1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/err.h>
26#include <linux/i2c.h>
27#include <linux/mfd/core.h>
28#include <linux/mfd/88pm80x.h>
29#include <linux/slab.h>
30
31
32#define PM800_INT_STATUS1 (0x05)
33#define PM800_ONKEY_INT_STS1 (1 << 0)
34#define PM800_EXTON_INT_STS1 (1 << 1)
35#define PM800_CHG_INT_STS1 (1 << 2)
36#define PM800_BAT_INT_STS1 (1 << 3)
37#define PM800_RTC_INT_STS1 (1 << 4)
38#define PM800_CLASSD_OC_INT_STS1 (1 << 5)
39
40#define PM800_INT_STATUS2 (0x06)
41#define PM800_VBAT_INT_STS2 (1 << 0)
42#define PM800_VSYS_INT_STS2 (1 << 1)
43#define PM800_VCHG_INT_STS2 (1 << 2)
44#define PM800_TINT_INT_STS2 (1 << 3)
45#define PM800_GPADC0_INT_STS2 (1 << 4)
46#define PM800_TBAT_INT_STS2 (1 << 5)
47#define PM800_GPADC2_INT_STS2 (1 << 6)
48#define PM800_GPADC3_INT_STS2 (1 << 7)
49
50#define PM800_INT_STATUS3 (0x07)
51
52#define PM800_INT_STATUS4 (0x08)
53#define PM800_GPIO0_INT_STS4 (1 << 0)
54#define PM800_GPIO1_INT_STS4 (1 << 1)
55#define PM800_GPIO2_INT_STS4 (1 << 2)
56#define PM800_GPIO3_INT_STS4 (1 << 3)
57#define PM800_GPIO4_INT_STS4 (1 << 4)
58
59#define PM800_INT_ENA_1 (0x09)
60#define PM800_ONKEY_INT_ENA1 (1 << 0)
61#define PM800_EXTON_INT_ENA1 (1 << 1)
62#define PM800_CHG_INT_ENA1 (1 << 2)
63#define PM800_BAT_INT_ENA1 (1 << 3)
64#define PM800_RTC_INT_ENA1 (1 << 4)
65#define PM800_CLASSD_OC_INT_ENA1 (1 << 5)
66
67#define PM800_INT_ENA_2 (0x0A)
68#define PM800_VBAT_INT_ENA2 (1 << 0)
69#define PM800_VSYS_INT_ENA2 (1 << 1)
70#define PM800_VCHG_INT_ENA2 (1 << 2)
71#define PM800_TINT_INT_ENA2 (1 << 3)
72
73#define PM800_INT_ENA_3 (0x0B)
74#define PM800_GPADC0_INT_ENA3 (1 << 0)
75#define PM800_GPADC1_INT_ENA3 (1 << 1)
76#define PM800_GPADC2_INT_ENA3 (1 << 2)
77#define PM800_GPADC3_INT_ENA3 (1 << 3)
78#define PM800_GPADC4_INT_ENA3 (1 << 4)
79
80#define PM800_INT_ENA_4 (0x0C)
81#define PM800_GPIO0_INT_ENA4 (1 << 0)
82#define PM800_GPIO1_INT_ENA4 (1 << 1)
83#define PM800_GPIO2_INT_ENA4 (1 << 2)
84#define PM800_GPIO3_INT_ENA4 (1 << 3)
85#define PM800_GPIO4_INT_ENA4 (1 << 4)
86
87
88#define PM800_INT_REG_NUM (4)
89
90
91enum {
92 PM800_IRQ_ONKEY,
93 PM800_IRQ_EXTON,
94 PM800_IRQ_CHG,
95 PM800_IRQ_BAT,
96 PM800_IRQ_RTC,
97 PM800_IRQ_CLASSD,
98 PM800_IRQ_VBAT,
99 PM800_IRQ_VSYS,
100 PM800_IRQ_VCHG,
101 PM800_IRQ_TINT,
102 PM800_IRQ_GPADC0,
103 PM800_IRQ_GPADC1,
104 PM800_IRQ_GPADC2,
105 PM800_IRQ_GPADC3,
106 PM800_IRQ_GPADC4,
107 PM800_IRQ_GPIO0,
108 PM800_IRQ_GPIO1,
109 PM800_IRQ_GPIO2,
110 PM800_IRQ_GPIO3,
111 PM800_IRQ_GPIO4,
112 PM800_MAX_IRQ,
113};
114
115
116#define PM800_CHIP_GEN_ID_NUM 0x3
117
118static const struct i2c_device_id pm80x_id_table[] = {
119 {"88PM800", 0},
120 {}
121};
122MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
123
124static struct resource rtc_resources[] = {
125 {
126 .name = "88pm80x-rtc",
127 .start = PM800_IRQ_RTC,
128 .end = PM800_IRQ_RTC,
129 .flags = IORESOURCE_IRQ,
130 },
131};
132
133static struct mfd_cell rtc_devs[] = {
134 {
135 .name = "88pm80x-rtc",
136 .num_resources = ARRAY_SIZE(rtc_resources),
137 .resources = &rtc_resources[0],
138 .id = -1,
139 },
140};
141
142static struct resource onkey_resources[] = {
143 {
144 .name = "88pm80x-onkey",
145 .start = PM800_IRQ_ONKEY,
146 .end = PM800_IRQ_ONKEY,
147 .flags = IORESOURCE_IRQ,
148 },
149};
150
151static const struct mfd_cell onkey_devs[] = {
152 {
153 .name = "88pm80x-onkey",
154 .num_resources = 1,
155 .resources = &onkey_resources[0],
156 .id = -1,
157 },
158};
159
160static const struct mfd_cell regulator_devs[] = {
161 {
162 .name = "88pm80x-regulator",
163 .id = -1,
164 },
165};
166
167static const struct regmap_irq pm800_irqs[] = {
168
169 [PM800_IRQ_ONKEY] = {
170 .mask = PM800_ONKEY_INT_ENA1,
171 },
172 [PM800_IRQ_EXTON] = {
173 .mask = PM800_EXTON_INT_ENA1,
174 },
175 [PM800_IRQ_CHG] = {
176 .mask = PM800_CHG_INT_ENA1,
177 },
178 [PM800_IRQ_BAT] = {
179 .mask = PM800_BAT_INT_ENA1,
180 },
181 [PM800_IRQ_RTC] = {
182 .mask = PM800_RTC_INT_ENA1,
183 },
184 [PM800_IRQ_CLASSD] = {
185 .mask = PM800_CLASSD_OC_INT_ENA1,
186 },
187
188 [PM800_IRQ_VBAT] = {
189 .reg_offset = 1,
190 .mask = PM800_VBAT_INT_ENA2,
191 },
192 [PM800_IRQ_VSYS] = {
193 .reg_offset = 1,
194 .mask = PM800_VSYS_INT_ENA2,
195 },
196 [PM800_IRQ_VCHG] = {
197 .reg_offset = 1,
198 .mask = PM800_VCHG_INT_ENA2,
199 },
200 [PM800_IRQ_TINT] = {
201 .reg_offset = 1,
202 .mask = PM800_TINT_INT_ENA2,
203 },
204
205 [PM800_IRQ_GPADC0] = {
206 .reg_offset = 2,
207 .mask = PM800_GPADC0_INT_ENA3,
208 },
209 [PM800_IRQ_GPADC1] = {
210 .reg_offset = 2,
211 .mask = PM800_GPADC1_INT_ENA3,
212 },
213 [PM800_IRQ_GPADC2] = {
214 .reg_offset = 2,
215 .mask = PM800_GPADC2_INT_ENA3,
216 },
217 [PM800_IRQ_GPADC3] = {
218 .reg_offset = 2,
219 .mask = PM800_GPADC3_INT_ENA3,
220 },
221 [PM800_IRQ_GPADC4] = {
222 .reg_offset = 2,
223 .mask = PM800_GPADC4_INT_ENA3,
224 },
225
226 [PM800_IRQ_GPIO0] = {
227 .reg_offset = 3,
228 .mask = PM800_GPIO0_INT_ENA4,
229 },
230 [PM800_IRQ_GPIO1] = {
231 .reg_offset = 3,
232 .mask = PM800_GPIO1_INT_ENA4,
233 },
234 [PM800_IRQ_GPIO2] = {
235 .reg_offset = 3,
236 .mask = PM800_GPIO2_INT_ENA4,
237 },
238 [PM800_IRQ_GPIO3] = {
239 .reg_offset = 3,
240 .mask = PM800_GPIO3_INT_ENA4,
241 },
242 [PM800_IRQ_GPIO4] = {
243 .reg_offset = 3,
244 .mask = PM800_GPIO4_INT_ENA4,
245 },
246};
247
248static int device_gpadc_init(struct pm80x_chip *chip,
249 struct pm80x_platform_data *pdata)
250{
251 struct pm80x_subchip *subchip = chip->subchip;
252 struct regmap *map = subchip->regmap_gpadc;
253 int data = 0, mask = 0, ret = 0;
254
255 if (!map) {
256 dev_warn(chip->dev,
257 "Warning: gpadc regmap is not available!\n");
258 return -EINVAL;
259 }
260
261
262
263
264 ret = regmap_update_bits(map,
265 PM800_GPADC_MISC_CONFIG2,
266 PM800_GPADC_MISC_GPFSM_EN,
267 PM800_GPADC_MISC_GPFSM_EN);
268 if (ret < 0)
269 goto out;
270
271
272
273
274
275
276
277 ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN1,
278 PM800_MEAS_EN1_VBAT, PM800_MEAS_EN1_VBAT);
279 if (ret < 0)
280 goto out;
281 ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN2,
282 (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN),
283 (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN));
284 if (ret < 0)
285 goto out;
286
287
288
289
290
291
292
293 mask = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
294 PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
295
296 if (pdata && (pdata->batt_det == 0))
297 data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
298 PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
299 else
300 data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN2 |
301 PM800_GPADC_GP_BIAS_EN3);
302
303 ret = regmap_update_bits(map, PM800_GP_BIAS_ENA1, mask, data);
304 if (ret < 0)
305 goto out;
306
307 dev_info(chip->dev, "pm800 device_gpadc_init: Done\n");
308 return 0;
309
310out:
311 dev_info(chip->dev, "pm800 device_gpadc_init: Failed!\n");
312 return ret;
313}
314
315static int device_onkey_init(struct pm80x_chip *chip,
316 struct pm80x_platform_data *pdata)
317{
318 int ret;
319
320 ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
321 ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
322 NULL);
323 if (ret) {
324 dev_err(chip->dev, "Failed to add onkey subdev\n");
325 return ret;
326 }
327
328 return 0;
329}
330
331static int device_rtc_init(struct pm80x_chip *chip,
332 struct pm80x_platform_data *pdata)
333{
334 int ret;
335
336 if (pdata) {
337 rtc_devs[0].platform_data = pdata->rtc;
338 rtc_devs[0].pdata_size =
339 pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0;
340 }
341 ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
342 ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
343 if (ret) {
344 dev_err(chip->dev, "Failed to add rtc subdev\n");
345 return ret;
346 }
347
348 return 0;
349}
350
351static int device_regulator_init(struct pm80x_chip *chip,
352 struct pm80x_platform_data *pdata)
353{
354 int ret;
355
356 ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0],
357 ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
358 if (ret) {
359 dev_err(chip->dev, "Failed to add regulator subdev\n");
360 return ret;
361 }
362
363 return 0;
364}
365
366static int device_irq_init_800(struct pm80x_chip *chip)
367{
368 struct regmap *map = chip->regmap;
369 unsigned long flags = IRQF_ONESHOT;
370 int data, mask, ret = -EINVAL;
371
372 if (!map || !chip->irq) {
373 dev_err(chip->dev, "incorrect parameters\n");
374 return -EINVAL;
375 }
376
377
378
379
380
381 mask =
382 PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
383 PM800_WAKEUP2_INT_MASK;
384
385 data = PM800_WAKEUP2_INT_CLEAR;
386 ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
387
388 if (ret < 0)
389 goto out;
390
391 ret =
392 regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
393 chip->regmap_irq_chip, &chip->irq_data);
394
395out:
396 return ret;
397}
398
399static void device_irq_exit_800(struct pm80x_chip *chip)
400{
401 regmap_del_irq_chip(chip->irq, chip->irq_data);
402}
403
404static struct regmap_irq_chip pm800_irq_chip = {
405 .name = "88pm800",
406 .irqs = pm800_irqs,
407 .num_irqs = ARRAY_SIZE(pm800_irqs),
408
409 .num_regs = 4,
410 .status_base = PM800_INT_STATUS1,
411 .mask_base = PM800_INT_ENA_1,
412 .ack_base = PM800_INT_STATUS1,
413 .mask_invert = 1,
414};
415
416static int pm800_pages_init(struct pm80x_chip *chip)
417{
418 struct pm80x_subchip *subchip;
419 struct i2c_client *client = chip->client;
420
421 int ret = 0;
422
423 subchip = chip->subchip;
424 if (!subchip || !subchip->power_page_addr || !subchip->gpadc_page_addr)
425 return -ENODEV;
426
427
428 subchip->power_page = i2c_new_dummy(client->adapter,
429 subchip->power_page_addr);
430 if (subchip->power_page == NULL) {
431 ret = -ENODEV;
432 goto out;
433 }
434
435 subchip->regmap_power = devm_regmap_init_i2c(subchip->power_page,
436 &pm80x_regmap_config);
437 if (IS_ERR(subchip->regmap_power)) {
438 ret = PTR_ERR(subchip->regmap_power);
439 dev_err(chip->dev,
440 "Failed to allocate regmap_power: %d\n", ret);
441 goto out;
442 }
443
444 i2c_set_clientdata(subchip->power_page, chip);
445
446
447 subchip->gpadc_page = i2c_new_dummy(client->adapter,
448 subchip->gpadc_page_addr);
449 if (subchip->gpadc_page == NULL) {
450 ret = -ENODEV;
451 goto out;
452 }
453
454 subchip->regmap_gpadc = devm_regmap_init_i2c(subchip->gpadc_page,
455 &pm80x_regmap_config);
456 if (IS_ERR(subchip->regmap_gpadc)) {
457 ret = PTR_ERR(subchip->regmap_gpadc);
458 dev_err(chip->dev,
459 "Failed to allocate regmap_gpadc: %d\n", ret);
460 goto out;
461 }
462 i2c_set_clientdata(subchip->gpadc_page, chip);
463
464out:
465 return ret;
466}
467
468static void pm800_pages_exit(struct pm80x_chip *chip)
469{
470 struct pm80x_subchip *subchip;
471
472 subchip = chip->subchip;
473
474 if (subchip && subchip->power_page)
475 i2c_unregister_device(subchip->power_page);
476
477 if (subchip && subchip->gpadc_page)
478 i2c_unregister_device(subchip->gpadc_page);
479}
480
481static int device_800_init(struct pm80x_chip *chip,
482 struct pm80x_platform_data *pdata)
483{
484 int ret;
485 unsigned int val;
486
487
488
489
490
491 ret = regmap_read(chip->regmap, PM800_RTC_CONTROL, &val);
492 if (ret < 0) {
493 dev_err(chip->dev, "Failed to read RTC register: %d\n", ret);
494 goto out;
495 }
496 if (val & PM800_ALARM_WAKEUP) {
497 if (pdata && pdata->rtc)
498 pdata->rtc->rtc_wakeup = 1;
499 }
500
501 ret = device_gpadc_init(chip, pdata);
502 if (ret < 0) {
503 dev_err(chip->dev, "[%s]Failed to init gpadc\n", __func__);
504 goto out;
505 }
506
507 chip->regmap_irq_chip = &pm800_irq_chip;
508
509 ret = device_irq_init_800(chip);
510 if (ret < 0) {
511 dev_err(chip->dev, "[%s]Failed to init pm800 irq\n", __func__);
512 goto out;
513 }
514
515 ret = device_onkey_init(chip, pdata);
516 if (ret) {
517 dev_err(chip->dev, "Failed to add onkey subdev\n");
518 goto out_dev;
519 }
520
521 ret = device_rtc_init(chip, pdata);
522 if (ret) {
523 dev_err(chip->dev, "Failed to add rtc subdev\n");
524 goto out;
525 }
526
527 ret = device_regulator_init(chip, pdata);
528 if (ret) {
529 dev_err(chip->dev, "Failed to add regulators subdev\n");
530 goto out;
531 }
532
533 return 0;
534out_dev:
535 mfd_remove_devices(chip->dev);
536 device_irq_exit_800(chip);
537out:
538 return ret;
539}
540
541static int pm800_probe(struct i2c_client *client,
542 const struct i2c_device_id *id)
543{
544 int ret = 0;
545 struct pm80x_chip *chip;
546 struct pm80x_platform_data *pdata = dev_get_platdata(&client->dev);
547 struct pm80x_subchip *subchip;
548
549 ret = pm80x_init(client);
550 if (ret) {
551 dev_err(&client->dev, "pm800_init fail\n");
552 goto out_init;
553 }
554
555 chip = i2c_get_clientdata(client);
556
557
558 subchip =
559 devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
560 GFP_KERNEL);
561 if (!subchip) {
562 ret = -ENOMEM;
563 goto err_subchip_alloc;
564 }
565
566
567 subchip->power_page_addr = client->addr + 1;
568 subchip->gpadc_page_addr = client->addr + 2;
569 chip->subchip = subchip;
570
571 ret = pm800_pages_init(chip);
572 if (ret) {
573 dev_err(&client->dev, "pm800_pages_init failed!\n");
574 goto err_device_init;
575 }
576
577 ret = device_800_init(chip, pdata);
578 if (ret) {
579 dev_err(chip->dev, "Failed to initialize 88pm800 devices\n");
580 goto err_device_init;
581 }
582
583 if (pdata && pdata->plat_config)
584 pdata->plat_config(chip, pdata);
585
586 return 0;
587
588err_device_init:
589 pm800_pages_exit(chip);
590err_subchip_alloc:
591 pm80x_deinit();
592out_init:
593 return ret;
594}
595
596static int pm800_remove(struct i2c_client *client)
597{
598 struct pm80x_chip *chip = i2c_get_clientdata(client);
599
600 mfd_remove_devices(chip->dev);
601 device_irq_exit_800(chip);
602
603 pm800_pages_exit(chip);
604 pm80x_deinit();
605
606 return 0;
607}
608
609static struct i2c_driver pm800_driver = {
610 .driver = {
611 .name = "88PM800",
612 .pm = &pm80x_pm_ops,
613 },
614 .probe = pm800_probe,
615 .remove = pm800_remove,
616 .id_table = pm80x_id_table,
617};
618
619static int __init pm800_i2c_init(void)
620{
621 return i2c_add_driver(&pm800_driver);
622}
623subsys_initcall(pm800_i2c_init);
624
625static void __exit pm800_i2c_exit(void)
626{
627 i2c_del_driver(&pm800_driver);
628}
629module_exit(pm800_i2c_exit);
630
631MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM800");
632MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
633MODULE_LICENSE("GPL");
634
