/*-
 * Copyright (c) 2003, 2004
 *      Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
 *
 * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr>
 * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl>
 *
 * This software is available to you under a choice of one of two
 * licenses. You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * BSD license below:
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice unmodified, this list of conditions, and the following
 *    disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * GPL license :
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 *
 * HISTORY : some part of the code was base on ueagle 1.3 BSD driver,
 * Damien Bergamini agree to put his code under a DUAL GPL/BSD license.
 *
 * The rest of the code was was rewritten from scratch.
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/crc32.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/ctype.h>
#include <linux/sched.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
#include <linux/slab.h>
#include <linux/kernel.h>

#include <asm/unaligned.h>

#include "usbatm.h"

#define EAGLEUSBVERSION "ueagle 1.4"


/*
 * Debug macros
 */
#define uea_dbg(usb_dev, format, args...)       \
        do { \
                if (debug >= 1) \
                        dev_dbg(&(usb_dev)->dev, \
                                "[ueagle-atm dbg] %s: " format, \
                                        __func__, ##args); \
        } while (0)

#define uea_vdbg(usb_dev, format, args...)      \
        do { \
                if (debug >= 2) \
                        dev_dbg(&(usb_dev)->dev, \
                                "[ueagle-atm vdbg]  " format, ##args); \
        } while (0)

#define uea_enters(usb_dev) \
        uea_vdbg(usb_dev, "entering %s\n" , __func__)

#define uea_leaves(usb_dev) \
        uea_vdbg(usb_dev, "leaving  %s\n" , __func__)

#define uea_err(usb_dev, format, args...) \
        dev_err(&(usb_dev)->dev , "[UEAGLE-ATM] " format , ##args)

#define uea_warn(usb_dev, format, args...) \
        dev_warn(&(usb_dev)->dev , "[Ueagle-atm] " format, ##args)

#define uea_info(usb_dev, format, args...) \
        dev_info(&(usb_dev)->dev , "[ueagle-atm] " format, ##args)

struct intr_pkt;

/* cmv's from firmware */
struct uea_cmvs_v1 {
        u32 address;
        u16 offset;
        u32 data;
} __packed;

struct uea_cmvs_v2 {
        u32 group;
        u32 address;
        u32 offset;
        u32 data;
} __packed;

/* information about currently processed cmv */
struct cmv_dsc_e1 {
        u8 function;
        u16 idx;
        u32 address;
        u16 offset;
};

struct cmv_dsc_e4 {
        u16 function;
        u16 offset;
        u16 address;
        u16 group;
};

union cmv_dsc {
        struct cmv_dsc_e1 e1;
        struct cmv_dsc_e4 e4;
};

struct uea_softc {
        struct usb_device *usb_dev;
        struct usbatm_data *usbatm;

        int modem_index;
        unsigned int driver_info;
        int annex;
#define ANNEXA 0
#define ANNEXB 1

        int booting;
        int reset;

        wait_queue_head_t sync_q;

        struct task_struct *kthread;
        u32 data;
        u32 data1;

        int cmv_ack;
        union cmv_dsc cmv_dsc;

        struct work_struct task;
        u16 pageno;
        u16 ovl;

        const struct firmware *dsp_firm;
        struct urb *urb_int;

        void (*dispatch_cmv)(struct uea_softc *, struct intr_pkt *);
        void (*schedule_load_page)(struct uea_softc *, struct intr_pkt *);
        int (*stat)(struct uea_softc *);
        int (*send_cmvs)(struct uea_softc *);

        /* keep in sync with eaglectl */
        struct uea_stats {
                struct {
                        u32 state;
                        u32 flags;
                        u32 mflags;
                        u32 vidcpe;
                        u32 vidco;
                        u32 dsrate;
                        u32 usrate;
                        u32 dsunc;
                        u32 usunc;
                        u32 dscorr;
                        u32 uscorr;
                        u32 txflow;
                        u32 rxflow;
                        u32 usattenuation;
                        u32 dsattenuation;
                        u32 dsmargin;
                        u32 usmargin;
                        u32 firmid;
                } phy;
        } stats;
};

/*
 * Elsa IDs
 */
#define ELSA_VID                0x05CC
#define ELSA_PID_PSTFIRM        0x3350
#define ELSA_PID_PREFIRM        0x3351

#define ELSA_PID_A_PREFIRM      0x3352
#define ELSA_PID_A_PSTFIRM      0x3353
#define ELSA_PID_B_PREFIRM      0x3362
#define ELSA_PID_B_PSTFIRM      0x3363

/*
 * Devolo IDs : pots if (pid & 0x10)
 */
#define DEVOLO_VID                      0x1039
#define DEVOLO_EAGLE_I_A_PID_PSTFIRM    0x2110
#define DEVOLO_EAGLE_I_A_PID_PREFIRM    0x2111

#define DEVOLO_EAGLE_I_B_PID_PSTFIRM    0x2100
#define DEVOLO_EAGLE_I_B_PID_PREFIRM    0x2101

#define DEVOLO_EAGLE_II_A_PID_PSTFIRM   0x2130
#define DEVOLO_EAGLE_II_A_PID_PREFIRM   0x2131

#define DEVOLO_EAGLE_II_B_PID_PSTFIRM   0x2120
#define DEVOLO_EAGLE_II_B_PID_PREFIRM   0x2121

/*
 * Reference design USB IDs
 */
#define ANALOG_VID              0x1110
#define ADI930_PID_PREFIRM      0x9001
#define ADI930_PID_PSTFIRM      0x9000

#define EAGLE_I_PID_PREFIRM     0x9010  /* Eagle I */
#define EAGLE_I_PID_PSTFIRM     0x900F  /* Eagle I */

#define EAGLE_IIC_PID_PREFIRM   0x9024  /* Eagle IIC */
#define EAGLE_IIC_PID_PSTFIRM   0x9023  /* Eagle IIC */

#define EAGLE_II_PID_PREFIRM    0x9022  /* Eagle II */
#define EAGLE_II_PID_PSTFIRM    0x9021  /* Eagle II */

#define EAGLE_III_PID_PREFIRM   0x9032  /* Eagle III */
#define EAGLE_III_PID_PSTFIRM   0x9031  /* Eagle III */

#define EAGLE_IV_PID_PREFIRM    0x9042  /* Eagle IV */
#define EAGLE_IV_PID_PSTFIRM    0x9041  /* Eagle IV */

/*
 * USR USB IDs
 */
#define USR_VID                 0x0BAF
#define MILLER_A_PID_PREFIRM    0x00F2
#define MILLER_A_PID_PSTFIRM    0x00F1
#define MILLER_B_PID_PREFIRM    0x00FA
#define MILLER_B_PID_PSTFIRM    0x00F9
#define HEINEKEN_A_PID_PREFIRM  0x00F6
#define HEINEKEN_A_PID_PSTFIRM  0x00F5
#define HEINEKEN_B_PID_PREFIRM  0x00F8
#define HEINEKEN_B_PID_PSTFIRM  0x00F7

#define PREFIRM 0
#define PSTFIRM (1<<7)
#define AUTO_ANNEX_A (1<<8)
#define AUTO_ANNEX_B (1<<9)

enum {
        ADI930 = 0,
        EAGLE_I,
        EAGLE_II,
        EAGLE_III,
        EAGLE_IV
};

/* macros for both struct usb_device_id and struct uea_softc */
#define UEA_IS_PREFIRM(x) \
        (!((x)->driver_info & PSTFIRM))
#define UEA_CHIP_VERSION(x) \
        ((x)->driver_info & 0xf)

#define IS_ISDN(x) \
        ((x)->annex & ANNEXB)

#define INS_TO_USBDEV(ins) (ins->usb_dev)

#define GET_STATUS(data) \
        ((data >> 8) & 0xf)

#define IS_OPERATIONAL(sc) \
        ((UEA_CHIP_VERSION(sc) != EAGLE_IV) ? \
        (GET_STATUS(sc->stats.phy.state) == 2) : \
        (sc->stats.phy.state == 7))

/*
 * Set of macros to handle unaligned data in the firmware blob.
 * The FW_GET_BYTE() macro is provided only for consistency.
 */

#define FW_GET_BYTE(p) (*((__u8 *) (p)))

#define FW_DIR "ueagle-atm/"
#define EAGLE_FIRMWARE FW_DIR "eagle.fw"
#define ADI930_FIRMWARE FW_DIR "adi930.fw"
#define EAGLE_I_FIRMWARE FW_DIR "eagleI.fw"
#define EAGLE_II_FIRMWARE FW_DIR "eagleII.fw"
#define EAGLE_III_FIRMWARE FW_DIR "eagleIII.fw"
#define EAGLE_IV_FIRMWARE FW_DIR "eagleIV.fw"

#define DSP4I_FIRMWARE FW_DIR "DSP4i.bin"
#define DSP4P_FIRMWARE FW_DIR "DSP4p.bin"
#define DSP9I_FIRMWARE FW_DIR "DSP9i.bin"
#define DSP9P_FIRMWARE FW_DIR "DSP9p.bin"
#define DSPEI_FIRMWARE FW_DIR "DSPei.bin"
#define DSPEP_FIRMWARE FW_DIR "DSPep.bin"
#define FPGA930_FIRMWARE FW_DIR "930-fpga.bin"

#define CMV4P_FIRMWARE FW_DIR "CMV4p.bin"
#define CMV4PV2_FIRMWARE FW_DIR "CMV4p.bin.v2"
#define CMV4I_FIRMWARE FW_DIR "CMV4i.bin"
#define CMV4IV2_FIRMWARE FW_DIR "CMV4i.bin.v2"
#define CMV9P_FIRMWARE FW_DIR "CMV9p.bin"
#define CMV9PV2_FIRMWARE FW_DIR "CMV9p.bin.v2"
#define CMV9I_FIRMWARE FW_DIR "CMV9i.bin"
#define CMV9IV2_FIRMWARE FW_DIR "CMV9i.bin.v2"
#define CMVEP_FIRMWARE FW_DIR "CMVep.bin"
#define CMVEPV2_FIRMWARE FW_DIR "CMVep.bin.v2"
#define CMVEI_FIRMWARE FW_DIR "CMVei.bin"
#define CMVEIV2_FIRMWARE FW_DIR "CMVei.bin.v2"

#define UEA_FW_NAME_MAX 30
#define NB_MODEM 4

#define BULK_TIMEOUT 300
#define CTRL_TIMEOUT 1000

#define ACK_TIMEOUT msecs_to_jiffies(3000)

#define UEA_INTR_IFACE_NO       0
#define UEA_US_IFACE_NO         1
#define UEA_DS_IFACE_NO         2

#define FASTEST_ISO_INTF        8

#define UEA_BULK_DATA_PIPE      0x02
#define UEA_IDMA_PIPE           0x04
#define UEA_INTR_PIPE           0x04
#define UEA_ISO_DATA_PIPE       0x08

#define UEA_E1_SET_BLOCK        0x0001
#define UEA_E4_SET_BLOCK        0x002c
#define UEA_SET_MODE            0x0003
#define UEA_SET_2183_DATA       0x0004
#define UEA_SET_TIMEOUT         0x0011

#define UEA_LOOPBACK_OFF        0x0002
#define UEA_LOOPBACK_ON         0x0003
#define UEA_BOOT_IDMA           0x0006
#define UEA_START_RESET         0x0007
#define UEA_END_RESET           0x0008

#define UEA_SWAP_MAILBOX        (0x3fcd | 0x4000)
#define UEA_MPTX_START          (0x3fce | 0x4000)
#define UEA_MPTX_MAILBOX        (0x3fd6 | 0x4000)
#define UEA_MPRX_MAILBOX        (0x3fdf | 0x4000)

/* block information in eagle4 dsp firmware  */
struct block_index {
        __le32 PageOffset;
        __le32 NotLastBlock;
        __le32 dummy;
        __le32 PageSize;
        __le32 PageAddress;
        __le16 dummy1;
        __le16 PageNumber;
} __packed;

#define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
#define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)

#define E4_L1_STRING_HEADER 0x10
#define E4_MAX_PAGE_NUMBER 0x58
#define E4_NO_SWAPPAGE_HEADERS 0x31

/* l1_code is eagle4 dsp firmware format */
struct l1_code {
        u8 string_header[E4_L1_STRING_HEADER];
        u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
        struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
        u8 code[0];
} __packed;

/* structures describing a block within a DSP page */
struct block_info_e1 {
        __le16 wHdr;
        __le16 wAddress;
        __le16 wSize;
        __le16 wOvlOffset;
        __le16 wOvl;            /* overlay */
        __le16 wLast;
} __packed;
#define E1_BLOCK_INFO_SIZE 12

struct block_info_e4 {
        __be16 wHdr;
        __u8 bBootPage;
        __u8 bPageNumber;
        __be32 dwSize;
        __be32 dwAddress;
        __be16 wReserved;
} __packed;
#define E4_BLOCK_INFO_SIZE 14

#define UEA_BIHDR 0xabcd
#define UEA_RESERVED 0xffff

/* constants describing cmv type */
#define E1_PREAMBLE 0x535c
#define E1_MODEMTOHOST 0x01
#define E1_HOSTTOMODEM 0x10

#define E1_MEMACCESS 0x1
#define E1_ADSLDIRECTIVE 0x7
#define E1_FUNCTION_TYPE(f) ((f) >> 4)
#define E1_FUNCTION_SUBTYPE(f) ((f) & 0x0f)

#define E4_MEMACCESS 0
#define E4_ADSLDIRECTIVE 0xf
#define E4_FUNCTION_TYPE(f) ((f) >> 8)
#define E4_FUNCTION_SIZE(f) ((f) & 0x0f)
#define E4_FUNCTION_SUBTYPE(f) (((f) >> 4) & 0x0f)

/* for MEMACCESS */
#define E1_REQUESTREAD  0x0
#define E1_REQUESTWRITE 0x1
#define E1_REPLYREAD    0x2
#define E1_REPLYWRITE   0x3

#define E4_REQUESTREAD  0x0
#define E4_REQUESTWRITE 0x4
#define E4_REPLYREAD    (E4_REQUESTREAD | 1)
#define E4_REPLYWRITE   (E4_REQUESTWRITE | 1)

/* for ADSLDIRECTIVE */
#define E1_KERNELREADY 0x0
#define E1_MODEMREADY  0x1

#define E4_KERNELREADY 0x0
#define E4_MODEMREADY  0x1

#define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | \
        ((st) & 0xf) << 4 | ((s) & 0xf))

#define E1_MAKESA(a, b, c, d)                                           \
        (((c) & 0xff) << 24 |                                           \
         ((d) & 0xff) << 16 |                                           \
         ((a) & 0xff) << 8  |                                           \
         ((b) & 0xff))

#define E1_GETSA1(a) ((a >> 8) & 0xff)
#define E1_GETSA2(a) (a & 0xff)
#define E1_GETSA3(a) ((a >> 24) & 0xff)
#define E1_GETSA4(a) ((a >> 16) & 0xff)

#define E1_SA_CNTL E1_MAKESA('C', 'N', 'T', 'L')
#define E1_SA_DIAG E1_MAKESA('D', 'I', 'A', 'G')
#define E1_SA_INFO E1_MAKESA('I', 'N', 'F', 'O')
#define E1_SA_OPTN E1_MAKESA('O', 'P', 'T', 'N')
#define E1_SA_RATE E1_MAKESA('R', 'A', 'T', 'E')
#define E1_SA_STAT E1_MAKESA('S', 'T', 'A', 'T')

#define E4_SA_CNTL 1
#define E4_SA_STAT 2
#define E4_SA_INFO 3
#define E4_SA_TEST 4
#define E4_SA_OPTN 5
#define E4_SA_RATE 6
#define E4_SA_DIAG 7
#define E4_SA_CNFG 8

/* structures representing a CMV (Configuration and Management Variable) */
struct cmv_e1 {
        __le16 wPreamble;
        __u8 bDirection;
        __u8 bFunction;
        __le16 wIndex;
        __le32 dwSymbolicAddress;
        __le16 wOffsetAddress;
        __le32 dwData;
} __packed;

struct cmv_e4 {
        __be16 wGroup;
        __be16 wFunction;
        __be16 wOffset;
        __be16 wAddress;
        __be32 dwData[6];
} __packed;

/* structures representing swap information */
struct swap_info_e1 {
        __u8 bSwapPageNo;
        __u8 bOvl;              /* overlay */
} __packed;

struct swap_info_e4 {
        __u8 bSwapPageNo;
} __packed;

/* structures representing interrupt data */
#define e1_bSwapPageNo  u.e1.s1.swapinfo.bSwapPageNo
#define e1_bOvl         u.e1.s1.swapinfo.bOvl
#define e4_bSwapPageNo  u.e4.s1.swapinfo.bSwapPageNo

#define INT_LOADSWAPPAGE 0x0001
#define INT_INCOMINGCMV  0x0002

union intr_data_e1 {
        struct {
                struct swap_info_e1 swapinfo;
                __le16 wDataSize;
        } __packed s1;
        struct {
                struct cmv_e1 cmv;
                __le16 wDataSize;
        } __packed s2;
} __packed;

union intr_data_e4 {
        struct {
                struct swap_info_e4 swapinfo;
                __le16 wDataSize;
        } __packed s1;
        struct {
                struct cmv_e4 cmv;
                __le16 wDataSize;
        } __packed s2;
} __packed;

struct intr_pkt {
        __u8 bType;
        __u8 bNotification;
        __le16 wValue;
        __le16 wIndex;
        __le16 wLength;
        __le16 wInterrupt;
        union {
                union intr_data_e1 e1;
                union intr_data_e4 e4;
        } u;
} __packed;

#define E1_INTR_PKT_SIZE 28
#define E4_INTR_PKT_SIZE 64

static struct usb_driver uea_driver;
static DEFINE_MUTEX(uea_mutex);
static const char * const chip_name[] = {
        "ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};

static int modem_index;
static unsigned int debug;
static unsigned int altsetting[NB_MODEM] = {
                                [0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
static bool sync_wait[NB_MODEM];
static char *cmv_file[NB_MODEM];
static int annex[NB_MODEM];

module_param(debug, uint, 0644);
MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
module_param_array(altsetting, uint, NULL, 0644);
MODULE_PARM_DESC(altsetting, "alternate setting for incoming traffic: 0=bulk, "
                             "1=isoc slowest, ... , 8=isoc fastest (default)");
module_param_array(sync_wait, bool, NULL, 0644);
MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
module_param_array(cmv_file, charp, NULL, 0644);
MODULE_PARM_DESC(cmv_file,
                "file name with configuration and management variables");
module_param_array(annex, uint, NULL, 0644);
MODULE_PARM_DESC(annex,
                "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");

#define uea_wait(sc, cond, timeo) \
({ \
        int _r = wait_event_interruptible_timeout(sc->sync_q, \
                        (cond) || kthread_should_stop(), timeo); \
        if (kthread_should_stop()) \
                _r = -ENODEV; \
        _r; \
})

#define UPDATE_ATM_STAT(type, val) \
        do { \
                if (sc->usbatm->atm_dev) \
                        sc->usbatm->atm_dev->type = val; \
        } while (0)

#define UPDATE_ATM_SIGNAL(val) \
        do { \
                if (sc->usbatm->atm_dev) \
                        atm_dev_signal_change(sc->usbatm->atm_dev, val); \
        } while (0)


/* Firmware loading */
#define LOAD_INTERNAL     0xA0
#define F8051_USBCS       0x7f92

/**
 * uea_send_modem_cmd - Send a command for pre-firmware devices.
 */
static int uea_send_modem_cmd(struct usb_device *usb,
                              u16 addr, u16 size, const u8 *buff)
{
        int ret = -ENOMEM;
        u8 *xfer_buff;

        xfer_buff = kmemdup(buff, size, GFP_KERNEL);
        if (xfer_buff) {
                ret = usb_control_msg(usb,
                                      usb_sndctrlpipe(usb, 0),
                                      LOAD_INTERNAL,
                                      USB_DIR_OUT | USB_TYPE_VENDOR |
                                      USB_RECIP_DEVICE, addr, 0, xfer_buff,
                                      size, CTRL_TIMEOUT);
                kfree(xfer_buff);
        }

        if (ret < 0)
                return ret;

        return (ret == size) ? 0 : -EIO;
}

static void uea_upload_pre_firmware(const struct firmware *fw_entry,
                                                                void *context)
{
        struct usb_device *usb = context;
        const u8 *pfw;
        u8 value;
        u32 crc = 0;
        int ret, size;

        uea_enters(usb);
        if (!fw_entry) {
                uea_err(usb, "firmware is not available\n");
                goto err;
        }

        pfw = fw_entry->data;
        size = fw_entry->size;
        if (size < 4)
                goto err_fw_corrupted;

        crc = get_unaligned_le32(pfw);
        pfw += 4;
        size -= 4;
        if (crc32_be(0, pfw, size) != crc)
                goto err_fw_corrupted;

        /*
         * Start to upload firmware : send reset
         */
        value = 1;
        ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);

        if (ret < 0) {
                uea_err(usb, "modem reset failed with error %d\n", ret);
                goto err;
        }

        while (size > 3) {
                u8 len = FW_GET_BYTE(pfw);
                u16 add = get_unaligned_le16(pfw + 1);

                size -= len + 3;
                if (size < 0)
                        goto err_fw_corrupted;

                ret = uea_send_modem_cmd(usb, add, len, pfw + 3);
                if (ret < 0) {
                        uea_err(usb, "uploading firmware data failed "
                                        "with error %d\n", ret);
                        goto err;
                }
                pfw += len + 3;
        }

        if (size != 0)
                goto err_fw_corrupted;

        /*
         * Tell the modem we finish : de-assert reset
         */
        value = 0;
        ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value);
        if (ret < 0)
                uea_err(usb, "modem de-assert failed with error %d\n", ret);
        else
                uea_info(usb, "firmware uploaded\n");

        goto err;

err_fw_corrupted:
        uea_err(usb, "firmware is corrupted\n");
err:
        release_firmware(fw_entry);
        uea_leaves(usb);
}

/**
 * uea_load_firmware - Load usb firmware for pre-firmware devices.
 */
static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
{
        int ret;
        char *fw_name = EAGLE_FIRMWARE;

        uea_enters(usb);
        uea_info(usb, "pre-firmware device, uploading firmware\n");

        switch (ver) {
        case ADI930:
                fw_name = ADI930_FIRMWARE;
                break;
        case EAGLE_I:
                fw_name = EAGLE_I_FIRMWARE;
                break;
        case EAGLE_II:
                fw_name = EAGLE_II_FIRMWARE;
                break;
        case EAGLE_III:
                fw_name = EAGLE_III_FIRMWARE;
                break;
        case EAGLE_IV:
                fw_name = EAGLE_IV_FIRMWARE;
                break;
        }

        ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev,
                                        GFP_KERNEL, usb,
                                        uea_upload_pre_firmware);
        if (ret)
                uea_err(usb, "firmware %s is not available\n", fw_name);
        else
                uea_info(usb, "loading firmware %s\n", fw_name);

        uea_leaves(usb);
        return ret;
}

/* modem management : dsp firmware, send/read CMV, monitoring statistic
 */

/*
 * Make sure that the DSP code provided is safe to use.
 */
static int check_dsp_e1(const u8 *dsp, unsigned int len)
{
        u8 pagecount, blockcount;
        u16 blocksize;
        u32 pageoffset;
        unsigned int i, j, p, pp;

        pagecount = FW_GET_BYTE(dsp);
        p = 1;

        /* enough space for page offsets? */
        if (p + 4 * pagecount > len)
                return 1;

        for (i = 0; i < pagecount; i++) {

                pageoffset = get_unaligned_le32(dsp + p);
                p += 4;

                if (pageoffset == 0)
                        continue;

                /* enough space for blockcount? */
                if (pageoffset >= len)
                        return 1;

                pp = pageoffset;
                blockcount = FW_GET_BYTE(dsp + pp);
                pp += 1;

                for (j = 0; j < blockcount; j++) {

                        /* enough space for block header? */
                        if (pp + 4 > len)
                                return 1;

                        pp += 2;        /* skip blockaddr */
                        blocksize = get_unaligned_le16(dsp + pp);
                        pp += 2;

                        /* enough space for block data? */
                        if (pp + blocksize > len)
                                return 1;

                        pp += blocksize;
                }
        }

        return 0;
}

static int check_dsp_e4(const u8 *dsp, int len)
{
        int i;
        struct l1_code *p = (struct l1_code *) dsp;
        unsigned int sum = p->code - dsp;

        if (len < sum)
                return 1;

        if (strcmp("STRATIPHY ANEXA", p->string_header) != 0 &&
            strcmp("STRATIPHY ANEXB", p->string_header) != 0)
                return 1;

        for (i = 0; i < E4_MAX_PAGE_NUMBER; i++) {
                struct block_index *blockidx;
                u8 blockno = p->page_number_to_block_index[i];
                if (blockno >= E4_NO_SWAPPAGE_HEADERS)
                        continue;

                do {
                        u64 l;

                        if (blockno >= E4_NO_SWAPPAGE_HEADERS)
                                return 1;

                        blockidx = &p->page_header[blockno++];
                        if ((u8 *)(blockidx + 1) - dsp  >= len)
                                return 1;

                        if (le16_to_cpu(blockidx->PageNumber) != i)
                                return 1;

                        l = E4_PAGE_BYTES(blockidx->PageSize);
                        sum += l;
                        l += le32_to_cpu(blockidx->PageOffset);
                        if (l > len)
                                return 1;

                /* zero is zero regardless endianes */
                } while (blockidx->NotLastBlock);
        }

        return (sum == len) ? 0 : 1;
}

/*
 * send data to the idma pipe
 * */
static int uea_idma_write(struct uea_softc *sc, const void *data, u32 size)
{
        int ret = -ENOMEM;
        u8 *xfer_buff;
        int bytes_read;

        xfer_buff = kmemdup(data, size, GFP_KERNEL);
        if (!xfer_buff) {
                uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
                return ret;
        }

        ret = usb_bulk_msg(sc->usb_dev,
                         usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
                         xfer_buff, size, &bytes_read, BULK_TIMEOUT);

        kfree(xfer_buff);
        if (ret < 0)
                return ret;
        if (size != bytes_read) {
                uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size,
                       bytes_read);
                return -EIO;
        }

        return 0;
}

static int request_dsp(struct uea_softc *sc)
{
        int ret;
        char *dsp_name;

        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
                if (IS_ISDN(sc))
                        dsp_name = DSP4I_FIRMWARE;
                else
                        dsp_name = DSP4P_FIRMWARE;
        } else if (UEA_CHIP_VERSION(sc) == ADI930) {
                if (IS_ISDN(sc))
                        dsp_name = DSP9I_FIRMWARE;
                else
                        dsp_name = DSP9P_FIRMWARE;
        } else {
                if (IS_ISDN(sc))
                        dsp_name = DSPEI_FIRMWARE;
                else
                        dsp_name = DSPEP_FIRMWARE;
        }

        ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev);
        if (ret < 0) {
                uea_err(INS_TO_USBDEV(sc),
                       "requesting firmware %s failed with error %d\n",
                        dsp_name, ret);
                return ret;
        }

        if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
                ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size);
        else
                ret = check_dsp_e1(sc->dsp_firm->data, sc->dsp_firm->size);

        if (ret) {
                uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
                       dsp_name);
                release_firmware(sc->dsp_firm);
                sc->dsp_firm = NULL;
                return -EILSEQ;
        }

        return 0;
}

/*
 * The uea_load_page() function must be called within a process context
 */
static void uea_load_page_e1(struct work_struct *work)
{
        struct uea_softc *sc = container_of(work, struct uea_softc, task);
        u16 pageno = sc->pageno;
        u16 ovl = sc->ovl;
        struct block_info_e1 bi;

        const u8 *p;
        u8 pagecount, blockcount;
        u16 blockaddr, blocksize;
        u32 pageoffset;
        int i;

        /* reload firmware when reboot start and it's loaded already */
        if (ovl == 0 && pageno == 0) {
                release_firmware(sc->dsp_firm);
                sc->dsp_firm = NULL;
        }

        if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
                return;

        p = sc->dsp_firm->data;
        pagecount = FW_GET_BYTE(p);
        p += 1;

        if (pageno >= pagecount)
                goto bad1;

        p += 4 * pageno;
        pageoffset = get_unaligned_le32(p);

        if (pageoffset == 0)
                goto bad1;

        p = sc->dsp_firm->data + pageoffset;
        blockcount = FW_GET_BYTE(p);
        p += 1;

        uea_dbg(INS_TO_USBDEV(sc),
               "sending %u blocks for DSP page %u\n", blockcount, pageno);

        bi.wHdr = cpu_to_le16(UEA_BIHDR);
        bi.wOvl = cpu_to_le16(ovl);
        bi.wOvlOffset = cpu_to_le16(ovl | 0x8000);

        for (i = 0; i < blockcount; i++) {
                blockaddr = get_unaligned_le16(p);
                p += 2;

                blocksize = get_unaligned_le16(p);
                p += 2;

                bi.wSize = cpu_to_le16(blocksize);
                bi.wAddress = cpu_to_le16(blockaddr);
                bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);

                /* send block info through the IDMA pipe */
                if (uea_idma_write(sc, &bi, E1_BLOCK_INFO_SIZE))
                        goto bad2;

                /* send block data through the IDMA pipe */
                if (uea_idma_write(sc, p, blocksize))
                        goto bad2;

                p += blocksize;
        }

        return;

bad2:
        uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
        return;
bad1:
        uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
}

static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
{
        struct block_info_e4 bi;
        struct block_index *blockidx;
        struct l1_code *p = (struct l1_code *) sc->dsp_firm->data;
        u8 blockno = p->page_number_to_block_index[pageno];

        bi.wHdr = cpu_to_be16(UEA_BIHDR);
        bi.bBootPage = boot;
        bi.bPageNumber = pageno;
        bi.wReserved = cpu_to_be16(UEA_RESERVED);

        do {
                const u8 *blockoffset;
                unsigned int blocksize;

                blockidx = &p->page_header[blockno];
                blocksize = E4_PAGE_BYTES(blockidx->PageSize);
                blockoffset = sc->dsp_firm->data + le32_to_cpu(
                                                        blockidx->PageOffset);

                bi.dwSize = cpu_to_be32(blocksize);
                bi.dwAddress = cpu_to_be32(le32_to_cpu(blockidx->PageAddress));

                uea_dbg(INS_TO_USBDEV(sc),
                        "sending block %u for DSP page "
                        "%u size %u address %x\n",
                        blockno, pageno, blocksize,
                        le32_to_cpu(blockidx->PageAddress));

                /* send block info through the IDMA pipe */
                if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
                        goto bad;

                /* send block data through the IDMA pipe */
                if (uea_idma_write(sc, blockoffset, blocksize))
                        goto bad;

                blockno++;
        } while (blockidx->NotLastBlock);

        return;

bad:
        uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", blockno);
        return;
}

static void uea_load_page_e4(struct work_struct *work)
{
        struct uea_softc *sc = container_of(work, struct uea_softc, task);
        u8 pageno = sc->pageno;
        int i;
        struct block_info_e4 bi;
        struct l1_code *p;

        uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);

        /* reload firmware when reboot start and it's loaded already */
        if (pageno == 0) {
                release_firmware(sc->dsp_firm);
                sc->dsp_firm = NULL;
        }

        if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
                return;

        p = (struct l1_code *) sc->dsp_firm->data;
        if (pageno >= le16_to_cpu(p->page_header[0].PageNumber)) {
                uea_err(INS_TO_USBDEV(sc), "invalid DSP "
                                                "page %u requested\n", pageno);
                return;
        }

        if (pageno != 0) {
                __uea_load_page_e4(sc, pageno, 0);
                return;
        }

        uea_dbg(INS_TO_USBDEV(sc),
               "sending Main DSP page %u\n", p->page_header[0].PageNumber);

        for (i = 0; i < le16_to_cpu(p->page_header[0].PageNumber); i++) {
                if (E4_IS_BOOT_PAGE(p->page_header[i].PageSize))
                        __uea_load_page_e4(sc, i, 1);
        }

        uea_dbg(INS_TO_USBDEV(sc) , "sending start bi\n");

        bi.wHdr = cpu_to_be16(UEA_BIHDR);
        bi.bBootPage = 0;
        bi.bPageNumber = 0xff;
        bi.wReserved = cpu_to_be16(UEA_RESERVED);
        bi.dwSize = cpu_to_be32(E4_PAGE_BYTES(p->page_header[0].PageSize));
        bi.dwAddress = cpu_to_be32(le32_to_cpu(p->page_header[0].PageAddress));

        /* send block info through the IDMA pipe */
        if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
                uea_err(INS_TO_USBDEV(sc), "sending DSP start bi failed\n");
}

static inline void wake_up_cmv_ack(struct uea_softc *sc)
{
        BUG_ON(sc->cmv_ack);
        sc->cmv_ack = 1;
        wake_up(&sc->sync_q);
}

static inline int wait_cmv_ack(struct uea_softc *sc)
{
        int ret = uea_wait(sc, sc->cmv_ack , ACK_TIMEOUT);

        sc->cmv_ack = 0;

        uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
                        jiffies_to_msecs(ret));

        if (ret < 0)
                return ret;

        return (ret == 0) ? -ETIMEDOUT : 0;
}

#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00

static int uea_request(struct uea_softc *sc,
                u16 value, u16 index, u16 size, const void *data)
{
        u8 *xfer_buff;
        int ret = -ENOMEM;

        xfer_buff = kmemdup(data, size, GFP_KERNEL);
        if (!xfer_buff) {
                uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
                return ret;
        }

        ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
                              UCDC_SEND_ENCAPSULATED_COMMAND,
                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
                              value, index, xfer_buff, size, CTRL_TIMEOUT);

        kfree(xfer_buff);
        if (ret < 0) {
                uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret);
                return ret;
        }

        if (ret != size) {
                uea_err(INS_TO_USBDEV(sc),
                       "usb_control_msg send only %d bytes (instead of %d)\n",
                       ret, size);
                return -EIO;
        }

        return 0;
}

static int uea_cmv_e1(struct uea_softc *sc,
                u8 function, u32 address, u16 offset, u32 data)
{
        struct cmv_e1 cmv;
        int ret;

        uea_enters(INS_TO_USBDEV(sc));
        uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
                        "offset : 0x%04x, data : 0x%08x\n",
                        E1_FUNCTION_TYPE(function),
                        E1_FUNCTION_SUBTYPE(function),
                        E1_GETSA1(address), E1_GETSA2(address),
                        E1_GETSA3(address),
                        E1_GETSA4(address), offset, data);

        /* we send a request, but we expect a reply */
        sc->cmv_dsc.e1.function = function | 0x2;
        sc->cmv_dsc.e1.idx++;
        sc->cmv_dsc.e1.address = address;
        sc->cmv_dsc.e1.offset = offset;

        cmv.wPreamble = cpu_to_le16(E1_PREAMBLE);
        cmv.bDirection = E1_HOSTTOMODEM;
        cmv.bFunction = function;
        cmv.wIndex = cpu_to_le16(sc->cmv_dsc.e1.idx);
        put_unaligned_le32(address, &cmv.dwSymbolicAddress);
        cmv.wOffsetAddress = cpu_to_le16(offset);
        put_unaligned_le32(data >> 16 | data << 16, &cmv.dwData);

        ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START,
                                                        sizeof(cmv), &cmv);
        if (ret < 0)
                return ret;
        ret = wait_cmv_ack(sc);
        uea_leaves(INS_TO_USBDEV(sc));
        return ret;
}

static int uea_cmv_e4(struct uea_softc *sc,
                u16 function, u16 group, u16 address, u16 offset, u32 data)
{
        struct cmv_e4 cmv;
        int ret;

        uea_enters(INS_TO_USBDEV(sc));
        memset(&cmv, 0, sizeof(cmv));

        uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Group : 0x%04x, "
                 "Address : 0x%04x, offset : 0x%04x, data : 0x%08x\n",
                 E4_FUNCTION_TYPE(function), E4_FUNCTION_SUBTYPE(function),
                 group, address, offset, data);

        /* we send a request, but we expect a reply */
        sc->cmv_dsc.e4.function = function | (0x1 << 4);
        sc->cmv_dsc.e4.offset = offset;
        sc->cmv_dsc.e4.address = address;
        sc->cmv_dsc.e4.group = group;

        cmv.wFunction = cpu_to_be16(function);
        cmv.wGroup = cpu_to_be16(group);
        cmv.wAddress = cpu_to_be16(address);
        cmv.wOffset = cpu_to_be16(offset);
        cmv.dwData[0] = cpu_to_be32(data);

        ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START,
                                                        sizeof(cmv), &cmv);
        if (ret < 0)
                return ret;
        ret = wait_cmv_ack(sc);
        uea_leaves(INS_TO_USBDEV(sc));
        return ret;
}

static inline int uea_read_cmv_e1(struct uea_softc *sc,
                u32 address, u16 offset, u32 *data)
{
        int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTREAD),
                          address, offset, 0);
        if (ret < 0)
                uea_err(INS_TO_USBDEV(sc),
                        "reading cmv failed with error %d\n", ret);
        else
                *data = sc->data;

        return ret;
}

static inline int uea_read_cmv_e4(struct uea_softc *sc,
                u8 size, u16 group, u16 address, u16 offset, u32 *data)
{
        int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
                                                        E4_REQUESTREAD, size),
                          group, address, offset, 0);
        if (ret < 0)
                uea_err(INS_TO_USBDEV(sc),
                        "reading cmv failed with error %d\n", ret);
        else {
                *data = sc->data;
                /* size is in 16-bit word quantities */
                if (size > 2)
                        *(data + 1) = sc->data1;
        }
        return ret;
}

static inline int uea_write_cmv_e1(struct uea_softc *sc,
                u32 address, u16 offset, u32 data)
{
        int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTWRITE),
                          address, offset, data);
        if (ret < 0)
                uea_err(INS_TO_USBDEV(sc),
                        "writing cmv failed with error %d\n", ret);

        return ret;
}

static inline int uea_write_cmv_e4(struct uea_softc *sc,
                u8 size, u16 group, u16 address, u16 offset, u32 data)
{
        int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
                                                        E4_REQUESTWRITE, size),
                          group, address, offset, data);
        if (ret < 0)
                uea_err(INS_TO_USBDEV(sc),
                        "writing cmv failed with error %d\n", ret);

        return ret;
}

static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
{
        int ret;
        u16 timeout;

        /* in bulk mode the modem have problem with high rate
         * changing internal timing could improve things, but the
         * value is mysterious.
         * ADI930 don't support it (-EPIPE error).
         */

        if (UEA_CHIP_VERSION(sc) == ADI930 ||
            altsetting[sc->modem_index] > 0 ||
            sc->stats.phy.dsrate == dsrate)
                return;

        /* Original timming (1Mbit/s) from ADI (used in windows driver) */
        timeout = (dsrate <= 1024*1024) ? 0 : 1;
        ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
        uea_info(INS_TO_USBDEV(sc), "setting new timeout %d%s\n",
                 timeout,  ret < 0 ? " failed" : "");

}

/*
 * Monitor the modem and update the stat
 * return 0 if everything is ok
 * return < 0 if an error occurs (-EAGAIN reboot needed)
 */
static int uea_stat_e1(struct uea_softc *sc)
{
        u32 data;
        int ret;

        uea_enters(INS_TO_USBDEV(sc));
        data = sc->stats.phy.state;

        ret = uea_read_cmv_e1(sc, E1_SA_STAT, 0, &sc->stats.phy.state);
        if (ret < 0)
                return ret;

        switch (GET_STATUS(sc->stats.phy.state)) {
        case 0:         /* not yet synchronized */
                uea_dbg(INS_TO_USBDEV(sc),
                       "modem not yet synchronized\n");
                return 0;

        case 1:         /* initialization */
                uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
                return 0;

        case 2:         /* operational */
                uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n");
                break;

        case 3:         /* fail ... */
                uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
                                        " (may be try other cmv/dsp)\n");
                return -EAGAIN;

        case 4 ... 6:   /* test state */
                uea_warn(INS_TO_USBDEV(sc),
                                "modem in test mode - not supported\n");
                return -EAGAIN;

        case 7:         /* fast-retain ... */
                uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n");
                return 0;
        default:
                uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n",
                        GET_STATUS(sc->stats.phy.state));
                return -EAGAIN;
        }

        if (GET_STATUS(data) != 2) {
                uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
                uea_info(INS_TO_USBDEV(sc), "modem operational\n");

                /* release the dsp firmware as it is not needed until
                 * the next failure
                 */
                release_firmware(sc->dsp_firm);
                sc->dsp_firm = NULL;
        }

        /* always update it as atm layer could not be init when we switch to
         * operational state
         */
        UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);

        /* wake up processes waiting for synchronization */
        wake_up(&sc->sync_q);

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 2, &sc->stats.phy.flags);
        if (ret < 0)
                return ret;
        sc->stats.phy.mflags |= sc->stats.phy.flags;

        /* in case of a flags ( for example delineation LOSS (& 0x10)),
         * we check the status again in order to detect the failure earlier
         */
        if (sc->stats.phy.flags) {
                uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
                       sc->stats.phy.flags);
                return 0;
        }

        ret = uea_read_cmv_e1(sc, E1_SA_RATE, 0, &data);
        if (ret < 0)
                return ret;

        uea_set_bulk_timeout(sc, (data >> 16) * 32);
        sc->stats.phy.dsrate = (data >> 16) * 32;
        sc->stats.phy.usrate = (data & 0xffff) * 32;
        UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 23, &data);
        if (ret < 0)
                return ret;
        sc->stats.phy.dsattenuation = (data & 0xff) / 2;

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 47, &data);
        if (ret < 0)
                return ret;
        sc->stats.phy.usattenuation = (data & 0xff) / 2;

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 25, &sc->stats.phy.dsmargin);
        if (ret < 0)
                return ret;

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 49, &sc->stats.phy.usmargin);
        if (ret < 0)
                return ret;

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 51, &sc->stats.phy.rxflow);
        if (ret < 0)
                return ret;

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 52, &sc->stats.phy.txflow);
        if (ret < 0)
                return ret;

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 54, &sc->stats.phy.dsunc);
        if (ret < 0)
                return ret;

        /* only for atu-c */
        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 58, &sc->stats.phy.usunc);
        if (ret < 0)
                return ret;

        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 53, &sc->stats.phy.dscorr);
        if (ret < 0)
                return ret;

        /* only for atu-c */
        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 57, &sc->stats.phy.uscorr);
        if (ret < 0)
                return ret;

        ret = uea_read_cmv_e1(sc, E1_SA_INFO, 8, &sc->stats.phy.vidco);
        if (ret < 0)
                return ret;

        ret = uea_read_cmv_e1(sc, E1_SA_INFO, 13, &sc->stats.phy.vidcpe);
        if (ret < 0)
                return ret;

        return 0;
}

static int uea_stat_e4(struct uea_softc *sc)
{
        u32 data;
        u32 tmp_arr[2];
        int ret;

        uea_enters(INS_TO_USBDEV(sc));
        data = sc->stats.phy.state;

        /* XXX only need to be done before operationnal... */
        ret = uea_read_cmv_e4(sc, 1, E4_SA_STAT, 0, 0, &sc->stats.phy.state);
        if (ret < 0)
                return ret;

        switch (sc->stats.phy.state) {
        case 0x0:       /* not yet synchronized */
        case 0x1:
        case 0x3:
        case 0x4:
                uea_dbg(INS_TO_USBDEV(sc), "modem not yet "
                                                "synchronized\n");
                return 0;
        case 0x5:       /* initialization */
        case 0x6:
        case 0x9:
        case 0xa:
                uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
                return 0;
        case 0x2:       /* fail ... */
                uea_info(INS_TO_USBDEV(sc), "modem synchronization "
                                "failed (may be try other cmv/dsp)\n");
                return -EAGAIN;
        case 0x7:       /* operational */
                break;
        default:
                uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n",
                                                sc->stats.phy.state);
                return 0;
        }

        if (data != 7) {
                uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
                uea_info(INS_TO_USBDEV(sc), "modem operational\n");

                /* release the dsp firmware as it is not needed until
                 * the next failure
                 */
                release_firmware(sc->dsp_firm);
                sc->dsp_firm = NULL;
        }

        /* always update it as atm layer could not be init when we switch to
         * operational state
         */
        UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);

        /* wake up processes waiting for synchronization */
        wake_up(&sc->sync_q);

        /* TODO improve this state machine :
         * we need some CMV info : what they do and their unit
         * we should find the equivalent of eagle3- CMV
         */
        /* check flags */
        ret = uea_read_cmv_e4(sc, 1, E4_SA_DIAG, 0, 0, &sc->stats.phy.flags);
        if (ret < 0)
                return ret;
        sc->stats.phy.mflags |= sc->stats.phy.flags;

        /* in case of a flags ( for example delineation LOSS (& 0x10)),
         * we check the status again in order to detect the failure earlier
         */
        if (sc->stats.phy.flags) {
                uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
                       sc->stats.phy.flags);
                if (sc->stats.phy.flags & 1) /* delineation LOSS */
                        return -EAGAIN;
                if (sc->stats.phy.flags & 0x4000) /* Reset Flag */
                        return -EAGAIN;
                return 0;
        }

        /* rate data may be in upper or lower half of 64 bit word, strange */
        ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 0, 0, tmp_arr);
        if (ret < 0)
                return ret;
        data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
        sc->stats.phy.usrate = data / 1000;

        ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 1, 0, tmp_arr);
        if (ret < 0)
                return ret;
        data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
        uea_set_bulk_timeout(sc, data / 1000);
        sc->stats.phy.dsrate = data / 1000;
        UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);

        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 1, &data);
        if (ret < 0)
                return ret;
        sc->stats.phy.dsattenuation = data / 10;

        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 1, &data);
        if (ret < 0)
                return ret;
        sc->stats.phy.usattenuation = data / 10;

        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 3, &data);
        if (ret < 0)
                return ret;
        sc->stats.phy.dsmargin = data / 2;

        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 3, &data);
        if (ret < 0)
                return ret;
        sc->stats.phy.usmargin = data / 10;

        return 0;
}

static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver)
{
        char file_arr[] = "CMVxy.bin";
        char *file;

        kernel_param_lock(THIS_MODULE);
        /* set proper name corresponding modem version and line type */
        if (cmv_file[sc->modem_index] == NULL) {
                if (UEA_CHIP_VERSION(sc) == ADI930)
                        file_arr[3] = '9';
                else if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
                        file_arr[3] = '4';
                else
                        file_arr[3] = 'e';

                file_arr[4] = IS_ISDN(sc) ? 'i' : 'p';
                file = file_arr;
        } else
                file = cmv_file[sc->modem_index];

        strcpy(cmv_name, FW_DIR);
        strlcat(cmv_name, file, UEA_FW_NAME_MAX);
        if (ver == 2)
                strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX);
        kernel_param_unlock(THIS_MODULE);
}

static int request_cmvs_old(struct uea_softc *sc,
                 void **cmvs, const struct firmware **fw)
{
        int ret, size;
        u8 *data;
        char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */

        cmvs_file_name(sc, cmv_name, 1);
        ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
        if (ret < 0) {
                uea_err(INS_TO_USBDEV(sc),
                       "requesting firmware %s failed with error %d\n",
                       cmv_name, ret);
                return ret;
        }

        data = (u8 *) (*fw)->data;
        size = (*fw)->size;
        if (size < 1)
                goto err_fw_corrupted;

        if (size != *data * sizeof(struct uea_cmvs_v1) + 1)
                goto err_fw_corrupted;

        *cmvs = (void *)(data + 1);
        return *data;

err_fw_corrupted:
        uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
        release_firmware(*fw);
        return -EILSEQ;
}

static int request_cmvs(struct uea_softc *sc,
                 void **cmvs, const struct firmware **fw, int *ver)
{
        int ret, size;
        u32 crc;
        u8 *data;
        char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */

        cmvs_file_name(sc, cmv_name, 2);
        ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
        if (ret < 0) {
                /* if caller can handle old version, try to provide it */
                if (*ver == 1) {
                        uea_warn(INS_TO_USBDEV(sc), "requesting "
                                                        "firmware %s failed, "
                                "try to get older cmvs\n", cmv_name);
                        return request_cmvs_old(sc, cmvs, fw);
                }
                uea_err(INS_TO_USBDEV(sc),
                       "requesting firmware %s failed with error %d\n",
                       cmv_name, ret);
                return ret;
        }

        size = (*fw)->size;
        data = (u8 *) (*fw)->data;
        if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
                if (*ver == 1) {
                        uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted,"
                                " try to get older cmvs\n", cmv_name);
                        release_firmware(*fw);
                        return request_cmvs_old(sc, cmvs, fw);
                }
                goto err_fw_corrupted;
        }

        *ver = 2;

        data += 4;
        size -= 4;
        if (size < 5)
                goto err_fw_corrupted;

        crc = get_unaligned_le32(data);
        data += 4;
        size -= 4;
        if (crc32_be(0, data, size) != crc)
                goto err_fw_corrupted;

        if (size != *data * sizeof(struct uea_cmvs_v2) + 1)
                goto err_fw_corrupted;

        *cmvs = (void *) (data + 1);
        return *data;

err_fw_corrupted:
        uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
        release_firmware(*fw);
        return -EILSEQ;
}

static int uea_send_cmvs_e1(struct uea_softc *sc)
{
        int i, ret, len;
        void *cmvs_ptr;
        const struct firmware *cmvs_fw;
        int ver = 1; /* we can handle v1 cmv firmware version; */

        /* Enter in R-IDLE (cmv) until instructed otherwise */
        ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
        if (ret < 0)
                return ret;

        /* Dump firmware version */
        ret = uea_read_cmv_e1(sc, E1_SA_INFO, 10, &sc->stats.phy.firmid);
        if (ret < 0)
                return ret;
        uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
                        sc->stats.phy.firmid);

        /* get options */
        ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
        if (ret < 0)
                return ret;

        /* send options */
        if (ver == 1) {
                struct uea_cmvs_v1 *cmvs_v1 = cmvs_ptr;

                uea_warn(INS_TO_USBDEV(sc), "use deprecated cmvs version, "
                        "please update your firmware\n");

                for (i = 0; i < len; i++) {
                        ret = uea_write_cmv_e1(sc,
                                get_unaligned_le32(&cmvs_v1[i].address),
                                get_unaligned_le16(&cmvs_v1[i].offset),
                                get_unaligned_le32(&cmvs_v1[i].data));
                        if (ret < 0)
                                goto out;
                }
        } else if (ver == 2) {
                struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;

                for (i = 0; i < len; i++) {
                        ret = uea_write_cmv_e1(sc,
                                get_unaligned_le32(&cmvs_v2[i].address),
                                (u16) get_unaligned_le32(&cmvs_v2[i].offset),
                                get_unaligned_le32(&cmvs_v2[i].data));
                        if (ret < 0)
                                goto out;
                }
        } else {
                /* This really should not happen */
                uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
                goto out;
        }

        /* Enter in R-ACT-REQ */
        ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
        uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
        uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
                                                "synchronization...\n");
out:
        release_firmware(cmvs_fw);
        return ret;
}

static int uea_send_cmvs_e4(struct uea_softc *sc)
{
        int i, ret, len;
        void *cmvs_ptr;
        const struct firmware *cmvs_fw;
        int ver = 2; /* we can only handle v2 cmv firmware version; */

        /* Enter in R-IDLE (cmv) until instructed otherwise */
        ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
        if (ret < 0)
                return ret;

        /* Dump firmware version */
        /* XXX don't read the 3th byte as it is always 6 */
        ret = uea_read_cmv_e4(sc, 2, E4_SA_INFO, 55, 0, &sc->stats.phy.firmid);
        if (ret < 0)
                return ret;
        uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
                        sc->stats.phy.firmid);


        /* get options */
        ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
        if (ret < 0)
                return ret;

        /* send options */
        if (ver == 2) {
                struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;

                for (i = 0; i < len; i++) {
                        ret = uea_write_cmv_e4(sc, 1,
                                get_unaligned_le32(&cmvs_v2[i].group),
                                get_unaligned_le32(&cmvs_v2[i].address),
                                get_unaligned_le32(&cmvs_v2[i].offset),
                                get_unaligned_le32(&cmvs_v2[i].data));
                        if (ret < 0)
                                goto out;
                }
        } else {
                /* This really should not happen */
                uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
                goto out;
        }

        /* Enter in R-ACT-REQ */
        ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
        uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
        uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
                                                "synchronization...\n");
out:
        release_firmware(cmvs_fw);
        return ret;
}

/* Start boot post firmware modem:
 * - send reset commands through usb control pipe
 * - start workqueue for DSP loading
 * - send CMV options to modem
 */

static int uea_start_reset(struct uea_softc *sc)
{
        u16 zero = 0;   /* ;-) */
        int ret;

        uea_enters(INS_TO_USBDEV(sc));
        uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");

        /* mask interrupt */
        sc->booting = 1;
        /* We need to set this here because, a ack timeout could have occurred,
         * but before we start the reboot, the ack occurs and set this to 1.
         * So we will failed to wait Ready CMV.
         */
        sc->cmv_ack = 0;
        UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);

        /* reset statistics */
        memset(&sc->stats, 0, sizeof(struct uea_stats));

        /* tell the modem that we want to boot in IDMA mode */
        uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
        uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);

        /* enter reset mode */
        uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);

        /* original driver use 200ms, but windows driver use 100ms */
        ret = uea_wait(sc, 0, msecs_to_jiffies(100));
        if (ret < 0)
                return ret;

        /* leave reset mode */
        uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);

        if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
                /* clear tx and rx mailboxes */
                uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
                uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
                uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
        }

        ret = uea_wait(sc, 0, msecs_to_jiffies(1000));
        if (ret < 0)
                return ret;

        if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
                sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
                                                        E4_MODEMREADY, 1);
        else
                sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
                                                        E1_MODEMREADY);

        /* demask interrupt */
        sc->booting = 0;

        /* start loading DSP */
        sc->pageno = 0;
        sc->ovl = 0;
        schedule_work(&sc->task);

        /* wait for modem ready CMV */
        ret = wait_cmv_ack(sc);
        if (ret < 0)
                return ret;

        uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");

        ret = sc->send_cmvs(sc);
        if (ret < 0)
                return ret;

        sc->reset = 0;
        uea_leaves(INS_TO_USBDEV(sc));
        return ret;
}

/*
 * In case of an error wait 1s before rebooting the modem
 * if the modem don't request reboot (-EAGAIN).
 * Monitor the modem every 1s.
 */

static int uea_kthread(void *data)
{
        struct uea_softc *sc = data;
        int ret = -EAGAIN;

        set_freezable();
        uea_enters(INS_TO_USBDEV(sc));
        while (!kthread_should_stop()) {
                if (ret < 0 || sc->reset)
                        ret = uea_start_reset(sc);
                if (!ret)
                        ret = sc->stat(sc);
                if (ret != -EAGAIN)
                        uea_wait(sc, 0, msecs_to_jiffies(1000));
                try_to_freeze();
        }
        uea_leaves(INS_TO_USBDEV(sc));
        return ret;
}

/* Load second usb firmware for ADI930 chip */
static int load_XILINX_firmware(struct uea_softc *sc)
{
        const struct firmware *fw_entry;
        int ret, size, u, ln;
        const u8 *pfw;
        u8 value;
        char *fw_name = FPGA930_FIRMWARE;

        uea_enters(INS_TO_USBDEV(sc));

        ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev);
        if (ret) {
                uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n",
                       fw_name);
                goto err0;
        }

        pfw = fw_entry->data;
        size = fw_entry->size;
        if (size != 0x577B) {
                uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
                       fw_name);
                ret = -EILSEQ;
                goto err1;
        }
        for (u = 0; u < size; u += ln) {
                ln = min(size - u, 64);
                ret = uea_request(sc, 0xe, 0, ln, pfw + u);
                if (ret < 0) {
                        uea_err(INS_TO_USBDEV(sc),
                               "elsa download data failed (%d)\n", ret);
                        goto err1;
                }
        }

        /* finish to send the fpga */
        ret = uea_request(sc, 0xe, 1, 0, NULL);
        if (ret < 0) {
                uea_err(INS_TO_USBDEV(sc),
                                "elsa download data failed (%d)\n", ret);
                goto err1;
        }

        /* Tell the modem we finish : de-assert reset */
        value = 0;
        ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
        if (ret < 0)
                uea_err(sc->usb_dev, "elsa de-assert failed with error"
                                                                " %d\n", ret);

err1:
        release_firmware(fw_entry);

err0:
        uea_leaves(INS_TO_USBDEV(sc));
        return ret;
}

/* The modem send us an ack. First with check if it right */
static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
{
        struct cmv_dsc_e1 *dsc = &sc->cmv_dsc.e1;
        struct cmv_e1 *cmv = &intr->u.e1.s2.cmv;

        uea_enters(INS_TO_USBDEV(sc));
        if (le16_to_cpu(cmv->wPreamble) != E1_PREAMBLE)
                goto bad1;

        if (cmv->bDirection != E1_MODEMTOHOST)
                goto bad1;

        /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
         * the first MEMACCESS cmv. Ignore it...
         */
        if (cmv->bFunction != dsc->function) {
                if (UEA_CHIP_VERSION(sc) == ADI930
                                && cmv->bFunction ==  E1_MAKEFUNCTION(2, 2)) {
                        cmv->wIndex = cpu_to_le16(dsc->idx);
                        put_unaligned_le32(dsc->address,
                                                &cmv->dwSymbolicAddress);
                        cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
                } else
                        goto bad2;
        }

        if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
                                                        E1_MODEMREADY)) {
                wake_up_cmv_ack(sc);
                uea_leaves(INS_TO_USBDEV(sc));
                return;
        }

        /* in case of MEMACCESS */
        if (le16_to_cpu(cmv->wIndex) != dsc->idx ||
            get_unaligned_le32(&cmv->dwSymbolicAddress) != dsc->address ||
            le16_to_cpu(cmv->wOffsetAddress) != dsc->offset)
                goto bad2;

        sc->data = get_unaligned_le32(&cmv->dwData);
        sc->data = sc->data << 16 | sc->data >> 16;

        wake_up_cmv_ack(sc);
        uea_leaves(INS_TO_USBDEV(sc));
        return;

bad2:
        uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
                        "Function : %d, Subfunction : %d\n",
                        E1_FUNCTION_TYPE(cmv->bFunction),
                        E1_FUNCTION_SUBTYPE(cmv->bFunction));
        uea_leaves(INS_TO_USBDEV(sc));
        return;

bad1:
        uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
                        "wPreamble %d, bDirection %d\n",
                        le16_to_cpu(cmv->wPreamble), cmv->bDirection);
        uea_leaves(INS_TO_USBDEV(sc));
}

/* The modem send us an ack. First with check if it right */
static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr)
{
        struct cmv_dsc_e4 *dsc = &sc->cmv_dsc.e4;
        struct cmv_e4 *cmv = &intr->u.e4.s2.cmv;

        uea_enters(INS_TO_USBDEV(sc));
        uea_dbg(INS_TO_USBDEV(sc), "cmv %x %x %x %x %x %x\n",
                be16_to_cpu(cmv->wGroup), be16_to_cpu(cmv->wFunction),
                be16_to_cpu(cmv->wOffset), be16_to_cpu(cmv->wAddress),
                be32_to_cpu(cmv->dwData[0]), be32_to_cpu(cmv->dwData[1]));

        if (be16_to_cpu(cmv->wFunction) != dsc->function)
                goto bad2;

        if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
                                                E4_MODEMREADY, 1)) {
                wake_up_cmv_ack(sc);
                uea_leaves(INS_TO_USBDEV(sc));
                return;
        }

        /* in case of MEMACCESS */
        if (be16_to_cpu(cmv->wOffset) != dsc->offset ||
            be16_to_cpu(cmv->wGroup) != dsc->group ||
            be16_to_cpu(cmv->wAddress) != dsc->address)
                goto bad2;

        sc->data = be32_to_cpu(cmv->dwData[0]);
        sc->data1 = be32_to_cpu(cmv->dwData[1]);
        wake_up_cmv_ack(sc);
        uea_leaves(INS_TO_USBDEV(sc));
        return;

bad2:
        uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
                        "Function : %d, Subfunction : %d\n",
                        E4_FUNCTION_TYPE(cmv->wFunction),
                        E4_FUNCTION_SUBTYPE(cmv->wFunction));
        uea_leaves(INS_TO_USBDEV(sc));
        return;
}

static void uea_schedule_load_page_e1(struct uea_softc *sc,
                                                struct intr_pkt *intr)
{
        sc->pageno = intr->e1_bSwapPageNo;
        sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
        schedule_work(&sc->task);
}

static void uea_schedule_load_page_e4(struct uea_softc *sc,
                                                struct intr_pkt *intr)
{
        sc->pageno = intr->e4_bSwapPageNo;
        schedule_work(&sc->task);
}

/*
 * interrupt handler
 */
static void uea_intr(struct urb *urb)
{
        struct uea_softc *sc = urb->context;
        struct intr_pkt *intr = urb->transfer_buffer;
        int status = urb->status;

        uea_enters(INS_TO_USBDEV(sc));

        if (unlikely(status < 0)) {
                uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
                       status);
                return;
        }

        /* device-to-host interrupt */
        if (intr->bType != 0x08 || sc->booting) {
                uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n");
                goto resubmit;
        }

        switch (le16_to_cpu(intr->wInterrupt)) {
        case INT_LOADSWAPPAGE:
                sc->schedule_load_page(sc, intr);
                break;

        case INT_INCOMINGCMV:
                sc->dispatch_cmv(sc, intr);
                break;

        default:
                uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n",
                       le16_to_cpu(intr->wInterrupt));
        }

resubmit:
        usb_submit_urb(sc->urb_int, GFP_ATOMIC);
}

/*
 * Start the modem : init the data and start kernel thread
 */
static int uea_boot(struct uea_softc *sc)
{
        int ret, size;
        struct intr_pkt *intr;

        uea_enters(INS_TO_USBDEV(sc));

        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
                size = E4_INTR_PKT_SIZE;
                sc->dispatch_cmv = uea_dispatch_cmv_e4;
                sc->schedule_load_page = uea_schedule_load_page_e4;
                sc->stat = uea_stat_e4;
                sc->send_cmvs = uea_send_cmvs_e4;
                INIT_WORK(&sc->task, uea_load_page_e4);
        } else {
                size = E1_INTR_PKT_SIZE;
                sc->dispatch_cmv = uea_dispatch_cmv_e1;
                sc->schedule_load_page = uea_schedule_load_page_e1;
                sc->stat = uea_stat_e1;
                sc->send_cmvs = uea_send_cmvs_e1;
                INIT_WORK(&sc->task, uea_load_page_e1);
        }

        init_waitqueue_head(&sc->sync_q);

        if (UEA_CHIP_VERSION(sc) == ADI930)
                load_XILINX_firmware(sc);

        intr = kmalloc(size, GFP_KERNEL);
        if (!intr)
                goto err0;

        sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
        if (!sc->urb_int)
                goto err1;

        usb_fill_int_urb(sc->urb_int, sc->usb_dev,
                         usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
                         intr, size, uea_intr, sc,
                         sc->usb_dev->actconfig->interface[0]->altsetting[0].
                         endpoint[0].desc.bInterval);

        ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
        if (ret < 0) {
                uea_err(INS_TO_USBDEV(sc),
                       "urb submition failed with error %d\n", ret);
                goto err1;
        }

        /* Create worker thread, but don't start it here.  Start it after
         * all usbatm generic initialization is done.
         */
        sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
        if (IS_ERR(sc->kthread)) {
                uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
                goto err2;
        }

        uea_leaves(INS_TO_USBDEV(sc));
        return 0;

err2:
        usb_kill_urb(sc->urb_int);
err1:
        usb_free_urb(sc->urb_int);
        sc->urb_int = NULL;
        kfree(intr);
err0:
        uea_leaves(INS_TO_USBDEV(sc));
        return -ENOMEM;
}

/*
 * Stop the modem : kill kernel thread and free data
 */
static void uea_stop(struct uea_softc *sc)
{
        int ret;
        uea_enters(INS_TO_USBDEV(sc));
        ret = kthread_stop(sc->kthread);
        uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);

        uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);

        usb_kill_urb(sc->urb_int);
        kfree(sc->urb_int->transfer_buffer);
        usb_free_urb(sc->urb_int);

        /* flush the work item, when no one can schedule it */
        flush_work(&sc->task);

        release_firmware(sc->dsp_firm);
        uea_leaves(INS_TO_USBDEV(sc));
}

/* syfs interface */
static struct uea_softc *dev_to_uea(struct device *dev)
{
        struct usb_interface *intf;
        struct usbatm_data *usbatm;

        intf = to_usb_interface(dev);
        if (!intf)
                return NULL;

        usbatm = usb_get_intfdata(intf);
        if (!usbatm)
                return NULL;

        return usbatm->driver_data;
}

static ssize_t read_status(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        int ret = -ENODEV;
        struct uea_softc *sc;

        mutex_lock(&uea_mutex);
        sc = dev_to_uea(dev);
        if (!sc)
                goto out;
        ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
out:
        mutex_unlock(&uea_mutex);
        return ret;
}

static ssize_t reboot(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        int ret = -ENODEV;
        struct uea_softc *sc;

        mutex_lock(&uea_mutex);
        sc = dev_to_uea(dev);
        if (!sc)
                goto out;
        sc->reset = 1;
        ret = count;
out:
        mutex_unlock(&uea_mutex);
        return ret;
}

static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);

static ssize_t read_human_status(struct device *dev,
                        struct device_attribute *attr, char *buf)
{
        int ret = -ENODEV;
        int modem_state;
        struct uea_softc *sc;

        mutex_lock(&uea_mutex);
        sc = dev_to_uea(dev);
        if (!sc)
                goto out;

        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
                switch (sc->stats.phy.state) {
                case 0x0:       /* not yet synchronized */
                case 0x1:
                case 0x3:
                case 0x4:
                        modem_state = 0;
                        break;
                case 0x5:       /* initialization */
                case 0x6:
                case 0x9:
                case 0xa:
                        modem_state = 1;
                        break;
                case 0x7:       /* operational */
                        modem_state = 2;
                        break;
                case 0x2:       /* fail ... */
                        modem_state = 3;
                        break;
                default:        /* unknown */
                        modem_state = 4;
                        break;
                }
        } else
                modem_state = GET_STATUS(sc->stats.phy.state);

        switch (modem_state) {
        case 0:
                ret = sprintf(buf, "Modem is booting\n");
                break;
        case 1:
                ret = sprintf(buf, "Modem is initializing\n");
                break;
        case 2:
                ret = sprintf(buf, "Modem is operational\n");
                break;
        case 3:
                ret = sprintf(buf, "Modem synchronization failed\n");
                break;
        default:
                ret = sprintf(buf, "Modem state is unknown\n");
                break;
        }
out:
        mutex_unlock(&uea_mutex);
        return ret;
}

static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);

static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        int ret = -ENODEV;
        struct uea_softc *sc;
        char *delin = "GOOD";

        mutex_lock(&uea_mutex);
        sc = dev_to_uea(dev);
        if (!sc)
                goto out;

        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
                if (sc->stats.phy.flags & 0x4000)
                        delin = "RESET";
                else if (sc->stats.phy.flags & 0x0001)
                        delin = "LOSS";
        } else {
                if (sc->stats.phy.flags & 0x0C00)
                        delin = "ERROR";
                else if (sc->stats.phy.flags & 0x0030)
                        delin = "LOSS";
        }

        ret = sprintf(buf, "%s\n", delin);
out:
        mutex_unlock(&uea_mutex);
        return ret;
}

static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);

#define UEA_ATTR(name, reset)                                   \
                                                                \
static ssize_t read_##name(struct device *dev,                  \
                struct device_attribute *attr, char *buf)       \
{                                                               \
        int ret = -ENODEV;                                      \
        struct uea_softc *sc;                                   \
                                                                \
        mutex_lock(&uea_mutex);                                 \
        sc = dev_to_uea(dev);                                   \
        if (!sc)                                                \
                goto out;                                       \
        ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name);  \
        if (reset)                                              \
                sc->stats.phy.name = 0;                         \
out:                                                            \
        mutex_unlock(&uea_mutex);                               \
        return ret;                                             \
}                                                               \
                                                                \
static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL)

UEA_ATTR(mflags, 1);
UEA_ATTR(vidcpe, 0);
UEA_ATTR(usrate, 0);
UEA_ATTR(dsrate, 0);
UEA_ATTR(usattenuation, 0);
UEA_ATTR(dsattenuation, 0);
UEA_ATTR(usmargin, 0);
UEA_ATTR(dsmargin, 0);
UEA_ATTR(txflow, 0);
UEA_ATTR(rxflow, 0);
UEA_ATTR(uscorr, 0);
UEA_ATTR(dscorr, 0);
UEA_ATTR(usunc, 0);
UEA_ATTR(dsunc, 0);
UEA_ATTR(firmid, 0);

/* Retrieve the device End System Identifier (MAC) */

static int uea_getesi(struct uea_softc *sc, u_char *esi)
{
        unsigned char mac_str[2 * ETH_ALEN + 1];
        int i;
        if (usb_string
            (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str,
             sizeof(mac_str)) != 2 * ETH_ALEN)
                return 1;

        for (i = 0; i < ETH_ALEN; i++)
                esi[i] = hex_to_bin(mac_str[2 * i]) * 16 +
                         hex_to_bin(mac_str[2 * i + 1]);

        return 0;
}

/* ATM stuff */
static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
{
        struct uea_softc *sc = usbatm->driver_data;

        return uea_getesi(sc, atm_dev->esi);
}

static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf)
{
        struct uea_softc *sc = usbatm->driver_data;

        wait_event_interruptible(sc->sync_q, IS_OPERATIONAL(sc));

        return 0;

}

static int claim_interface(struct usb_device *usb_dev,
                           struct usbatm_data *usbatm, int ifnum)
{
        int ret;
        struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum);

        if (!intf) {
                uea_err(usb_dev, "interface %d not found\n", ifnum);
                return -ENODEV;
        }

        ret = usb_driver_claim_interface(&uea_driver, intf, usbatm);
        if (ret != 0)
                uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum,
                       ret);
        return ret;
}

static struct attribute *attrs[] = {
        &dev_attr_stat_status.attr,
        &dev_attr_stat_mflags.attr,
        &dev_attr_stat_human_status.attr,
        &dev_attr_stat_delin.attr,
        &dev_attr_stat_vidcpe.attr,
        &dev_attr_stat_usrate.attr,
        &dev_attr_stat_dsrate.attr,
        &dev_attr_stat_usattenuation.attr,
        &dev_attr_stat_dsattenuation.attr,
        &dev_attr_stat_usmargin.attr,
        &dev_attr_stat_dsmargin.attr,
        &dev_attr_stat_txflow.attr,
        &dev_attr_stat_rxflow.attr,
        &dev_attr_stat_uscorr.attr,
        &dev_attr_stat_dscorr.attr,
        &dev_attr_stat_usunc.attr,
        &dev_attr_stat_dsunc.attr,
        &dev_attr_stat_firmid.attr,
        NULL,
};
static struct attribute_group attr_grp = {
        .attrs = attrs,
};

static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
                   const struct usb_device_id *id)
{
        struct usb_device *usb = interface_to_usbdev(intf);
        struct uea_softc *sc;
        int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
        unsigned int alt;

        uea_enters(usb);

        /* interface 0 is for firmware/monitoring */
        if (ifnum != UEA_INTR_IFACE_NO)
                return -ENODEV;

        usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT);

        /* interface 1 is for outbound traffic */
        ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
        if (ret < 0)
                return ret;

        /* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */
        if (UEA_CHIP_VERSION(id) != ADI930) {
                /* interface 2 is for inbound traffic */
                ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
                if (ret < 0)
                        return ret;
        }

        sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
        if (!sc)
                return -ENOMEM;

        sc->usb_dev = usb;
        usbatm->driver_data = sc;
        sc->usbatm = usbatm;
        sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
        sc->driver_info = id->driver_info;

        /* first try to use module parameter */
        if (annex[sc->modem_index] == 1)
                sc->annex = ANNEXA;
        else if (annex[sc->modem_index] == 2)
                sc->annex = ANNEXB;
        /* try to autodetect annex */
        else if (sc->driver_info & AUTO_ANNEX_A)
                sc->annex = ANNEXA;
        else if (sc->driver_info & AUTO_ANNEX_B)
                sc->annex = ANNEXB;
        else
                sc->annex = (le16_to_cpu
                (sc->usb_dev->descriptor.bcdDevice) & 0x80) ? ANNEXB : ANNEXA;

        alt = altsetting[sc->modem_index];
        /* ADI930 don't support iso */
        if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
                if (alt <= 8 &&
                        usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
                        uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
                        uea_info(usb, "using iso mode\n");
                        usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
                } else {
                        uea_err(usb, "setting alternate %u failed for "
                                        "2 interface, using bulk mode\n", alt);
                }
        }

        ret = sysfs_create_group(&intf->dev.kobj, &attr_grp);
        if (ret < 0)
                goto error;

        ret = uea_boot(sc);
        if (ret < 0)
                goto error_rm_grp;

        return 0;

error_rm_grp:
        sysfs_remove_group(&intf->dev.kobj, &attr_grp);
error:
        kfree(sc);
        return ret;
}

static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
{
        struct uea_softc *sc = usbatm->driver_data;

        sysfs_remove_group(&intf->dev.kobj, &attr_grp);
        uea_stop(sc);
        kfree(sc);
}

static struct usbatm_driver uea_usbatm_driver = {
        .driver_name = "ueagle-atm",
        .bind = uea_bind,
        .atm_start = uea_atm_open,
        .unbind = uea_unbind,
        .heavy_init = uea_heavy,
        .bulk_in = UEA_BULK_DATA_PIPE,
        .bulk_out = UEA_BULK_DATA_PIPE,
        .isoc_in = UEA_ISO_DATA_PIPE,
};

static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
        struct usb_device *usb = interface_to_usbdev(intf);
        int ret;

        uea_enters(usb);
        uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
                le16_to_cpu(usb->descriptor.idVendor),
                le16_to_cpu(usb->descriptor.idProduct),
                le16_to_cpu(usb->descriptor.bcdDevice),
                chip_name[UEA_CHIP_VERSION(id)]);

        usb_reset_device(usb);

        if (UEA_IS_PREFIRM(id))
                return uea_load_firmware(usb, UEA_CHIP_VERSION(id));

        ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver);
        if (ret == 0) {
                struct usbatm_data *usbatm = usb_get_intfdata(intf);
                struct uea_softc *sc = usbatm->driver_data;

                /* Ensure carrier is initialized to off as early as possible */
                UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);

                /* Only start the worker thread when all init is done */
                wake_up_process(sc->kthread);
        }

        return ret;
}

static void uea_disconnect(struct usb_interface *intf)
{
        struct usb_device *usb = interface_to_usbdev(intf);
        int ifnum = intf->altsetting->desc.bInterfaceNumber;
        uea_enters(usb);

        /* ADI930 has 2 interfaces and eagle 3 interfaces.
         * Pre-firmware device has one interface
         */
        if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
                mutex_lock(&uea_mutex);
                usbatm_usb_disconnect(intf);
                mutex_unlock(&uea_mutex);
                uea_info(usb, "ADSL device removed\n");
        }

        uea_leaves(usb);
}

/*
 * List of supported VID/PID
 */
static const struct usb_device_id uea_ids[] = {
        {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM),
                .driver_info = ADI930 | PREFIRM},
        {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM),
                .driver_info = ADI930 | PSTFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM),
                .driver_info = EAGLE_I | PREFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM),
                .driver_info = EAGLE_I | PSTFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM),
                .driver_info = EAGLE_II | PREFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM),
                .driver_info = EAGLE_II | PSTFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM),
                .driver_info = EAGLE_II | PREFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM),
                .driver_info = EAGLE_II | PSTFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM),
                .driver_info = EAGLE_III | PREFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM),
                .driver_info = EAGLE_III | PSTFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM),
                .driver_info = EAGLE_IV | PREFIRM},
        {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM),
                .driver_info = EAGLE_IV | PSTFIRM},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM),
                .driver_info = EAGLE_I | PREFIRM},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM),
                .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM),
                .driver_info = EAGLE_I | PREFIRM},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM),
                .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM),
                .driver_info = EAGLE_II | PREFIRM},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM),
                .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM),
                .driver_info = EAGLE_II | PREFIRM},
        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM),
                .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
        {USB_DEVICE(ELSA_VID,   ELSA_PID_PREFIRM),
                .driver_info = ADI930 | PREFIRM},
        {USB_DEVICE(ELSA_VID,   ELSA_PID_PSTFIRM),
                .driver_info = ADI930 | PSTFIRM},
        {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PREFIRM),
                .driver_info = ADI930 | PREFIRM},
        {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PSTFIRM),
                .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
        {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PREFIRM),
                .driver_info = ADI930 | PREFIRM},
        {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PSTFIRM),
                .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
        {USB_DEVICE(USR_VID,    MILLER_A_PID_PREFIRM),
                .driver_info = EAGLE_I | PREFIRM},
        {USB_DEVICE(USR_VID,    MILLER_A_PID_PSTFIRM),
                .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_A},
        {USB_DEVICE(USR_VID,    MILLER_B_PID_PREFIRM),
                .driver_info = EAGLE_I | PREFIRM},
        {USB_DEVICE(USR_VID,    MILLER_B_PID_PSTFIRM),
                .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_B},
        {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PREFIRM),
                .driver_info = EAGLE_I | PREFIRM},
        {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PSTFIRM),
                .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
        {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PREFIRM),
                .driver_info = EAGLE_I | PREFIRM},
        {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PSTFIRM),
                .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
        {}
};

/*
 * USB driver descriptor
 */
static struct usb_driver uea_driver = {
        .name = "ueagle-atm",
        .id_table = uea_ids,
        .probe = uea_probe,
        .disconnect = uea_disconnect,
};

MODULE_DEVICE_TABLE(usb, uea_ids);

module_usb_driver(uea_driver);

MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka");
MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_FIRMWARE(EAGLE_FIRMWARE);
MODULE_FIRMWARE(ADI930_FIRMWARE);
MODULE_FIRMWARE(EAGLE_I_FIRMWARE);
MODULE_FIRMWARE(EAGLE_II_FIRMWARE);
MODULE_FIRMWARE(EAGLE_III_FIRMWARE);
MODULE_FIRMWARE(EAGLE_IV_FIRMWARE);
MODULE_FIRMWARE(DSP4I_FIRMWARE);
MODULE_FIRMWARE(DSP4P_FIRMWARE);
MODULE_FIRMWARE(DSP9I_FIRMWARE);
MODULE_FIRMWARE(DSP9P_FIRMWARE);
MODULE_FIRMWARE(DSPEI_FIRMWARE);
MODULE_FIRMWARE(DSPEP_FIRMWARE);
MODULE_FIRMWARE(FPGA930_FIRMWARE);
MODULE_FIRMWARE(CMV4P_FIRMWARE);
MODULE_FIRMWARE(CMV4PV2_FIRMWARE);
MODULE_FIRMWARE(CMV4I_FIRMWARE);
MODULE_FIRMWARE(CMV4IV2_FIRMWARE);
MODULE_FIRMWARE(CMV9P_FIRMWARE);
MODULE_FIRMWARE(CMV9PV2_FIRMWARE);
MODULE_FIRMWARE(CMV9I_FIRMWARE);
MODULE_FIRMWARE(CMV9IV2_FIRMWARE);
MODULE_FIRMWARE(CMVEP_FIRMWARE);
MODULE_FIRMWARE(CMVEPV2_FIRMWARE);
MODULE_FIRMWARE(CMVEI_FIRMWARE);
MODULE_FIRMWARE(CMVEIV2_FIRMWARE);