linux/drivers/net/ethernet/toshiba/spider_net.c
<<
>>
Prefs
   1/*
   2 * Network device driver for Cell Processor-Based Blade and Celleb platform
   3 *
   4 * (C) Copyright IBM Corp. 2005
   5 * (C) Copyright 2006 TOSHIBA CORPORATION
   6 *
   7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
   8 *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; either version 2, or (at your option)
  13 * any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 * GNU General Public License for more details.
  19 *
  20 * You should have received a copy of the GNU General Public License
  21 * along with this program; if not, write to the Free Software
  22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23 */
  24
  25#include <linux/compiler.h>
  26#include <linux/crc32.h>
  27#include <linux/delay.h>
  28#include <linux/etherdevice.h>
  29#include <linux/ethtool.h>
  30#include <linux/firmware.h>
  31#include <linux/if_vlan.h>
  32#include <linux/in.h>
  33#include <linux/init.h>
  34#include <linux/interrupt.h>
  35#include <linux/gfp.h>
  36#include <linux/ioport.h>
  37#include <linux/ip.h>
  38#include <linux/kernel.h>
  39#include <linux/mii.h>
  40#include <linux/module.h>
  41#include <linux/netdevice.h>
  42#include <linux/device.h>
  43#include <linux/pci.h>
  44#include <linux/skbuff.h>
  45#include <linux/tcp.h>
  46#include <linux/types.h>
  47#include <linux/vmalloc.h>
  48#include <linux/wait.h>
  49#include <linux/workqueue.h>
  50#include <linux/bitops.h>
  51#include <net/checksum.h>
  52
  53#include "spider_net.h"
  54
  55MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
  56              "<Jens.Osterkamp@de.ibm.com>");
  57MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
  58MODULE_LICENSE("GPL");
  59MODULE_VERSION(VERSION);
  60MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME);
  61
  62static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
  63static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
  64
  65module_param(rx_descriptors, int, 0444);
  66module_param(tx_descriptors, int, 0444);
  67
  68MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
  69                 "in rx chains");
  70MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
  71                 "in tx chain");
  72
  73char spider_net_driver_name[] = "spidernet";
  74
  75static const struct pci_device_id spider_net_pci_tbl[] = {
  76        { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
  77          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
  78        { 0, }
  79};
  80
  81MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
  82
  83/**
  84 * spider_net_read_reg - reads an SMMIO register of a card
  85 * @card: device structure
  86 * @reg: register to read from
  87 *
  88 * returns the content of the specified SMMIO register.
  89 */
  90static inline u32
  91spider_net_read_reg(struct spider_net_card *card, u32 reg)
  92{
  93        /* We use the powerpc specific variants instead of readl_be() because
  94         * we know spidernet is not a real PCI device and we can thus avoid the
  95         * performance hit caused by the PCI workarounds.
  96         */
  97        return in_be32(card->regs + reg);
  98}
  99
 100/**
 101 * spider_net_write_reg - writes to an SMMIO register of a card
 102 * @card: device structure
 103 * @reg: register to write to
 104 * @value: value to write into the specified SMMIO register
 105 */
 106static inline void
 107spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
 108{
 109        /* We use the powerpc specific variants instead of writel_be() because
 110         * we know spidernet is not a real PCI device and we can thus avoid the
 111         * performance hit caused by the PCI workarounds.
 112         */
 113        out_be32(card->regs + reg, value);
 114}
 115
 116/**
 117 * spider_net_write_phy - write to phy register
 118 * @netdev: adapter to be written to
 119 * @mii_id: id of MII
 120 * @reg: PHY register
 121 * @val: value to be written to phy register
 122 *
 123 * spider_net_write_phy_register writes to an arbitrary PHY
 124 * register via the spider GPCWOPCMD register. We assume the queue does
 125 * not run full (not more than 15 commands outstanding).
 126 **/
 127static void
 128spider_net_write_phy(struct net_device *netdev, int mii_id,
 129                     int reg, int val)
 130{
 131        struct spider_net_card *card = netdev_priv(netdev);
 132        u32 writevalue;
 133
 134        writevalue = ((u32)mii_id << 21) |
 135                ((u32)reg << 16) | ((u32)val);
 136
 137        spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
 138}
 139
 140/**
 141 * spider_net_read_phy - read from phy register
 142 * @netdev: network device to be read from
 143 * @mii_id: id of MII
 144 * @reg: PHY register
 145 *
 146 * Returns value read from PHY register
 147 *
 148 * spider_net_write_phy reads from an arbitrary PHY
 149 * register via the spider GPCROPCMD register
 150 **/
 151static int
 152spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
 153{
 154        struct spider_net_card *card = netdev_priv(netdev);
 155        u32 readvalue;
 156
 157        readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
 158        spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
 159
 160        /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
 161         * interrupt, as we poll for the completion of the read operation
 162         * in spider_net_read_phy. Should take about 50 us */
 163        do {
 164                readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
 165        } while (readvalue & SPIDER_NET_GPREXEC);
 166
 167        readvalue &= SPIDER_NET_GPRDAT_MASK;
 168
 169        return readvalue;
 170}
 171
 172/**
 173 * spider_net_setup_aneg - initial auto-negotiation setup
 174 * @card: device structure
 175 **/
 176static void
 177spider_net_setup_aneg(struct spider_net_card *card)
 178{
 179        struct mii_phy *phy = &card->phy;
 180        u32 advertise = 0;
 181        u16 bmsr, estat;
 182
 183        bmsr  = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
 184        estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
 185
 186        if (bmsr & BMSR_10HALF)
 187                advertise |= ADVERTISED_10baseT_Half;
 188        if (bmsr & BMSR_10FULL)
 189                advertise |= ADVERTISED_10baseT_Full;
 190        if (bmsr & BMSR_100HALF)
 191                advertise |= ADVERTISED_100baseT_Half;
 192        if (bmsr & BMSR_100FULL)
 193                advertise |= ADVERTISED_100baseT_Full;
 194
 195        if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL))
 196                advertise |= SUPPORTED_1000baseT_Full;
 197        if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
 198                advertise |= SUPPORTED_1000baseT_Half;
 199
 200        sungem_phy_probe(phy, phy->mii_id);
 201        phy->def->ops->setup_aneg(phy, advertise);
 202
 203}
 204
 205/**
 206 * spider_net_rx_irq_off - switch off rx irq on this spider card
 207 * @card: device structure
 208 *
 209 * switches off rx irq by masking them out in the GHIINTnMSK register
 210 */
 211static void
 212spider_net_rx_irq_off(struct spider_net_card *card)
 213{
 214        u32 regvalue;
 215
 216        regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
 217        spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
 218}
 219
 220/**
 221 * spider_net_rx_irq_on - switch on rx irq on this spider card
 222 * @card: device structure
 223 *
 224 * switches on rx irq by enabling them in the GHIINTnMSK register
 225 */
 226static void
 227spider_net_rx_irq_on(struct spider_net_card *card)
 228{
 229        u32 regvalue;
 230
 231        regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
 232        spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
 233}
 234
 235/**
 236 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
 237 * @card: card structure
 238 *
 239 * spider_net_set_promisc sets the unicast destination address filter and
 240 * thus either allows for non-promisc mode or promisc mode
 241 */
 242static void
 243spider_net_set_promisc(struct spider_net_card *card)
 244{
 245        u32 macu, macl;
 246        struct net_device *netdev = card->netdev;
 247
 248        if (netdev->flags & IFF_PROMISC) {
 249                /* clear destination entry 0 */
 250                spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
 251                spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
 252                spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
 253                                     SPIDER_NET_PROMISC_VALUE);
 254        } else {
 255                macu = netdev->dev_addr[0];
 256                macu <<= 8;
 257                macu |= netdev->dev_addr[1];
 258                memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
 259
 260                macu |= SPIDER_NET_UA_DESCR_VALUE;
 261                spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
 262                spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
 263                spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
 264                                     SPIDER_NET_NONPROMISC_VALUE);
 265        }
 266}
 267
 268/**
 269 * spider_net_get_descr_status -- returns the status of a descriptor
 270 * @descr: descriptor to look at
 271 *
 272 * returns the status as in the dmac_cmd_status field of the descriptor
 273 */
 274static inline int
 275spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr)
 276{
 277        return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
 278}
 279
 280/**
 281 * spider_net_free_chain - free descriptor chain
 282 * @card: card structure
 283 * @chain: address of chain
 284 *
 285 */
 286static void
 287spider_net_free_chain(struct spider_net_card *card,
 288                      struct spider_net_descr_chain *chain)
 289{
 290        struct spider_net_descr *descr;
 291
 292        descr = chain->ring;
 293        do {
 294                descr->bus_addr = 0;
 295                descr->hwdescr->next_descr_addr = 0;
 296                descr = descr->next;
 297        } while (descr != chain->ring);
 298
 299        dma_free_coherent(&card->pdev->dev, chain->num_desc,
 300            chain->hwring, chain->dma_addr);
 301}
 302
 303/**
 304 * spider_net_init_chain - alloc and link descriptor chain
 305 * @card: card structure
 306 * @chain: address of chain
 307 *
 308 * We manage a circular list that mirrors the hardware structure,
 309 * except that the hardware uses bus addresses.
 310 *
 311 * Returns 0 on success, <0 on failure
 312 */
 313static int
 314spider_net_init_chain(struct spider_net_card *card,
 315                       struct spider_net_descr_chain *chain)
 316{
 317        int i;
 318        struct spider_net_descr *descr;
 319        struct spider_net_hw_descr *hwdescr;
 320        dma_addr_t buf;
 321        size_t alloc_size;
 322
 323        alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr);
 324
 325        chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
 326                                           &chain->dma_addr, GFP_KERNEL);
 327        if (!chain->hwring)
 328                return -ENOMEM;
 329
 330        memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr));
 331
 332        /* Set up the hardware pointers in each descriptor */
 333        descr = chain->ring;
 334        hwdescr = chain->hwring;
 335        buf = chain->dma_addr;
 336        for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) {
 337                hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
 338                hwdescr->next_descr_addr = 0;
 339
 340                descr->hwdescr = hwdescr;
 341                descr->bus_addr = buf;
 342                descr->next = descr + 1;
 343                descr->prev = descr - 1;
 344
 345                buf += sizeof(struct spider_net_hw_descr);
 346        }
 347        /* do actual circular list */
 348        (descr-1)->next = chain->ring;
 349        chain->ring->prev = descr-1;
 350
 351        spin_lock_init(&chain->lock);
 352        chain->head = chain->ring;
 353        chain->tail = chain->ring;
 354        return 0;
 355}
 356
 357/**
 358 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
 359 * @card: card structure
 360 *
 361 * returns 0 on success, <0 on failure
 362 */
 363static void
 364spider_net_free_rx_chain_contents(struct spider_net_card *card)
 365{
 366        struct spider_net_descr *descr;
 367
 368        descr = card->rx_chain.head;
 369        do {
 370                if (descr->skb) {
 371                        pci_unmap_single(card->pdev, descr->hwdescr->buf_addr,
 372                                         SPIDER_NET_MAX_FRAME,
 373                                         PCI_DMA_BIDIRECTIONAL);
 374                        dev_kfree_skb(descr->skb);
 375                        descr->skb = NULL;
 376                }
 377                descr = descr->next;
 378        } while (descr != card->rx_chain.head);
 379}
 380
 381/**
 382 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
 383 * @card: card structure
 384 * @descr: descriptor to re-init
 385 *
 386 * Return 0 on success, <0 on failure.
 387 *
 388 * Allocates a new rx skb, iommu-maps it and attaches it to the
 389 * descriptor. Mark the descriptor as activated, ready-to-use.
 390 */
 391static int
 392spider_net_prepare_rx_descr(struct spider_net_card *card,
 393                            struct spider_net_descr *descr)
 394{
 395        struct spider_net_hw_descr *hwdescr = descr->hwdescr;
 396        dma_addr_t buf;
 397        int offset;
 398        int bufsize;
 399
 400        /* we need to round up the buffer size to a multiple of 128 */
 401        bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
 402                (~(SPIDER_NET_RXBUF_ALIGN - 1));
 403
 404        /* and we need to have it 128 byte aligned, therefore we allocate a
 405         * bit more */
 406        /* allocate an skb */
 407        descr->skb = netdev_alloc_skb(card->netdev,
 408                                      bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
 409        if (!descr->skb) {
 410                if (netif_msg_rx_err(card) && net_ratelimit())
 411                        dev_err(&card->netdev->dev,
 412                                "Not enough memory to allocate rx buffer\n");
 413                card->spider_stats.alloc_rx_skb_error++;
 414                return -ENOMEM;
 415        }
 416        hwdescr->buf_size = bufsize;
 417        hwdescr->result_size = 0;
 418        hwdescr->valid_size = 0;
 419        hwdescr->data_status = 0;
 420        hwdescr->data_error = 0;
 421
 422        offset = ((unsigned long)descr->skb->data) &
 423                (SPIDER_NET_RXBUF_ALIGN - 1);
 424        if (offset)
 425                skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
 426        /* iommu-map the skb */
 427        buf = pci_map_single(card->pdev, descr->skb->data,
 428                        SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
 429        if (pci_dma_mapping_error(card->pdev, buf)) {
 430                dev_kfree_skb_any(descr->skb);
 431                descr->skb = NULL;
 432                if (netif_msg_rx_err(card) && net_ratelimit())
 433                        dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n");
 434                card->spider_stats.rx_iommu_map_error++;
 435                hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
 436        } else {
 437                hwdescr->buf_addr = buf;
 438                wmb();
 439                hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
 440                                         SPIDER_NET_DMAC_NOINTR_COMPLETE;
 441        }
 442
 443        return 0;
 444}
 445
 446/**
 447 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
 448 * @card: card structure
 449 *
 450 * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
 451 * chip by writing to the appropriate register. DMA is enabled in
 452 * spider_net_enable_rxdmac.
 453 */
 454static inline void
 455spider_net_enable_rxchtails(struct spider_net_card *card)
 456{
 457        /* assume chain is aligned correctly */
 458        spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
 459                             card->rx_chain.tail->bus_addr);
 460}
 461
 462/**
 463 * spider_net_enable_rxdmac - enables a receive DMA controller
 464 * @card: card structure
 465 *
 466 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
 467 * in the GDADMACCNTR register
 468 */
 469static inline void
 470spider_net_enable_rxdmac(struct spider_net_card *card)
 471{
 472        wmb();
 473        spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
 474                             SPIDER_NET_DMA_RX_VALUE);
 475}
 476
 477/**
 478 * spider_net_disable_rxdmac - disables the receive DMA controller
 479 * @card: card structure
 480 *
 481 * spider_net_disable_rxdmac terminates processing on the DMA controller
 482 * by turing off the DMA controller, with the force-end flag set.
 483 */
 484static inline void
 485spider_net_disable_rxdmac(struct spider_net_card *card)
 486{
 487        spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
 488                             SPIDER_NET_DMA_RX_FEND_VALUE);
 489}
 490
 491/**
 492 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
 493 * @card: card structure
 494 *
 495 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
 496 */
 497static void
 498spider_net_refill_rx_chain(struct spider_net_card *card)
 499{
 500        struct spider_net_descr_chain *chain = &card->rx_chain;
 501        unsigned long flags;
 502
 503        /* one context doing the refill (and a second context seeing that
 504         * and omitting it) is ok. If called by NAPI, we'll be called again
 505         * as spider_net_decode_one_descr is called several times. If some
 506         * interrupt calls us, the NAPI is about to clean up anyway. */
 507        if (!spin_trylock_irqsave(&chain->lock, flags))
 508                return;
 509
 510        while (spider_net_get_descr_status(chain->head->hwdescr) ==
 511                        SPIDER_NET_DESCR_NOT_IN_USE) {
 512                if (spider_net_prepare_rx_descr(card, chain->head))
 513                        break;
 514                chain->head = chain->head->next;
 515        }
 516
 517        spin_unlock_irqrestore(&chain->lock, flags);
 518}
 519
 520/**
 521 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
 522 * @card: card structure
 523 *
 524 * Returns 0 on success, <0 on failure.
 525 */
 526static int
 527spider_net_alloc_rx_skbs(struct spider_net_card *card)
 528{
 529        struct spider_net_descr_chain *chain = &card->rx_chain;
 530        struct spider_net_descr *start = chain->tail;
 531        struct spider_net_descr *descr = start;
 532
 533        /* Link up the hardware chain pointers */
 534        do {
 535                descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
 536                descr = descr->next;
 537        } while (descr != start);
 538
 539        /* Put at least one buffer into the chain. if this fails,
 540         * we've got a problem. If not, spider_net_refill_rx_chain
 541         * will do the rest at the end of this function. */
 542        if (spider_net_prepare_rx_descr(card, chain->head))
 543                goto error;
 544        else
 545                chain->head = chain->head->next;
 546
 547        /* This will allocate the rest of the rx buffers;
 548         * if not, it's business as usual later on. */
 549        spider_net_refill_rx_chain(card);
 550        spider_net_enable_rxdmac(card);
 551        return 0;
 552
 553error:
 554        spider_net_free_rx_chain_contents(card);
 555        return -ENOMEM;
 556}
 557
 558/**
 559 * spider_net_get_multicast_hash - generates hash for multicast filter table
 560 * @addr: multicast address
 561 *
 562 * returns the hash value.
 563 *
 564 * spider_net_get_multicast_hash calculates a hash value for a given multicast
 565 * address, that is used to set the multicast filter tables
 566 */
 567static u8
 568spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
 569{
 570        u32 crc;
 571        u8 hash;
 572        char addr_for_crc[ETH_ALEN] = { 0, };
 573        int i, bit;
 574
 575        for (i = 0; i < ETH_ALEN * 8; i++) {
 576                bit = (addr[i / 8] >> (i % 8)) & 1;
 577                addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
 578        }
 579
 580        crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
 581
 582        hash = (crc >> 27);
 583        hash <<= 3;
 584        hash |= crc & 7;
 585        hash &= 0xff;
 586
 587        return hash;
 588}
 589
 590/**
 591 * spider_net_set_multi - sets multicast addresses and promisc flags
 592 * @netdev: interface device structure
 593 *
 594 * spider_net_set_multi configures multicast addresses as needed for the
 595 * netdev interface. It also sets up multicast, allmulti and promisc
 596 * flags appropriately
 597 */
 598static void
 599spider_net_set_multi(struct net_device *netdev)
 600{
 601        struct netdev_hw_addr *ha;
 602        u8 hash;
 603        int i;
 604        u32 reg;
 605        struct spider_net_card *card = netdev_priv(netdev);
 606        DECLARE_BITMAP(bitmask, SPIDER_NET_MULTICAST_HASHES) = {};
 607
 608        spider_net_set_promisc(card);
 609
 610        if (netdev->flags & IFF_ALLMULTI) {
 611                for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
 612                        set_bit(i, bitmask);
 613                }
 614                goto write_hash;
 615        }
 616
 617        /* well, we know, what the broadcast hash value is: it's xfd
 618        hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
 619        set_bit(0xfd, bitmask);
 620
 621        netdev_for_each_mc_addr(ha, netdev) {
 622                hash = spider_net_get_multicast_hash(netdev, ha->addr);
 623                set_bit(hash, bitmask);
 624        }
 625
 626write_hash:
 627        for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
 628                reg = 0;
 629                if (test_bit(i * 4, bitmask))
 630                        reg += 0x08;
 631                reg <<= 8;
 632                if (test_bit(i * 4 + 1, bitmask))
 633                        reg += 0x08;
 634                reg <<= 8;
 635                if (test_bit(i * 4 + 2, bitmask))
 636                        reg += 0x08;
 637                reg <<= 8;
 638                if (test_bit(i * 4 + 3, bitmask))
 639                        reg += 0x08;
 640
 641                spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
 642        }
 643}
 644
 645/**
 646 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
 647 * @card: card structure
 648 * @skb: packet to use
 649 *
 650 * returns 0 on success, <0 on failure.
 651 *
 652 * fills out the descriptor structure with skb data and len. Copies data,
 653 * if needed (32bit DMA!)
 654 */
 655static int
 656spider_net_prepare_tx_descr(struct spider_net_card *card,
 657                            struct sk_buff *skb)
 658{
 659        struct spider_net_descr_chain *chain = &card->tx_chain;
 660        struct spider_net_descr *descr;
 661        struct spider_net_hw_descr *hwdescr;
 662        dma_addr_t buf;
 663        unsigned long flags;
 664
 665        buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
 666        if (pci_dma_mapping_error(card->pdev, buf)) {
 667                if (netif_msg_tx_err(card) && net_ratelimit())
 668                        dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
 669                                  "Dropping packet\n", skb->data, skb->len);
 670                card->spider_stats.tx_iommu_map_error++;
 671                return -ENOMEM;
 672        }
 673
 674        spin_lock_irqsave(&chain->lock, flags);
 675        descr = card->tx_chain.head;
 676        if (descr->next == chain->tail->prev) {
 677                spin_unlock_irqrestore(&chain->lock, flags);
 678                pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE);
 679                return -ENOMEM;
 680        }
 681        hwdescr = descr->hwdescr;
 682        chain->head = descr->next;
 683
 684        descr->skb = skb;
 685        hwdescr->buf_addr = buf;
 686        hwdescr->buf_size = skb->len;
 687        hwdescr->next_descr_addr = 0;
 688        hwdescr->data_status = 0;
 689
 690        hwdescr->dmac_cmd_status =
 691                        SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL;
 692        spin_unlock_irqrestore(&chain->lock, flags);
 693
 694        if (skb->ip_summed == CHECKSUM_PARTIAL)
 695                switch (ip_hdr(skb)->protocol) {
 696                case IPPROTO_TCP:
 697                        hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
 698                        break;
 699                case IPPROTO_UDP:
 700                        hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
 701                        break;
 702                }
 703
 704        /* Chain the bus address, so that the DMA engine finds this descr. */
 705        wmb();
 706        descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
 707
 708        netif_trans_update(card->netdev); /* set netdev watchdog timer */
 709        return 0;
 710}
 711
 712static int
 713spider_net_set_low_watermark(struct spider_net_card *card)
 714{
 715        struct spider_net_descr *descr = card->tx_chain.tail;
 716        struct spider_net_hw_descr *hwdescr;
 717        unsigned long flags;
 718        int status;
 719        int cnt=0;
 720        int i;
 721
 722        /* Measure the length of the queue. Measurement does not
 723         * need to be precise -- does not need a lock. */
 724        while (descr != card->tx_chain.head) {
 725                status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
 726                if (status == SPIDER_NET_DESCR_NOT_IN_USE)
 727                        break;
 728                descr = descr->next;
 729                cnt++;
 730        }
 731
 732        /* If TX queue is short, don't even bother with interrupts */
 733        if (cnt < card->tx_chain.num_desc/4)
 734                return cnt;
 735
 736        /* Set low-watermark 3/4th's of the way into the queue. */
 737        descr = card->tx_chain.tail;
 738        cnt = (cnt*3)/4;
 739        for (i=0;i<cnt; i++)
 740                descr = descr->next;
 741
 742        /* Set the new watermark, clear the old watermark */
 743        spin_lock_irqsave(&card->tx_chain.lock, flags);
 744        descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
 745        if (card->low_watermark && card->low_watermark != descr) {
 746                hwdescr = card->low_watermark->hwdescr;
 747                hwdescr->dmac_cmd_status =
 748                     hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
 749        }
 750        card->low_watermark = descr;
 751        spin_unlock_irqrestore(&card->tx_chain.lock, flags);
 752        return cnt;
 753}
 754
 755/**
 756 * spider_net_release_tx_chain - processes sent tx descriptors
 757 * @card: adapter structure
 758 * @brutal: if set, don't care about whether descriptor seems to be in use
 759 *
 760 * returns 0 if the tx ring is empty, otherwise 1.
 761 *
 762 * spider_net_release_tx_chain releases the tx descriptors that spider has
 763 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
 764 * If some other context is calling this function, we return 1 so that we're
 765 * scheduled again (if we were scheduled) and will not lose initiative.
 766 */
 767static int
 768spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
 769{
 770        struct net_device *dev = card->netdev;
 771        struct spider_net_descr_chain *chain = &card->tx_chain;
 772        struct spider_net_descr *descr;
 773        struct spider_net_hw_descr *hwdescr;
 774        struct sk_buff *skb;
 775        u32 buf_addr;
 776        unsigned long flags;
 777        int status;
 778
 779        while (1) {
 780                spin_lock_irqsave(&chain->lock, flags);
 781                if (chain->tail == chain->head) {
 782                        spin_unlock_irqrestore(&chain->lock, flags);
 783                        return 0;
 784                }
 785                descr = chain->tail;
 786                hwdescr = descr->hwdescr;
 787
 788                status = spider_net_get_descr_status(hwdescr);
 789                switch (status) {
 790                case SPIDER_NET_DESCR_COMPLETE:
 791                        dev->stats.tx_packets++;
 792                        dev->stats.tx_bytes += descr->skb->len;
 793                        break;
 794
 795                case SPIDER_NET_DESCR_CARDOWNED:
 796                        if (!brutal) {
 797                                spin_unlock_irqrestore(&chain->lock, flags);
 798                                return 1;
 799                        }
 800
 801                        /* fallthrough, if we release the descriptors
 802                         * brutally (then we don't care about
 803                         * SPIDER_NET_DESCR_CARDOWNED) */
 804
 805                case SPIDER_NET_DESCR_RESPONSE_ERROR:
 806                case SPIDER_NET_DESCR_PROTECTION_ERROR:
 807                case SPIDER_NET_DESCR_FORCE_END:
 808                        if (netif_msg_tx_err(card))
 809                                dev_err(&card->netdev->dev, "forcing end of tx descriptor "
 810                                       "with status x%02x\n", status);
 811                        dev->stats.tx_errors++;
 812                        break;
 813
 814                default:
 815                        dev->stats.tx_dropped++;
 816                        if (!brutal) {
 817                                spin_unlock_irqrestore(&chain->lock, flags);
 818                                return 1;
 819                        }
 820                }
 821
 822                chain->tail = descr->next;
 823                hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
 824                skb = descr->skb;
 825                descr->skb = NULL;
 826                buf_addr = hwdescr->buf_addr;
 827                spin_unlock_irqrestore(&chain->lock, flags);
 828
 829                /* unmap the skb */
 830                if (skb) {
 831                        pci_unmap_single(card->pdev, buf_addr, skb->len,
 832                                        PCI_DMA_TODEVICE);
 833                        dev_consume_skb_any(skb);
 834                }
 835        }
 836        return 0;
 837}
 838
 839/**
 840 * spider_net_kick_tx_dma - enables TX DMA processing
 841 * @card: card structure
 842 *
 843 * This routine will start the transmit DMA running if
 844 * it is not already running. This routine ned only be
 845 * called when queueing a new packet to an empty tx queue.
 846 * Writes the current tx chain head as start address
 847 * of the tx descriptor chain and enables the transmission
 848 * DMA engine.
 849 */
 850static inline void
 851spider_net_kick_tx_dma(struct spider_net_card *card)
 852{
 853        struct spider_net_descr *descr;
 854
 855        if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
 856                        SPIDER_NET_TX_DMA_EN)
 857                goto out;
 858
 859        descr = card->tx_chain.tail;
 860        for (;;) {
 861                if (spider_net_get_descr_status(descr->hwdescr) ==
 862                                SPIDER_NET_DESCR_CARDOWNED) {
 863                        spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
 864                                        descr->bus_addr);
 865                        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
 866                                        SPIDER_NET_DMA_TX_VALUE);
 867                        break;
 868                }
 869                if (descr == card->tx_chain.head)
 870                        break;
 871                descr = descr->next;
 872        }
 873
 874out:
 875        mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
 876}
 877
 878/**
 879 * spider_net_xmit - transmits a frame over the device
 880 * @skb: packet to send out
 881 * @netdev: interface device structure
 882 *
 883 * returns 0 on success, !0 on failure
 884 */
 885static int
 886spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 887{
 888        int cnt;
 889        struct spider_net_card *card = netdev_priv(netdev);
 890
 891        spider_net_release_tx_chain(card, 0);
 892
 893        if (spider_net_prepare_tx_descr(card, skb) != 0) {
 894                netdev->stats.tx_dropped++;
 895                netif_stop_queue(netdev);
 896                return NETDEV_TX_BUSY;
 897        }
 898
 899        cnt = spider_net_set_low_watermark(card);
 900        if (cnt < 5)
 901                spider_net_kick_tx_dma(card);
 902        return NETDEV_TX_OK;
 903}
 904
 905/**
 906 * spider_net_cleanup_tx_ring - cleans up the TX ring
 907 * @card: card structure
 908 *
 909 * spider_net_cleanup_tx_ring is called by either the tx_timer
 910 * or from the NAPI polling routine.
 911 * This routine releases resources associted with transmitted
 912 * packets, including updating the queue tail pointer.
 913 */
 914static void
 915spider_net_cleanup_tx_ring(struct spider_net_card *card)
 916{
 917        if ((spider_net_release_tx_chain(card, 0) != 0) &&
 918            (card->netdev->flags & IFF_UP)) {
 919                spider_net_kick_tx_dma(card);
 920                netif_wake_queue(card->netdev);
 921        }
 922}
 923
 924/**
 925 * spider_net_do_ioctl - called for device ioctls
 926 * @netdev: interface device structure
 927 * @ifr: request parameter structure for ioctl
 928 * @cmd: command code for ioctl
 929 *
 930 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
 931 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
 932 */
 933static int
 934spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 935{
 936        switch (cmd) {
 937        default:
 938                return -EOPNOTSUPP;
 939        }
 940}
 941
 942/**
 943 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
 944 * @descr: descriptor to process
 945 * @card: card structure
 946 *
 947 * Fills out skb structure and passes the data to the stack.
 948 * The descriptor state is not changed.
 949 */
 950static void
 951spider_net_pass_skb_up(struct spider_net_descr *descr,
 952                       struct spider_net_card *card)
 953{
 954        struct spider_net_hw_descr *hwdescr = descr->hwdescr;
 955        struct sk_buff *skb = descr->skb;
 956        struct net_device *netdev = card->netdev;
 957        u32 data_status = hwdescr->data_status;
 958        u32 data_error = hwdescr->data_error;
 959
 960        skb_put(skb, hwdescr->valid_size);
 961
 962        /* the card seems to add 2 bytes of junk in front
 963         * of the ethernet frame */
 964#define SPIDER_MISALIGN         2
 965        skb_pull(skb, SPIDER_MISALIGN);
 966        skb->protocol = eth_type_trans(skb, netdev);
 967
 968        /* checksum offload */
 969        skb_checksum_none_assert(skb);
 970        if (netdev->features & NETIF_F_RXCSUM) {
 971                if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
 972                       SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
 973                     !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
 974                        skb->ip_summed = CHECKSUM_UNNECESSARY;
 975        }
 976
 977        if (data_status & SPIDER_NET_VLAN_PACKET) {
 978                /* further enhancements: HW-accel VLAN */
 979        }
 980
 981        /* update netdevice statistics */
 982        netdev->stats.rx_packets++;
 983        netdev->stats.rx_bytes += skb->len;
 984
 985        /* pass skb up to stack */
 986        netif_receive_skb(skb);
 987}
 988
 989static void show_rx_chain(struct spider_net_card *card)
 990{
 991        struct spider_net_descr_chain *chain = &card->rx_chain;
 992        struct spider_net_descr *start= chain->tail;
 993        struct spider_net_descr *descr= start;
 994        struct spider_net_hw_descr *hwd = start->hwdescr;
 995        struct device *dev = &card->netdev->dev;
 996        u32 curr_desc, next_desc;
 997        int status;
 998
 999        int tot = 0;
1000        int cnt = 0;
1001        int off = start - chain->ring;
1002        int cstat = hwd->dmac_cmd_status;
1003
1004        dev_info(dev, "Total number of descrs=%d\n",
1005                chain->num_desc);
1006        dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n",
1007                off, cstat);
1008
1009        curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA);
1010        next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA);
1011
1012        status = cstat;
1013        do
1014        {
1015                hwd = descr->hwdescr;
1016                off = descr - chain->ring;
1017                status = hwd->dmac_cmd_status;
1018
1019                if (descr == chain->head)
1020                        dev_info(dev, "Chain head is at %d, head status=0x%x\n",
1021                                 off, status);
1022
1023                if (curr_desc == descr->bus_addr)
1024                        dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1025                                 off, status);
1026
1027                if (next_desc == descr->bus_addr)
1028                        dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1029                                 off, status);
1030
1031                if (hwd->next_descr_addr == 0)
1032                        dev_info(dev, "chain is cut at %d\n", off);
1033
1034                if (cstat != status) {
1035                        int from = (chain->num_desc + off - cnt) % chain->num_desc;
1036                        int to = (chain->num_desc + off - 1) % chain->num_desc;
1037                        dev_info(dev, "Have %d (from %d to %d) descrs "
1038                                 "with stat=0x%08x\n", cnt, from, to, cstat);
1039                        cstat = status;
1040                        cnt = 0;
1041                }
1042
1043                cnt ++;
1044                tot ++;
1045                descr = descr->next;
1046        } while (descr != start);
1047
1048        dev_info(dev, "Last %d descrs with stat=0x%08x "
1049                 "for a total of %d descrs\n", cnt, cstat, tot);
1050
1051#ifdef DEBUG
1052        /* Now dump the whole ring */
1053        descr = start;
1054        do
1055        {
1056                struct spider_net_hw_descr *hwd = descr->hwdescr;
1057                status = spider_net_get_descr_status(hwd);
1058                cnt = descr - chain->ring;
1059                dev_info(dev, "Descr %d stat=0x%08x skb=%p\n",
1060                         cnt, status, descr->skb);
1061                dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n",
1062                         descr->bus_addr, hwd->buf_addr, hwd->buf_size);
1063                dev_info(dev, "next=%08x result sz=%d valid sz=%d\n",
1064                         hwd->next_descr_addr, hwd->result_size,
1065                         hwd->valid_size);
1066                dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n",
1067                         hwd->dmac_cmd_status, hwd->data_status,
1068                         hwd->data_error);
1069                dev_info(dev, "\n");
1070
1071                descr = descr->next;
1072        } while (descr != start);
1073#endif
1074
1075}
1076
1077/**
1078 * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1079 *
1080 * If the driver fails to keep up and empty the queue, then the
1081 * hardware wil run out of room to put incoming packets. This
1082 * will cause the hardware to skip descrs that are full (instead
1083 * of halting/retrying). Thus, once the driver runs, it wil need
1084 * to "catch up" to where the hardware chain pointer is at.
1085 */
1086static void spider_net_resync_head_ptr(struct spider_net_card *card)
1087{
1088        unsigned long flags;
1089        struct spider_net_descr_chain *chain = &card->rx_chain;
1090        struct spider_net_descr *descr;
1091        int i, status;
1092
1093        /* Advance head pointer past any empty descrs */
1094        descr = chain->head;
1095        status = spider_net_get_descr_status(descr->hwdescr);
1096
1097        if (status == SPIDER_NET_DESCR_NOT_IN_USE)
1098                return;
1099
1100        spin_lock_irqsave(&chain->lock, flags);
1101
1102        descr = chain->head;
1103        status = spider_net_get_descr_status(descr->hwdescr);
1104        for (i=0; i<chain->num_desc; i++) {
1105                if (status != SPIDER_NET_DESCR_CARDOWNED) break;
1106                descr = descr->next;
1107                status = spider_net_get_descr_status(descr->hwdescr);
1108        }
1109        chain->head = descr;
1110
1111        spin_unlock_irqrestore(&chain->lock, flags);
1112}
1113
1114static int spider_net_resync_tail_ptr(struct spider_net_card *card)
1115{
1116        struct spider_net_descr_chain *chain = &card->rx_chain;
1117        struct spider_net_descr *descr;
1118        int i, status;
1119
1120        /* Advance tail pointer past any empty and reaped descrs */
1121        descr = chain->tail;
1122        status = spider_net_get_descr_status(descr->hwdescr);
1123
1124        for (i=0; i<chain->num_desc; i++) {
1125                if ((status != SPIDER_NET_DESCR_CARDOWNED) &&
1126                    (status != SPIDER_NET_DESCR_NOT_IN_USE)) break;
1127                descr = descr->next;
1128                status = spider_net_get_descr_status(descr->hwdescr);
1129        }
1130        chain->tail = descr;
1131
1132        if ((i == chain->num_desc) || (i == 0))
1133                return 1;
1134        return 0;
1135}
1136
1137/**
1138 * spider_net_decode_one_descr - processes an RX descriptor
1139 * @card: card structure
1140 *
1141 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1142 *
1143 * Processes an RX descriptor by iommu-unmapping the data buffer
1144 * and passing the packet up to the stack. This function is called
1145 * in softirq context, e.g. either bottom half from interrupt or
1146 * NAPI polling context.
1147 */
1148static int
1149spider_net_decode_one_descr(struct spider_net_card *card)
1150{
1151        struct net_device *dev = card->netdev;
1152        struct spider_net_descr_chain *chain = &card->rx_chain;
1153        struct spider_net_descr *descr = chain->tail;
1154        struct spider_net_hw_descr *hwdescr = descr->hwdescr;
1155        u32 hw_buf_addr;
1156        int status;
1157
1158        status = spider_net_get_descr_status(hwdescr);
1159
1160        /* Nothing in the descriptor, or ring must be empty */
1161        if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
1162            (status == SPIDER_NET_DESCR_NOT_IN_USE))
1163                return 0;
1164
1165        /* descriptor definitively used -- move on tail */
1166        chain->tail = descr->next;
1167
1168        /* unmap descriptor */
1169        hw_buf_addr = hwdescr->buf_addr;
1170        hwdescr->buf_addr = 0xffffffff;
1171        pci_unmap_single(card->pdev, hw_buf_addr,
1172                        SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
1173
1174        if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
1175             (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
1176             (status == SPIDER_NET_DESCR_FORCE_END) ) {
1177                if (netif_msg_rx_err(card))
1178                        dev_err(&dev->dev,
1179                               "dropping RX descriptor with state %d\n", status);
1180                dev->stats.rx_dropped++;
1181                goto bad_desc;
1182        }
1183
1184        if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
1185             (status != SPIDER_NET_DESCR_FRAME_END) ) {
1186                if (netif_msg_rx_err(card))
1187                        dev_err(&card->netdev->dev,
1188                               "RX descriptor with unknown state %d\n", status);
1189                card->spider_stats.rx_desc_unk_state++;
1190                goto bad_desc;
1191        }
1192
1193        /* The cases we'll throw away the packet immediately */
1194        if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
1195                if (netif_msg_rx_err(card))
1196                        dev_err(&card->netdev->dev,
1197                               "error in received descriptor found, "
1198                               "data_status=x%08x, data_error=x%08x\n",
1199                               hwdescr->data_status, hwdescr->data_error);
1200                goto bad_desc;
1201        }
1202
1203        if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
1204                dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
1205                               hwdescr->dmac_cmd_status);
1206                pr_err("buf_addr=x%08x\n", hw_buf_addr);
1207                pr_err("buf_size=x%08x\n", hwdescr->buf_size);
1208                pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
1209                pr_err("result_size=x%08x\n", hwdescr->result_size);
1210                pr_err("valid_size=x%08x\n", hwdescr->valid_size);
1211                pr_err("data_status=x%08x\n", hwdescr->data_status);
1212                pr_err("data_error=x%08x\n", hwdescr->data_error);
1213                pr_err("which=%ld\n", descr - card->rx_chain.ring);
1214
1215                card->spider_stats.rx_desc_error++;
1216                goto bad_desc;
1217        }
1218
1219        /* Ok, we've got a packet in descr */
1220        spider_net_pass_skb_up(descr, card);
1221        descr->skb = NULL;
1222        hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1223        return 1;
1224
1225bad_desc:
1226        if (netif_msg_rx_err(card))
1227                show_rx_chain(card);
1228        dev_kfree_skb_irq(descr->skb);
1229        descr->skb = NULL;
1230        hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1231        return 0;
1232}
1233
1234/**
1235 * spider_net_poll - NAPI poll function called by the stack to return packets
1236 * @netdev: interface device structure
1237 * @budget: number of packets we can pass to the stack at most
1238 *
1239 * returns 0 if no more packets available to the driver/stack. Returns 1,
1240 * if the quota is exceeded, but the driver has still packets.
1241 *
1242 * spider_net_poll returns all packets from the rx descriptors to the stack
1243 * (using netif_receive_skb). If all/enough packets are up, the driver
1244 * reenables interrupts and returns 0. If not, 1 is returned.
1245 */
1246static int spider_net_poll(struct napi_struct *napi, int budget)
1247{
1248        struct spider_net_card *card = container_of(napi, struct spider_net_card, napi);
1249        int packets_done = 0;
1250
1251        while (packets_done < budget) {
1252                if (!spider_net_decode_one_descr(card))
1253                        break;
1254
1255                packets_done++;
1256        }
1257
1258        if ((packets_done == 0) && (card->num_rx_ints != 0)) {
1259                if (!spider_net_resync_tail_ptr(card))
1260                        packets_done = budget;
1261                spider_net_resync_head_ptr(card);
1262        }
1263        card->num_rx_ints = 0;
1264
1265        spider_net_refill_rx_chain(card);
1266        spider_net_enable_rxdmac(card);
1267
1268        spider_net_cleanup_tx_ring(card);
1269
1270        /* if all packets are in the stack, enable interrupts and return 0 */
1271        /* if not, return 1 */
1272        if (packets_done < budget) {
1273                napi_complete_done(napi, packets_done);
1274                spider_net_rx_irq_on(card);
1275                card->ignore_rx_ramfull = 0;
1276        }
1277
1278        return packets_done;
1279}
1280
1281/**
1282 * spider_net_set_mac - sets the MAC of an interface
1283 * @netdev: interface device structure
1284 * @ptr: pointer to new MAC address
1285 *
1286 * Returns 0 on success, <0 on failure. Currently, we don't support this
1287 * and will always return EOPNOTSUPP.
1288 */
1289static int
1290spider_net_set_mac(struct net_device *netdev, void *p)
1291{
1292        struct spider_net_card *card = netdev_priv(netdev);
1293        u32 macl, macu, regvalue;
1294        struct sockaddr *addr = p;
1295
1296        if (!is_valid_ether_addr(addr->sa_data))
1297                return -EADDRNOTAVAIL;
1298
1299        memcpy(netdev->dev_addr, addr->sa_data, ETH_ALEN);
1300
1301        /* switch off GMACTPE and GMACRPE */
1302        regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1303        regvalue &= ~((1 << 5) | (1 << 6));
1304        spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1305
1306        /* write mac */
1307        macu = (netdev->dev_addr[0]<<24) + (netdev->dev_addr[1]<<16) +
1308                (netdev->dev_addr[2]<<8) + (netdev->dev_addr[3]);
1309        macl = (netdev->dev_addr[4]<<8) + (netdev->dev_addr[5]);
1310        spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
1311        spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
1312
1313        /* switch GMACTPE and GMACRPE back on */
1314        regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1315        regvalue |= ((1 << 5) | (1 << 6));
1316        spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1317
1318        spider_net_set_promisc(card);
1319
1320        return 0;
1321}
1322
1323/**
1324 * spider_net_link_reset
1325 * @netdev: net device structure
1326 *
1327 * This is called when the PHY_LINK signal is asserted. For the blade this is
1328 * not connected so we should never get here.
1329 *
1330 */
1331static void
1332spider_net_link_reset(struct net_device *netdev)
1333{
1334
1335        struct spider_net_card *card = netdev_priv(netdev);
1336
1337        del_timer_sync(&card->aneg_timer);
1338
1339        /* clear interrupt, block further interrupts */
1340        spider_net_write_reg(card, SPIDER_NET_GMACST,
1341                             spider_net_read_reg(card, SPIDER_NET_GMACST));
1342        spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1343
1344        /* reset phy and setup aneg */
1345        card->aneg_count = 0;
1346        card->medium = BCM54XX_COPPER;
1347        spider_net_setup_aneg(card);
1348        mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1349
1350}
1351
1352/**
1353 * spider_net_handle_error_irq - handles errors raised by an interrupt
1354 * @card: card structure
1355 * @status_reg: interrupt status register 0 (GHIINT0STS)
1356 *
1357 * spider_net_handle_error_irq treats or ignores all error conditions
1358 * found when an interrupt is presented
1359 */
1360static void
1361spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
1362                            u32 error_reg1, u32 error_reg2)
1363{
1364        u32 i;
1365        int show_error = 1;
1366
1367        /* check GHIINT0STS ************************************/
1368        if (status_reg)
1369                for (i = 0; i < 32; i++)
1370                        if (status_reg & (1<<i))
1371                                switch (i)
1372        {
1373        /* let error_reg1 and error_reg2 evaluation decide, what to do
1374        case SPIDER_NET_PHYINT:
1375        case SPIDER_NET_GMAC2INT:
1376        case SPIDER_NET_GMAC1INT:
1377        case SPIDER_NET_GFIFOINT:
1378        case SPIDER_NET_DMACINT:
1379        case SPIDER_NET_GSYSINT:
1380                break; */
1381
1382        case SPIDER_NET_GIPSINT:
1383                show_error = 0;
1384                break;
1385
1386        case SPIDER_NET_GPWOPCMPINT:
1387                /* PHY write operation completed */
1388                show_error = 0;
1389                break;
1390        case SPIDER_NET_GPROPCMPINT:
1391                /* PHY read operation completed */
1392                /* we don't use semaphores, as we poll for the completion
1393                 * of the read operation in spider_net_read_phy. Should take
1394                 * about 50 us */
1395                show_error = 0;
1396                break;
1397        case SPIDER_NET_GPWFFINT:
1398                /* PHY command queue full */
1399                if (netif_msg_intr(card))
1400                        dev_err(&card->netdev->dev, "PHY write queue full\n");
1401                show_error = 0;
1402                break;
1403
1404        /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1405        /* case SPIDER_NET_GRMARPINT: not used. print a message */
1406        /* case SPIDER_NET_GRMMPINT: not used. print a message */
1407
1408        case SPIDER_NET_GDTDEN0INT:
1409                /* someone has set TX_DMA_EN to 0 */
1410                show_error = 0;
1411                break;
1412
1413        case SPIDER_NET_GDDDEN0INT: /* fallthrough */
1414        case SPIDER_NET_GDCDEN0INT: /* fallthrough */
1415        case SPIDER_NET_GDBDEN0INT: /* fallthrough */
1416        case SPIDER_NET_GDADEN0INT:
1417                /* someone has set RX_DMA_EN to 0 */
1418                show_error = 0;
1419                break;
1420
1421        /* RX interrupts */
1422        case SPIDER_NET_GDDFDCINT:
1423        case SPIDER_NET_GDCFDCINT:
1424        case SPIDER_NET_GDBFDCINT:
1425        case SPIDER_NET_GDAFDCINT:
1426        /* case SPIDER_NET_GDNMINT: not used. print a message */
1427        /* case SPIDER_NET_GCNMINT: not used. print a message */
1428        /* case SPIDER_NET_GBNMINT: not used. print a message */
1429        /* case SPIDER_NET_GANMINT: not used. print a message */
1430        /* case SPIDER_NET_GRFNMINT: not used. print a message */
1431                show_error = 0;
1432                break;
1433
1434        /* TX interrupts */
1435        case SPIDER_NET_GDTFDCINT:
1436                show_error = 0;
1437                break;
1438        case SPIDER_NET_GTTEDINT:
1439                show_error = 0;
1440                break;
1441        case SPIDER_NET_GDTDCEINT:
1442                /* chain end. If a descriptor should be sent, kick off
1443                 * tx dma
1444                if (card->tx_chain.tail != card->tx_chain.head)
1445                        spider_net_kick_tx_dma(card);
1446                */
1447                show_error = 0;
1448                break;
1449
1450        /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1451        /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1452        }
1453
1454        /* check GHIINT1STS ************************************/
1455        if (error_reg1)
1456                for (i = 0; i < 32; i++)
1457                        if (error_reg1 & (1<<i))
1458                                switch (i)
1459        {
1460        case SPIDER_NET_GTMFLLINT:
1461                /* TX RAM full may happen on a usual case.
1462                 * Logging is not needed. */
1463                show_error = 0;
1464                break;
1465        case SPIDER_NET_GRFDFLLINT: /* fallthrough */
1466        case SPIDER_NET_GRFCFLLINT: /* fallthrough */
1467        case SPIDER_NET_GRFBFLLINT: /* fallthrough */
1468        case SPIDER_NET_GRFAFLLINT: /* fallthrough */
1469        case SPIDER_NET_GRMFLLINT:
1470                /* Could happen when rx chain is full */
1471                if (card->ignore_rx_ramfull == 0) {
1472                        card->ignore_rx_ramfull = 1;
1473                        spider_net_resync_head_ptr(card);
1474                        spider_net_refill_rx_chain(card);
1475                        spider_net_enable_rxdmac(card);
1476                        card->num_rx_ints ++;
1477                        napi_schedule(&card->napi);
1478                }
1479                show_error = 0;
1480                break;
1481
1482        /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1483        case SPIDER_NET_GDTINVDINT:
1484                /* allrighty. tx from previous descr ok */
1485                show_error = 0;
1486                break;
1487
1488        /* chain end */
1489        case SPIDER_NET_GDDDCEINT: /* fallthrough */
1490        case SPIDER_NET_GDCDCEINT: /* fallthrough */
1491        case SPIDER_NET_GDBDCEINT: /* fallthrough */
1492        case SPIDER_NET_GDADCEINT:
1493                spider_net_resync_head_ptr(card);
1494                spider_net_refill_rx_chain(card);
1495                spider_net_enable_rxdmac(card);
1496                card->num_rx_ints ++;
1497                napi_schedule(&card->napi);
1498                show_error = 0;
1499                break;
1500
1501        /* invalid descriptor */
1502        case SPIDER_NET_GDDINVDINT: /* fallthrough */
1503        case SPIDER_NET_GDCINVDINT: /* fallthrough */
1504        case SPIDER_NET_GDBINVDINT: /* fallthrough */
1505        case SPIDER_NET_GDAINVDINT:
1506                /* Could happen when rx chain is full */
1507                spider_net_resync_head_ptr(card);
1508                spider_net_refill_rx_chain(card);
1509                spider_net_enable_rxdmac(card);
1510                card->num_rx_ints ++;
1511                napi_schedule(&card->napi);
1512                show_error = 0;
1513                break;
1514
1515        /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1516        /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1517        /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1518        /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1519        /* case SPIDER_NET_GDARSERINT: problem, print a message */
1520        /* case SPIDER_NET_GDSERINT: problem, print a message */
1521        /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1522        /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1523        /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1524        /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1525        /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1526        default:
1527                show_error = 1;
1528                break;
1529        }
1530
1531        /* check GHIINT2STS ************************************/
1532        if (error_reg2)
1533                for (i = 0; i < 32; i++)
1534                        if (error_reg2 & (1<<i))
1535                                switch (i)
1536        {
1537        /* there is nothing we can (want  to) do at this time. Log a
1538         * message, we can switch on and off the specific values later on
1539        case SPIDER_NET_GPROPERINT:
1540        case SPIDER_NET_GMCTCRSNGINT:
1541        case SPIDER_NET_GMCTLCOLINT:
1542        case SPIDER_NET_GMCTTMOTINT:
1543        case SPIDER_NET_GMCRCAERINT:
1544        case SPIDER_NET_GMCRCALERINT:
1545        case SPIDER_NET_GMCRALNERINT:
1546        case SPIDER_NET_GMCROVRINT:
1547        case SPIDER_NET_GMCRRNTINT:
1548        case SPIDER_NET_GMCRRXERINT:
1549        case SPIDER_NET_GTITCSERINT:
1550        case SPIDER_NET_GTIFMTERINT:
1551        case SPIDER_NET_GTIPKTRVKINT:
1552        case SPIDER_NET_GTISPINGINT:
1553        case SPIDER_NET_GTISADNGINT:
1554        case SPIDER_NET_GTISPDNGINT:
1555        case SPIDER_NET_GRIFMTERINT:
1556        case SPIDER_NET_GRIPKTRVKINT:
1557        case SPIDER_NET_GRISPINGINT:
1558        case SPIDER_NET_GRISADNGINT:
1559        case SPIDER_NET_GRISPDNGINT:
1560                break;
1561        */
1562                default:
1563                        break;
1564        }
1565
1566        if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
1567                dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, "
1568                       "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1569                       status_reg, error_reg1, error_reg2);
1570
1571        /* clear interrupt sources */
1572        spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
1573        spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
1574}
1575
1576/**
1577 * spider_net_interrupt - interrupt handler for spider_net
1578 * @irq: interrupt number
1579 * @ptr: pointer to net_device
1580 *
1581 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1582 * interrupt found raised by card.
1583 *
1584 * This is the interrupt handler, that turns off
1585 * interrupts for this device and makes the stack poll the driver
1586 */
1587static irqreturn_t
1588spider_net_interrupt(int irq, void *ptr)
1589{
1590        struct net_device *netdev = ptr;
1591        struct spider_net_card *card = netdev_priv(netdev);
1592        u32 status_reg, error_reg1, error_reg2;
1593
1594        status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
1595        error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
1596        error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
1597
1598        if (!(status_reg & SPIDER_NET_INT0_MASK_VALUE) &&
1599            !(error_reg1 & SPIDER_NET_INT1_MASK_VALUE) &&
1600            !(error_reg2 & SPIDER_NET_INT2_MASK_VALUE))
1601                return IRQ_NONE;
1602
1603        if (status_reg & SPIDER_NET_RXINT ) {
1604                spider_net_rx_irq_off(card);
1605                napi_schedule(&card->napi);
1606                card->num_rx_ints ++;
1607        }
1608        if (status_reg & SPIDER_NET_TXINT)
1609                napi_schedule(&card->napi);
1610
1611        if (status_reg & SPIDER_NET_LINKINT)
1612                spider_net_link_reset(netdev);
1613
1614        if (status_reg & SPIDER_NET_ERRINT )
1615                spider_net_handle_error_irq(card, status_reg,
1616                                            error_reg1, error_reg2);
1617
1618        /* clear interrupt sources */
1619        spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
1620
1621        return IRQ_HANDLED;
1622}
1623
1624#ifdef CONFIG_NET_POLL_CONTROLLER
1625/**
1626 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1627 * @netdev: interface device structure
1628 *
1629 * see Documentation/networking/netconsole.txt
1630 */
1631static void
1632spider_net_poll_controller(struct net_device *netdev)
1633{
1634        disable_irq(netdev->irq);
1635        spider_net_interrupt(netdev->irq, netdev);
1636        enable_irq(netdev->irq);
1637}
1638#endif /* CONFIG_NET_POLL_CONTROLLER */
1639
1640/**
1641 * spider_net_enable_interrupts - enable interrupts
1642 * @card: card structure
1643 *
1644 * spider_net_enable_interrupt enables several interrupts
1645 */
1646static void
1647spider_net_enable_interrupts(struct spider_net_card *card)
1648{
1649        spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
1650                             SPIDER_NET_INT0_MASK_VALUE);
1651        spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
1652                             SPIDER_NET_INT1_MASK_VALUE);
1653        spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
1654                             SPIDER_NET_INT2_MASK_VALUE);
1655}
1656
1657/**
1658 * spider_net_disable_interrupts - disable interrupts
1659 * @card: card structure
1660 *
1661 * spider_net_disable_interrupts disables all the interrupts
1662 */
1663static void
1664spider_net_disable_interrupts(struct spider_net_card *card)
1665{
1666        spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
1667        spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
1668        spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
1669        spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1670}
1671
1672/**
1673 * spider_net_init_card - initializes the card
1674 * @card: card structure
1675 *
1676 * spider_net_init_card initializes the card so that other registers can
1677 * be used
1678 */
1679static void
1680spider_net_init_card(struct spider_net_card *card)
1681{
1682        spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1683                             SPIDER_NET_CKRCTRL_STOP_VALUE);
1684
1685        spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1686                             SPIDER_NET_CKRCTRL_RUN_VALUE);
1687
1688        /* trigger ETOMOD signal */
1689        spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1690                spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
1691
1692        spider_net_disable_interrupts(card);
1693}
1694
1695/**
1696 * spider_net_enable_card - enables the card by setting all kinds of regs
1697 * @card: card structure
1698 *
1699 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1700 */
1701static void
1702spider_net_enable_card(struct spider_net_card *card)
1703{
1704        int i;
1705        /* the following array consists of (register),(value) pairs
1706         * that are set in this function. A register of 0 ends the list */
1707        u32 regs[][2] = {
1708                { SPIDER_NET_GRESUMINTNUM, 0 },
1709                { SPIDER_NET_GREINTNUM, 0 },
1710
1711                /* set interrupt frame number registers */
1712                /* clear the single DMA engine registers first */
1713                { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1714                { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1715                { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1716                { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1717                /* then set, what we really need */
1718                { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
1719
1720                /* timer counter registers and stuff */
1721                { SPIDER_NET_GFREECNNUM, 0 },
1722                { SPIDER_NET_GONETIMENUM, 0 },
1723                { SPIDER_NET_GTOUTFRMNUM, 0 },
1724
1725                /* RX mode setting */
1726                { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
1727                /* TX mode setting */
1728                { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
1729                /* IPSEC mode setting */
1730                { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
1731
1732                { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
1733
1734                { SPIDER_NET_GMRWOLCTRL, 0 },
1735                { SPIDER_NET_GTESTMD, 0x10000000 },
1736                { SPIDER_NET_GTTQMSK, 0x00400040 },
1737
1738                { SPIDER_NET_GMACINTEN, 0 },
1739
1740                /* flow control stuff */
1741                { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
1742                { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
1743
1744                { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
1745                { 0, 0}
1746        };
1747
1748        i = 0;
1749        while (regs[i][0]) {
1750                spider_net_write_reg(card, regs[i][0], regs[i][1]);
1751                i++;
1752        }
1753
1754        /* clear unicast filter table entries 1 to 14 */
1755        for (i = 1; i <= 14; i++) {
1756                spider_net_write_reg(card,
1757                                     SPIDER_NET_GMRUAFILnR + i * 8,
1758                                     0x00080000);
1759                spider_net_write_reg(card,
1760                                     SPIDER_NET_GMRUAFILnR + i * 8 + 4,
1761                                     0x00000000);
1762        }
1763
1764        spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
1765
1766        spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
1767
1768        /* set chain tail address for RX chains and
1769         * enable DMA */
1770        spider_net_enable_rxchtails(card);
1771        spider_net_enable_rxdmac(card);
1772
1773        spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
1774
1775        spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
1776                             SPIDER_NET_LENLMT_VALUE);
1777        spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1778                             SPIDER_NET_OPMODE_VALUE);
1779
1780        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
1781                             SPIDER_NET_GDTBSTA);
1782}
1783
1784/**
1785 * spider_net_download_firmware - loads firmware into the adapter
1786 * @card: card structure
1787 * @firmware_ptr: pointer to firmware data
1788 *
1789 * spider_net_download_firmware loads the firmware data into the
1790 * adapter. It assumes the length etc. to be allright.
1791 */
1792static int
1793spider_net_download_firmware(struct spider_net_card *card,
1794                             const void *firmware_ptr)
1795{
1796        int sequencer, i;
1797        const u32 *fw_ptr = firmware_ptr;
1798
1799        /* stop sequencers */
1800        spider_net_write_reg(card, SPIDER_NET_GSINIT,
1801                             SPIDER_NET_STOP_SEQ_VALUE);
1802
1803        for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
1804             sequencer++) {
1805                spider_net_write_reg(card,
1806                                     SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
1807                for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
1808                        spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
1809                                             sequencer * 8, *fw_ptr);
1810                        fw_ptr++;
1811                }
1812        }
1813
1814        if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
1815                return -EIO;
1816
1817        spider_net_write_reg(card, SPIDER_NET_GSINIT,
1818                             SPIDER_NET_RUN_SEQ_VALUE);
1819
1820        return 0;
1821}
1822
1823/**
1824 * spider_net_init_firmware - reads in firmware parts
1825 * @card: card structure
1826 *
1827 * Returns 0 on success, <0 on failure
1828 *
1829 * spider_net_init_firmware opens the sequencer firmware and does some basic
1830 * checks. This function opens and releases the firmware structure. A call
1831 * to download the firmware is performed before the release.
1832 *
1833 * Firmware format
1834 * ===============
1835 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1836 * the program for each sequencer. Use the command
1837 *    tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt              \
1838 *         Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt   \
1839 *         Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1840 *
1841 * to generate spider_fw.bin, if you have sequencer programs with something
1842 * like the following contents for each sequencer:
1843 *    <ONE LINE COMMENT>
1844 *    <FIRST 4-BYTES-WORD FOR SEQUENCER>
1845 *    <SECOND 4-BYTES-WORD FOR SEQUENCER>
1846 *     ...
1847 *    <1024th 4-BYTES-WORD FOR SEQUENCER>
1848 */
1849static int
1850spider_net_init_firmware(struct spider_net_card *card)
1851{
1852        struct firmware *firmware = NULL;
1853        struct device_node *dn;
1854        const u8 *fw_prop = NULL;
1855        int err = -ENOENT;
1856        int fw_size;
1857
1858        if (request_firmware((const struct firmware **)&firmware,
1859                             SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
1860                if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
1861                     netif_msg_probe(card) ) {
1862                        dev_err(&card->netdev->dev,
1863                               "Incorrect size of spidernet firmware in " \
1864                               "filesystem. Looking in host firmware...\n");
1865                        goto try_host_fw;
1866                }
1867                err = spider_net_download_firmware(card, firmware->data);
1868
1869                release_firmware(firmware);
1870                if (err)
1871                        goto try_host_fw;
1872
1873                goto done;
1874        }
1875
1876try_host_fw:
1877        dn = pci_device_to_OF_node(card->pdev);
1878        if (!dn)
1879                goto out_err;
1880
1881        fw_prop = of_get_property(dn, "firmware", &fw_size);
1882        if (!fw_prop)
1883                goto out_err;
1884
1885        if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
1886             netif_msg_probe(card) ) {
1887                dev_err(&card->netdev->dev,
1888                       "Incorrect size of spidernet firmware in host firmware\n");
1889                goto done;
1890        }
1891
1892        err = spider_net_download_firmware(card, fw_prop);
1893
1894done:
1895        return err;
1896out_err:
1897        if (netif_msg_probe(card))
1898                dev_err(&card->netdev->dev,
1899                       "Couldn't find spidernet firmware in filesystem " \
1900                       "or host firmware\n");
1901        return err;
1902}
1903
1904/**
1905 * spider_net_open - called upon ifonfig up
1906 * @netdev: interface device structure
1907 *
1908 * returns 0 on success, <0 on failure
1909 *
1910 * spider_net_open allocates all the descriptors and memory needed for
1911 * operation, sets up multicast list and enables interrupts
1912 */
1913int
1914spider_net_open(struct net_device *netdev)
1915{
1916        struct spider_net_card *card = netdev_priv(netdev);
1917        int result;
1918
1919        result = spider_net_init_firmware(card);
1920        if (result)
1921                goto init_firmware_failed;
1922
1923        /* start probing with copper */
1924        card->aneg_count = 0;
1925        card->medium = BCM54XX_COPPER;
1926        spider_net_setup_aneg(card);
1927        if (card->phy.def->phy_id)
1928                mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1929
1930        result = spider_net_init_chain(card, &card->tx_chain);
1931        if (result)
1932                goto alloc_tx_failed;
1933        card->low_watermark = NULL;
1934
1935        result = spider_net_init_chain(card, &card->rx_chain);
1936        if (result)
1937                goto alloc_rx_failed;
1938
1939        /* Allocate rx skbs */
1940        result = spider_net_alloc_rx_skbs(card);
1941        if (result)
1942                goto alloc_skbs_failed;
1943
1944        spider_net_set_multi(netdev);
1945
1946        /* further enhancement: setup hw vlan, if needed */
1947
1948        result = -EBUSY;
1949        if (request_irq(netdev->irq, spider_net_interrupt,
1950                             IRQF_SHARED, netdev->name, netdev))
1951                goto register_int_failed;
1952
1953        spider_net_enable_card(card);
1954
1955        netif_start_queue(netdev);
1956        netif_carrier_on(netdev);
1957        napi_enable(&card->napi);
1958
1959        spider_net_enable_interrupts(card);
1960
1961        return 0;
1962
1963register_int_failed:
1964        spider_net_free_rx_chain_contents(card);
1965alloc_skbs_failed:
1966        spider_net_free_chain(card, &card->rx_chain);
1967alloc_rx_failed:
1968        spider_net_free_chain(card, &card->tx_chain);
1969alloc_tx_failed:
1970        del_timer_sync(&card->aneg_timer);
1971init_firmware_failed:
1972        return result;
1973}
1974
1975/**
1976 * spider_net_link_phy
1977 * @data: used for pointer to card structure
1978 *
1979 */
1980static void spider_net_link_phy(unsigned long data)
1981{
1982        struct spider_net_card *card = (struct spider_net_card *)data;
1983        struct mii_phy *phy = &card->phy;
1984
1985        /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
1986        if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) {
1987
1988                pr_debug("%s: link is down trying to bring it up\n",
1989                         card->netdev->name);
1990
1991                switch (card->medium) {
1992                case BCM54XX_COPPER:
1993                        /* enable fiber with autonegotiation first */
1994                        if (phy->def->ops->enable_fiber)
1995                                phy->def->ops->enable_fiber(phy, 1);
1996                        card->medium = BCM54XX_FIBER;
1997                        break;
1998
1999                case BCM54XX_FIBER:
2000                        /* fiber didn't come up, try to disable fiber autoneg */
2001                        if (phy->def->ops->enable_fiber)
2002                                phy->def->ops->enable_fiber(phy, 0);
2003                        card->medium = BCM54XX_UNKNOWN;
2004                        break;
2005
2006                case BCM54XX_UNKNOWN:
2007                        /* copper, fiber with and without failed,
2008                         * retry from beginning */
2009                        spider_net_setup_aneg(card);
2010                        card->medium = BCM54XX_COPPER;
2011                        break;
2012                }
2013
2014                card->aneg_count = 0;
2015                mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2016                return;
2017        }
2018
2019        /* link still not up, try again later */
2020        if (!(phy->def->ops->poll_link(phy))) {
2021                card->aneg_count++;
2022                mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2023                return;
2024        }
2025
2026        /* link came up, get abilities */
2027        phy->def->ops->read_link(phy);
2028
2029        spider_net_write_reg(card, SPIDER_NET_GMACST,
2030                             spider_net_read_reg(card, SPIDER_NET_GMACST));
2031        spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);
2032
2033        if (phy->speed == 1000)
2034                spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001);
2035        else
2036                spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0);
2037
2038        card->aneg_count = 0;
2039
2040        pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2041                card->netdev->name, phy->speed,
2042                phy->duplex == 1 ? "Full" : "Half",
2043                phy->autoneg == 1 ? "" : "no ");
2044}
2045
2046/**
2047 * spider_net_setup_phy - setup PHY
2048 * @card: card structure
2049 *
2050 * returns 0 on success, <0 on failure
2051 *
2052 * spider_net_setup_phy is used as part of spider_net_probe.
2053 **/
2054static int
2055spider_net_setup_phy(struct spider_net_card *card)
2056{
2057        struct mii_phy *phy = &card->phy;
2058
2059        spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
2060                             SPIDER_NET_DMASEL_VALUE);
2061        spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
2062                             SPIDER_NET_PHY_CTRL_VALUE);
2063
2064        phy->dev = card->netdev;
2065        phy->mdio_read = spider_net_read_phy;
2066        phy->mdio_write = spider_net_write_phy;
2067
2068        for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) {
2069                unsigned short id;
2070                id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
2071                if (id != 0x0000 && id != 0xffff) {
2072                        if (!sungem_phy_probe(phy, phy->mii_id)) {
2073                                pr_info("Found %s.\n", phy->def->name);
2074                                break;
2075                        }
2076                }
2077        }
2078
2079        return 0;
2080}
2081
2082/**
2083 * spider_net_workaround_rxramfull - work around firmware bug
2084 * @card: card structure
2085 *
2086 * no return value
2087 **/
2088static void
2089spider_net_workaround_rxramfull(struct spider_net_card *card)
2090{
2091        int i, sequencer = 0;
2092
2093        /* cancel reset */
2094        spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2095                             SPIDER_NET_CKRCTRL_RUN_VALUE);
2096
2097        /* empty sequencer data */
2098        for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
2099             sequencer++) {
2100                spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
2101                                     sequencer * 8, 0x0);
2102                for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
2103                        spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
2104                                             sequencer * 8, 0x0);
2105                }
2106        }
2107
2108        /* set sequencer operation */
2109        spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
2110
2111        /* reset */
2112        spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2113                             SPIDER_NET_CKRCTRL_STOP_VALUE);
2114}
2115
2116/**
2117 * spider_net_stop - called upon ifconfig down
2118 * @netdev: interface device structure
2119 *
2120 * always returns 0
2121 */
2122int
2123spider_net_stop(struct net_device *netdev)
2124{
2125        struct spider_net_card *card = netdev_priv(netdev);
2126
2127        napi_disable(&card->napi);
2128        netif_carrier_off(netdev);
2129        netif_stop_queue(netdev);
2130        del_timer_sync(&card->tx_timer);
2131        del_timer_sync(&card->aneg_timer);
2132
2133        spider_net_disable_interrupts(card);
2134
2135        free_irq(netdev->irq, netdev);
2136
2137        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
2138                             SPIDER_NET_DMA_TX_FEND_VALUE);
2139
2140        /* turn off DMA, force end */
2141        spider_net_disable_rxdmac(card);
2142
2143        /* release chains */
2144        spider_net_release_tx_chain(card, 1);
2145        spider_net_free_rx_chain_contents(card);
2146
2147        spider_net_free_chain(card, &card->tx_chain);
2148        spider_net_free_chain(card, &card->rx_chain);
2149
2150        return 0;
2151}
2152
2153/**
2154 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2155 * function (to be called not under interrupt status)
2156 * @data: data, is interface device structure
2157 *
2158 * called as task when tx hangs, resets interface (if interface is up)
2159 */
2160static void
2161spider_net_tx_timeout_task(struct work_struct *work)
2162{
2163        struct spider_net_card *card =
2164                container_of(work, struct spider_net_card, tx_timeout_task);
2165        struct net_device *netdev = card->netdev;
2166
2167        if (!(netdev->flags & IFF_UP))
2168                goto out;
2169
2170        netif_device_detach(netdev);
2171        spider_net_stop(netdev);
2172
2173        spider_net_workaround_rxramfull(card);
2174        spider_net_init_card(card);
2175
2176        if (spider_net_setup_phy(card))
2177                goto out;
2178
2179        spider_net_open(netdev);
2180        spider_net_kick_tx_dma(card);
2181        netif_device_attach(netdev);
2182
2183out:
2184        atomic_dec(&card->tx_timeout_task_counter);
2185}
2186
2187/**
2188 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2189 * @netdev: interface device structure
2190 *
2191 * called, if tx hangs. Schedules a task that resets the interface
2192 */
2193static void
2194spider_net_tx_timeout(struct net_device *netdev)
2195{
2196        struct spider_net_card *card;
2197
2198        card = netdev_priv(netdev);
2199        atomic_inc(&card->tx_timeout_task_counter);
2200        if (netdev->flags & IFF_UP)
2201                schedule_work(&card->tx_timeout_task);
2202        else
2203                atomic_dec(&card->tx_timeout_task_counter);
2204        card->spider_stats.tx_timeouts++;
2205}
2206
2207static const struct net_device_ops spider_net_ops = {
2208        .ndo_open               = spider_net_open,
2209        .ndo_stop               = spider_net_stop,
2210        .ndo_start_xmit         = spider_net_xmit,
2211        .ndo_set_rx_mode        = spider_net_set_multi,
2212        .ndo_set_mac_address    = spider_net_set_mac,
2213        .ndo_do_ioctl           = spider_net_do_ioctl,
2214        .ndo_tx_timeout         = spider_net_tx_timeout,
2215        .ndo_validate_addr      = eth_validate_addr,
2216        /* HW VLAN */
2217#ifdef CONFIG_NET_POLL_CONTROLLER
2218        /* poll controller */
2219        .ndo_poll_controller    = spider_net_poll_controller,
2220#endif /* CONFIG_NET_POLL_CONTROLLER */
2221};
2222
2223/**
2224 * spider_net_setup_netdev_ops - initialization of net_device operations
2225 * @netdev: net_device structure
2226 *
2227 * fills out function pointers in the net_device structure
2228 */
2229static void
2230spider_net_setup_netdev_ops(struct net_device *netdev)
2231{
2232        netdev->netdev_ops = &spider_net_ops;
2233        netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
2234        /* ethtool ops */
2235        netdev->ethtool_ops = &spider_net_ethtool_ops;
2236}
2237
2238/**
2239 * spider_net_setup_netdev - initialization of net_device
2240 * @card: card structure
2241 *
2242 * Returns 0 on success or <0 on failure
2243 *
2244 * spider_net_setup_netdev initializes the net_device structure
2245 **/
2246static int
2247spider_net_setup_netdev(struct spider_net_card *card)
2248{
2249        int result;
2250        struct net_device *netdev = card->netdev;
2251        struct device_node *dn;
2252        struct sockaddr addr;
2253        const u8 *mac;
2254
2255        SET_NETDEV_DEV(netdev, &card->pdev->dev);
2256
2257        pci_set_drvdata(card->pdev, netdev);
2258
2259        init_timer(&card->tx_timer);
2260        card->tx_timer.function =
2261                (void (*)(unsigned long)) spider_net_cleanup_tx_ring;
2262        card->tx_timer.data = (unsigned long) card;
2263        netdev->irq = card->pdev->irq;
2264
2265        card->aneg_count = 0;
2266        init_timer(&card->aneg_timer);
2267        card->aneg_timer.function = spider_net_link_phy;
2268        card->aneg_timer.data = (unsigned long) card;
2269
2270        netif_napi_add(netdev, &card->napi,
2271                       spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
2272
2273        spider_net_setup_netdev_ops(netdev);
2274
2275        netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
2276        if (SPIDER_NET_RX_CSUM_DEFAULT)
2277                netdev->features |= NETIF_F_RXCSUM;
2278        netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX;
2279        /* some time: NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
2280         *              NETIF_F_HW_VLAN_CTAG_FILTER */
2281
2282        /* MTU range: 64 - 2294 */
2283        netdev->min_mtu = SPIDER_NET_MIN_MTU;
2284        netdev->max_mtu = SPIDER_NET_MAX_MTU;
2285
2286        netdev->irq = card->pdev->irq;
2287        card->num_rx_ints = 0;
2288        card->ignore_rx_ramfull = 0;
2289
2290        dn = pci_device_to_OF_node(card->pdev);
2291        if (!dn)
2292                return -EIO;
2293
2294        mac = of_get_property(dn, "local-mac-address", NULL);
2295        if (!mac)
2296                return -EIO;
2297        memcpy(addr.sa_data, mac, ETH_ALEN);
2298
2299        result = spider_net_set_mac(netdev, &addr);
2300        if ((result) && (netif_msg_probe(card)))
2301                dev_err(&card->netdev->dev,
2302                        "Failed to set MAC address: %i\n", result);
2303
2304        result = register_netdev(netdev);
2305        if (result) {
2306                if (netif_msg_probe(card))
2307                        dev_err(&card->netdev->dev,
2308                                "Couldn't register net_device: %i\n", result);
2309                return result;
2310        }
2311
2312        if (netif_msg_probe(card))
2313                pr_info("Initialized device %s.\n", netdev->name);
2314
2315        return 0;
2316}
2317
2318/**
2319 * spider_net_alloc_card - allocates net_device and card structure
2320 *
2321 * returns the card structure or NULL in case of errors
2322 *
2323 * the card and net_device structures are linked to each other
2324 */
2325static struct spider_net_card *
2326spider_net_alloc_card(void)
2327{
2328        struct net_device *netdev;
2329        struct spider_net_card *card;
2330        size_t alloc_size;
2331
2332        alloc_size = sizeof(struct spider_net_card) +
2333           (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr);
2334        netdev = alloc_etherdev(alloc_size);
2335        if (!netdev)
2336                return NULL;
2337
2338        card = netdev_priv(netdev);
2339        card->netdev = netdev;
2340        card->msg_enable = SPIDER_NET_DEFAULT_MSG;
2341        INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task);
2342        init_waitqueue_head(&card->waitq);
2343        atomic_set(&card->tx_timeout_task_counter, 0);
2344
2345        card->rx_chain.num_desc = rx_descriptors;
2346        card->rx_chain.ring = card->darray;
2347        card->tx_chain.num_desc = tx_descriptors;
2348        card->tx_chain.ring = card->darray + rx_descriptors;
2349
2350        return card;
2351}
2352
2353/**
2354 * spider_net_undo_pci_setup - releases PCI ressources
2355 * @card: card structure
2356 *
2357 * spider_net_undo_pci_setup releases the mapped regions
2358 */
2359static void
2360spider_net_undo_pci_setup(struct spider_net_card *card)
2361{
2362        iounmap(card->regs);
2363        pci_release_regions(card->pdev);
2364}
2365
2366/**
2367 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2368 * @pdev: PCI device
2369 *
2370 * Returns the card structure or NULL if any errors occur
2371 *
2372 * spider_net_setup_pci_dev initializes pdev and together with the
2373 * functions called in spider_net_open configures the device so that
2374 * data can be transferred over it
2375 * The net_device structure is attached to the card structure, if the
2376 * function returns without error.
2377 **/
2378static struct spider_net_card *
2379spider_net_setup_pci_dev(struct pci_dev *pdev)
2380{
2381        struct spider_net_card *card;
2382        unsigned long mmio_start, mmio_len;
2383
2384        if (pci_enable_device(pdev)) {
2385                dev_err(&pdev->dev, "Couldn't enable PCI device\n");
2386                return NULL;
2387        }
2388
2389        if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2390                dev_err(&pdev->dev,
2391                        "Couldn't find proper PCI device base address.\n");
2392                goto out_disable_dev;
2393        }
2394
2395        if (pci_request_regions(pdev, spider_net_driver_name)) {
2396                dev_err(&pdev->dev,
2397                        "Couldn't obtain PCI resources, aborting.\n");
2398                goto out_disable_dev;
2399        }
2400
2401        pci_set_master(pdev);
2402
2403        card = spider_net_alloc_card();
2404        if (!card) {
2405                dev_err(&pdev->dev,
2406                        "Couldn't allocate net_device structure, aborting.\n");
2407                goto out_release_regions;
2408        }
2409        card->pdev = pdev;
2410
2411        /* fetch base address and length of first resource */
2412        mmio_start = pci_resource_start(pdev, 0);
2413        mmio_len = pci_resource_len(pdev, 0);
2414
2415        card->netdev->mem_start = mmio_start;
2416        card->netdev->mem_end = mmio_start + mmio_len;
2417        card->regs = ioremap(mmio_start, mmio_len);
2418
2419        if (!card->regs) {
2420                dev_err(&pdev->dev,
2421                        "Couldn't obtain PCI resources, aborting.\n");
2422                goto out_release_regions;
2423        }
2424
2425        return card;
2426
2427out_release_regions:
2428        pci_release_regions(pdev);
2429out_disable_dev:
2430        pci_disable_device(pdev);
2431        return NULL;
2432}
2433
2434/**
2435 * spider_net_probe - initialization of a device
2436 * @pdev: PCI device
2437 * @ent: entry in the device id list
2438 *
2439 * Returns 0 on success, <0 on failure
2440 *
2441 * spider_net_probe initializes pdev and registers a net_device
2442 * structure for it. After that, the device can be ifconfig'ed up
2443 **/
2444static int
2445spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2446{
2447        int err = -EIO;
2448        struct spider_net_card *card;
2449
2450        card = spider_net_setup_pci_dev(pdev);
2451        if (!card)
2452                goto out;
2453
2454        spider_net_workaround_rxramfull(card);
2455        spider_net_init_card(card);
2456
2457        err = spider_net_setup_phy(card);
2458        if (err)
2459                goto out_undo_pci;
2460
2461        err = spider_net_setup_netdev(card);
2462        if (err)
2463                goto out_undo_pci;
2464
2465        return 0;
2466
2467out_undo_pci:
2468        spider_net_undo_pci_setup(card);
2469        free_netdev(card->netdev);
2470out:
2471        return err;
2472}
2473
2474/**
2475 * spider_net_remove - removal of a device
2476 * @pdev: PCI device
2477 *
2478 * Returns 0 on success, <0 on failure
2479 *
2480 * spider_net_remove is called to remove the device and unregisters the
2481 * net_device
2482 **/
2483static void
2484spider_net_remove(struct pci_dev *pdev)
2485{
2486        struct net_device *netdev;
2487        struct spider_net_card *card;
2488
2489        netdev = pci_get_drvdata(pdev);
2490        card = netdev_priv(netdev);
2491
2492        wait_event(card->waitq,
2493                   atomic_read(&card->tx_timeout_task_counter) == 0);
2494
2495        unregister_netdev(netdev);
2496
2497        /* switch off card */
2498        spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2499                             SPIDER_NET_CKRCTRL_STOP_VALUE);
2500        spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2501                             SPIDER_NET_CKRCTRL_RUN_VALUE);
2502
2503        spider_net_undo_pci_setup(card);
2504        free_netdev(netdev);
2505}
2506
2507static struct pci_driver spider_net_driver = {
2508        .name           = spider_net_driver_name,
2509        .id_table       = spider_net_pci_tbl,
2510        .probe          = spider_net_probe,
2511        .remove         = spider_net_remove
2512};
2513
2514/**
2515 * spider_net_init - init function when the driver is loaded
2516 *
2517 * spider_net_init registers the device driver
2518 */
2519static int __init spider_net_init(void)
2520{
2521        printk(KERN_INFO "Spidernet version %s.\n", VERSION);
2522
2523        if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
2524                rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
2525                pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2526        }
2527        if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
2528                rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
2529                pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2530        }
2531        if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
2532                tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
2533                pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2534        }
2535        if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
2536                tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
2537                pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2538        }
2539
2540        return pci_register_driver(&spider_net_driver);
2541}
2542
2543/**
2544 * spider_net_cleanup - exit function when driver is unloaded
2545 *
2546 * spider_net_cleanup unregisters the device driver
2547 */
2548static void __exit spider_net_cleanup(void)
2549{
2550        pci_unregister_driver(&spider_net_driver);
2551}
2552
2553module_init(spider_net_init);
2554module_exit(spider_net_cleanup);
2555