linux/drivers/net/ethernet/8390/pcnet_cs.c
<<
>>
Prefs
   1/*======================================================================
   2
   3    A PCMCIA ethernet driver for NS8390-based cards
   4
   5    This driver supports the D-Link DE-650 and Linksys EthernetCard
   6    cards, the newer D-Link and Linksys combo cards, Accton EN2212
   7    cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
   8    mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
   9    Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
  10    mode.  It will also handle the Socket EA card in either mode.
  11
  12    Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
  13
  14    pcnet_cs.c 1.153 2003/11/09 18:53:09
  15
  16    The network driver code is based on Donald Becker's NE2000 code:
  17
  18    Written 1992,1993 by Donald Becker.
  19    Copyright 1993 United States Government as represented by the
  20    Director, National Security Agency.  This software may be used and
  21    distributed according to the terms of the GNU General Public License,
  22    incorporated herein by reference.
  23    Donald Becker may be reached at becker@scyld.com
  24
  25    Based also on Keith Moore's changes to Don Becker's code, for IBM
  26    CCAE support.  Drivers merged back together, and shared-memory
  27    Socket EA support added, by Ken Raeburn, September 1995.
  28
  29======================================================================*/
  30
  31#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  32
  33#include <linux/kernel.h>
  34#include <linux/module.h>
  35#include <linux/ptrace.h>
  36#include <linux/string.h>
  37#include <linux/timer.h>
  38#include <linux/delay.h>
  39#include <linux/netdevice.h>
  40#include <linux/log2.h>
  41#include <linux/etherdevice.h>
  42#include <linux/mii.h>
  43#include "8390.h"
  44
  45#include <pcmcia/cistpl.h>
  46#include <pcmcia/ciscode.h>
  47#include <pcmcia/ds.h>
  48#include <pcmcia/cisreg.h>
  49
  50#include <asm/io.h>
  51#include <asm/byteorder.h>
  52#include <linux/uaccess.h>
  53
  54#define PCNET_CMD       0x00
  55#define PCNET_DATAPORT  0x10    /* NatSemi-defined port window offset. */
  56#define PCNET_RESET     0x1f    /* Issue a read to reset, a write to clear. */
  57#define PCNET_MISC      0x18    /* For IBM CCAE and Socket EA cards */
  58
  59#define PCNET_START_PG  0x40    /* First page of TX buffer */
  60#define PCNET_STOP_PG   0x80    /* Last page +1 of RX ring */
  61
  62/* Socket EA cards have a larger packet buffer */
  63#define SOCKET_START_PG 0x01
  64#define SOCKET_STOP_PG  0xff
  65
  66#define PCNET_RDC_TIMEOUT (2*HZ/100)    /* Max wait in jiffies for Tx RDC */
  67
  68static const char *if_names[] = { "auto", "10baseT", "10base2"};
  69static u32 pcnet_msg_enable;
  70
  71/*====================================================================*/
  72
  73/* Module parameters */
  74
  75MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
  76MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver");
  77MODULE_LICENSE("GPL");
  78
  79#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  80
  81INT_MODULE_PARM(if_port,        1);     /* Transceiver type */
  82INT_MODULE_PARM(use_big_buf,    1);     /* use 64K packet buffer? */
  83INT_MODULE_PARM(mem_speed,      0);     /* shared mem speed, in ns */
  84INT_MODULE_PARM(delay_output,   0);     /* pause after xmit? */
  85INT_MODULE_PARM(delay_time,     4);     /* in usec */
  86INT_MODULE_PARM(use_shmem,      -1);    /* use shared memory? */
  87INT_MODULE_PARM(full_duplex,    0);     /* full duplex? */
  88
  89/* Ugh!  Let the user hardwire the hardware address for queer cards */
  90static int hw_addr[6] = { 0, /* ... */ };
  91module_param_array(hw_addr, int, NULL, 0);
  92
  93/*====================================================================*/
  94
  95static void mii_phy_probe(struct net_device *dev);
  96static int pcnet_config(struct pcmcia_device *link);
  97static void pcnet_release(struct pcmcia_device *link);
  98static int pcnet_open(struct net_device *dev);
  99static int pcnet_close(struct net_device *dev);
 100static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 101static irqreturn_t ei_irq_wrapper(int irq, void *dev_id);
 102static void ei_watchdog(u_long arg);
 103static void pcnet_reset_8390(struct net_device *dev);
 104static int set_config(struct net_device *dev, struct ifmap *map);
 105static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
 106                              int stop_pg, int cm_offset);
 107static int setup_dma_config(struct pcmcia_device *link, int start_pg,
 108                            int stop_pg);
 109
 110static void pcnet_detach(struct pcmcia_device *p_dev);
 111
 112/*====================================================================*/
 113
 114struct hw_info {
 115    u_int       offset;
 116    u_char      a0, a1, a2;
 117    u_int       flags;
 118};
 119
 120#define DELAY_OUTPUT    0x01
 121#define HAS_MISC_REG    0x02
 122#define USE_BIG_BUF     0x04
 123#define HAS_IBM_MISC    0x08
 124#define IS_DL10019      0x10
 125#define IS_DL10022      0x20
 126#define HAS_MII         0x40
 127#define USE_SHMEM       0x80    /* autodetected */
 128
 129#define AM79C9XX_HOME_PHY       0x00006B90  /* HomePNA PHY */
 130#define AM79C9XX_ETH_PHY        0x00006B70  /* 10baseT PHY */
 131#define MII_PHYID_REV_MASK      0xfffffff0
 132#define MII_PHYID_REG1          0x02
 133#define MII_PHYID_REG2          0x03
 134
 135static struct hw_info hw_info[] = {
 136    { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
 137    { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
 138    { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
 139    { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
 140      DELAY_OUTPUT | HAS_IBM_MISC },
 141    { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
 142    { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
 143    { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
 144    { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
 145    { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
 146    { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
 147    { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
 148      HAS_MISC_REG | HAS_IBM_MISC },
 149    { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
 150    { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
 151    { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
 152      HAS_MISC_REG | HAS_IBM_MISC },
 153    { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
 154      HAS_MISC_REG | HAS_IBM_MISC },
 155    { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
 156      HAS_MISC_REG | HAS_IBM_MISC },
 157    { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
 158      HAS_MISC_REG | HAS_IBM_MISC },
 159    { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
 160      HAS_MISC_REG | HAS_IBM_MISC },
 161    { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
 162      HAS_MISC_REG | HAS_IBM_MISC },
 163    { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
 164      HAS_MISC_REG | HAS_IBM_MISC },
 165    { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
 166      HAS_MISC_REG | HAS_IBM_MISC },
 167    { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
 168      HAS_MISC_REG | HAS_IBM_MISC },
 169    { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
 170      HAS_MISC_REG | HAS_IBM_MISC },
 171    { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
 172    { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
 173    { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
 174      HAS_MISC_REG | HAS_IBM_MISC },
 175    { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
 176      HAS_MISC_REG | HAS_IBM_MISC },
 177    { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
 178    { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
 179    { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
 180    { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
 181    { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
 182      HAS_MISC_REG | HAS_IBM_MISC },
 183    { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
 184      HAS_MISC_REG | HAS_IBM_MISC },
 185    { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
 186    { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
 187    { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
 188    { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
 189      DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
 190    { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
 191    { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
 192    { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
 193    { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
 194    { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
 195};
 196
 197#define NR_INFO         ARRAY_SIZE(hw_info)
 198
 199static struct hw_info default_info = { 0, 0, 0, 0, 0 };
 200static struct hw_info dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII };
 201static struct hw_info dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII };
 202
 203struct pcnet_dev {
 204        struct pcmcia_device    *p_dev;
 205    u_int               flags;
 206    void                __iomem *base;
 207    struct timer_list   watchdog;
 208    int                 stale, fast_poll;
 209    u_char              phy_id;
 210    u_char              eth_phy, pna_phy;
 211    u_short             link_status;
 212    u_long              mii_reset;
 213};
 214
 215static inline struct pcnet_dev *PRIV(struct net_device *dev)
 216{
 217        char *p = netdev_priv(dev);
 218        return (struct pcnet_dev *)(p + sizeof(struct ei_device));
 219}
 220
 221static const struct net_device_ops pcnet_netdev_ops = {
 222        .ndo_open               = pcnet_open,
 223        .ndo_stop               = pcnet_close,
 224        .ndo_set_config         = set_config,
 225        .ndo_start_xmit         = ei_start_xmit,
 226        .ndo_get_stats          = ei_get_stats,
 227        .ndo_do_ioctl           = ei_ioctl,
 228        .ndo_set_rx_mode        = ei_set_multicast_list,
 229        .ndo_tx_timeout         = ei_tx_timeout,
 230        .ndo_set_mac_address    = eth_mac_addr,
 231        .ndo_validate_addr      = eth_validate_addr,
 232#ifdef CONFIG_NET_POLL_CONTROLLER
 233        .ndo_poll_controller    = ei_poll,
 234#endif
 235};
 236
 237static int pcnet_probe(struct pcmcia_device *link)
 238{
 239    struct pcnet_dev *info;
 240    struct net_device *dev;
 241
 242    dev_dbg(&link->dev, "pcnet_attach()\n");
 243
 244    /* Create new ethernet device */
 245    dev = __alloc_ei_netdev(sizeof(struct pcnet_dev));
 246    if (!dev) return -ENOMEM;
 247    info = PRIV(dev);
 248    info->p_dev = link;
 249    link->priv = dev;
 250
 251    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 252
 253    dev->netdev_ops = &pcnet_netdev_ops;
 254
 255    return pcnet_config(link);
 256} /* pcnet_attach */
 257
 258static void pcnet_detach(struct pcmcia_device *link)
 259{
 260        struct net_device *dev = link->priv;
 261
 262        dev_dbg(&link->dev, "pcnet_detach\n");
 263
 264        unregister_netdev(dev);
 265
 266        pcnet_release(link);
 267
 268        free_netdev(dev);
 269} /* pcnet_detach */
 270
 271/*======================================================================
 272
 273    This probes for a card's hardware address, for card types that
 274    encode this information in their CIS.
 275
 276======================================================================*/
 277
 278static struct hw_info *get_hwinfo(struct pcmcia_device *link)
 279{
 280    struct net_device *dev = link->priv;
 281    u_char __iomem *base, *virt;
 282    int i, j;
 283
 284    /* Allocate a small memory window */
 285    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 286    link->resource[2]->start = 0; link->resource[2]->end = 0;
 287    i = pcmcia_request_window(link, link->resource[2], 0);
 288    if (i != 0)
 289        return NULL;
 290
 291    virt = ioremap(link->resource[2]->start,
 292            resource_size(link->resource[2]));
 293    for (i = 0; i < NR_INFO; i++) {
 294        pcmcia_map_mem_page(link, link->resource[2],
 295                hw_info[i].offset & ~(resource_size(link->resource[2])-1));
 296        base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)];
 297        if ((readb(base+0) == hw_info[i].a0) &&
 298            (readb(base+2) == hw_info[i].a1) &&
 299            (readb(base+4) == hw_info[i].a2)) {
 300                for (j = 0; j < 6; j++)
 301                    dev->dev_addr[j] = readb(base + (j<<1));
 302                break;
 303        }
 304    }
 305
 306    iounmap(virt);
 307    j = pcmcia_release_window(link, link->resource[2]);
 308    return (i < NR_INFO) ? hw_info+i : NULL;
 309} /* get_hwinfo */
 310
 311/*======================================================================
 312
 313    This probes for a card's hardware address by reading the PROM.
 314    It checks the address against a list of known types, then falls
 315    back to a simple NE2000 clone signature check.
 316
 317======================================================================*/
 318
 319static struct hw_info *get_prom(struct pcmcia_device *link)
 320{
 321    struct net_device *dev = link->priv;
 322    unsigned int ioaddr = dev->base_addr;
 323    u_char prom[32];
 324    int i, j;
 325
 326    /* This is lifted straight from drivers/net/ethernet/8390/ne.c */
 327    struct {
 328        u_char value, offset;
 329    } program_seq[] = {
 330        {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
 331        {0x48,  EN0_DCFG},      /* Set byte-wide (0x48) access. */
 332        {0x00,  EN0_RCNTLO},    /* Clear the count regs. */
 333        {0x00,  EN0_RCNTHI},
 334        {0x00,  EN0_IMR},       /* Mask completion irq. */
 335        {0xFF,  EN0_ISR},
 336        {E8390_RXOFF, EN0_RXCR},        /* 0x20  Set to monitor */
 337        {E8390_TXOFF, EN0_TXCR},        /* 0x02  and loopback mode. */
 338        {32,    EN0_RCNTLO},
 339        {0x00,  EN0_RCNTHI},
 340        {0x00,  EN0_RSARLO},    /* DMA starting at 0x0000. */
 341        {0x00,  EN0_RSARHI},
 342        {E8390_RREAD+E8390_START, E8390_CMD},
 343    };
 344
 345    pcnet_reset_8390(dev);
 346    mdelay(10);
 347
 348    for (i = 0; i < ARRAY_SIZE(program_seq); i++)
 349        outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
 350
 351    for (i = 0; i < 32; i++)
 352        prom[i] = inb(ioaddr + PCNET_DATAPORT);
 353    for (i = 0; i < NR_INFO; i++) {
 354        if ((prom[0] == hw_info[i].a0) &&
 355            (prom[2] == hw_info[i].a1) &&
 356            (prom[4] == hw_info[i].a2))
 357            break;
 358    }
 359    if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
 360        for (j = 0; j < 6; j++)
 361            dev->dev_addr[j] = prom[j<<1];
 362        return (i < NR_INFO) ? hw_info+i : &default_info;
 363    }
 364    return NULL;
 365} /* get_prom */
 366
 367/*======================================================================
 368
 369    For DL10019 based cards, like the Linksys EtherFast
 370
 371======================================================================*/
 372
 373static struct hw_info *get_dl10019(struct pcmcia_device *link)
 374{
 375    struct net_device *dev = link->priv;
 376    int i;
 377    u_char sum;
 378
 379    for (sum = 0, i = 0x14; i < 0x1c; i++)
 380        sum += inb_p(dev->base_addr + i);
 381    if (sum != 0xff)
 382        return NULL;
 383    for (i = 0; i < 6; i++)
 384        dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i);
 385    i = inb(dev->base_addr + 0x1f);
 386    return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info;
 387}
 388
 389/*======================================================================
 390
 391    For Asix AX88190 based cards
 392
 393======================================================================*/
 394
 395static struct hw_info *get_ax88190(struct pcmcia_device *link)
 396{
 397    struct net_device *dev = link->priv;
 398    unsigned int ioaddr = dev->base_addr;
 399    int i, j;
 400
 401    /* Not much of a test, but the alternatives are messy */
 402    if (link->config_base != 0x03c0)
 403        return NULL;
 404
 405    outb_p(0x01, ioaddr + EN0_DCFG);    /* Set word-wide access. */
 406    outb_p(0x00, ioaddr + EN0_RSARLO);  /* DMA starting at 0x0400. */
 407    outb_p(0x04, ioaddr + EN0_RSARHI);
 408    outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD);
 409
 410    for (i = 0; i < 6; i += 2) {
 411        j = inw(ioaddr + PCNET_DATAPORT);
 412        dev->dev_addr[i] = j & 0xff;
 413        dev->dev_addr[i+1] = j >> 8;
 414    }
 415    return NULL;
 416}
 417
 418/*======================================================================
 419
 420    This should be totally unnecessary... but when we can't figure
 421    out the hardware address any other way, we'll let the user hard
 422    wire it when the module is initialized.
 423
 424======================================================================*/
 425
 426static struct hw_info *get_hwired(struct pcmcia_device *link)
 427{
 428    struct net_device *dev = link->priv;
 429    int i;
 430
 431    for (i = 0; i < 6; i++)
 432        if (hw_addr[i] != 0) break;
 433    if (i == 6)
 434        return NULL;
 435
 436    for (i = 0; i < 6; i++)
 437        dev->dev_addr[i] = hw_addr[i];
 438
 439    return &default_info;
 440} /* get_hwired */
 441
 442static int try_io_port(struct pcmcia_device *link)
 443{
 444    int j, ret;
 445    link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 446    link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
 447    if (link->resource[0]->end == 32) {
 448        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 449        if (link->resource[1]->end > 0) {
 450            /* for master/slave multifunction cards */
 451            link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 452        }
 453    } else {
 454        /* This should be two 16-port windows */
 455        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 456        link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
 457    }
 458    if (link->resource[0]->start == 0) {
 459        for (j = 0; j < 0x400; j += 0x20) {
 460            link->resource[0]->start = j ^ 0x300;
 461            link->resource[1]->start = (j ^ 0x300) + 0x10;
 462            link->io_lines = 16;
 463            ret = pcmcia_request_io(link);
 464            if (ret == 0)
 465                    return ret;
 466        }
 467        return ret;
 468    } else {
 469        return pcmcia_request_io(link);
 470    }
 471}
 472
 473static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data)
 474{
 475        int *priv = priv_data;
 476        int try = (*priv & 0x1);
 477
 478        *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10;
 479
 480        if (p_dev->config_index == 0)
 481                return -EINVAL;
 482
 483        if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
 484                return -EINVAL;
 485
 486        if (try)
 487                p_dev->io_lines = 16;
 488        return try_io_port(p_dev);
 489}
 490
 491static struct hw_info *pcnet_try_config(struct pcmcia_device *link,
 492                                        int *has_shmem, int try)
 493{
 494        struct net_device *dev = link->priv;
 495        struct hw_info *local_hw_info;
 496        struct pcnet_dev *info = PRIV(dev);
 497        int priv = try;
 498        int ret;
 499
 500        ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
 501        if (ret) {
 502                dev_warn(&link->dev, "no useable port range found\n");
 503                return NULL;
 504        }
 505        *has_shmem = (priv & 0x10);
 506
 507        if (!link->irq)
 508                return NULL;
 509
 510        if (resource_size(link->resource[1]) == 8)
 511                link->config_flags |= CONF_ENABLE_SPKR;
 512
 513        if ((link->manf_id == MANFID_IBM) &&
 514            (link->card_id == PRODID_IBM_HOME_AND_AWAY))
 515                link->config_index |= 0x10;
 516
 517        ret = pcmcia_enable_device(link);
 518        if (ret)
 519                return NULL;
 520
 521        dev->irq = link->irq;
 522        dev->base_addr = link->resource[0]->start;
 523
 524        if (info->flags & HAS_MISC_REG) {
 525                if ((if_port == 1) || (if_port == 2))
 526                        dev->if_port = if_port;
 527                else
 528                        dev_notice(&link->dev, "invalid if_port requested\n");
 529        } else
 530                dev->if_port = 0;
 531
 532        if ((link->config_base == 0x03c0) &&
 533            (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
 534                dev_info(&link->dev,
 535                        "this is an AX88190 card - use axnet_cs instead.\n");
 536                return NULL;
 537        }
 538
 539        local_hw_info = get_hwinfo(link);
 540        if (!local_hw_info)
 541                local_hw_info = get_prom(link);
 542        if (!local_hw_info)
 543                local_hw_info = get_dl10019(link);
 544        if (!local_hw_info)
 545                local_hw_info = get_ax88190(link);
 546        if (!local_hw_info)
 547                local_hw_info = get_hwired(link);
 548
 549        return local_hw_info;
 550}
 551
 552static int pcnet_config(struct pcmcia_device *link)
 553{
 554    struct net_device *dev = link->priv;
 555    struct pcnet_dev *info = PRIV(dev);
 556    int start_pg, stop_pg, cm_offset;
 557    int has_shmem = 0;
 558    struct hw_info *local_hw_info;
 559    struct ei_device *ei_local;
 560
 561    dev_dbg(&link->dev, "pcnet_config\n");
 562
 563    local_hw_info = pcnet_try_config(link, &has_shmem, 0);
 564    if (!local_hw_info) {
 565            /* check whether forcing io_lines to 16 helps... */
 566            pcmcia_disable_device(link);
 567            local_hw_info = pcnet_try_config(link, &has_shmem, 1);
 568            if (local_hw_info == NULL) {
 569                    dev_notice(&link->dev, "unable to read hardware net"
 570                            " address for io base %#3lx\n", dev->base_addr);
 571                    goto failed;
 572            }
 573    }
 574
 575    info->flags = local_hw_info->flags;
 576    /* Check for user overrides */
 577    info->flags |= (delay_output) ? DELAY_OUTPUT : 0;
 578    if ((link->manf_id == MANFID_SOCKET) &&
 579        ((link->card_id == PRODID_SOCKET_LPE) ||
 580         (link->card_id == PRODID_SOCKET_LPE_CF) ||
 581         (link->card_id == PRODID_SOCKET_EIO)))
 582        info->flags &= ~USE_BIG_BUF;
 583    if (!use_big_buf)
 584        info->flags &= ~USE_BIG_BUF;
 585
 586    if (info->flags & USE_BIG_BUF) {
 587        start_pg = SOCKET_START_PG;
 588        stop_pg = SOCKET_STOP_PG;
 589        cm_offset = 0x10000;
 590    } else {
 591        start_pg = PCNET_START_PG;
 592        stop_pg = PCNET_STOP_PG;
 593        cm_offset = 0;
 594    }
 595
 596    /* has_shmem is ignored if use_shmem != -1 */
 597    if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) ||
 598        (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0))
 599        setup_dma_config(link, start_pg, stop_pg);
 600
 601    ei_status.name = "NE2000";
 602    ei_status.word16 = 1;
 603    ei_status.reset_8390 = pcnet_reset_8390;
 604
 605    if (info->flags & (IS_DL10019|IS_DL10022))
 606        mii_phy_probe(dev);
 607
 608    SET_NETDEV_DEV(dev, &link->dev);
 609    ei_local = netdev_priv(dev);
 610    ei_local->msg_enable = pcnet_msg_enable;
 611
 612    if (register_netdev(dev) != 0) {
 613        pr_notice("register_netdev() failed\n");
 614        goto failed;
 615    }
 616
 617    if (info->flags & (IS_DL10019|IS_DL10022)) {
 618        u_char id = inb(dev->base_addr + 0x1a);
 619        netdev_info(dev, "NE2000 (DL100%d rev %02x): ",
 620                    (info->flags & IS_DL10022) ? 22 : 19, id);
 621        if (info->pna_phy)
 622            pr_cont("PNA, ");
 623    } else {
 624        netdev_info(dev, "NE2000 Compatible: ");
 625    }
 626    pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq);
 627    if (info->flags & USE_SHMEM)
 628        pr_cont(" mem %#5lx,", dev->mem_start);
 629    if (info->flags & HAS_MISC_REG)
 630        pr_cont(" %s xcvr,", if_names[dev->if_port]);
 631    pr_cont(" hw_addr %pM\n", dev->dev_addr);
 632    return 0;
 633
 634failed:
 635    pcnet_release(link);
 636    return -ENODEV;
 637} /* pcnet_config */
 638
 639static void pcnet_release(struct pcmcia_device *link)
 640{
 641        struct pcnet_dev *info = PRIV(link->priv);
 642
 643        dev_dbg(&link->dev, "pcnet_release\n");
 644
 645        if (info->flags & USE_SHMEM)
 646                iounmap(info->base);
 647
 648        pcmcia_disable_device(link);
 649}
 650
 651static int pcnet_suspend(struct pcmcia_device *link)
 652{
 653        struct net_device *dev = link->priv;
 654
 655        if (link->open)
 656                netif_device_detach(dev);
 657
 658        return 0;
 659}
 660
 661static int pcnet_resume(struct pcmcia_device *link)
 662{
 663        struct net_device *dev = link->priv;
 664
 665        if (link->open) {
 666                pcnet_reset_8390(dev);
 667                NS8390_init(dev, 1);
 668                netif_device_attach(dev);
 669        }
 670
 671        return 0;
 672}
 673
 674
 675/*======================================================================
 676
 677    MII interface support for DL10019 and DL10022 based cards
 678
 679    On the DL10019, the MII IO direction bit is 0x10; on the DL10022
 680    it is 0x20.  Setting both bits seems to work on both card types.
 681
 682======================================================================*/
 683
 684#define DLINK_GPIO              0x1c
 685#define DLINK_DIAG              0x1d
 686#define DLINK_EEPROM            0x1e
 687
 688#define MDIO_SHIFT_CLK          0x80
 689#define MDIO_DATA_OUT           0x40
 690#define MDIO_DIR_WRITE          0x30
 691#define MDIO_DATA_WRITE0        (MDIO_DIR_WRITE)
 692#define MDIO_DATA_WRITE1        (MDIO_DIR_WRITE | MDIO_DATA_OUT)
 693#define MDIO_DATA_READ          0x10
 694#define MDIO_MASK               0x0f
 695
 696static void mdio_sync(unsigned int addr)
 697{
 698    int bits, mask = inb(addr) & MDIO_MASK;
 699    for (bits = 0; bits < 32; bits++) {
 700        outb(mask | MDIO_DATA_WRITE1, addr);
 701        outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
 702    }
 703}
 704
 705static int mdio_read(unsigned int addr, int phy_id, int loc)
 706{
 707    u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
 708    int i, retval = 0, mask = inb(addr) & MDIO_MASK;
 709
 710    mdio_sync(addr);
 711    for (i = 13; i >= 0; i--) {
 712        int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
 713        outb(mask | dat, addr);
 714        outb(mask | dat | MDIO_SHIFT_CLK, addr);
 715    }
 716    for (i = 19; i > 0; i--) {
 717        outb(mask, addr);
 718        retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
 719        outb(mask | MDIO_SHIFT_CLK, addr);
 720    }
 721    return (retval>>1) & 0xffff;
 722}
 723
 724static void mdio_write(unsigned int addr, int phy_id, int loc, int value)
 725{
 726    u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
 727    int i, mask = inb(addr) & MDIO_MASK;
 728
 729    mdio_sync(addr);
 730    for (i = 31; i >= 0; i--) {
 731        int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
 732        outb(mask | dat, addr);
 733        outb(mask | dat | MDIO_SHIFT_CLK, addr);
 734    }
 735    for (i = 1; i >= 0; i--) {
 736        outb(mask, addr);
 737        outb(mask | MDIO_SHIFT_CLK, addr);
 738    }
 739}
 740
 741/*======================================================================
 742
 743    EEPROM access routines for DL10019 and DL10022 based cards
 744
 745======================================================================*/
 746
 747#define EE_EEP          0x40
 748#define EE_ASIC         0x10
 749#define EE_CS           0x08
 750#define EE_CK           0x04
 751#define EE_DO           0x02
 752#define EE_DI           0x01
 753#define EE_ADOT         0x01    /* DataOut for ASIC */
 754#define EE_READ_CMD     0x06
 755
 756#define DL19FDUPLX      0x0400  /* DL10019 Full duplex mode */
 757
 758static int read_eeprom(unsigned int ioaddr, int location)
 759{
 760    int i, retval = 0;
 761    unsigned int ee_addr = ioaddr + DLINK_EEPROM;
 762    int read_cmd = location | (EE_READ_CMD << 8);
 763
 764    outb(0, ee_addr);
 765    outb(EE_EEP|EE_CS, ee_addr);
 766
 767    /* Shift the read command bits out. */
 768    for (i = 10; i >= 0; i--) {
 769        short dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
 770        outb_p(EE_EEP|EE_CS|dataval, ee_addr);
 771        outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr);
 772    }
 773    outb(EE_EEP|EE_CS, ee_addr);
 774
 775    for (i = 16; i > 0; i--) {
 776        outb_p(EE_EEP|EE_CS | EE_CK, ee_addr);
 777        retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0);
 778        outb_p(EE_EEP|EE_CS, ee_addr);
 779    }
 780
 781    /* Terminate the EEPROM access. */
 782    outb(0, ee_addr);
 783    return retval;
 784}
 785
 786/*
 787    The internal ASIC registers can be changed by EEPROM READ access
 788    with EE_ASIC bit set.
 789    In ASIC mode, EE_ADOT is used to output the data to the ASIC.
 790*/
 791
 792static void write_asic(unsigned int ioaddr, int location, short asic_data)
 793{
 794        int i;
 795        unsigned int ee_addr = ioaddr + DLINK_EEPROM;
 796        short dataval;
 797        int read_cmd = location | (EE_READ_CMD << 8);
 798
 799        asic_data |= read_eeprom(ioaddr, location);
 800
 801        outb(0, ee_addr);
 802        outb(EE_ASIC|EE_CS|EE_DI, ee_addr);
 803
 804        read_cmd = read_cmd >> 1;
 805
 806        /* Shift the read command bits out. */
 807        for (i = 9; i >= 0; i--) {
 808                dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
 809                outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
 810                outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr);
 811                outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
 812        }
 813        // sync
 814        outb(EE_ASIC|EE_CS, ee_addr);
 815        outb(EE_ASIC|EE_CS|EE_CK, ee_addr);
 816        outb(EE_ASIC|EE_CS, ee_addr);
 817
 818        for (i = 15; i >= 0; i--) {
 819                dataval = (asic_data & (1 << i)) ? EE_ADOT : 0;
 820                outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
 821                outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr);
 822                outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
 823        }
 824
 825        /* Terminate the ASIC access. */
 826        outb(EE_ASIC|EE_DI, ee_addr);
 827        outb(EE_ASIC|EE_DI| EE_CK, ee_addr);
 828        outb(EE_ASIC|EE_DI, ee_addr);
 829
 830        outb(0, ee_addr);
 831}
 832
 833/*====================================================================*/
 834
 835static void set_misc_reg(struct net_device *dev)
 836{
 837    unsigned int nic_base = dev->base_addr;
 838    struct pcnet_dev *info = PRIV(dev);
 839    u_char tmp;
 840
 841    if (info->flags & HAS_MISC_REG) {
 842        tmp = inb_p(nic_base + PCNET_MISC) & ~3;
 843        if (dev->if_port == 2)
 844            tmp |= 1;
 845        if (info->flags & USE_BIG_BUF)
 846            tmp |= 2;
 847        if (info->flags & HAS_IBM_MISC)
 848            tmp |= 8;
 849        outb_p(tmp, nic_base + PCNET_MISC);
 850    }
 851    if (info->flags & IS_DL10022) {
 852        if (info->flags & HAS_MII) {
 853            /* Advertise 100F, 100H, 10F, 10H */
 854            mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
 855            /* Restart MII autonegotiation */
 856            mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
 857            mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
 858            info->mii_reset = jiffies;
 859        } else {
 860            outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
 861        }
 862    } else if (info->flags & IS_DL10019) {
 863        /* Advertise 100F, 100H, 10F, 10H */
 864        mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
 865        /* Restart MII autonegotiation */
 866        mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
 867        mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
 868    }
 869}
 870
 871/*====================================================================*/
 872
 873static void mii_phy_probe(struct net_device *dev)
 874{
 875    struct pcnet_dev *info = PRIV(dev);
 876    unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
 877    int i;
 878    u_int tmp, phyid;
 879
 880    for (i = 31; i >= 0; i--) {
 881        tmp = mdio_read(mii_addr, i, 1);
 882        if ((tmp == 0) || (tmp == 0xffff))
 883            continue;
 884        tmp = mdio_read(mii_addr, i, MII_PHYID_REG1);
 885        phyid = tmp << 16;
 886        phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
 887        phyid &= MII_PHYID_REV_MASK;
 888        netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid);
 889        if (phyid == AM79C9XX_HOME_PHY) {
 890            info->pna_phy = i;
 891        } else if (phyid != AM79C9XX_ETH_PHY) {
 892            info->eth_phy = i;
 893        }
 894    }
 895}
 896
 897static int pcnet_open(struct net_device *dev)
 898{
 899    int ret;
 900    struct pcnet_dev *info = PRIV(dev);
 901    struct pcmcia_device *link = info->p_dev;
 902    unsigned int nic_base = dev->base_addr;
 903
 904    dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name);
 905
 906    if (!pcmcia_dev_present(link))
 907        return -ENODEV;
 908
 909    set_misc_reg(dev);
 910
 911    outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
 912    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev);
 913    if (ret)
 914            return ret;
 915
 916    link->open++;
 917
 918    info->phy_id = info->eth_phy;
 919    info->link_status = 0x00;
 920    setup_timer(&info->watchdog, ei_watchdog, (u_long)dev);
 921    mod_timer(&info->watchdog, jiffies + HZ);
 922
 923    return ei_open(dev);
 924} /* pcnet_open */
 925
 926/*====================================================================*/
 927
 928static int pcnet_close(struct net_device *dev)
 929{
 930    struct pcnet_dev *info = PRIV(dev);
 931    struct pcmcia_device *link = info->p_dev;
 932
 933    dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name);
 934
 935    ei_close(dev);
 936    free_irq(dev->irq, dev);
 937
 938    link->open--;
 939    netif_stop_queue(dev);
 940    del_timer_sync(&info->watchdog);
 941
 942    return 0;
 943} /* pcnet_close */
 944
 945/*======================================================================
 946
 947    Hard reset the card.  This used to pause for the same period that
 948    a 8390 reset command required, but that shouldn't be necessary.
 949
 950======================================================================*/
 951
 952static void pcnet_reset_8390(struct net_device *dev)
 953{
 954    unsigned int nic_base = dev->base_addr;
 955    int i;
 956
 957    ei_status.txing = ei_status.dmaing = 0;
 958
 959    outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD);
 960
 961    outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET);
 962
 963    for (i = 0; i < 100; i++) {
 964        if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0)
 965            break;
 966        udelay(100);
 967    }
 968    outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
 969
 970    if (i == 100)
 971        netdev_err(dev, "pcnet_reset_8390() did not complete.\n");
 972
 973    set_misc_reg(dev);
 974
 975} /* pcnet_reset_8390 */
 976
 977/*====================================================================*/
 978
 979static int set_config(struct net_device *dev, struct ifmap *map)
 980{
 981    struct pcnet_dev *info = PRIV(dev);
 982    if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
 983        if (!(info->flags & HAS_MISC_REG))
 984            return -EOPNOTSUPP;
 985        else if ((map->port < 1) || (map->port > 2))
 986            return -EINVAL;
 987        dev->if_port = map->port;
 988        netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
 989        NS8390_init(dev, 1);
 990    }
 991    return 0;
 992}
 993
 994/*====================================================================*/
 995
 996static irqreturn_t ei_irq_wrapper(int irq, void *dev_id)
 997{
 998    struct net_device *dev = dev_id;
 999    struct pcnet_dev *info;
1000    irqreturn_t ret = ei_interrupt(irq, dev_id);
1001
1002    if (ret == IRQ_HANDLED) {
1003            info = PRIV(dev);
1004            info->stale = 0;
1005    }
1006    return ret;
1007}
1008
1009static void ei_watchdog(u_long arg)
1010{
1011    struct net_device *dev = (struct net_device *)arg;
1012    struct pcnet_dev *info = PRIV(dev);
1013    unsigned int nic_base = dev->base_addr;
1014    unsigned int mii_addr = nic_base + DLINK_GPIO;
1015    u_short link;
1016
1017    if (!netif_device_present(dev)) goto reschedule;
1018
1019    /* Check for pending interrupt with expired latency timer: with
1020       this, we can limp along even if the interrupt is blocked */
1021    if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
1022        if (!info->fast_poll)
1023            netdev_info(dev, "interrupt(s) dropped!\n");
1024        ei_irq_wrapper(dev->irq, dev);
1025        info->fast_poll = HZ;
1026    }
1027    if (info->fast_poll) {
1028        info->fast_poll--;
1029        info->watchdog.expires = jiffies + 1;
1030        add_timer(&info->watchdog);
1031        return;
1032    }
1033
1034    if (!(info->flags & HAS_MII))
1035        goto reschedule;
1036
1037    mdio_read(mii_addr, info->phy_id, 1);
1038    link = mdio_read(mii_addr, info->phy_id, 1);
1039    if (!link || (link == 0xffff)) {
1040        if (info->eth_phy) {
1041            info->phy_id = info->eth_phy = 0;
1042        } else {
1043            netdev_info(dev, "MII is missing!\n");
1044            info->flags &= ~HAS_MII;
1045        }
1046        goto reschedule;
1047    }
1048
1049    link &= 0x0004;
1050    if (link != info->link_status) {
1051        u_short p = mdio_read(mii_addr, info->phy_id, 5);
1052        netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
1053        if (link && (info->flags & IS_DL10022)) {
1054            /* Disable collision detection on full duplex links */
1055            outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG);
1056        } else if (link && (info->flags & IS_DL10019)) {
1057            /* Disable collision detection on full duplex links */
1058            write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0);
1059        }
1060        if (link) {
1061            if (info->phy_id == info->eth_phy) {
1062                if (p)
1063                    netdev_info(dev, "autonegotiation complete: "
1064                                "%sbaseT-%cD selected\n",
1065                                ((p & 0x0180) ? "100" : "10"),
1066                                ((p & 0x0140) ? 'F' : 'H'));
1067                else
1068                    netdev_info(dev, "link partner did not autonegotiate\n");
1069            }
1070            NS8390_init(dev, 1);
1071        }
1072        info->link_status = link;
1073    }
1074    if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) {
1075        link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004;
1076        if (((info->phy_id == info->pna_phy) && link) ||
1077            ((info->phy_id != info->pna_phy) && !link)) {
1078            /* isolate this MII and try flipping to the other one */
1079            mdio_write(mii_addr, info->phy_id, 0, 0x0400);
1080            info->phy_id ^= info->pna_phy ^ info->eth_phy;
1081            netdev_info(dev, "switched to %s transceiver\n",
1082                        (info->phy_id == info->eth_phy) ? "ethernet" : "PNA");
1083            mdio_write(mii_addr, info->phy_id, 0,
1084                       (info->phy_id == info->eth_phy) ? 0x1000 : 0);
1085            info->link_status = 0;
1086            info->mii_reset = jiffies;
1087        }
1088    }
1089
1090reschedule:
1091    info->watchdog.expires = jiffies + HZ;
1092    add_timer(&info->watchdog);
1093}
1094
1095/*====================================================================*/
1096
1097
1098static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1099{
1100    struct pcnet_dev *info = PRIV(dev);
1101    struct mii_ioctl_data *data = if_mii(rq);
1102    unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
1103
1104    if (!(info->flags & (IS_DL10019|IS_DL10022)))
1105        return -EINVAL;
1106
1107    switch (cmd) {
1108    case SIOCGMIIPHY:
1109        data->phy_id = info->phy_id;
1110    case SIOCGMIIREG:           /* Read MII PHY register. */
1111        data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f);
1112        return 0;
1113    case SIOCSMIIREG:           /* Write MII PHY register. */
1114        mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in);
1115        return 0;
1116    }
1117    return -EOPNOTSUPP;
1118}
1119
1120/*====================================================================*/
1121
1122static void dma_get_8390_hdr(struct net_device *dev,
1123                             struct e8390_pkt_hdr *hdr,
1124                             int ring_page)
1125{
1126    unsigned int nic_base = dev->base_addr;
1127
1128    if (ei_status.dmaing) {
1129        netdev_err(dev, "DMAing conflict in dma_block_input."
1130                   "[DMAstat:%1x][irqlock:%1x]\n",
1131                   ei_status.dmaing, ei_status.irqlock);
1132        return;
1133    }
1134
1135    ei_status.dmaing |= 0x01;
1136    outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1137    outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
1138    outb_p(0, nic_base + EN0_RCNTHI);
1139    outb_p(0, nic_base + EN0_RSARLO);           /* On page boundary */
1140    outb_p(ring_page, nic_base + EN0_RSARHI);
1141    outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1142
1143    insw(nic_base + PCNET_DATAPORT, hdr,
1144            sizeof(struct e8390_pkt_hdr)>>1);
1145    /* Fix for big endian systems */
1146    hdr->count = le16_to_cpu(hdr->count);
1147
1148    outb_p(ENISR_RDC, nic_base + EN0_ISR);      /* Ack intr. */
1149    ei_status.dmaing &= ~0x01;
1150}
1151
1152/*====================================================================*/
1153
1154static void dma_block_input(struct net_device *dev, int count,
1155                            struct sk_buff *skb, int ring_offset)
1156{
1157    unsigned int nic_base = dev->base_addr;
1158    int xfer_count = count;
1159    char *buf = skb->data;
1160    struct ei_device *ei_local = netdev_priv(dev);
1161
1162    if ((netif_msg_rx_status(ei_local)) && (count != 4))
1163        netdev_dbg(dev, "[bi=%d]\n", count+4);
1164    if (ei_status.dmaing) {
1165        netdev_err(dev, "DMAing conflict in dma_block_input."
1166                   "[DMAstat:%1x][irqlock:%1x]\n",
1167                   ei_status.dmaing, ei_status.irqlock);
1168        return;
1169    }
1170    ei_status.dmaing |= 0x01;
1171    outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1172    outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1173    outb_p(count >> 8, nic_base + EN0_RCNTHI);
1174    outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
1175    outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
1176    outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1177
1178    insw(nic_base + PCNET_DATAPORT,buf,count>>1);
1179    if (count & 0x01)
1180        buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
1181
1182    /* This was for the ALPHA version only, but enough people have been
1183       encountering problems that it is still here. */
1184#ifdef PCMCIA_DEBUG
1185      /* DMA termination address check... */
1186    if (netif_msg_rx_status(ei_local)) {
1187        int addr, tries = 20;
1188        do {
1189            /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
1190               -- it's broken for Rx on some cards! */
1191            int high = inb_p(nic_base + EN0_RSARHI);
1192            int low = inb_p(nic_base + EN0_RSARLO);
1193            addr = (high << 8) + low;
1194            if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff))
1195                break;
1196        } while (--tries > 0);
1197        if (tries <= 0)
1198            netdev_notice(dev, "RX transfer address mismatch,"
1199                          "%#4.4x (expected) vs. %#4.4x (actual).\n",
1200                          ring_offset + xfer_count, addr);
1201    }
1202#endif
1203    outb_p(ENISR_RDC, nic_base + EN0_ISR);      /* Ack intr. */
1204    ei_status.dmaing &= ~0x01;
1205} /* dma_block_input */
1206
1207/*====================================================================*/
1208
1209static void dma_block_output(struct net_device *dev, int count,
1210                             const u_char *buf, const int start_page)
1211{
1212    unsigned int nic_base = dev->base_addr;
1213    struct pcnet_dev *info = PRIV(dev);
1214#ifdef PCMCIA_DEBUG
1215    int retries = 0;
1216    struct ei_device *ei_local = netdev_priv(dev);
1217#endif
1218    u_long dma_start;
1219
1220#ifdef PCMCIA_DEBUG
1221    netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count);
1222#endif
1223
1224    /* Round the count up for word writes.  Do we need to do this?
1225       What effect will an odd byte count have on the 8390?
1226       I should check someday. */
1227    if (count & 0x01)
1228        count++;
1229    if (ei_status.dmaing) {
1230        netdev_err(dev, "DMAing conflict in dma_block_output."
1231                   "[DMAstat:%1x][irqlock:%1x]\n",
1232                   ei_status.dmaing, ei_status.irqlock);
1233        return;
1234    }
1235    ei_status.dmaing |= 0x01;
1236    /* We should already be in page 0, but to be safe... */
1237    outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD);
1238
1239#ifdef PCMCIA_DEBUG
1240  retry:
1241#endif
1242
1243    outb_p(ENISR_RDC, nic_base + EN0_ISR);
1244
1245    /* Now the normal output. */
1246    outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1247    outb_p(count >> 8,   nic_base + EN0_RCNTHI);
1248    outb_p(0x00, nic_base + EN0_RSARLO);
1249    outb_p(start_page, nic_base + EN0_RSARHI);
1250
1251    outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD);
1252    outsw(nic_base + PCNET_DATAPORT, buf, count>>1);
1253
1254    dma_start = jiffies;
1255
1256#ifdef PCMCIA_DEBUG
1257    /* This was for the ALPHA version only, but enough people have been
1258       encountering problems that it is still here. */
1259    /* DMA termination address check... */
1260    if (netif_msg_tx_queued(ei_local)) {
1261        int addr, tries = 20;
1262        do {
1263            int high = inb_p(nic_base + EN0_RSARHI);
1264            int low = inb_p(nic_base + EN0_RSARLO);
1265            addr = (high << 8) + low;
1266            if ((start_page << 8) + count == addr)
1267                break;
1268        } while (--tries > 0);
1269        if (tries <= 0) {
1270            netdev_notice(dev, "Tx packet transfer address mismatch,"
1271                          "%#4.4x (expected) vs. %#4.4x (actual).\n",
1272                          (start_page << 8) + count, addr);
1273            if (retries++ == 0)
1274                goto retry;
1275        }
1276    }
1277#endif
1278
1279    while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
1280        if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) {
1281                netdev_warn(dev, "timeout waiting for Tx RDC.\n");
1282                pcnet_reset_8390(dev);
1283                NS8390_init(dev, 1);
1284                break;
1285        }
1286
1287    outb_p(ENISR_RDC, nic_base + EN0_ISR);      /* Ack intr. */
1288    if (info->flags & DELAY_OUTPUT)
1289        udelay((long)delay_time);
1290    ei_status.dmaing &= ~0x01;
1291}
1292
1293/*====================================================================*/
1294
1295static int setup_dma_config(struct pcmcia_device *link, int start_pg,
1296                            int stop_pg)
1297{
1298    struct net_device *dev = link->priv;
1299
1300    ei_status.tx_start_page = start_pg;
1301    ei_status.rx_start_page = start_pg + TX_PAGES;
1302    ei_status.stop_page = stop_pg;
1303
1304    /* set up block i/o functions */
1305    ei_status.get_8390_hdr = dma_get_8390_hdr;
1306    ei_status.block_input = dma_block_input;
1307    ei_status.block_output = dma_block_output;
1308
1309    return 0;
1310}
1311
1312/*====================================================================*/
1313
1314static void copyin(void *dest, void __iomem *src, int c)
1315{
1316    u_short *d = dest;
1317    u_short __iomem *s = src;
1318    int odd;
1319
1320    if (c <= 0)
1321        return;
1322    odd = (c & 1); c >>= 1;
1323
1324    if (c) {
1325        do { *d++ = __raw_readw(s++); } while (--c);
1326    }
1327    /* get last byte by fetching a word and masking */
1328    if (odd)
1329        *((u_char *)d) = readw(s) & 0xff;
1330}
1331
1332static void copyout(void __iomem *dest, const void *src, int c)
1333{
1334    u_short __iomem *d = dest;
1335    const u_short *s = src;
1336    int odd;
1337
1338    if (c <= 0)
1339        return;
1340    odd = (c & 1); c >>= 1;
1341
1342    if (c) {
1343        do { __raw_writew(*s++, d++); } while (--c);
1344    }
1345    /* copy last byte doing a read-modify-write */
1346    if (odd)
1347        writew((readw(d) & 0xff00) | *(u_char *)s, d);
1348}
1349
1350/*====================================================================*/
1351
1352static void shmem_get_8390_hdr(struct net_device *dev,
1353                               struct e8390_pkt_hdr *hdr,
1354                               int ring_page)
1355{
1356    void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8)
1357                                + (ring_page << 8)
1358                                - (ei_status.rx_start_page << 8);
1359
1360    copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr));
1361    /* Fix for big endian systems */
1362    hdr->count = le16_to_cpu(hdr->count);
1363}
1364
1365/*====================================================================*/
1366
1367static void shmem_block_input(struct net_device *dev, int count,
1368                              struct sk_buff *skb, int ring_offset)
1369{
1370    void __iomem *base = ei_status.mem;
1371    unsigned long offset = (TX_PAGES<<8) + ring_offset
1372                                - (ei_status.rx_start_page << 8);
1373    char *buf = skb->data;
1374
1375    if (offset + count > ei_status.priv) {
1376        /* We must wrap the input move. */
1377        int semi_count = ei_status.priv - offset;
1378        copyin(buf, base + offset, semi_count);
1379        buf += semi_count;
1380        offset = TX_PAGES<<8;
1381        count -= semi_count;
1382    }
1383    copyin(buf, base + offset, count);
1384}
1385
1386/*====================================================================*/
1387
1388static void shmem_block_output(struct net_device *dev, int count,
1389                               const u_char *buf, const int start_page)
1390{
1391    void __iomem *shmem = ei_status.mem + (start_page << 8);
1392    shmem -= ei_status.tx_start_page << 8;
1393    copyout(shmem, buf, count);
1394}
1395
1396/*====================================================================*/
1397
1398static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
1399                              int stop_pg, int cm_offset)
1400{
1401    struct net_device *dev = link->priv;
1402    struct pcnet_dev *info = PRIV(dev);
1403    int i, window_size, offset, ret;
1404
1405    window_size = (stop_pg - start_pg) << 8;
1406    if (window_size > 32 * 1024)
1407        window_size = 32 * 1024;
1408
1409    /* Make sure it's a power of two.  */
1410    window_size = roundup_pow_of_two(window_size);
1411
1412    /* Allocate a memory window */
1413    link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
1414    link->resource[3]->flags |= WIN_USE_WAIT;
1415    link->resource[3]->start = 0; link->resource[3]->end = window_size;
1416    ret = pcmcia_request_window(link, link->resource[3], mem_speed);
1417    if (ret)
1418            goto failed;
1419
1420    offset = (start_pg << 8) + cm_offset;
1421    offset -= offset % window_size;
1422    ret = pcmcia_map_mem_page(link, link->resource[3], offset);
1423    if (ret)
1424            goto failed;
1425
1426    /* Try scribbling on the buffer */
1427    info->base = ioremap(link->resource[3]->start,
1428                        resource_size(link->resource[3]));
1429    for (i = 0; i < (TX_PAGES<<8); i += 2)
1430        __raw_writew((i>>1), info->base+offset+i);
1431    udelay(100);
1432    for (i = 0; i < (TX_PAGES<<8); i += 2)
1433        if (__raw_readw(info->base+offset+i) != (i>>1)) break;
1434    pcnet_reset_8390(dev);
1435    if (i != (TX_PAGES<<8)) {
1436        iounmap(info->base);
1437        pcmcia_release_window(link, link->resource[3]);
1438        info->base = NULL;
1439        goto failed;
1440    }
1441
1442    ei_status.mem = info->base + offset;
1443    ei_status.priv = resource_size(link->resource[3]);
1444    dev->mem_start = (u_long)ei_status.mem;
1445    dev->mem_end = dev->mem_start + resource_size(link->resource[3]);
1446
1447    ei_status.tx_start_page = start_pg;
1448    ei_status.rx_start_page = start_pg + TX_PAGES;
1449    ei_status.stop_page = start_pg + (
1450            (resource_size(link->resource[3]) - offset) >> 8);
1451
1452    /* set up block i/o functions */
1453    ei_status.get_8390_hdr = shmem_get_8390_hdr;
1454    ei_status.block_input = shmem_block_input;
1455    ei_status.block_output = shmem_block_output;
1456
1457    info->flags |= USE_SHMEM;
1458    return 0;
1459
1460failed:
1461    return 1;
1462}
1463
1464/*====================================================================*/
1465
1466static const struct pcmcia_device_id pcnet_ids[] = {
1467        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021),
1468        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a),
1469        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15),
1470        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341),
1471        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
1472        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
1473        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
1474        PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
1475        PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
1476        PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
1477        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
1478        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
1479        PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
1480        PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
1481        PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1482        PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
1483        PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card       ", 0xb569a6e5, 0x5bd4ff2c),
1484        PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
1485        PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
1486        PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
1487        PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
1488        PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004),
1489        PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d),
1490        PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075),
1491        PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
1492        PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
1493        PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
1494        PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
1495        PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
1496        PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
1497        PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
1498        PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
1499        PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
1500        PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
1501        PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
1502        PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
1503        PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0009),
1504        PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
1505        PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
1506        PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
1507        PCMCIA_DEVICE_PROD_ID123("CNet  ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
1508        PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
1509        PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0),
1510        PCMCIA_DEVICE_PROD_ID123("EFA   ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b),
1511        PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b),
1512        PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b),
1513        PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0),
1514        PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82),
1515        PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8),
1516        PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab),
1517        PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
1518        PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
1519        PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
1520        PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
1521        PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
1522        PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
1523        PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96),
1524        PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224),
1525        PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb),
1526        PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247),
1527        PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96),
1528        PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1),
1529        PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd),
1530        PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190),
1531        PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504),
1532        PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a),
1533        PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79),
1534        PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7),
1535        PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a),
1536        PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9),
1537        PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
1538        PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
1539        PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a),
1540        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b),
1541        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
1542        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
1543        PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
1544        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
1545        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
1546        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
1547        PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
1548        PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
1549        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88),
1550        PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04),
1551        PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d),
1552        PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814),
1553        PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0),
1554        PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf),
1555        PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995),
1556        PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233),
1557        PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
1558        PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
1559        PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
1560        PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
1561        PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
1562        PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
1563        PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
1564        PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1),
1565        PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1),
1566        PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb),
1567        PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11),
1568        PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6),
1569        PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c),
1570        PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e),
1571        PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61),
1572        PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517),
1573        PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e),
1574        PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb),
1575        PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327),
1576        PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
1577        PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
1578        PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
1579        PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
1580        PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
1581        PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
1582        PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
1583        PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616),
1584        PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64),
1585        PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5),
1586        PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3),
1587        PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2),
1588        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c),
1589        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40),
1590        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7),
1591        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab),
1592        PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97),
1593        PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78),
1594        PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11),
1595        PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
1596        PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
1597        PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
1598        PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
1599        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
1600        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
1601        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
1602        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c),
1603        PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
1604        PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
1605        PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307),
1606        PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4),
1607        PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8),
1608        PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3),
1609        PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c),
1610        PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6),
1611        PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472),
1612        PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7),
1613        PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9),
1614        PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
1615        PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
1616        PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
1617        PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
1618        PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
1619        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
1620        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941),
1621        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b),
1622        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8),
1623        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0),
1624        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c),
1625        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8),
1626        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb),
1627        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4),
1628        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7),
1629        PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941),
1630        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641),
1631        PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1632        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b),
1633        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "    Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1),
1634        PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80),
1635        PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
1636        PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
1637        PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
1638        PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
1639        PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
1640        PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
1641        PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
1642        PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388),
1643        PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c),
1644        PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941),
1645        PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265),
1646        PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e),
1647        PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8),
1648        PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa),
1649        PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f),
1650        PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a),
1651        PCMCIA_DEVICE_PROD_ID13("Hypertec",  "EP401", 0x8787bec7, 0xf6e4a31e),
1652        PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0),
1653        PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e),
1654        PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89),
1655        PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
1656        PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
1657        PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
1658        PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
1659        PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
1660        /* too generic! */
1661        /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */
1662        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
1663        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
1664        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
1665        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
1666        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
1667        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
1668        PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
1669        PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
1670        PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
1671        PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"),
1672        PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"),
1673        PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
1674        PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
1675        PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
1676        PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
1677        PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
1678                0xb4be14e3, 0x43ac239b, 0x0877b627),
1679        PCMCIA_DEVICE_NULL
1680};
1681MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
1682MODULE_FIRMWARE("cis/PCMLM28.cis");
1683MODULE_FIRMWARE("cis/DP83903.cis");
1684MODULE_FIRMWARE("cis/LA-PCM.cis");
1685MODULE_FIRMWARE("cis/PE520.cis");
1686MODULE_FIRMWARE("cis/NE2K.cis");
1687MODULE_FIRMWARE("cis/PE-200.cis");
1688MODULE_FIRMWARE("cis/tamarack.cis");
1689
1690static struct pcmcia_driver pcnet_driver = {
1691        .name           = "pcnet_cs",
1692        .probe          = pcnet_probe,
1693        .remove         = pcnet_detach,
1694        .owner          = THIS_MODULE,
1695        .id_table       = pcnet_ids,
1696        .suspend        = pcnet_suspend,
1697        .resume         = pcnet_resume,
1698};
1699module_pcmcia_driver(pcnet_driver);
1700