linux/drivers/net/wireless/intel/iwlegacy/4965-mac.c
<<
>>
Prefs
   1/******************************************************************************
   2 *
   3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
   4 *
   5 * Portions of this file are derived from the ipw3945 project, as well
   6 * as portions of the ieee80211 subsystem header files.
   7 *
   8 * This program is free software; you can redistribute it and/or modify it
   9 * under the terms of version 2 of the GNU General Public License as
  10 * published by the Free Software Foundation.
  11 *
  12 * This program is distributed in the hope that it will be useful, but WITHOUT
  13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  15 * more details.
  16 *
  17 * You should have received a copy of the GNU General Public License along with
  18 * this program; if not, write to the Free Software Foundation, Inc.,
  19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  20 *
  21 * The full GNU General Public License is included in this distribution in the
  22 * file called LICENSE.
  23 *
  24 * Contact Information:
  25 *  Intel Linux Wireless <ilw@linux.intel.com>
  26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27 *
  28 *****************************************************************************/
  29
  30#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  31
  32#include <linux/kernel.h>
  33#include <linux/module.h>
  34#include <linux/init.h>
  35#include <linux/pci.h>
  36#include <linux/pci-aspm.h>
  37#include <linux/slab.h>
  38#include <linux/dma-mapping.h>
  39#include <linux/delay.h>
  40#include <linux/sched.h>
  41#include <linux/skbuff.h>
  42#include <linux/netdevice.h>
  43#include <linux/firmware.h>
  44#include <linux/etherdevice.h>
  45#include <linux/if_arp.h>
  46
  47#include <net/mac80211.h>
  48
  49#include <asm/div64.h>
  50
  51#define DRV_NAME        "iwl4965"
  52
  53#include "common.h"
  54#include "4965.h"
  55
  56/******************************************************************************
  57 *
  58 * module boiler plate
  59 *
  60 ******************************************************************************/
  61
  62/*
  63 * module name, copyright, version, etc.
  64 */
  65#define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux"
  66
  67#ifdef CONFIG_IWLEGACY_DEBUG
  68#define VD "d"
  69#else
  70#define VD
  71#endif
  72
  73#define DRV_VERSION     IWLWIFI_VERSION VD
  74
  75MODULE_DESCRIPTION(DRV_DESCRIPTION);
  76MODULE_VERSION(DRV_VERSION);
  77MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
  78MODULE_LICENSE("GPL");
  79MODULE_ALIAS("iwl4965");
  80
  81void
  82il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status)
  83{
  84        if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
  85                IL_ERR("Tx flush command to flush out all frames\n");
  86                if (!test_bit(S_EXIT_PENDING, &il->status))
  87                        queue_work(il->workqueue, &il->tx_flush);
  88        }
  89}
  90
  91/*
  92 * EEPROM
  93 */
  94struct il_mod_params il4965_mod_params = {
  95        .restart_fw = 1,
  96        /* the rest are 0 by default */
  97};
  98
  99void
 100il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
 101{
 102        unsigned long flags;
 103        int i;
 104        spin_lock_irqsave(&rxq->lock, flags);
 105        INIT_LIST_HEAD(&rxq->rx_free);
 106        INIT_LIST_HEAD(&rxq->rx_used);
 107        /* Fill the rx_used queue with _all_ of the Rx buffers */
 108        for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 109                /* In the reset function, these buffers may have been allocated
 110                 * to an SKB, so we need to unmap and free potential storage */
 111                if (rxq->pool[i].page != NULL) {
 112                        pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
 113                                       PAGE_SIZE << il->hw_params.rx_page_order,
 114                                       PCI_DMA_FROMDEVICE);
 115                        __il_free_pages(il, rxq->pool[i].page);
 116                        rxq->pool[i].page = NULL;
 117                }
 118                list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
 119        }
 120
 121        for (i = 0; i < RX_QUEUE_SIZE; i++)
 122                rxq->queue[i] = NULL;
 123
 124        /* Set us so that we have processed and used all buffers, but have
 125         * not restocked the Rx queue with fresh buffers */
 126        rxq->read = rxq->write = 0;
 127        rxq->write_actual = 0;
 128        rxq->free_count = 0;
 129        spin_unlock_irqrestore(&rxq->lock, flags);
 130}
 131
 132int
 133il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
 134{
 135        u32 rb_size;
 136        const u32 rfdnlog = RX_QUEUE_SIZE_LOG;  /* 256 RBDs */
 137        u32 rb_timeout = 0;
 138
 139        if (il->cfg->mod_params->amsdu_size_8K)
 140                rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
 141        else
 142                rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
 143
 144        /* Stop Rx DMA */
 145        il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 146
 147        /* Reset driver's Rx queue write idx */
 148        il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
 149
 150        /* Tell device where to find RBD circular buffer in DRAM */
 151        il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8));
 152
 153        /* Tell device where in DRAM to update its Rx status */
 154        il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4);
 155
 156        /* Enable Rx DMA
 157         * Direct rx interrupts to hosts
 158         * Rx buffer size 4 or 8k
 159         * RB timeout 0x10
 160         * 256 RBDs
 161         */
 162        il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG,
 163              FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
 164              FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
 165              FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
 166              rb_size |
 167              (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) |
 168              (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 169
 170        /* Set interrupt coalescing timer to default (2048 usecs) */
 171        il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF);
 172
 173        return 0;
 174}
 175
 176static void
 177il4965_set_pwr_vmain(struct il_priv *il)
 178{
 179/*
 180 * (for documentation purposes)
 181 * to set power to V_AUX, do:
 182
 183                if (pci_pme_capable(il->pci_dev, PCI_D3cold))
 184                        il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
 185                                               APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 186                                               ~APMG_PS_CTRL_MSK_PWR_SRC);
 187 */
 188
 189        il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
 190                              APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 191                              ~APMG_PS_CTRL_MSK_PWR_SRC);
 192}
 193
 194int
 195il4965_hw_nic_init(struct il_priv *il)
 196{
 197        unsigned long flags;
 198        struct il_rx_queue *rxq = &il->rxq;
 199        int ret;
 200
 201        spin_lock_irqsave(&il->lock, flags);
 202        il_apm_init(il);
 203        /* Set interrupt coalescing calibration timer to default (512 usecs) */
 204        il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF);
 205        spin_unlock_irqrestore(&il->lock, flags);
 206
 207        il4965_set_pwr_vmain(il);
 208        il4965_nic_config(il);
 209
 210        /* Allocate the RX queue, or reset if it is already allocated */
 211        if (!rxq->bd) {
 212                ret = il_rx_queue_alloc(il);
 213                if (ret) {
 214                        IL_ERR("Unable to initialize Rx queue\n");
 215                        return -ENOMEM;
 216                }
 217        } else
 218                il4965_rx_queue_reset(il, rxq);
 219
 220        il4965_rx_replenish(il);
 221
 222        il4965_rx_init(il, rxq);
 223
 224        spin_lock_irqsave(&il->lock, flags);
 225
 226        rxq->need_update = 1;
 227        il_rx_queue_update_write_ptr(il, rxq);
 228
 229        spin_unlock_irqrestore(&il->lock, flags);
 230
 231        /* Allocate or reset and init all Tx and Command queues */
 232        if (!il->txq) {
 233                ret = il4965_txq_ctx_alloc(il);
 234                if (ret)
 235                        return ret;
 236        } else
 237                il4965_txq_ctx_reset(il);
 238
 239        set_bit(S_INIT, &il->status);
 240
 241        return 0;
 242}
 243
 244/**
 245 * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
 246 */
 247static inline __le32
 248il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
 249{
 250        return cpu_to_le32((u32) (dma_addr >> 8));
 251}
 252
 253/**
 254 * il4965_rx_queue_restock - refill RX queue from pre-allocated pool
 255 *
 256 * If there are slots in the RX queue that need to be restocked,
 257 * and we have free pre-allocated buffers, fill the ranks as much
 258 * as we can, pulling from rx_free.
 259 *
 260 * This moves the 'write' idx forward to catch up with 'processed', and
 261 * also updates the memory address in the firmware to reference the new
 262 * target buffer.
 263 */
 264void
 265il4965_rx_queue_restock(struct il_priv *il)
 266{
 267        struct il_rx_queue *rxq = &il->rxq;
 268        struct list_head *element;
 269        struct il_rx_buf *rxb;
 270        unsigned long flags;
 271
 272        spin_lock_irqsave(&rxq->lock, flags);
 273        while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
 274                /* The overwritten rxb must be a used one */
 275                rxb = rxq->queue[rxq->write];
 276                BUG_ON(rxb && rxb->page);
 277
 278                /* Get next free Rx buffer, remove from free list */
 279                element = rxq->rx_free.next;
 280                rxb = list_entry(element, struct il_rx_buf, list);
 281                list_del(element);
 282
 283                /* Point to Rx buffer via next RBD in circular buffer */
 284                rxq->bd[rxq->write] =
 285                    il4965_dma_addr2rbd_ptr(il, rxb->page_dma);
 286                rxq->queue[rxq->write] = rxb;
 287                rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 288                rxq->free_count--;
 289        }
 290        spin_unlock_irqrestore(&rxq->lock, flags);
 291        /* If the pre-allocated buffer pool is dropping low, schedule to
 292         * refill it */
 293        if (rxq->free_count <= RX_LOW_WATERMARK)
 294                queue_work(il->workqueue, &il->rx_replenish);
 295
 296        /* If we've added more space for the firmware to place data, tell it.
 297         * Increment device's write pointer in multiples of 8. */
 298        if (rxq->write_actual != (rxq->write & ~0x7)) {
 299                spin_lock_irqsave(&rxq->lock, flags);
 300                rxq->need_update = 1;
 301                spin_unlock_irqrestore(&rxq->lock, flags);
 302                il_rx_queue_update_write_ptr(il, rxq);
 303        }
 304}
 305
 306/**
 307 * il4965_rx_replenish - Move all used packet from rx_used to rx_free
 308 *
 309 * When moving to rx_free an SKB is allocated for the slot.
 310 *
 311 * Also restock the Rx queue via il_rx_queue_restock.
 312 * This is called as a scheduled work item (except for during initialization)
 313 */
 314static void
 315il4965_rx_allocate(struct il_priv *il, gfp_t priority)
 316{
 317        struct il_rx_queue *rxq = &il->rxq;
 318        struct list_head *element;
 319        struct il_rx_buf *rxb;
 320        struct page *page;
 321        dma_addr_t page_dma;
 322        unsigned long flags;
 323        gfp_t gfp_mask = priority;
 324
 325        while (1) {
 326                spin_lock_irqsave(&rxq->lock, flags);
 327                if (list_empty(&rxq->rx_used)) {
 328                        spin_unlock_irqrestore(&rxq->lock, flags);
 329                        return;
 330                }
 331                spin_unlock_irqrestore(&rxq->lock, flags);
 332
 333                if (rxq->free_count > RX_LOW_WATERMARK)
 334                        gfp_mask |= __GFP_NOWARN;
 335
 336                if (il->hw_params.rx_page_order > 0)
 337                        gfp_mask |= __GFP_COMP;
 338
 339                /* Alloc a new receive buffer */
 340                page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
 341                if (!page) {
 342                        if (net_ratelimit())
 343                                D_INFO("alloc_pages failed, " "order: %d\n",
 344                                       il->hw_params.rx_page_order);
 345
 346                        if (rxq->free_count <= RX_LOW_WATERMARK &&
 347                            net_ratelimit())
 348                                IL_ERR("Failed to alloc_pages with %s. "
 349                                       "Only %u free buffers remaining.\n",
 350                                       priority ==
 351                                       GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
 352                                       rxq->free_count);
 353                        /* We don't reschedule replenish work here -- we will
 354                         * call the restock method and if it still needs
 355                         * more buffers it will schedule replenish */
 356                        return;
 357                }
 358
 359                /* Get physical address of the RB */
 360                page_dma =
 361                    pci_map_page(il->pci_dev, page, 0,
 362                                 PAGE_SIZE << il->hw_params.rx_page_order,
 363                                 PCI_DMA_FROMDEVICE);
 364                if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) {
 365                        __free_pages(page, il->hw_params.rx_page_order);
 366                        break;
 367                }
 368
 369                spin_lock_irqsave(&rxq->lock, flags);
 370
 371                if (list_empty(&rxq->rx_used)) {
 372                        spin_unlock_irqrestore(&rxq->lock, flags);
 373                        pci_unmap_page(il->pci_dev, page_dma,
 374                                       PAGE_SIZE << il->hw_params.rx_page_order,
 375                                       PCI_DMA_FROMDEVICE);
 376                        __free_pages(page, il->hw_params.rx_page_order);
 377                        return;
 378                }
 379
 380                element = rxq->rx_used.next;
 381                rxb = list_entry(element, struct il_rx_buf, list);
 382                list_del(element);
 383
 384                BUG_ON(rxb->page);
 385
 386                rxb->page = page;
 387                rxb->page_dma = page_dma;
 388                list_add_tail(&rxb->list, &rxq->rx_free);
 389                rxq->free_count++;
 390                il->alloc_rxb_page++;
 391
 392                spin_unlock_irqrestore(&rxq->lock, flags);
 393        }
 394}
 395
 396void
 397il4965_rx_replenish(struct il_priv *il)
 398{
 399        unsigned long flags;
 400
 401        il4965_rx_allocate(il, GFP_KERNEL);
 402
 403        spin_lock_irqsave(&il->lock, flags);
 404        il4965_rx_queue_restock(il);
 405        spin_unlock_irqrestore(&il->lock, flags);
 406}
 407
 408void
 409il4965_rx_replenish_now(struct il_priv *il)
 410{
 411        il4965_rx_allocate(il, GFP_ATOMIC);
 412
 413        il4965_rx_queue_restock(il);
 414}
 415
 416/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
 417 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
 418 * This free routine walks the list of POOL entries and if SKB is set to
 419 * non NULL it is unmapped and freed
 420 */
 421void
 422il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
 423{
 424        int i;
 425        for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
 426                if (rxq->pool[i].page != NULL) {
 427                        pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
 428                                       PAGE_SIZE << il->hw_params.rx_page_order,
 429                                       PCI_DMA_FROMDEVICE);
 430                        __il_free_pages(il, rxq->pool[i].page);
 431                        rxq->pool[i].page = NULL;
 432                }
 433        }
 434
 435        dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
 436                          rxq->bd_dma);
 437        dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
 438                          rxq->rb_stts, rxq->rb_stts_dma);
 439        rxq->bd = NULL;
 440        rxq->rb_stts = NULL;
 441}
 442
 443int
 444il4965_rxq_stop(struct il_priv *il)
 445{
 446        int ret;
 447
 448        _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 449        ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG,
 450                           FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
 451                           FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
 452                           1000);
 453        if (ret < 0)
 454                IL_ERR("Can't stop Rx DMA.\n");
 455
 456        return 0;
 457}
 458
 459int
 460il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band)
 461{
 462        int idx = 0;
 463        int band_offset = 0;
 464
 465        /* HT rate format: mac80211 wants an MCS number, which is just LSB */
 466        if (rate_n_flags & RATE_MCS_HT_MSK) {
 467                idx = (rate_n_flags & 0xff);
 468                return idx;
 469                /* Legacy rate format, search for match in table */
 470        } else {
 471                if (band == NL80211_BAND_5GHZ)
 472                        band_offset = IL_FIRST_OFDM_RATE;
 473                for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++)
 474                        if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
 475                                return idx - band_offset;
 476        }
 477
 478        return -1;
 479}
 480
 481static int
 482il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp)
 483{
 484        /* data from PHY/DSP regarding signal strength, etc.,
 485         *   contents are always there, not configurable by host.  */
 486        struct il4965_rx_non_cfg_phy *ncphy =
 487            (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
 488        u32 agc =
 489            (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >>
 490            IL49_AGC_DB_POS;
 491
 492        u32 valid_antennae =
 493            (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK)
 494            >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
 495        u8 max_rssi = 0;
 496        u32 i;
 497
 498        /* Find max rssi among 3 possible receivers.
 499         * These values are measured by the digital signal processor (DSP).
 500         * They should stay fairly constant even as the signal strength varies,
 501         *   if the radio's automatic gain control (AGC) is working right.
 502         * AGC value (see below) will provide the "interesting" info. */
 503        for (i = 0; i < 3; i++)
 504                if (valid_antennae & (1 << i))
 505                        max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
 506
 507        D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
 508                ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
 509                max_rssi, agc);
 510
 511        /* dBm = max_rssi dB - agc dB - constant.
 512         * Higher AGC (higher radio gain) means lower signal. */
 513        return max_rssi - agc - IL4965_RSSI_OFFSET;
 514}
 515
 516static u32
 517il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
 518{
 519        u32 decrypt_out = 0;
 520
 521        if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
 522            RX_RES_STATUS_STATION_FOUND)
 523                decrypt_out |=
 524                    (RX_RES_STATUS_STATION_FOUND |
 525                     RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
 526
 527        decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
 528
 529        /* packet was not encrypted */
 530        if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
 531            RX_RES_STATUS_SEC_TYPE_NONE)
 532                return decrypt_out;
 533
 534        /* packet was encrypted with unknown alg */
 535        if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
 536            RX_RES_STATUS_SEC_TYPE_ERR)
 537                return decrypt_out;
 538
 539        /* decryption was not done in HW */
 540        if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
 541            RX_MPDU_RES_STATUS_DEC_DONE_MSK)
 542                return decrypt_out;
 543
 544        switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
 545
 546        case RX_RES_STATUS_SEC_TYPE_CCMP:
 547                /* alg is CCM: check MIC only */
 548                if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
 549                        /* Bad MIC */
 550                        decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
 551                else
 552                        decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
 553
 554                break;
 555
 556        case RX_RES_STATUS_SEC_TYPE_TKIP:
 557                if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
 558                        /* Bad TTAK */
 559                        decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
 560                        break;
 561                }
 562                /* fall through if TTAK OK */
 563        default:
 564                if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
 565                        decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
 566                else
 567                        decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
 568                break;
 569        }
 570
 571        D_RX("decrypt_in:0x%x  decrypt_out = 0x%x\n", decrypt_in, decrypt_out);
 572
 573        return decrypt_out;
 574}
 575
 576#define SMALL_PACKET_SIZE 256
 577
 578static void
 579il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr,
 580                               u32 len, u32 ampdu_status, struct il_rx_buf *rxb,
 581                               struct ieee80211_rx_status *stats)
 582{
 583        struct sk_buff *skb;
 584        __le16 fc = hdr->frame_control;
 585
 586        /* We only process data packets if the interface is open */
 587        if (unlikely(!il->is_open)) {
 588                D_DROP("Dropping packet while interface is not open.\n");
 589                return;
 590        }
 591
 592        if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
 593                il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
 594                D_INFO("Woke queues - frame received on passive channel\n");
 595        }
 596
 597        /* In case of HW accelerated crypto and bad decryption, drop */
 598        if (!il->cfg->mod_params->sw_crypto &&
 599            il_set_decrypted_flag(il, hdr, ampdu_status, stats))
 600                return;
 601
 602        skb = dev_alloc_skb(SMALL_PACKET_SIZE);
 603        if (!skb) {
 604                IL_ERR("dev_alloc_skb failed\n");
 605                return;
 606        }
 607
 608        if (len <= SMALL_PACKET_SIZE) {
 609                skb_put_data(skb, hdr, len);
 610        } else {
 611                skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb),
 612                                len, PAGE_SIZE << il->hw_params.rx_page_order);
 613                il->alloc_rxb_page--;
 614                rxb->page = NULL;
 615        }
 616
 617        il_update_stats(il, false, fc, len);
 618        memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
 619
 620        ieee80211_rx(il->hw, skb);
 621}
 622
 623/* Called for N_RX (legacy ABG frames), or
 624 * N_RX_MPDU (HT high-throughput N frames). */
 625static void
 626il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
 627{
 628        struct ieee80211_hdr *header;
 629        struct ieee80211_rx_status rx_status = {};
 630        struct il_rx_pkt *pkt = rxb_addr(rxb);
 631        struct il_rx_phy_res *phy_res;
 632        __le32 rx_pkt_status;
 633        struct il_rx_mpdu_res_start *amsdu;
 634        u32 len;
 635        u32 ampdu_status;
 636        u32 rate_n_flags;
 637
 638        /**
 639         * N_RX and N_RX_MPDU are handled differently.
 640         *      N_RX: physical layer info is in this buffer
 641         *      N_RX_MPDU: physical layer info was sent in separate
 642         *              command and cached in il->last_phy_res
 643         *
 644         * Here we set up local variables depending on which command is
 645         * received.
 646         */
 647        if (pkt->hdr.cmd == N_RX) {
 648                phy_res = (struct il_rx_phy_res *)pkt->u.raw;
 649                header =
 650                    (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) +
 651                                             phy_res->cfg_phy_cnt);
 652
 653                len = le16_to_cpu(phy_res->byte_count);
 654                rx_pkt_status =
 655                    *(__le32 *) (pkt->u.raw + sizeof(*phy_res) +
 656                                 phy_res->cfg_phy_cnt + len);
 657                ampdu_status = le32_to_cpu(rx_pkt_status);
 658        } else {
 659                if (!il->_4965.last_phy_res_valid) {
 660                        IL_ERR("MPDU frame without cached PHY data\n");
 661                        return;
 662                }
 663                phy_res = &il->_4965.last_phy_res;
 664                amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw;
 665                header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
 666                len = le16_to_cpu(amsdu->byte_count);
 667                rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len);
 668                ampdu_status =
 669                    il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status));
 670        }
 671
 672        if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
 673                D_DROP("dsp size out of range [0,20]: %d\n",
 674                       phy_res->cfg_phy_cnt);
 675                return;
 676        }
 677
 678        if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
 679            !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
 680                D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status));
 681                return;
 682        }
 683
 684        /* This will be used in several places later */
 685        rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
 686
 687        /* rx_status carries information about the packet to mac80211 */
 688        rx_status.mactime = le64_to_cpu(phy_res->timestamp);
 689        rx_status.band =
 690            (phy_res->
 691             phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ :
 692            NL80211_BAND_5GHZ;
 693        rx_status.freq =
 694            ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
 695                                           rx_status.band);
 696        rx_status.rate_idx =
 697            il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
 698        rx_status.flag = 0;
 699
 700        /* TSF isn't reliable. In order to allow smooth user experience,
 701         * this W/A doesn't propagate it to the mac80211 */
 702        /*rx_status.flag |= RX_FLAG_MACTIME_START; */
 703
 704        il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
 705
 706        /* Find max signal strength (dBm) among 3 antenna/receiver chains */
 707        rx_status.signal = il4965_calc_rssi(il, phy_res);
 708
 709        D_STATS("Rssi %d, TSF %llu\n", rx_status.signal,
 710                (unsigned long long)rx_status.mactime);
 711
 712        /*
 713         * "antenna number"
 714         *
 715         * It seems that the antenna field in the phy flags value
 716         * is actually a bit field. This is undefined by radiotap,
 717         * it wants an actual antenna number but I always get "7"
 718         * for most legacy frames I receive indicating that the
 719         * same frame was received on all three RX chains.
 720         *
 721         * I think this field should be removed in favor of a
 722         * new 802.11n radiotap field "RX chains" that is defined
 723         * as a bitmask.
 724         */
 725        rx_status.antenna =
 726            (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
 727            RX_RES_PHY_FLAGS_ANTENNA_POS;
 728
 729        /* set the preamble flag if appropriate */
 730        if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 731                rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE;
 732
 733        /* Set up the HT phy flags */
 734        if (rate_n_flags & RATE_MCS_HT_MSK)
 735                rx_status.encoding = RX_ENC_HT;
 736        if (rate_n_flags & RATE_MCS_HT40_MSK)
 737                rx_status.bw = RATE_INFO_BW_40;
 738        else
 739                rx_status.bw = RATE_INFO_BW_20;
 740        if (rate_n_flags & RATE_MCS_SGI_MSK)
 741                rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI;
 742
 743        if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) {
 744                /* We know which subframes of an A-MPDU belong
 745                 * together since we get a single PHY response
 746                 * from the firmware for all of them.
 747                 */
 748
 749                rx_status.flag |= RX_FLAG_AMPDU_DETAILS;
 750                rx_status.ampdu_reference = il->_4965.ampdu_ref;
 751        }
 752
 753        il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb,
 754                                       &rx_status);
 755}
 756
 757/* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY).
 758 * This will be used later in il_hdl_rx() for N_RX_MPDU. */
 759static void
 760il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb)
 761{
 762        struct il_rx_pkt *pkt = rxb_addr(rxb);
 763        il->_4965.last_phy_res_valid = true;
 764        il->_4965.ampdu_ref++;
 765        memcpy(&il->_4965.last_phy_res, pkt->u.raw,
 766               sizeof(struct il_rx_phy_res));
 767}
 768
 769static int
 770il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif,
 771                             enum nl80211_band band, u8 is_active,
 772                             u8 n_probes, struct il_scan_channel *scan_ch)
 773{
 774        struct ieee80211_channel *chan;
 775        const struct ieee80211_supported_band *sband;
 776        const struct il_channel_info *ch_info;
 777        u16 passive_dwell = 0;
 778        u16 active_dwell = 0;
 779        int added, i;
 780        u16 channel;
 781
 782        sband = il_get_hw_mode(il, band);
 783        if (!sband)
 784                return 0;
 785
 786        active_dwell = il_get_active_dwell_time(il, band, n_probes);
 787        passive_dwell = il_get_passive_dwell_time(il, band, vif);
 788
 789        if (passive_dwell <= active_dwell)
 790                passive_dwell = active_dwell + 1;
 791
 792        for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
 793                chan = il->scan_request->channels[i];
 794
 795                if (chan->band != band)
 796                        continue;
 797
 798                channel = chan->hw_value;
 799                scan_ch->channel = cpu_to_le16(channel);
 800
 801                ch_info = il_get_channel_info(il, band, channel);
 802                if (!il_is_channel_valid(ch_info)) {
 803                        D_SCAN("Channel %d is INVALID for this band.\n",
 804                               channel);
 805                        continue;
 806                }
 807
 808                if (!is_active || il_is_channel_passive(ch_info) ||
 809                    (chan->flags & IEEE80211_CHAN_NO_IR))
 810                        scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
 811                else
 812                        scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
 813
 814                if (n_probes)
 815                        scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes);
 816
 817                scan_ch->active_dwell = cpu_to_le16(active_dwell);
 818                scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
 819
 820                /* Set txpower levels to defaults */
 821                scan_ch->dsp_atten = 110;
 822
 823                /* NOTE: if we were doing 6Mb OFDM for scans we'd use
 824                 * power level:
 825                 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
 826                 */
 827                if (band == NL80211_BAND_5GHZ)
 828                        scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
 829                else
 830                        scan_ch->tx_gain = ((1 << 5) | (5 << 3));
 831
 832                D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel,
 833                       le32_to_cpu(scan_ch->type),
 834                       (scan_ch->
 835                        type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE",
 836                       (scan_ch->
 837                        type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell :
 838                       passive_dwell);
 839
 840                scan_ch++;
 841                added++;
 842        }
 843
 844        D_SCAN("total channels to scan %d\n", added);
 845        return added;
 846}
 847
 848static void
 849il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid)
 850{
 851        int i;
 852        u8 ind = *ant;
 853
 854        for (i = 0; i < RATE_ANT_NUM - 1; i++) {
 855                ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
 856                if (valid & BIT(ind)) {
 857                        *ant = ind;
 858                        return;
 859                }
 860        }
 861}
 862
 863int
 864il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
 865{
 866        struct il_host_cmd cmd = {
 867                .id = C_SCAN,
 868                .len = sizeof(struct il_scan_cmd),
 869                .flags = CMD_SIZE_HUGE,
 870        };
 871        struct il_scan_cmd *scan;
 872        u32 rate_flags = 0;
 873        u16 cmd_len;
 874        u16 rx_chain = 0;
 875        enum nl80211_band band;
 876        u8 n_probes = 0;
 877        u8 rx_ant = il->hw_params.valid_rx_ant;
 878        u8 rate;
 879        bool is_active = false;
 880        int chan_mod;
 881        u8 active_chains;
 882        u8 scan_tx_antennas = il->hw_params.valid_tx_ant;
 883        int ret;
 884
 885        lockdep_assert_held(&il->mutex);
 886
 887        if (!il->scan_cmd) {
 888                il->scan_cmd =
 889                    kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE,
 890                            GFP_KERNEL);
 891                if (!il->scan_cmd) {
 892                        D_SCAN("fail to allocate memory for scan\n");
 893                        return -ENOMEM;
 894                }
 895        }
 896        scan = il->scan_cmd;
 897        memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE);
 898
 899        scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
 900        scan->quiet_time = IL_ACTIVE_QUIET_TIME;
 901
 902        if (il_is_any_associated(il)) {
 903                u16 interval;
 904                u32 extra;
 905                u32 suspend_time = 100;
 906                u32 scan_suspend_time = 100;
 907
 908                D_INFO("Scanning while associated...\n");
 909                interval = vif->bss_conf.beacon_int;
 910
 911                scan->suspend_time = 0;
 912                scan->max_out_time = cpu_to_le32(200 * 1024);
 913                if (!interval)
 914                        interval = suspend_time;
 915
 916                extra = (suspend_time / interval) << 22;
 917                scan_suspend_time =
 918                    (extra | ((suspend_time % interval) * 1024));
 919                scan->suspend_time = cpu_to_le32(scan_suspend_time);
 920                D_SCAN("suspend_time 0x%X beacon interval %d\n",
 921                       scan_suspend_time, interval);
 922        }
 923
 924        if (il->scan_request->n_ssids) {
 925                int i, p = 0;
 926                D_SCAN("Kicking off active scan\n");
 927                for (i = 0; i < il->scan_request->n_ssids; i++) {
 928                        /* always does wildcard anyway */
 929                        if (!il->scan_request->ssids[i].ssid_len)
 930                                continue;
 931                        scan->direct_scan[p].id = WLAN_EID_SSID;
 932                        scan->direct_scan[p].len =
 933                            il->scan_request->ssids[i].ssid_len;
 934                        memcpy(scan->direct_scan[p].ssid,
 935                               il->scan_request->ssids[i].ssid,
 936                               il->scan_request->ssids[i].ssid_len);
 937                        n_probes++;
 938                        p++;
 939                }
 940                is_active = true;
 941        } else
 942                D_SCAN("Start passive scan.\n");
 943
 944        scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
 945        scan->tx_cmd.sta_id = il->hw_params.bcast_id;
 946        scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 947
 948        switch (il->scan_band) {
 949        case NL80211_BAND_2GHZ:
 950                scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 951                chan_mod =
 952                    le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >>
 953                    RXON_FLG_CHANNEL_MODE_POS;
 954                if (chan_mod == CHANNEL_MODE_PURE_40) {
 955                        rate = RATE_6M_PLCP;
 956                } else {
 957                        rate = RATE_1M_PLCP;
 958                        rate_flags = RATE_MCS_CCK_MSK;
 959                }
 960                break;
 961        case NL80211_BAND_5GHZ:
 962                rate = RATE_6M_PLCP;
 963                break;
 964        default:
 965                IL_WARN("Invalid scan band\n");
 966                return -EIO;
 967        }
 968
 969        /*
 970         * If active scanning is requested but a certain channel is
 971         * marked passive, we can do active scanning if we detect
 972         * transmissions.
 973         *
 974         * There is an issue with some firmware versions that triggers
 975         * a sysassert on a "good CRC threshold" of zero (== disabled),
 976         * on a radar channel even though this means that we should NOT
 977         * send probes.
 978         *
 979         * The "good CRC threshold" is the number of frames that we
 980         * need to receive during our dwell time on a channel before
 981         * sending out probes -- setting this to a huge value will
 982         * mean we never reach it, but at the same time work around
 983         * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER
 984         * here instead of IL_GOOD_CRC_TH_DISABLED.
 985         */
 986        scan->good_CRC_th =
 987            is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
 988
 989        band = il->scan_band;
 990
 991        if (il->cfg->scan_rx_antennas[band])
 992                rx_ant = il->cfg->scan_rx_antennas[band];
 993
 994        il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas);
 995        rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS;
 996        scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags);
 997
 998        /* In power save mode use one chain, otherwise use all chains */
 999        if (test_bit(S_POWER_PMI, &il->status)) {
1000                /* rx_ant has been set to all valid chains previously */
1001                active_chains =
1002                    rx_ant & ((u8) (il->chain_noise_data.active_chains));
1003                if (!active_chains)
1004                        active_chains = rx_ant;
1005
1006                D_SCAN("chain_noise_data.active_chains: %u\n",
1007                       il->chain_noise_data.active_chains);
1008
1009                rx_ant = il4965_first_antenna(active_chains);
1010        }
1011
1012        /* MIMO is not used here, but value is required */
1013        rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
1014        rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
1015        rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
1016        rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
1017        scan->rx_chain = cpu_to_le16(rx_chain);
1018
1019        cmd_len =
1020            il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
1021                              vif->addr, il->scan_request->ie,
1022                              il->scan_request->ie_len,
1023                              IL_MAX_SCAN_SIZE - sizeof(*scan));
1024        scan->tx_cmd.len = cpu_to_le16(cmd_len);
1025
1026        scan->filter_flags |=
1027            (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK);
1028
1029        scan->channel_count =
1030            il4965_get_channels_for_scan(il, vif, band, is_active, n_probes,
1031                                         (void *)&scan->data[cmd_len]);
1032        if (scan->channel_count == 0) {
1033                D_SCAN("channel count %d\n", scan->channel_count);
1034                return -EIO;
1035        }
1036
1037        cmd.len +=
1038            le16_to_cpu(scan->tx_cmd.len) +
1039            scan->channel_count * sizeof(struct il_scan_channel);
1040        cmd.data = scan;
1041        scan->len = cpu_to_le16(cmd.len);
1042
1043        set_bit(S_SCAN_HW, &il->status);
1044
1045        ret = il_send_cmd_sync(il, &cmd);
1046        if (ret)
1047                clear_bit(S_SCAN_HW, &il->status);
1048
1049        return ret;
1050}
1051
1052int
1053il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
1054                           bool add)
1055{
1056        struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
1057
1058        if (add)
1059                return il4965_add_bssid_station(il, vif->bss_conf.bssid,
1060                                                &vif_priv->ibss_bssid_sta_id);
1061        return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
1062                                 vif->bss_conf.bssid);
1063}
1064
1065void
1066il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed)
1067{
1068        lockdep_assert_held(&il->sta_lock);
1069
1070        if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed)
1071                il->stations[sta_id].tid[tid].tfds_in_queue -= freed;
1072        else {
1073                D_TX("free more than tfds_in_queue (%u:%d)\n",
1074                     il->stations[sta_id].tid[tid].tfds_in_queue, freed);
1075                il->stations[sta_id].tid[tid].tfds_in_queue = 0;
1076        }
1077}
1078
1079#define IL_TX_QUEUE_MSK 0xfffff
1080
1081static bool
1082il4965_is_single_rx_stream(struct il_priv *il)
1083{
1084        return il->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
1085            il->current_ht_config.single_chain_sufficient;
1086}
1087
1088#define IL_NUM_RX_CHAINS_MULTIPLE       3
1089#define IL_NUM_RX_CHAINS_SINGLE 2
1090#define IL_NUM_IDLE_CHAINS_DUAL 2
1091#define IL_NUM_IDLE_CHAINS_SINGLE       1
1092
1093/*
1094 * Determine how many receiver/antenna chains to use.
1095 *
1096 * More provides better reception via diversity.  Fewer saves power
1097 * at the expense of throughput, but only when not in powersave to
1098 * start with.
1099 *
1100 * MIMO (dual stream) requires at least 2, but works better with 3.
1101 * This does not determine *which* chains to use, just how many.
1102 */
1103static int
1104il4965_get_active_rx_chain_count(struct il_priv *il)
1105{
1106        /* # of Rx chains to use when expecting MIMO. */
1107        if (il4965_is_single_rx_stream(il))
1108                return IL_NUM_RX_CHAINS_SINGLE;
1109        else
1110                return IL_NUM_RX_CHAINS_MULTIPLE;
1111}
1112
1113/*
1114 * When we are in power saving mode, unless device support spatial
1115 * multiplexing power save, use the active count for rx chain count.
1116 */
1117static int
1118il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt)
1119{
1120        /* # Rx chains when idling, depending on SMPS mode */
1121        switch (il->current_ht_config.smps) {
1122        case IEEE80211_SMPS_STATIC:
1123        case IEEE80211_SMPS_DYNAMIC:
1124                return IL_NUM_IDLE_CHAINS_SINGLE;
1125        case IEEE80211_SMPS_OFF:
1126                return active_cnt;
1127        default:
1128                WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps);
1129                return active_cnt;
1130        }
1131}
1132
1133/* up to 4 chains */
1134static u8
1135il4965_count_chain_bitmap(u32 chain_bitmap)
1136{
1137        u8 res;
1138        res = (chain_bitmap & BIT(0)) >> 0;
1139        res += (chain_bitmap & BIT(1)) >> 1;
1140        res += (chain_bitmap & BIT(2)) >> 2;
1141        res += (chain_bitmap & BIT(3)) >> 3;
1142        return res;
1143}
1144
1145/**
1146 * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
1147 *
1148 * Selects how many and which Rx receivers/antennas/chains to use.
1149 * This should not be used for scan command ... it puts data in wrong place.
1150 */
1151void
1152il4965_set_rxon_chain(struct il_priv *il)
1153{
1154        bool is_single = il4965_is_single_rx_stream(il);
1155        bool is_cam = !test_bit(S_POWER_PMI, &il->status);
1156        u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
1157        u32 active_chains;
1158        u16 rx_chain;
1159
1160        /* Tell uCode which antennas are actually connected.
1161         * Before first association, we assume all antennas are connected.
1162         * Just after first association, il4965_chain_noise_calibration()
1163         *    checks which antennas actually *are* connected. */
1164        if (il->chain_noise_data.active_chains)
1165                active_chains = il->chain_noise_data.active_chains;
1166        else
1167                active_chains = il->hw_params.valid_rx_ant;
1168
1169        rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
1170
1171        /* How many receivers should we use? */
1172        active_rx_cnt = il4965_get_active_rx_chain_count(il);
1173        idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt);
1174
1175        /* correct rx chain count according hw settings
1176         * and chain noise calibration
1177         */
1178        valid_rx_cnt = il4965_count_chain_bitmap(active_chains);
1179        if (valid_rx_cnt < active_rx_cnt)
1180                active_rx_cnt = valid_rx_cnt;
1181
1182        if (valid_rx_cnt < idle_rx_cnt)
1183                idle_rx_cnt = valid_rx_cnt;
1184
1185        rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
1186        rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
1187
1188        il->staging.rx_chain = cpu_to_le16(rx_chain);
1189
1190        if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam)
1191                il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
1192        else
1193                il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
1194
1195        D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain,
1196                active_rx_cnt, idle_rx_cnt);
1197
1198        WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
1199                active_rx_cnt < idle_rx_cnt);
1200}
1201
1202static const char *
1203il4965_get_fh_string(int cmd)
1204{
1205        switch (cmd) {
1206                IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG);
1207                IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG);
1208                IL_CMD(FH49_RSCSR_CHNL0_WPTR);
1209                IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG);
1210                IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG);
1211                IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG);
1212                IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
1213                IL_CMD(FH49_TSSR_TX_STATUS_REG);
1214                IL_CMD(FH49_TSSR_TX_ERROR_REG);
1215        default:
1216                return "UNKNOWN";
1217        }
1218}
1219
1220int
1221il4965_dump_fh(struct il_priv *il, char **buf, bool display)
1222{
1223        int i;
1224#ifdef CONFIG_IWLEGACY_DEBUG
1225        int pos = 0;
1226        size_t bufsz = 0;
1227#endif
1228        static const u32 fh_tbl[] = {
1229                FH49_RSCSR_CHNL0_STTS_WPTR_REG,
1230                FH49_RSCSR_CHNL0_RBDCB_BASE_REG,
1231                FH49_RSCSR_CHNL0_WPTR,
1232                FH49_MEM_RCSR_CHNL0_CONFIG_REG,
1233                FH49_MEM_RSSR_SHARED_CTRL_REG,
1234                FH49_MEM_RSSR_RX_STATUS_REG,
1235                FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
1236                FH49_TSSR_TX_STATUS_REG,
1237                FH49_TSSR_TX_ERROR_REG
1238        };
1239#ifdef CONFIG_IWLEGACY_DEBUG
1240        if (display) {
1241                bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
1242                *buf = kmalloc(bufsz, GFP_KERNEL);
1243                if (!*buf)
1244                        return -ENOMEM;
1245                pos +=
1246                    scnprintf(*buf + pos, bufsz - pos, "FH register values:\n");
1247                for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
1248                        pos +=
1249                            scnprintf(*buf + pos, bufsz - pos,
1250                                      "  %34s: 0X%08x\n",
1251                                      il4965_get_fh_string(fh_tbl[i]),
1252                                      il_rd(il, fh_tbl[i]));
1253                }
1254                return pos;
1255        }
1256#endif
1257        IL_ERR("FH register values:\n");
1258        for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
1259                IL_ERR("  %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]),
1260                       il_rd(il, fh_tbl[i]));
1261        }
1262        return 0;
1263}
1264
1265static void
1266il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb)
1267{
1268        struct il_rx_pkt *pkt = rxb_addr(rxb);
1269        struct il_missed_beacon_notif *missed_beacon;
1270
1271        missed_beacon = &pkt->u.missed_beacon;
1272        if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
1273            il->missed_beacon_threshold) {
1274                D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
1275                        le32_to_cpu(missed_beacon->consecutive_missed_beacons),
1276                        le32_to_cpu(missed_beacon->total_missed_becons),
1277                        le32_to_cpu(missed_beacon->num_recvd_beacons),
1278                        le32_to_cpu(missed_beacon->num_expected_beacons));
1279                if (!test_bit(S_SCANNING, &il->status))
1280                        il4965_init_sensitivity(il);
1281        }
1282}
1283
1284/* Calculate noise level, based on measurements during network silence just
1285 *   before arriving beacon.  This measurement can be done only if we know
1286 *   exactly when to expect beacons, therefore only when we're associated. */
1287static void
1288il4965_rx_calc_noise(struct il_priv *il)
1289{
1290        struct stats_rx_non_phy *rx_info;
1291        int num_active_rx = 0;
1292        int total_silence = 0;
1293        int bcn_silence_a, bcn_silence_b, bcn_silence_c;
1294        int last_rx_noise;
1295
1296        rx_info = &(il->_4965.stats.rx.general);
1297        bcn_silence_a =
1298            le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
1299        bcn_silence_b =
1300            le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
1301        bcn_silence_c =
1302            le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
1303
1304        if (bcn_silence_a) {
1305                total_silence += bcn_silence_a;
1306                num_active_rx++;
1307        }
1308        if (bcn_silence_b) {
1309                total_silence += bcn_silence_b;
1310                num_active_rx++;
1311        }
1312        if (bcn_silence_c) {
1313                total_silence += bcn_silence_c;
1314                num_active_rx++;
1315        }
1316
1317        /* Average among active antennas */
1318        if (num_active_rx)
1319                last_rx_noise = (total_silence / num_active_rx) - 107;
1320        else
1321                last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE;
1322
1323        D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a,
1324                bcn_silence_b, bcn_silence_c, last_rx_noise);
1325}
1326
1327#ifdef CONFIG_IWLEGACY_DEBUGFS
1328/*
1329 *  based on the assumption of all stats counter are in DWORD
1330 *  FIXME: This function is for debugging, do not deal with
1331 *  the case of counters roll-over.
1332 */
1333static void
1334il4965_accumulative_stats(struct il_priv *il, __le32 * stats)
1335{
1336        int i, size;
1337        __le32 *prev_stats;
1338        u32 *accum_stats;
1339        u32 *delta, *max_delta;
1340        struct stats_general_common *general, *accum_general;
1341        struct stats_tx *tx, *accum_tx;
1342
1343        prev_stats = (__le32 *) &il->_4965.stats;
1344        accum_stats = (u32 *) &il->_4965.accum_stats;
1345        size = sizeof(struct il_notif_stats);
1346        general = &il->_4965.stats.general.common;
1347        accum_general = &il->_4965.accum_stats.general.common;
1348        tx = &il->_4965.stats.tx;
1349        accum_tx = &il->_4965.accum_stats.tx;
1350        delta = (u32 *) &il->_4965.delta_stats;
1351        max_delta = (u32 *) &il->_4965.max_delta;
1352
1353        for (i = sizeof(__le32); i < size;
1354             i +=
1355             sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
1356             accum_stats++) {
1357                if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
1358                        *delta =
1359                            (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
1360                        *accum_stats += *delta;
1361                        if (*delta > *max_delta)
1362                                *max_delta = *delta;
1363                }
1364        }
1365
1366        /* reset accumulative stats for "no-counter" type stats */
1367        accum_general->temperature = general->temperature;
1368        accum_general->ttl_timestamp = general->ttl_timestamp;
1369}
1370#endif
1371
1372static void
1373il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
1374{
1375        const int recalib_seconds = 60;
1376        bool change;
1377        struct il_rx_pkt *pkt = rxb_addr(rxb);
1378
1379        D_RX("Statistics notification received (%d vs %d).\n",
1380             (int)sizeof(struct il_notif_stats),
1381             le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);
1382
1383        change =
1384            ((il->_4965.stats.general.common.temperature !=
1385              pkt->u.stats.general.common.temperature) ||
1386             ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) !=
1387              (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK)));
1388#ifdef CONFIG_IWLEGACY_DEBUGFS
1389        il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats);
1390#endif
1391
1392        /* TODO: reading some of stats is unneeded */
1393        memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats));
1394
1395        set_bit(S_STATS, &il->status);
1396
1397        /*
1398         * Reschedule the stats timer to occur in recalib_seconds to ensure
1399         * we get a thermal update even if the uCode doesn't give us one
1400         */
1401        mod_timer(&il->stats_periodic,
1402                  jiffies + msecs_to_jiffies(recalib_seconds * 1000));
1403
1404        if (unlikely(!test_bit(S_SCANNING, &il->status)) &&
1405            (pkt->hdr.cmd == N_STATS)) {
1406                il4965_rx_calc_noise(il);
1407                queue_work(il->workqueue, &il->run_time_calib_work);
1408        }
1409
1410        if (change)
1411                il4965_temperature_calib(il);
1412}
1413
1414static void
1415il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
1416{
1417        struct il_rx_pkt *pkt = rxb_addr(rxb);
1418
1419        if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) {
1420#ifdef CONFIG_IWLEGACY_DEBUGFS
1421                memset(&il->_4965.accum_stats, 0,
1422                       sizeof(struct il_notif_stats));
1423                memset(&il->_4965.delta_stats, 0,
1424                       sizeof(struct il_notif_stats));
1425                memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats));
1426#endif
1427                D_RX("Statistics have been cleared\n");
1428        }
1429        il4965_hdl_stats(il, rxb);
1430}
1431
1432
1433/*
1434 * mac80211 queues, ACs, hardware queues, FIFOs.
1435 *
1436 * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
1437 *
1438 * Mac80211 uses the following numbers, which we get as from it
1439 * by way of skb_get_queue_mapping(skb):
1440 *
1441 *     VO      0
1442 *     VI      1
1443 *     BE      2
1444 *     BK      3
1445 *
1446 *
1447 * Regular (not A-MPDU) frames are put into hardware queues corresponding
1448 * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
1449 * own queue per aggregation session (RA/TID combination), such queues are
1450 * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
1451 * order to map frames to the right queue, we also need an AC->hw queue
1452 * mapping. This is implemented here.
1453 *
1454 * Due to the way hw queues are set up (by the hw specific modules like
1455 * 4965.c), the AC->hw queue mapping is the identity
1456 * mapping.
1457 */
1458
1459static const u8 tid_to_ac[] = {
1460        IEEE80211_AC_BE,
1461        IEEE80211_AC_BK,
1462        IEEE80211_AC_BK,
1463        IEEE80211_AC_BE,
1464        IEEE80211_AC_VI,
1465        IEEE80211_AC_VI,
1466        IEEE80211_AC_VO,
1467        IEEE80211_AC_VO
1468};
1469
1470static inline int
1471il4965_get_ac_from_tid(u16 tid)
1472{
1473        if (likely(tid < ARRAY_SIZE(tid_to_ac)))
1474                return tid_to_ac[tid];
1475
1476        /* no support for TIDs 8-15 yet */
1477        return -EINVAL;
1478}
1479
1480static inline int
1481il4965_get_fifo_from_tid(u16 tid)
1482{
1483        const u8 ac_to_fifo[] = {
1484                IL_TX_FIFO_VO,
1485                IL_TX_FIFO_VI,
1486                IL_TX_FIFO_BE,
1487                IL_TX_FIFO_BK,
1488        };
1489
1490        if (likely(tid < ARRAY_SIZE(tid_to_ac)))
1491                return ac_to_fifo[tid_to_ac[tid]];
1492
1493        /* no support for TIDs 8-15 yet */
1494        return -EINVAL;
1495}
1496
1497/*
1498 * handle build C_TX command notification.
1499 */
1500static void
1501il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb,
1502                          struct il_tx_cmd *tx_cmd,
1503                          struct ieee80211_tx_info *info,
1504                          struct ieee80211_hdr *hdr, u8 std_id)
1505{
1506        __le16 fc = hdr->frame_control;
1507        __le32 tx_flags = tx_cmd->tx_flags;
1508
1509        tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
1510        if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
1511                tx_flags |= TX_CMD_FLG_ACK_MSK;
1512                if (ieee80211_is_mgmt(fc))
1513                        tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
1514                if (ieee80211_is_probe_resp(fc) &&
1515                    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
1516                        tx_flags |= TX_CMD_FLG_TSF_MSK;
1517        } else {
1518                tx_flags &= (~TX_CMD_FLG_ACK_MSK);
1519                tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
1520        }
1521
1522        if (ieee80211_is_back_req(fc))
1523                tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;
1524
1525        tx_cmd->sta_id = std_id;
1526        if (ieee80211_has_morefrags(fc))
1527                tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
1528
1529        if (ieee80211_is_data_qos(fc)) {
1530                u8 *qc = ieee80211_get_qos_ctl(hdr);
1531                tx_cmd->tid_tspec = qc[0] & 0xf;
1532                tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
1533        } else {
1534                tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
1535        }
1536
1537        il_tx_cmd_protection(il, info, fc, &tx_flags);
1538
1539        tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
1540        if (ieee80211_is_mgmt(fc)) {
1541                if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
1542                        tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
1543                else
1544                        tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
1545        } else {
1546                tx_cmd->timeout.pm_frame_timeout = 0;
1547        }
1548
1549        tx_cmd->driver_txop = 0;
1550        tx_cmd->tx_flags = tx_flags;
1551        tx_cmd->next_frame_len = 0;
1552}
1553
1554static void
1555il4965_tx_cmd_build_rate(struct il_priv *il,
1556                         struct il_tx_cmd *tx_cmd,
1557                         struct ieee80211_tx_info *info,
1558                         struct ieee80211_sta *sta,
1559                         __le16 fc)
1560{
1561        const u8 rts_retry_limit = 60;
1562        u32 rate_flags;
1563        int rate_idx;
1564        u8 data_retry_limit;
1565        u8 rate_plcp;
1566
1567        /* Set retry limit on DATA packets and Probe Responses */
1568        if (ieee80211_is_probe_resp(fc))
1569                data_retry_limit = 3;
1570        else
1571                data_retry_limit = IL4965_DEFAULT_TX_RETRY;
1572        tx_cmd->data_retry_limit = data_retry_limit;
1573        /* Set retry limit on RTS packets */
1574        tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);
1575
1576        /* DATA packets will use the uCode station table for rate/antenna
1577         * selection */
1578        if (ieee80211_is_data(fc)) {
1579                tx_cmd->initial_rate_idx = 0;
1580                tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
1581                return;
1582        }
1583
1584        /**
1585         * If the current TX rate stored in mac80211 has the MCS bit set, it's
1586         * not really a TX rate.  Thus, we use the lowest supported rate for
1587         * this band.  Also use the lowest supported rate if the stored rate
1588         * idx is invalid.
1589         */
1590        rate_idx = info->control.rates[0].idx;
1591        if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0
1592            || rate_idx > RATE_COUNT_LEGACY)
1593                rate_idx = rate_lowest_index(&il->bands[info->band], sta);
1594        /* For 5 GHZ band, remap mac80211 rate indices into driver indices */
1595        if (info->band == NL80211_BAND_5GHZ)
1596                rate_idx += IL_FIRST_OFDM_RATE;
1597        /* Get PLCP rate for tx_cmd->rate_n_flags */
1598        rate_plcp = il_rates[rate_idx].plcp;
1599        /* Zero out flags for this packet */
1600        rate_flags = 0;
1601
1602        /* Set CCK flag as needed */
1603        if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE)
1604                rate_flags |= RATE_MCS_CCK_MSK;
1605
1606        /* Set up antennas */
1607        il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
1608        rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;
1609
1610        /* Set the rate in the TX cmd */
1611        tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags);
1612}
1613
1614static void
1615il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
1616                             struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag,
1617                             int sta_id)
1618{
1619        struct ieee80211_key_conf *keyconf = info->control.hw_key;
1620
1621        switch (keyconf->cipher) {
1622        case WLAN_CIPHER_SUITE_CCMP:
1623                tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
1624                memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
1625                if (info->flags & IEEE80211_TX_CTL_AMPDU)
1626                        tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
1627                D_TX("tx_cmd with AES hwcrypto\n");
1628                break;
1629
1630        case WLAN_CIPHER_SUITE_TKIP:
1631                tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
1632                ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key);
1633                D_TX("tx_cmd with tkip hwcrypto\n");
1634                break;
1635
1636        case WLAN_CIPHER_SUITE_WEP104:
1637                tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
1638                /* fall through */
1639        case WLAN_CIPHER_SUITE_WEP40:
1640                tx_cmd->sec_ctl |=
1641                    (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) <<
1642                     TX_CMD_SEC_SHIFT);
1643
1644                memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
1645
1646                D_TX("Configuring packet for WEP encryption " "with key %d\n",
1647                     keyconf->keyidx);
1648                break;
1649
1650        default:
1651                IL_ERR("Unknown encode cipher %x\n", keyconf->cipher);
1652                break;
1653        }
1654}
1655
1656/*
1657 * start C_TX command process
1658 */
1659int
1660il4965_tx_skb(struct il_priv *il,
1661              struct ieee80211_sta *sta,
1662              struct sk_buff *skb)
1663{
1664        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
1665        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1666        struct il_station_priv *sta_priv = NULL;
1667        struct il_tx_queue *txq;
1668        struct il_queue *q;
1669        struct il_device_cmd *out_cmd;
1670        struct il_cmd_meta *out_meta;
1671        struct il_tx_cmd *tx_cmd;
1672        int txq_id;
1673        dma_addr_t phys_addr;
1674        dma_addr_t txcmd_phys;
1675        dma_addr_t scratch_phys;
1676        u16 len, firstlen, secondlen;
1677        u16 seq_number = 0;
1678        __le16 fc;
1679        u8 hdr_len;
1680        u8 sta_id;
1681        u8 wait_write_ptr = 0;
1682        u8 tid = 0;
1683        u8 *qc = NULL;
1684        unsigned long flags;
1685        bool is_agg = false;
1686
1687        spin_lock_irqsave(&il->lock, flags);
1688        if (il_is_rfkill(il)) {
1689                D_DROP("Dropping - RF KILL\n");
1690                goto drop_unlock;
1691        }
1692
1693        fc = hdr->frame_control;
1694
1695#ifdef CONFIG_IWLEGACY_DEBUG
1696        if (ieee80211_is_auth(fc))
1697                D_TX("Sending AUTH frame\n");
1698        else if (ieee80211_is_assoc_req(fc))
1699                D_TX("Sending ASSOC frame\n");
1700        else if (ieee80211_is_reassoc_req(fc))
1701                D_TX("Sending REASSOC frame\n");
1702#endif
1703
1704        hdr_len = ieee80211_hdrlen(fc);
1705
1706        /* For management frames use broadcast id to do not break aggregation */
1707        if (!ieee80211_is_data(fc))
1708                sta_id = il->hw_params.bcast_id;
1709        else {
1710                /* Find idx into station table for destination station */
1711                sta_id = il_sta_id_or_broadcast(il, sta);
1712
1713                if (sta_id == IL_INVALID_STATION) {
1714                        D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
1715                        goto drop_unlock;
1716                }
1717        }
1718
1719        D_TX("station Id %d\n", sta_id);
1720
1721        if (sta)
1722                sta_priv = (void *)sta->drv_priv;
1723
1724        if (sta_priv && sta_priv->asleep &&
1725            (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) {
1726                /*
1727                 * This sends an asynchronous command to the device,
1728                 * but we can rely on it being processed before the
1729                 * next frame is processed -- and the next frame to
1730                 * this station is the one that will consume this
1731                 * counter.
1732                 * For now set the counter to just 1 since we do not
1733                 * support uAPSD yet.
1734                 */
1735                il4965_sta_modify_sleep_tx_count(il, sta_id, 1);
1736        }
1737
1738        /* FIXME: remove me ? */
1739        WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM);
1740
1741        /* Access category (AC) is also the queue number */
1742        txq_id = skb_get_queue_mapping(skb);
1743
1744        /* irqs already disabled/saved above when locking il->lock */
1745        spin_lock(&il->sta_lock);
1746
1747        if (ieee80211_is_data_qos(fc)) {
1748                qc = ieee80211_get_qos_ctl(hdr);
1749                tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
1750                if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) {
1751                        spin_unlock(&il->sta_lock);
1752                        goto drop_unlock;
1753                }
1754                seq_number = il->stations[sta_id].tid[tid].seq_number;
1755                seq_number &= IEEE80211_SCTL_SEQ;
1756                hdr->seq_ctrl =
1757                    hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG);
1758                hdr->seq_ctrl |= cpu_to_le16(seq_number);
1759                seq_number += 0x10;
1760                /* aggregation is on for this <sta,tid> */
1761                if (info->flags & IEEE80211_TX_CTL_AMPDU &&
1762                    il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) {
1763                        txq_id = il->stations[sta_id].tid[tid].agg.txq_id;
1764                        is_agg = true;
1765                }
1766        }
1767
1768        txq = &il->txq[txq_id];
1769        q = &txq->q;
1770
1771        if (unlikely(il_queue_space(q) < q->high_mark)) {
1772                spin_unlock(&il->sta_lock);
1773                goto drop_unlock;
1774        }
1775
1776        if (ieee80211_is_data_qos(fc)) {
1777                il->stations[sta_id].tid[tid].tfds_in_queue++;
1778                if (!ieee80211_has_morefrags(fc))
1779                        il->stations[sta_id].tid[tid].seq_number = seq_number;
1780        }
1781
1782        spin_unlock(&il->sta_lock);
1783
1784        txq->skbs[q->write_ptr] = skb;
1785
1786        /* Set up first empty entry in queue's array of Tx/cmd buffers */
1787        out_cmd = txq->cmd[q->write_ptr];
1788        out_meta = &txq->meta[q->write_ptr];
1789        tx_cmd = &out_cmd->cmd.tx;
1790        memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
1791        memset(tx_cmd, 0, sizeof(struct il_tx_cmd));
1792
1793        /*
1794         * Set up the Tx-command (not MAC!) header.
1795         * Store the chosen Tx queue and TFD idx within the sequence field;
1796         * after Tx, uCode's Tx response will return this value so driver can
1797         * locate the frame within the tx queue and do post-tx processing.
1798         */
1799        out_cmd->hdr.cmd = C_TX;
1800        out_cmd->hdr.sequence =
1801            cpu_to_le16((u16)
1802                        (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
1803
1804        /* Copy MAC header from skb into command buffer */
1805        memcpy(tx_cmd->hdr, hdr, hdr_len);
1806
1807        /* Total # bytes to be transmitted */
1808        tx_cmd->len = cpu_to_le16((u16) skb->len);
1809
1810        if (info->control.hw_key)
1811                il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id);
1812
1813        /* TODO need this for burst mode later on */
1814        il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id);
1815
1816        il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc);
1817
1818        /*
1819         * Use the first empty entry in this queue's command buffer array
1820         * to contain the Tx command and MAC header concatenated together
1821         * (payload data will be in another buffer).
1822         * Size of this varies, due to varying MAC header length.
1823         * If end is not dword aligned, we'll have 2 extra bytes at the end
1824         * of the MAC header (device reads on dword boundaries).
1825         * We'll tell device about this padding later.
1826         */
1827        len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len;
1828        firstlen = (len + 3) & ~3;
1829
1830        /* Tell NIC about any 2-byte padding after MAC header */
1831        if (firstlen != len)
1832                tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
1833
1834        /* Physical address of this Tx command's header (not MAC header!),
1835         * within command buffer array. */
1836        txcmd_phys =
1837            pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
1838                           PCI_DMA_BIDIRECTIONAL);
1839        if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
1840                goto drop_unlock;
1841
1842        /* Set up TFD's 2nd entry to point directly to remainder of skb,
1843         * if any (802.11 null frames have no payload). */
1844        secondlen = skb->len - hdr_len;
1845        if (secondlen > 0) {
1846                phys_addr =
1847                    pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
1848                                   PCI_DMA_TODEVICE);
1849                if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
1850                        goto drop_unlock;
1851        }
1852
1853        /* Add buffer containing Tx command and MAC(!) header to TFD's
1854         * first entry */
1855        il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
1856        dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
1857        dma_unmap_len_set(out_meta, len, firstlen);
1858        if (secondlen)
1859                il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen,
1860                                               0, 0);
1861
1862        if (!ieee80211_has_morefrags(hdr->frame_control)) {
1863                txq->need_update = 1;
1864        } else {
1865                wait_write_ptr = 1;
1866                txq->need_update = 0;
1867        }
1868
1869        scratch_phys =
1870            txcmd_phys + sizeof(struct il_cmd_header) +
1871            offsetof(struct il_tx_cmd, scratch);
1872
1873        /* take back ownership of DMA buffer to enable update */
1874        pci_dma_sync_single_for_cpu(il->pci_dev, txcmd_phys, firstlen,
1875                                    PCI_DMA_BIDIRECTIONAL);
1876        tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
1877        tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys);
1878
1879        il_update_stats(il, true, fc, skb->len);
1880
1881        D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
1882        D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
1883        il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd));
1884        il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len);
1885
1886        /* Set up entry for this TFD in Tx byte-count array */
1887        if (info->flags & IEEE80211_TX_CTL_AMPDU)
1888                il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len));
1889
1890        pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys, firstlen,
1891                                       PCI_DMA_BIDIRECTIONAL);
1892
1893        /* Tell device the write idx *just past* this latest filled TFD */
1894        q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
1895        il_txq_update_write_ptr(il, txq);
1896        spin_unlock_irqrestore(&il->lock, flags);
1897
1898        /*
1899         * At this point the frame is "transmitted" successfully
1900         * and we will get a TX status notification eventually,
1901         * regardless of the value of ret. "ret" only indicates
1902         * whether or not we should update the write pointer.
1903         */
1904
1905        /*
1906         * Avoid atomic ops if it isn't an associated client.
1907         * Also, if this is a packet for aggregation, don't
1908         * increase the counter because the ucode will stop
1909         * aggregation queues when their respective station
1910         * goes to sleep.
1911         */
1912        if (sta_priv && sta_priv->client && !is_agg)
1913                atomic_inc(&sta_priv->pending_frames);
1914
1915        if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
1916                if (wait_write_ptr) {
1917                        spin_lock_irqsave(&il->lock, flags);
1918                        txq->need_update = 1;
1919                        il_txq_update_write_ptr(il, txq);
1920                        spin_unlock_irqrestore(&il->lock, flags);
1921                } else {
1922                        il_stop_queue(il, txq);
1923                }
1924        }
1925
1926        return 0;
1927
1928drop_unlock:
1929        spin_unlock_irqrestore(&il->lock, flags);
1930        return -1;
1931}
1932
1933static inline int
1934il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size)
1935{
1936        ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma,
1937                                       GFP_KERNEL);
1938        if (!ptr->addr)
1939                return -ENOMEM;
1940        ptr->size = size;
1941        return 0;
1942}
1943
1944static inline void
1945il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr)
1946{
1947        if (unlikely(!ptr->addr))
1948                return;
1949
1950        dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma);
1951        memset(ptr, 0, sizeof(*ptr));
1952}
1953
1954/**
1955 * il4965_hw_txq_ctx_free - Free TXQ Context
1956 *
1957 * Destroy all TX DMA queues and structures
1958 */
1959void
1960il4965_hw_txq_ctx_free(struct il_priv *il)
1961{
1962        int txq_id;
1963
1964        /* Tx queues */
1965        if (il->txq) {
1966                for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
1967                        if (txq_id == il->cmd_queue)
1968                                il_cmd_queue_free(il);
1969                        else
1970                                il_tx_queue_free(il, txq_id);
1971        }
1972        il4965_free_dma_ptr(il, &il->kw);
1973
1974        il4965_free_dma_ptr(il, &il->scd_bc_tbls);
1975
1976        /* free tx queue structure */
1977        il_free_txq_mem(il);
1978}
1979
1980/**
1981 * il4965_txq_ctx_alloc - allocate TX queue context
1982 * Allocate all Tx DMA structures and initialize them
1983 *
1984 * @param il
1985 * @return error code
1986 */
1987int
1988il4965_txq_ctx_alloc(struct il_priv *il)
1989{
1990        int ret, txq_id;
1991        unsigned long flags;
1992
1993        /* Free all tx/cmd queues and keep-warm buffer */
1994        il4965_hw_txq_ctx_free(il);
1995
1996        ret =
1997            il4965_alloc_dma_ptr(il, &il->scd_bc_tbls,
1998                                 il->hw_params.scd_bc_tbls_size);
1999        if (ret) {
2000                IL_ERR("Scheduler BC Table allocation failed\n");
2001                goto error_bc_tbls;
2002        }
2003        /* Alloc keep-warm buffer */
2004        ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE);
2005        if (ret) {
2006                IL_ERR("Keep Warm allocation failed\n");
2007                goto error_kw;
2008        }
2009
2010        /* allocate tx queue structure */
2011        ret = il_alloc_txq_mem(il);
2012        if (ret)
2013                goto error;
2014
2015        spin_lock_irqsave(&il->lock, flags);
2016
2017        /* Turn off all Tx DMA fifos */
2018        il4965_txq_set_sched(il, 0);
2019
2020        /* Tell NIC where to find the "keep warm" buffer */
2021        il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
2022
2023        spin_unlock_irqrestore(&il->lock, flags);
2024
2025        /* Alloc and init all Tx queues, including the command queue (#4/#9) */
2026        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
2027                ret = il_tx_queue_init(il, txq_id);
2028                if (ret) {
2029                        IL_ERR("Tx %d queue init failed\n", txq_id);
2030                        goto error;
2031                }
2032        }
2033
2034        return ret;
2035
2036error:
2037        il4965_hw_txq_ctx_free(il);
2038        il4965_free_dma_ptr(il, &il->kw);
2039error_kw:
2040        il4965_free_dma_ptr(il, &il->scd_bc_tbls);
2041error_bc_tbls:
2042        return ret;
2043}
2044
2045void
2046il4965_txq_ctx_reset(struct il_priv *il)
2047{
2048        int txq_id;
2049        unsigned long flags;
2050
2051        spin_lock_irqsave(&il->lock, flags);
2052
2053        /* Turn off all Tx DMA fifos */
2054        il4965_txq_set_sched(il, 0);
2055        /* Tell NIC where to find the "keep warm" buffer */
2056        il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
2057
2058        spin_unlock_irqrestore(&il->lock, flags);
2059
2060        /* Alloc and init all Tx queues, including the command queue (#4) */
2061        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
2062                il_tx_queue_reset(il, txq_id);
2063}
2064
2065static void
2066il4965_txq_ctx_unmap(struct il_priv *il)
2067{
2068        int txq_id;
2069
2070        if (!il->txq)
2071                return;
2072
2073        /* Unmap DMA from host system and free skb's */
2074        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
2075                if (txq_id == il->cmd_queue)
2076                        il_cmd_queue_unmap(il);
2077                else
2078                        il_tx_queue_unmap(il, txq_id);
2079}
2080
2081/**
2082 * il4965_txq_ctx_stop - Stop all Tx DMA channels
2083 */
2084void
2085il4965_txq_ctx_stop(struct il_priv *il)
2086{
2087        int ch, ret;
2088
2089        _il_wr_prph(il, IL49_SCD_TXFACT, 0);
2090
2091        /* Stop each Tx DMA channel, and wait for it to be idle */
2092        for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) {
2093                _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
2094                ret =
2095                    _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG,
2096                                 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
2097                                 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
2098                                 1000);
2099                if (ret < 0)
2100                        IL_ERR("Timeout stopping DMA channel %d [0x%08x]",
2101                               ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG));
2102        }
2103}
2104
2105/*
2106 * Find first available (lowest unused) Tx Queue, mark it "active".
2107 * Called only when finding queue for aggregation.
2108 * Should never return anything < 7, because they should already
2109 * be in use as EDCA AC (0-3), Command (4), reserved (5, 6)
2110 */
2111static int
2112il4965_txq_ctx_activate_free(struct il_priv *il)
2113{
2114        int txq_id;
2115
2116        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
2117                if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk))
2118                        return txq_id;
2119        return -1;
2120}
2121
2122/**
2123 * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
2124 */
2125static void
2126il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id)
2127{
2128        /* Simply stop the queue, but don't change any configuration;
2129         * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
2130        il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
2131                   (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
2132                   (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
2133}
2134
2135/**
2136 * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
2137 */
2138static int
2139il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id)
2140{
2141        u32 tbl_dw_addr;
2142        u32 tbl_dw;
2143        u16 scd_q2ratid;
2144
2145        scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
2146
2147        tbl_dw_addr =
2148            il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
2149
2150        tbl_dw = il_read_targ_mem(il, tbl_dw_addr);
2151
2152        if (txq_id & 0x1)
2153                tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
2154        else
2155                tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
2156
2157        il_write_targ_mem(il, tbl_dw_addr, tbl_dw);
2158
2159        return 0;
2160}
2161
2162/**
2163 * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
2164 *
2165 * NOTE:  txq_id must be greater than IL49_FIRST_AMPDU_QUEUE,
2166 *        i.e. it must be one of the higher queues used for aggregation
2167 */
2168static int
2169il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id,
2170                      int tid, u16 ssn_idx)
2171{
2172        unsigned long flags;
2173        u16 ra_tid;
2174        int ret;
2175
2176        if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
2177            (IL49_FIRST_AMPDU_QUEUE +
2178             il->cfg->num_of_ampdu_queues <= txq_id)) {
2179                IL_WARN("queue number out of range: %d, must be %d to %d\n",
2180                        txq_id, IL49_FIRST_AMPDU_QUEUE,
2181                        IL49_FIRST_AMPDU_QUEUE +
2182                        il->cfg->num_of_ampdu_queues - 1);
2183                return -EINVAL;
2184        }
2185
2186        ra_tid = BUILD_RAxTID(sta_id, tid);
2187
2188        /* Modify device's station table to Tx this TID */
2189        ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid);
2190        if (ret)
2191                return ret;
2192
2193        spin_lock_irqsave(&il->lock, flags);
2194
2195        /* Stop this Tx queue before configuring it */
2196        il4965_tx_queue_stop_scheduler(il, txq_id);
2197
2198        /* Map receiver-address / traffic-ID to this queue */
2199        il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id);
2200
2201        /* Set this queue as a chain-building queue */
2202        il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
2203
2204        /* Place first TFD at idx corresponding to start sequence number.
2205         * Assumes that ssn_idx is valid (!= 0xFFF) */
2206        il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
2207        il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
2208        il4965_set_wr_ptrs(il, txq_id, ssn_idx);
2209
2210        /* Set up Tx win size and frame limit for this queue */
2211        il_write_targ_mem(il,
2212                          il->scd_base_addr +
2213                          IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
2214                          (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS)
2215                          & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
2216
2217        il_write_targ_mem(il,
2218                          il->scd_base_addr +
2219                          IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
2220                          (SCD_FRAME_LIMIT <<
2221                           IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
2222                          IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
2223
2224        il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));
2225
2226        /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
2227        il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1);
2228
2229        spin_unlock_irqrestore(&il->lock, flags);
2230
2231        return 0;
2232}
2233
2234int
2235il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif,
2236                    struct ieee80211_sta *sta, u16 tid, u16 * ssn)
2237{
2238        int sta_id;
2239        int tx_fifo;
2240        int txq_id;
2241        int ret;
2242        unsigned long flags;
2243        struct il_tid_data *tid_data;
2244
2245        /* FIXME: warning if tx fifo not found ? */
2246        tx_fifo = il4965_get_fifo_from_tid(tid);
2247        if (unlikely(tx_fifo < 0))
2248                return tx_fifo;
2249
2250        D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid);
2251
2252        sta_id = il_sta_id(sta);
2253        if (sta_id == IL_INVALID_STATION) {
2254                IL_ERR("Start AGG on invalid station\n");
2255                return -ENXIO;
2256        }
2257        if (unlikely(tid >= MAX_TID_COUNT))
2258                return -EINVAL;
2259
2260        if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) {
2261                IL_ERR("Start AGG when state is not IL_AGG_OFF !\n");
2262                return -ENXIO;
2263        }
2264
2265        txq_id = il4965_txq_ctx_activate_free(il);
2266        if (txq_id == -1) {
2267                IL_ERR("No free aggregation queue available\n");
2268                return -ENXIO;
2269        }
2270
2271        spin_lock_irqsave(&il->sta_lock, flags);
2272        tid_data = &il->stations[sta_id].tid[tid];
2273        *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
2274        tid_data->agg.txq_id = txq_id;
2275        il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id);
2276        spin_unlock_irqrestore(&il->sta_lock, flags);
2277
2278        ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn);
2279        if (ret)
2280                return ret;
2281
2282        spin_lock_irqsave(&il->sta_lock, flags);
2283        tid_data = &il->stations[sta_id].tid[tid];
2284        if (tid_data->tfds_in_queue == 0) {
2285                D_HT("HW queue is empty\n");
2286                tid_data->agg.state = IL_AGG_ON;
2287                ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2288        } else {
2289                D_HT("HW queue is NOT empty: %d packets in HW queue\n",
2290                     tid_data->tfds_in_queue);
2291                tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA;
2292        }
2293        spin_unlock_irqrestore(&il->sta_lock, flags);
2294        return ret;
2295}
2296
2297/**
2298 * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE
2299 * il->lock must be held by the caller
2300 */
2301static int
2302il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo)
2303{
2304        if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
2305            (IL49_FIRST_AMPDU_QUEUE +
2306             il->cfg->num_of_ampdu_queues <= txq_id)) {
2307                IL_WARN("queue number out of range: %d, must be %d to %d\n",
2308                        txq_id, IL49_FIRST_AMPDU_QUEUE,
2309                        IL49_FIRST_AMPDU_QUEUE +
2310                        il->cfg->num_of_ampdu_queues - 1);
2311                return -EINVAL;
2312        }
2313
2314        il4965_tx_queue_stop_scheduler(il, txq_id);
2315
2316        il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
2317
2318        il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
2319        il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
2320        /* supposes that ssn_idx is valid (!= 0xFFF) */
2321        il4965_set_wr_ptrs(il, txq_id, ssn_idx);
2322
2323        il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));
2324        il_txq_ctx_deactivate(il, txq_id);
2325        il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0);
2326
2327        return 0;
2328}
2329
2330int
2331il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif,
2332                   struct ieee80211_sta *sta, u16 tid)
2333{
2334        int tx_fifo_id, txq_id, sta_id, ssn;
2335        struct il_tid_data *tid_data;
2336        int write_ptr, read_ptr;
2337        unsigned long flags;
2338
2339        /* FIXME: warning if tx_fifo_id not found ? */
2340        tx_fifo_id = il4965_get_fifo_from_tid(tid);
2341        if (unlikely(tx_fifo_id < 0))
2342                return tx_fifo_id;
2343
2344        sta_id = il_sta_id(sta);
2345
2346        if (sta_id == IL_INVALID_STATION) {
2347                IL_ERR("Invalid station for AGG tid %d\n", tid);
2348                return -ENXIO;
2349        }
2350
2351        spin_lock_irqsave(&il->sta_lock, flags);
2352
2353        tid_data = &il->stations[sta_id].tid[tid];
2354        ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
2355        txq_id = tid_data->agg.txq_id;
2356
2357        switch (il->stations[sta_id].tid[tid].agg.state) {
2358        case IL_EMPTYING_HW_QUEUE_ADDBA:
2359                /*
2360                 * This can happen if the peer stops aggregation
2361                 * again before we've had a chance to drain the
2362                 * queue we selected previously, i.e. before the
2363                 * session was really started completely.
2364                 */
2365                D_HT("AGG stop before setup done\n");
2366                goto turn_off;
2367        case IL_AGG_ON:
2368                break;
2369        default:
2370                IL_WARN("Stopping AGG while state not ON or starting\n");
2371        }
2372
2373        write_ptr = il->txq[txq_id].q.write_ptr;
2374        read_ptr = il->txq[txq_id].q.read_ptr;
2375
2376        /* The queue is not empty */
2377        if (write_ptr != read_ptr) {
2378                D_HT("Stopping a non empty AGG HW QUEUE\n");
2379                il->stations[sta_id].tid[tid].agg.state =
2380                    IL_EMPTYING_HW_QUEUE_DELBA;
2381                spin_unlock_irqrestore(&il->sta_lock, flags);
2382                return 0;
2383        }
2384
2385        D_HT("HW queue is empty\n");
2386turn_off:
2387        il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF;
2388
2389        /* do not restore/save irqs */
2390        spin_unlock(&il->sta_lock);
2391        spin_lock(&il->lock);
2392
2393        /*
2394         * the only reason this call can fail is queue number out of range,
2395         * which can happen if uCode is reloaded and all the station
2396         * information are lost. if it is outside the range, there is no need
2397         * to deactivate the uCode queue, just return "success" to allow
2398         *  mac80211 to clean up it own data.
2399         */
2400        il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id);
2401        spin_unlock_irqrestore(&il->lock, flags);
2402
2403        ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2404
2405        return 0;
2406}
2407
2408int
2409il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id)
2410{
2411        struct il_queue *q = &il->txq[txq_id].q;
2412        u8 *addr = il->stations[sta_id].sta.sta.addr;
2413        struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid];
2414
2415        lockdep_assert_held(&il->sta_lock);
2416
2417        switch (il->stations[sta_id].tid[tid].agg.state) {
2418        case IL_EMPTYING_HW_QUEUE_DELBA:
2419                /* We are reclaiming the last packet of the */
2420                /* aggregated HW queue */
2421                if (txq_id == tid_data->agg.txq_id &&
2422                    q->read_ptr == q->write_ptr) {
2423                        u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
2424                        int tx_fifo = il4965_get_fifo_from_tid(tid);
2425                        D_HT("HW queue empty: continue DELBA flow\n");
2426                        il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo);
2427                        tid_data->agg.state = IL_AGG_OFF;
2428                        ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid);
2429                }
2430                break;
2431        case IL_EMPTYING_HW_QUEUE_ADDBA:
2432                /* We are reclaiming the last packet of the queue */
2433                if (tid_data->tfds_in_queue == 0) {
2434                        D_HT("HW queue empty: continue ADDBA flow\n");
2435                        tid_data->agg.state = IL_AGG_ON;
2436                        ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid);
2437                }
2438                break;
2439        }
2440
2441        return 0;
2442}
2443
2444static void
2445il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1)
2446{
2447        struct ieee80211_sta *sta;
2448        struct il_station_priv *sta_priv;
2449
2450        rcu_read_lock();
2451        sta = ieee80211_find_sta(il->vif, addr1);
2452        if (sta) {
2453                sta_priv = (void *)sta->drv_priv;
2454                /* avoid atomic ops if this isn't a client */
2455                if (sta_priv->client &&
2456                    atomic_dec_return(&sta_priv->pending_frames) == 0)
2457                        ieee80211_sta_block_awake(il->hw, sta, false);
2458        }
2459        rcu_read_unlock();
2460}
2461
2462static void
2463il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg)
2464{
2465        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2466
2467        if (!is_agg)
2468                il4965_non_agg_tx_status(il, hdr->addr1);
2469
2470        ieee80211_tx_status_irqsafe(il->hw, skb);
2471}
2472
2473int
2474il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
2475{
2476        struct il_tx_queue *txq = &il->txq[txq_id];
2477        struct il_queue *q = &txq->q;
2478        int nfreed = 0;
2479        struct ieee80211_hdr *hdr;
2480        struct sk_buff *skb;
2481
2482        if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
2483                IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
2484                       "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd,
2485                       q->write_ptr, q->read_ptr);
2486                return 0;
2487        }
2488
2489        for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
2490             q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
2491
2492                skb = txq->skbs[txq->q.read_ptr];
2493
2494                if (WARN_ON_ONCE(skb == NULL))
2495                        continue;
2496
2497                hdr = (struct ieee80211_hdr *) skb->data;
2498                if (ieee80211_is_data_qos(hdr->frame_control))
2499                        nfreed++;
2500
2501                il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE);
2502
2503                txq->skbs[txq->q.read_ptr] = NULL;
2504                il->ops->txq_free_tfd(il, txq);
2505        }
2506        return nfreed;
2507}
2508
2509/**
2510 * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack
2511 *
2512 * Go through block-ack's bitmap of ACK'd frames, update driver's record of
2513 * ACK vs. not.  This gets sent to mac80211, then to rate scaling algo.
2514 */
2515static int
2516il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg,
2517                                     struct il_compressed_ba_resp *ba_resp)
2518{
2519        int i, sh, ack;
2520        u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
2521        u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
2522        int successes = 0;
2523        struct ieee80211_tx_info *info;
2524        u64 bitmap, sent_bitmap;
2525
2526        if (unlikely(!agg->wait_for_ba)) {
2527                if (unlikely(ba_resp->bitmap))
2528                        IL_ERR("Received BA when not expected\n");
2529                return -EINVAL;
2530        }
2531
2532        /* Mark that the expected block-ack response arrived */
2533        agg->wait_for_ba = 0;
2534        D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);
2535
2536        /* Calculate shift to align block-ack bits with our Tx win bits */
2537        sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4);
2538        if (sh < 0)             /* tbw something is wrong with indices */
2539                sh += 0x100;
2540
2541        if (agg->frame_count > (64 - sh)) {
2542                D_TX_REPLY("more frames than bitmap size");
2543                return -1;
2544        }
2545
2546        /* don't use 64-bit values for now */
2547        bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
2548
2549        /* check for success or failure according to the
2550         * transmitted bitmap and block-ack bitmap */
2551        sent_bitmap = bitmap & agg->bitmap;
2552
2553        /* For each frame attempted in aggregation,
2554         * update driver's record of tx frame's status. */
2555        i = 0;
2556        while (sent_bitmap) {
2557                ack = sent_bitmap & 1ULL;
2558                successes += ack;
2559                D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK",
2560                           i, (agg->start_idx + i) & 0xff, agg->start_idx + i);
2561                sent_bitmap >>= 1;
2562                ++i;
2563        }
2564
2565        D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap);
2566
2567        info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]);
2568        memset(&info->status, 0, sizeof(info->status));
2569        info->flags |= IEEE80211_TX_STAT_ACK;
2570        info->flags |= IEEE80211_TX_STAT_AMPDU;
2571        info->status.ampdu_ack_len = successes;
2572        info->status.ampdu_len = agg->frame_count;
2573        il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info);
2574
2575        return 0;
2576}
2577
2578static inline bool
2579il4965_is_tx_success(u32 status)
2580{
2581        status &= TX_STATUS_MSK;
2582        return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE);
2583}
2584
2585static u8
2586il4965_find_station(struct il_priv *il, const u8 *addr)
2587{
2588        int i;
2589        int start = 0;
2590        int ret = IL_INVALID_STATION;
2591        unsigned long flags;
2592
2593        if (il->iw_mode == NL80211_IFTYPE_ADHOC)
2594                start = IL_STA_ID;
2595
2596        if (is_broadcast_ether_addr(addr))
2597                return il->hw_params.bcast_id;
2598
2599        spin_lock_irqsave(&il->sta_lock, flags);
2600        for (i = start; i < il->hw_params.max_stations; i++)
2601                if (il->stations[i].used &&
2602                    ether_addr_equal(il->stations[i].sta.sta.addr, addr)) {
2603                        ret = i;
2604                        goto out;
2605                }
2606
2607        D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations);
2608
2609out:
2610        /*
2611         * It may be possible that more commands interacting with stations
2612         * arrive before we completed processing the adding of
2613         * station
2614         */
2615        if (ret != IL_INVALID_STATION &&
2616            (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) ||
2617             ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) &&
2618              (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) {
2619                IL_ERR("Requested station info for sta %d before ready.\n",
2620                       ret);
2621                ret = IL_INVALID_STATION;
2622        }
2623        spin_unlock_irqrestore(&il->sta_lock, flags);
2624        return ret;
2625}
2626
2627static int
2628il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr)
2629{
2630        if (il->iw_mode == NL80211_IFTYPE_STATION)
2631                return IL_AP_ID;
2632        else {
2633                u8 *da = ieee80211_get_DA(hdr);
2634
2635                return il4965_find_station(il, da);
2636        }
2637}
2638
2639static inline u32
2640il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp)
2641{
2642        return le32_to_cpup(&tx_resp->u.status +
2643                            tx_resp->frame_count) & IEEE80211_MAX_SN;
2644}
2645
2646static inline u32
2647il4965_tx_status_to_mac80211(u32 status)
2648{
2649        status &= TX_STATUS_MSK;
2650
2651        switch (status) {
2652        case TX_STATUS_SUCCESS:
2653        case TX_STATUS_DIRECT_DONE:
2654                return IEEE80211_TX_STAT_ACK;
2655        case TX_STATUS_FAIL_DEST_PS:
2656                return IEEE80211_TX_STAT_TX_FILTERED;
2657        default:
2658                return 0;
2659        }
2660}
2661
2662/**
2663 * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
2664 */
2665static int
2666il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg,
2667                          struct il4965_tx_resp *tx_resp, int txq_id,
2668                          u16 start_idx)
2669{
2670        u16 status;
2671        struct agg_tx_status *frame_status = tx_resp->u.agg_status;
2672        struct ieee80211_tx_info *info = NULL;
2673        struct ieee80211_hdr *hdr = NULL;
2674        u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
2675        int i, sh, idx;
2676        u16 seq;
2677        if (agg->wait_for_ba)
2678                D_TX_REPLY("got tx response w/o block-ack\n");
2679
2680        agg->frame_count = tx_resp->frame_count;
2681        agg->start_idx = start_idx;
2682        agg->rate_n_flags = rate_n_flags;
2683        agg->bitmap = 0;
2684
2685        /* num frames attempted by Tx command */
2686        if (agg->frame_count == 1) {
2687                /* Only one frame was attempted; no block-ack will arrive */
2688                status = le16_to_cpu(frame_status[0].status);
2689                idx = start_idx;
2690
2691                D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
2692                           agg->frame_count, agg->start_idx, idx);
2693
2694                info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]);
2695                info->status.rates[0].count = tx_resp->failure_frame + 1;
2696                info->flags &= ~IEEE80211_TX_CTL_AMPDU;
2697                info->flags |= il4965_tx_status_to_mac80211(status);
2698                il4965_hwrate_to_tx_control(il, rate_n_flags, info);
2699
2700                D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff,
2701                           tx_resp->failure_frame);
2702                D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
2703
2704                agg->wait_for_ba = 0;
2705        } else {
2706                /* Two or more frames were attempted; expect block-ack */
2707                u64 bitmap = 0;
2708                int start = agg->start_idx;
2709                struct sk_buff *skb;
2710
2711                /* Construct bit-map of pending frames within Tx win */
2712                for (i = 0; i < agg->frame_count; i++) {
2713                        u16 sc;
2714                        status = le16_to_cpu(frame_status[i].status);
2715                        seq = le16_to_cpu(frame_status[i].sequence);
2716                        idx = SEQ_TO_IDX(seq);
2717                        txq_id = SEQ_TO_QUEUE(seq);
2718
2719                        if (status &
2720                            (AGG_TX_STATE_FEW_BYTES_MSK |
2721                             AGG_TX_STATE_ABORT_MSK))
2722                                continue;
2723
2724                        D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
2725                                   agg->frame_count, txq_id, idx);
2726
2727                        skb = il->txq[txq_id].skbs[idx];
2728                        if (WARN_ON_ONCE(skb == NULL))
2729                                return -1;
2730                        hdr = (struct ieee80211_hdr *) skb->data;
2731
2732                        sc = le16_to_cpu(hdr->seq_ctrl);
2733                        if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) {
2734                                IL_ERR("BUG_ON idx doesn't match seq control"
2735                                       " idx=%d, seq_idx=%d, seq=%d\n", idx,
2736                                       IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl);
2737                                return -1;
2738                        }
2739
2740                        D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx,
2741                                   IEEE80211_SEQ_TO_SN(sc));
2742
2743                        sh = idx - start;
2744                        if (sh > 64) {
2745                                sh = (start - idx) + 0xff;
2746                                bitmap = bitmap << sh;
2747                                sh = 0;
2748                                start = idx;
2749                        } else if (sh < -64)
2750                                sh = 0xff - (start - idx);
2751                        else if (sh < 0) {
2752                                sh = start - idx;
2753                                start = idx;
2754                                bitmap = bitmap << sh;
2755                                sh = 0;
2756                        }
2757                        bitmap |= 1ULL << sh;
2758                        D_TX_REPLY("start=%d bitmap=0x%llx\n", start,
2759                                   (unsigned long long)bitmap);
2760                }
2761
2762                agg->bitmap = bitmap;
2763                agg->start_idx = start;
2764                D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
2765                           agg->frame_count, agg->start_idx,
2766                           (unsigned long long)agg->bitmap);
2767
2768                if (bitmap)
2769                        agg->wait_for_ba = 1;
2770        }
2771        return 0;
2772}
2773
2774/**
2775 * il4965_hdl_tx - Handle standard (non-aggregation) Tx response
2776 */
2777static void
2778il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
2779{
2780        struct il_rx_pkt *pkt = rxb_addr(rxb);
2781        u16 sequence = le16_to_cpu(pkt->hdr.sequence);
2782        int txq_id = SEQ_TO_QUEUE(sequence);
2783        int idx = SEQ_TO_IDX(sequence);
2784        struct il_tx_queue *txq = &il->txq[txq_id];
2785        struct sk_buff *skb;
2786        struct ieee80211_hdr *hdr;
2787        struct ieee80211_tx_info *info;
2788        struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
2789        u32 status = le32_to_cpu(tx_resp->u.status);
2790        int uninitialized_var(tid);
2791        int sta_id;
2792        int freed;
2793        u8 *qc = NULL;
2794        unsigned long flags;
2795
2796        if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
2797                IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
2798                       "is out of range [0-%d] %d %d\n", txq_id, idx,
2799                       txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
2800                return;
2801        }
2802
2803        txq->time_stamp = jiffies;
2804
2805        skb = txq->skbs[txq->q.read_ptr];
2806        info = IEEE80211_SKB_CB(skb);
2807        memset(&info->status, 0, sizeof(info->status));
2808
2809        hdr = (struct ieee80211_hdr *) skb->data;
2810        if (ieee80211_is_data_qos(hdr->frame_control)) {
2811                qc = ieee80211_get_qos_ctl(hdr);
2812                tid = qc[0] & 0xf;
2813        }
2814
2815        sta_id = il4965_get_ra_sta_id(il, hdr);
2816        if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) {
2817                IL_ERR("Station not known\n");
2818                return;
2819        }
2820
2821        /*
2822         * Firmware will not transmit frame on passive channel, if it not yet
2823         * received some valid frame on that channel. When this error happen
2824         * we have to wait until firmware will unblock itself i.e. when we
2825         * note received beacon or other frame. We unblock queues in
2826         * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
2827         */
2828        if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
2829            il->iw_mode == NL80211_IFTYPE_STATION) {
2830                il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
2831                D_INFO("Stopped queues - RX waiting on passive channel\n");
2832        }
2833
2834        spin_lock_irqsave(&il->sta_lock, flags);
2835        if (txq->sched_retry) {
2836                const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
2837                struct il_ht_agg *agg = NULL;
2838                WARN_ON(!qc);
2839
2840                agg = &il->stations[sta_id].tid[tid].agg;
2841
2842                il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);
2843
2844                /* check if BAR is needed */
2845                if (tx_resp->frame_count == 1 &&
2846                    !il4965_is_tx_success(status))
2847                        info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
2848
2849                if (txq->q.read_ptr != (scd_ssn & 0xff)) {
2850                        idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
2851                        D_TX_REPLY("Retry scheduler reclaim scd_ssn "
2852                                   "%d idx %d\n", scd_ssn, idx);
2853                        freed = il4965_tx_queue_reclaim(il, txq_id, idx);
2854                        if (qc)
2855                                il4965_free_tfds_in_queue(il, sta_id, tid,
2856                                                          freed);
2857
2858                        if (il->mac80211_registered &&
2859                            il_queue_space(&txq->q) > txq->q.low_mark &&
2860                            agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
2861                                il_wake_queue(il, txq);
2862                }
2863        } else {
2864                info->status.rates[0].count = tx_resp->failure_frame + 1;
2865                info->flags |= il4965_tx_status_to_mac80211(status);
2866                il4965_hwrate_to_tx_control(il,
2867                                            le32_to_cpu(tx_resp->rate_n_flags),
2868                                            info);
2869
2870                D_TX_REPLY("TXQ %d status %s (0x%08x) "
2871                           "rate_n_flags 0x%x retries %d\n", txq_id,
2872                           il4965_get_tx_fail_reason(status), status,
2873                           le32_to_cpu(tx_resp->rate_n_flags),
2874                           tx_resp->failure_frame);
2875
2876                freed = il4965_tx_queue_reclaim(il, txq_id, idx);
2877                if (qc && likely(sta_id != IL_INVALID_STATION))
2878                        il4965_free_tfds_in_queue(il, sta_id, tid, freed);
2879                else if (sta_id == IL_INVALID_STATION)
2880                        D_TX_REPLY("Station not known\n");
2881
2882                if (il->mac80211_registered &&
2883                    il_queue_space(&txq->q) > txq->q.low_mark)
2884                        il_wake_queue(il, txq);
2885        }
2886        if (qc && likely(sta_id != IL_INVALID_STATION))
2887                il4965_txq_check_empty(il, sta_id, tid, txq_id);
2888
2889        il4965_check_abort_status(il, tx_resp->frame_count, status);
2890
2891        spin_unlock_irqrestore(&il->sta_lock, flags);
2892}
2893
2894/**
2895 * translate ucode response to mac80211 tx status control values
2896 */
2897void
2898il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags,
2899                            struct ieee80211_tx_info *info)
2900{
2901        struct ieee80211_tx_rate *r = &info->status.rates[0];
2902
2903        info->status.antenna =
2904            ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
2905        if (rate_n_flags & RATE_MCS_HT_MSK)
2906                r->flags |= IEEE80211_TX_RC_MCS;
2907        if (rate_n_flags & RATE_MCS_GF_MSK)
2908                r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
2909        if (rate_n_flags & RATE_MCS_HT40_MSK)
2910                r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
2911        if (rate_n_flags & RATE_MCS_DUP_MSK)
2912                r->flags |= IEEE80211_TX_RC_DUP_DATA;
2913        if (rate_n_flags & RATE_MCS_SGI_MSK)
2914                r->flags |= IEEE80211_TX_RC_SHORT_GI;
2915        r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band);
2916}
2917
2918/**
2919 * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA
2920 *
2921 * Handles block-acknowledge notification from device, which reports success
2922 * of frames sent via aggregation.
2923 */
2924static void
2925il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb)
2926{
2927        struct il_rx_pkt *pkt = rxb_addr(rxb);
2928        struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
2929        struct il_tx_queue *txq = NULL;
2930        struct il_ht_agg *agg;
2931        int idx;
2932        int sta_id;
2933        int tid;
2934        unsigned long flags;
2935
2936        /* "flow" corresponds to Tx queue */
2937        u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
2938
2939        /* "ssn" is start of block-ack Tx win, corresponds to idx
2940         * (in Tx queue's circular buffer) of first TFD/frame in win */
2941        u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
2942
2943        if (scd_flow >= il->hw_params.max_txq_num) {
2944                IL_ERR("BUG_ON scd_flow is bigger than number of queues\n");
2945                return;
2946        }
2947
2948        txq = &il->txq[scd_flow];
2949        sta_id = ba_resp->sta_id;
2950        tid = ba_resp->tid;
2951        agg = &il->stations[sta_id].tid[tid].agg;
2952        if (unlikely(agg->txq_id != scd_flow)) {
2953                /*
2954                 * FIXME: this is a uCode bug which need to be addressed,
2955                 * log the information and return for now!
2956                 * since it is possible happen very often and in order
2957                 * not to fill the syslog, don't enable the logging by default
2958                 */
2959                D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n",
2960                           scd_flow, agg->txq_id);
2961                return;
2962        }
2963
2964        /* Find idx just before block-ack win */
2965        idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
2966
2967        spin_lock_irqsave(&il->sta_lock, flags);
2968
2969        D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n",
2970                   agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32,
2971                   ba_resp->sta_id);
2972        D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = "
2973                   "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl,
2974                   (unsigned long long)le64_to_cpu(ba_resp->bitmap),
2975                   ba_resp->scd_flow, ba_resp->scd_ssn);
2976        D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx,
2977                   (unsigned long long)agg->bitmap);
2978
2979        /* Update driver's record of ACK vs. not for each frame in win */
2980        il4965_tx_status_reply_compressed_ba(il, agg, ba_resp);
2981
2982        /* Release all TFDs before the SSN, i.e. all TFDs in front of
2983         * block-ack win (we assume that they've been successfully
2984         * transmitted ... if not, it's too late anyway). */
2985        if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
2986                /* calculate mac80211 ampdu sw queue to wake */
2987                int freed = il4965_tx_queue_reclaim(il, scd_flow, idx);
2988                il4965_free_tfds_in_queue(il, sta_id, tid, freed);
2989
2990                if (il_queue_space(&txq->q) > txq->q.low_mark &&
2991                    il->mac80211_registered &&
2992                    agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
2993                        il_wake_queue(il, txq);
2994
2995                il4965_txq_check_empty(il, sta_id, tid, scd_flow);
2996        }
2997
2998        spin_unlock_irqrestore(&il->sta_lock, flags);
2999}
3000
3001#ifdef CONFIG_IWLEGACY_DEBUG
3002const char *
3003il4965_get_tx_fail_reason(u32 status)
3004{
3005#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x
3006#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x
3007
3008        switch (status & TX_STATUS_MSK) {
3009        case TX_STATUS_SUCCESS:
3010                return "SUCCESS";
3011                TX_STATUS_POSTPONE(DELAY);
3012                TX_STATUS_POSTPONE(FEW_BYTES);
3013                TX_STATUS_POSTPONE(QUIET_PERIOD);
3014                TX_STATUS_POSTPONE(CALC_TTAK);
3015                TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY);
3016                TX_STATUS_FAIL(SHORT_LIMIT);
3017                TX_STATUS_FAIL(LONG_LIMIT);
3018                TX_STATUS_FAIL(FIFO_UNDERRUN);
3019                TX_STATUS_FAIL(DRAIN_FLOW);
3020                TX_STATUS_FAIL(RFKILL_FLUSH);
3021                TX_STATUS_FAIL(LIFE_EXPIRE);
3022                TX_STATUS_FAIL(DEST_PS);
3023                TX_STATUS_FAIL(HOST_ABORTED);
3024                TX_STATUS_FAIL(BT_RETRY);
3025                TX_STATUS_FAIL(STA_INVALID);
3026                TX_STATUS_FAIL(FRAG_DROPPED);
3027                TX_STATUS_FAIL(TID_DISABLE);
3028                TX_STATUS_FAIL(FIFO_FLUSHED);
3029                TX_STATUS_FAIL(INSUFFICIENT_CF_POLL);
3030                TX_STATUS_FAIL(PASSIVE_NO_RX);
3031                TX_STATUS_FAIL(NO_BEACON_ON_RADAR);
3032        }
3033
3034        return "UNKNOWN";
3035
3036#undef TX_STATUS_FAIL
3037#undef TX_STATUS_POSTPONE
3038}
3039#endif /* CONFIG_IWLEGACY_DEBUG */
3040
3041static struct il_link_quality_cmd *
3042il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id)
3043{
3044        int i, r;
3045        struct il_link_quality_cmd *link_cmd;
3046        u32 rate_flags = 0;
3047        __le32 rate_n_flags;
3048
3049        link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL);
3050        if (!link_cmd) {
3051                IL_ERR("Unable to allocate memory for LQ cmd.\n");
3052                return NULL;
3053        }
3054        /* Set up the rate scaling to start at selected rate, fall back
3055         * all the way down to 1M in IEEE order, and then spin on 1M */
3056        if (il->band == NL80211_BAND_5GHZ)
3057                r = RATE_6M_IDX;
3058        else
3059                r = RATE_1M_IDX;
3060
3061        if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE)
3062                rate_flags |= RATE_MCS_CCK_MSK;
3063
3064        rate_flags |=
3065            il4965_first_antenna(il->hw_params.
3066                                 valid_tx_ant) << RATE_MCS_ANT_POS;
3067        rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags);
3068        for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
3069                link_cmd->rs_table[i].rate_n_flags = rate_n_flags;
3070
3071        link_cmd->general_params.single_stream_ant_msk =
3072            il4965_first_antenna(il->hw_params.valid_tx_ant);
3073
3074        link_cmd->general_params.dual_stream_ant_msk =
3075            il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params.
3076                                                               valid_tx_ant);
3077        if (!link_cmd->general_params.dual_stream_ant_msk) {
3078                link_cmd->general_params.dual_stream_ant_msk = ANT_AB;
3079        } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) {
3080                link_cmd->general_params.dual_stream_ant_msk =
3081                    il->hw_params.valid_tx_ant;
3082        }
3083
3084        link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
3085        link_cmd->agg_params.agg_time_limit =
3086            cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
3087
3088        link_cmd->sta_id = sta_id;
3089
3090        return link_cmd;
3091}
3092
3093/*
3094 * il4965_add_bssid_station - Add the special IBSS BSSID station
3095 *
3096 * Function sleeps.
3097 */
3098int
3099il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r)
3100{
3101        int ret;
3102        u8 sta_id;
3103        struct il_link_quality_cmd *link_cmd;
3104        unsigned long flags;
3105
3106        if (sta_id_r)
3107                *sta_id_r = IL_INVALID_STATION;
3108
3109        ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
3110        if (ret) {
3111                IL_ERR("Unable to add station %pM\n", addr);
3112                return ret;
3113        }
3114
3115        if (sta_id_r)
3116                *sta_id_r = sta_id;
3117
3118        spin_lock_irqsave(&il->sta_lock, flags);
3119        il->stations[sta_id].used |= IL_STA_LOCAL;
3120        spin_unlock_irqrestore(&il->sta_lock, flags);
3121
3122        /* Set up default rate scaling table in device's station table */
3123        link_cmd = il4965_sta_alloc_lq(il, sta_id);
3124        if (!link_cmd) {
3125                IL_ERR("Unable to initialize rate scaling for station %pM.\n",
3126                       addr);
3127                return -ENOMEM;
3128        }
3129
3130        ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true);
3131        if (ret)
3132                IL_ERR("Link quality command failed (%d)\n", ret);
3133
3134        spin_lock_irqsave(&il->sta_lock, flags);
3135        il->stations[sta_id].lq = link_cmd;
3136        spin_unlock_irqrestore(&il->sta_lock, flags);
3137
3138        return 0;
3139}
3140
3141static int
3142il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty)
3143{
3144        int i;
3145        u8 buff[sizeof(struct il_wep_cmd) +
3146                sizeof(struct il_wep_key) * WEP_KEYS_MAX];
3147        struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff;
3148        size_t cmd_size = sizeof(struct il_wep_cmd);
3149        struct il_host_cmd cmd = {
3150                .id = C_WEPKEY,
3151                .data = wep_cmd,
3152                .flags = CMD_SYNC,
3153        };
3154        bool not_empty = false;
3155
3156        might_sleep();
3157
3158        memset(wep_cmd, 0,
3159               cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX));
3160
3161        for (i = 0; i < WEP_KEYS_MAX; i++) {
3162                u8 key_size = il->_4965.wep_keys[i].key_size;
3163
3164                wep_cmd->key[i].key_idx = i;
3165                if (key_size) {
3166                        wep_cmd->key[i].key_offset = i;
3167                        not_empty = true;
3168                } else
3169                        wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET;
3170
3171                wep_cmd->key[i].key_size = key_size;
3172                memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size);
3173        }
3174
3175        wep_cmd->global_key_type = WEP_KEY_WEP_TYPE;
3176        wep_cmd->num_keys = WEP_KEYS_MAX;
3177
3178        cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX;
3179        cmd.len = cmd_size;
3180
3181        if (not_empty || send_if_empty)
3182                return il_send_cmd(il, &cmd);
3183        else
3184                return 0;
3185}
3186
3187int
3188il4965_restore_default_wep_keys(struct il_priv *il)
3189{
3190        lockdep_assert_held(&il->mutex);
3191
3192        return il4965_static_wepkey_cmd(il, false);
3193}
3194
3195int
3196il4965_remove_default_wep_key(struct il_priv *il,
3197                              struct ieee80211_key_conf *keyconf)
3198{
3199        int ret;
3200        int idx = keyconf->keyidx;
3201
3202        lockdep_assert_held(&il->mutex);
3203
3204        D_WEP("Removing default WEP key: idx=%d\n", idx);
3205
3206        memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key));
3207        if (il_is_rfkill(il)) {
3208                D_WEP("Not sending C_WEPKEY command due to RFKILL.\n");
3209                /* but keys in device are clear anyway so return success */
3210                return 0;
3211        }
3212        ret = il4965_static_wepkey_cmd(il, 1);
3213        D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret);
3214
3215        return ret;
3216}
3217
3218int
3219il4965_set_default_wep_key(struct il_priv *il,
3220                           struct ieee80211_key_conf *keyconf)
3221{
3222        int ret;
3223        int len = keyconf->keylen;
3224        int idx = keyconf->keyidx;
3225
3226        lockdep_assert_held(&il->mutex);
3227
3228        if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) {
3229                D_WEP("Bad WEP key length %d\n", keyconf->keylen);
3230                return -EINVAL;
3231        }
3232
3233        keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
3234        keyconf->hw_key_idx = HW_KEY_DEFAULT;
3235        il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher;
3236
3237        il->_4965.wep_keys[idx].key_size = len;
3238        memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len);
3239
3240        ret = il4965_static_wepkey_cmd(il, false);
3241
3242        D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret);
3243        return ret;
3244}
3245
3246static int
3247il4965_set_wep_dynamic_key_info(struct il_priv *il,
3248                                struct ieee80211_key_conf *keyconf, u8 sta_id)
3249{
3250        unsigned long flags;
3251        __le16 key_flags = 0;
3252        struct il_addsta_cmd sta_cmd;
3253
3254        lockdep_assert_held(&il->mutex);
3255
3256        keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
3257
3258        key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK);
3259        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
3260        key_flags &= ~STA_KEY_FLG_INVALID;
3261
3262        if (keyconf->keylen == WEP_KEY_LEN_128)
3263                key_flags |= STA_KEY_FLG_KEY_SIZE_MSK;
3264
3265        if (sta_id == il->hw_params.bcast_id)
3266                key_flags |= STA_KEY_MULTICAST_MSK;
3267
3268        spin_lock_irqsave(&il->sta_lock, flags);
3269
3270        il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
3271        il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
3272        il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx;
3273
3274        memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
3275
3276        memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key,
3277               keyconf->keylen);
3278
3279        if ((il->stations[sta_id].sta.key.
3280             key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
3281                il->stations[sta_id].sta.key.key_offset =
3282                    il_get_free_ucode_key_idx(il);
3283        /* else, we are overriding an existing key => no need to allocated room
3284         * in uCode. */
3285
3286        WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
3287             "no space for a new key");
3288
3289        il->stations[sta_id].sta.key.key_flags = key_flags;
3290        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3291        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3292
3293        memcpy(&sta_cmd, &il->stations[sta_id].sta,
3294               sizeof(struct il_addsta_cmd));
3295        spin_unlock_irqrestore(&il->sta_lock, flags);
3296
3297        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3298}
3299
3300static int
3301il4965_set_ccmp_dynamic_key_info(struct il_priv *il,
3302                                 struct ieee80211_key_conf *keyconf, u8 sta_id)
3303{
3304        unsigned long flags;
3305        __le16 key_flags = 0;
3306        struct il_addsta_cmd sta_cmd;
3307
3308        lockdep_assert_held(&il->mutex);
3309
3310        key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
3311        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
3312        key_flags &= ~STA_KEY_FLG_INVALID;
3313
3314        if (sta_id == il->hw_params.bcast_id)
3315                key_flags |= STA_KEY_MULTICAST_MSK;
3316
3317        keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3318
3319        spin_lock_irqsave(&il->sta_lock, flags);
3320        il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
3321        il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
3322
3323        memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
3324
3325        memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
3326
3327        if ((il->stations[sta_id].sta.key.
3328             key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
3329                il->stations[sta_id].sta.key.key_offset =
3330                    il_get_free_ucode_key_idx(il);
3331        /* else, we are overriding an existing key => no need to allocated room
3332         * in uCode. */
3333
3334        WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
3335             "no space for a new key");
3336
3337        il->stations[sta_id].sta.key.key_flags = key_flags;
3338        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3339        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3340
3341        memcpy(&sta_cmd, &il->stations[sta_id].sta,
3342               sizeof(struct il_addsta_cmd));
3343        spin_unlock_irqrestore(&il->sta_lock, flags);
3344
3345        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3346}
3347
3348static int
3349il4965_set_tkip_dynamic_key_info(struct il_priv *il,
3350                                 struct ieee80211_key_conf *keyconf, u8 sta_id)
3351{
3352        unsigned long flags;
3353        int ret = 0;
3354        __le16 key_flags = 0;
3355
3356        key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
3357        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
3358        key_flags &= ~STA_KEY_FLG_INVALID;
3359
3360        if (sta_id == il->hw_params.bcast_id)
3361                key_flags |= STA_KEY_MULTICAST_MSK;
3362
3363        keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3364        keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
3365
3366        spin_lock_irqsave(&il->sta_lock, flags);
3367
3368        il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
3369        il->stations[sta_id].keyinfo.keylen = 16;
3370
3371        if ((il->stations[sta_id].sta.key.
3372             key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
3373                il->stations[sta_id].sta.key.key_offset =
3374                    il_get_free_ucode_key_idx(il);
3375        /* else, we are overriding an existing key => no need to allocated room
3376         * in uCode. */
3377
3378        WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
3379             "no space for a new key");
3380
3381        il->stations[sta_id].sta.key.key_flags = key_flags;
3382
3383        /* This copy is acutally not needed: we get the key with each TX */
3384        memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16);
3385
3386        memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16);
3387
3388        spin_unlock_irqrestore(&il->sta_lock, flags);
3389
3390        return ret;
3391}
3392
3393void
3394il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
3395                       struct ieee80211_sta *sta, u32 iv32, u16 *phase1key)
3396{
3397        u8 sta_id;
3398        unsigned long flags;
3399        int i;
3400
3401        if (il_scan_cancel(il)) {
3402                /* cancel scan failed, just live w/ bad key and rely
3403                   briefly on SW decryption */
3404                return;
3405        }
3406
3407        sta_id = il_sta_id_or_broadcast(il, sta);
3408        if (sta_id == IL_INVALID_STATION)
3409                return;
3410
3411        spin_lock_irqsave(&il->sta_lock, flags);
3412
3413        il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
3414
3415        for (i = 0; i < 5; i++)
3416                il->stations[sta_id].sta.key.tkip_rx_ttak[i] =
3417                    cpu_to_le16(phase1key[i]);
3418
3419        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3420        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3421
3422        il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
3423
3424        spin_unlock_irqrestore(&il->sta_lock, flags);
3425}
3426
3427int
3428il4965_remove_dynamic_key(struct il_priv *il,
3429                          struct ieee80211_key_conf *keyconf, u8 sta_id)
3430{
3431        unsigned long flags;
3432        u16 key_flags;
3433        u8 keyidx;
3434        struct il_addsta_cmd sta_cmd;
3435
3436        lockdep_assert_held(&il->mutex);
3437
3438        il->_4965.key_mapping_keys--;
3439
3440        spin_lock_irqsave(&il->sta_lock, flags);
3441        key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags);
3442        keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3;
3443
3444        D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id);
3445
3446        if (keyconf->keyidx != keyidx) {
3447                /* We need to remove a key with idx different that the one
3448                 * in the uCode. This means that the key we need to remove has
3449                 * been replaced by another one with different idx.
3450                 * Don't do anything and return ok
3451                 */
3452                spin_unlock_irqrestore(&il->sta_lock, flags);
3453                return 0;
3454        }
3455
3456        if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) {
3457                IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx,
3458                        key_flags);
3459                spin_unlock_irqrestore(&il->sta_lock, flags);
3460                return 0;
3461        }
3462
3463        if (!test_and_clear_bit
3464            (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table))
3465                IL_ERR("idx %d not used in uCode key table.\n",
3466                       il->stations[sta_id].sta.key.key_offset);
3467        memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
3468        memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
3469        il->stations[sta_id].sta.key.key_flags =
3470            STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
3471        il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx;
3472        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3473        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3474
3475        if (il_is_rfkill(il)) {
3476                D_WEP
3477                    ("Not sending C_ADD_STA command because RFKILL enabled.\n");
3478                spin_unlock_irqrestore(&il->sta_lock, flags);
3479                return 0;
3480        }
3481        memcpy(&sta_cmd, &il->stations[sta_id].sta,
3482               sizeof(struct il_addsta_cmd));
3483        spin_unlock_irqrestore(&il->sta_lock, flags);
3484
3485        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3486}
3487
3488int
3489il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
3490                       u8 sta_id)
3491{
3492        int ret;
3493
3494        lockdep_assert_held(&il->mutex);
3495
3496        il->_4965.key_mapping_keys++;
3497        keyconf->hw_key_idx = HW_KEY_DYNAMIC;
3498
3499        switch (keyconf->cipher) {
3500        case WLAN_CIPHER_SUITE_CCMP:
3501                ret =
3502                    il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
3503                break;
3504        case WLAN_CIPHER_SUITE_TKIP:
3505                ret =
3506                    il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id);
3507                break;
3508        case WLAN_CIPHER_SUITE_WEP40:
3509        case WLAN_CIPHER_SUITE_WEP104:
3510                ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id);
3511                break;
3512        default:
3513                IL_ERR("Unknown alg: %s cipher = %x\n", __func__,
3514                       keyconf->cipher);
3515                ret = -EINVAL;
3516        }
3517
3518        D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n",
3519              keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
3520
3521        return ret;
3522}
3523
3524/**
3525 * il4965_alloc_bcast_station - add broadcast station into driver's station table.
3526 *
3527 * This adds the broadcast station into the driver's station table
3528 * and marks it driver active, so that it will be restored to the
3529 * device at the next best time.
3530 */
3531int
3532il4965_alloc_bcast_station(struct il_priv *il)
3533{
3534        struct il_link_quality_cmd *link_cmd;
3535        unsigned long flags;
3536        u8 sta_id;
3537
3538        spin_lock_irqsave(&il->sta_lock, flags);
3539        sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
3540        if (sta_id == IL_INVALID_STATION) {
3541                IL_ERR("Unable to prepare broadcast station\n");
3542                spin_unlock_irqrestore(&il->sta_lock, flags);
3543
3544                return -EINVAL;
3545        }
3546
3547        il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
3548        il->stations[sta_id].used |= IL_STA_BCAST;
3549        spin_unlock_irqrestore(&il->sta_lock, flags);
3550
3551        link_cmd = il4965_sta_alloc_lq(il, sta_id);
3552        if (!link_cmd) {
3553                IL_ERR
3554                    ("Unable to initialize rate scaling for bcast station.\n");
3555                return -ENOMEM;
3556        }
3557
3558        spin_lock_irqsave(&il->sta_lock, flags);
3559        il->stations[sta_id].lq = link_cmd;
3560        spin_unlock_irqrestore(&il->sta_lock, flags);
3561
3562        return 0;
3563}
3564
3565/**
3566 * il4965_update_bcast_station - update broadcast station's LQ command
3567 *
3568 * Only used by iwl4965. Placed here to have all bcast station management
3569 * code together.
3570 */
3571static int
3572il4965_update_bcast_station(struct il_priv *il)
3573{
3574        unsigned long flags;
3575        struct il_link_quality_cmd *link_cmd;
3576        u8 sta_id = il->hw_params.bcast_id;
3577
3578        link_cmd = il4965_sta_alloc_lq(il, sta_id);
3579        if (!link_cmd) {
3580                IL_ERR("Unable to initialize rate scaling for bcast sta.\n");
3581                return -ENOMEM;
3582        }
3583
3584        spin_lock_irqsave(&il->sta_lock, flags);
3585        if (il->stations[sta_id].lq)
3586                kfree(il->stations[sta_id].lq);
3587        else
3588                D_INFO("Bcast sta rate scaling has not been initialized.\n");
3589        il->stations[sta_id].lq = link_cmd;
3590        spin_unlock_irqrestore(&il->sta_lock, flags);
3591
3592        return 0;
3593}
3594
3595int
3596il4965_update_bcast_stations(struct il_priv *il)
3597{
3598        return il4965_update_bcast_station(il);
3599}
3600
3601/**
3602 * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table
3603 */
3604int
3605il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid)
3606{
3607        unsigned long flags;
3608        struct il_addsta_cmd sta_cmd;
3609
3610        lockdep_assert_held(&il->mutex);
3611
3612        /* Remove "disable" flag, to enable Tx for this TID */
3613        spin_lock_irqsave(&il->sta_lock, flags);
3614        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX;
3615        il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid));
3616        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3617        memcpy(&sta_cmd, &il->stations[sta_id].sta,
3618               sizeof(struct il_addsta_cmd));
3619        spin_unlock_irqrestore(&il->sta_lock, flags);
3620
3621        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3622}
3623
3624int
3625il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid,
3626                        u16 ssn)
3627{
3628        unsigned long flags;
3629        int sta_id;
3630        struct il_addsta_cmd sta_cmd;
3631
3632        lockdep_assert_held(&il->mutex);
3633
3634        sta_id = il_sta_id(sta);
3635        if (sta_id == IL_INVALID_STATION)
3636                return -ENXIO;
3637
3638        spin_lock_irqsave(&il->sta_lock, flags);
3639        il->stations[sta_id].sta.station_flags_msk = 0;
3640        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK;
3641        il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid;
3642        il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn);
3643        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3644        memcpy(&sta_cmd, &il->stations[sta_id].sta,
3645               sizeof(struct il_addsta_cmd));
3646        spin_unlock_irqrestore(&il->sta_lock, flags);
3647
3648        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3649}
3650
3651int
3652il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid)
3653{
3654        unsigned long flags;
3655        int sta_id;
3656        struct il_addsta_cmd sta_cmd;
3657
3658        lockdep_assert_held(&il->mutex);
3659
3660        sta_id = il_sta_id(sta);
3661        if (sta_id == IL_INVALID_STATION) {
3662                IL_ERR("Invalid station for AGG tid %d\n", tid);
3663                return -ENXIO;
3664        }
3665
3666        spin_lock_irqsave(&il->sta_lock, flags);
3667        il->stations[sta_id].sta.station_flags_msk = 0;
3668        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK;
3669        il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid;
3670        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3671        memcpy(&sta_cmd, &il->stations[sta_id].sta,
3672               sizeof(struct il_addsta_cmd));
3673        spin_unlock_irqrestore(&il->sta_lock, flags);
3674
3675        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3676}
3677
3678void
3679il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt)
3680{
3681        unsigned long flags;
3682
3683        spin_lock_irqsave(&il->sta_lock, flags);
3684        il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK;
3685        il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
3686        il->stations[sta_id].sta.sta.modify_mask =
3687            STA_MODIFY_SLEEP_TX_COUNT_MSK;
3688        il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt);
3689        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3690        il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
3691        spin_unlock_irqrestore(&il->sta_lock, flags);
3692
3693}
3694
3695void
3696il4965_update_chain_flags(struct il_priv *il)
3697{
3698        if (il->ops->set_rxon_chain) {
3699                il->ops->set_rxon_chain(il);
3700                if (il->active.rx_chain != il->staging.rx_chain)
3701                        il_commit_rxon(il);
3702        }
3703}
3704
3705static void
3706il4965_clear_free_frames(struct il_priv *il)
3707{
3708        struct list_head *element;
3709
3710        D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
3711
3712        while (!list_empty(&il->free_frames)) {
3713                element = il->free_frames.next;
3714                list_del(element);
3715                kfree(list_entry(element, struct il_frame, list));
3716                il->frames_count--;
3717        }
3718
3719        if (il->frames_count) {
3720                IL_WARN("%d frames still in use.  Did we lose one?\n",
3721                        il->frames_count);
3722                il->frames_count = 0;
3723        }
3724}
3725
3726static struct il_frame *
3727il4965_get_free_frame(struct il_priv *il)
3728{
3729        struct il_frame *frame;
3730        struct list_head *element;
3731        if (list_empty(&il->free_frames)) {
3732                frame = kzalloc(sizeof(*frame), GFP_KERNEL);
3733                if (!frame) {
3734                        IL_ERR("Could not allocate frame!\n");
3735                        return NULL;
3736                }
3737
3738                il->frames_count++;
3739                return frame;
3740        }
3741
3742        element = il->free_frames.next;
3743        list_del(element);
3744        return list_entry(element, struct il_frame, list);
3745}
3746
3747static void
3748il4965_free_frame(struct il_priv *il, struct il_frame *frame)
3749{
3750        memset(frame, 0, sizeof(*frame));
3751        list_add(&frame->list, &il->free_frames);
3752}
3753
3754static u32
3755il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
3756                         int left)
3757{
3758        lockdep_assert_held(&il->mutex);
3759
3760        if (!il->beacon_skb)
3761                return 0;
3762
3763        if (il->beacon_skb->len > left)
3764                return 0;
3765
3766        memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
3767
3768        return il->beacon_skb->len;
3769}
3770
3771/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
3772static void
3773il4965_set_beacon_tim(struct il_priv *il,
3774                      struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon,
3775                      u32 frame_size)
3776{
3777        u16 tim_idx;
3778        struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
3779
3780        /*
3781         * The idx is relative to frame start but we start looking at the
3782         * variable-length part of the beacon.
3783         */
3784        tim_idx = mgmt->u.beacon.variable - beacon;
3785
3786        /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
3787        while ((tim_idx < (frame_size - 2)) &&
3788               (beacon[tim_idx] != WLAN_EID_TIM))
3789                tim_idx += beacon[tim_idx + 1] + 2;
3790
3791        /* If TIM field was found, set variables */
3792        if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
3793                tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
3794                tx_beacon_cmd->tim_size = beacon[tim_idx + 1];
3795        } else
3796                IL_WARN("Unable to find TIM Element in beacon\n");
3797}
3798
3799static unsigned int
3800il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame)
3801{
3802        struct il_tx_beacon_cmd *tx_beacon_cmd;
3803        u32 frame_size;
3804        u32 rate_flags;
3805        u32 rate;
3806        /*
3807         * We have to set up the TX command, the TX Beacon command, and the
3808         * beacon contents.
3809         */
3810
3811        lockdep_assert_held(&il->mutex);
3812
3813        if (!il->beacon_enabled) {
3814                IL_ERR("Trying to build beacon without beaconing enabled\n");
3815                return 0;
3816        }
3817
3818        /* Initialize memory */
3819        tx_beacon_cmd = &frame->u.beacon;
3820        memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
3821
3822        /* Set up TX beacon contents */
3823        frame_size =
3824            il4965_fill_beacon_frame(il, tx_beacon_cmd->frame,
3825                                     sizeof(frame->u) - sizeof(*tx_beacon_cmd));
3826        if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
3827                return 0;
3828        if (!frame_size)
3829                return 0;
3830
3831        /* Set up TX command fields */
3832        tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
3833        tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
3834        tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
3835        tx_beacon_cmd->tx.tx_flags =
3836            TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK |
3837            TX_CMD_FLG_STA_RATE_MSK;
3838
3839        /* Set up TX beacon command fields */
3840        il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame,
3841                              frame_size);
3842
3843        /* Set up packet rate and flags */
3844        rate = il_get_lowest_plcp(il);
3845        il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
3846        rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;
3847        if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE))
3848                rate_flags |= RATE_MCS_CCK_MSK;
3849        tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags);
3850
3851        return sizeof(*tx_beacon_cmd) + frame_size;
3852}
3853
3854int
3855il4965_send_beacon_cmd(struct il_priv *il)
3856{
3857        struct il_frame *frame;
3858        unsigned int frame_size;
3859        int rc;
3860
3861        frame = il4965_get_free_frame(il);
3862        if (!frame) {
3863                IL_ERR("Could not obtain free frame buffer for beacon "
3864                       "command.\n");
3865                return -ENOMEM;
3866        }
3867
3868        frame_size = il4965_hw_get_beacon_cmd(il, frame);
3869        if (!frame_size) {
3870                IL_ERR("Error configuring the beacon command\n");
3871                il4965_free_frame(il, frame);
3872                return -EINVAL;
3873        }
3874
3875        rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
3876
3877        il4965_free_frame(il, frame);
3878
3879        return rc;
3880}
3881
3882static inline dma_addr_t
3883il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx)
3884{
3885        struct il_tfd_tb *tb = &tfd->tbs[idx];
3886
3887        dma_addr_t addr = get_unaligned_le32(&tb->lo);
3888        if (sizeof(dma_addr_t) > sizeof(u32))
3889                addr |=
3890                    ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) <<
3891                    16;
3892
3893        return addr;
3894}
3895
3896static inline u16
3897il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx)
3898{
3899        struct il_tfd_tb *tb = &tfd->tbs[idx];
3900
3901        return le16_to_cpu(tb->hi_n_len) >> 4;
3902}
3903
3904static inline void
3905il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len)
3906{
3907        struct il_tfd_tb *tb = &tfd->tbs[idx];
3908        u16 hi_n_len = len << 4;
3909
3910        put_unaligned_le32(addr, &tb->lo);
3911        if (sizeof(dma_addr_t) > sizeof(u32))
3912                hi_n_len |= ((addr >> 16) >> 16) & 0xF;
3913
3914        tb->hi_n_len = cpu_to_le16(hi_n_len);
3915
3916        tfd->num_tbs = idx + 1;
3917}
3918
3919static inline u8
3920il4965_tfd_get_num_tbs(struct il_tfd *tfd)
3921{
3922        return tfd->num_tbs & 0x1f;
3923}
3924
3925/**
3926 * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
3927 * @il - driver ilate data
3928 * @txq - tx queue
3929 *
3930 * Does NOT advance any TFD circular buffer read/write idxes
3931 * Does NOT free the TFD itself (which is within circular buffer)
3932 */
3933void
3934il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
3935{
3936        struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds;
3937        struct il_tfd *tfd;
3938        struct pci_dev *dev = il->pci_dev;
3939        int idx = txq->q.read_ptr;
3940        int i;
3941        int num_tbs;
3942
3943        tfd = &tfd_tmp[idx];
3944
3945        /* Sanity check on number of chunks */
3946        num_tbs = il4965_tfd_get_num_tbs(tfd);
3947
3948        if (num_tbs >= IL_NUM_OF_TBS) {
3949                IL_ERR("Too many chunks: %i\n", num_tbs);
3950                /* @todo issue fatal error, it is quite serious situation */
3951                return;
3952        }
3953
3954        /* Unmap tx_cmd */
3955        if (num_tbs)
3956                pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping),
3957                                 dma_unmap_len(&txq->meta[idx], len),
3958                                 PCI_DMA_BIDIRECTIONAL);
3959
3960        /* Unmap chunks, if any. */
3961        for (i = 1; i < num_tbs; i++)
3962                pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i),
3963                                 il4965_tfd_tb_get_len(tfd, i),
3964                                 PCI_DMA_TODEVICE);
3965
3966        /* free SKB */
3967        if (txq->skbs) {
3968                struct sk_buff *skb = txq->skbs[txq->q.read_ptr];
3969
3970                /* can be called from irqs-disabled context */
3971                if (skb) {
3972                        dev_kfree_skb_any(skb);
3973                        txq->skbs[txq->q.read_ptr] = NULL;
3974                }
3975        }
3976}
3977
3978int
3979il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
3980                                dma_addr_t addr, u16 len, u8 reset, u8 pad)
3981{
3982        struct il_queue *q;
3983        struct il_tfd *tfd, *tfd_tmp;
3984        u32 num_tbs;
3985
3986        q = &txq->q;
3987        tfd_tmp = (struct il_tfd *)txq->tfds;
3988        tfd = &tfd_tmp[q->write_ptr];
3989
3990        if (reset)
3991                memset(tfd, 0, sizeof(*tfd));
3992
3993        num_tbs = il4965_tfd_get_num_tbs(tfd);
3994
3995        /* Each TFD can point to a maximum 20 Tx buffers */
3996        if (num_tbs >= IL_NUM_OF_TBS) {
3997                IL_ERR("Error can not send more than %d chunks\n",
3998                       IL_NUM_OF_TBS);
3999                return -EINVAL;
4000        }
4001
4002        BUG_ON(addr & ~DMA_BIT_MASK(36));
4003        if (unlikely(addr & ~IL_TX_DMA_MASK))
4004                IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr);
4005
4006        il4965_tfd_set_tb(tfd, num_tbs, addr, len);
4007
4008        return 0;
4009}
4010
4011/*
4012 * Tell nic where to find circular buffer of Tx Frame Descriptors for
4013 * given Tx queue, and enable the DMA channel used for that queue.
4014 *
4015 * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
4016 * channels supported in hardware.
4017 */
4018int
4019il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
4020{
4021        int txq_id = txq->q.id;
4022
4023        /* Circular buffer (TFD queue in DRAM) physical base address */
4024        il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8);
4025
4026        return 0;
4027}
4028
4029/******************************************************************************
4030 *
4031 * Generic RX handler implementations
4032 *
4033 ******************************************************************************/
4034static void
4035il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
4036{
4037        struct il_rx_pkt *pkt = rxb_addr(rxb);
4038        struct il_alive_resp *palive;
4039        struct delayed_work *pwork;
4040
4041        palive = &pkt->u.alive_frame;
4042
4043        D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
4044               palive->is_valid, palive->ver_type, palive->ver_subtype);
4045
4046        if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
4047                D_INFO("Initialization Alive received.\n");
4048                memcpy(&il->card_alive_init, &pkt->u.alive_frame,
4049                       sizeof(struct il_init_alive_resp));
4050                pwork = &il->init_alive_start;
4051        } else {
4052                D_INFO("Runtime Alive received.\n");
4053                memcpy(&il->card_alive, &pkt->u.alive_frame,
4054                       sizeof(struct il_alive_resp));
4055                pwork = &il->alive_start;
4056        }
4057
4058        /* We delay the ALIVE response by 5ms to
4059         * give the HW RF Kill time to activate... */
4060        if (palive->is_valid == UCODE_VALID_OK)
4061                queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
4062        else
4063                IL_WARN("uCode did not respond OK.\n");
4064}
4065
4066/**
4067 * il4965_bg_stats_periodic - Timer callback to queue stats
4068 *
4069 * This callback is provided in order to send a stats request.
4070 *
4071 * This timer function is continually reset to execute within
4072 * 60 seconds since the last N_STATS was received.  We need to
4073 * ensure we receive the stats in order to update the temperature
4074 * used for calibrating the TXPOWER.
4075 */
4076static void
4077il4965_bg_stats_periodic(unsigned long data)
4078{
4079        struct il_priv *il = (struct il_priv *)data;
4080
4081        if (test_bit(S_EXIT_PENDING, &il->status))
4082                return;
4083
4084        /* dont send host command if rf-kill is on */
4085        if (!il_is_ready_rf(il))
4086                return;
4087
4088        il_send_stats_request(il, CMD_ASYNC, false);
4089}
4090
4091static void
4092il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
4093{
4094        struct il_rx_pkt *pkt = rxb_addr(rxb);
4095        struct il4965_beacon_notif *beacon =
4096            (struct il4965_beacon_notif *)pkt->u.raw;
4097#ifdef CONFIG_IWLEGACY_DEBUG
4098        u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
4099
4100        D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n",
4101             le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
4102             beacon->beacon_notify_hdr.failure_frame,
4103             le32_to_cpu(beacon->ibss_mgr_status),
4104             le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
4105#endif
4106        il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
4107}
4108
4109static void
4110il4965_perform_ct_kill_task(struct il_priv *il)
4111{
4112        unsigned long flags;
4113
4114        D_POWER("Stop all queues\n");
4115
4116        if (il->mac80211_registered)
4117                ieee80211_stop_queues(il->hw);
4118
4119        _il_wr(il, CSR_UCODE_DRV_GP1_SET,
4120               CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
4121        _il_rd(il, CSR_UCODE_DRV_GP1);
4122
4123        spin_lock_irqsave(&il->reg_lock, flags);
4124        if (likely(_il_grab_nic_access(il)))
4125                _il_release_nic_access(il);
4126        spin_unlock_irqrestore(&il->reg_lock, flags);
4127}
4128
4129/* Handle notification from uCode that card's power state is changing
4130 * due to software, hardware, or critical temperature RFKILL */
4131static void
4132il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
4133{
4134        struct il_rx_pkt *pkt = rxb_addr(rxb);
4135        u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
4136        unsigned long status = il->status;
4137
4138        D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n",
4139                  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
4140                  (flags & SW_CARD_DISABLED) ? "Kill" : "On",
4141                  (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached");
4142
4143        if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) {
4144
4145                _il_wr(il, CSR_UCODE_DRV_GP1_SET,
4146                       CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
4147
4148                il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
4149
4150                if (!(flags & RXON_CARD_DISABLED)) {
4151                        _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
4152                               CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
4153                        il_wr(il, HBUS_TARG_MBX_C,
4154                              HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
4155                }
4156        }
4157
4158        if (flags & CT_CARD_DISABLED)
4159                il4965_perform_ct_kill_task(il);
4160
4161        if (flags & HW_CARD_DISABLED)
4162                set_bit(S_RFKILL, &il->status);
4163        else
4164                clear_bit(S_RFKILL, &il->status);
4165
4166        if (!(flags & RXON_CARD_DISABLED))
4167                il_scan_cancel(il);
4168
4169        if ((test_bit(S_RFKILL, &status) !=
4170             test_bit(S_RFKILL, &il->status)))
4171                wiphy_rfkill_set_hw_state(il->hw->wiphy,
4172                                          test_bit(S_RFKILL, &il->status));
4173        else
4174                wake_up(&il->wait_command_queue);
4175}
4176
4177/**
4178 * il4965_setup_handlers - Initialize Rx handler callbacks
4179 *
4180 * Setup the RX handlers for each of the reply types sent from the uCode
4181 * to the host.
4182 *
4183 * This function chains into the hardware specific files for them to setup
4184 * any hardware specific handlers as well.
4185 */
4186static void
4187il4965_setup_handlers(struct il_priv *il)
4188{
4189        il->handlers[N_ALIVE] = il4965_hdl_alive;
4190        il->handlers[N_ERROR] = il_hdl_error;
4191        il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
4192        il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
4193        il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
4194        il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
4195        il->handlers[N_BEACON] = il4965_hdl_beacon;
4196
4197        /*
4198         * The same handler is used for both the REPLY to a discrete
4199         * stats request from the host as well as for the periodic
4200         * stats notifications (after received beacons) from the uCode.
4201         */
4202        il->handlers[C_STATS] = il4965_hdl_c_stats;
4203        il->handlers[N_STATS] = il4965_hdl_stats;
4204
4205        il_setup_rx_scan_handlers(il);
4206
4207        /* status change handler */
4208        il->handlers[N_CARD_STATE] = il4965_hdl_card_state;
4209
4210        il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon;
4211        /* Rx handlers */
4212        il->handlers[N_RX_PHY] = il4965_hdl_rx_phy;
4213        il->handlers[N_RX_MPDU] = il4965_hdl_rx;
4214        il->handlers[N_RX] = il4965_hdl_rx;
4215        /* block ack */
4216        il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba;
4217        /* Tx response */
4218        il->handlers[C_TX] = il4965_hdl_tx;
4219}
4220
4221/**
4222 * il4965_rx_handle - Main entry function for receiving responses from uCode
4223 *
4224 * Uses the il->handlers callback function array to invoke
4225 * the appropriate handlers, including command responses,
4226 * frame-received notifications, and other notifications.
4227 */
4228void
4229il4965_rx_handle(struct il_priv *il)
4230{
4231        struct il_rx_buf *rxb;
4232        struct il_rx_pkt *pkt;
4233        struct il_rx_queue *rxq = &il->rxq;
4234        u32 r, i;
4235        int reclaim;
4236        unsigned long flags;
4237        u8 fill_rx = 0;
4238        u32 count = 8;
4239        int total_empty;
4240
4241        /* uCode's read idx (stored in shared DRAM) indicates the last Rx
4242         * buffer that the driver may process (last buffer filled by ucode). */
4243        r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
4244        i = rxq->read;
4245
4246        /* Rx interrupt, but nothing sent from uCode */
4247        if (i == r)
4248                D_RX("r = %d, i = %d\n", r, i);
4249
4250        /* calculate total frames need to be restock after handling RX */
4251        total_empty = r - rxq->write_actual;
4252        if (total_empty < 0)
4253                total_empty += RX_QUEUE_SIZE;
4254
4255        if (total_empty > (RX_QUEUE_SIZE / 2))
4256                fill_rx = 1;
4257
4258        while (i != r) {
4259                int len;
4260
4261                rxb = rxq->queue[i];
4262
4263                /* If an RXB doesn't have a Rx queue slot associated with it,
4264                 * then a bug has been introduced in the queue refilling
4265                 * routines -- catch it here */
4266                BUG_ON(rxb == NULL);
4267
4268                rxq->queue[i] = NULL;
4269
4270                pci_unmap_page(il->pci_dev, rxb->page_dma,
4271                               PAGE_SIZE << il->hw_params.rx_page_order,
4272                               PCI_DMA_FROMDEVICE);
4273                pkt = rxb_addr(rxb);
4274
4275                len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
4276                len += sizeof(u32);     /* account for status word */
4277
4278                reclaim = il_need_reclaim(il, pkt);
4279
4280                /* Based on type of command response or notification,
4281                 *   handle those that need handling via function in
4282                 *   handlers table.  See il4965_setup_handlers() */
4283                if (il->handlers[pkt->hdr.cmd]) {
4284                        D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
4285                             il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
4286                        il->isr_stats.handlers[pkt->hdr.cmd]++;
4287                        il->handlers[pkt->hdr.cmd] (il, rxb);
4288                } else {
4289                        /* No handling needed */
4290                        D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
4291                             i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
4292                }
4293
4294                /*
4295                 * XXX: After here, we should always check rxb->page
4296                 * against NULL before touching it or its virtual
4297                 * memory (pkt). Because some handler might have
4298                 * already taken or freed the pages.
4299                 */
4300
4301                if (reclaim) {
4302                        /* Invoke any callbacks, transfer the buffer to caller,
4303                         * and fire off the (possibly) blocking il_send_cmd()
4304                         * as we reclaim the driver command queue */
4305                        if (rxb->page)
4306                                il_tx_cmd_complete(il, rxb);
4307                        else
4308                                IL_WARN("Claim null rxb?\n");
4309                }
4310
4311                /* Reuse the page if possible. For notification packets and
4312                 * SKBs that fail to Rx correctly, add them back into the
4313                 * rx_free list for reuse later. */
4314                spin_lock_irqsave(&rxq->lock, flags);
4315                if (rxb->page != NULL) {
4316                        rxb->page_dma =
4317                            pci_map_page(il->pci_dev, rxb->page, 0,
4318                                         PAGE_SIZE << il->hw_params.
4319                                         rx_page_order, PCI_DMA_FROMDEVICE);
4320
4321                        if (unlikely(pci_dma_mapping_error(il->pci_dev,
4322                                                           rxb->page_dma))) {
4323                                __il_free_pages(il, rxb->page);
4324                                rxb->page = NULL;
4325                                list_add_tail(&rxb->list, &rxq->rx_used);
4326                        } else {
4327                                list_add_tail(&rxb->list, &rxq->rx_free);
4328                                rxq->free_count++;
4329                        }
4330                } else
4331                        list_add_tail(&rxb->list, &rxq->rx_used);
4332
4333                spin_unlock_irqrestore(&rxq->lock, flags);
4334
4335                i = (i + 1) & RX_QUEUE_MASK;
4336                /* If there are a lot of unused frames,
4337                 * restock the Rx queue so ucode wont assert. */
4338                if (fill_rx) {
4339                        count++;
4340                        if (count >= 8) {
4341                                rxq->read = i;
4342                                il4965_rx_replenish_now(il);
4343                                count = 0;
4344                        }
4345                }
4346        }
4347
4348        /* Backtrack one entry */
4349        rxq->read = i;
4350        if (fill_rx)
4351                il4965_rx_replenish_now(il);
4352        else
4353                il4965_rx_queue_restock(il);
4354}
4355
4356/* call this function to flush any scheduled tasklet */
4357static inline void
4358il4965_synchronize_irq(struct il_priv *il)
4359{
4360        /* wait to make sure we flush pending tasklet */
4361        synchronize_irq(il->pci_dev->irq);
4362        tasklet_kill(&il->irq_tasklet);
4363}
4364
4365static void
4366il4965_irq_tasklet(struct il_priv *il)
4367{
4368        u32 inta, handled = 0;
4369        u32 inta_fh;
4370        unsigned long flags;
4371        u32 i;
4372#ifdef CONFIG_IWLEGACY_DEBUG
4373        u32 inta_mask;
4374#endif
4375
4376        spin_lock_irqsave(&il->lock, flags);
4377
4378        /* Ack/clear/reset pending uCode interrupts.
4379         * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
4380         *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
4381        inta = _il_rd(il, CSR_INT);
4382        _il_wr(il, CSR_INT, inta);
4383
4384        /* Ack/clear/reset pending flow-handler (DMA) interrupts.
4385         * Any new interrupts that happen after this, either while we're
4386         * in this tasklet, or later, will show up in next ISR/tasklet. */
4387        inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
4388        _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
4389
4390#ifdef CONFIG_IWLEGACY_DEBUG
4391        if (il_get_debug_level(il) & IL_DL_ISR) {
4392                /* just for debug */
4393                inta_mask = _il_rd(il, CSR_INT_MASK);
4394                D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
4395                      inta_mask, inta_fh);
4396        }
4397#endif
4398
4399        spin_unlock_irqrestore(&il->lock, flags);
4400
4401        /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
4402         * atomic, make sure that inta covers all the interrupts that
4403         * we've discovered, even if FH interrupt came in just after
4404         * reading CSR_INT. */
4405        if (inta_fh & CSR49_FH_INT_RX_MASK)
4406                inta |= CSR_INT_BIT_FH_RX;
4407        if (inta_fh & CSR49_FH_INT_TX_MASK)
4408                inta |= CSR_INT_BIT_FH_TX;
4409
4410        /* Now service all interrupt bits discovered above. */
4411        if (inta & CSR_INT_BIT_HW_ERR) {
4412                IL_ERR("Hardware error detected.  Restarting.\n");
4413
4414                /* Tell the device to stop sending interrupts */
4415                il_disable_interrupts(il);
4416
4417                il->isr_stats.hw++;
4418                il_irq_handle_error(il);
4419
4420                handled |= CSR_INT_BIT_HW_ERR;
4421
4422                return;
4423        }
4424#ifdef CONFIG_IWLEGACY_DEBUG
4425        if (il_get_debug_level(il) & (IL_DL_ISR)) {
4426                /* NIC fires this, but we don't use it, redundant with WAKEUP */
4427                if (inta & CSR_INT_BIT_SCD) {
4428                        D_ISR("Scheduler finished to transmit "
4429                              "the frame/frames.\n");
4430                        il->isr_stats.sch++;
4431                }
4432
4433                /* Alive notification via Rx interrupt will do the real work */
4434                if (inta & CSR_INT_BIT_ALIVE) {
4435                        D_ISR("Alive interrupt\n");
4436                        il->isr_stats.alive++;
4437                }
4438        }
4439#endif
4440        /* Safely ignore these bits for debug checks below */
4441        inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
4442
4443        /* HW RF KILL switch toggled */
4444        if (inta & CSR_INT_BIT_RF_KILL) {
4445                int hw_rf_kill = 0;
4446
4447                if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
4448                        hw_rf_kill = 1;
4449
4450                IL_WARN("RF_KILL bit toggled to %s.\n",
4451                        hw_rf_kill ? "disable radio" : "enable radio");
4452
4453                il->isr_stats.rfkill++;
4454
4455                /* driver only loads ucode once setting the interface up.
4456                 * the driver allows loading the ucode even if the radio
4457                 * is killed. Hence update the killswitch state here. The
4458                 * rfkill handler will care about restarting if needed.
4459                 */
4460                if (hw_rf_kill) {
4461                        set_bit(S_RFKILL, &il->status);
4462                } else {
4463                        clear_bit(S_RFKILL, &il->status);
4464                        il_force_reset(il, true);
4465                }
4466                wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
4467
4468                handled |= CSR_INT_BIT_RF_KILL;
4469        }
4470
4471        /* Chip got too hot and stopped itself */
4472        if (inta & CSR_INT_BIT_CT_KILL) {
4473                IL_ERR("Microcode CT kill error detected.\n");
4474                il->isr_stats.ctkill++;
4475                handled |= CSR_INT_BIT_CT_KILL;
4476        }
4477
4478        /* Error detected by uCode */
4479        if (inta & CSR_INT_BIT_SW_ERR) {
4480                IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n",
4481                       inta);
4482                il->isr_stats.sw++;
4483                il_irq_handle_error(il);
4484                handled |= CSR_INT_BIT_SW_ERR;
4485        }
4486
4487        /*
4488         * uCode wakes up after power-down sleep.
4489         * Tell device about any new tx or host commands enqueued,
4490         * and about any Rx buffers made available while asleep.
4491         */
4492        if (inta & CSR_INT_BIT_WAKEUP) {
4493                D_ISR("Wakeup interrupt\n");
4494                il_rx_queue_update_write_ptr(il, &il->rxq);
4495                for (i = 0; i < il->hw_params.max_txq_num; i++)
4496                        il_txq_update_write_ptr(il, &il->txq[i]);
4497                il->isr_stats.wakeup++;
4498                handled |= CSR_INT_BIT_WAKEUP;
4499        }
4500
4501        /* All uCode command responses, including Tx command responses,
4502         * Rx "responses" (frame-received notification), and other
4503         * notifications from uCode come through here*/
4504        if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
4505                il4965_rx_handle(il);
4506                il->isr_stats.rx++;
4507                handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
4508        }
4509
4510        /* This "Tx" DMA channel is used only for loading uCode */
4511        if (inta & CSR_INT_BIT_FH_TX) {
4512                D_ISR("uCode load interrupt\n");
4513                il->isr_stats.tx++;
4514                handled |= CSR_INT_BIT_FH_TX;
4515                /* Wake up uCode load routine, now that load is complete */
4516                il->ucode_write_complete = 1;
4517                wake_up(&il->wait_command_queue);
4518        }
4519
4520        if (inta & ~handled) {
4521                IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
4522                il->isr_stats.unhandled++;
4523        }
4524
4525        if (inta & ~(il->inta_mask)) {
4526                IL_WARN("Disabled INTA bits 0x%08x were pending\n",
4527                        inta & ~il->inta_mask);
4528                IL_WARN("   with FH49_INT = 0x%08x\n", inta_fh);
4529        }
4530
4531        /* Re-enable all interrupts */
4532        /* only Re-enable if disabled by irq */
4533        if (test_bit(S_INT_ENABLED, &il->status))
4534                il_enable_interrupts(il);
4535        /* Re-enable RF_KILL if it occurred */
4536        else if (handled & CSR_INT_BIT_RF_KILL)
4537                il_enable_rfkill_int(il);
4538
4539#ifdef CONFIG_IWLEGACY_DEBUG
4540        if (il_get_debug_level(il) & (IL_DL_ISR)) {
4541                inta = _il_rd(il, CSR_INT);
4542                inta_mask = _il_rd(il, CSR_INT_MASK);
4543                inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
4544                D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
4545                      "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
4546        }
4547#endif
4548}
4549
4550/*****************************************************************************
4551 *
4552 * sysfs attributes
4553 *
4554 *****************************************************************************/
4555
4556#ifdef CONFIG_IWLEGACY_DEBUG
4557
4558/*
4559 * The following adds a new attribute to the sysfs representation
4560 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
4561 * used for controlling the debug level.
4562 *
4563 * See the level definitions in iwl for details.
4564 *
4565 * The debug_level being managed using sysfs below is a per device debug
4566 * level that is used instead of the global debug level if it (the per
4567 * device debug level) is set.
4568 */
4569static ssize_t
4570il4965_show_debug_level(struct device *d, struct device_attribute *attr,
4571                        char *buf)
4572{
4573        struct il_priv *il = dev_get_drvdata(d);
4574        return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
4575}
4576
4577static ssize_t
4578il4965_store_debug_level(struct device *d, struct device_attribute *attr,
4579                         const char *buf, size_t count)
4580{
4581        struct il_priv *il = dev_get_drvdata(d);
4582        unsigned long val;
4583        int ret;
4584
4585        ret = kstrtoul(buf, 0, &val);
4586        if (ret)
4587                IL_ERR("%s is not in hex or decimal form.\n", buf);
4588        else
4589                il->debug_level = val;
4590
4591        return strnlen(buf, count);
4592}
4593
4594static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il4965_show_debug_level,
4595                   il4965_store_debug_level);
4596
4597#endif /* CONFIG_IWLEGACY_DEBUG */
4598
4599static ssize_t
4600il4965_show_temperature(struct device *d, struct device_attribute *attr,
4601                        char *buf)
4602{
4603        struct il_priv *il = dev_get_drvdata(d);
4604
4605        if (!il_is_alive(il))
4606                return -EAGAIN;
4607
4608        return sprintf(buf, "%d\n", il->temperature);
4609}
4610
4611static DEVICE_ATTR(temperature, S_IRUGO, il4965_show_temperature, NULL);
4612
4613static ssize_t
4614il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
4615{
4616        struct il_priv *il = dev_get_drvdata(d);
4617
4618        if (!il_is_ready_rf(il))
4619                return sprintf(buf, "off\n");
4620        else
4621                return sprintf(buf, "%d\n", il->tx_power_user_lmt);
4622}
4623
4624static ssize_t
4625il4965_store_tx_power(struct device *d, struct device_attribute *attr,
4626                      const char *buf, size_t count)
4627{
4628        struct il_priv *il = dev_get_drvdata(d);
4629        unsigned long val;
4630        int ret;
4631
4632        ret = kstrtoul(buf, 10, &val);
4633        if (ret)
4634                IL_INFO("%s is not in decimal form.\n", buf);
4635        else {
4636                ret = il_set_tx_power(il, val, false);
4637                if (ret)
4638                        IL_ERR("failed setting tx power (0x%08x).\n", ret);
4639                else
4640                        ret = count;
4641        }
4642        return ret;
4643}
4644
4645static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il4965_show_tx_power,
4646                   il4965_store_tx_power);
4647
4648static struct attribute *il_sysfs_entries[] = {
4649        &dev_attr_temperature.attr,
4650        &dev_attr_tx_power.attr,
4651#ifdef CONFIG_IWLEGACY_DEBUG
4652        &dev_attr_debug_level.attr,
4653#endif
4654        NULL
4655};
4656
4657static const struct attribute_group il_attribute_group = {
4658        .name = NULL,           /* put in device directory */
4659        .attrs = il_sysfs_entries,
4660};
4661
4662/******************************************************************************
4663 *
4664 * uCode download functions
4665 *
4666 ******************************************************************************/
4667
4668static void
4669il4965_dealloc_ucode_pci(struct il_priv *il)
4670{
4671        il_free_fw_desc(il->pci_dev, &il->ucode_code);
4672        il_free_fw_desc(il->pci_dev, &il->ucode_data);
4673        il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
4674        il_free_fw_desc(il->pci_dev, &il->ucode_init);
4675        il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
4676        il_free_fw_desc(il->pci_dev, &il->ucode_boot);
4677}
4678
4679static void
4680il4965_nic_start(struct il_priv *il)
4681{
4682        /* Remove all resets to allow NIC to operate */
4683        _il_wr(il, CSR_RESET, 0);
4684}
4685
4686static void il4965_ucode_callback(const struct firmware *ucode_raw,
4687                                  void *context);
4688static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length);
4689
4690static int __must_check
4691il4965_request_firmware(struct il_priv *il, bool first)
4692{
4693        const char *name_pre = il->cfg->fw_name_pre;
4694        char tag[8];
4695
4696        if (first) {
4697                il->fw_idx = il->cfg->ucode_api_max;
4698                sprintf(tag, "%d", il->fw_idx);
4699        } else {
4700                il->fw_idx--;
4701                sprintf(tag, "%d", il->fw_idx);
4702        }
4703
4704        if (il->fw_idx < il->cfg->ucode_api_min) {
4705                IL_ERR("no suitable firmware found!\n");
4706                return -ENOENT;
4707        }
4708
4709        sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
4710
4711        D_INFO("attempting to load firmware '%s'\n", il->firmware_name);
4712
4713        return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name,
4714                                       &il->pci_dev->dev, GFP_KERNEL, il,
4715                                       il4965_ucode_callback);
4716}
4717
4718struct il4965_firmware_pieces {
4719        const void *inst, *data, *init, *init_data, *boot;
4720        size_t inst_size, data_size, init_size, init_data_size, boot_size;
4721};
4722
4723static int
4724il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw,
4725                     struct il4965_firmware_pieces *pieces)
4726{
4727        struct il_ucode_header *ucode = (void *)ucode_raw->data;
4728        u32 api_ver, hdr_size;
4729        const u8 *src;
4730
4731        il->ucode_ver = le32_to_cpu(ucode->ver);
4732        api_ver = IL_UCODE_API(il->ucode_ver);
4733
4734        switch (api_ver) {
4735        default:
4736        case 0:
4737        case 1:
4738        case 2:
4739                hdr_size = 24;
4740                if (ucode_raw->size < hdr_size) {
4741                        IL_ERR("File size too small!\n");
4742                        return -EINVAL;
4743                }
4744                pieces->inst_size = le32_to_cpu(ucode->v1.inst_size);
4745                pieces->data_size = le32_to_cpu(ucode->v1.data_size);
4746                pieces->init_size = le32_to_cpu(ucode->v1.init_size);
4747                pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size);
4748                pieces->boot_size = le32_to_cpu(ucode->v1.boot_size);
4749                src = ucode->v1.data;
4750                break;
4751        }
4752
4753        /* Verify size of file vs. image size info in file's header */
4754        if (ucode_raw->size !=
4755            hdr_size + pieces->inst_size + pieces->data_size +
4756            pieces->init_size + pieces->init_data_size + pieces->boot_size) {
4757
4758                IL_ERR("uCode file size %d does not match expected size\n",
4759                       (int)ucode_raw->size);
4760                return -EINVAL;
4761        }
4762
4763        pieces->inst = src;
4764        src += pieces->inst_size;
4765        pieces->data = src;
4766        src += pieces->data_size;
4767        pieces->init = src;
4768        src += pieces->init_size;
4769        pieces->init_data = src;
4770        src += pieces->init_data_size;
4771        pieces->boot = src;
4772        src += pieces->boot_size;
4773
4774        return 0;
4775}
4776
4777/**
4778 * il4965_ucode_callback - callback when firmware was loaded
4779 *
4780 * If loaded successfully, copies the firmware into buffers
4781 * for the card to fetch (via DMA).
4782 */
4783static void
4784il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
4785{
4786        struct il_priv *il = context;
4787        struct il_ucode_header *ucode;
4788        int err;
4789        struct il4965_firmware_pieces pieces;
4790        const unsigned int api_max = il->cfg->ucode_api_max;
4791        const unsigned int api_min = il->cfg->ucode_api_min;
4792        u32 api_ver;
4793
4794        u32 max_probe_length = 200;
4795        u32 standard_phy_calibration_size =
4796            IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE;
4797
4798        memset(&pieces, 0, sizeof(pieces));
4799
4800        if (!ucode_raw) {
4801                if (il->fw_idx <= il->cfg->ucode_api_max)
4802                        IL_ERR("request for firmware file '%s' failed.\n",
4803                               il->firmware_name);
4804                goto try_again;
4805        }
4806
4807        D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name,
4808               ucode_raw->size);
4809
4810        /* Make sure that we got at least the API version number */
4811        if (ucode_raw->size < 4) {
4812                IL_ERR("File size way too small!\n");
4813                goto try_again;
4814        }
4815
4816        /* Data from ucode file:  header followed by uCode images */
4817        ucode = (struct il_ucode_header *)ucode_raw->data;
4818
4819        err = il4965_load_firmware(il, ucode_raw, &pieces);
4820
4821        if (err)
4822                goto try_again;
4823
4824        api_ver = IL_UCODE_API(il->ucode_ver);
4825
4826        /*
4827         * api_ver should match the api version forming part of the
4828         * firmware filename ... but we don't check for that and only rely
4829         * on the API version read from firmware header from here on forward
4830         */
4831        if (api_ver < api_min || api_ver > api_max) {
4832                IL_ERR("Driver unable to support your firmware API. "
4833                       "Driver supports v%u, firmware is v%u.\n", api_max,
4834                       api_ver);
4835                goto try_again;
4836        }
4837
4838        if (api_ver != api_max)
4839                IL_ERR("Firmware has old API version. Expected v%u, "
4840                       "got v%u. New firmware can be obtained "
4841                       "from http://www.intellinuxwireless.org.\n", api_max,
4842                       api_ver);
4843
4844        IL_INFO("loaded firmware version %u.%u.%u.%u\n",
4845                IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
4846                IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
4847
4848        snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
4849                 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
4850                 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
4851                 IL_UCODE_SERIAL(il->ucode_ver));
4852
4853        /*
4854         * For any of the failures below (before allocating pci memory)
4855         * we will try to load a version with a smaller API -- maybe the
4856         * user just got a corrupted version of the latest API.
4857         */
4858
4859        D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
4860        D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size);
4861        D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size);
4862        D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size);
4863        D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size);
4864        D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size);
4865
4866        /* Verify that uCode images will fit in card's SRAM */
4867        if (pieces.inst_size > il->hw_params.max_inst_size) {
4868                IL_ERR("uCode instr len %zd too large to fit in\n",
4869                       pieces.inst_size);
4870                goto try_again;
4871        }
4872
4873        if (pieces.data_size > il->hw_params.max_data_size) {
4874                IL_ERR("uCode data len %zd too large to fit in\n",
4875                       pieces.data_size);
4876                goto try_again;
4877        }
4878
4879        if (pieces.init_size > il->hw_params.max_inst_size) {
4880                IL_ERR("uCode init instr len %zd too large to fit in\n",
4881                       pieces.init_size);
4882                goto try_again;
4883        }
4884
4885        if (pieces.init_data_size > il->hw_params.max_data_size) {
4886                IL_ERR("uCode init data len %zd too large to fit in\n",
4887                       pieces.init_data_size);
4888                goto try_again;
4889        }
4890
4891        if (pieces.boot_size > il->hw_params.max_bsm_size) {
4892                IL_ERR("uCode boot instr len %zd too large to fit in\n",
4893                       pieces.boot_size);
4894                goto try_again;
4895        }
4896
4897        /* Allocate ucode buffers for card's bus-master loading ... */
4898
4899        /* Runtime instructions and 2 copies of data:
4900         * 1) unmodified from disk
4901         * 2) backup cache for save/restore during power-downs */
4902        il->ucode_code.len = pieces.inst_size;
4903        il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
4904
4905        il->ucode_data.len = pieces.data_size;
4906        il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
4907
4908        il->ucode_data_backup.len = pieces.data_size;
4909        il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
4910
4911        if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
4912            !il->ucode_data_backup.v_addr)
4913                goto err_pci_alloc;
4914
4915        /* Initialization instructions and data */
4916        if (pieces.init_size && pieces.init_data_size) {
4917                il->ucode_init.len = pieces.init_size;
4918                il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
4919
4920                il->ucode_init_data.len = pieces.init_data_size;
4921                il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
4922
4923                if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
4924                        goto err_pci_alloc;
4925        }
4926
4927        /* Bootstrap (instructions only, no data) */
4928        if (pieces.boot_size) {
4929                il->ucode_boot.len = pieces.boot_size;
4930                il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
4931
4932                if (!il->ucode_boot.v_addr)
4933                        goto err_pci_alloc;
4934        }
4935
4936        /* Now that we can no longer fail, copy information */
4937
4938        il->sta_key_max_num = STA_KEY_MAX_NUM;
4939
4940        /* Copy images into buffers for card's bus-master reads ... */
4941
4942        /* Runtime instructions (first block of data in file) */
4943        D_INFO("Copying (but not loading) uCode instr len %zd\n",
4944               pieces.inst_size);
4945        memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);
4946
4947        D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
4948               il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
4949
4950        /*
4951         * Runtime data
4952         * NOTE:  Copy into backup buffer will be done in il_up()
4953         */
4954        D_INFO("Copying (but not loading) uCode data len %zd\n",
4955               pieces.data_size);
4956        memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
4957        memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
4958
4959        /* Initialization instructions */
4960        if (pieces.init_size) {
4961                D_INFO("Copying (but not loading) init instr len %zd\n",
4962                       pieces.init_size);
4963                memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
4964        }
4965
4966        /* Initialization data */
4967        if (pieces.init_data_size) {
4968                D_INFO("Copying (but not loading) init data len %zd\n",
4969                       pieces.init_data_size);
4970                memcpy(il->ucode_init_data.v_addr, pieces.init_data,
4971                       pieces.init_data_size);
4972        }
4973
4974        /* Bootstrap instructions */
4975        D_INFO("Copying (but not loading) boot instr len %zd\n",
4976               pieces.boot_size);
4977        memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
4978
4979        /*
4980         * figure out the offset of chain noise reset and gain commands
4981         * base on the size of standard phy calibration commands table size
4982         */
4983        il->_4965.phy_calib_chain_noise_reset_cmd =
4984            standard_phy_calibration_size;
4985        il->_4965.phy_calib_chain_noise_gain_cmd =
4986            standard_phy_calibration_size + 1;
4987
4988        /**************************************************
4989         * This is still part of probe() in a sense...
4990         *
4991         * 9. Setup and register with mac80211 and debugfs
4992         **************************************************/
4993        err = il4965_mac_setup_register(il, max_probe_length);
4994        if (err)
4995                goto out_unbind;
4996
4997        err = il_dbgfs_register(il, DRV_NAME);
4998        if (err)
4999                IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
5000                       err);
5001
5002        err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group);
5003        if (err) {
5004                IL_ERR("failed to create sysfs device attributes\n");
5005                goto out_unbind;
5006        }
5007
5008        /* We have our copies now, allow OS release its copies */
5009        release_firmware(ucode_raw);
5010        complete(&il->_4965.firmware_loading_complete);
5011        return;
5012
5013try_again:
5014        /* try next, if any */
5015        if (il4965_request_firmware(il, false))
5016                goto out_unbind;
5017        release_firmware(ucode_raw);
5018        return;
5019
5020err_pci_alloc:
5021        IL_ERR("failed to allocate pci memory\n");
5022        il4965_dealloc_ucode_pci(il);
5023out_unbind:
5024        complete(&il->_4965.firmware_loading_complete);
5025        device_release_driver(&il->pci_dev->dev);
5026        release_firmware(ucode_raw);
5027}
5028
5029static const char *const desc_lookup_text[] = {
5030        "OK",
5031        "FAIL",
5032        "BAD_PARAM",
5033        "BAD_CHECKSUM",
5034        "NMI_INTERRUPT_WDG",
5035        "SYSASSERT",
5036        "FATAL_ERROR",
5037        "BAD_COMMAND",
5038        "HW_ERROR_TUNE_LOCK",
5039        "HW_ERROR_TEMPERATURE",
5040        "ILLEGAL_CHAN_FREQ",
5041        "VCC_NOT_STBL",
5042        "FH49_ERROR",
5043        "NMI_INTERRUPT_HOST",
5044        "NMI_INTERRUPT_ACTION_PT",
5045        "NMI_INTERRUPT_UNKNOWN",
5046        "UCODE_VERSION_MISMATCH",
5047        "HW_ERROR_ABS_LOCK",
5048        "HW_ERROR_CAL_LOCK_FAIL",
5049        "NMI_INTERRUPT_INST_ACTION_PT",
5050        "NMI_INTERRUPT_DATA_ACTION_PT",
5051        "NMI_TRM_HW_ER",
5052        "NMI_INTERRUPT_TRM",
5053        "NMI_INTERRUPT_BREAK_POINT",
5054        "DEBUG_0",
5055        "DEBUG_1",
5056        "DEBUG_2",
5057        "DEBUG_3",
5058};
5059
5060static struct {
5061        char *name;
5062        u8 num;
5063} advanced_lookup[] = {
5064        {
5065        "NMI_INTERRUPT_WDG", 0x34}, {
5066        "SYSASSERT", 0x35}, {
5067        "UCODE_VERSION_MISMATCH", 0x37}, {
5068        "BAD_COMMAND", 0x38}, {
5069        "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, {
5070        "FATAL_ERROR", 0x3D}, {
5071        "NMI_TRM_HW_ERR", 0x46}, {
5072        "NMI_INTERRUPT_TRM", 0x4C}, {
5073        "NMI_INTERRUPT_BREAK_POINT", 0x54}, {
5074        "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, {
5075        "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, {
5076        "NMI_INTERRUPT_HOST", 0x66}, {
5077        "NMI_INTERRUPT_ACTION_PT", 0x7C}, {
5078        "NMI_INTERRUPT_UNKNOWN", 0x84}, {
5079        "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, {
5080"ADVANCED_SYSASSERT", 0},};
5081
5082static const char *
5083il4965_desc_lookup(u32 num)
5084{
5085        int i;
5086        int max = ARRAY_SIZE(desc_lookup_text);
5087
5088        if (num < max)
5089                return desc_lookup_text[num];
5090
5091        max = ARRAY_SIZE(advanced_lookup) - 1;
5092        for (i = 0; i < max; i++) {
5093                if (advanced_lookup[i].num == num)
5094                        break;
5095        }
5096        return advanced_lookup[i].name;
5097}
5098
5099#define ERROR_START_OFFSET  (1 * sizeof(u32))
5100#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
5101
5102void
5103il4965_dump_nic_error_log(struct il_priv *il)
5104{
5105        u32 data2, line;
5106        u32 desc, time, count, base, data1;
5107        u32 blink1, blink2, ilink1, ilink2;
5108        u32 pc, hcmd;
5109
5110        if (il->ucode_type == UCODE_INIT)
5111                base = le32_to_cpu(il->card_alive_init.error_event_table_ptr);
5112        else
5113                base = le32_to_cpu(il->card_alive.error_event_table_ptr);
5114
5115        if (!il->ops->is_valid_rtc_data_addr(base)) {
5116                IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n",
5117                       base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT");
5118                return;
5119        }
5120
5121        count = il_read_targ_mem(il, base);
5122
5123        if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
5124                IL_ERR("Start IWL Error Log Dump:\n");
5125                IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
5126        }
5127
5128        desc = il_read_targ_mem(il, base + 1 * sizeof(u32));
5129        il->isr_stats.err_code = desc;
5130        pc = il_read_targ_mem(il, base + 2 * sizeof(u32));
5131        blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32));
5132        blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32));
5133        ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32));
5134        ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32));
5135        data1 = il_read_targ_mem(il, base + 7 * sizeof(u32));
5136        data2 = il_read_targ_mem(il, base + 8 * sizeof(u32));
5137        line = il_read_targ_mem(il, base + 9 * sizeof(u32));
5138        time = il_read_targ_mem(il, base + 11 * sizeof(u32));
5139        hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32));
5140
5141        IL_ERR("Desc                                  Time       "
5142               "data1      data2      line\n");
5143        IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
5144               il4965_desc_lookup(desc), desc, time, data1, data2, line);
5145        IL_ERR("pc      blink1  blink2  ilink1  ilink2  hcmd\n");
5146        IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1,
5147               blink2, ilink1, ilink2, hcmd);
5148}
5149
5150static void
5151il4965_rf_kill_ct_config(struct il_priv *il)
5152{
5153        struct il_ct_kill_config cmd;
5154        unsigned long flags;
5155        int ret = 0;
5156
5157        spin_lock_irqsave(&il->lock, flags);
5158        _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
5159               CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
5160        spin_unlock_irqrestore(&il->lock, flags);
5161
5162        cmd.critical_temperature_R =
5163            cpu_to_le32(il->hw_params.ct_kill_threshold);
5164
5165        ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd);
5166        if (ret)
5167                IL_ERR("C_CT_KILL_CONFIG failed\n");
5168        else
5169                D_INFO("C_CT_KILL_CONFIG " "succeeded, "
5170                       "critical temperature is %d\n",
5171                       il->hw_params.ct_kill_threshold);
5172}
5173
5174static const s8 default_queue_to_tx_fifo[] = {
5175        IL_TX_FIFO_VO,
5176        IL_TX_FIFO_VI,
5177        IL_TX_FIFO_BE,
5178        IL_TX_FIFO_BK,
5179        IL49_CMD_FIFO_NUM,
5180        IL_TX_FIFO_UNUSED,
5181        IL_TX_FIFO_UNUSED,
5182};
5183
5184#define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
5185
5186static int
5187il4965_alive_notify(struct il_priv *il)
5188{
5189        u32 a;
5190        unsigned long flags;
5191        int i, chan;
5192        u32 reg_val;
5193
5194        spin_lock_irqsave(&il->lock, flags);
5195
5196        /* Clear 4965's internal Tx Scheduler data base */
5197        il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR);
5198        a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET;
5199        for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
5200                il_write_targ_mem(il, a, 0);
5201        for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
5202                il_write_targ_mem(il, a, 0);
5203        for (;
5204             a <
5205             il->scd_base_addr +
5206             IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num);
5207             a += 4)
5208                il_write_targ_mem(il, a, 0);
5209
5210        /* Tel 4965 where to find Tx byte count tables */
5211        il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10);
5212
5213        /* Enable DMA channel */
5214        for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++)
5215                il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan),
5216                      FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
5217                      FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
5218
5219        /* Update FH chicken bits */
5220        reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG);
5221        il_wr(il, FH49_TX_CHICKEN_BITS_REG,
5222              reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
5223
5224        /* Disable chain mode for all queues */
5225        il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0);
5226
5227        /* Initialize each Tx queue (including the command queue) */
5228        for (i = 0; i < il->hw_params.max_txq_num; i++) {
5229
5230                /* TFD circular buffer read/write idxes */
5231                il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0);
5232                il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));
5233
5234                /* Max Tx Window size for Scheduler-ACK mode */
5235                il_write_targ_mem(il,
5236                                  il->scd_base_addr +
5237                                  IL49_SCD_CONTEXT_QUEUE_OFFSET(i),
5238                                  (SCD_WIN_SIZE <<
5239                                   IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
5240                                  IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
5241
5242                /* Frame limit */
5243                il_write_targ_mem(il,
5244                                  il->scd_base_addr +
5245                                  IL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
5246                                  sizeof(u32),
5247                                  (SCD_FRAME_LIMIT <<
5248                                   IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
5249                                  IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
5250
5251        }
5252        il_wr_prph(il, IL49_SCD_INTERRUPT_MASK,
5253                   (1 << il->hw_params.max_txq_num) - 1);
5254
5255        /* Activate all Tx DMA/FIFO channels */
5256        il4965_txq_set_sched(il, IL_MASK(0, 6));
5257
5258        il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0);
5259
5260        /* make sure all queue are not stopped */
5261        memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped));
5262        for (i = 0; i < 4; i++)
5263                atomic_set(&il->queue_stop_count[i], 0);
5264
5265        /* reset to 0 to enable all the queue first */
5266        il->txq_ctx_active_msk = 0;
5267        /* Map each Tx/cmd queue to its corresponding fifo */
5268        BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
5269
5270        for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
5271                int ac = default_queue_to_tx_fifo[i];
5272
5273                il_txq_ctx_activate(il, i);
5274
5275                if (ac == IL_TX_FIFO_UNUSED)
5276                        continue;
5277
5278                il4965_tx_queue_set_status(il, &il->txq[i], ac, 0);
5279        }
5280
5281        spin_unlock_irqrestore(&il->lock, flags);
5282
5283        return 0;
5284}
5285
5286/**
5287 * il4965_alive_start - called after N_ALIVE notification received
5288 *                   from protocol/runtime uCode (initialization uCode's
5289 *                   Alive gets handled by il_init_alive_start()).
5290 */
5291static void
5292il4965_alive_start(struct il_priv *il)
5293{
5294        int ret = 0;
5295
5296        D_INFO("Runtime Alive received.\n");
5297
5298        if (il->card_alive.is_valid != UCODE_VALID_OK) {
5299                /* We had an error bringing up the hardware, so take it
5300                 * all the way back down so we can try again */
5301                D_INFO("Alive failed.\n");
5302                goto restart;
5303        }
5304
5305        /* Initialize uCode has loaded Runtime uCode ... verify inst image.
5306         * This is a paranoid check, because we would not have gotten the
5307         * "runtime" alive if code weren't properly loaded.  */
5308        if (il4965_verify_ucode(il)) {
5309                /* Runtime instruction load was bad;
5310                 * take it all the way back down so we can try again */
5311                D_INFO("Bad runtime uCode load.\n");
5312                goto restart;
5313        }
5314
5315        ret = il4965_alive_notify(il);
5316        if (ret) {
5317                IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret);
5318                goto restart;
5319        }
5320
5321        /* After the ALIVE response, we can send host commands to the uCode */
5322        set_bit(S_ALIVE, &il->status);
5323
5324        /* Enable watchdog to monitor the driver tx queues */
5325        il_setup_watchdog(il);
5326
5327        if (il_is_rfkill(il))
5328                return;
5329
5330        ieee80211_wake_queues(il->hw);
5331
5332        il->active_rate = RATES_MASK;
5333
5334        il_power_update_mode(il, true);
5335        D_INFO("Updated power mode\n");
5336
5337        if (il_is_associated(il)) {
5338                struct il_rxon_cmd *active_rxon =
5339                    (struct il_rxon_cmd *)&il->active;
5340                /* apply any changes in staging */
5341                il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
5342                active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
5343        } else {
5344                /* Initialize our rx_config data */
5345                il_connection_init_rx_config(il);
5346
5347                if (il->ops->set_rxon_chain)
5348                        il->ops->set_rxon_chain(il);
5349        }
5350
5351        /* Configure bluetooth coexistence if enabled */
5352        il_send_bt_config(il);
5353
5354        il4965_reset_run_time_calib(il);
5355
5356        set_bit(S_READY, &il->status);
5357
5358        /* Configure the adapter for unassociated operation */
5359        il_commit_rxon(il);
5360
5361        /* At this point, the NIC is initialized and operational */
5362        il4965_rf_kill_ct_config(il);
5363
5364        D_INFO("ALIVE processing complete.\n");
5365        wake_up(&il->wait_command_queue);
5366
5367        return;
5368
5369restart:
5370        queue_work(il->workqueue, &il->restart);
5371}
5372
5373static void il4965_cancel_deferred_work(struct il_priv *il);
5374
5375static void
5376__il4965_down(struct il_priv *il)
5377{
5378        unsigned long flags;
5379        int exit_pending;
5380
5381        D_INFO(DRV_NAME " is going down\n");
5382
5383        il_scan_cancel_timeout(il, 200);
5384
5385        exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
5386
5387        /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
5388         * to prevent rearm timer */
5389        del_timer_sync(&il->watchdog);
5390
5391        il_clear_ucode_stations(il);
5392
5393        /* FIXME: race conditions ? */
5394        spin_lock_irq(&il->sta_lock);
5395        /*
5396         * Remove all key information that is not stored as part
5397         * of station information since mac80211 may not have had
5398         * a chance to remove all the keys. When device is
5399         * reconfigured by mac80211 after an error all keys will
5400         * be reconfigured.
5401         */
5402        memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys));
5403        il->_4965.key_mapping_keys = 0;
5404        spin_unlock_irq(&il->sta_lock);
5405
5406        il_dealloc_bcast_stations(il);
5407        il_clear_driver_stations(il);
5408
5409        /* Unblock any waiting calls */
5410        wake_up_all(&il->wait_command_queue);
5411
5412        /* Wipe out the EXIT_PENDING status bit if we are not actually
5413         * exiting the module */
5414        if (!exit_pending)
5415                clear_bit(S_EXIT_PENDING, &il->status);
5416
5417        /* stop and reset the on-board processor */
5418        _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
5419
5420        /* tell the device to stop sending interrupts */
5421        spin_lock_irqsave(&il->lock, flags);
5422        il_disable_interrupts(il);
5423        spin_unlock_irqrestore(&il->lock, flags);
5424        il4965_synchronize_irq(il);
5425
5426        if (il->mac80211_registered)
5427                ieee80211_stop_queues(il->hw);
5428
5429        /* If we have not previously called il_init() then
5430         * clear all bits but the RF Kill bit and return */
5431        if (!il_is_init(il)) {
5432                il->status =
5433                    test_bit(S_RFKILL, &il->status) << S_RFKILL |
5434                    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
5435                    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
5436                goto exit;
5437        }
5438
5439        /* ...otherwise clear out all the status bits but the RF Kill
5440         * bit and continue taking the NIC down. */
5441        il->status &=
5442            test_bit(S_RFKILL, &il->status) << S_RFKILL |
5443            test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
5444            test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
5445            test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
5446
5447        /*
5448         * We disabled and synchronized interrupt, and priv->mutex is taken, so
5449         * here is the only thread which will program device registers, but
5450         * still have lockdep assertions, so we are taking reg_lock.
5451         */
5452        spin_lock_irq(&il->reg_lock);
5453        /* FIXME: il_grab_nic_access if rfkill is off ? */
5454
5455        il4965_txq_ctx_stop(il);
5456        il4965_rxq_stop(il);
5457        /* Power-down device's busmaster DMA clocks */
5458        _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
5459        udelay(5);
5460        /* Make sure (redundant) we've released our request to stay awake */
5461        _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
5462        /* Stop the device, and put it in low power state */
5463        _il_apm_stop(il);
5464
5465        spin_unlock_irq(&il->reg_lock);
5466
5467        il4965_txq_ctx_unmap(il);
5468exit:
5469        memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
5470
5471        dev_kfree_skb(il->beacon_skb);
5472        il->beacon_skb = NULL;
5473
5474        /* clear out any free frames */
5475        il4965_clear_free_frames(il);
5476}
5477
5478static void
5479il4965_down(struct il_priv *il)
5480{
5481        mutex_lock(&il->mutex);
5482        __il4965_down(il);
5483        mutex_unlock(&il->mutex);
5484
5485        il4965_cancel_deferred_work(il);
5486}
5487
5488
5489static void
5490il4965_set_hw_ready(struct il_priv *il)
5491{
5492        int ret;
5493
5494        il_set_bit(il, CSR_HW_IF_CONFIG_REG,
5495                   CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
5496
5497        /* See if we got it */
5498        ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
5499                           CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
5500                           CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
5501                           100);
5502        if (ret >= 0)
5503                il->hw_ready = true;
5504
5505        D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not");
5506}
5507
5508static void
5509il4965_prepare_card_hw(struct il_priv *il)
5510{
5511        int ret;
5512
5513        il->hw_ready = false;
5514
5515        il4965_set_hw_ready(il);
5516        if (il->hw_ready)
5517                return;
5518
5519        /* If HW is not ready, prepare the conditions to check again */
5520        il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE);
5521
5522        ret =
5523            _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
5524                         ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
5525                         CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
5526
5527        /* HW should be ready by now, check again. */
5528        if (ret != -ETIMEDOUT)
5529                il4965_set_hw_ready(il);
5530}
5531
5532#define MAX_HW_RESTARTS 5
5533
5534static int
5535__il4965_up(struct il_priv *il)
5536{
5537        int i;
5538        int ret;
5539
5540        if (test_bit(S_EXIT_PENDING, &il->status)) {
5541                IL_WARN("Exit pending; will not bring the NIC up\n");
5542                return -EIO;
5543        }
5544
5545        if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
5546                IL_ERR("ucode not available for device bringup\n");
5547                return -EIO;
5548        }
5549
5550        ret = il4965_alloc_bcast_station(il);
5551        if (ret) {
5552                il_dealloc_bcast_stations(il);
5553                return ret;
5554        }
5555
5556        il4965_prepare_card_hw(il);
5557        if (!il->hw_ready) {
5558                il_dealloc_bcast_stations(il);
5559                IL_ERR("HW not ready\n");
5560                return -EIO;
5561        }
5562
5563        /* If platform's RF_KILL switch is NOT set to KILL */
5564        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
5565                clear_bit(S_RFKILL, &il->status);
5566        else {
5567                set_bit(S_RFKILL, &il->status);
5568                wiphy_rfkill_set_hw_state(il->hw->wiphy, true);
5569
5570                il_dealloc_bcast_stations(il);
5571                il_enable_rfkill_int(il);
5572                IL_WARN("Radio disabled by HW RF Kill switch\n");
5573                return 0;
5574        }
5575
5576        _il_wr(il, CSR_INT, 0xFFFFFFFF);
5577
5578        /* must be initialised before il_hw_nic_init */
5579        il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM;
5580
5581        ret = il4965_hw_nic_init(il);
5582        if (ret) {
5583                IL_ERR("Unable to init nic\n");
5584                il_dealloc_bcast_stations(il);
5585                return ret;
5586        }
5587
5588        /* make sure rfkill handshake bits are cleared */
5589        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
5590        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
5591
5592        /* clear (again), then enable host interrupts */
5593        _il_wr(il, CSR_INT, 0xFFFFFFFF);
5594        il_enable_interrupts(il);
5595
5596        /* really make sure rfkill handshake bits are cleared */
5597        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
5598        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
5599
5600        /* Copy original ucode data image from disk into backup cache.
5601         * This will be used to initialize the on-board processor's
5602         * data SRAM for a clean start when the runtime program first loads. */
5603        memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
5604               il->ucode_data.len);
5605
5606        for (i = 0; i < MAX_HW_RESTARTS; i++) {
5607
5608                /* load bootstrap state machine,
5609                 * load bootstrap program into processor's memory,
5610                 * prepare to load the "initialize" uCode */
5611                ret = il->ops->load_ucode(il);
5612
5613                if (ret) {
5614                        IL_ERR("Unable to set up bootstrap uCode: %d\n", ret);
5615                        continue;
5616                }
5617
5618                /* start card; "initialize" will load runtime ucode */
5619                il4965_nic_start(il);
5620
5621                D_INFO(DRV_NAME " is coming up\n");
5622
5623                return 0;
5624        }
5625
5626        set_bit(S_EXIT_PENDING, &il->status);
5627        __il4965_down(il);
5628        clear_bit(S_EXIT_PENDING, &il->status);
5629
5630        /* tried to restart and config the device for as long as our
5631         * patience could withstand */
5632        IL_ERR("Unable to initialize device after %d attempts.\n", i);
5633        return -EIO;
5634}
5635
5636/*****************************************************************************
5637 *
5638 * Workqueue callbacks
5639 *
5640 *****************************************************************************/
5641
5642static void
5643il4965_bg_init_alive_start(struct work_struct *data)
5644{
5645        struct il_priv *il =
5646            container_of(data, struct il_priv, init_alive_start.work);
5647
5648        mutex_lock(&il->mutex);
5649        if (test_bit(S_EXIT_PENDING, &il->status))
5650                goto out;
5651
5652        il->ops->init_alive_start(il);
5653out:
5654        mutex_unlock(&il->mutex);
5655}
5656
5657static void
5658il4965_bg_alive_start(struct work_struct *data)
5659{
5660        struct il_priv *il =
5661            container_of(data, struct il_priv, alive_start.work);
5662
5663        mutex_lock(&il->mutex);
5664        if (test_bit(S_EXIT_PENDING, &il->status))
5665                goto out;
5666
5667        il4965_alive_start(il);
5668out:
5669        mutex_unlock(&il->mutex);
5670}
5671
5672static void
5673il4965_bg_run_time_calib_work(struct work_struct *work)
5674{
5675        struct il_priv *il = container_of(work, struct il_priv,
5676                                          run_time_calib_work);
5677
5678        mutex_lock(&il->mutex);
5679
5680        if (test_bit(S_EXIT_PENDING, &il->status) ||
5681            test_bit(S_SCANNING, &il->status)) {
5682                mutex_unlock(&il->mutex);
5683                return;
5684        }
5685
5686        if (il->start_calib) {
5687                il4965_chain_noise_calibration(il, (void *)&il->_4965.stats);
5688                il4965_sensitivity_calibration(il, (void *)&il->_4965.stats);
5689        }
5690
5691        mutex_unlock(&il->mutex);
5692}
5693
5694static void
5695il4965_bg_restart(struct work_struct *data)
5696{
5697        struct il_priv *il = container_of(data, struct il_priv, restart);
5698
5699        if (test_bit(S_EXIT_PENDING, &il->status))
5700                return;
5701
5702        if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
5703                mutex_lock(&il->mutex);
5704                il->is_open = 0;
5705
5706                __il4965_down(il);
5707
5708                mutex_unlock(&il->mutex);
5709                il4965_cancel_deferred_work(il);
5710                ieee80211_restart_hw(il->hw);
5711        } else {
5712                il4965_down(il);
5713
5714                mutex_lock(&il->mutex);
5715                if (test_bit(S_EXIT_PENDING, &il->status)) {
5716                        mutex_unlock(&il->mutex);
5717                        return;
5718                }
5719
5720                __il4965_up(il);
5721                mutex_unlock(&il->mutex);
5722        }
5723}
5724
5725static void
5726il4965_bg_rx_replenish(struct work_struct *data)
5727{
5728        struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
5729
5730        if (test_bit(S_EXIT_PENDING, &il->status))
5731                return;
5732
5733        mutex_lock(&il->mutex);
5734        il4965_rx_replenish(il);
5735        mutex_unlock(&il->mutex);
5736}
5737
5738/*****************************************************************************
5739 *
5740 * mac80211 entry point functions
5741 *
5742 *****************************************************************************/
5743
5744#define UCODE_READY_TIMEOUT     (4 * HZ)
5745
5746/*
5747 * Not a mac80211 entry point function, but it fits in with all the
5748 * other mac80211 functions grouped here.
5749 */
5750static int
5751il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length)
5752{
5753        int ret;
5754        struct ieee80211_hw *hw = il->hw;
5755
5756        hw->rate_control_algorithm = "iwl-4965-rs";
5757
5758        /* Tell mac80211 our characteristics */
5759        ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
5760        ieee80211_hw_set(hw, SUPPORTS_PS);
5761        ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
5762        ieee80211_hw_set(hw, SPECTRUM_MGMT);
5763        ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC);
5764        ieee80211_hw_set(hw, SIGNAL_DBM);
5765        ieee80211_hw_set(hw, AMPDU_AGGREGATION);
5766        if (il->cfg->sku & IL_SKU_N)
5767                hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
5768                                       NL80211_FEATURE_STATIC_SMPS;
5769
5770        hw->sta_data_size = sizeof(struct il_station_priv);
5771        hw->vif_data_size = sizeof(struct il_vif_priv);
5772
5773        hw->wiphy->interface_modes =
5774            BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
5775
5776        hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
5777        hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
5778                                       REGULATORY_DISABLE_BEACON_HINTS;
5779
5780        /*
5781         * For now, disable PS by default because it affects
5782         * RX performance significantly.
5783         */
5784        hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
5785
5786        hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
5787        /* we create the 802.11 header and a zero-length SSID element */
5788        hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2;
5789
5790        /* Default value; 4 EDCA QOS priorities */
5791        hw->queues = 4;
5792
5793        hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL;
5794
5795        if (il->bands[NL80211_BAND_2GHZ].n_channels)
5796                il->hw->wiphy->bands[NL80211_BAND_2GHZ] =
5797                    &il->bands[NL80211_BAND_2GHZ];
5798        if (il->bands[NL80211_BAND_5GHZ].n_channels)
5799                il->hw->wiphy->bands[NL80211_BAND_5GHZ] =
5800                    &il->bands[NL80211_BAND_5GHZ];
5801
5802        il_leds_init(il);
5803
5804        wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
5805
5806        ret = ieee80211_register_hw(il->hw);
5807        if (ret) {
5808                IL_ERR("Failed to register hw (error %d)\n", ret);
5809                return ret;
5810        }
5811        il->mac80211_registered = 1;
5812
5813        return 0;
5814}
5815
5816int
5817il4965_mac_start(struct ieee80211_hw *hw)
5818{
5819        struct il_priv *il = hw->priv;
5820        int ret;
5821
5822        D_MAC80211("enter\n");
5823
5824        /* we should be verifying the device is ready to be opened */
5825        mutex_lock(&il->mutex);
5826        ret = __il4965_up(il);
5827        mutex_unlock(&il->mutex);
5828
5829        if (ret)
5830                return ret;
5831
5832        if (il_is_rfkill(il))
5833                goto out;
5834
5835        D_INFO("Start UP work done.\n");
5836
5837        /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
5838         * mac80211 will not be run successfully. */
5839        ret = wait_event_timeout(il->wait_command_queue,
5840                                 test_bit(S_READY, &il->status),
5841                                 UCODE_READY_TIMEOUT);
5842        if (!ret) {
5843                if (!test_bit(S_READY, &il->status)) {
5844                        IL_ERR("START_ALIVE timeout after %dms.\n",
5845                                jiffies_to_msecs(UCODE_READY_TIMEOUT));
5846                        return -ETIMEDOUT;
5847                }
5848        }
5849
5850        il4965_led_enable(il);
5851
5852out:
5853        il->is_open = 1;
5854        D_MAC80211("leave\n");
5855        return 0;
5856}
5857
5858void
5859il4965_mac_stop(struct ieee80211_hw *hw)
5860{
5861        struct il_priv *il = hw->priv;
5862
5863        D_MAC80211("enter\n");
5864
5865        if (!il->is_open)
5866                return;
5867
5868        il->is_open = 0;
5869
5870        il4965_down(il);
5871
5872        flush_workqueue(il->workqueue);
5873
5874        /* User space software may expect getting rfkill changes
5875         * even if interface is down */
5876        _il_wr(il, CSR_INT, 0xFFFFFFFF);
5877        il_enable_rfkill_int(il);
5878
5879        D_MAC80211("leave\n");
5880}
5881
5882void
5883il4965_mac_tx(struct ieee80211_hw *hw,
5884              struct ieee80211_tx_control *control,
5885              struct sk_buff *skb)
5886{
5887        struct il_priv *il = hw->priv;
5888
5889        D_MACDUMP("enter\n");
5890
5891        D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
5892             ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
5893
5894        if (il4965_tx_skb(il, control->sta, skb))
5895                dev_kfree_skb_any(skb);
5896
5897        D_MACDUMP("leave\n");
5898}
5899
5900void
5901il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
5902                           struct ieee80211_key_conf *keyconf,
5903                           struct ieee80211_sta *sta, u32 iv32, u16 * phase1key)
5904{
5905        struct il_priv *il = hw->priv;
5906
5907        D_MAC80211("enter\n");
5908
5909        il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key);
5910
5911        D_MAC80211("leave\n");
5912}
5913
5914int
5915il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
5916                   struct ieee80211_vif *vif, struct ieee80211_sta *sta,
5917                   struct ieee80211_key_conf *key)
5918{
5919        struct il_priv *il = hw->priv;
5920        int ret;
5921        u8 sta_id;
5922        bool is_default_wep_key = false;
5923
5924        D_MAC80211("enter\n");
5925
5926        if (il->cfg->mod_params->sw_crypto) {
5927                D_MAC80211("leave - hwcrypto disabled\n");
5928                return -EOPNOTSUPP;
5929        }
5930
5931        /*
5932         * To support IBSS RSN, don't program group keys in IBSS, the
5933         * hardware will then not attempt to decrypt the frames.
5934         */
5935        if (vif->type == NL80211_IFTYPE_ADHOC &&
5936            !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
5937                D_MAC80211("leave - ad-hoc group key\n");
5938                return -EOPNOTSUPP;
5939        }
5940
5941        sta_id = il_sta_id_or_broadcast(il, sta);
5942        if (sta_id == IL_INVALID_STATION)
5943                return -EINVAL;
5944
5945        mutex_lock(&il->mutex);
5946        il_scan_cancel_timeout(il, 100);
5947
5948        /*
5949         * If we are getting WEP group key and we didn't receive any key mapping
5950         * so far, we are in legacy wep mode (group key only), otherwise we are
5951         * in 1X mode.
5952         * In legacy wep mode, we use another host command to the uCode.
5953         */
5954        if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
5955             key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) {
5956                if (cmd == SET_KEY)
5957                        is_default_wep_key = !il->_4965.key_mapping_keys;
5958                else
5959                        is_default_wep_key =
5960                            (key->hw_key_idx == HW_KEY_DEFAULT);
5961        }
5962
5963        switch (cmd) {
5964        case SET_KEY:
5965                if (is_default_wep_key)
5966                        ret = il4965_set_default_wep_key(il, key);
5967                else
5968                        ret = il4965_set_dynamic_key(il, key, sta_id);
5969
5970                D_MAC80211("enable hwcrypto key\n");
5971                break;
5972        case DISABLE_KEY:
5973                if (is_default_wep_key)
5974                        ret = il4965_remove_default_wep_key(il, key);
5975                else
5976                        ret = il4965_remove_dynamic_key(il, key, sta_id);
5977
5978                D_MAC80211("disable hwcrypto key\n");
5979                break;
5980        default:
5981                ret = -EINVAL;
5982        }
5983
5984        mutex_unlock(&il->mutex);
5985        D_MAC80211("leave\n");
5986
5987        return ret;
5988}
5989
5990int
5991il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
5992                        struct ieee80211_ampdu_params *params)
5993{
5994        struct il_priv *il = hw->priv;
5995        int ret = -EINVAL;
5996        struct ieee80211_sta *sta = params->sta;
5997        enum ieee80211_ampdu_mlme_action action = params->action;
5998        u16 tid = params->tid;
5999        u16 *ssn = &params->ssn;
6000
6001        D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid);
6002
6003        if (!(il->cfg->sku & IL_SKU_N))
6004                return -EACCES;
6005
6006        mutex_lock(&il->mutex);
6007
6008        switch (action) {
6009        case IEEE80211_AMPDU_RX_START:
6010                D_HT("start Rx\n");
6011                ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn);
6012                break;
6013        case IEEE80211_AMPDU_RX_STOP:
6014                D_HT("stop Rx\n");
6015                ret = il4965_sta_rx_agg_stop(il, sta, tid);
6016                if (test_bit(S_EXIT_PENDING, &il->status))
6017                        ret = 0;
6018                break;
6019        case IEEE80211_AMPDU_TX_START:
6020                D_HT("start Tx\n");
6021                ret = il4965_tx_agg_start(il, vif, sta, tid, ssn);
6022                break;
6023        case IEEE80211_AMPDU_TX_STOP_CONT:
6024        case IEEE80211_AMPDU_TX_STOP_FLUSH:
6025        case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
6026                D_HT("stop Tx\n");
6027                ret = il4965_tx_agg_stop(il, vif, sta, tid);
6028                if (test_bit(S_EXIT_PENDING, &il->status))
6029                        ret = 0;
6030                break;
6031        case IEEE80211_AMPDU_TX_OPERATIONAL:
6032                ret = 0;
6033                break;
6034        }
6035        mutex_unlock(&il->mutex);
6036
6037        return ret;
6038}
6039
6040int
6041il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
6042                   struct ieee80211_sta *sta)
6043{
6044        struct il_priv *il = hw->priv;
6045        struct il_station_priv *sta_priv = (void *)sta->drv_priv;
6046        bool is_ap = vif->type == NL80211_IFTYPE_STATION;
6047        int ret;
6048        u8 sta_id;
6049
6050        D_INFO("received request to add station %pM\n", sta->addr);
6051        mutex_lock(&il->mutex);
6052        D_INFO("proceeding to add station %pM\n", sta->addr);
6053        sta_priv->common.sta_id = IL_INVALID_STATION;
6054
6055        atomic_set(&sta_priv->pending_frames, 0);
6056
6057        ret =
6058            il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
6059        if (ret) {
6060                IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
6061                /* Should we return success if return code is EEXIST ? */
6062                mutex_unlock(&il->mutex);
6063                return ret;
6064        }
6065
6066        sta_priv->common.sta_id = sta_id;
6067
6068        /* Initialize rate scaling */
6069        D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
6070        il4965_rs_rate_init(il, sta, sta_id);
6071        mutex_unlock(&il->mutex);
6072
6073        return 0;
6074}
6075
6076void
6077il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
6078                          struct ieee80211_channel_switch *ch_switch)
6079{
6080        struct il_priv *il = hw->priv;
6081        const struct il_channel_info *ch_info;
6082        struct ieee80211_conf *conf = &hw->conf;
6083        struct ieee80211_channel *channel = ch_switch->chandef.chan;
6084        struct il_ht_config *ht_conf = &il->current_ht_config;
6085        u16 ch;
6086
6087        D_MAC80211("enter\n");
6088
6089        mutex_lock(&il->mutex);
6090
6091        if (il_is_rfkill(il))
6092                goto out;
6093
6094        if (test_bit(S_EXIT_PENDING, &il->status) ||
6095            test_bit(S_SCANNING, &il->status) ||
6096            test_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
6097                goto out;
6098
6099        if (!il_is_associated(il))
6100                goto out;
6101
6102        if (!il->ops->set_channel_switch)
6103                goto out;
6104
6105        ch = channel->hw_value;
6106        if (le16_to_cpu(il->active.channel) == ch)
6107                goto out;
6108
6109        ch_info = il_get_channel_info(il, channel->band, ch);
6110        if (!il_is_channel_valid(ch_info)) {
6111                D_MAC80211("invalid channel\n");
6112                goto out;
6113        }
6114
6115        spin_lock_irq(&il->lock);
6116
6117        il->current_ht_config.smps = conf->smps_mode;
6118
6119        /* Configure HT40 channels */
6120        switch (cfg80211_get_chandef_type(&ch_switch->chandef)) {
6121        case NL80211_CHAN_NO_HT:
6122        case NL80211_CHAN_HT20:
6123                il->ht.is_40mhz = false;
6124                il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
6125                break;
6126        case NL80211_CHAN_HT40MINUS:
6127                il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
6128                il->ht.is_40mhz = true;
6129                break;
6130        case NL80211_CHAN_HT40PLUS:
6131                il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
6132                il->ht.is_40mhz = true;
6133                break;
6134        }
6135
6136        if ((le16_to_cpu(il->staging.channel) != ch))
6137                il->staging.flags = 0;
6138
6139        il_set_rxon_channel(il, channel);
6140        il_set_rxon_ht(il, ht_conf);
6141        il_set_flags_for_band(il, channel->band, il->vif);
6142
6143        spin_unlock_irq(&il->lock);
6144
6145        il_set_rate(il);
6146        /*
6147         * at this point, staging_rxon has the
6148         * configuration for channel switch
6149         */
6150        set_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
6151        il->switch_channel = cpu_to_le16(ch);
6152        if (il->ops->set_channel_switch(il, ch_switch)) {
6153                clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
6154                il->switch_channel = 0;
6155                ieee80211_chswitch_done(il->vif, false);
6156        }
6157
6158out:
6159        mutex_unlock(&il->mutex);
6160        D_MAC80211("leave\n");
6161}
6162
6163void
6164il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
6165                        unsigned int *total_flags, u64 multicast)
6166{
6167        struct il_priv *il = hw->priv;
6168        __le32 filter_or = 0, filter_nand = 0;
6169
6170#define CHK(test, flag) do { \
6171        if (*total_flags & (test))              \
6172                filter_or |= (flag);            \
6173        else                                    \
6174                filter_nand |= (flag);          \
6175        } while (0)
6176
6177        D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
6178                   *total_flags);
6179
6180        CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
6181        /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
6182        CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
6183        CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
6184
6185#undef CHK
6186
6187        mutex_lock(&il->mutex);
6188
6189        il->staging.filter_flags &= ~filter_nand;
6190        il->staging.filter_flags |= filter_or;
6191
6192        /*
6193         * Not committing directly because hardware can perform a scan,
6194         * but we'll eventually commit the filter flags change anyway.
6195         */
6196
6197        mutex_unlock(&il->mutex);
6198
6199        /*
6200         * Receiving all multicast frames is always enabled by the
6201         * default flags setup in il_connection_init_rx_config()
6202         * since we currently do not support programming multicast
6203         * filters into the device.
6204         */
6205        *total_flags &=
6206            FIF_OTHER_BSS | FIF_ALLMULTI |
6207            FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
6208}
6209
6210/*****************************************************************************
6211 *
6212 * driver setup and teardown
6213 *
6214 *****************************************************************************/
6215
6216static void
6217il4965_bg_txpower_work(struct work_struct *work)
6218{
6219        struct il_priv *il = container_of(work, struct il_priv,
6220                                          txpower_work);
6221
6222        mutex_lock(&il->mutex);
6223
6224        /* If a scan happened to start before we got here
6225         * then just return; the stats notification will
6226         * kick off another scheduled work to compensate for
6227         * any temperature delta we missed here. */
6228        if (test_bit(S_EXIT_PENDING, &il->status) ||
6229            test_bit(S_SCANNING, &il->status))
6230                goto out;
6231
6232        /* Regardless of if we are associated, we must reconfigure the
6233         * TX power since frames can be sent on non-radar channels while
6234         * not associated */
6235        il->ops->send_tx_power(il);
6236
6237        /* Update last_temperature to keep is_calib_needed from running
6238         * when it isn't needed... */
6239        il->last_temperature = il->temperature;
6240out:
6241        mutex_unlock(&il->mutex);
6242}
6243
6244static void
6245il4965_setup_deferred_work(struct il_priv *il)
6246{
6247        il->workqueue = create_singlethread_workqueue(DRV_NAME);
6248
6249        init_waitqueue_head(&il->wait_command_queue);
6250
6251        INIT_WORK(&il->restart, il4965_bg_restart);
6252        INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish);
6253        INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work);
6254        INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start);
6255        INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start);
6256
6257        il_setup_scan_deferred_work(il);
6258
6259        INIT_WORK(&il->txpower_work, il4965_bg_txpower_work);
6260
6261        setup_timer(&il->stats_periodic, il4965_bg_stats_periodic,
6262                    (unsigned long)il);
6263
6264        setup_timer(&il->watchdog, il_bg_watchdog, (unsigned long)il);
6265
6266        tasklet_init(&il->irq_tasklet,
6267                     (void (*)(unsigned long))il4965_irq_tasklet,
6268                     (unsigned long)il);
6269}
6270
6271static void
6272il4965_cancel_deferred_work(struct il_priv *il)
6273{
6274        cancel_work_sync(&il->txpower_work);
6275        cancel_delayed_work_sync(&il->init_alive_start);
6276        cancel_delayed_work(&il->alive_start);
6277        cancel_work_sync(&il->run_time_calib_work);
6278
6279        il_cancel_scan_deferred_work(il);
6280
6281        del_timer_sync(&il->stats_periodic);
6282}
6283
6284static void
6285il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
6286{
6287        int i;
6288
6289        for (i = 0; i < RATE_COUNT_LEGACY; i++) {
6290                rates[i].bitrate = il_rates[i].ieee * 5;
6291                rates[i].hw_value = i;  /* Rate scaling will work on idxes */
6292                rates[i].hw_value_short = i;
6293                rates[i].flags = 0;
6294                if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) {
6295                        /*
6296                         * If CCK != 1M then set short preamble rate flag.
6297                         */
6298                        rates[i].flags |=
6299                            (il_rates[i].plcp ==
6300                             RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
6301                }
6302        }
6303}
6304
6305/*
6306 * Acquire il->lock before calling this function !
6307 */
6308void
6309il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx)
6310{
6311        il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8));
6312        il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx);
6313}
6314
6315void
6316il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq,
6317                           int tx_fifo_id, int scd_retry)
6318{
6319        int txq_id = txq->q.id;
6320
6321        /* Find out whether to activate Tx queue */
6322        int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0;
6323
6324        /* Set up and activate */
6325        il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
6326                   (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
6327                   (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) |
6328                   (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) |
6329                   (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
6330                   IL49_SCD_QUEUE_STTS_REG_MSK);
6331
6332        txq->sched_retry = scd_retry;
6333
6334        D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate",
6335               scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
6336}
6337
6338static const struct ieee80211_ops il4965_mac_ops = {
6339        .tx = il4965_mac_tx,
6340        .start = il4965_mac_start,
6341        .stop = il4965_mac_stop,
6342        .add_interface = il_mac_add_interface,
6343        .remove_interface = il_mac_remove_interface,
6344        .change_interface = il_mac_change_interface,
6345        .config = il_mac_config,
6346        .configure_filter = il4965_configure_filter,
6347        .set_key = il4965_mac_set_key,
6348        .update_tkip_key = il4965_mac_update_tkip_key,
6349        .conf_tx = il_mac_conf_tx,
6350        .reset_tsf = il_mac_reset_tsf,
6351        .bss_info_changed = il_mac_bss_info_changed,
6352        .ampdu_action = il4965_mac_ampdu_action,
6353        .hw_scan = il_mac_hw_scan,
6354        .sta_add = il4965_mac_sta_add,
6355        .sta_remove = il_mac_sta_remove,
6356        .channel_switch = il4965_mac_channel_switch,
6357        .tx_last_beacon = il_mac_tx_last_beacon,
6358        .flush = il_mac_flush,
6359};
6360
6361static int
6362il4965_init_drv(struct il_priv *il)
6363{
6364        int ret;
6365
6366        spin_lock_init(&il->sta_lock);
6367        spin_lock_init(&il->hcmd_lock);
6368
6369        INIT_LIST_HEAD(&il->free_frames);
6370
6371        mutex_init(&il->mutex);
6372
6373        il->ieee_channels = NULL;
6374        il->ieee_rates = NULL;
6375        il->band = NL80211_BAND_2GHZ;
6376
6377        il->iw_mode = NL80211_IFTYPE_STATION;
6378        il->current_ht_config.smps = IEEE80211_SMPS_STATIC;
6379        il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
6380
6381        /* initialize force reset */
6382        il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
6383
6384        /* Choose which receivers/antennas to use */
6385        if (il->ops->set_rxon_chain)
6386                il->ops->set_rxon_chain(il);
6387
6388        il_init_scan_params(il);
6389
6390        ret = il_init_channel_map(il);
6391        if (ret) {
6392                IL_ERR("initializing regulatory failed: %d\n", ret);
6393                goto err;
6394        }
6395
6396        ret = il_init_geos(il);
6397        if (ret) {
6398                IL_ERR("initializing geos failed: %d\n", ret);
6399                goto err_free_channel_map;
6400        }
6401        il4965_init_hw_rates(il, il->ieee_rates);
6402
6403        return 0;
6404
6405err_free_channel_map:
6406        il_free_channel_map(il);
6407err:
6408        return ret;
6409}
6410
6411static void
6412il4965_uninit_drv(struct il_priv *il)
6413{
6414        il_free_geos(il);
6415        il_free_channel_map(il);
6416        kfree(il->scan_cmd);
6417}
6418
6419static void
6420il4965_hw_detect(struct il_priv *il)
6421{
6422        il->hw_rev = _il_rd(il, CSR_HW_REV);
6423        il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG);
6424        il->rev_id = il->pci_dev->revision;
6425        D_INFO("HW Revision ID = 0x%X\n", il->rev_id);
6426}
6427
6428static const struct il_sensitivity_ranges il4965_sensitivity = {
6429        .min_nrg_cck = 97,
6430        .max_nrg_cck = 0,       /* not used, set to 0 */
6431
6432        .auto_corr_min_ofdm = 85,
6433        .auto_corr_min_ofdm_mrc = 170,
6434        .auto_corr_min_ofdm_x1 = 105,
6435        .auto_corr_min_ofdm_mrc_x1 = 220,
6436
6437        .auto_corr_max_ofdm = 120,
6438        .auto_corr_max_ofdm_mrc = 210,
6439        .auto_corr_max_ofdm_x1 = 140,
6440        .auto_corr_max_ofdm_mrc_x1 = 270,
6441
6442        .auto_corr_min_cck = 125,
6443        .auto_corr_max_cck = 200,
6444        .auto_corr_min_cck_mrc = 200,
6445        .auto_corr_max_cck_mrc = 400,
6446
6447        .nrg_th_cck = 100,
6448        .nrg_th_ofdm = 100,
6449
6450        .barker_corr_th_min = 190,
6451        .barker_corr_th_min_mrc = 390,
6452        .nrg_th_cca = 62,
6453};
6454
6455static void
6456il4965_set_hw_params(struct il_priv *il)
6457{
6458        il->hw_params.bcast_id = IL4965_BROADCAST_ID;
6459        il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
6460        il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
6461        if (il->cfg->mod_params->amsdu_size_8K)
6462                il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K);
6463        else
6464                il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K);
6465
6466        il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL;
6467
6468        if (il->cfg->mod_params->disable_11n)
6469                il->cfg->sku &= ~IL_SKU_N;
6470
6471        if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
6472            il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
6473                il->cfg->num_of_queues =
6474                    il->cfg->mod_params->num_of_queues;
6475
6476        il->hw_params.max_txq_num = il->cfg->num_of_queues;
6477        il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
6478        il->hw_params.scd_bc_tbls_size =
6479            il->cfg->num_of_queues *
6480            sizeof(struct il4965_scd_bc_tbl);
6481
6482        il->hw_params.tfd_size = sizeof(struct il_tfd);
6483        il->hw_params.max_stations = IL4965_STATION_COUNT;
6484        il->hw_params.max_data_size = IL49_RTC_DATA_SIZE;
6485        il->hw_params.max_inst_size = IL49_RTC_INST_SIZE;
6486        il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
6487        il->hw_params.ht40_channel = BIT(NL80211_BAND_5GHZ);
6488
6489        il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR;
6490
6491        il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
6492        il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
6493        il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant;
6494        il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant;
6495
6496        il->hw_params.ct_kill_threshold =
6497           CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
6498
6499        il->hw_params.sens = &il4965_sensitivity;
6500        il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS;
6501}
6502
6503static int
6504il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
6505{
6506        int err = 0;
6507        struct il_priv *il;
6508        struct ieee80211_hw *hw;
6509        struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
6510        unsigned long flags;
6511        u16 pci_cmd;
6512
6513        /************************
6514         * 1. Allocating HW data
6515         ************************/
6516
6517        hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops);
6518        if (!hw) {
6519                err = -ENOMEM;
6520                goto out;
6521        }
6522        il = hw->priv;
6523        il->hw = hw;
6524        SET_IEEE80211_DEV(hw, &pdev->dev);
6525
6526        D_INFO("*** LOAD DRIVER ***\n");
6527        il->cfg = cfg;
6528        il->ops = &il4965_ops;
6529#ifdef CONFIG_IWLEGACY_DEBUGFS
6530        il->debugfs_ops = &il4965_debugfs_ops;
6531#endif
6532        il->pci_dev = pdev;
6533        il->inta_mask = CSR_INI_SET_MASK;
6534
6535        /**************************
6536         * 2. Initializing PCI bus
6537         **************************/
6538        pci_disable_link_state(pdev,
6539                               PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
6540                               PCIE_LINK_STATE_CLKPM);
6541
6542        if (pci_enable_device(pdev)) {
6543                err = -ENODEV;
6544                goto out_ieee80211_free_hw;
6545        }
6546
6547        pci_set_master(pdev);
6548
6549        err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
6550        if (!err)
6551                err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
6552        if (err) {
6553                err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
6554                if (!err)
6555                        err =
6556                            pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
6557                /* both attempts failed: */
6558                if (err) {
6559                        IL_WARN("No suitable DMA available.\n");
6560                        goto out_pci_disable_device;
6561                }
6562        }
6563
6564        err = pci_request_regions(pdev, DRV_NAME);
6565        if (err)
6566                goto out_pci_disable_device;
6567
6568        pci_set_drvdata(pdev, il);
6569
6570        /***********************
6571         * 3. Read REV register
6572         ***********************/
6573        il->hw_base = pci_ioremap_bar(pdev, 0);
6574        if (!il->hw_base) {
6575                err = -ENODEV;
6576                goto out_pci_release_regions;
6577        }
6578
6579        D_INFO("pci_resource_len = 0x%08llx\n",
6580               (unsigned long long)pci_resource_len(pdev, 0));
6581        D_INFO("pci_resource_base = %p\n", il->hw_base);
6582
6583        /* these spin locks will be used in apm_ops.init and EEPROM access
6584         * we should init now
6585         */
6586        spin_lock_init(&il->reg_lock);
6587        spin_lock_init(&il->lock);
6588
6589        /*
6590         * stop and reset the on-board processor just in case it is in a
6591         * strange state ... like being left stranded by a primary kernel
6592         * and this is now the kdump kernel trying to start up
6593         */
6594        _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
6595
6596        il4965_hw_detect(il);
6597        IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev);
6598
6599        /* We disable the RETRY_TIMEOUT register (0x41) to keep
6600         * PCI Tx retries from interfering with C3 CPU state */
6601        pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
6602
6603        il4965_prepare_card_hw(il);
6604        if (!il->hw_ready) {
6605                IL_WARN("Failed, HW not ready\n");
6606                err = -EIO;
6607                goto out_iounmap;
6608        }
6609
6610        /*****************
6611         * 4. Read EEPROM
6612         *****************/
6613        /* Read the EEPROM */
6614        err = il_eeprom_init(il);
6615        if (err) {
6616                IL_ERR("Unable to init EEPROM\n");
6617                goto out_iounmap;
6618        }
6619        err = il4965_eeprom_check_version(il);
6620        if (err)
6621                goto out_free_eeprom;
6622
6623        /* extract MAC Address */
6624        il4965_eeprom_get_mac(il, il->addresses[0].addr);
6625        D_INFO("MAC address: %pM\n", il->addresses[0].addr);
6626        il->hw->wiphy->addresses = il->addresses;
6627        il->hw->wiphy->n_addresses = 1;
6628
6629        /************************
6630         * 5. Setup HW constants
6631         ************************/
6632        il4965_set_hw_params(il);
6633
6634        /*******************
6635         * 6. Setup il
6636         *******************/
6637
6638        err = il4965_init_drv(il);
6639        if (err)
6640                goto out_free_eeprom;
6641        /* At this point both hw and il are initialized. */
6642
6643        /********************
6644         * 7. Setup services
6645         ********************/
6646        spin_lock_irqsave(&il->lock, flags);
6647        il_disable_interrupts(il);
6648        spin_unlock_irqrestore(&il->lock, flags);
6649
6650        pci_enable_msi(il->pci_dev);
6651
6652        err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
6653        if (err) {
6654                IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
6655                goto out_disable_msi;
6656        }
6657
6658        il4965_setup_deferred_work(il);
6659        il4965_setup_handlers(il);
6660
6661        /*********************************************
6662         * 8. Enable interrupts and read RFKILL state
6663         *********************************************/
6664
6665        /* enable rfkill interrupt: hw bug w/a */
6666        pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd);
6667        if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
6668                pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
6669                pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd);
6670        }
6671
6672        il_enable_rfkill_int(il);
6673
6674        /* If platform's RF_KILL switch is NOT set to KILL */
6675        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
6676                clear_bit(S_RFKILL, &il->status);
6677        else
6678                set_bit(S_RFKILL, &il->status);
6679
6680        wiphy_rfkill_set_hw_state(il->hw->wiphy,
6681                                  test_bit(S_RFKILL, &il->status));
6682
6683        il_power_initialize(il);
6684
6685        init_completion(&il->_4965.firmware_loading_complete);
6686
6687        err = il4965_request_firmware(il, true);
6688        if (err)
6689                goto out_destroy_workqueue;
6690
6691        return 0;
6692
6693out_destroy_workqueue:
6694        destroy_workqueue(il->workqueue);
6695        il->workqueue = NULL;
6696        free_irq(il->pci_dev->irq, il);
6697out_disable_msi:
6698        pci_disable_msi(il->pci_dev);
6699        il4965_uninit_drv(il);
6700out_free_eeprom:
6701        il_eeprom_free(il);
6702out_iounmap:
6703        iounmap(il->hw_base);
6704out_pci_release_regions:
6705        pci_release_regions(pdev);
6706out_pci_disable_device:
6707        pci_disable_device(pdev);
6708out_ieee80211_free_hw:
6709        ieee80211_free_hw(il->hw);
6710out:
6711        return err;
6712}
6713
6714static void
6715il4965_pci_remove(struct pci_dev *pdev)
6716{
6717        struct il_priv *il = pci_get_drvdata(pdev);
6718        unsigned long flags;
6719
6720        if (!il)
6721                return;
6722
6723        wait_for_completion(&il->_4965.firmware_loading_complete);
6724
6725        D_INFO("*** UNLOAD DRIVER ***\n");
6726
6727        il_dbgfs_unregister(il);
6728        sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group);
6729
6730        /* ieee80211_unregister_hw call wil cause il_mac_stop to
6731         * to be called and il4965_down since we are removing the device
6732         * we need to set S_EXIT_PENDING bit.
6733         */
6734        set_bit(S_EXIT_PENDING, &il->status);
6735
6736        il_leds_exit(il);
6737
6738        if (il->mac80211_registered) {
6739                ieee80211_unregister_hw(il->hw);
6740                il->mac80211_registered = 0;
6741        } else {
6742                il4965_down(il);
6743        }
6744
6745        /*
6746         * Make sure device is reset to low power before unloading driver.
6747         * This may be redundant with il4965_down(), but there are paths to
6748         * run il4965_down() without calling apm_ops.stop(), and there are
6749         * paths to avoid running il4965_down() at all before leaving driver.
6750         * This (inexpensive) call *makes sure* device is reset.
6751         */
6752        il_apm_stop(il);
6753
6754        /* make sure we flush any pending irq or
6755         * tasklet for the driver
6756         */
6757        spin_lock_irqsave(&il->lock, flags);
6758        il_disable_interrupts(il);
6759        spin_unlock_irqrestore(&il->lock, flags);
6760
6761        il4965_synchronize_irq(il);
6762
6763        il4965_dealloc_ucode_pci(il);
6764
6765        if (il->rxq.bd)
6766                il4965_rx_queue_free(il, &il->rxq);
6767        il4965_hw_txq_ctx_free(il);
6768
6769        il_eeprom_free(il);
6770
6771        /*netif_stop_queue(dev); */
6772        flush_workqueue(il->workqueue);
6773
6774        /* ieee80211_unregister_hw calls il_mac_stop, which flushes
6775         * il->workqueue... so we can't take down the workqueue
6776         * until now... */
6777        destroy_workqueue(il->workqueue);
6778        il->workqueue = NULL;
6779
6780        free_irq(il->pci_dev->irq, il);
6781        pci_disable_msi(il->pci_dev);
6782        iounmap(il->hw_base);
6783        pci_release_regions(pdev);
6784        pci_disable_device(pdev);
6785
6786        il4965_uninit_drv(il);
6787
6788        dev_kfree_skb(il->beacon_skb);
6789
6790        ieee80211_free_hw(il->hw);
6791}
6792
6793/*
6794 * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
6795 * must be called under il->lock and mac access
6796 */
6797void
6798il4965_txq_set_sched(struct il_priv *il, u32 mask)
6799{
6800        il_wr_prph(il, IL49_SCD_TXFACT, mask);
6801}
6802
6803/*****************************************************************************
6804 *
6805 * driver and module entry point
6806 *
6807 *****************************************************************************/
6808
6809/* Hardware specific file defines the PCI IDs table for that hardware module */
6810static const struct pci_device_id il4965_hw_card_ids[] = {
6811        {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)},
6812        {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)},
6813        {0}
6814};
6815MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids);
6816
6817static struct pci_driver il4965_driver = {
6818        .name = DRV_NAME,
6819        .id_table = il4965_hw_card_ids,
6820        .probe = il4965_pci_probe,
6821        .remove = il4965_pci_remove,
6822        .driver.pm = IL_LEGACY_PM_OPS,
6823};
6824
6825static int __init
6826il4965_init(void)
6827{
6828
6829        int ret;
6830        pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
6831        pr_info(DRV_COPYRIGHT "\n");
6832
6833        ret = il4965_rate_control_register();
6834        if (ret) {
6835                pr_err("Unable to register rate control algorithm: %d\n", ret);
6836                return ret;
6837        }
6838
6839        ret = pci_register_driver(&il4965_driver);
6840        if (ret) {
6841                pr_err("Unable to initialize PCI module\n");
6842                goto error_register;
6843        }
6844
6845        return ret;
6846
6847error_register:
6848        il4965_rate_control_unregister();
6849        return ret;
6850}
6851
6852static void __exit
6853il4965_exit(void)
6854{
6855        pci_unregister_driver(&il4965_driver);
6856        il4965_rate_control_unregister();
6857}
6858
6859module_exit(il4965_exit);
6860module_init(il4965_init);
6861
6862#ifdef CONFIG_IWLEGACY_DEBUG
6863module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
6864MODULE_PARM_DESC(debug, "debug output mask");
6865#endif
6866
6867module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, S_IRUGO);
6868MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
6869module_param_named(queues_num, il4965_mod_params.num_of_queues, int, S_IRUGO);
6870MODULE_PARM_DESC(queues_num, "number of hw queues.");
6871module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO);
6872MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
6873module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int,
6874                   S_IRUGO);
6875MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])");
6876module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO);
6877MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
6878