linux/drivers/acpi/acpica/uttrack.c
<<
>>
Prefs
   1/******************************************************************************
   2 *
   3 * Module Name: uttrack - Memory allocation tracking routines (debug only)
   4 *
   5 *****************************************************************************/
   6
   7/*
   8 * Copyright (C) 2000 - 2017, Intel Corp.
   9 * All rights reserved.
  10 *
  11 * Redistribution and use in source and binary forms, with or without
  12 * modification, are permitted provided that the following conditions
  13 * are met:
  14 * 1. Redistributions of source code must retain the above copyright
  15 *    notice, this list of conditions, and the following disclaimer,
  16 *    without modification.
  17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18 *    substantially similar to the "NO WARRANTY" disclaimer below
  19 *    ("Disclaimer") and any redistribution must be conditioned upon
  20 *    including a substantially similar Disclaimer requirement for further
  21 *    binary redistribution.
  22 * 3. Neither the names of the above-listed copyright holders nor the names
  23 *    of any contributors may be used to endorse or promote products derived
  24 *    from this software without specific prior written permission.
  25 *
  26 * Alternatively, this software may be distributed under the terms of the
  27 * GNU General Public License ("GPL") version 2 as published by the Free
  28 * Software Foundation.
  29 *
  30 * NO WARRANTY
  31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41 * POSSIBILITY OF SUCH DAMAGES.
  42 */
  43
  44/*
  45 * These procedures are used for tracking memory leaks in the subsystem, and
  46 * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
  47 *
  48 * Each memory allocation is tracked via a doubly linked list. Each
  49 * element contains the caller's component, module name, function name, and
  50 * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
  51 * acpi_ut_track_allocation to add an element to the list; deletion
  52 * occurs in the body of acpi_ut_free.
  53 */
  54
  55#include <acpi/acpi.h>
  56#include "accommon.h"
  57
  58#ifdef ACPI_DBG_TRACK_ALLOCATIONS
  59
  60#define _COMPONENT          ACPI_UTILITIES
  61ACPI_MODULE_NAME("uttrack")
  62
  63/* Local prototypes */
  64static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
  65                                                            acpi_debug_mem_block
  66                                                            *allocation);
  67
  68static acpi_status
  69acpi_ut_track_allocation(struct acpi_debug_mem_block *address,
  70                         acpi_size size,
  71                         u8 alloc_type,
  72                         u32 component, const char *module, u32 line);
  73
  74static acpi_status
  75acpi_ut_remove_allocation(struct acpi_debug_mem_block *address,
  76                          u32 component, const char *module, u32 line);
  77
  78/*******************************************************************************
  79 *
  80 * FUNCTION:    acpi_ut_create_list
  81 *
  82 * PARAMETERS:  cache_name      - Ascii name for the cache
  83 *              object_size     - Size of each cached object
  84 *              return_cache    - Where the new cache object is returned
  85 *
  86 * RETURN:      Status
  87 *
  88 * DESCRIPTION: Create a local memory list for tracking purposed
  89 *
  90 ******************************************************************************/
  91
  92acpi_status
  93acpi_ut_create_list(const char *list_name,
  94                    u16 object_size, struct acpi_memory_list **return_cache)
  95{
  96        struct acpi_memory_list *cache;
  97
  98        cache = acpi_os_allocate_zeroed(sizeof(struct acpi_memory_list));
  99        if (!cache) {
 100                return (AE_NO_MEMORY);
 101        }
 102
 103        cache->list_name = list_name;
 104        cache->object_size = object_size;
 105
 106        *return_cache = cache;
 107        return (AE_OK);
 108}
 109
 110/*******************************************************************************
 111 *
 112 * FUNCTION:    acpi_ut_allocate_and_track
 113 *
 114 * PARAMETERS:  size                - Size of the allocation
 115 *              component           - Component type of caller
 116 *              module              - Source file name of caller
 117 *              line                - Line number of caller
 118 *
 119 * RETURN:      Address of the allocated memory on success, NULL on failure.
 120 *
 121 * DESCRIPTION: The subsystem's equivalent of malloc.
 122 *
 123 ******************************************************************************/
 124
 125void *acpi_ut_allocate_and_track(acpi_size size,
 126                                 u32 component, const char *module, u32 line)
 127{
 128        struct acpi_debug_mem_block *allocation;
 129        acpi_status status;
 130
 131        /* Check for an inadvertent size of zero bytes */
 132
 133        if (!size) {
 134                ACPI_WARNING((module, line,
 135                              "Attempt to allocate zero bytes, allocating 1 byte"));
 136                size = 1;
 137        }
 138
 139        allocation =
 140            acpi_os_allocate(size + sizeof(struct acpi_debug_mem_header));
 141        if (!allocation) {
 142
 143                /* Report allocation error */
 144
 145                ACPI_WARNING((module, line,
 146                              "Could not allocate size %u", (u32)size));
 147
 148                return (NULL);
 149        }
 150
 151        status =
 152            acpi_ut_track_allocation(allocation, size, ACPI_MEM_MALLOC,
 153                                     component, module, line);
 154        if (ACPI_FAILURE(status)) {
 155                acpi_os_free(allocation);
 156                return (NULL);
 157        }
 158
 159        acpi_gbl_global_list->total_allocated++;
 160        acpi_gbl_global_list->total_size += (u32)size;
 161        acpi_gbl_global_list->current_total_size += (u32)size;
 162
 163        if (acpi_gbl_global_list->current_total_size >
 164            acpi_gbl_global_list->max_occupied) {
 165                acpi_gbl_global_list->max_occupied =
 166                    acpi_gbl_global_list->current_total_size;
 167        }
 168
 169        return ((void *)&allocation->user_space);
 170}
 171
 172/*******************************************************************************
 173 *
 174 * FUNCTION:    acpi_ut_allocate_zeroed_and_track
 175 *
 176 * PARAMETERS:  size                - Size of the allocation
 177 *              component           - Component type of caller
 178 *              module              - Source file name of caller
 179 *              line                - Line number of caller
 180 *
 181 * RETURN:      Address of the allocated memory on success, NULL on failure.
 182 *
 183 * DESCRIPTION: Subsystem equivalent of calloc.
 184 *
 185 ******************************************************************************/
 186
 187void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
 188                                        u32 component,
 189                                        const char *module, u32 line)
 190{
 191        struct acpi_debug_mem_block *allocation;
 192        acpi_status status;
 193
 194        /* Check for an inadvertent size of zero bytes */
 195
 196        if (!size) {
 197                ACPI_WARNING((module, line,
 198                              "Attempt to allocate zero bytes, allocating 1 byte"));
 199                size = 1;
 200        }
 201
 202        allocation =
 203            acpi_os_allocate_zeroed(size +
 204                                    sizeof(struct acpi_debug_mem_header));
 205        if (!allocation) {
 206
 207                /* Report allocation error */
 208
 209                ACPI_ERROR((module, line,
 210                            "Could not allocate size %u", (u32)size));
 211                return (NULL);
 212        }
 213
 214        status = acpi_ut_track_allocation(allocation, size,
 215                                          ACPI_MEM_CALLOC, component, module,
 216                                          line);
 217        if (ACPI_FAILURE(status)) {
 218                acpi_os_free(allocation);
 219                return (NULL);
 220        }
 221
 222        acpi_gbl_global_list->total_allocated++;
 223        acpi_gbl_global_list->total_size += (u32)size;
 224        acpi_gbl_global_list->current_total_size += (u32)size;
 225
 226        if (acpi_gbl_global_list->current_total_size >
 227            acpi_gbl_global_list->max_occupied) {
 228                acpi_gbl_global_list->max_occupied =
 229                    acpi_gbl_global_list->current_total_size;
 230        }
 231
 232        return ((void *)&allocation->user_space);
 233}
 234
 235/*******************************************************************************
 236 *
 237 * FUNCTION:    acpi_ut_free_and_track
 238 *
 239 * PARAMETERS:  allocation          - Address of the memory to deallocate
 240 *              component           - Component type of caller
 241 *              module              - Source file name of caller
 242 *              line                - Line number of caller
 243 *
 244 * RETURN:      None
 245 *
 246 * DESCRIPTION: Frees the memory at Allocation
 247 *
 248 ******************************************************************************/
 249
 250void
 251acpi_ut_free_and_track(void *allocation,
 252                       u32 component, const char *module, u32 line)
 253{
 254        struct acpi_debug_mem_block *debug_block;
 255        acpi_status status;
 256
 257        ACPI_FUNCTION_TRACE_PTR(ut_free, allocation);
 258
 259        if (NULL == allocation) {
 260                ACPI_ERROR((module, line, "Attempt to delete a NULL address"));
 261
 262                return_VOID;
 263        }
 264
 265        debug_block = ACPI_CAST_PTR(struct acpi_debug_mem_block,
 266                                    (((char *)allocation) -
 267                                     sizeof(struct acpi_debug_mem_header)));
 268
 269        acpi_gbl_global_list->total_freed++;
 270        acpi_gbl_global_list->current_total_size -= debug_block->size;
 271
 272        status =
 273            acpi_ut_remove_allocation(debug_block, component, module, line);
 274        if (ACPI_FAILURE(status)) {
 275                ACPI_EXCEPTION((AE_INFO, status, "Could not free memory"));
 276        }
 277
 278        acpi_os_free(debug_block);
 279        ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p freed (block %p)\n",
 280                          allocation, debug_block));
 281        return_VOID;
 282}
 283
 284/*******************************************************************************
 285 *
 286 * FUNCTION:    acpi_ut_find_allocation
 287 *
 288 * PARAMETERS:  allocation              - Address of allocated memory
 289 *
 290 * RETURN:      Three cases:
 291 *              1) List is empty, NULL is returned.
 292 *              2) Element was found. Returns Allocation parameter.
 293 *              3) Element was not found. Returns position where it should be
 294 *                  inserted into the list.
 295 *
 296 * DESCRIPTION: Searches for an element in the global allocation tracking list.
 297 *              If the element is not found, returns the location within the
 298 *              list where the element should be inserted.
 299 *
 300 *              Note: The list is ordered by larger-to-smaller addresses.
 301 *
 302 *              This global list is used to detect memory leaks in ACPICA as
 303 *              well as other issues such as an attempt to release the same
 304 *              internal object more than once. Although expensive as far
 305 *              as cpu time, this list is much more helpful for finding these
 306 *              types of issues than using memory leak detectors outside of
 307 *              the ACPICA code.
 308 *
 309 ******************************************************************************/
 310
 311static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
 312                                                            acpi_debug_mem_block
 313                                                            *allocation)
 314{
 315        struct acpi_debug_mem_block *element;
 316
 317        element = acpi_gbl_global_list->list_head;
 318        if (!element) {
 319                return (NULL);
 320        }
 321
 322        /*
 323         * Search for the address.
 324         *
 325         * Note: List is ordered by larger-to-smaller addresses, on the
 326         * assumption that a new allocation usually has a larger address
 327         * than previous allocations.
 328         */
 329        while (element > allocation) {
 330
 331                /* Check for end-of-list */
 332
 333                if (!element->next) {
 334                        return (element);
 335                }
 336
 337                element = element->next;
 338        }
 339
 340        if (element == allocation) {
 341                return (element);
 342        }
 343
 344        return (element->previous);
 345}
 346
 347/*******************************************************************************
 348 *
 349 * FUNCTION:    acpi_ut_track_allocation
 350 *
 351 * PARAMETERS:  allocation          - Address of allocated memory
 352 *              size                - Size of the allocation
 353 *              alloc_type          - MEM_MALLOC or MEM_CALLOC
 354 *              component           - Component type of caller
 355 *              module              - Source file name of caller
 356 *              line                - Line number of caller
 357 *
 358 * RETURN:      Status
 359 *
 360 * DESCRIPTION: Inserts an element into the global allocation tracking list.
 361 *
 362 ******************************************************************************/
 363
 364static acpi_status
 365acpi_ut_track_allocation(struct acpi_debug_mem_block *allocation,
 366                         acpi_size size,
 367                         u8 alloc_type,
 368                         u32 component, const char *module, u32 line)
 369{
 370        struct acpi_memory_list *mem_list;
 371        struct acpi_debug_mem_block *element;
 372        acpi_status status = AE_OK;
 373
 374        ACPI_FUNCTION_TRACE_PTR(ut_track_allocation, allocation);
 375
 376        if (acpi_gbl_disable_mem_tracking) {
 377                return_ACPI_STATUS(AE_OK);
 378        }
 379
 380        mem_list = acpi_gbl_global_list;
 381        status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
 382        if (ACPI_FAILURE(status)) {
 383                return_ACPI_STATUS(status);
 384        }
 385
 386        /*
 387         * Search the global list for this address to make sure it is not
 388         * already present. This will catch several kinds of problems.
 389         */
 390        element = acpi_ut_find_allocation(allocation);
 391        if (element == allocation) {
 392                ACPI_ERROR((AE_INFO,
 393                            "UtTrackAllocation: Allocation (%p) already present in global list!",
 394                            allocation));
 395                goto unlock_and_exit;
 396        }
 397
 398        /* Fill in the instance data */
 399
 400        allocation->size = (u32)size;
 401        allocation->alloc_type = alloc_type;
 402        allocation->component = component;
 403        allocation->line = line;
 404
 405        strncpy(allocation->module, module, ACPI_MAX_MODULE_NAME);
 406        allocation->module[ACPI_MAX_MODULE_NAME - 1] = 0;
 407
 408        if (!element) {
 409
 410                /* Insert at list head */
 411
 412                if (mem_list->list_head) {
 413                        ((struct acpi_debug_mem_block *)(mem_list->list_head))->
 414                            previous = allocation;
 415                }
 416
 417                allocation->next = mem_list->list_head;
 418                allocation->previous = NULL;
 419
 420                mem_list->list_head = allocation;
 421        } else {
 422                /* Insert after element */
 423
 424                allocation->next = element->next;
 425                allocation->previous = element;
 426
 427                if (element->next) {
 428                        (element->next)->previous = allocation;
 429                }
 430
 431                element->next = allocation;
 432        }
 433
 434unlock_and_exit:
 435        status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
 436        return_ACPI_STATUS(status);
 437}
 438
 439/*******************************************************************************
 440 *
 441 * FUNCTION:    acpi_ut_remove_allocation
 442 *
 443 * PARAMETERS:  allocation          - Address of allocated memory
 444 *              component           - Component type of caller
 445 *              module              - Source file name of caller
 446 *              line                - Line number of caller
 447 *
 448 * RETURN:      Status
 449 *
 450 * DESCRIPTION: Deletes an element from the global allocation tracking list.
 451 *
 452 ******************************************************************************/
 453
 454static acpi_status
 455acpi_ut_remove_allocation(struct acpi_debug_mem_block *allocation,
 456                          u32 component, const char *module, u32 line)
 457{
 458        struct acpi_memory_list *mem_list;
 459        acpi_status status;
 460
 461        ACPI_FUNCTION_NAME(ut_remove_allocation);
 462
 463        if (acpi_gbl_disable_mem_tracking) {
 464                return (AE_OK);
 465        }
 466
 467        mem_list = acpi_gbl_global_list;
 468        if (NULL == mem_list->list_head) {
 469
 470                /* No allocations! */
 471
 472                ACPI_ERROR((module, line,
 473                            "Empty allocation list, nothing to free!"));
 474
 475                return (AE_OK);
 476        }
 477
 478        status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
 479        if (ACPI_FAILURE(status)) {
 480                return (status);
 481        }
 482
 483        /* Unlink */
 484
 485        if (allocation->previous) {
 486                (allocation->previous)->next = allocation->next;
 487        } else {
 488                mem_list->list_head = allocation->next;
 489        }
 490
 491        if (allocation->next) {
 492                (allocation->next)->previous = allocation->previous;
 493        }
 494
 495        ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing %p, size 0%X\n",
 496                          &allocation->user_space, allocation->size));
 497
 498        /* Mark the segment as deleted */
 499
 500        memset(&allocation->user_space, 0xEA, allocation->size);
 501
 502        status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
 503        return (status);
 504}
 505
 506/*******************************************************************************
 507 *
 508 * FUNCTION:    acpi_ut_dump_allocation_info
 509 *
 510 * PARAMETERS:  None
 511 *
 512 * RETURN:      None
 513 *
 514 * DESCRIPTION: Print some info about the outstanding allocations.
 515 *
 516 ******************************************************************************/
 517
 518void acpi_ut_dump_allocation_info(void)
 519{
 520/*
 521        struct acpi_memory_list         *mem_list;
 522*/
 523
 524        ACPI_FUNCTION_TRACE(ut_dump_allocation_info);
 525
 526/*
 527        ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 528                ("%30s: %4d (%3d Kb)\n", "Current allocations",
 529                mem_list->current_count,
 530                ROUND_UP_TO_1K (mem_list->current_size)));
 531
 532        ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 533                ("%30s: %4d (%3d Kb)\n", "Max concurrent allocations",
 534                mem_list->max_concurrent_count,
 535                ROUND_UP_TO_1K (mem_list->max_concurrent_size)));
 536
 537        ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 538                ("%30s: %4d (%3d Kb)\n", "Total (all) internal objects",
 539                running_object_count,
 540                ROUND_UP_TO_1K (running_object_size)));
 541
 542        ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 543                ("%30s: %4d (%3d Kb)\n", "Total (all) allocations",
 544                running_alloc_count,
 545                ROUND_UP_TO_1K (running_alloc_size)));
 546
 547        ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 548                ("%30s: %4d (%3d Kb)\n", "Current Nodes",
 549                acpi_gbl_current_node_count,
 550                ROUND_UP_TO_1K (acpi_gbl_current_node_size)));
 551
 552        ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
 553                ("%30s: %4d (%3d Kb)\n", "Max Nodes",
 554                acpi_gbl_max_concurrent_node_count,
 555                ROUND_UP_TO_1K ((acpi_gbl_max_concurrent_node_count *
 556                        sizeof (struct acpi_namespace_node)))));
 557*/
 558        return_VOID;
 559}
 560
 561/*******************************************************************************
 562 *
 563 * FUNCTION:    acpi_ut_dump_allocations
 564 *
 565 * PARAMETERS:  component           - Component(s) to dump info for.
 566 *              module              - Module to dump info for. NULL means all.
 567 *
 568 * RETURN:      None
 569 *
 570 * DESCRIPTION: Print a list of all outstanding allocations.
 571 *
 572 ******************************************************************************/
 573
 574void acpi_ut_dump_allocations(u32 component, const char *module)
 575{
 576        struct acpi_debug_mem_block *element;
 577        union acpi_descriptor *descriptor;
 578        u32 num_outstanding = 0;
 579        u8 descriptor_type;
 580
 581        ACPI_FUNCTION_TRACE(ut_dump_allocations);
 582
 583        if (acpi_gbl_disable_mem_tracking) {
 584                return_VOID;
 585        }
 586
 587        /*
 588         * Walk the allocation list.
 589         */
 590        if (ACPI_FAILURE(acpi_ut_acquire_mutex(ACPI_MTX_MEMORY))) {
 591                return_VOID;
 592        }
 593
 594        if (!acpi_gbl_global_list) {
 595                goto exit;
 596        }
 597
 598        element = acpi_gbl_global_list->list_head;
 599        while (element) {
 600                if ((element->component & component) &&
 601                    ((module == NULL)
 602                     || (0 == strcmp(module, element->module)))) {
 603                        descriptor =
 604                            ACPI_CAST_PTR(union acpi_descriptor,
 605                                          &element->user_space);
 606
 607                        if (element->size <
 608                            sizeof(struct acpi_common_descriptor)) {
 609                                acpi_os_printf("%p Length 0x%04X %9.9s-%4.4u "
 610                                               "[Not a Descriptor - too small]\n",
 611                                               descriptor, element->size,
 612                                               element->module, element->line);
 613                        } else {
 614                                /* Ignore allocated objects that are in a cache */
 615
 616                                if (ACPI_GET_DESCRIPTOR_TYPE(descriptor) !=
 617                                    ACPI_DESC_TYPE_CACHED) {
 618                                        acpi_os_printf
 619                                            ("%p Length 0x%04X %9.9s-%4.4u [%s] ",
 620                                             descriptor, element->size,
 621                                             element->module, element->line,
 622                                             acpi_ut_get_descriptor_name
 623                                             (descriptor));
 624
 625                                        /* Validate the descriptor type using Type field and length */
 626
 627                                        descriptor_type = 0;    /* Not a valid descriptor type */
 628
 629                                        switch (ACPI_GET_DESCRIPTOR_TYPE
 630                                                (descriptor)) {
 631                                        case ACPI_DESC_TYPE_OPERAND:
 632
 633                                                if (element->size ==
 634                                                    sizeof(union
 635                                                           acpi_operand_object))
 636                                                {
 637                                                        descriptor_type =
 638                                                            ACPI_DESC_TYPE_OPERAND;
 639                                                }
 640                                                break;
 641
 642                                        case ACPI_DESC_TYPE_PARSER:
 643
 644                                                if (element->size ==
 645                                                    sizeof(union
 646                                                           acpi_parse_object)) {
 647                                                        descriptor_type =
 648                                                            ACPI_DESC_TYPE_PARSER;
 649                                                }
 650                                                break;
 651
 652                                        case ACPI_DESC_TYPE_NAMED:
 653
 654                                                if (element->size ==
 655                                                    sizeof(struct
 656                                                           acpi_namespace_node))
 657                                                {
 658                                                        descriptor_type =
 659                                                            ACPI_DESC_TYPE_NAMED;
 660                                                }
 661                                                break;
 662
 663                                        default:
 664
 665                                                break;
 666                                        }
 667
 668                                        /* Display additional info for the major descriptor types */
 669
 670                                        switch (descriptor_type) {
 671                                        case ACPI_DESC_TYPE_OPERAND:
 672
 673                                                acpi_os_printf
 674                                                    ("%12.12s RefCount 0x%04X\n",
 675                                                     acpi_ut_get_type_name
 676                                                     (descriptor->object.common.
 677                                                      type),
 678                                                     descriptor->object.common.
 679                                                     reference_count);
 680                                                break;
 681
 682                                        case ACPI_DESC_TYPE_PARSER:
 683
 684                                                acpi_os_printf
 685                                                    ("AmlOpcode 0x%04hX\n",
 686                                                     descriptor->op.asl.
 687                                                     aml_opcode);
 688                                                break;
 689
 690                                        case ACPI_DESC_TYPE_NAMED:
 691
 692                                                acpi_os_printf("%4.4s\n",
 693                                                               acpi_ut_get_node_name
 694                                                               (&descriptor->
 695                                                                node));
 696                                                break;
 697
 698                                        default:
 699
 700                                                acpi_os_printf("\n");
 701                                                break;
 702                                        }
 703                                }
 704                        }
 705
 706                        num_outstanding++;
 707                }
 708
 709                element = element->next;
 710        }
 711
 712exit:
 713        (void)acpi_ut_release_mutex(ACPI_MTX_MEMORY);
 714
 715        /* Print summary */
 716
 717        if (!num_outstanding) {
 718                ACPI_INFO(("No outstanding allocations"));
 719        } else {
 720                ACPI_ERROR((AE_INFO, "%u(0x%X) Outstanding allocations",
 721                            num_outstanding, num_outstanding));
 722        }
 723
 724        return_VOID;
 725}
 726
 727#endif                          /* ACPI_DBG_TRACK_ALLOCATIONS */
 728