linux/drivers/isdn/i4l/isdn_tty.c
<<
>>
Prefs
   1/*
   2 * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
   3 *
   4 * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
   5 * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
   6 *
   7 * This software may be used and distributed according to the terms
   8 * of the GNU General Public License, incorporated herein by reference.
   9 *
  10 */
  11#undef ISDN_TTY_STAT_DEBUG
  12
  13#include <linux/isdn.h>
  14#include <linux/serial.h> /* ASYNC_* flags */
  15#include <linux/slab.h>
  16#include <linux/delay.h>
  17#include <linux/mutex.h>
  18#include <linux/sched/signal.h>
  19#include "isdn_common.h"
  20#include "isdn_tty.h"
  21#ifdef CONFIG_ISDN_AUDIO
  22#include "isdn_audio.h"
  23#define VBUF 0x3e0
  24#define VBUFX (VBUF/16)
  25#endif
  26
  27#define FIX_FILE_TRANSFER
  28#define DUMMY_HAYES_AT
  29
  30/* Prototypes */
  31
  32static DEFINE_MUTEX(modem_info_mutex);
  33static int isdn_tty_edit_at(const char *, int, modem_info *);
  34static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *);
  35static void isdn_tty_modem_reset_regs(modem_info *, int);
  36static void isdn_tty_cmd_ATA(modem_info *);
  37static void isdn_tty_flush_buffer(struct tty_struct *);
  38static void isdn_tty_modem_result(int, modem_info *);
  39#ifdef CONFIG_ISDN_AUDIO
  40static int isdn_tty_countDLE(unsigned char *, int);
  41#endif
  42
  43/* Leave this unchanged unless you know what you do! */
  44#define MODEM_PARANOIA_CHECK
  45#define MODEM_DO_RESTART
  46
  47static int bit2si[8] =
  48{1, 5, 7, 7, 7, 7, 7, 7};
  49static int si2bit[8] =
  50{4, 1, 4, 4, 4, 4, 4, 4};
  51
  52/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
  53 * to stuff incoming data directly into a tty's flip-buffer. This
  54 * is done to speed up tty-receiving if the receive-queue is empty.
  55 * This routine MUST be called with interrupts off.
  56 * Return:
  57 *  1 = Success
  58 *  0 = Failure, data has to be buffered and later processed by
  59 *      isdn_tty_readmodem().
  60 */
  61static int
  62isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
  63{
  64        struct tty_port *port = &info->port;
  65        int c;
  66        int len;
  67        char last;
  68
  69        if (!info->online)
  70                return 0;
  71
  72        if (!(info->mcr & UART_MCR_RTS))
  73                return 0;
  74
  75        len = skb->len
  76#ifdef CONFIG_ISDN_AUDIO
  77                + ISDN_AUDIO_SKB_DLECOUNT(skb)
  78#endif
  79                ;
  80
  81        c = tty_buffer_request_room(port, len);
  82        if (c < len)
  83                return 0;
  84
  85#ifdef CONFIG_ISDN_AUDIO
  86        if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
  87                int l = skb->len;
  88                unsigned char *dp = skb->data;
  89                while (--l) {
  90                        if (*dp == DLE)
  91                                tty_insert_flip_char(port, DLE, 0);
  92                        tty_insert_flip_char(port, *dp++, 0);
  93                }
  94                if (*dp == DLE)
  95                        tty_insert_flip_char(port, DLE, 0);
  96                last = *dp;
  97        } else {
  98#endif
  99                if (len > 1)
 100                        tty_insert_flip_string(port, skb->data, len - 1);
 101                last = skb->data[len - 1];
 102#ifdef CONFIG_ISDN_AUDIO
 103        }
 104#endif
 105        if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
 106                tty_insert_flip_char(port, last, 0xFF);
 107        else
 108                tty_insert_flip_char(port, last, TTY_NORMAL);
 109        tty_flip_buffer_push(port);
 110        kfree_skb(skb);
 111
 112        return 1;
 113}
 114
 115/* isdn_tty_readmodem() is called periodically from within timer-interrupt.
 116 * It tries getting received data from the receive queue an stuff it into
 117 * the tty's flip-buffer.
 118 */
 119void
 120isdn_tty_readmodem(void)
 121{
 122        int resched = 0;
 123        int midx;
 124        int i;
 125        int r;
 126        modem_info *info;
 127
 128        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
 129                midx = dev->m_idx[i];
 130                if (midx < 0)
 131                        continue;
 132
 133                info = &dev->mdm.info[midx];
 134                if (!info->online)
 135                        continue;
 136
 137                r = 0;
 138#ifdef CONFIG_ISDN_AUDIO
 139                isdn_audio_eval_dtmf(info);
 140                if ((info->vonline & 1) && (info->emu.vpar[1]))
 141                        isdn_audio_eval_silence(info);
 142#endif
 143                if (info->mcr & UART_MCR_RTS) {
 144                        /* CISCO AsyncPPP Hack */
 145                        if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
 146                                r = isdn_readbchan_tty(info->isdn_driver,
 147                                                info->isdn_channel,
 148                                                &info->port, 0);
 149                        else
 150                                r = isdn_readbchan_tty(info->isdn_driver,
 151                                                info->isdn_channel,
 152                                                &info->port, 1);
 153                        if (r)
 154                                tty_flip_buffer_push(&info->port);
 155                } else
 156                        r = 1;
 157
 158                if (r) {
 159                        info->rcvsched = 0;
 160                        resched = 1;
 161                } else
 162                        info->rcvsched = 1;
 163        }
 164        if (!resched)
 165                isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
 166}
 167
 168int
 169isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
 170{
 171        ulong flags;
 172        int midx;
 173#ifdef CONFIG_ISDN_AUDIO
 174        int ifmt;
 175#endif
 176        modem_info *info;
 177
 178        if ((midx = dev->m_idx[i]) < 0) {
 179                /* if midx is invalid, packet is not for tty */
 180                return 0;
 181        }
 182        info = &dev->mdm.info[midx];
 183#ifdef CONFIG_ISDN_AUDIO
 184        ifmt = 1;
 185
 186        if ((info->vonline) && (!info->emu.vpar[4]))
 187                isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt);
 188        if ((info->vonline & 1) && (info->emu.vpar[1]))
 189                isdn_audio_calc_silence(info, skb->data, skb->len, ifmt);
 190#endif
 191        if ((info->online < 2)
 192#ifdef CONFIG_ISDN_AUDIO
 193            && (!(info->vonline & 1))
 194#endif
 195                ) {
 196                /* If Modem not listening, drop data */
 197                kfree_skb(skb);
 198                return 1;
 199        }
 200        if (info->emu.mdmreg[REG_T70] & BIT_T70) {
 201                if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) {
 202                        /* T.70 decoding: throw away the T.70 header (2 or 4 bytes)   */
 203                        if (skb->data[0] == 3) /* pure data packet -> 4 byte headers  */
 204                                skb_pull(skb, 4);
 205                        else
 206                                if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr  */
 207                                        skb_pull(skb, 2);
 208                } else
 209                        /* T.70 decoding: Simply throw away the T.70 header (4 bytes) */
 210                        if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1)))
 211                                skb_pull(skb, 4);
 212        }
 213#ifdef CONFIG_ISDN_AUDIO
 214        ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
 215        ISDN_AUDIO_SKB_LOCK(skb) = 0;
 216        if (info->vonline & 1) {
 217                /* voice conversion/compression */
 218                switch (info->emu.vpar[3]) {
 219                case 2:
 220                case 3:
 221                case 4:
 222                        /* adpcm
 223                         * Since compressed data takes less
 224                         * space, we can overwrite the buffer.
 225                         */
 226                        skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
 227                                                            ifmt,
 228                                                            skb->data,
 229                                                            skb->data,
 230                                                            skb->len));
 231                        break;
 232                case 5:
 233                        /* a-law */
 234                        if (!ifmt)
 235                                isdn_audio_ulaw2alaw(skb->data, skb->len);
 236                        break;
 237                case 6:
 238                        /* u-law */
 239                        if (ifmt)
 240                                isdn_audio_alaw2ulaw(skb->data, skb->len);
 241                        break;
 242                }
 243                ISDN_AUDIO_SKB_DLECOUNT(skb) =
 244                        isdn_tty_countDLE(skb->data, skb->len);
 245        }
 246#ifdef CONFIG_ISDN_TTY_FAX
 247        else {
 248                if (info->faxonline & 2) {
 249                        isdn_tty_fax_bitorder(info, skb);
 250                        ISDN_AUDIO_SKB_DLECOUNT(skb) =
 251                                isdn_tty_countDLE(skb->data, skb->len);
 252                }
 253        }
 254#endif
 255#endif
 256        /* Try to deliver directly via tty-buf if queue is empty */
 257        spin_lock_irqsave(&info->readlock, flags);
 258        if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
 259                if (isdn_tty_try_read(info, skb)) {
 260                        spin_unlock_irqrestore(&info->readlock, flags);
 261                        return 1;
 262                }
 263        /* Direct deliver failed or queue wasn't empty.
 264         * Queue up for later dequeueing via timer-irq.
 265         */
 266        __skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb);
 267        dev->drv[di]->rcvcount[channel] +=
 268                (skb->len
 269#ifdef CONFIG_ISDN_AUDIO
 270                 + ISDN_AUDIO_SKB_DLECOUNT(skb)
 271#endif
 272                        );
 273        spin_unlock_irqrestore(&info->readlock, flags);
 274        /* Schedule dequeuing */
 275        if ((dev->modempoll) && (info->rcvsched))
 276                isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
 277        return 1;
 278}
 279
 280static void
 281isdn_tty_cleanup_xmit(modem_info *info)
 282{
 283        skb_queue_purge(&info->xmit_queue);
 284#ifdef CONFIG_ISDN_AUDIO
 285        skb_queue_purge(&info->dtmf_queue);
 286#endif
 287}
 288
 289static void
 290isdn_tty_tint(modem_info *info)
 291{
 292        struct sk_buff *skb = skb_dequeue(&info->xmit_queue);
 293        int len, slen;
 294
 295        if (!skb)
 296                return;
 297        len = skb->len;
 298        if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
 299                                           info->isdn_channel, 1, skb)) == len) {
 300                struct tty_struct *tty = info->port.tty;
 301                info->send_outstanding++;
 302                info->msr &= ~UART_MSR_CTS;
 303                info->lsr &= ~UART_LSR_TEMT;
 304                tty_wakeup(tty);
 305                return;
 306        }
 307        if (slen < 0) {
 308                /* Error: no channel, already shutdown, or wrong parameter */
 309                dev_kfree_skb(skb);
 310                return;
 311        }
 312        skb_queue_head(&info->xmit_queue, skb);
 313}
 314
 315#ifdef CONFIG_ISDN_AUDIO
 316static int
 317isdn_tty_countDLE(unsigned char *buf, int len)
 318{
 319        int count = 0;
 320
 321        while (len--)
 322                if (*buf++ == DLE)
 323                        count++;
 324        return count;
 325}
 326
 327/* This routine is called from within isdn_tty_write() to perform
 328 * DLE-decoding when sending audio-data.
 329 */
 330static int
 331isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
 332{
 333        unsigned char *p = &info->port.xmit_buf[info->xmit_count];
 334        int count = 0;
 335
 336        while (len > 0) {
 337                if (m->lastDLE) {
 338                        m->lastDLE = 0;
 339                        switch (*p) {
 340                        case DLE:
 341                                /* Escape code */
 342                                if (len > 1)
 343                                        memmove(p, p + 1, len - 1);
 344                                p--;
 345                                count++;
 346                                break;
 347                        case ETX:
 348                                /* End of data */
 349                                info->vonline |= 4;
 350                                return count;
 351                        case DC4:
 352                                /* Abort RX */
 353                                info->vonline &= ~1;
 354#ifdef ISDN_DEBUG_MODEM_VOICE
 355                                printk(KERN_DEBUG
 356                                       "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
 357                                       info->line);
 358#endif
 359                                isdn_tty_at_cout("\020\003", info);
 360                                if (!info->vonline) {
 361#ifdef ISDN_DEBUG_MODEM_VOICE
 362                                        printk(KERN_DEBUG
 363                                               "DLEdown: send VCON on ttyI%d\n",
 364                                               info->line);
 365#endif
 366                                        isdn_tty_at_cout("\r\nVCON\r\n", info);
 367                                }
 368                                /* Fall through */
 369                        case 'q':
 370                        case 's':
 371                                /* Silence */
 372                                if (len > 1)
 373                                        memmove(p, p + 1, len - 1);
 374                                p--;
 375                                break;
 376                        }
 377                } else {
 378                        if (*p == DLE)
 379                                m->lastDLE = 1;
 380                        else
 381                                count++;
 382                }
 383                p++;
 384                len--;
 385        }
 386        if (len < 0) {
 387                printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n");
 388                return 0;
 389        }
 390        return count;
 391}
 392
 393/* This routine is called from within isdn_tty_write() when receiving
 394 * audio-data. It interrupts receiving, if an character other than
 395 * ^S or ^Q is sent.
 396 */
 397static int
 398isdn_tty_end_vrx(const char *buf, int c)
 399{
 400        char ch;
 401
 402        while (c--) {
 403                ch = *buf;
 404                if ((ch != 0x11) && (ch != 0x13))
 405                        return 1;
 406                buf++;
 407        }
 408        return 0;
 409}
 410
 411static int voice_cf[7] =
 412{0, 0, 4, 3, 2, 0, 0};
 413
 414#endif                          /* CONFIG_ISDN_AUDIO */
 415
 416/* isdn_tty_senddown() is called either directly from within isdn_tty_write()
 417 * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls
 418 * outgoing data from the tty's xmit-buffer, handles voice-decompression or
 419 * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint.
 420 */
 421static void
 422isdn_tty_senddown(modem_info *info)
 423{
 424        int buflen;
 425        int skb_res;
 426#ifdef CONFIG_ISDN_AUDIO
 427        int audio_len;
 428#endif
 429        struct sk_buff *skb;
 430
 431#ifdef CONFIG_ISDN_AUDIO
 432        if (info->vonline & 4) {
 433                info->vonline &= ~6;
 434                if (!info->vonline) {
 435#ifdef ISDN_DEBUG_MODEM_VOICE
 436                        printk(KERN_DEBUG
 437                               "senddown: send VCON on ttyI%d\n",
 438                               info->line);
 439#endif
 440                        isdn_tty_at_cout("\r\nVCON\r\n", info);
 441                }
 442        }
 443#endif
 444        if (!(buflen = info->xmit_count))
 445                return;
 446        if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0)
 447                info->msr &= ~UART_MSR_CTS;
 448        info->lsr &= ~UART_LSR_TEMT;
 449        /* info->xmit_count is modified here and in isdn_tty_write().
 450         * So we return here if isdn_tty_write() is in the
 451         * critical section.
 452         */
 453        atomic_inc(&info->xmit_lock);
 454        if (!(atomic_dec_and_test(&info->xmit_lock)))
 455                return;
 456        if (info->isdn_driver < 0) {
 457                info->xmit_count = 0;
 458                return;
 459        }
 460        skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4;
 461#ifdef CONFIG_ISDN_AUDIO
 462        if (info->vonline & 2)
 463                audio_len = buflen * voice_cf[info->emu.vpar[3]];
 464        else
 465                audio_len = 0;
 466        skb = dev_alloc_skb(skb_res + buflen + audio_len);
 467#else
 468        skb = dev_alloc_skb(skb_res + buflen);
 469#endif
 470        if (!skb) {
 471                printk(KERN_WARNING
 472                       "isdn_tty: Out of memory in ttyI%d senddown\n",
 473                       info->line);
 474                return;
 475        }
 476        skb_reserve(skb, skb_res);
 477        skb_put_data(skb, info->port.xmit_buf, buflen);
 478        info->xmit_count = 0;
 479#ifdef CONFIG_ISDN_AUDIO
 480        if (info->vonline & 2) {
 481                /* For now, ifmt is fixed to 1 (alaw), since this
 482                 * is used with ISDN everywhere in the world, except
 483                 * US, Canada and Japan.
 484                 * Later, when US-ISDN protocols are implemented,
 485                 * this setting will depend on the D-channel protocol.
 486                 */
 487                int ifmt = 1;
 488
 489                /* voice conversion/decompression */
 490                switch (info->emu.vpar[3]) {
 491                case 2:
 492                case 3:
 493                case 4:
 494                        /* adpcm, compatible to ZyXel 1496 modem
 495                         * with ROM revision 6.01
 496                         */
 497                        audio_len = isdn_audio_adpcm2xlaw(info->adpcms,
 498                                                          ifmt,
 499                                                          skb->data,
 500                                                          skb_put(skb, audio_len),
 501                                                          buflen);
 502                        skb_pull(skb, buflen);
 503                        skb_trim(skb, audio_len);
 504                        break;
 505                case 5:
 506                        /* a-law */
 507                        if (!ifmt)
 508                                isdn_audio_alaw2ulaw(skb->data,
 509                                                     buflen);
 510                        break;
 511                case 6:
 512                        /* u-law */
 513                        if (ifmt)
 514                                isdn_audio_ulaw2alaw(skb->data,
 515                                                     buflen);
 516                        break;
 517                }
 518        }
 519#endif                          /* CONFIG_ISDN_AUDIO */
 520        if (info->emu.mdmreg[REG_T70] & BIT_T70) {
 521                /* Add T.70 simplified header */
 522                if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT)
 523                        memcpy(skb_push(skb, 2), "\1\0", 2);
 524                else
 525                        memcpy(skb_push(skb, 4), "\1\0\1\0", 4);
 526        }
 527        skb_queue_tail(&info->xmit_queue, skb);
 528}
 529
 530/************************************************************
 531 *
 532 * Modem-functions
 533 *
 534 * mostly "stolen" from original Linux-serial.c and friends.
 535 *
 536 ************************************************************/
 537
 538/* The next routine is called once from within timer-interrupt
 539 * triggered within isdn_tty_modem_ncarrier(). It calls
 540 * isdn_tty_modem_result() to stuff a "NO CARRIER" Message
 541 * into the tty's buffer.
 542 */
 543static void
 544isdn_tty_modem_do_ncarrier(unsigned long data)
 545{
 546        modem_info *info = (modem_info *) data;
 547        isdn_tty_modem_result(RESULT_NO_CARRIER, info);
 548}
 549
 550/* Next routine is called, whenever the DTR-signal is raised.
 551 * It checks the ncarrier-flag, and triggers the above routine
 552 * when necessary. The ncarrier-flag is set, whenever DTR goes
 553 * low.
 554 */
 555static void
 556isdn_tty_modem_ncarrier(modem_info *info)
 557{
 558        if (info->ncarrier) {
 559                info->nc_timer.expires = jiffies + HZ;
 560                add_timer(&info->nc_timer);
 561        }
 562}
 563
 564/*
 565 * return the usage calculated by si and layer 2 protocol
 566 */
 567static int
 568isdn_calc_usage(int si, int l2)
 569{
 570        int usg = ISDN_USAGE_MODEM;
 571
 572#ifdef CONFIG_ISDN_AUDIO
 573        if (si == 1) {
 574                switch (l2) {
 575                case ISDN_PROTO_L2_MODEM:
 576                        usg = ISDN_USAGE_MODEM;
 577                        break;
 578#ifdef CONFIG_ISDN_TTY_FAX
 579                case ISDN_PROTO_L2_FAX:
 580                        usg = ISDN_USAGE_FAX;
 581                        break;
 582#endif
 583                case ISDN_PROTO_L2_TRANS:
 584                default:
 585                        usg = ISDN_USAGE_VOICE;
 586                        break;
 587                }
 588        }
 589#endif
 590        return (usg);
 591}
 592
 593/* isdn_tty_dial() performs dialing of a tty an the necessary
 594 * setup of the lower levels before that.
 595 */
 596static void
 597isdn_tty_dial(char *n, modem_info *info, atemu *m)
 598{
 599        int usg = ISDN_USAGE_MODEM;
 600        int si = 7;
 601        int l2 = m->mdmreg[REG_L2PROT];
 602        u_long flags;
 603        isdn_ctrl cmd;
 604        int i;
 605        int j;
 606
 607        for (j = 7; j >= 0; j--)
 608                if (m->mdmreg[REG_SI1] & (1 << j)) {
 609                        si = bit2si[j];
 610                        break;
 611                }
 612        usg = isdn_calc_usage(si, l2);
 613#ifdef CONFIG_ISDN_AUDIO
 614        if ((si == 1) &&
 615            (l2 != ISDN_PROTO_L2_MODEM)
 616#ifdef CONFIG_ISDN_TTY_FAX
 617            && (l2 != ISDN_PROTO_L2_FAX)
 618#endif
 619                ) {
 620                l2 = ISDN_PROTO_L2_TRANS;
 621                usg = ISDN_USAGE_VOICE;
 622        }
 623#endif
 624        m->mdmreg[REG_SI1I] = si2bit[si];
 625        spin_lock_irqsave(&dev->lock, flags);
 626        i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 627        if (i < 0) {
 628                spin_unlock_irqrestore(&dev->lock, flags);
 629                isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 630        } else {
 631                info->isdn_driver = dev->drvmap[i];
 632                info->isdn_channel = dev->chanmap[i];
 633                info->drv_index = i;
 634                dev->m_idx[i] = info->line;
 635                dev->usage[i] |= ISDN_USAGE_OUTGOING;
 636                info->last_dir = 1;
 637                strcpy(info->last_num, n);
 638                isdn_info_update();
 639                spin_unlock_irqrestore(&dev->lock, flags);
 640                cmd.driver = info->isdn_driver;
 641                cmd.arg = info->isdn_channel;
 642                cmd.command = ISDN_CMD_CLREAZ;
 643                isdn_command(&cmd);
 644                strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 645                cmd.driver = info->isdn_driver;
 646                cmd.command = ISDN_CMD_SETEAZ;
 647                isdn_command(&cmd);
 648                cmd.driver = info->isdn_driver;
 649                cmd.command = ISDN_CMD_SETL2;
 650                info->last_l2 = l2;
 651                cmd.arg = info->isdn_channel + (l2 << 8);
 652                isdn_command(&cmd);
 653                cmd.driver = info->isdn_driver;
 654                cmd.command = ISDN_CMD_SETL3;
 655                cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 656#ifdef CONFIG_ISDN_TTY_FAX
 657                if (l2 == ISDN_PROTO_L2_FAX) {
 658                        cmd.parm.fax = info->fax;
 659                        info->fax->direction = ISDN_TTY_FAX_CONN_OUT;
 660                }
 661#endif
 662                isdn_command(&cmd);
 663                cmd.driver = info->isdn_driver;
 664                cmd.arg = info->isdn_channel;
 665                sprintf(cmd.parm.setup.phone, "%s", n);
 666                sprintf(cmd.parm.setup.eazmsn, "%s",
 667                        isdn_map_eaz2msn(m->msn, info->isdn_driver));
 668                cmd.parm.setup.si1 = si;
 669                cmd.parm.setup.si2 = m->mdmreg[REG_SI2];
 670                cmd.command = ISDN_CMD_DIAL;
 671                info->dialing = 1;
 672                info->emu.carrierwait = 0;
 673                strcpy(dev->num[i], n);
 674                isdn_info_update();
 675                isdn_command(&cmd);
 676                isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
 677        }
 678}
 679
 680/* isdn_tty_hangup() disassociates a tty from the real
 681 * ISDN-line (hangup). The usage-status is cleared
 682 * and some cleanup is done also.
 683 */
 684void
 685isdn_tty_modem_hup(modem_info *info, int local)
 686{
 687        isdn_ctrl cmd;
 688        int di, ch;
 689
 690        if (!info)
 691                return;
 692
 693        di = info->isdn_driver;
 694        ch = info->isdn_channel;
 695        if (di < 0 || ch < 0)
 696                return;
 697
 698        info->isdn_driver = -1;
 699        info->isdn_channel = -1;
 700
 701#ifdef ISDN_DEBUG_MODEM_HUP
 702        printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
 703#endif
 704        info->rcvsched = 0;
 705        isdn_tty_flush_buffer(info->port.tty);
 706        if (info->online) {
 707                info->last_lhup = local;
 708                info->online = 0;
 709                isdn_tty_modem_result(RESULT_NO_CARRIER, info);
 710        }
 711#ifdef CONFIG_ISDN_AUDIO
 712        info->vonline = 0;
 713#ifdef CONFIG_ISDN_TTY_FAX
 714        info->faxonline = 0;
 715        info->fax->phase = ISDN_FAX_PHASE_IDLE;
 716#endif
 717        info->emu.vpar[4] = 0;
 718        info->emu.vpar[5] = 8;
 719        kfree(info->dtmf_state);
 720        info->dtmf_state = NULL;
 721        kfree(info->silence_state);
 722        info->silence_state = NULL;
 723        kfree(info->adpcms);
 724        info->adpcms = NULL;
 725        kfree(info->adpcmr);
 726        info->adpcmr = NULL;
 727#endif
 728        if ((info->msr & UART_MSR_RI) &&
 729            (info->emu.mdmreg[REG_RUNG] & BIT_RUNG))
 730                isdn_tty_modem_result(RESULT_RUNG, info);
 731        info->msr &= ~(UART_MSR_DCD | UART_MSR_RI);
 732        info->lsr |= UART_LSR_TEMT;
 733
 734        if (local) {
 735                cmd.driver = di;
 736                cmd.command = ISDN_CMD_HANGUP;
 737                cmd.arg = ch;
 738                isdn_command(&cmd);
 739        }
 740
 741        isdn_all_eaz(di, ch);
 742        info->emu.mdmreg[REG_RINGCNT] = 0;
 743        isdn_free_channel(di, ch, 0);
 744
 745        if (info->drv_index >= 0) {
 746                dev->m_idx[info->drv_index] = -1;
 747                info->drv_index = -1;
 748        }
 749}
 750
 751/*
 752 * Begin of a CAPI like interface, currently used only for
 753 * supplementary service (CAPI 2.0 part III)
 754 */
 755#include <linux/isdn/capicmd.h>
 756#include <linux/module.h>
 757
 758int
 759isdn_tty_capi_facility(capi_msg *cm) {
 760        return (-1); /* dummy */
 761}
 762
 763/* isdn_tty_suspend() tries to suspend the current tty connection
 764 */
 765static void
 766isdn_tty_suspend(char *id, modem_info *info, atemu *m)
 767{
 768        isdn_ctrl cmd;
 769
 770        int l;
 771
 772        if (!info)
 773                return;
 774
 775#ifdef ISDN_DEBUG_MODEM_SERVICES
 776        printk(KERN_DEBUG "Msusp ttyI%d\n", info->line);
 777#endif
 778        l = strlen(id);
 779        if ((info->isdn_driver >= 0)) {
 780                cmd.parm.cmsg.Length = l + 18;
 781                cmd.parm.cmsg.Command = CAPI_FACILITY;
 782                cmd.parm.cmsg.Subcommand = CAPI_REQ;
 783                cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 784                cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
 785                cmd.parm.cmsg.para[1] = 0;
 786                cmd.parm.cmsg.para[2] = l + 3;
 787                cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */
 788                cmd.parm.cmsg.para[4] = 0;
 789                cmd.parm.cmsg.para[5] = l;
 790                strncpy(&cmd.parm.cmsg.para[6], id, l);
 791                cmd.command = CAPI_PUT_MESSAGE;
 792                cmd.driver = info->isdn_driver;
 793                cmd.arg = info->isdn_channel;
 794                isdn_command(&cmd);
 795        }
 796}
 797
 798/* isdn_tty_resume() tries to resume a suspended call
 799 * setup of the lower levels before that. unfortunately here is no
 800 * checking for compatibility of used protocols implemented by Q931
 801 * It does the same things like isdn_tty_dial, the last command
 802 * is different, may be we can merge it.
 803 */
 804
 805static void
 806isdn_tty_resume(char *id, modem_info *info, atemu *m)
 807{
 808        int usg = ISDN_USAGE_MODEM;
 809        int si = 7;
 810        int l2 = m->mdmreg[REG_L2PROT];
 811        isdn_ctrl cmd;
 812        ulong flags;
 813        int i;
 814        int j;
 815        int l;
 816
 817        l = strlen(id);
 818        for (j = 7; j >= 0; j--)
 819                if (m->mdmreg[REG_SI1] & (1 << j)) {
 820                        si = bit2si[j];
 821                        break;
 822                }
 823        usg = isdn_calc_usage(si, l2);
 824#ifdef CONFIG_ISDN_AUDIO
 825        if ((si == 1) &&
 826            (l2 != ISDN_PROTO_L2_MODEM)
 827#ifdef CONFIG_ISDN_TTY_FAX
 828            && (l2 != ISDN_PROTO_L2_FAX)
 829#endif
 830                ) {
 831                l2 = ISDN_PROTO_L2_TRANS;
 832                usg = ISDN_USAGE_VOICE;
 833        }
 834#endif
 835        m->mdmreg[REG_SI1I] = si2bit[si];
 836        spin_lock_irqsave(&dev->lock, flags);
 837        i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 838        if (i < 0) {
 839                spin_unlock_irqrestore(&dev->lock, flags);
 840                isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 841        } else {
 842                info->isdn_driver = dev->drvmap[i];
 843                info->isdn_channel = dev->chanmap[i];
 844                info->drv_index = i;
 845                dev->m_idx[i] = info->line;
 846                dev->usage[i] |= ISDN_USAGE_OUTGOING;
 847                info->last_dir = 1;
 848//              strcpy(info->last_num, n);
 849                isdn_info_update();
 850                spin_unlock_irqrestore(&dev->lock, flags);
 851                cmd.driver = info->isdn_driver;
 852                cmd.arg = info->isdn_channel;
 853                cmd.command = ISDN_CMD_CLREAZ;
 854                isdn_command(&cmd);
 855                strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 856                cmd.driver = info->isdn_driver;
 857                cmd.command = ISDN_CMD_SETEAZ;
 858                isdn_command(&cmd);
 859                cmd.driver = info->isdn_driver;
 860                cmd.command = ISDN_CMD_SETL2;
 861                info->last_l2 = l2;
 862                cmd.arg = info->isdn_channel + (l2 << 8);
 863                isdn_command(&cmd);
 864                cmd.driver = info->isdn_driver;
 865                cmd.command = ISDN_CMD_SETL3;
 866                cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 867                isdn_command(&cmd);
 868                cmd.driver = info->isdn_driver;
 869                cmd.arg = info->isdn_channel;
 870                cmd.parm.cmsg.Length = l + 18;
 871                cmd.parm.cmsg.Command = CAPI_FACILITY;
 872                cmd.parm.cmsg.Subcommand = CAPI_REQ;
 873                cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 874                cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
 875                cmd.parm.cmsg.para[1] = 0;
 876                cmd.parm.cmsg.para[2] = l + 3;
 877                cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */
 878                cmd.parm.cmsg.para[4] = 0;
 879                cmd.parm.cmsg.para[5] = l;
 880                strncpy(&cmd.parm.cmsg.para[6], id, l);
 881                cmd.command = CAPI_PUT_MESSAGE;
 882                info->dialing = 1;
 883//              strcpy(dev->num[i], n);
 884                isdn_info_update();
 885                isdn_command(&cmd);
 886                isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
 887        }
 888}
 889
 890/* isdn_tty_send_msg() sends a message to a HL driver
 891 * This is used for hybrid modem cards to send AT commands to it
 892 */
 893
 894static void
 895isdn_tty_send_msg(modem_info *info, atemu *m, char *msg)
 896{
 897        int usg = ISDN_USAGE_MODEM;
 898        int si = 7;
 899        int l2 = m->mdmreg[REG_L2PROT];
 900        isdn_ctrl cmd;
 901        ulong flags;
 902        int i;
 903        int j;
 904        int l;
 905
 906        l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg)
 907                + sizeof(cmd.parm.cmsg.para) - 2);
 908
 909        if (!l) {
 910                isdn_tty_modem_result(RESULT_ERROR, info);
 911                return;
 912        }
 913        for (j = 7; j >= 0; j--)
 914                if (m->mdmreg[REG_SI1] & (1 << j)) {
 915                        si = bit2si[j];
 916                        break;
 917                }
 918        usg = isdn_calc_usage(si, l2);
 919#ifdef CONFIG_ISDN_AUDIO
 920        if ((si == 1) &&
 921            (l2 != ISDN_PROTO_L2_MODEM)
 922#ifdef CONFIG_ISDN_TTY_FAX
 923            && (l2 != ISDN_PROTO_L2_FAX)
 924#endif
 925                ) {
 926                l2 = ISDN_PROTO_L2_TRANS;
 927                usg = ISDN_USAGE_VOICE;
 928        }
 929#endif
 930        m->mdmreg[REG_SI1I] = si2bit[si];
 931        spin_lock_irqsave(&dev->lock, flags);
 932        i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
 933        if (i < 0) {
 934                spin_unlock_irqrestore(&dev->lock, flags);
 935                isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
 936        } else {
 937                info->isdn_driver = dev->drvmap[i];
 938                info->isdn_channel = dev->chanmap[i];
 939                info->drv_index = i;
 940                dev->m_idx[i] = info->line;
 941                dev->usage[i] |= ISDN_USAGE_OUTGOING;
 942                info->last_dir = 1;
 943                isdn_info_update();
 944                spin_unlock_irqrestore(&dev->lock, flags);
 945                cmd.driver = info->isdn_driver;
 946                cmd.arg = info->isdn_channel;
 947                cmd.command = ISDN_CMD_CLREAZ;
 948                isdn_command(&cmd);
 949                strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
 950                cmd.driver = info->isdn_driver;
 951                cmd.command = ISDN_CMD_SETEAZ;
 952                isdn_command(&cmd);
 953                cmd.driver = info->isdn_driver;
 954                cmd.command = ISDN_CMD_SETL2;
 955                info->last_l2 = l2;
 956                cmd.arg = info->isdn_channel + (l2 << 8);
 957                isdn_command(&cmd);
 958                cmd.driver = info->isdn_driver;
 959                cmd.command = ISDN_CMD_SETL3;
 960                cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
 961                isdn_command(&cmd);
 962                cmd.driver = info->isdn_driver;
 963                cmd.arg = info->isdn_channel;
 964                cmd.parm.cmsg.Length = l + 14;
 965                cmd.parm.cmsg.Command = CAPI_MANUFACTURER;
 966                cmd.parm.cmsg.Subcommand = CAPI_REQ;
 967                cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
 968                cmd.parm.cmsg.para[0] = l + 1;
 969                strncpy(&cmd.parm.cmsg.para[1], msg, l);
 970                cmd.parm.cmsg.para[l + 1] = 0xd;
 971                cmd.command = CAPI_PUT_MESSAGE;
 972/*              info->dialing = 1;
 973                strcpy(dev->num[i], n);
 974                isdn_info_update();
 975*/
 976                isdn_command(&cmd);
 977        }
 978}
 979
 980static inline int
 981isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
 982{
 983#ifdef MODEM_PARANOIA_CHECK
 984        if (!info) {
 985                printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n",
 986                       name, routine);
 987                return 1;
 988        }
 989        if (info->magic != ISDN_ASYNC_MAGIC) {
 990                printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n",
 991                       name, routine);
 992                return 1;
 993        }
 994#endif
 995        return 0;
 996}
 997
 998/*
 999 * This routine is called to set the UART divisor registers to match
1000 * the specified baud rate for a serial port.
1001 */
1002static void
1003isdn_tty_change_speed(modem_info *info)
1004{
1005        struct tty_port *port = &info->port;
1006        uint cflag,
1007                cval,
1008                quot;
1009        int i;
1010
1011        if (!port->tty)
1012                return;
1013        cflag = port->tty->termios.c_cflag;
1014
1015        quot = i = cflag & CBAUD;
1016        if (i & CBAUDEX) {
1017                i &= ~CBAUDEX;
1018                if (i < 1 || i > 2)
1019                        port->tty->termios.c_cflag &= ~CBAUDEX;
1020                else
1021                        i += 15;
1022        }
1023        if (quot) {
1024                info->mcr |= UART_MCR_DTR;
1025                isdn_tty_modem_ncarrier(info);
1026        } else {
1027                info->mcr &= ~UART_MCR_DTR;
1028                if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1029#ifdef ISDN_DEBUG_MODEM_HUP
1030                        printk(KERN_DEBUG "Mhup in changespeed\n");
1031#endif
1032                        if (info->online)
1033                                info->ncarrier = 1;
1034                        isdn_tty_modem_reset_regs(info, 0);
1035                        isdn_tty_modem_hup(info, 1);
1036                }
1037                return;
1038        }
1039        /* byte size and parity */
1040        cval = cflag & (CSIZE | CSTOPB);
1041        cval >>= 4;
1042        if (cflag & PARENB)
1043                cval |= UART_LCR_PARITY;
1044        if (!(cflag & PARODD))
1045                cval |= UART_LCR_EPAR;
1046
1047        tty_port_set_check_carrier(port, ~cflag & CLOCAL);
1048}
1049
1050static int
1051isdn_tty_startup(modem_info *info)
1052{
1053        if (tty_port_initialized(&info->port))
1054                return 0;
1055        isdn_lock_drivers();
1056#ifdef ISDN_DEBUG_MODEM_OPEN
1057        printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line);
1058#endif
1059        /*
1060         * Now, initialize the UART
1061         */
1062        info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
1063        if (info->port.tty)
1064                clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
1065        /*
1066         * and set the speed of the serial port
1067         */
1068        isdn_tty_change_speed(info);
1069
1070        tty_port_set_initialized(&info->port, 1);
1071        info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
1072        info->send_outstanding = 0;
1073        return 0;
1074}
1075
1076/*
1077 * This routine will shutdown a serial port; interrupts are disabled, and
1078 * DTR is dropped if the hangup on close termio flag is on.
1079 */
1080static void
1081isdn_tty_shutdown(modem_info *info)
1082{
1083        if (!tty_port_initialized(&info->port))
1084                return;
1085#ifdef ISDN_DEBUG_MODEM_OPEN
1086        printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
1087#endif
1088        isdn_unlock_drivers();
1089        info->msr &= ~UART_MSR_RI;
1090        if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
1091                info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
1092                if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1093                        isdn_tty_modem_reset_regs(info, 0);
1094#ifdef ISDN_DEBUG_MODEM_HUP
1095                        printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n");
1096#endif
1097                        isdn_tty_modem_hup(info, 1);
1098                }
1099        }
1100        if (info->port.tty)
1101                set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1102
1103        tty_port_set_initialized(&info->port, 0);
1104}
1105
1106/* isdn_tty_write() is the main send-routine. It is called from the upper
1107 * levels within the kernel to perform sending data. Depending on the
1108 * online-flag it either directs output to the at-command-interpreter or
1109 * to the lower level. Additional tasks done here:
1110 *  - If online, check for escape-sequence (+++)
1111 *  - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes.
1112 *  - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed.
1113 *  - If dialing, abort dial.
1114 */
1115static int
1116isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
1117{
1118        int c;
1119        int total = 0;
1120        modem_info *info = (modem_info *) tty->driver_data;
1121        atemu *m = &info->emu;
1122
1123        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write"))
1124                return 0;
1125        /* See isdn_tty_senddown() */
1126        atomic_inc(&info->xmit_lock);
1127        while (1) {
1128                c = count;
1129                if (c > info->xmit_size - info->xmit_count)
1130                        c = info->xmit_size - info->xmit_count;
1131                if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize)
1132                        c = dev->drv[info->isdn_driver]->maxbufsize;
1133                if (c <= 0)
1134                        break;
1135                if ((info->online > 1)
1136#ifdef CONFIG_ISDN_AUDIO
1137                    || (info->vonline & 3)
1138#endif
1139                        ) {
1140#ifdef CONFIG_ISDN_AUDIO
1141                        if (!info->vonline)
1142#endif
1143                                isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
1144                                                   &(m->pluscount),
1145                                                   &(m->lastplus));
1146                        memcpy(&info->port.xmit_buf[info->xmit_count], buf, c);
1147#ifdef CONFIG_ISDN_AUDIO
1148                        if (info->vonline) {
1149                                int cc = isdn_tty_handleDLEdown(info, m, c);
1150                                if (info->vonline & 2) {
1151                                        if (!cc) {
1152                                                /* If DLE decoding results in zero-transmit, but
1153                                                 * c originally was non-zero, do a wakeup.
1154                                                 */
1155                                                tty_wakeup(tty);
1156                                                info->msr |= UART_MSR_CTS;
1157                                                info->lsr |= UART_LSR_TEMT;
1158                                        }
1159                                        info->xmit_count += cc;
1160                                }
1161                                if ((info->vonline & 3) == 1) {
1162                                        /* Do NOT handle Ctrl-Q or Ctrl-S
1163                                         * when in full-duplex audio mode.
1164                                         */
1165                                        if (isdn_tty_end_vrx(buf, c)) {
1166                                                info->vonline &= ~1;
1167#ifdef ISDN_DEBUG_MODEM_VOICE
1168                                                printk(KERN_DEBUG
1169                                                       "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n",
1170                                                       info->line);
1171#endif
1172                                                isdn_tty_at_cout("\020\003\r\nVCON\r\n", info);
1173                                        }
1174                                }
1175                        } else
1176                                if (TTY_IS_FCLASS1(info)) {
1177                                        int cc = isdn_tty_handleDLEdown(info, m, c);
1178
1179                                        if (info->vonline & 4) { /* ETX seen */
1180                                                isdn_ctrl c;
1181
1182                                                c.command = ISDN_CMD_FAXCMD;
1183                                                c.driver = info->isdn_driver;
1184                                                c.arg = info->isdn_channel;
1185                                                c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL;
1186                                                c.parm.aux.subcmd = ETX;
1187                                                isdn_command(&c);
1188                                        }
1189                                        info->vonline = 0;
1190#ifdef ISDN_DEBUG_MODEM_VOICE
1191                                        printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c);
1192#endif
1193                                        info->xmit_count += cc;
1194                                } else
1195#endif
1196                                        info->xmit_count += c;
1197                } else {
1198                        info->msr |= UART_MSR_CTS;
1199                        info->lsr |= UART_LSR_TEMT;
1200                        if (info->dialing) {
1201                                info->dialing = 0;
1202#ifdef ISDN_DEBUG_MODEM_HUP
1203                                printk(KERN_DEBUG "Mhup in isdn_tty_write\n");
1204#endif
1205                                isdn_tty_modem_result(RESULT_NO_CARRIER, info);
1206                                isdn_tty_modem_hup(info, 1);
1207                        } else
1208                                c = isdn_tty_edit_at(buf, c, info);
1209                }
1210                buf += c;
1211                count -= c;
1212                total += c;
1213        }
1214        atomic_dec(&info->xmit_lock);
1215        if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) {
1216                if (m->mdmreg[REG_DXMT] & BIT_DXMT) {
1217                        isdn_tty_senddown(info);
1218                        isdn_tty_tint(info);
1219                }
1220                isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1221        }
1222        return total;
1223}
1224
1225static int
1226isdn_tty_write_room(struct tty_struct *tty)
1227{
1228        modem_info *info = (modem_info *) tty->driver_data;
1229        int ret;
1230
1231        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room"))
1232                return 0;
1233        if (!info->online)
1234                return info->xmit_size;
1235        ret = info->xmit_size - info->xmit_count;
1236        return (ret < 0) ? 0 : ret;
1237}
1238
1239static int
1240isdn_tty_chars_in_buffer(struct tty_struct *tty)
1241{
1242        modem_info *info = (modem_info *) tty->driver_data;
1243
1244        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer"))
1245                return 0;
1246        if (!info->online)
1247                return 0;
1248        return (info->xmit_count);
1249}
1250
1251static void
1252isdn_tty_flush_buffer(struct tty_struct *tty)
1253{
1254        modem_info *info;
1255
1256        if (!tty) {
1257                return;
1258        }
1259        info = (modem_info *) tty->driver_data;
1260        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) {
1261                return;
1262        }
1263        isdn_tty_cleanup_xmit(info);
1264        info->xmit_count = 0;
1265        tty_wakeup(tty);
1266}
1267
1268static void
1269isdn_tty_flush_chars(struct tty_struct *tty)
1270{
1271        modem_info *info = (modem_info *) tty->driver_data;
1272
1273        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars"))
1274                return;
1275        if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue))
1276                isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1277}
1278
1279/*
1280 * ------------------------------------------------------------
1281 * isdn_tty_throttle()
1282 *
1283 * This routine is called by the upper-layer tty layer to signal that
1284 * incoming characters should be throttled.
1285 * ------------------------------------------------------------
1286 */
1287static void
1288isdn_tty_throttle(struct tty_struct *tty)
1289{
1290        modem_info *info = (modem_info *) tty->driver_data;
1291
1292        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle"))
1293                return;
1294        if (I_IXOFF(tty))
1295                info->x_char = STOP_CHAR(tty);
1296        info->mcr &= ~UART_MCR_RTS;
1297}
1298
1299static void
1300isdn_tty_unthrottle(struct tty_struct *tty)
1301{
1302        modem_info *info = (modem_info *) tty->driver_data;
1303
1304        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle"))
1305                return;
1306        if (I_IXOFF(tty)) {
1307                if (info->x_char)
1308                        info->x_char = 0;
1309                else
1310                        info->x_char = START_CHAR(tty);
1311        }
1312        info->mcr |= UART_MCR_RTS;
1313}
1314
1315/*
1316 * ------------------------------------------------------------
1317 * isdn_tty_ioctl() and friends
1318 * ------------------------------------------------------------
1319 */
1320
1321/*
1322 * isdn_tty_get_lsr_info - get line status register info
1323 *
1324 * Purpose: Let user call ioctl() to get info when the UART physically
1325 *          is emptied.  On bus types like RS485, the transmitter must
1326 *          release the bus after transmitting. This must be done when
1327 *          the transmit shift register is empty, not be done when the
1328 *          transmit holding register is empty.  This functionality
1329 *          allows RS485 driver to be written in user space.
1330 */
1331static int
1332isdn_tty_get_lsr_info(modem_info *info, uint __user *value)
1333{
1334        u_char status;
1335        uint result;
1336
1337        status = info->lsr;
1338        result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1339        return put_user(result, value);
1340}
1341
1342
1343static int
1344isdn_tty_tiocmget(struct tty_struct *tty)
1345{
1346        modem_info *info = (modem_info *) tty->driver_data;
1347        u_char control, status;
1348
1349        if (isdn_tty_paranoia_check(info, tty->name, __func__))
1350                return -ENODEV;
1351        if (tty_io_error(tty))
1352                return -EIO;
1353
1354        mutex_lock(&modem_info_mutex);
1355#ifdef ISDN_DEBUG_MODEM_IOCTL
1356        printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line);
1357#endif
1358
1359        control = info->mcr;
1360        status = info->msr;
1361        mutex_unlock(&modem_info_mutex);
1362        return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
1363                | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
1364                | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
1365                | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
1366                | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
1367                | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1368}
1369
1370static int
1371isdn_tty_tiocmset(struct tty_struct *tty,
1372                  unsigned int set, unsigned int clear)
1373{
1374        modem_info *info = (modem_info *) tty->driver_data;
1375
1376        if (isdn_tty_paranoia_check(info, tty->name, __func__))
1377                return -ENODEV;
1378        if (tty_io_error(tty))
1379                return -EIO;
1380
1381#ifdef ISDN_DEBUG_MODEM_IOCTL
1382        printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear);
1383#endif
1384
1385        mutex_lock(&modem_info_mutex);
1386        if (set & TIOCM_RTS)
1387                info->mcr |= UART_MCR_RTS;
1388        if (set & TIOCM_DTR) {
1389                info->mcr |= UART_MCR_DTR;
1390                isdn_tty_modem_ncarrier(info);
1391        }
1392
1393        if (clear & TIOCM_RTS)
1394                info->mcr &= ~UART_MCR_RTS;
1395        if (clear & TIOCM_DTR) {
1396                info->mcr &= ~UART_MCR_DTR;
1397                if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1398                        isdn_tty_modem_reset_regs(info, 0);
1399#ifdef ISDN_DEBUG_MODEM_HUP
1400                        printk(KERN_DEBUG "Mhup in TIOCMSET\n");
1401#endif
1402                        if (info->online)
1403                                info->ncarrier = 1;
1404                        isdn_tty_modem_hup(info, 1);
1405                }
1406        }
1407        mutex_unlock(&modem_info_mutex);
1408        return 0;
1409}
1410
1411static int
1412isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg)
1413{
1414        modem_info *info = (modem_info *) tty->driver_data;
1415        int retval;
1416
1417        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl"))
1418                return -ENODEV;
1419        if (tty_io_error(tty))
1420                return -EIO;
1421        switch (cmd) {
1422        case TCSBRK:   /* SVID version: non-zero arg --> no break */
1423#ifdef ISDN_DEBUG_MODEM_IOCTL
1424                printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line);
1425#endif
1426                retval = tty_check_change(tty);
1427                if (retval)
1428                        return retval;
1429                tty_wait_until_sent(tty, 0);
1430                return 0;
1431        case TCSBRKP:  /* support for POSIX tcsendbreak() */
1432#ifdef ISDN_DEBUG_MODEM_IOCTL
1433                printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line);
1434#endif
1435                retval = tty_check_change(tty);
1436                if (retval)
1437                        return retval;
1438                tty_wait_until_sent(tty, 0);
1439                return 0;
1440        case TIOCSERGETLSR:     /* Get line status register */
1441#ifdef ISDN_DEBUG_MODEM_IOCTL
1442                printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
1443#endif
1444                return isdn_tty_get_lsr_info(info, (uint __user *) arg);
1445        default:
1446#ifdef ISDN_DEBUG_MODEM_IOCTL
1447                printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
1448#endif
1449                return -ENOIOCTLCMD;
1450        }
1451        return 0;
1452}
1453
1454static void
1455isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1456{
1457        modem_info *info = (modem_info *) tty->driver_data;
1458
1459        if (!old_termios)
1460                isdn_tty_change_speed(info);
1461        else {
1462                if (tty->termios.c_cflag == old_termios->c_cflag &&
1463                    tty->termios.c_ispeed == old_termios->c_ispeed &&
1464                    tty->termios.c_ospeed == old_termios->c_ospeed)
1465                        return;
1466                isdn_tty_change_speed(info);
1467        }
1468}
1469
1470/*
1471 * ------------------------------------------------------------
1472 * isdn_tty_open() and friends
1473 * ------------------------------------------------------------
1474 */
1475
1476static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty)
1477{
1478        modem_info *info = &dev->mdm.info[tty->index];
1479
1480        if (isdn_tty_paranoia_check(info, tty->name, __func__))
1481                return -ENODEV;
1482
1483        tty->driver_data = info;
1484
1485        return tty_port_install(&info->port, driver, tty);
1486}
1487
1488/*
1489 * This routine is called whenever a serial port is opened.  It
1490 * enables interrupts for a serial port, linking in its async structure into
1491 * the IRQ chain.   It also performs the serial-specific
1492 * initialization for the tty structure.
1493 */
1494static int
1495isdn_tty_open(struct tty_struct *tty, struct file *filp)
1496{
1497        modem_info *info = tty->driver_data;
1498        struct tty_port *port = &info->port;
1499        int retval;
1500
1501#ifdef ISDN_DEBUG_MODEM_OPEN
1502        printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
1503               port->count);
1504#endif
1505        port->count++;
1506        port->tty = tty;
1507        /*
1508         * Start up serial port
1509         */
1510        retval = isdn_tty_startup(info);
1511        if (retval) {
1512#ifdef ISDN_DEBUG_MODEM_OPEN
1513                printk(KERN_DEBUG "isdn_tty_open return after startup\n");
1514#endif
1515                return retval;
1516        }
1517        retval = tty_port_block_til_ready(port, tty, filp);
1518        if (retval) {
1519#ifdef ISDN_DEBUG_MODEM_OPEN
1520                printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
1521#endif
1522                return retval;
1523        }
1524#ifdef ISDN_DEBUG_MODEM_OPEN
1525        printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line);
1526#endif
1527        dev->modempoll++;
1528#ifdef ISDN_DEBUG_MODEM_OPEN
1529        printk(KERN_DEBUG "isdn_tty_open normal exit\n");
1530#endif
1531        return 0;
1532}
1533
1534static void
1535isdn_tty_close(struct tty_struct *tty, struct file *filp)
1536{
1537        modem_info *info = (modem_info *) tty->driver_data;
1538        struct tty_port *port = &info->port;
1539        ulong timeout;
1540
1541        if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
1542                return;
1543        if (tty_hung_up_p(filp)) {
1544#ifdef ISDN_DEBUG_MODEM_OPEN
1545                printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n");
1546#endif
1547                return;
1548        }
1549        if ((tty->count == 1) && (port->count != 1)) {
1550                /*
1551                 * Uh, oh.  tty->count is 1, which means that the tty
1552                 * structure will be freed.  Info->count should always
1553                 * be one in these conditions.  If it's greater than
1554                 * one, we've got real problems, since it means the
1555                 * serial port won't be shutdown.
1556                 */
1557                printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
1558                       "info->count is %d\n", port->count);
1559                port->count = 1;
1560        }
1561        if (--port->count < 0) {
1562                printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
1563                       info->line, port->count);
1564                port->count = 0;
1565        }
1566        if (port->count) {
1567#ifdef ISDN_DEBUG_MODEM_OPEN
1568                printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
1569#endif
1570                return;
1571        }
1572        info->closing = 1;
1573
1574        tty->closing = 1;
1575        /*
1576         * At this point we stop accepting input.  To do this, we
1577         * disable the receive line status interrupts, and tell the
1578         * interrupt driver to stop checking the data ready bit in the
1579         * line status register.
1580         */
1581        if (tty_port_initialized(port)) {
1582                tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
1583                /*
1584                 * Before we drop DTR, make sure the UART transmitter
1585                 * has completely drained; this is especially
1586                 * important if there is a transmit FIFO!
1587                 */
1588                timeout = jiffies + HZ;
1589                while (!(info->lsr & UART_LSR_TEMT)) {
1590                        schedule_timeout_interruptible(20);
1591                        if (time_after(jiffies, timeout))
1592                                break;
1593                }
1594        }
1595        dev->modempoll--;
1596        isdn_tty_shutdown(info);
1597        isdn_tty_flush_buffer(tty);
1598        tty_ldisc_flush(tty);
1599        port->tty = NULL;
1600        info->ncarrier = 0;
1601
1602        tty_port_close_end(port, tty);
1603        info->closing = 0;
1604#ifdef ISDN_DEBUG_MODEM_OPEN
1605        printk(KERN_DEBUG "isdn_tty_close normal exit\n");
1606#endif
1607}
1608
1609/*
1610 * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled.
1611 */
1612static void
1613isdn_tty_hangup(struct tty_struct *tty)
1614{
1615        modem_info *info = (modem_info *) tty->driver_data;
1616        struct tty_port *port = &info->port;
1617
1618        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
1619                return;
1620        isdn_tty_shutdown(info);
1621        port->count = 0;
1622        tty_port_set_active(port, 0);
1623        port->tty = NULL;
1624        wake_up_interruptible(&port->open_wait);
1625}
1626
1627/* This routine initializes all emulator-data.
1628 */
1629static void
1630isdn_tty_reset_profile(atemu *m)
1631{
1632        m->profile[0] = 0;
1633        m->profile[1] = 0;
1634        m->profile[2] = 43;
1635        m->profile[3] = 13;
1636        m->profile[4] = 10;
1637        m->profile[5] = 8;
1638        m->profile[6] = 3;
1639        m->profile[7] = 60;
1640        m->profile[8] = 2;
1641        m->profile[9] = 6;
1642        m->profile[10] = 7;
1643        m->profile[11] = 70;
1644        m->profile[12] = 0x45;
1645        m->profile[13] = 4;
1646        m->profile[14] = ISDN_PROTO_L2_X75I;
1647        m->profile[15] = ISDN_PROTO_L3_TRANS;
1648        m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16;
1649        m->profile[17] = ISDN_MODEM_WINSIZE;
1650        m->profile[18] = 4;
1651        m->profile[19] = 0;
1652        m->profile[20] = 0;
1653        m->profile[23] = 0;
1654        m->pmsn[0] = '\0';
1655        m->plmsn[0] = '\0';
1656}
1657
1658#ifdef CONFIG_ISDN_AUDIO
1659static void
1660isdn_tty_modem_reset_vpar(atemu *m)
1661{
1662        m->vpar[0] = 2;         /* Voice-device            (2 = phone line) */
1663        m->vpar[1] = 0;         /* Silence detection level (0 = none      ) */
1664        m->vpar[2] = 70;        /* Silence interval        (7 sec.        ) */
1665        m->vpar[3] = 2;         /* Compression type        (1 = ADPCM-2   ) */
1666        m->vpar[4] = 0;         /* DTMF detection level    (0 = softcode  ) */
1667        m->vpar[5] = 8;         /* DTMF interval           (8 * 5 ms.     ) */
1668}
1669#endif
1670
1671#ifdef CONFIG_ISDN_TTY_FAX
1672static void
1673isdn_tty_modem_reset_faxpar(modem_info *info)
1674{
1675        T30_s *f = info->fax;
1676
1677        f->code = 0;
1678        f->phase = ISDN_FAX_PHASE_IDLE;
1679        f->direction = 0;
1680        f->resolution = 1;      /* fine */
1681        f->rate = 5;            /* 14400 bit/s */
1682        f->width = 0;
1683        f->length = 0;
1684        f->compression = 0;
1685        f->ecm = 0;
1686        f->binary = 0;
1687        f->scantime = 0;
1688        memset(&f->id[0], 32, FAXIDLEN - 1);
1689        f->id[FAXIDLEN - 1] = 0;
1690        f->badlin = 0;
1691        f->badmul = 0;
1692        f->bor = 0;
1693        f->nbc = 0;
1694        f->cq = 0;
1695        f->cr = 0;
1696        f->ctcrty = 0;
1697        f->minsp = 0;
1698        f->phcto = 30;
1699        f->rel = 0;
1700        memset(&f->pollid[0], 32, FAXIDLEN - 1);
1701        f->pollid[FAXIDLEN - 1] = 0;
1702}
1703#endif
1704
1705static void
1706isdn_tty_modem_reset_regs(modem_info *info, int force)
1707{
1708        atemu *m = &info->emu;
1709        if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) {
1710                memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG);
1711                memcpy(m->msn, m->pmsn, ISDN_MSNLEN);
1712                memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN);
1713                info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
1714        }
1715#ifdef CONFIG_ISDN_AUDIO
1716        isdn_tty_modem_reset_vpar(m);
1717#endif
1718#ifdef CONFIG_ISDN_TTY_FAX
1719        isdn_tty_modem_reset_faxpar(info);
1720#endif
1721        m->mdmcmdl = 0;
1722}
1723
1724static void
1725modem_write_profile(atemu *m)
1726{
1727        memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG);
1728        memcpy(m->pmsn, m->msn, ISDN_MSNLEN);
1729        memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN);
1730        if (dev->profd)
1731                send_sig(SIGIO, dev->profd, 1);
1732}
1733
1734static const struct tty_operations modem_ops = {
1735        .install = isdn_tty_install,
1736        .open = isdn_tty_open,
1737        .close = isdn_tty_close,
1738        .write = isdn_tty_write,
1739        .flush_chars = isdn_tty_flush_chars,
1740        .write_room = isdn_tty_write_room,
1741        .chars_in_buffer = isdn_tty_chars_in_buffer,
1742        .flush_buffer = isdn_tty_flush_buffer,
1743        .ioctl = isdn_tty_ioctl,
1744        .throttle = isdn_tty_throttle,
1745        .unthrottle = isdn_tty_unthrottle,
1746        .set_termios = isdn_tty_set_termios,
1747        .hangup = isdn_tty_hangup,
1748        .tiocmget = isdn_tty_tiocmget,
1749        .tiocmset = isdn_tty_tiocmset,
1750};
1751
1752static int isdn_tty_carrier_raised(struct tty_port *port)
1753{
1754        modem_info *info = container_of(port, modem_info, port);
1755        return info->msr & UART_MSR_DCD;
1756}
1757
1758static const struct tty_port_operations isdn_tty_port_ops = {
1759        .carrier_raised = isdn_tty_carrier_raised,
1760};
1761
1762int
1763isdn_tty_modem_init(void)
1764{
1765        isdn_modem_t    *m;
1766        int             i, retval;
1767        modem_info      *info;
1768
1769        m = &dev->mdm;
1770        m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS);
1771        if (!m->tty_modem)
1772                return -ENOMEM;
1773        m->tty_modem->name = "ttyI";
1774        m->tty_modem->major = ISDN_TTY_MAJOR;
1775        m->tty_modem->minor_start = 0;
1776        m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL;
1777        m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
1778        m->tty_modem->init_termios = tty_std_termios;
1779        m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1780        m->tty_modem->flags = TTY_DRIVER_REAL_RAW;
1781        m->tty_modem->driver_name = "isdn_tty";
1782        tty_set_operations(m->tty_modem, &modem_ops);
1783        retval = tty_register_driver(m->tty_modem);
1784        if (retval) {
1785                printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n");
1786                goto err;
1787        }
1788        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1789                info = &m->info[i];
1790#ifdef CONFIG_ISDN_TTY_FAX
1791                if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) {
1792                        printk(KERN_ERR "Could not allocate fax t30-buffer\n");
1793                        retval = -ENOMEM;
1794                        goto err_unregister;
1795                }
1796#endif
1797                tty_port_init(&info->port);
1798                info->port.ops = &isdn_tty_port_ops;
1799                spin_lock_init(&info->readlock);
1800                sprintf(info->last_cause, "0000");
1801                sprintf(info->last_num, "none");
1802                info->last_dir = 0;
1803                info->last_lhup = 1;
1804                info->last_l2 = -1;
1805                info->last_si = 0;
1806                isdn_tty_reset_profile(&info->emu);
1807                isdn_tty_modem_reset_regs(info, 1);
1808                info->magic = ISDN_ASYNC_MAGIC;
1809                info->line = i;
1810                info->x_char = 0;
1811                info->isdn_driver = -1;
1812                info->isdn_channel = -1;
1813                info->drv_index = -1;
1814                info->xmit_size = ISDN_SERIAL_XMIT_SIZE;
1815                setup_timer(&info->nc_timer, isdn_tty_modem_do_ncarrier,
1816                            (unsigned long)info);
1817                skb_queue_head_init(&info->xmit_queue);
1818#ifdef CONFIG_ISDN_AUDIO
1819                skb_queue_head_init(&info->dtmf_queue);
1820#endif
1821                info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5,
1822                                GFP_KERNEL);
1823                if (!info->port.xmit_buf) {
1824                        printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
1825                        retval = -ENOMEM;
1826                        goto err_unregister;
1827                }
1828                /* Make room for T.70 header */
1829                info->port.xmit_buf += 4;
1830        }
1831        return 0;
1832err_unregister:
1833        for (i--; i >= 0; i--) {
1834                info = &m->info[i];
1835#ifdef CONFIG_ISDN_TTY_FAX
1836                kfree(info->fax);
1837#endif
1838                kfree(info->port.xmit_buf - 4);
1839                info->port.xmit_buf = NULL;
1840                tty_port_destroy(&info->port);
1841        }
1842        tty_unregister_driver(m->tty_modem);
1843err:
1844        put_tty_driver(m->tty_modem);
1845        m->tty_modem = NULL;
1846        return retval;
1847}
1848
1849void
1850isdn_tty_exit(void)
1851{
1852        modem_info *info;
1853        int i;
1854
1855        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1856                info = &dev->mdm.info[i];
1857                isdn_tty_cleanup_xmit(info);
1858#ifdef CONFIG_ISDN_TTY_FAX
1859                kfree(info->fax);
1860#endif
1861                kfree(info->port.xmit_buf - 4);
1862                info->port.xmit_buf = NULL;
1863                tty_port_destroy(&info->port);
1864        }
1865        tty_unregister_driver(dev->mdm.tty_modem);
1866        put_tty_driver(dev->mdm.tty_modem);
1867        dev->mdm.tty_modem = NULL;
1868}
1869
1870
1871/*
1872 * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx)
1873 *      match the MSN against the MSNs (glob patterns) defined for tty_emulator,
1874 *      and return 0 for match, 1 for no match, 2 if MSN could match if longer.
1875 */
1876
1877static int
1878isdn_tty_match_icall(char *cid, atemu *emu, int di)
1879{
1880#ifdef ISDN_DEBUG_MODEM_ICALL
1881        printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n",
1882               emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di),
1883               emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]);
1884#endif
1885        if (strlen(emu->lmsn)) {
1886                char *p = emu->lmsn;
1887                char *q;
1888                int  tmp;
1889                int  ret = 0;
1890
1891                while (1) {
1892                        if ((q = strchr(p, ';')))
1893                                *q = '\0';
1894                        if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret)
1895                                ret = tmp;
1896#ifdef ISDN_DEBUG_MODEM_ICALL
1897                        printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n",
1898                               p, isdn_map_eaz2msn(emu->msn, di), tmp);
1899#endif
1900                        if (q) {
1901                                *q = ';';
1902                                p = q;
1903                                p++;
1904                        }
1905                        if (!tmp)
1906                                return 0;
1907                        if (!q)
1908                                break;
1909                }
1910                return ret;
1911        } else {
1912                int tmp;
1913                tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di));
1914#ifdef ISDN_DEBUG_MODEM_ICALL
1915                printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n",
1916                       isdn_map_eaz2msn(emu->msn, di), tmp);
1917#endif
1918                return tmp;
1919        }
1920}
1921
1922/*
1923 * An incoming call-request has arrived.
1924 * Search the tty-devices for an appropriate device and bind
1925 * it to the ISDN-Channel.
1926 * Return:
1927 *
1928 *  0 = No matching device found.
1929 *  1 = A matching device found.
1930 *  3 = No match found, but eventually would match, if
1931 *      CID is longer.
1932 */
1933int
1934isdn_tty_find_icall(int di, int ch, setup_parm *setup)
1935{
1936        char *eaz;
1937        int i;
1938        int wret;
1939        int idx;
1940        int si1;
1941        int si2;
1942        char *nr;
1943        ulong flags;
1944
1945        if (!setup->phone[0]) {
1946                nr = "0";
1947                printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n");
1948        } else
1949                nr = setup->phone;
1950        si1 = (int) setup->si1;
1951        si2 = (int) setup->si2;
1952        if (!setup->eazmsn[0]) {
1953                printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n");
1954                eaz = "0";
1955        } else
1956                eaz = setup->eazmsn;
1957#ifdef ISDN_DEBUG_MODEM_ICALL
1958        printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2);
1959#endif
1960        wret = 0;
1961        spin_lock_irqsave(&dev->lock, flags);
1962        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1963                modem_info *info = &dev->mdm.info[i];
1964
1965                if (info->port.count == 0)
1966                        continue;
1967                if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) &&  /* SI1 is matching */
1968                    (info->emu.mdmreg[REG_SI2] == si2)) {         /* SI2 is matching */
1969                        idx = isdn_dc2minor(di, ch);
1970#ifdef ISDN_DEBUG_MODEM_ICALL
1971                        printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
1972                        printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
1973                               info->port.flags, info->isdn_driver,
1974                               info->isdn_channel, dev->usage[idx]);
1975#endif
1976                        if (
1977#ifndef FIX_FILE_TRANSFER
1978                            tty_port_active(&info->port) &&
1979#endif
1980                                (info->isdn_driver == -1) &&
1981                                (info->isdn_channel == -1) &&
1982                                (USG_NONE(dev->usage[idx]))) {
1983                                int matchret;
1984
1985                                if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret)
1986                                        wret = matchret;
1987                                if (!matchret) {                  /* EAZ is matching */
1988                                        info->isdn_driver = di;
1989                                        info->isdn_channel = ch;
1990                                        info->drv_index = idx;
1991                                        dev->m_idx[idx] = info->line;
1992                                        dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE;
1993                                        dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]);
1994                                        strcpy(dev->num[idx], nr);
1995                                        strcpy(info->emu.cpn, eaz);
1996                                        info->emu.mdmreg[REG_SI1I] = si2bit[si1];
1997                                        info->emu.mdmreg[REG_PLAN] = setup->plan;
1998                                        info->emu.mdmreg[REG_SCREEN] = setup->screen;
1999                                        isdn_info_update();
2000                                        spin_unlock_irqrestore(&dev->lock, flags);
2001                                        printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr,
2002                                               info->line);
2003                                        info->msr |= UART_MSR_RI;
2004                                        isdn_tty_modem_result(RESULT_RING, info);
2005                                        isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1);
2006                                        return 1;
2007                                }
2008                        }
2009                }
2010        }
2011        spin_unlock_irqrestore(&dev->lock, flags);
2012        printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz,
2013               ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2)) ? "rejected" : "ignored");
2014        return (wret == 2) ? 3 : 0;
2015}
2016
2017int
2018isdn_tty_stat_callback(int i, isdn_ctrl *c)
2019{
2020        int mi;
2021        modem_info *info;
2022        char *e;
2023
2024        if (i < 0)
2025                return 0;
2026        if ((mi = dev->m_idx[i]) >= 0) {
2027                info = &dev->mdm.info[mi];
2028                switch (c->command) {
2029                case ISDN_STAT_CINF:
2030                        printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num);
2031                        info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10);
2032                        if (e == (char *)c->parm.num)
2033                                info->emu.charge = 0;
2034
2035                        break;
2036                case ISDN_STAT_BSENT:
2037#ifdef ISDN_TTY_STAT_DEBUG
2038                        printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line);
2039#endif
2040                        if ((info->isdn_driver == c->driver) &&
2041                            (info->isdn_channel == c->arg)) {
2042                                info->msr |= UART_MSR_CTS;
2043                                if (info->send_outstanding)
2044                                        if (!(--info->send_outstanding))
2045                                                info->lsr |= UART_LSR_TEMT;
2046                                isdn_tty_tint(info);
2047                                return 1;
2048                        }
2049                        break;
2050                case ISDN_STAT_CAUSE:
2051#ifdef ISDN_TTY_STAT_DEBUG
2052                        printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line);
2053#endif
2054                        /* Signal cause to tty-device */
2055                        strncpy(info->last_cause, c->parm.num, 5);
2056                        return 1;
2057                case ISDN_STAT_DISPLAY:
2058#ifdef ISDN_TTY_STAT_DEBUG
2059                        printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line);
2060#endif
2061                        /* Signal display to tty-device */
2062                        if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) &&
2063                            !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) {
2064                                isdn_tty_at_cout("\r\n", info);
2065                                isdn_tty_at_cout("DISPLAY: ", info);
2066                                isdn_tty_at_cout(c->parm.display, info);
2067                                isdn_tty_at_cout("\r\n", info);
2068                        }
2069                        return 1;
2070                case ISDN_STAT_DCONN:
2071#ifdef ISDN_TTY_STAT_DEBUG
2072                        printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
2073#endif
2074                        if (tty_port_active(&info->port)) {
2075                                if (info->dialing == 1) {
2076                                        info->dialing = 2;
2077                                        return 1;
2078                                }
2079                        }
2080                        break;
2081                case ISDN_STAT_DHUP:
2082#ifdef ISDN_TTY_STAT_DEBUG
2083                        printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line);
2084#endif
2085                        if (tty_port_active(&info->port)) {
2086                                if (info->dialing == 1)
2087                                        isdn_tty_modem_result(RESULT_BUSY, info);
2088                                if (info->dialing > 1)
2089                                        isdn_tty_modem_result(RESULT_NO_CARRIER, info);
2090                                info->dialing = 0;
2091#ifdef ISDN_DEBUG_MODEM_HUP
2092                                printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
2093#endif
2094                                isdn_tty_modem_hup(info, 0);
2095                                return 1;
2096                        }
2097                        break;
2098                case ISDN_STAT_BCONN:
2099#ifdef ISDN_TTY_STAT_DEBUG
2100                        printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line);
2101#endif
2102                        /* Wake up any processes waiting
2103                         * for incoming call of this device when
2104                         * DCD follow the state of incoming carrier
2105                         */
2106                        if (info->port.blocked_open &&
2107                            (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
2108                                wake_up_interruptible(&info->port.open_wait);
2109                        }
2110
2111                        /* Schedule CONNECT-Message to any tty
2112                         * waiting for it and
2113                         * set DCD-bit of its modem-status.
2114                         */
2115                        if (tty_port_active(&info->port) ||
2116                            (info->port.blocked_open &&
2117                             (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
2118                                info->msr |= UART_MSR_DCD;
2119                                info->emu.charge = 0;
2120                                if (info->dialing & 0xf)
2121                                        info->last_dir = 1;
2122                                else
2123                                        info->last_dir = 0;
2124                                info->dialing = 0;
2125                                info->rcvsched = 1;
2126                                if (USG_MODEM(dev->usage[i])) {
2127                                        if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) {
2128                                                strcpy(info->emu.connmsg, c->parm.num);
2129                                                isdn_tty_modem_result(RESULT_CONNECT, info);
2130                                        } else
2131                                                isdn_tty_modem_result(RESULT_CONNECT64000, info);
2132                                }
2133                                if (USG_VOICE(dev->usage[i]))
2134                                        isdn_tty_modem_result(RESULT_VCON, info);
2135                                return 1;
2136                        }
2137                        break;
2138                case ISDN_STAT_BHUP:
2139#ifdef ISDN_TTY_STAT_DEBUG
2140                        printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line);
2141#endif
2142                        if (tty_port_active(&info->port)) {
2143#ifdef ISDN_DEBUG_MODEM_HUP
2144                                printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
2145#endif
2146                                isdn_tty_modem_hup(info, 0);
2147                                return 1;
2148                        }
2149                        break;
2150                case ISDN_STAT_NODCH:
2151#ifdef ISDN_TTY_STAT_DEBUG
2152                        printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line);
2153#endif
2154                        if (tty_port_active(&info->port)) {
2155                                if (info->dialing) {
2156                                        info->dialing = 0;
2157                                        info->last_l2 = -1;
2158                                        info->last_si = 0;
2159                                        sprintf(info->last_cause, "0000");
2160                                        isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
2161                                }
2162                                isdn_tty_modem_hup(info, 0);
2163                                return 1;
2164                        }
2165                        break;
2166                case ISDN_STAT_UNLOAD:
2167#ifdef ISDN_TTY_STAT_DEBUG
2168                        printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line);
2169#endif
2170                        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
2171                                info = &dev->mdm.info[i];
2172                                if (info->isdn_driver == c->driver) {
2173                                        if (info->online)
2174                                                isdn_tty_modem_hup(info, 1);
2175                                }
2176                        }
2177                        return 1;
2178#ifdef CONFIG_ISDN_TTY_FAX
2179                case ISDN_STAT_FAXIND:
2180                        if (tty_port_active(&info->port)) {
2181                                isdn_tty_fax_command(info, c);
2182                        }
2183                        break;
2184#endif
2185#ifdef CONFIG_ISDN_AUDIO
2186                case ISDN_STAT_AUDIO:
2187                        if (tty_port_active(&info->port)) {
2188                                switch (c->parm.num[0]) {
2189                                case ISDN_AUDIO_DTMF:
2190                                        if (info->vonline) {
2191                                                isdn_audio_put_dle_code(info,
2192                                                                        c->parm.num[1]);
2193                                        }
2194                                        break;
2195                                }
2196                        }
2197                        break;
2198#endif
2199                }
2200        }
2201        return 0;
2202}
2203
2204/*********************************************************************
2205 Modem-Emulator-Routines
2206*********************************************************************/
2207
2208#define cmdchar(c) ((c >= ' ') && (c <= 0x7f))
2209
2210/*
2211 * Put a message from the AT-emulator into receive-buffer of tty,
2212 * convert CR, LF, and BS to values in modem-registers 3, 4 and 5.
2213 */
2214void
2215isdn_tty_at_cout(char *msg, modem_info *info)
2216{
2217        struct tty_port *port = &info->port;
2218        atemu *m = &info->emu;
2219        char *p;
2220        char c;
2221        u_long flags;
2222        struct sk_buff *skb = NULL;
2223        char *sp = NULL;
2224        int l;
2225
2226        if (!msg) {
2227                printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n");
2228                return;
2229        }
2230
2231        l = strlen(msg);
2232
2233        spin_lock_irqsave(&info->readlock, flags);
2234        if (info->closing) {
2235                spin_unlock_irqrestore(&info->readlock, flags);
2236                return;
2237        }
2238
2239        /* use queue instead of direct, if online and */
2240        /* data is in queue or buffer is full */
2241        if (info->online && ((tty_buffer_request_room(port, l) < l) ||
2242                             !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
2243                skb = alloc_skb(l, GFP_ATOMIC);
2244                if (!skb) {
2245                        spin_unlock_irqrestore(&info->readlock, flags);
2246                        return;
2247                }
2248                sp = skb_put(skb, l);
2249#ifdef CONFIG_ISDN_AUDIO
2250                ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
2251                ISDN_AUDIO_SKB_LOCK(skb) = 0;
2252#endif
2253        }
2254
2255        for (p = msg; *p; p++) {
2256                switch (*p) {
2257                case '\r':
2258                        c = m->mdmreg[REG_CR];
2259                        break;
2260                case '\n':
2261                        c = m->mdmreg[REG_LF];
2262                        break;
2263                case '\b':
2264                        c = m->mdmreg[REG_BS];
2265                        break;
2266                default:
2267                        c = *p;
2268                }
2269                if (skb) {
2270                        *sp++ = c;
2271                } else {
2272                        if (tty_insert_flip_char(port, c, TTY_NORMAL) == 0)
2273                                break;
2274                }
2275        }
2276        if (skb) {
2277                __skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb);
2278                dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len;
2279                spin_unlock_irqrestore(&info->readlock, flags);
2280                /* Schedule dequeuing */
2281                if (dev->modempoll && info->rcvsched)
2282                        isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
2283
2284        } else {
2285                spin_unlock_irqrestore(&info->readlock, flags);
2286                tty_flip_buffer_push(port);
2287        }
2288}
2289
2290/*
2291 * Perform ATH Hangup
2292 */
2293static void
2294isdn_tty_on_hook(modem_info *info)
2295{
2296        if (info->isdn_channel >= 0) {
2297#ifdef ISDN_DEBUG_MODEM_HUP
2298                printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n");
2299#endif
2300                isdn_tty_modem_hup(info, 1);
2301        }
2302}
2303
2304static void
2305isdn_tty_off_hook(void)
2306{
2307        printk(KERN_DEBUG "isdn_tty_off_hook\n");
2308}
2309
2310#define PLUSWAIT1 (HZ / 2)      /* 0.5 sec. */
2311#define PLUSWAIT2 (HZ * 3 / 2)  /* 1.5 sec */
2312
2313/*
2314 * Check Buffer for Modem-escape-sequence, activate timer-callback to
2315 * isdn_tty_modem_escape() if sequence found.
2316 *
2317 * Parameters:
2318 *   p          pointer to databuffer
2319 *   plus       escape-character
2320 *   count      length of buffer
2321 *   pluscount  count of valid escape-characters so far
2322 *   lastplus   timestamp of last character
2323 */
2324static void
2325isdn_tty_check_esc(const u_char *p, u_char plus, int count, int *pluscount,
2326                   u_long *lastplus)
2327{
2328        if (plus > 127)
2329                return;
2330        if (count > 3) {
2331                p += count - 3;
2332                count = 3;
2333                *pluscount = 0;
2334        }
2335        while (count > 0) {
2336                if (*(p++) == plus) {
2337                        if ((*pluscount)++) {
2338                                /* Time since last '+' > 0.5 sec. ? */
2339                                if (time_after(jiffies, *lastplus + PLUSWAIT1))
2340                                        *pluscount = 1;
2341                        } else {
2342                                /* Time since last non-'+' < 1.5 sec. ? */
2343                                if (time_before(jiffies, *lastplus + PLUSWAIT2))
2344                                        *pluscount = 0;
2345                        }
2346                        if ((*pluscount == 3) && (count == 1))
2347                                isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1);
2348                        if (*pluscount > 3)
2349                                *pluscount = 1;
2350                } else
2351                        *pluscount = 0;
2352                *lastplus = jiffies;
2353                count--;
2354        }
2355}
2356
2357/*
2358 * Return result of AT-emulator to tty-receive-buffer, depending on
2359 * modem-register 12, bit 0 and 1.
2360 * For CONNECT-messages also switch to online-mode.
2361 * For RING-message handle auto-ATA if register 0 != 0
2362 */
2363
2364static void
2365isdn_tty_modem_result(int code, modem_info *info)
2366{
2367        atemu *m = &info->emu;
2368        static char *msg[] =
2369                {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
2370                 "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
2371                 "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
2372        char s[ISDN_MSNLEN + 10];
2373
2374        switch (code) {
2375        case RESULT_RING:
2376                m->mdmreg[REG_RINGCNT]++;
2377                if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA])
2378                        /* Automatically accept incoming call */
2379                        isdn_tty_cmd_ATA(info);
2380                break;
2381        case RESULT_NO_CARRIER:
2382#ifdef ISDN_DEBUG_MODEM_HUP
2383                printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
2384                       info->closing, !info->port.tty);
2385#endif
2386                m->mdmreg[REG_RINGCNT] = 0;
2387                del_timer(&info->nc_timer);
2388                info->ncarrier = 0;
2389                if (info->closing || !info->port.tty)
2390                        return;
2391
2392#ifdef CONFIG_ISDN_AUDIO
2393                if (info->vonline & 1) {
2394#ifdef ISDN_DEBUG_MODEM_VOICE
2395                        printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
2396                               info->line);
2397#endif
2398                        /* voice-recording, add DLE-ETX */
2399                        isdn_tty_at_cout("\020\003", info);
2400                }
2401                if (info->vonline & 2) {
2402#ifdef ISDN_DEBUG_MODEM_VOICE
2403                        printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
2404                               info->line);
2405#endif
2406                        /* voice-playing, add DLE-DC4 */
2407                        isdn_tty_at_cout("\020\024", info);
2408                }
2409#endif
2410                break;
2411        case RESULT_CONNECT:
2412        case RESULT_CONNECT64000:
2413                sprintf(info->last_cause, "0000");
2414                if (!info->online)
2415                        info->online = 2;
2416                break;
2417        case RESULT_VCON:
2418#ifdef ISDN_DEBUG_MODEM_VOICE
2419                printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
2420                       info->line);
2421#endif
2422                sprintf(info->last_cause, "0000");
2423                if (!info->online)
2424                        info->online = 1;
2425                break;
2426        } /* switch (code) */
2427
2428        if (m->mdmreg[REG_RESP] & BIT_RESP) {
2429                /* Show results */
2430                if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) {
2431                        /* Show numeric results only */
2432                        sprintf(s, "\r\n%d\r\n", code);
2433                        isdn_tty_at_cout(s, info);
2434                } else {
2435                        if (code == RESULT_RING) {
2436                                /* return if "show RUNG" and ringcounter>1 */
2437                                if ((m->mdmreg[REG_RUNG] & BIT_RUNG) &&
2438                                    (m->mdmreg[REG_RINGCNT] > 1))
2439                                        return;
2440                                /* print CID, _before_ _every_ ring */
2441                                if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) {
2442                                        isdn_tty_at_cout("\r\nCALLER NUMBER: ", info);
2443                                        isdn_tty_at_cout(dev->num[info->drv_index], info);
2444                                        if (m->mdmreg[REG_CDN] & BIT_CDN) {
2445                                                isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2446                                                isdn_tty_at_cout(info->emu.cpn, info);
2447                                        }
2448                                }
2449                        }
2450                        isdn_tty_at_cout("\r\n", info);
2451                        isdn_tty_at_cout(msg[code], info);
2452                        switch (code) {
2453                        case RESULT_CONNECT:
2454                                switch (m->mdmreg[REG_L2PROT]) {
2455                                case ISDN_PROTO_L2_MODEM:
2456                                        isdn_tty_at_cout(" ", info);
2457                                        isdn_tty_at_cout(m->connmsg, info);
2458                                        break;
2459                                }
2460                                break;
2461                        case RESULT_RING:
2462                                /* Append CPN, if enabled */
2463                                if ((m->mdmreg[REG_CPN] & BIT_CPN)) {
2464                                        sprintf(s, "/%s", m->cpn);
2465                                        isdn_tty_at_cout(s, info);
2466                                }
2467                                /* Print CID only once, _after_ 1st RING */
2468                                if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) &&
2469                                    (m->mdmreg[REG_RINGCNT] == 1)) {
2470                                        isdn_tty_at_cout("\r\n", info);
2471                                        isdn_tty_at_cout("CALLER NUMBER: ", info);
2472                                        isdn_tty_at_cout(dev->num[info->drv_index], info);
2473                                        if (m->mdmreg[REG_CDN] & BIT_CDN) {
2474                                                isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2475                                                isdn_tty_at_cout(info->emu.cpn, info);
2476                                        }
2477                                }
2478                                break;
2479                        case RESULT_NO_CARRIER:
2480                        case RESULT_NO_DIALTONE:
2481                        case RESULT_BUSY:
2482                        case RESULT_NO_ANSWER:
2483                                m->mdmreg[REG_RINGCNT] = 0;
2484                                /* Append Cause-Message if enabled */
2485                                if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) {
2486                                        sprintf(s, "/%s", info->last_cause);
2487                                        isdn_tty_at_cout(s, info);
2488                                }
2489                                break;
2490                        case RESULT_CONNECT64000:
2491                                /* Append Protocol to CONNECT message */
2492                                switch (m->mdmreg[REG_L2PROT]) {
2493                                case ISDN_PROTO_L2_X75I:
2494                                case ISDN_PROTO_L2_X75UI:
2495                                case ISDN_PROTO_L2_X75BUI:
2496                                        isdn_tty_at_cout("/X.75", info);
2497                                        break;
2498                                case ISDN_PROTO_L2_HDLC:
2499                                        isdn_tty_at_cout("/HDLC", info);
2500                                        break;
2501                                case ISDN_PROTO_L2_V11096:
2502                                        isdn_tty_at_cout("/V110/9600", info);
2503                                        break;
2504                                case ISDN_PROTO_L2_V11019:
2505                                        isdn_tty_at_cout("/V110/19200", info);
2506                                        break;
2507                                case ISDN_PROTO_L2_V11038:
2508                                        isdn_tty_at_cout("/V110/38400", info);
2509                                        break;
2510                                }
2511                                if (m->mdmreg[REG_T70] & BIT_T70) {
2512                                        isdn_tty_at_cout("/T.70", info);
2513                                        if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2514                                                isdn_tty_at_cout("+", info);
2515                                }
2516                                break;
2517                        }
2518                        isdn_tty_at_cout("\r\n", info);
2519                }
2520        }
2521        if (code == RESULT_NO_CARRIER) {
2522                if (info->closing || (!info->port.tty))
2523                        return;
2524
2525                if (tty_port_check_carrier(&info->port))
2526                        tty_hangup(info->port.tty);
2527        }
2528}
2529
2530
2531/*
2532 * Display a modem-register-value.
2533 */
2534static void
2535isdn_tty_show_profile(int ridx, modem_info *info)
2536{
2537        char v[6];
2538
2539        sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]);
2540        isdn_tty_at_cout(v, info);
2541}
2542
2543/*
2544 * Get MSN-string from char-pointer, set pointer to end of number
2545 */
2546static void
2547isdn_tty_get_msnstr(char *n, char **p)
2548{
2549        int limit = ISDN_MSNLEN - 1;
2550
2551        while (((*p[0] >= '0' && *p[0] <= '9') ||
2552                /* Why a comma ??? */
2553                (*p[0] == ',') || (*p[0] == ':')) &&
2554               (limit--))
2555                *n++ = *p[0]++;
2556        *n = '\0';
2557}
2558
2559/*
2560 * Get phone-number from modem-commandbuffer
2561 */
2562static void
2563isdn_tty_getdial(char *p, char *q, int cnt)
2564{
2565        int first = 1;
2566        int limit = ISDN_MSNLEN - 1;    /* MUST match the size of interface var to avoid
2567                                           buffer overflow */
2568
2569        while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt > 0) {
2570                if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) ||
2571                    ((*p == 'R') && first) ||
2572                    (*p == '*') || (*p == '#')) {
2573                        *q++ = *p;
2574                        limit--;
2575                }
2576                if (!limit)
2577                        break;
2578                p++;
2579                first = 0;
2580        }
2581        *q = 0;
2582}
2583
2584#define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; }
2585#define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; }
2586
2587static void
2588isdn_tty_report(modem_info *info)
2589{
2590        atemu *m = &info->emu;
2591        char s[80];
2592
2593        isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info);
2594        sprintf(s, "    Remote Number:    %s\r\n", info->last_num);
2595        isdn_tty_at_cout(s, info);
2596        sprintf(s, "    Direction:        %s\r\n", info->last_dir ? "outgoing" : "incoming");
2597        isdn_tty_at_cout(s, info);
2598        isdn_tty_at_cout("    Layer-2 Protocol: ", info);
2599        switch (info->last_l2) {
2600        case ISDN_PROTO_L2_X75I:
2601                isdn_tty_at_cout("X.75i", info);
2602                break;
2603        case ISDN_PROTO_L2_X75UI:
2604                isdn_tty_at_cout("X.75ui", info);
2605                break;
2606        case ISDN_PROTO_L2_X75BUI:
2607                isdn_tty_at_cout("X.75bui", info);
2608                break;
2609        case ISDN_PROTO_L2_HDLC:
2610                isdn_tty_at_cout("HDLC", info);
2611                break;
2612        case ISDN_PROTO_L2_V11096:
2613                isdn_tty_at_cout("V.110 9600 Baud", info);
2614                break;
2615        case ISDN_PROTO_L2_V11019:
2616                isdn_tty_at_cout("V.110 19200 Baud", info);
2617                break;
2618        case ISDN_PROTO_L2_V11038:
2619                isdn_tty_at_cout("V.110 38400 Baud", info);
2620                break;
2621        case ISDN_PROTO_L2_TRANS:
2622                isdn_tty_at_cout("transparent", info);
2623                break;
2624        case ISDN_PROTO_L2_MODEM:
2625                isdn_tty_at_cout("modem", info);
2626                break;
2627        case ISDN_PROTO_L2_FAX:
2628                isdn_tty_at_cout("fax", info);
2629                break;
2630        default:
2631                isdn_tty_at_cout("unknown", info);
2632                break;
2633        }
2634        if (m->mdmreg[REG_T70] & BIT_T70) {
2635                isdn_tty_at_cout("/T.70", info);
2636                if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2637                        isdn_tty_at_cout("+", info);
2638        }
2639        isdn_tty_at_cout("\r\n", info);
2640        isdn_tty_at_cout("    Service:          ", info);
2641        switch (info->last_si) {
2642        case 1:
2643                isdn_tty_at_cout("audio\r\n", info);
2644                break;
2645        case 5:
2646                isdn_tty_at_cout("btx\r\n", info);
2647                break;
2648        case 7:
2649                isdn_tty_at_cout("data\r\n", info);
2650                break;
2651        default:
2652                sprintf(s, "%d\r\n", info->last_si);
2653                isdn_tty_at_cout(s, info);
2654                break;
2655        }
2656        sprintf(s, "    Hangup location:  %s\r\n", info->last_lhup ? "local" : "remote");
2657        isdn_tty_at_cout(s, info);
2658        sprintf(s, "    Last cause:       %s\r\n", info->last_cause);
2659        isdn_tty_at_cout(s, info);
2660}
2661
2662/*
2663 * Parse AT&.. commands.
2664 */
2665static int
2666isdn_tty_cmd_ATand(char **p, modem_info *info)
2667{
2668        atemu *m = &info->emu;
2669        int i;
2670        char rb[100];
2671
2672#define MAXRB (sizeof(rb) - 1)
2673
2674        switch (*p[0]) {
2675        case 'B':
2676                /* &B - Set Buffersize */
2677                p[0]++;
2678                i = isdn_getnum(p);
2679                if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX))
2680                        PARSE_ERROR1;
2681#ifdef CONFIG_ISDN_AUDIO
2682                if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF))
2683                        PARSE_ERROR1;
2684#endif
2685                m->mdmreg[REG_PSIZE] = i / 16;
2686                info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2687                switch (m->mdmreg[REG_L2PROT]) {
2688                case ISDN_PROTO_L2_V11096:
2689                case ISDN_PROTO_L2_V11019:
2690                case ISDN_PROTO_L2_V11038:
2691                        info->xmit_size /= 10;
2692                }
2693                break;
2694        case 'C':
2695                /* &C - DCD Status */
2696                p[0]++;
2697                switch (isdn_getnum(p)) {
2698                case 0:
2699                        m->mdmreg[REG_DCD] &= ~BIT_DCD;
2700                        break;
2701                case 1:
2702                        m->mdmreg[REG_DCD] |= BIT_DCD;
2703                        break;
2704                default:
2705                        PARSE_ERROR1
2706                                }
2707                break;
2708        case 'D':
2709                /* &D - Set DTR-Low-behavior */
2710                p[0]++;
2711                switch (isdn_getnum(p)) {
2712                case 0:
2713                        m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP;
2714                        m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2715                        break;
2716                case 2:
2717                        m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2718                        m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2719                        break;
2720                case 3:
2721                        m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2722                        m->mdmreg[REG_DTRR] |= BIT_DTRR;
2723                        break;
2724                default:
2725                        PARSE_ERROR1
2726                                }
2727                break;
2728        case 'E':
2729                /* &E -Set EAZ/MSN */
2730                p[0]++;
2731                isdn_tty_get_msnstr(m->msn, p);
2732                break;
2733        case 'F':
2734                /* &F -Set Factory-Defaults */
2735                p[0]++;
2736                if (info->msr & UART_MSR_DCD)
2737                        PARSE_ERROR1;
2738                isdn_tty_reset_profile(m);
2739                isdn_tty_modem_reset_regs(info, 1);
2740                break;
2741#ifdef DUMMY_HAYES_AT
2742        case 'K':
2743                /* only for be compilant with common scripts */
2744                /* &K Flowcontrol - no function */
2745                p[0]++;
2746                isdn_getnum(p);
2747                break;
2748#endif
2749        case 'L':
2750                /* &L -Set Numbers to listen on */
2751                p[0]++;
2752                i = 0;
2753                while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
2754                       (i < ISDN_LMSNLEN - 1))
2755                        m->lmsn[i++] = *p[0]++;
2756                m->lmsn[i] = '\0';
2757                break;
2758        case 'R':
2759                /* &R - Set V.110 bitrate adaption */
2760                p[0]++;
2761                i = isdn_getnum(p);
2762                switch (i) {
2763                case 0:
2764                        /* Switch off V.110, back to X.75 */
2765                        m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2766                        m->mdmreg[REG_SI2] = 0;
2767                        info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2768                        break;
2769                case 9600:
2770                        m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096;
2771                        m->mdmreg[REG_SI2] = 197;
2772                        info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2773                        break;
2774                case 19200:
2775                        m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019;
2776                        m->mdmreg[REG_SI2] = 199;
2777                        info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2778                        break;
2779                case 38400:
2780                        m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038;
2781                        m->mdmreg[REG_SI2] = 198; /* no existing standard for this */
2782                        info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2783                        break;
2784                default:
2785                        PARSE_ERROR1;
2786                }
2787                /* Switch off T.70 */
2788                m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2789                /* Set Service 7 */
2790                m->mdmreg[REG_SI1] |= 4;
2791                break;
2792        case 'S':
2793                /* &S - Set Windowsize */
2794                p[0]++;
2795                i = isdn_getnum(p);
2796                if ((i > 0) && (i < 9))
2797                        m->mdmreg[REG_WSIZE] = i;
2798                else
2799                        PARSE_ERROR1;
2800                break;
2801        case 'V':
2802                /* &V - Show registers */
2803                p[0]++;
2804                isdn_tty_at_cout("\r\n", info);
2805                for (i = 0; i < ISDN_MODEM_NUMREG; i++) {
2806                        sprintf(rb, "S%02d=%03d%s", i,
2807                                m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
2808                        isdn_tty_at_cout(rb, info);
2809                }
2810                sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n",
2811                        strlen(m->msn) ? m->msn : "None");
2812                isdn_tty_at_cout(rb, info);
2813                if (strlen(m->lmsn)) {
2814                        isdn_tty_at_cout("\r\nListen: ", info);
2815                        isdn_tty_at_cout(m->lmsn, info);
2816                        isdn_tty_at_cout("\r\n", info);
2817                }
2818                break;
2819        case 'W':
2820                /* &W - Write Profile */
2821                p[0]++;
2822                switch (*p[0]) {
2823                case '0':
2824                        p[0]++;
2825                        modem_write_profile(m);
2826                        break;
2827                default:
2828                        PARSE_ERROR1;
2829                }
2830                break;
2831        case 'X':
2832                /* &X - Switch to BTX-Mode and T.70 */
2833                p[0]++;
2834                switch (isdn_getnum(p)) {
2835                case 0:
2836                        m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2837                        info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2838                        break;
2839                case 1:
2840                        m->mdmreg[REG_T70] |= BIT_T70;
2841                        m->mdmreg[REG_T70] &= ~BIT_T70_EXT;
2842                        m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2843                        info->xmit_size = 112;
2844                        m->mdmreg[REG_SI1] = 4;
2845                        m->mdmreg[REG_SI2] = 0;
2846                        break;
2847                case 2:
2848                        m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT);
2849                        m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2850                        info->xmit_size = 112;
2851                        m->mdmreg[REG_SI1] = 4;
2852                        m->mdmreg[REG_SI2] = 0;
2853                        break;
2854                default:
2855                        PARSE_ERROR1;
2856                }
2857                break;
2858        default:
2859                PARSE_ERROR1;
2860        }
2861        return 0;
2862}
2863
2864static int
2865isdn_tty_check_ats(int mreg, int mval, modem_info *info, atemu *m)
2866{
2867        /* Some plausibility checks */
2868        switch (mreg) {
2869        case REG_L2PROT:
2870                if (mval > ISDN_PROTO_L2_MAX)
2871                        return 1;
2872                break;
2873        case REG_PSIZE:
2874                if ((mval * 16) > ISDN_SERIAL_XMIT_MAX)
2875                        return 1;
2876#ifdef CONFIG_ISDN_AUDIO
2877                if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX))
2878                        return 1;
2879#endif
2880                info->xmit_size = mval * 16;
2881                switch (m->mdmreg[REG_L2PROT]) {
2882                case ISDN_PROTO_L2_V11096:
2883                case ISDN_PROTO_L2_V11019:
2884                case ISDN_PROTO_L2_V11038:
2885                        info->xmit_size /= 10;
2886                }
2887                break;
2888        case REG_SI1I:
2889        case REG_PLAN:
2890        case REG_SCREEN:
2891                /* readonly registers */
2892                return 1;
2893        }
2894        return 0;
2895}
2896
2897/*
2898 * Perform ATS command
2899 */
2900static int
2901isdn_tty_cmd_ATS(char **p, modem_info *info)
2902{
2903        atemu *m = &info->emu;
2904        int bitpos;
2905        int mreg;
2906        int mval;
2907        int bval;
2908
2909        mreg = isdn_getnum(p);
2910        if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG)
2911                PARSE_ERROR1;
2912        switch (*p[0]) {
2913        case '=':
2914                p[0]++;
2915                mval = isdn_getnum(p);
2916                if (mval < 0 || mval > 255)
2917                        PARSE_ERROR1;
2918                if (isdn_tty_check_ats(mreg, mval, info, m))
2919                        PARSE_ERROR1;
2920                m->mdmreg[mreg] = mval;
2921                break;
2922        case '.':
2923                /* Set/Clear a single bit */
2924                p[0]++;
2925                bitpos = isdn_getnum(p);
2926                if ((bitpos < 0) || (bitpos > 7))
2927                        PARSE_ERROR1;
2928                switch (*p[0]) {
2929                case '=':
2930                        p[0]++;
2931                        bval = isdn_getnum(p);
2932                        if (bval < 0 || bval > 1)
2933                                PARSE_ERROR1;
2934                        if (bval)
2935                                mval = m->mdmreg[mreg] | (1 << bitpos);
2936                        else
2937                                mval = m->mdmreg[mreg] & ~(1 << bitpos);
2938                        if (isdn_tty_check_ats(mreg, mval, info, m))
2939                                PARSE_ERROR1;
2940                        m->mdmreg[mreg] = mval;
2941                        break;
2942                case '?':
2943                        p[0]++;
2944                        isdn_tty_at_cout("\r\n", info);
2945                        isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
2946                                         info);
2947                        break;
2948                default:
2949                        PARSE_ERROR1;
2950                }
2951                break;
2952        case '?':
2953                p[0]++;
2954                isdn_tty_show_profile(mreg, info);
2955                break;
2956        default:
2957                PARSE_ERROR1;
2958                break;
2959        }
2960        return 0;
2961}
2962
2963/*
2964 * Perform ATA command
2965 */
2966static void
2967isdn_tty_cmd_ATA(modem_info *info)
2968{
2969        atemu *m = &info->emu;
2970        isdn_ctrl cmd;
2971        int l2;
2972
2973        if (info->msr & UART_MSR_RI) {
2974                /* Accept incoming call */
2975                info->last_dir = 0;
2976                strcpy(info->last_num, dev->num[info->drv_index]);
2977                m->mdmreg[REG_RINGCNT] = 0;
2978                info->msr &= ~UART_MSR_RI;
2979                l2 = m->mdmreg[REG_L2PROT];
2980#ifdef CONFIG_ISDN_AUDIO
2981                /* If more than one bit set in reg18, autoselect Layer2 */
2982                if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) {
2983                        if (m->mdmreg[REG_SI1I] == 1) {
2984                                if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX))
2985                                        l2 = ISDN_PROTO_L2_TRANS;
2986                        } else
2987                                l2 = ISDN_PROTO_L2_X75I;
2988                }
2989#endif
2990                cmd.driver = info->isdn_driver;
2991                cmd.command = ISDN_CMD_SETL2;
2992                cmd.arg = info->isdn_channel + (l2 << 8);
2993                info->last_l2 = l2;
2994                isdn_command(&cmd);
2995                cmd.driver = info->isdn_driver;
2996                cmd.command = ISDN_CMD_SETL3;
2997                cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
2998#ifdef CONFIG_ISDN_TTY_FAX
2999                if (l2 == ISDN_PROTO_L2_FAX) {
3000                        cmd.parm.fax = info->fax;
3001                        info->fax->direction = ISDN_TTY_FAX_CONN_IN;
3002                }
3003#endif
3004                isdn_command(&cmd);
3005                cmd.driver = info->isdn_driver;
3006                cmd.arg = info->isdn_channel;
3007                cmd.command = ISDN_CMD_ACCEPTD;
3008                info->dialing = 16;
3009                info->emu.carrierwait = 0;
3010                isdn_command(&cmd);
3011                isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
3012        } else
3013                isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3014}
3015
3016#ifdef CONFIG_ISDN_AUDIO
3017/*
3018 * Parse AT+F.. commands
3019 */
3020static int
3021isdn_tty_cmd_PLUSF(char **p, modem_info *info)
3022{
3023        atemu *m = &info->emu;
3024        char rs[20];
3025
3026        if (!strncmp(p[0], "CLASS", 5)) {
3027                p[0] += 5;
3028                switch (*p[0]) {
3029                case '?':
3030                        p[0]++;
3031                        sprintf(rs, "\r\n%d",
3032                                (m->mdmreg[REG_SI1] & 1) ? 8 : 0);
3033#ifdef CONFIG_ISDN_TTY_FAX
3034                        if (TTY_IS_FCLASS2(info))
3035                                sprintf(rs, "\r\n2");
3036                        else if (TTY_IS_FCLASS1(info))
3037                                sprintf(rs, "\r\n1");
3038#endif
3039                        isdn_tty_at_cout(rs, info);
3040                        break;
3041                case '=':
3042                        p[0]++;
3043                        switch (*p[0]) {
3044                        case '0':
3045                                p[0]++;
3046                                m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3047                                m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3048                                m->mdmreg[REG_SI1] = 4;
3049                                info->xmit_size =
3050                                        m->mdmreg[REG_PSIZE] * 16;
3051                                break;
3052#ifdef CONFIG_ISDN_TTY_FAX
3053                        case '1':
3054                                p[0]++;
3055                                if (!(dev->global_features &
3056                                      ISDN_FEATURE_L3_FCLASS1))
3057                                        PARSE_ERROR1;
3058                                m->mdmreg[REG_SI1] = 1;
3059                                m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3060                                m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1;
3061                                info->xmit_size =
3062                                        m->mdmreg[REG_PSIZE] * 16;
3063                                break;
3064                        case '2':
3065                                p[0]++;
3066                                if (!(dev->global_features &
3067                                      ISDN_FEATURE_L3_FCLASS2))
3068                                        PARSE_ERROR1;
3069                                m->mdmreg[REG_SI1] = 1;
3070                                m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3071                                m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2;
3072                                info->xmit_size =
3073                                        m->mdmreg[REG_PSIZE] * 16;
3074                                break;
3075#endif
3076                        case '8':
3077                                p[0]++;
3078                                /* L2 will change on dialout with si=1 */
3079                                m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3080                                m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3081                                m->mdmreg[REG_SI1] = 5;
3082                                info->xmit_size = VBUF;
3083                                break;
3084                        case '?':
3085                                p[0]++;
3086                                strcpy(rs, "\r\n0,");
3087#ifdef CONFIG_ISDN_TTY_FAX
3088                                if (dev->global_features &
3089                                    ISDN_FEATURE_L3_FCLASS1)
3090                                        strcat(rs, "1,");
3091                                if (dev->global_features &
3092                                    ISDN_FEATURE_L3_FCLASS2)
3093                                        strcat(rs, "2,");
3094#endif
3095                                strcat(rs, "8");
3096                                isdn_tty_at_cout(rs, info);
3097                                break;
3098                        default:
3099                                PARSE_ERROR1;
3100                        }
3101                        break;
3102                default:
3103                        PARSE_ERROR1;
3104                }
3105                return 0;
3106        }
3107#ifdef CONFIG_ISDN_TTY_FAX
3108        return (isdn_tty_cmd_PLUSF_FAX(p, info));
3109#else
3110        PARSE_ERROR1;
3111#endif
3112}
3113
3114/*
3115 * Parse AT+V.. commands
3116 */
3117static int
3118isdn_tty_cmd_PLUSV(char **p, modem_info *info)
3119{
3120        atemu *m = &info->emu;
3121        isdn_ctrl cmd;
3122        static char *vcmd[] =
3123                {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL};
3124        int i;
3125        int par1;
3126        int par2;
3127        char rs[20];
3128
3129        i = 0;
3130        while (vcmd[i]) {
3131                if (!strncmp(vcmd[i], p[0], 2)) {
3132                        p[0] += 2;
3133                        break;
3134                }
3135                i++;
3136        }
3137        switch (i) {
3138        case 0:
3139                /* AT+VNH - Auto hangup feature */
3140                switch (*p[0]) {
3141                case '?':
3142                        p[0]++;
3143                        isdn_tty_at_cout("\r\n1", info);
3144                        break;
3145                case '=':
3146                        p[0]++;
3147                        switch (*p[0]) {
3148                        case '1':
3149                                p[0]++;
3150                                break;
3151                        case '?':
3152                                p[0]++;
3153                                isdn_tty_at_cout("\r\n1", info);
3154                                break;
3155                        default:
3156                                PARSE_ERROR1;
3157                        }
3158                        break;
3159                default:
3160                        PARSE_ERROR1;
3161                }
3162                break;
3163        case 1:
3164                /* AT+VIP - Reset all voice parameters */
3165                isdn_tty_modem_reset_vpar(m);
3166                break;
3167        case 2:
3168                /* AT+VLS - Select device, accept incoming call */
3169                switch (*p[0]) {
3170                case '?':
3171                        p[0]++;
3172                        sprintf(rs, "\r\n%d", m->vpar[0]);
3173                        isdn_tty_at_cout(rs, info);
3174                        break;
3175                case '=':
3176                        p[0]++;
3177                        switch (*p[0]) {
3178                        case '0':
3179                                p[0]++;
3180                                m->vpar[0] = 0;
3181                                break;
3182                        case '2':
3183                                p[0]++;
3184                                m->vpar[0] = 2;
3185                                break;
3186                        case '?':
3187                                p[0]++;
3188                                isdn_tty_at_cout("\r\n0,2", info);
3189                                break;
3190                        default:
3191                                PARSE_ERROR1;
3192                        }
3193                        break;
3194                default:
3195                        PARSE_ERROR1;
3196                }
3197                break;
3198        case 3:
3199                /* AT+VRX - Start recording */
3200                if (!m->vpar[0])
3201                        PARSE_ERROR1;
3202                if (info->online != 1) {
3203                        isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3204                        return 1;
3205                }
3206                info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3207                if (!info->dtmf_state) {
3208                        printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3209                        PARSE_ERROR1;
3210                }
3211                info->silence_state = isdn_audio_silence_init(info->silence_state);
3212                if (!info->silence_state) {
3213                        printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n");
3214                        PARSE_ERROR1;
3215                }
3216                if (m->vpar[3] < 5) {
3217                        info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
3218                        if (!info->adpcmr) {
3219                                printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3220                                PARSE_ERROR1;
3221                        }
3222                }
3223#ifdef ISDN_DEBUG_AT
3224                printk(KERN_DEBUG "AT: +VRX\n");
3225#endif
3226                info->vonline |= 1;
3227                isdn_tty_modem_result(RESULT_CONNECT, info);
3228                return 0;
3229                break;
3230        case 4:
3231                /* AT+VSD - Silence detection */
3232                switch (*p[0]) {
3233                case '?':
3234                        p[0]++;
3235                        sprintf(rs, "\r\n<%d>,<%d>",
3236                                m->vpar[1],
3237                                m->vpar[2]);
3238                        isdn_tty_at_cout(rs, info);
3239                        break;
3240                case '=':
3241                        p[0]++;
3242                        if ((*p[0] >= '0') && (*p[0] <= '9')) {
3243                                par1 = isdn_getnum(p);
3244                                if ((par1 < 0) || (par1 > 31))
3245                                        PARSE_ERROR1;
3246                                if (*p[0] != ',')
3247                                        PARSE_ERROR1;
3248                                p[0]++;
3249                                par2 = isdn_getnum(p);
3250                                if ((par2 < 0) || (par2 > 255))
3251                                        PARSE_ERROR1;
3252                                m->vpar[1] = par1;
3253                                m->vpar[2] = par2;
3254                                break;
3255                        } else
3256                                if (*p[0] == '?') {
3257                                        p[0]++;
3258                                        isdn_tty_at_cout("\r\n<0-31>,<0-255>",
3259                                                         info);
3260                                        break;
3261                                } else
3262                                        PARSE_ERROR1;
3263                        break;
3264                default:
3265                        PARSE_ERROR1;
3266                }
3267                break;
3268        case 5:
3269                /* AT+VSM - Select compression */
3270                switch (*p[0]) {
3271                case '?':
3272                        p[0]++;
3273                        sprintf(rs, "\r\n<%d>,<%d><8000>",
3274                                m->vpar[3],
3275                                m->vpar[1]);
3276                        isdn_tty_at_cout(rs, info);
3277                        break;
3278                case '=':
3279                        p[0]++;
3280                        switch (*p[0]) {
3281                        case '2':
3282                        case '3':
3283                        case '4':
3284                        case '5':
3285                        case '6':
3286                                par1 = isdn_getnum(p);
3287                                if ((par1 < 2) || (par1 > 6))
3288                                        PARSE_ERROR1;
3289                                m->vpar[3] = par1;
3290                                break;
3291                        case '?':
3292                                p[0]++;
3293                                isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
3294                                                 info);
3295                                isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
3296                                                 info);
3297                                isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
3298                                                 info);
3299                                isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n",
3300                                                 info);
3301                                isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n",
3302                                                 info);
3303                                break;
3304                        default:
3305                                PARSE_ERROR1;
3306                        }
3307                        break;
3308                default:
3309                        PARSE_ERROR1;
3310                }
3311                break;
3312        case 6:
3313                /* AT+VTX - Start sending */
3314                if (!m->vpar[0])
3315                        PARSE_ERROR1;
3316                if (info->online != 1) {
3317                        isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3318                        return 1;
3319                }
3320                info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3321                if (!info->dtmf_state) {
3322                        printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3323                        PARSE_ERROR1;
3324                }
3325                if (m->vpar[3] < 5) {
3326                        info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
3327                        if (!info->adpcms) {
3328                                printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3329                                PARSE_ERROR1;
3330                        }
3331                }
3332#ifdef ISDN_DEBUG_AT
3333                printk(KERN_DEBUG "AT: +VTX\n");
3334#endif
3335                m->lastDLE = 0;
3336                info->vonline |= 2;
3337                isdn_tty_modem_result(RESULT_CONNECT, info);
3338                return 0;
3339                break;
3340        case 7:
3341                /* AT+VDD - DTMF detection */
3342                switch (*p[0]) {
3343                case '?':
3344                        p[0]++;
3345                        sprintf(rs, "\r\n<%d>,<%d>",
3346                                m->vpar[4],
3347                                m->vpar[5]);
3348                        isdn_tty_at_cout(rs, info);
3349                        break;
3350                case '=':
3351                        p[0]++;
3352                        if ((*p[0] >= '0') && (*p[0] <= '9')) {
3353                                if (info->online != 1)
3354                                        PARSE_ERROR1;
3355                                par1 = isdn_getnum(p);
3356                                if ((par1 < 0) || (par1 > 15))
3357                                        PARSE_ERROR1;
3358                                if (*p[0] != ',')
3359                                        PARSE_ERROR1;
3360                                p[0]++;
3361                                par2 = isdn_getnum(p);
3362                                if ((par2 < 0) || (par2 > 255))
3363                                        PARSE_ERROR1;
3364                                m->vpar[4] = par1;
3365                                m->vpar[5] = par2;
3366                                cmd.driver = info->isdn_driver;
3367                                cmd.command = ISDN_CMD_AUDIO;
3368                                cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8);
3369                                cmd.parm.num[0] = par1;
3370                                cmd.parm.num[1] = par2;
3371                                isdn_command(&cmd);
3372                                break;
3373                        } else
3374                                if (*p[0] == '?') {
3375                                        p[0]++;
3376                                        isdn_tty_at_cout("\r\n<0-15>,<0-255>",
3377                                                         info);
3378                                        break;
3379                                } else
3380                                        PARSE_ERROR1;
3381                        break;
3382                default:
3383                        PARSE_ERROR1;
3384                }
3385                break;
3386        default:
3387                PARSE_ERROR1;
3388        }
3389        return 0;
3390}
3391#endif                          /* CONFIG_ISDN_AUDIO */
3392
3393/*
3394 * Parse and perform an AT-command-line.
3395 */
3396static void
3397isdn_tty_parse_at(modem_info *info)
3398{
3399        atemu *m = &info->emu;
3400        char *p;
3401        char ds[ISDN_MSNLEN];
3402
3403#ifdef ISDN_DEBUG_AT
3404        printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd);
3405#endif
3406        for (p = &m->mdmcmd[2]; *p;) {
3407                switch (*p) {
3408                case ' ':
3409                        p++;
3410                        break;
3411                case 'A':
3412                        /* A - Accept incoming call */
3413                        p++;
3414                        isdn_tty_cmd_ATA(info);
3415                        return;
3416                case 'D':
3417                        /* D - Dial */
3418                        if (info->msr & UART_MSR_DCD)
3419                                PARSE_ERROR;
3420                        if (info->msr & UART_MSR_RI) {
3421                                isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3422                                return;
3423                        }
3424                        isdn_tty_getdial(++p, ds, sizeof ds);
3425                        p += strlen(p);
3426                        if (!strlen(m->msn))
3427                                isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info);
3428                        else if (strlen(ds))
3429                                isdn_tty_dial(ds, info, m);
3430                        else
3431                                PARSE_ERROR;
3432                        return;
3433                case 'E':
3434                        /* E - Turn Echo on/off */
3435                        p++;
3436                        switch (isdn_getnum(&p)) {
3437                        case 0:
3438                                m->mdmreg[REG_ECHO] &= ~BIT_ECHO;
3439                                break;
3440                        case 1:
3441                                m->mdmreg[REG_ECHO] |= BIT_ECHO;
3442                                break;
3443                        default:
3444                                PARSE_ERROR;
3445                        }
3446                        break;
3447                case 'H':
3448                        /* H - On/Off-hook */
3449                        p++;
3450                        switch (*p) {
3451                        case '0':
3452                                p++;
3453                                isdn_tty_on_hook(info);
3454                                break;
3455                        case '1':
3456                                p++;
3457                                isdn_tty_off_hook();
3458                                break;
3459                        default:
3460                                isdn_tty_on_hook(info);
3461                                break;
3462                        }
3463                        break;
3464                case 'I':
3465                        /* I - Information */
3466                        p++;
3467                        isdn_tty_at_cout("\r\nLinux ISDN", info);
3468                        switch (*p) {
3469                        case '0':
3470                        case '1':
3471                                p++;
3472                                break;
3473                        case '2':
3474                                p++;
3475                                isdn_tty_report(info);
3476                                break;
3477                        case '3':
3478                                p++;
3479                                snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge);
3480                                isdn_tty_at_cout(ds, info);
3481                                break;
3482                        default:;
3483                        }
3484                        break;
3485#ifdef DUMMY_HAYES_AT
3486                case 'L':
3487                case 'M':
3488                        /* only for be compilant with common scripts */
3489                        /* no function */
3490                        p++;
3491                        isdn_getnum(&p);
3492                        break;
3493#endif
3494                case 'O':
3495                        /* O - Go online */
3496                        p++;
3497                        if (info->msr & UART_MSR_DCD)
3498                                /* if B-Channel is up */
3499                                isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT : RESULT_CONNECT64000, info);
3500                        else
3501                                isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3502                        return;
3503                case 'Q':
3504                        /* Q - Turn Emulator messages on/off */
3505                        p++;
3506                        switch (isdn_getnum(&p)) {
3507                        case 0:
3508                                m->mdmreg[REG_RESP] |= BIT_RESP;
3509                                break;
3510                        case 1:
3511                                m->mdmreg[REG_RESP] &= ~BIT_RESP;
3512                                break;
3513                        default:
3514                                PARSE_ERROR;
3515                        }
3516                        break;
3517                case 'S':
3518                        /* S - Set/Get Register */
3519                        p++;
3520                        if (isdn_tty_cmd_ATS(&p, info))
3521                                return;
3522                        break;
3523                case 'V':
3524                        /* V - Numeric or ASCII Emulator-messages */
3525                        p++;
3526                        switch (isdn_getnum(&p)) {
3527                        case 0:
3528                                m->mdmreg[REG_RESP] |= BIT_RESPNUM;
3529                                break;
3530                        case 1:
3531                                m->mdmreg[REG_RESP] &= ~BIT_RESPNUM;
3532                                break;
3533                        default:
3534                                PARSE_ERROR;
3535                        }
3536                        break;
3537                case 'Z':
3538                        /* Z - Load Registers from Profile */
3539                        p++;
3540                        if (info->msr & UART_MSR_DCD) {
3541                                info->online = 0;
3542                                isdn_tty_on_hook(info);
3543                        }
3544                        isdn_tty_modem_reset_regs(info, 1);
3545                        break;
3546                case '+':
3547                        p++;
3548                        switch (*p) {
3549#ifdef CONFIG_ISDN_AUDIO
3550                        case 'F':
3551                                p++;
3552                                if (isdn_tty_cmd_PLUSF(&p, info))
3553                                        return;
3554                                break;
3555                        case 'V':
3556                                if ((!(m->mdmreg[REG_SI1] & 1)) ||
3557                                    (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM))
3558                                        PARSE_ERROR;
3559                                p++;
3560                                if (isdn_tty_cmd_PLUSV(&p, info))
3561                                        return;
3562                                break;
3563#endif                          /* CONFIG_ISDN_AUDIO */
3564                        case 'S':       /* SUSPEND */
3565                                p++;
3566                                isdn_tty_get_msnstr(ds, &p);
3567                                isdn_tty_suspend(ds, info, m);
3568                                break;
3569                        case 'R':       /* RESUME */
3570                                p++;
3571                                isdn_tty_get_msnstr(ds, &p);
3572                                isdn_tty_resume(ds, info, m);
3573                                break;
3574                        case 'M':       /* MESSAGE */
3575                                p++;
3576                                isdn_tty_send_msg(info, m, p);
3577                                break;
3578                        default:
3579                                PARSE_ERROR;
3580                        }
3581                        break;
3582                case '&':
3583                        p++;
3584                        if (isdn_tty_cmd_ATand(&p, info))
3585                                return;
3586                        break;
3587                default:
3588                        PARSE_ERROR;
3589                }
3590        }
3591#ifdef CONFIG_ISDN_AUDIO
3592        if (!info->vonline)
3593#endif
3594                isdn_tty_modem_result(RESULT_OK, info);
3595}
3596
3597/* Need own toupper() because standard-toupper is not available
3598 * within modules.
3599 */
3600#define my_toupper(c) (((c >= 'a') && (c <= 'z')) ? (c & 0xdf) : c)
3601
3602/*
3603 * Perform line-editing of AT-commands
3604 *
3605 * Parameters:
3606 *   p        inputbuffer
3607 *   count    length of buffer
3608 *   channel  index to line (minor-device)
3609 */
3610static int
3611isdn_tty_edit_at(const char *p, int count, modem_info *info)
3612{
3613        atemu *m = &info->emu;
3614        int total = 0;
3615        u_char c;
3616        char eb[2];
3617        int cnt;
3618
3619        for (cnt = count; cnt > 0; p++, cnt--) {
3620                c = *p;
3621                total++;
3622                if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) {
3623                        /* Separator (CR or LF) */
3624                        m->mdmcmd[m->mdmcmdl] = 0;
3625                        if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3626                                eb[0] = c;
3627                                eb[1] = 0;
3628                                isdn_tty_at_cout(eb, info);
3629                        }
3630                        if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2))))
3631                                isdn_tty_parse_at(info);
3632                        m->mdmcmdl = 0;
3633                        continue;
3634                }
3635                if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) {
3636                        /* Backspace-Function */
3637                        if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) {
3638                                if (m->mdmcmdl)
3639                                        m->mdmcmdl--;
3640                                if (m->mdmreg[REG_ECHO] & BIT_ECHO)
3641                                        isdn_tty_at_cout("\b", info);
3642                        }
3643                        continue;
3644                }
3645                if (cmdchar(c)) {
3646                        if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3647                                eb[0] = c;
3648                                eb[1] = 0;
3649                                isdn_tty_at_cout(eb, info);
3650                        }
3651                        if (m->mdmcmdl < 255) {
3652                                c = my_toupper(c);
3653                                switch (m->mdmcmdl) {
3654                                case 1:
3655                                        if (c == 'T') {
3656                                                m->mdmcmd[m->mdmcmdl] = c;
3657                                                m->mdmcmd[++m->mdmcmdl] = 0;
3658                                                break;
3659                                        } else
3660                                                m->mdmcmdl = 0;
3661                                        /* Fall through, check for 'A' */
3662                                case 0:
3663                                        if (c == 'A') {
3664                                                m->mdmcmd[m->mdmcmdl] = c;
3665                                                m->mdmcmd[++m->mdmcmdl] = 0;
3666                                        }
3667                                        break;
3668                                default:
3669                                        m->mdmcmd[m->mdmcmdl] = c;
3670                                        m->mdmcmd[++m->mdmcmdl] = 0;
3671                                }
3672                        }
3673                }
3674        }
3675        return total;
3676}
3677
3678/*
3679 * Switch all modem-channels who are online and got a valid
3680 * escape-sequence 1.5 seconds ago, to command-mode.
3681 * This function is called every second via timer-interrupt from within
3682 * timer-dispatcher isdn_timer_function()
3683 */
3684void
3685isdn_tty_modem_escape(void)
3686{
3687        int ton = 0;
3688        int i;
3689        int midx;
3690
3691        for (i = 0; i < ISDN_MAX_CHANNELS; i++)
3692                if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) {
3693                        modem_info *info = &dev->mdm.info[midx];
3694                        if (info->online) {
3695                                ton = 1;
3696                                if ((info->emu.pluscount == 3) &&
3697                                    time_after(jiffies,
3698                                            info->emu.lastplus + PLUSWAIT2)) {
3699                                        info->emu.pluscount = 0;
3700                                        info->online = 0;
3701                                        isdn_tty_modem_result(RESULT_OK, info);
3702                                }
3703                        }
3704                }
3705        isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
3706}
3707
3708/*
3709 * Put a RING-message to all modem-channels who have the RI-bit set.
3710 * This function is called every second via timer-interrupt from within
3711 * timer-dispatcher isdn_timer_function()
3712 */
3713void
3714isdn_tty_modem_ring(void)
3715{
3716        int ton = 0;
3717        int i;
3718
3719        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3720                modem_info *info = &dev->mdm.info[i];
3721                if (info->msr & UART_MSR_RI) {
3722                        ton = 1;
3723                        isdn_tty_modem_result(RESULT_RING, info);
3724                }
3725        }
3726        isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton);
3727}
3728
3729/*
3730 * For all online tty's, try sending data to
3731 * the lower levels.
3732 */
3733void
3734isdn_tty_modem_xmit(void)
3735{
3736        int ton = 1;
3737        int i;
3738
3739        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3740                modem_info *info = &dev->mdm.info[i];
3741                if (info->online) {
3742                        ton = 1;
3743                        isdn_tty_senddown(info);
3744                        isdn_tty_tint(info);
3745                }
3746        }
3747        isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton);
3748}
3749
3750/*
3751 * Check all channels if we have a 'no carrier' timeout.
3752 * Timeout value is set by Register S7.
3753 */
3754void
3755isdn_tty_carrier_timeout(void)
3756{
3757        int ton = 0;
3758        int i;
3759
3760        for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3761                modem_info *info = &dev->mdm.info[i];
3762                if (!info->dialing)
3763                        continue;
3764                if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
3765                        info->dialing = 0;
3766                        isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3767                        isdn_tty_modem_hup(info, 1);
3768                } else
3769                        ton = 1;
3770        }
3771        isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
3772}
3773