/*
        Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
        Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
        Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
        Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
        Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
        Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
        Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
        Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
        Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
        <http://rt2x00.serialmonkey.com>

        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation; either version 2 of the License, or
        (at your option) any later version.

        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
        GNU General Public License for more details.

        You should have received a copy of the GNU General Public License
        along with this program; if not, see <http://www.gnu.org/licenses/>.
 */

/*
        Module: rt2800
        Abstract: Data structures and registers for the rt2800 modules.
        Supported chipsets: RT2800E, RT2800ED & RT2800U.
 */

#ifndef RT2800_H
#define RT2800_H

/*
 * RF chip defines.
 *
 * RF2820 2.4G 2T3R
 * RF2850 2.4G/5G 2T3R
 * RF2720 2.4G 1T2R
 * RF2750 2.4G/5G 1T2R
 * RF3020 2.4G 1T1R
 * RF2020 2.4G B/G
 * RF3021 2.4G 1T2R
 * RF3022 2.4G 2T2R
 * RF3052 2.4G/5G 2T2R
 * RF2853 2.4G/5G 3T3R
 * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
 * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
 * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
 * RF5592 2.4G/5G 2T2R
 * RF3070 2.4G 1T1R
 * RF5360 2.4G 1T1R
 * RF5362 2.4G 1T1R
 * RF5370 2.4G 1T1R
 * RF5390 2.4G 1T1R
 */
#define RF2820                          0x0001
#define RF2850                          0x0002
#define RF2720                          0x0003
#define RF2750                          0x0004
#define RF3020                          0x0005
#define RF2020                          0x0006
#define RF3021                          0x0007
#define RF3022                          0x0008
#define RF3052                          0x0009
#define RF2853                          0x000a
#define RF3320                          0x000b
#define RF3322                          0x000c
#define RF3053                          0x000d
#define RF5592                          0x000f
#define RF3070                          0x3070
#define RF3290                          0x3290
#define RF5350                          0x5350
#define RF5360                          0x5360
#define RF5362                          0x5362
#define RF5370                          0x5370
#define RF5372                          0x5372
#define RF5390                          0x5390
#define RF5392                          0x5392
#define RF7620                          0x7620

/*
 * Chipset revisions.
 */
#define REV_RT2860C                     0x0100
#define REV_RT2860D                     0x0101
#define REV_RT2872E                     0x0200
#define REV_RT3070E                     0x0200
#define REV_RT3070F                     0x0201
#define REV_RT3071E                     0x0211
#define REV_RT3090E                     0x0211
#define REV_RT3390E                     0x0211
#define REV_RT3593E                     0x0211
#define REV_RT5390F                     0x0502
#define REV_RT5390R                     0x1502
#define REV_RT5592C                     0x0221

#define DEFAULT_RSSI_OFFSET             120

/*
 * Register layout information.
 */
#define CSR_REG_BASE                    0x1000
#define CSR_REG_SIZE                    0x0800
#define EEPROM_BASE                     0x0000
#define EEPROM_SIZE                     0x0200
#define BBP_BASE                        0x0000
#define BBP_SIZE                        0x00ff
#define RF_BASE                         0x0004
#define RF_SIZE                         0x0010
#define RFCSR_BASE                      0x0000
#define RFCSR_SIZE                      0x0040

/*
 * Number of TX queues.
 */
#define NUM_TX_QUEUES                   4

/*
 * Registers.
 */


/*
 * MAC_CSR0_3290: MAC_CSR0 for RT3290 to identity MAC version number.
 */
#define MAC_CSR0_3290                   0x0000

/*
 * E2PROM_CSR: PCI EEPROM control register.
 * RELOAD: Write 1 to reload eeprom content.
 * TYPE: 0: 93c46, 1:93c66.
 * LOAD_STATUS: 1:loading, 0:done.
 */
#define E2PROM_CSR                      0x0004
#define E2PROM_CSR_DATA_CLOCK           FIELD32(0x00000001)
#define E2PROM_CSR_CHIP_SELECT          FIELD32(0x00000002)
#define E2PROM_CSR_DATA_IN              FIELD32(0x00000004)
#define E2PROM_CSR_DATA_OUT             FIELD32(0x00000008)
#define E2PROM_CSR_TYPE                 FIELD32(0x00000030)
#define E2PROM_CSR_LOAD_STATUS          FIELD32(0x00000040)
#define E2PROM_CSR_RELOAD               FIELD32(0x00000080)

/*
 * CMB_CTRL_CFG
 */
#define CMB_CTRL                0x0020
#define AUX_OPT_BIT0            FIELD32(0x00000001)
#define AUX_OPT_BIT1            FIELD32(0x00000002)
#define AUX_OPT_BIT2            FIELD32(0x00000004)
#define AUX_OPT_BIT3            FIELD32(0x00000008)
#define AUX_OPT_BIT4            FIELD32(0x00000010)
#define AUX_OPT_BIT5            FIELD32(0x00000020)
#define AUX_OPT_BIT6            FIELD32(0x00000040)
#define AUX_OPT_BIT7            FIELD32(0x00000080)
#define AUX_OPT_BIT8            FIELD32(0x00000100)
#define AUX_OPT_BIT9            FIELD32(0x00000200)
#define AUX_OPT_BIT10           FIELD32(0x00000400)
#define AUX_OPT_BIT11           FIELD32(0x00000800)
#define AUX_OPT_BIT12           FIELD32(0x00001000)
#define AUX_OPT_BIT13           FIELD32(0x00002000)
#define AUX_OPT_BIT14           FIELD32(0x00004000)
#define AUX_OPT_BIT15           FIELD32(0x00008000)
#define LDO25_LEVEL             FIELD32(0x00030000)
#define LDO25_LARGEA            FIELD32(0x00040000)
#define LDO25_FRC_ON            FIELD32(0x00080000)
#define CMB_RSV                 FIELD32(0x00300000)
#define XTAL_RDY                FIELD32(0x00400000)
#define PLL_LD                  FIELD32(0x00800000)
#define LDO_CORE_LEVEL          FIELD32(0x0F000000)
#define LDO_BGSEL               FIELD32(0x30000000)
#define LDO3_EN                 FIELD32(0x40000000)
#define LDO0_EN                 FIELD32(0x80000000)

/*
 * EFUSE_CSR_3290: RT3290 EEPROM
 */
#define EFUSE_CTRL_3290                 0x0024

/*
 * EFUSE_DATA3 of 3290
 */
#define EFUSE_DATA3_3290                0x0028

/*
 * EFUSE_DATA2 of 3290
 */
#define EFUSE_DATA2_3290                0x002c

/*
 * EFUSE_DATA1 of 3290
 */
#define EFUSE_DATA1_3290                0x0030

/*
 * EFUSE_DATA0 of 3290
 */
#define EFUSE_DATA0_3290                0x0034

/*
 * OSC_CTRL_CFG
 * Ring oscillator configuration
 */
#define OSC_CTRL                0x0038
#define OSC_REF_CYCLE           FIELD32(0x00001fff)
#define OSC_RSV                 FIELD32(0x0000e000)
#define OSC_CAL_CNT             FIELD32(0x0fff0000)
#define OSC_CAL_ACK             FIELD32(0x10000000)
#define OSC_CLK_32K_VLD         FIELD32(0x20000000)
#define OSC_CAL_REQ             FIELD32(0x40000000)
#define OSC_ROSC_EN             FIELD32(0x80000000)

/*
 * COEX_CFG_0
 */
#define COEX_CFG0               0x0040
#define COEX_CFG_ANT            FIELD32(0xff000000)
/*
 * COEX_CFG_1
 */
#define COEX_CFG1               0x0044

/*
 * COEX_CFG_2
 */
#define COEX_CFG2               0x0048
#define BT_COEX_CFG1            FIELD32(0xff000000)
#define BT_COEX_CFG0            FIELD32(0x00ff0000)
#define WL_COEX_CFG1            FIELD32(0x0000ff00)
#define WL_COEX_CFG0            FIELD32(0x000000ff)
/*
 * PLL_CTRL_CFG
 * PLL configuration register
 */
#define PLL_CTRL                0x0050
#define PLL_RESERVED_INPUT1     FIELD32(0x000000ff)
#define PLL_RESERVED_INPUT2     FIELD32(0x0000ff00)
#define PLL_CONTROL             FIELD32(0x00070000)
#define PLL_LPF_R1              FIELD32(0x00080000)
#define PLL_LPF_C1_CTRL         FIELD32(0x00300000)
#define PLL_LPF_C2_CTRL         FIELD32(0x00c00000)
#define PLL_CP_CURRENT_CTRL     FIELD32(0x03000000)
#define PLL_PFD_DELAY_CTRL      FIELD32(0x0c000000)
#define PLL_LOCK_CTRL           FIELD32(0x70000000)
#define PLL_VBGBK_EN            FIELD32(0x80000000)


/*
 * WLAN_CTRL_CFG
 * RT3290 wlan configuration
 */
#define WLAN_FUN_CTRL                   0x0080
#define WLAN_EN                         FIELD32(0x00000001)
#define WLAN_CLK_EN                     FIELD32(0x00000002)
#define WLAN_RSV1                       FIELD32(0x00000004)
#define WLAN_RESET                      FIELD32(0x00000008)
#define PCIE_APP0_CLK_REQ               FIELD32(0x00000010)
#define FRC_WL_ANT_SET                  FIELD32(0x00000020)
#define INV_TR_SW0                      FIELD32(0x00000040)
#define WLAN_GPIO_IN_BIT0               FIELD32(0x00000100)
#define WLAN_GPIO_IN_BIT1               FIELD32(0x00000200)
#define WLAN_GPIO_IN_BIT2               FIELD32(0x00000400)
#define WLAN_GPIO_IN_BIT3               FIELD32(0x00000800)
#define WLAN_GPIO_IN_BIT4               FIELD32(0x00001000)
#define WLAN_GPIO_IN_BIT5               FIELD32(0x00002000)
#define WLAN_GPIO_IN_BIT6               FIELD32(0x00004000)
#define WLAN_GPIO_IN_BIT7               FIELD32(0x00008000)
#define WLAN_GPIO_IN_BIT_ALL            FIELD32(0x0000ff00)
#define WLAN_GPIO_OUT_BIT0              FIELD32(0x00010000)
#define WLAN_GPIO_OUT_BIT1              FIELD32(0x00020000)
#define WLAN_GPIO_OUT_BIT2              FIELD32(0x00040000)
#define WLAN_GPIO_OUT_BIT3              FIELD32(0x00050000)
#define WLAN_GPIO_OUT_BIT4              FIELD32(0x00100000)
#define WLAN_GPIO_OUT_BIT5              FIELD32(0x00200000)
#define WLAN_GPIO_OUT_BIT6              FIELD32(0x00400000)
#define WLAN_GPIO_OUT_BIT7              FIELD32(0x00800000)
#define WLAN_GPIO_OUT_BIT_ALL           FIELD32(0x00ff0000)
#define WLAN_GPIO_OUT_OE_BIT0           FIELD32(0x01000000)
#define WLAN_GPIO_OUT_OE_BIT1           FIELD32(0x02000000)
#define WLAN_GPIO_OUT_OE_BIT2           FIELD32(0x04000000)
#define WLAN_GPIO_OUT_OE_BIT3           FIELD32(0x08000000)
#define WLAN_GPIO_OUT_OE_BIT4           FIELD32(0x10000000)
#define WLAN_GPIO_OUT_OE_BIT5           FIELD32(0x20000000)
#define WLAN_GPIO_OUT_OE_BIT6           FIELD32(0x40000000)
#define WLAN_GPIO_OUT_OE_BIT7           FIELD32(0x80000000)
#define WLAN_GPIO_OUT_OE_BIT_ALL        FIELD32(0xff000000)

/*
 * AUX_CTRL: Aux/PCI-E related configuration
 */
#define AUX_CTRL                        0x10c
#define AUX_CTRL_WAKE_PCIE_EN           FIELD32(0x00000002)
#define AUX_CTRL_FORCE_PCIE_CLK         FIELD32(0x00000400)

/*
 * OPT_14: Unknown register used by rt3xxx devices.
 */
#define OPT_14_CSR                      0x0114
#define OPT_14_CSR_BIT0                 FIELD32(0x00000001)

/*
 * INT_SOURCE_CSR: Interrupt source register.
 * Write one to clear corresponding bit.
 * TX_FIFO_STATUS: FIFO Statistics is full, sw should read TX_STA_FIFO
 */
#define INT_SOURCE_CSR                  0x0200
#define INT_SOURCE_CSR_RXDELAYINT       FIELD32(0x00000001)
#define INT_SOURCE_CSR_TXDELAYINT       FIELD32(0x00000002)
#define INT_SOURCE_CSR_RX_DONE          FIELD32(0x00000004)
#define INT_SOURCE_CSR_AC0_DMA_DONE     FIELD32(0x00000008)
#define INT_SOURCE_CSR_AC1_DMA_DONE     FIELD32(0x00000010)
#define INT_SOURCE_CSR_AC2_DMA_DONE     FIELD32(0x00000020)
#define INT_SOURCE_CSR_AC3_DMA_DONE     FIELD32(0x00000040)
#define INT_SOURCE_CSR_HCCA_DMA_DONE    FIELD32(0x00000080)
#define INT_SOURCE_CSR_MGMT_DMA_DONE    FIELD32(0x00000100)
#define INT_SOURCE_CSR_MCU_COMMAND      FIELD32(0x00000200)
#define INT_SOURCE_CSR_RXTX_COHERENT    FIELD32(0x00000400)
#define INT_SOURCE_CSR_TBTT             FIELD32(0x00000800)
#define INT_SOURCE_CSR_PRE_TBTT         FIELD32(0x00001000)
#define INT_SOURCE_CSR_TX_FIFO_STATUS   FIELD32(0x00002000)
#define INT_SOURCE_CSR_AUTO_WAKEUP      FIELD32(0x00004000)
#define INT_SOURCE_CSR_GPTIMER          FIELD32(0x00008000)
#define INT_SOURCE_CSR_RX_COHERENT      FIELD32(0x00010000)
#define INT_SOURCE_CSR_TX_COHERENT      FIELD32(0x00020000)

/*
 * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
 */
#define INT_MASK_CSR                    0x0204
#define INT_MASK_CSR_RXDELAYINT         FIELD32(0x00000001)
#define INT_MASK_CSR_TXDELAYINT         FIELD32(0x00000002)
#define INT_MASK_CSR_RX_DONE            FIELD32(0x00000004)
#define INT_MASK_CSR_AC0_DMA_DONE       FIELD32(0x00000008)
#define INT_MASK_CSR_AC1_DMA_DONE       FIELD32(0x00000010)
#define INT_MASK_CSR_AC2_DMA_DONE       FIELD32(0x00000020)
#define INT_MASK_CSR_AC3_DMA_DONE       FIELD32(0x00000040)
#define INT_MASK_CSR_HCCA_DMA_DONE      FIELD32(0x00000080)
#define INT_MASK_CSR_MGMT_DMA_DONE      FIELD32(0x00000100)
#define INT_MASK_CSR_MCU_COMMAND        FIELD32(0x00000200)
#define INT_MASK_CSR_RXTX_COHERENT      FIELD32(0x00000400)
#define INT_MASK_CSR_TBTT               FIELD32(0x00000800)
#define INT_MASK_CSR_PRE_TBTT           FIELD32(0x00001000)
#define INT_MASK_CSR_TX_FIFO_STATUS     FIELD32(0x00002000)
#define INT_MASK_CSR_AUTO_WAKEUP        FIELD32(0x00004000)
#define INT_MASK_CSR_GPTIMER            FIELD32(0x00008000)
#define INT_MASK_CSR_RX_COHERENT        FIELD32(0x00010000)
#define INT_MASK_CSR_TX_COHERENT        FIELD32(0x00020000)

/*
 * WPDMA_GLO_CFG
 */
#define WPDMA_GLO_CFG                   0x0208
#define WPDMA_GLO_CFG_ENABLE_TX_DMA     FIELD32(0x00000001)
#define WPDMA_GLO_CFG_TX_DMA_BUSY       FIELD32(0x00000002)
#define WPDMA_GLO_CFG_ENABLE_RX_DMA     FIELD32(0x00000004)
#define WPDMA_GLO_CFG_RX_DMA_BUSY       FIELD32(0x00000008)
#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030)
#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040)
#define WPDMA_GLO_CFG_BIG_ENDIAN        FIELD32(0x00000080)
#define WPDMA_GLO_CFG_RX_HDR_SCATTER    FIELD32(0x0000ff00)
#define WPDMA_GLO_CFG_HDR_SEG_LEN       FIELD32(0xffff0000)

/*
 * WPDMA_RST_IDX
 */
#define WPDMA_RST_IDX                   0x020c
#define WPDMA_RST_IDX_DTX_IDX0          FIELD32(0x00000001)
#define WPDMA_RST_IDX_DTX_IDX1          FIELD32(0x00000002)
#define WPDMA_RST_IDX_DTX_IDX2          FIELD32(0x00000004)
#define WPDMA_RST_IDX_DTX_IDX3          FIELD32(0x00000008)
#define WPDMA_RST_IDX_DTX_IDX4          FIELD32(0x00000010)
#define WPDMA_RST_IDX_DTX_IDX5          FIELD32(0x00000020)
#define WPDMA_RST_IDX_DRX_IDX0          FIELD32(0x00010000)

/*
 * DELAY_INT_CFG
 */
#define DELAY_INT_CFG                   0x0210
#define DELAY_INT_CFG_RXMAX_PTIME       FIELD32(0x000000ff)
#define DELAY_INT_CFG_RXMAX_PINT        FIELD32(0x00007f00)
#define DELAY_INT_CFG_RXDLY_INT_EN      FIELD32(0x00008000)
#define DELAY_INT_CFG_TXMAX_PTIME       FIELD32(0x00ff0000)
#define DELAY_INT_CFG_TXMAX_PINT        FIELD32(0x7f000000)
#define DELAY_INT_CFG_TXDLY_INT_EN      FIELD32(0x80000000)

/*
 * WMM_AIFSN_CFG: Aifsn for each EDCA AC
 * AIFSN0: AC_VO
 * AIFSN1: AC_VI
 * AIFSN2: AC_BE
 * AIFSN3: AC_BK
 */
#define WMM_AIFSN_CFG                   0x0214
#define WMM_AIFSN_CFG_AIFSN0            FIELD32(0x0000000f)
#define WMM_AIFSN_CFG_AIFSN1            FIELD32(0x000000f0)
#define WMM_AIFSN_CFG_AIFSN2            FIELD32(0x00000f00)
#define WMM_AIFSN_CFG_AIFSN3            FIELD32(0x0000f000)

/*
 * WMM_CWMIN_CSR: CWmin for each EDCA AC
 * CWMIN0: AC_VO
 * CWMIN1: AC_VI
 * CWMIN2: AC_BE
 * CWMIN3: AC_BK
 */
#define WMM_CWMIN_CFG                   0x0218
#define WMM_CWMIN_CFG_CWMIN0            FIELD32(0x0000000f)
#define WMM_CWMIN_CFG_CWMIN1            FIELD32(0x000000f0)
#define WMM_CWMIN_CFG_CWMIN2            FIELD32(0x00000f00)
#define WMM_CWMIN_CFG_CWMIN3            FIELD32(0x0000f000)

/*
 * WMM_CWMAX_CSR: CWmax for each EDCA AC
 * CWMAX0: AC_VO
 * CWMAX1: AC_VI
 * CWMAX2: AC_BE
 * CWMAX3: AC_BK
 */
#define WMM_CWMAX_CFG                   0x021c
#define WMM_CWMAX_CFG_CWMAX0            FIELD32(0x0000000f)
#define WMM_CWMAX_CFG_CWMAX1            FIELD32(0x000000f0)
#define WMM_CWMAX_CFG_CWMAX2            FIELD32(0x00000f00)
#define WMM_CWMAX_CFG_CWMAX3            FIELD32(0x0000f000)

/*
 * AC_TXOP0: AC_VO/AC_VI TXOP register
 * AC0TXOP: AC_VO in unit of 32us
 * AC1TXOP: AC_VI in unit of 32us
 */
#define WMM_TXOP0_CFG                   0x0220
#define WMM_TXOP0_CFG_AC0TXOP           FIELD32(0x0000ffff)
#define WMM_TXOP0_CFG_AC1TXOP           FIELD32(0xffff0000)

/*
 * AC_TXOP1: AC_BE/AC_BK TXOP register
 * AC2TXOP: AC_BE in unit of 32us
 * AC3TXOP: AC_BK in unit of 32us
 */
#define WMM_TXOP1_CFG                   0x0224
#define WMM_TXOP1_CFG_AC2TXOP           FIELD32(0x0000ffff)
#define WMM_TXOP1_CFG_AC3TXOP           FIELD32(0xffff0000)

/*
 * GPIO_CTRL:
 *      GPIO_CTRL_VALx: GPIO value
 *      GPIO_CTRL_DIRx: GPIO direction: 0 = output; 1 = input
 */
#define GPIO_CTRL                       0x0228
#define GPIO_CTRL_VAL0                  FIELD32(0x00000001)
#define GPIO_CTRL_VAL1                  FIELD32(0x00000002)
#define GPIO_CTRL_VAL2                  FIELD32(0x00000004)
#define GPIO_CTRL_VAL3                  FIELD32(0x00000008)
#define GPIO_CTRL_VAL4                  FIELD32(0x00000010)
#define GPIO_CTRL_VAL5                  FIELD32(0x00000020)
#define GPIO_CTRL_VAL6                  FIELD32(0x00000040)
#define GPIO_CTRL_VAL7                  FIELD32(0x00000080)
#define GPIO_CTRL_DIR0                  FIELD32(0x00000100)
#define GPIO_CTRL_DIR1                  FIELD32(0x00000200)
#define GPIO_CTRL_DIR2                  FIELD32(0x00000400)
#define GPIO_CTRL_DIR3                  FIELD32(0x00000800)
#define GPIO_CTRL_DIR4                  FIELD32(0x00001000)
#define GPIO_CTRL_DIR5                  FIELD32(0x00002000)
#define GPIO_CTRL_DIR6                  FIELD32(0x00004000)
#define GPIO_CTRL_DIR7                  FIELD32(0x00008000)
#define GPIO_CTRL_VAL8                  FIELD32(0x00010000)
#define GPIO_CTRL_VAL9                  FIELD32(0x00020000)
#define GPIO_CTRL_VAL10                 FIELD32(0x00040000)
#define GPIO_CTRL_DIR8                  FIELD32(0x01000000)
#define GPIO_CTRL_DIR9                  FIELD32(0x02000000)
#define GPIO_CTRL_DIR10                 FIELD32(0x04000000)

/*
 * MCU_CMD_CFG
 */
#define MCU_CMD_CFG                     0x022c

/*
 * AC_VO register offsets
 */
#define TX_BASE_PTR0                    0x0230
#define TX_MAX_CNT0                     0x0234
#define TX_CTX_IDX0                     0x0238
#define TX_DTX_IDX0                     0x023c

/*
 * AC_VI register offsets
 */
#define TX_BASE_PTR1                    0x0240
#define TX_MAX_CNT1                     0x0244
#define TX_CTX_IDX1                     0x0248
#define TX_DTX_IDX1                     0x024c

/*
 * AC_BE register offsets
 */
#define TX_BASE_PTR2                    0x0250
#define TX_MAX_CNT2                     0x0254
#define TX_CTX_IDX2                     0x0258
#define TX_DTX_IDX2                     0x025c

/*
 * AC_BK register offsets
 */
#define TX_BASE_PTR3                    0x0260
#define TX_MAX_CNT3                     0x0264
#define TX_CTX_IDX3                     0x0268
#define TX_DTX_IDX3                     0x026c

/*
 * HCCA register offsets
 */
#define TX_BASE_PTR4                    0x0270
#define TX_MAX_CNT4                     0x0274
#define TX_CTX_IDX4                     0x0278
#define TX_DTX_IDX4                     0x027c

/*
 * MGMT register offsets
 */
#define TX_BASE_PTR5                    0x0280
#define TX_MAX_CNT5                     0x0284
#define TX_CTX_IDX5                     0x0288
#define TX_DTX_IDX5                     0x028c

/*
 * RX register offsets
 */
#define RX_BASE_PTR                     0x0290
#define RX_MAX_CNT                      0x0294
#define RX_CRX_IDX                      0x0298
#define RX_DRX_IDX                      0x029c

/*
 * USB_DMA_CFG
 * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
 * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
 * PHY_CLEAR: phy watch dog enable.
 * TX_CLEAR: Clear USB DMA TX path.
 * TXOP_HALT: Halt TXOP count down when TX buffer is full.
 * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
 * RX_BULK_EN: Enable USB DMA Rx.
 * TX_BULK_EN: Enable USB DMA Tx.
 * EP_OUT_VALID: OUT endpoint data valid.
 * RX_BUSY: USB DMA RX FSM busy.
 * TX_BUSY: USB DMA TX FSM busy.
 */
#define USB_DMA_CFG                     0x02a0
#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
#define USB_DMA_CFG_RX_BULK_AGG_LIMIT   FIELD32(0x0000ff00)
#define USB_DMA_CFG_PHY_CLEAR           FIELD32(0x00010000)
#define USB_DMA_CFG_TX_CLEAR            FIELD32(0x00080000)
#define USB_DMA_CFG_TXOP_HALT           FIELD32(0x00100000)
#define USB_DMA_CFG_RX_BULK_AGG_EN      FIELD32(0x00200000)
#define USB_DMA_CFG_RX_BULK_EN          FIELD32(0x00400000)
#define USB_DMA_CFG_TX_BULK_EN          FIELD32(0x00800000)
#define USB_DMA_CFG_EP_OUT_VALID        FIELD32(0x3f000000)
#define USB_DMA_CFG_RX_BUSY             FIELD32(0x40000000)
#define USB_DMA_CFG_TX_BUSY             FIELD32(0x80000000)

/*
 * US_CYC_CNT
 * BT_MODE_EN: Bluetooth mode enable
 * CLOCK CYCLE: Clock cycle count in 1us.
 * PCI:0x21, PCIE:0x7d, USB:0x1e
 */
#define US_CYC_CNT                      0x02a4
#define US_CYC_CNT_BT_MODE_EN           FIELD32(0x00000100)
#define US_CYC_CNT_CLOCK_CYCLE          FIELD32(0x000000ff)

/*
 * PBF_SYS_CTRL
 * HOST_RAM_WRITE: enable Host program ram write selection
 */
#define PBF_SYS_CTRL                    0x0400
#define PBF_SYS_CTRL_READY              FIELD32(0x00000080)
#define PBF_SYS_CTRL_HOST_RAM_WRITE     FIELD32(0x00010000)

/*
 * HOST-MCU shared memory
 */
#define HOST_CMD_CSR                    0x0404
#define HOST_CMD_CSR_HOST_COMMAND       FIELD32(0x000000ff)

/*
 * PBF registers
 * Most are for debug. Driver doesn't touch PBF register.
 */
#define PBF_CFG                         0x0408
#define PBF_MAX_PCNT                    0x040c
#define PBF_CTRL                        0x0410
#define PBF_INT_STA                     0x0414
#define PBF_INT_ENA                     0x0418

/*
 * BCN_OFFSET0:
 */
#define BCN_OFFSET0                     0x042c
#define BCN_OFFSET0_BCN0                FIELD32(0x000000ff)
#define BCN_OFFSET0_BCN1                FIELD32(0x0000ff00)
#define BCN_OFFSET0_BCN2                FIELD32(0x00ff0000)
#define BCN_OFFSET0_BCN3                FIELD32(0xff000000)

/*
 * BCN_OFFSET1:
 */
#define BCN_OFFSET1                     0x0430
#define BCN_OFFSET1_BCN4                FIELD32(0x000000ff)
#define BCN_OFFSET1_BCN5                FIELD32(0x0000ff00)
#define BCN_OFFSET1_BCN6                FIELD32(0x00ff0000)
#define BCN_OFFSET1_BCN7                FIELD32(0xff000000)

/*
 * TXRXQ_PCNT: PBF register
 * PCNT_TX0Q: Page count for TX hardware queue 0
 * PCNT_TX1Q: Page count for TX hardware queue 1
 * PCNT_TX2Q: Page count for TX hardware queue 2
 * PCNT_RX0Q: Page count for RX hardware queue
 */
#define TXRXQ_PCNT                      0x0438
#define TXRXQ_PCNT_TX0Q                 FIELD32(0x000000ff)
#define TXRXQ_PCNT_TX1Q                 FIELD32(0x0000ff00)
#define TXRXQ_PCNT_TX2Q                 FIELD32(0x00ff0000)
#define TXRXQ_PCNT_RX0Q                 FIELD32(0xff000000)

/*
 * PBF register
 * Debug. Driver doesn't touch PBF register.
 */
#define PBF_DBG                         0x043c

/*
 * RF registers
 */
#define RF_CSR_CFG                      0x0500
#define RF_CSR_CFG_DATA                 FIELD32(0x000000ff)
#define RF_CSR_CFG_REGNUM               FIELD32(0x00003f00)
#define RF_CSR_CFG_WRITE                FIELD32(0x00010000)
#define RF_CSR_CFG_BUSY                 FIELD32(0x00020000)

/*
 * MT7620 RF registers (reversed order)
 */
#define RF_CSR_CFG_DATA_MT7620          FIELD32(0x0000ff00)
#define RF_CSR_CFG_REGNUM_MT7620        FIELD32(0x03ff0000)
#define RF_CSR_CFG_WRITE_MT7620         FIELD32(0x00000010)
#define RF_CSR_CFG_BUSY_MT7620          FIELD32(0x00000001)

/* undocumented registers for calibration of new MAC */
#define RF_CONTROL0                     0x0518
#define RF_BYPASS0                      0x051c
#define RF_CONTROL1                     0x0520
#define RF_BYPASS1                      0x0524
#define RF_CONTROL2                     0x0528
#define RF_BYPASS2                      0x052c
#define RF_CONTROL3                     0x0530
#define RF_BYPASS3                      0x0534

/*
 * EFUSE_CSR: RT30x0 EEPROM
 */
#define EFUSE_CTRL                      0x0580
#define EFUSE_CTRL_ADDRESS_IN           FIELD32(0x03fe0000)
#define EFUSE_CTRL_MODE                 FIELD32(0x000000c0)
#define EFUSE_CTRL_KICK                 FIELD32(0x40000000)
#define EFUSE_CTRL_PRESENT              FIELD32(0x80000000)

/*
 * EFUSE_DATA0
 */
#define EFUSE_DATA0                     0x0590

/*
 * EFUSE_DATA1
 */
#define EFUSE_DATA1                     0x0594

/*
 * EFUSE_DATA2
 */
#define EFUSE_DATA2                     0x0598

/*
 * EFUSE_DATA3
 */
#define EFUSE_DATA3                     0x059c

/*
 * LDO_CFG0
 */
#define LDO_CFG0                        0x05d4
#define LDO_CFG0_DELAY3                 FIELD32(0x000000ff)
#define LDO_CFG0_DELAY2                 FIELD32(0x0000ff00)
#define LDO_CFG0_DELAY1                 FIELD32(0x00ff0000)
#define LDO_CFG0_BGSEL                  FIELD32(0x03000000)
#define LDO_CFG0_LDO_CORE_VLEVEL        FIELD32(0x1c000000)
#define LD0_CFG0_LDO25_LEVEL            FIELD32(0x60000000)
#define LDO_CFG0_LDO25_LARGEA           FIELD32(0x80000000)

/*
 * GPIO_SWITCH
 */
#define GPIO_SWITCH                     0x05dc
#define GPIO_SWITCH_0                   FIELD32(0x00000001)
#define GPIO_SWITCH_1                   FIELD32(0x00000002)
#define GPIO_SWITCH_2                   FIELD32(0x00000004)
#define GPIO_SWITCH_3                   FIELD32(0x00000008)
#define GPIO_SWITCH_4                   FIELD32(0x00000010)
#define GPIO_SWITCH_5                   FIELD32(0x00000020)
#define GPIO_SWITCH_6                   FIELD32(0x00000040)
#define GPIO_SWITCH_7                   FIELD32(0x00000080)

/*
 * FIXME: where the DEBUG_INDEX name come from?
 */
#define MAC_DEBUG_INDEX                 0x05e8
#define MAC_DEBUG_INDEX_XTAL            FIELD32(0x80000000)

/*
 * MAC Control/Status Registers(CSR).
 * Some values are set in TU, whereas 1 TU == 1024 us.
 */

/*
 * MAC_CSR0: ASIC revision number.
 * ASIC_REV: 0
 * ASIC_VER: 2860 or 2870
 */
#define MAC_CSR0                        0x1000
#define MAC_CSR0_REVISION               FIELD32(0x0000ffff)
#define MAC_CSR0_CHIPSET                FIELD32(0xffff0000)

/*
 * MAC_SYS_CTRL:
 */
#define MAC_SYS_CTRL                    0x1004
#define MAC_SYS_CTRL_RESET_CSR          FIELD32(0x00000001)
#define MAC_SYS_CTRL_RESET_BBP          FIELD32(0x00000002)
#define MAC_SYS_CTRL_ENABLE_TX          FIELD32(0x00000004)
#define MAC_SYS_CTRL_ENABLE_RX          FIELD32(0x00000008)
#define MAC_SYS_CTRL_CONTINUOUS_TX      FIELD32(0x00000010)
#define MAC_SYS_CTRL_LOOPBACK           FIELD32(0x00000020)
#define MAC_SYS_CTRL_WLAN_HALT          FIELD32(0x00000040)
#define MAC_SYS_CTRL_RX_TIMESTAMP       FIELD32(0x00000080)

/*
 * MAC_ADDR_DW0: STA MAC register 0
 */
#define MAC_ADDR_DW0                    0x1008
#define MAC_ADDR_DW0_BYTE0              FIELD32(0x000000ff)
#define MAC_ADDR_DW0_BYTE1              FIELD32(0x0000ff00)
#define MAC_ADDR_DW0_BYTE2              FIELD32(0x00ff0000)
#define MAC_ADDR_DW0_BYTE3              FIELD32(0xff000000)

/*
 * MAC_ADDR_DW1: STA MAC register 1
 * UNICAST_TO_ME_MASK:
 * Used to mask off bits from byte 5 of the MAC address
 * to determine the UNICAST_TO_ME bit for RX frames.
 * The full mask is complemented by BSS_ID_MASK:
 *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
 */
#define MAC_ADDR_DW1                    0x100c
#define MAC_ADDR_DW1_BYTE4              FIELD32(0x000000ff)
#define MAC_ADDR_DW1_BYTE5              FIELD32(0x0000ff00)
#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)

/*
 * MAC_BSSID_DW0: BSSID register 0
 */
#define MAC_BSSID_DW0                   0x1010
#define MAC_BSSID_DW0_BYTE0             FIELD32(0x000000ff)
#define MAC_BSSID_DW0_BYTE1             FIELD32(0x0000ff00)
#define MAC_BSSID_DW0_BYTE2             FIELD32(0x00ff0000)
#define MAC_BSSID_DW0_BYTE3             FIELD32(0xff000000)

/*
 * MAC_BSSID_DW1: BSSID register 1
 * BSS_ID_MASK:
 *     0: 1-BSSID mode (BSS index = 0)
 *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
 *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
 *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
 * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
 * BSSID. This will make sure that those bits will be ignored
 * when determining the MY_BSS of RX frames.
 */
#define MAC_BSSID_DW1                   0x1014
#define MAC_BSSID_DW1_BYTE4             FIELD32(0x000000ff)
#define MAC_BSSID_DW1_BYTE5             FIELD32(0x0000ff00)
#define MAC_BSSID_DW1_BSS_ID_MASK       FIELD32(0x00030000)
#define MAC_BSSID_DW1_BSS_BCN_NUM       FIELD32(0x001c0000)

/*
 * MAX_LEN_CFG: Maximum frame length register.
 * MAX_MPDU: rt2860b max 16k bytes
 * MAX_PSDU: Maximum PSDU length
 *      (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
 */
#define MAX_LEN_CFG                     0x1018
#define MAX_LEN_CFG_MAX_MPDU            FIELD32(0x00000fff)
#define MAX_LEN_CFG_MAX_PSDU            FIELD32(0x00003000)
#define MAX_LEN_CFG_MIN_PSDU            FIELD32(0x0000c000)
#define MAX_LEN_CFG_MIN_MPDU            FIELD32(0x000f0000)

/*
 * BBP_CSR_CFG: BBP serial control register
 * VALUE: Register value to program into BBP
 * REG_NUM: Selected BBP register
 * READ_CONTROL: 0 write BBP, 1 read BBP
 * BUSY: ASIC is busy executing BBP commands
 * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
 * BBP_RW_MODE: 0 serial, 1 parallel
 */
#define BBP_CSR_CFG                     0x101c
#define BBP_CSR_CFG_VALUE               FIELD32(0x000000ff)
#define BBP_CSR_CFG_REGNUM              FIELD32(0x0000ff00)
#define BBP_CSR_CFG_READ_CONTROL        FIELD32(0x00010000)
#define BBP_CSR_CFG_BUSY                FIELD32(0x00020000)
#define BBP_CSR_CFG_BBP_PAR_DUR         FIELD32(0x00040000)
#define BBP_CSR_CFG_BBP_RW_MODE         FIELD32(0x00080000)

/*
 * RF_CSR_CFG0: RF control register
 * REGID_AND_VALUE: Register value to program into RF
 * BITWIDTH: Selected RF register
 * STANDBYMODE: 0 high when standby, 1 low when standby
 * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
 * BUSY: ASIC is busy executing RF commands
 */
#define RF_CSR_CFG0                     0x1020
#define RF_CSR_CFG0_REGID_AND_VALUE     FIELD32(0x00ffffff)
#define RF_CSR_CFG0_BITWIDTH            FIELD32(0x1f000000)
#define RF_CSR_CFG0_REG_VALUE_BW        FIELD32(0x1fffffff)
#define RF_CSR_CFG0_STANDBYMODE         FIELD32(0x20000000)
#define RF_CSR_CFG0_SEL                 FIELD32(0x40000000)
#define RF_CSR_CFG0_BUSY                FIELD32(0x80000000)

/*
 * RF_CSR_CFG1: RF control register
 * REGID_AND_VALUE: Register value to program into RF
 * RFGAP: Gap between BB_CONTROL_RF and RF_LE
 *        0: 3 system clock cycle (37.5usec)
 *        1: 5 system clock cycle (62.5usec)
 */
#define RF_CSR_CFG1                     0x1024
#define RF_CSR_CFG1_REGID_AND_VALUE     FIELD32(0x00ffffff)
#define RF_CSR_CFG1_RFGAP               FIELD32(0x1f000000)

/*
 * RF_CSR_CFG2: RF control register
 * VALUE: Register value to program into RF
 */
#define RF_CSR_CFG2                     0x1028
#define RF_CSR_CFG2_VALUE               FIELD32(0x00ffffff)

/*
 * LED_CFG: LED control
 * ON_PERIOD: LED active time (ms) during TX (only used for LED mode 1)
 * OFF_PERIOD: LED inactive time (ms) during TX (only used for LED mode 1)
 * SLOW_BLINK_PERIOD: LED blink interval in seconds (only used for LED mode 2)
 * color LED's:
 *   0: off
 *   1: blinking upon TX2
 *   2: periodic slow blinking
 *   3: always on
 * LED polarity:
 *   0: active low
 *   1: active high
 */
#define LED_CFG                         0x102c
#define LED_CFG_ON_PERIOD               FIELD32(0x000000ff)
#define LED_CFG_OFF_PERIOD              FIELD32(0x0000ff00)
#define LED_CFG_SLOW_BLINK_PERIOD       FIELD32(0x003f0000)
#define LED_CFG_R_LED_MODE              FIELD32(0x03000000)
#define LED_CFG_G_LED_MODE              FIELD32(0x0c000000)
#define LED_CFG_Y_LED_MODE              FIELD32(0x30000000)
#define LED_CFG_LED_POLAR               FIELD32(0x40000000)

/*
 * AMPDU_BA_WINSIZE: Force BlockAck window size
 * FORCE_WINSIZE_ENABLE:
 *   0: Disable forcing of BlockAck window size
 *   1: Enable forcing of BlockAck window size, overwrites values BlockAck
 *      window size values in the TXWI
 * FORCE_WINSIZE: BlockAck window size
 */
#define AMPDU_BA_WINSIZE                0x1040
#define AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE FIELD32(0x00000020)
#define AMPDU_BA_WINSIZE_FORCE_WINSIZE  FIELD32(0x0000001f)

/*
 * XIFS_TIME_CFG: MAC timing
 * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
 * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
 * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
 *      when MAC doesn't reference BBP signal BBRXEND
 * EIFS: unit 1us
 * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
 *
 */
#define XIFS_TIME_CFG                   0x1100
#define XIFS_TIME_CFG_CCKM_SIFS_TIME    FIELD32(0x000000ff)
#define XIFS_TIME_CFG_OFDM_SIFS_TIME    FIELD32(0x0000ff00)
#define XIFS_TIME_CFG_OFDM_XIFS_TIME    FIELD32(0x000f0000)
#define XIFS_TIME_CFG_EIFS              FIELD32(0x1ff00000)
#define XIFS_TIME_CFG_BB_RXEND_ENABLE   FIELD32(0x20000000)

/*
 * BKOFF_SLOT_CFG:
 */
#define BKOFF_SLOT_CFG                  0x1104
#define BKOFF_SLOT_CFG_SLOT_TIME        FIELD32(0x000000ff)
#define BKOFF_SLOT_CFG_CC_DELAY_TIME    FIELD32(0x0000ff00)

/*
 * NAV_TIME_CFG:
 */
#define NAV_TIME_CFG                    0x1108
#define NAV_TIME_CFG_SIFS               FIELD32(0x000000ff)
#define NAV_TIME_CFG_SLOT_TIME          FIELD32(0x0000ff00)
#define NAV_TIME_CFG_EIFS               FIELD32(0x01ff0000)
#define NAV_TIME_ZERO_SIFS              FIELD32(0x02000000)

/*
 * CH_TIME_CFG: count as channel busy
 * EIFS_BUSY: Count EIFS as channel busy
 * NAV_BUSY: Count NAS as channel busy
 * RX_BUSY: Count RX as channel busy
 * TX_BUSY: Count TX as channel busy
 * TMR_EN: Enable channel statistics timer
 */
#define CH_TIME_CFG                     0x110c
#define CH_TIME_CFG_EIFS_BUSY           FIELD32(0x00000010)
#define CH_TIME_CFG_NAV_BUSY            FIELD32(0x00000008)
#define CH_TIME_CFG_RX_BUSY             FIELD32(0x00000004)
#define CH_TIME_CFG_TX_BUSY             FIELD32(0x00000002)
#define CH_TIME_CFG_TMR_EN              FIELD32(0x00000001)

/*
 * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
 */
#define PBF_LIFE_TIMER                  0x1110

/*
 * BCN_TIME_CFG:
 * BEACON_INTERVAL: in unit of 1/16 TU
 * TSF_TICKING: Enable TSF auto counting
 * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
 * BEACON_GEN: Enable beacon generator
 */
#define BCN_TIME_CFG                    0x1114
#define BCN_TIME_CFG_BEACON_INTERVAL    FIELD32(0x0000ffff)
#define BCN_TIME_CFG_TSF_TICKING        FIELD32(0x00010000)
#define BCN_TIME_CFG_TSF_SYNC           FIELD32(0x00060000)
#define BCN_TIME_CFG_TBTT_ENABLE        FIELD32(0x00080000)
#define BCN_TIME_CFG_BEACON_GEN         FIELD32(0x00100000)
#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000)

/*
 * TBTT_SYNC_CFG:
 * BCN_AIFSN: Beacon AIFSN after TBTT interrupt in slots
 * BCN_CWMIN: Beacon CWMin after TBTT interrupt in slots
 */
#define TBTT_SYNC_CFG                   0x1118
#define TBTT_SYNC_CFG_TBTT_ADJUST       FIELD32(0x000000ff)
#define TBTT_SYNC_CFG_BCN_EXP_WIN       FIELD32(0x0000ff00)
#define TBTT_SYNC_CFG_BCN_AIFSN         FIELD32(0x000f0000)
#define TBTT_SYNC_CFG_BCN_CWMIN         FIELD32(0x00f00000)

/*
 * TSF_TIMER_DW0: Local lsb TSF timer, read-only
 */
#define TSF_TIMER_DW0                   0x111c
#define TSF_TIMER_DW0_LOW_WORD          FIELD32(0xffffffff)

/*
 * TSF_TIMER_DW1: Local msb TSF timer, read-only
 */
#define TSF_TIMER_DW1                   0x1120
#define TSF_TIMER_DW1_HIGH_WORD         FIELD32(0xffffffff)

/*
 * TBTT_TIMER: TImer remains till next TBTT, read-only
 */
#define TBTT_TIMER                      0x1124

/*
 * INT_TIMER_CFG: timer configuration
 * PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU
 * GP_TIMER: period of general purpose timer in units of 1/16 TU
 */
#define INT_TIMER_CFG                   0x1128
#define INT_TIMER_CFG_PRE_TBTT_TIMER    FIELD32(0x0000ffff)
#define INT_TIMER_CFG_GP_TIMER          FIELD32(0xffff0000)

/*
 * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
 */

#define INT_TIMER_EN                    0x112c
#define INT_TIMER_EN_PRE_TBTT_TIMER     FIELD32(0x00000001)
#define INT_TIMER_EN_GP_TIMER           FIELD32(0x00000002)

/*
 * CH_IDLE_STA: channel idle time (in us)
 */
#define CH_IDLE_STA                     0x1130

/*
 * CH_BUSY_STA: channel busy time on primary channel (in us)
 */
#define CH_BUSY_STA                     0x1134

/*
 * CH_BUSY_STA_SEC: channel busy time on secondary channel in HT40 mode (in us)
 */
#define CH_BUSY_STA_SEC                 0x1138

/*
 * MAC_STATUS_CFG:
 * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
 *      if 1 or higher one of the 2 registers is busy.
 */
#define MAC_STATUS_CFG                  0x1200
#define MAC_STATUS_CFG_BBP_RF_BUSY      FIELD32(0x00000003)

/*
 * PWR_PIN_CFG:
 */
#define PWR_PIN_CFG                     0x1204

/*
 * AUTOWAKEUP_CFG: Manual power control / status register
 * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
 * AUTOWAKE: 0:sleep, 1:awake
 */
#define AUTOWAKEUP_CFG                  0x1208
#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME   FIELD32(0x000000ff)
#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00)
#define AUTOWAKEUP_CFG_AUTOWAKE         FIELD32(0x00008000)

/*
 * MIMO_PS_CFG: MIMO Power-save Configuration
 */
#define MIMO_PS_CFG                     0x1210
#define MIMO_PS_CFG_MMPS_BB_EN          FIELD32(0x00000001)
#define MIMO_PS_CFG_MMPS_RX_ANT_NUM     FIELD32(0x00000006)
#define MIMO_PS_CFG_MMPS_RF_EN          FIELD32(0x00000008)
#define MIMO_PS_CFG_RX_STBY_POL         FIELD32(0x00000010)
#define MIMO_PS_CFG_RX_RX_STBY0         FIELD32(0x00000020)

/*
 * EDCA_AC0_CFG:
 */
#define EDCA_AC0_CFG                    0x1300
#define EDCA_AC0_CFG_TX_OP              FIELD32(0x000000ff)
#define EDCA_AC0_CFG_AIFSN              FIELD32(0x00000f00)
#define EDCA_AC0_CFG_CWMIN              FIELD32(0x0000f000)
#define EDCA_AC0_CFG_CWMAX              FIELD32(0x000f0000)

/*
 * EDCA_AC1_CFG:
 */
#define EDCA_AC1_CFG                    0x1304
#define EDCA_AC1_CFG_TX_OP              FIELD32(0x000000ff)
#define EDCA_AC1_CFG_AIFSN              FIELD32(0x00000f00)
#define EDCA_AC1_CFG_CWMIN              FIELD32(0x0000f000)
#define EDCA_AC1_CFG_CWMAX              FIELD32(0x000f0000)

/*
 * EDCA_AC2_CFG:
 */
#define EDCA_AC2_CFG                    0x1308
#define EDCA_AC2_CFG_TX_OP              FIELD32(0x000000ff)
#define EDCA_AC2_CFG_AIFSN              FIELD32(0x00000f00)
#define EDCA_AC2_CFG_CWMIN              FIELD32(0x0000f000)
#define EDCA_AC2_CFG_CWMAX              FIELD32(0x000f0000)

/*
 * EDCA_AC3_CFG:
 */
#define EDCA_AC3_CFG                    0x130c
#define EDCA_AC3_CFG_TX_OP              FIELD32(0x000000ff)
#define EDCA_AC3_CFG_AIFSN              FIELD32(0x00000f00)
#define EDCA_AC3_CFG_CWMIN              FIELD32(0x0000f000)
#define EDCA_AC3_CFG_CWMAX              FIELD32(0x000f0000)

/*
 * EDCA_TID_AC_MAP:
 */
#define EDCA_TID_AC_MAP                 0x1310

/*
 * TX_PWR_CFG:
 */
#define TX_PWR_CFG_RATE0                FIELD32(0x0000000f)
#define TX_PWR_CFG_RATE1                FIELD32(0x000000f0)
#define TX_PWR_CFG_RATE2                FIELD32(0x00000f00)
#define TX_PWR_CFG_RATE3                FIELD32(0x0000f000)
#define TX_PWR_CFG_RATE4                FIELD32(0x000f0000)
#define TX_PWR_CFG_RATE5                FIELD32(0x00f00000)
#define TX_PWR_CFG_RATE6                FIELD32(0x0f000000)
#define TX_PWR_CFG_RATE7                FIELD32(0xf0000000)

/*
 * TX_PWR_CFG_0:
 */
#define TX_PWR_CFG_0                    0x1314
#define TX_PWR_CFG_0_1MBS               FIELD32(0x0000000f)
#define TX_PWR_CFG_0_2MBS               FIELD32(0x000000f0)
#define TX_PWR_CFG_0_55MBS              FIELD32(0x00000f00)
#define TX_PWR_CFG_0_11MBS              FIELD32(0x0000f000)
#define TX_PWR_CFG_0_6MBS               FIELD32(0x000f0000)
#define TX_PWR_CFG_0_9MBS               FIELD32(0x00f00000)
#define TX_PWR_CFG_0_12MBS              FIELD32(0x0f000000)
#define TX_PWR_CFG_0_18MBS              FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_0_CCK1_CH0           FIELD32(0x0000000f)
#define TX_PWR_CFG_0_CCK1_CH1           FIELD32(0x000000f0)
#define TX_PWR_CFG_0_CCK5_CH0           FIELD32(0x00000f00)
#define TX_PWR_CFG_0_CCK5_CH1           FIELD32(0x0000f000)
#define TX_PWR_CFG_0_OFDM6_CH0          FIELD32(0x000f0000)
#define TX_PWR_CFG_0_OFDM6_CH1          FIELD32(0x00f00000)
#define TX_PWR_CFG_0_OFDM12_CH0         FIELD32(0x0f000000)
#define TX_PWR_CFG_0_OFDM12_CH1         FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_0B_1MBS_2MBS         FIELD32(0x000000ff)
#define TX_PWR_CFG_0B_5MBS_11MBS                FIELD32(0x0000ff00)
#define TX_PWR_CFG_0B_6MBS_9MBS         FIELD32(0x00ff0000)
#define TX_PWR_CFG_0B_12MBS_18MBS       FIELD32(0xff000000)


/*
 * TX_PWR_CFG_1:
 */
#define TX_PWR_CFG_1                    0x1318
#define TX_PWR_CFG_1_24MBS              FIELD32(0x0000000f)
#define TX_PWR_CFG_1_36MBS              FIELD32(0x000000f0)
#define TX_PWR_CFG_1_48MBS              FIELD32(0x00000f00)
#define TX_PWR_CFG_1_54MBS              FIELD32(0x0000f000)
#define TX_PWR_CFG_1_MCS0               FIELD32(0x000f0000)
#define TX_PWR_CFG_1_MCS1               FIELD32(0x00f00000)
#define TX_PWR_CFG_1_MCS2               FIELD32(0x0f000000)
#define TX_PWR_CFG_1_MCS3               FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_1_OFDM24_CH0         FIELD32(0x0000000f)
#define TX_PWR_CFG_1_OFDM24_CH1         FIELD32(0x000000f0)
#define TX_PWR_CFG_1_OFDM48_CH0         FIELD32(0x00000f00)
#define TX_PWR_CFG_1_OFDM48_CH1         FIELD32(0x0000f000)
#define TX_PWR_CFG_1_MCS0_CH0           FIELD32(0x000f0000)
#define TX_PWR_CFG_1_MCS0_CH1           FIELD32(0x00f00000)
#define TX_PWR_CFG_1_MCS2_CH0           FIELD32(0x0f000000)
#define TX_PWR_CFG_1_MCS2_CH1           FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_1B_24MBS_36MBS       FIELD32(0x000000ff)
#define TX_PWR_CFG_1B_48MBS             FIELD32(0x0000ff00)
#define TX_PWR_CFG_1B_MCS0_MCS1         FIELD32(0x00ff0000)
#define TX_PWR_CFG_1B_MCS2_MCS3         FIELD32(0xff000000)

/*
 * TX_PWR_CFG_2:
 */
#define TX_PWR_CFG_2                    0x131c
#define TX_PWR_CFG_2_MCS4               FIELD32(0x0000000f)
#define TX_PWR_CFG_2_MCS5               FIELD32(0x000000f0)
#define TX_PWR_CFG_2_MCS6               FIELD32(0x00000f00)
#define TX_PWR_CFG_2_MCS7               FIELD32(0x0000f000)
#define TX_PWR_CFG_2_MCS8               FIELD32(0x000f0000)
#define TX_PWR_CFG_2_MCS9               FIELD32(0x00f00000)
#define TX_PWR_CFG_2_MCS10              FIELD32(0x0f000000)
#define TX_PWR_CFG_2_MCS11              FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_2_MCS4_CH0           FIELD32(0x0000000f)
#define TX_PWR_CFG_2_MCS4_CH1           FIELD32(0x000000f0)
#define TX_PWR_CFG_2_MCS6_CH0           FIELD32(0x00000f00)
#define TX_PWR_CFG_2_MCS6_CH1           FIELD32(0x0000f000)
#define TX_PWR_CFG_2_MCS8_CH0           FIELD32(0x000f0000)
#define TX_PWR_CFG_2_MCS8_CH1           FIELD32(0x00f00000)
#define TX_PWR_CFG_2_MCS10_CH0          FIELD32(0x0f000000)
#define TX_PWR_CFG_2_MCS10_CH1          FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_2B_MCS4_MCS5         FIELD32(0x000000ff)
#define TX_PWR_CFG_2B_MCS6_MCS7         FIELD32(0x0000ff00)
#define TX_PWR_CFG_2B_MCS8_MCS9         FIELD32(0x00ff0000)
#define TX_PWR_CFG_2B_MCS10_MCS11       FIELD32(0xff000000)

/*
 * TX_PWR_CFG_3:
 */
#define TX_PWR_CFG_3                    0x1320
#define TX_PWR_CFG_3_MCS12              FIELD32(0x0000000f)
#define TX_PWR_CFG_3_MCS13              FIELD32(0x000000f0)
#define TX_PWR_CFG_3_MCS14              FIELD32(0x00000f00)
#define TX_PWR_CFG_3_MCS15              FIELD32(0x0000f000)
#define TX_PWR_CFG_3_UKNOWN1            FIELD32(0x000f0000)
#define TX_PWR_CFG_3_UKNOWN2            FIELD32(0x00f00000)
#define TX_PWR_CFG_3_UKNOWN3            FIELD32(0x0f000000)
#define TX_PWR_CFG_3_UKNOWN4            FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_3_MCS12_CH0          FIELD32(0x0000000f)
#define TX_PWR_CFG_3_MCS12_CH1          FIELD32(0x000000f0)
#define TX_PWR_CFG_3_MCS14_CH0          FIELD32(0x00000f00)
#define TX_PWR_CFG_3_MCS14_CH1          FIELD32(0x0000f000)
#define TX_PWR_CFG_3_STBC0_CH0          FIELD32(0x000f0000)
#define TX_PWR_CFG_3_STBC0_CH1          FIELD32(0x00f00000)
#define TX_PWR_CFG_3_STBC2_CH0          FIELD32(0x0f000000)
#define TX_PWR_CFG_3_STBC2_CH1          FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_3B_MCS12_MCS13       FIELD32(0x000000ff)
#define TX_PWR_CFG_3B_MCS14             FIELD32(0x0000ff00)
#define TX_PWR_CFG_3B_STBC_MCS0_MCS1    FIELD32(0x00ff0000)
#define TX_PWR_CFG_3B_STBC_MCS2_MSC3    FIELD32(0xff000000)

/*
 * TX_PWR_CFG_4:
 */
#define TX_PWR_CFG_4                    0x1324
#define TX_PWR_CFG_4_UKNOWN5            FIELD32(0x0000000f)
#define TX_PWR_CFG_4_UKNOWN6            FIELD32(0x000000f0)
#define TX_PWR_CFG_4_UKNOWN7            FIELD32(0x00000f00)
#define TX_PWR_CFG_4_UKNOWN8            FIELD32(0x0000f000)
/* bits for 3T devices */
#define TX_PWR_CFG_4_STBC4_CH0          FIELD32(0x0000000f)
#define TX_PWR_CFG_4_STBC4_CH1          FIELD32(0x000000f0)
#define TX_PWR_CFG_4_STBC6_CH0          FIELD32(0x00000f00)
#define TX_PWR_CFG_4_STBC6_CH1          FIELD32(0x0000f000)
/* bits for new 2T devices */
#define TX_PWR_CFG_4B_STBC_MCS4_MCS5    FIELD32(0x000000ff)
#define TX_PWR_CFG_4B_STBC_MCS6         FIELD32(0x0000ff00)

/*
 * TX_PIN_CFG:
 */
#define TX_PIN_CFG                      0x1328
#define TX_PIN_CFG_PA_PE_DISABLE        0xfcfffff0
#define TX_PIN_CFG_PA_PE_A0_EN          FIELD32(0x00000001)
#define TX_PIN_CFG_PA_PE_G0_EN          FIELD32(0x00000002)
#define TX_PIN_CFG_PA_PE_A1_EN          FIELD32(0x00000004)
#define TX_PIN_CFG_PA_PE_G1_EN          FIELD32(0x00000008)
#define TX_PIN_CFG_PA_PE_A0_POL         FIELD32(0x00000010)
#define TX_PIN_CFG_PA_PE_G0_POL         FIELD32(0x00000020)
#define TX_PIN_CFG_PA_PE_A1_POL         FIELD32(0x00000040)
#define TX_PIN_CFG_PA_PE_G1_POL         FIELD32(0x00000080)
#define TX_PIN_CFG_LNA_PE_A0_EN         FIELD32(0x00000100)
#define TX_PIN_CFG_LNA_PE_G0_EN         FIELD32(0x00000200)
#define TX_PIN_CFG_LNA_PE_A1_EN         FIELD32(0x00000400)
#define TX_PIN_CFG_LNA_PE_G1_EN         FIELD32(0x00000800)
#define TX_PIN_CFG_LNA_PE_A0_POL        FIELD32(0x00001000)
#define TX_PIN_CFG_LNA_PE_G0_POL        FIELD32(0x00002000)
#define TX_PIN_CFG_LNA_PE_A1_POL        FIELD32(0x00004000)
#define TX_PIN_CFG_LNA_PE_G1_POL        FIELD32(0x00008000)
#define TX_PIN_CFG_RFTR_EN              FIELD32(0x00010000)
#define TX_PIN_CFG_RFTR_POL             FIELD32(0x00020000)
#define TX_PIN_CFG_TRSW_EN              FIELD32(0x00040000)
#define TX_PIN_CFG_TRSW_POL             FIELD32(0x00080000)
#define TX_PIN_CFG_RFRX_EN              FIELD32(0x00100000)
#define TX_PIN_CFG_RFRX_POL             FIELD32(0x00200000)
#define TX_PIN_CFG_PA_PE_A2_EN          FIELD32(0x01000000)
#define TX_PIN_CFG_PA_PE_G2_EN          FIELD32(0x02000000)
#define TX_PIN_CFG_PA_PE_A2_POL         FIELD32(0x04000000)
#define TX_PIN_CFG_PA_PE_G2_POL         FIELD32(0x08000000)
#define TX_PIN_CFG_LNA_PE_A2_EN         FIELD32(0x10000000)
#define TX_PIN_CFG_LNA_PE_G2_EN         FIELD32(0x20000000)
#define TX_PIN_CFG_LNA_PE_A2_POL        FIELD32(0x40000000)
#define TX_PIN_CFG_LNA_PE_G2_POL        FIELD32(0x80000000)

/*
 * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
 */
#define TX_BAND_CFG                     0x132c
#define TX_BAND_CFG_HT40_MINUS          FIELD32(0x00000001)
#define TX_BAND_CFG_A                   FIELD32(0x00000002)
#define TX_BAND_CFG_BG                  FIELD32(0x00000004)

/*
 * TX_SW_CFG0:
 */
#define TX_SW_CFG0                      0x1330

/*
 * TX_SW_CFG1:
 */
#define TX_SW_CFG1                      0x1334

/*
 * TX_SW_CFG2:
 */
#define TX_SW_CFG2                      0x1338

/*
 * TXOP_THRES_CFG:
 */
#define TXOP_THRES_CFG                  0x133c

/*
 * TXOP_CTRL_CFG:
 * TIMEOUT_TRUN_EN: Enable/Disable TXOP timeout truncation
 * AC_TRUN_EN: Enable/Disable truncation for AC change
 * TXRATEGRP_TRUN_EN: Enable/Disable truncation for TX rate group change
 * USER_MODE_TRUN_EN: Enable/Disable truncation for user TXOP mode
 * MIMO_PS_TRUN_EN: Enable/Disable truncation for MIMO PS RTS/CTS
 * RESERVED_TRUN_EN: Reserved
 * LSIG_TXOP_EN: Enable/Disable L-SIG TXOP protection
 * EXT_CCA_EN: Enable/Disable extension channel CCA reference (Defer 40Mhz
 *             transmissions if extension CCA is clear).
 * EXT_CCA_DLY: Extension CCA signal delay time (unit: us)
 * EXT_CWMIN: CwMin for extension channel backoff
 *            0: Disabled
 *
 */
#define TXOP_CTRL_CFG                   0x1340
#define TXOP_CTRL_CFG_TIMEOUT_TRUN_EN   FIELD32(0x00000001)
#define TXOP_CTRL_CFG_AC_TRUN_EN        FIELD32(0x00000002)
#define TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN FIELD32(0x00000004)
#define TXOP_CTRL_CFG_USER_MODE_TRUN_EN FIELD32(0x00000008)
#define TXOP_CTRL_CFG_MIMO_PS_TRUN_EN   FIELD32(0x00000010)
#define TXOP_CTRL_CFG_RESERVED_TRUN_EN  FIELD32(0x00000020)
#define TXOP_CTRL_CFG_LSIG_TXOP_EN      FIELD32(0x00000040)
#define TXOP_CTRL_CFG_EXT_CCA_EN        FIELD32(0x00000080)
#define TXOP_CTRL_CFG_EXT_CCA_DLY       FIELD32(0x0000ff00)
#define TXOP_CTRL_CFG_EXT_CWMIN         FIELD32(0x000f0000)

/*
 * TX_RTS_CFG:
 * RTS_THRES: unit:byte
 * RTS_FBK_EN: enable rts rate fallback
 */
#define TX_RTS_CFG                      0x1344
#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff)
#define TX_RTS_CFG_RTS_THRES            FIELD32(0x00ffff00)
#define TX_RTS_CFG_RTS_FBK_EN           FIELD32(0x01000000)

/*
 * TX_TIMEOUT_CFG:
 * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
 * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
 * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
 *                it is recommended that:
 *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
 */
#define TX_TIMEOUT_CFG                  0x1348
#define TX_TIMEOUT_CFG_MPDU_LIFETIME    FIELD32(0x000000f0)
#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT   FIELD32(0x0000ff00)
#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT    FIELD32(0x00ff0000)

/*
 * TX_RTY_CFG:
 * SHORT_RTY_LIMIT: short retry limit
 * LONG_RTY_LIMIT: long retry limit
 * LONG_RTY_THRE: Long retry threshoold
 * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
 *                   0:expired by retry limit, 1: expired by mpdu life timer
 * AGG_RTY_MODE: Aggregate MPDU retry mode
 *               0:expired by retry limit, 1: expired by mpdu life timer
 * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
 */
#define TX_RTY_CFG                      0x134c
#define TX_RTY_CFG_SHORT_RTY_LIMIT      FIELD32(0x000000ff)
#define TX_RTY_CFG_LONG_RTY_LIMIT       FIELD32(0x0000ff00)
#define TX_RTY_CFG_LONG_RTY_THRE        FIELD32(0x0fff0000)
#define TX_RTY_CFG_NON_AGG_RTY_MODE     FIELD32(0x10000000)
#define TX_RTY_CFG_AGG_RTY_MODE         FIELD32(0x20000000)
#define TX_RTY_CFG_TX_AUTO_FB_ENABLE    FIELD32(0x40000000)

/*
 * TX_LINK_CFG:
 * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
 * MFB_ENABLE: TX apply remote MFB 1:enable
 * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
 *                     0: not apply remote remote unsolicit (MFS=7)
 * TX_MRQ_EN: MCS request TX enable
 * TX_RDG_EN: RDG TX enable
 * TX_CF_ACK_EN: Piggyback CF-ACK enable
 * REMOTE_MFB: remote MCS feedback
 * REMOTE_MFS: remote MCS feedback sequence number
 */
#define TX_LINK_CFG                     0x1350
#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff)
#define TX_LINK_CFG_MFB_ENABLE          FIELD32(0x00000100)
#define TX_LINK_CFG_REMOTE_UMFS_ENABLE  FIELD32(0x00000200)
#define TX_LINK_CFG_TX_MRQ_EN           FIELD32(0x00000400)
#define TX_LINK_CFG_TX_RDG_EN           FIELD32(0x00000800)
#define TX_LINK_CFG_TX_CF_ACK_EN        FIELD32(0x00001000)
#define TX_LINK_CFG_REMOTE_MFB          FIELD32(0x00ff0000)
#define TX_LINK_CFG_REMOTE_MFS          FIELD32(0xff000000)

/*
 * HT_FBK_CFG0:
 */
#define HT_FBK_CFG0                     0x1354
#define HT_FBK_CFG0_HTMCS0FBK           FIELD32(0x0000000f)
#define HT_FBK_CFG0_HTMCS1FBK           FIELD32(0x000000f0)
#define HT_FBK_CFG0_HTMCS2FBK           FIELD32(0x00000f00)
#define HT_FBK_CFG0_HTMCS3FBK           FIELD32(0x0000f000)
#define HT_FBK_CFG0_HTMCS4FBK           FIELD32(0x000f0000)
#define HT_FBK_CFG0_HTMCS5FBK           FIELD32(0x00f00000)
#define HT_FBK_CFG0_HTMCS6FBK           FIELD32(0x0f000000)
#define HT_FBK_CFG0_HTMCS7FBK           FIELD32(0xf0000000)

/*
 * HT_FBK_CFG1:
 */
#define HT_FBK_CFG1                     0x1358
#define HT_FBK_CFG1_HTMCS8FBK           FIELD32(0x0000000f)
#define HT_FBK_CFG1_HTMCS9FBK           FIELD32(0x000000f0)
#define HT_FBK_CFG1_HTMCS10FBK          FIELD32(0x00000f00)
#define HT_FBK_CFG1_HTMCS11FBK          FIELD32(0x0000f000)
#define HT_FBK_CFG1_HTMCS12FBK          FIELD32(0x000f0000)
#define HT_FBK_CFG1_HTMCS13FBK          FIELD32(0x00f00000)
#define HT_FBK_CFG1_HTMCS14FBK          FIELD32(0x0f000000)
#define HT_FBK_CFG1_HTMCS15FBK          FIELD32(0xf0000000)

/*
 * LG_FBK_CFG0:
 */
#define LG_FBK_CFG0                     0x135c
#define LG_FBK_CFG0_OFDMMCS0FBK         FIELD32(0x0000000f)
#define LG_FBK_CFG0_OFDMMCS1FBK         FIELD32(0x000000f0)
#define LG_FBK_CFG0_OFDMMCS2FBK         FIELD32(0x00000f00)
#define LG_FBK_CFG0_OFDMMCS3FBK         FIELD32(0x0000f000)
#define LG_FBK_CFG0_OFDMMCS4FBK         FIELD32(0x000f0000)
#define LG_FBK_CFG0_OFDMMCS5FBK         FIELD32(0x00f00000)
#define LG_FBK_CFG0_OFDMMCS6FBK         FIELD32(0x0f000000)
#define LG_FBK_CFG0_OFDMMCS7FBK         FIELD32(0xf0000000)

/*
 * LG_FBK_CFG1:
 */
#define LG_FBK_CFG1                     0x1360
#define LG_FBK_CFG0_CCKMCS0FBK          FIELD32(0x0000000f)
#define LG_FBK_CFG0_CCKMCS1FBK          FIELD32(0x000000f0)
#define LG_FBK_CFG0_CCKMCS2FBK          FIELD32(0x00000f00)
#define LG_FBK_CFG0_CCKMCS3FBK          FIELD32(0x0000f000)

/*
 * CCK_PROT_CFG: CCK Protection
 * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
 * PROTECT_CTRL: Protection control frame type for CCK TX
 *               0:none, 1:RTS/CTS, 2:CTS-to-self
 * PROTECT_NAV_SHORT: TXOP protection type for CCK TX with short NAV
 * PROTECT_NAV_LONG: TXOP protection type for CCK TX with long NAV
 * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
 * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
 * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
 * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
 * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
 * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
 * RTS_TH_EN: RTS threshold enable on CCK TX
 */
#define CCK_PROT_CFG                    0x1364
#define CCK_PROT_CFG_PROTECT_RATE       FIELD32(0x0000ffff)
#define CCK_PROT_CFG_PROTECT_CTRL       FIELD32(0x00030000)
#define CCK_PROT_CFG_PROTECT_NAV_SHORT  FIELD32(0x00040000)
#define CCK_PROT_CFG_PROTECT_NAV_LONG   FIELD32(0x00080000)
#define CCK_PROT_CFG_TX_OP_ALLOW_CCK    FIELD32(0x00100000)
#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM   FIELD32(0x00200000)
#define CCK_PROT_CFG_TX_OP_ALLOW_MM20   FIELD32(0x00400000)
#define CCK_PROT_CFG_TX_OP_ALLOW_MM40   FIELD32(0x00800000)
#define CCK_PROT_CFG_TX_OP_ALLOW_GF20   FIELD32(0x01000000)
#define CCK_PROT_CFG_TX_OP_ALLOW_GF40   FIELD32(0x02000000)
#define CCK_PROT_CFG_RTS_TH_EN          FIELD32(0x04000000)

/*
 * OFDM_PROT_CFG: OFDM Protection
 */
#define OFDM_PROT_CFG                   0x1368
#define OFDM_PROT_CFG_PROTECT_RATE      FIELD32(0x0000ffff)
#define OFDM_PROT_CFG_PROTECT_CTRL      FIELD32(0x00030000)
#define OFDM_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define OFDM_PROT_CFG_PROTECT_NAV_LONG  FIELD32(0x00080000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK   FIELD32(0x00100000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM  FIELD32(0x00200000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20  FIELD32(0x00400000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40  FIELD32(0x00800000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20  FIELD32(0x01000000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40  FIELD32(0x02000000)
#define OFDM_PROT_CFG_RTS_TH_EN         FIELD32(0x04000000)

/*
 * MM20_PROT_CFG: MM20 Protection
 */
#define MM20_PROT_CFG                   0x136c
#define MM20_PROT_CFG_PROTECT_RATE      FIELD32(0x0000ffff)
#define MM20_PROT_CFG_PROTECT_CTRL      FIELD32(0x00030000)
#define MM20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define MM20_PROT_CFG_PROTECT_NAV_LONG  FIELD32(0x00080000)
#define MM20_PROT_CFG_TX_OP_ALLOW_CCK   FIELD32(0x00100000)
#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM  FIELD32(0x00200000)
#define MM20_PROT_CFG_TX_OP_ALLOW_MM20  FIELD32(0x00400000)
#define MM20_PROT_CFG_TX_OP_ALLOW_MM40  FIELD32(0x00800000)
#define MM20_PROT_CFG_TX_OP_ALLOW_GF20  FIELD32(0x01000000)
#define MM20_PROT_CFG_TX_OP_ALLOW_GF40  FIELD32(0x02000000)
#define MM20_PROT_CFG_RTS_TH_EN         FIELD32(0x04000000)

/*
 * MM40_PROT_CFG: MM40 Protection
 */
#define MM40_PROT_CFG                   0x1370
#define MM40_PROT_CFG_PROTECT_RATE      FIELD32(0x0000ffff)
#define MM40_PROT_CFG_PROTECT_CTRL      FIELD32(0x00030000)
#define MM40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define MM40_PROT_CFG_PROTECT_NAV_LONG  FIELD32(0x00080000)
#define MM40_PROT_CFG_TX_OP_ALLOW_CCK   FIELD32(0x00100000)
#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM  FIELD32(0x00200000)
#define MM40_PROT_CFG_TX_OP_ALLOW_MM20  FIELD32(0x00400000)
#define MM40_PROT_CFG_TX_OP_ALLOW_MM40  FIELD32(0x00800000)
#define MM40_PROT_CFG_TX_OP_ALLOW_GF20  FIELD32(0x01000000)
#define MM40_PROT_CFG_TX_OP_ALLOW_GF40  FIELD32(0x02000000)
#define MM40_PROT_CFG_RTS_TH_EN         FIELD32(0x04000000)

/*
 * GF20_PROT_CFG: GF20 Protection
 */
#define GF20_PROT_CFG                   0x1374
#define GF20_PROT_CFG_PROTECT_RATE      FIELD32(0x0000ffff)
#define GF20_PROT_CFG_PROTECT_CTRL      FIELD32(0x00030000)
#define GF20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define GF20_PROT_CFG_PROTECT_NAV_LONG  FIELD32(0x00080000)
#define GF20_PROT_CFG_TX_OP_ALLOW_CCK   FIELD32(0x00100000)
#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM  FIELD32(0x00200000)
#define GF20_PROT_CFG_TX_OP_ALLOW_MM20  FIELD32(0x00400000)
#define GF20_PROT_CFG_TX_OP_ALLOW_MM40  FIELD32(0x00800000)
#define GF20_PROT_CFG_TX_OP_ALLOW_GF20  FIELD32(0x01000000)
#define GF20_PROT_CFG_TX_OP_ALLOW_GF40  FIELD32(0x02000000)
#define GF20_PROT_CFG_RTS_TH_EN         FIELD32(0x04000000)

/*
 * GF40_PROT_CFG: GF40 Protection
 */
#define GF40_PROT_CFG                   0x1378
#define GF40_PROT_CFG_PROTECT_RATE      FIELD32(0x0000ffff)
#define GF40_PROT_CFG_PROTECT_CTRL      FIELD32(0x00030000)
#define GF40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define GF40_PROT_CFG_PROTECT_NAV_LONG  FIELD32(0x00080000)
#define GF40_PROT_CFG_TX_OP_ALLOW_CCK   FIELD32(0x00100000)
#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM  FIELD32(0x00200000)
#define GF40_PROT_CFG_TX_OP_ALLOW_MM20  FIELD32(0x00400000)
#define GF40_PROT_CFG_TX_OP_ALLOW_MM40  FIELD32(0x00800000)
#define GF40_PROT_CFG_TX_OP_ALLOW_GF20  FIELD32(0x01000000)
#define GF40_PROT_CFG_TX_OP_ALLOW_GF40  FIELD32(0x02000000)
#define GF40_PROT_CFG_RTS_TH_EN         FIELD32(0x04000000)

/*
 * EXP_CTS_TIME:
 */
#define EXP_CTS_TIME                    0x137c

/*
 * EXP_ACK_TIME:
 */
#define EXP_ACK_TIME                    0x1380

/* TX_PWR_CFG_5 */
#define TX_PWR_CFG_5                    0x1384
#define TX_PWR_CFG_5_MCS16_CH0          FIELD32(0x0000000f)
#define TX_PWR_CFG_5_MCS16_CH1          FIELD32(0x000000f0)
#define TX_PWR_CFG_5_MCS16_CH2          FIELD32(0x00000f00)
#define TX_PWR_CFG_5_MCS18_CH0          FIELD32(0x000f0000)
#define TX_PWR_CFG_5_MCS18_CH1          FIELD32(0x00f00000)
#define TX_PWR_CFG_5_MCS18_CH2          FIELD32(0x0f000000)

/* TX_PWR_CFG_6 */
#define TX_PWR_CFG_6                    0x1388
#define TX_PWR_CFG_6_MCS20_CH0          FIELD32(0x0000000f)
#define TX_PWR_CFG_6_MCS20_CH1          FIELD32(0x000000f0)
#define TX_PWR_CFG_6_MCS20_CH2          FIELD32(0x00000f00)
#define TX_PWR_CFG_6_MCS22_CH0          FIELD32(0x000f0000)
#define TX_PWR_CFG_6_MCS22_CH1          FIELD32(0x00f00000)
#define TX_PWR_CFG_6_MCS22_CH2          FIELD32(0x0f000000)

/* TX_PWR_CFG_0_EXT */
#define TX_PWR_CFG_0_EXT                0x1390
#define TX_PWR_CFG_0_EXT_CCK1_CH2       FIELD32(0x0000000f)
#define TX_PWR_CFG_0_EXT_CCK5_CH2       FIELD32(0x00000f00)
#define TX_PWR_CFG_0_EXT_OFDM6_CH2      FIELD32(0x000f0000)
#define TX_PWR_CFG_0_EXT_OFDM12_CH2     FIELD32(0x0f000000)

/* TX_PWR_CFG_1_EXT */
#define TX_PWR_CFG_1_EXT                0x1394
#define TX_PWR_CFG_1_EXT_OFDM24_CH2     FIELD32(0x0000000f)
#define TX_PWR_CFG_1_EXT_OFDM48_CH2     FIELD32(0x00000f00)
#define TX_PWR_CFG_1_EXT_MCS0_CH2       FIELD32(0x000f0000)
#define TX_PWR_CFG_1_EXT_MCS2_CH2       FIELD32(0x0f000000)

/* TX_PWR_CFG_2_EXT */
#define TX_PWR_CFG_2_EXT                0x1398
#define TX_PWR_CFG_2_EXT_MCS4_CH2       FIELD32(0x0000000f)
#define TX_PWR_CFG_2_EXT_MCS6_CH2       FIELD32(0x00000f00)
#define TX_PWR_CFG_2_EXT_MCS8_CH2       FIELD32(0x000f0000)
#define TX_PWR_CFG_2_EXT_MCS10_CH2      FIELD32(0x0f000000)

/* TX_PWR_CFG_3_EXT */
#define TX_PWR_CFG_3_EXT                0x139c
#define TX_PWR_CFG_3_EXT_MCS12_CH2      FIELD32(0x0000000f)
#define TX_PWR_CFG_3_EXT_MCS14_CH2      FIELD32(0x00000f00)
#define TX_PWR_CFG_3_EXT_STBC0_CH2      FIELD32(0x000f0000)
#define TX_PWR_CFG_3_EXT_STBC2_CH2      FIELD32(0x0f000000)

/* TX_PWR_CFG_4_EXT */
#define TX_PWR_CFG_4_EXT                0x13a0
#define TX_PWR_CFG_4_EXT_STBC4_CH2      FIELD32(0x0000000f)
#define TX_PWR_CFG_4_EXT_STBC6_CH2      FIELD32(0x00000f00)

/* TXn_RF_GAIN_CORRECT: RF Gain Correction for each RF_ALC[3:2]
 * Unit: 0.1 dB, Range: -3.2 dB to 3.1 dB
 */
#define TX0_RF_GAIN_CORRECT             0x13a0
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f)
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00)
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000)
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000)

#define TX1_RF_GAIN_CORRECT             0x13a4
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f)
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00)
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000)
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000)

/* TXn_RF_GAIN_ATTEN: TXn RF Gain Attenuation Level
 * Format: 7-bit, signed value
 * Unit: 0.5 dB, Range: -20 dB to -5 dB
 */
#define TX0_RF_GAIN_ATTEN               0x13a8
#define TX0_RF_GAIN_ATTEN_LEVEL_0       FIELD32(0x0000007f)
#define TX0_RF_GAIN_ATTEN_LEVEL_1       FIELD32(0x00007f00)
#define TX0_RF_GAIN_ATTEN_LEVEL_2       FIELD32(0x007f0000)
#define TX0_RF_GAIN_ATTEN_LEVEL_3       FIELD32(0x7f000000)
#define TX1_RF_GAIN_ATTEN               0x13ac
#define TX1_RF_GAIN_ATTEN_LEVEL_0       FIELD32(0x0000007f)
#define TX1_RF_GAIN_ATTEN_LEVEL_1       FIELD32(0x00007f00)
#define TX1_RF_GAIN_ATTEN_LEVEL_2       FIELD32(0x007f0000)
#define TX1_RF_GAIN_ATTEN_LEVEL_3       FIELD32(0x7f000000)

/* TX_ALC_CFG_0: TX Automatic Level Control Configuration 0
 * TX_ALC_LIMIT_n: TXn upper limit
 * TX_ALC_CH_INIT_n: TXn channel initial transmission gain
 * Unit: 0.5 dB, Range: 0 to 23.5 dB
 */
#define TX_ALC_CFG_0                    0x13b0
#define TX_ALC_CFG_0_CH_INIT_0          FIELD32(0x0000003f)
#define TX_ALC_CFG_0_CH_INIT_1          FIELD32(0x00003f00)
#define TX_ALC_CFG_0_LIMIT_0            FIELD32(0x003f0000)
#define TX_ALC_CFG_0_LIMIT_1            FIELD32(0x3f000000)

/* TX_ALC_CFG_1: TX Automatic Level Control Configuration 1
 * TX_TEMP_COMP:      TX Power Temperature Compensation
 *                    Unit: 0.5 dB, Range: -10 dB to 10 dB
 * TXn_GAIN_FINE:     TXn Gain Fine Adjustment
 *                    Unit: 0.1 dB, Range: -0.8 dB to 0.7 dB
 * RF_TOS_DLY:        Sets the RF_TOS_EN assertion delay after
 *                    deassertion of PA_PE.
 *                    Unit: 0.25 usec
 * TXn_RF_GAIN_ATTEN: TXn RF gain attentuation selector
 * RF_TOS_TIMEOUT:    time-out value for RF_TOS_ENABLE
 *                    deassertion if RF_TOS_DONE is missing.
 *                    Unit: 0.25 usec
 * RF_TOS_ENABLE:     TX offset calibration enable
 * ROS_BUSY_EN:       RX offset calibration busy enable
 */
#define TX_ALC_CFG_1                    0x13b4
#define TX_ALC_CFG_1_TX_TEMP_COMP       FIELD32(0x0000003f)
#define TX_ALC_CFG_1_TX0_GAIN_FINE      FIELD32(0x00000f00)
#define TX_ALC_CFG_1_TX1_GAIN_FINE      FIELD32(0x0000f000)
#define TX_ALC_CFG_1_RF_TOS_DLY         FIELD32(0x00070000)
#define TX_ALC_CFG_1_TX0_RF_GAIN_ATTEN  FIELD32(0x00300000)
#define TX_ALC_CFG_1_TX1_RF_GAIN_ATTEN  FIELD32(0x00c00000)
#define TX_ALC_CFG_1_RF_TOS_TIMEOUT     FIELD32(0x3f000000)
#define TX_ALC_CFG_1_RF_TOS_ENABLE      FIELD32(0x40000000)
#define TX_ALC_CFG_1_ROS_BUSY_EN        FIELD32(0x80000000)

/* TXn_BB_GAIN_ATTEN: TXn RF Gain Attenuation Level
 * Format: 5-bit signed values
 * Unit: 0.5 dB, Range: -8 dB to 7 dB
 */
#define TX0_BB_GAIN_ATTEN               0x13c0
#define TX0_BB_GAIN_ATTEN_LEVEL_0       FIELD32(0x0000001f)
#define TX0_BB_GAIN_ATTEN_LEVEL_1       FIELD32(0x00001f00)
#define TX0_BB_GAIN_ATTEN_LEVEL_2       FIELD32(0x001f0000)
#define TX0_BB_GAIN_ATTEN_LEVEL_3       FIELD32(0x1f000000)
#define TX1_BB_GAIN_ATTEN               0x13c4
#define TX1_BB_GAIN_ATTEN_LEVEL_0       FIELD32(0x0000001f)
#define TX1_BB_GAIN_ATTEN_LEVEL_1       FIELD32(0x00001f00)
#define TX1_BB_GAIN_ATTEN_LEVEL_2       FIELD32(0x001f0000)
#define TX1_BB_GAIN_ATTEN_LEVEL_3       FIELD32(0x1f000000)

/* TX_ALC_VGA3: TX Automatic Level Correction Variable Gain Amplifier 3 */
#define TX_ALC_VGA3                     0x13c8
#define TX_ALC_VGA3_TX0_ALC_VGA3        FIELD32(0x0000001f)
#define TX_ALC_VGA3_TX1_ALC_VGA3        FIELD32(0x00001f00)
#define TX_ALC_VGA3_TX0_ALC_VGA2        FIELD32(0x001f0000)
#define TX_ALC_VGA3_TX1_ALC_VGA2        FIELD32(0x1f000000)

/* TX_PWR_CFG_7 */
#define TX_PWR_CFG_7                    0x13d4
#define TX_PWR_CFG_7_OFDM54_CH0         FIELD32(0x0000000f)
#define TX_PWR_CFG_7_OFDM54_CH1         FIELD32(0x000000f0)
#define TX_PWR_CFG_7_OFDM54_CH2         FIELD32(0x00000f00)
#define TX_PWR_CFG_7_MCS7_CH0           FIELD32(0x000f0000)
#define TX_PWR_CFG_7_MCS7_CH1           FIELD32(0x00f00000)
#define TX_PWR_CFG_7_MCS7_CH2           FIELD32(0x0f000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_7B_54MBS             FIELD32(0x000000ff)
#define TX_PWR_CFG_7B_MCS7              FIELD32(0x00ff0000)


/* TX_PWR_CFG_8 */
#define TX_PWR_CFG_8                    0x13d8
#define TX_PWR_CFG_8_MCS15_CH0          FIELD32(0x0000000f)
#define TX_PWR_CFG_8_MCS15_CH1          FIELD32(0x000000f0)
#define TX_PWR_CFG_8_MCS15_CH2          FIELD32(0x00000f00)
#define TX_PWR_CFG_8_MCS23_CH0          FIELD32(0x000f0000)
#define TX_PWR_CFG_8_MCS23_CH1          FIELD32(0x00f00000)
#define TX_PWR_CFG_8_MCS23_CH2          FIELD32(0x0f000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_8B_MCS15             FIELD32(0x000000ff)


/* TX_PWR_CFG_9 */
#define TX_PWR_CFG_9                    0x13dc
#define TX_PWR_CFG_9_STBC7_CH0          FIELD32(0x0000000f)
#define TX_PWR_CFG_9_STBC7_CH1          FIELD32(0x000000f0)
#define TX_PWR_CFG_9_STBC7_CH2          FIELD32(0x00000f00)
/* bits for new 2T devices */
#define TX_PWR_CFG_9B_STBC_MCS7         FIELD32(0x000000ff)

/*
 * RX_FILTER_CFG: RX configuration register.
 */
#define RX_FILTER_CFG                   0x1400
#define RX_FILTER_CFG_DROP_CRC_ERROR    FIELD32(0x00000001)
#define RX_FILTER_CFG_DROP_PHY_ERROR    FIELD32(0x00000002)
#define RX_FILTER_CFG_DROP_NOT_TO_ME    FIELD32(0x00000004)
#define RX_FILTER_CFG_DROP_NOT_MY_BSSD  FIELD32(0x00000008)
#define RX_FILTER_CFG_DROP_VER_ERROR    FIELD32(0x00000010)
#define RX_FILTER_CFG_DROP_MULTICAST    FIELD32(0x00000020)
#define RX_FILTER_CFG_DROP_BROADCAST    FIELD32(0x00000040)
#define RX_FILTER_CFG_DROP_DUPLICATE    FIELD32(0x00000080)
#define RX_FILTER_CFG_DROP_CF_END_ACK   FIELD32(0x00000100)
#define RX_FILTER_CFG_DROP_CF_END       FIELD32(0x00000200)
#define RX_FILTER_CFG_DROP_ACK          FIELD32(0x00000400)
#define RX_FILTER_CFG_DROP_CTS          FIELD32(0x00000800)
#define RX_FILTER_CFG_DROP_RTS          FIELD32(0x00001000)
#define RX_FILTER_CFG_DROP_PSPOLL       FIELD32(0x00002000)
#define RX_FILTER_CFG_DROP_BA           FIELD32(0x00004000)
#define RX_FILTER_CFG_DROP_BAR          FIELD32(0x00008000)
#define RX_FILTER_CFG_DROP_CNTL         FIELD32(0x00010000)

/*
 * AUTO_RSP_CFG:
 * AUTORESPONDER: 0: disable, 1: enable
 * BAC_ACK_POLICY: 0:long, 1:short preamble
 * CTS_40_MMODE: Response CTS 40MHz duplicate mode
 * CTS_40_MREF: Response CTS 40MHz duplicate mode
 * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
 * DUAL_CTS_EN: Power bit value in control frame
 * ACK_CTS_PSM_BIT:Power bit value in control frame
 */
#define AUTO_RSP_CFG                    0x1404
#define AUTO_RSP_CFG_AUTORESPONDER      FIELD32(0x00000001)
#define AUTO_RSP_CFG_BAC_ACK_POLICY     FIELD32(0x00000002)
#define AUTO_RSP_CFG_CTS_40_MMODE       FIELD32(0x00000004)
#define AUTO_RSP_CFG_CTS_40_MREF        FIELD32(0x00000008)
#define AUTO_RSP_CFG_AR_PREAMBLE        FIELD32(0x00000010)
#define AUTO_RSP_CFG_DUAL_CTS_EN        FIELD32(0x00000040)
#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT    FIELD32(0x00000080)

/*
 * LEGACY_BASIC_RATE:
 */
#define LEGACY_BASIC_RATE               0x1408

/*
 * HT_BASIC_RATE:
 */
#define HT_BASIC_RATE                   0x140c

/*
 * HT_CTRL_CFG:
 */
#define HT_CTRL_CFG                     0x1410

/*
 * SIFS_COST_CFG:
 */
#define SIFS_COST_CFG                   0x1414

/*
 * RX_PARSER_CFG:
 * Set NAV for all received frames
 */
#define RX_PARSER_CFG                   0x1418

/*
 * TX_SEC_CNT0:
 */
#define TX_SEC_CNT0                     0x1500

/*
 * RX_SEC_CNT0:
 */
#define RX_SEC_CNT0                     0x1504

/*
 * CCMP_FC_MUTE:
 */
#define CCMP_FC_MUTE                    0x1508

/*
 * TXOP_HLDR_ADDR0:
 */
#define TXOP_HLDR_ADDR0                 0x1600

/*
 * TXOP_HLDR_ADDR1:
 */
#define TXOP_HLDR_ADDR1                 0x1604

/*
 * TXOP_HLDR_ET:
 */
#define TXOP_HLDR_ET                    0x1608

/*
 * QOS_CFPOLL_RA_DW0:
 */
#define QOS_CFPOLL_RA_DW0               0x160c

/*
 * QOS_CFPOLL_RA_DW1:
 */
#define QOS_CFPOLL_RA_DW1               0x1610

/*
 * QOS_CFPOLL_QC:
 */
#define QOS_CFPOLL_QC                   0x1614

/*
 * RX_STA_CNT0: RX PLCP error count & RX CRC error count
 */
#define RX_STA_CNT0                     0x1700
#define RX_STA_CNT0_CRC_ERR             FIELD32(0x0000ffff)
#define RX_STA_CNT0_PHY_ERR             FIELD32(0xffff0000)

/*
 * RX_STA_CNT1: RX False CCA count & RX LONG frame count
 */
#define RX_STA_CNT1                     0x1704
#define RX_STA_CNT1_FALSE_CCA           FIELD32(0x0000ffff)
#define RX_STA_CNT1_PLCP_ERR            FIELD32(0xffff0000)

/*
 * RX_STA_CNT2:
 */
#define RX_STA_CNT2                     0x1708
#define RX_STA_CNT2_RX_DUPLI_COUNT      FIELD32(0x0000ffff)
#define RX_STA_CNT2_RX_FIFO_OVERFLOW    FIELD32(0xffff0000)

/*
 * TX_STA_CNT0: TX Beacon count
 */
#define TX_STA_CNT0                     0x170c
#define TX_STA_CNT0_TX_FAIL_COUNT       FIELD32(0x0000ffff)
#define TX_STA_CNT0_TX_BEACON_COUNT     FIELD32(0xffff0000)

/*
 * TX_STA_CNT1: TX tx count
 */
#define TX_STA_CNT1                     0x1710
#define TX_STA_CNT1_TX_SUCCESS          FIELD32(0x0000ffff)
#define TX_STA_CNT1_TX_RETRANSMIT       FIELD32(0xffff0000)

/*
 * TX_STA_CNT2: TX tx count
 */
#define TX_STA_CNT2                     0x1714
#define TX_STA_CNT2_TX_ZERO_LEN_COUNT   FIELD32(0x0000ffff)
#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)

/*
 * TX_STA_FIFO: TX Result for specific PID status fifo register.
 *
 * This register is implemented as FIFO with 16 entries in the HW. Each
 * register read fetches the next tx result. If the FIFO is full because
 * it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS)
 * triggered, the hw seems to simply drop further tx results.
 *
 * VALID: 1: this tx result is valid
 *        0: no valid tx result -> driver should stop reading
 * PID_TYPE: The PID latched from the PID field in the TXWI, can be used
 *           to match a frame with its tx result (even though the PID is
 *           only 4 bits wide).
 * PID_QUEUE: Part of PID_TYPE, this is the queue index number (0-3)
 * PID_ENTRY: Part of PID_TYPE, this is the queue entry index number (1-3)
 *            This identification number is calculated by ((idx % 3) + 1).
 * TX_SUCCESS: Indicates tx success (1) or failure (0)
 * TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0)
 * TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0)
 * WCID: The wireless client ID.
 * MCS: The tx rate used during the last transmission of this frame, be it
 *      successful or not.
 * PHYMODE: The phymode used for the transmission.
 */
#define TX_STA_FIFO                     0x1718
#define TX_STA_FIFO_VALID               FIELD32(0x00000001)
#define TX_STA_FIFO_PID_TYPE            FIELD32(0x0000001e)
#define TX_STA_FIFO_PID_QUEUE           FIELD32(0x00000006)
#define TX_STA_FIFO_PID_ENTRY           FIELD32(0x00000018)
#define TX_STA_FIFO_TX_SUCCESS          FIELD32(0x00000020)
#define TX_STA_FIFO_TX_AGGRE            FIELD32(0x00000040)
#define TX_STA_FIFO_TX_ACK_REQUIRED     FIELD32(0x00000080)
#define TX_STA_FIFO_WCID                FIELD32(0x0000ff00)
#define TX_STA_FIFO_SUCCESS_RATE        FIELD32(0xffff0000)
#define TX_STA_FIFO_MCS                 FIELD32(0x007f0000)
#define TX_STA_FIFO_BW                  FIELD32(0x00800000)
#define TX_STA_FIFO_SGI                 FIELD32(0x01000000)
#define TX_STA_FIFO_PHYMODE             FIELD32(0xc0000000)

/*
 * TX_AGG_CNT: Debug counter
 */
#define TX_AGG_CNT                      0x171c
#define TX_AGG_CNT_NON_AGG_TX_COUNT     FIELD32(0x0000ffff)
#define TX_AGG_CNT_AGG_TX_COUNT         FIELD32(0xffff0000)

/*
 * TX_AGG_CNT0:
 */
#define TX_AGG_CNT0                     0x1720
#define TX_AGG_CNT0_AGG_SIZE_1_COUNT    FIELD32(0x0000ffff)
#define TX_AGG_CNT0_AGG_SIZE_2_COUNT    FIELD32(0xffff0000)

/*
 * TX_AGG_CNT1:
 */
#define TX_AGG_CNT1                     0x1724
#define TX_AGG_CNT1_AGG_SIZE_3_COUNT    FIELD32(0x0000ffff)
#define TX_AGG_CNT1_AGG_SIZE_4_COUNT    FIELD32(0xffff0000)

/*
 * TX_AGG_CNT2:
 */
#define TX_AGG_CNT2                     0x1728
#define TX_AGG_CNT2_AGG_SIZE_5_COUNT    FIELD32(0x0000ffff)
#define TX_AGG_CNT2_AGG_SIZE_6_COUNT    FIELD32(0xffff0000)

/*
 * TX_AGG_CNT3:
 */
#define TX_AGG_CNT3                     0x172c
#define TX_AGG_CNT3_AGG_SIZE_7_COUNT    FIELD32(0x0000ffff)
#define TX_AGG_CNT3_AGG_SIZE_8_COUNT    FIELD32(0xffff0000)

/*
 * TX_AGG_CNT4:
 */
#define TX_AGG_CNT4                     0x1730
#define TX_AGG_CNT4_AGG_SIZE_9_COUNT    FIELD32(0x0000ffff)
#define TX_AGG_CNT4_AGG_SIZE_10_COUNT   FIELD32(0xffff0000)

/*
 * TX_AGG_CNT5:
 */
#define TX_AGG_CNT5                     0x1734
#define TX_AGG_CNT5_AGG_SIZE_11_COUNT   FIELD32(0x0000ffff)
#define TX_AGG_CNT5_AGG_SIZE_12_COUNT   FIELD32(0xffff0000)

/*
 * TX_AGG_CNT6:
 */
#define TX_AGG_CNT6                     0x1738
#define TX_AGG_CNT6_AGG_SIZE_13_COUNT   FIELD32(0x0000ffff)
#define TX_AGG_CNT6_AGG_SIZE_14_COUNT   FIELD32(0xffff0000)

/*
 * TX_AGG_CNT7:
 */
#define TX_AGG_CNT7                     0x173c
#define TX_AGG_CNT7_AGG_SIZE_15_COUNT   FIELD32(0x0000ffff)
#define TX_AGG_CNT7_AGG_SIZE_16_COUNT   FIELD32(0xffff0000)

/*
 * MPDU_DENSITY_CNT:
 * TX_ZERO_DEL: TX zero length delimiter count
 * RX_ZERO_DEL: RX zero length delimiter count
 */
#define MPDU_DENSITY_CNT                0x1740
#define MPDU_DENSITY_CNT_TX_ZERO_DEL    FIELD32(0x0000ffff)
#define MPDU_DENSITY_CNT_RX_ZERO_DEL    FIELD32(0xffff0000)

/*
 * Security key table memory.
 *
 * The pairwise key table shares some memory with the beacon frame
 * buffers 6 and 7. That basically means that when beacon 6 & 7
 * are used we should only use the reduced pairwise key table which
 * has a maximum of 222 entries.
 *
 * ---------------------------------------------

 * |0x4000 | Pairwise Key   | Reduced Pairwise |
 * |       | Table          | Key Table        |
 * |       | Size: 256 * 32 | Size: 222 * 32   |
 * |0x5BC0 |                |-------------------
 * |       |                | Beacon 6         |
 * |0x5DC0 |                |-------------------
 * |       |                | Beacon 7         |
 * |0x5FC0 |                |-------------------
 * |0x5FFF |                |
 * --------------------------
 *
 * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
 * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
 * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
 * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
 * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
 * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
 */
#define MAC_WCID_BASE                   0x1800
#define PAIRWISE_KEY_TABLE_BASE         0x4000
#define MAC_IVEIV_TABLE_BASE            0x6000
#define MAC_WCID_ATTRIBUTE_BASE         0x6800
#define SHARED_KEY_TABLE_BASE           0x6c00
#define SHARED_KEY_MODE_BASE            0x7000

#define MAC_WCID_ENTRY(__idx) \
        (MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)))
#define PAIRWISE_KEY_ENTRY(__idx) \
        (PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)))
#define MAC_IVEIV_ENTRY(__idx) \
        (MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)))
#define MAC_WCID_ATTR_ENTRY(__idx) \
        (MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)))
#define SHARED_KEY_ENTRY(__idx) \
        (SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)))
#define SHARED_KEY_MODE_ENTRY(__idx) \
        (SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)))

struct mac_wcid_entry {
        u8 mac[6];
        u8 reserved[2];
} __packed;

struct hw_key_entry {
        u8 key[16];
        u8 tx_mic[8];
        u8 rx_mic[8];
} __packed;

struct mac_iveiv_entry {
        u8 iv[8];
} __packed;

/*
 * MAC_WCID_ATTRIBUTE:
 */
#define MAC_WCID_ATTRIBUTE_KEYTAB       FIELD32(0x00000001)
#define MAC_WCID_ATTRIBUTE_CIPHER       FIELD32(0x0000000e)
#define MAC_WCID_ATTRIBUTE_BSS_IDX      FIELD32(0x00000070)
#define MAC_WCID_ATTRIBUTE_RX_WIUDF     FIELD32(0x00000380)
#define MAC_WCID_ATTRIBUTE_CIPHER_EXT   FIELD32(0x00000400)
#define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT  FIELD32(0x00000800)
#define MAC_WCID_ATTRIBUTE_WAPI_MCBC    FIELD32(0x00008000)
#define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX FIELD32(0xff000000)

/*
 * SHARED_KEY_MODE:
 */
#define SHARED_KEY_MODE_BSS0_KEY0       FIELD32(0x00000007)
#define SHARED_KEY_MODE_BSS0_KEY1       FIELD32(0x00000070)
#define SHARED_KEY_MODE_BSS0_KEY2       FIELD32(0x00000700)
#define SHARED_KEY_MODE_BSS0_KEY3       FIELD32(0x00007000)
#define SHARED_KEY_MODE_BSS1_KEY0       FIELD32(0x00070000)
#define SHARED_KEY_MODE_BSS1_KEY1       FIELD32(0x00700000)
#define SHARED_KEY_MODE_BSS1_KEY2       FIELD32(0x07000000)
#define SHARED_KEY_MODE_BSS1_KEY3       FIELD32(0x70000000)

/*
 * HOST-MCU communication
 */

/*
 * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
 * CMD_TOKEN: Command id, 0xff disable status reporting.
 */
#define H2M_MAILBOX_CSR                 0x7010
#define H2M_MAILBOX_CSR_ARG0            FIELD32(0x000000ff)
#define H2M_MAILBOX_CSR_ARG1            FIELD32(0x0000ff00)
#define H2M_MAILBOX_CSR_CMD_TOKEN       FIELD32(0x00ff0000)
#define H2M_MAILBOX_CSR_OWNER           FIELD32(0xff000000)

/*
 * H2M_MAILBOX_CID:
 * Free slots contain 0xff. MCU will store command's token to lowest free slot.
 * If all slots are occupied status will be dropped.
 */
#define H2M_MAILBOX_CID                 0x7014
#define H2M_MAILBOX_CID_CMD0            FIELD32(0x000000ff)
#define H2M_MAILBOX_CID_CMD1            FIELD32(0x0000ff00)
#define H2M_MAILBOX_CID_CMD2            FIELD32(0x00ff0000)
#define H2M_MAILBOX_CID_CMD3            FIELD32(0xff000000)

/*
 * H2M_MAILBOX_STATUS:
 * Command status will be saved to same slot as command id.
 */
#define H2M_MAILBOX_STATUS              0x701c

/*
 * H2M_INT_SRC:
 */
#define H2M_INT_SRC                     0x7024

/*
 * H2M_BBP_AGENT:
 */
#define H2M_BBP_AGENT                   0x7028

/*
 * MCU_LEDCS: LED control for MCU Mailbox.
 */
#define MCU_LEDCS_LED_MODE              FIELD8(0x1f)
#define MCU_LEDCS_POLARITY              FIELD8(0x01)

/*
 * HW_CS_CTS_BASE:
 * Carrier-sense CTS frame base address.
 * It's where mac stores carrier-sense frame for carrier-sense function.
 */
#define HW_CS_CTS_BASE                  0x7700

/*
 * HW_DFS_CTS_BASE:
 * DFS CTS frame base address. It's where mac stores CTS frame for DFS.
 */
#define HW_DFS_CTS_BASE                 0x7780

/*
 * TXRX control registers - base address 0x3000
 */

/*
 * TXRX_CSR1:
 * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
 */
#define TXRX_CSR1                       0x77d0

/*
 * HW_DEBUG_SETTING_BASE:
 * since NULL frame won't be that long (256 byte)
 * We steal 16 tail bytes to save debugging settings
 */
#define HW_DEBUG_SETTING_BASE           0x77f0
#define HW_DEBUG_SETTING_BASE2          0x7770

/*
 * HW_BEACON_BASE
 * In order to support maximum 8 MBSS and its maximum length
 * is 512 bytes for each beacon
 * Three section discontinue memory segments will be used.
 * 1. The original region for BCN 0~3
 * 2. Extract memory from FCE table for BCN 4~5
 * 3. Extract memory from Pair-wise key table for BCN 6~7
 *    It occupied those memory of wcid 238~253 for BCN 6
 *    and wcid 222~237 for BCN 7 (see Security key table memory
 *    for more info).
 *
 * IMPORTANT NOTE: Not sure why legacy driver does this,
 * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
 */
#define HW_BEACON_BASE0                 0x7800
#define HW_BEACON_BASE1                 0x7a00
#define HW_BEACON_BASE2                 0x7c00
#define HW_BEACON_BASE3                 0x7e00
#define HW_BEACON_BASE4                 0x7200
#define HW_BEACON_BASE5                 0x7400
#define HW_BEACON_BASE6                 0x5dc0
#define HW_BEACON_BASE7                 0x5bc0

#define HW_BEACON_BASE(__index) \
        (((__index) < 4) ? (HW_BEACON_BASE0 + (__index * 0x0200)) : \
          (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \
          (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))))

#define BEACON_BASE_TO_OFFSET(_base)    (((_base) - 0x4000) / 64)

/*
 * BBP registers.
 * The wordsize of the BBP is 8 bits.
 */

/*
 * BBP 1: TX Antenna & Power Control
 * POWER_CTRL:
 * 0 - normal,
 * 1 - drop tx power by 6dBm,
 * 2 - drop tx power by 12dBm,
 * 3 - increase tx power by 6dBm
 */
#define BBP1_TX_POWER_CTRL              FIELD8(0x03)
#define BBP1_TX_ANTENNA                 FIELD8(0x18)

/*
 * BBP 3: RX Antenna
 */
#define BBP3_RX_ADC                     FIELD8(0x03)
#define BBP3_RX_ANTENNA                 FIELD8(0x18)
#define BBP3_HT40_MINUS                 FIELD8(0x20)
#define BBP3_ADC_MODE_SWITCH            FIELD8(0x40)
#define BBP3_ADC_INIT_MODE              FIELD8(0x80)

/*
 * BBP 4: Bandwidth
 */
#define BBP4_TX_BF                      FIELD8(0x01)
#define BBP4_BANDWIDTH                  FIELD8(0x18)
#define BBP4_MAC_IF_CTRL                FIELD8(0x40)

/* BBP27 */
#define BBP27_RX_CHAIN_SEL              FIELD8(0x60)

/*
 * BBP 47: Bandwidth
 */
#define BBP47_TSSI_REPORT_SEL           FIELD8(0x03)
#define BBP47_TSSI_UPDATE_REQ           FIELD8(0x04)
#define BBP47_TSSI_TSSI_MODE            FIELD8(0x18)
#define BBP47_TSSI_ADC6                 FIELD8(0x80)

/*
 * BBP 49
 */
#define BBP49_UPDATE_FLAG               FIELD8(0x01)

/*
 * BBP 105:
 * - bit0: detect SIG on primary channel only (on 40MHz bandwidth)
 * - bit1: FEQ (Feed Forward Compensation) for independend streams
 * - bit2: MLD (Maximum Likehood Detection) for 2 streams (reserved on single
 *         stream)
 * - bit4: channel estimation updates based on remodulation of
 *         L-SIG and HT-SIG symbols
 */
#define BBP105_DETECT_SIG_ON_PRIMARY    FIELD8(0x01)
#define BBP105_FEQ                      FIELD8(0x02)
#define BBP105_MLD                      FIELD8(0x04)
#define BBP105_SIG_REMODULATION         FIELD8(0x08)

/*
 * BBP 109
 */
#define BBP109_TX0_POWER                FIELD8(0x0f)
#define BBP109_TX1_POWER                FIELD8(0xf0)

/* BBP 110 */
#define BBP110_TX2_POWER                FIELD8(0x0f)


/*
 * BBP 138: Unknown
 */
#define BBP138_RX_ADC1                  FIELD8(0x02)
#define BBP138_RX_ADC2                  FIELD8(0x04)
#define BBP138_TX_DAC1                  FIELD8(0x20)
#define BBP138_TX_DAC2                  FIELD8(0x40)

/*
 * BBP 152: Rx Ant
 */
#define BBP152_RX_DEFAULT_ANT           FIELD8(0x80)

/*
 * BBP 254: unknown
 */
#define BBP254_BIT7                     FIELD8(0x80)

/*
 * RFCSR registers
 * The wordsize of the RFCSR is 8 bits.
 */

/*
 * RFCSR 1:
 */
#define RFCSR1_RF_BLOCK_EN              FIELD8(0x01)
#define RFCSR1_PLL_PD                   FIELD8(0x02)
#define RFCSR1_RX0_PD                   FIELD8(0x04)
#define RFCSR1_TX0_PD                   FIELD8(0x08)
#define RFCSR1_RX1_PD                   FIELD8(0x10)
#define RFCSR1_TX1_PD                   FIELD8(0x20)
#define RFCSR1_RX2_PD                   FIELD8(0x40)
#define RFCSR1_TX2_PD                   FIELD8(0x80)
#define RFCSR1_TX2_EN_MT7620            FIELD8(0x02)

/*
 * RFCSR 2:
 */
#define RFCSR2_RESCAL_EN                FIELD8(0x80)
#define RFCSR2_RX2_EN_MT7620            FIELD8(0x02)
#define RFCSR2_TX2_EN_MT7620            FIELD8(0x20)

/*
 * RFCSR 3:
 */
#define RFCSR3_K                        FIELD8(0x0f)
/* Bits [7-4] for RF3320 (RT3370/RT3390), on other chipsets reserved */
#define RFCSR3_PA1_BIAS_CCK             FIELD8(0x70)
#define RFCSR3_PA2_CASCODE_BIAS_CCKK    FIELD8(0x80)
/* Bits for RF3290/RF5360/RF5362/RF5370/RF5372/RF5390/RF5392 */
#define RFCSR3_VCOCAL_EN                FIELD8(0x80)
/* Bits for RF3050 */
#define RFCSR3_BIT1                     FIELD8(0x02)
#define RFCSR3_BIT2                     FIELD8(0x04)
#define RFCSR3_BIT3                     FIELD8(0x08)
#define RFCSR3_BIT4                     FIELD8(0x10)
#define RFCSR3_BIT5                     FIELD8(0x20)

/*
 * RFCSR 4:
 * VCOCAL_EN used by MT7620
 */
#define RFCSR4_VCOCAL_EN                FIELD8(0x80)

/*
 * FRCSR 5:
 */
#define RFCSR5_R1                       FIELD8(0x0c)

/*
 * RFCSR 6:
 */
#define RFCSR6_R1                       FIELD8(0x03)
#define RFCSR6_R2                       FIELD8(0x40)
#define RFCSR6_TXDIV                    FIELD8(0x0c)
/* bits for RF3053 */
#define RFCSR6_VCO_IC                   FIELD8(0xc0)

/*
 * RFCSR 7:
 */
#define RFCSR7_RF_TUNING                FIELD8(0x01)
#define RFCSR7_BIT1                     FIELD8(0x02)
#define RFCSR7_BIT2                     FIELD8(0x04)
#define RFCSR7_BIT3                     FIELD8(0x08)
#define RFCSR7_BIT4                     FIELD8(0x10)
#define RFCSR7_BIT5                     FIELD8(0x20)
#define RFCSR7_BITS67                   FIELD8(0xc0)

/*
 * RFCSR 9:
 */
#define RFCSR9_K                        FIELD8(0x0f)
#define RFCSR9_N                        FIELD8(0x10)
#define RFCSR9_UNKNOWN                  FIELD8(0x60)
#define RFCSR9_MOD                      FIELD8(0x80)

/*
 * RFCSR 11:
 */
#define RFCSR11_R                       FIELD8(0x03)
#define RFCSR11_PLL_MOD                 FIELD8(0x0c)
#define RFCSR11_MOD                     FIELD8(0xc0)
/* bits for RF3053 */
/* TODO: verify RFCSR11_MOD usage on other chips */
#define RFCSR11_PLL_IDOH                FIELD8(0x40)


/*
 * RFCSR 12:
 */
#define RFCSR12_TX_POWER                FIELD8(0x1f)
#define RFCSR12_DR0                     FIELD8(0xe0)

/*
 * RFCSR 13:
 */
#define RFCSR13_TX_POWER                FIELD8(0x1f)
#define RFCSR13_DR0                     FIELD8(0xe0)
#define RFCSR13_RDIV_MT7620             FIELD8(0x03)

/*
 * RFCSR 15:
 */
#define RFCSR15_TX_LO2_EN               FIELD8(0x08)

/*
 * RFCSR 16:
 */
#define RFCSR16_TXMIXER_GAIN            FIELD8(0x07)
#define RFCSR16_RF_PLL_FREQ_SEL_MT7620  FIELD8(0x0F)
#define RFCSR16_SDM_MODE_MT7620         FIELD8(0xE0)

/*
 * RFCSR 17:
 */
#define RFCSR17_TXMIXER_GAIN            FIELD8(0x07)
#define RFCSR17_TX_LO1_EN               FIELD8(0x08)
#define RFCSR17_R                       FIELD8(0x20)
#define RFCSR17_CODE                    FIELD8(0x7f)

/* RFCSR 18 */
#define RFCSR18_XO_TUNE_BYPASS          FIELD8(0x40)

/* RFCSR 19 */
#define RFCSR19_K                       FIELD8(0x03)

/*
 * RFCSR 20:
 */
#define RFCSR20_RX_LO1_EN               FIELD8(0x08)

/*
 * RFCSR 21:
 */
#define RFCSR21_RX_LO2_EN               FIELD8(0x08)
#define RFCSR21_BIT1                    FIELD8(0x01)
#define RFCSR21_BIT8                    FIELD8(0x80)

/*
 * RFCSR 22:
 */
#define RFCSR22_BASEBAND_LOOPBACK       FIELD8(0x01)
#define RFCSR22_FREQPLAN_D_MT7620       FIELD8(0x07)

/*
 * RFCSR 23:
 */
#define RFCSR23_FREQ_OFFSET             FIELD8(0x7f)

/*
 * RFCSR 24:
 */
#define RFCSR24_TX_AGC_FC               FIELD8(0x1f)
#define RFCSR24_TX_H20M                 FIELD8(0x20)
#define RFCSR24_TX_CALIB                FIELD8(0x7f)

/*
 * RFCSR 27:
 */
#define RFCSR27_R1                      FIELD8(0x03)
#define RFCSR27_R2                      FIELD8(0x04)
#define RFCSR27_R3                      FIELD8(0x30)
#define RFCSR27_R4                      FIELD8(0x40)

/*
 * RFCSR 28:
 */
#define RFCSR28_CH11_HT40               FIELD8(0x04)

/*
 * RFCSR 29:
 */
#define RFCSR29_ADC6_TEST               FIELD8(0x01)
#define RFCSR29_ADC6_INT_TEST           FIELD8(0x02)
#define RFCSR29_RSSI_RESET              FIELD8(0x04)
#define RFCSR29_RSSI_ON                 FIELD8(0x08)
#define RFCSR29_RSSI_RIP_CTRL           FIELD8(0x30)
#define RFCSR29_RSSI_GAIN               FIELD8(0xc0)

/*
 * RFCSR 30:
 */
#define RFCSR30_TX_H20M                 FIELD8(0x02)
#define RFCSR30_RX_H20M                 FIELD8(0x04)
#define RFCSR30_RX_VCM                  FIELD8(0x18)
#define RFCSR30_RF_CALIBRATION          FIELD8(0x80)
#define RF3322_RFCSR30_TX_H20M          FIELD8(0x01)
#define RF3322_RFCSR30_RX_H20M          FIELD8(0x02)

/*
 * RFCSR 31:
 */
#define RFCSR31_RX_AGC_FC               FIELD8(0x1f)
#define RFCSR31_RX_H20M                 FIELD8(0x20)
#define RFCSR31_RX_CALIB                FIELD8(0x7f)

/* RFCSR 32 bits for RF3053 */
#define RFCSR32_TX_AGC_FC               FIELD8(0xf8)

/* RFCSR 36 bits for RF3053 */
#define RFCSR36_RF_BS                   FIELD8(0x80)

/*
 * RFCSR 34:
 */
#define RFCSR34_TX0_EXT_PA              FIELD8(0x04)
#define RFCSR34_TX1_EXT_PA              FIELD8(0x08)

/*
 * RFCSR 38:
 */
#define RFCSR38_RX_LO1_EN               FIELD8(0x20)

/*
 * RFCSR 39:
 */
#define RFCSR39_RX_DIV                  FIELD8(0x40)
#define RFCSR39_RX_LO2_EN               FIELD8(0x80)

/*
 * RFCSR 41:
 */
#define RFCSR41_BIT1                    FIELD8(0x01)
#define RFCSR41_BIT4                    FIELD8(0x08)

/*
 * RFCSR 42:
 */
#define RFCSR42_BIT1                    FIELD8(0x01)
#define RFCSR42_BIT4                    FIELD8(0x08)
#define RFCSR42_TX2_EN_MT7620           FIELD8(0x40)

/*
 * RFCSR 49:
 */
#define RFCSR49_TX                      FIELD8(0x3f)
#define RFCSR49_EP                      FIELD8(0xc0)
/* bits for RT3593 */
#define RFCSR49_TX_LO1_IC               FIELD8(0x1c)
#define RFCSR49_TX_DIV                  FIELD8(0x20)

/*
 * RFCSR 50:
 */
#define RFCSR50_TX                      FIELD8(0x3f)
#define RFCSR50_TX0_EXT_PA              FIELD8(0x02)
#define RFCSR50_TX1_EXT_PA              FIELD8(0x10)
#define RFCSR50_EP                      FIELD8(0xc0)
/* bits for RT3593 */
#define RFCSR50_TX_LO1_EN               FIELD8(0x20)
#define RFCSR50_TX_LO2_EN               FIELD8(0x10)

/* RFCSR 51 */
/* bits for RT3593 */
#define RFCSR51_BITS01                  FIELD8(0x03)
#define RFCSR51_BITS24                  FIELD8(0x1c)
#define RFCSR51_BITS57                  FIELD8(0xe0)

#define RFCSR53_TX_POWER                FIELD8(0x3f)
#define RFCSR53_UNKNOWN                 FIELD8(0xc0)

#define RFCSR54_TX_POWER                FIELD8(0x3f)
#define RFCSR54_UNKNOWN                 FIELD8(0xc0)

#define RFCSR55_TX_POWER                FIELD8(0x3f)
#define RFCSR55_UNKNOWN                 FIELD8(0xc0)

#define RFCSR57_DRV_CC                  FIELD8(0xfc)


/*
 * RF registers
 */

/*
 * RF 2
 */
#define RF2_ANTENNA_RX2                 FIELD32(0x00000040)
#define RF2_ANTENNA_TX1                 FIELD32(0x00004000)
#define RF2_ANTENNA_RX1                 FIELD32(0x00020000)

/*
 * RF 3
 */
#define RF3_TXPOWER_G                   FIELD32(0x00003e00)
#define RF3_TXPOWER_A_7DBM_BOOST        FIELD32(0x00000200)
#define RF3_TXPOWER_A                   FIELD32(0x00003c00)

/*
 * RF 4
 */
#define RF4_TXPOWER_G                   FIELD32(0x000007c0)
#define RF4_TXPOWER_A_7DBM_BOOST        FIELD32(0x00000040)
#define RF4_TXPOWER_A                   FIELD32(0x00000780)
#define RF4_FREQ_OFFSET                 FIELD32(0x001f8000)
#define RF4_HT40                        FIELD32(0x00200000)

/*
 * EEPROM content.
 * The wordsize of the EEPROM is 16 bits.
 */

enum rt2800_eeprom_word {
        EEPROM_CHIP_ID = 0,
        EEPROM_VERSION,
        EEPROM_MAC_ADDR_0,
        EEPROM_MAC_ADDR_1,
        EEPROM_MAC_ADDR_2,
        EEPROM_NIC_CONF0,
        EEPROM_NIC_CONF1,
        EEPROM_FREQ,
        EEPROM_LED_AG_CONF,
        EEPROM_LED_ACT_CONF,
        EEPROM_LED_POLARITY,
        EEPROM_NIC_CONF2,
        EEPROM_LNA,
        EEPROM_RSSI_BG,
        EEPROM_RSSI_BG2,
        EEPROM_TXMIXER_GAIN_BG,
        EEPROM_RSSI_A,
        EEPROM_RSSI_A2,
        EEPROM_TXMIXER_GAIN_A,
        EEPROM_EIRP_MAX_TX_POWER,
        EEPROM_TXPOWER_DELTA,
        EEPROM_TXPOWER_BG1,
        EEPROM_TXPOWER_BG2,
        EEPROM_TSSI_BOUND_BG1,
        EEPROM_TSSI_BOUND_BG2,
        EEPROM_TSSI_BOUND_BG3,
        EEPROM_TSSI_BOUND_BG4,
        EEPROM_TSSI_BOUND_BG5,
        EEPROM_TXPOWER_A1,
        EEPROM_TXPOWER_A2,
        EEPROM_TXPOWER_INIT,
        EEPROM_TSSI_BOUND_A1,
        EEPROM_TSSI_BOUND_A2,
        EEPROM_TSSI_BOUND_A3,
        EEPROM_TSSI_BOUND_A4,
        EEPROM_TSSI_BOUND_A5,
        EEPROM_TXPOWER_BYRATE,
        EEPROM_BBP_START,

        /* IDs for extended EEPROM format used by three-chain devices */
        EEPROM_EXT_LNA2,
        EEPROM_EXT_TXPOWER_BG3,
        EEPROM_EXT_TXPOWER_A3,

        /* New values must be added before this */
        EEPROM_WORD_COUNT
};

/*
 * EEPROM Version
 */
#define EEPROM_VERSION_FAE              FIELD16(0x00ff)
#define EEPROM_VERSION_VERSION          FIELD16(0xff00)

/*
 * HW MAC address.
 */
#define EEPROM_MAC_ADDR_BYTE0           FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE1           FIELD16(0xff00)
#define EEPROM_MAC_ADDR_BYTE2           FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE3           FIELD16(0xff00)
#define EEPROM_MAC_ADDR_BYTE4           FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE5           FIELD16(0xff00)

/*
 * EEPROM NIC Configuration 0
 * RXPATH: 1: 1R, 2: 2R, 3: 3R
 * TXPATH: 1: 1T, 2: 2T, 3: 3T
 * RF_TYPE: RFIC type
 */
#define EEPROM_NIC_CONF0_RXPATH         FIELD16(0x000f)
#define EEPROM_NIC_CONF0_TXPATH         FIELD16(0x00f0)
#define EEPROM_NIC_CONF0_RF_TYPE        FIELD16(0x0f00)

/*
 * EEPROM NIC Configuration 1
 * HW_RADIO: 0: disable, 1: enable
 * EXTERNAL_TX_ALC: 0: disable, 1: enable
 * EXTERNAL_LNA_2G: 0: disable, 1: enable
 * EXTERNAL_LNA_5G: 0: disable, 1: enable
 * CARDBUS_ACCEL: 0: enable, 1: disable
 * BW40M_SB_2G: 0: disable, 1: enable
 * BW40M_SB_5G: 0: disable, 1: enable
 * WPS_PBC: 0: disable, 1: enable
 * BW40M_2G: 0: enable, 1: disable
 * BW40M_5G: 0: enable, 1: disable
 * BROADBAND_EXT_LNA: 0: disable, 1: enable
 * ANT_DIVERSITY: 00: Disable, 01: Diversity,
 *                                10: Main antenna, 11: Aux antenna
 * INTERNAL_TX_ALC: 0: disable, 1: enable
 * BT_COEXIST: 0: disable, 1: enable
 * DAC_TEST: 0: disable, 1: enable
 * EXTERNAL_TX0_PA: 0: disable, 1: enable (only on RT3352)
 * EXTERNAL_TX1_PA: 0: disable, 1: enable (only on RT3352)
 */
#define EEPROM_NIC_CONF1_HW_RADIO               FIELD16(0x0001)
#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC        FIELD16(0x0002)
#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G        FIELD16(0x0004)
#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G        FIELD16(0x0008)
#define EEPROM_NIC_CONF1_CARDBUS_ACCEL          FIELD16(0x0010)
#define EEPROM_NIC_CONF1_BW40M_SB_2G            FIELD16(0x0020)
#define EEPROM_NIC_CONF1_BW40M_SB_5G            FIELD16(0x0040)
#define EEPROM_NIC_CONF1_WPS_PBC                FIELD16(0x0080)
#define EEPROM_NIC_CONF1_BW40M_2G               FIELD16(0x0100)
#define EEPROM_NIC_CONF1_BW40M_5G               FIELD16(0x0200)
#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA      FIELD16(0x400)
#define EEPROM_NIC_CONF1_ANT_DIVERSITY          FIELD16(0x1800)
#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC        FIELD16(0x2000)
#define EEPROM_NIC_CONF1_BT_COEXIST             FIELD16(0x4000)
#define EEPROM_NIC_CONF1_DAC_TEST               FIELD16(0x8000)
#define EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352   FIELD16(0x4000)
#define EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352   FIELD16(0x8000)

/*
 * EEPROM frequency
 */
#define EEPROM_FREQ_OFFSET              FIELD16(0x00ff)
#define EEPROM_FREQ_LED_MODE            FIELD16(0x7f00)
#define EEPROM_FREQ_LED_POLARITY        FIELD16(0x1000)

/*
 * EEPROM LED
 * POLARITY_RDY_G: Polarity RDY_G setting.
 * POLARITY_RDY_A: Polarity RDY_A setting.
 * POLARITY_ACT: Polarity ACT setting.
 * POLARITY_GPIO_0: Polarity GPIO0 setting.
 * POLARITY_GPIO_1: Polarity GPIO1 setting.
 * POLARITY_GPIO_2: Polarity GPIO2 setting.
 * POLARITY_GPIO_3: Polarity GPIO3 setting.
 * POLARITY_GPIO_4: Polarity GPIO4 setting.
 * LED_MODE: Led mode.
 */
#define EEPROM_LED_POLARITY_RDY_BG      FIELD16(0x0001)
#define EEPROM_LED_POLARITY_RDY_A       FIELD16(0x0002)
#define EEPROM_LED_POLARITY_ACT         FIELD16(0x0004)
#define EEPROM_LED_POLARITY_GPIO_0      FIELD16(0x0008)
#define EEPROM_LED_POLARITY_GPIO_1      FIELD16(0x0010)
#define EEPROM_LED_POLARITY_GPIO_2      FIELD16(0x0020)
#define EEPROM_LED_POLARITY_GPIO_3      FIELD16(0x0040)
#define EEPROM_LED_POLARITY_GPIO_4      FIELD16(0x0080)
#define EEPROM_LED_LED_MODE             FIELD16(0x1f00)

/*
 * EEPROM NIC Configuration 2
 * RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
 * TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
 * CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved
 */
#define EEPROM_NIC_CONF2_RX_STREAM      FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM      FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL        FIELD16(0x0600)

/*
 * EEPROM LNA
 */
#define EEPROM_LNA_BG                   FIELD16(0x00ff)
#define EEPROM_LNA_A0                   FIELD16(0xff00)

/*
 * EEPROM RSSI BG offset
 */
#define EEPROM_RSSI_BG_OFFSET0          FIELD16(0x00ff)
#define EEPROM_RSSI_BG_OFFSET1          FIELD16(0xff00)

/*
 * EEPROM RSSI BG2 offset
 */
#define EEPROM_RSSI_BG2_OFFSET2         FIELD16(0x00ff)
#define EEPROM_RSSI_BG2_LNA_A1          FIELD16(0xff00)

/*
 * EEPROM TXMIXER GAIN BG offset (note overlaps with EEPROM RSSI BG2).
 */
#define EEPROM_TXMIXER_GAIN_BG_VAL      FIELD16(0x0007)

/*
 * EEPROM RSSI A offset
 */
#define EEPROM_RSSI_A_OFFSET0           FIELD16(0x00ff)
#define EEPROM_RSSI_A_OFFSET1           FIELD16(0xff00)

/*
 * EEPROM RSSI A2 offset
 */
#define EEPROM_RSSI_A2_OFFSET2          FIELD16(0x00ff)
#define EEPROM_RSSI_A2_LNA_A2           FIELD16(0xff00)

/*
 * EEPROM TXMIXER GAIN A offset (note overlaps with EEPROM RSSI A2).
 */
#define EEPROM_TXMIXER_GAIN_A_VAL       FIELD16(0x0007)

/*
 * EEPROM EIRP Maximum TX power values(unit: dbm)
 */
#define EEPROM_EIRP_MAX_TX_POWER_2GHZ   FIELD16(0x00ff)
#define EEPROM_EIRP_MAX_TX_POWER_5GHZ   FIELD16(0xff00)

/*
 * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
 * This is delta in 40MHZ.
 * VALUE: Tx Power dalta value, MAX=4(unit: dbm)
 * TYPE: 1: Plus the delta value, 0: minus the delta value
 * ENABLE: enable tx power compensation for 40BW
 */
#define EEPROM_TXPOWER_DELTA_VALUE_2G   FIELD16(0x003f)
#define EEPROM_TXPOWER_DELTA_TYPE_2G    FIELD16(0x0040)
#define EEPROM_TXPOWER_DELTA_ENABLE_2G  FIELD16(0x0080)
#define EEPROM_TXPOWER_DELTA_VALUE_5G   FIELD16(0x3f00)
#define EEPROM_TXPOWER_DELTA_TYPE_5G    FIELD16(0x4000)
#define EEPROM_TXPOWER_DELTA_ENABLE_5G  FIELD16(0x8000)

/*
 * EEPROM TXPOWER 802.11BG
 */
#define EEPROM_TXPOWER_BG_SIZE          7
#define EEPROM_TXPOWER_BG_1             FIELD16(0x00ff)
#define EEPROM_TXPOWER_BG_2             FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11BG
 * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -4)
 * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -3)
 */
#define EEPROM_TSSI_BOUND_BG1_MINUS4    FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG1_MINUS3    FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11BG
 * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -2)
 * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -1)
 */
#define EEPROM_TSSI_BOUND_BG2_MINUS2    FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG2_MINUS1    FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11BG
 * REF: Reference TSSI value, no tx power changes needed
 * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 1)
 */
#define EEPROM_TSSI_BOUND_BG3_REF       FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG3_PLUS1     FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11BG
 * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 2)
 * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 3)
 */
#define EEPROM_TSSI_BOUND_BG4_PLUS2     FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG4_PLUS3     FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11BG
 * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 4)
 * AGC_STEP: Temperature compensation step.
 */
#define EEPROM_TSSI_BOUND_BG5_PLUS4     FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG5_AGC_STEP  FIELD16(0xff00)

/*
 * EEPROM TXPOWER 802.11A
 */
#define EEPROM_TXPOWER_A_SIZE           6
#define EEPROM_TXPOWER_A_1              FIELD16(0x00ff)
#define EEPROM_TXPOWER_A_2              FIELD16(0xff00)

/* EEPROM_TXPOWER_{A,G} fields for RT3593 */
#define EEPROM_TXPOWER_ALC              FIELD8(0x1f)
#define EEPROM_TXPOWER_FINE_CTRL        FIELD8(0xe0)

/*
 * EEPROM temperature compensation boundaries 802.11A
 * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -4)
 * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -3)
 */
#define EEPROM_TSSI_BOUND_A1_MINUS4     FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A1_MINUS3     FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11A
 * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -2)
 * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
 *         reduced by (agc_step * -1)
 */
#define EEPROM_TSSI_BOUND_A2_MINUS2     FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A2_MINUS1     FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11A
 * REF: Reference TSSI value, no tx power changes needed
 * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 1)
 */
#define EEPROM_TSSI_BOUND_A3_REF        FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A3_PLUS1      FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11A
 * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 2)
 * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 3)
 */
#define EEPROM_TSSI_BOUND_A4_PLUS2      FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A4_PLUS3      FIELD16(0xff00)

/*
 * EEPROM temperature compensation boundaries 802.11A
 * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
 *        increased by (agc_step * 4)
 * AGC_STEP: Temperature compensation step.
 */
#define EEPROM_TSSI_BOUND_A5_PLUS4      FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A5_AGC_STEP   FIELD16(0xff00)

/*
 * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
 */
#define EEPROM_TXPOWER_BYRATE_SIZE      9

#define EEPROM_TXPOWER_BYRATE_RATE0     FIELD16(0x000f)
#define EEPROM_TXPOWER_BYRATE_RATE1     FIELD16(0x00f0)
#define EEPROM_TXPOWER_BYRATE_RATE2     FIELD16(0x0f00)
#define EEPROM_TXPOWER_BYRATE_RATE3     FIELD16(0xf000)

/*
 * EEPROM BBP.
 */
#define EEPROM_BBP_SIZE                 16
#define EEPROM_BBP_VALUE                FIELD16(0x00ff)
#define EEPROM_BBP_REG_ID               FIELD16(0xff00)

/* EEPROM_EXT_LNA2 */
#define EEPROM_EXT_LNA2_A1              FIELD16(0x00ff)
#define EEPROM_EXT_LNA2_A2              FIELD16(0xff00)

/*
 * EEPROM IQ Calibration, unlike other entries those are byte addresses.
 */

#define EEPROM_IQ_GAIN_CAL_TX0_2G                       0x130
#define EEPROM_IQ_PHASE_CAL_TX0_2G                      0x131
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G                 0x132
#define EEPROM_IQ_GAIN_CAL_TX1_2G                       0x133
#define EEPROM_IQ_PHASE_CAL_TX1_2G                      0x134
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G                 0x135
#define EEPROM_IQ_GAIN_CAL_RX0_2G                       0x136
#define EEPROM_IQ_PHASE_CAL_RX0_2G                      0x137
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G                 0x138
#define EEPROM_IQ_GAIN_CAL_RX1_2G                       0x139
#define EEPROM_IQ_PHASE_CAL_RX1_2G                      0x13A
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G                 0x13B
#define EEPROM_RF_IQ_COMPENSATION_CONTROL               0x13C
#define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL     0x13D
#define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G          0x144
#define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G         0x145
#define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G        0X146
#define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G       0x147
#define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G        0x148
#define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G       0x149
#define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G          0x14A
#define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G         0x14B
#define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G        0X14C
#define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G       0x14D
#define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G        0x14E
#define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G       0x14F
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G    0x150
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G    0x151
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G  0x152
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G  0x153
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G  0x154
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G  0x155
#define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G          0x156
#define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G         0x157
#define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G        0X158
#define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G       0x159
#define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G        0x15A
#define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G       0x15B
#define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G          0x15C
#define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G         0x15D
#define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G        0X15E
#define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G       0x15F
#define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G        0x160
#define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G       0x161
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G    0x162
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G    0x163
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G  0x164
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G  0x165
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G  0x166
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G  0x167

/*
 * MCU mailbox commands.
 * MCU_SLEEP - go to power-save mode.
 *             arg1: 1: save as much power as possible, 0: save less power.
 *             status: 1: success, 2: already asleep,
 *                     3: maybe MAC is busy so can't finish this task.
 * MCU_RADIO_OFF
 *             arg0: 0: do power-saving, NOT turn off radio.
 */
#define MCU_SLEEP                       0x30
#define MCU_WAKEUP                      0x31
#define MCU_RADIO_OFF                   0x35
#define MCU_CURRENT                     0x36
#define MCU_LED                         0x50
#define MCU_LED_STRENGTH                0x51

#define MCU_LED_AG_CONF                 0x52
#define MCU_LED_ACT_CONF                0x53
#define MCU_LED_LED_POLARITY            0x54
#define MCU_RADAR                       0x60
#define MCU_BOOT_SIGNAL                 0x72
#define MCU_ANT_SELECT                  0X73
#define MCU_FREQ_OFFSET                 0x74
#define MCU_BBP_SIGNAL                  0x80
#define MCU_POWER_SAVE                  0x83
#define MCU_BAND_SELECT                 0x91

/*
 * MCU mailbox tokens
 */
#define TOKEN_SLEEP                     1
#define TOKEN_RADIO_OFF                 2
#define TOKEN_WAKEUP                    3


/*
 * DMA descriptor defines.
 */

#define TXWI_DESC_SIZE_4WORDS           (4 * sizeof(__le32))
#define TXWI_DESC_SIZE_5WORDS           (5 * sizeof(__le32))

#define RXWI_DESC_SIZE_4WORDS           (4 * sizeof(__le32))
#define RXWI_DESC_SIZE_5WORDS           (5 * sizeof(__le32))
#define RXWI_DESC_SIZE_6WORDS           (6 * sizeof(__le32))

/*
 * TX WI structure
 */

/*
 * Word0
 * FRAG: 1 To inform TKIP engine this is a fragment.
 * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
 * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
 * BW: Channel bandwidth 0:20MHz, 1:40 MHz (for legacy rates this will
 *     duplicate the frame to both channels).
 * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
 * AMPDU: 1: this frame is eligible for AMPDU aggregation, the hw will
 *        aggregate consecutive frames with the same RA and QoS TID. If
 *        a frame A with the same RA and QoS TID but AMPDU=0 is queued
 *        directly after a frame B with AMPDU=1, frame A might still
 *        get aggregated into the AMPDU started by frame B. So, setting
 *        AMPDU to 0 does _not_ necessarily mean the frame is sent as
 *        MPDU, it can still end up in an AMPDU if the previous frame
 *        was tagged as AMPDU.
 */
#define TXWI_W0_FRAG                    FIELD32(0x00000001)
#define TXWI_W0_MIMO_PS                 FIELD32(0x00000002)
#define TXWI_W0_CF_ACK                  FIELD32(0x00000004)
#define TXWI_W0_TS                      FIELD32(0x00000008)
#define TXWI_W0_AMPDU                   FIELD32(0x00000010)
#define TXWI_W0_MPDU_DENSITY            FIELD32(0x000000e0)
#define TXWI_W0_TX_OP                   FIELD32(0x00000300)
#define TXWI_W0_MCS                     FIELD32(0x007f0000)
#define TXWI_W0_BW                      FIELD32(0x00800000)
#define TXWI_W0_SHORT_GI                FIELD32(0x01000000)
#define TXWI_W0_STBC                    FIELD32(0x06000000)
#define TXWI_W0_IFS                     FIELD32(0x08000000)
#define TXWI_W0_PHYMODE                 FIELD32(0xc0000000)

/*
 * Word1
 * ACK: 0: No Ack needed, 1: Ack needed
 * NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number
 * BW_WIN_SIZE: BA windows size of the recipient
 * WIRELESS_CLI_ID: Client ID for WCID table access
 * MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame
 * PACKETID: Will be latched into the TX_STA_FIFO register once the according
 *           frame was processed. If multiple frames are aggregated together
 *           (AMPDU==1) the reported tx status will always contain the packet
 *           id of the first frame. 0: Don't report tx status for this frame.
 * PACKETID_QUEUE: Part of PACKETID, This is the queue index (0-3)
 * PACKETID_ENTRY: Part of PACKETID, THis is the queue entry index (1-3)
 *                 This identification number is calculated by ((idx % 3) + 1).
 *                 The (+1) is required to prevent PACKETID to become 0.
 */
#define TXWI_W1_ACK                     FIELD32(0x00000001)
#define TXWI_W1_NSEQ                    FIELD32(0x00000002)
#define TXWI_W1_BW_WIN_SIZE             FIELD32(0x000000fc)
#define TXWI_W1_WIRELESS_CLI_ID         FIELD32(0x0000ff00)
#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT   FIELD32(0x0fff0000)
#define TXWI_W1_PACKETID                FIELD32(0xf0000000)
#define TXWI_W1_PACKETID_QUEUE          FIELD32(0x30000000)
#define TXWI_W1_PACKETID_ENTRY          FIELD32(0xc0000000)

/*
 * Word2
 */
#define TXWI_W2_IV                      FIELD32(0xffffffff)

/*
 * Word3
 */
#define TXWI_W3_EIV                     FIELD32(0xffffffff)

/*
 * RX WI structure
 */

/*
 * Word0
 */
#define RXWI_W0_WIRELESS_CLI_ID         FIELD32(0x000000ff)
#define RXWI_W0_KEY_INDEX               FIELD32(0x00000300)
#define RXWI_W0_BSSID                   FIELD32(0x00001c00)
#define RXWI_W0_UDF                     FIELD32(0x0000e000)
#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT   FIELD32(0x0fff0000)
#define RXWI_W0_TID                     FIELD32(0xf0000000)

/*
 * Word1
 */
#define RXWI_W1_FRAG                    FIELD32(0x0000000f)
#define RXWI_W1_SEQUENCE                FIELD32(0x0000fff0)
#define RXWI_W1_MCS                     FIELD32(0x007f0000)
#define RXWI_W1_BW                      FIELD32(0x00800000)
#define RXWI_W1_SHORT_GI                FIELD32(0x01000000)
#define RXWI_W1_STBC                    FIELD32(0x06000000)
#define RXWI_W1_PHYMODE                 FIELD32(0xc0000000)

/*
 * Word2
 */
#define RXWI_W2_RSSI0                   FIELD32(0x000000ff)
#define RXWI_W2_RSSI1                   FIELD32(0x0000ff00)
#define RXWI_W2_RSSI2                   FIELD32(0x00ff0000)

/*
 * Word3
 */
#define RXWI_W3_SNR0                    FIELD32(0x000000ff)
#define RXWI_W3_SNR1                    FIELD32(0x0000ff00)

/*
 * Macros for converting txpower from EEPROM to mac80211 value
 * and from mac80211 value to register value.
 */
#define MIN_G_TXPOWER   0
#define MIN_A_TXPOWER   -7
#define MAX_G_TXPOWER   31
#define MAX_A_TXPOWER   15
#define DEFAULT_TXPOWER 5

#define MIN_A_TXPOWER_3593      0
#define MAX_A_TXPOWER_3593      31

#define TXPOWER_G_FROM_DEV(__txpower) \
        ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)

#define TXPOWER_A_FROM_DEV(__txpower) \
        ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)

/*
 *  Board's maximun TX power limitation
 */
#define EIRP_MAX_TX_POWER_LIMIT 0x50

/*
 * Number of TBTT intervals after which we have to adjust
 * the hw beacon timer.
 */
#define BCN_TBTT_OFFSET 64

#endif /* RT2800_H */