linux/include/linux/mfd/si476x-core.h
<<
>>
Prefs
   1/*
   2 * include/media/si476x-core.h -- Common definitions for si476x core
   3 * device
   4 *
   5 * Copyright (C) 2012 Innovative Converged Devices(ICD)
   6 * Copyright (C) 2013 Andrey Smirnov
   7 *
   8 * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; version 2 of the License.
  13 *
  14 * This program is distributed in the hope that it will be useful, but
  15 * WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17 * General Public License for more details.
  18 *
  19 */
  20
  21#ifndef SI476X_CORE_H
  22#define SI476X_CORE_H
  23
  24#include <linux/kfifo.h>
  25#include <linux/atomic.h>
  26#include <linux/i2c.h>
  27#include <linux/regmap.h>
  28#include <linux/mutex.h>
  29#include <linux/mfd/core.h>
  30#include <linux/videodev2.h>
  31#include <linux/regulator/consumer.h>
  32
  33#include <linux/mfd/si476x-platform.h>
  34#include <linux/mfd/si476x-reports.h>
  35
  36/* Command Timeouts */
  37#define SI476X_DEFAULT_TIMEOUT  100000
  38#define SI476X_TIMEOUT_TUNE     700000
  39#define SI476X_TIMEOUT_POWER_UP 330000
  40#define SI476X_STATUS_POLL_US   0
  41
  42/* -------------------- si476x-i2c.c ----------------------- */
  43
  44enum si476x_freq_supported_chips {
  45        SI476X_CHIP_SI4761 = 1,
  46        SI476X_CHIP_SI4764,
  47        SI476X_CHIP_SI4768,
  48};
  49
  50enum si476x_part_revisions {
  51        SI476X_REVISION_A10 = 0,
  52        SI476X_REVISION_A20 = 1,
  53        SI476X_REVISION_A30 = 2,
  54};
  55
  56enum si476x_mfd_cells {
  57        SI476X_RADIO_CELL = 0,
  58        SI476X_CODEC_CELL,
  59        SI476X_MFD_CELLS,
  60};
  61
  62/**
  63 * enum si476x_power_state - possible power state of the si476x
  64 * device.
  65 *
  66 * @SI476X_POWER_DOWN: In this state all regulators are turned off
  67 * and the reset line is pulled low. The device is completely
  68 * inactive.
  69 * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
  70 * turned on, reset line pulled high, IRQ line is enabled(polling is
  71 * active for polling use scenario) and device is turned on with
  72 * POWER_UP command. The device is ready to be used.
  73 * @SI476X_POWER_INCONSISTENT: This state indicates that previous
  74 * power down was inconsistent, meaning some of the regulators were
  75 * not turned down and thus use of the device, without power-cycling
  76 * is impossible.
  77 */
  78enum si476x_power_state {
  79        SI476X_POWER_DOWN               = 0,
  80        SI476X_POWER_UP_FULL            = 1,
  81        SI476X_POWER_INCONSISTENT       = 2,
  82};
  83
  84/**
  85 * struct si476x_core - internal data structure representing the
  86 * underlying "core" device which all the MFD cell-devices use.
  87 *
  88 * @client: Actual I2C client used to transfer commands to the chip.
  89 * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
  90 * @cells: MFD cell devices created by this driver.
  91 * @cmd_lock: Mutex used to serialize all the requests to the core
  92 * device. This filed should not be used directly. Instead
  93 * si476x_core_lock()/si476x_core_unlock() should be used to get
  94 * exclusive access to the "core" device.
  95 * @users: Active users counter(Used by the radio cell)
  96 * @rds_read_queue: Wait queue used to wait for RDS data.
  97 * @rds_fifo: FIFO in which all the RDS data received from the chip is
  98 * placed.
  99 * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
 100 * @rds_drainer_is_working: Flag used for launching only one instance
 101 * of the @rds_fifo_drainer.
 102 * @rds_drainer_status_lock: Lock used to guard access to the
 103 * @rds_drainer_is_working variable.
 104 * @command: Wait queue for wainting on the command comapletion.
 105 * @cts: Clear To Send flag set upon receiving first status with CTS
 106 * set.
 107 * @tuning: Wait queue used for wainting for tune/seek comand
 108 * completion.
 109 * @stc: Similar to @cts, but for the STC bit of the status value.
 110 * @power_up_parameters: Parameters used as argument for POWER_UP
 111 * command when the device is started.
 112 * @state: Current power state of the device.
 113 * @supplues: Structure containing handles to all power supplies used
 114 * by the device (NULL ones are ignored).
 115 * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
 116 * @pinmux: Chip's configurable pins configuration.
 117 * @diversity_mode: Chips role when functioning in diversity mode.
 118 * @status_monitor: Polling worker used in polling use case scenarion
 119 * (when IRQ is not avalible).
 120 * @revision: Chip's running firmware revision number(Used for correct
 121 * command set support).
 122 */
 123
 124struct si476x_core {
 125        struct i2c_client *client;
 126        struct regmap *regmap;
 127        int chip_id;
 128        struct mfd_cell cells[SI476X_MFD_CELLS];
 129
 130        struct mutex cmd_lock; /* for serializing fm radio operations */
 131        atomic_t users;
 132
 133        wait_queue_head_t  rds_read_queue;
 134        struct kfifo       rds_fifo;
 135        struct work_struct rds_fifo_drainer;
 136        bool               rds_drainer_is_working;
 137        struct mutex       rds_drainer_status_lock;
 138
 139        wait_queue_head_t command;
 140        atomic_t          cts;
 141
 142        wait_queue_head_t tuning;
 143        atomic_t          stc;
 144
 145        struct si476x_power_up_args power_up_parameters;
 146
 147        enum si476x_power_state power_state;
 148
 149        struct regulator_bulk_data supplies[4];
 150
 151        int gpio_reset;
 152
 153        struct si476x_pinmux pinmux;
 154        enum si476x_phase_diversity_mode diversity_mode;
 155
 156        atomic_t is_alive;
 157
 158        struct delayed_work status_monitor;
 159#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \
 160                                            struct si476x_core, \
 161                                            status_monitor)
 162
 163        int revision;
 164
 165        int rds_fifo_depth;
 166};
 167
 168static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
 169{
 170        struct i2c_client *client = to_i2c_client(dev->parent);
 171        return i2c_get_clientdata(client);
 172}
 173
 174
 175/**
 176 * si476x_core_lock() - lock the core device to get an exclusive access
 177 * to it.
 178 */
 179static inline void si476x_core_lock(struct si476x_core *core)
 180{
 181        mutex_lock(&core->cmd_lock);
 182}
 183
 184/**
 185 * si476x_core_unlock() - unlock the core device to relinquish an
 186 * exclusive access to it.
 187 */
 188static inline void si476x_core_unlock(struct si476x_core *core)
 189{
 190        mutex_unlock(&core->cmd_lock);
 191}
 192
 193/* *_TUNE_FREQ family of commands accept frequency in multiples of
 194    10kHz */
 195static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
 196{
 197        u16 result;
 198
 199        switch (core->power_up_parameters.func) {
 200        default:
 201        case SI476X_FUNC_FM_RECEIVER:
 202                result = freq / 10000;
 203                break;
 204        case SI476X_FUNC_AM_RECEIVER:
 205                result = freq / 1000;
 206                break;
 207        }
 208
 209        return result;
 210}
 211
 212static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
 213{
 214        int result;
 215
 216        switch (core->power_up_parameters.func) {
 217        default:
 218        case SI476X_FUNC_FM_RECEIVER:
 219                result = freq * 10000;
 220                break;
 221        case SI476X_FUNC_AM_RECEIVER:
 222                result = freq * 1000;
 223                break;
 224        }
 225
 226        return result;
 227}
 228
 229/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
 230 * mesures frequency in 62.5 Hz units */
 231
 232static inline int hz_to_v4l2(int freq)
 233{
 234        return (freq * 10) / 625;
 235}
 236
 237static inline int v4l2_to_hz(int freq)
 238{
 239        return (freq * 625) / 10;
 240}
 241
 242static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
 243{
 244        return hz_to_si476x(core, v4l2_to_hz(freq));
 245}
 246
 247static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
 248{
 249        return hz_to_v4l2(si476x_to_hz(core, freq));
 250}
 251
 252
 253
 254/**
 255 * struct si476x_func_info - structure containing result of the
 256 * FUNC_INFO command.
 257 *
 258 * @firmware.major: Firmware major number.
 259 * @firmware.minor[...]: Firmware minor numbers.
 260 * @patch_id:
 261 * @func: Mode tuner is working in.
 262 */
 263struct si476x_func_info {
 264        struct {
 265                u8 major, minor[2];
 266        } firmware;
 267        u16 patch_id;
 268        enum si476x_func func;
 269};
 270
 271/**
 272 * struct si476x_power_down_args - structure used to pass parameters
 273 * to POWER_DOWN command
 274 *
 275 * @xosc: true - Power down, but leav oscillator running.
 276 *        false - Full power down.
 277 */
 278struct si476x_power_down_args {
 279        bool xosc;
 280};
 281
 282/**
 283 * enum si476x_tunemode - enum representing possible tune modes for
 284 * the chip.
 285 * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
 286 * channel after tune, tune status is valid.
 287 * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
 288 * channel after tune, tune status invalid.
 289 * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
 290 * metric thresholds are not met.
 291 * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
 292 * previous channel.
 293 */
 294enum si476x_tunemode {
 295        SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
 296        SI476X_TM_INVALIDATED_FAST_TUNE = 1,
 297        SI476X_TM_VALIDATED_AF_TUNE     = 2,
 298        SI476X_TM_VALIDATED_AF_CHECK    = 3,
 299};
 300
 301/**
 302 * enum si476x_smoothmetrics - enum containing the possible setting fo
 303 * audio transitioning of the chip
 304 * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
 305 * new channel
 306 * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
 307 * channel values to the new values
 308 */
 309enum si476x_smoothmetrics {
 310        SI476X_SM_INITIALIZE_AUDIO = 0,
 311        SI476X_SM_TRANSITION_AUDIO = 1,
 312};
 313
 314/**
 315 * struct si476x_rds_status_report - the structure representing the
 316 * response to 'FM_RD_STATUS' command
 317 * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
 318 * code has changed.
 319 * @rdspiint: Program identification(PI) code has changed.
 320 * @rdssyncint: RDS synchronization has changed.
 321 * @rdsfifoint: RDS was received and the RDS FIFO has at least
 322 * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
 323 * @tpptyvalid: TP flag and PTY code are valid falg.
 324 * @pivalid: PI code is valid flag.
 325 * @rdssync: RDS is currently synchronized.
 326 * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
 327 * @tp: Current channel's TP flag.
 328 * @pty: Current channel's PTY code.
 329 * @pi: Current channel's PI code.
 330 * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
 331 * empty).
 332 */
 333struct si476x_rds_status_report {
 334        bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
 335        bool tpptyvalid, pivalid, rdssync, rdsfifolost;
 336        bool tp;
 337
 338        u8 pty;
 339        u16 pi;
 340
 341        u8 rdsfifoused;
 342        u8 ble[4];
 343
 344        struct v4l2_rds_data rds[4];
 345};
 346
 347struct si476x_rsq_status_args {
 348        bool primary;
 349        bool rsqack;
 350        bool attune;
 351        bool cancel;
 352        bool stcack;
 353};
 354
 355enum si476x_injside {
 356        SI476X_INJSIDE_AUTO     = 0,
 357        SI476X_INJSIDE_LOW      = 1,
 358        SI476X_INJSIDE_HIGH     = 2,
 359};
 360
 361struct si476x_tune_freq_args {
 362        bool zifsr;
 363        bool hd;
 364        enum si476x_injside injside;
 365        int freq;
 366        enum si476x_tunemode tunemode;
 367        enum si476x_smoothmetrics smoothmetrics;
 368        int antcap;
 369};
 370
 371int  si476x_core_stop(struct si476x_core *, bool);
 372int  si476x_core_start(struct si476x_core *, bool);
 373int  si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
 374bool si476x_core_has_am(struct si476x_core *);
 375bool si476x_core_has_diversity(struct si476x_core *);
 376bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
 377bool si476x_core_is_a_primary_tuner(struct si476x_core *);
 378bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
 379bool si476x_core_is_powered_up(struct si476x_core *core);
 380
 381enum si476x_i2c_type {
 382        SI476X_I2C_SEND,
 383        SI476X_I2C_RECV
 384};
 385
 386int si476x_core_i2c_xfer(struct si476x_core *,
 387                         enum si476x_i2c_type,
 388                         char *, int);
 389
 390
 391/* -------------------- si476x-cmd.c ----------------------- */
 392
 393int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
 394int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
 395int si476x_core_cmd_get_property(struct si476x_core *, u16);
 396int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
 397                                      enum si476x_dclk_config,
 398                                      enum si476x_dfs_config,
 399                                      enum si476x_dout_config,
 400                                      enum si476x_xout_config);
 401int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
 402                                enum si476x_iqclk_config,
 403                                enum si476x_iqfs_config,
 404                                enum si476x_iout_config,
 405                                enum si476x_qout_config);
 406int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
 407                                            enum si476x_icin_config,
 408                                            enum si476x_icip_config,
 409                                            enum si476x_icon_config,
 410                                            enum si476x_icop_config);
 411int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
 412                                      enum si476x_lrout_config);
 413int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
 414                                 enum si476x_a1_config);
 415int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
 416int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
 417int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
 418                                  struct si476x_rds_status_report *);
 419int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
 420                                      struct si476x_rds_blockcount_report *);
 421int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
 422                                 struct si476x_tune_freq_args *);
 423int si476x_core_cmd_am_tune_freq(struct si476x_core *,
 424                                 struct si476x_tune_freq_args *);
 425int si476x_core_cmd_am_rsq_status(struct si476x_core *,
 426                                  struct si476x_rsq_status_args *,
 427                                  struct si476x_rsq_status_report *);
 428int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
 429                                  struct si476x_rsq_status_args *,
 430                                  struct si476x_rsq_status_report *);
 431int si476x_core_cmd_power_up(struct si476x_core *,
 432                             struct si476x_power_up_args *);
 433int si476x_core_cmd_power_down(struct si476x_core *,
 434                               struct si476x_power_down_args *);
 435int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
 436int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
 437                                       enum si476x_phase_diversity_mode);
 438
 439int si476x_core_cmd_fm_acf_status(struct si476x_core *,
 440                                  struct si476x_acf_status_report *);
 441int si476x_core_cmd_am_acf_status(struct si476x_core *,
 442                                  struct si476x_acf_status_report *);
 443int si476x_core_cmd_agc_status(struct si476x_core *,
 444                               struct si476x_agc_status_report *);
 445
 446enum si476x_power_grid_type {
 447        SI476X_POWER_GRID_50HZ = 0,
 448        SI476X_POWER_GRID_60HZ,
 449};
 450
 451/* Properties  */
 452
 453enum si476x_interrupt_flags {
 454        SI476X_STCIEN = (1 << 0),
 455        SI476X_ACFIEN = (1 << 1),
 456        SI476X_RDSIEN = (1 << 2),
 457        SI476X_RSQIEN = (1 << 3),
 458
 459        SI476X_ERRIEN = (1 << 6),
 460        SI476X_CTSIEN = (1 << 7),
 461
 462        SI476X_STCREP = (1 << 8),
 463        SI476X_ACFREP = (1 << 9),
 464        SI476X_RDSREP = (1 << 10),
 465        SI476X_RSQREP = (1 << 11),
 466};
 467
 468enum si476x_rdsint_sources {
 469        SI476X_RDSTPPTY = (1 << 4),
 470        SI476X_RDSPI    = (1 << 3),
 471        SI476X_RDSSYNC  = (1 << 1),
 472        SI476X_RDSRECV  = (1 << 0),
 473};
 474
 475enum si476x_status_response_bits {
 476        SI476X_CTS        = (1 << 7),
 477        SI476X_ERR        = (1 << 6),
 478        /* Status response for WB receiver */
 479        SI476X_WB_ASQ_INT = (1 << 4),
 480        SI476X_RSQ_INT    = (1 << 3),
 481        /* Status response for FM receiver */
 482        SI476X_FM_RDS_INT = (1 << 2),
 483        SI476X_ACF_INT    = (1 << 1),
 484        SI476X_STC_INT    = (1 << 0),
 485};
 486
 487/* -------------------- si476x-prop.c ----------------------- */
 488
 489enum si476x_common_receiver_properties {
 490        SI476X_PROP_INT_CTL_ENABLE                      = 0x0000,
 491        SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE        = 0x0200,
 492        SI476X_PROP_DIGITAL_IO_INPUT_FORMAT             = 0x0201,
 493        SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE       = 0x0202,
 494        SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT            = 0x0203,
 495
 496        SI476X_PROP_SEEK_BAND_BOTTOM                    = 0x1100,
 497        SI476X_PROP_SEEK_BAND_TOP                       = 0x1101,
 498        SI476X_PROP_SEEK_FREQUENCY_SPACING              = 0x1102,
 499
 500        SI476X_PROP_VALID_MAX_TUNE_ERROR                = 0x2000,
 501        SI476X_PROP_VALID_SNR_THRESHOLD                 = 0x2003,
 502        SI476X_PROP_VALID_RSSI_THRESHOLD                = 0x2004,
 503};
 504
 505enum si476x_am_receiver_properties {
 506        SI476X_PROP_AUDIO_PWR_LINE_FILTER               = 0x0303,
 507};
 508
 509enum si476x_fm_receiver_properties {
 510        SI476X_PROP_AUDIO_DEEMPHASIS                    = 0x0302,
 511
 512        SI476X_PROP_FM_RDS_INTERRUPT_SOURCE             = 0x4000,
 513        SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT         = 0x4001,
 514        SI476X_PROP_FM_RDS_CONFIG                       = 0x4002,
 515};
 516
 517enum si476x_prop_audio_pwr_line_filter_bits {
 518        SI476X_PROP_PWR_HARMONICS_MASK  = 0x001f,
 519        SI476X_PROP_PWR_GRID_MASK       = 0x0100,
 520        SI476X_PROP_PWR_ENABLE_MASK     = 0x0200,
 521        SI476X_PROP_PWR_GRID_50HZ       = 0x0000,
 522        SI476X_PROP_PWR_GRID_60HZ       = 0x0100,
 523};
 524
 525enum si476x_prop_fm_rds_config_bits {
 526        SI476X_PROP_RDSEN_MASK  = 0x1,
 527        SI476X_PROP_RDSEN       = 0x1,
 528};
 529
 530
 531struct regmap *devm_regmap_init_si476x(struct si476x_core *);
 532
 533#endif  /* SI476X_CORE_H */
 534