linux/drivers/usb/usbip/stub_rx.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2003-2008 Takahiro Hirofuchi
   3 *
   4 * This is free software; you can redistribute it and/or modify
   5 * it under the terms of the GNU General Public License as published by
   6 * the Free Software Foundation; either version 2 of the License, or
   7 * (at your option) any later version.
   8 *
   9 * This is distributed in the hope that it will be useful,
  10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 * GNU General Public License for more details.
  13 *
  14 * You should have received a copy of the GNU General Public License
  15 * along with this program; if not, write to the Free Software
  16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
  17 * USA.
  18 */
  19
  20#include <asm/byteorder.h>
  21#include <linux/kthread.h>
  22#include <linux/usb.h>
  23#include <linux/usb/hcd.h>
  24
  25#include "usbip_common.h"
  26#include "stub.h"
  27
  28static int is_clear_halt_cmd(struct urb *urb)
  29{
  30        struct usb_ctrlrequest *req;
  31
  32        req = (struct usb_ctrlrequest *) urb->setup_packet;
  33
  34         return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
  35                 (req->bRequestType == USB_RECIP_ENDPOINT) &&
  36                 (req->wValue == USB_ENDPOINT_HALT);
  37}
  38
  39static int is_set_interface_cmd(struct urb *urb)
  40{
  41        struct usb_ctrlrequest *req;
  42
  43        req = (struct usb_ctrlrequest *) urb->setup_packet;
  44
  45        return (req->bRequest == USB_REQ_SET_INTERFACE) &&
  46                (req->bRequestType == USB_RECIP_INTERFACE);
  47}
  48
  49static int is_set_configuration_cmd(struct urb *urb)
  50{
  51        struct usb_ctrlrequest *req;
  52
  53        req = (struct usb_ctrlrequest *) urb->setup_packet;
  54
  55        return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
  56                (req->bRequestType == USB_RECIP_DEVICE);
  57}
  58
  59static int is_reset_device_cmd(struct urb *urb)
  60{
  61        struct usb_ctrlrequest *req;
  62        __u16 value;
  63        __u16 index;
  64
  65        req = (struct usb_ctrlrequest *) urb->setup_packet;
  66        value = le16_to_cpu(req->wValue);
  67        index = le16_to_cpu(req->wIndex);
  68
  69        if ((req->bRequest == USB_REQ_SET_FEATURE) &&
  70            (req->bRequestType == USB_RT_PORT) &&
  71            (value == USB_PORT_FEAT_RESET)) {
  72                usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
  73                return 1;
  74        } else
  75                return 0;
  76}
  77
  78static int tweak_clear_halt_cmd(struct urb *urb)
  79{
  80        struct usb_ctrlrequest *req;
  81        int target_endp;
  82        int target_dir;
  83        int target_pipe;
  84        int ret;
  85
  86        req = (struct usb_ctrlrequest *) urb->setup_packet;
  87
  88        /*
  89         * The stalled endpoint is specified in the wIndex value. The endpoint
  90         * of the urb is the target of this clear_halt request (i.e., control
  91         * endpoint).
  92         */
  93        target_endp = le16_to_cpu(req->wIndex) & 0x000f;
  94
  95        /* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80.  */
  96        target_dir = le16_to_cpu(req->wIndex) & 0x0080;
  97
  98        if (target_dir)
  99                target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
 100        else
 101                target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
 102
 103        ret = usb_clear_halt(urb->dev, target_pipe);
 104        if (ret < 0)
 105                dev_err(&urb->dev->dev,
 106                        "usb_clear_halt error: devnum %d endp %d ret %d\n",
 107                        urb->dev->devnum, target_endp, ret);
 108        else
 109                dev_info(&urb->dev->dev,
 110                         "usb_clear_halt done: devnum %d endp %d\n",
 111                         urb->dev->devnum, target_endp);
 112
 113        return ret;
 114}
 115
 116static int tweak_set_interface_cmd(struct urb *urb)
 117{
 118        struct usb_ctrlrequest *req;
 119        __u16 alternate;
 120        __u16 interface;
 121        int ret;
 122
 123        req = (struct usb_ctrlrequest *) urb->setup_packet;
 124        alternate = le16_to_cpu(req->wValue);
 125        interface = le16_to_cpu(req->wIndex);
 126
 127        usbip_dbg_stub_rx("set_interface: inf %u alt %u\n",
 128                          interface, alternate);
 129
 130        ret = usb_set_interface(urb->dev, interface, alternate);
 131        if (ret < 0)
 132                dev_err(&urb->dev->dev,
 133                        "usb_set_interface error: inf %u alt %u ret %d\n",
 134                        interface, alternate, ret);
 135        else
 136                dev_info(&urb->dev->dev,
 137                        "usb_set_interface done: inf %u alt %u\n",
 138                        interface, alternate);
 139
 140        return ret;
 141}
 142
 143static int tweak_set_configuration_cmd(struct urb *urb)
 144{
 145        struct stub_priv *priv = (struct stub_priv *) urb->context;
 146        struct stub_device *sdev = priv->sdev;
 147        struct usb_ctrlrequest *req;
 148        __u16 config;
 149        int err;
 150
 151        req = (struct usb_ctrlrequest *) urb->setup_packet;
 152        config = le16_to_cpu(req->wValue);
 153
 154        err = usb_set_configuration(sdev->udev, config);
 155        if (err && err != -ENODEV)
 156                dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
 157                        config, err);
 158        return 0;
 159}
 160
 161static int tweak_reset_device_cmd(struct urb *urb)
 162{
 163        struct stub_priv *priv = (struct stub_priv *) urb->context;
 164        struct stub_device *sdev = priv->sdev;
 165
 166        dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
 167
 168        if (usb_lock_device_for_reset(sdev->udev, NULL) < 0) {
 169                dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
 170                return 0;
 171        }
 172        usb_reset_device(sdev->udev);
 173        usb_unlock_device(sdev->udev);
 174
 175        return 0;
 176}
 177
 178/*
 179 * clear_halt, set_interface, and set_configuration require special tricks.
 180 */
 181static void tweak_special_requests(struct urb *urb)
 182{
 183        if (!urb || !urb->setup_packet)
 184                return;
 185
 186        if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
 187                return;
 188
 189        if (is_clear_halt_cmd(urb))
 190                /* tweak clear_halt */
 191                 tweak_clear_halt_cmd(urb);
 192
 193        else if (is_set_interface_cmd(urb))
 194                /* tweak set_interface */
 195                tweak_set_interface_cmd(urb);
 196
 197        else if (is_set_configuration_cmd(urb))
 198                /* tweak set_configuration */
 199                tweak_set_configuration_cmd(urb);
 200
 201        else if (is_reset_device_cmd(urb))
 202                tweak_reset_device_cmd(urb);
 203        else
 204                usbip_dbg_stub_rx("no need to tweak\n");
 205}
 206
 207/*
 208 * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
 209 * By unlinking the urb asynchronously, stub_rx can continuously
 210 * process coming urbs.  Even if the urb is unlinked, its completion
 211 * handler will be called and stub_tx will send a return pdu.
 212 *
 213 * See also comments about unlinking strategy in vhci_hcd.c.
 214 */
 215static int stub_recv_cmd_unlink(struct stub_device *sdev,
 216                                struct usbip_header *pdu)
 217{
 218        int ret;
 219        unsigned long flags;
 220        struct stub_priv *priv;
 221
 222        spin_lock_irqsave(&sdev->priv_lock, flags);
 223
 224        list_for_each_entry(priv, &sdev->priv_init, list) {
 225                if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
 226                        continue;
 227
 228                dev_info(&priv->urb->dev->dev, "unlink urb %p\n",
 229                         priv->urb);
 230
 231                /*
 232                 * This matched urb is not completed yet (i.e., be in
 233                 * flight in usb hcd hardware/driver). Now we are
 234                 * cancelling it. The unlinking flag means that we are
 235                 * now not going to return the normal result pdu of a
 236                 * submission request, but going to return a result pdu
 237                 * of the unlink request.
 238                 */
 239                priv->unlinking = 1;
 240
 241                /*
 242                 * In the case that unlinking flag is on, prev->seqnum
 243                 * is changed from the seqnum of the cancelling urb to
 244                 * the seqnum of the unlink request. This will be used
 245                 * to make the result pdu of the unlink request.
 246                 */
 247                priv->seqnum = pdu->base.seqnum;
 248
 249                spin_unlock_irqrestore(&sdev->priv_lock, flags);
 250
 251                /*
 252                 * usb_unlink_urb() is now out of spinlocking to avoid
 253                 * spinlock recursion since stub_complete() is
 254                 * sometimes called in this context but not in the
 255                 * interrupt context.  If stub_complete() is executed
 256                 * before we call usb_unlink_urb(), usb_unlink_urb()
 257                 * will return an error value. In this case, stub_tx
 258                 * will return the result pdu of this unlink request
 259                 * though submission is completed and actual unlinking
 260                 * is not executed. OK?
 261                 */
 262                /* In the above case, urb->status is not -ECONNRESET,
 263                 * so a driver in a client host will know the failure
 264                 * of the unlink request ?
 265                 */
 266                ret = usb_unlink_urb(priv->urb);
 267                if (ret != -EINPROGRESS)
 268                        dev_err(&priv->urb->dev->dev,
 269                                "failed to unlink a urb %p, ret %d\n",
 270                                priv->urb, ret);
 271
 272                return 0;
 273        }
 274
 275        usbip_dbg_stub_rx("seqnum %d is not pending\n",
 276                          pdu->u.cmd_unlink.seqnum);
 277
 278        /*
 279         * The urb of the unlink target is not found in priv_init queue. It was
 280         * already completed and its results is/was going to be sent by a
 281         * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
 282         * return the completeness of this unlink request to vhci_hcd.
 283         */
 284        stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
 285
 286        spin_unlock_irqrestore(&sdev->priv_lock, flags);
 287
 288        return 0;
 289}
 290
 291static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
 292{
 293        struct usbip_device *ud = &sdev->ud;
 294        int valid = 0;
 295
 296        if (pdu->base.devid == sdev->devid) {
 297                spin_lock_irq(&ud->lock);
 298                if (ud->status == SDEV_ST_USED) {
 299                        /* A request is valid. */
 300                        valid = 1;
 301                }
 302                spin_unlock_irq(&ud->lock);
 303        }
 304
 305        return valid;
 306}
 307
 308static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
 309                                         struct usbip_header *pdu)
 310{
 311        struct stub_priv *priv;
 312        struct usbip_device *ud = &sdev->ud;
 313        unsigned long flags;
 314
 315        spin_lock_irqsave(&sdev->priv_lock, flags);
 316
 317        priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
 318        if (!priv) {
 319                dev_err(&sdev->udev->dev, "alloc stub_priv\n");
 320                spin_unlock_irqrestore(&sdev->priv_lock, flags);
 321                usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
 322                return NULL;
 323        }
 324
 325        priv->seqnum = pdu->base.seqnum;
 326        priv->sdev = sdev;
 327
 328        /*
 329         * After a stub_priv is linked to a list_head,
 330         * our error handler can free allocated data.
 331         */
 332        list_add_tail(&priv->list, &sdev->priv_init);
 333
 334        spin_unlock_irqrestore(&sdev->priv_lock, flags);
 335
 336        return priv;
 337}
 338
 339static int get_pipe(struct stub_device *sdev, int epnum, int dir)
 340{
 341        struct usb_device *udev = sdev->udev;
 342        struct usb_host_endpoint *ep;
 343        struct usb_endpoint_descriptor *epd = NULL;
 344
 345        if (dir == USBIP_DIR_IN)
 346                ep = udev->ep_in[epnum & 0x7f];
 347        else
 348                ep = udev->ep_out[epnum & 0x7f];
 349        if (!ep) {
 350                dev_err(&sdev->udev->dev, "no such endpoint?, %d\n",
 351                        epnum);
 352                BUG();
 353        }
 354
 355        epd = &ep->desc;
 356        if (usb_endpoint_xfer_control(epd)) {
 357                if (dir == USBIP_DIR_OUT)
 358                        return usb_sndctrlpipe(udev, epnum);
 359                else
 360                        return usb_rcvctrlpipe(udev, epnum);
 361        }
 362
 363        if (usb_endpoint_xfer_bulk(epd)) {
 364                if (dir == USBIP_DIR_OUT)
 365                        return usb_sndbulkpipe(udev, epnum);
 366                else
 367                        return usb_rcvbulkpipe(udev, epnum);
 368        }
 369
 370        if (usb_endpoint_xfer_int(epd)) {
 371                if (dir == USBIP_DIR_OUT)
 372                        return usb_sndintpipe(udev, epnum);
 373                else
 374                        return usb_rcvintpipe(udev, epnum);
 375        }
 376
 377        if (usb_endpoint_xfer_isoc(epd)) {
 378                if (dir == USBIP_DIR_OUT)
 379                        return usb_sndisocpipe(udev, epnum);
 380                else
 381                        return usb_rcvisocpipe(udev, epnum);
 382        }
 383
 384        /* NOT REACHED */
 385        dev_err(&sdev->udev->dev, "get pipe, epnum %d\n", epnum);
 386        return 0;
 387}
 388
 389static void masking_bogus_flags(struct urb *urb)
 390{
 391        int                             xfertype;
 392        struct usb_device               *dev;
 393        struct usb_host_endpoint        *ep;
 394        int                             is_out;
 395        unsigned int    allowed;
 396
 397        if (!urb || urb->hcpriv || !urb->complete)
 398                return;
 399        dev = urb->dev;
 400        if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
 401                return;
 402
 403        ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
 404                [usb_pipeendpoint(urb->pipe)];
 405        if (!ep)
 406                return;
 407
 408        xfertype = usb_endpoint_type(&ep->desc);
 409        if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
 410                struct usb_ctrlrequest *setup =
 411                        (struct usb_ctrlrequest *) urb->setup_packet;
 412
 413                if (!setup)
 414                        return;
 415                is_out = !(setup->bRequestType & USB_DIR_IN) ||
 416                        !setup->wLength;
 417        } else {
 418                is_out = usb_endpoint_dir_out(&ep->desc);
 419        }
 420
 421        /* enforce simple/standard policy */
 422        allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
 423                   URB_DIR_MASK | URB_FREE_BUFFER);
 424        switch (xfertype) {
 425        case USB_ENDPOINT_XFER_BULK:
 426                if (is_out)
 427                        allowed |= URB_ZERO_PACKET;
 428                /* FALLTHROUGH */
 429        case USB_ENDPOINT_XFER_CONTROL:
 430                allowed |= URB_NO_FSBR; /* only affects UHCI */
 431                /* FALLTHROUGH */
 432        default:                        /* all non-iso endpoints */
 433                if (!is_out)
 434                        allowed |= URB_SHORT_NOT_OK;
 435                break;
 436        case USB_ENDPOINT_XFER_ISOC:
 437                allowed |= URB_ISO_ASAP;
 438                break;
 439        }
 440        urb->transfer_flags &= allowed;
 441}
 442
 443static void stub_recv_cmd_submit(struct stub_device *sdev,
 444                                 struct usbip_header *pdu)
 445{
 446        int ret;
 447        struct stub_priv *priv;
 448        struct usbip_device *ud = &sdev->ud;
 449        struct usb_device *udev = sdev->udev;
 450        int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction);
 451
 452        priv = stub_priv_alloc(sdev, pdu);
 453        if (!priv)
 454                return;
 455
 456        /* setup a urb */
 457        if (usb_pipeisoc(pipe))
 458                priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
 459                                          GFP_KERNEL);
 460        else
 461                priv->urb = usb_alloc_urb(0, GFP_KERNEL);
 462
 463        if (!priv->urb) {
 464                usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
 465                return;
 466        }
 467
 468        /* allocate urb transfer buffer, if needed */
 469        if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
 470                priv->urb->transfer_buffer =
 471                        kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
 472                                GFP_KERNEL);
 473                if (!priv->urb->transfer_buffer) {
 474                        usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
 475                        return;
 476                }
 477        }
 478
 479        /* copy urb setup packet */
 480        priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
 481                                          GFP_KERNEL);
 482        if (!priv->urb->setup_packet) {
 483                dev_err(&udev->dev, "allocate setup_packet\n");
 484                usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
 485                return;
 486        }
 487
 488        /* set other members from the base header of pdu */
 489        priv->urb->context                = (void *) priv;
 490        priv->urb->dev                    = udev;
 491        priv->urb->pipe                   = pipe;
 492        priv->urb->complete               = stub_complete;
 493
 494        usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
 495
 496
 497        if (usbip_recv_xbuff(ud, priv->urb) < 0)
 498                return;
 499
 500        if (usbip_recv_iso(ud, priv->urb) < 0)
 501                return;
 502
 503        /* no need to submit an intercepted request, but harmless? */
 504        tweak_special_requests(priv->urb);
 505
 506        masking_bogus_flags(priv->urb);
 507        /* urb is now ready to submit */
 508        ret = usb_submit_urb(priv->urb, GFP_KERNEL);
 509
 510        if (ret == 0)
 511                usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
 512                                  pdu->base.seqnum);
 513        else {
 514                dev_err(&udev->dev, "submit_urb error, %d\n", ret);
 515                usbip_dump_header(pdu);
 516                usbip_dump_urb(priv->urb);
 517
 518                /*
 519                 * Pessimistic.
 520                 * This connection will be discarded.
 521                 */
 522                usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
 523        }
 524
 525        usbip_dbg_stub_rx("Leave\n");
 526}
 527
 528/* recv a pdu */
 529static void stub_rx_pdu(struct usbip_device *ud)
 530{
 531        int ret;
 532        struct usbip_header pdu;
 533        struct stub_device *sdev = container_of(ud, struct stub_device, ud);
 534        struct device *dev = &sdev->udev->dev;
 535
 536        usbip_dbg_stub_rx("Enter\n");
 537
 538        memset(&pdu, 0, sizeof(pdu));
 539
 540        /* receive a pdu header */
 541        ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
 542        if (ret != sizeof(pdu)) {
 543                dev_err(dev, "recv a header, %d\n", ret);
 544                usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
 545                return;
 546        }
 547
 548        usbip_header_correct_endian(&pdu, 0);
 549
 550        if (usbip_dbg_flag_stub_rx)
 551                usbip_dump_header(&pdu);
 552
 553        if (!valid_request(sdev, &pdu)) {
 554                dev_err(dev, "recv invalid request\n");
 555                usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
 556                return;
 557        }
 558
 559        switch (pdu.base.command) {
 560        case USBIP_CMD_UNLINK:
 561                stub_recv_cmd_unlink(sdev, &pdu);
 562                break;
 563
 564        case USBIP_CMD_SUBMIT:
 565                stub_recv_cmd_submit(sdev, &pdu);
 566                break;
 567
 568        default:
 569                /* NOTREACHED */
 570                dev_err(dev, "unknown pdu\n");
 571                usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
 572                break;
 573        }
 574}
 575
 576int stub_rx_loop(void *data)
 577{
 578        struct usbip_device *ud = data;
 579
 580        while (!kthread_should_stop()) {
 581                if (usbip_event_happened(ud))
 582                        break;
 583
 584                stub_rx_pdu(ud);
 585        }
 586
 587        return 0;
 588}
 589