linux/drivers/scsi/qlogicpti.c
<<
>>
Prefs
   1/* qlogicpti.c: Performance Technologies QlogicISP sbus card driver.
   2 *
   3 * Copyright (C) 1996, 2006, 2008 David S. Miller (davem@davemloft.net)
   4 *
   5 * A lot of this driver was directly stolen from Erik H. Moe's PCI
   6 * Qlogic ISP driver.  Mucho kudos to him for this code.
   7 *
   8 * An even bigger kudos to John Grana at Performance Technologies
   9 * for providing me with the hardware to write this driver, you rule
  10 * John you really do.
  11 *
  12 * May, 2, 1997: Added support for QLGC,isp --jj
  13 */
  14
  15#include <linux/kernel.h>
  16#include <linux/delay.h>
  17#include <linux/types.h>
  18#include <linux/string.h>
  19#include <linux/gfp.h>
  20#include <linux/blkdev.h>
  21#include <linux/proc_fs.h>
  22#include <linux/stat.h>
  23#include <linux/init.h>
  24#include <linux/spinlock.h>
  25#include <linux/interrupt.h>
  26#include <linux/module.h>
  27#include <linux/jiffies.h>
  28#include <linux/dma-mapping.h>
  29#include <linux/of.h>
  30#include <linux/of_device.h>
  31#include <linux/firmware.h>
  32
  33#include <asm/byteorder.h>
  34
  35#include "qlogicpti.h"
  36
  37#include <asm/dma.h>
  38#include <asm/ptrace.h>
  39#include <asm/pgtable.h>
  40#include <asm/oplib.h>
  41#include <asm/io.h>
  42#include <asm/irq.h>
  43
  44#include <scsi/scsi.h>
  45#include <scsi/scsi_cmnd.h>
  46#include <scsi/scsi_device.h>
  47#include <scsi/scsi_eh.h>
  48#include <scsi/scsi_tcq.h>
  49#include <scsi/scsi_host.h>
  50
  51#define MAX_TARGETS     16
  52#define MAX_LUNS        8       /* 32 for 1.31 F/W */
  53
  54#define DEFAULT_LOOP_COUNT      10000
  55
  56static struct qlogicpti *qptichain = NULL;
  57static DEFINE_SPINLOCK(qptichain_lock);
  58
  59#define PACKB(a, b)                     (((a)<<4)|(b))
  60
  61static const u_char mbox_param[] = {
  62        PACKB(1, 1),    /* MBOX_NO_OP */
  63        PACKB(5, 5),    /* MBOX_LOAD_RAM */
  64        PACKB(2, 0),    /* MBOX_EXEC_FIRMWARE */
  65        PACKB(5, 5),    /* MBOX_DUMP_RAM */
  66        PACKB(3, 3),    /* MBOX_WRITE_RAM_WORD */
  67        PACKB(2, 3),    /* MBOX_READ_RAM_WORD */
  68        PACKB(6, 6),    /* MBOX_MAILBOX_REG_TEST */
  69        PACKB(2, 3),    /* MBOX_VERIFY_CHECKSUM */
  70        PACKB(1, 3),    /* MBOX_ABOUT_FIRMWARE */
  71        PACKB(0, 0),    /* 0x0009 */
  72        PACKB(0, 0),    /* 0x000a */
  73        PACKB(0, 0),    /* 0x000b */
  74        PACKB(0, 0),    /* 0x000c */
  75        PACKB(0, 0),    /* 0x000d */
  76        PACKB(1, 2),    /* MBOX_CHECK_FIRMWARE */
  77        PACKB(0, 0),    /* 0x000f */
  78        PACKB(5, 5),    /* MBOX_INIT_REQ_QUEUE */
  79        PACKB(6, 6),    /* MBOX_INIT_RES_QUEUE */
  80        PACKB(4, 4),    /* MBOX_EXECUTE_IOCB */
  81        PACKB(2, 2),    /* MBOX_WAKE_UP */
  82        PACKB(1, 6),    /* MBOX_STOP_FIRMWARE */
  83        PACKB(4, 4),    /* MBOX_ABORT */
  84        PACKB(2, 2),    /* MBOX_ABORT_DEVICE */
  85        PACKB(3, 3),    /* MBOX_ABORT_TARGET */
  86        PACKB(2, 2),    /* MBOX_BUS_RESET */
  87        PACKB(2, 3),    /* MBOX_STOP_QUEUE */
  88        PACKB(2, 3),    /* MBOX_START_QUEUE */
  89        PACKB(2, 3),    /* MBOX_SINGLE_STEP_QUEUE */
  90        PACKB(2, 3),    /* MBOX_ABORT_QUEUE */
  91        PACKB(2, 4),    /* MBOX_GET_DEV_QUEUE_STATUS */
  92        PACKB(0, 0),    /* 0x001e */
  93        PACKB(1, 3),    /* MBOX_GET_FIRMWARE_STATUS */
  94        PACKB(1, 2),    /* MBOX_GET_INIT_SCSI_ID */
  95        PACKB(1, 2),    /* MBOX_GET_SELECT_TIMEOUT */
  96        PACKB(1, 3),    /* MBOX_GET_RETRY_COUNT */
  97        PACKB(1, 2),    /* MBOX_GET_TAG_AGE_LIMIT */
  98        PACKB(1, 2),    /* MBOX_GET_CLOCK_RATE */
  99        PACKB(1, 2),    /* MBOX_GET_ACT_NEG_STATE */
 100        PACKB(1, 2),    /* MBOX_GET_ASYNC_DATA_SETUP_TIME */
 101        PACKB(1, 3),    /* MBOX_GET_SBUS_PARAMS */
 102        PACKB(2, 4),    /* MBOX_GET_TARGET_PARAMS */
 103        PACKB(2, 4),    /* MBOX_GET_DEV_QUEUE_PARAMS */
 104        PACKB(0, 0),    /* 0x002a */
 105        PACKB(0, 0),    /* 0x002b */
 106        PACKB(0, 0),    /* 0x002c */
 107        PACKB(0, 0),    /* 0x002d */
 108        PACKB(0, 0),    /* 0x002e */
 109        PACKB(0, 0),    /* 0x002f */
 110        PACKB(2, 2),    /* MBOX_SET_INIT_SCSI_ID */
 111        PACKB(2, 2),    /* MBOX_SET_SELECT_TIMEOUT */
 112        PACKB(3, 3),    /* MBOX_SET_RETRY_COUNT */
 113        PACKB(2, 2),    /* MBOX_SET_TAG_AGE_LIMIT */
 114        PACKB(2, 2),    /* MBOX_SET_CLOCK_RATE */
 115        PACKB(2, 2),    /* MBOX_SET_ACTIVE_NEG_STATE */
 116        PACKB(2, 2),    /* MBOX_SET_ASYNC_DATA_SETUP_TIME */
 117        PACKB(3, 3),    /* MBOX_SET_SBUS_CONTROL_PARAMS */
 118        PACKB(4, 4),    /* MBOX_SET_TARGET_PARAMS */
 119        PACKB(4, 4),    /* MBOX_SET_DEV_QUEUE_PARAMS */
 120        PACKB(0, 0),    /* 0x003a */
 121        PACKB(0, 0),    /* 0x003b */
 122        PACKB(0, 0),    /* 0x003c */
 123        PACKB(0, 0),    /* 0x003d */
 124        PACKB(0, 0),    /* 0x003e */
 125        PACKB(0, 0),    /* 0x003f */
 126        PACKB(0, 0),    /* 0x0040 */
 127        PACKB(0, 0),    /* 0x0041 */
 128        PACKB(0, 0)     /* 0x0042 */
 129};
 130
 131#define MAX_MBOX_COMMAND        ARRAY_SIZE(mbox_param)
 132
 133/* queue length's _must_ be power of two: */
 134#define QUEUE_DEPTH(in, out, ql)        ((in - out) & (ql))
 135#define REQ_QUEUE_DEPTH(in, out)        QUEUE_DEPTH(in, out,                 \
 136                                                    QLOGICPTI_REQ_QUEUE_LEN)
 137#define RES_QUEUE_DEPTH(in, out)        QUEUE_DEPTH(in, out, RES_QUEUE_LEN)
 138
 139static inline void qlogicpti_enable_irqs(struct qlogicpti *qpti)
 140{
 141        sbus_writew(SBUS_CTRL_ERIRQ | SBUS_CTRL_GENAB,
 142                    qpti->qregs + SBUS_CTRL);
 143}
 144
 145static inline void qlogicpti_disable_irqs(struct qlogicpti *qpti)
 146{
 147        sbus_writew(0, qpti->qregs + SBUS_CTRL);
 148}
 149
 150static inline void set_sbus_cfg1(struct qlogicpti *qpti)
 151{
 152        u16 val;
 153        u8 bursts = qpti->bursts;
 154
 155#if 0   /* It appears that at least PTI cards do not support
 156         * 64-byte bursts and that setting the B64 bit actually
 157         * is a nop and the chip ends up using the smallest burst
 158         * size. -DaveM
 159         */
 160        if (sbus_can_burst64() && (bursts & DMA_BURST64)) {
 161                val = (SBUS_CFG1_BENAB | SBUS_CFG1_B64);
 162        } else
 163#endif
 164        if (bursts & DMA_BURST32) {
 165                val = (SBUS_CFG1_BENAB | SBUS_CFG1_B32);
 166        } else if (bursts & DMA_BURST16) {
 167                val = (SBUS_CFG1_BENAB | SBUS_CFG1_B16);
 168        } else if (bursts & DMA_BURST8) {
 169                val = (SBUS_CFG1_BENAB | SBUS_CFG1_B8);
 170        } else {
 171                val = 0; /* No sbus bursts for you... */
 172        }
 173        sbus_writew(val, qpti->qregs + SBUS_CFG1);
 174}
 175
 176static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int force)
 177{
 178        int loop_count;
 179        u16 tmp;
 180
 181        if (mbox_param[param[0]] == 0)
 182                return 1;
 183
 184        /* Set SBUS semaphore. */
 185        tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE);
 186        tmp |= SBUS_SEMAPHORE_LCK;
 187        sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE);
 188
 189        /* Wait for host IRQ bit to clear. */
 190        loop_count = DEFAULT_LOOP_COUNT;
 191        while (--loop_count && (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_HIRQ)) {
 192                barrier();
 193                cpu_relax();
 194        }
 195        if (!loop_count)
 196                printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n",
 197                       qpti->qpti_id);
 198
 199        /* Write mailbox command registers. */
 200        switch (mbox_param[param[0]] >> 4) {
 201        case 6: sbus_writew(param[5], qpti->qregs + MBOX5);
 202        case 5: sbus_writew(param[4], qpti->qregs + MBOX4);
 203        case 4: sbus_writew(param[3], qpti->qregs + MBOX3);
 204        case 3: sbus_writew(param[2], qpti->qregs + MBOX2);
 205        case 2: sbus_writew(param[1], qpti->qregs + MBOX1);
 206        case 1: sbus_writew(param[0], qpti->qregs + MBOX0);
 207        }
 208
 209        /* Clear RISC interrupt. */
 210        tmp = sbus_readw(qpti->qregs + HCCTRL);
 211        tmp |= HCCTRL_CRIRQ;
 212        sbus_writew(tmp, qpti->qregs + HCCTRL);
 213
 214        /* Clear SBUS semaphore. */
 215        sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
 216
 217        /* Set HOST interrupt. */
 218        tmp = sbus_readw(qpti->qregs + HCCTRL);
 219        tmp |= HCCTRL_SHIRQ;
 220        sbus_writew(tmp, qpti->qregs + HCCTRL);
 221
 222        /* Wait for HOST interrupt clears. */
 223        loop_count = DEFAULT_LOOP_COUNT;
 224        while (--loop_count &&
 225               (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ))
 226                udelay(20);
 227        if (!loop_count)
 228                printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n",
 229                       qpti->qpti_id, param[0]);
 230
 231        /* Wait for SBUS semaphore to get set. */
 232        loop_count = DEFAULT_LOOP_COUNT;
 233        while (--loop_count &&
 234               !(sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK)) {
 235                udelay(20);
 236
 237                /* Workaround for some buggy chips. */
 238                if (sbus_readw(qpti->qregs + MBOX0) & 0x4000)
 239                        break;
 240        }
 241        if (!loop_count)
 242                printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n",
 243                       qpti->qpti_id, param[0]);
 244
 245        /* Wait for MBOX busy condition to go away. */
 246        loop_count = DEFAULT_LOOP_COUNT;
 247        while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04))
 248                udelay(20);
 249        if (!loop_count)
 250                printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n",
 251                       qpti->qpti_id, param[0]);
 252
 253        /* Read back output parameters. */
 254        switch (mbox_param[param[0]] & 0xf) {
 255        case 6: param[5] = sbus_readw(qpti->qregs + MBOX5);
 256        case 5: param[4] = sbus_readw(qpti->qregs + MBOX4);
 257        case 4: param[3] = sbus_readw(qpti->qregs + MBOX3);
 258        case 3: param[2] = sbus_readw(qpti->qregs + MBOX2);
 259        case 2: param[1] = sbus_readw(qpti->qregs + MBOX1);
 260        case 1: param[0] = sbus_readw(qpti->qregs + MBOX0);
 261        }
 262
 263        /* Clear RISC interrupt. */
 264        tmp = sbus_readw(qpti->qregs + HCCTRL);
 265        tmp |= HCCTRL_CRIRQ;
 266        sbus_writew(tmp, qpti->qregs + HCCTRL);
 267
 268        /* Release SBUS semaphore. */
 269        tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE);
 270        tmp &= ~(SBUS_SEMAPHORE_LCK);
 271        sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE);
 272
 273        /* We're done. */
 274        return 0;
 275}
 276
 277static inline void qlogicpti_set_hostdev_defaults(struct qlogicpti *qpti)
 278{
 279        int i;
 280
 281        qpti->host_param.initiator_scsi_id = qpti->scsi_id;
 282        qpti->host_param.bus_reset_delay = 3;
 283        qpti->host_param.retry_count = 0;
 284        qpti->host_param.retry_delay = 5;
 285        qpti->host_param.async_data_setup_time = 3;
 286        qpti->host_param.req_ack_active_negation = 1;
 287        qpti->host_param.data_line_active_negation = 1;
 288        qpti->host_param.data_dma_burst_enable = 1;
 289        qpti->host_param.command_dma_burst_enable = 1;
 290        qpti->host_param.tag_aging = 8;
 291        qpti->host_param.selection_timeout = 250;
 292        qpti->host_param.max_queue_depth = 256;
 293
 294        for(i = 0; i < MAX_TARGETS; i++) {
 295                /*
 296                 * disconnect, parity, arq, reneg on reset, and, oddly enough
 297                 * tags...the midlayer's notion of tagged support has to match
 298                 * our device settings, and since we base whether we enable a
 299                 * tag on a  per-cmnd basis upon what the midlayer sez, we
 300                 * actually enable the capability here.
 301                 */
 302                qpti->dev_param[i].device_flags = 0xcd;
 303                qpti->dev_param[i].execution_throttle = 16;
 304                if (qpti->ultra) {
 305                        qpti->dev_param[i].synchronous_period = 12;
 306                        qpti->dev_param[i].synchronous_offset = 8;
 307                } else {
 308                        qpti->dev_param[i].synchronous_period = 25;
 309                        qpti->dev_param[i].synchronous_offset = 12;
 310                }
 311                qpti->dev_param[i].device_enable = 1;
 312        }
 313}
 314
 315static int qlogicpti_reset_hardware(struct Scsi_Host *host)
 316{
 317        struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
 318        u_short param[6];
 319        unsigned short risc_code_addr;
 320        int loop_count, i;
 321        unsigned long flags;
 322
 323        risc_code_addr = 0x1000;        /* all load addresses are at 0x1000 */
 324
 325        spin_lock_irqsave(host->host_lock, flags);
 326
 327        sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
 328
 329        /* Only reset the scsi bus if it is not free. */
 330        if (sbus_readw(qpti->qregs + CPU_PCTRL) & CPU_PCTRL_BSY) {
 331                sbus_writew(CPU_ORIDE_RMOD, qpti->qregs + CPU_ORIDE);
 332                sbus_writew(CPU_CMD_BRESET, qpti->qregs + CPU_CMD);
 333                udelay(400);
 334        }
 335
 336        sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL);
 337        sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL);
 338        sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL);
 339
 340        loop_count = DEFAULT_LOOP_COUNT;
 341        while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04))
 342                udelay(20);
 343        if (!loop_count)
 344                printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n",
 345                       qpti->qpti_id);
 346
 347        sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
 348        set_sbus_cfg1(qpti);
 349        qlogicpti_enable_irqs(qpti);
 350
 351        if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) {
 352                qpti->ultra = 1;
 353                sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA),
 354                            qpti->qregs + RISC_MTREG);
 355        } else {
 356                qpti->ultra = 0;
 357                sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT),
 358                            qpti->qregs + RISC_MTREG);
 359        }
 360
 361        /* reset adapter and per-device default values. */
 362        /* do it after finding out whether we're ultra mode capable */
 363        qlogicpti_set_hostdev_defaults(qpti);
 364
 365        /* Release the RISC processor. */
 366        sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
 367
 368        /* Get RISC to start executing the firmware code. */
 369        param[0] = MBOX_EXEC_FIRMWARE;
 370        param[1] = risc_code_addr;
 371        if (qlogicpti_mbox_command(qpti, param, 1)) {
 372                printk(KERN_EMERG "qlogicpti%d: Cannot execute ISP firmware.\n",
 373                       qpti->qpti_id);
 374                spin_unlock_irqrestore(host->host_lock, flags);
 375                return 1;
 376        }
 377
 378        /* Set initiator scsi ID. */
 379        param[0] = MBOX_SET_INIT_SCSI_ID;
 380        param[1] = qpti->host_param.initiator_scsi_id;
 381        if (qlogicpti_mbox_command(qpti, param, 1) ||
 382           (param[0] != MBOX_COMMAND_COMPLETE)) {
 383                printk(KERN_EMERG "qlogicpti%d: Cannot set initiator SCSI ID.\n",
 384                       qpti->qpti_id);
 385                spin_unlock_irqrestore(host->host_lock, flags);
 386                return 1;
 387        }
 388
 389        /* Initialize state of the queues, both hw and sw. */
 390        qpti->req_in_ptr = qpti->res_out_ptr = 0;
 391
 392        param[0] = MBOX_INIT_RES_QUEUE;
 393        param[1] = RES_QUEUE_LEN + 1;
 394        param[2] = (u_short) (qpti->res_dvma >> 16);
 395        param[3] = (u_short) (qpti->res_dvma & 0xffff);
 396        param[4] = param[5] = 0;
 397        if (qlogicpti_mbox_command(qpti, param, 1)) {
 398                printk(KERN_EMERG "qlogicpti%d: Cannot init response queue.\n",
 399                       qpti->qpti_id);
 400                spin_unlock_irqrestore(host->host_lock, flags);
 401                return 1;
 402        }
 403
 404        param[0] = MBOX_INIT_REQ_QUEUE;
 405        param[1] = QLOGICPTI_REQ_QUEUE_LEN + 1;
 406        param[2] = (u_short) (qpti->req_dvma >> 16);
 407        param[3] = (u_short) (qpti->req_dvma & 0xffff);
 408        param[4] = param[5] = 0;
 409        if (qlogicpti_mbox_command(qpti, param, 1)) {
 410                printk(KERN_EMERG "qlogicpti%d: Cannot init request queue.\n",
 411                       qpti->qpti_id);
 412                spin_unlock_irqrestore(host->host_lock, flags);
 413                return 1;
 414        }
 415
 416        param[0] = MBOX_SET_RETRY_COUNT;
 417        param[1] = qpti->host_param.retry_count;
 418        param[2] = qpti->host_param.retry_delay;
 419        qlogicpti_mbox_command(qpti, param, 0);
 420
 421        param[0] = MBOX_SET_TAG_AGE_LIMIT;
 422        param[1] = qpti->host_param.tag_aging;
 423        qlogicpti_mbox_command(qpti, param, 0);
 424
 425        for (i = 0; i < MAX_TARGETS; i++) {
 426                param[0] = MBOX_GET_DEV_QUEUE_PARAMS;
 427                param[1] = (i << 8);
 428                qlogicpti_mbox_command(qpti, param, 0);
 429        }
 430
 431        param[0] = MBOX_GET_FIRMWARE_STATUS;
 432        qlogicpti_mbox_command(qpti, param, 0);
 433
 434        param[0] = MBOX_SET_SELECT_TIMEOUT;
 435        param[1] = qpti->host_param.selection_timeout;
 436        qlogicpti_mbox_command(qpti, param, 0);
 437
 438        for (i = 0; i < MAX_TARGETS; i++) {
 439                param[0] = MBOX_SET_TARGET_PARAMS;
 440                param[1] = (i << 8);
 441                param[2] = (qpti->dev_param[i].device_flags << 8);
 442                /*
 443                 * Since we're now loading 1.31 f/w, force narrow/async.
 444                 */
 445                param[2] |= 0xc0;
 446                param[3] = 0;   /* no offset, we do not have sync mode yet */
 447                qlogicpti_mbox_command(qpti, param, 0);
 448        }
 449
 450        /*
 451         * Always (sigh) do an initial bus reset (kicks f/w).
 452         */
 453        param[0] = MBOX_BUS_RESET;
 454        param[1] = qpti->host_param.bus_reset_delay;
 455        qlogicpti_mbox_command(qpti, param, 0);
 456        qpti->send_marker = 1;
 457
 458        spin_unlock_irqrestore(host->host_lock, flags);
 459        return 0;
 460}
 461
 462#define PTI_RESET_LIMIT 400
 463
 464static int qlogicpti_load_firmware(struct qlogicpti *qpti)
 465{
 466        const struct firmware *fw;
 467        const char fwname[] = "qlogic/isp1000.bin";
 468        const __le16 *fw_data;
 469        struct Scsi_Host *host = qpti->qhost;
 470        unsigned short csum = 0;
 471        unsigned short param[6];
 472        unsigned short risc_code_addr, risc_code_length;
 473        int err;
 474        unsigned long flags;
 475        int i, timeout;
 476
 477        err = request_firmware(&fw, fwname, &qpti->op->dev);
 478        if (err) {
 479                printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
 480                       fwname, err);
 481                return err;
 482        }
 483        if (fw->size % 2) {
 484                printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
 485                       fw->size, fwname);
 486                err = -EINVAL;
 487                goto outfirm;
 488        }
 489        fw_data = (const __le16 *)&fw->data[0];
 490        risc_code_addr = 0x1000;        /* all f/w modules load at 0x1000 */
 491        risc_code_length = fw->size / 2;
 492
 493        spin_lock_irqsave(host->host_lock, flags);
 494
 495        /* Verify the checksum twice, one before loading it, and once
 496         * afterwards via the mailbox commands.
 497         */
 498        for (i = 0; i < risc_code_length; i++)
 499                csum += __le16_to_cpu(fw_data[i]);
 500        if (csum) {
 501                printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!",
 502                       qpti->qpti_id);
 503                err = 1;
 504                goto out;
 505        }               
 506        sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL);
 507        sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL);
 508        sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL);
 509        timeout = PTI_RESET_LIMIT;
 510        while (--timeout && (sbus_readw(qpti->qregs + SBUS_CTRL) & SBUS_CTRL_RESET))
 511                udelay(20);
 512        if (!timeout) {
 513                printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id);
 514                err = 1;
 515                goto out;
 516        }
 517
 518        sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL);
 519        mdelay(1);
 520
 521        sbus_writew((SBUS_CTRL_GENAB | SBUS_CTRL_ERIRQ), qpti->qregs + SBUS_CTRL);
 522        set_sbus_cfg1(qpti);
 523        sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
 524
 525        if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) {
 526                qpti->ultra = 1;
 527                sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA),
 528                            qpti->qregs + RISC_MTREG);
 529        } else {
 530                qpti->ultra = 0;
 531                sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT),
 532                            qpti->qregs + RISC_MTREG);
 533        }
 534
 535        sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
 536
 537        /* Pin lines are only stable while RISC is paused. */
 538        sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
 539        if (sbus_readw(qpti->qregs + CPU_PDIFF) & CPU_PDIFF_MODE)
 540                qpti->differential = 1;
 541        else
 542                qpti->differential = 0;
 543        sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
 544
 545        /* This shouldn't be necessary- we've reset things so we should be
 546           running from the ROM now.. */
 547
 548        param[0] = MBOX_STOP_FIRMWARE;
 549        param[1] = param[2] = param[3] = param[4] = param[5] = 0;
 550        if (qlogicpti_mbox_command(qpti, param, 1)) {
 551                printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n",
 552                       qpti->qpti_id);
 553                err = 1;
 554                goto out;
 555        }               
 556
 557        /* Load it up.. */
 558        for (i = 0; i < risc_code_length; i++) {
 559                param[0] = MBOX_WRITE_RAM_WORD;
 560                param[1] = risc_code_addr + i;
 561                param[2] = __le16_to_cpu(fw_data[i]);
 562                if (qlogicpti_mbox_command(qpti, param, 1) ||
 563                    param[0] != MBOX_COMMAND_COMPLETE) {
 564                        printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n",
 565                               qpti->qpti_id);
 566                        err = 1;
 567                        goto out;
 568                }
 569        }
 570
 571        /* Reset the ISP again. */
 572        sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL);
 573        mdelay(1);
 574
 575        qlogicpti_enable_irqs(qpti);
 576        sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
 577        sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
 578
 579        /* Ask ISP to verify the checksum of the new code. */
 580        param[0] = MBOX_VERIFY_CHECKSUM;
 581        param[1] = risc_code_addr;
 582        if (qlogicpti_mbox_command(qpti, param, 1) ||
 583            (param[0] != MBOX_COMMAND_COMPLETE)) {
 584                printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n",
 585                       qpti->qpti_id);
 586                err = 1;
 587                goto out;
 588        }
 589
 590        /* Start using newly downloaded firmware. */
 591        param[0] = MBOX_EXEC_FIRMWARE;
 592        param[1] = risc_code_addr;
 593        qlogicpti_mbox_command(qpti, param, 1);
 594
 595        param[0] = MBOX_ABOUT_FIRMWARE;
 596        if (qlogicpti_mbox_command(qpti, param, 1) ||
 597            (param[0] != MBOX_COMMAND_COMPLETE)) {
 598                printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n",
 599                       qpti->qpti_id);
 600                err = 1;
 601                goto out;
 602        }
 603
 604        /* Snag the major and minor revisions from the result. */
 605        qpti->fware_majrev = param[1];
 606        qpti->fware_minrev = param[2];
 607        qpti->fware_micrev = param[3];
 608
 609        /* Set the clock rate */
 610        param[0] = MBOX_SET_CLOCK_RATE;
 611        param[1] = qpti->clock;
 612        if (qlogicpti_mbox_command(qpti, param, 1) ||
 613            (param[0] != MBOX_COMMAND_COMPLETE)) {
 614                printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n",
 615                       qpti->qpti_id);
 616                err = 1;
 617                goto out;
 618        }
 619
 620        if (qpti->is_pti != 0) {
 621                /* Load scsi initiator ID and interrupt level into sbus static ram. */
 622                param[0] = MBOX_WRITE_RAM_WORD;
 623                param[1] = 0xff80;
 624                param[2] = (unsigned short) qpti->scsi_id;
 625                qlogicpti_mbox_command(qpti, param, 1);
 626
 627                param[0] = MBOX_WRITE_RAM_WORD;
 628                param[1] = 0xff00;
 629                param[2] = (unsigned short) 3;
 630                qlogicpti_mbox_command(qpti, param, 1);
 631        }
 632
 633out:
 634        spin_unlock_irqrestore(host->host_lock, flags);
 635outfirm:
 636        release_firmware(fw);
 637        return err;
 638}
 639
 640static int qlogicpti_verify_tmon(struct qlogicpti *qpti)
 641{
 642        int curstat = sbus_readb(qpti->sreg);
 643
 644        curstat &= 0xf0;
 645        if (!(curstat & SREG_FUSE) && (qpti->swsreg & SREG_FUSE))
 646                printk("qlogicpti%d: Fuse returned to normal state.\n", qpti->qpti_id);
 647        if (!(curstat & SREG_TPOWER) && (qpti->swsreg & SREG_TPOWER))
 648                printk("qlogicpti%d: termpwr back to normal state.\n", qpti->qpti_id);
 649        if (curstat != qpti->swsreg) {
 650                int error = 0;
 651                if (curstat & SREG_FUSE) {
 652                        error++;
 653                        printk("qlogicpti%d: Fuse is open!\n", qpti->qpti_id);
 654                }
 655                if (curstat & SREG_TPOWER) {
 656                        error++;
 657                        printk("qlogicpti%d: termpwr failure\n", qpti->qpti_id);
 658                }
 659                if (qpti->differential &&
 660                    (curstat & SREG_DSENSE) != SREG_DSENSE) {
 661                        error++;
 662                        printk("qlogicpti%d: You have a single ended device on a "
 663                               "differential bus!  Please fix!\n", qpti->qpti_id);
 664                }
 665                qpti->swsreg = curstat;
 666                return error;
 667        }
 668        return 0;
 669}
 670
 671static irqreturn_t qpti_intr(int irq, void *dev_id);
 672
 673static void qpti_chain_add(struct qlogicpti *qpti)
 674{
 675        spin_lock_irq(&qptichain_lock);
 676        if (qptichain != NULL) {
 677                struct qlogicpti *qlink = qptichain;
 678
 679                while(qlink->next)
 680                        qlink = qlink->next;
 681                qlink->next = qpti;
 682        } else {
 683                qptichain = qpti;
 684        }
 685        qpti->next = NULL;
 686        spin_unlock_irq(&qptichain_lock);
 687}
 688
 689static void qpti_chain_del(struct qlogicpti *qpti)
 690{
 691        spin_lock_irq(&qptichain_lock);
 692        if (qptichain == qpti) {
 693                qptichain = qpti->next;
 694        } else {
 695                struct qlogicpti *qlink = qptichain;
 696                while(qlink->next != qpti)
 697                        qlink = qlink->next;
 698                qlink->next = qpti->next;
 699        }
 700        qpti->next = NULL;
 701        spin_unlock_irq(&qptichain_lock);
 702}
 703
 704static int qpti_map_regs(struct qlogicpti *qpti)
 705{
 706        struct platform_device *op = qpti->op;
 707
 708        qpti->qregs = of_ioremap(&op->resource[0], 0,
 709                                 resource_size(&op->resource[0]),
 710                                 "PTI Qlogic/ISP");
 711        if (!qpti->qregs) {
 712                printk("PTI: Qlogic/ISP registers are unmappable\n");
 713                return -ENODEV;
 714        }
 715        if (qpti->is_pti) {
 716                qpti->sreg = of_ioremap(&op->resource[0], (16 * 4096),
 717                                        sizeof(unsigned char),
 718                                        "PTI Qlogic/ISP statreg");
 719                if (!qpti->sreg) {
 720                        printk("PTI: Qlogic/ISP status register is unmappable\n");
 721                        return -ENODEV;
 722                }
 723        }
 724        return 0;
 725}
 726
 727static int qpti_register_irq(struct qlogicpti *qpti)
 728{
 729        struct platform_device *op = qpti->op;
 730
 731        qpti->qhost->irq = qpti->irq = op->archdata.irqs[0];
 732
 733        /* We used to try various overly-clever things to
 734         * reduce the interrupt processing overhead on
 735         * sun4c/sun4m when multiple PTI's shared the
 736         * same IRQ.  It was too complex and messy to
 737         * sanely maintain.
 738         */
 739        if (request_irq(qpti->irq, qpti_intr,
 740                        IRQF_SHARED, "QlogicPTI", qpti))
 741                goto fail;
 742
 743        printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
 744
 745        return 0;
 746
 747fail:
 748        printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id);
 749        return -1;
 750}
 751
 752static void qpti_get_scsi_id(struct qlogicpti *qpti)
 753{
 754        struct platform_device *op = qpti->op;
 755        struct device_node *dp;
 756
 757        dp = op->dev.of_node;
 758
 759        qpti->scsi_id = of_getintprop_default(dp, "initiator-id", -1);
 760        if (qpti->scsi_id == -1)
 761                qpti->scsi_id = of_getintprop_default(dp, "scsi-initiator-id",
 762                                                      -1);
 763        if (qpti->scsi_id == -1)
 764                qpti->scsi_id =
 765                        of_getintprop_default(dp->parent,
 766                                              "scsi-initiator-id", 7);
 767        qpti->qhost->this_id = qpti->scsi_id;
 768        qpti->qhost->max_sectors = 64;
 769
 770        printk("SCSI ID %d ", qpti->scsi_id);
 771}
 772
 773static void qpti_get_bursts(struct qlogicpti *qpti)
 774{
 775        struct platform_device *op = qpti->op;
 776        u8 bursts, bmask;
 777
 778        bursts = of_getintprop_default(op->dev.of_node, "burst-sizes", 0xff);
 779        bmask = of_getintprop_default(op->dev.of_node->parent, "burst-sizes", 0xff);
 780        if (bmask != 0xff)
 781                bursts &= bmask;
 782        if (bursts == 0xff ||
 783            (bursts & DMA_BURST16) == 0 ||
 784            (bursts & DMA_BURST32) == 0)
 785                bursts = (DMA_BURST32 - 1);
 786
 787        qpti->bursts = bursts;
 788}
 789
 790static void qpti_get_clock(struct qlogicpti *qpti)
 791{
 792        unsigned int cfreq;
 793
 794        /* Check for what the clock input to this card is.
 795         * Default to 40Mhz.
 796         */
 797        cfreq = prom_getintdefault(qpti->prom_node,"clock-frequency",40000000);
 798        qpti->clock = (cfreq + 500000)/1000000;
 799        if (qpti->clock == 0) /* bullshit */
 800                qpti->clock = 40;
 801}
 802
 803/* The request and response queues must each be aligned
 804 * on a page boundary.
 805 */
 806static int qpti_map_queues(struct qlogicpti *qpti)
 807{
 808        struct platform_device *op = qpti->op;
 809
 810#define QSIZE(entries)  (((entries) + 1) * QUEUE_ENTRY_LEN)
 811        qpti->res_cpu = dma_alloc_coherent(&op->dev,
 812                                           QSIZE(RES_QUEUE_LEN),
 813                                           &qpti->res_dvma, GFP_ATOMIC);
 814        if (qpti->res_cpu == NULL ||
 815            qpti->res_dvma == 0) {
 816                printk("QPTI: Cannot map response queue.\n");
 817                return -1;
 818        }
 819
 820        qpti->req_cpu = dma_alloc_coherent(&op->dev,
 821                                           QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
 822                                           &qpti->req_dvma, GFP_ATOMIC);
 823        if (qpti->req_cpu == NULL ||
 824            qpti->req_dvma == 0) {
 825                dma_free_coherent(&op->dev, QSIZE(RES_QUEUE_LEN),
 826                                  qpti->res_cpu, qpti->res_dvma);
 827                printk("QPTI: Cannot map request queue.\n");
 828                return -1;
 829        }
 830        memset(qpti->res_cpu, 0, QSIZE(RES_QUEUE_LEN));
 831        memset(qpti->req_cpu, 0, QSIZE(QLOGICPTI_REQ_QUEUE_LEN));
 832        return 0;
 833}
 834
 835const char *qlogicpti_info(struct Scsi_Host *host)
 836{
 837        static char buf[80];
 838        struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
 839
 840        sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %d regs at %p",
 841                qpti->qhost->irq, qpti->qregs);
 842        return buf;
 843}
 844
 845/* I am a certified frobtronicist. */
 846static inline void marker_frob(struct Command_Entry *cmd)
 847{
 848        struct Marker_Entry *marker = (struct Marker_Entry *) cmd;
 849
 850        memset(marker, 0, sizeof(struct Marker_Entry));
 851        marker->hdr.entry_cnt = 1;
 852        marker->hdr.entry_type = ENTRY_MARKER;
 853        marker->modifier = SYNC_ALL;
 854        marker->rsvd = 0;
 855}
 856
 857static inline void cmd_frob(struct Command_Entry *cmd, struct scsi_cmnd *Cmnd,
 858                            struct qlogicpti *qpti)
 859{
 860        memset(cmd, 0, sizeof(struct Command_Entry));
 861        cmd->hdr.entry_cnt = 1;
 862        cmd->hdr.entry_type = ENTRY_COMMAND;
 863        cmd->target_id = Cmnd->device->id;
 864        cmd->target_lun = Cmnd->device->lun;
 865        cmd->cdb_length = Cmnd->cmd_len;
 866        cmd->control_flags = 0;
 867        if (Cmnd->device->tagged_supported) {
 868                if (qpti->cmd_count[Cmnd->device->id] == 0)
 869                        qpti->tag_ages[Cmnd->device->id] = jiffies;
 870                if (time_after(jiffies, qpti->tag_ages[Cmnd->device->id] + (5*HZ))) {
 871                        cmd->control_flags = CFLAG_ORDERED_TAG;
 872                        qpti->tag_ages[Cmnd->device->id] = jiffies;
 873                } else
 874                        cmd->control_flags = CFLAG_SIMPLE_TAG;
 875        }
 876        if ((Cmnd->cmnd[0] == WRITE_6) ||
 877            (Cmnd->cmnd[0] == WRITE_10) ||
 878            (Cmnd->cmnd[0] == WRITE_12))
 879                cmd->control_flags |= CFLAG_WRITE;
 880        else
 881                cmd->control_flags |= CFLAG_READ;
 882        cmd->time_out = Cmnd->request->timeout/HZ;
 883        memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len);
 884}
 885
 886/* Do it to it baby. */
 887static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd,
 888                           struct qlogicpti *qpti, u_int in_ptr, u_int out_ptr)
 889{
 890        struct dataseg *ds;
 891        struct scatterlist *sg, *s;
 892        int i, n;
 893
 894        if (scsi_bufflen(Cmnd)) {
 895                int sg_count;
 896
 897                sg = scsi_sglist(Cmnd);
 898                sg_count = dma_map_sg(&qpti->op->dev, sg,
 899                                      scsi_sg_count(Cmnd),
 900                                      Cmnd->sc_data_direction);
 901
 902                ds = cmd->dataseg;
 903                cmd->segment_cnt = sg_count;
 904
 905                /* Fill in first four sg entries: */
 906                n = sg_count;
 907                if (n > 4)
 908                        n = 4;
 909                for_each_sg(sg, s, n, i) {
 910                        ds[i].d_base = sg_dma_address(s);
 911                        ds[i].d_count = sg_dma_len(s);
 912                }
 913                sg_count -= 4;
 914                sg = s;
 915                while (sg_count > 0) {
 916                        struct Continuation_Entry *cont;
 917
 918                        ++cmd->hdr.entry_cnt;
 919                        cont = (struct Continuation_Entry *) &qpti->req_cpu[in_ptr];
 920                        in_ptr = NEXT_REQ_PTR(in_ptr);
 921                        if (in_ptr == out_ptr)
 922                                return -1;
 923
 924                        cont->hdr.entry_type = ENTRY_CONTINUATION;
 925                        cont->hdr.entry_cnt = 0;
 926                        cont->hdr.sys_def_1 = 0;
 927                        cont->hdr.flags = 0;
 928                        cont->reserved = 0;
 929                        ds = cont->dataseg;
 930                        n = sg_count;
 931                        if (n > 7)
 932                                n = 7;
 933                        for_each_sg(sg, s, n, i) {
 934                                ds[i].d_base = sg_dma_address(s);
 935                                ds[i].d_count = sg_dma_len(s);
 936                        }
 937                        sg_count -= n;
 938                        sg = s;
 939                }
 940        } else {
 941                cmd->dataseg[0].d_base = 0;
 942                cmd->dataseg[0].d_count = 0;
 943                cmd->segment_cnt = 1; /* Shouldn't this be 0? */
 944        }
 945
 946        /* Committed, record Scsi_Cmd so we can find it later. */
 947        cmd->handle = in_ptr;
 948        qpti->cmd_slots[in_ptr] = Cmnd;
 949
 950        qpti->cmd_count[Cmnd->device->id]++;
 951        sbus_writew(in_ptr, qpti->qregs + MBOX4);
 952        qpti->req_in_ptr = in_ptr;
 953
 954        return in_ptr;
 955}
 956
 957static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int out_ptr)
 958{
 959        /* Temporary workaround until bug is found and fixed (one bug has been found
 960           already, but fixing it makes things even worse) -jj */
 961        int num_free = QLOGICPTI_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr) - 64;
 962        host->can_queue = atomic_read(&host->host_busy) + num_free;
 963        host->sg_tablesize = QLOGICPTI_MAX_SG(num_free);
 964}
 965
 966static int qlogicpti_slave_configure(struct scsi_device *sdev)
 967{
 968        struct qlogicpti *qpti = shost_priv(sdev->host);
 969        int tgt = sdev->id;
 970        u_short param[6];
 971
 972        /* tags handled in midlayer */
 973        /* enable sync mode? */
 974        if (sdev->sdtr) {
 975                qpti->dev_param[tgt].device_flags |= 0x10;
 976        } else {
 977                qpti->dev_param[tgt].synchronous_offset = 0;
 978                qpti->dev_param[tgt].synchronous_period = 0;
 979        }
 980        /* are we wide capable? */
 981        if (sdev->wdtr)
 982                qpti->dev_param[tgt].device_flags |= 0x20;
 983
 984        param[0] = MBOX_SET_TARGET_PARAMS;
 985        param[1] = (tgt << 8);
 986        param[2] = (qpti->dev_param[tgt].device_flags << 8);
 987        if (qpti->dev_param[tgt].device_flags & 0x10) {
 988                param[3] = (qpti->dev_param[tgt].synchronous_offset << 8) |
 989                        qpti->dev_param[tgt].synchronous_period;
 990        } else {
 991                param[3] = 0;
 992        }
 993        qlogicpti_mbox_command(qpti, param, 0);
 994        return 0;
 995}
 996
 997/*
 998 * The middle SCSI layer ensures that queuecommand never gets invoked
 999 * concurrently with itself or the interrupt handler (though the
1000 * interrupt handler may call this routine as part of
1001 * request-completion handling).
1002 *
1003 * "This code must fly." -davem
1004 */
1005static int qlogicpti_queuecommand_lck(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
1006{
1007        struct Scsi_Host *host = Cmnd->device->host;
1008        struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
1009        struct Command_Entry *cmd;
1010        u_int out_ptr;
1011        int in_ptr;
1012
1013        Cmnd->scsi_done = done;
1014
1015        in_ptr = qpti->req_in_ptr;
1016        cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr];
1017        out_ptr = sbus_readw(qpti->qregs + MBOX4);
1018        in_ptr = NEXT_REQ_PTR(in_ptr);
1019        if (in_ptr == out_ptr)
1020                goto toss_command;
1021
1022        if (qpti->send_marker) {
1023                marker_frob(cmd);
1024                qpti->send_marker = 0;
1025                if (NEXT_REQ_PTR(in_ptr) == out_ptr) {
1026                        sbus_writew(in_ptr, qpti->qregs + MBOX4);
1027                        qpti->req_in_ptr = in_ptr;
1028                        goto toss_command;
1029                }
1030                cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr];
1031                in_ptr = NEXT_REQ_PTR(in_ptr);
1032        }
1033        cmd_frob(cmd, Cmnd, qpti);
1034        if ((in_ptr = load_cmd(Cmnd, cmd, qpti, in_ptr, out_ptr)) == -1)
1035                goto toss_command;
1036
1037        update_can_queue(host, in_ptr, out_ptr);
1038
1039        return 0;
1040
1041toss_command:
1042        printk(KERN_EMERG "qlogicpti%d: request queue overflow\n",
1043               qpti->qpti_id);
1044
1045        /* Unfortunately, unless you use the new EH code, which
1046         * we don't, the midlayer will ignore the return value,
1047         * which is insane.  We pick up the pieces like this.
1048         */
1049        Cmnd->result = DID_BUS_BUSY;
1050        done(Cmnd);
1051        return 1;
1052}
1053
1054static DEF_SCSI_QCMD(qlogicpti_queuecommand)
1055
1056static int qlogicpti_return_status(struct Status_Entry *sts, int id)
1057{
1058        int host_status = DID_ERROR;
1059
1060        switch (sts->completion_status) {
1061              case CS_COMPLETE:
1062                host_status = DID_OK;
1063                break;
1064              case CS_INCOMPLETE:
1065                if (!(sts->state_flags & SF_GOT_BUS))
1066                        host_status = DID_NO_CONNECT;
1067                else if (!(sts->state_flags & SF_GOT_TARGET))
1068                        host_status = DID_BAD_TARGET;
1069                else if (!(sts->state_flags & SF_SENT_CDB))
1070                        host_status = DID_ERROR;
1071                else if (!(sts->state_flags & SF_TRANSFERRED_DATA))
1072                        host_status = DID_ERROR;
1073                else if (!(sts->state_flags & SF_GOT_STATUS))
1074                        host_status = DID_ERROR;
1075                else if (!(sts->state_flags & SF_GOT_SENSE))
1076                        host_status = DID_ERROR;
1077                break;
1078              case CS_DMA_ERROR:
1079              case CS_TRANSPORT_ERROR:
1080                host_status = DID_ERROR;
1081                break;
1082              case CS_RESET_OCCURRED:
1083              case CS_BUS_RESET:
1084                host_status = DID_RESET;
1085                break;
1086              case CS_ABORTED:
1087                host_status = DID_ABORT;
1088                break;
1089              case CS_TIMEOUT:
1090                host_status = DID_TIME_OUT;
1091                break;
1092              case CS_DATA_OVERRUN:
1093              case CS_COMMAND_OVERRUN:
1094              case CS_STATUS_OVERRUN:
1095              case CS_BAD_MESSAGE:
1096              case CS_NO_MESSAGE_OUT:
1097              case CS_EXT_ID_FAILED:
1098              case CS_IDE_MSG_FAILED:
1099              case CS_ABORT_MSG_FAILED:
1100              case CS_NOP_MSG_FAILED:
1101              case CS_PARITY_ERROR_MSG_FAILED:
1102              case CS_DEVICE_RESET_MSG_FAILED:
1103              case CS_ID_MSG_FAILED:
1104              case CS_UNEXP_BUS_FREE:
1105                host_status = DID_ERROR;
1106                break;
1107              case CS_DATA_UNDERRUN:
1108                host_status = DID_OK;
1109                break;
1110              default:
1111                printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n",
1112                       id, sts->completion_status);
1113                host_status = DID_ERROR;
1114                break;
1115        }
1116
1117        return (sts->scsi_status & STATUS_MASK) | (host_status << 16);
1118}
1119
1120static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti)
1121{
1122        struct scsi_cmnd *Cmnd, *done_queue = NULL;
1123        struct Status_Entry *sts;
1124        u_int in_ptr, out_ptr;
1125
1126        if (!(sbus_readw(qpti->qregs + SBUS_STAT) & SBUS_STAT_RINT))
1127                return NULL;
1128                
1129        in_ptr = sbus_readw(qpti->qregs + MBOX5);
1130        sbus_writew(HCCTRL_CRIRQ, qpti->qregs + HCCTRL);
1131        if (sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK) {
1132                switch (sbus_readw(qpti->qregs + MBOX0)) {
1133                case ASYNC_SCSI_BUS_RESET:
1134                case EXECUTION_TIMEOUT_RESET:
1135                        qpti->send_marker = 1;
1136                        break;
1137                case INVALID_COMMAND:
1138                case HOST_INTERFACE_ERROR:
1139                case COMMAND_ERROR:
1140                case COMMAND_PARAM_ERROR:
1141                        break;
1142                };
1143                sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
1144        }
1145
1146        /* This looks like a network driver! */
1147        out_ptr = qpti->res_out_ptr;
1148        while (out_ptr != in_ptr) {
1149                u_int cmd_slot;
1150
1151                sts = (struct Status_Entry *) &qpti->res_cpu[out_ptr];
1152                out_ptr = NEXT_RES_PTR(out_ptr);
1153
1154                /* We store an index in the handle, not the pointer in
1155                 * some form.  This avoids problems due to the fact
1156                 * that the handle provided is only 32-bits. -DaveM
1157                 */
1158                cmd_slot = sts->handle;
1159                Cmnd = qpti->cmd_slots[cmd_slot];
1160                qpti->cmd_slots[cmd_slot] = NULL;
1161
1162                if (sts->completion_status == CS_RESET_OCCURRED ||
1163                    sts->completion_status == CS_ABORTED ||
1164                    (sts->status_flags & STF_BUS_RESET))
1165                        qpti->send_marker = 1;
1166
1167                if (sts->state_flags & SF_GOT_SENSE)
1168                        memcpy(Cmnd->sense_buffer, sts->req_sense_data,
1169                               SCSI_SENSE_BUFFERSIZE);
1170
1171                if (sts->hdr.entry_type == ENTRY_STATUS)
1172                        Cmnd->result =
1173                            qlogicpti_return_status(sts, qpti->qpti_id);
1174                else
1175                        Cmnd->result = DID_ERROR << 16;
1176
1177                if (scsi_bufflen(Cmnd))
1178                        dma_unmap_sg(&qpti->op->dev,
1179                                     scsi_sglist(Cmnd), scsi_sg_count(Cmnd),
1180                                     Cmnd->sc_data_direction);
1181
1182                qpti->cmd_count[Cmnd->device->id]--;
1183                sbus_writew(out_ptr, qpti->qregs + MBOX5);
1184                Cmnd->host_scribble = (unsigned char *) done_queue;
1185                done_queue = Cmnd;
1186        }
1187        qpti->res_out_ptr = out_ptr;
1188
1189        return done_queue;
1190}
1191
1192static irqreturn_t qpti_intr(int irq, void *dev_id)
1193{
1194        struct qlogicpti *qpti = dev_id;
1195        unsigned long flags;
1196        struct scsi_cmnd *dq;
1197
1198        spin_lock_irqsave(qpti->qhost->host_lock, flags);
1199        dq = qlogicpti_intr_handler(qpti);
1200
1201        if (dq != NULL) {
1202                do {
1203                        struct scsi_cmnd *next;
1204
1205                        next = (struct scsi_cmnd *) dq->host_scribble;
1206                        dq->scsi_done(dq);
1207                        dq = next;
1208                } while (dq != NULL);
1209        }
1210        spin_unlock_irqrestore(qpti->qhost->host_lock, flags);
1211
1212        return IRQ_HANDLED;
1213}
1214
1215static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
1216{
1217        u_short param[6];
1218        struct Scsi_Host *host = Cmnd->device->host;
1219        struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
1220        int return_status = SUCCESS;
1221        u32 cmd_cookie;
1222        int i;
1223
1224        printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n",
1225               qpti->qpti_id, (int)Cmnd->device->id, (int)Cmnd->device->lun);
1226
1227        qlogicpti_disable_irqs(qpti);
1228
1229        /* Find the 32-bit cookie we gave to the firmware for
1230         * this command.
1231         */
1232        for (i = 0; i < QLOGICPTI_REQ_QUEUE_LEN + 1; i++)
1233                if (qpti->cmd_slots[i] == Cmnd)
1234                        break;
1235        cmd_cookie = i;
1236
1237        param[0] = MBOX_ABORT;
1238        param[1] = (((u_short) Cmnd->device->id) << 8) | Cmnd->device->lun;
1239        param[2] = cmd_cookie >> 16;
1240        param[3] = cmd_cookie & 0xffff;
1241        if (qlogicpti_mbox_command(qpti, param, 0) ||
1242            (param[0] != MBOX_COMMAND_COMPLETE)) {
1243                printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n",
1244                       qpti->qpti_id, param[0]);
1245                return_status = FAILED;
1246        }
1247
1248        qlogicpti_enable_irqs(qpti);
1249
1250        return return_status;
1251}
1252
1253static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
1254{
1255        u_short param[6];
1256        struct Scsi_Host *host = Cmnd->device->host;
1257        struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
1258        int return_status = SUCCESS;
1259
1260        printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n",
1261               qpti->qpti_id);
1262
1263        qlogicpti_disable_irqs(qpti);
1264
1265        param[0] = MBOX_BUS_RESET;
1266        param[1] = qpti->host_param.bus_reset_delay;
1267        if (qlogicpti_mbox_command(qpti, param, 0) ||
1268           (param[0] != MBOX_COMMAND_COMPLETE)) {
1269                printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n",
1270                       qpti->qpti_id, param[0]);
1271                return_status = FAILED;
1272        }
1273
1274        qlogicpti_enable_irqs(qpti);
1275
1276        return return_status;
1277}
1278
1279static struct scsi_host_template qpti_template = {
1280        .module                 = THIS_MODULE,
1281        .name                   = "qlogicpti",
1282        .info                   = qlogicpti_info,
1283        .queuecommand           = qlogicpti_queuecommand,
1284        .slave_configure        = qlogicpti_slave_configure,
1285        .eh_abort_handler       = qlogicpti_abort,
1286        .eh_bus_reset_handler   = qlogicpti_reset,
1287        .can_queue              = QLOGICPTI_REQ_QUEUE_LEN,
1288        .this_id                = 7,
1289        .sg_tablesize           = QLOGICPTI_MAX_SG(QLOGICPTI_REQ_QUEUE_LEN),
1290        .use_clustering         = ENABLE_CLUSTERING,
1291};
1292
1293static const struct of_device_id qpti_match[];
1294static int qpti_sbus_probe(struct platform_device *op)
1295{
1296        struct device_node *dp = op->dev.of_node;
1297        struct Scsi_Host *host;
1298        struct qlogicpti *qpti;
1299        static int nqptis;
1300        const char *fcode;
1301
1302        /* Sometimes Antares cards come up not completely
1303         * setup, and we get a report of a zero IRQ.
1304         */
1305        if (op->archdata.irqs[0] == 0)
1306                return -ENODEV;
1307
1308        host = scsi_host_alloc(&qpti_template, sizeof(struct qlogicpti));
1309        if (!host)
1310                return -ENOMEM;
1311
1312        qpti = shost_priv(host);
1313
1314        host->max_id = MAX_TARGETS;
1315        qpti->qhost = host;
1316        qpti->op = op;
1317        qpti->qpti_id = nqptis;
1318        strcpy(qpti->prom_name, op->dev.of_node->name);
1319        qpti->is_pti = strcmp(qpti->prom_name, "QLGC,isp");
1320
1321        if (qpti_map_regs(qpti) < 0)
1322                goto fail_unlink;
1323
1324        if (qpti_register_irq(qpti) < 0)
1325                goto fail_unmap_regs;
1326
1327        qpti_get_scsi_id(qpti);
1328        qpti_get_bursts(qpti);
1329        qpti_get_clock(qpti);
1330
1331        /* Clear out scsi_cmnd array. */
1332        memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots));
1333
1334        if (qpti_map_queues(qpti) < 0)
1335                goto fail_free_irq;
1336
1337        /* Load the firmware. */
1338        if (qlogicpti_load_firmware(qpti))
1339                goto fail_unmap_queues;
1340        if (qpti->is_pti) {
1341                /* Check the PTI status reg. */
1342                if (qlogicpti_verify_tmon(qpti))
1343                        goto fail_unmap_queues;
1344        }
1345
1346        /* Reset the ISP and init res/req queues. */
1347        if (qlogicpti_reset_hardware(host))
1348                goto fail_unmap_queues;
1349
1350        printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
1351               qpti->fware_minrev, qpti->fware_micrev);
1352
1353        fcode = of_get_property(dp, "isp-fcode", NULL);
1354        if (fcode && fcode[0])
1355                printk("(FCode %s)", fcode);
1356        if (of_find_property(dp, "differential", NULL) != NULL)
1357                qpti->differential = 1;
1358                        
1359        printk("\nqlogicpti%d: [%s Wide, using %s interface]\n",
1360                qpti->qpti_id,
1361                (qpti->ultra ? "Ultra" : "Fast"),
1362                (qpti->differential ? "differential" : "single ended"));
1363
1364        if (scsi_add_host(host, &op->dev)) {
1365                printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id);
1366                goto fail_unmap_queues;
1367        }
1368
1369        dev_set_drvdata(&op->dev, qpti);
1370
1371        qpti_chain_add(qpti);
1372
1373        scsi_scan_host(host);
1374        nqptis++;
1375
1376        return 0;
1377
1378fail_unmap_queues:
1379#define QSIZE(entries)  (((entries) + 1) * QUEUE_ENTRY_LEN)
1380        dma_free_coherent(&op->dev,
1381                          QSIZE(RES_QUEUE_LEN),
1382                          qpti->res_cpu, qpti->res_dvma);
1383        dma_free_coherent(&op->dev,
1384                          QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
1385                          qpti->req_cpu, qpti->req_dvma);
1386#undef QSIZE
1387
1388fail_unmap_regs:
1389        of_iounmap(&op->resource[0], qpti->qregs,
1390                   resource_size(&op->resource[0]));
1391        if (qpti->is_pti)
1392                of_iounmap(&op->resource[0], qpti->sreg,
1393                           sizeof(unsigned char));
1394
1395fail_free_irq:
1396        free_irq(qpti->irq, qpti);
1397
1398fail_unlink:
1399        scsi_host_put(host);
1400
1401        return -ENODEV;
1402}
1403
1404static int qpti_sbus_remove(struct platform_device *op)
1405{
1406        struct qlogicpti *qpti = dev_get_drvdata(&op->dev);
1407
1408        qpti_chain_del(qpti);
1409
1410        scsi_remove_host(qpti->qhost);
1411
1412        /* Shut up the card. */
1413        sbus_writew(0, qpti->qregs + SBUS_CTRL);
1414
1415        /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */
1416        free_irq(qpti->irq, qpti);
1417
1418#define QSIZE(entries)  (((entries) + 1) * QUEUE_ENTRY_LEN)
1419        dma_free_coherent(&op->dev,
1420                          QSIZE(RES_QUEUE_LEN),
1421                          qpti->res_cpu, qpti->res_dvma);
1422        dma_free_coherent(&op->dev,
1423                          QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
1424                          qpti->req_cpu, qpti->req_dvma);
1425#undef QSIZE
1426
1427        of_iounmap(&op->resource[0], qpti->qregs,
1428                   resource_size(&op->resource[0]));
1429        if (qpti->is_pti)
1430                of_iounmap(&op->resource[0], qpti->sreg, sizeof(unsigned char));
1431
1432        scsi_host_put(qpti->qhost);
1433
1434        return 0;
1435}
1436
1437static const struct of_device_id qpti_match[] = {
1438        {
1439                .name = "ptisp",
1440        },
1441        {
1442                .name = "PTI,ptisp",
1443        },
1444        {
1445                .name = "QLGC,isp",
1446        },
1447        {
1448                .name = "SUNW,isp",
1449        },
1450        {},
1451};
1452MODULE_DEVICE_TABLE(of, qpti_match);
1453
1454static struct platform_driver qpti_sbus_driver = {
1455        .driver = {
1456                .name = "qpti",
1457                .of_match_table = qpti_match,
1458        },
1459        .probe          = qpti_sbus_probe,
1460        .remove         = qpti_sbus_remove,
1461};
1462
1463static int __init qpti_init(void)
1464{
1465        return platform_driver_register(&qpti_sbus_driver);
1466}
1467
1468static void __exit qpti_exit(void)
1469{
1470        platform_driver_unregister(&qpti_sbus_driver);
1471}
1472
1473MODULE_DESCRIPTION("QlogicISP SBUS driver");
1474MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
1475MODULE_LICENSE("GPL");
1476MODULE_VERSION("2.1");
1477MODULE_FIRMWARE("qlogic/isp1000.bin");
1478
1479module_init(qpti_init);
1480module_exit(qpti_exit);
1481