1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/module.h>
15#include <linux/tty.h>
16#include <linux/tty_flip.h>
17#include <linux/ioport.h>
18#include <linux/init.h>
19#include <linux/serial.h>
20#include <linux/console.h>
21#include <linux/sysrq.h>
22#include <linux/device.h>
23
24#include <asm/io.h>
25#include <asm/irq.h>
26#include <asm/mach/irq.h>
27
28#include <mach/regs-uart.h>
29#include <mach/regs-irq.h>
30
31#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
32#define SUPPORT_SYSRQ
33#endif
34
35#include <linux/serial_core.h>
36
37
38#define SERIAL_KS8695_MAJOR 204
39#define SERIAL_KS8695_MINOR 16
40#define SERIAL_KS8695_DEVNAME "ttyAM"
41
42#define SERIAL_KS8695_NR 1
43
44
45
46
47#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF)
48#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH)
49#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC)
50#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC)
51#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS)
52#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS)
53#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC)
54#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC)
55#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC)
56#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC)
57#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD)
58#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD)
59
60#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
61
62#define UART_DUMMY_LSR_RX 0x100
63#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
64
65static inline int tx_enabled(struct uart_port *port)
66{
67 return port->unused[0] & 1;
68}
69
70static inline int rx_enabled(struct uart_port *port)
71{
72 return port->unused[0] & 2;
73}
74
75static inline int ms_enabled(struct uart_port *port)
76{
77 return port->unused[0] & 4;
78}
79
80static inline void ms_enable(struct uart_port *port, int enabled)
81{
82 if(enabled)
83 port->unused[0] |= 4;
84 else
85 port->unused[0] &= ~4;
86}
87
88static inline void rx_enable(struct uart_port *port, int enabled)
89{
90 if(enabled)
91 port->unused[0] |= 2;
92 else
93 port->unused[0] &= ~2;
94}
95
96static inline void tx_enable(struct uart_port *port, int enabled)
97{
98 if(enabled)
99 port->unused[0] |= 1;
100 else
101 port->unused[0] &= ~1;
102}
103
104
105#ifdef SUPPORT_SYSRQ
106static struct console ks8695_console;
107#endif
108
109static void ks8695uart_stop_tx(struct uart_port *port)
110{
111 if (tx_enabled(port)) {
112
113
114
115
116 disable_irq_nosync(KS8695_IRQ_UART_TX);
117 tx_enable(port, 0);
118 }
119}
120
121static void ks8695uart_start_tx(struct uart_port *port)
122{
123 if (!tx_enabled(port)) {
124 enable_irq(KS8695_IRQ_UART_TX);
125 tx_enable(port, 1);
126 }
127}
128
129static void ks8695uart_stop_rx(struct uart_port *port)
130{
131 if (rx_enabled(port)) {
132 disable_irq(KS8695_IRQ_UART_RX);
133 rx_enable(port, 0);
134 }
135}
136
137static void ks8695uart_enable_ms(struct uart_port *port)
138{
139 if (!ms_enabled(port)) {
140 enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
141 ms_enable(port,1);
142 }
143}
144
145static void ks8695uart_disable_ms(struct uart_port *port)
146{
147 if (ms_enabled(port)) {
148 disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
149 ms_enable(port,0);
150 }
151}
152
153static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
154{
155 struct uart_port *port = dev_id;
156 unsigned int status, ch, lsr, flg, max_count = 256;
157
158 status = UART_GET_LSR(port);
159 while ((status & URLS_URDR) && max_count--) {
160 ch = UART_GET_CHAR(port);
161 flg = TTY_NORMAL;
162
163 port->icount.rx++;
164
165
166
167
168
169 lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX;
170 if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) {
171 if (lsr & URLS_URBI) {
172 lsr &= ~(URLS_URFE | URLS_URPE);
173 port->icount.brk++;
174 if (uart_handle_break(port))
175 goto ignore_char;
176 }
177 if (lsr & URLS_URPE)
178 port->icount.parity++;
179 if (lsr & URLS_URFE)
180 port->icount.frame++;
181 if (lsr & URLS_URROE)
182 port->icount.overrun++;
183
184 lsr &= port->read_status_mask;
185
186 if (lsr & URLS_URBI)
187 flg = TTY_BREAK;
188 else if (lsr & URLS_URPE)
189 flg = TTY_PARITY;
190 else if (lsr & URLS_URFE)
191 flg = TTY_FRAME;
192 }
193
194 if (uart_handle_sysrq_char(port, ch))
195 goto ignore_char;
196
197 uart_insert_char(port, lsr, URLS_URROE, ch, flg);
198
199ignore_char:
200 status = UART_GET_LSR(port);
201 }
202 tty_flip_buffer_push(&port->state->port);
203
204 return IRQ_HANDLED;
205}
206
207
208static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
209{
210 struct uart_port *port = dev_id;
211 struct circ_buf *xmit = &port->state->xmit;
212 unsigned int count;
213
214 if (port->x_char) {
215 KS8695_CLR_TX_INT();
216 UART_PUT_CHAR(port, port->x_char);
217 port->icount.tx++;
218 port->x_char = 0;
219 return IRQ_HANDLED;
220 }
221
222 if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
223 ks8695uart_stop_tx(port);
224 return IRQ_HANDLED;
225 }
226
227 count = 16;
228 while (!uart_circ_empty(xmit) && (count-- > 0)) {
229 KS8695_CLR_TX_INT();
230 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
231
232 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
233 port->icount.tx++;
234 }
235
236 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
237 uart_write_wakeup(port);
238
239 if (uart_circ_empty(xmit))
240 ks8695uart_stop_tx(port);
241
242 return IRQ_HANDLED;
243}
244
245static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
246{
247 struct uart_port *port = dev_id;
248 unsigned int status;
249
250
251
252
253 status = UART_GET_MSR(port);
254
255 if (status & URMS_URDDCD)
256 uart_handle_dcd_change(port, status & URMS_URDDCD);
257
258 if (status & URMS_URDDST)
259 port->icount.dsr++;
260
261 if (status & URMS_URDCTS)
262 uart_handle_cts_change(port, status & URMS_URDCTS);
263
264 if (status & URMS_URTERI)
265 port->icount.rng++;
266
267 wake_up_interruptible(&port->state->port.delta_msr_wait);
268
269 return IRQ_HANDLED;
270}
271
272static unsigned int ks8695uart_tx_empty(struct uart_port *port)
273{
274 return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0;
275}
276
277static unsigned int ks8695uart_get_mctrl(struct uart_port *port)
278{
279 unsigned int result = 0;
280 unsigned int status;
281
282 status = UART_GET_MSR(port);
283 if (status & URMS_URDCD)
284 result |= TIOCM_CAR;
285 if (status & URMS_URDSR)
286 result |= TIOCM_DSR;
287 if (status & URMS_URCTS)
288 result |= TIOCM_CTS;
289 if (status & URMS_URRI)
290 result |= TIOCM_RI;
291
292 return result;
293}
294
295static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl)
296{
297 unsigned int mcr;
298
299 mcr = UART_GET_MCR(port);
300 if (mctrl & TIOCM_RTS)
301 mcr |= URMC_URRTS;
302 else
303 mcr &= ~URMC_URRTS;
304
305 if (mctrl & TIOCM_DTR)
306 mcr |= URMC_URDTR;
307 else
308 mcr &= ~URMC_URDTR;
309
310 UART_PUT_MCR(port, mcr);
311}
312
313static void ks8695uart_break_ctl(struct uart_port *port, int break_state)
314{
315 unsigned int lcr;
316
317 lcr = UART_GET_LCR(port);
318
319 if (break_state == -1)
320 lcr |= URLC_URSBC;
321 else
322 lcr &= ~URLC_URSBC;
323
324 UART_PUT_LCR(port, lcr);
325}
326
327static int ks8695uart_startup(struct uart_port *port)
328{
329 int retval;
330
331 irq_modify_status(KS8695_IRQ_UART_TX, IRQ_NOREQUEST, IRQ_NOAUTOEN);
332 tx_enable(port, 0);
333 rx_enable(port, 1);
334 ms_enable(port, 1);
335
336
337
338
339 retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, 0, "UART TX", port);
340 if (retval)
341 goto err_tx;
342
343 retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, 0, "UART RX", port);
344 if (retval)
345 goto err_rx;
346
347 retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, 0, "UART LineStatus", port);
348 if (retval)
349 goto err_ls;
350
351 retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, 0, "UART ModemStatus", port);
352 if (retval)
353 goto err_ms;
354
355 return 0;
356
357err_ms:
358 free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
359err_ls:
360 free_irq(KS8695_IRQ_UART_RX, port);
361err_rx:
362 free_irq(KS8695_IRQ_UART_TX, port);
363err_tx:
364 return retval;
365}
366
367static void ks8695uart_shutdown(struct uart_port *port)
368{
369
370
371
372 free_irq(KS8695_IRQ_UART_RX, port);
373 free_irq(KS8695_IRQ_UART_TX, port);
374 free_irq(KS8695_IRQ_UART_MODEM_STATUS, port);
375 free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
376
377
378 UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC);
379 UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE);
380}
381
382static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
383{
384 unsigned int lcr, fcr = 0;
385 unsigned long flags;
386 unsigned int baud, quot;
387
388
389
390
391 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
392 quot = uart_get_divisor(port, baud);
393
394 switch (termios->c_cflag & CSIZE) {
395 case CS5:
396 lcr = URCL_5;
397 break;
398 case CS6:
399 lcr = URCL_6;
400 break;
401 case CS7:
402 lcr = URCL_7;
403 break;
404 default:
405 lcr = URCL_8;
406 break;
407 }
408
409
410 if (termios->c_cflag & CSTOPB)
411 lcr |= URLC_URSB;
412
413
414 if (termios->c_cflag & PARENB) {
415 if (termios->c_cflag & CMSPAR) {
416 if (termios->c_cflag & PARODD)
417 lcr |= URPE_MARK;
418 else
419 lcr |= URPE_SPACE;
420 }
421 else if (termios->c_cflag & PARODD)
422 lcr |= URPE_ODD;
423 else
424 lcr |= URPE_EVEN;
425 }
426
427 if (port->fifosize > 1)
428 fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE;
429
430 spin_lock_irqsave(&port->lock, flags);
431
432
433
434
435 uart_update_timeout(port, termios->c_cflag, baud);
436
437 port->read_status_mask = URLS_URROE;
438 if (termios->c_iflag & INPCK)
439 port->read_status_mask |= (URLS_URFE | URLS_URPE);
440 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
441 port->read_status_mask |= URLS_URBI;
442
443
444
445
446 port->ignore_status_mask = 0;
447 if (termios->c_iflag & IGNPAR)
448 port->ignore_status_mask |= (URLS_URFE | URLS_URPE);
449 if (termios->c_iflag & IGNBRK) {
450 port->ignore_status_mask |= URLS_URBI;
451
452
453
454
455 if (termios->c_iflag & IGNPAR)
456 port->ignore_status_mask |= URLS_URROE;
457 }
458
459
460
461
462 if ((termios->c_cflag & CREAD) == 0)
463 port->ignore_status_mask |= UART_DUMMY_LSR_RX;
464
465
466 if (UART_ENABLE_MS(port, termios->c_cflag))
467 ks8695uart_enable_ms(port);
468 else
469 ks8695uart_disable_ms(port);
470
471
472 UART_PUT_BRDR(port, quot);
473
474 UART_PUT_LCR(port, lcr);
475 UART_PUT_FCR(port, fcr);
476
477 spin_unlock_irqrestore(&port->lock, flags);
478}
479
480static const char *ks8695uart_type(struct uart_port *port)
481{
482 return port->type == PORT_KS8695 ? "KS8695" : NULL;
483}
484
485
486
487
488static void ks8695uart_release_port(struct uart_port *port)
489{
490 release_mem_region(port->mapbase, UART_PORT_SIZE);
491}
492
493
494
495
496static int ks8695uart_request_port(struct uart_port *port)
497{
498 return request_mem_region(port->mapbase, UART_PORT_SIZE,
499 "serial_ks8695") != NULL ? 0 : -EBUSY;
500}
501
502
503
504
505static void ks8695uart_config_port(struct uart_port *port, int flags)
506{
507 if (flags & UART_CONFIG_TYPE) {
508 port->type = PORT_KS8695;
509 ks8695uart_request_port(port);
510 }
511}
512
513
514
515
516static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser)
517{
518 int ret = 0;
519
520 if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695)
521 ret = -EINVAL;
522 if (ser->irq != port->irq)
523 ret = -EINVAL;
524 if (ser->baud_base < 9600)
525 ret = -EINVAL;
526 return ret;
527}
528
529static struct uart_ops ks8695uart_pops = {
530 .tx_empty = ks8695uart_tx_empty,
531 .set_mctrl = ks8695uart_set_mctrl,
532 .get_mctrl = ks8695uart_get_mctrl,
533 .stop_tx = ks8695uart_stop_tx,
534 .start_tx = ks8695uart_start_tx,
535 .stop_rx = ks8695uart_stop_rx,
536 .enable_ms = ks8695uart_enable_ms,
537 .break_ctl = ks8695uart_break_ctl,
538 .startup = ks8695uart_startup,
539 .shutdown = ks8695uart_shutdown,
540 .set_termios = ks8695uart_set_termios,
541 .type = ks8695uart_type,
542 .release_port = ks8695uart_release_port,
543 .request_port = ks8695uart_request_port,
544 .config_port = ks8695uart_config_port,
545 .verify_port = ks8695uart_verify_port,
546};
547
548static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
549 {
550 .membase = KS8695_UART_VA,
551 .mapbase = KS8695_UART_PA,
552 .iotype = SERIAL_IO_MEM,
553 .irq = KS8695_IRQ_UART_TX,
554 .uartclk = KS8695_CLOCK_RATE * 16,
555 .fifosize = 16,
556 .ops = &ks8695uart_pops,
557 .flags = UPF_BOOT_AUTOCONF,
558 .line = 0,
559 }
560};
561
562#ifdef CONFIG_SERIAL_KS8695_CONSOLE
563static void ks8695_console_putchar(struct uart_port *port, int ch)
564{
565 while (!(UART_GET_LSR(port) & URLS_URTHRE))
566 barrier();
567
568 UART_PUT_CHAR(port, ch);
569}
570
571static void ks8695_console_write(struct console *co, const char *s, u_int count)
572{
573 struct uart_port *port = ks8695uart_ports + co->index;
574
575 uart_console_write(port, s, count, ks8695_console_putchar);
576}
577
578static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
579{
580 unsigned int lcr;
581
582 lcr = UART_GET_LCR(port);
583
584 switch (lcr & URLC_PARITY) {
585 case URPE_ODD:
586 *parity = 'o';
587 break;
588 case URPE_EVEN:
589 *parity = 'e';
590 break;
591 default:
592 *parity = 'n';
593 }
594
595 switch (lcr & URLC_URCL) {
596 case URCL_5:
597 *bits = 5;
598 break;
599 case URCL_6:
600 *bits = 6;
601 break;
602 case URCL_7:
603 *bits = 7;
604 break;
605 default:
606 *bits = 8;
607 }
608
609 *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF);
610 *baud /= 16;
611 *baud &= 0xFFFFFFF0;
612}
613
614static int __init ks8695_console_setup(struct console *co, char *options)
615{
616 struct uart_port *port;
617 int baud = 115200;
618 int bits = 8;
619 int parity = 'n';
620 int flow = 'n';
621
622
623
624
625
626
627 port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co);
628
629 if (options)
630 uart_parse_options(options, &baud, &parity, &bits, &flow);
631 else
632 ks8695_console_get_options(port, &baud, &parity, &bits);
633
634 return uart_set_options(port, co, baud, parity, bits, flow);
635}
636
637static struct uart_driver ks8695_reg;
638
639static struct console ks8695_console = {
640 .name = SERIAL_KS8695_DEVNAME,
641 .write = ks8695_console_write,
642 .device = uart_console_device,
643 .setup = ks8695_console_setup,
644 .flags = CON_PRINTBUFFER,
645 .index = -1,
646 .data = &ks8695_reg,
647};
648
649static int __init ks8695_console_init(void)
650{
651 add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
652 register_console(&ks8695_console);
653 return 0;
654}
655
656console_initcall(ks8695_console_init);
657
658#define KS8695_CONSOLE &ks8695_console
659#else
660#define KS8695_CONSOLE NULL
661#endif
662
663static struct uart_driver ks8695_reg = {
664 .owner = THIS_MODULE,
665 .driver_name = "serial_ks8695",
666 .dev_name = SERIAL_KS8695_DEVNAME,
667 .major = SERIAL_KS8695_MAJOR,
668 .minor = SERIAL_KS8695_MINOR,
669 .nr = SERIAL_KS8695_NR,
670 .cons = KS8695_CONSOLE,
671};
672
673static int __init ks8695uart_init(void)
674{
675 int i, ret;
676
677 printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n");
678
679 ret = uart_register_driver(&ks8695_reg);
680 if (ret)
681 return ret;
682
683 for (i = 0; i < SERIAL_KS8695_NR; i++)
684 uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]);
685
686 return 0;
687}
688
689static void __exit ks8695uart_exit(void)
690{
691 int i;
692
693 for (i = 0; i < SERIAL_KS8695_NR; i++)
694 uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]);
695 uart_unregister_driver(&ks8695_reg);
696}
697
698module_init(ks8695uart_init);
699module_exit(ks8695uart_exit);
700
701MODULE_DESCRIPTION("KS8695 serial port driver");
702MODULE_AUTHOR("Micrel Inc.");
703MODULE_LICENSE("GPL");
704
