_type     = UNSET,
 436                .tuner_addr     = ADDR_UNSET,
 437                .audio_mode_gpio= avermedia_tvphone_audio,
 438                .has_remote     = 1,
 439        },
 440        [BTTV_BOARD_MATRIX_VISION] = {
 441                .name           = "MATRIX-Vision MV-Delta",
 442                .video_inputs   = 5,
 443                /* .audio_inputs= 1, */
 444                .svhs           = 3,
 445                .gpiomask       = 0,
 446                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 447                .gpiomux        = { 0 },
 448                .tuner_type     = TUNER_ABSENT,
 449                .tuner_addr     = ADDR_UNSET,
 450        },
 451
 452        /* ---- card 0x08 ---------------------------------- */
 453        [BTTV_BOARD_FLYVIDEO] = {
 454                .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 455                .video_inputs   = 4,
 456                /* .audio_inputs= 1, */
 457                .svhs           = 2,
 458                .gpiomask       = 0xc00,
 459                .muxsel         = MUXSEL(2, 3, 1, 1),
 460                .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 461                .gpiomute       = 0xc00,
 462                .pll            = PLL_28,
 463                .tuner_type     = UNSET,
 464                .tuner_addr     = ADDR_UNSET,
 465        },
 466        [BTTV_BOARD_TURBOTV] = {
 467                .name           = "IMS/IXmicro TurboTV",
 468                .video_inputs   = 3,
 469                /* .audio_inputs= 1, */
 470                .svhs           = 2,
 471                .gpiomask       = 3,
 472                .muxsel         = MUXSEL(2, 3, 1, 1),
 473                .gpiomux        = { 1, 1, 2, 3 },
 474                .pll            = PLL_28,
 475                .tuner_type     = TUNER_TEMIC_PAL,
 476                .tuner_addr     = ADDR_UNSET,
 477        },
 478        [BTTV_BOARD_HAUPPAUGE878] = {
 479                .name           = "Hauppauge (bt878)",
 480                .video_inputs   = 4,
 481                /* .audio_inputs= 1, */
 482                .svhs           = 2,
 483                .gpiomask       = 0x0f, /* old: 7 */
 484                .muxsel         = MUXSEL(2, 0, 1, 1),
 485                .gpiomux        = { 0, 1, 2, 3 },
 486                .gpiomute       = 4,
 487                .pll            = PLL_28,
 488                .tuner_type     = UNSET,
 489                .tuner_addr     = ADDR_UNSET,
 490        },
 491        [BTTV_BOARD_MIROPRO] = {
 492                .name           = "MIRO PCTV pro",
 493                .video_inputs   = 3,
 494                /* .audio_inputs= 1, */
 495                .svhs           = 2,
 496                .gpiomask       = 0x3014f,
 497                .muxsel         = MUXSEL(2, 3, 1, 1),
 498                .gpiomux        = { 0x20001,0x10001, 0, 0 },
 499                .gpiomute       = 10,
 500                .tuner_type     = UNSET,
 501                .tuner_addr     = ADDR_UNSET,
 502        },
 503
 504        /* ---- card 0x0c ---------------------------------- */
 505        [BTTV_BOARD_ADSTECH_TV] = {
 506                .name           = "ADS Technologies Channel Surfer TV (bt848)",
 507                .video_inputs   = 3,
 508                /* .audio_inputs= 1, */
 509                .svhs           = 2,
 510                .gpiomask       = 15,
 511                .muxsel         = MUXSEL(2, 3, 1, 1),
 512                .gpiomux        = { 13, 14, 11, 7 },
 513                .tuner_type     = UNSET,
 514                .tuner_addr     = ADDR_UNSET,
 515        },
 516        [BTTV_BOARD_AVERMEDIA98] = {
 517                .name           = "AVerMedia TVCapture 98",
 518                .video_inputs   = 3,
 519                /* .audio_inputs= 4, */
 520                .svhs           = 2,
 521                .gpiomask       = 15,
 522                .muxsel         = MUXSEL(2, 3, 1, 1),
 523                .gpiomux        = { 13, 14, 11, 7 },
 524                .msp34xx_alt    = 1,
 525                .pll            = PLL_28,
 526                .tuner_type     = TUNER_PHILIPS_PAL,
 527                .tuner_addr     = ADDR_UNSET,
 528                .audio_mode_gpio= avermedia_tv_stereo_audio,
 529                .no_gpioirq     = 1,
 530        },
 531        [BTTV_BOARD_VHX] = {
 532                .name           = "Aimslab Video Highway Xtreme (VHX)",
 533                .video_inputs   = 3,
 534                /* .audio_inputs= 1, */
 535                .svhs           = 2,
 536                .gpiomask       = 7,
 537                .muxsel         = MUXSEL(2, 3, 1, 1),
 538                .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 539                .gpiomute       = 4,
 540                .pll            = PLL_28,
 541                .tuner_type     = UNSET,
 542                .tuner_addr     = ADDR_UNSET,
 543        },
 544        [BTTV_BOARD_ZOLTRIX] = {
 545                .name           = "Zoltrix TV-Max",
 546                .video_inputs   = 3,
 547                /* .audio_inputs= 1, */
 548                .svhs           = 2,
 549                .gpiomask       = 15,
 550                .muxsel         = MUXSEL(2, 3, 1, 1),
 551                .gpiomux        = { 0, 0, 1, 0 },
 552                .gpiomute       = 10,
 553                .tuner_type     = UNSET,
 554                .tuner_addr     = ADDR_UNSET,
 555        },
 556
 557        /* ---- card 0x10 ---------------------------------- */
 558        [BTTV_BOARD_PIXVIEWPLAYTV] = {
 559                .name           = "Prolink Pixelview PlayTV (bt878)",
 560                .video_inputs   = 3,
 561                /* .audio_inputs= 1, */
 562                .svhs           = 2,
 563                .gpiomask       = 0x01fe00,
 564                .muxsel         = MUXSEL(2, 3, 1, 1),
 565                /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 566                .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 567                .gpiomute       = 0x002000,
 568                .pll            = PLL_28,
 569                .tuner_type     = UNSET,
 570                .tuner_addr     = ADDR_UNSET,
 571        },
 572        [BTTV_BOARD_WINVIEW_601] = {
 573                .name           = "Leadtek WinView 601",
 574                .video_inputs   = 3,
 575                /* .audio_inputs= 1, */
 576                .svhs           = 2,
 577                .gpiomask       = 0x8300f8,
 578                .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 579                .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 580                .gpiomute       = 0xcfa007,
 581                .tuner_type     = UNSET,
 582                .tuner_addr     = ADDR_UNSET,
 583                .volume_gpio    = winview_volume,
 584                .has_radio      = 1,
 585        },
 586        [BTTV_BOARD_AVEC_INTERCAP] = {
 587                .name           = "AVEC Intercapture",
 588                .video_inputs   = 3,
 589                /* .audio_inputs= 2, */
 590                .svhs           = 2,
 591                .gpiomask       = 0,
 592                .muxsel         = MUXSEL(2, 3, 1, 1),
 593                .gpiomux        = { 1, 0, 0, 0 },
 594                .tuner_type     = UNSET,
 595                .tuner_addr     = ADDR_UNSET,
 596        },
 597        [BTTV_BOARD_LIFE_FLYKIT] = {
 598                .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 599                .video_inputs   = 4,
 600                /* .audio_inputs= 1, */
 601                .svhs           = NO_SVHS,
 602                .gpiomask       = 0x8dff00,
 603                .muxsel         = MUXSEL(2, 3, 1, 1),
 604                .gpiomux        = { 0 },
 605                .no_msp34xx     = 1,
 606                .tuner_type     = TUNER_ABSENT,
 607                .tuner_addr     = ADDR_UNSET,
 608        },
 609
 610        /* ---- card 0x14 ---------------------------------- */
 611        [BTTV_BOARD_CEI_RAFFLES] = {
 612                .name           = "CEI Raffles Card",
 613                .video_inputs   = 3,
 614                /* .audio_inputs= 3, */
 615                .svhs           = 2,
 616                .muxsel         = MUXSEL(2, 3, 1, 1),
 617                .tuner_type     = UNSET,
 618                .tuner_addr     = ADDR_UNSET,
 619        },
 620        [BTTV_BOARD_CONFERENCETV] = {
 621                .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 622                .video_inputs   = 4,
 623                /* .audio_inputs= 2,  tuner, line in */
 624                .svhs           = 2,
 625                .gpiomask       = 0x1800,
 626                .muxsel         = MUXSEL(2, 3, 1, 1),
 627                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 628                .gpiomute       = 0x1800,
 629                .pll            = PLL_28,
 630                .tuner_type     = TUNER_PHILIPS_PAL_I,
 631                .tuner_addr     = ADDR_UNSET,
 632        },
 633        [BTTV_BOARD_PHOEBE_TVMAS] = {
 634                .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 635                .video_inputs   = 3,
 636                /* .audio_inputs= 1, */
 637                .svhs           = 2,
 638                .gpiomask       = 0xc00,
 639                .muxsel         = MUXSEL(2, 3, 1, 1),
 640                .gpiomux        = { 0, 1, 0x800, 0x400 },
 641                .gpiomute       = 0xc00,
 642                .pll            = PLL_28,
 643                .tuner_type     = UNSET,
 644                .tuner_addr     = ADDR_UNSET,
 645        },
 646        [BTTV_BOARD_MODTEC_205] = {
 647                .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 648                .video_inputs   = 3,
 649                /* .audio_inputs= 1, */
 650                .svhs           = NO_SVHS,
 651                .has_dig_in     = 1,
 652                .gpiomask       = 7,
 653                .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 654                /* .digital_mode= DIGITAL_MODE_CAMERA, */
 655                .gpiomux        = { 0, 0, 0, 0 },
 656                .no_msp34xx     = 1,
 657                .pll            = PLL_28,
 658                .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 659                .tuner_addr     = ADDR_UNSET,
 660        },
 661
 662        /* ---- card 0x18 ---------------------------------- */
 663        [BTTV_BOARD_MAGICTVIEW061] = {
 664                .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 665                .video_inputs   = 3,
 666                /* .audio_inputs= 1, */
 667                .svhs           = 2,
 668                .gpiomask       = 0xe00,
 669                .muxsel         = MUXSEL(2, 3, 1, 1),
 670                .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 671                .gpiomute       = 0xc00,
 672                .pll            = PLL_28,
 673                .tuner_type     = UNSET,
 674                .tuner_addr     = ADDR_UNSET,
 675                .has_remote     = 1,
 676                .has_radio      = 1,  /* not every card has radio */
 677        },
 678        [BTTV_BOARD_VOBIS_BOOSTAR] = {
 679                .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 680                .video_inputs   = 3,
 681                /* .audio_inputs= 1, */
 682                .svhs           = 2,
 683                .gpiomask       = 0x1f0fff,
 684                .muxsel         = MUXSEL(2, 3, 1, 1),
 685                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 686                .gpiomute       = 0x40000,
 687                .tuner_type     = TUNER_PHILIPS_PAL,
 688                .tuner_addr     = ADDR_UNSET,
 689                .audio_mode_gpio= terratv_audio,
 690        },
 691        [BTTV_BOARD_HAUPPAUG_WCAM] = {
 692                .name           = "Hauppauge WinCam newer (bt878)",
 693                .video_inputs   = 4,
 694                /* .audio_inputs= 1, */
 695                .svhs           = 3,
 696                .gpiomask       = 7,
 697                .muxsel         = MUXSEL(2, 0, 1, 1),
 698                .gpiomux        = { 0, 1, 2, 3 },
 699                .gpiomute       = 4,
 700                .tuner_type     = UNSET,
 701                .tuner_addr     = ADDR_UNSET,
 702        },
 703        [BTTV_BOARD_MAXI] = {
 704                .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 705                .video_inputs   = 4,
 706                /* .audio_inputs= 2, */
 707                .svhs           = 2,
 708                .gpiomask       = 0x1800,
 709                .muxsel         = MUXSEL(2, 3, 1, 1),
 710                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 711                .gpiomute       = 0x1800,
 712                .pll            = PLL_28,
 713                .tuner_type     = TUNER_PHILIPS_SECAM,
 714                .tuner_addr     = ADDR_UNSET,
 715        },
 716
 717        /* ---- card 0x1c ---------------------------------- */
 718        [BTTV_BOARD_TERRATV] = {
 719                .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 720                .video_inputs   = 3,
 721                /* .audio_inputs= 1, */
 722                .svhs           = 2,
 723                .gpiomask       = 0x1f0fff,
 724                .muxsel         = MUXSEL(2, 3, 1, 1),
 725                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 726                .gpiomute       = 0x40000,
 727                .tuner_type     = TUNER_PHILIPS_PAL,
 728                .tuner_addr     = ADDR_UNSET,
 729                .audio_mode_gpio= terratv_audio,
 730                /* GPIO wiring:
 731                External 20 pin connector (for Active Radio Upgrade board)
 732                gpio00: i2c-sda
 733                gpio01: i2c-scl
 734                gpio02: om5610-data
 735                gpio03: om5610-clk
 736                gpio04: om5610-wre
 737                gpio05: om5610-stereo
 738                gpio06: rds6588-davn
 739                gpio07: Pin 7 n.c.
 740                gpio08: nIOW
 741                gpio09+10: nIOR, nSEL ?? (bt878)
 742                        gpio09: nIOR (bt848)
 743                        gpio10: nSEL (bt848)
 744                Sound Routing:
 745                gpio16: u2-A0 (1st 4052bt)
 746                gpio17: u2-A1
 747                gpio18: u2-nEN
 748                gpio19: u4-A0 (2nd 4052)
 749                gpio20: u4-A1
 750                        u4-nEN - GND
 751                Btspy:
 752                        00000 : Cdrom (internal audio input)
 753                        10000 : ext. Video audio input
 754                        20000 : TV Mono
 755                        a0000 : TV Mono/2
 756                1a0000 : TV Stereo
 757                        30000 : Radio
 758                        40000 : Mute
 759        */
 760
 761        },
 762        [BTTV_BOARD_PXC200] = {
 763                /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 764                .name           = "Imagenation PXC200",
 765                .video_inputs   = 5,
 766                /* .audio_inputs= 1, */
 767                .svhs           = 1, /* was: 4 */
 768                .gpiomask       = 0,
 769                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 770                .gpiomux        = { 0 },
 771                .tuner_type     = TUNER_ABSENT,
 772                .tuner_addr     = ADDR_UNSET,
 773                .muxsel_hook    = PXC200_muxsel,
 774
 775        },
 776        [BTTV_BOARD_FLYVIDEO_98] = {
 777                .name           = "Lifeview FlyVideo 98 LR50",
 778                .video_inputs   = 4,
 779                /* .audio_inputs= 1, */
 780                .svhs           = 2,
 781                .gpiomask       = 0x1800,  /* 0x8dfe00 */
 782                .muxsel         = MUXSEL(2, 3, 1, 1),
 783                .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 784                .gpiomute       = 0x1800,
 785                .pll            = PLL_28,
 786                .tuner_type     = UNSET,
 787                .tuner_addr     = ADDR_UNSET,
 788        },
 789        [BTTV_BOARD_IPROTV] = {
 790                .name           = "Formac iProTV, Formac ProTV I (bt848)",
 791                .video_inputs   = 4,
 792                /* .audio_inputs= 1, */
 793                .svhs           = 3,
 794                .gpiomask       = 1,
 795                .muxsel         = MUXSEL(2, 3, 1, 1),
 796                .gpiomux        = { 1, 0, 0, 0 },
 797                .pll            = PLL_28,
 798                .tuner_type     = TUNER_PHILIPS_PAL,
 799                .tuner_addr     = ADDR_UNSET,
 800        },
 801
 802        /* ---- card 0x20 ---------------------------------- */
 803        [BTTV_BOARD_INTEL_C_S_PCI] = {
 804                .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 805                .video_inputs   = 4,
 806                /* .audio_inputs= 0, */
 807                .svhs           = 2,
 808                .gpiomask       = 0,
 809                .muxsel         = MUXSEL(2, 3, 1, 1),
 810                .gpiomux        = { 0 },
 811                .tuner_type     = TUNER_ABSENT,
 812                .tuner_addr     = ADDR_UNSET,
 813        },
 814        [BTTV_BOARD_TERRATVALUE] = {
 815                .name           = "Terratec TerraTValue Version Bt878",
 816                .video_inputs   = 3,
 817                /* .audio_inputs= 1, */
 818                .svhs           = 2,
 819                .gpiomask       = 0xffff00,
 820                .muxsel         = MUXSEL(2, 3, 1, 1),
 821                .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 822                .gpiomute       = 0x900,
 823                .pll            = PLL_28,
 824                .tuner_type     = TUNER_PHILIPS_PAL,
 825                .tuner_addr     = ADDR_UNSET,
 826        },
 827        [BTTV_BOARD_WINFAST2000] = {
 828                .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 829                .video_inputs   = 4,
 830                /* .audio_inputs= 1, */
 831                .svhs           = 2,
 832                /* TV, CVid, SVid, CVid over SVid connector */
 833                .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 834                /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 835                .gpiomask       = 0xb33000,
 836                .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 837                .gpiomute       = 0x800000,
 838                /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 839                        gpio23 -- hef4052:nEnable (0x800000)
 840                        gpio12 -- hef4052:A1
 841                        gpio13 -- hef4052:A0
 842                0x0000: external audio
 843                0x1000: FM
 844                0x2000: TV
 845                0x3000: n.c.
 846                Note: There exists another variant "Winfast 2000" with tv stereo !?
 847                Note: eeprom only contains FF and pci subsystem id 107d:6606
 848                */
 849                .pll            = PLL_28,
 850                .has_radio      = 1,
 851                .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 852                .tuner_addr     = ADDR_UNSET,
 853                .audio_mode_gpio= winfast2000_audio,
 854                .has_remote     = 1,
 855        },
 856        [BTTV_BOARD_CHRONOS_VS2] = {
 857                .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 858                .video_inputs   = 4,
 859                /* .audio_inputs= 3, */
 860                .svhs           = 2,
 861                .gpiomask       = 0x1800,
 862                .muxsel         = MUXSEL(2, 3, 1, 1),
 863                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 864                .gpiomute       = 0x1800,
 865                .pll            = PLL_28,
 866                .tuner_type     = UNSET,
 867                .tuner_addr     = ADDR_UNSET,
 868        },
 869
 870        /* ---- card 0x24 ---------------------------------- */
 871        [BTTV_BOARD_TYPHOON_TVIEW] = {
 872                .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 873                .video_inputs   = 4,
 874                /* .audio_inputs= 3, */
 875                .svhs           = 2,
 876                .gpiomask       = 0x1800,
 877                .muxsel         = MUXSEL(2, 3, 1, 1),
 878                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 879                .gpiomute       = 0x1800,
 880                .pll            = PLL_28,
 881                .tuner_type     = UNSET,
 882                .tuner_addr     = ADDR_UNSET,
 883                .has_radio      = 1,
 884        },
 885        [BTTV_BOARD_PXELVWPLTVPRO] = {
 886                .name           = "Prolink PixelView PlayTV pro",
 887                .video_inputs   = 3,
 888                /* .audio_inputs= 1, */
 889                .svhs           = 2,
 890                .gpiomask       = 0xff,
 891                .muxsel         = MUXSEL(2, 3, 1, 1),
 892                .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 893                .gpiomute       = 0x29,
 894                .no_msp34xx     = 1,
 895                .pll            = PLL_28,
 896                .tuner_type     = UNSET,
 897                .tuner_addr     = ADDR_UNSET,
 898        },
 899        [BTTV_BOARD_MAGICTVIEW063] = {
 900                .name           = "Askey CPH06X TView99",
 901                .video_inputs   = 4,
 902                /* .audio_inputs= 1, */
 903                .svhs           = 2,
 904                .gpiomask       = 0x551e00,
 905                .muxsel         = MUXSEL(2, 3, 1, 0),
 906                .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 907                .gpiomute       = 0x551c00,
 908                .pll            = PLL_28,
 909                .tuner_type     = TUNER_PHILIPS_PAL_I,
 910                .tuner_addr     = ADDR_UNSET,
 911                .has_remote     = 1,
 912        },
 913        [BTTV_BOARD_PINNACLE] = {
 914                .name           = "Pinnacle PCTV Studio/Rave",
 915                .video_inputs   = 3,
 916                /* .audio_inputs= 1, */
 917                .svhs           = 2,
 918                .gpiomask       = 0x03000F,
 919                .muxsel         = MUXSEL(2, 3, 1, 1),
 920                .gpiomux        = { 2, 0xd0001, 0, 0 },
 921                .gpiomute       = 1,
 922                .pll            = PLL_28,
 923                .tuner_type     = UNSET,
 924                .tuner_addr     = ADDR_UNSET,
 925        },
 926
 927        /* ---- card 0x28 ---------------------------------- */
 928        [BTTV_BOARD_STB2] = {
 929                .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 930                .video_inputs   = 3,
 931                /* .audio_inputs= 1, */
 932                .svhs           = 2,
 933                .gpiomask       = 7,
 934                .muxsel         = MUXSEL(2, 3, 1, 1),
 935                .gpiomux        = { 4, 0, 2, 3 },
 936                .gpiomute       = 1,
 937                .no_msp34xx     = 1,
 938                .tuner_type     = TUNER_PHILIPS_NTSC,
 939                .tuner_addr     = ADDR_UNSET,
 940                .pll            = PLL_28,
 941                .has_radio      = 1,
 942        },
 943        [BTTV_BOARD_AVPHONE98] = {
 944                .name           = "AVerMedia TVPhone 98",
 945                .video_inputs   = 3,
 946                /* .audio_inputs= 4, */
 947                .svhs           = 2,
 948                .gpiomask       = 15,
 949                .muxsel         = MUXSEL(2, 3, 1, 1),
 950                .gpiomux        = { 13, 4, 11, 7 },
 951                .pll            = PLL_28,
 952                .tuner_type     = UNSET,
 953                .tuner_addr     = ADDR_UNSET,
 954                .has_radio      = 1,
 955                .audio_mode_gpio= avermedia_tvphone_audio,
 956        },
 957        [BTTV_BOARD_PV951] = {
 958                .name           = "ProVideo PV951", /* pic16c54 */
 959                .video_inputs   = 3,
 960                /* .audio_inputs= 1, */
 961                .svhs           = 2,
 962                .gpiomask       = 0,
 963                .muxsel         = MUXSEL(2, 3, 1, 1),
 964                .gpiomux        = { 0, 0, 0, 0},
 965                .no_msp34xx     = 1,
 966                .pll            = PLL_28,
 967                .tuner_type     = TUNER_PHILIPS_PAL_I,
 968                .tuner_addr     = ADDR_UNSET,
 969        },
 970        [BTTV_BOARD_ONAIR_TV] = {
 971                .name           = "Little OnAir TV",
 972                .video_inputs   = 3,
 973                /* .audio_inputs= 1, */
 974                .svhs           = 2,
 975                .gpiomask       = 0xe00b,
 976                .muxsel         = MUXSEL(2, 3, 1, 1),
 977                .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
 978                .gpiomute       = 0xff3ffc,
 979                .no_msp34xx     = 1,
 980                .tuner_type     = UNSET,
 981                .tuner_addr     = ADDR_UNSET,
 982        },
 983
 984        /* ---- card 0x2c ---------------------------------- */
 985        [BTTV_BOARD_SIGMA_TVII_FM] = {
 986                .name           = "Sigma TVII-FM",
 987                .video_inputs   = 2,
 988                /* .audio_inputs= 1, */
 989                .svhs           = NO_SVHS,
 990                .gpiomask       = 3,
 991                .muxsel         = MUXSEL(2, 3, 1, 1),
 992                .gpiomux        = { 1, 1, 0, 2 },
 993                .gpiomute       = 3,
 994                .no_msp34xx     = 1,
 995                .pll            = PLL_NONE,
 996                .tuner_type     = UNSET,
 997                .tuner_addr     = ADDR_UNSET,
 998        },
 999        [BTTV_BOARD_MATRIX_VISION2] = {
1000                .name           = "MATRIX-Vision MV-Delta 2",
1001                .video_inputs   = 5,
1002                /* .audio_inputs= 1, */
1003                .svhs           = 3,
1004                .gpiomask       = 0,
1005                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1006                .gpiomux        = { 0 },
1007                .no_msp34xx     = 1,
1008                .pll            = PLL_28,
1009                .tuner_type     = TUNER_ABSENT,
1010                .tuner_addr     = ADDR_UNSET,
1011        },
1012        [BTTV_BOARD_ZOLTRIX_GENIE] = {
1013                .name           = "Zoltrix Genie TV/FM",
1014                .video_inputs   = 3,
1015                /* .audio_inputs= 1, */
1016                .svhs           = 2,
1017                .gpiomask       = 0xbcf03f,
1018                .muxsel         = MUXSEL(2, 3, 1, 1),
1019                .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1020                .gpiomute       = 0xbcb03f,
1021                .no_msp34xx     = 1,
1022                .pll            = PLL_28,
1023                .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1024                .tuner_addr     = ADDR_UNSET,
1025        },
1026        [BTTV_BOARD_TERRATVRADIO] = {
1027                .name           = "Terratec TV/Radio+",
1028                .video_inputs   = 3,
1029                /* .audio_inputs= 1, */
1030                .svhs           = 2,
1031                .gpiomask       = 0x70000,
1032                .muxsel         = MUXSEL(2, 3, 1, 1),
1033                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1034                .gpiomute       = 0x40000,
1035                .no_msp34xx     = 1,
1036                .pll            = PLL_35,
1037                .tuner_type     = TUNER_PHILIPS_PAL_I,
1038                .tuner_addr     = ADDR_UNSET,
1039                .has_radio      = 1,
1040        },
1041
1042        /* ---- card 0x30 ---------------------------------- */
1043        [BTTV_BOARD_DYNALINK] = {
1044                .name           = "Askey CPH03x/ Dynalink Magic TView",
1045                .video_inputs   = 3,
1046                /* .audio_inputs= 1, */
1047                .svhs           = 2,
1048                .gpiomask       = 15,
1049                .muxsel         = MUXSEL(2, 3, 1, 1),
1050                .gpiomux        = {2,0,0,0 },
1051                .gpiomute       = 1,
1052                .pll            = PLL_28,
1053                .tuner_type     = UNSET,
1054                .tuner_addr     = ADDR_UNSET,
1055        },
1056        [BTTV_BOARD_GVBCTV3PCI] = {
1057                .name           = "IODATA GV-BCTV3/PCI",
1058                .video_inputs   = 3,
1059                /* .audio_inputs= 1, */
1060                .svhs           = 2,
1061                .gpiomask       = 0x010f00,
1062                .muxsel         = MUXSEL(2, 3, 0, 0),
1063                .gpiomux        = {0x10000, 0, 0x10000, 0 },
1064                .no_msp34xx     = 1,
1065                .pll            = PLL_28,
1066                .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1067                .tuner_addr     = ADDR_UNSET,
1068                .audio_mode_gpio= gvbctv3pci_audio,
1069        },
1070        [BTTV_BOARD_PXELVWPLTVPAK] = {
1071                .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1072                .video_inputs   = 5,
1073                /* .audio_inputs= 1, */
1074                .svhs           = 3,
1075                .has_dig_in     = 1,
1076                .gpiomask       = 0xAA0000,
1077                .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1078                /* .digital_mode= DIGITAL_MODE_CAMERA, */
1079                .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1080                .gpiomute       = 0xa8000,
1081                .no_msp34xx     = 1,
1082                .pll            = PLL_28,
1083                .tuner_type     = TUNER_PHILIPS_PAL_I,
1084                .tuner_addr     = ADDR_UNSET,
1085                .has_remote     = 1,
1086                /* GPIO wiring: (different from Rev.4C !)
1087                        GPIO17: U4.A0 (first hef4052bt)
1088                        GPIO19: U4.A1
1089                        GPIO20: U5.A1 (second hef4052bt)
1090                        GPIO21: U4.nEN
1091                        GPIO22: BT832 Reset Line
1092                        GPIO23: A5,A0, U5,nEN
1093                Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1094                */
1095        },
1096        [BTTV_BOARD_EAGLE] = {
1097                .name           = "Eagle Wireless Capricorn2 (bt878A)",
1098                .video_inputs   = 4,
1099                /* .audio_inputs= 1, */
1100                .svhs           = 2,
1101                .gpiomask       = 7,
1102                .muxsel         = MUXSEL(2, 0, 1, 1),
1103                .gpiomux        = { 0, 1, 2, 3 },
1104                .gpiomute       = 4,
1105                .pll            = PLL_28,
1106                .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1107                .tuner_addr     = ADDR_UNSET,
1108        },
1109
1110        /* ---- card 0x34 ---------------------------------- */
1111        [BTTV_BOARD_PINNACLEPRO] = {
1112                /* David Härdeman <david@2gen.com> */
1113                .name           = "Pinnacle PCTV Studio Pro",
1114                .video_inputs   = 4,
1115                /* .audio_inputs= 1, */
1116                .svhs           = 3,
1117                .gpiomask       = 0x03000F,
1118                .muxsel         = MUXSEL(2, 3, 1, 1),
1119                .gpiomux        = { 1, 0xd0001, 0, 0 },
1120                .gpiomute       = 10,
1121                                /* sound path (5 sources):
1122                                MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1123                                        0= ext. Audio IN
1124                                        1= from MUX2
1125                                        2= Mono TV sound from Tuner
1126                                        3= not connected
1127                                MUX2 (mask 0x30000):
1128                                        0,2,3= from MSP34xx
1129                                        1= FM stereo Radio from Tuner */
1130                .pll            = PLL_28,
1131                .tuner_type     = UNSET,
1132                .tuner_addr     = ADDR_UNSET,
1133        },
1134        [BTTV_BOARD_TVIEW_RDS_FM] = {
1135                /* Claas Langbehn <claas@bigfoot.com>,
1136                Sven Grothklags <sven@upb.de> */
1137                .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1138                .video_inputs   = 4,
1139                /* .audio_inputs= 3, */
1140                .svhs           = 2,
1141                .gpiomask       = 0x1c,
1142                .muxsel         = MUXSEL(2, 3, 1, 1),
1143                .gpiomux        = { 0, 0, 0x10, 8 },
1144                .gpiomute       = 4,
1145                .pll            = PLL_28,
1146                .tuner_type     = TUNER_PHILIPS_PAL,
1147                .tuner_addr     = ADDR_UNSET,
1148                .has_radio      = 1,
1149        },
1150        [BTTV_BOARD_LIFETEC_9415] = {
1151                /* Tim Röstermundt <rosterm@uni-muenster.de>
1152                in de.comp.os.unix.linux.hardware:
1153                        options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1154                        gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1155                        options tuner type=5 */
1156                .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1157                .video_inputs   = 4,
1158                /* .audio_inputs= 1, */
1159                .svhs           = 2,
1160                .gpiomask       = 0x18e0,
1161                .muxsel         = MUXSEL(2, 3, 1, 1),
1162                .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1163                .gpiomute       = 0x18e0,
1164                        /* For cards with tda9820/tda9821:
1165                                0x0000: Tuner normal stereo
1166                                0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1167                                0x0880: Tuner A2 stereo */
1168                .pll            = PLL_28,
1169                .tuner_type     = UNSET,
1170                .tuner_addr     = ADDR_UNSET,
1171        },
1172        [BTTV_BOARD_BESTBUY_EASYTV] = {
1173                /* Miguel Angel Alvarez <maacruz@navegalia.com>
1174                old Easy TV BT848 version (model CPH031) */
1175                .name           = "Askey CPH031/ BESTBUY Easy TV",
1176                .video_inputs   = 4,
1177                /* .audio_inputs= 1, */
1178                .svhs           = 2,
1179                .gpiomask       = 0xF,
1180                .muxsel         = MUXSEL(2, 3, 1, 0),
1181                .gpiomux        = { 2, 0, 0, 0 },
1182                .gpiomute       = 10,
1183                .pll            = PLL_28,
1184                .tuner_type     = TUNER_TEMIC_PAL,
1185                .tuner_addr     = ADDR_UNSET,
1186        },
1187
1188        /* ---- card 0x38 ---------------------------------- */
1189        [BTTV_BOARD_FLYVIDEO_98FM] = {
1190                /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1191                .name           = "Lifeview FlyVideo 98FM LR50",
1192                .video_inputs   = 4,
1193                /* .audio_inputs= 3, */
1194                .svhs           = 2,
1195                .gpiomask       = 0x1800,
1196                .muxsel         = MUXSEL(2, 3, 1, 1),
1197                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1198                .gpiomute       = 0x1800,
1199                .pll            = PLL_28,
1200                .tuner_type     = TUNER_PHILIPS_PAL,
1201                .tuner_addr     = ADDR_UNSET,
1202        },
1203                /* This is the ultimate cheapo capture card
1204                * just a BT848A on a small PCB!
1205                * Steve Hosgood <steve@equiinet.com> */
1206        [BTTV_BOARD_GRANDTEC] = {
1207                .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1208                .video_inputs   = 2,
1209                /* .audio_inputs= 0, */
1210                .svhs           = 1,
1211                .gpiomask       = 0,
1212                .muxsel         = MUXSEL(3, 1),
1213                .gpiomux        = { 0 },
1214                .no_msp34xx     = 1,
1215                .pll            = PLL_35,
1216                .tuner_type     = TUNER_ABSENT,
1217                .tuner_addr     = ADDR_UNSET,
1218        },
1219        [BTTV_BOARD_ASKEY_CPH060] = {
1220                /* Daniel Herrington <daniel.herrington@home.com> */
1221                .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1222                .video_inputs   = 3,
1223                /* .audio_inputs= 1, */
1224                .svhs           = 2,
1225                .gpiomask       = 0xe00,
1226                .muxsel         = MUXSEL(2, 3, 1, 1),
1227                .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1228                .gpiomute       = 0x800,
1229                .pll            = PLL_28,
1230                .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1231                .tuner_addr     = ADDR_UNSET,
1232        },
1233        [BTTV_BOARD_ASKEY_CPH03X] = {
1234                /* Matti Mottus <mottus@physic.ut.ee> */
1235                .name           = "Askey CPH03x TV Capturer",
1236                .video_inputs   = 4,
1237                /* .audio_inputs= 1, */
1238                .svhs           = 2,
1239                .gpiomask       = 0x03000F,
1240                .muxsel         = MUXSEL(2, 3, 1, 0),
1241                .gpiomux        = { 2, 0, 0, 0 },
1242                .gpiomute       = 1,
1243                .pll            = PLL_28,
1244                .tuner_type     = TUNER_TEMIC_PAL,
1245                .tuner_addr     = ADDR_UNSET,
1246                .has_remote     = 1,
1247        },
1248
1249        /* ---- card 0x3c ---------------------------------- */
1250        [BTTV_BOARD_MM100PCTV] = {
1251                /* Philip Blundell <philb@gnu.org> */
1252                .name           = "Modular Technology MM100PCTV",
1253                .video_inputs   = 2,
1254                /* .audio_inputs= 2, */
1255                .svhs           = NO_SVHS,
1256                .gpiomask       = 11,
1257                .muxsel         = MUXSEL(2, 3, 1, 1),
1258                .gpiomux        = { 2, 0, 0, 1 },
1259                .gpiomute       = 8,
1260                .pll            = PLL_35,
1261                .tuner_type     = TUNER_TEMIC_PAL,
1262                .tuner_addr     = ADDR_UNSET,
1263        },
1264        [BTTV_BOARD_GMV1] = {
1265                /* Adrian Cox <adrian@humboldt.co.uk */
1266                .name           = "AG Electronics GMV1",
1267                .video_inputs   = 2,
1268                /* .audio_inputs= 0, */
1269                .svhs           = 1,
1270                .gpiomask       = 0xF,
1271                .muxsel         = MUXSEL(2, 2),
1272                .gpiomux        = { },
1273                .no_msp34xx     = 1,
1274                .pll            = PLL_28,
1275                .tuner_type     = TUNER_ABSENT,
1276                .tuner_addr     = ADDR_UNSET,
1277        },
1278        [BTTV_BOARD_BESTBUY_EASYTV2] = {
1279                /* Miguel Angel Alvarez <maacruz@navegalia.com>
1280                new Easy TV BT878 version (model CPH061)
1281                special thanks to Informatica Mieres for providing the card */
1282                .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1283                .video_inputs   = 3,
1284                /* .audio_inputs= 2, */
1285                .svhs           = 2,
1286                .gpiomask       = 0xFF,
1287                .muxsel         = MUXSEL(2, 3, 1, 0),
1288                .gpiomux        = { 1, 0, 4, 4 },
1289                .gpiomute       = 9,
1290                .pll            = PLL_28,
1291                .tuner_type     = TUNER_PHILIPS_PAL,
1292                .tuner_addr     = ADDR_UNSET,
1293        },
1294        [BTTV_BOARD_ATI_TVWONDER] = {
1295                /* Lukas Gebauer <geby@volny.cz> */
1296                .name           = "ATI TV-Wonder",
1297                .video_inputs   = 3,
1298                /* .audio_inputs= 1, */
1299                .svhs           = 2,
1300                .gpiomask       = 0xf03f,
1301                .muxsel         = MUXSEL(2, 3, 1, 0),
1302                .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1303                .gpiomute       = 0xbffe,
1304                .pll            = PLL_28,
1305                .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1306                .tuner_addr     = ADDR_UNSET,
1307        },
1308
1309        /* ---- card 0x40 ---------------------------------- */
1310        [BTTV_BOARD_ATI_TVWONDERVE] = {
1311                /* Lukas Gebauer <geby@volny.cz> */
1312                .name           = "ATI TV-Wonder VE",
1313                .video_inputs   = 2,
1314                /* .audio_inputs= 1, */
1315                .svhs           = NO_SVHS,
1316                .gpiomask       = 1,
1317                .muxsel         = MUXSEL(2, 3, 0, 1),
1318                .gpiomux        = { 0, 0, 1, 0 },
1319                .no_msp34xx     = 1,
1320                .pll            = PLL_28,
1321                .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1322                .tuner_addr     = ADDR_UNSET,
1323        },
1324        [BTTV_BOARD_FLYVIDEO2000] = {
1325                /* DeeJay <deejay@westel900.net (2000S) */
1326                .name           = "Lifeview FlyVideo 2000S LR90",
1327                .video_inputs   = 3,
1328                /* .audio_inputs= 3, */
1329                .svhs           = 2,
1330                .gpiomask       = 0x18e0,
1331                .muxsel         = MUXSEL(2, 3, 0, 1),
1332                                /* Radio changed from 1e80 to 0x800 to make
1333                                FlyVideo2000S in .hu happy (gm)*/
1334                                /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1335                .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1336                .gpiomute       = 0x1800,
1337                .audio_mode_gpio= fv2000s_audio,
1338                .no_msp34xx     = 1,
1339                .pll            = PLL_28,
1340                .tuner_type     = TUNER_PHILIPS_PAL,
1341                .tuner_addr     = ADDR_UNSET,
1342        },
1343        [BTTV_BOARD_TERRATVALUER] = {
1344                .name           = "Terratec TValueRadio",
1345                .video_inputs   = 3,
1346                /* .audio_inputs= 1, */
1347                .svhs           = 2,
1348                .gpiomask       = 0xffff00,
1349                .muxsel         = MUXSEL(2, 3, 1, 1),
1350                .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1351                .gpiomute       = 0x900,
1352                .pll            = PLL_28,
1353                .tuner_type     = TUNER_PHILIPS_PAL,
1354                .tuner_addr     = ADDR_UNSET,
1355                .has_radio      = 1,
1356        },
1357        [BTTV_BOARD_GVBCTV4PCI] = {
1358                /* TANAKA Kei <peg00625@nifty.com> */
1359                .name           = "IODATA GV-BCTV4/PCI",
1360                .video_inputs   = 3,
1361                /* .audio_inputs= 1, */
1362                .svhs           = 2,
1363                .gpiomask       = 0x010f00,
1364                .muxsel         = MUXSEL(2, 3, 0, 0),
1365                .gpiomux        = {0x10000, 0, 0x10000, 0 },
1366                .no_msp34xx     = 1,
1367                .pll            = PLL_28,
1368                .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1369                .tuner_addr     = ADDR_UNSET,
1370                .audio_mode_gpio= gvbctv3pci_audio,
1371        },
1372
1373        /* ---- card 0x44 ---------------------------------- */
1374        [BTTV_BOARD_VOODOOTV_FM] = {
1375                .name           = "3Dfx VoodooTV FM (Euro)",
1376                /* try "insmod msp3400 simple=0" if you have
1377                * sound problems with this card. */
1378                .video_inputs   = 4,
1379                /* .audio_inputs= 1, */
1380                .svhs           = NO_SVHS,
1381                .gpiomask       = 0x4f8a00,
1382                /* 0x100000: 1=MSP enabled (0=disable again)
1383                * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1384                .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1385                .gpiomute       = 0x947fff,
1386                /* tvtuner, radio,   external,internal, mute,  stereo
1387                * tuner, Composit, SVid, Composit-on-Svid-adapter */
1388                .muxsel         = MUXSEL(2, 3, 0, 1),
1389                .tuner_type     = TUNER_MT2032,
1390                .tuner_addr     = ADDR_UNSET,
1391                .pll            = PLL_28,
1392                .has_radio      = 1,
1393        },
1394        [BTTV_BOARD_VOODOOTV_200] = {
1395                .name           = "VoodooTV 200 (USA)",
1396                /* try "insmod msp3400 simple=0" if you have
1397                * sound problems with this card. */
1398                .video_inputs   = 4,
1399                /* .audio_inputs= 1, */
1400                .svhs           = NO_SVHS,
1401                .gpiomask       = 0x4f8a00,
1402                /* 0x100000: 1=MSP enabled (0=disable again)
1403                * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1404                .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1405                .gpiomute       = 0x947fff,
1406                /* tvtuner, radio,   external,internal, mute,  stereo
1407                * tuner, Composit, SVid, Composit-on-Svid-adapter */
1408                .muxsel         = MUXSEL(2, 3, 0, 1),
1409                .tuner_type     = TUNER_MT2032,
1410                .tuner_addr     = ADDR_UNSET,
1411                .pll            = PLL_28,
1412                .has_radio      = 1,
1413        },
1414        [BTTV_BOARD_AIMMS] = {
1415                /* Philip Blundell <pb@nexus.co.uk> */
1416                .name           = "Active Imaging AIMMS",
1417                .video_inputs   = 1,
1418                /* .audio_inputs= 0, */
1419                .tuner_type     = TUNER_ABSENT,
1420                .tuner_addr     = ADDR_UNSET,
1421                .pll            = PLL_28,
1422                .muxsel         = MUXSEL(2),
1423                .gpiomask       = 0
1424        },
1425        [BTTV_BOARD_PV_BT878P_PLUS] = {
1426                /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1427                .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1428                .video_inputs   = 3,
1429                /* .audio_inputs= 4, */
1430                .svhs           = 2,
1431                .gpiomask       = 15,
1432                .muxsel         = MUXSEL(2, 3, 1, 1),
1433                .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1434                .gpiomute       = 13,
1435                .pll            = PLL_28,
1436                .tuner_type     = TUNER_LG_PAL_I_FM,
1437                .tuner_addr     = ADDR_UNSET,
1438                .has_remote     = 1,
1439                /* GPIO wiring:
1440                        GPIO0: U4.A0 (hef4052bt)
1441                        GPIO1: U4.A1
1442                        GPIO2: U4.A1 (second hef4052bt)
1443                        GPIO3: U4.nEN, U5.A0, A5.nEN
1444                        GPIO8-15: vrd866b ?
1445                */
1446        },
1447        [BTTV_BOARD_FLYVIDEO98EZ] = {
1448                .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1449                .video_inputs   = 4,
1450                /* .audio_inputs= 0, */
1451                .svhs           = 2,
1452                /* AV1, AV2, SVHS, CVid adapter on SVHS */
1453                .muxsel         = MUXSEL(2, 3, 1, 1),
1454                .pll            = PLL_28,
1455                .no_msp34xx     = 1,
1456                .tuner_type     = TUNER_ABSENT,
1457                .tuner_addr     = ADDR_UNSET,
1458        },
1459
1460        /* ---- card 0x48 ---------------------------------- */
1461        [BTTV_BOARD_PV_BT878P_9B] = {
1462                /* Dariusz Kowalewski <darekk@automex.pl> */
1463                .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1464                .video_inputs   = 4,
1465                /* .audio_inputs= 1, */
1466                .svhs           = 2,
1467                .gpiomask       = 0x3f,
1468                .muxsel         = MUXSEL(2, 3, 1, 1),
1469                .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1470                .gpiomute       = 0x09,
1471                .no_msp34xx     = 1,
1472                .pll            = PLL_28,
1473                .tuner_type     = TUNER_PHILIPS_PAL,
1474                .tuner_addr     = ADDR_UNSET,
1475                .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1476                .has_radio      = 1,  /* Note: not all cards have radio */
1477                .has_remote     = 1,
1478                /* GPIO wiring:
1479                        GPIO0: A0 hef4052
1480                        GPIO1: A1 hef4052
1481                        GPIO3: nEN hef4052
1482                        GPIO8-15: vrd866b
1483                        GPIO20,22,23: R30,R29,R28
1484                */
1485        },
1486        [BTTV_BOARD_SENSORAY311_611] = {
1487                /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1488                /* you must jumper JP5 for the 311 card (PC/104+) to work */
1489                .name           = "Sensoray 311/611",
1490                .video_inputs   = 5,
1491                /* .audio_inputs= 0, */
1492                .svhs           = 4,
1493                .gpiomask       = 0,
1494                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1495                .gpiomux        = { 0 },
1496                .tuner_type     = TUNER_ABSENT,
1497                .tuner_addr     = ADDR_UNSET,
1498        },
1499        [BTTV_BOARD_RV605] = {
1500                /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1501                .name           = "RemoteVision MX (RV605)",
1502                .video_inputs   = 16,
1503                /* .audio_inputs= 0, */
1504                .svhs           = NO_SVHS,
1505                .gpiomask       = 0x00,
1506                .gpiomask2      = 0x07ff,
1507                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1508                .no_msp34xx     = 1,
1509                .tuner_type     = TUNER_ABSENT,
1510                .tuner_addr     = ADDR_UNSET,
1511                .muxsel_hook    = rv605_muxsel,
1512        },
1513        [BTTV_BOARD_POWERCLR_MTV878] = {
1514                .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1515                .video_inputs   = 3,
1516                /* .audio_inputs= 2, */
1517                .svhs           = 2,
1518                .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1519                .muxsel         = MUXSEL(2, 1, 1),
1520                .gpiomux        = { 0, 1, 2, 2 },
1521                .gpiomute       = 4,
1522                .tuner_type     = TUNER_PHILIPS_PAL,
1523                .tuner_addr     = ADDR_UNSET,
1524                .pll            = PLL_28,
1525                .has_radio      = 1,
1526        },
1527
1528        /* ---- card 0x4c ---------------------------------- */
1529        [BTTV_BOARD_WINDVR] = {
1530                /* Masaki Suzuki <masaki@btree.org> */
1531                .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1532                .video_inputs   = 3,
1533                /* .audio_inputs= 1, */
1534                .svhs           = 2,
1535                .gpiomask       = 0x140007,
1536                .muxsel         = MUXSEL(2, 3, 1, 1),
1537                .gpiomux        = { 0, 1, 2, 3 },
1538                .gpiomute       = 4,
1539                .tuner_type     = TUNER_PHILIPS_NTSC,
1540                .tuner_addr     = ADDR_UNSET,
1541                .audio_mode_gpio= windvr_audio,
1542        },
1543        [BTTV_BOARD_GRANDTEC_MULTI] = {
1544                .name           = "GrandTec Multi Capture Card (Bt878)",
1545                .video_inputs   = 4,
1546                /* .audio_inputs= 0, */
1547                .svhs           = NO_SVHS,
1548                .gpiomask       = 0,
1549                .muxsel         = MUXSEL(2, 3, 1, 0),
1550                .gpiomux        = { 0 },
1551                .no_msp34xx     = 1,
1552                .pll            = PLL_28,
1553                .tuner_type     = TUNER_ABSENT,
1554                .tuner_addr     = ADDR_UNSET,
1555        },
1556        [BTTV_BOARD_KWORLD] = {
1557                .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1558                .video_inputs   = 4,
1559                /* .audio_inputs= 3, */
1560                .svhs           = 2,
1561                .gpiomask       = 7,
1562                /* Tuner, SVid, SVHS, SVid to SVHS connector */
1563                .muxsel         = MUXSEL(2, 3, 1, 1),
1564                .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1565                                                * This card lacks external Audio In, so we mute it on Ext. & Int.
1566                                                * The PCB can take a sbx1637/sbx1673, wiring unknown.
1567                                                * This card lacks PCI subsystem ID, sigh.
1568                                                * gpiomux =1: lower volume, 2+3: mute
1569                                                * btwincap uses 0x80000/0x80003
1570                                                */
1571                .gpiomute       = 4,
1572                .no_msp34xx     = 1,
1573                .pll            = PLL_28,
1574                .tuner_type     = TUNER_PHILIPS_PAL,
1575                .tuner_addr     = ADDR_UNSET,
1576                /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1577                radio signal strength indicators work fine. */
1578                .has_radio      = 1,
1579                /* GPIO Info:
1580                        GPIO0,1:   HEF4052 A0,A1
1581                        GPIO2:     HEF4052 nENABLE
1582                        GPIO3-7:   n.c.
1583                        GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1584                        GPIO14,15: ??
1585                        GPIO16-21: n.c.
1586                        GPIO22,23: ??
1587                        ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1588        },
1589        [BTTV_BOARD_DSP_TCVIDEO] = {
1590                /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1591                .name           = "DSP Design TCVIDEO",
1592                .video_inputs   = 4,
1593                .svhs           = NO_SVHS,
1594                .muxsel         = MUXSEL(2, 3, 1, 0),
1595                .pll            = PLL_28,
1596                .tuner_type     = UNSET,
1597                .tuner_addr     = ADDR_UNSET,
1598        },
1599
1600                /* ---- card 0x50 ---------------------------------- */
1601        [BTTV_BOARD_HAUPPAUGEPVR] = {
1602                .name           = "Hauppauge WinTV PVR",
1603                .video_inputs   = 4,
1604                /* .audio_inputs= 1, */
1605                .svhs           = 2,
1606                .muxsel         = MUXSEL(2, 0, 1, 1),
1607                .pll            = PLL_28,
1608                .tuner_type     = UNSET,
1609                .tuner_addr     = ADDR_UNSET,
1610
1611                .gpiomask       = 7,
1612                .gpiomux        = {7},
1613        },
1614        [BTTV_BOARD_GVBCTV5PCI] = {
1615                .name           = "IODATA GV-BCTV5/PCI",
1616                .video_inputs   = 3,
1617                /* .audio_inputs= 1, */
1618                .svhs           = 2,
1619                .gpiomask       = 0x0f0f80,
1620                .muxsel         = MUXSEL(2, 3, 1, 0),
1621                .gpiomux        = {0x030000, 0x010000, 0, 0 },
1622                .gpiomute       = 0x020000,
1623                .no_msp34xx     = 1,
1624                .pll            = PLL_28,
1625                .tuner_type     = TUNER_PHILIPS_NTSC_M,
1626                .tuner_addr     = ADDR_UNSET,
1627                .audio_mode_gpio= gvbctv5pci_audio,
1628                .has_radio      = 1,
1629        },
1630        [BTTV_BOARD_OSPREY1x0] = {
1631                .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1632                .video_inputs   = 4,                  /* id-inputs-clock */
1633                /* .audio_inputs= 0, */
1634                .svhs           = 3,
1635                .muxsel         = MUXSEL(3, 2, 0, 1),
1636                .pll            = PLL_28,
1637                .tuner_type     = TUNER_ABSENT,
1638                .tuner_addr     = ADDR_UNSET,
1639                .no_msp34xx     = 1,
1640                .no_tda7432     = 1,
1641        },
1642        [BTTV_BOARD_OSPREY1x0_848] = {
1643                .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1644                .video_inputs   = 3,
1645                /* .audio_inputs= 0, */
1646                .svhs           = 2,
1647                .muxsel         = MUXSEL(2, 3, 1),
1648                .pll            = PLL_28,
1649                .tuner_type     = TUNER_ABSENT,
1650                .tuner_addr     = ADDR_UNSET,
1651                .no_msp34xx     = 1,
1652                .no_tda7432     = 1,
1653        },
1654
1655                /* ---- card 0x54 ---------------------------------- */
1656        [BTTV_BOARD_OSPREY101_848] = {
1657                .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1658                .video_inputs   = 2,
1659                /* .audio_inputs= 0, */
1660                .svhs           = 1,
1661                .muxsel         = MUXSEL(3, 1),
1662                .pll            = PLL_28,
1663                .tuner_type     = TUNER_ABSENT,
1664                .tuner_addr     = ADDR_UNSET,
1665                .no_msp34xx     = 1,
1666                .no_tda7432     = 1,
1667        },
1668        [BTTV_BOARD_OSPREY1x1] = {
1669                .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1670                .video_inputs   = 1,
1671                /* .audio_inputs= 0, */
1672                .svhs           = NO_SVHS,
1673                .muxsel         = MUXSEL(0),
1674                .pll            = PLL_28,
1675                .tuner_type     = TUNER_ABSENT,
1676                .tuner_addr     = ADDR_UNSET,
1677                .no_msp34xx     = 1,
1678                .no_tda7432     = 1,
1679        },
1680        [BTTV_BOARD_OSPREY1x1_SVID] = {
1681                .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1682                .video_inputs   = 2,
1683                /* .audio_inputs= 0, */
1684                .svhs           = 1,
1685                .muxsel         = MUXSEL(0, 1),
1686                .pll            = PLL_28,
1687                .tuner_type     = TUNER_ABSENT,
1688                .tuner_addr     = ADDR_UNSET,
1689                .no_msp34xx     = 1,
1690                .no_tda7432     = 1,
1691        },
1692        [BTTV_BOARD_OSPREY2xx] = {
1693                .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1694                .video_inputs   = 1,
1695                /* .audio_inputs= 1, */
1696                .svhs           = NO_SVHS,
1697                .muxsel         = MUXSEL(0),
1698                .pll            = PLL_28,
1699                .tuner_type     = TUNER_ABSENT,
1700                .tuner_addr     = ADDR_UNSET,
1701                .no_msp34xx     = 1,
1702                .no_tda7432     = 1,
1703        },
1704
1705                /* ---- card 0x58 ---------------------------------- */
1706        [BTTV_BOARD_OSPREY2x0_SVID] = {
1707                .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1708                .video_inputs   = 2,
1709                /* .audio_inputs= 1, */
1710                .svhs           = 1,
1711                .muxsel         = MUXSEL(0, 1),
1712                .pll            = PLL_28,
1713                .tuner_type     = TUNER_ABSENT,
1714                .tuner_addr     = ADDR_UNSET,
1715                .no_msp34xx     = 1,
1716                .no_tda7432     = 1,
1717        },
1718        [BTTV_BOARD_OSPREY2x0] = {
1719                .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1720                .video_inputs   = 2,
1721                /* .audio_inputs= 1, */
1722                .svhs           = 1,
1723                .muxsel         = MUXSEL(2, 3),
1724                .pll            = PLL_28,
1725                .tuner_type     = TUNER_ABSENT,
1726                .tuner_addr     = ADDR_UNSET,
1727                .no_msp34xx     = 1,
1728                .no_tda7432     = 1,
1729        },
1730        [BTTV_BOARD_OSPREY500] = {
1731                .name           = "Osprey 500",   /* 500 */
1732                .video_inputs   = 2,
1733                /* .audio_inputs= 1, */
1734                .svhs           = 1,
1735                .muxsel         = MUXSEL(2, 3),
1736                .pll            = PLL_28,
1737                .tuner_type     = TUNER_ABSENT,
1738                .tuner_addr     = ADDR_UNSET,
1739                .no_msp34xx     = 1,
1740                .no_tda7432     = 1,
1741        },
1742        [BTTV_BOARD_OSPREY540] = {
1743                .name           = "Osprey 540",   /* 540 */
1744                .video_inputs   = 4,
1745                /* .audio_inputs= 1, */
1746                .pll            = PLL_28,
1747                .tuner_type     = TUNER_ABSENT,
1748                .tuner_addr     = ADDR_UNSET,
1749                .no_msp34xx     = 1,
1750                .no_tda7432     = 1,
1751        },
1752
1753                /* ---- card 0x5C ---------------------------------- */
1754        [BTTV_BOARD_OSPREY2000] = {
1755                .name           = "Osprey 2000",  /* 2000 */
1756                .video_inputs   = 2,
1757                /* .audio_inputs= 1, */
1758                .svhs           = 1,
1759                .muxsel         = MUXSEL(2, 3),
1760                .pll            = PLL_28,
1761                .tuner_type     = TUNER_ABSENT,
1762                .tuner_addr     = ADDR_UNSET,
1763                .no_msp34xx     = 1,
1764                .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1765        },
1766        [BTTV_BOARD_IDS_EAGLE] = {
1767                /* M G Berberich <berberic@forwiss.uni-passau.de> */
1768                .name           = "IDS Eagle",
1769                .video_inputs   = 4,
1770                /* .audio_inputs= 0, */
1771                .tuner_type     = TUNER_ABSENT,
1772                .tuner_addr     = ADDR_UNSET,
1773                .svhs           = NO_SVHS,
1774                .gpiomask       = 0,
1775                .muxsel         = MUXSEL(2, 2, 2, 2),
1776                .muxsel_hook    = eagle_muxsel,
1777                .no_msp34xx     = 1,
1778                .pll            = PLL_28,
1779        },
1780        [BTTV_BOARD_PINNACLESAT] = {
1781                .name           = "Pinnacle PCTV Sat",
1782                .video_inputs   = 2,
1783                /* .audio_inputs= 0, */
1784                .svhs           = 1,
1785                .tuner_type     = TUNER_ABSENT,
1786                .tuner_addr     = ADDR_UNSET,
1787                .no_msp34xx     = 1,
1788                .no_tda7432     = 1,
1789                .muxsel         = MUXSEL(3, 1),
1790                .pll            = PLL_28,
1791                .no_gpioirq     = 1,
1792                .has_dvb        = 1,
1793        },
1794        [BTTV_BOARD_FORMAC_PROTV] = {
1795                .name           = "Formac ProTV II (bt878)",
1796                .video_inputs   = 4,
1797                /* .audio_inputs= 1, */
1798                .svhs           = 3,
1799                .gpiomask       = 2,
1800                /* TV, Comp1, Composite over SVID con, SVID */
1801                .muxsel         = MUXSEL(2, 3, 1, 1),
1802                .gpiomux        = { 2, 2, 0, 0 },
1803                .pll            = PLL_28,
1804                .has_radio      = 1,
1805                .tuner_type     = TUNER_PHILIPS_PAL,
1806                .tuner_addr     = ADDR_UNSET,
1807        /* sound routing:
1808                GPIO=0x00,0x01,0x03: mute (?)
1809                0x02: both TV and radio (tuner: FM1216/I)
1810                The card has onboard audio connectors labeled "cdrom" and "board",
1811                not soldered here, though unknown wiring.
1812                Card lacks: external audio in, pci subsystem id.
1813        */
1814        },
1815
1816                /* ---- card 0x60 ---------------------------------- */
1817        [BTTV_BOARD_MACHTV] = {
1818                .name           = "MachTV",
1819                .video_inputs   = 3,
1820                /* .audio_inputs= 1, */
1821                .svhs           = NO_SVHS,
1822                .gpiomask       = 7,
1823                .muxsel         = MUXSEL(2, 3, 1, 1),
1824                .gpiomux        = { 0, 1, 2, 3},
1825                .gpiomute       = 4,
1826                .tuner_type     = TUNER_PHILIPS_PAL,
1827                .tuner_addr     = ADDR_UNSET,
1828                .pll            = PLL_28,
1829        },
1830        [BTTV_BOARD_EURESYS_PICOLO] = {
1831                .name           = "Euresys Picolo",
1832                .video_inputs   = 3,
1833                /* .audio_inputs= 0, */
1834                .svhs           = 2,
1835                .gpiomask       = 0,
1836                .no_msp34xx     = 1,
1837                .no_tda7432     = 1,
1838                .muxsel         = MUXSEL(2, 0, 1),
1839                .pll            = PLL_28,
1840                .tuner_type     = TUNER_ABSENT,
1841                .tuner_addr     = ADDR_UNSET,
1842        },
1843        [BTTV_BOARD_PV150] = {
1844                /* Luc Van Hoeylandt <luc@e-magic.be> */
1845                .name           = "ProVideo PV150", /* 0x4f */
1846                .video_inputs   = 2,
1847                /* .audio_inputs= 0, */
1848                .svhs           = NO_SVHS,
1849                .gpiomask       = 0,
1850                .muxsel         = MUXSEL(2, 3),
1851                .gpiomux        = { 0 },
1852                .no_msp34xx     = 1,
1853                .pll            = PLL_28,
1854                .tuner_type     = TUNER_ABSENT,
1855                .tuner_addr     = ADDR_UNSET,
1856        },
1857        [BTTV_BOARD_AD_TVK503] = {
1858                /* Hiroshi Takekawa <sian@big.or.jp> */
1859                /* This card lacks subsystem ID */
1860                .name           = "AD-TVK503", /* 0x63 */
1861                .video_inputs   = 4,
1862                /* .audio_inputs= 1, */
1863                .svhs           = 2,
1864                .gpiomask       = 0x001e8007,
1865                .muxsel         = MUXSEL(2, 3, 1, 0),
1866                /*                  Tuner, Radio, external, internal, off,  on */
1867                .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1868                .gpiomute       = 0x0f,
1869                .no_msp34xx     = 1,
1870                .pll            = PLL_28,
1871                .tuner_type     = TUNER_PHILIPS_NTSC,
1872                .tuner_addr     = ADDR_UNSET,
1873                .audio_mode_gpio= adtvk503_audio,
1874        },
1875
1876                /* ---- card 0x64 ---------------------------------- */
1877        [BTTV_BOARD_HERCULES_SM_TV] = {
1878                .name           = "Hercules Smart TV Stereo",
1879                .video_inputs   = 4,
1880                /* .audio_inputs= 1, */
1881                .svhs           = 2,
1882                .gpiomask       = 0x00,
1883                .muxsel         = MUXSEL(2, 3, 1, 1),
1884                .no_msp34xx     = 1,
1885                .pll            = PLL_28,
1886                .tuner_type     = TUNER_PHILIPS_PAL,
1887                .tuner_addr     = ADDR_UNSET,
1888                /* Notes:
1889                - card lacks subsystem ID
1890                - stereo variant w/ daughter board with tda9874a @0xb0
1891                - Audio Routing:
1892                        always from tda9874 independent of GPIO (?)
1893                        external line in: unknown
1894                - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1895                        hef4053 (instead 4052) for unknown function
1896                */
1897        },
1898        [BTTV_BOARD_PACETV] = {
1899                .name           = "Pace TV & Radio Card",
1900                .video_inputs   = 4,
1901                /* .audio_inputs= 1, */
1902                .svhs           = 2,
1903                /* Tuner, CVid, SVid, CVid over SVid connector */
1904                .muxsel         = MUXSEL(2, 3, 1, 1),
1905                .gpiomask       = 0,
1906                .no_tda7432     = 1,
1907                .tuner_type     = TUNER_PHILIPS_PAL_I,
1908                .tuner_addr     = ADDR_UNSET,
1909                .has_radio      = 1,
1910                .pll            = PLL_28,
1911                /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1912                only internal line out: (4pin header) RGGL
1913                Radio must be decoded by msp3410d (not routed through)*/
1914                /*
1915                .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1916                */
1917        },
1918        [BTTV_BOARD_IVC200] = {
1919                /* Chris Willing <chris@vislab.usyd.edu.au> */
1920                .name           = "IVC-200",
1921                .video_inputs   = 1,
1922                /* .audio_inputs= 0, */
1923                .tuner_type     = TUNER_ABSENT,
1924                .tuner_addr     = ADDR_UNSET,
1925                .svhs           = NO_SVHS,
1926                .gpiomask       = 0xdf,
1927                .muxsel         = MUXSEL(2),
1928                .pll            = PLL_28,
1929        },
1930        [BTTV_BOARD_IVCE8784] = {
1931                .name           = "IVCE-8784",
1932                .video_inputs   = 1,
1933                /* .audio_inputs= 0, */
1934                .tuner_type     = TUNER_ABSENT,
1935                .tuner_addr     = ADDR_UNSET,
1936                .svhs           = NO_SVHS,
1937                .gpiomask       = 0xdf,
1938                .muxsel         = MUXSEL(2),
1939                .pll            = PLL_28,
1940        },
1941        [BTTV_BOARD_XGUARD] = {
1942                .name           = "Grand X-Guard / Trust 814PCI",
1943                .video_inputs   = 16,
1944                /* .audio_inputs= 0, */
1945                .svhs           = NO_SVHS,
1946                .tuner_type     = TUNER_ABSENT,
1947                .tuner_addr     = ADDR_UNSET,
1948                .gpiomask2      = 0xff,
1949                .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1950                .muxsel_hook    = xguard_muxsel,
1951                .no_msp34xx     = 1,
1952                .no_tda7432     = 1,
1953                .pll            = PLL_28,
1954        },
1955
1956                /* ---- card 0x68 ---------------------------------- */
1957        [BTTV_BOARD_NEBULA_DIGITV] = {
1958                .name           = "Nebula Electronics DigiTV",
1959                .video_inputs   = 1,
1960                .svhs           = NO_SVHS,
1961                .muxsel         = MUXSEL(2, 3, 1, 0),
1962                .no_msp34xx     = 1,
1963                .no_tda7432     = 1,
1964                .pll            = PLL_28,
1965                .tuner_type     = TUNER_ABSENT,
1966                .tuner_addr     = ADDR_UNSET,
1967                .has_dvb        = 1,
1968                .has_remote     = 1,
1969                .gpiomask       = 0x1b,
1970                .no_gpioirq     = 1,
1971        },
1972        [BTTV_BOARD_PV143] = {
1973                /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1974                .name           = "ProVideo PV143",
1975                .video_inputs   = 4,
1976                /* .audio_inputs= 0, */
1977                .svhs           = NO_SVHS,
1978                .gpiomask       = 0,
1979                .muxsel         = MUXSEL(2, 3, 1, 0),
1980                .gpiomux        = { 0 },
1981                .no_msp34xx     = 1,
1982                .pll            = PLL_28,
1983                .tuner_type     = TUNER_ABSENT,
1984                .tuner_addr     = ADDR_UNSET,
1985        },
1986        [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1987                /* M.Klahr@phytec.de */
1988                .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1989                .video_inputs   = 4,
1990                /* .audio_inputs= 0, */
1991                .svhs           = 3,
1992                .gpiomask       = 0x00,
1993                .muxsel         = MUXSEL(2, 3, 1, 0),
1994                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1995                .pll            = PLL_28,
1996                .tuner_type     = TUNER_ABSENT,
1997                .tuner_addr     = ADDR_UNSET,
1998        },
1999        [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2000                .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2001                .video_inputs   = 4,
2002                /* .audio_inputs= 0, */
2003                .svhs           = 3,
2004                .gpiomask       = 0x00,
2005                .muxsel         = MUXSEL(2, 3, 1, 1),
2006                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2007                .pll            = PLL_28,
2008                .tuner_type     = TUNER_ABSENT,
2009                .tuner_addr     = ADDR_UNSET,
2010        },
2011
2012                /* ---- card 0x6c ---------------------------------- */
2013        [BTTV_BOARD_VD009_MINIDIN] = {
2014                .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2015                .video_inputs   = 10,
2016                /* .audio_inputs= 0, */
2017                .svhs           = 9,
2018                .gpiomask       = 0x00,
2019                .gpiomask2      = 0x03, /* used for external vodeo mux */
2020                .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2021                .muxsel_hook    = phytec_muxsel,
2022                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2023                .pll            = PLL_28,
2024                .tuner_type     = TUNER_ABSENT,
2025                .tuner_addr     = ADDR_UNSET,
2026        },
2027        [BTTV_BOARD_VD009_COMBI] = {
2028                .name           = "PHYTEC VD-009 Combi (bt878)",
2029                .video_inputs   = 10,
2030                /* .audio_inputs= 0, */
2031                .svhs           = 9,
2032                .gpiomask       = 0x00,
2033                .gpiomask2      = 0x03, /* used for external vodeo mux */
2034                .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2035                .muxsel_hook    = phytec_muxsel,
2036                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2037                .pll            = PLL_28,
2038                .tuner_type     = TUNER_ABSENT,
2039                .tuner_addr     = ADDR_UNSET,
2040        },
2041        [BTTV_BOARD_IVC100] = {
2042                .name           = "IVC-100",
2043                .video_inputs   = 4,
2044                /* .audio_inputs= 0, */
2045                .tuner_type     = TUNER_ABSENT,
2046                .tuner_addr     = ADDR_UNSET,
2047                .svhs           = NO_SVHS,
2048                .gpiomask       = 0xdf,
2049                .muxsel         = MUXSEL(2, 3, 1, 0),
2050                .pll            = PLL_28,
2051        },
2052        [BTTV_BOARD_IVC120] = {
2053                /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2054                .name           = "IVC-120G",
2055                .video_inputs   = 16,
2056                /* .audio_inputs= 0, */
2057                .tuner_type     = TUNER_ABSENT,
2058                .tuner_addr     = ADDR_UNSET,
2059                .svhs           = NO_SVHS,   /* card has no svhs */
2060                .no_msp34xx     = 1,
2061                .no_tda7432     = 1,
2062                .gpiomask       = 0x00,
2063                .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2064                .muxsel_hook    = ivc120_muxsel,
2065                .pll            = PLL_28,
2066        },
2067
2068                /* ---- card 0x70 ---------------------------------- */
2069        [BTTV_BOARD_PC_HDTV] = {
2070                .name           = "pcHDTV HD-2000 TV",
2071                .video_inputs   = 4,
2072                /* .audio_inputs= 1, */
2073                .svhs           = 2,
2074                .muxsel         = MUXSEL(2, 3, 1, 0),
2075                .tuner_type     = TUNER_PHILIPS_FCV1236D,
2076                .tuner_addr     = ADDR_UNSET,
2077                .has_dvb        = 1,
2078        },
2079        [BTTV_BOARD_TWINHAN_DST] = {
2080                .name           = "Twinhan DST + clones",
2081                .no_msp34xx     = 1,
2082                .no_tda7432     = 1,
2083                .tuner_type     = TUNER_ABSENT,
2084                .tuner_addr     = ADDR_UNSET,
2085                .no_video       = 1,
2086                .has_dvb        = 1,
2087        },
2088        [BTTV_BOARD_WINFASTVC100] = {
2089                .name           = "Winfast VC100",
2090                .video_inputs   = 3,
2091                /* .audio_inputs= 0, */
2092                .svhs           = 1,
2093                /* Vid In, SVid In, Vid over SVid in connector */
2094                .muxsel         = MUXSEL(3, 1, 1, 3),
2095                .no_msp34xx     = 1,
2096                .no_tda7432     = 1,
2097                .tuner_type     = TUNER_ABSENT,
2098                .tuner_addr     = ADDR_UNSET,
2099                .pll            = PLL_28,
2100        },
2101        [BTTV_BOARD_TEV560] = {
2102                .name           = "Teppro TEV-560/InterVision IV-560",
2103                .video_inputs   = 3,
2104                /* .audio_inputs= 1, */
2105                .svhs           = 2,
2106                .gpiomask       = 3,
2107                .muxsel         = MUXSEL(2, 3, 1, 1),
2108                .gpiomux        = { 1, 1, 1, 1 },
2109                .tuner_type     = TUNER_PHILIPS_PAL,
2110                .tuner_addr     = ADDR_UNSET,
2111                .pll            = PLL_35,
2112        },
2113
2114                /* ---- card 0x74 ---------------------------------- */
2115        [BTTV_BOARD_SIMUS_GVC1100] = {
2116                .name           = "SIMUS GVC1100",
2117                .video_inputs   = 4,
2118                /* .audio_inputs= 0, */
2119                .svhs           = NO_SVHS,
2120                .tuner_type     = TUNER_ABSENT,
2121                .tuner_addr     = ADDR_UNSET,
2122                .pll            = PLL_28,
2123                .muxsel         = MUXSEL(2, 2, 2, 2),
2124                .gpiomask       = 0x3F,
2125                .muxsel_hook    = gvc1100_muxsel,
2126        },
2127        [BTTV_BOARD_NGSTV_PLUS] = {
2128                /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2129                .name           = "NGS NGSTV+",
2130                .video_inputs   = 3,
2131                .svhs           = 2,
2132                .gpiomask       = 0x008007,
2133                .muxsel         = MUXSEL(2, 3, 0, 0),
2134                .gpiomux        = { 0, 0, 0, 0 },
2135                .gpiomute       = 0x000003,
2136                .pll            = PLL_28,
2137                .tuner_type     = TUNER_PHILIPS_PAL,
2138                .tuner_addr     = ADDR_UNSET,
2139                .has_remote     = 1,
2140        },
2141        [BTTV_BOARD_LMLBT4] = {
2142                /* http://linuxmedialabs.com */
2143                .name           = "LMLBT4",
2144                .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2145                /* .audio_inputs= 0, */
2146                .svhs           = NO_SVHS,
2147                .muxsel         = MUXSEL(2, 3, 1, 0),
2148                .no_msp34xx     = 1,
2149                .no_tda7432     = 1,
2150                .tuner_type     = TUNER_ABSENT,
2151                .tuner_addr     = ADDR_UNSET,
2152        },
2153        [BTTV_BOARD_TEKRAM_M205] = {
2154                /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2155                .name           = "Tekram M205 PRO",
2156                .video_inputs   = 3,
2157                /* .audio_inputs= 1, */
2158                .tuner_type     = TUNER_PHILIPS_PAL,
2159                .tuner_addr     = ADDR_UNSET,
2160                .svhs           = 2,
2161                .gpiomask       = 0x68,
2162                .muxsel         = MUXSEL(2, 3, 1),
2163                .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2164                .pll            = PLL_28,
2165        },
2166
2167                /* ---- card 0x78 ---------------------------------- */
2168        [BTTV_BOARD_CONTVFMI] = {
2169                /* Javier Cendan Ares <jcendan@lycos.es> */
2170                /* bt878 TV + FM without subsystem ID */
2171                .name           = "Conceptronic CONTVFMi",
2172                .video_inputs   = 3,
2173                /* .audio_inputs= 1, */
2174                .svhs           = 2,
2175                .gpiomask       = 0x008007,
2176                .muxsel         = MUXSEL(2, 3, 1, 1),
2177                .gpiomux        = { 0, 1, 2, 2 },
2178                .gpiomute       = 3,
2179                .pll            = PLL_28,
2180                .tuner_type     = TUNER_PHILIPS_PAL,
2181                .tuner_addr     = ADDR_UNSET,
2182                .has_remote     = 1,
2183                .has_radio      = 1,
2184        },
2185        [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2186                /*Eric DEBIEF <debief@telemsa.com>*/
2187                /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2188                /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2189                /*0x79 in bttv.h*/
2190                .name           = "Euresys Picolo Tetra",
2191                .video_inputs   = 4,
2192                /* .audio_inputs= 0, */
2193                .svhs           = NO_SVHS,
2194                .gpiomask       = 0,
2195                .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2196                .no_msp34xx     = 1,
2197                .no_tda7432     = 1,
2198                /*878A input is always MUX0, see above.*/
2199                .muxsel         = MUXSEL(2, 2, 2, 2),
2200                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2201                .pll            = PLL_28,
2202                .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2203                .tuner_type     = TUNER_ABSENT,
2204                .tuner_addr     = ADDR_UNSET,
2205        },
2206        [BTTV_BOARD_SPIRIT_TV] = {
2207                /* Spirit TV Tuner from http://spiritmodems.com.au */
2208                /* Stafford Goodsell <surge@goliath.homeunix.org> */
2209                .name           = "Spirit TV Tuner",
2210                .video_inputs   = 3,
2211                /* .audio_inputs= 1, */
2212                .svhs           = 2,
2213                .gpiomask       = 0x0000000f,
2214                .muxsel         = MUXSEL(2, 1, 1),
2215                .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2216                .tuner_type     = TUNER_TEMIC_PAL,
2217                .tuner_addr     = ADDR_UNSET,
2218                .no_msp34xx     = 1,
2219        },
2220        [BTTV_BOARD_AVDVBT_771] = {
2221                /* Wolfram Joost <wojo@frokaschwei.de> */
2222                .name           = "AVerMedia AVerTV DVB-T 771",
2223                .video_inputs   = 2,
2224                .svhs           = 1,
2225                .tuner_type     = TUNER_ABSENT,
2226                .tuner_addr     = ADDR_UNSET,
2227                .muxsel         = MUXSEL(3, 3),
2228                .no_msp34xx     = 1,
2229                .no_tda7432     = 1,
2230                .pll            = PLL_28,
2231                .has_dvb        = 1,
2232                .no_gpioirq     = 1,
2233                .has_remote     = 1,
2234        },
2235                /* ---- card 0x7c ---------------------------------- */
2236        [BTTV_BOARD_AVDVBT_761] = {
2237                /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2238                /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2239                .name           = "AverMedia AverTV DVB-T 761",
2240                .video_inputs   = 2,
2241                .svhs           = 1,
2242                .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2243                .no_msp34xx     = 1,
2244                .no_tda7432     = 1,
2245                .pll            = PLL_28,
2246                .tuner_type     = TUNER_ABSENT,
2247                .tuner_addr     = ADDR_UNSET,
2248                .has_dvb        = 1,
2249                .no_gpioirq     = 1,
2250                .has_remote     = 1,
2251        },
2252        [BTTV_BOARD_MATRIX_VISIONSQ] = {
2253                /* andre.schwarz@matrix-vision.de */
2254                .name           = "MATRIX Vision Sigma-SQ",
2255                .video_inputs   = 16,
2256                /* .audio_inputs= 0, */
2257                .svhs           = NO_SVHS,
2258                .gpiomask       = 0x0,
2259                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2260                .muxsel_hook    = sigmaSQ_muxsel,
2261                .gpiomux        = { 0 },
2262                .no_msp34xx     = 1,
2263                .pll            = PLL_28,
2264                .tuner_type     = TUNER_ABSENT,
2265                .tuner_addr     = ADDR_UNSET,
2266        },
2267        [BTTV_BOARD_MATRIX_VISIONSLC] = {
2268                /* andre.schwarz@matrix-vision.de */
2269                .name           = "MATRIX Vision Sigma-SLC",
2270                .video_inputs   = 4,
2271                /* .audio_inputs= 0, */
2272                .svhs           = NO_SVHS,
2273                .gpiomask       = 0x0,
2274                .muxsel         = MUXSEL(2, 2, 2, 2),
2275                .muxsel_hook    = sigmaSLC_muxsel,
2276                .gpiomux        = { 0 },
2277                .no_msp34xx     = 1,
2278                .pll            = PLL_28,
2279                .tuner_type     = TUNER_ABSENT,
2280                .tuner_addr     = ADDR_UNSET,
2281        },
2282                /* BTTV_BOARD_APAC_VIEWCOMP */
2283        [BTTV_BOARD_APAC_VIEWCOMP] = {
2284                /* Attila Kondoros <attila.kondoros@chello.hu> */
2285                /* bt878 TV + FM 0x00000000 subsystem ID */
2286                .name           = "APAC Viewcomp 878(AMAX)",
2287                .video_inputs   = 2,
2288                /* .audio_inputs= 1, */
2289                .svhs           = NO_SVHS,
2290                .gpiomask       = 0xFF,
2291                .muxsel         = MUXSEL(2, 3, 1, 1),
2292                .gpiomux        = { 2, 0, 0, 0 },
2293                .gpiomute       = 10,
2294                .pll            = PLL_28,
2295                .tuner_type     = TUNER_PHILIPS_PAL,
2296                .tuner_addr     = ADDR_UNSET,
2297                .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2298                .has_radio      = 1,   /* not every card has radio */
2299        },
2300
2301                /* ---- card 0x80 ---------------------------------- */
2302        [BTTV_BOARD_DVICO_DVBT_LITE] = {
2303                /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2304                .name           = "DViCO FusionHDTV DVB-T Lite",
2305                .no_msp34xx     = 1,
2306                .no_tda7432     = 1,
2307                .pll            = PLL_28,
2308                .no_video       = 1,
2309                .has_dvb        = 1,
2310                .tuner_type     = TUNER_ABSENT,
2311                .tuner_addr     = ADDR_UNSET,
2312        },
2313        [BTTV_BOARD_VGEAR_MYVCD] = {
2314                /* Steven <photon38@pchome.com.tw> */
2315                .name           = "V-Gear MyVCD",
2316                .video_inputs   = 3,
2317                /* .audio_inputs= 1, */
2318                .svhs           = 2,
2319                .gpiomask       = 0x3f,
2320                .muxsel         = MUXSEL(2, 3, 1, 0),
2321                .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2322                .gpiomute       = 0x31,
2323                .no_msp34xx     = 1,
2324                .pll            = PLL_28,
2325                .tuner_type     = TUNER_PHILIPS_NTSC_M,
2326                .tuner_addr     = ADDR_UNSET,
2327                .has_radio      = 0,
2328        },
2329        [BTTV_BOARD_SUPER_TV] = {
2330                /* Rick C <cryptdragoon@gmail.com> */
2331                .name           = "Super TV Tuner",
2332                .video_inputs   = 4,
2333                /* .audio_inputs= 1, */
2334                .svhs           = 2,
2335                .muxsel         = MUXSEL(2, 3, 1, 0),
2336                .tuner_type     = TUNER_PHILIPS_NTSC,
2337                .tuner_addr     = ADDR_UNSET,
2338                .gpiomask       = 0x008007,
2339                .gpiomux        = { 0, 0x000001,0,0 },
2340                .has_radio      = 1,
2341        },
2342        [BTTV_BOARD_TIBET_CS16] = {
2343                /* Chris Fanning <video4linux@haydon.net> */
2344                .name           = "Tibet Systems 'Progress DVR' CS16",
2345                .video_inputs   = 16,
2346                /* .audio_inputs= 0, */
2347                .svhs           = NO_SVHS,
2348                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2349                .pll            = PLL_28,
2350                .no_msp34xx     = 1,
2351                .no_tda7432     = 1,
2352                .tuner_type     = TUNER_ABSENT,
2353                .tuner_addr     = ADDR_UNSET,
2354                .muxsel_hook    = tibetCS16_muxsel,
2355        },
2356        [BTTV_BOARD_KODICOM_4400R] = {
2357                /* Bill Brack <wbrack@mmm.com.hk> */
2358                /*
2359                * Note that, because of the card's wiring, the "master"
2360                * BT878A chip (i.e. the one which controls the analog switch
2361                * and must use this card type) is the 2nd one detected.  The
2362                * other 3 chips should use card type 0x85, whose description
2363                * follows this one.  There is a EEPROM on the card (which is
2364                * connected to the I2C of one of those other chips), but is
2365                * not currently handled.  There is also a facility for a
2366                * "monitor", which is also not currently implemented.
2367                */
2368                .name           = "Kodicom 4400R (master)",
2369                .video_inputs   = 16,
2370                /* .audio_inputs= 0, */
2371                .tuner_type     = TUNER_ABSENT,
2372                .tuner_addr     = ADDR_UNSET,
2373                .svhs           = NO_SVHS,
2374                /* GPIO bits 0-9 used for analog switch:
2375                *   00 - 03:    camera selector
2376                *   04 - 06:    channel (controller) selector
2377                *   07: data (1->on, 0->off)
2378                *   08: strobe
2379                *   09: reset
2380                * bit 16 is input from sync separator for the channel
2381                */
2382                .gpiomask       = 0x0003ff,
2383                .no_gpioirq     = 1,
2384                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2385                .pll            = PLL_28,
2386                .no_msp34xx     = 1,
2387                .no_tda7432     = 1,
2388                .muxsel_hook    = kodicom4400r_muxsel,
2389        },
2390        [BTTV_BOARD_KODICOM_4400R_SL] = {
2391                /* Bill Brack <wbrack@mmm.com.hk> */
2392                /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2393                * one which controls the analog switch, and must use the card type)
2394                * is the 2nd one detected.  The other 3 chips should use this card
2395                * type
2396                */
2397                .name           = "Kodicom 4400R (slave)",
2398                .video_inputs   = 16,
2399                /* .audio_inputs= 0, */
2400                .tuner_type     = TUNER_ABSENT,
2401                .tuner_addr     = ADDR_UNSET,
2402                .svhs           = NO_SVHS,
2403                .gpiomask       = 0x010000,
2404                .no_gpioirq     = 1,
2405                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2406                .pll            = PLL_28,
2407                .no_msp34xx     = 1,
2408                .no_tda7432     = 1,
2409                .muxsel_hook    = kodicom4400r_muxsel,
2410        },
2411                /* ---- card 0x86---------------------------------- */
2412        [BTTV_BOARD_ADLINK_RTV24] = {
2413                /* Michael Henson <mhenson@clarityvi.com> */
2414                /* Adlink RTV24 with special unlock codes */
2415                .name           = "Adlink RTV24",
2416                .video_inputs   = 4,
2417                /* .audio_inputs= 1, */
2418                .svhs           = 2,
2419                .muxsel         = MUXSEL(2, 3, 1, 0),
2420                .tuner_type     = UNSET,
2421                .tuner_addr     = ADDR_UNSET,
2422                .pll            = PLL_28,
2423        },
2424                /* ---- card 0x87---------------------------------- */
2425        [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2426                /* Michael Krufky <mkrufky@linuxtv.org> */
2427                .name           = "DViCO FusionHDTV 5 Lite",
2428                .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2429                .tuner_addr     = ADDR_UNSET,
2430                .video_inputs   = 3,
2431                /* .audio_inputs= 1, */
2432                .svhs           = 2,
2433                .muxsel         = MUXSEL(2, 3, 1),
2434                .gpiomask       = 0x00e00007,
2435                .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2436                .gpiomute       = 0x00c00007,
2437                .no_msp34xx     = 1,
2438                .no_tda7432     = 1,
2439                .has_dvb        = 1,
2440        },
2441                /* ---- card 0x88---------------------------------- */
2442        [BTTV_BOARD_ACORP_Y878F] = {
2443                /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2444                .name           = "Acorp Y878F",
2445                .video_inputs   = 3,
2446                /* .audio_inputs= 1, */
2447                .svhs           = 2,
2448                .gpiomask       = 0x01fe00,
2449                .muxsel         = MUXSEL(2, 3, 1, 1),
2450                .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2451                .gpiomute       = 0x002000,
2452                .pll            = PLL_28,
2453                .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2454                .tuner_addr     = 0xc1 >>1,
2455                .has_radio      = 1,
2456        },
2457                /* ---- card 0x89 ---------------------------------- */
2458        [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2459                .name           = "Conceptronic CTVFMi v2",
2460                .video_inputs   = 3,
2461                /* .audio_inputs= 1, */
2462                .svhs           = 2,
2463                .gpiomask       = 0x001c0007,
2464                .muxsel         = MUXSEL(2, 3, 1, 1),
2465                .gpiomux        = { 0, 1, 2, 2 },
2466                .gpiomute       = 3,
2467                .pll            = PLL_28,
2468                .tuner_type     = TUNER_TENA_9533_DI,
2469                .tuner_addr     = ADDR_UNSET,
2470                .has_remote     = 1,
2471                .has_radio      = 1,
2472        },
2473                /* ---- card 0x8a ---------------------------------- */
2474        [BTTV_BOARD_PV_BT878P_2E] = {
2475                .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2476                .video_inputs   = 5,
2477                /* .audio_inputs= 1, */
2478                .svhs           = 3,
2479                .has_dig_in     = 1,
2480                .gpiomask       = 0x01fe00,
2481                .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2482                /* .digital_mode= DIGITAL_MODE_CAMERA, */
2483                .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2484                .gpiomute       = 0x12400,
2485                .no_msp34xx     = 1,
2486                .pll            = PLL_28,
2487                .tuner_type     = TUNER_LG_PAL_FM,
2488                .tuner_addr     = ADDR_UNSET,
2489                .has_remote     = 1,
2490        },
2491                /* ---- card 0x8b ---------------------------------- */
2492        [BTTV_BOARD_PV_M4900] = {
2493                /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2494                .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2495                .video_inputs   = 3,
2496                /* .audio_inputs= 1, */
2497                .svhs           = 2,
2498                .gpiomask       = 0x3f,
2499                .muxsel         = MUXSEL(2, 3, 1, 1),
2500                .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2501                .gpiomute       = 0x29,
2502                .no_msp34xx     = 1,
2503                .pll            = PLL_28,
2504                .tuner_type     = TUNER_YMEC_TVF_5533MF,
2505                .tuner_addr     = ADDR_UNSET,
2506                .has_radio      = 1,
2507                .has_remote     = 1,
2508        },
2509                /* ---- card 0x8c ---------------------------------- */
2510        /* Has four Bt878 chips behind a PCI bridge, each chip has:
2511             one external BNC composite input (mux 2)
2512             three internal composite inputs (unknown muxes)
2513             an 18-bit stereo A/D (CS5331A), which has:
2514               one external stereo unblanced (RCA) audio connection
2515               one (or 3?) internal stereo balanced (XLR) audio connection
2516               input is selected via gpio to a 14052B mux
2517                 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2518               gain is controlled via an X9221A chip on the I2C bus @0x28
2519               sample rate is controlled via gpio to an MK1413S
2520                 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2521             There is neither a tuner nor an svideo input. */
2522        [BTTV_BOARD_OSPREY440]  = {
2523                .name           = "Osprey 440",
2524                .video_inputs   = 4,
2525                /* .audio_inputs= 2, */
2526                .svhs           = NO_SVHS,
2527                .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2528                .gpiomask       = 0x303,
2529                .gpiomute       = 0x000, /* int + 32kHz */
2530                .gpiomux        = { 0, 0, 0x000, 0x100},
2531                .pll            = PLL_28,
2532                .tuner_type     = TUNER_ABSENT,
2533                .tuner_addr     = ADDR_UNSET,
2534                .no_msp34xx     = 1,
2535                .no_tda7432     = 1,
2536        },
2537                /* ---- card 0x8d ---------------------------------- */
2538        [BTTV_BOARD_ASOUND_SKYEYE] = {
2539                .name           = "Asound Skyeye PCTV",
2540                .video_inputs   = 3,
2541                /* .audio_inputs= 1, */
2542                .svhs           = 2,
2543                .gpiomask       = 15,
2544                .muxsel         = MUXSEL(2, 3, 1, 1),
2545                .gpiomux        = { 2, 0, 0, 0 },
2546                .gpiomute       = 1,
2547                .pll            = PLL_28,
2548                .tuner_type     = TUNER_PHILIPS_NTSC,
2549                .tuner_addr     = ADDR_UNSET,
2550        },
2551                /* ---- card 0x8e ---------------------------------- */
2552        [BTTV_BOARD_SABRENT_TVFM] = {
2553                .name           = "Sabrent TV-FM (bttv version)",
2554                .video_inputs   = 3,
2555                /* .audio_inputs= 1, */
2556                .svhs           = 2,
2557                .gpiomask       = 0x108007,
2558                .muxsel         = MUXSEL(2, 3, 1, 1),
2559                .gpiomux        = { 100000, 100002, 100002, 100000 },
2560                .no_msp34xx     = 1,
2561                .no_tda7432     = 1,
2562                .pll            = PLL_28,
2563                .tuner_type     = TUNER_TNF_5335MF,
2564                .tuner_addr     = ADDR_UNSET,
2565                .has_radio      = 1,
2566        },
2567        /* ---- card 0x8f ---------------------------------- */
2568        [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2569                .name           = "Hauppauge ImpactVCB (bt878)",
2570                .video_inputs   = 4,
2571                /* .audio_inputs= 0, */
2572                .svhs           = NO_SVHS,
2573                .gpiomask       = 0x0f, /* old: 7 */
2574                .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2575                .no_msp34xx     = 1,
2576                .no_tda7432     = 1,
2577                .tuner_type     = TUNER_ABSENT,
2578                .tuner_addr     = ADDR_UNSET,
2579        },
2580        [BTTV_BOARD_MACHTV_MAGICTV] = {
2581                /* Julian Calaby <julian.calaby@gmail.com>
2582                 * Slightly different from original MachTV definition (0x60)
2583
2584                 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2585                 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2586                 * properly (methinks) causing no keyup bits being set */
2587
2588                .name           = "MagicTV", /* rebranded MachTV */
2589                .video_inputs   = 3,
2590                /* .audio_inputs= 1, */
2591                .svhs           = 2,
2592                .gpiomask       = 7,
2593                .muxsel         = MUXSEL(2, 3, 1, 1),
2594                .gpiomux        = { 0, 1, 2, 3 },
2595                .gpiomute       = 4,
2596                .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2597                .tuner_addr     = ADDR_UNSET,
2598                .pll            = PLL_28,
2599                .has_radio      = 1,
2600                .has_remote     = 1,
2601        },
2602        [BTTV_BOARD_SSAI_SECURITY] = {
2603                .name           = "SSAI Security Video Interface",
2604                .video_inputs   = 4,
2605                /* .audio_inputs= 0, */
2606                .svhs           = NO_SVHS,
2607                .muxsel         = MUXSEL(0, 1, 2, 3),
2608                .tuner_type     = TUNER_ABSENT,
2609                .tuner_addr     = ADDR_UNSET,
2610        },
2611        [BTTV_BOARD_SSAI_ULTRASOUND] = {
2612                .name           = "SSAI Ultrasound Video Interface",
2613                .video_inputs   = 2,
2614                /* .audio_inputs= 0, */
2615                .svhs           = 1,
2616                .muxsel         = MUXSEL(2, 0, 1, 3),
2617                .tuner_type     = TUNER_ABSENT,
2618                .tuner_addr     = ADDR_UNSET,
2619        },
2620        /* ---- card 0x94---------------------------------- */
2621        [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2622                .name           = "DViCO FusionHDTV 2",
2623                .tuner_type     = TUNER_PHILIPS_FCV1236D,
2624                .tuner_addr     = ADDR_UNSET,
2625                .video_inputs   = 3,
2626                /* .audio_inputs= 1, */
2627                .svhs           = 2,
2628                .muxsel         = MUXSEL(2, 3, 1),
2629                .gpiomask       = 0x00e00007,
2630                .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2631                .gpiomute       = 0x00c00007,
2632                .no_msp34xx     = 1,
2633                .no_tda7432     = 1,
2634        },
2635        /* ---- card 0x95---------------------------------- */
2636        [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2637                .name           = "Typhoon TV-Tuner PCI (50684)",
2638                .video_inputs   = 3,
2639                /* .audio_inputs= 1, */
2640                .svhs           = 2,
2641                .gpiomask       = 0x3014f,
2642                .muxsel         = MUXSEL(2, 3, 1, 1),
2643                .gpiomux        = { 0x20001,0x10001, 0, 0 },
2644                .gpiomute       = 10,
2645                .pll            = PLL_28,
2646                .tuner_type     = TUNER_PHILIPS_PAL_I,
2647                .tuner_addr     = ADDR_UNSET,
2648        },
2649        [BTTV_BOARD_GEOVISION_GV600] = {
2650                /* emhn@usb.ve */
2651                .name           = "Geovision GV-600",
2652                .video_inputs   = 16,
2653                /* .audio_inputs= 0, */
2654                .svhs           = NO_SVHS,
2655                .gpiomask       = 0x0,
2656                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2657                .muxsel_hook    = geovision_muxsel,
2658                .gpiomux        = { 0 },
2659                .no_msp34xx     = 1,
2660                .pll            = PLL_28,
2661                .tuner_type     = TUNER_ABSENT,
2662                .tuner_addr     = ADDR_UNSET,
2663        },
2664        [BTTV_BOARD_KOZUMI_KTV_01C] = {
2665                /* Mauro Lacy <mauro@lacy.com.ar>
2666                 * Based on MagicTV and Conceptronic CONTVFMi */
2667
2668                .name           = "Kozumi KTV-01C",
2669                .video_inputs   = 3,
2670                /* .audio_inputs= 1, */
2671                .svhs           = 2,
2672                .gpiomask       = 0x008007,
2673                .muxsel         = MUXSEL(2, 3, 1, 1),
2674                .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2675                .gpiomute       = 3, /* CONTVFMi */
2676                .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2677                .tuner_addr     = ADDR_UNSET,
2678                .pll            = PLL_28,
2679                .has_radio      = 1,
2680                .has_remote     = 1,
2681        },
2682        [BTTV_BOARD_ENLTV_FM_2] = {
2683                /* Encore TV Tuner Pro ENL TV-FM-2
2684                   Mauro Carvalho Chehab <mchehab@infradead.org */
2685                .name           = "Encore ENL TV-FM-2",
2686                .video_inputs   = 3,
2687                /* .audio_inputs= 1, */
2688                .svhs           = 2,
2689                /* bit 6          -> IR disabled
2690                   bit 18/17 = 00 -> mute
2691                               01 -> enable external audio input
2692                               10 -> internal audio input (mono?)
2693                               11 -> internal audio input
2694                 */
2695                .gpiomask       = 0x060040,
2696                .muxsel         = MUXSEL(2, 3, 3),
2697                .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2698                .gpiomute       = 0,
2699                .tuner_type     = TUNER_TCL_MF02GIP_5N,
2700                .tuner_addr     = ADDR_UNSET,
2701                .pll            = PLL_28,
2702                .has_radio      = 1,
2703                .has_remote     = 1,
2704        },
2705        [BTTV_BOARD_VD012] = {
2706                /* D.Heer@Phytec.de */
2707                .name           = "PHYTEC VD-012 (bt878)",
2708                .video_inputs   = 4,
2709                /* .audio_inputs= 0, */
2710                .svhs           = NO_SVHS,
2711                .gpiomask       = 0x00,
2712                .muxsel         = MUXSEL(0, 2, 3, 1),
2713                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2714                .pll            = PLL_28,
2715                .tuner_type     = TUNER_ABSENT,
2716                .tuner_addr     = ADDR_UNSET,
2717        },
2718        [BTTV_BOARD_VD012_X1] = {
2719                /* D.Heer@Phytec.de */
2720                .name           = "PHYTEC VD-012-X1 (bt878)",
2721                .video_inputs   = 4,
2722                /* .audio_inputs= 0, */
2723                .svhs           = 3,
2724                .gpiomask       = 0x00,
2725                .muxsel         = MUXSEL(2, 3, 1),
2726                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2727                .pll            = PLL_28,
2728                .tuner_type     = TUNER_ABSENT,
2729                .tuner_addr     = ADDR_UNSET,
2730        },
2731        [BTTV_BOARD_VD012_X2] = {
2732                /* D.Heer@Phytec.de */
2733                .name           = "PHYTEC VD-012-X2 (bt878)",
2734                .video_inputs   = 4,
2735                /* .audio_inputs= 0, */
2736                .svhs           = 3,
2737                .gpiomask       = 0x00,
2738                .muxsel         = MUXSEL(3, 2, 1),
2739                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2740                .pll            = PLL_28,
2741                .tuner_type     = TUNER_ABSENT,
2742                .tuner_addr     = ADDR_UNSET,
2743        },
2744        [BTTV_BOARD_GEOVISION_GV800S] = {
2745                /* Bruno Christo <bchristo@inf.ufsm.br>
2746                 *
2747                 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2748                 *      1 audio input  per BT878A = 4 audio inputs
2749                 *      4 video inputs per BT878A = 16 video inputs
2750                 * This is the first BT878A chip of the GV-800(S). It's the
2751                 * "master" chip and it controls the video inputs through an
2752                 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2753                 * slaves should use card type 0x9e (following this one).
2754                 * There is a EEPROM on the card which is currently not handled.
2755                 * The audio input is not working yet.
2756                 */
2757                .name           = "Geovision GV-800(S) (master)",
2758                .video_inputs   = 4,
2759                /* .audio_inputs= 1, */
2760                .tuner_type     = TUNER_ABSENT,
2761                .tuner_addr     = ADDR_UNSET,
2762                .svhs           = NO_SVHS,
2763                .gpiomask       = 0xf107f,
2764                .no_gpioirq     = 1,
2765                .muxsel         = MUXSEL(2, 2, 2, 2),
2766                .pll            = PLL_28,
2767                .no_msp34xx     = 1,
2768                .no_tda7432     = 1,
2769                .muxsel_hook    = gv800s_muxsel,
2770        },
2771        [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2772                /* Bruno Christo <bchristo@inf.ufsm.br>
2773                 *
2774                 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2775                 *      1 audio input  per BT878A = 4 audio inputs
2776                 *      4 video inputs per BT878A = 16 video inputs
2777                 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2778                 * and should use this card type.
2779                 * The audio input is not working yet.
2780                 */
2781                .name           = "Geovision GV-800(S) (slave)",
2782                .video_inputs   = 4,
2783                /* .audio_inputs= 1, */
2784                .tuner_type     = TUNER_ABSENT,
2785                .tuner_addr     = ADDR_UNSET,
2786                .svhs           = NO_SVHS,
2787                .gpiomask       = 0x00,
2788                .no_gpioirq     = 1,
2789                .muxsel         = MUXSEL(2, 2, 2, 2),
2790                .pll            = PLL_28,
2791                .no_msp34xx     = 1,
2792                .no_tda7432     = 1,
2793                .muxsel_hook    = gv800s_muxsel,
2794        },
2795        [BTTV_BOARD_PV183] = {
2796                .name           = "ProVideo PV183", /* 0x9f */
2797                .video_inputs   = 2,
2798                /* .audio_inputs= 0, */
2799                .svhs           = NO_SVHS,
2800                .gpiomask       = 0,
2801                .muxsel         = MUXSEL(2, 3),
2802                .gpiomux        = { 0 },
2803                .no_msp34xx     = 1,
2804                .pll            = PLL_28,
2805                .tuner_type     = TUNER_ABSENT,
2806                .tuner_addr     = ADDR_UNSET,
2807        },
2808        /* ---- card 0xa0---------------------------------- */
2809        [BTTV_BOARD_TVT_TD3116] = {
2810                .name           = "Tongwei Video Technology TD-3116",
2811                .video_inputs   = 16,
2812                .gpiomask       = 0xc00ff,
2813                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2814                .muxsel_hook    = td3116_muxsel,
2815                .svhs           = NO_SVHS,
2816                .pll            = PLL_28,
2817                .tuner_type     = TUNER_ABSENT,
2818        },
2819        [BTTV_BOARD_APOSONIC_WDVR] = {
2820                .name           = "Aposonic W-DVR",
2821                .video_inputs   = 4,
2822                .svhs           = NO_SVHS,
2823                .muxsel         = MUXSEL(2, 3, 1, 0),
2824                .tuner_type     = TUNER_ABSENT,
2825        },
2826        [BTTV_BOARD_ADLINK_MPG24] = {
2827                /* Adlink MPG24 */
2828                .name           = "Adlink MPG24",
2829                .video_inputs   = 1,
2830                /* .audio_inputs= 1, */
2831                .svhs           = NO_SVHS,
2832                .muxsel         = MUXSEL(2, 2, 2, 2),
2833                .tuner_type     = UNSET,
2834                .tuner_addr     = ADDR_UNSET,
2835                .pll            = PLL_28,
2836        },
2837        [BTTV_BOARD_BT848_CAP_14] = {
2838                .name           = "Bt848 Capture 14MHz",
2839                .video_inputs   = 4,
2840                .svhs           = 2,
2841                .muxsel         = MUXSEL(2, 3, 1, 0),
2842                .pll            = PLL_14,
2843                .tuner_type     = TUNER_ABSENT,
2844        },
2845        [BTTV_BOARD_CYBERVISION_CV06] = {
2846                .name           = "CyberVision CV06 (SV)",
2847                .video_inputs   = 4,
2848                /* .audio_inputs= 0, */
2849                .svhs           = NO_SVHS,
2850                .muxsel         = MUXSEL(2, 3, 1, 0),
2851                .pll            = PLL_28,
2852                .tuner_type     = TUNER_ABSENT,
2853                .tuner_addr     = ADDR_UNSET,
2854        },
2855        [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
2856                /* Pojar George <geoubuntu@gmail.com> */
2857                .name           = "Kworld V-Stream Xpert TV PVR878",
2858                .video_inputs   = 3,
2859                /* .audio_inputs= 1, */
2860                .svhs           = 2,
2861                .gpiomask       = 0x001c0007,
2862                .muxsel         = MUXSEL(2, 3, 1, 1),
2863                .gpiomux        = { 0, 1, 2, 2 },
2864                .gpiomute       = 3,
2865                .pll            = PLL_28,
2866                .tuner_type     = TUNER_TENA_9533_DI,
2867                .tuner_addr    = ADDR_UNSET,
2868                .has_remote     = 1,
2869                .has_radio      = 1,
2870        },
2871        /* ---- card 0xa6---------------------------------- */
2872        [BTTV_BOARD_PCI_8604PW] = {
2873                /* PCI-8604PW with special unlock sequence */
2874                .name           = "PCI-8604PW",
2875                .video_inputs   = 2,
2876                /* .audio_inputs= 0, */
2877                .svhs           = NO_SVHS,
2878                /* The second input is available on CN4, if populated.
2879                 * The other 5x2 header (CN2?) connects to the same inputs
2880                 * as the on-board BNCs */
2881                .muxsel         = MUXSEL(2, 3),
2882                .tuner_type     = TUNER_ABSENT,
2883                .no_msp34xx     = 1,
2884                .no_tda7432     = 1,
2885                .pll            = PLL_35,
2886        },
2887};
2888
2889static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2890
2891/* ----------------------------------------------------------------------- */
2892
2893static unsigned char eeprom_data[256];
2894
2895/*
2896 * identify card
2897 */
2898void bttv_idcard(struct bttv *btv)
2899{
2900        unsigned int gpiobits;
2901        int i,type;
2902
2903        /* read PCI subsystem ID */
2904        btv->cardid  = btv->c.pci->subsystem_device << 16;
2905        btv->cardid |= btv->c.pci->subsystem_vendor;
2906
2907        if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2908                /* look for the card */
2909                for (type = -1, i = 0; cards[i].id != 0; i++)
2910                        if (cards[i].id  == btv->cardid)
2911                                type = i;
2912
2913                if (type != -1) {
2914                        /* found it */
2915                        pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2916                                btv->c.nr, cards[type].name, cards[type].cardnr,
2917                                btv->cardid & 0xffff,
2918                                (btv->cardid >> 16) & 0xffff);
2919                        btv->c.type = cards[type].cardnr;
2920                } else {
2921                        /* 404 */
2922                        pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2923                                btv->c.nr, btv->cardid & 0xffff,
2924                                (btv->cardid >> 16) & 0xffff);
2925                        pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2926                }
2927        }
2928
2929        /* let the user override the autodetected type */
2930        if (card[btv->c.nr] < bttv_num_tvcards)
2931                btv->c.type=card[btv->c.nr];
2932
2933        /* print which card config we are using */
2934        pr_info("%d: using: %s [card=%d,%s]\n",
2935                btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2936                card[btv->c.nr] < bttv_num_tvcards
2937                ? "insmod option" : "autodetected");
2938
2939        /* overwrite gpio stuff ?? */
2940        if (UNSET == audioall && UNSET == audiomux[0])
2941                return;
2942
2943        if (UNSET != audiomux[0]) {
2944                gpiobits = 0;
2945                for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2946                        bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2947                        gpiobits |= audiomux[i];
2948                }
2949        } else {
2950                gpiobits = audioall;
2951                for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2952                        bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2953                }
2954        }
2955        bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2956        pr_info("%d: gpio config override: mask=0x%x, mux=",
2957                btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2958        for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2959                pr_cont("%s0x%x",
2960                        i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2961        }
2962        pr_cont("\n");
2963}
2964
2965/*
2966 * (most) board specific initialisations goes here
2967 */
2968
2969/* Some Modular Technology cards have an eeprom, but no subsystem ID */
2970static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2971{
2972        int type = -1;
2973
2974        if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2975                type = BTTV_BOARD_MODTEC_205;
2976        else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2977                type = BTTV_BOARD_EURESYS_PICOLO;
2978        else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2979                type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2980
2981        if (-1 != type) {
2982                btv->c.type = type;
2983                pr_info("%d: detected by eeprom: %s [card=%d]\n",
2984                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2985        }
2986}
2987
2988static void flyvideo_gpio(struct bttv *btv)
2989{
2990        int gpio, has_remote, has_radio, is_capture_only;
2991        int is_lr90, has_tda9820_tda9821;
2992        int tuner_type = UNSET, ttype;
2993
2994        gpio_inout(0xffffff, 0);
2995        udelay(8);  /* without this we would see the 0x1800 mask */
2996        gpio = gpio_read();
2997        /* FIXME: must restore OUR_EN ??? */
2998
2999        /* all cards provide GPIO info, some have an additional eeprom
3000         * LR50: GPIO coding can be found lower right CP1 .. CP9
3001         *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3002         *       GPIO14-12: n.c.
3003         * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3004
3005         * lowest 3 bytes are remote control codes (no handshake needed)
3006         * xxxFFF: No remote control chip soldered
3007         * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3008         * Note: Some bits are Audio_Mask !
3009         */
3010        ttype = (gpio & 0x0f0000) >> 16;
3011        switch (ttype) {
3012        case 0x0:
3013                tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3014                break;
3015        case 0x2:
3016                tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3017                break;
3018        case 0x4:
3019                tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3020                break;
3021        case 0x6:
3022                tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3023                break;
3024        case 0xC:
3025                tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3026                break;
3027        default:
3028                pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3029                break;
3030        }
3031
3032        has_remote          =   gpio & 0x800000;
3033        has_radio           =   gpio & 0x400000;
3034        /*   unknown                   0x200000;
3035         *   unknown2                  0x100000; */
3036        is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3037        has_tda9820_tda9821 = !(gpio & 0x004000);
3038        is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3039        /*
3040         * gpio & 0x001000    output bit for audio routing */
3041
3042        if (is_capture_only)
3043                tuner_type = TUNER_ABSENT; /* No tuner present */
3044
3045        pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3046                btv->c.nr, has_radio ? "yes" : "no",
3047                has_remote ? "yes" : "no", tuner_type, gpio);
3048        pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3049                btv->c.nr, is_lr90 ? "yes" : "no",
3050                has_tda9820_tda9821 ? "yes" : "no",
3051                is_capture_only ? "yes" : "no");
3052
3053        if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3054                btv->tuner_type = tuner_type;
3055        btv->has_radio = has_radio;
3056
3057        /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3058         * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3059         * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3060        if (has_tda9820_tda9821)
3061                btv->audio_mode_gpio = lt9415_audio;
3062        /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3063}
3064
3065static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3066                               14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3067static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3068                               1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3069
3070static void miro_pinnacle_gpio(struct bttv *btv)
3071{
3072        int id,msp,gpio;
3073        char *info;
3074
3075        gpio_inout(0xffffff, 0);
3076        gpio = gpio_read();
3077        id   = ((gpio>>10) & 63) -1;
3078        msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3079        if (id < 32) {
3080                btv->tuner_type = miro_tunermap[id];
3081                if (0 == (gpio & 0x20)) {
3082                        btv->has_radio = 1;
3083                        if (!miro_fmtuner[id]) {
3084                                btv->has_tea575x = 1;
3085                                btv->tea_gpio.wren = 6;
3086                                btv->tea_gpio.most = 7;
3087                                btv->tea_gpio.clk  = 8;
3088                                btv->tea_gpio.data = 9;
3089                                tea575x_init(btv);
3090                        }
3091                } else {
3092                        btv->has_radio = 0;
3093                }
3094                if (-1 != msp) {
3095                        if (btv->c.type == BTTV_BOARD_MIRO)
3096                                btv->c.type = BTTV_BOARD_MIROPRO;
3097                        if (btv->c.type == BTTV_BOARD_PINNACLE)
3098                                btv->c.type = BTTV_BOARD_PINNACLEPRO;
3099                }
3100                pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3101                        btv->c.nr, id+1, btv->tuner_type,
3102                        !btv->has_radio ? "no" :
3103                        (btv->has_tea575x ? "tea575x" : "fmtuner"),
3104                        (-1 == msp) ? "no" : "yes");
3105        } else {
3106                /* new cards with microtune tuner */
3107                id = 63 - id;
3108                btv->has_radio = 0;
3109                switch (id) {
3110                case 1:
3111                        info = "PAL / mono";
3112                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3113                        break;
3114                case 2:
3115                        info = "PAL+SECAM / stereo";
3116                        btv->has_radio = 1;
3117                        btv->tda9887_conf = TDA9887_QSS;
3118                        break;
3119                case 3:
3120                        info = "NTSC / stereo";
3121                        btv->has_radio = 1;
3122                        btv->tda9887_conf = TDA9887_QSS;
3123                        break;
3124                case 4:
3125                        info = "PAL+SECAM / mono";
3126                        btv->tda9887_conf = TDA9887_QSS;
3127                        break;
3128                case 5:
3129                        info = "NTSC / mono";
3130                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3131                        break;
3132                case 6:
3133                        info = "NTSC / stereo";
3134                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3135                        break;
3136                case 7:
3137                        info = "PAL / stereo";
3138                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3139                        break;
3140                default:
3141                        info = "oops: unknown card";
3142                        break;
3143                }
3144                if (-1 != msp)
3145                        btv->c.type = BTTV_BOARD_PINNACLEPRO;
3146                pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3147                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3148                btv->tuner_type = TUNER_MT2032;
3149        }
3150}
3151
3152/* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3153#define LM1882_SYNC_DRIVE     0x200000L
3154
3155static void init_ids_eagle(struct bttv *btv)
3156{
3157        gpio_inout(0xffffff,0xFFFF37);
3158        gpio_write(0x200020);
3159
3160        /* flash strobe inverter ?! */
3161        gpio_write(0x200024);
3162
3163        /* switch sync drive off */
3164        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3165
3166        /* set BT848 muxel to 2 */
3167        btaor((2)<<5, ~(2<<5), BT848_IFORM);
3168}
3169
3170/* Muxsel helper for the IDS Eagle.
3171 * the eagles does not use the standard muxsel-bits but
3172 * has its own multiplexer */
3173static void eagle_muxsel(struct bttv *btv, unsigned int input)
3174{
3175        gpio_bits(3, input & 3);
3176
3177        /* composite */
3178        /* set chroma ADC to sleep */
3179        btor(BT848_ADC_C_SLEEP, BT848_ADC);
3180        /* set to composite video */
3181        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3182        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3183
3184        /* switch sync drive off */
3185        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3186}
3187
3188static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3189{
3190        static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3191        gpio_write(masks[input%4]);
3192}
3193
3194/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3195   alarms output
3196
3197   GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3198   assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3199
3200   IN - sensor inputs, INx - sensor inputs and TI XORed together
3201   O1,O2,O3 - alarm outputs (relays)
3202
3203   OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3204
3205*/
3206
3207static void init_lmlbt4x(struct bttv *btv)
3208{
3209        pr_debug("LMLBT4x init\n");
3210        btwrite(0x000000, BT848_GPIO_REG_INP);
3211        gpio_inout(0xffffff, 0x0006C0);
3212        gpio_write(0x000000);
3213}
3214
3215static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3216{
3217        unsigned int inmux = input % 8;
3218        gpio_inout( 0xf, 0xf );
3219        gpio_bits( 0xf, inmux );
3220}
3221
3222static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3223{
3224        unsigned int inmux = input % 4;
3225        gpio_inout( 3<<9, 3<<9 );
3226        gpio_bits( 3<<9, inmux<<9 );
3227}
3228
3229static void geovision_muxsel(struct bttv *btv, unsigned int input)
3230{
3231        unsigned int inmux = input % 16;
3232        gpio_inout(0xf, 0xf);
3233        gpio_bits(0xf, inmux);
3234}
3235
3236/*
3237 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3238 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3239 * The muxes are controlled via a 74HC373 latch which is connected to
3240 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3241 * Q0 of the latch is connected to the Enable (~E) input of the first
3242 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3243 * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3244 */
3245
3246static void td3116_latch_value(struct bttv *btv, u32 value)
3247{
3248        gpio_bits((1<<18) | 0xff, value);
3249        gpio_bits((1<<18) | 0xff, (1<<18) | value);
3250        udelay(1);
3251        gpio_bits((1<<18) | 0xff, value);
3252}
3253
3254static void td3116_muxsel(struct bttv *btv, unsigned int input)
3255{
3256        u32 value;
3257        u32 highbit;
3258
3259        highbit = (input & 0x8) >> 3 ;
3260
3261        /* Disable outputs and set value in the mux */
3262        value = 0x11; /* Disable outputs */
3263        value |= ((input & 0x7) << 1)  << (4 * highbit);
3264        td3116_latch_value(btv, value);
3265
3266        /* Enable the correct output */
3267        value &= ~0x11;
3268        value |= ((highbit ^ 0x1) << 4) | highbit;
3269        td3116_latch_value(btv, value);
3270}
3271
3272/* ----------------------------------------------------------------------- */
3273
3274static void bttv_reset_audio(struct bttv *btv)
3275{
3276        /*
3277         * BT878A has a audio-reset register.
3278         * 1. This register is an audio reset function but it is in
3279         *    function-0 (video capture) address space.
3280         * 2. It is enough to do this once per power-up of the card.
3281         * 3. There is a typo in the Conexant doc -- it is not at
3282         *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3283         * --//Shrikumar 030609
3284         */
3285        if (btv->id != 878)
3286                return;
3287
3288        if (bttv_debug)
3289                pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3290        btwrite((1<<7), 0x058);
3291        udelay(10);
3292        btwrite(     0, 0x058);
3293}
3294
3295/* initialization part one -- before registering i2c bus */
3296void bttv_init_card1(struct bttv *btv)
3297{
3298        switch (btv->c.type) {
3299        case BTTV_BOARD_HAUPPAUGE:
3300        case BTTV_BOARD_HAUPPAUGE878:
3301                boot_msp34xx(btv,5);
3302                break;
3303        case BTTV_BOARD_VOODOOTV_200:
3304        case BTTV_BOARD_VOODOOTV_FM:
3305                boot_msp34xx(btv,20);
3306                break;
3307        case BTTV_BOARD_AVERMEDIA98:
3308                boot_msp34xx(btv,11);
3309                break;
3310        case BTTV_BOARD_HAUPPAUGEPVR:
3311                pvr_boot(btv);
3312                break;
3313        case BTTV_BOARD_TWINHAN_DST:
3314        case BTTV_BOARD_AVDVBT_771:
3315        case BTTV_BOARD_PINNACLESAT:
3316                btv->use_i2c_hw = 1;
3317                break;
3318        case BTTV_BOARD_ADLINK_RTV24:
3319                init_RTV24( btv );
3320                break;
3321        case BTTV_BOARD_PCI_8604PW:
3322                init_PCI8604PW(btv);
3323                break;
3324
3325        }
3326        if (!bttv_tvcards[btv->c.type].has_dvb)
3327                bttv_reset_audio(btv);
3328}
3329
3330/* initialization part two -- after registering i2c bus */
3331void bttv_init_card2(struct bttv *btv)
3332{
3333        btv->tuner_type = UNSET;
3334
3335        if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3336                bttv_readee(btv,eeprom_data,0xa0);
3337                identify_by_eeprom(btv,eeprom_data);
3338        }
3339
3340        switch (btv->c.type) {
3341        case BTTV_BOARD_MIRO:
3342        case BTTV_BOARD_MIROPRO:
3343        case BTTV_BOARD_PINNACLE:
3344        case BTTV_BOARD_PINNACLEPRO:
3345                /* miro/pinnacle */
3346                miro_pinnacle_gpio(btv);
3347                break;
3348        case BTTV_BOARD_FLYVIDEO_98:
3349        case BTTV_BOARD_MAXI:
3350        case BTTV_BOARD_LIFE_FLYKIT:
3351        case BTTV_BOARD_FLYVIDEO:
3352        case BTTV_BOARD_TYPHOON_TVIEW:
3353        case BTTV_BOARD_CHRONOS_VS2:
3354        case BTTV_BOARD_FLYVIDEO_98FM:
3355        case BTTV_BOARD_FLYVIDEO2000:
3356        case BTTV_BOARD_FLYVIDEO98EZ:
3357        case BTTV_BOARD_CONFERENCETV:
3358        case BTTV_BOARD_LIFETEC_9415:
3359                flyvideo_gpio(btv);
3360                break;
3361        case BTTV_BOARD_HAUPPAUGE:
3362        case BTTV_BOARD_HAUPPAUGE878:
3363        case BTTV_BOARD_HAUPPAUGEPVR:
3364                /* pick up some config infos from the eeprom */
3365                bttv_readee(btv,eeprom_data,0xa0);
3366                hauppauge_eeprom(btv);
3367                break;
3368        case BTTV_BOARD_AVERMEDIA98:
3369        case BTTV_BOARD_AVPHONE98:
3370                bttv_readee(btv,eeprom_data,0xa0);
3371                avermedia_eeprom(btv);
3372                break;
3373        case BTTV_BOARD_PXC200:
3374                init_PXC200(btv);
3375                break;
3376        case BTTV_BOARD_PICOLO_TETRA_CHIP:
3377                picolo_tetra_init(btv);
3378                break;
3379        case BTTV_BOARD_VHX:
3380                btv->has_radio    = 1;
3381                btv->has_tea575x  = 1;
3382                btv->tea_gpio.wren = 5;
3383                btv->tea_gpio.most = 6;
3384                btv->tea_gpio.clk  = 3;
3385                btv->tea_gpio.data = 4;
3386                tea575x_init(btv);
3387                break;
3388        case BTTV_BOARD_VOBIS_BOOSTAR:
3389        case BTTV_BOARD_TERRATV:
3390                terratec_active_radio_upgrade(btv);
3391                break;
3392        case BTTV_BOARD_MAGICTVIEW061:
3393                if (btv->cardid == 0x3002144f) {
3394                        btv->has_radio=1;
3395                        pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3396                                btv->c.nr);
3397                }
3398                break;
3399        case BTTV_BOARD_STB2:
3400                if (btv->cardid == 0x3060121a) {
3401                        /* Fix up entry for 3DFX VoodooTV 100,
3402                           which is an OEM STB card variant. */
3403                        btv->has_radio=0;
3404                        btv->tuner_type=TUNER_TEMIC_NTSC;
3405                }
3406                break;
3407        case BTTV_BOARD_OSPREY1x0:
3408        case BTTV_BOARD_OSPREY1x0_848:
3409        case BTTV_BOARD_OSPREY101_848:
3410        case BTTV_BOARD_OSPREY1x1:
3411        case BTTV_BOARD_OSPREY1x1_SVID:
3412        case BTTV_BOARD_OSPREY2xx:
3413        case BTTV_BOARD_OSPREY2x0_SVID:
3414        case BTTV_BOARD_OSPREY2x0:
3415        case BTTV_BOARD_OSPREY440:
3416        case BTTV_BOARD_OSPREY500:
3417        case BTTV_BOARD_OSPREY540:
3418        case BTTV_BOARD_OSPREY2000:
3419                bttv_readee(btv,eeprom_data,0xa0);
3420                osprey_eeprom(btv, eeprom_data);
3421                break;
3422        case BTTV_BOARD_IDS_EAGLE:
3423                init_ids_eagle(btv);
3424                break;
3425        case BTTV_BOARD_MODTEC_205:
3426                bttv_readee(btv,eeprom_data,0xa0);
3427                modtec_eeprom(btv);
3428                break;
3429        case BTTV_BOARD_LMLBT4:
3430                init_lmlbt4x(btv);
3431                break;
3432        case BTTV_BOARD_TIBET_CS16:
3433                tibetCS16_init(btv);
3434                break;
3435        case BTTV_BOARD_KODICOM_4400R:
3436                kodicom4400r_init(btv);
3437                break;
3438        case BTTV_BOARD_GEOVISION_GV800S:
3439                gv800s_init(btv);
3440                break;
3441        }
3442
3443        /* pll configuration */
3444        if (!(btv->id==848 && btv->revision==0x11)) {
3445                /* defaults from card list */
3446                if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3447                        btv->pll.pll_ifreq=28636363;
3448                        btv->pll.pll_crystal=BT848_IFORM_XT0;
3449                }
3450                if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3451                        btv->pll.pll_ifreq=35468950;
3452                        btv->pll.pll_crystal=BT848_IFORM_XT1;
3453                }
3454                if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
3455                        btv->pll.pll_ifreq = 14318181;
3456                        btv->pll.pll_crystal = BT848_IFORM_XT0;
3457                }
3458                /* insmod options can override */
3459                switch (pll[btv->c.nr]) {
3460                case 0: /* none */
3461                        btv->pll.pll_crystal = 0;
3462                        btv->pll.pll_ifreq   = 0;
3463                        btv->pll.pll_ofreq   = 0;
3464                        break;
3465                case 1: /* 28 MHz */
3466                case 28:
3467                        btv->pll.pll_ifreq   = 28636363;
3468                        btv->pll.pll_ofreq   = 0;
3469                        btv->pll.pll_crystal = BT848_IFORM_XT0;
3470                        break;
3471                case 2: /* 35 MHz */
3472                case 35:
3473                        btv->pll.pll_ifreq   = 35468950;
3474                        btv->pll.pll_ofreq   = 0;
3475                        btv->pll.pll_crystal = BT848_IFORM_XT1;
3476                        break;
3477                case 3: /* 14 MHz */
3478                case 14:
3479                        btv->pll.pll_ifreq   = 14318181;
3480                        btv->pll.pll_ofreq   = 0;
3481                        btv->pll.pll_crystal = BT848_IFORM_XT0;
3482                        break;
3483                }
3484        }
3485        btv->pll.pll_current = -1;
3486
3487        /* tuner configuration (from card list / autodetect / insmod option) */
3488        if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3489                if (UNSET == btv->tuner_type)
3490                        btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3491        if (UNSET != tuner[btv->c.nr])
3492                btv->tuner_type = tuner[btv->c.nr];
3493
3494        if (btv->tuner_type == TUNER_ABSENT)
3495                pr_info("%d: tuner absent\n", btv->c.nr);
3496        else if (btv->tuner_type == UNSET)
3497                pr_warn("%d: tuner type unset\n", btv->c.nr);
3498        else
3499                pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3500
3501        if (autoload != UNSET) {
3502                pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3503                pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3504                        btv->c.nr);
3505        }
3506
3507        if (UNSET == btv->tuner_type)
3508                btv->tuner_type = TUNER_ABSENT;
3509
3510        btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3511                   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3512        btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3513                    UNSET : bttv_tvcards[btv->c.type].svhs;
3514        if (svhs[btv->c.nr] != UNSET)
3515                btv->svhs = svhs[btv->c.nr];
3516        if (remote[btv->c.nr] != UNSET)
3517                btv->has_remote = remote[btv->c.nr];
3518
3519        if (bttv_tvcards[btv->c.type].has_radio)
3520                btv->has_radio = 1;
3521        if (bttv_tvcards[btv->c.type].has_remote)
3522                btv->has_remote = 1;
3523        if (!bttv_tvcards[btv->c.type].no_gpioirq)
3524                btv->gpioirq = 1;
3525        if (bttv_tvcards[btv->c.type].volume_gpio)
3526                btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3527        if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3528                btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3529
3530        if (btv->tuner_type == TUNER_ABSENT)
3531                return;  /* no tuner or related drivers to load */
3532
3533        if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3534                /* Probe for RDS receiver chip */
3535                static const unsigned short addrs[] = {
3536                        0x20 >> 1,
3537                        0x22 >> 1,
3538                        I2C_CLIENT_END
3539                };
3540                struct v4l2_subdev *sd;
3541
3542                sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3543                        &btv->c.i2c_adap, "saa6588", 0, addrs);
3544                btv->has_saa6588 = (sd != NULL);
3545        }
3546
3547        /* try to detect audio/fader chips */
3548
3549        /* First check if the user specified the audio chip via a module
3550           option. */
3551
3552        switch (audiodev[btv->c.nr]) {
3553        case -1:
3554                return; /* do not load any audio module */
3555
3556        case 0: /* autodetect */
3557                break;
3558
3559        case 1: {
3560                /* The user specified that we should probe for msp3400 */
3561                static const unsigned short addrs[] = {
3562                        I2C_ADDR_MSP3400 >> 1,
3563                        I2C_ADDR_MSP3400_ALT >> 1,
3564                        I2C_CLIENT_END
3565                };
3566
3567                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3568                        &btv->c.i2c_adap, "msp3400", 0, addrs);
3569                if (btv->sd_msp34xx)
3570                        return;
3571                goto no_audio;
3572        }
3573
3574        case 2: {
3575                /* The user specified that we should probe for tda7432 */
3576                static const unsigned short addrs[] = {
3577                        I2C_ADDR_TDA7432 >> 1,
3578                        I2C_CLIENT_END
3579                };
3580
3581                if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3582                                &btv->c.i2c_adap, "tda7432", 0, addrs))
3583                        return;
3584                goto no_audio;
3585        }
3586
3587        case 3: {
3588                /* The user specified that we should probe for tvaudio */
3589                btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3590                        &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3591                if (btv->sd_tvaudio)
3592                        return;
3593                goto no_audio;
3594        }
3595
3596        default:
3597                pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3598                return;
3599        }
3600
3601        /* There were no overrides, so now we try to discover this through the
3602           card definition */
3603
3604        /* probe for msp3400 first: this driver can detect whether or not
3605           it really is a msp3400, so it will return NULL when the device
3606           found is really something else (e.g. a tea6300). */
3607        if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3608                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3609                        &btv->c.i2c_adap, "msp3400",
3610                        0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3611        } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3612                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3613                        &btv->c.i2c_adap, "msp3400",
3614                        0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3615        }
3616
3617        /* If we found a msp34xx, then we're done. */
3618        if (btv->sd_msp34xx)
3619                return;
3620
3621        /* Now see if we can find one of the tvaudio devices. */
3622        btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3623                &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3624        if (btv->sd_tvaudio) {
3625                /* There may be two tvaudio chips on the card, so try to
3626                   find another. */
3627                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3628                        &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3629        }
3630
3631        /* it might also be a tda7432. */
3632        if (!bttv_tvcards[btv->c.type].no_tda7432) {
3633                static const unsigned short addrs[] = {
3634                        I2C_ADDR_TDA7432 >> 1,
3635                        I2C_CLIENT_END
3636                };
3637
3638                btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3639                                &btv->c.i2c_adap, "tda7432", 0, addrs);
3640                if (btv->sd_tda7432)
3641                        return;
3642        }
3643        if (btv->sd_tvaudio)
3644                return;
3645
3646no_audio:
3647        pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3648}
3649
3650
3651/* initialize the tuner */
3652void bttv_init_tuner(struct bttv *btv)
3653{
3654        int addr = ADDR_UNSET;
3655
3656        if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3657                addr = bttv_tvcards[btv->c.type].tuner_addr;
3658
3659        if (btv->tuner_type != TUNER_ABSENT) {
3660                struct tuner_setup tun_setup;
3661
3662                /* Load tuner module before issuing tuner config call! */
3663                if (btv->has_radio)
3664                        v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3665                                &btv->c.i2c_adap, "tuner",
3666                                0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3667                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3668                                &btv->c.i2c_adap, "tuner",
3669                                0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3670                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3671                                &btv->c.i2c_adap, "tuner",
3672                                0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3673
3674                tun_setup.mode_mask = T_ANALOG_TV;
3675                tun_setup.type = btv->tuner_type;
3676                tun_setup.addr = addr;
3677
3678                if (btv->has_radio)
3679                        tun_setup.mode_mask |= T_RADIO;
3680
3681                bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3682        }
3683
3684        if (btv->tda9887_conf) {
3685                struct v4l2_priv_tun_config tda9887_cfg;
3686
3687                tda9887_cfg.tuner = TUNER_TDA9887;
3688                tda9887_cfg.priv = &btv->tda9887_conf;
3689
3690                bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3691        }
3692}
3693
3694/* ----------------------------------------------------------------------- */
3695
3696static void modtec_eeprom(struct bttv *btv)
3697{
3698        if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3699                btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3700                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3701                        btv->c.nr, &eeprom_data[0x1e]);
3702        } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3703                btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3704                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3705                        btv->c.nr, &eeprom_data[0x1e]);
3706        } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3707                btv->tuner_type=TUNER_PHILIPS_NTSC;
3708                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3709                        btv->c.nr, &eeprom_data[0x1e]);
3710        } else {
3711                pr_info("%d: Modtec: Unknown TunerString: %s\n",
3712                        btv->c.nr, &eeprom_data[0x1e]);
3713        }
3714}
3715
3716static void hauppauge_eeprom(struct bttv *btv)
3717{
3718        struct tveeprom tv;
3719
3720        tveeprom_hauppauge_analog(&tv, eeprom_data);
3721        btv->tuner_type = tv.tuner_type;
3722        btv->has_radio  = tv.has_radio;
3723
3724        pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3725                btv->c.nr, tv.model);
3726
3727        /*
3728         * Some of the 878 boards have duplicate PCI IDs. Switch the board
3729         * type based on model #.
3730         */
3731        if(tv.model == 64900) {
3732                pr_info("%d: Switching board type from %s to %s\n",
3733                        btv->c.nr,
3734                        bttv_tvcards[btv->c.type].name,
3735                        bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3736                btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3737        }
3738
3739        /* The 61334 needs the msp3410 to do the radio demod to get sound */
3740        if (tv.model == 61334)
3741                btv->radio_uses_msp_demodulator = 1;
3742}
3743
3744/* ----------------------------------------------------------------------- */
3745
3746static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
3747{
3748        struct bttv *btv = tea->private_data;
3749        struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3750        u16 val = 0;
3751
3752        val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
3753        val |= (pins & TEA575X_CLK)  ? (1 << gpio.clk)  : 0;
3754        val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
3755
3756        gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
3757        if (btv->mbox_ior) {
3758                /* IOW and CSEL active */
3759                gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3760                udelay(5);
3761                /* all inactive */
3762                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3763                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3764        }
3765}
3766
3767static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
3768{
3769        struct bttv *btv = tea->private_data;
3770        struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3771        u8 ret = 0;
3772        u16 val;
3773
3774        if (btv->mbox_ior) {
3775                /* IOR and CSEL active */
3776                gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
3777                udelay(5);
3778        }
3779        val = gpio_read();
3780        if (btv->mbox_ior) {
3781                /* all inactive */
3782                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3783                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3784        }
3785
3786        if (val & (1 << gpio.data))
3787                ret |= TEA575X_DATA;
3788        if (val & (1 << gpio.most))
3789                ret |= TEA575X_MOST;
3790
3791        return ret;
3792}
3793
3794static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
3795{
3796        struct bttv *btv = tea->private_data;
3797        struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3798        u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
3799                   (1 << gpio.most);
3800
3801        if (output)
3802                gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
3803                                 (1 << gpio.wren));
3804        else
3805                gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
3806}
3807
3808static const struct snd_tea575x_ops bttv_tea_ops = {
3809        .set_pins = bttv_tea575x_set_pins,
3810        .get_pins = bttv_tea575x_get_pins,
3811        .set_direction = bttv_tea575x_set_direction,
3812};
3813
3814static int tea575x_init(struct bttv *btv)
3815{
3816        btv->tea.private_data = btv;
3817        btv->tea.ops = &bttv_tea_ops;
3818        if (!snd_tea575x_hw_init(&btv->tea)) {
3819                pr_info("%d: detected TEA575x radio\n", btv->c.nr);
3820                btv->tea.mute = false;
3821                return 0;
3822        }
3823
3824        btv->has_tea575x = 0;
3825        btv->has_radio = 0;
3826
3827        return -ENODEV;
3828}
3829
3830/* ----------------------------------------------------------------------- */
3831
3832static int terratec_active_radio_upgrade(struct bttv *btv)
3833{
3834        btv->has_radio    = 1;
3835        btv->has_tea575x  = 1;
3836        btv->tea_gpio.wren = 4;
3837        btv->tea_gpio.most = 5;
3838        btv->tea_gpio.clk  = 3;
3839        btv->tea_gpio.data = 2;
3840
3841        btv->mbox_iow     = 1 <<  8;
3842        btv->mbox_ior     = 1 <<  9;
3843        btv->mbox_csel    = 1 << 10;
3844
3845        if (!tea575x_init(btv)) {
3846                pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3847                btv->has_saa6588 = 1;
3848        }
3849
3850        return 0;
3851}
3852
3853
3854/* ----------------------------------------------------------------------- */
3855
3856/*
3857 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3858 *
3859 * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3860 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3861 * unpacked with unzip).
3862 */
3863#define PVR_GPIO_DELAY          10
3864
3865#define BTTV_ALT_DATA           0x000001
3866#define BTTV_ALT_DCLK           0x100000
3867#define BTTV_ALT_NCONFIG        0x800000
3868
3869static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3870{
3871        u32 n;
3872        u8 bits;
3873        int i;
3874
3875        gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3876        gpio_write(0);
3877        udelay(PVR_GPIO_DELAY);
3878
3879        gpio_write(BTTV_ALT_NCONFIG);
3880        udelay(PVR_GPIO_DELAY);
3881
3882        for (n = 0; n < microlen; n++) {
3883                bits = micro[n];
3884                for (i = 0 ; i < 8 ; i++) {
3885                        gpio_bits(BTTV_ALT_DCLK,0);
3886                        if (bits & 0x01)
3887                                gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3888                        else
3889                                gpio_bits(BTTV_ALT_DATA,0);
3890                        gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3891                        bits >>= 1;
3892                }
3893        }
3894        gpio_bits(BTTV_ALT_DCLK,0);
3895        udelay(PVR_GPIO_DELAY);
3896
3897        /* begin Altera init loop (Not necessary,but doesn't hurt) */
3898        for (i = 0 ; i < 30 ; i++) {
3899                gpio_bits(BTTV_ALT_DCLK,0);
3900                gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3901        }
3902        gpio_bits(BTTV_ALT_DCLK,0);
3903        return 0;
3904}
3905
3906static int pvr_boot(struct bttv *btv)
3907{
3908        const struct firmware *fw_entry;
3909        int rc;
3910
3911        rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3912        if (rc != 0) {
3913                pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3914                return rc;
3915        }
3916        rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3917        pr_info("%d: altera firmware upload %s\n",
3918                btv->c.nr, (rc < 0) ? "failed" : "ok");
3919        release_firmware(fw_entry);
3920        return rc;
3921}
3922
3923/* ----------------------------------------------------------------------- */
3924/* some osprey specific stuff                                              */
3925
3926static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3927{
3928        int i;
3929        u32 serial = 0;
3930        int cardid = -1;
3931
3932        /* This code will nevery actually get called in this case.... */
3933        if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3934                /* this might be an antique... check for MMAC label in eeprom */
3935                if (!strncmp(ee, "MMAC", 4)) {
3936                        u8 checksum = 0;
3937                        for (i = 0; i < 21; i++)
3938                                checksum += ee[i];
3939                        if (checksum != ee[21])
3940                                return;
3941                        cardid = BTTV_BOARD_OSPREY1x0_848;
3942                        for (i = 12; i < 21; i++)
3943                                serial *= 10, serial += ee[i] - '0';
3944                }
3945        } else {
3946                unsigned short type;
3947
3948                for (i = 4 * 16; i < 8 * 16; i += 16) {
3949                        u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
3950
3951                        if ((checksum & 0xff) + (checksum >> 8) == 0xff)
3952                                break;
3953                }
3954                if (i >= 8*16)
3955                        return;
3956                ee += i;
3957
3958                /* found a valid descriptor */
3959                type = get_unaligned_be16((__be16 *)(ee+4));
3960
3961                switch(type) {
3962                /* 848 based */
3963                case 0x0004:
3964                        cardid = BTTV_BOARD_OSPREY1x0_848;
3965                        break;
3966                case 0x0005:
3967                        cardid = BTTV_BOARD_OSPREY101_848;
3968                        break;
3969
3970                /* 878 based */
3971                case 0x0012:
3972                case 0x0013:
3973                        cardid = BTTV_BOARD_OSPREY1x0;
3974                        break;
3975                case 0x0014:
3976                case 0x0015:
3977                        cardid = BTTV_BOARD_OSPREY1x1;
3978                        break;
3979                case 0x0016:
3980                case 0x0017:
3981                case 0x0020:
3982                        cardid = BTTV_BOARD_OSPREY1x1_SVID;
3983                        break;
3984                case 0x0018:
3985                case 0x0019:
3986                case 0x001E:
3987                case 0x001F:
3988                        cardid = BTTV_BOARD_OSPREY2xx;
3989                        break;
3990                case 0x001A:
3991                case 0x001B:
3992                        cardid = BTTV_BOARD_OSPREY2x0_SVID;
3993                        break;
3994                case 0x0040:
3995                        cardid = BTTV_BOARD_OSPREY500;
3996                        break;
3997                case 0x0050:
3998                case 0x0056:
3999                        cardid = BTTV_BOARD_OSPREY540;
4000                        /* bttv_osprey_540_init(btv); */
4001                        break;
4002                case 0x0060:
4003                case 0x0070:
4004                case 0x00A0:
4005                        cardid = BTTV_BOARD_OSPREY2x0;
4006                        /* enable output on select control lines */
4007                        gpio_inout(0xffffff,0x000303);
4008                        break;
4009                case 0x00D8:
4010                        cardid = BTTV_BOARD_OSPREY440;
4011                        break;
4012                default:
4013                        /* unknown...leave generic, but get serial # */
4014                        pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
4015                                btv->c.nr, type);
4016                        break;
4017                }
4018                serial = get_unaligned_be32((__be32 *)(ee+6));
4019        }
4020
4021        pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
4022                btv->c.nr, cardid,
4023                cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
4024
4025        if (cardid<0 || btv->c.type == cardid)
4026                return;
4027
4028        /* card type isn't set correctly */
4029        if (card[btv->c.nr] < bttv_num_tvcards) {
4030                pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
4031                        btv->c.nr);
4032        } else {
4033                pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
4034                        btv->c.nr, btv->c.type, cardid);
4035                btv->c.type = cardid;
4036        }
4037}
4038
4039/* ----------------------------------------------------------------------- */
4040/* AVermedia specific stuff, from  bktr_card.c                             */
4041
4042static int tuner_0_table[] = {
4043        TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
4044        TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
4045        TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
4046        TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
4047        TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
4048        TUNER_PHILIPS_FM1216ME_MK3 };
4049
4050static int tuner_1_table[] = {
4051        TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
4052        TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4053        TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4054        TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
4055        TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
4056
4057static void avermedia_eeprom(struct bttv *btv)
4058{
4059        int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
4060
4061        tuner_make      = (eeprom_data[0x41] & 0x7);
4062        tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
4063        tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
4064        btv->has_remote = (eeprom_data[0x42] & 0x01);
4065
4066        if (tuner_make == 0 || tuner_make == 2)
4067                if (tuner_format <= 0x0a)
4068                        tuner_type = tuner_0_table[tuner_format];
4069        if (tuner_make == 1)
4070                if (tuner_format <= 9)
4071                        tuner_type = tuner_1_table[tuner_format];
4072
4073        if (tuner_make == 4)
4074                if (tuner_format == 0x09)
4075                        tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
4076
4077        pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
4078                btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
4079        if (tuner_type) {
4080                btv->tuner_type = tuner_type;
4081                pr_cont("%d", tuner_type);
4082        } else
4083                pr_cont("Unknown type");
4084        pr_cont(" radio:%s remote control:%s\n",
4085               tuner_tv_fm     ? "yes" : "no",
4086               btv->has_remote ? "yes" : "no");
4087}
4088
4089/*
4090 * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
4091 * analog demod, which is not I2C controlled like the newer and more common
4092 * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
4093 * that control the IF for the video and audio.  Apparently, bttv GPIO
4094 * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4095 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4096 */
4097u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4098{
4099
4100        if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
4101                if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4102                        gpiobits |= 0x10000;
4103                else
4104                        gpiobits &= ~0x10000;
4105        }
4106
4107        gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4108        return gpiobits;
4109}
4110
4111
4112/*
4113 * reset/enable the MSP on some Hauppauge cards
4114 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4115 *
4116 * Hauppauge:  pin  5
4117 * Voodoo:     pin 20
4118 */
4119static void boot_msp34xx(struct bttv *btv, int pin)
4120{
4121        int mask = (1 << pin);
4122
4123        gpio_inout(mask,mask);
4124        gpio_bits(mask,0);
4125        mdelay(2);
4126        udelay(500);
4127        gpio_bits(mask,mask);
4128
4129        if (bttv_gpio)
4130                bttv_gpio_tracking(btv,"msp34xx");
4131        if (bttv_verbose)
4132                pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4133                        btv->c.nr, pin);
4134}
4135
4136/* ----------------------------------------------------------------------- */
4137/*  Imagenation L-Model PXC200 Framegrabber */
4138/*  This is basically the same procedure as
4139 *  used by Alessandro Rubini in his pxc200
4140 *  driver, but using BTTV functions */
4141
4142static void init_PXC200(struct bttv *btv)
4143{
4144        static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
4145                              0x03, 0x04, 0x05, 0x06, 0x00 };
4146        unsigned int i;
4147        int tmp;
4148        u32 val;
4149
4150        /* Initialise GPIO-connevted stuff */
4151        gpio_inout(0xffffff, (1<<13));
4152        gpio_write(0);
4153        udelay(3);
4154        gpio_write(1<<13);
4155        /* GPIO inputs are pulled up, so no need to drive
4156         * reset pin any longer */
4157        gpio_bits(0xffffff, 0);
4158        if (bttv_gpio)
4159                bttv_gpio_tracking(btv,"pxc200");
4160
4161        /*  we could/should try and reset/control the AD pots? but
4162            right now  we simply  turned off the crushing.  Without
4163            this the AGC drifts drifts
4164            remember the EN is reverse logic -->
4165            setting BT848_ADC_AGC_EN disable the AGC
4166            tboult@eecs.lehigh.edu
4167        */
4168
4169        btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4170
4171        /*      Initialise MAX517 DAC */
4172        pr_info("Setting DAC reference voltage level ...\n");
4173        bttv_I2CWrite(btv,0x5E,0,0x80,1);
4174
4175        /*      Initialise 12C508 PIC */
4176        /*      The I2CWrite and I2CRead commmands are actually to the
4177         *      same chips - but the R/W bit is included in the address
4178         *      argument so the numbers are different */
4179
4180
4181        pr_info("Initialising 12C508 PIC chip ...\n");
4182
4183        /* First of all, enable the clock line. This is used in the PXC200-F */
4184        val = btread(BT848_GPIO_DMA_CTL);
4185        val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4186        btwrite(val, BT848_GPIO_DMA_CTL);
4187
4188        /* Then, push to 0 the reset pin long enough to reset the *
4189         * device same as above for the reset line, but not the same
4190         * value sent to the GPIO-connected stuff
4191         * which one is the good one? */
4192        gpio_inout(0xffffff,(1<<2));
4193        gpio_write(0);
4194        udelay(10);
4195        gpio_write(1<<2);
4196
4197        for (i = 0; i < ARRAY_SIZE(vals); i++) {
4198                tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4199                if (tmp != -1) {
4200                        pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4201                               vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4202                }
4203        }
4204
4205        pr_info("PXC200 Initialised\n");
4206}
4207
4208
4209
4210/* ----------------------------------------------------------------------- */
4211/*
4212 *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4213 *  it. This apparently involves the following procedure for each 878 chip:
4214 *
4215 *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4216 *
4217 *  2)  write to GPIO_DATA
4218 *      - 0x0E
4219 *      - sleep 1ms
4220 *      - 0x10 + 0x0E
4221 *      - sleep 10ms
4222 *      - 0x0E
4223 *     read from GPIO_DATA into buf (uint_32)
4224 *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4225 *                 error. ERROR_CPLD_Check_Failed stop.
4226 *
4227 *  3) write to GPIO_DATA
4228 *      - write 0x4400 + 0x0E
4229 *      - sleep 10ms
4230 *      - write 0x4410 + 0x0E
4231 *      - sleep 1ms
4232 *      - write 0x0E
4233 *     read from GPIO_DATA into buf (uint_32)
4234 *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4235 *                error. ERROR_CPLD_Check_Failed.
4236 */
4237/* ----------------------------------------------------------------------- */
4238static void
4239init_RTV24 (struct bttv *btv)
4240{
4241        uint32_t dataRead = 0;
4242        long watchdog_value = 0x0E;
4243
4244        pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4245                btv->c.nr);
4246
4247        btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4248
4249        btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4250        msleep (1);
4251        btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4252        msleep (10);
4253        btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4254
4255        dataRead = btread (BT848_GPIO_DATA);
4256
4257        if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4258                pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4259                        btv->c.nr, dataRead);
4260        }
4261
4262        btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4263        msleep (10);
4264        btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4265        msleep (1);
4266        btwrite (watchdog_value, BT848_GPIO_DATA);
4267        msleep (1);
4268        dataRead = btread (BT848_GPIO_DATA);
4269
4270        if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4271                pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4272                        btv->c.nr, dataRead);
4273
4274                return;
4275        }
4276
4277        pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4278}
4279
4280
4281
4282/* ----------------------------------------------------------------------- */
4283/*
4284 *  The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
4285 *  the PCI REQ signals comming from the four BT878 chips. After power
4286 *  up, the CPLD does not forward requests to the bus, which prevents
4287 *  the BT878 from fetching RISC instructions from memory. While the
4288 *  CPLD is connected to most of the GPIOs of PCI device 0xD, only
4289 *  five appear to play a role in unlocking the REQ signal. The following
4290 *  sequence has been determined by trial and error without access to the
4291 *  original driver.
4292 *
4293 *  Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
4294 *  Devices 0xE and 0xF do not appear to have anything connected to their
4295 *  GPIOs.
4296 *
4297 *  The correct GPIO_OUT_EN value might have some more bits set. It should
4298 *  be possible to derive it from a boundary scan of the CPLD. Its JTAG
4299 *  pins are routed to test points.
4300 *
4301 */
4302/* ----------------------------------------------------------------------- */
4303static void
4304init_PCI8604PW(struct bttv *btv)
4305{
4306        int state;
4307
4308        if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
4309                pr_warn("This is not a PCI-8604PW\n");
4310                return;
4311        }
4312
4313        if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
4314                return;
4315
4316        btwrite(0x080002, BT848_GPIO_OUT_EN);
4317
4318        state = (btread(BT848_GPIO_DATA) >> 21) & 7;
4319
4320        for (;;) {
4321                switch (state) {
4322                case 1:
4323                case 5:
4324                case 6:
4325                case 4:
4326                        pr_debug("PCI-8604PW in state %i, toggling pin\n",
4327                                 state);
4328                        btwrite(0x080000, BT848_GPIO_DATA);
4329                        msleep(1);
4330                        btwrite(0x000000, BT848_GPIO_DATA);
4331                        msleep(1);
4332                        break;
4333                case 7:
4334                        pr_info("PCI-8604PW unlocked\n");
4335                        return;
4336                case 0:
4337                        /* FIXME: If we are in state 7 and toggle GPIO[19] one
4338                           more time, the CPLD goes into state 0, where PCI bus
4339                           mastering is inhibited again. We have not managed to
4340                           get out of that state. */
4341
4342                        pr_err("PCI-8604PW locked until reset\n");
4343                        return;
4344                default:
4345                        pr_err("PCI-8604PW in unknown state %i\n", state);
4346                        return;
4347                }
4348
4349                state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
4350
4351                switch (state) {
4352                case 0x15:
4353                case 0x56:
4354                case 0x64:
4355                case 0x47:
4356                /* The transition from state 7 to state 0 is, as explained
4357                   above, valid but undesired and with this code impossible
4358                   as we exit as soon as we are in state 7.
4359                case 0x70: */
4360                        break;
4361                default:
4362                        pr_err("PCI-8604PW invalid transition %i -> %i\n",
4363                               state >> 4, state & 7);
4364                        return;
4365                }
4366                state &= 7;
4367        }
4368}
4369
4370/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4371 *
4372 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4373 * switch instead (CD22M3494E). This IC can have multiple active connections
4374 * between Xn (input) and Yn (output) pins. We need to clear any existing
4375 * connection prior to establish a new one, pulsing the STROBE pin.
4376 *
4377 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4378 * GPIO pins are wired as:
4379 *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4380 *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4381 *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4382 *  GPIO[8]   -                  - P3[5] (microcontroller)
4383 *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4384 *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4385 *  GPINTR    -                  - P3[4] (microcontroller)
4386 *
4387 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4388 * configuration either directly (as we are doing) or using the microcontroller
4389 * which is also wired to I2C interface. I have no further info on the
4390 * microcontroller features, one would need to disassembly the firmware.
4391 * note: the vendor refused to give any information on this product, all
4392 *       that stuff was found using a multimeter! :)
4393 */
4394static void rv605_muxsel(struct bttv *btv, unsigned int input)
4395{
4396        static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4397                                      0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4398
4399        gpio_bits(0x07f, muxgpio[input]);
4400
4401        /* reset all conections */
4402        gpio_bits(0x200,0x200);
4403        mdelay(1);
4404        gpio_bits(0x200,0x000);
4405        mdelay(1);
4406
4407        /* create a new connection */
4408        gpio_bits(0x480,0x480);
4409        mdelay(1);
4410        gpio_bits(0x480,0x080);
4411        mdelay(1);
4412}
4413
4414/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4415 *
4416 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4417 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4418 * chips, ten eight input analog multiplexors, a not chip and a few
4419 * other components.
4420 *
4421 * 16 inputs on a secondary bracket are provided and can be selected
4422 * from each of the four capture chips.  Two of the eight input
4423 * multiplexors are used to select from any of the 16 input signals.
4424 *
4425 * Unsupported hardware capabilities:
4426 *  . A video output monitor on the secondary bracket can be selected from
4427 *    one of the 878A chips.
4428 *  . Another passthrough but I haven't spent any time investigating it.
4429 *  . Digital I/O (logic level connected to GPIO) is available from an
4430 *    onboard header.
4431 *
4432 * The on chip input mux should always be set to 2.
4433 * GPIO[16:19] - Video input selection
4434 * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4435 * GPIO[?:?]   - Digital I/O.
4436 *
4437 * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4438 * determined what function (if any) it provides.  With the microcontroller
4439 * and sync separator chips a guess is that it might have to do with video
4440 * switching and maybe some digital I/O.
4441 */
4442static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4443{
4444        /* video mux */
4445        gpio_bits(0x0f0000, input << 16);
4446}
4447
4448static void tibetCS16_init(struct bttv *btv)
4449{
4450        /* enable gpio bits, mask obtained via btSpy */
4451        gpio_inout(0xffffff, 0x0f7fff);
4452        gpio_write(0x0f7fff);
4453}
4454
4455/*
4456 * The following routines for the Kodicom-4400r get a little mind-twisting.
4457 * There is a "master" controller and three "slave" controllers, together
4458 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4459 * The analog switch is controlled by the "master", but the detection order
4460 * of the four BT878A chips is in an order which I just don't understand.
4461 * The "master" is actually the second controller to be detected.  The
4462 * logic on the board uses logical numbers for the 4 controllers, but
4463 * those numbers are different from the detection sequence.  When working
4464 * with the analog switch, we need to "map" from the detection sequence
4465 * over to the board's logical controller number.  This mapping sequence
4466 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4467 * unit 3, the second (which is the master) is logical unit 0, etc.
4468 * We need to maintain the status of the analog switch (which of the 16
4469 * cameras is connected to which of the 4 controllers) in sw_status array.
4470 */
4471
4472/*
4473 * First a routine to set the analog switch, which controls which camera
4474 * is routed to which controller.  The switch comprises an X-address
4475 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4476 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4477 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4478 * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4479 * specified address.  The idea is to set the address and data, then bring
4480 * STROBE high, and finally bring STROBE back to low.
4481 */
4482static void kodicom4400r_write(struct bttv *btv,
4483                               unsigned char xaddr,
4484                               unsigned char yaddr,
4485                               unsigned char data) {
4486        unsigned int udata;
4487
4488        udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4489        gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4490        gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4491        gpio_bits(0x1ff, udata);                /* strobe low */
4492}
4493
4494/*
4495 * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4496 * use this routine.  The routine finds the "master" for the card, maps
4497 * the controller number from the detected position over to the logical
4498 * number, writes the appropriate data to the analog switch, and housekeeps
4499 * the local copy of the switch information.  The parameter 'input' is the
4500 * requested camera number (0 - 15).
4501 */
4502static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4503{
4504        int xaddr, yaddr;
4505        struct bttv *mctlr;
4506        static unsigned char map[4] = {3, 0, 2, 1};
4507
4508        mctlr = master[btv->c.nr];
4509        if (mctlr == NULL) {    /* ignore if master not yet detected */
4510                return;
4511        }
4512        yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4513        yaddr = map[yaddr];
4514        xaddr = input & 0xf;
4515        /* Check if the controller/camera pair has changed, else ignore */
4516        if (mctlr->sw_status[yaddr] != xaddr)
4517        {
4518                /* "open" the old switch, "close" the new one, save the new */
4519                kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4520                mctlr->sw_status[yaddr] = xaddr;
4521                kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4522        }
4523}
4524
4525/*
4526 * During initialisation, we need to reset the analog switch.  We
4527 * also preset the switch to map the 4 connectors on the card to the
4528 * *user's* (see above description of kodicom4400r_muxsel) channels
4529 * 0 through 3
4530 */
4531static void kodicom4400r_init(struct bttv *btv)
4532{
4533        int ix;
4534
4535        gpio_inout(0x0003ff, 0x0003ff);
4536        gpio_write(1 << 9);     /* reset MUX */
4537        gpio_write(0);
4538        /* Preset camera 0 to the 4 controllers */
4539        for (ix = 0; ix < 4; ix++) {
4540                btv->sw_status[ix] = ix;
4541                kodicom4400r_write(btv, ix, ix, 1);
4542        }
4543        /*
4544         * Since this is the "master", we need to set up the
4545         * other three controller chips' pointers to this structure
4546         * for later use in the muxsel routine.
4547         */
4548        if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4549            return;
4550        master[btv->c.nr-1] = btv;
4551        master[btv->c.nr]   = btv;
4552        master[btv->c.nr+1] = btv;
4553        master[btv->c.nr+2] = btv;
4554}
4555
4556/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4557 * video multiplexers to provide up to 16 video inputs. These
4558 * multiplexers are controlled by the lower 8 GPIO pins of the
4559 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4560
4561 * xxx0 is pin xxx of multiplexer U5,
4562 * yyy1 is pin yyy of multiplexer U2
4563 */
4564#define ENA0    0x01
4565#define ENB0    0x02
4566#define ENA1    0x04
4567#define ENB1    0x08
4568
4569#define IN10    0x10
4570#define IN00    0x20
4571#define IN11    0x40
4572#define IN01    0x80
4573
4574static void xguard_muxsel(struct bttv *btv, unsigned int input)
4575{
4576        static const int masks[] = {
4577                ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4578                ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4579                ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4580                ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4581        };
4582        gpio_write(masks[input%16]);
4583}
4584static void picolo_tetra_init(struct bttv *btv)
4585{
4586        /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4587        btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4588        btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4589}
4590static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4591{
4592
4593        dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4594        /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4595        /*GPIO[20]&GPIO[21] used to choose the right input*/
4596        btwrite (input<<20,BT848_GPIO_DATA);
4597
4598}
4599
4600/*
4601 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4602 *
4603 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4604 * swichers to provide 16 channels to MUX0. The TDA8540's have
4605 * 4 independent outputs and as such the IVC120G also has the
4606 * optional "Monitor Out" bus. This allows the card to be looking
4607 * at one input while the monitor is looking at another.
4608 *
4609 * Since I've couldn't be bothered figuring out how to add an
4610 * independent muxsel for the monitor bus, I've just set it to
4611 * whatever the card is looking at.
4612 *
4613 *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4614 *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4615 *
4616 *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4617 *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4618 *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4619 *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4620 *
4621 */
4622
4623/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4624#define I2C_TDA8540        0x90
4625#define I2C_TDA8540_ALT1   0x92
4626#define I2C_TDA8540_ALT2   0x94
4627#define I2C_TDA8540_ALT3   0x96
4628#define I2C_TDA8540_ALT4   0x98
4629#define I2C_TDA8540_ALT5   0x9a
4630#define I2C_TDA8540_ALT6   0x9c
4631
4632static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4633{
4634        /* Simple maths */
4635        int key = input % 4;
4636        int matrix = input / 4;
4637
4638        dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4639                btv->c.nr, input, matrix, key);
4640
4641        /* Handles the input selection on the TDA8540's */
4642        bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4643                      ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4644        bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4645                      ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4646        bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4647                      ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4648        bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4649                      ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4650
4651        /* Handles the output enables on the TDA8540's */
4652        bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4653                      ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4654        bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4655                      ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4656        bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4657                      ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4658        bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4659                      ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4660
4661        /* 878's MUX0 is already selected for input via muxsel values */
4662}
4663
4664
4665/* PXC200 muxsel helper
4666 * luke@syseng.anu.edu.au
4667 * another transplant
4668 * from Alessandro Rubini (rubini@linux.it)
4669 *
4670 * There are 4 kinds of cards:
4671 * PXC200L which is bt848
4672 * PXC200F which is bt848 with PIC controlling mux
4673 * PXC200AL which is bt878
4674 * PXC200AF which is bt878 with PIC controlling mux
4675 */
4676#define PX_CFG_PXC200F 0x01
4677#define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4678#define PX_I2C_PIC       0x0f
4679#define PX_PXC200A_CARDID 0x200a1295
4680#define PX_I2C_CMD_CFG   0x00
4681
4682static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4683{
4684        int rc;
4685        long mux;
4686        int bitmask;
4687        unsigned char buf[2];
4688
4689        /* Read PIC config to determine if this is a PXC200F */
4690        /* PX_I2C_CMD_CFG*/
4691        buf[0]=0;
4692        buf[1]=0;
4693        rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4694        if (rc) {
4695                pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4696                         btv->c.nr, rc);
4697          /* not PXC ? do nothing */
4698                return;
4699        }
4700
4701        rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4702        if (!(rc & PX_CFG_PXC200F)) {
4703                pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4704                         btv->c.nr, rc);
4705                return;
4706        }
4707
4708
4709        /* The multiplexer in the 200F is handled by the GPIO port */
4710        /* get correct mapping between inputs  */
4711        /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4712        /* ** not needed!?   */
4713        mux = input;
4714
4715        /* make sure output pins are enabled */
4716        /* bitmask=0x30f; */
4717        bitmask=0x302;
4718        /* check whether we have a PXC200A */
4719        if (btv->cardid == PX_PXC200A_CARDID)  {
4720           bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4721           bitmask |= 7<<4; /* the DAC */
4722        }
4723        btwrite(bitmask, BT848_GPIO_OUT_EN);
4724
4725        bitmask = btread(BT848_GPIO_DATA);
4726        if (btv->cardid == PX_PXC200A_CARDID)
4727          bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4728        else /* older device */
4729          bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4730        btwrite(bitmask,BT848_GPIO_DATA);
4731
4732        /*
4733         * Was "to be safe, set the bt848 to input 0"
4734         * Actually, since it's ok at load time, better not messing
4735         * with these bits (on PXC200AF you need to set mux 2 here)
4736         *
4737         * needed because bttv-driver sets mux before calling this function
4738         */
4739        if (btv->cardid == PX_PXC200A_CARDID)
4740          btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4741        else /* older device */
4742          btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4743
4744        pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4745}
4746
4747static void phytec_muxsel(struct bttv *btv, unsigned int input)
4748{
4749        unsigned int mux = input % 4;
4750
4751        if (input == btv->svhs)
4752                mux = 0;
4753
4754        gpio_bits(0x3, mux);
4755}
4756
4757/*
4758 * GeoVision GV-800(S) functions
4759 * Bruno Christo <bchristo@inf.ufsm.br>
4760*/
4761
4762/* This is a function to control the analog switch, which determines which
4763 * camera is routed to which controller.  The switch comprises an X-address
4764 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4765 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4766 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4767 * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4768 * specified address. There is also a chip select (gpio bit 16).
4769 * The idea is to set the address and chip select together, bring
4770 * STROBE high, write the data, and finally bring STROBE back to low.
4771 */
4772static void gv800s_write(struct bttv *btv,
4773                         unsigned char xaddr,
4774                         unsigned char yaddr,
4775                         unsigned char data) {
4776        /* On the "master" 878A:
4777        * GPIO bits 0-9 are used for the analog switch:
4778        *   00 - 03:    camera selector
4779        *   04 - 06:    878A (controller) selector
4780        *   16:         cselect
4781        *   17:         strobe
4782        *   18:         data (1->on, 0->off)
4783        *   19:         reset
4784        */
4785        const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4786        const u32 CSELECT = 1<<16;
4787        const u32 STROBE = 1<<17;
4788        const u32 DATA = data<<18;
4789
4790        gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4791        gpio_bits(0x20000, STROBE);             /* STROBE high */
4792        gpio_bits(0x40000, DATA);               /* write DATA */
4793        gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4794}
4795
4796/*
4797 * GeoVision GV-800(S) muxsel
4798 *
4799 * Each of the 4 cards (controllers) use this function.
4800 * The controller using this function selects the input through the GPIO pins
4801 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4802 *
4803 * The parameter 'input' is the requested camera number (0-4) on the controller.
4804 * The map array has the address of each input. Note that the addresses in the
4805 * array are in the sequence the original GeoVision driver uses, that is, set
4806 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4807 * the physical "camera 1" connector corresponds to controller 0 input 0,
4808 * "camera 2" corresponds to controller 1 input 0, and so on.
4809 *
4810 * After getting the input address, the function then writes the appropriate
4811 * data to the analog switch, and housekeeps the local copy of the switch
4812 * information.
4813 */
4814static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4815{
4816        struct bttv *mctlr;
4817        int xaddr, yaddr;
4818        static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4819                                          { 0x1, 0x5, 0xb, 0x7 },
4820                                          { 0x2, 0x8, 0xc, 0xe },
4821                                          { 0x3, 0x9, 0xd, 0xf } };
4822        input = input%4;
4823        mctlr = master[btv->c.nr];
4824        if (mctlr == NULL) {
4825                /* do nothing until the "master" is detected */
4826                return;
4827        }
4828        yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4829        xaddr = map[yaddr][input] & 0xf;
4830
4831        /* Check if the controller/camera pair has changed, ignore otherwise */
4832        if (mctlr->sw_status[yaddr] != xaddr) {
4833                /* disable the old switch, enable the new one and save status */
4834                gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4835                mctlr->sw_status[yaddr] = xaddr;
4836                gv800s_write(mctlr, xaddr, yaddr, 1);
4837        }
4838}
4839
4840/* GeoVision GV-800(S) "master" chip init */
4841static void gv800s_init(struct bttv *btv)
4842{
4843        int ix;
4844
4845        gpio_inout(0xf107f, 0xf107f);
4846        gpio_write(1<<19); /* reset the analog MUX */
4847        gpio_write(0);
4848
4849        /* Preset camera 0 to the 4 controllers */
4850        for (ix = 0; ix < 4; ix++) {
4851                btv->sw_status[ix] = ix;
4852                gv800s_write(btv, ix, ix, 1);
4853        }
4854
4855        /* Inputs on the "master" controller need this brightness fix */
4856        bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4857
4858        if (btv->c.nr > BTTV_MAX-4)
4859                return;
4860        /*
4861         * Store the "master" controller pointer in the master
4862         * array for later use in the muxsel function.
4863         */
4864        master[btv->c.nr]   = btv;
4865        master[btv->c.nr+1] = btv;
4866        master[btv->c.nr+2] = btv;
4867        master[btv->c.nr+3] = btv;
4868}
4869
4870/* ----------------------------------------------------------------------- */
4871/* motherboard chipset specific stuff                                      */
4872
4873void __init bttv_check_chipset(void)
4874{
4875        int pcipci_fail = 0;
4876        struct pci_dev *dev = NULL;
4877
4878        if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4879                pcipci_fail = 1;
4880        if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4881                triton1 = 1;
4882        if (pci_pci_problems & PCIPCI_VSFX)
4883                vsfx = 1;
4884#ifdef PCIPCI_ALIMAGIK
4885        if (pci_pci_problems & PCIPCI_ALIMAGIK)
4886                latency = 0x0A;
4887#endif
4888
4889
4890        /* print warnings about any quirks found */
4891        if (triton1)
4892                pr_info("Host bridge needs ETBF enabled\n");
4893        if (vsfx)
4894                pr_info("Host bridge needs VSFX enabled\n");
4895        if (pcipci_fail) {
4896                pr_info("bttv and your chipset may not work together\n");
4897                if (!no_overlay) {
4898                        pr_info("overlay will be disabled\n");
4899                        no_overlay = 1;
4900                } else {
4901                        pr_info("overlay forced. Use this option at your own risk.\n");
4902                }
4903        }
4904        if (UNSET != latency)
4905                pr_info("pci latency fixup [%d]\n", latency);
4906        while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4907                                      PCI_DEVICE_ID_INTEL_82441, dev))) {
4908                unsigned char b;
4909                pci_read_config_byte(dev, 0x53, &b);
4910                if (bttv_debug)
4911                        pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4912                                b);
4913        }
4914}
4915
4916int bttv_handle_chipset(struct bttv *btv)
4917{
4918        unsigned char command;
4919
4920        if (!triton1 && !vsfx && UNSET == latency)
4921                return 0;
4922
4923        if (bttv_verbose) {
4924                if (triton1)
4925                        pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4926                                btv->c.nr);
4927                if (vsfx && btv->id >= 878)
4928                        pr_info("%d: enabling VSFX\n", btv->c.nr);
4929                if (UNSET != latency)
4930                        pr_info("%d: setting pci timer to %d\n",
4931                                btv->c.nr, latency);
4932        }
4933
4934        if (btv->id < 878) {
4935                /* bt848 (mis)uses a bit in the irq mask for etbf */
4936                if (triton1)
4937                        btv->triton1 = BT848_INT_ETBF;
4938        } else {
4939                /* bt878 has a bit in the pci config space for it */
4940                pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4941                if (triton1)
4942                        command |= BT878_EN_TBFX;
4943                if (vsfx)
4944                        command |= BT878_EN_VSFX;
4945                pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4946        }
4947        if (UNSET != latency)
4948                pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4949        return 0;
4950}
4951