/*
 * linux/mdio.h: definitions for MDIO (clause 45) transceivers
 * Copyright 2006-2009 Solarflare Communications Inc.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published
 * by the Free Software Foundation, incorporated herein by reference.
 */
#ifndef __LINUX_MDIO_H__
#define __LINUX_MDIO_H__

#include <uapi/linux/mdio.h>
#include <linux/mod_devicetable.h>

struct mii_bus;

/* Multiple levels of nesting are possible. However typically this is
 * limited to nested DSA like layer, a MUX layer, and the normal
 * user. Instead of trying to handle the general case, just define
 * these cases.
 */
enum mdio_mutex_lock_class {
        MDIO_MUTEX_NORMAL,
        MDIO_MUTEX_MUX,
        MDIO_MUTEX_NESTED,
};

struct mdio_device {
        struct device dev;

        const struct dev_pm_ops *pm_ops;
        struct mii_bus *bus;
        char modalias[MDIO_NAME_SIZE];

        int (*bus_match)(struct device *dev, struct device_driver *drv);
        void (*device_free)(struct mdio_device *mdiodev);
        void (*device_remove)(struct mdio_device *mdiodev);

        /* Bus address of the MDIO device (0-31) */
        int addr;
        int flags;
};
#define to_mdio_device(d) container_of(d, struct mdio_device, dev)

/* struct mdio_driver_common: Common to all MDIO drivers */
struct mdio_driver_common {
        struct device_driver driver;
        int flags;
};
#define MDIO_DEVICE_FLAG_PHY            1
#define to_mdio_common_driver(d) \
        container_of(d, struct mdio_driver_common, driver)

/* struct mdio_driver: Generic MDIO driver */
struct mdio_driver {
        struct mdio_driver_common mdiodrv;

        /*
         * Called during discovery.  Used to set
         * up device-specific structures, if any
         */
        int (*probe)(struct mdio_device *mdiodev);

        /* Clears up any memory if needed */
        void (*remove)(struct mdio_device *mdiodev);
};
#define to_mdio_driver(d)                                               \
        container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv)

void mdio_device_free(struct mdio_device *mdiodev);
struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr);
int mdio_device_register(struct mdio_device *mdiodev);
void mdio_device_remove(struct mdio_device *mdiodev);
int mdio_driver_register(struct mdio_driver *drv);
void mdio_driver_unregister(struct mdio_driver *drv);
int mdio_device_bus_match(struct device *dev, struct device_driver *drv);

static inline bool mdio_phy_id_is_c45(int phy_id)
{
        return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
}

static inline __u16 mdio_phy_id_prtad(int phy_id)
{
        return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
}

static inline __u16 mdio_phy_id_devad(int phy_id)
{
        return phy_id & MDIO_PHY_ID_DEVAD;
}

/**
 * struct mdio_if_info - Ethernet controller MDIO interface
 * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
 * @mmds: Mask of MMDs expected to be present in the PHY.  This must be
 *      non-zero unless @prtad = %MDIO_PRTAD_NONE.
 * @mode_support: MDIO modes supported.  If %MDIO_SUPPORTS_C22 is set then
 *      MII register access will be passed through with @devad =
 *      %MDIO_DEVAD_NONE.  If %MDIO_EMULATE_C22 is set then access to
 *      commonly used clause 22 registers will be translated into
 *      clause 45 registers.
 * @dev: Net device structure
 * @mdio_read: Register read function; returns value or negative error code
 * @mdio_write: Register write function; returns 0 or negative error code
 */
struct mdio_if_info {
        int prtad;
        u32 mmds;
        unsigned mode_support;

        struct net_device *dev;
        int (*mdio_read)(struct net_device *dev, int prtad, int devad,
                         u16 addr);
        int (*mdio_write)(struct net_device *dev, int prtad, int devad,
                          u16 addr, u16 val);
};

#define MDIO_PRTAD_NONE                 (-1)
#define MDIO_DEVAD_NONE                 (-1)
#define MDIO_SUPPORTS_C22               1
#define MDIO_SUPPORTS_C45               2
#define MDIO_EMULATE_C22                4

struct ethtool_cmd;
struct ethtool_pauseparam;
extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
extern int mdio_set_flag(const struct mdio_if_info *mdio,
                         int prtad, int devad, u16 addr, int mask,
                         bool sense);
extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
                                      struct ethtool_cmd *ecmd,
                                      u32 npage_adv, u32 npage_lpa);
extern void
mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio,
                                   struct ethtool_link_ksettings *cmd,
                                   u32 npage_adv, u32 npage_lpa);

/**
 * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
 * @mdio: MDIO interface
 * @ecmd: Ethtool request structure
 *
 * Since the CSRs for auto-negotiation using next pages are not fully
 * standardised, this function does not attempt to decode them.  Use
 * mdio45_ethtool_gset_npage() to specify advertisement bits from next
 * pages.
 */
static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
                                       struct ethtool_cmd *ecmd)
{
        mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
}

/**
 * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS
 * @mdio: MDIO interface
 * @cmd: Ethtool request structure
 *
 * Since the CSRs for auto-negotiation using next pages are not fully
 * standardised, this function does not attempt to decode them.  Use
 * mdio45_ethtool_ksettings_get_npage() to specify advertisement bits
 * from next pages.
 */
static inline void
mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio,
                             struct ethtool_link_ksettings *cmd)
{
        mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0);
}

extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
                          struct mii_ioctl_data *mii_data, int cmd);

/**
 * mmd_eee_cap_to_ethtool_sup_t
 * @eee_cap: value of the MMD EEE Capability register
 *
 * A small helper function that translates MMD EEE Capability (3.20) bits
 * to ethtool supported settings.
 */
static inline u32 mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap)
{
        u32 supported = 0;

        if (eee_cap & MDIO_EEE_100TX)
                supported |= SUPPORTED_100baseT_Full;
        if (eee_cap & MDIO_EEE_1000T)
                supported |= SUPPORTED_1000baseT_Full;
        if (eee_cap & MDIO_EEE_10GT)
                supported |= SUPPORTED_10000baseT_Full;
        if (eee_cap & MDIO_EEE_1000KX)
                supported |= SUPPORTED_1000baseKX_Full;
        if (eee_cap & MDIO_EEE_10GKX4)
                supported |= SUPPORTED_10000baseKX4_Full;
        if (eee_cap & MDIO_EEE_10GKR)
                supported |= SUPPORTED_10000baseKR_Full;

        return supported;
}

/**
 * mmd_eee_adv_to_ethtool_adv_t
 * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers
 *
 * A small helper function that translates the MMD EEE Advertisment (7.60)
 * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement
 * settings.
 */
static inline u32 mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv)
{
        u32 adv = 0;

        if (eee_adv & MDIO_EEE_100TX)
                adv |= ADVERTISED_100baseT_Full;
        if (eee_adv & MDIO_EEE_1000T)
                adv |= ADVERTISED_1000baseT_Full;
        if (eee_adv & MDIO_EEE_10GT)
                adv |= ADVERTISED_10000baseT_Full;
        if (eee_adv & MDIO_EEE_1000KX)
                adv |= ADVERTISED_1000baseKX_Full;
        if (eee_adv & MDIO_EEE_10GKX4)
                adv |= ADVERTISED_10000baseKX4_Full;
        if (eee_adv & MDIO_EEE_10GKR)
                adv |= ADVERTISED_10000baseKR_Full;

        return adv;
}

/**
 * ethtool_adv_to_mmd_eee_adv_t
 * @adv: the ethtool advertisement settings
 *
 * A small helper function that translates ethtool advertisement settings
 * to EEE advertisements for the MMD EEE Advertisement (7.60) and
 * MMD EEE Link Partner Ability (7.61) registers.
 */
static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
{
        u16 reg = 0;

        if (adv & ADVERTISED_100baseT_Full)
                reg |= MDIO_EEE_100TX;
        if (adv & ADVERTISED_1000baseT_Full)
                reg |= MDIO_EEE_1000T;
        if (adv & ADVERTISED_10000baseT_Full)
                reg |= MDIO_EEE_10GT;
        if (adv & ADVERTISED_1000baseKX_Full)
                reg |= MDIO_EEE_1000KX;
        if (adv & ADVERTISED_10000baseKX4_Full)
                reg |= MDIO_EEE_10GKX4;
        if (adv & ADVERTISED_10000baseKR_Full)
                reg |= MDIO_EEE_10GKR;

        return reg;
}

int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val);

int mdiobus_register_device(struct mdio_device *mdiodev);
int mdiobus_unregister_device(struct mdio_device *mdiodev);
bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);

/**
 * mdio_module_driver() - Helper macro for registering mdio drivers
 *
 * Helper macro for MDIO drivers which do not do anything special in module
 * init/exit. Each module may only use this macro once, and calling it
 * replaces module_init() and module_exit().
 */
#define mdio_module_driver(_mdio_driver)                                \
static int __init mdio_module_init(void)                                \
{                                                                       \
        return mdio_driver_register(&_mdio_driver);                     \
}                                                                       \
module_init(mdio_module_init);                                          \
static void __exit mdio_module_exit(void)                               \
{                                                                       \
        mdio_driver_unregister(&_mdio_driver);                          \
}                                                                       \
module_exit(mdio_module_exit)

#endif /* __LINUX_MDIO_H__ */