1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17#include <linux/kernel.h>
18#include <linux/errno.h>
19#include <linux/slab.h>
20#include <linux/tty.h>
21#include <linux/tty_driver.h>
22#include <linux/tty_flip.h>
23#include <linux/module.h>
24#include <linux/spinlock.h>
25#include <linux/usb.h>
26#include <linux/usb/serial.h>
27
28#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
29
30#define SPCP825_QUIRK_NO_UART_STATUS 0x01
31#define SPCP825_QUIRK_NO_WORK_MODE 0x02
32
33#define SPCP8x5_007_VID 0x04FC
34#define SPCP8x5_007_PID 0x0201
35#define SPCP8x5_008_VID 0x04fc
36#define SPCP8x5_008_PID 0x0235
37#define SPCP8x5_PHILIPS_VID 0x0471
38#define SPCP8x5_PHILIPS_PID 0x081e
39#define SPCP8x5_INTERMATIC_VID 0x04FC
40#define SPCP8x5_INTERMATIC_PID 0x0204
41#define SPCP8x5_835_VID 0x04fc
42#define SPCP8x5_835_PID 0x0231
43
44static const struct usb_device_id id_table[] = {
45 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
46 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
47 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
48 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
49 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
50 .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
51 SPCP825_QUIRK_NO_WORK_MODE },
52 { }
53};
54MODULE_DEVICE_TABLE(usb, id_table);
55
56struct spcp8x5_usb_ctrl_arg {
57 u8 type;
58 u8 cmd;
59 u8 cmd_type;
60 u16 value;
61 u16 index;
62 u16 length;
63};
64
65
66
67#define MCR_CONTROL_LINE_RTS 0x02
68#define MCR_CONTROL_LINE_DTR 0x01
69#define MCR_DTR 0x01
70#define MCR_RTS 0x02
71
72#define MSR_STATUS_LINE_DCD 0x80
73#define MSR_STATUS_LINE_RI 0x40
74#define MSR_STATUS_LINE_DSR 0x20
75#define MSR_STATUS_LINE_CTS 0x10
76
77
78#define SET_DEFAULT 0x40
79#define SET_DEFAULT_TYPE 0x20
80
81#define SET_UART_FORMAT 0x40
82#define SET_UART_FORMAT_TYPE 0x21
83#define SET_UART_FORMAT_SIZE_5 0x00
84#define SET_UART_FORMAT_SIZE_6 0x01
85#define SET_UART_FORMAT_SIZE_7 0x02
86#define SET_UART_FORMAT_SIZE_8 0x03
87#define SET_UART_FORMAT_STOP_1 0x00
88#define SET_UART_FORMAT_STOP_2 0x04
89#define SET_UART_FORMAT_PAR_NONE 0x00
90#define SET_UART_FORMAT_PAR_ODD 0x10
91#define SET_UART_FORMAT_PAR_EVEN 0x30
92#define SET_UART_FORMAT_PAR_MASK 0xD0
93#define SET_UART_FORMAT_PAR_SPACE 0x90
94
95#define GET_UART_STATUS_TYPE 0xc0
96#define GET_UART_STATUS 0x22
97#define GET_UART_STATUS_MSR 0x06
98
99#define SET_UART_STATUS 0x40
100#define SET_UART_STATUS_TYPE 0x23
101#define SET_UART_STATUS_MCR 0x0004
102#define SET_UART_STATUS_MCR_DTR 0x01
103#define SET_UART_STATUS_MCR_RTS 0x02
104#define SET_UART_STATUS_MCR_LOOP 0x10
105
106#define SET_WORKING_MODE 0x40
107#define SET_WORKING_MODE_TYPE 0x24
108#define SET_WORKING_MODE_U2C 0x00
109#define SET_WORKING_MODE_RS485 0x01
110#define SET_WORKING_MODE_PDMA 0x02
111#define SET_WORKING_MODE_SPP 0x03
112
113#define SET_FLOWCTL_CHAR 0x40
114#define SET_FLOWCTL_CHAR_TYPE 0x25
115
116#define GET_VERSION 0xc0
117#define GET_VERSION_TYPE 0x26
118
119#define SET_REGISTER 0x40
120#define SET_REGISTER_TYPE 0x27
121
122#define GET_REGISTER 0xc0
123#define GET_REGISTER_TYPE 0x28
124
125#define SET_RAM 0x40
126#define SET_RAM_TYPE 0x31
127
128#define GET_RAM 0xc0
129#define GET_RAM_TYPE 0x32
130
131
132#define UART_STATE 0x08
133#define UART_STATE_TRANSIENT_MASK 0x75
134#define UART_DCD 0x01
135#define UART_DSR 0x02
136#define UART_BREAK_ERROR 0x04
137#define UART_RING 0x08
138#define UART_FRAME_ERROR 0x10
139#define UART_PARITY_ERROR 0x20
140#define UART_OVERRUN_ERROR 0x40
141#define UART_CTS 0x80
142
143struct spcp8x5_private {
144 unsigned quirks;
145 spinlock_t lock;
146 u8 line_control;
147};
148
149static int spcp8x5_probe(struct usb_serial *serial,
150 const struct usb_device_id *id)
151{
152 usb_set_serial_data(serial, (void *)id);
153
154 return 0;
155}
156
157static int spcp8x5_port_probe(struct usb_serial_port *port)
158{
159 const struct usb_device_id *id = usb_get_serial_data(port->serial);
160 struct spcp8x5_private *priv;
161
162 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
163 if (!priv)
164 return -ENOMEM;
165
166 spin_lock_init(&priv->lock);
167 priv->quirks = id->driver_info;
168
169 usb_set_serial_port_data(port, priv);
170
171 port->port.drain_delay = 256;
172
173 return 0;
174}
175
176static int spcp8x5_port_remove(struct usb_serial_port *port)
177{
178 struct spcp8x5_private *priv;
179
180 priv = usb_get_serial_port_data(port);
181 kfree(priv);
182
183 return 0;
184}
185
186static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
187{
188 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
189 struct usb_device *dev = port->serial->dev;
190 int retval;
191
192 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
193 return -EPERM;
194
195 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
196 SET_UART_STATUS_TYPE, SET_UART_STATUS,
197 mcr, 0x04, NULL, 0, 100);
198 if (retval != 0) {
199 dev_err(&port->dev, "failed to set control lines: %d\n",
200 retval);
201 }
202 return retval;
203}
204
205static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
206{
207 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
208 struct usb_device *dev = port->serial->dev;
209 u8 *buf;
210 int ret;
211
212 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
213 return -EPERM;
214
215 buf = kzalloc(1, GFP_KERNEL);
216 if (!buf)
217 return -ENOMEM;
218
219 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
220 GET_UART_STATUS, GET_UART_STATUS_TYPE,
221 0, GET_UART_STATUS_MSR, buf, 1, 100);
222 if (ret < 1) {
223 dev_err(&port->dev, "failed to get modem status: %d\n", ret);
224 if (ret >= 0)
225 ret = -EIO;
226 goto out;
227 }
228
229 dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf);
230 *status = *buf;
231 ret = 0;
232out:
233 kfree(buf);
234
235 return ret;
236}
237
238static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
239 u16 index)
240{
241 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
242 struct usb_device *dev = port->serial->dev;
243 int ret;
244
245 if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
246 return;
247
248 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
249 SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
250 value, index, NULL, 0, 100);
251 dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
252 if (ret < 0)
253 dev_err(&port->dev, "failed to set work mode: %d\n", ret);
254}
255
256static int spcp8x5_carrier_raised(struct usb_serial_port *port)
257{
258 u8 msr;
259 int ret;
260
261 ret = spcp8x5_get_msr(port, &msr);
262 if (ret || msr & MSR_STATUS_LINE_DCD)
263 return 1;
264
265 return 0;
266}
267
268static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
269{
270 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
271 unsigned long flags;
272 u8 control;
273
274 spin_lock_irqsave(&priv->lock, flags);
275 if (on)
276 priv->line_control = MCR_CONTROL_LINE_DTR
277 | MCR_CONTROL_LINE_RTS;
278 else
279 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
280 | MCR_CONTROL_LINE_RTS);
281 control = priv->line_control;
282 spin_unlock_irqrestore(&priv->lock, flags);
283 spcp8x5_set_ctrl_line(port, control);
284}
285
286static void spcp8x5_init_termios(struct tty_struct *tty)
287{
288 tty->termios = tty_std_termios;
289 tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
290 tty->termios.c_ispeed = 115200;
291 tty->termios.c_ospeed = 115200;
292}
293
294static void spcp8x5_set_termios(struct tty_struct *tty,
295 struct usb_serial_port *port, struct ktermios *old_termios)
296{
297 struct usb_serial *serial = port->serial;
298 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
299 unsigned long flags;
300 unsigned int cflag = tty->termios.c_cflag;
301 unsigned short uartdata;
302 unsigned char buf[2] = {0, 0};
303 int baud;
304 int i;
305 u8 control;
306
307
308 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
309 return;
310
311
312 spin_lock_irqsave(&priv->lock, flags);
313 control = priv->line_control;
314 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
315 priv->line_control |= MCR_DTR;
316 if (!(old_termios->c_cflag & CRTSCTS))
317 priv->line_control |= MCR_RTS;
318 }
319 if (control != priv->line_control) {
320 control = priv->line_control;
321 spin_unlock_irqrestore(&priv->lock, flags);
322 spcp8x5_set_ctrl_line(port, control);
323 } else {
324 spin_unlock_irqrestore(&priv->lock, flags);
325 }
326
327
328 baud = tty_get_baud_rate(tty);
329 switch (baud) {
330 case 300: buf[0] = 0x00; break;
331 case 600: buf[0] = 0x01; break;
332 case 1200: buf[0] = 0x02; break;
333 case 2400: buf[0] = 0x03; break;
334 case 4800: buf[0] = 0x04; break;
335 case 9600: buf[0] = 0x05; break;
336 case 19200: buf[0] = 0x07; break;
337 case 38400: buf[0] = 0x09; break;
338 case 57600: buf[0] = 0x0a; break;
339 case 115200: buf[0] = 0x0b; break;
340 case 230400: buf[0] = 0x0c; break;
341 case 460800: buf[0] = 0x0d; break;
342 case 921600: buf[0] = 0x0e; break;
343
344
345 case 3000000: buf[0] = 0x11; break;
346
347 case 0:
348 case 1000000:
349 buf[0] = 0x0b; break;
350 default:
351 dev_err(&port->dev, "unsupported baudrate, using 9600\n");
352 }
353
354
355 switch (cflag & CSIZE) {
356 case CS5:
357 buf[1] |= SET_UART_FORMAT_SIZE_5;
358 break;
359 case CS6:
360 buf[1] |= SET_UART_FORMAT_SIZE_6;
361 break;
362 case CS7:
363 buf[1] |= SET_UART_FORMAT_SIZE_7;
364 break;
365 default:
366 case CS8:
367 buf[1] |= SET_UART_FORMAT_SIZE_8;
368 break;
369 }
370
371
372 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
373 SET_UART_FORMAT_STOP_1;
374
375
376 if (cflag & PARENB) {
377 buf[1] |= (cflag & PARODD) ?
378 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
379 } else {
380 buf[1] |= SET_UART_FORMAT_PAR_NONE;
381 }
382 uartdata = buf[0] | buf[1]<<8;
383
384 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
385 SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
386 uartdata, 0, NULL, 0, 100);
387 if (i < 0)
388 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
389 uartdata, i);
390 dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i);
391
392 if (cflag & CRTSCTS) {
393
394 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
395 }
396}
397
398static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
399{
400 struct usb_serial *serial = port->serial;
401 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
402 int ret;
403
404 usb_clear_halt(serial->dev, port->write_urb->pipe);
405 usb_clear_halt(serial->dev, port->read_urb->pipe);
406
407 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
408 0x09, 0x00,
409 0x01, 0x00, NULL, 0x00, 100);
410 if (ret)
411 return ret;
412
413 spcp8x5_set_ctrl_line(port, priv->line_control);
414
415 if (tty)
416 spcp8x5_set_termios(tty, port, NULL);
417
418 return usb_serial_generic_open(tty, port);
419}
420
421static int spcp8x5_tiocmset(struct tty_struct *tty,
422 unsigned int set, unsigned int clear)
423{
424 struct usb_serial_port *port = tty->driver_data;
425 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
426 unsigned long flags;
427 u8 control;
428
429 spin_lock_irqsave(&priv->lock, flags);
430 if (set & TIOCM_RTS)
431 priv->line_control |= MCR_RTS;
432 if (set & TIOCM_DTR)
433 priv->line_control |= MCR_DTR;
434 if (clear & TIOCM_RTS)
435 priv->line_control &= ~MCR_RTS;
436 if (clear & TIOCM_DTR)
437 priv->line_control &= ~MCR_DTR;
438 control = priv->line_control;
439 spin_unlock_irqrestore(&priv->lock, flags);
440
441 return spcp8x5_set_ctrl_line(port, control);
442}
443
444static int spcp8x5_tiocmget(struct tty_struct *tty)
445{
446 struct usb_serial_port *port = tty->driver_data;
447 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
448 unsigned long flags;
449 unsigned int mcr;
450 u8 status;
451 unsigned int result;
452
453 result = spcp8x5_get_msr(port, &status);
454 if (result)
455 return result;
456
457 spin_lock_irqsave(&priv->lock, flags);
458 mcr = priv->line_control;
459 spin_unlock_irqrestore(&priv->lock, flags);
460
461 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
462 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
463 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0)
464 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0)
465 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0)
466 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0);
467
468 return result;
469}
470
471static struct usb_serial_driver spcp8x5_device = {
472 .driver = {
473 .owner = THIS_MODULE,
474 .name = "SPCP8x5",
475 },
476 .id_table = id_table,
477 .num_ports = 1,
478 .num_bulk_in = 1,
479 .num_bulk_out = 1,
480 .open = spcp8x5_open,
481 .dtr_rts = spcp8x5_dtr_rts,
482 .carrier_raised = spcp8x5_carrier_raised,
483 .set_termios = spcp8x5_set_termios,
484 .init_termios = spcp8x5_init_termios,
485 .tiocmget = spcp8x5_tiocmget,
486 .tiocmset = spcp8x5_tiocmset,
487 .probe = spcp8x5_probe,
488 .port_probe = spcp8x5_port_probe,
489 .port_remove = spcp8x5_port_remove,
490};
491
492static struct usb_serial_driver * const serial_drivers[] = {
493 &spcp8x5_device, NULL
494};
495
496module_usb_serial_driver(serial_drivers, id_table);
497
498MODULE_DESCRIPTION(DRIVER_DESC);
499MODULE_LICENSE("GPL");
500