1/* 2 * drivers/net/ethernet/mellanox/mlxsw/cmd.h 3 * Copyright (c) 2015 Mellanox Technologies. All rights reserved. 4 * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com> 5 * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the names of the copyright holders nor the names of its 16 * contributors may be used to endorse or promote products derived from 17 * this software without specific prior written permission. 18 * 19 * Alternatively, this software may be distributed under the terms of the 20 * GNU General Public License ("GPL") version 2 as published by the Free 21 * Software Foundation. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 24 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 27 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 33 * POSSIBILITY OF SUCH DAMAGE. 34 */ 35 36#ifndef _MLXSW_CMD_H 37#define _MLXSW_CMD_H 38 39#include "item.h" 40 41#define MLXSW_CMD_MBOX_SIZE 4096 42 43static inline char *mlxsw_cmd_mbox_alloc(void) 44{ 45 return kzalloc(MLXSW_CMD_MBOX_SIZE, GFP_KERNEL); 46} 47 48static inline void mlxsw_cmd_mbox_free(char *mbox) 49{ 50 kfree(mbox); 51} 52 53static inline void mlxsw_cmd_mbox_zero(char *mbox) 54{ 55 memset(mbox, 0, MLXSW_CMD_MBOX_SIZE); 56} 57 58struct mlxsw_core; 59 60int mlxsw_cmd_exec(struct mlxsw_core *mlxsw_core, u16 opcode, u8 opcode_mod, 61 u32 in_mod, bool out_mbox_direct, 62 char *in_mbox, size_t in_mbox_size, 63 char *out_mbox, size_t out_mbox_size); 64 65static inline int mlxsw_cmd_exec_in(struct mlxsw_core *mlxsw_core, u16 opcode, 66 u8 opcode_mod, u32 in_mod, char *in_mbox, 67 size_t in_mbox_size) 68{ 69 return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod, false, 70 in_mbox, in_mbox_size, NULL, 0); 71} 72 73static inline int mlxsw_cmd_exec_out(struct mlxsw_core *mlxsw_core, u16 opcode, 74 u8 opcode_mod, u32 in_mod, 75 bool out_mbox_direct, 76 char *out_mbox, size_t out_mbox_size) 77{ 78 return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod, 79 out_mbox_direct, NULL, 0, 80 out_mbox, out_mbox_size); 81} 82 83static inline int mlxsw_cmd_exec_none(struct mlxsw_core *mlxsw_core, u16 opcode, 84 u8 opcode_mod, u32 in_mod) 85{ 86 return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod, false, 87 NULL, 0, NULL, 0); 88} 89 90enum mlxsw_cmd_opcode { 91 MLXSW_CMD_OPCODE_QUERY_FW = 0x004, 92 MLXSW_CMD_OPCODE_QUERY_BOARDINFO = 0x006, 93 MLXSW_CMD_OPCODE_QUERY_AQ_CAP = 0x003, 94 MLXSW_CMD_OPCODE_MAP_FA = 0xFFF, 95 MLXSW_CMD_OPCODE_UNMAP_FA = 0xFFE, 96 MLXSW_CMD_OPCODE_CONFIG_PROFILE = 0x100, 97 MLXSW_CMD_OPCODE_ACCESS_REG = 0x040, 98 MLXSW_CMD_OPCODE_SW2HW_DQ = 0x201, 99 MLXSW_CMD_OPCODE_HW2SW_DQ = 0x202, 100 MLXSW_CMD_OPCODE_2ERR_DQ = 0x01E, 101 MLXSW_CMD_OPCODE_QUERY_DQ = 0x022, 102 MLXSW_CMD_OPCODE_SW2HW_CQ = 0x016, 103 MLXSW_CMD_OPCODE_HW2SW_CQ = 0x017, 104 MLXSW_CMD_OPCODE_QUERY_CQ = 0x018, 105 MLXSW_CMD_OPCODE_SW2HW_EQ = 0x013, 106 MLXSW_CMD_OPCODE_HW2SW_EQ = 0x014, 107 MLXSW_CMD_OPCODE_QUERY_EQ = 0x015, 108 MLXSW_CMD_OPCODE_QUERY_RESOURCES = 0x101, 109}; 110 111static inline const char *mlxsw_cmd_opcode_str(u16 opcode) 112{ 113 switch (opcode) { 114 case MLXSW_CMD_OPCODE_QUERY_FW: 115 return "QUERY_FW"; 116 case MLXSW_CMD_OPCODE_QUERY_BOARDINFO: 117 return "QUERY_BOARDINFO"; 118 case MLXSW_CMD_OPCODE_QUERY_AQ_CAP: 119 return "QUERY_AQ_CAP"; 120 case MLXSW_CMD_OPCODE_MAP_FA: 121 return "MAP_FA"; 122 case MLXSW_CMD_OPCODE_UNMAP_FA: 123 return "UNMAP_FA"; 124 case MLXSW_CMD_OPCODE_CONFIG_PROFILE: 125 return "CONFIG_PROFILE"; 126 case MLXSW_CMD_OPCODE_ACCESS_REG: 127 return "ACCESS_REG"; 128 case MLXSW_CMD_OPCODE_SW2HW_DQ: 129 return "SW2HW_DQ"; 130 case MLXSW_CMD_OPCODE_HW2SW_DQ: 131 return "HW2SW_DQ"; 132 case MLXSW_CMD_OPCODE_2ERR_DQ: 133 return "2ERR_DQ"; 134 case MLXSW_CMD_OPCODE_QUERY_DQ: 135 return "QUERY_DQ"; 136 case MLXSW_CMD_OPCODE_SW2HW_CQ: 137 return "SW2HW_CQ"; 138 case MLXSW_CMD_OPCODE_HW2SW_CQ: 139 return "HW2SW_CQ"; 140 case MLXSW_CMD_OPCODE_QUERY_CQ: 141 return "QUERY_CQ"; 142 case MLXSW_CMD_OPCODE_SW2HW_EQ: 143 return "SW2HW_EQ"; 144 case MLXSW_CMD_OPCODE_HW2SW_EQ: 145 return "HW2SW_EQ"; 146 case MLXSW_CMD_OPCODE_QUERY_EQ: 147 return "QUERY_EQ"; 148 case MLXSW_CMD_OPCODE_QUERY_RESOURCES: 149 return "QUERY_RESOURCES"; 150 default: 151 return "*UNKNOWN*"; 152 } 153} 154 155enum mlxsw_cmd_status { 156 /* Command execution succeeded. */ 157 MLXSW_CMD_STATUS_OK = 0x00, 158 /* Internal error (e.g. bus error) occurred while processing command. */ 159 MLXSW_CMD_STATUS_INTERNAL_ERR = 0x01, 160 /* Operation/command not supported or opcode modifier not supported. */ 161 MLXSW_CMD_STATUS_BAD_OP = 0x02, 162 /* Parameter not supported, parameter out of range. */ 163 MLXSW_CMD_STATUS_BAD_PARAM = 0x03, 164 /* System was not enabled or bad system state. */ 165 MLXSW_CMD_STATUS_BAD_SYS_STATE = 0x04, 166 /* Attempt to access reserved or unallocated resource, or resource in 167 * inappropriate ownership. 168 */ 169 MLXSW_CMD_STATUS_BAD_RESOURCE = 0x05, 170 /* Requested resource is currently executing a command. */ 171 MLXSW_CMD_STATUS_RESOURCE_BUSY = 0x06, 172 /* Required capability exceeds device limits. */ 173 MLXSW_CMD_STATUS_EXCEED_LIM = 0x08, 174 /* Resource is not in the appropriate state or ownership. */ 175 MLXSW_CMD_STATUS_BAD_RES_STATE = 0x09, 176 /* Index out of range (might be beyond table size or attempt to 177 * access a reserved resource). 178 */ 179 MLXSW_CMD_STATUS_BAD_INDEX = 0x0A, 180 /* NVMEM checksum/CRC failed. */ 181 MLXSW_CMD_STATUS_BAD_NVMEM = 0x0B, 182 /* Bad management packet (silently discarded). */ 183 MLXSW_CMD_STATUS_BAD_PKT = 0x30, 184}; 185 186static inline const char *mlxsw_cmd_status_str(u8 status) 187{ 188 switch (status) { 189 case MLXSW_CMD_STATUS_OK: 190 return "OK"; 191 case MLXSW_CMD_STATUS_INTERNAL_ERR: 192 return "INTERNAL_ERR"; 193 case MLXSW_CMD_STATUS_BAD_OP: 194 return "BAD_OP"; 195 case MLXSW_CMD_STATUS_BAD_PARAM: 196 return "BAD_PARAM"; 197 case MLXSW_CMD_STATUS_BAD_SYS_STATE: 198 return "BAD_SYS_STATE"; 199 case MLXSW_CMD_STATUS_BAD_RESOURCE: 200 return "BAD_RESOURCE"; 201 case MLXSW_CMD_STATUS_RESOURCE_BUSY: 202 return "RESOURCE_BUSY"; 203 case MLXSW_CMD_STATUS_EXCEED_LIM: 204 return "EXCEED_LIM"; 205 case MLXSW_CMD_STATUS_BAD_RES_STATE: 206 return "BAD_RES_STATE"; 207 case MLXSW_CMD_STATUS_BAD_INDEX: 208 return "BAD_INDEX"; 209 case MLXSW_CMD_STATUS_BAD_NVMEM: 210 return "BAD_NVMEM"; 211 case MLXSW_CMD_STATUS_BAD_PKT: 212 return "BAD_PKT"; 213 default: 214 return "*UNKNOWN*"; 215 } 216} 217 218/* QUERY_FW - Query Firmware 219 * ------------------------- 220 * OpMod == 0, INMmod == 0 221 * ----------------------- 222 * The QUERY_FW command retrieves information related to firmware, command 223 * interface version and the amount of resources that should be allocated to 224 * the firmware. 225 */ 226 227static inline int mlxsw_cmd_query_fw(struct mlxsw_core *mlxsw_core, 228 char *out_mbox) 229{ 230 return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_FW, 231 0, 0, false, out_mbox, MLXSW_CMD_MBOX_SIZE); 232} 233 234/* cmd_mbox_query_fw_fw_pages 235 * Amount of physical memory to be allocatedfor firmware usage in 4KB pages. 236 */ 237MLXSW_ITEM32(cmd_mbox, query_fw, fw_pages, 0x00, 16, 16); 238 239/* cmd_mbox_query_fw_fw_rev_major 240 * Firmware Revision - Major 241 */ 242MLXSW_ITEM32(cmd_mbox, query_fw, fw_rev_major, 0x00, 0, 16); 243 244/* cmd_mbox_query_fw_fw_rev_subminor 245 * Firmware Sub-minor version (Patch level) 246 */ 247MLXSW_ITEM32(cmd_mbox, query_fw, fw_rev_subminor, 0x04, 16, 16); 248 249/* cmd_mbox_query_fw_fw_rev_minor 250 * Firmware Revision - Minor 251 */ 252MLXSW_ITEM32(cmd_mbox, query_fw, fw_rev_minor, 0x04, 0, 16); 253 254/* cmd_mbox_query_fw_core_clk 255 * Internal Clock Frequency (in MHz) 256 */ 257MLXSW_ITEM32(cmd_mbox, query_fw, core_clk, 0x08, 16, 16); 258 259/* cmd_mbox_query_fw_cmd_interface_rev 260 * Command Interface Interpreter Revision ID. This number is bumped up 261 * every time a non-backward-compatible change is done for the command 262 * interface. The current cmd_interface_rev is 1. 263 */ 264MLXSW_ITEM32(cmd_mbox, query_fw, cmd_interface_rev, 0x08, 0, 16); 265 266/* cmd_mbox_query_fw_dt 267 * If set, Debug Trace is supported 268 */ 269MLXSW_ITEM32(cmd_mbox, query_fw, dt, 0x0C, 31, 1); 270 271/* cmd_mbox_query_fw_api_version 272 * Indicates the version of the API, to enable software querying 273 * for compatibility. The current api_version is 1. 274 */ 275MLXSW_ITEM32(cmd_mbox, query_fw, api_version, 0x0C, 0, 16); 276 277/* cmd_mbox_query_fw_fw_hour 278 * Firmware timestamp - hour 279 */ 280MLXSW_ITEM32(cmd_mbox, query_fw, fw_hour, 0x10, 24, 8); 281 282/* cmd_mbox_query_fw_fw_minutes 283 * Firmware timestamp - minutes 284 */ 285MLXSW_ITEM32(cmd_mbox, query_fw, fw_minutes, 0x10, 16, 8); 286 287/* cmd_mbox_query_fw_fw_seconds 288 * Firmware timestamp - seconds 289 */ 290MLXSW_ITEM32(cmd_mbox, query_fw, fw_seconds, 0x10, 8, 8); 291 292/* cmd_mbox_query_fw_fw_year 293 * Firmware timestamp - year 294 */ 295MLXSW_ITEM32(cmd_mbox, query_fw, fw_year, 0x14, 16, 16); 296 297/* cmd_mbox_query_fw_fw_month 298 * Firmware timestamp - month 299 */ 300MLXSW_ITEM32(cmd_mbox, query_fw, fw_month, 0x14, 8, 8); 301 302/* cmd_mbox_query_fw_fw_day 303 * Firmware timestamp - day 304 */ 305MLXSW_ITEM32(cmd_mbox, query_fw, fw_day, 0x14, 0, 8); 306 307/* cmd_mbox_query_fw_clr_int_base_offset 308 * Clear Interrupt register's offset from clr_int_bar register 309 * in PCI address space. 310 */ 311MLXSW_ITEM64(cmd_mbox, query_fw, clr_int_base_offset, 0x20, 0, 64); 312 313/* cmd_mbox_query_fw_clr_int_bar 314 * PCI base address register (BAR) where clr_int register is located. 315 * 00 - BAR 0-1 (64 bit BAR) 316 */ 317MLXSW_ITEM32(cmd_mbox, query_fw, clr_int_bar, 0x28, 30, 2); 318 319/* cmd_mbox_query_fw_error_buf_offset 320 * Read Only buffer for internal error reports of offset 321 * from error_buf_bar register in PCI address space). 322 */ 323MLXSW_ITEM64(cmd_mbox, query_fw, error_buf_offset, 0x30, 0, 64); 324 325/* cmd_mbox_query_fw_error_buf_size 326 * Internal error buffer size in DWORDs 327 */ 328MLXSW_ITEM32(cmd_mbox, query_fw, error_buf_size, 0x38, 0, 32); 329 330/* cmd_mbox_query_fw_error_int_bar 331 * PCI base address register (BAR) where error buffer 332 * register is located. 333 * 00 - BAR 0-1 (64 bit BAR) 334 */ 335MLXSW_ITEM32(cmd_mbox, query_fw, error_int_bar, 0x3C, 30, 2); 336 337/* cmd_mbox_query_fw_doorbell_page_offset 338 * Offset of the doorbell page 339 */ 340MLXSW_ITEM64(cmd_mbox, query_fw, doorbell_page_offset, 0x40, 0, 64); 341 342/* cmd_mbox_query_fw_doorbell_page_bar 343 * PCI base address register (BAR) of the doorbell page 344 * 00 - BAR 0-1 (64 bit BAR) 345 */ 346MLXSW_ITEM32(cmd_mbox, query_fw, doorbell_page_bar, 0x48, 30, 2); 347 348/* QUERY_BOARDINFO - Query Board Information 349 * ----------------------------------------- 350 * OpMod == 0 (N/A), INMmod == 0 (N/A) 351 * ----------------------------------- 352 * The QUERY_BOARDINFO command retrieves adapter specific parameters. 353 */ 354 355static inline int mlxsw_cmd_boardinfo(struct mlxsw_core *mlxsw_core, 356 char *out_mbox) 357{ 358 return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_BOARDINFO, 359 0, 0, false, out_mbox, MLXSW_CMD_MBOX_SIZE); 360} 361 362/* cmd_mbox_boardinfo_intapin 363 * When PCIe interrupt messages are being used, this value is used for clearing 364 * an interrupt. When using MSI-X, this register is not used. 365 */ 366MLXSW_ITEM32(cmd_mbox, boardinfo, intapin, 0x10, 24, 8); 367 368/* cmd_mbox_boardinfo_vsd_vendor_id 369 * PCISIG Vendor ID (www.pcisig.com/membership/vid_search) of the vendor 370 * specifying/formatting the VSD. The vsd_vendor_id identifies the management 371 * domain of the VSD/PSID data. Different vendors may choose different VSD/PSID 372 * format and encoding as long as they use their assigned vsd_vendor_id. 373 */ 374MLXSW_ITEM32(cmd_mbox, boardinfo, vsd_vendor_id, 0x1C, 0, 16); 375 376/* cmd_mbox_boardinfo_vsd 377 * Vendor Specific Data. The VSD string that is burnt to the Flash 378 * with the firmware. 379 */ 380#define MLXSW_CMD_BOARDINFO_VSD_LEN 208 381MLXSW_ITEM_BUF(cmd_mbox, boardinfo, vsd, 0x20, MLXSW_CMD_BOARDINFO_VSD_LEN); 382 383/* cmd_mbox_boardinfo_psid 384 * The PSID field is a 16-ascii (byte) character string which acts as 385 * the board ID. The PSID format is used in conjunction with 386 * Mellanox vsd_vendor_id (15B3h). 387 */ 388#define MLXSW_CMD_BOARDINFO_PSID_LEN 16 389MLXSW_ITEM_BUF(cmd_mbox, boardinfo, psid, 0xF0, MLXSW_CMD_BOARDINFO_PSID_LEN); 390 391/* QUERY_AQ_CAP - Query Asynchronous Queues Capabilities 392 * ----------------------------------------------------- 393 * OpMod == 0 (N/A), INMmod == 0 (N/A) 394 * ----------------------------------- 395 * The QUERY_AQ_CAP command returns the device asynchronous queues 396 * capabilities supported. 397 */ 398 399static inline int mlxsw_cmd_query_aq_cap(struct mlxsw_core *mlxsw_core, 400 char *out_mbox) 401{ 402 return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_AQ_CAP, 403 0, 0, false, out_mbox, MLXSW_CMD_MBOX_SIZE); 404} 405 406/* cmd_mbox_query_aq_cap_log_max_sdq_sz 407 * Log (base 2) of max WQEs allowed on SDQ. 408 */ 409MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_sdq_sz, 0x00, 24, 8); 410 411/* cmd_mbox_query_aq_cap_max_num_sdqs 412 * Maximum number of SDQs. 413 */ 414MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_sdqs, 0x00, 0, 8); 415 416/* cmd_mbox_query_aq_cap_log_max_rdq_sz 417 * Log (base 2) of max WQEs allowed on RDQ. 418 */ 419MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_rdq_sz, 0x04, 24, 8); 420 421/* cmd_mbox_query_aq_cap_max_num_rdqs 422 * Maximum number of RDQs. 423 */ 424MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_rdqs, 0x04, 0, 8); 425 426/* cmd_mbox_query_aq_cap_log_max_cq_sz 427 * Log (base 2) of max CQEs allowed on CQ. 428 */ 429MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_cq_sz, 0x08, 24, 8); 430 431/* cmd_mbox_query_aq_cap_max_num_cqs 432 * Maximum number of CQs. 433 */ 434MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_cqs, 0x08, 0, 8); 435 436/* cmd_mbox_query_aq_cap_log_max_eq_sz 437 * Log (base 2) of max EQEs allowed on EQ. 438 */ 439MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_eq_sz, 0x0C, 24, 8); 440 441/* cmd_mbox_query_aq_cap_max_num_eqs 442 * Maximum number of EQs. 443 */ 444MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_eqs, 0x0C, 0, 8); 445 446/* cmd_mbox_query_aq_cap_max_sg_sq 447 * The maximum S/G list elements in an DSQ. DSQ must not contain 448 * more S/G entries than indicated here. 449 */ 450MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_sg_sq, 0x10, 8, 8); 451 452/* cmd_mbox_query_aq_cap_ 453 * The maximum S/G list elements in an DRQ. DRQ must not contain 454 * more S/G entries than indicated here. 455 */ 456MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_sg_rq, 0x10, 0, 8); 457 458/* MAP_FA - Map Firmware Area 459 * -------------------------- 460 * OpMod == 0 (N/A), INMmod == Number of VPM entries 461 * ------------------------------------------------- 462 * The MAP_FA command passes physical pages to the switch. These pages 463 * are used to store the device firmware. MAP_FA can be executed multiple 464 * times until all the firmware area is mapped (the size that should be 465 * mapped is retrieved through the QUERY_FW command). All required pages 466 * must be mapped to finish the initialization phase. Physical memory 467 * passed in this command must be pinned. 468 */ 469 470#define MLXSW_CMD_MAP_FA_VPM_ENTRIES_MAX 32 471 472static inline int mlxsw_cmd_map_fa(struct mlxsw_core *mlxsw_core, 473 char *in_mbox, u32 vpm_entries_count) 474{ 475 return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_MAP_FA, 476 0, vpm_entries_count, 477 in_mbox, MLXSW_CMD_MBOX_SIZE); 478} 479 480/* cmd_mbox_map_fa_pa 481 * Physical Address. 482 */ 483MLXSW_ITEM64_INDEXED(cmd_mbox, map_fa, pa, 0x00, 12, 52, 0x08, 0x00, true); 484 485/* cmd_mbox_map_fa_log2size 486 * Log (base 2) of the size in 4KB pages of the physical and contiguous memory 487 * that starts at PA_L/H. 488 */ 489MLXSW_ITEM32_INDEXED(cmd_mbox, map_fa, log2size, 0x00, 0, 5, 0x08, 0x04, false); 490 491/* UNMAP_FA - Unmap Firmware Area 492 * ------------------------------ 493 * OpMod == 0 (N/A), INMmod == 0 (N/A) 494 * ----------------------------------- 495 * The UNMAP_FA command unload the firmware and unmaps all the 496 * firmware area. After this command is completed the device will not access 497 * the pages that were mapped to the firmware area. After executing UNMAP_FA 498 * command, software reset must be done prior to execution of MAP_FW command. 499 */ 500 501static inline int mlxsw_cmd_unmap_fa(struct mlxsw_core *mlxsw_core) 502{ 503 return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_UNMAP_FA, 0, 0); 504} 505 506/* QUERY_RESOURCES - Query chip resources 507 * -------------------------------------- 508 * OpMod == 0 (N/A) , INMmod is index 509 * ---------------------------------- 510 * The QUERY_RESOURCES command retrieves information related to chip resources 511 * by resource ID. Every command returns 32 entries. INmod is being use as base. 512 * for example, index 1 will return entries 32-63. When the tables end and there 513 * are no more sources in the table, will return resource id 0xFFF to indicate 514 * it. 515 */ 516 517#define MLXSW_CMD_QUERY_RESOURCES_TABLE_END_ID 0xffff 518#define MLXSW_CMD_QUERY_RESOURCES_MAX_QUERIES 100 519#define MLXSW_CMD_QUERY_RESOURCES_PER_QUERY 32 520 521static inline int mlxsw_cmd_query_resources(struct mlxsw_core *mlxsw_core, 522 char *out_mbox, int index) 523{ 524 return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_RESOURCES, 525 0, index, false, out_mbox, 526 MLXSW_CMD_MBOX_SIZE); 527} 528 529/* cmd_mbox_query_resource_id 530 * The resource id. 0xFFFF indicates table's end. 531 */ 532MLXSW_ITEM32_INDEXED(cmd_mbox, query_resource, id, 0x00, 16, 16, 0x8, 0, false); 533 534/* cmd_mbox_query_resource_data 535 * The resource 536 */ 537MLXSW_ITEM64_INDEXED(cmd_mbox, query_resource, data, 538 0x00, 0, 40, 0x8, 0, false); 539 540/* CONFIG_PROFILE (Set) - Configure Switch Profile 541 * ------------------------------ 542 * OpMod == 1 (Set), INMmod == 0 (N/A) 543 * ----------------------------------- 544 * The CONFIG_PROFILE command sets the switch profile. The command can be 545 * executed on the device only once at startup in order to allocate and 546 * configure all switch resources and prepare it for operational mode. 547 * It is not possible to change the device profile after the chip is 548 * in operational mode. 549 * Failure of the CONFIG_PROFILE command leaves the hardware in an indeterminate 550 * state therefore it is required to perform software reset to the device 551 * following an unsuccessful completion of the command. It is required 552 * to perform software reset to the device to change an existing profile. 553 */ 554 555static inline int mlxsw_cmd_config_profile_set(struct mlxsw_core *mlxsw_core, 556 char *in_mbox) 557{ 558 return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_CONFIG_PROFILE, 559 1, 0, in_mbox, MLXSW_CMD_MBOX_SIZE); 560} 561 562/* cmd_mbox_config_profile_set_max_vepa_channels 563 * Capability bit. Setting a bit to 1 configures the profile 564 * according to the mailbox contents. 565 */ 566MLXSW_ITEM32(cmd_mbox, config_profile, set_max_vepa_channels, 0x0C, 0, 1); 567 568/* cmd_mbox_config_profile_set_max_lag 569 * Capability bit. Setting a bit to 1 configures the profile 570 * according to the mailbox contents. 571 */ 572MLXSW_ITEM32(cmd_mbox, config_profile, set_max_lag, 0x0C, 1, 1); 573 574/* cmd_mbox_config_profile_set_max_port_per_lag 575 * Capability bit. Setting a bit to 1 configures the profile 576 * according to the mailbox contents. 577 */ 578MLXSW_ITEM32(cmd_mbox, config_profile, set_max_port_per_lag, 0x0C, 2, 1); 579 580/* cmd_mbox_config_profile_set_max_mid 581 * Capability bit. Setting a bit to 1 configures the profile 582 * according to the mailbox contents. 583 */ 584MLXSW_ITEM32(cmd_mbox, config_profile, set_max_mid, 0x0C, 3, 1); 585 586/* cmd_mbox_config_profile_set_max_pgt 587 * Capability bit. Setting a bit to 1 configures the profile 588 * according to the mailbox contents. 589 */ 590MLXSW_ITEM32(cmd_mbox, config_profile, set_max_pgt, 0x0C, 4, 1); 591 592/* cmd_mbox_config_profile_set_max_system_port 593 * Capability bit. Setting a bit to 1 configures the profile 594 * according to the mailbox contents. 595 */ 596MLXSW_ITEM32(cmd_mbox, config_profile, set_max_system_port, 0x0C, 5, 1); 597 598/* cmd_mbox_config_profile_set_max_vlan_groups 599 * Capability bit. Setting a bit to 1 configures the profile 600 * according to the mailbox contents. 601 */ 602MLXSW_ITEM32(cmd_mbox, config_profile, set_max_vlan_groups, 0x0C, 6, 1); 603 604/* cmd_mbox_config_profile_set_max_regions 605 * Capability bit. Setting a bit to 1 configures the profile 606 * according to the mailbox contents. 607 */ 608MLXSW_ITEM32(cmd_mbox, config_profile, set_max_regions, 0x0C, 7, 1); 609 610/* cmd_mbox_config_profile_set_flood_mode 611 * Capability bit. Setting a bit to 1 configures the profile 612 * according to the mailbox contents. 613 */ 614MLXSW_ITEM32(cmd_mbox, config_profile, set_flood_mode, 0x0C, 8, 1); 615 616/* cmd_mbox_config_profile_set_max_flood_tables 617 * Capability bit. Setting a bit to 1 configures the profile 618 * according to the mailbox contents. 619 */ 620MLXSW_ITEM32(cmd_mbox, config_profile, set_flood_tables, 0x0C, 9, 1); 621 622/* cmd_mbox_config_profile_set_max_ib_mc 623 * Capability bit. Setting a bit to 1 configures the profile 624 * according to the mailbox contents. 625 */ 626MLXSW_ITEM32(cmd_mbox, config_profile, set_max_ib_mc, 0x0C, 12, 1); 627 628/* cmd_mbox_config_profile_set_max_pkey 629 * Capability bit. Setting a bit to 1 configures the profile 630 * according to the mailbox contents. 631 */ 632MLXSW_ITEM32(cmd_mbox, config_profile, set_max_pkey, 0x0C, 13, 1); 633 634/* cmd_mbox_config_profile_set_adaptive_routing_group_cap 635 * Capability bit. Setting a bit to 1 configures the profile 636 * according to the mailbox contents. 637 */ 638MLXSW_ITEM32(cmd_mbox, config_profile, 639 set_adaptive_routing_group_cap, 0x0C, 14, 1); 640 641/* cmd_mbox_config_profile_set_ar_sec 642 * Capability bit. Setting a bit to 1 configures the profile 643 * according to the mailbox contents. 644 */ 645MLXSW_ITEM32(cmd_mbox, config_profile, set_ar_sec, 0x0C, 15, 1); 646 647/* cmd_mbox_config_set_kvd_linear_size 648 * Capability bit. Setting a bit to 1 configures the profile 649 * according to the mailbox contents. 650 */ 651MLXSW_ITEM32(cmd_mbox, config_profile, set_kvd_linear_size, 0x0C, 24, 1); 652 653/* cmd_mbox_config_set_kvd_hash_single_size 654 * Capability bit. Setting a bit to 1 configures the profile 655 * according to the mailbox contents. 656 */ 657MLXSW_ITEM32(cmd_mbox, config_profile, set_kvd_hash_single_size, 0x0C, 25, 1); 658 659/* cmd_mbox_config_set_kvd_hash_double_size 660 * Capability bit. Setting a bit to 1 configures the profile 661 * according to the mailbox contents. 662 */ 663MLXSW_ITEM32(cmd_mbox, config_profile, set_kvd_hash_double_size, 0x0C, 26, 1); 664 665/* cmd_mbox_config_profile_max_vepa_channels 666 * Maximum number of VEPA channels per port (0 through 16) 667 * 0 - multi-channel VEPA is disabled 668 */ 669MLXSW_ITEM32(cmd_mbox, config_profile, max_vepa_channels, 0x10, 0, 8); 670 671/* cmd_mbox_config_profile_max_lag 672 * Maximum number of LAG IDs requested. 673 */ 674MLXSW_ITEM32(cmd_mbox, config_profile, max_lag, 0x14, 0, 16); 675 676/* cmd_mbox_config_profile_max_port_per_lag 677 * Maximum number of ports per LAG requested. 678 */ 679MLXSW_ITEM32(cmd_mbox, config_profile, max_port_per_lag, 0x18, 0, 16); 680 681/* cmd_mbox_config_profile_max_mid 682 * Maximum Multicast IDs. 683 * Multicast IDs are allocated from 0 to max_mid-1 684 */ 685MLXSW_ITEM32(cmd_mbox, config_profile, max_mid, 0x1C, 0, 16); 686 687/* cmd_mbox_config_profile_max_pgt 688 * Maximum records in the Port Group Table per Switch Partition. 689 * Port Group Table indexes are from 0 to max_pgt-1 690 */ 691MLXSW_ITEM32(cmd_mbox, config_profile, max_pgt, 0x20, 0, 16); 692 693/* cmd_mbox_config_profile_max_system_port 694 * The maximum number of system ports that can be allocated. 695 */ 696MLXSW_ITEM32(cmd_mbox, config_profile, max_system_port, 0x24, 0, 16); 697 698/* cmd_mbox_config_profile_max_vlan_groups 699 * Maximum number VLAN Groups for VLAN binding. 700 */ 701MLXSW_ITEM32(cmd_mbox, config_profile, max_vlan_groups, 0x28, 0, 12); 702 703/* cmd_mbox_config_profile_max_regions 704 * Maximum number of TCAM Regions. 705 */ 706MLXSW_ITEM32(cmd_mbox, config_profile, max_regions, 0x2C, 0, 16); 707 708/* cmd_mbox_config_profile_max_flood_tables 709 * Maximum number of single-entry flooding tables. Different flooding tables 710 * can be associated with different packet types. 711 */ 712MLXSW_ITEM32(cmd_mbox, config_profile, max_flood_tables, 0x30, 16, 4); 713 714/* cmd_mbox_config_profile_max_vid_flood_tables 715 * Maximum number of per-vid flooding tables. Flooding tables are associated 716 * to the different packet types for the different switch partitions. 717 * Table size is 4K entries covering all VID space. 718 */ 719MLXSW_ITEM32(cmd_mbox, config_profile, max_vid_flood_tables, 0x30, 8, 4); 720 721/* cmd_mbox_config_profile_flood_mode 722 * Flooding mode to use. 723 * 0-2 - Backward compatible modes for SwitchX devices. 724 * 3 - Mixed mode, where: 725 * max_flood_tables indicates the number of single-entry tables. 726 * max_vid_flood_tables indicates the number of per-VID tables. 727 * max_fid_offset_flood_tables indicates the number of FID-offset tables. 728 * max_fid_flood_tables indicates the number of per-FID tables. 729 */ 730MLXSW_ITEM32(cmd_mbox, config_profile, flood_mode, 0x30, 0, 2); 731 732/* cmd_mbox_config_profile_max_fid_offset_flood_tables 733 * Maximum number of FID-offset flooding tables. 734 */ 735MLXSW_ITEM32(cmd_mbox, config_profile, 736 max_fid_offset_flood_tables, 0x34, 24, 4); 737 738/* cmd_mbox_config_profile_fid_offset_flood_table_size 739 * The size (number of entries) of each FID-offset flood table. 740 */ 741MLXSW_ITEM32(cmd_mbox, config_profile, 742 fid_offset_flood_table_size, 0x34, 0, 16); 743 744/* cmd_mbox_config_profile_max_fid_flood_tables 745 * Maximum number of per-FID flooding tables. 746 * 747 * Note: This flooding tables cover special FIDs only (vFIDs), starting at 748 * FID value 4K and higher. 749 */ 750MLXSW_ITEM32(cmd_mbox, config_profile, max_fid_flood_tables, 0x38, 24, 4); 751 752/* cmd_mbox_config_profile_fid_flood_table_size 753 * The size (number of entries) of each per-FID table. 754 */ 755MLXSW_ITEM32(cmd_mbox, config_profile, fid_flood_table_size, 0x38, 0, 16); 756 757/* cmd_mbox_config_profile_max_ib_mc 758 * Maximum number of multicast FDB records for InfiniBand 759 * FDB (in 512 chunks) per InfiniBand switch partition. 760 */ 761MLXSW_ITEM32(cmd_mbox, config_profile, max_ib_mc, 0x40, 0, 15); 762 763/* cmd_mbox_config_profile_max_pkey 764 * Maximum per port PKEY table size (for PKEY enforcement) 765 */ 766MLXSW_ITEM32(cmd_mbox, config_profile, max_pkey, 0x44, 0, 15); 767 768/* cmd_mbox_config_profile_ar_sec 769 * Primary/secondary capability 770 * Describes the number of adaptive routing sub-groups 771 * 0 - disable primary/secondary (single group) 772 * 1 - enable primary/secondary (2 sub-groups) 773 * 2 - 3 sub-groups: Not supported in SwitchX, SwitchX-2 774 * 3 - 4 sub-groups: Not supported in SwitchX, SwitchX-2 775 */ 776MLXSW_ITEM32(cmd_mbox, config_profile, ar_sec, 0x4C, 24, 2); 777 778/* cmd_mbox_config_profile_adaptive_routing_group_cap 779 * Adaptive Routing Group Capability. Indicates the number of AR groups 780 * supported. Note that when Primary/secondary is enabled, each 781 * primary/secondary couple consumes 2 adaptive routing entries. 782 */ 783MLXSW_ITEM32(cmd_mbox, config_profile, adaptive_routing_group_cap, 0x4C, 0, 16); 784 785/* cmd_mbox_config_profile_arn 786 * Adaptive Routing Notification Enable 787 * Not supported in SwitchX, SwitchX-2 788 */ 789MLXSW_ITEM32(cmd_mbox, config_profile, arn, 0x50, 31, 1); 790 791/* cmd_mbox_config_kvd_linear_size 792 * KVD Linear Size 793 * Valid for Spectrum only 794 * Allowed values are 128*N where N=0 or higher 795 */ 796MLXSW_ITEM32(cmd_mbox, config_profile, kvd_linear_size, 0x54, 0, 24); 797 798/* cmd_mbox_config_kvd_hash_single_size 799 * KVD Hash single-entries size 800 * Valid for Spectrum only 801 * Allowed values are 128*N where N=0 or higher 802 * Must be greater or equal to cap_min_kvd_hash_single_size 803 * Must be smaller or equal to cap_kvd_size - kvd_linear_size 804 */ 805MLXSW_ITEM32(cmd_mbox, config_profile, kvd_hash_single_size, 0x58, 0, 24); 806 807/* cmd_mbox_config_kvd_hash_double_size 808 * KVD Hash double-entries size (units of single-size entries) 809 * Valid for Spectrum only 810 * Allowed values are 128*N where N=0 or higher 811 * Must be either 0 or greater or equal to cap_min_kvd_hash_double_size 812 * Must be smaller or equal to cap_kvd_size - kvd_linear_size 813 */ 814MLXSW_ITEM32(cmd_mbox, config_profile, kvd_hash_double_size, 0x5C, 0, 24); 815 816/* cmd_mbox_config_profile_swid_config_mask 817 * Modify Switch Partition Configuration mask. When set, the configu- 818 * ration value for the Switch Partition are taken from the mailbox. 819 * When clear, the current configuration values are used. 820 * Bit 0 - set type 821 * Bit 1 - properties 822 * Other - reserved 823 */ 824MLXSW_ITEM32_INDEXED(cmd_mbox, config_profile, swid_config_mask, 825 0x60, 24, 8, 0x08, 0x00, false); 826 827/* cmd_mbox_config_profile_swid_config_type 828 * Switch Partition type. 829 * 0000 - disabled (Switch Partition does not exist) 830 * 0001 - InfiniBand 831 * 0010 - Ethernet 832 * 1000 - router port (SwitchX-2 only) 833 * Other - reserved 834 */ 835MLXSW_ITEM32_INDEXED(cmd_mbox, config_profile, swid_config_type, 836 0x60, 20, 4, 0x08, 0x00, false); 837 838/* cmd_mbox_config_profile_swid_config_properties 839 * Switch Partition properties. 840 */ 841MLXSW_ITEM32_INDEXED(cmd_mbox, config_profile, swid_config_properties, 842 0x60, 0, 8, 0x08, 0x00, false); 843 844/* ACCESS_REG - Access EMAD Supported Register 845 * ---------------------------------- 846 * OpMod == 0 (N/A), INMmod == 0 (N/A) 847 * ------------------------------------- 848 * The ACCESS_REG command supports accessing device registers. This access 849 * is mainly used for bootstrapping. 850 */ 851 852static inline int mlxsw_cmd_access_reg(struct mlxsw_core *mlxsw_core, 853 char *in_mbox, char *out_mbox) 854{ 855 return mlxsw_cmd_exec(mlxsw_core, MLXSW_CMD_OPCODE_ACCESS_REG, 856 0, 0, false, in_mbox, MLXSW_CMD_MBOX_SIZE, 857 out_mbox, MLXSW_CMD_MBOX_SIZE); 858} 859 860/* SW2HW_DQ - Software to Hardware DQ 861 * ---------------------------------- 862 * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ) 863 * INMmod == DQ number 864 * ---------------------------------------------- 865 * The SW2HW_DQ command transitions a descriptor queue from software to 866 * hardware ownership. The command enables posting WQEs and ringing DoorBells 867 * on the descriptor queue. 868 */ 869 870static inline int __mlxsw_cmd_sw2hw_dq(struct mlxsw_core *mlxsw_core, 871 char *in_mbox, u32 dq_number, 872 u8 opcode_mod) 873{ 874 return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_SW2HW_DQ, 875 opcode_mod, dq_number, 876 in_mbox, MLXSW_CMD_MBOX_SIZE); 877} 878 879enum { 880 MLXSW_CMD_OPCODE_MOD_SDQ = 0, 881 MLXSW_CMD_OPCODE_MOD_RDQ = 1, 882}; 883 884static inline int mlxsw_cmd_sw2hw_sdq(struct mlxsw_core *mlxsw_core, 885 char *in_mbox, u32 dq_number) 886{ 887 return __mlxsw_cmd_sw2hw_dq(mlxsw_core, in_mbox, dq_number, 888 MLXSW_CMD_OPCODE_MOD_SDQ); 889} 890 891static inline int mlxsw_cmd_sw2hw_rdq(struct mlxsw_core *mlxsw_core, 892 char *in_mbox, u32 dq_number) 893{ 894 return __mlxsw_cmd_sw2hw_dq(mlxsw_core, in_mbox, dq_number, 895 MLXSW_CMD_OPCODE_MOD_RDQ); 896} 897 898/* cmd_mbox_sw2hw_dq_cq 899 * Number of the CQ that this Descriptor Queue reports completions to. 900 */ 901MLXSW_ITEM32(cmd_mbox, sw2hw_dq, cq, 0x00, 24, 8); 902 903/* cmd_mbox_sw2hw_dq_sdq_tclass 904 * SDQ: CPU Egress TClass 905 * RDQ: Reserved 906 */ 907MLXSW_ITEM32(cmd_mbox, sw2hw_dq, sdq_tclass, 0x00, 16, 6); 908 909/* cmd_mbox_sw2hw_dq_log2_dq_sz 910 * Log (base 2) of the Descriptor Queue size in 4KB pages. 911 */ 912MLXSW_ITEM32(cmd_mbox, sw2hw_dq, log2_dq_sz, 0x00, 0, 6); 913 914/* cmd_mbox_sw2hw_dq_pa 915 * Physical Address. 916 */ 917MLXSW_ITEM64_INDEXED(cmd_mbox, sw2hw_dq, pa, 0x10, 12, 52, 0x08, 0x00, true); 918 919/* HW2SW_DQ - Hardware to Software DQ 920 * ---------------------------------- 921 * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ) 922 * INMmod == DQ number 923 * ---------------------------------------------- 924 * The HW2SW_DQ command transitions a descriptor queue from hardware to 925 * software ownership. Incoming packets on the DQ are silently discarded, 926 * SW should not post descriptors on nonoperational DQs. 927 */ 928 929static inline int __mlxsw_cmd_hw2sw_dq(struct mlxsw_core *mlxsw_core, 930 u32 dq_number, u8 opcode_mod) 931{ 932 return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_HW2SW_DQ, 933 opcode_mod, dq_number); 934} 935 936static inline int mlxsw_cmd_hw2sw_sdq(struct mlxsw_core *mlxsw_core, 937 u32 dq_number) 938{ 939 return __mlxsw_cmd_hw2sw_dq(mlxsw_core, dq_number, 940 MLXSW_CMD_OPCODE_MOD_SDQ); 941} 942 943static inline int mlxsw_cmd_hw2sw_rdq(struct mlxsw_core *mlxsw_core, 944 u32 dq_number) 945{ 946 return __mlxsw_cmd_hw2sw_dq(mlxsw_core, dq_number, 947 MLXSW_CMD_OPCODE_MOD_RDQ); 948} 949 950/* 2ERR_DQ - To Error DQ 951 * --------------------- 952 * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ) 953 * INMmod == DQ number 954 * ---------------------------------------------- 955 * The 2ERR_DQ command transitions the DQ into the error state from the state 956 * in which it has been. While the command is executed, some in-process 957 * descriptors may complete. Once the DQ transitions into the error state, 958 * if there are posted descriptors on the RDQ/SDQ, the hardware writes 959 * a completion with error (flushed) for all descriptors posted in the RDQ/SDQ. 960 * When the command is completed successfully, the DQ is already in 961 * the error state. 962 */ 963 964static inline int __mlxsw_cmd_2err_dq(struct mlxsw_core *mlxsw_core, 965 u32 dq_number, u8 opcode_mod) 966{ 967 return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_2ERR_DQ, 968 opcode_mod, dq_number); 969} 970 971static inline int mlxsw_cmd_2err_sdq(struct mlxsw_core *mlxsw_core, 972 u32 dq_number) 973{ 974 return __mlxsw_cmd_2err_dq(mlxsw_core, dq_number, 975 MLXSW_CMD_OPCODE_MOD_SDQ); 976} 977 978static inline int mlxsw_cmd_2err_rdq(struct mlxsw_core *mlxsw_core, 979 u32 dq_number) 980{ 981 return __mlxsw_cmd_2err_dq(mlxsw_core, dq_number, 982 MLXSW_CMD_OPCODE_MOD_RDQ); 983} 984 985/* QUERY_DQ - Query DQ 986 * --------------------- 987 * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ) 988 * INMmod == DQ number 989 * ---------------------------------------------- 990 * The QUERY_DQ command retrieves a snapshot of DQ parameters from the hardware. 991 * 992 * Note: Output mailbox has the same format as SW2HW_DQ. 993 */ 994 995static inline int __mlxsw_cmd_query_dq(struct mlxsw_core *mlxsw_core, 996 char *out_mbox, u32 dq_number, 997 u8 opcode_mod) 998{ 999 return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_2ERR_DQ, 1000 opcode_mod, dq_number, false,
1001 out_mbox, MLXSW_CMD_MBOX_SIZE); 1002} 1003 1004static inline int mlxsw_cmd_query_sdq(struct mlxsw_core *mlxsw_core, 1005 char *out_mbox, u32 dq_number) 1006{ 1007 return __mlxsw_cmd_query_dq(mlxsw_core, out_mbox, dq_number, 1008 MLXSW_CMD_OPCODE_MOD_SDQ); 1009} 1010 1011static inline int mlxsw_cmd_query_rdq(struct mlxsw_core *mlxsw_core, 1012 char *out_mbox, u32 dq_number) 1013{ 1014 return __mlxsw_cmd_query_dq(mlxsw_core, out_mbox, dq_number, 1015 MLXSW_CMD_OPCODE_MOD_RDQ); 1016} 1017 1018/* SW2HW_CQ - Software to Hardware CQ 1019 * ---------------------------------- 1020 * OpMod == 0 (N/A), INMmod == CQ number 1021 * ------------------------------------- 1022 * The SW2HW_CQ command transfers ownership of a CQ context entry from software 1023 * to hardware. The command takes the CQ context entry from the input mailbox 1024 * and stores it in the CQC in the ownership of the hardware. The command fails 1025 * if the requested CQC entry is already in the ownership of the hardware. 1026 */ 1027 1028static inline int mlxsw_cmd_sw2hw_cq(struct mlxsw_core *mlxsw_core, 1029 char *in_mbox, u32 cq_number) 1030{ 1031 return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_SW2HW_CQ, 1032 0, cq_number, in_mbox, MLXSW_CMD_MBOX_SIZE); 1033} 1034 1035/* cmd_mbox_sw2hw_cq_cv 1036 * CQE Version. 1037 * 0 - CQE Version 0, 1 - CQE Version 1 1038 */ 1039MLXSW_ITEM32(cmd_mbox, sw2hw_cq, cv, 0x00, 28, 4); 1040 1041/* cmd_mbox_sw2hw_cq_c_eqn 1042 * Event Queue this CQ reports completion events to. 1043 */ 1044MLXSW_ITEM32(cmd_mbox, sw2hw_cq, c_eqn, 0x00, 24, 1); 1045 1046/* cmd_mbox_sw2hw_cq_st 1047 * Event delivery state machine 1048 * 0x0 - FIRED 1049 * 0x1 - ARMED (Request for Notification) 1050 */ 1051MLXSW_ITEM32(cmd_mbox, sw2hw_cq, st, 0x00, 8, 1); 1052 1053/* cmd_mbox_sw2hw_cq_log_cq_size 1054 * Log (base 2) of the CQ size (in entries). 1055 */ 1056MLXSW_ITEM32(cmd_mbox, sw2hw_cq, log_cq_size, 0x00, 0, 4); 1057 1058/* cmd_mbox_sw2hw_cq_producer_counter 1059 * Producer Counter. The counter is incremented for each CQE that is 1060 * written by the HW to the CQ. 1061 * Maintained by HW (valid for the QUERY_CQ command only) 1062 */ 1063MLXSW_ITEM32(cmd_mbox, sw2hw_cq, producer_counter, 0x04, 0, 16); 1064 1065/* cmd_mbox_sw2hw_cq_pa 1066 * Physical Address. 1067 */ 1068MLXSW_ITEM64_INDEXED(cmd_mbox, sw2hw_cq, pa, 0x10, 11, 53, 0x08, 0x00, true); 1069 1070/* HW2SW_CQ - Hardware to Software CQ 1071 * ---------------------------------- 1072 * OpMod == 0 (N/A), INMmod == CQ number 1073 * ------------------------------------- 1074 * The HW2SW_CQ command transfers ownership of a CQ context entry from hardware 1075 * to software. The CQC entry is invalidated as a result of this command. 1076 */ 1077 1078static inline int mlxsw_cmd_hw2sw_cq(struct mlxsw_core *mlxsw_core, 1079 u32 cq_number) 1080{ 1081 return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_HW2SW_CQ, 1082 0, cq_number); 1083} 1084 1085/* QUERY_CQ - Query CQ 1086 * ---------------------------------- 1087 * OpMod == 0 (N/A), INMmod == CQ number 1088 * ------------------------------------- 1089 * The QUERY_CQ command retrieves a snapshot of the current CQ context entry. 1090 * The command stores the snapshot in the output mailbox in the software format. 1091 * Note that the CQ context state and values are not affected by the QUERY_CQ 1092 * command. The QUERY_CQ command is for debug purposes only. 1093 * 1094 * Note: Output mailbox has the same format as SW2HW_CQ. 1095 */ 1096 1097static inline int mlxsw_cmd_query_cq(struct mlxsw_core *mlxsw_core, 1098 char *out_mbox, u32 cq_number) 1099{ 1100 return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_CQ, 1101 0, cq_number, false, 1102 out_mbox, MLXSW_CMD_MBOX_SIZE); 1103} 1104 1105/* SW2HW_EQ - Software to Hardware EQ 1106 * ---------------------------------- 1107 * OpMod == 0 (N/A), INMmod == EQ number 1108 * ------------------------------------- 1109 * The SW2HW_EQ command transfers ownership of an EQ context entry from software 1110 * to hardware. The command takes the EQ context entry from the input mailbox 1111 * and stores it in the EQC in the ownership of the hardware. The command fails 1112 * if the requested EQC entry is already in the ownership of the hardware. 1113 */ 1114 1115static inline int mlxsw_cmd_sw2hw_eq(struct mlxsw_core *mlxsw_core, 1116 char *in_mbox, u32 eq_number) 1117{ 1118 return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_SW2HW_EQ, 1119 0, eq_number, in_mbox, MLXSW_CMD_MBOX_SIZE); 1120} 1121 1122/* cmd_mbox_sw2hw_eq_int_msix 1123 * When set, MSI-X cycles will be generated by this EQ. 1124 * When cleared, an interrupt will be generated by this EQ. 1125 */ 1126MLXSW_ITEM32(cmd_mbox, sw2hw_eq, int_msix, 0x00, 24, 1); 1127 1128/* cmd_mbox_sw2hw_eq_st 1129 * Event delivery state machine 1130 * 0x0 - FIRED 1131 * 0x1 - ARMED (Request for Notification) 1132 * 0x11 - Always ARMED 1133 * other - reserved 1134 */ 1135MLXSW_ITEM32(cmd_mbox, sw2hw_eq, st, 0x00, 8, 2); 1136 1137/* cmd_mbox_sw2hw_eq_log_eq_size 1138 * Log (base 2) of the EQ size (in entries). 1139 */ 1140MLXSW_ITEM32(cmd_mbox, sw2hw_eq, log_eq_size, 0x00, 0, 4); 1141 1142/* cmd_mbox_sw2hw_eq_producer_counter 1143 * Producer Counter. The counter is incremented for each EQE that is written 1144 * by the HW to the EQ. 1145 * Maintained by HW (valid for the QUERY_EQ command only) 1146 */ 1147MLXSW_ITEM32(cmd_mbox, sw2hw_eq, producer_counter, 0x04, 0, 16); 1148 1149/* cmd_mbox_sw2hw_eq_pa 1150 * Physical Address. 1151 */ 1152MLXSW_ITEM64_INDEXED(cmd_mbox, sw2hw_eq, pa, 0x10, 11, 53, 0x08, 0x00, true); 1153 1154/* HW2SW_EQ - Hardware to Software EQ 1155 * ---------------------------------- 1156 * OpMod == 0 (N/A), INMmod == EQ number 1157 * ------------------------------------- 1158 */ 1159 1160static inline int mlxsw_cmd_hw2sw_eq(struct mlxsw_core *mlxsw_core, 1161 u32 eq_number) 1162{ 1163 return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_HW2SW_EQ, 1164 0, eq_number); 1165} 1166 1167/* QUERY_EQ - Query EQ 1168 * ---------------------------------- 1169 * OpMod == 0 (N/A), INMmod == EQ number 1170 * ------------------------------------- 1171 * 1172 * Note: Output mailbox has the same format as SW2HW_EQ. 1173 */ 1174 1175static inline int mlxsw_cmd_query_eq(struct mlxsw_core *mlxsw_core, 1176 char *out_mbox, u32 eq_number) 1177{ 1178 return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_EQ, 1179 0, eq_number, false, 1180 out_mbox, MLXSW_CMD_MBOX_SIZE); 1181} 1182 1183#endif 1184