/*
 * Apple Onboard Audio driver for Onyx codec
 *
 * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
 *
 * GPL v2, can be found in COPYING.
 *
 *
 * This is a driver for the pcm3052 codec chip (codenamed Onyx)
 * that is present in newer Apple hardware (with digital output).
 *
 * The Onyx codec has the following connections (listed by the bit
 * to be used in aoa_codec.connected):
 *  0: analog output
 *  1: digital output
 *  2: line input
 *  3: microphone input
 * Note that even though I know of no machine that has for example
 * the digital output connected but not the analog, I have handled
 * all the different cases in the code so that this driver may serve
 * as a good example of what to do.
 *
 * NOTE: This driver assumes that there's at most one chip to be
 *       used with one alsa card, in form of creating all kinds
 *       of mixer elements without regard for their existence.
 *       But snd-aoa assumes that there's at most one card, so
 *       this means you can only have one onyx on a system. This
 *       should probably be fixed by changing the assumption of
 *       having just a single card on a system, and making the
 *       'card' pointer accessible to anyone who needs it instead
 *       of hiding it in the aoa_snd_* functions...
 *
 */
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");

#include "onyx.h"
#include "../aoa.h"
#include "../soundbus/soundbus.h"


#define PFX "snd-aoa-codec-onyx: "

struct onyx {
        /* cache registers 65 to 80, they are write-only! */
        u8                      cache[16];
        struct i2c_client       *i2c;
        struct aoa_codec        codec;
        u32                     initialised:1,
                                spdif_locked:1,
                                analog_locked:1,
                                original_mute:2;
        int                     open_count;
        struct codec_info       *codec_info;

        /* mutex serializes concurrent access to the device
         * and this structure.
         */
        struct mutex mutex;
};
#define codec_to_onyx(c) container_of(c, struct onyx, codec)

/* both return 0 if all ok, else on error */
static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
{
        s32 v;

        if (reg != ONYX_REG_CONTROL) {
                *value = onyx->cache[reg-FIRSTREGISTER];
                return 0;
        }
        v = i2c_smbus_read_byte_data(onyx->i2c, reg);
        if (v < 0)
                return -1;
        *value = (u8)v;
        onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
        return 0;
}

static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value)
{
        int result;

        result = i2c_smbus_write_byte_data(onyx->i2c, reg, value);
        if (!result)
                onyx->cache[reg-FIRSTREGISTER] = value;
        return result;
}

/* alsa stuff */

static int onyx_dev_register(struct snd_device *dev)
{
        return 0;
}

static struct snd_device_ops ops = {
        .dev_register = onyx_dev_register,
};

/* this is necessary because most alsa mixer programs
 * can't properly handle the negative range */
#define VOLUME_RANGE_SHIFT      128

static int onyx_snd_vol_info(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_info *uinfo)
{
        uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
        uinfo->count = 2;
        uinfo->value.integer.min = -128 + VOLUME_RANGE_SHIFT;
        uinfo->value.integer.max = -1 + VOLUME_RANGE_SHIFT;
        return 0;
}

static int onyx_snd_vol_get(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        s8 l, r;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
        onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
        mutex_unlock(&onyx->mutex);

        ucontrol->value.integer.value[0] = l + VOLUME_RANGE_SHIFT;
        ucontrol->value.integer.value[1] = r + VOLUME_RANGE_SHIFT;

        return 0;
}

static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        s8 l, r;

        if (ucontrol->value.integer.value[0] < -128 + VOLUME_RANGE_SHIFT ||
            ucontrol->value.integer.value[0] > -1 + VOLUME_RANGE_SHIFT)
                return -EINVAL;
        if (ucontrol->value.integer.value[1] < -128 + VOLUME_RANGE_SHIFT ||
            ucontrol->value.integer.value[1] > -1 + VOLUME_RANGE_SHIFT)
                return -EINVAL;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
        onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);

        if (l + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[0] &&
            r + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[1]) {
                mutex_unlock(&onyx->mutex);
                return 0;
        }

        onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_LEFT,
                            ucontrol->value.integer.value[0]
                             - VOLUME_RANGE_SHIFT);
        onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT,
                            ucontrol->value.integer.value[1]
                             - VOLUME_RANGE_SHIFT);
        mutex_unlock(&onyx->mutex);

        return 1;
}

static struct snd_kcontrol_new volume_control = {
        .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
        .name = "Master Playback Volume",
        .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
        .info = onyx_snd_vol_info,
        .get = onyx_snd_vol_get,
        .put = onyx_snd_vol_put,
};

/* like above, this is necessary because a lot
 * of alsa mixer programs don't handle ranges
 * that don't start at 0 properly.
 * even alsamixer is one of them... */
#define INPUTGAIN_RANGE_SHIFT   (-3)

static int onyx_snd_inputgain_info(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_info *uinfo)
{
        uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
        uinfo->count = 1;
        uinfo->value.integer.min = 3 + INPUTGAIN_RANGE_SHIFT;
        uinfo->value.integer.max = 28 + INPUTGAIN_RANGE_SHIFT;
        return 0;
}

static int onyx_snd_inputgain_get(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 ig;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &ig);
        mutex_unlock(&onyx->mutex);

        ucontrol->value.integer.value[0] =
                (ig & ONYX_ADC_PGA_GAIN_MASK) + INPUTGAIN_RANGE_SHIFT;

        return 0;
}

static int onyx_snd_inputgain_put(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 v, n;

        if (ucontrol->value.integer.value[0] < 3 + INPUTGAIN_RANGE_SHIFT ||
            ucontrol->value.integer.value[0] > 28 + INPUTGAIN_RANGE_SHIFT)
                return -EINVAL;
        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
        n = v;
        n &= ~ONYX_ADC_PGA_GAIN_MASK;
        n |= (ucontrol->value.integer.value[0] - INPUTGAIN_RANGE_SHIFT)
                & ONYX_ADC_PGA_GAIN_MASK;
        onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, n);
        mutex_unlock(&onyx->mutex);

        return n != v;
}

static struct snd_kcontrol_new inputgain_control = {
        .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
        .name = "Master Capture Volume",
        .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
        .info = onyx_snd_inputgain_info,
        .get = onyx_snd_inputgain_get,
        .put = onyx_snd_inputgain_put,
};

static int onyx_snd_capture_source_info(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_info *uinfo)
{
        static const char * const texts[] = { "Line-In", "Microphone" };

        return snd_ctl_enum_info(uinfo, 1, 2, texts);
}

static int onyx_snd_capture_source_get(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        s8 v;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
        mutex_unlock(&onyx->mutex);

        ucontrol->value.enumerated.item[0] = !!(v&ONYX_ADC_INPUT_MIC);

        return 0;
}

static void onyx_set_capture_source(struct onyx *onyx, int mic)
{
        s8 v;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
        v &= ~ONYX_ADC_INPUT_MIC;
        if (mic)
                v |= ONYX_ADC_INPUT_MIC;
        onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, v);
        mutex_unlock(&onyx->mutex);
}

static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        if (ucontrol->value.enumerated.item[0] > 1)
                return -EINVAL;
        onyx_set_capture_source(snd_kcontrol_chip(kcontrol),
                                ucontrol->value.enumerated.item[0]);
        return 1;
}

static struct snd_kcontrol_new capture_source_control = {
        .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
        /* If we name this 'Input Source', it properly shows up in
         * alsamixer as a selection, * but it's shown under the
         * 'Playback' category.
         * If I name it 'Capture Source', it shows up in strange
         * ways (two bools of which one can be selected at a
         * time) but at least it's shown in the 'Capture'
         * category.
         * I was told that this was due to backward compatibility,
         * but I don't understand then why the mangling is *not*
         * done when I name it "Input Source".....
         */
        .name = "Capture Source",
        .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
        .info = onyx_snd_capture_source_info,
        .get = onyx_snd_capture_source_get,
        .put = onyx_snd_capture_source_put,
};

#define onyx_snd_mute_info      snd_ctl_boolean_stereo_info

static int onyx_snd_mute_get(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 c;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &c);
        mutex_unlock(&onyx->mutex);

        ucontrol->value.integer.value[0] = !(c & ONYX_MUTE_LEFT);
        ucontrol->value.integer.value[1] = !(c & ONYX_MUTE_RIGHT);

        return 0;
}

static int onyx_snd_mute_put(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 v = 0, c = 0;
        int err = -EBUSY;

        mutex_lock(&onyx->mutex);
        if (onyx->analog_locked)
                goto out_unlock;

        onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
        c = v;
        c &= ~(ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT);
        if (!ucontrol->value.integer.value[0])
                c |= ONYX_MUTE_LEFT;
        if (!ucontrol->value.integer.value[1])
                c |= ONYX_MUTE_RIGHT;
        err = onyx_write_register(onyx, ONYX_REG_DAC_CONTROL, c);

 out_unlock:
        mutex_unlock(&onyx->mutex);

        return !err ? (v != c) : err;
}

static struct snd_kcontrol_new mute_control = {
        .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
        .name = "Master Playback Switch",
        .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
        .info = onyx_snd_mute_info,
        .get = onyx_snd_mute_get,
        .put = onyx_snd_mute_put,
};


#define onyx_snd_single_bit_info        snd_ctl_boolean_mono_info

#define FLAG_POLARITY_INVERT    1
#define FLAG_SPDIFLOCK          2

static int onyx_snd_single_bit_get(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 c;
        long int pv = kcontrol->private_value;
        u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
        u8 address = (pv >> 8) & 0xff;
        u8 mask = pv & 0xff;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, address, &c);
        mutex_unlock(&onyx->mutex);

        ucontrol->value.integer.value[0] = !!(c & mask) ^ polarity;

        return 0;
}

static int onyx_snd_single_bit_put(struct snd_kcontrol *kcontrol,
        struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 v = 0, c = 0;
        int err;
        long int pv = kcontrol->private_value;
        u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
        u8 spdiflock = (pv >> 16) & FLAG_SPDIFLOCK;
        u8 address = (pv >> 8) & 0xff;
        u8 mask = pv & 0xff;

        mutex_lock(&onyx->mutex);
        if (spdiflock && onyx->spdif_locked) {
                /* even if alsamixer doesn't care.. */
                err = -EBUSY;
                goto out_unlock;
        }
        onyx_read_register(onyx, address, &v);
        c = v;
        c &= ~(mask);
        if (!!ucontrol->value.integer.value[0] ^ polarity)
                c |= mask;
        err = onyx_write_register(onyx, address, c);

 out_unlock:
        mutex_unlock(&onyx->mutex);

        return !err ? (v != c) : err;
}

#define SINGLE_BIT(n, type, description, address, mask, flags)          \
static struct snd_kcontrol_new n##_control = {                          \
        .iface = SNDRV_CTL_ELEM_IFACE_##type,                           \
        .name = description,                                            \
        .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,                      \
        .info = onyx_snd_single_bit_info,                               \
        .get = onyx_snd_single_bit_get,                                 \
        .put = onyx_snd_single_bit_put,                                 \
        .private_value = (flags << 16) | (address << 8) | mask          \
}

SINGLE_BIT(spdif,
           MIXER,
           SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
           ONYX_REG_DIG_INFO4,
           ONYX_SPDIF_ENABLE,
           FLAG_SPDIFLOCK);
SINGLE_BIT(ovr1,
           MIXER,
           "Oversampling Rate",
           ONYX_REG_DAC_CONTROL,
           ONYX_OVR1,
           0);
SINGLE_BIT(flt0,
           MIXER,
           "Fast Digital Filter Rolloff",
           ONYX_REG_DAC_FILTER,
           ONYX_ROLLOFF_FAST,
           FLAG_POLARITY_INVERT);
SINGLE_BIT(hpf,
           MIXER,
           "Highpass Filter",
           ONYX_REG_ADC_HPF_BYPASS,
           ONYX_HPF_DISABLE,
           FLAG_POLARITY_INVERT);
SINGLE_BIT(dm12,
           MIXER,
           "Digital De-Emphasis",
           ONYX_REG_DAC_DEEMPH,
           ONYX_DIGDEEMPH_CTRL,
           0);

static int onyx_spdif_info(struct snd_kcontrol *kcontrol,
                           struct snd_ctl_elem_info *uinfo)
{
        uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
        uinfo->count = 1;
        return 0;
}

static int onyx_spdif_mask_get(struct snd_kcontrol *kcontrol,
                               struct snd_ctl_elem_value *ucontrol)
{
        /* datasheet page 30, all others are 0 */
        ucontrol->value.iec958.status[0] = 0x3e;
        ucontrol->value.iec958.status[1] = 0xff;

        ucontrol->value.iec958.status[3] = 0x3f;
        ucontrol->value.iec958.status[4] = 0x0f;

        return 0;
}

static struct snd_kcontrol_new onyx_spdif_mask = {
        .access =       SNDRV_CTL_ELEM_ACCESS_READ,
        .iface =        SNDRV_CTL_ELEM_IFACE_PCM,
        .name =         SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
        .info =         onyx_spdif_info,
        .get =          onyx_spdif_mask_get,
};

static int onyx_spdif_get(struct snd_kcontrol *kcontrol,
                          struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 v;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
        ucontrol->value.iec958.status[0] = v & 0x3e;

        onyx_read_register(onyx, ONYX_REG_DIG_INFO2, &v);
        ucontrol->value.iec958.status[1] = v;

        onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
        ucontrol->value.iec958.status[3] = v & 0x3f;

        onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
        ucontrol->value.iec958.status[4] = v & 0x0f;
        mutex_unlock(&onyx->mutex);

        return 0;
}

static int onyx_spdif_put(struct snd_kcontrol *kcontrol,
                          struct snd_ctl_elem_value *ucontrol)
{
        struct onyx *onyx = snd_kcontrol_chip(kcontrol);
        u8 v;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
        v = (v & ~0x3e) | (ucontrol->value.iec958.status[0] & 0x3e);
        onyx_write_register(onyx, ONYX_REG_DIG_INFO1, v);

        v = ucontrol->value.iec958.status[1];
        onyx_write_register(onyx, ONYX_REG_DIG_INFO2, v);

        onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
        v = (v & ~0x3f) | (ucontrol->value.iec958.status[3] & 0x3f);
        onyx_write_register(onyx, ONYX_REG_DIG_INFO3, v);

        onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
        v = (v & ~0x0f) | (ucontrol->value.iec958.status[4] & 0x0f);
        onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
        mutex_unlock(&onyx->mutex);

        return 1;
}

static struct snd_kcontrol_new onyx_spdif_ctrl = {
        .access =       SNDRV_CTL_ELEM_ACCESS_READWRITE,
        .iface =        SNDRV_CTL_ELEM_IFACE_PCM,
        .name =         SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
        .info =         onyx_spdif_info,
        .get =          onyx_spdif_get,
        .put =          onyx_spdif_put,
};

/* our registers */

static u8 register_map[] = {
        ONYX_REG_DAC_ATTEN_LEFT,
        ONYX_REG_DAC_ATTEN_RIGHT,
        ONYX_REG_CONTROL,
        ONYX_REG_DAC_CONTROL,
        ONYX_REG_DAC_DEEMPH,
        ONYX_REG_DAC_FILTER,
        ONYX_REG_DAC_OUTPHASE,
        ONYX_REG_ADC_CONTROL,
        ONYX_REG_ADC_HPF_BYPASS,
        ONYX_REG_DIG_INFO1,
        ONYX_REG_DIG_INFO2,
        ONYX_REG_DIG_INFO3,
        ONYX_REG_DIG_INFO4
};

static u8 initial_values[ARRAY_SIZE(register_map)] = {
        0x80, 0x80, /* muted */
        ONYX_MRST | ONYX_SRST, /* but handled specially! */
        ONYX_MUTE_LEFT | ONYX_MUTE_RIGHT,
        0, /* no deemphasis */
        ONYX_DAC_FILTER_ALWAYS,
        ONYX_OUTPHASE_INVERTED,
        (-1 /*dB*/ + 8) & 0xF, /* line in selected, -1 dB gain*/
        ONYX_ADC_HPF_ALWAYS,
        (1<<2), /* pcm audio */
        2,      /* category: pcm coder */
        0,      /* sampling frequency 44.1 kHz, clock accuracy level II */
        1       /* 24 bit depth */
};

/* reset registers of chip, either to initial or to previous values */
static int onyx_register_init(struct onyx *onyx)
{
        int i;
        u8 val;
        u8 regs[sizeof(initial_values)];

        if (!onyx->initialised) {
                memcpy(regs, initial_values, sizeof(initial_values));
                if (onyx_read_register(onyx, ONYX_REG_CONTROL, &val))
                        return -1;
                val &= ~ONYX_SILICONVERSION;
                val |= initial_values[3];
                regs[3] = val;
        } else {
                for (i=0; i<sizeof(register_map); i++)
                        regs[i] = onyx->cache[register_map[i]-FIRSTREGISTER];
        }

        for (i=0; i<sizeof(register_map); i++) {
                if (onyx_write_register(onyx, register_map[i], regs[i]))
                        return -1;
        }
        onyx->initialised = 1;
        return 0;
}

static struct transfer_info onyx_transfers[] = {
        /* this is first so we can skip it if no input is present...
         * No hardware exists with that, but it's here as an example
         * of what to do :) */
        {
                /* analog input */
                .formats = SNDRV_PCM_FMTBIT_S8 |
                           SNDRV_PCM_FMTBIT_S16_BE |
                           SNDRV_PCM_FMTBIT_S24_BE,
                .rates = SNDRV_PCM_RATE_8000_96000,
                .transfer_in = 1,
                .must_be_clock_source = 0,
                .tag = 0,
        },
        {
                /* if analog and digital are currently off, anything should go,
                 * so this entry describes everything we can do... */
                .formats = SNDRV_PCM_FMTBIT_S8 |
                           SNDRV_PCM_FMTBIT_S16_BE |
                           SNDRV_PCM_FMTBIT_S24_BE
#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
                           | SNDRV_PCM_FMTBIT_COMPRESSED_16BE
#endif
                ,
                .rates = SNDRV_PCM_RATE_8000_96000,
                .tag = 0,
        },
        {
                /* analog output */
                .formats = SNDRV_PCM_FMTBIT_S8 |
                           SNDRV_PCM_FMTBIT_S16_BE |
                           SNDRV_PCM_FMTBIT_S24_BE,
                .rates = SNDRV_PCM_RATE_8000_96000,
                .transfer_in = 0,
                .must_be_clock_source = 0,
                .tag = 1,
        },
        {
                /* digital pcm output, also possible for analog out */
                .formats = SNDRV_PCM_FMTBIT_S8 |
                           SNDRV_PCM_FMTBIT_S16_BE |
                           SNDRV_PCM_FMTBIT_S24_BE,
                .rates = SNDRV_PCM_RATE_32000 |
                         SNDRV_PCM_RATE_44100 |
                         SNDRV_PCM_RATE_48000,
                .transfer_in = 0,
                .must_be_clock_source = 0,
                .tag = 2,
        },
#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
        /* Once alsa gets supports for this kind of thing we can add it... */
        {
                /* digital compressed output */
                .formats =  SNDRV_PCM_FMTBIT_COMPRESSED_16BE,
                .rates = SNDRV_PCM_RATE_32000 |
                         SNDRV_PCM_RATE_44100 |
                         SNDRV_PCM_RATE_48000,
                .tag = 2,
        },
#endif
        {}
};

static int onyx_usable(struct codec_info_item *cii,
                       struct transfer_info *ti,
                       struct transfer_info *out)
{
        u8 v;
        struct onyx *onyx = cii->codec_data;
        int spdif_enabled, analog_enabled;

        mutex_lock(&onyx->mutex);
        onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
        spdif_enabled = !!(v & ONYX_SPDIF_ENABLE);
        onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
        analog_enabled =
                (v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT))
                 != (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT);
        mutex_unlock(&onyx->mutex);

        switch (ti->tag) {
        case 0: return 1;
        case 1: return analog_enabled;
        case 2: return spdif_enabled;
        }
        return 1;
}

static int onyx_prepare(struct codec_info_item *cii,
                        struct bus_info *bi,
                        struct snd_pcm_substream *substream)
{
        u8 v;
        struct onyx *onyx = cii->codec_data;
        int err = -EBUSY;

        mutex_lock(&onyx->mutex);

#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
        if (substream->runtime->format == SNDRV_PCM_FMTBIT_COMPRESSED_16BE) {
                /* mute and lock analog output */
                onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
                if (onyx_write_register(onyx,
                                        ONYX_REG_DAC_CONTROL,
                                        v | ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT))
                        goto out_unlock;
                onyx->analog_locked = 1;
                err = 0;
                goto out_unlock;
        }
#endif
        switch (substream->runtime->rate) {
        case 32000:
        case 44100:
        case 48000:
                /* these rates are ok for all outputs */
                /* FIXME: program spdif channel control bits here so that
                 *        userspace doesn't have to if it only plays pcm! */
                err = 0;
                goto out_unlock;
        default:
                /* got some rate that the digital output can't do,
                 * so disable and lock it */
                onyx_read_register(cii->codec_data, ONYX_REG_DIG_INFO4, &v);
                if (onyx_write_register(onyx,
                                        ONYX_REG_DIG_INFO4,
                                        v & ~ONYX_SPDIF_ENABLE))
                        goto out_unlock;
                onyx->spdif_locked = 1;
                err = 0;
                goto out_unlock;
        }

 out_unlock:
        mutex_unlock(&onyx->mutex);

        return err;
}

static int onyx_open(struct codec_info_item *cii,
                     struct snd_pcm_substream *substream)
{
        struct onyx *onyx = cii->codec_data;

        mutex_lock(&onyx->mutex);
        onyx->open_count++;
        mutex_unlock(&onyx->mutex);

        return 0;
}

static int onyx_close(struct codec_info_item *cii,
                      struct snd_pcm_substream *substream)
{
        struct onyx *onyx = cii->codec_data;

        mutex_lock(&onyx->mutex);
        onyx->open_count--;
        if (!onyx->open_count)
                onyx->spdif_locked = onyx->analog_locked = 0;
        mutex_unlock(&onyx->mutex);

        return 0;
}

static int onyx_switch_clock(struct codec_info_item *cii,
                             enum clock_switch what)
{
        struct onyx *onyx = cii->codec_data;

        mutex_lock(&onyx->mutex);
        /* this *MUST* be more elaborate later... */
        switch (what) {
        case CLOCK_SWITCH_PREPARE_SLAVE:
                onyx->codec.gpio->methods->all_amps_off(onyx->codec.gpio);
                break;
        case CLOCK_SWITCH_SLAVE:
                onyx->codec.gpio->methods->all_amps_restore(onyx->codec.gpio);
                break;
        default: /* silence warning */
                break;
        }
        mutex_unlock(&onyx->mutex);

        return 0;
}

#ifdef CONFIG_PM

static int onyx_suspend(struct codec_info_item *cii, pm_message_t state)
{
        struct onyx *onyx = cii->codec_data;
        u8 v;
        int err = -ENXIO;

        mutex_lock(&onyx->mutex);
        if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
                goto out_unlock;
        onyx_write_register(onyx, ONYX_REG_CONTROL, v | ONYX_ADPSV | ONYX_DAPSV);
        /* Apple does a sleep here but the datasheet says to do it on resume */
        err = 0;
 out_unlock:
        mutex_unlock(&onyx->mutex);

        return err;
}

static int onyx_resume(struct codec_info_item *cii)
{
        struct onyx *onyx = cii->codec_data;
        u8 v;
        int err = -ENXIO;

        mutex_lock(&onyx->mutex);

        /* reset codec */
        onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
        msleep(1);
        onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1);
        msleep(1);
        onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
        msleep(1);

        /* take codec out of suspend (if it still is after reset) */
        if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
                goto out_unlock;
        onyx_write_register(onyx, ONYX_REG_CONTROL, v & ~(ONYX_ADPSV | ONYX_DAPSV));
        /* FIXME: should divide by sample rate, but 8k is the lowest we go */
        msleep(2205000/8000);
        /* reset all values */
        onyx_register_init(onyx);
        err = 0;
 out_unlock:
        mutex_unlock(&onyx->mutex);

        return err;
}

#endif /* CONFIG_PM */

static struct codec_info onyx_codec_info = {
        .transfers = onyx_transfers,
        .sysclock_factor = 256,
        .bus_factor = 64,
        .owner = THIS_MODULE,
        .usable = onyx_usable,
        .prepare = onyx_prepare,
        .open = onyx_open,
        .close = onyx_close,
        .switch_clock = onyx_switch_clock,
#ifdef CONFIG_PM
        .suspend = onyx_suspend,
        .resume = onyx_resume,
#endif
};

static int onyx_init_codec(struct aoa_codec *codec)
{
        struct onyx *onyx = codec_to_onyx(codec);
        struct snd_kcontrol *ctl;
        struct codec_info *ci = &onyx_codec_info;
        u8 v;
        int err;

        if (!onyx->codec.gpio || !onyx->codec.gpio->methods) {
                printk(KERN_ERR PFX "gpios not assigned!!\n");
                return -EINVAL;
        }

        onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
        msleep(1);
        onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1);
        msleep(1);
        onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
        msleep(1);

        if (onyx_register_init(onyx)) {
                printk(KERN_ERR PFX "failed to initialise onyx registers\n");
                return -ENODEV;
        }

        if (aoa_snd_device_new(SNDRV_DEV_CODEC, onyx, &ops)) {
                printk(KERN_ERR PFX "failed to create onyx snd device!\n");
                return -ENODEV;
        }

        /* nothing connected? what a joke! */
        if ((onyx->codec.connected & 0xF) == 0)
                return -ENOTCONN;

        /* if no inputs are present... */
        if ((onyx->codec.connected & 0xC) == 0) {
                if (!onyx->codec_info)
                        onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
                if (!onyx->codec_info)
                        return -ENOMEM;
                ci = onyx->codec_info;
                *ci = onyx_codec_info;
                ci->transfers++;
        }

        /* if no outputs are present... */
        if ((onyx->codec.connected & 3) == 0) {
                if (!onyx->codec_info)
                        onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
                if (!onyx->codec_info)
                        return -ENOMEM;
                ci = onyx->codec_info;
                /* this is fine as there have to be inputs
                 * if we end up in this part of the code */
                *ci = onyx_codec_info;
                ci->transfers[1].formats = 0;
        }

        if (onyx->codec.soundbus_dev->attach_codec(onyx->codec.soundbus_dev,
                                                   aoa_get_card(),
                                                   ci, onyx)) {
                printk(KERN_ERR PFX "error creating onyx pcm\n");
                return -ENODEV;
        }
#define ADDCTL(n)                                                       \
        do {                                                            \
                ctl = snd_ctl_new1(&n, onyx);                           \
                if (ctl) {                                              \
                        ctl->id.device =                                \
                                onyx->codec.soundbus_dev->pcm->device;  \
                        err = aoa_snd_ctl_add(ctl);                     \
                        if (err)                                        \
                                goto error;                             \
                }                                                       \
        } while (0)

        if (onyx->codec.soundbus_dev->pcm) {
                /* give the user appropriate controls
                 * depending on what inputs are connected */
                if ((onyx->codec.connected & 0xC) == 0xC)
                        ADDCTL(capture_source_control);
                else if (onyx->codec.connected & 4)
                        onyx_set_capture_source(onyx, 0);
                else
                        onyx_set_capture_source(onyx, 1);
                if (onyx->codec.connected & 0xC)
                        ADDCTL(inputgain_control);

                /* depending on what output is connected,
                 * give the user appropriate controls */
                if (onyx->codec.connected & 1) {
                        ADDCTL(volume_control);
                        ADDCTL(mute_control);
                        ADDCTL(ovr1_control);
                        ADDCTL(flt0_control);
                        ADDCTL(hpf_control);
                        ADDCTL(dm12_control);
                        /* spdif control defaults to off */
                }
                if (onyx->codec.connected & 2) {
                        ADDCTL(onyx_spdif_mask);
                        ADDCTL(onyx_spdif_ctrl);
                }
                if ((onyx->codec.connected & 3) == 3)
                        ADDCTL(spdif_control);
                /* if only S/PDIF is connected, enable it unconditionally */
                if ((onyx->codec.connected & 3) == 2) {
                        onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
                        v |= ONYX_SPDIF_ENABLE;
                        onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
                }
        }
#undef ADDCTL
        printk(KERN_INFO PFX "attached to onyx codec via i2c\n");

        return 0;
 error:
        onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
        snd_device_free(aoa_get_card(), onyx);
        return err;
}

static void onyx_exit_codec(struct aoa_codec *codec)
{
        struct onyx *onyx = codec_to_onyx(codec);

        if (!onyx->codec.soundbus_dev) {
                printk(KERN_ERR PFX "onyx_exit_codec called without soundbus_dev!\n");
                return;
        }
        onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
}

static int onyx_i2c_probe(struct i2c_client *client,
                          const struct i2c_device_id *id)
{
        struct device_node *node = client->dev.of_node;
        struct onyx *onyx;
        u8 dummy;

        onyx = kzalloc(sizeof(struct onyx), GFP_KERNEL);

        if (!onyx)
                return -ENOMEM;

        mutex_init(&onyx->mutex);
        onyx->i2c = client;
        i2c_set_clientdata(client, onyx);

        /* we try to read from register ONYX_REG_CONTROL
         * to check if the codec is present */
        if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
                printk(KERN_ERR PFX "failed to read control register\n");
                goto fail;
        }

        strlcpy(onyx->codec.name, "onyx", MAX_CODEC_NAME_LEN);
        onyx->codec.owner = THIS_MODULE;
        onyx->codec.init = onyx_init_codec;
        onyx->codec.exit = onyx_exit_codec;
        onyx->codec.node = of_node_get(node);

        if (aoa_codec_register(&onyx->codec)) {
                goto fail;
        }
        printk(KERN_DEBUG PFX "created and attached onyx instance\n");
        return 0;
 fail:
        kfree(onyx);
        return -ENODEV;
}

static int onyx_i2c_remove(struct i2c_client *client)
{
        struct onyx *onyx = i2c_get_clientdata(client);

        aoa_codec_unregister(&onyx->codec);
        of_node_put(onyx->codec.node);
        kfree(onyx->codec_info);
        kfree(onyx);
        return 0;
}

static const struct i2c_device_id onyx_i2c_id[] = {
        { "MAC,pcm3052", 0 },
        { }
};
MODULE_DEVICE_TABLE(i2c,onyx_i2c_id);

static struct i2c_driver onyx_driver = {
        .driver = {
                .name = "aoa_codec_onyx",
        },
        .probe = onyx_i2c_probe,
        .remove = onyx_i2c_remove,
        .id_table = onyx_i2c_id,
};

module_i2c_driver(onyx_driver);