/******************************************************************************
 *
 * Module Name: excreate - Named object creation
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2017, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"
#include "acinterp.h"
#include "amlcode.h"
#include "acnamesp.h"

#define _COMPONENT          ACPI_EXECUTER
ACPI_MODULE_NAME("excreate")
#ifndef ACPI_NO_METHOD_EXECUTION
/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_create_alias
 *
 * PARAMETERS:  walk_state           - Current state, contains operands
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new named alias
 *
 ******************************************************************************/
acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state)
{
        struct acpi_namespace_node *target_node;
        struct acpi_namespace_node *alias_node;
        acpi_status status = AE_OK;

        ACPI_FUNCTION_TRACE(ex_create_alias);

        /* Get the source/alias operands (both namespace nodes) */

        alias_node = (struct acpi_namespace_node *)walk_state->operands[0];
        target_node = (struct acpi_namespace_node *)walk_state->operands[1];

        if ((target_node->type == ACPI_TYPE_LOCAL_ALIAS) ||
            (target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
                /*
                 * Dereference an existing alias so that we don't create a chain
                 * of aliases. With this code, we guarantee that an alias is
                 * always exactly one level of indirection away from the
                 * actual aliased name.
                 */
                target_node =
                    ACPI_CAST_PTR(struct acpi_namespace_node,
                                  target_node->object);
        }

        /* Ensure that the target node is valid */

        if (!target_node) {
                return_ACPI_STATUS(AE_NULL_OBJECT);
        }

        /* Construct the alias object (a namespace node) */

        switch (target_node->type) {
        case ACPI_TYPE_METHOD:
                /*
                 * Control method aliases need to be differentiated with
                 * a special type
                 */
                alias_node->type = ACPI_TYPE_LOCAL_METHOD_ALIAS;
                break;

        default:
                /*
                 * All other object types.
                 *
                 * The new alias has the type ALIAS and points to the original
                 * NS node, not the object itself.
                 */
                alias_node->type = ACPI_TYPE_LOCAL_ALIAS;
                alias_node->object =
                    ACPI_CAST_PTR(union acpi_operand_object, target_node);
                break;
        }

        /* Since both operands are Nodes, we don't need to delete them */

        alias_node->object =
            ACPI_CAST_PTR(union acpi_operand_object, target_node);
        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_create_event
 *
 * PARAMETERS:  walk_state          - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new event object
 *
 ******************************************************************************/

acpi_status acpi_ex_create_event(struct acpi_walk_state *walk_state)
{
        acpi_status status;
        union acpi_operand_object *obj_desc;

        ACPI_FUNCTION_TRACE(ex_create_event);

        obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_EVENT);
        if (!obj_desc) {
                status = AE_NO_MEMORY;
                goto cleanup;
        }

        /*
         * Create the actual OS semaphore, with zero initial units -- meaning
         * that the event is created in an unsignalled state
         */
        status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0,
                                          &obj_desc->event.os_semaphore);
        if (ACPI_FAILURE(status)) {
                goto cleanup;
        }

        /* Attach object to the Node */

        status = acpi_ns_attach_object((struct acpi_namespace_node *)
                                       walk_state->operands[0], obj_desc,
                                       ACPI_TYPE_EVENT);

cleanup:
        /*
         * Remove local reference to the object (on error, will cause deletion
         * of both object and semaphore if present.)
         */
        acpi_ut_remove_reference(obj_desc);
        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_create_mutex
 *
 * PARAMETERS:  walk_state          - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new mutex object
 *
 *              Mutex (Name[0], sync_level[1])
 *
 ******************************************************************************/

acpi_status acpi_ex_create_mutex(struct acpi_walk_state *walk_state)
{
        acpi_status status = AE_OK;
        union acpi_operand_object *obj_desc;

        ACPI_FUNCTION_TRACE_PTR(ex_create_mutex, ACPI_WALK_OPERANDS);

        /* Create the new mutex object */

        obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_MUTEX);
        if (!obj_desc) {
                status = AE_NO_MEMORY;
                goto cleanup;
        }

        /* Create the actual OS Mutex */

        status = acpi_os_create_mutex(&obj_desc->mutex.os_mutex);
        if (ACPI_FAILURE(status)) {
                goto cleanup;
        }

        /* Init object and attach to NS node */

        obj_desc->mutex.sync_level = (u8)walk_state->operands[1]->integer.value;
        obj_desc->mutex.node =
            (struct acpi_namespace_node *)walk_state->operands[0];

        status =
            acpi_ns_attach_object(obj_desc->mutex.node, obj_desc,
                                  ACPI_TYPE_MUTEX);

cleanup:
        /*
         * Remove local reference to the object (on error, will cause deletion
         * of both object and semaphore if present.)
         */
        acpi_ut_remove_reference(obj_desc);
        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_create_region
 *
 * PARAMETERS:  aml_start           - Pointer to the region declaration AML
 *              aml_length          - Max length of the declaration AML
 *              space_id            - Address space ID for the region
 *              walk_state          - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new operation region object
 *
 ******************************************************************************/

acpi_status
acpi_ex_create_region(u8 * aml_start,
                      u32 aml_length,
                      u8 space_id, struct acpi_walk_state *walk_state)
{
        acpi_status status;
        union acpi_operand_object *obj_desc;
        struct acpi_namespace_node *node;
        union acpi_operand_object *region_obj2;

        ACPI_FUNCTION_TRACE(ex_create_region);

        /* Get the Namespace Node */

        node = walk_state->op->common.node;

        /*
         * If the region object is already attached to this node,
         * just return
         */
        if (acpi_ns_get_attached_object(node)) {
                return_ACPI_STATUS(AE_OK);
        }

        /*
         * Space ID must be one of the predefined IDs, or in the user-defined
         * range
         */
        if (!acpi_is_valid_space_id(space_id)) {
                /*
                 * Print an error message, but continue. We don't want to abort
                 * a table load for this exception. Instead, if the region is
                 * actually used at runtime, abort the executing method.
                 */
                ACPI_ERROR((AE_INFO,
                            "Invalid/unknown Address Space ID: 0x%2.2X",
                            space_id));
        }

        ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Region Type - %s (0x%X)\n",
                          acpi_ut_get_region_name(space_id), space_id));

        /* Create the region descriptor */

        obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION);
        if (!obj_desc) {
                status = AE_NO_MEMORY;
                goto cleanup;
        }

        /*
         * Remember location in AML stream of address & length
         * operands since they need to be evaluated at run time.
         */
        region_obj2 = acpi_ns_get_secondary_object(obj_desc);
        region_obj2->extra.aml_start = aml_start;
        region_obj2->extra.aml_length = aml_length;
        region_obj2->extra.method_REG = NULL;
        if (walk_state->scope_info) {
                region_obj2->extra.scope_node =
                    walk_state->scope_info->scope.node;
        } else {
                region_obj2->extra.scope_node = node;
        }

        /* Init the region from the operands */

        obj_desc->region.space_id = space_id;
        obj_desc->region.address = 0;
        obj_desc->region.length = 0;
        obj_desc->region.node = node;
        obj_desc->region.handler = NULL;
        obj_desc->common.flags &=
            ~(AOPOBJ_SETUP_COMPLETE | AOPOBJ_REG_CONNECTED |
              AOPOBJ_OBJECT_INITIALIZED);

        /* Install the new region object in the parent Node */

        status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_REGION);

cleanup:

        /* Remove local reference to the object */

        acpi_ut_remove_reference(obj_desc);
        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_create_processor
 *
 * PARAMETERS:  walk_state          - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new processor object and populate the fields
 *
 *              Processor (Name[0], cpu_ID[1], pblock_addr[2], pblock_length[3])
 *
 ******************************************************************************/

acpi_status acpi_ex_create_processor(struct acpi_walk_state *walk_state)
{
        union acpi_operand_object **operand = &walk_state->operands[0];
        union acpi_operand_object *obj_desc;
        acpi_status status;

        ACPI_FUNCTION_TRACE_PTR(ex_create_processor, walk_state);

        /* Create the processor object */

        obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PROCESSOR);
        if (!obj_desc) {
                return_ACPI_STATUS(AE_NO_MEMORY);
        }

        /* Initialize the processor object from the operands */

        obj_desc->processor.proc_id = (u8) operand[1]->integer.value;
        obj_desc->processor.length = (u8) operand[3]->integer.value;
        obj_desc->processor.address =
            (acpi_io_address)operand[2]->integer.value;

        /* Install the processor object in the parent Node */

        status = acpi_ns_attach_object((struct acpi_namespace_node *)operand[0],
                                       obj_desc, ACPI_TYPE_PROCESSOR);

        /* Remove local reference to the object */

        acpi_ut_remove_reference(obj_desc);
        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_create_power_resource
 *
 * PARAMETERS:  walk_state          - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new power_resource object and populate the fields
 *
 *              power_resource (Name[0], system_level[1], resource_order[2])
 *
 ******************************************************************************/

acpi_status acpi_ex_create_power_resource(struct acpi_walk_state *walk_state)
{
        union acpi_operand_object **operand = &walk_state->operands[0];
        acpi_status status;
        union acpi_operand_object *obj_desc;

        ACPI_FUNCTION_TRACE_PTR(ex_create_power_resource, walk_state);

        /* Create the power resource object */

        obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_POWER);
        if (!obj_desc) {
                return_ACPI_STATUS(AE_NO_MEMORY);
        }

        /* Initialize the power object from the operands */

        obj_desc->power_resource.system_level = (u8) operand[1]->integer.value;
        obj_desc->power_resource.resource_order =
            (u16) operand[2]->integer.value;

        /* Install the  power resource object in the parent Node */

        status = acpi_ns_attach_object((struct acpi_namespace_node *)operand[0],
                                       obj_desc, ACPI_TYPE_POWER);

        /* Remove local reference to the object */

        acpi_ut_remove_reference(obj_desc);
        return_ACPI_STATUS(status);
}
#endif

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_create_method
 *
 * PARAMETERS:  aml_start       - First byte of the method's AML
 *              aml_length      - AML byte count for this method
 *              walk_state      - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new method object
 *
 ******************************************************************************/

acpi_status
acpi_ex_create_method(u8 * aml_start,
                      u32 aml_length, struct acpi_walk_state *walk_state)
{
        union acpi_operand_object **operand = &walk_state->operands[0];
        union acpi_operand_object *obj_desc;
        acpi_status status;
        u8 method_flags;

        ACPI_FUNCTION_TRACE_PTR(ex_create_method, walk_state);

        /* Create a new method object */

        obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
        if (!obj_desc) {
                status = AE_NO_MEMORY;
                goto exit;
        }

        /* Save the method's AML pointer and length  */

        obj_desc->method.aml_start = aml_start;
        obj_desc->method.aml_length = aml_length;
        obj_desc->method.node = operand[0];

        /*
         * Disassemble the method flags. Split off the arg_count, Serialized
         * flag, and sync_level for efficiency.
         */
        method_flags = (u8)operand[1]->integer.value;
        obj_desc->method.param_count = (u8)
            (method_flags & AML_METHOD_ARG_COUNT);

        /*
         * Get the sync_level. If method is serialized, a mutex will be
         * created for this method when it is parsed.
         */
        if (method_flags & AML_METHOD_SERIALIZED) {
                obj_desc->method.info_flags = ACPI_METHOD_SERIALIZED;

                /*
                 * ACPI 1.0: sync_level = 0
                 * ACPI 2.0: sync_level = sync_level in method declaration
                 */
                obj_desc->method.sync_level = (u8)
                    ((method_flags & AML_METHOD_SYNC_LEVEL) >> 4);
        }

        /* Attach the new object to the method Node */

        status = acpi_ns_attach_object((struct acpi_namespace_node *)operand[0],
                                       obj_desc, ACPI_TYPE_METHOD);

        /* Remove local reference to the object */

        acpi_ut_remove_reference(obj_desc);

exit:
        /* Remove a reference to the operand */

        acpi_ut_remove_reference(operand[1]);
        return_ACPI_STATUS(status);
}