linux/drivers/scsi/pm8001/pm8001_sas.c
<<
>>
Prefs
   1/*
   2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
   3 *
   4 * Copyright (c) 2008-2009 USI Co., Ltd.
   5 * All rights reserved.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions, and the following disclaimer,
  12 *    without modification.
  13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  14 *    substantially similar to the "NO WARRANTY" disclaimer below
  15 *    ("Disclaimer") and any redistribution must be conditioned upon
  16 *    including a substantially similar Disclaimer requirement for further
  17 *    binary redistribution.
  18 * 3. Neither the names of the above-listed copyright holders nor the names
  19 *    of any contributors may be used to endorse or promote products derived
  20 *    from this software without specific prior written permission.
  21 *
  22 * Alternatively, this software may be distributed under the terms of the
  23 * GNU General Public License ("GPL") version 2 as published by the Free
  24 * Software Foundation.
  25 *
  26 * NO WARRANTY
  27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  37 * POSSIBILITY OF SUCH DAMAGES.
  38 *
  39 */
  40
  41#include <linux/slab.h>
  42#include "pm8001_sas.h"
  43
  44/**
  45 * pm8001_find_tag - from sas task to find out  tag that belongs to this task
  46 * @task: the task sent to the LLDD
  47 * @tag: the found tag associated with the task
  48 */
  49static int pm8001_find_tag(struct sas_task *task, u32 *tag)
  50{
  51        if (task->lldd_task) {
  52                struct pm8001_ccb_info *ccb;
  53                ccb = task->lldd_task;
  54                *tag = ccb->ccb_tag;
  55                return 1;
  56        }
  57        return 0;
  58}
  59
  60/**
  61  * pm8001_tag_free - free the no more needed tag
  62  * @pm8001_ha: our hba struct
  63  * @tag: the found tag associated with the task
  64  */
  65void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
  66{
  67        void *bitmap = pm8001_ha->tags;
  68        clear_bit(tag, bitmap);
  69}
  70
  71/**
  72  * pm8001_tag_alloc - allocate a empty tag for task used.
  73  * @pm8001_ha: our hba struct
  74  * @tag_out: the found empty tag .
  75  */
  76inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
  77{
  78        unsigned int tag;
  79        void *bitmap = pm8001_ha->tags;
  80        unsigned long flags;
  81
  82        spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
  83        tag = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
  84        if (tag >= pm8001_ha->tags_num) {
  85                spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
  86                return -SAS_QUEUE_FULL;
  87        }
  88        set_bit(tag, bitmap);
  89        spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
  90        *tag_out = tag;
  91        return 0;
  92}
  93
  94void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
  95{
  96        int i;
  97        for (i = 0; i < pm8001_ha->tags_num; ++i)
  98                pm8001_tag_free(pm8001_ha, i);
  99}
 100
 101 /**
 102  * pm8001_mem_alloc - allocate memory for pm8001.
 103  * @pdev: pci device.
 104  * @virt_addr: the allocated virtual address
 105  * @pphys_addr_hi: the physical address high byte address.
 106  * @pphys_addr_lo: the physical address low byte address.
 107  * @mem_size: memory size.
 108  */
 109int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
 110        dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
 111        u32 *pphys_addr_lo, u32 mem_size, u32 align)
 112{
 113        caddr_t mem_virt_alloc;
 114        dma_addr_t mem_dma_handle;
 115        u64 phys_align;
 116        u64 align_offset = 0;
 117        if (align)
 118                align_offset = (dma_addr_t)align - 1;
 119        mem_virt_alloc = pci_zalloc_consistent(pdev, mem_size + align,
 120                                               &mem_dma_handle);
 121        if (!mem_virt_alloc) {
 122                pm8001_printk("memory allocation error\n");
 123                return -1;
 124        }
 125        *pphys_addr = mem_dma_handle;
 126        phys_align = (*pphys_addr + align_offset) & ~align_offset;
 127        *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
 128        *pphys_addr_hi = upper_32_bits(phys_align);
 129        *pphys_addr_lo = lower_32_bits(phys_align);
 130        return 0;
 131}
 132/**
 133  * pm8001_find_ha_by_dev - from domain device which come from sas layer to
 134  * find out our hba struct.
 135  * @dev: the domain device which from sas layer.
 136  */
 137static
 138struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
 139{
 140        struct sas_ha_struct *sha = dev->port->ha;
 141        struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 142        return pm8001_ha;
 143}
 144
 145/**
 146  * pm8001_phy_control - this function should be registered to
 147  * sas_domain_function_template to provide libsas used, note: this is just
 148  * control the HBA phy rather than other expander phy if you want control
 149  * other phy, you should use SMP command.
 150  * @sas_phy: which phy in HBA phys.
 151  * @func: the operation.
 152  * @funcdata: always NULL.
 153  */
 154int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
 155        void *funcdata)
 156{
 157        int rc = 0, phy_id = sas_phy->id;
 158        struct pm8001_hba_info *pm8001_ha = NULL;
 159        struct sas_phy_linkrates *rates;
 160        DECLARE_COMPLETION_ONSTACK(completion);
 161        unsigned long flags;
 162        pm8001_ha = sas_phy->ha->lldd_ha;
 163        pm8001_ha->phy[phy_id].enable_completion = &completion;
 164        switch (func) {
 165        case PHY_FUNC_SET_LINK_RATE:
 166                rates = funcdata;
 167                if (rates->minimum_linkrate) {
 168                        pm8001_ha->phy[phy_id].minimum_linkrate =
 169                                rates->minimum_linkrate;
 170                }
 171                if (rates->maximum_linkrate) {
 172                        pm8001_ha->phy[phy_id].maximum_linkrate =
 173                                rates->maximum_linkrate;
 174                }
 175                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 176                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 177                        wait_for_completion(&completion);
 178                }
 179                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 180                                              PHY_LINK_RESET);
 181                break;
 182        case PHY_FUNC_HARD_RESET:
 183                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 184                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 185                        wait_for_completion(&completion);
 186                }
 187                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 188                                              PHY_HARD_RESET);
 189                break;
 190        case PHY_FUNC_LINK_RESET:
 191                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 192                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 193                        wait_for_completion(&completion);
 194                }
 195                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 196                                              PHY_LINK_RESET);
 197                break;
 198        case PHY_FUNC_RELEASE_SPINUP_HOLD:
 199                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 200                                              PHY_LINK_RESET);
 201                break;
 202        case PHY_FUNC_DISABLE:
 203                PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
 204                break;
 205        case PHY_FUNC_GET_EVENTS:
 206                spin_lock_irqsave(&pm8001_ha->lock, flags);
 207                if (pm8001_ha->chip_id == chip_8001) {
 208                        if (-1 == pm8001_bar4_shift(pm8001_ha,
 209                                        (phy_id < 4) ? 0x30000 : 0x40000)) {
 210                                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 211                                return -EINVAL;
 212                        }
 213                }
 214                {
 215                        struct sas_phy *phy = sas_phy->phy;
 216                        uint32_t *qp = (uint32_t *)(((char *)
 217                                pm8001_ha->io_mem[2].memvirtaddr)
 218                                + 0x1034 + (0x4000 * (phy_id & 3)));
 219
 220                        phy->invalid_dword_count = qp[0];
 221                        phy->running_disparity_error_count = qp[1];
 222                        phy->loss_of_dword_sync_count = qp[3];
 223                        phy->phy_reset_problem_count = qp[4];
 224                }
 225                if (pm8001_ha->chip_id == chip_8001)
 226                        pm8001_bar4_shift(pm8001_ha, 0);
 227                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 228                return 0;
 229        default:
 230                rc = -EOPNOTSUPP;
 231        }
 232        msleep(300);
 233        return rc;
 234}
 235
 236/**
 237  * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
 238  * command to HBA.
 239  * @shost: the scsi host data.
 240  */
 241void pm8001_scan_start(struct Scsi_Host *shost)
 242{
 243        int i;
 244        struct pm8001_hba_info *pm8001_ha;
 245        struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 246        pm8001_ha = sha->lldd_ha;
 247        /* SAS_RE_INITIALIZATION not available in SPCv/ve */
 248        if (pm8001_ha->chip_id == chip_8001)
 249                PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
 250        for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
 251                PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
 252}
 253
 254int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
 255{
 256        struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
 257
 258        /* give the phy enabling interrupt event time to come in (1s
 259        * is empirically about all it takes) */
 260        if (time < HZ)
 261                return 0;
 262        /* Wait for discovery to finish */
 263        sas_drain_work(ha);
 264        return 1;
 265}
 266
 267/**
 268  * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
 269  * @pm8001_ha: our hba card information
 270  * @ccb: the ccb which attached to smp task
 271  */
 272static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
 273        struct pm8001_ccb_info *ccb)
 274{
 275        return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
 276}
 277
 278u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
 279{
 280        struct ata_queued_cmd *qc = task->uldd_task;
 281        if (qc) {
 282                if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
 283                    qc->tf.command == ATA_CMD_FPDMA_READ ||
 284                    qc->tf.command == ATA_CMD_FPDMA_RECV ||
 285                    qc->tf.command == ATA_CMD_FPDMA_SEND ||
 286                    qc->tf.command == ATA_CMD_NCQ_NON_DATA) {
 287                        *tag = qc->tag;
 288                        return 1;
 289                }
 290        }
 291        return 0;
 292}
 293
 294/**
 295  * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
 296  * @pm8001_ha: our hba card information
 297  * @ccb: the ccb which attached to sata task
 298  */
 299static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
 300        struct pm8001_ccb_info *ccb)
 301{
 302        return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
 303}
 304
 305/**
 306  * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
 307  * @pm8001_ha: our hba card information
 308  * @ccb: the ccb which attached to TM
 309  * @tmf: the task management IU
 310  */
 311static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
 312        struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
 313{
 314        return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
 315}
 316
 317/**
 318  * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
 319  * @pm8001_ha: our hba card information
 320  * @ccb: the ccb which attached to ssp task
 321  */
 322static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
 323        struct pm8001_ccb_info *ccb)
 324{
 325        return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
 326}
 327
 328 /* Find the local port id that's attached to this device */
 329static int sas_find_local_port_id(struct domain_device *dev)
 330{
 331        struct domain_device *pdev = dev->parent;
 332
 333        /* Directly attached device */
 334        if (!pdev)
 335                return dev->port->id;
 336        while (pdev) {
 337                struct domain_device *pdev_p = pdev->parent;
 338                if (!pdev_p)
 339                        return pdev->port->id;
 340                pdev = pdev->parent;
 341        }
 342        return 0;
 343}
 344
 345/**
 346  * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
 347  * @task: the task to be execute.
 348  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
 349  * we always execute one one time.
 350  * @gfp_flags: gfp_flags.
 351  * @is_tmf: if it is task management task.
 352  * @tmf: the task management IU
 353  */
 354#define DEV_IS_GONE(pm8001_dev) \
 355        ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
 356static int pm8001_task_exec(struct sas_task *task,
 357        gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
 358{
 359        struct domain_device *dev = task->dev;
 360        struct pm8001_hba_info *pm8001_ha;
 361        struct pm8001_device *pm8001_dev;
 362        struct pm8001_port *port = NULL;
 363        struct sas_task *t = task;
 364        struct pm8001_ccb_info *ccb;
 365        u32 tag = 0xdeadbeef, rc, n_elem = 0;
 366        unsigned long flags = 0;
 367
 368        if (!dev->port) {
 369                struct task_status_struct *tsm = &t->task_status;
 370                tsm->resp = SAS_TASK_UNDELIVERED;
 371                tsm->stat = SAS_PHY_DOWN;
 372                if (dev->dev_type != SAS_SATA_DEV)
 373                        t->task_done(t);
 374                return 0;
 375        }
 376        pm8001_ha = pm8001_find_ha_by_dev(task->dev);
 377        PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
 378        spin_lock_irqsave(&pm8001_ha->lock, flags);
 379        do {
 380                dev = t->dev;
 381                pm8001_dev = dev->lldd_dev;
 382                port = &pm8001_ha->port[sas_find_local_port_id(dev)];
 383                if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
 384                        if (sas_protocol_ata(t->task_proto)) {
 385                                struct task_status_struct *ts = &t->task_status;
 386                                ts->resp = SAS_TASK_UNDELIVERED;
 387                                ts->stat = SAS_PHY_DOWN;
 388
 389                                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 390                                t->task_done(t);
 391                                spin_lock_irqsave(&pm8001_ha->lock, flags);
 392                                continue;
 393                        } else {
 394                                struct task_status_struct *ts = &t->task_status;
 395                                ts->resp = SAS_TASK_UNDELIVERED;
 396                                ts->stat = SAS_PHY_DOWN;
 397                                t->task_done(t);
 398                                continue;
 399                        }
 400                }
 401                rc = pm8001_tag_alloc(pm8001_ha, &tag);
 402                if (rc)
 403                        goto err_out;
 404                ccb = &pm8001_ha->ccb_info[tag];
 405
 406                if (!sas_protocol_ata(t->task_proto)) {
 407                        if (t->num_scatter) {
 408                                n_elem = dma_map_sg(pm8001_ha->dev,
 409                                        t->scatter,
 410                                        t->num_scatter,
 411                                        t->data_dir);
 412                                if (!n_elem) {
 413                                        rc = -ENOMEM;
 414                                        goto err_out_tag;
 415                                }
 416                        }
 417                } else {
 418                        n_elem = t->num_scatter;
 419                }
 420
 421                t->lldd_task = ccb;
 422                ccb->n_elem = n_elem;
 423                ccb->ccb_tag = tag;
 424                ccb->task = t;
 425                ccb->device = pm8001_dev;
 426                switch (t->task_proto) {
 427                case SAS_PROTOCOL_SMP:
 428                        rc = pm8001_task_prep_smp(pm8001_ha, ccb);
 429                        break;
 430                case SAS_PROTOCOL_SSP:
 431                        if (is_tmf)
 432                                rc = pm8001_task_prep_ssp_tm(pm8001_ha,
 433                                        ccb, tmf);
 434                        else
 435                                rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
 436                        break;
 437                case SAS_PROTOCOL_SATA:
 438                case SAS_PROTOCOL_STP:
 439                        rc = pm8001_task_prep_ata(pm8001_ha, ccb);
 440                        break;
 441                default:
 442                        dev_printk(KERN_ERR, pm8001_ha->dev,
 443                                "unknown sas_task proto: 0x%x\n",
 444                                t->task_proto);
 445                        rc = -EINVAL;
 446                        break;
 447                }
 448
 449                if (rc) {
 450                        PM8001_IO_DBG(pm8001_ha,
 451                                pm8001_printk("rc is %x\n", rc));
 452                        goto err_out_tag;
 453                }
 454                /* TODO: select normal or high priority */
 455                spin_lock(&t->task_state_lock);
 456                t->task_state_flags |= SAS_TASK_AT_INITIATOR;
 457                spin_unlock(&t->task_state_lock);
 458                pm8001_dev->running_req++;
 459        } while (0);
 460        rc = 0;
 461        goto out_done;
 462
 463err_out_tag:
 464        pm8001_tag_free(pm8001_ha, tag);
 465err_out:
 466        dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
 467        if (!sas_protocol_ata(t->task_proto))
 468                if (n_elem)
 469                        dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
 470                                t->data_dir);
 471out_done:
 472        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 473        return rc;
 474}
 475
 476/**
 477  * pm8001_queue_command - register for upper layer used, all IO commands sent
 478  * to HBA are from this interface.
 479  * @task: the task to be execute.
 480  * @gfp_flags: gfp_flags
 481  */
 482int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
 483{
 484        return pm8001_task_exec(task, gfp_flags, 0, NULL);
 485}
 486
 487/**
 488  * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
 489  * @pm8001_ha: our hba card information
 490  * @ccb: the ccb which attached to ssp task
 491  * @task: the task to be free.
 492  * @ccb_idx: ccb index.
 493  */
 494void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
 495        struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
 496{
 497        if (!ccb->task)
 498                return;
 499        if (!sas_protocol_ata(task->task_proto))
 500                if (ccb->n_elem)
 501                        dma_unmap_sg(pm8001_ha->dev, task->scatter,
 502                                task->num_scatter, task->data_dir);
 503
 504        switch (task->task_proto) {
 505        case SAS_PROTOCOL_SMP:
 506                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
 507                        PCI_DMA_FROMDEVICE);
 508                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
 509                        PCI_DMA_TODEVICE);
 510                break;
 511
 512        case SAS_PROTOCOL_SATA:
 513        case SAS_PROTOCOL_STP:
 514        case SAS_PROTOCOL_SSP:
 515        default:
 516                /* do nothing */
 517                break;
 518        }
 519        task->lldd_task = NULL;
 520        ccb->task = NULL;
 521        ccb->ccb_tag = 0xFFFFFFFF;
 522        ccb->open_retry = 0;
 523        pm8001_tag_free(pm8001_ha, ccb_idx);
 524}
 525
 526 /**
 527  * pm8001_alloc_dev - find a empty pm8001_device
 528  * @pm8001_ha: our hba card information
 529  */
 530static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
 531{
 532        u32 dev;
 533        for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
 534                if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
 535                        pm8001_ha->devices[dev].id = dev;
 536                        return &pm8001_ha->devices[dev];
 537                }
 538        }
 539        if (dev == PM8001_MAX_DEVICES) {
 540                PM8001_FAIL_DBG(pm8001_ha,
 541                        pm8001_printk("max support %d devices, ignore ..\n",
 542                        PM8001_MAX_DEVICES));
 543        }
 544        return NULL;
 545}
 546/**
 547  * pm8001_find_dev - find a matching pm8001_device
 548  * @pm8001_ha: our hba card information
 549  */
 550struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
 551                                        u32 device_id)
 552{
 553        u32 dev;
 554        for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
 555                if (pm8001_ha->devices[dev].device_id == device_id)
 556                        return &pm8001_ha->devices[dev];
 557        }
 558        if (dev == PM8001_MAX_DEVICES) {
 559                PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
 560                                "DEVICE FOUND !!!\n"));
 561        }
 562        return NULL;
 563}
 564
 565static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
 566{
 567        u32 id = pm8001_dev->id;
 568        memset(pm8001_dev, 0, sizeof(*pm8001_dev));
 569        pm8001_dev->id = id;
 570        pm8001_dev->dev_type = SAS_PHY_UNUSED;
 571        pm8001_dev->device_id = PM8001_MAX_DEVICES;
 572        pm8001_dev->sas_device = NULL;
 573}
 574
 575/**
 576  * pm8001_dev_found_notify - libsas notify a device is found.
 577  * @dev: the device structure which sas layer used.
 578  *
 579  * when libsas find a sas domain device, it should tell the LLDD that
 580  * device is found, and then LLDD register this device to HBA firmware
 581  * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
 582  * device ID(according to device's sas address) and returned it to LLDD. From
 583  * now on, we communicate with HBA FW with the device ID which HBA assigned
 584  * rather than sas address. it is the necessary step for our HBA but it is
 585  * the optional for other HBA driver.
 586  */
 587static int pm8001_dev_found_notify(struct domain_device *dev)
 588{
 589        unsigned long flags = 0;
 590        int res = 0;
 591        struct pm8001_hba_info *pm8001_ha = NULL;
 592        struct domain_device *parent_dev = dev->parent;
 593        struct pm8001_device *pm8001_device;
 594        DECLARE_COMPLETION_ONSTACK(completion);
 595        u32 flag = 0;
 596        pm8001_ha = pm8001_find_ha_by_dev(dev);
 597        spin_lock_irqsave(&pm8001_ha->lock, flags);
 598
 599        pm8001_device = pm8001_alloc_dev(pm8001_ha);
 600        if (!pm8001_device) {
 601                res = -1;
 602                goto found_out;
 603        }
 604        pm8001_device->sas_device = dev;
 605        dev->lldd_dev = pm8001_device;
 606        pm8001_device->dev_type = dev->dev_type;
 607        pm8001_device->dcompletion = &completion;
 608        if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
 609                int phy_id;
 610                struct ex_phy *phy;
 611                for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
 612                phy_id++) {
 613                        phy = &parent_dev->ex_dev.ex_phy[phy_id];
 614                        if (SAS_ADDR(phy->attached_sas_addr)
 615                                == SAS_ADDR(dev->sas_addr)) {
 616                                pm8001_device->attached_phy = phy_id;
 617                                break;
 618                        }
 619                }
 620                if (phy_id == parent_dev->ex_dev.num_phys) {
 621                        PM8001_FAIL_DBG(pm8001_ha,
 622                        pm8001_printk("Error: no attached dev:%016llx"
 623                        " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
 624                                SAS_ADDR(parent_dev->sas_addr)));
 625                        res = -1;
 626                }
 627        } else {
 628                if (dev->dev_type == SAS_SATA_DEV) {
 629                        pm8001_device->attached_phy =
 630                                dev->rphy->identify.phy_identifier;
 631                                flag = 1; /* directly sata*/
 632                }
 633        } /*register this device to HBA*/
 634        PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
 635        PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
 636        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 637        wait_for_completion(&completion);
 638        if (dev->dev_type == SAS_END_DEVICE)
 639                msleep(50);
 640        pm8001_ha->flags = PM8001F_RUN_TIME;
 641        return 0;
 642found_out:
 643        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 644        return res;
 645}
 646
 647int pm8001_dev_found(struct domain_device *dev)
 648{
 649        return pm8001_dev_found_notify(dev);
 650}
 651
 652void pm8001_task_done(struct sas_task *task)
 653{
 654        if (!del_timer(&task->slow_task->timer))
 655                return;
 656        complete(&task->slow_task->completion);
 657}
 658
 659static void pm8001_tmf_timedout(unsigned long data)
 660{
 661        struct sas_task *task = (struct sas_task *)data;
 662
 663        task->task_state_flags |= SAS_TASK_STATE_ABORTED;
 664        complete(&task->slow_task->completion);
 665}
 666
 667#define PM8001_TASK_TIMEOUT 20
 668/**
 669  * pm8001_exec_internal_tmf_task - execute some task management commands.
 670  * @dev: the wanted device.
 671  * @tmf: which task management wanted to be take.
 672  * @para_len: para_len.
 673  * @parameter: ssp task parameter.
 674  *
 675  * when errors or exception happened, we may want to do something, for example
 676  * abort the issued task which result in this execption, it is done by calling
 677  * this function, note it is also with the task execute interface.
 678  */
 679static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
 680        void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
 681{
 682        int res, retry;
 683        struct sas_task *task = NULL;
 684        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
 685        struct pm8001_device *pm8001_dev = dev->lldd_dev;
 686        DECLARE_COMPLETION_ONSTACK(completion_setstate);
 687
 688        for (retry = 0; retry < 3; retry++) {
 689                task = sas_alloc_slow_task(GFP_KERNEL);
 690                if (!task)
 691                        return -ENOMEM;
 692
 693                task->dev = dev;
 694                task->task_proto = dev->tproto;
 695                memcpy(&task->ssp_task, parameter, para_len);
 696                task->task_done = pm8001_task_done;
 697                task->slow_task->timer.data = (unsigned long)task;
 698                task->slow_task->timer.function = pm8001_tmf_timedout;
 699                task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
 700                add_timer(&task->slow_task->timer);
 701
 702                res = pm8001_task_exec(task, GFP_KERNEL, 1, tmf);
 703
 704                if (res) {
 705                        del_timer(&task->slow_task->timer);
 706                        PM8001_FAIL_DBG(pm8001_ha,
 707                                pm8001_printk("Executing internal task "
 708                                "failed\n"));
 709                        goto ex_err;
 710                }
 711                wait_for_completion(&task->slow_task->completion);
 712                if (pm8001_ha->chip_id != chip_8001) {
 713                        pm8001_dev->setds_completion = &completion_setstate;
 714                                PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 715                                        pm8001_dev, 0x01);
 716                        wait_for_completion(&completion_setstate);
 717                }
 718                res = -TMF_RESP_FUNC_FAILED;
 719                /* Even TMF timed out, return direct. */
 720                if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 721                        if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 722                                PM8001_FAIL_DBG(pm8001_ha,
 723                                        pm8001_printk("TMF task[%x]timeout.\n",
 724                                        tmf->tmf));
 725                                goto ex_err;
 726                        }
 727                }
 728
 729                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 730                        task->task_status.stat == SAM_STAT_GOOD) {
 731                        res = TMF_RESP_FUNC_COMPLETE;
 732                        break;
 733                }
 734
 735                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 736                task->task_status.stat == SAS_DATA_UNDERRUN) {
 737                        /* no error, but return the number of bytes of
 738                        * underrun */
 739                        res = task->task_status.residual;
 740                        break;
 741                }
 742
 743                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 744                        task->task_status.stat == SAS_DATA_OVERRUN) {
 745                        PM8001_FAIL_DBG(pm8001_ha,
 746                                pm8001_printk("Blocked task error.\n"));
 747                        res = -EMSGSIZE;
 748                        break;
 749                } else {
 750                        PM8001_EH_DBG(pm8001_ha,
 751                                pm8001_printk(" Task to dev %016llx response:"
 752                                "0x%x status 0x%x\n",
 753                                SAS_ADDR(dev->sas_addr),
 754                                task->task_status.resp,
 755                                task->task_status.stat));
 756                        sas_free_task(task);
 757                        task = NULL;
 758                }
 759        }
 760ex_err:
 761        BUG_ON(retry == 3 && task != NULL);
 762        sas_free_task(task);
 763        return res;
 764}
 765
 766static int
 767pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
 768        struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
 769        u32 task_tag)
 770{
 771        int res, retry;
 772        u32 ccb_tag;
 773        struct pm8001_ccb_info *ccb;
 774        struct sas_task *task = NULL;
 775
 776        for (retry = 0; retry < 3; retry++) {
 777                task = sas_alloc_slow_task(GFP_KERNEL);
 778                if (!task)
 779                        return -ENOMEM;
 780
 781                task->dev = dev;
 782                task->task_proto = dev->tproto;
 783                task->task_done = pm8001_task_done;
 784                task->slow_task->timer.data = (unsigned long)task;
 785                task->slow_task->timer.function = pm8001_tmf_timedout;
 786                task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
 787                add_timer(&task->slow_task->timer);
 788
 789                res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
 790                if (res)
 791                        return res;
 792                ccb = &pm8001_ha->ccb_info[ccb_tag];
 793                ccb->device = pm8001_dev;
 794                ccb->ccb_tag = ccb_tag;
 795                ccb->task = task;
 796                ccb->n_elem = 0;
 797
 798                res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
 799                        pm8001_dev, flag, task_tag, ccb_tag);
 800
 801                if (res) {
 802                        del_timer(&task->slow_task->timer);
 803                        PM8001_FAIL_DBG(pm8001_ha,
 804                                pm8001_printk("Executing internal task "
 805                                "failed\n"));
 806                        goto ex_err;
 807                }
 808                wait_for_completion(&task->slow_task->completion);
 809                res = TMF_RESP_FUNC_FAILED;
 810                /* Even TMF timed out, return direct. */
 811                if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 812                        if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 813                                PM8001_FAIL_DBG(pm8001_ha,
 814                                        pm8001_printk("TMF task timeout.\n"));
 815                                goto ex_err;
 816                        }
 817                }
 818
 819                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 820                        task->task_status.stat == SAM_STAT_GOOD) {
 821                        res = TMF_RESP_FUNC_COMPLETE;
 822                        break;
 823
 824                } else {
 825                        PM8001_EH_DBG(pm8001_ha,
 826                                pm8001_printk(" Task to dev %016llx response: "
 827                                        "0x%x status 0x%x\n",
 828                                SAS_ADDR(dev->sas_addr),
 829                                task->task_status.resp,
 830                                task->task_status.stat));
 831                        sas_free_task(task);
 832                        task = NULL;
 833                }
 834        }
 835ex_err:
 836        BUG_ON(retry == 3 && task != NULL);
 837        sas_free_task(task);
 838        return res;
 839}
 840
 841/**
 842  * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
 843  * @dev: the device structure which sas layer used.
 844  */
 845static void pm8001_dev_gone_notify(struct domain_device *dev)
 846{
 847        unsigned long flags = 0;
 848        struct pm8001_hba_info *pm8001_ha;
 849        struct pm8001_device *pm8001_dev = dev->lldd_dev;
 850
 851        pm8001_ha = pm8001_find_ha_by_dev(dev);
 852        spin_lock_irqsave(&pm8001_ha->lock, flags);
 853        if (pm8001_dev) {
 854                u32 device_id = pm8001_dev->device_id;
 855
 856                PM8001_DISC_DBG(pm8001_ha,
 857                        pm8001_printk("found dev[%d:%x] is gone.\n",
 858                        pm8001_dev->device_id, pm8001_dev->dev_type));
 859                if (pm8001_dev->running_req) {
 860                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 861                        pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 862                                dev, 1, 0);
 863                        spin_lock_irqsave(&pm8001_ha->lock, flags);
 864                }
 865                PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
 866                pm8001_free_dev(pm8001_dev);
 867        } else {
 868                PM8001_DISC_DBG(pm8001_ha,
 869                        pm8001_printk("Found dev has gone.\n"));
 870        }
 871        dev->lldd_dev = NULL;
 872        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 873}
 874
 875void pm8001_dev_gone(struct domain_device *dev)
 876{
 877        pm8001_dev_gone_notify(dev);
 878}
 879
 880static int pm8001_issue_ssp_tmf(struct domain_device *dev,
 881        u8 *lun, struct pm8001_tmf_task *tmf)
 882{
 883        struct sas_ssp_task ssp_task;
 884        if (!(dev->tproto & SAS_PROTOCOL_SSP))
 885                return TMF_RESP_FUNC_ESUPP;
 886
 887        strncpy((u8 *)&ssp_task.LUN, lun, 8);
 888        return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
 889                tmf);
 890}
 891
 892/* retry commands by ha, by task and/or by device */
 893void pm8001_open_reject_retry(
 894        struct pm8001_hba_info *pm8001_ha,
 895        struct sas_task *task_to_close,
 896        struct pm8001_device *device_to_close)
 897{
 898        int i;
 899        unsigned long flags;
 900
 901        if (pm8001_ha == NULL)
 902                return;
 903
 904        spin_lock_irqsave(&pm8001_ha->lock, flags);
 905
 906        for (i = 0; i < PM8001_MAX_CCB; i++) {
 907                struct sas_task *task;
 908                struct task_status_struct *ts;
 909                struct pm8001_device *pm8001_dev;
 910                unsigned long flags1;
 911                u32 tag;
 912                struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
 913
 914                pm8001_dev = ccb->device;
 915                if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
 916                        continue;
 917                if (!device_to_close) {
 918                        uintptr_t d = (uintptr_t)pm8001_dev
 919                                        - (uintptr_t)&pm8001_ha->devices;
 920                        if (((d % sizeof(*pm8001_dev)) != 0)
 921                         || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
 922                                continue;
 923                } else if (pm8001_dev != device_to_close)
 924                        continue;
 925                tag = ccb->ccb_tag;
 926                if (!tag || (tag == 0xFFFFFFFF))
 927                        continue;
 928                task = ccb->task;
 929                if (!task || !task->task_done)
 930                        continue;
 931                if (task_to_close && (task != task_to_close))
 932                        continue;
 933                ts = &task->task_status;
 934                ts->resp = SAS_TASK_COMPLETE;
 935                /* Force the midlayer to retry */
 936                ts->stat = SAS_OPEN_REJECT;
 937                ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
 938                if (pm8001_dev)
 939                        pm8001_dev->running_req--;
 940                spin_lock_irqsave(&task->task_state_lock, flags1);
 941                task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
 942                task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
 943                task->task_state_flags |= SAS_TASK_STATE_DONE;
 944                if (unlikely((task->task_state_flags
 945                                & SAS_TASK_STATE_ABORTED))) {
 946                        spin_unlock_irqrestore(&task->task_state_lock,
 947                                flags1);
 948                        pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
 949                } else {
 950                        spin_unlock_irqrestore(&task->task_state_lock,
 951                                flags1);
 952                        pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
 953                        mb();/* in order to force CPU ordering */
 954                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 955                        task->task_done(task);
 956                        spin_lock_irqsave(&pm8001_ha->lock, flags);
 957                }
 958        }
 959
 960        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 961}
 962
 963/**
 964  * Standard mandates link reset for ATA  (type 0) and hard reset for
 965  * SSP (type 1) , only for RECOVERY
 966  */
 967int pm8001_I_T_nexus_reset(struct domain_device *dev)
 968{
 969        int rc = TMF_RESP_FUNC_FAILED;
 970        struct pm8001_device *pm8001_dev;
 971        struct pm8001_hba_info *pm8001_ha;
 972        struct sas_phy *phy;
 973
 974        if (!dev || !dev->lldd_dev)
 975                return -ENODEV;
 976
 977        pm8001_dev = dev->lldd_dev;
 978        pm8001_ha = pm8001_find_ha_by_dev(dev);
 979        phy = sas_get_local_phy(dev);
 980
 981        if (dev_is_sata(dev)) {
 982                if (scsi_is_sas_phy_local(phy)) {
 983                        rc = 0;
 984                        goto out;
 985                }
 986                rc = sas_phy_reset(phy, 1);
 987                if (rc) {
 988                        PM8001_EH_DBG(pm8001_ha,
 989                        pm8001_printk("phy reset failed for device %x\n"
 990                        "with rc %d\n", pm8001_dev->device_id, rc));
 991                        rc = TMF_RESP_FUNC_FAILED;
 992                        goto out;
 993                }
 994                msleep(2000);
 995                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 996                        dev, 1, 0);
 997                if (rc) {
 998                        PM8001_EH_DBG(pm8001_ha,
 999                        pm8001_printk("task abort failed %x\n"
1000                        "with rc %d\n", pm8001_dev->device_id, rc));
1001                        rc = TMF_RESP_FUNC_FAILED;
1002                }
1003        } else {
1004                rc = sas_phy_reset(phy, 1);
1005                msleep(2000);
1006        }
1007        PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1008                pm8001_dev->device_id, rc));
1009 out:
1010        sas_put_local_phy(phy);
1011        return rc;
1012}
1013
1014/*
1015* This function handle the IT_NEXUS_XXX event or completion
1016* status code for SSP/SATA/SMP I/O request.
1017*/
1018int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
1019{
1020        int rc = TMF_RESP_FUNC_FAILED;
1021        struct pm8001_device *pm8001_dev;
1022        struct pm8001_hba_info *pm8001_ha;
1023        struct sas_phy *phy;
1024        u32 device_id = 0;
1025
1026        if (!dev || !dev->lldd_dev)
1027                return -1;
1028
1029        pm8001_dev = dev->lldd_dev;
1030        device_id = pm8001_dev->device_id;
1031        pm8001_ha = pm8001_find_ha_by_dev(dev);
1032
1033        PM8001_EH_DBG(pm8001_ha,
1034                        pm8001_printk("I_T_Nexus handler invoked !!"));
1035
1036        phy = sas_get_local_phy(dev);
1037
1038        if (dev_is_sata(dev)) {
1039                DECLARE_COMPLETION_ONSTACK(completion_setstate);
1040                if (scsi_is_sas_phy_local(phy)) {
1041                        rc = 0;
1042                        goto out;
1043                }
1044                /* send internal ssp/sata/smp abort command to FW */
1045                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1046                                                        dev, 1, 0);
1047                msleep(100);
1048
1049                /* deregister the target device */
1050                pm8001_dev_gone_notify(dev);
1051                msleep(200);
1052
1053                /*send phy reset to hard reset target */
1054                rc = sas_phy_reset(phy, 1);
1055                msleep(2000);
1056                pm8001_dev->setds_completion = &completion_setstate;
1057
1058                wait_for_completion(&completion_setstate);
1059        } else {
1060                /* send internal ssp/sata/smp abort command to FW */
1061                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1062                                                        dev, 1, 0);
1063                msleep(100);
1064
1065                /* deregister the target device */
1066                pm8001_dev_gone_notify(dev);
1067                msleep(200);
1068
1069                /*send phy reset to hard reset target */
1070                rc = sas_phy_reset(phy, 1);
1071                msleep(2000);
1072        }
1073        PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1074                pm8001_dev->device_id, rc));
1075out:
1076        sas_put_local_phy(phy);
1077
1078        return rc;
1079}
1080/* mandatory SAM-3, the task reset the specified LUN*/
1081int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
1082{
1083        int rc = TMF_RESP_FUNC_FAILED;
1084        struct pm8001_tmf_task tmf_task;
1085        struct pm8001_device *pm8001_dev = dev->lldd_dev;
1086        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1087        DECLARE_COMPLETION_ONSTACK(completion_setstate);
1088        if (dev_is_sata(dev)) {
1089                struct sas_phy *phy = sas_get_local_phy(dev);
1090                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1091                        dev, 1, 0);
1092                rc = sas_phy_reset(phy, 1);
1093                sas_put_local_phy(phy);
1094                pm8001_dev->setds_completion = &completion_setstate;
1095                rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1096                        pm8001_dev, 0x01);
1097                wait_for_completion(&completion_setstate);
1098        } else {
1099                tmf_task.tmf = TMF_LU_RESET;
1100                rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1101        }
1102        /* If failed, fall-through I_T_Nexus reset */
1103        PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
1104                pm8001_dev->device_id, rc));
1105        return rc;
1106}
1107
1108/* optional SAM-3 */
1109int pm8001_query_task(struct sas_task *task)
1110{
1111        u32 tag = 0xdeadbeef;
1112        int i = 0;
1113        struct scsi_lun lun;
1114        struct pm8001_tmf_task tmf_task;
1115        int rc = TMF_RESP_FUNC_FAILED;
1116        if (unlikely(!task || !task->lldd_task || !task->dev))
1117                return rc;
1118
1119        if (task->task_proto & SAS_PROTOCOL_SSP) {
1120                struct scsi_cmnd *cmnd = task->uldd_task;
1121                struct domain_device *dev = task->dev;
1122                struct pm8001_hba_info *pm8001_ha =
1123                        pm8001_find_ha_by_dev(dev);
1124
1125                int_to_scsilun(cmnd->device->lun, &lun);
1126                rc = pm8001_find_tag(task, &tag);
1127                if (rc == 0) {
1128                        rc = TMF_RESP_FUNC_FAILED;
1129                        return rc;
1130                }
1131                PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
1132                for (i = 0; i < 16; i++)
1133                        printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
1134                printk(KERN_INFO "]\n");
1135                tmf_task.tmf =  TMF_QUERY_TASK;
1136                tmf_task.tag_of_task_to_be_managed = tag;
1137
1138                rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1139                switch (rc) {
1140                /* The task is still in Lun, release it then */
1141                case TMF_RESP_FUNC_SUCC:
1142                        PM8001_EH_DBG(pm8001_ha,
1143                                pm8001_printk("The task is still in Lun\n"));
1144                        break;
1145                /* The task is not in Lun or failed, reset the phy */
1146                case TMF_RESP_FUNC_FAILED:
1147                case TMF_RESP_FUNC_COMPLETE:
1148                        PM8001_EH_DBG(pm8001_ha,
1149                        pm8001_printk("The task is not in Lun or failed,"
1150                        " reset the phy\n"));
1151                        break;
1152                }
1153        }
1154        pm8001_printk(":rc= %d\n", rc);
1155        return rc;
1156}
1157
1158/*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
1159int pm8001_abort_task(struct sas_task *task)
1160{
1161        unsigned long flags;
1162        u32 tag = 0xdeadbeef;
1163        u32 device_id;
1164        struct domain_device *dev ;
1165        struct pm8001_hba_info *pm8001_ha = NULL;
1166        struct pm8001_ccb_info *ccb;
1167        struct scsi_lun lun;
1168        struct pm8001_device *pm8001_dev;
1169        struct pm8001_tmf_task tmf_task;
1170        int rc = TMF_RESP_FUNC_FAILED;
1171        if (unlikely(!task || !task->lldd_task || !task->dev))
1172                return rc;
1173        spin_lock_irqsave(&task->task_state_lock, flags);
1174        if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1175                spin_unlock_irqrestore(&task->task_state_lock, flags);
1176                rc = TMF_RESP_FUNC_COMPLETE;
1177                goto out;
1178        }
1179        spin_unlock_irqrestore(&task->task_state_lock, flags);
1180        if (task->task_proto & SAS_PROTOCOL_SSP) {
1181                struct scsi_cmnd *cmnd = task->uldd_task;
1182                dev = task->dev;
1183                ccb = task->lldd_task;
1184                pm8001_dev = dev->lldd_dev;
1185                pm8001_ha = pm8001_find_ha_by_dev(dev);
1186                int_to_scsilun(cmnd->device->lun, &lun);
1187                rc = pm8001_find_tag(task, &tag);
1188                if (rc == 0) {
1189                        printk(KERN_INFO "No such tag in %s\n", __func__);
1190                        rc = TMF_RESP_FUNC_FAILED;
1191                        return rc;
1192                }
1193                device_id = pm8001_dev->device_id;
1194                PM8001_EH_DBG(pm8001_ha,
1195                        pm8001_printk("abort io to deviceid= %d\n", device_id));
1196                tmf_task.tmf = TMF_ABORT_TASK;
1197                tmf_task.tag_of_task_to_be_managed = tag;
1198                rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1199                pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1200                        pm8001_dev->sas_device, 0, tag);
1201        } else if (task->task_proto & SAS_PROTOCOL_SATA ||
1202                task->task_proto & SAS_PROTOCOL_STP) {
1203                dev = task->dev;
1204                pm8001_dev = dev->lldd_dev;
1205                pm8001_ha = pm8001_find_ha_by_dev(dev);
1206                rc = pm8001_find_tag(task, &tag);
1207                if (rc == 0) {
1208                        printk(KERN_INFO "No such tag in %s\n", __func__);
1209                        rc = TMF_RESP_FUNC_FAILED;
1210                        return rc;
1211                }
1212                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1213                        pm8001_dev->sas_device, 0, tag);
1214        } else if (task->task_proto & SAS_PROTOCOL_SMP) {
1215                /* SMP */
1216                dev = task->dev;
1217                pm8001_dev = dev->lldd_dev;
1218                pm8001_ha = pm8001_find_ha_by_dev(dev);
1219                rc = pm8001_find_tag(task, &tag);
1220                if (rc == 0) {
1221                        printk(KERN_INFO "No such tag in %s\n", __func__);
1222                        rc = TMF_RESP_FUNC_FAILED;
1223                        return rc;
1224                }
1225                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1226                        pm8001_dev->sas_device, 0, tag);
1227
1228        }
1229out:
1230        if (rc != TMF_RESP_FUNC_COMPLETE)
1231                pm8001_printk("rc= %d\n", rc);
1232        return rc;
1233}
1234
1235int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
1236{
1237        int rc = TMF_RESP_FUNC_FAILED;
1238        struct pm8001_tmf_task tmf_task;
1239
1240        tmf_task.tmf = TMF_ABORT_TASK_SET;
1241        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1242        return rc;
1243}
1244
1245int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
1246{
1247        int rc = TMF_RESP_FUNC_FAILED;
1248        struct pm8001_tmf_task tmf_task;
1249
1250        tmf_task.tmf = TMF_CLEAR_ACA;
1251        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1252
1253        return rc;
1254}
1255
1256int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1257{
1258        int rc = TMF_RESP_FUNC_FAILED;
1259        struct pm8001_tmf_task tmf_task;
1260        struct pm8001_device *pm8001_dev = dev->lldd_dev;
1261        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1262
1263        PM8001_EH_DBG(pm8001_ha,
1264                pm8001_printk("I_T_L_Q clear task set[%x]\n",
1265                pm8001_dev->device_id));
1266        tmf_task.tmf = TMF_CLEAR_TASK_SET;
1267        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1268        return rc;
1269}
1270
1271