linux/drivers/staging/comedi/drivers/pcl812.c
<<
>>
Prefs
   1/*
   2 * comedi/drivers/pcl812.c
   3 *
   4 * Author: Michal Dobes <dobes@tesnet.cz>
   5 *
   6 * hardware driver for Advantech cards
   7 *  card:   PCL-812, PCL-812PG, PCL-813, PCL-813B
   8 *  driver: pcl812,  pcl812pg,  pcl813,  pcl813b
   9 * and for ADlink cards
  10 *  card:   ACL-8112DG, ACL-8112HG, ACL-8112PG, ACL-8113, ACL-8216
  11 *  driver: acl8112dg,  acl8112hg,  acl8112pg,  acl8113,  acl8216
  12 * and for ICP DAS cards
  13 *  card:   ISO-813, A-821PGH, A-821PGL, A-821PGL-NDA, A-822PGH, A-822PGL,
  14 *  driver: iso813,  a821pgh,  a-821pgl, a-821pglnda,  a822pgh,  a822pgl,
  15 *  card:   A-823PGH, A-823PGL, A-826PG
  16 * driver:  a823pgh,  a823pgl,  a826pg
  17 */
  18
  19/*
  20 * Driver: pcl812
  21 * Description: Advantech PCL-812/PG, PCL-813/B,
  22 *           ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
  23 *           ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
  24 *           ICP DAS ISO-813
  25 * Author: Michal Dobes <dobes@tesnet.cz>
  26 * Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
  27 *      PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
  28 *      ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
  29 *      [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
  30 *      A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
  31 *      A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
  32 * Updated: Mon, 06 Aug 2007 12:03:15 +0100
  33 * Status: works (I hope. My board fire up under my hands
  34 *             and I cann't test all features.)
  35 *
  36 * This driver supports insn and cmd interfaces. Some boards support only insn
  37 * because their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
  38 * Data transfer over DMA is supported only when you measure only one
  39 * channel, this is too hardware limitation of these boards.
  40 *
  41 * Options for PCL-812:
  42 *   [0] - IO Base
  43 *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
  44 *   [2] - DMA  (0=disable, 1, 3)
  45 *   [3] - 0=trigger source is internal 8253 with 2MHz clock
  46 *         1=trigger source is external
  47 *   [4] - 0=A/D input range is +/-10V
  48 *         1=A/D input range is +/-5V
  49 *         2=A/D input range is +/-2.5V
  50 *         3=A/D input range is +/-1.25V
  51 *         4=A/D input range is +/-0.625V
  52 *         5=A/D input range is +/-0.3125V
  53 *   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
  54 *         1=D/A outputs 0-10V (internal reference -10V)
  55 *         2=D/A outputs unknown (external reference)
  56 *
  57 * Options for PCL-812PG, ACL-8112PG:
  58 *   [0] - IO Base
  59 *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
  60 *   [2] - DMA  (0=disable, 1, 3)
  61 *   [3] - 0=trigger source is internal 8253 with 2MHz clock
  62 *         1=trigger source is external
  63 *   [4] - 0=A/D have max +/-5V input
  64 *         1=A/D have max +/-10V input
  65 *   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
  66 *         1=D/A outputs 0-10V (internal reference -10V)
  67 *         2=D/A outputs unknown (external reference)
  68 *
  69 * Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
  70 *   [0] - IO Base
  71 *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
  72 *   [2] - DMA  (0=disable, 1, 3)
  73 *   [3] - 0=trigger source is internal 8253 with 2MHz clock
  74 *         1=trigger source is external
  75 *   [4] - 0=A/D channels are S.E.
  76 *         1=A/D channels are DIFF
  77 *   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
  78 *         1=D/A outputs 0-10V (internal reference -10V)
  79 *         2=D/A outputs unknown (external reference)
  80 *
  81 * Options for A-821PGL/PGH:
  82 *   [0] - IO Base
  83 *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7)
  84 *   [2] - 0=A/D channels are S.E.
  85 *         1=A/D channels are DIFF
  86 *   [3] - 0=D/A output 0-5V  (internal reference -5V)
  87 *         1=D/A output 0-10V (internal reference -10V)
  88 *
  89 * Options for A-821PGL-NDA:
  90 *   [0] - IO Base
  91 *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7)
  92 *   [2] - 0=A/D channels are S.E.
  93 *         1=A/D channels are DIFF
  94 *
  95 * Options for PCL-813:
  96 *   [0] - IO Base
  97 *
  98 * Options for PCL-813B:
  99 *   [0] - IO Base
 100 *   [1] - 0= bipolar inputs
 101 *         1= unipolar inputs
 102 *
 103 * Options for ACL-8113, ISO-813:
 104 *   [0] - IO Base
 105 *   [1] - 0= 10V bipolar inputs
 106 *         1= 10V unipolar inputs
 107 *         2= 20V bipolar inputs
 108 *         3= 20V unipolar inputs
 109 */
 110
 111#include <linux/module.h>
 112#include <linux/interrupt.h>
 113#include <linux/gfp.h>
 114#include <linux/delay.h>
 115#include <linux/io.h>
 116
 117#include "../comedidev.h"
 118
 119#include "comedi_isadma.h"
 120#include "comedi_8254.h"
 121
 122/*
 123 * Register I/O map
 124 */
 125#define PCL812_TIMER_BASE                       0x00
 126#define PCL812_AI_LSB_REG                       0x04
 127#define PCL812_AI_MSB_REG                       0x05
 128#define PCL812_AI_MSB_DRDY                      BIT(4)
 129#define PCL812_AO_LSB_REG(x)                    (0x04 + ((x) * 2))
 130#define PCL812_AO_MSB_REG(x)                    (0x05 + ((x) * 2))
 131#define PCL812_DI_LSB_REG                       0x06
 132#define PCL812_DI_MSB_REG                       0x07
 133#define PCL812_STATUS_REG                       0x08
 134#define PCL812_STATUS_DRDY                      BIT(5)
 135#define PCL812_RANGE_REG                        0x09
 136#define PCL812_MUX_REG                          0x0a
 137#define PCL812_MUX_CHAN(x)                      ((x) << 0)
 138#define PCL812_MUX_CS0                          BIT(4)
 139#define PCL812_MUX_CS1                          BIT(5)
 140#define PCL812_CTRL_REG                         0x0b
 141#define PCL812_CTRL_TRIG(x)                     (((x) & 0x7) << 0)
 142#define PCL812_CTRL_DISABLE_TRIG                PCL812_CTRL_TRIG(0)
 143#define PCL812_CTRL_SOFT_TRIG                   PCL812_CTRL_TRIG(1)
 144#define PCL812_CTRL_PACER_DMA_TRIG              PCL812_CTRL_TRIG(2)
 145#define PCL812_CTRL_PACER_EOC_TRIG              PCL812_CTRL_TRIG(6)
 146#define PCL812_SOFTTRIG_REG                     0x0c
 147#define PCL812_DO_LSB_REG                       0x0d
 148#define PCL812_DO_MSB_REG                       0x0e
 149
 150#define MAX_CHANLIST_LEN    256 /* length of scan list */
 151
 152static const struct comedi_lrange range_pcl812pg_ai = {
 153        5, {
 154                BIP_RANGE(5),
 155                BIP_RANGE(2.5),
 156                BIP_RANGE(1.25),
 157                BIP_RANGE(0.625),
 158                BIP_RANGE(0.3125)
 159        }
 160};
 161
 162static const struct comedi_lrange range_pcl812pg2_ai = {
 163        5, {
 164                BIP_RANGE(10),
 165                BIP_RANGE(5),
 166                BIP_RANGE(2.5),
 167                BIP_RANGE(1.25),
 168                BIP_RANGE(0.625)
 169        }
 170};
 171
 172static const struct comedi_lrange range812_bipolar1_25 = {
 173        1, {
 174                BIP_RANGE(1.25)
 175        }
 176};
 177
 178static const struct comedi_lrange range812_bipolar0_625 = {
 179        1, {
 180                BIP_RANGE(0.625)
 181        }
 182};
 183
 184static const struct comedi_lrange range812_bipolar0_3125 = {
 185        1, {
 186                BIP_RANGE(0.3125)
 187        }
 188};
 189
 190static const struct comedi_lrange range_pcl813b_ai = {
 191        4, {
 192                BIP_RANGE(5),
 193                BIP_RANGE(2.5),
 194                BIP_RANGE(1.25),
 195                BIP_RANGE(0.625)
 196        }
 197};
 198
 199static const struct comedi_lrange range_pcl813b2_ai = {
 200        4, {
 201                UNI_RANGE(10),
 202                UNI_RANGE(5),
 203                UNI_RANGE(2.5),
 204                UNI_RANGE(1.25)
 205        }
 206};
 207
 208static const struct comedi_lrange range_iso813_1_ai = {
 209        5, {
 210                BIP_RANGE(5),
 211                BIP_RANGE(2.5),
 212                BIP_RANGE(1.25),
 213                BIP_RANGE(0.625),
 214                BIP_RANGE(0.3125)
 215        }
 216};
 217
 218static const struct comedi_lrange range_iso813_1_2_ai = {
 219        5, {
 220                UNI_RANGE(10),
 221                UNI_RANGE(5),
 222                UNI_RANGE(2.5),
 223                UNI_RANGE(1.25),
 224                UNI_RANGE(0.625)
 225        }
 226};
 227
 228static const struct comedi_lrange range_iso813_2_ai = {
 229        4, {
 230                BIP_RANGE(5),
 231                BIP_RANGE(2.5),
 232                BIP_RANGE(1.25),
 233                BIP_RANGE(0.625)
 234        }
 235};
 236
 237static const struct comedi_lrange range_iso813_2_2_ai = {
 238        4, {
 239                UNI_RANGE(10),
 240                UNI_RANGE(5),
 241                UNI_RANGE(2.5),
 242                UNI_RANGE(1.25)
 243        }
 244};
 245
 246static const struct comedi_lrange range_acl8113_1_ai = {
 247        4, {
 248                BIP_RANGE(5),
 249                BIP_RANGE(2.5),
 250                BIP_RANGE(1.25),
 251                BIP_RANGE(0.625)
 252        }
 253};
 254
 255static const struct comedi_lrange range_acl8113_1_2_ai = {
 256        4, {
 257                UNI_RANGE(10),
 258                UNI_RANGE(5),
 259                UNI_RANGE(2.5),
 260                UNI_RANGE(1.25)
 261        }
 262};
 263
 264static const struct comedi_lrange range_acl8113_2_ai = {
 265        3, {
 266                BIP_RANGE(5),
 267                BIP_RANGE(2.5),
 268                BIP_RANGE(1.25)
 269        }
 270};
 271
 272static const struct comedi_lrange range_acl8113_2_2_ai = {
 273        3, {
 274                UNI_RANGE(10),
 275                UNI_RANGE(5),
 276                UNI_RANGE(2.5)
 277        }
 278};
 279
 280static const struct comedi_lrange range_acl8112dg_ai = {
 281        9, {
 282                BIP_RANGE(5),
 283                BIP_RANGE(2.5),
 284                BIP_RANGE(1.25),
 285                BIP_RANGE(0.625),
 286                UNI_RANGE(10),
 287                UNI_RANGE(5),
 288                UNI_RANGE(2.5),
 289                UNI_RANGE(1.25),
 290                BIP_RANGE(10)
 291        }
 292};
 293
 294static const struct comedi_lrange range_acl8112hg_ai = {
 295        12, {
 296                BIP_RANGE(5),
 297                BIP_RANGE(0.5),
 298                BIP_RANGE(0.05),
 299                BIP_RANGE(0.005),
 300                UNI_RANGE(10),
 301                UNI_RANGE(1),
 302                UNI_RANGE(0.1),
 303                UNI_RANGE(0.01),
 304                BIP_RANGE(10),
 305                BIP_RANGE(1),
 306                BIP_RANGE(0.1),
 307                BIP_RANGE(0.01)
 308        }
 309};
 310
 311static const struct comedi_lrange range_a821pgh_ai = {
 312        4, {
 313                BIP_RANGE(5),
 314                BIP_RANGE(0.5),
 315                BIP_RANGE(0.05),
 316                BIP_RANGE(0.005)
 317        }
 318};
 319
 320enum pcl812_boardtype {
 321        BOARD_PCL812PG  = 0,    /* and ACL-8112PG */
 322        BOARD_PCL813B   = 1,
 323        BOARD_PCL812    = 2,
 324        BOARD_PCL813    = 3,
 325        BOARD_ISO813    = 5,
 326        BOARD_ACL8113   = 6,
 327        BOARD_ACL8112   = 7,    /* ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH */
 328        BOARD_ACL8216   = 8,    /* and ICP DAS A-826PG */
 329        BOARD_A821      = 9,    /* PGH, PGL, PGL/NDA versions */
 330};
 331
 332struct pcl812_board {
 333        const char *name;
 334        enum pcl812_boardtype board_type;
 335        int n_aichan;
 336        int n_aochan;
 337        unsigned int ai_ns_min;
 338        const struct comedi_lrange *rangelist_ai;
 339        unsigned int irq_bits;
 340        unsigned int has_dma:1;
 341        unsigned int has_16bit_ai:1;
 342        unsigned int has_mpc508_mux:1;
 343        unsigned int has_dio:1;
 344};
 345
 346static const struct pcl812_board boardtypes[] = {
 347        {
 348                .name           = "pcl812",
 349                .board_type     = BOARD_PCL812,
 350                .n_aichan       = 16,
 351                .n_aochan       = 2,
 352                .ai_ns_min      = 33000,
 353                .rangelist_ai   = &range_bipolar10,
 354                .irq_bits       = 0xdcfc,
 355                .has_dma        = 1,
 356                .has_dio        = 1,
 357        }, {
 358                .name           = "pcl812pg",
 359                .board_type     = BOARD_PCL812PG,
 360                .n_aichan       = 16,
 361                .n_aochan       = 2,
 362                .ai_ns_min      = 33000,
 363                .rangelist_ai   = &range_pcl812pg_ai,
 364                .irq_bits       = 0xdcfc,
 365                .has_dma        = 1,
 366                .has_dio        = 1,
 367        }, {
 368                .name           = "acl8112pg",
 369                .board_type     = BOARD_PCL812PG,
 370                .n_aichan       = 16,
 371                .n_aochan       = 2,
 372                .ai_ns_min      = 10000,
 373                .rangelist_ai   = &range_pcl812pg_ai,
 374                .irq_bits       = 0xdcfc,
 375                .has_dma        = 1,
 376                .has_dio        = 1,
 377        }, {
 378                .name           = "acl8112dg",
 379                .board_type     = BOARD_ACL8112,
 380                .n_aichan       = 16,   /* 8 differential */
 381                .n_aochan       = 2,
 382                .ai_ns_min      = 10000,
 383                .rangelist_ai   = &range_acl8112dg_ai,
 384                .irq_bits       = 0xdcfc,
 385                .has_dma        = 1,
 386                .has_mpc508_mux = 1,
 387                .has_dio        = 1,
 388        }, {
 389                .name           = "acl8112hg",
 390                .board_type     = BOARD_ACL8112,
 391                .n_aichan       = 16,   /* 8 differential */
 392                .n_aochan       = 2,
 393                .ai_ns_min      = 10000,
 394                .rangelist_ai   = &range_acl8112hg_ai,
 395                .irq_bits       = 0xdcfc,
 396                .has_dma        = 1,
 397                .has_mpc508_mux = 1,
 398                .has_dio        = 1,
 399        }, {
 400                .name           = "a821pgl",
 401                .board_type     = BOARD_A821,
 402                .n_aichan       = 16,   /* 8 differential */
 403                .n_aochan       = 1,
 404                .ai_ns_min      = 10000,
 405                .rangelist_ai   = &range_pcl813b_ai,
 406                .irq_bits       = 0x000c,
 407                .has_dio        = 1,
 408        }, {
 409                .name           = "a821pglnda",
 410                .board_type     = BOARD_A821,
 411                .n_aichan       = 16,   /* 8 differential */
 412                .ai_ns_min      = 10000,
 413                .rangelist_ai   = &range_pcl813b_ai,
 414                .irq_bits       = 0x000c,
 415        }, {
 416                .name           = "a821pgh",
 417                .board_type     = BOARD_A821,
 418                .n_aichan       = 16,   /* 8 differential */
 419                .n_aochan       = 1,
 420                .ai_ns_min      = 10000,
 421                .rangelist_ai   = &range_a821pgh_ai,
 422                .irq_bits       = 0x000c,
 423                .has_dio        = 1,
 424        }, {
 425                .name           = "a822pgl",
 426                .board_type     = BOARD_ACL8112,
 427                .n_aichan       = 16,   /* 8 differential */
 428                .n_aochan       = 2,
 429                .ai_ns_min      = 10000,
 430                .rangelist_ai   = &range_acl8112dg_ai,
 431                .irq_bits       = 0xdcfc,
 432                .has_dma        = 1,
 433                .has_dio        = 1,
 434        }, {
 435                .name           = "a822pgh",
 436                .board_type     = BOARD_ACL8112,
 437                .n_aichan       = 16,   /* 8 differential */
 438                .n_aochan       = 2,
 439                .ai_ns_min      = 10000,
 440                .rangelist_ai   = &range_acl8112hg_ai,
 441                .irq_bits       = 0xdcfc,
 442                .has_dma        = 1,
 443                .has_dio        = 1,
 444        }, {
 445                .name           = "a823pgl",
 446                .board_type     = BOARD_ACL8112,
 447                .n_aichan       = 16,   /* 8 differential */
 448                .n_aochan       = 2,
 449                .ai_ns_min      = 8000,
 450                .rangelist_ai   = &range_acl8112dg_ai,
 451                .irq_bits       = 0xdcfc,
 452                .has_dma        = 1,
 453                .has_dio        = 1,
 454        }, {
 455                .name           = "a823pgh",
 456                .board_type     = BOARD_ACL8112,
 457                .n_aichan       = 16,   /* 8 differential */
 458                .n_aochan       = 2,
 459                .ai_ns_min      = 8000,
 460                .rangelist_ai   = &range_acl8112hg_ai,
 461                .irq_bits       = 0xdcfc,
 462                .has_dma        = 1,
 463                .has_dio        = 1,
 464        }, {
 465                .name           = "pcl813",
 466                .board_type     = BOARD_PCL813,
 467                .n_aichan       = 32,
 468                .rangelist_ai   = &range_pcl813b_ai,
 469        }, {
 470                .name           = "pcl813b",
 471                .board_type     = BOARD_PCL813B,
 472                .n_aichan       = 32,
 473                .rangelist_ai   = &range_pcl813b_ai,
 474        }, {
 475                .name           = "acl8113",
 476                .board_type     = BOARD_ACL8113,
 477                .n_aichan       = 32,
 478                .rangelist_ai   = &range_acl8113_1_ai,
 479        }, {
 480                .name           = "iso813",
 481                .board_type     = BOARD_ISO813,
 482                .n_aichan       = 32,
 483                .rangelist_ai   = &range_iso813_1_ai,
 484        }, {
 485                .name           = "acl8216",
 486                .board_type     = BOARD_ACL8216,
 487                .n_aichan       = 16,   /* 8 differential */
 488                .n_aochan       = 2,
 489                .ai_ns_min      = 10000,
 490                .rangelist_ai   = &range_pcl813b2_ai,
 491                .irq_bits       = 0xdcfc,
 492                .has_dma        = 1,
 493                .has_16bit_ai   = 1,
 494                .has_mpc508_mux = 1,
 495                .has_dio        = 1,
 496        }, {
 497                .name           = "a826pg",
 498                .board_type     = BOARD_ACL8216,
 499                .n_aichan       = 16,   /* 8 differential */
 500                .n_aochan       = 2,
 501                .ai_ns_min      = 10000,
 502                .rangelist_ai   = &range_pcl813b2_ai,
 503                .irq_bits       = 0xdcfc,
 504                .has_dma        = 1,
 505                .has_16bit_ai   = 1,
 506                .has_dio        = 1,
 507        },
 508};
 509
 510struct pcl812_private {
 511        struct comedi_isadma *dma;
 512        unsigned char range_correction; /* =1 we must add 1 to range number */
 513        unsigned int last_ai_chanspec;
 514        unsigned char mode_reg_int; /* stored INT number for some cards */
 515        unsigned int ai_poll_ptr; /* how many samples transfer poll */
 516        unsigned int max_812_ai_mode0_rangewait; /* settling time for gain */
 517        unsigned int use_diff:1;
 518        unsigned int use_mpc508:1;
 519        unsigned int use_ext_trg:1;
 520        unsigned int ai_dma:1;
 521        unsigned int ai_eos:1;
 522};
 523
 524static void pcl812_ai_setup_dma(struct comedi_device *dev,
 525                                struct comedi_subdevice *s,
 526                                unsigned int unread_samples)
 527{
 528        struct pcl812_private *devpriv = dev->private;
 529        struct comedi_isadma *dma = devpriv->dma;
 530        struct comedi_isadma_desc *desc = &dma->desc[dma->cur_dma];
 531        unsigned int bytes;
 532        unsigned int max_samples;
 533        unsigned int nsamples;
 534
 535        comedi_isadma_disable(dma->chan);
 536
 537        /* if using EOS, adapt DMA buffer to one scan */
 538        bytes = devpriv->ai_eos ? comedi_bytes_per_scan(s) : desc->maxsize;
 539        max_samples = comedi_bytes_to_samples(s, bytes);
 540
 541        /*
 542         * Determine dma size based on the buffer size plus the number of
 543         * unread samples and the number of samples remaining in the command.
 544         */
 545        nsamples = comedi_nsamples_left(s, max_samples + unread_samples);
 546        if (nsamples > unread_samples) {
 547                nsamples -= unread_samples;
 548                desc->size = comedi_samples_to_bytes(s, nsamples);
 549                comedi_isadma_program(desc);
 550        }
 551}
 552
 553static void pcl812_ai_set_chan_range(struct comedi_device *dev,
 554                                     unsigned int chanspec, char wait)
 555{
 556        struct pcl812_private *devpriv = dev->private;
 557        unsigned int chan = CR_CHAN(chanspec);
 558        unsigned int range = CR_RANGE(chanspec);
 559        unsigned int mux = 0;
 560
 561        if (chanspec == devpriv->last_ai_chanspec)
 562                return;
 563
 564        devpriv->last_ai_chanspec = chanspec;
 565
 566        if (devpriv->use_mpc508) {
 567                if (devpriv->use_diff) {
 568                        mux |= PCL812_MUX_CS0 | PCL812_MUX_CS1;
 569                } else {
 570                        if (chan < 8)
 571                                mux |= PCL812_MUX_CS0;
 572                        else
 573                                mux |= PCL812_MUX_CS1;
 574                }
 575        }
 576
 577        outb(mux | PCL812_MUX_CHAN(chan), dev->iobase + PCL812_MUX_REG);
 578        outb(range + devpriv->range_correction, dev->iobase + PCL812_RANGE_REG);
 579
 580        if (wait)
 581                /*
 582                 * XXX this depends on selected range and can be very long for
 583                 * some high gain ranges!
 584                 */
 585                udelay(devpriv->max_812_ai_mode0_rangewait);
 586}
 587
 588static void pcl812_ai_clear_eoc(struct comedi_device *dev)
 589{
 590        /* writing any value clears the interrupt request */
 591        outb(0, dev->iobase + PCL812_STATUS_REG);
 592}
 593
 594static void pcl812_ai_soft_trig(struct comedi_device *dev)
 595{
 596        /* writing any value triggers a software conversion */
 597        outb(255, dev->iobase + PCL812_SOFTTRIG_REG);
 598}
 599
 600static unsigned int pcl812_ai_get_sample(struct comedi_device *dev,
 601                                         struct comedi_subdevice *s)
 602{
 603        unsigned int val;
 604
 605        val = inb(dev->iobase + PCL812_AI_MSB_REG) << 8;
 606        val |= inb(dev->iobase + PCL812_AI_LSB_REG);
 607
 608        return val & s->maxdata;
 609}
 610
 611static int pcl812_ai_eoc(struct comedi_device *dev,
 612                         struct comedi_subdevice *s,
 613                         struct comedi_insn *insn,
 614                         unsigned long context)
 615{
 616        unsigned int status;
 617
 618        if (s->maxdata > 0x0fff) {
 619                status = inb(dev->iobase + PCL812_STATUS_REG);
 620                if ((status & PCL812_STATUS_DRDY) == 0)
 621                        return 0;
 622        } else {
 623                status = inb(dev->iobase + PCL812_AI_MSB_REG);
 624                if ((status & PCL812_AI_MSB_DRDY) == 0)
 625                        return 0;
 626        }
 627        return -EBUSY;
 628}
 629
 630static int pcl812_ai_cmdtest(struct comedi_device *dev,
 631                             struct comedi_subdevice *s, struct comedi_cmd *cmd)
 632{
 633        const struct pcl812_board *board = dev->board_ptr;
 634        struct pcl812_private *devpriv = dev->private;
 635        int err = 0;
 636        unsigned int flags;
 637
 638        /* Step 1 : check if triggers are trivially valid */
 639
 640        err |= comedi_check_trigger_src(&cmd->start_src, TRIG_NOW);
 641        err |= comedi_check_trigger_src(&cmd->scan_begin_src, TRIG_FOLLOW);
 642
 643        if (devpriv->use_ext_trg)
 644                flags = TRIG_EXT;
 645        else
 646                flags = TRIG_TIMER;
 647        err |= comedi_check_trigger_src(&cmd->convert_src, flags);
 648
 649        err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
 650        err |= comedi_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);
 651
 652        if (err)
 653                return 1;
 654
 655        /* Step 2a : make sure trigger sources are unique */
 656
 657        err |= comedi_check_trigger_is_unique(cmd->stop_src);
 658
 659        /* Step 2b : and mutually compatible */
 660
 661        if (err)
 662                return 2;
 663
 664        /* Step 3: check if arguments are trivially valid */
 665
 666        err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0);
 667        err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
 668
 669        if (cmd->convert_src == TRIG_TIMER) {
 670                err |= comedi_check_trigger_arg_min(&cmd->convert_arg,
 671                                                    board->ai_ns_min);
 672        } else {        /* TRIG_EXT */
 673                err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0);
 674        }
 675
 676        err |= comedi_check_trigger_arg_min(&cmd->chanlist_len, 1);
 677        err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg,
 678                                           cmd->chanlist_len);
 679
 680        if (cmd->stop_src == TRIG_COUNT)
 681                err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1);
 682        else    /* TRIG_NONE */
 683                err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0);
 684
 685        if (err)
 686                return 3;
 687
 688        /* step 4: fix up any arguments */
 689
 690        if (cmd->convert_src == TRIG_TIMER) {
 691                unsigned int arg = cmd->convert_arg;
 692
 693                comedi_8254_cascade_ns_to_timer(dev->pacer, &arg, cmd->flags);
 694                err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg);
 695        }
 696
 697        if (err)
 698                return 4;
 699
 700        return 0;
 701}
 702
 703static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 704{
 705        struct pcl812_private *devpriv = dev->private;
 706        struct comedi_isadma *dma = devpriv->dma;
 707        struct comedi_cmd *cmd = &s->async->cmd;
 708        unsigned int ctrl = 0;
 709        unsigned int i;
 710
 711        pcl812_ai_set_chan_range(dev, cmd->chanlist[0], 1);
 712
 713        if (dma) {      /*  check if we can use DMA transfer */
 714                devpriv->ai_dma = 1;
 715                for (i = 1; i < cmd->chanlist_len; i++)
 716                        if (cmd->chanlist[0] != cmd->chanlist[i]) {
 717                                /*  we cann't use DMA :-( */
 718                                devpriv->ai_dma = 0;
 719                                break;
 720                        }
 721        } else {
 722                devpriv->ai_dma = 0;
 723        }
 724
 725        devpriv->ai_poll_ptr = 0;
 726
 727        /*  don't we want wake up every scan? */
 728        if (cmd->flags & CMDF_WAKE_EOS) {
 729                devpriv->ai_eos = 1;
 730
 731                /*  DMA is useless for this situation */
 732                if (cmd->chanlist_len == 1)
 733                        devpriv->ai_dma = 0;
 734        }
 735
 736        if (devpriv->ai_dma) {
 737                /* setup and enable dma for the first buffer */
 738                dma->cur_dma = 0;
 739                pcl812_ai_setup_dma(dev, s, 0);
 740        }
 741
 742        switch (cmd->convert_src) {
 743        case TRIG_TIMER:
 744                comedi_8254_update_divisors(dev->pacer);
 745                comedi_8254_pacer_enable(dev->pacer, 1, 2, true);
 746                break;
 747        }
 748
 749        if (devpriv->ai_dma)
 750                ctrl |= PCL812_CTRL_PACER_DMA_TRIG;
 751        else
 752                ctrl |= PCL812_CTRL_PACER_EOC_TRIG;
 753        outb(devpriv->mode_reg_int | ctrl, dev->iobase + PCL812_CTRL_REG);
 754
 755        return 0;
 756}
 757
 758static bool pcl812_ai_next_chan(struct comedi_device *dev,
 759                                struct comedi_subdevice *s)
 760{
 761        struct comedi_cmd *cmd = &s->async->cmd;
 762
 763        if (cmd->stop_src == TRIG_COUNT &&
 764            s->async->scans_done >= cmd->stop_arg) {
 765                s->async->events |= COMEDI_CB_EOA;
 766                return false;
 767        }
 768
 769        return true;
 770}
 771
 772static void pcl812_handle_eoc(struct comedi_device *dev,
 773                              struct comedi_subdevice *s)
 774{
 775        struct comedi_cmd *cmd = &s->async->cmd;
 776        unsigned int chan = s->async->cur_chan;
 777        unsigned int next_chan;
 778        unsigned short val;
 779
 780        if (pcl812_ai_eoc(dev, s, NULL, 0)) {
 781                dev_dbg(dev->class_dev, "A/D cmd IRQ without DRDY!\n");
 782                s->async->events |= COMEDI_CB_ERROR;
 783                return;
 784        }
 785
 786        val = pcl812_ai_get_sample(dev, s);
 787        comedi_buf_write_samples(s, &val, 1);
 788
 789        /* Set up next channel. Added by abbotti 2010-01-20, but untested. */
 790        next_chan = s->async->cur_chan;
 791        if (cmd->chanlist[chan] != cmd->chanlist[next_chan])
 792                pcl812_ai_set_chan_range(dev, cmd->chanlist[next_chan], 0);
 793
 794        pcl812_ai_next_chan(dev, s);
 795}
 796
 797static void transfer_from_dma_buf(struct comedi_device *dev,
 798                                  struct comedi_subdevice *s,
 799                                  unsigned short *ptr,
 800                                  unsigned int bufptr, unsigned int len)
 801{
 802        unsigned int i;
 803        unsigned short val;
 804
 805        for (i = len; i; i--) {
 806                val = ptr[bufptr++];
 807                comedi_buf_write_samples(s, &val, 1);
 808
 809                if (!pcl812_ai_next_chan(dev, s))
 810                        break;
 811        }
 812}
 813
 814static void pcl812_handle_dma(struct comedi_device *dev,
 815                              struct comedi_subdevice *s)
 816{
 817        struct pcl812_private *devpriv = dev->private;
 818        struct comedi_isadma *dma = devpriv->dma;
 819        struct comedi_isadma_desc *desc = &dma->desc[dma->cur_dma];
 820        unsigned int nsamples;
 821        int bufptr;
 822
 823        nsamples = comedi_bytes_to_samples(s, desc->size) -
 824                   devpriv->ai_poll_ptr;
 825        bufptr = devpriv->ai_poll_ptr;
 826        devpriv->ai_poll_ptr = 0;
 827
 828        /* restart dma with the next buffer */
 829        dma->cur_dma = 1 - dma->cur_dma;
 830        pcl812_ai_setup_dma(dev, s, nsamples);
 831
 832        transfer_from_dma_buf(dev, s, desc->virt_addr, bufptr, nsamples);
 833}
 834
 835static irqreturn_t pcl812_interrupt(int irq, void *d)
 836{
 837        struct comedi_device *dev = d;
 838        struct comedi_subdevice *s = dev->read_subdev;
 839        struct pcl812_private *devpriv = dev->private;
 840
 841        if (!dev->attached) {
 842                pcl812_ai_clear_eoc(dev);
 843                return IRQ_HANDLED;
 844        }
 845
 846        if (devpriv->ai_dma)
 847                pcl812_handle_dma(dev, s);
 848        else
 849                pcl812_handle_eoc(dev, s);
 850
 851        pcl812_ai_clear_eoc(dev);
 852
 853        comedi_handle_events(dev, s);
 854        return IRQ_HANDLED;
 855}
 856
 857static int pcl812_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 858{
 859        struct pcl812_private *devpriv = dev->private;
 860        struct comedi_isadma *dma = devpriv->dma;
 861        struct comedi_isadma_desc *desc;
 862        unsigned long flags;
 863        unsigned int poll;
 864        int ret;
 865
 866        /* poll is valid only for DMA transfer */
 867        if (!devpriv->ai_dma)
 868                return 0;
 869
 870        spin_lock_irqsave(&dev->spinlock, flags);
 871
 872        poll = comedi_isadma_poll(dma);
 873        poll = comedi_bytes_to_samples(s, poll);
 874        if (poll > devpriv->ai_poll_ptr) {
 875                desc = &dma->desc[dma->cur_dma];
 876                transfer_from_dma_buf(dev, s, desc->virt_addr,
 877                                      devpriv->ai_poll_ptr,
 878                                      poll - devpriv->ai_poll_ptr);
 879                /* new buffer position */
 880                devpriv->ai_poll_ptr = poll;
 881
 882                ret = comedi_buf_n_bytes_ready(s);
 883        } else {
 884                /* no new samples */
 885                ret = 0;
 886        }
 887
 888        spin_unlock_irqrestore(&dev->spinlock, flags);
 889
 890        return ret;
 891}
 892
 893static int pcl812_ai_cancel(struct comedi_device *dev,
 894                            struct comedi_subdevice *s)
 895{
 896        struct pcl812_private *devpriv = dev->private;
 897
 898        if (devpriv->ai_dma)
 899                comedi_isadma_disable(devpriv->dma->chan);
 900
 901        outb(devpriv->mode_reg_int | PCL812_CTRL_DISABLE_TRIG,
 902             dev->iobase + PCL812_CTRL_REG);
 903        comedi_8254_pacer_enable(dev->pacer, 1, 2, false);
 904        pcl812_ai_clear_eoc(dev);
 905        return 0;
 906}
 907
 908static int pcl812_ai_insn_read(struct comedi_device *dev,
 909                               struct comedi_subdevice *s,
 910                               struct comedi_insn *insn,
 911                               unsigned int *data)
 912{
 913        struct pcl812_private *devpriv = dev->private;
 914        int ret = 0;
 915        int i;
 916
 917        outb(devpriv->mode_reg_int | PCL812_CTRL_SOFT_TRIG,
 918             dev->iobase + PCL812_CTRL_REG);
 919
 920        pcl812_ai_set_chan_range(dev, insn->chanspec, 1);
 921
 922        for (i = 0; i < insn->n; i++) {
 923                pcl812_ai_clear_eoc(dev);
 924                pcl812_ai_soft_trig(dev);
 925
 926                ret = comedi_timeout(dev, s, insn, pcl812_ai_eoc, 0);
 927                if (ret)
 928                        break;
 929
 930                data[i] = pcl812_ai_get_sample(dev, s);
 931        }
 932        outb(devpriv->mode_reg_int | PCL812_CTRL_DISABLE_TRIG,
 933             dev->iobase + PCL812_CTRL_REG);
 934        pcl812_ai_clear_eoc(dev);
 935
 936        return ret ? ret : insn->n;
 937}
 938
 939static int pcl812_ao_insn_write(struct comedi_device *dev,
 940                                struct comedi_subdevice *s,
 941                                struct comedi_insn *insn,
 942                                unsigned int *data)
 943{
 944        unsigned int chan = CR_CHAN(insn->chanspec);
 945        unsigned int val = s->readback[chan];
 946        int i;
 947
 948        for (i = 0; i < insn->n; i++) {
 949                val = data[i];
 950                outb(val & 0xff, dev->iobase + PCL812_AO_LSB_REG(chan));
 951                outb((val >> 8) & 0x0f, dev->iobase + PCL812_AO_MSB_REG(chan));
 952        }
 953        s->readback[chan] = val;
 954
 955        return insn->n;
 956}
 957
 958static int pcl812_di_insn_bits(struct comedi_device *dev,
 959                               struct comedi_subdevice *s,
 960                               struct comedi_insn *insn,
 961                               unsigned int *data)
 962{
 963        data[1] = inb(dev->iobase + PCL812_DI_LSB_REG) |
 964                  (inb(dev->iobase + PCL812_DI_MSB_REG) << 8);
 965
 966        return insn->n;
 967}
 968
 969static int pcl812_do_insn_bits(struct comedi_device *dev,
 970                               struct comedi_subdevice *s,
 971                               struct comedi_insn *insn,
 972                               unsigned int *data)
 973{
 974        if (comedi_dio_update_state(s, data)) {
 975                outb(s->state & 0xff, dev->iobase + PCL812_DO_LSB_REG);
 976                outb((s->state >> 8), dev->iobase + PCL812_DO_MSB_REG);
 977        }
 978
 979        data[1] = s->state;
 980
 981        return insn->n;
 982}
 983
 984static void pcl812_reset(struct comedi_device *dev)
 985{
 986        const struct pcl812_board *board = dev->board_ptr;
 987        struct pcl812_private *devpriv = dev->private;
 988        unsigned int chan;
 989
 990        /* disable analog input trigger */
 991        outb(devpriv->mode_reg_int | PCL812_CTRL_DISABLE_TRIG,
 992             dev->iobase + PCL812_CTRL_REG);
 993        pcl812_ai_clear_eoc(dev);
 994
 995        /*
 996         * Invalidate last_ai_chanspec then set analog input to
 997         * known channel/range.
 998         */
 999        devpriv->last_ai_chanspec = CR_PACK(16, 0, 0);
1000        pcl812_ai_set_chan_range(dev, CR_PACK(0, 0, 0), 0);
1001
1002        /* set analog output channels to 0V */
1003        for (chan = 0; chan < board->n_aochan; chan++) {
1004                outb(0, dev->iobase + PCL812_AO_LSB_REG(chan));
1005                outb(0, dev->iobase + PCL812_AO_MSB_REG(chan));
1006        }
1007
1008        /* set all digital outputs low */
1009        if (board->has_dio) {
1010                outb(0, dev->iobase + PCL812_DO_MSB_REG);
1011                outb(0, dev->iobase + PCL812_DO_LSB_REG);
1012        }
1013}
1014
1015static void pcl812_set_ai_range_table(struct comedi_device *dev,
1016                                      struct comedi_subdevice *s,
1017                                      struct comedi_devconfig *it)
1018{
1019        const struct pcl812_board *board = dev->board_ptr;
1020        struct pcl812_private *devpriv = dev->private;
1021
1022        switch (board->board_type) {
1023        case BOARD_PCL812PG:
1024                if (it->options[4] == 1)
1025                        s->range_table = &range_pcl812pg2_ai;
1026                else
1027                        s->range_table = board->rangelist_ai;
1028                break;
1029        case BOARD_PCL812:
1030                switch (it->options[4]) {
1031                case 0:
1032                        s->range_table = &range_bipolar10;
1033                        break;
1034                case 1:
1035                        s->range_table = &range_bipolar5;
1036                        break;
1037                case 2:
1038                        s->range_table = &range_bipolar2_5;
1039                        break;
1040                case 3:
1041                        s->range_table = &range812_bipolar1_25;
1042                        break;
1043                case 4:
1044                        s->range_table = &range812_bipolar0_625;
1045                        break;
1046                case 5:
1047                        s->range_table = &range812_bipolar0_3125;
1048                        break;
1049                default:
1050                        s->range_table = &range_bipolar10;
1051                        break;
1052                }
1053                break;
1054        case BOARD_PCL813B:
1055                if (it->options[1] == 1)
1056                        s->range_table = &range_pcl813b2_ai;
1057                else
1058                        s->range_table = board->rangelist_ai;
1059                break;
1060        case BOARD_ISO813:
1061                switch (it->options[1]) {
1062                case 0:
1063                        s->range_table = &range_iso813_1_ai;
1064                        break;
1065                case 1:
1066                        s->range_table = &range_iso813_1_2_ai;
1067                        break;
1068                case 2:
1069                        s->range_table = &range_iso813_2_ai;
1070                        devpriv->range_correction = 1;
1071                        break;
1072                case 3:
1073                        s->range_table = &range_iso813_2_2_ai;
1074                        devpriv->range_correction = 1;
1075                        break;
1076                default:
1077                        s->range_table = &range_iso813_1_ai;
1078                        break;
1079                }
1080                break;
1081        case BOARD_ACL8113:
1082                switch (it->options[1]) {
1083                case 0:
1084                        s->range_table = &range_acl8113_1_ai;
1085                        break;
1086                case 1:
1087                        s->range_table = &range_acl8113_1_2_ai;
1088                        break;
1089                case 2:
1090                        s->range_table = &range_acl8113_2_ai;
1091                        devpriv->range_correction = 1;
1092                        break;
1093                case 3:
1094                        s->range_table = &range_acl8113_2_2_ai;
1095                        devpriv->range_correction = 1;
1096                        break;
1097                default:
1098                        s->range_table = &range_acl8113_1_ai;
1099                        break;
1100                }
1101                break;
1102        default:
1103                s->range_table = board->rangelist_ai;
1104                break;
1105        }
1106}
1107
1108static void pcl812_alloc_dma(struct comedi_device *dev, unsigned int dma_chan)
1109{
1110        struct pcl812_private *devpriv = dev->private;
1111
1112        /* only DMA channels 3 and 1 are valid */
1113        if (!(dma_chan == 3 || dma_chan == 1))
1114                return;
1115
1116        /* DMA uses two 8K buffers */
1117        devpriv->dma = comedi_isadma_alloc(dev, 2, dma_chan, dma_chan,
1118                                           PAGE_SIZE * 2, COMEDI_ISADMA_READ);
1119}
1120
1121static void pcl812_free_dma(struct comedi_device *dev)
1122{
1123        struct pcl812_private *devpriv = dev->private;
1124
1125        if (devpriv)
1126                comedi_isadma_free(devpriv->dma);
1127}
1128
1129static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
1130{
1131        const struct pcl812_board *board = dev->board_ptr;
1132        struct pcl812_private *devpriv;
1133        struct comedi_subdevice *s;
1134        int n_subdevices;
1135        int subdev;
1136        int ret;
1137
1138        devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
1139        if (!devpriv)
1140                return -ENOMEM;
1141
1142        ret = comedi_request_region(dev, it->options[0], 0x10);
1143        if (ret)
1144                return ret;
1145
1146        if (board->irq_bits) {
1147                dev->pacer = comedi_8254_init(dev->iobase + PCL812_TIMER_BASE,
1148                                              I8254_OSC_BASE_2MHZ,
1149                                              I8254_IO8, 0);
1150                if (!dev->pacer)
1151                        return -ENOMEM;
1152
1153                if ((1 << it->options[1]) & board->irq_bits) {
1154                        ret = request_irq(it->options[1], pcl812_interrupt, 0,
1155                                          dev->board_name, dev);
1156                        if (ret == 0)
1157                                dev->irq = it->options[1];
1158                }
1159        }
1160
1161        /* we need an IRQ to do DMA on channel 3 or 1 */
1162        if (dev->irq && board->has_dma)
1163                pcl812_alloc_dma(dev, it->options[2]);
1164
1165        /* differential analog inputs? */
1166        switch (board->board_type) {
1167        case BOARD_A821:
1168                if (it->options[2] == 1)
1169                        devpriv->use_diff = 1;
1170                break;
1171        case BOARD_ACL8112:
1172        case BOARD_ACL8216:
1173                if (it->options[4] == 1)
1174                        devpriv->use_diff = 1;
1175                break;
1176        default:
1177                break;
1178        }
1179
1180        n_subdevices = 1;               /* all boardtypes have analog inputs */
1181        if (board->n_aochan > 0)
1182                n_subdevices++;
1183        if (board->has_dio)
1184                n_subdevices += 2;
1185
1186        ret = comedi_alloc_subdevices(dev, n_subdevices);
1187        if (ret)
1188                return ret;
1189
1190        subdev = 0;
1191
1192        /* Analog Input subdevice */
1193        s = &dev->subdevices[subdev];
1194        s->type         = COMEDI_SUBD_AI;
1195        s->subdev_flags = SDF_READABLE;
1196        if (devpriv->use_diff) {
1197                s->subdev_flags |= SDF_DIFF;
1198                s->n_chan       = board->n_aichan / 2;
1199        } else {
1200                s->subdev_flags |= SDF_GROUND;
1201                s->n_chan       = board->n_aichan;
1202        }
1203        s->maxdata      = board->has_16bit_ai ? 0xffff : 0x0fff;
1204
1205        pcl812_set_ai_range_table(dev, s, it);
1206
1207        s->insn_read    = pcl812_ai_insn_read;
1208
1209        if (dev->irq) {
1210                dev->read_subdev = s;
1211                s->subdev_flags |= SDF_CMD_READ;
1212                s->len_chanlist = MAX_CHANLIST_LEN;
1213                s->do_cmdtest   = pcl812_ai_cmdtest;
1214                s->do_cmd       = pcl812_ai_cmd;
1215                s->poll         = pcl812_ai_poll;
1216                s->cancel       = pcl812_ai_cancel;
1217        }
1218
1219        devpriv->use_mpc508 = board->has_mpc508_mux;
1220
1221        subdev++;
1222
1223        /* analog output */
1224        if (board->n_aochan > 0) {
1225                s = &dev->subdevices[subdev];
1226                s->type         = COMEDI_SUBD_AO;
1227                s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
1228                s->n_chan       = board->n_aochan;
1229                s->maxdata      = 0xfff;
1230                switch (board->board_type) {
1231                case BOARD_A821:
1232                        if (it->options[3] == 1)
1233                                s->range_table = &range_unipolar10;
1234                        else
1235                                s->range_table = &range_unipolar5;
1236                        break;
1237                case BOARD_PCL812:
1238                case BOARD_ACL8112:
1239                case BOARD_PCL812PG:
1240                case BOARD_ACL8216:
1241                        switch (it->options[5]) {
1242                        case 1:
1243                                s->range_table = &range_unipolar10;
1244                                break;
1245                        case 2:
1246                                s->range_table = &range_unknown;
1247                                break;
1248                        default:
1249                                s->range_table = &range_unipolar5;
1250                                break;
1251                        }
1252                        break;
1253                default:
1254                        s->range_table = &range_unipolar5;
1255                        break;
1256                }
1257                s->insn_write   = pcl812_ao_insn_write;
1258
1259                ret = comedi_alloc_subdev_readback(s);
1260                if (ret)
1261                        return ret;
1262
1263                subdev++;
1264        }
1265
1266        if (board->has_dio) {
1267                /* Digital Input subdevice */
1268                s = &dev->subdevices[subdev];
1269                s->type         = COMEDI_SUBD_DI;
1270                s->subdev_flags = SDF_READABLE;
1271                s->n_chan       = 16;
1272                s->maxdata      = 1;
1273                s->range_table  = &range_digital;
1274                s->insn_bits    = pcl812_di_insn_bits;
1275                subdev++;
1276
1277                /* Digital Output subdevice */
1278                s = &dev->subdevices[subdev];
1279                s->type         = COMEDI_SUBD_DO;
1280                s->subdev_flags = SDF_WRITABLE;
1281                s->n_chan       = 16;
1282                s->maxdata      = 1;
1283                s->range_table  = &range_digital;
1284                s->insn_bits    = pcl812_do_insn_bits;
1285                subdev++;
1286        }
1287
1288        switch (board->board_type) {
1289        case BOARD_ACL8216:
1290        case BOARD_PCL812PG:
1291        case BOARD_PCL812:
1292        case BOARD_ACL8112:
1293                devpriv->max_812_ai_mode0_rangewait = 1;
1294                if (it->options[3] > 0)
1295                                                /*  we use external trigger */
1296                        devpriv->use_ext_trg = 1;
1297                break;
1298        case BOARD_A821:
1299                devpriv->max_812_ai_mode0_rangewait = 1;
1300                devpriv->mode_reg_int = (dev->irq << 4) & 0xf0;
1301                break;
1302        case BOARD_PCL813B:
1303        case BOARD_PCL813:
1304        case BOARD_ISO813:
1305        case BOARD_ACL8113:
1306                /* maybe there must by greatest timeout */
1307                devpriv->max_812_ai_mode0_rangewait = 5;
1308                break;
1309        }
1310
1311        pcl812_reset(dev);
1312
1313        return 0;
1314}
1315
1316static void pcl812_detach(struct comedi_device *dev)
1317{
1318        pcl812_free_dma(dev);
1319        comedi_legacy_detach(dev);
1320}
1321
1322static struct comedi_driver pcl812_driver = {
1323        .driver_name    = "pcl812",
1324        .module         = THIS_MODULE,
1325        .attach         = pcl812_attach,
1326        .detach         = pcl812_detach,
1327        .board_name     = &boardtypes[0].name,
1328        .num_names      = ARRAY_SIZE(boardtypes),
1329        .offset         = sizeof(struct pcl812_board),
1330};
1331module_comedi_driver(pcl812_driver);
1332
1333MODULE_AUTHOR("Comedi http://www.comedi.org");
1334MODULE_DESCRIPTION("Comedi low-level driver");
1335MODULE_LICENSE("GPL");
1336