/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 ******************************************************************************/
#define _RTL8188E_CMD_C_

#include <osdep_service.h>
#include <drv_types.h>
#include <recv_osdep.h>
#include <mlme_osdep.h>
#include <rtw_ioctl_set.h>

#include <rtl8188e_hal.h>

#define RTL88E_MAX_H2C_BOX_NUMS         4
#define RTL88E_MAX_CMD_LEN              7
#define RTL88E_MESSAGE_BOX_SIZE         4
#define RTL88E_EX_MESSAGE_BOX_SIZE      4

static u8 _is_fw_read_cmd_down(struct adapter *adapt, u8 msgbox_num)
{
        u8 read_down = false;
        int     retry_cnts = 100;

        u8 valid;

        do {
                valid = usb_read8(adapt, REG_HMETFR) & BIT(msgbox_num);
                if (0 == valid)
                        read_down = true;
        } while ((!read_down) && (retry_cnts--));

        return read_down;
}

/*****************************************
* H2C Msg format :
* 0x1DF - 0x1D0
*| 31 - 8       | 7-5    4 - 0  |
*| h2c_msg      |Class_ID CMD_ID        |
*
* Extend 0x1FF - 0x1F0
*|31 - 0          |
*|ext_msg|
******************************************/
static s32 FillH2CCmd_88E(struct adapter *adapt, u8 ElementID, u32 CmdLen, u8 *pCmdBuffer)
{
        u8 bcmd_down = false;
        s32 retry_cnts = 100;
        u8 h2c_box_num;
        u32 msgbox_addr;
        u32 msgbox_ex_addr;
        u8 cmd_idx, ext_cmd_len;
        u32 h2c_cmd = 0;
        u32 h2c_cmd_ex = 0;
        s32 ret = _FAIL;


        if (!adapt->bFWReady) {
                DBG_88E("FillH2CCmd_88E(): return H2C cmd because fw is not ready\n");
                return ret;
        }

        if (!pCmdBuffer)
                goto exit;
        if (CmdLen > RTL88E_MAX_CMD_LEN)
                goto exit;
        if (adapt->bSurpriseRemoved)
                goto exit;

        /* pay attention to if  race condition happened in  H2C cmd setting. */
        do {
                h2c_box_num = adapt->HalData->LastHMEBoxNum;

                if (!_is_fw_read_cmd_down(adapt, h2c_box_num)) {
                        DBG_88E(" fw read cmd failed...\n");
                        goto exit;
                }

                *(u8 *)(&h2c_cmd) = ElementID;

                if (CmdLen <= 3) {
                        memcpy((u8 *)(&h2c_cmd)+1, pCmdBuffer, CmdLen);
                } else {
                        memcpy((u8 *)(&h2c_cmd)+1, pCmdBuffer, 3);
                        ext_cmd_len = CmdLen-3;
                        memcpy((u8 *)(&h2c_cmd_ex), pCmdBuffer+3, ext_cmd_len);

                        /* Write Ext command */
                        msgbox_ex_addr = REG_HMEBOX_EXT_0 + (h2c_box_num * RTL88E_EX_MESSAGE_BOX_SIZE);
                        for (cmd_idx = 0; cmd_idx < ext_cmd_len; cmd_idx++) {
                                usb_write8(adapt, msgbox_ex_addr+cmd_idx, *((u8 *)(&h2c_cmd_ex)+cmd_idx));
                        }
                }
                /*  Write command */
                msgbox_addr = REG_HMEBOX_0 + (h2c_box_num * RTL88E_MESSAGE_BOX_SIZE);
                for (cmd_idx = 0; cmd_idx < RTL88E_MESSAGE_BOX_SIZE; cmd_idx++) {
                        usb_write8(adapt, msgbox_addr+cmd_idx, *((u8 *)(&h2c_cmd)+cmd_idx));
                }
                bcmd_down = true;

                adapt->HalData->LastHMEBoxNum =
                        (h2c_box_num+1) % RTL88E_MAX_H2C_BOX_NUMS;

        } while ((!bcmd_down) && (retry_cnts--));

        ret = _SUCCESS;

exit:


        return ret;
}

/* bitmap[0:27] = tx_rate_bitmap */
/* bitmap[28:31]= Rate Adaptive id */
/* arg[0:4] = macid */
/* arg[5] = Short GI */
void rtw_hal_add_ra_tid(struct adapter *pAdapter, u32 bitmap, u8 arg, u8 rssi_level)
{
        struct odm_dm_struct *odmpriv = &pAdapter->HalData->odmpriv;

        u8 macid, init_rate, raid, shortGIrate = false;

        macid = arg&0x1f;

        raid = (bitmap>>28) & 0x0f;
        bitmap &= 0x0fffffff;

        if (rssi_level != DM_RATR_STA_INIT)
                bitmap = ODM_Get_Rate_Bitmap(odmpriv, macid, bitmap, rssi_level);

        bitmap |= ((raid<<28)&0xf0000000);

        init_rate = get_highest_rate_idx(bitmap&0x0fffffff)&0x3f;

        shortGIrate = (arg & BIT(5)) ? true : false;

        if (shortGIrate)
                init_rate |= BIT(6);

        raid = (bitmap>>28) & 0x0f;

        bitmap &= 0x0fffffff;

        DBG_88E("%s=> mac_id:%d, raid:%d, ra_bitmap=0x%x, shortGIrate=0x%02x\n",
                __func__, macid, raid, bitmap, shortGIrate);

        ODM_RA_UpdateRateInfo_8188E(odmpriv, macid, raid, bitmap, shortGIrate);
}

void rtl8188e_set_FwPwrMode_cmd(struct adapter *adapt, u8 Mode)
{
        struct setpwrmode_parm H2CSetPwrMode;
        struct pwrctrl_priv *pwrpriv = &adapt->pwrctrlpriv;
        u8 RLBM = 0; /*  0:Min, 1:Max, 2:User define */

        DBG_88E("%s: Mode=%d SmartPS=%d UAPSD=%d\n", __func__,
                Mode, pwrpriv->smart_ps, adapt->registrypriv.uapsd_enable);

        switch (Mode) {
        case PS_MODE_ACTIVE:
                H2CSetPwrMode.Mode = 0;
                break;
        case PS_MODE_MIN:
                H2CSetPwrMode.Mode = 1;
                break;
        case PS_MODE_MAX:
                RLBM = 1;
                H2CSetPwrMode.Mode = 1;
                break;
        case PS_MODE_DTIM:
                RLBM = 2;
                H2CSetPwrMode.Mode = 1;
                break;
        case PS_MODE_UAPSD_WMM:
                H2CSetPwrMode.Mode = 2;
                break;
        default:
                H2CSetPwrMode.Mode = 0;
                break;
        }

        H2CSetPwrMode.SmartPS_RLBM = (((pwrpriv->smart_ps<<4)&0xf0) | (RLBM & 0x0f));

        H2CSetPwrMode.AwakeInterval = 1;

        H2CSetPwrMode.bAllQueueUAPSD = adapt->registrypriv.uapsd_enable;

        if (Mode > 0)
                H2CSetPwrMode.PwrState = 0x00;/*  AllON(0x0C), RFON(0x04), RFOFF(0x00) */
        else
                H2CSetPwrMode.PwrState = 0x0C;/*  AllON(0x0C), RFON(0x04), RFOFF(0x00) */

        FillH2CCmd_88E(adapt, H2C_PS_PWR_MODE, sizeof(H2CSetPwrMode), (u8 *)&H2CSetPwrMode);

}

void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt)
{
        u8 opmode, macid;
        u16 mst_rpt = le16_to_cpu(mstatus_rpt);

        opmode = (u8)mst_rpt;
        macid = (u8)(mst_rpt >> 8);

        DBG_88E("### %s: MStatus=%x MACID=%d\n", __func__, opmode, macid);
        FillH2CCmd_88E(adapt, H2C_COM_MEDIA_STATUS_RPT, sizeof(mst_rpt), (u8 *)&mst_rpt);
}

static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
{
        struct ieee80211_hdr *pwlanhdr;
        __le16 *fctrl;
        u32 rate_len, pktlen;
        struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
        struct mlme_ext_info    *pmlmeinfo = &(pmlmeext->mlmext_info);
        struct wlan_bssid_ex            *cur_network = &(pmlmeinfo->network);
        u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};

        pwlanhdr = (struct ieee80211_hdr *)pframe;

        fctrl = &pwlanhdr->frame_control;
        *(fctrl) = 0;

        ether_addr_copy(pwlanhdr->addr1, bc_addr);
        ether_addr_copy(pwlanhdr->addr2, myid(&(adapt->eeprompriv)));
        ether_addr_copy(pwlanhdr->addr3, cur_network->MacAddress);

        SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/);
        SetFrameSubType(pframe, WIFI_BEACON);

        pframe += sizeof(struct ieee80211_hdr_3addr);
        pktlen = sizeof(struct ieee80211_hdr_3addr);

        /* timestamp will be inserted by hardware */
        pframe += 8;
        pktlen += 8;

        /*  beacon interval: 2 bytes */
        memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2);

        pframe += 2;
        pktlen += 2;

        /*  capability info: 2 bytes */
        memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2);

        pframe += 2;
        pktlen += 2;

        if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
                pktlen += cur_network->IELength - sizeof(struct ndis_802_11_fixed_ie);
                memcpy(pframe, cur_network->IEs+sizeof(struct ndis_802_11_fixed_ie), pktlen);

                goto _ConstructBeacon;
        }

        /* below for ad-hoc mode */

        /*  SSID */
        pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &pktlen);

        /*  supported rates... */
        rate_len = rtw_get_rateset_len(cur_network->SupportedRates);
        pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, min_t(u32, rate_len, 8), cur_network->SupportedRates, &pktlen);

        /*  DS parameter set */
        pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pktlen);

        if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) {
                u32 ATIMWindow;
                /*  IBSS Parameter Set... */
                ATIMWindow = 0;
                pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &pktlen);
        }

        /* todo: ERP IE */

        /*  EXTERNDED SUPPORTED RATE */
        if (rate_len > 8)
                pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &pktlen);

        /* todo:HT for adhoc */

_ConstructBeacon:

        if ((pktlen + TXDESC_SIZE) > 512) {
                DBG_88E("beacon frame too large\n");
                return;
        }

        *pLength = pktlen;
}

static void ConstructPSPoll(struct adapter *adapt, u8 *pframe, u32 *pLength)
{
        struct ieee80211_hdr *pwlanhdr;
        struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
        struct mlme_ext_info    *pmlmeinfo = &(pmlmeext->mlmext_info);
        __le16 *fctrl;
        struct wlan_bssid_ex *pnetwork = &(pmlmeinfo->network);

        pwlanhdr = (struct ieee80211_hdr *)pframe;

        /*  Frame control. */
        fctrl = &pwlanhdr->frame_control;
        *(fctrl) = 0;
        SetPwrMgt(fctrl);
        SetFrameSubType(pframe, WIFI_PSPOLL);

        /*  AID. */
        SetDuration(pframe, (pmlmeinfo->aid | 0xc000));

        /*  BSSID. */
        ether_addr_copy(pwlanhdr->addr1, pnetwork->MacAddress);

        /*  TA. */
        ether_addr_copy(pwlanhdr->addr2, myid(&(adapt->eeprompriv)));

        *pLength = 16;
}

static void ConstructNullFunctionData(struct adapter *adapt, u8 *pframe,
        u32 *pLength,
        u8 *StaAddr,
        u8 bQoS,
        u8 AC,
        u8 bEosp,
        u8 bForcePowerSave)
{
        struct ieee80211_hdr *pwlanhdr;
        __le16 *fctrl;
        u32 pktlen;
        struct mlme_priv *pmlmepriv = &adapt->mlmepriv;
        struct wlan_network             *cur_network = &pmlmepriv->cur_network;
        struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
        struct mlme_ext_info    *pmlmeinfo = &(pmlmeext->mlmext_info);
        struct wlan_bssid_ex *pnetwork = &(pmlmeinfo->network);

        pwlanhdr = (struct ieee80211_hdr *)pframe;

        fctrl = &pwlanhdr->frame_control;
        *(fctrl) = 0;
        if (bForcePowerSave)
                SetPwrMgt(fctrl);

        switch (cur_network->network.InfrastructureMode) {
        case Ndis802_11Infrastructure:
                SetToDs(fctrl);
                ether_addr_copy(pwlanhdr->addr1, pnetwork->MacAddress);
                ether_addr_copy(pwlanhdr->addr2, myid(&(adapt->eeprompriv)));
                ether_addr_copy(pwlanhdr->addr3, StaAddr);
                break;
        case Ndis802_11APMode:
                SetFrDs(fctrl);
                ether_addr_copy(pwlanhdr->addr1, StaAddr);
                ether_addr_copy(pwlanhdr->addr2, pnetwork->MacAddress);
                ether_addr_copy(pwlanhdr->addr3, myid(&(adapt->eeprompriv)));
                break;
        case Ndis802_11IBSS:
        default:
                ether_addr_copy(pwlanhdr->addr1, StaAddr);
                ether_addr_copy(pwlanhdr->addr2, myid(&(adapt->eeprompriv)));
                ether_addr_copy(pwlanhdr->addr3, pnetwork->MacAddress);
                break;
        }

        SetSeqNum(pwlanhdr, 0);

        if (bQoS) {
                struct ieee80211_qos_hdr *pwlanqoshdr;

                SetFrameSubType(pframe, WIFI_QOS_DATA_NULL);

                pwlanqoshdr = (struct ieee80211_qos_hdr *)pframe;
                SetPriority(&pwlanqoshdr->qos_ctrl, AC);
                SetEOSP(&pwlanqoshdr->qos_ctrl, bEosp);

                pktlen = sizeof(struct ieee80211_qos_hdr);
        } else {
                SetFrameSubType(pframe, WIFI_DATA_NULL);

                pktlen = sizeof(struct ieee80211_hdr_3addr);
        }

        *pLength = pktlen;
}

static void ConstructProbeRsp(struct adapter *adapt, u8 *pframe, u32 *pLength, u8 *StaAddr, bool bHideSSID)
{
        struct ieee80211_hdr *pwlanhdr;
        __le16 *fctrl;
        u8 *mac, *bssid;
        u32 pktlen;
        struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
        struct mlme_ext_info    *pmlmeinfo = &(pmlmeext->mlmext_info);
        struct wlan_bssid_ex    *cur_network = &(pmlmeinfo->network);

        pwlanhdr = (struct ieee80211_hdr *)pframe;

        mac = myid(&(adapt->eeprompriv));
        bssid = cur_network->MacAddress;

        fctrl = &pwlanhdr->frame_control;
        *(fctrl) = 0;
        ether_addr_copy(pwlanhdr->addr1, StaAddr);
        ether_addr_copy(pwlanhdr->addr2, mac);
        ether_addr_copy(pwlanhdr->addr3, bssid);

        SetSeqNum(pwlanhdr, 0);
        SetFrameSubType(fctrl, WIFI_PROBERSP);

        pktlen = sizeof(struct ieee80211_hdr_3addr);
        pframe += pktlen;

        if (cur_network->IELength > MAX_IE_SZ)
                return;

        memcpy(pframe, cur_network->IEs, cur_network->IELength);
        pframe += cur_network->IELength;
        pktlen += cur_network->IELength;

        *pLength = pktlen;
}

/*  */
/*  Description: Fill the reserved packets that FW will use to RSVD page. */
/*                      Now we just send 4 types packet to rsvd page. */
/*                      (1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. */
/*      Input: */
/*          bDLFinished - false: At the first time we will send all the packets as a large packet to Hw, */
/*                                              so we need to set the packet length to total length. */
/*                            true: At the second time, we should send the first packet (default:beacon) */
/*                                              to Hw again and set the length in descriptor to the real beacon length. */
/*  2009.10.15 by tynli. */
static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
{
        struct xmit_frame       *pmgntframe;
        struct pkt_attrib       *pattrib;
        struct xmit_priv *pxmitpriv;
        struct mlme_ext_priv *pmlmeext;
        struct mlme_ext_info    *pmlmeinfo;
        u32 BeaconLength = 0, ProbeRspLength = 0, PSPollLength;
        u32 NullDataLength, QosNullLength;
        u8 *ReservedPagePacket;
        u8 PageNum, PageNeed, TxDescLen;
        u16 BufIndex;
        u32 TotalPacketLen;
        struct rsvdpage_loc RsvdPageLoc;
        struct wlan_bssid_ex *pnetwork;

        DBG_88E("%s\n", __func__);
        ReservedPagePacket = kzalloc(1000, GFP_KERNEL);
        if (!ReservedPagePacket) {
                DBG_88E("%s: alloc ReservedPagePacket fail!\n", __func__);
                return;
        }

        pxmitpriv = &adapt->xmitpriv;
        pmlmeext = &adapt->mlmeextpriv;
        pmlmeinfo = &pmlmeext->mlmext_info;
        pnetwork = &(pmlmeinfo->network);

        TxDescLen = TXDESC_SIZE;
        PageNum = 0;

        /* 3 (1) beacon * 2 pages */
        BufIndex = TXDESC_OFFSET;
        ConstructBeacon(adapt, &ReservedPagePacket[BufIndex], &BeaconLength);

        /*  When we count the first page size, we need to reserve description size for the RSVD */
        /*  packet, it will be filled in front of the packet in TXPKTBUF. */
        PageNeed = (u8)PageNum_128(TxDescLen + BeaconLength);
        /*  To reserved 2 pages for beacon buffer. 2010.06.24. */
        if (PageNeed == 1)
                PageNeed += 1;
        PageNum += PageNeed;
        adapt->HalData->FwRsvdPageStartOffset = PageNum;

        BufIndex += PageNeed*128;

        /* 3 (2) ps-poll *1 page */
        RsvdPageLoc.LocPsPoll = PageNum;
        ConstructPSPoll(adapt, &ReservedPagePacket[BufIndex], &PSPollLength);
        rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], PSPollLength, true, false);

        PageNeed = (u8)PageNum_128(TxDescLen + PSPollLength);
        PageNum += PageNeed;

        BufIndex += PageNeed*128;

        /* 3 (3) null data * 1 page */
        RsvdPageLoc.LocNullData = PageNum;
        ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex], &NullDataLength, pnetwork->MacAddress, false, 0, 0, false);
        rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], NullDataLength, false, false);

        PageNeed = (u8)PageNum_128(TxDescLen + NullDataLength);
        PageNum += PageNeed;

        BufIndex += PageNeed*128;

        /* 3 (4) probe response * 1page */
        RsvdPageLoc.LocProbeRsp = PageNum;
        ConstructProbeRsp(adapt, &ReservedPagePacket[BufIndex], &ProbeRspLength, pnetwork->MacAddress, false);
        rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], ProbeRspLength, false, false);

        PageNeed = (u8)PageNum_128(TxDescLen + ProbeRspLength);
        PageNum += PageNeed;

        BufIndex += PageNeed*128;

        /* 3 (5) Qos null data */
        RsvdPageLoc.LocQosNull = PageNum;
        ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex],
                                  &QosNullLength, pnetwork->MacAddress, true, 0, 0, false);
        rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], QosNullLength, false, false);

        PageNeed = (u8)PageNum_128(TxDescLen + QosNullLength);
        PageNum += PageNeed;

        TotalPacketLen = BufIndex + QosNullLength;
        pmgntframe = alloc_mgtxmitframe(pxmitpriv);
        if (!pmgntframe)
                goto exit;

        /*  update attribute */
        pattrib = &pmgntframe->attrib;
        update_mgntframe_attrib(adapt, pattrib);
        pattrib->qsel = 0x10;
        pattrib->last_txcmdsz = TotalPacketLen - TXDESC_OFFSET;
        pattrib->pktlen = pattrib->last_txcmdsz;
        memcpy(pmgntframe->buf_addr, ReservedPagePacket, TotalPacketLen);

        rtw_hal_mgnt_xmit(adapt, pmgntframe);

        DBG_88E("%s: Set RSVD page location to Fw\n", __func__);
        FillH2CCmd_88E(adapt, H2C_COM_RSVD_PAGE, sizeof(RsvdPageLoc), (u8 *)&RsvdPageLoc);

exit:
        kfree(ReservedPagePacket);
}

void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
{
        struct hal_data_8188e *haldata = adapt->HalData;
        struct mlme_ext_priv *pmlmeext = &(adapt->mlmeextpriv);
        struct mlme_ext_info    *pmlmeinfo = &(pmlmeext->mlmext_info);
        bool    bSendBeacon = false;
        bool    bcn_valid = false;
        u8 DLBcnCount = 0;
        u32 poll = 0;


        DBG_88E("%s mstatus(%x)\n", __func__, mstatus);

        if (mstatus == 1) {
                /*  We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
                /*  Suggested by filen. Added by tynli. */
                usb_write16(adapt, REG_BCN_PSR_RPT, (0xC000|pmlmeinfo->aid));
                /*  Do not set TSF again here or vWiFi beacon DMA INT will not work. */

                /* Set REG_CR bit 8. DMA beacon by SW. */
                haldata->RegCR_1 |= BIT(0);
                usb_write8(adapt,  REG_CR+1, haldata->RegCR_1);

                /*  Disable Hw protection for a time which revserd for Hw sending beacon. */
                /*  Fix download reserved page packet fail that access collision with the protection time. */
                /*  2010.05.11. Added by tynli. */
                usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
                usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(4));

                if (haldata->RegFwHwTxQCtrl & BIT(6)) {
                        DBG_88E("HalDownloadRSVDPage(): There is an Adapter is sending beacon.\n");
                        bSendBeacon = true;
                }

                /*  Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. */
                usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl&(~BIT(6))));
                haldata->RegFwHwTxQCtrl &= (~BIT(6));

                /*  Clear beacon valid check bit. */
                rtw_hal_set_hwreg(adapt, HW_VAR_BCN_VALID, NULL);
                DLBcnCount = 0;
                poll = 0;
                do {
                        /*  download rsvd page. */
                        SetFwRsvdPagePkt(adapt, false);
                        DLBcnCount++;
                        do {
                                yield();
                                /* mdelay(10); */
                                /*  check rsvd page download OK. */
                                rtw_hal_get_hwreg(adapt, HW_VAR_BCN_VALID, (u8 *)(&bcn_valid));
                                poll++;
                        } while (!bcn_valid && (poll%10) != 0 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
                } while (!bcn_valid && DLBcnCount <= 100 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);

                if (adapt->bSurpriseRemoved || adapt->bDriverStopped)
                        ;
                else if (!bcn_valid)
                        DBG_88E("%s: 1 Download RSVD page failed! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
                else
                        DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
                /*  */
                /*  We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */
                /*  because we need to free the Tx BCN Desc which is used by the first reserved page packet. */
                /*  At run time, we cannot get the Tx Desc until it is released in TxHandleInterrupt() so we will return */
                /*  the beacon TCB in the following code. 2011.11.23. by tynli. */
                /*  */

                /*  Enable Bcn */
                usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(3));
                usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(4)));

                /*  To make sure that if there exists an adapter which would like to send beacon. */
                /*  If exists, the origianl value of 0x422[6] will be 1, we should check this to */
                /*  prevent from setting 0x422[6] to 0 after download reserved page, or it will cause */
                /*  the beacon cannot be sent by HW. */
                /*  2010.06.23. Added by tynli. */
                if (bSendBeacon) {
                        usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl | BIT(6)));
                        haldata->RegFwHwTxQCtrl |= BIT(6);
                }

                /*  Update RSVD page location H2C to Fw. */
                if (bcn_valid) {
                        rtw_hal_set_hwreg(adapt, HW_VAR_BCN_VALID, NULL);
                        DBG_88E("Set RSVD page location to Fw.\n");
                }

                /*  Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
                /*  Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
                haldata->RegCR_1 &= (~BIT(0));
                usb_write8(adapt,  REG_CR+1, haldata->RegCR_1);
        }
}