/*
 *  Copyright (C) 1991, 1992  Linus Torvalds
 */

/*
 * 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
 * or rs-channels. It also implements echoing, cooked mode etc.
 *
 * Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
 *
 * Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
 * tty_struct and tty_queue structures.  Previously there was an array
 * of 256 tty_struct's which was statically allocated, and the
 * tty_queue structures were allocated at boot time.  Both are now
 * dynamically allocated only when the tty is open.
 *
 * Also restructured routines so that there is more of a separation
 * between the high-level tty routines (tty_io.c and tty_ioctl.c) and
 * the low-level tty routines (serial.c, pty.c, console.c).  This
 * makes for cleaner and more compact code.  -TYT, 9/17/92
 *
 * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
 * which can be dynamically activated and de-activated by the line
 * discipline handling modules (like SLIP).
 *
 * NOTE: pay no attention to the line discipline code (yet); its
 * interface is still subject to change in this version...
 * -- TYT, 1/31/92
 *
 * Added functionality to the OPOST tty handling.  No delays, but all
 * other bits should be there.
 *      -- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
 *
 * Rewrote canonical mode and added more termios flags.
 *      -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
 *
 * Reorganized FASYNC support so mouse code can share it.
 *      -- ctm@ardi.com, 9Sep95
 *
 * New TIOCLINUX variants added.
 *      -- mj@k332.feld.cvut.cz, 19-Nov-95
 *
 * Restrict vt switching via ioctl()
 *      -- grif@cs.ucr.edu, 5-Dec-95
 *
 * Move console and virtual terminal code to more appropriate files,
 * implement CONFIG_VT and generalize console device interface.
 *      -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
 *
 * Rewrote tty_init_dev and tty_release_dev to eliminate races.
 *      -- Bill Hawes <whawes@star.net>, June 97
 *
 * Added devfs support.
 *      -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
 *
 * Added support for a Unix98-style ptmx device.
 *      -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
 *
 * Reduced memory usage for older ARM systems
 *      -- Russell King <rmk@arm.linux.org.uk>
 *
 * Move do_SAK() into process context.  Less stack use in devfs functions.
 * alloc_tty_struct() always uses kmalloc()
 *                       -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
 */

#include <linux/types.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/fcntl.h>
#include <linux/sched/signal.h>
#include <linux/sched/task.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/devpts_fs.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/console.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/kd.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/ratelimit.h>

#include <linux/uaccess.h>

#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>

#include <linux/kmod.h>
#include <linux/nsproxy.h>

#undef TTY_DEBUG_HANGUP
#ifdef TTY_DEBUG_HANGUP
# define tty_debug_hangup(tty, f, args...)      tty_debug(tty, f, ##args)
#else
# define tty_debug_hangup(tty, f, args...)      do { } while (0)
#endif

#define TTY_PARANOIA_CHECK 1
#define CHECK_TTY_COUNT 1

struct ktermios tty_std_termios = {     /* for the benefit of tty drivers  */
        .c_iflag = ICRNL | IXON,
        .c_oflag = OPOST | ONLCR,
        .c_cflag = B38400 | CS8 | CREAD | HUPCL,
        .c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
                   ECHOCTL | ECHOKE | IEXTEN,
        .c_cc = INIT_C_CC,
        .c_ispeed = 38400,
        .c_ospeed = 38400,
        /* .c_line = N_TTY, */
};

EXPORT_SYMBOL(tty_std_termios);

/* This list gets poked at by procfs and various bits of boot up code. This
   could do with some rationalisation such as pulling the tty proc function
   into this file */

LIST_HEAD(tty_drivers);                 /* linked list of tty drivers */

/* Mutex to protect creating and releasing a tty */
DEFINE_MUTEX(tty_mutex);

static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
ssize_t redirected_tty_write(struct file *, const char __user *,
                                                        size_t, loff_t *);
static unsigned int tty_poll(struct file *, poll_table *);
static int tty_open(struct inode *, struct file *);
long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
#ifdef CONFIG_COMPAT
static long tty_compat_ioctl(struct file *file, unsigned int cmd,
                                unsigned long arg);
#else
#define tty_compat_ioctl NULL
#endif
static int __tty_fasync(int fd, struct file *filp, int on);
static int tty_fasync(int fd, struct file *filp, int on);
static void release_tty(struct tty_struct *tty, int idx);

/**
 *      free_tty_struct         -       free a disused tty
 *      @tty: tty struct to free
 *
 *      Free the write buffers, tty queue and tty memory itself.
 *
 *      Locking: none. Must be called after tty is definitely unused
 */

static void free_tty_struct(struct tty_struct *tty)
{
        tty_ldisc_deinit(tty);
        put_device(tty->dev);
        kfree(tty->write_buf);
        tty->magic = 0xDEADDEAD;
        kfree(tty);
}

static inline struct tty_struct *file_tty(struct file *file)
{
        return ((struct tty_file_private *)file->private_data)->tty;
}

int tty_alloc_file(struct file *file)
{
        struct tty_file_private *priv;

        priv = kmalloc(sizeof(*priv), GFP_KERNEL);
        if (!priv)
                return -ENOMEM;

        file->private_data = priv;

        return 0;
}

/* Associate a new file with the tty structure */
void tty_add_file(struct tty_struct *tty, struct file *file)
{
        struct tty_file_private *priv = file->private_data;

        priv->tty = tty;
        priv->file = file;

        spin_lock(&tty->files_lock);
        list_add(&priv->list, &tty->tty_files);
        spin_unlock(&tty->files_lock);
}

/**
 * tty_free_file - free file->private_data
 *
 * This shall be used only for fail path handling when tty_add_file was not
 * called yet.
 */
void tty_free_file(struct file *file)
{
        struct tty_file_private *priv = file->private_data;

        file->private_data = NULL;
        kfree(priv);
}

/* Delete file from its tty */
static void tty_del_file(struct file *file)
{
        struct tty_file_private *priv = file->private_data;
        struct tty_struct *tty = priv->tty;

        spin_lock(&tty->files_lock);
        list_del(&priv->list);
        spin_unlock(&tty->files_lock);
        tty_free_file(file);
}

/**
 *      tty_name        -       return tty naming
 *      @tty: tty structure
 *
 *      Convert a tty structure into a name. The name reflects the kernel
 *      naming policy and if udev is in use may not reflect user space
 *
 *      Locking: none
 */

const char *tty_name(const struct tty_struct *tty)
{
        if (!tty) /* Hmm.  NULL pointer.  That's fun. */
                return "NULL tty";
        return tty->name;
}

EXPORT_SYMBOL(tty_name);

const char *tty_driver_name(const struct tty_struct *tty)
{
        if (!tty || !tty->driver)
                return "";
        return tty->driver->name;
}

static int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
                              const char *routine)
{
#ifdef TTY_PARANOIA_CHECK
        if (!tty) {
                pr_warn("(%d:%d): %s: NULL tty\n",
                        imajor(inode), iminor(inode), routine);
                return 1;
        }
        if (tty->magic != TTY_MAGIC) {
                pr_warn("(%d:%d): %s: bad magic number\n",
                        imajor(inode), iminor(inode), routine);
                return 1;
        }
#endif
        return 0;
}

/* Caller must hold tty_lock */
static int check_tty_count(struct tty_struct *tty, const char *routine)
{
#ifdef CHECK_TTY_COUNT
        struct list_head *p;
        int count = 0, kopen_count = 0;

        spin_lock(&tty->files_lock);
        list_for_each(p, &tty->tty_files) {
                count++;
        }
        spin_unlock(&tty->files_lock);
        if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
            tty->driver->subtype == PTY_TYPE_SLAVE &&
            tty->link && tty->link->count)
                count++;
        if (tty_port_kopened(tty->port))
                kopen_count++;
        if (tty->count != (count + kopen_count)) {
                tty_warn(tty, "%s: tty->count(%d) != (#fd's(%d) + #kopen's(%d))\n",
                         routine, tty->count, count, kopen_count);
                return (count + kopen_count);
        }
#endif
        return 0;
}

/**
 *      get_tty_driver          -       find device of a tty
 *      @dev_t: device identifier
 *      @index: returns the index of the tty
 *
 *      This routine returns a tty driver structure, given a device number
 *      and also passes back the index number.
 *
 *      Locking: caller must hold tty_mutex
 */

static struct tty_driver *get_tty_driver(dev_t device, int *index)
{
        struct tty_driver *p;

        list_for_each_entry(p, &tty_drivers, tty_drivers) {
                dev_t base = MKDEV(p->major, p->minor_start);
                if (device < base || device >= base + p->num)
                        continue;
                *index = device - base;
                return tty_driver_kref_get(p);
        }
        return NULL;
}

/**
 *      tty_dev_name_to_number  -       return dev_t for device name
 *      @name: user space name of device under /dev
 *      @number: pointer to dev_t that this function will populate
 *
 *      This function converts device names like ttyS0 or ttyUSB1 into dev_t
 *      like (4, 64) or (188, 1). If no corresponding driver is registered then
 *      the function returns -ENODEV.
 *
 *      Locking: this acquires tty_mutex to protect the tty_drivers list from
 *              being modified while we are traversing it, and makes sure to
 *              release it before exiting.
 */
int tty_dev_name_to_number(const char *name, dev_t *number)
{
        struct tty_driver *p;
        int ret;
        int index, prefix_length = 0;
        const char *str;

        for (str = name; *str && !isdigit(*str); str++)
                ;

        if (!*str)
                return -EINVAL;

        ret = kstrtoint(str, 10, &index);
        if (ret)
                return ret;

        prefix_length = str - name;
        mutex_lock(&tty_mutex);

        list_for_each_entry(p, &tty_drivers, tty_drivers)
                if (prefix_length == strlen(p->name) && strncmp(name,
                                        p->name, prefix_length) == 0) {
                        if (index < p->num) {
                                *number = MKDEV(p->major, p->minor_start + index);
                                goto out;
                        }
                }

        /* if here then driver wasn't found */
        ret = -ENODEV;
out:
        mutex_unlock(&tty_mutex);
        return ret;
}
EXPORT_SYMBOL_GPL(tty_dev_name_to_number);

#ifdef CONFIG_CONSOLE_POLL

/**
 *      tty_find_polling_driver -       find device of a polled tty
 *      @name: name string to match
 *      @line: pointer to resulting tty line nr
 *
 *      This routine returns a tty driver structure, given a name
 *      and the condition that the tty driver is capable of polled
 *      operation.
 */
struct tty_driver *tty_find_polling_driver(char *name, int *line)
{
        struct tty_driver *p, *res = NULL;
        int tty_line = 0;
        int len;
        char *str, *stp;

        for (str = name; *str; str++)
                if ((*str >= '0' && *str <= '9') || *str == ',')
                        break;
        if (!*str)
                return NULL;

        len = str - name;
        tty_line = simple_strtoul(str, &str, 10);

        mutex_lock(&tty_mutex);
        /* Search through the tty devices to look for a match */
        list_for_each_entry(p, &tty_drivers, tty_drivers) {
                if (strncmp(name, p->name, len) != 0)
                        continue;
                stp = str;
                if (*stp == ',')
                        stp++;
                if (*stp == '\0')
                        stp = NULL;

                if (tty_line >= 0 && tty_line < p->num && p->ops &&
                    p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
                        res = tty_driver_kref_get(p);
                        *line = tty_line;
                        break;
                }
        }
        mutex_unlock(&tty_mutex);

        return res;
}
EXPORT_SYMBOL_GPL(tty_find_polling_driver);
#endif

static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
                                size_t count, loff_t *ppos)
{
        return 0;
}

static ssize_t hung_up_tty_write(struct file *file, const char __user *buf,
                                 size_t count, loff_t *ppos)
{
        return -EIO;
}

/* No kernel lock held - none needed ;) */
static unsigned int hung_up_tty_poll(struct file *filp, poll_table *wait)
{
        return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
}

static long hung_up_tty_ioctl(struct file *file, unsigned int cmd,
                unsigned long arg)
{
        return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}

static long hung_up_tty_compat_ioctl(struct file *file,
                                     unsigned int cmd, unsigned long arg)
{
        return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}

static int hung_up_tty_fasync(int fd, struct file *file, int on)
{
        return -ENOTTY;
}

static void tty_show_fdinfo(struct seq_file *m, struct file *file)
{
        struct tty_struct *tty = file_tty(file);

        if (tty && tty->ops && tty->ops->show_fdinfo)
                tty->ops->show_fdinfo(tty, m);
}

static const struct file_operations tty_fops = {
        .llseek         = no_llseek,
        .read           = tty_read,
        .write          = tty_write,
        .poll           = tty_poll,
        .unlocked_ioctl = tty_ioctl,
        .compat_ioctl   = tty_compat_ioctl,
        .open           = tty_open,
        .release        = tty_release,
        .fasync         = tty_fasync,
        .show_fdinfo    = tty_show_fdinfo,
};

static const struct file_operations console_fops = {
        .llseek         = no_llseek,
        .read           = tty_read,
        .write          = redirected_tty_write,
        .poll           = tty_poll,
        .unlocked_ioctl = tty_ioctl,
        .compat_ioctl   = tty_compat_ioctl,
        .open           = tty_open,
        .release        = tty_release,
        .fasync         = tty_fasync,
};

static const struct file_operations hung_up_tty_fops = {
        .llseek         = no_llseek,
        .read           = hung_up_tty_read,
        .write          = hung_up_tty_write,
        .poll           = hung_up_tty_poll,
        .unlocked_ioctl = hung_up_tty_ioctl,
        .compat_ioctl   = hung_up_tty_compat_ioctl,
        .release        = tty_release,
        .fasync         = hung_up_tty_fasync,
};

static DEFINE_SPINLOCK(redirect_lock);
static struct file *redirect;

/**
 *      tty_wakeup      -       request more data
 *      @tty: terminal
 *
 *      Internal and external helper for wakeups of tty. This function
 *      informs the line discipline if present that the driver is ready
 *      to receive more output data.
 */

void tty_wakeup(struct tty_struct *tty)
{
        struct tty_ldisc *ld;

        if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
                ld = tty_ldisc_ref(tty);
                if (ld) {
                        if (ld->ops->write_wakeup)
                                ld->ops->write_wakeup(tty);
                        tty_ldisc_deref(ld);
                }
        }
        wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
}

EXPORT_SYMBOL_GPL(tty_wakeup);

/**
 *      __tty_hangup            -       actual handler for hangup events
 *      @work: tty device
 *
 *      This can be called by a "kworker" kernel thread.  That is process
 *      synchronous but doesn't hold any locks, so we need to make sure we
 *      have the appropriate locks for what we're doing.
 *
 *      The hangup event clears any pending redirections onto the hung up
 *      device. It ensures future writes will error and it does the needed
 *      line discipline hangup and signal delivery. The tty object itself
 *      remains intact.
 *
 *      Locking:
 *              BTM
 *                redirect lock for undoing redirection
 *                file list lock for manipulating list of ttys
 *                tty_ldiscs_lock from called functions
 *                termios_rwsem resetting termios data
 *                tasklist_lock to walk task list for hangup event
 *                  ->siglock to protect ->signal/->sighand
 */
static void __tty_hangup(struct tty_struct *tty, int exit_session)
{
        struct file *cons_filp = NULL;
        struct file *filp, *f = NULL;
        struct tty_file_private *priv;
        int    closecount = 0, n;
        int refs;

        if (!tty)
                return;


        spin_lock(&redirect_lock);
        if (redirect && file_tty(redirect) == tty) {
                f = redirect;
                redirect = NULL;
        }
        spin_unlock(&redirect_lock);

        tty_lock(tty);

        if (test_bit(TTY_HUPPED, &tty->flags)) {
                tty_unlock(tty);
                return;
        }

        /* inuse_filps is protected by the single tty lock,
           this really needs to change if we want to flush the
           workqueue with the lock held */
        check_tty_count(tty, "tty_hangup");

        spin_lock(&tty->files_lock);
        /* This breaks for file handles being sent over AF_UNIX sockets ? */
        list_for_each_entry(priv, &tty->tty_files, list) {
                filp = priv->file;
                if (filp->f_op->write == redirected_tty_write)
                        cons_filp = filp;
                if (filp->f_op->write != tty_write)
                        continue;
                closecount++;
                __tty_fasync(-1, filp, 0);      /* can't block */
                filp->f_op = &hung_up_tty_fops;
        }
        spin_unlock(&tty->files_lock);

        refs = tty_signal_session_leader(tty, exit_session);
        /* Account for the p->signal references we killed */
        while (refs--)
                tty_kref_put(tty);

        tty_ldisc_hangup(tty, cons_filp != NULL);

        spin_lock_irq(&tty->ctrl_lock);
        clear_bit(TTY_THROTTLED, &tty->flags);
        clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
        put_pid(tty->session);
        put_pid(tty->pgrp);
        tty->session = NULL;
        tty->pgrp = NULL;
        tty->ctrl_status = 0;
        spin_unlock_irq(&tty->ctrl_lock);

        /*
         * If one of the devices matches a console pointer, we
         * cannot just call hangup() because that will cause
         * tty->count and state->count to go out of sync.
         * So we just call close() the right number of times.
         */
        if (cons_filp) {
                if (tty->ops->close)
                        for (n = 0; n < closecount; n++)
                                tty->ops->close(tty, cons_filp);
        } else if (tty->ops->hangup)
                tty->ops->hangup(tty);
        /*
         * We don't want to have driver/ldisc interactions beyond the ones
         * we did here. The driver layer expects no calls after ->hangup()
         * from the ldisc side, which is now guaranteed.
         */
        set_bit(TTY_HUPPED, &tty->flags);
        tty_unlock(tty);

        if (f)
                fput(f);
}

static void do_tty_hangup(struct work_struct *work)
{
        struct tty_struct *tty =
                container_of(work, struct tty_struct, hangup_work);

        __tty_hangup(tty, 0);
}

/**
 *      tty_hangup              -       trigger a hangup event
 *      @tty: tty to hangup
 *
 *      A carrier loss (virtual or otherwise) has occurred on this like
 *      schedule a hangup sequence to run after this event.
 */

void tty_hangup(struct tty_struct *tty)
{
        tty_debug_hangup(tty, "hangup\n");
        schedule_work(&tty->hangup_work);
}

EXPORT_SYMBOL(tty_hangup);

/**
 *      tty_vhangup             -       process vhangup
 *      @tty: tty to hangup
 *
 *      The user has asked via system call for the terminal to be hung up.
 *      We do this synchronously so that when the syscall returns the process
 *      is complete. That guarantee is necessary for security reasons.
 */

void tty_vhangup(struct tty_struct *tty)
{
        tty_debug_hangup(tty, "vhangup\n");
        __tty_hangup(tty, 0);
}

EXPORT_SYMBOL(tty_vhangup);


/**
 *      tty_vhangup_self        -       process vhangup for own ctty
 *
 *      Perform a vhangup on the current controlling tty
 */

void tty_vhangup_self(void)
{
        struct tty_struct *tty;

        tty = get_current_tty();
        if (tty) {
                tty_vhangup(tty);
                tty_kref_put(tty);
        }
}

/**
 *      tty_vhangup_session             -       hangup session leader exit
 *      @tty: tty to hangup
 *
 *      The session leader is exiting and hanging up its controlling terminal.
 *      Every process in the foreground process group is signalled SIGHUP.
 *
 *      We do this synchronously so that when the syscall returns the process
 *      is complete. That guarantee is necessary for security reasons.
 */

void tty_vhangup_session(struct tty_struct *tty)
{
        tty_debug_hangup(tty, "session hangup\n");
        __tty_hangup(tty, 1);
}

/**
 *      tty_hung_up_p           -       was tty hung up
 *      @filp: file pointer of tty
 *
 *      Return true if the tty has been subject to a vhangup or a carrier
 *      loss
 */

int tty_hung_up_p(struct file *filp)
{
        return (filp && filp->f_op == &hung_up_tty_fops);
}

EXPORT_SYMBOL(tty_hung_up_p);

/**
 *      stop_tty        -       propagate flow control
 *      @tty: tty to stop
 *
 *      Perform flow control to the driver. May be called
 *      on an already stopped device and will not re-call the driver
 *      method.
 *
 *      This functionality is used by both the line disciplines for
 *      halting incoming flow and by the driver. It may therefore be
 *      called from any context, may be under the tty atomic_write_lock
 *      but not always.
 *
 *      Locking:
 *              flow_lock
 */

void __stop_tty(struct tty_struct *tty)
{
        if (tty->stopped)
                return;
        tty->stopped = 1;
        if (tty->ops->stop)
                tty->ops->stop(tty);
}

void stop_tty(struct tty_struct *tty)
{
        unsigned long flags;

        spin_lock_irqsave(&tty->flow_lock, flags);
        __stop_tty(tty);
        spin_unlock_irqrestore(&tty->flow_lock, flags);
}
EXPORT_SYMBOL(stop_tty);

/**
 *      start_tty       -       propagate flow control
 *      @tty: tty to start
 *
 *      Start a tty that has been stopped if at all possible. If this
 *      tty was previous stopped and is now being started, the driver
 *      start method is invoked and the line discipline woken.
 *
 *      Locking:
 *              flow_lock
 */

void __start_tty(struct tty_struct *tty)
{
        if (!tty->stopped || tty->flow_stopped)
                return;
        tty->stopped = 0;
        if (tty->ops->start)
                tty->ops->start(tty);
        tty_wakeup(tty);
}

void start_tty(struct tty_struct *tty)
{
        unsigned long flags;

        spin_lock_irqsave(&tty->flow_lock, flags);
        __start_tty(tty);
        spin_unlock_irqrestore(&tty->flow_lock, flags);
}
EXPORT_SYMBOL(start_tty);

static void tty_update_time(struct timespec *time)
{
        unsigned long sec = get_seconds();

        /*
         * We only care if the two values differ in anything other than the
         * lower three bits (i.e every 8 seconds).  If so, then we can update
         * the time of the tty device, otherwise it could be construded as a
         * security leak to let userspace know the exact timing of the tty.
         */
        if ((sec ^ time->tv_sec) & ~7)
                time->tv_sec = sec;
}

/**
 *      tty_read        -       read method for tty device files
 *      @file: pointer to tty file
 *      @buf: user buffer
 *      @count: size of user buffer
 *      @ppos: unused
 *
 *      Perform the read system call function on this terminal device. Checks
 *      for hung up devices before calling the line discipline method.
 *
 *      Locking:
 *              Locks the line discipline internally while needed. Multiple
 *      read calls may be outstanding in parallel.
 */

static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
                        loff_t *ppos)
{
        int i;
        struct inode *inode = file_inode(file);
        struct tty_struct *tty = file_tty(file);
        struct tty_ldisc *ld;

        if (tty_paranoia_check(tty, inode, "tty_read"))
                return -EIO;
        if (!tty || tty_io_error(tty))
                return -EIO;

        /* We want to wait for the line discipline to sort out in this
           situation */
        ld = tty_ldisc_ref_wait(tty);
        if (!ld)
                return hung_up_tty_read(file, buf, count, ppos);
        if (ld->ops->read)
                i = ld->ops->read(tty, file, buf, count);
        else
                i = -EIO;
        tty_ldisc_deref(ld);

        if (i > 0)
                tty_update_time(&inode->i_atime);

        return i;
}

static void tty_write_unlock(struct tty_struct *tty)
{
        mutex_unlock(&tty->atomic_write_lock);
        wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
}

static int tty_write_lock(struct tty_struct *tty, int ndelay)
{
        if (!mutex_trylock(&tty->atomic_write_lock)) {
                if (ndelay)
                        return -EAGAIN;
                if (mutex_lock_interruptible(&tty->atomic_write_lock))
                        return -ERESTARTSYS;
        }
        return 0;
}

/*
 * Split writes up in sane blocksizes to avoid
 * denial-of-service type attacks
 */
static inline ssize_t do_tty_write(
        ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t),
        struct tty_struct *tty,
        struct file *file,
        const char __user *buf,
        size_t count)
{
        ssize_t ret, written = 0;
        unsigned int chunk;

        ret = tty_write_lock(tty, file->f_flags & O_NDELAY);
        if (ret < 0)
                return ret;

        /*
         * We chunk up writes into a temporary buffer. This
         * simplifies low-level drivers immensely, since they
         * don't have locking issues and user mode accesses.
         *
         * But if TTY_NO_WRITE_SPLIT is set, we should use a
         * big chunk-size..
         *
         * The default chunk-size is 2kB, because the NTTY
         * layer has problems with bigger chunks. It will
         * claim to be able to handle more characters than
         * it actually does.
         *
         * FIXME: This can probably go away now except that 64K chunks
         * are too likely to fail unless switched to vmalloc...
         */
        chunk = 2048;
        if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
                chunk = 65536;
        if (count < chunk)
                chunk = count;

        /* write_buf/write_cnt is protected by the atomic_write_lock mutex */
        if (tty->write_cnt < chunk) {
                unsigned char *buf_chunk;

                if (chunk < 1024)
                        chunk = 1024;

                buf_chunk = kmalloc(chunk, GFP_KERNEL);
                if (!buf_chunk) {
                        ret = -ENOMEM;
                        goto out;
                }
                kfree(tty->write_buf);
                tty->write_cnt = chunk;
                tty->write_buf = buf_chunk;
        }

        /* Do the write .. */
        for (;;) {
                size_t size = count;
                if (size > chunk)
                        size = chunk;
                ret = -EFAULT;
                if (copy_from_user(tty->write_buf, buf, size))
                        break;
                ret = write(tty, file, tty->write_buf, size);
                if (ret <= 0)
                        break;
                written += ret;
                buf += ret;
                count -= ret;
                if (!count)
                        break;
                ret = -ERESTARTSYS;
                if (signal_pending(current))
                        break;
                cond_resched();
        }
        if (written) {
                tty_update_time(&file_inode(file)->i_mtime);
                ret = written;
        }
out:
        tty_write_unlock(tty);
        return ret;
}

/**
 * tty_write_message - write a message to a certain tty, not just the console.
 * @tty: the destination tty_struct
 * @msg: the message to write
 *
 * This is used for messages that need to be redirected to a specific tty.
 * We don't put it into the syslog queue right now maybe in the future if
 * really needed.
 *
 * We must still hold the BTM and test the CLOSING flag for the moment.
 */

void tty_write_message(struct tty_struct *tty, char *msg)
{
        if (tty) {
                mutex_lock(&tty->atomic_write_lock);
                tty_lock(tty);
                if (tty->ops->write && tty->count > 0)
                        tty->ops->write(tty, msg, strlen(msg));
                tty_unlock(tty);
                tty_write_unlock(tty);
        }
        return;
}


/**
 *      tty_write               -       write method for tty device file
 *      @file: tty file pointer
 *      @buf: user data to write
 *      @count: bytes to write

 *      @ppos: unused
 *
 *      Write data to a tty device via the line discipline.
 *
 *      Locking:
 *              Locks the line discipline as required
 *              Writes to the tty driver are serialized by the atomic_write_lock
 *      and are then processed in chunks to the device. The line discipline
 *      write method will not be invoked in parallel for each device.
 */

static ssize_t tty_write(struct file *file, const char __user *buf,
                                                size_t count, loff_t *ppos)
{
        struct tty_struct *tty = file_tty(file);
        struct tty_ldisc *ld;
        ssize_t ret;

        if (tty_paranoia_check(tty, file_inode(file), "tty_write"))
                return -EIO;
        if (!tty || !tty->ops->write || tty_io_error(tty))
                        return -EIO;
        /* Short term debug to catch buggy drivers */
        if (tty->ops->write_room == NULL)
                tty_err(tty, "missing write_room method\n");
        ld = tty_ldisc_ref_wait(tty);
        if (!ld)
                return hung_up_tty_write(file, buf, count, ppos);
        if (!ld->ops->write)
                ret = -EIO;
        else
                ret = do_tty_write(ld->ops->write, tty, file, buf, count);
        tty_ldisc_deref(ld);
        return ret;
}

ssize_t redirected_tty_write(struct file *file, const char __user *buf,
                                                size_t count, loff_t *ppos)
{
        struct file *p = NULL;

        spin_lock(&redirect_lock);
        if (redirect)
                p = get_file(redirect);
        spin_unlock(&redirect_lock);

        if (p) {
                ssize_t res;
                res = vfs_write(p, buf, count, &p->f_pos);
                fput(p);
                return res;
        }
        return tty_write(file, buf, count, ppos);
}

/**
 *      tty_send_xchar  -       send priority character
 *
 *      Send a high priority character to the tty even if stopped
 *
 *      Locking: none for xchar method, write ordering for write method.
 */

int tty_send_xchar(struct tty_struct *tty, char ch)
{
        int     was_stopped = tty->stopped;

        if (tty->ops->send_xchar) {
                down_read(&tty->termios_rwsem);
                tty->ops->send_xchar(tty, ch);
                up_read(&tty->termios_rwsem);
                return 0;
        }

        if (tty_write_lock(tty, 0) < 0)
                return -ERESTARTSYS;

        down_read(&tty->termios_rwsem);
        if (was_stopped)
                start_tty(tty);
        tty->ops->write(tty, &ch, 1);
        if (was_stopped)
                stop_tty(tty);
        up_read(&tty->termios_rwsem);
        tty_write_unlock(tty);
        return 0;
}

static char ptychar[] = "pqrstuvwxyzabcde";

/**
 *      pty_line_name   -       generate name for a pty
 *      @driver: the tty driver in use
 *      @index: the minor number
 *      @p: output buffer of at least 6 bytes
 *
 *      Generate a name from a driver reference and write it to the output
 *      buffer.
 *
 *      Locking: None
 */
static void pty_line_name(struct tty_driver *driver, int index, char *p)
{
        int i = index + driver->name_base;
        /* ->name is initialized to "ttyp", but "tty" is expected */
        sprintf(p, "%s%c%x",
                driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
                ptychar[i >> 4 & 0xf], i & 0xf);
}

/**
 *      tty_line_name   -       generate name for a tty
 *      @driver: the tty driver in use
 *      @index: the minor number
 *      @p: output buffer of at least 7 bytes
 *
 *      Generate a name from a driver reference and write it to the output
 *      buffer.
 *
 *      Locking: None
 */
static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
{
        if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
                return sprintf(p, "%s", driver->name);
        else
                return sprintf(p, "%s%d", driver->name,
                               index + driver->name_base);
}

/**
 *      tty_driver_lookup_tty() - find an existing tty, if any
 *      @driver: the driver for the tty
 *      @idx:    the minor number
 *
 *      Return the tty, if found. If not found, return NULL or ERR_PTR() if the
 *      driver lookup() method returns an error.
 *
 *      Locking: tty_mutex must be held. If the tty is found, bump the tty kref.
 */
static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
                struct file *file, int idx)
{
        struct tty_struct *tty;

        if (driver->ops->lookup)
                if (!file)
                        tty = ERR_PTR(-EIO);
                else
                        tty = driver->ops->lookup(driver, file, idx);
        else
                tty = driver->ttys[idx];

        if (!IS_ERR(tty))
                tty_kref_get(tty);
        return tty;
}

/**
 *      tty_init_termios        -  helper for termios setup
 *      @tty: the tty to set up
 *
 *      Initialise the termios structures for this tty. Thus runs under
 *      the tty_mutex currently so we can be relaxed about ordering.
 */

void tty_init_termios(struct tty_struct *tty)
{
        struct ktermios *tp;
        int idx = tty->index;

        if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
                tty->termios = tty->driver->init_termios;
        else {
                /* Check for lazy saved data */
                tp = tty->driver->termios[idx];
                if (tp != NULL) {
                        tty->termios = *tp;
                        tty->termios.c_line  = tty->driver->init_termios.c_line;
                } else
                        tty->termios = tty->driver->init_termios;
        }
        /* Compatibility until drivers always set this */
        tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
        tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
}
EXPORT_SYMBOL_GPL(tty_init_termios);

int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
{
        tty_init_termios(tty);
        tty_driver_kref_get(driver);
        tty->count++;
        driver->ttys[tty->index] = tty;
        return 0;
}
EXPORT_SYMBOL_GPL(tty_standard_install);

/**
 *      tty_driver_install_tty() - install a tty entry in the driver
 *      @driver: the driver for the tty
 *      @tty: the tty
 *
 *      Install a tty object into the driver tables. The tty->index field
 *      will be set by the time this is called. This method is responsible
 *      for ensuring any need additional structures are allocated and
 *      configured.
 *
 *      Locking: tty_mutex for now
 */
static int tty_driver_install_tty(struct tty_driver *driver,
                                                struct tty_struct *tty)
{
        return driver->ops->install ? driver->ops->install(driver, tty) :
                tty_standard_install(driver, tty);
}

/**
 *      tty_driver_remove_tty() - remove a tty from the driver tables
 *      @driver: the driver for the tty
 *      @idx:    the minor number
 *
 *      Remvoe a tty object from the driver tables. The tty->index field
 *      will be set by the time this is called.
 *
 *      Locking: tty_mutex for now
 */
static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
{
        if (driver->ops->remove)
                driver->ops->remove(driver, tty);
        else
                driver->ttys[tty->index] = NULL;
}

/*
 *      tty_reopen()    - fast re-open of an open tty
 *      @tty    - the tty to open
 *
 *      Return 0 on success, -errno on error.
 *      Re-opens on master ptys are not allowed and return -EIO.
 *
 *      Locking: Caller must hold tty_lock
 */
static int tty_reopen(struct tty_struct *tty)
{
        struct tty_driver *driver = tty->driver;

        if (driver->type == TTY_DRIVER_TYPE_PTY &&
            driver->subtype == PTY_TYPE_MASTER)
                return -EIO;

        if (!tty->count)
                return -EAGAIN;

        if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
                return -EBUSY;

        tty->count++;

        if (!tty->ldisc)
                return tty_ldisc_reinit(tty, tty->termios.c_line);

        return 0;
}

/**
 *      tty_init_dev            -       initialise a tty device
 *      @driver: tty driver we are opening a device on
 *      @idx: device index
 *      @ret_tty: returned tty structure
 *
 *      Prepare a tty device. This may not be a "new" clean device but
 *      could also be an active device. The pty drivers require special
 *      handling because of this.
 *
 *      Locking:
 *              The function is called under the tty_mutex, which
 *      protects us from the tty struct or driver itself going away.
 *
 *      On exit the tty device has the line discipline attached and
 *      a reference count of 1. If a pair was created for pty/tty use
 *      and the other was a pty master then it too has a reference count of 1.
 *
 * WSH 06/09/97: Rewritten to remove races and properly clean up after a
 * failed open.  The new code protects the open with a mutex, so it's
 * really quite straightforward.  The mutex locking can probably be
 * relaxed for the (most common) case of reopening a tty.
 */

struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
{
        struct tty_struct *tty;
        int retval;

        /*
         * First time open is complex, especially for PTY devices.
         * This code guarantees that either everything succeeds and the
         * TTY is ready for operation, or else the table slots are vacated
         * and the allocated memory released.  (Except that the termios
         * may be retained.)
         */

        if (!try_module_get(driver->owner))
                return ERR_PTR(-ENODEV);

        tty = alloc_tty_struct(driver, idx);
        if (!tty) {
                retval = -ENOMEM;
                goto err_module_put;
        }

        tty_lock(tty);
        retval = tty_driver_install_tty(driver, tty);
        if (retval < 0)
                goto err_free_tty;

        if (!tty->port)
                tty->port = driver->ports[idx];

        WARN_RATELIMIT(!tty->port,
                        "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
                        __func__, tty->driver->name);

        tty->port->itty = tty;

        /*
         * Structures all installed ... call the ldisc open routines.
         * If we fail here just call release_tty to clean up.  No need
         * to decrement the use counts, as release_tty doesn't care.
         */
        retval = tty_ldisc_setup(tty, tty->link);
        if (retval)
                goto err_release_tty;
        /* Return the tty locked so that it cannot vanish under the caller */
        return tty;

err_free_tty:
        tty_unlock(tty);
        free_tty_struct(tty);
err_module_put:
        module_put(driver->owner);
        return ERR_PTR(retval);

        /* call the tty release_tty routine to clean out this slot */
err_release_tty:
        tty_unlock(tty);
        tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n",
                             retval, idx);
        release_tty(tty, idx);
        return ERR_PTR(retval);
}

static void tty_free_termios(struct tty_struct *tty)
{
        struct ktermios *tp;
        int idx = tty->index;

        /* If the port is going to reset then it has no termios to save */
        if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
                return;

        /* Stash the termios data */
        tp = tty->driver->termios[idx];
        if (tp == NULL) {
                tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
                if (tp == NULL)
                        return;
                tty->driver->termios[idx] = tp;
        }
        *tp = tty->termios;
}

/**
 *      tty_flush_works         -       flush all works of a tty/pty pair
 *      @tty: tty device to flush works for (or either end of a pty pair)
 *
 *      Sync flush all works belonging to @tty (and the 'other' tty).
 */
static void tty_flush_works(struct tty_struct *tty)
{
        flush_work(&tty->SAK_work);
        flush_work(&tty->hangup_work);
        if (tty->link) {
                flush_work(&tty->link->SAK_work);
                flush_work(&tty->link->hangup_work);
        }
}

/**
 *      release_one_tty         -       release tty structure memory
 *      @kref: kref of tty we are obliterating
 *
 *      Releases memory associated with a tty structure, and clears out the
 *      driver table slots. This function is called when a device is no longer
 *      in use. It also gets called when setup of a device fails.
 *
 *      Locking:
 *              takes the file list lock internally when working on the list
 *      of ttys that the driver keeps.
 *
 *      This method gets called from a work queue so that the driver private
 *      cleanup ops can sleep (needed for USB at least)
 */
static void release_one_tty(struct work_struct *work)
{
        struct tty_struct *tty =
                container_of(work, struct tty_struct, hangup_work);
        struct tty_driver *driver = tty->driver;
        struct module *owner = driver->owner;

        if (tty->ops->cleanup)
                tty->ops->cleanup(tty);

        tty->magic = 0;
        tty_driver_kref_put(driver);
        module_put(owner);

        spin_lock(&tty->files_lock);
        list_del_init(&tty->tty_files);
        spin_unlock(&tty->files_lock);

        put_pid(tty->pgrp);
        put_pid(tty->session);
        free_tty_struct(tty);
}

static void queue_release_one_tty(struct kref *kref)
{
        struct tty_struct *tty = container_of(kref, struct tty_struct, kref);

        /* The hangup queue is now free so we can reuse it rather than
           waste a chunk of memory for each port */
        INIT_WORK(&tty->hangup_work, release_one_tty);
        schedule_work(&tty->hangup_work);
}

/**
 *      tty_kref_put            -       release a tty kref
 *      @tty: tty device
 *
 *      Release a reference to a tty device and if need be let the kref
 *      layer destruct the object for us
 */

void tty_kref_put(struct tty_struct *tty)
{
        if (tty)
                kref_put(&tty->kref, queue_release_one_tty);
}
EXPORT_SYMBOL(tty_kref_put);

/**
 *      release_tty             -       release tty structure memory
 *
 *      Release both @tty and a possible linked partner (think pty pair),
 *      and decrement the refcount of the backing module.
 *
 *      Locking:
 *              tty_mutex
 *              takes the file list lock internally when working on the list
 *      of ttys that the driver keeps.
 *
 */
static void release_tty(struct tty_struct *tty, int idx)
{
        /* This should always be true but check for the moment */
        WARN_ON(tty->index != idx);
        WARN_ON(!mutex_is_locked(&tty_mutex));
        if (tty->ops->shutdown)
                tty->ops->shutdown(tty);
        tty_free_termios(tty);
        tty_driver_remove_tty(tty->driver, tty);
        tty->port->itty = NULL;
        if (tty->link)
                tty->link->port->itty = NULL;
        tty_buffer_cancel_work(tty->port);

        tty_kref_put(tty->link);
        tty_kref_put(tty);
}

/**
 *      tty_release_checks - check a tty before real release
 *      @tty: tty to check
 *      @o_tty: link of @tty (if any)
 *      @idx: index of the tty
 *
 *      Performs some paranoid checking before true release of the @tty.
 *      This is a no-op unless TTY_PARANOIA_CHECK is defined.
 */
static int tty_release_checks(struct tty_struct *tty, int idx)
{
#ifdef TTY_PARANOIA_CHECK
        if (idx < 0 || idx >= tty->driver->num) {
                tty_debug(tty, "bad idx %d\n", idx);
                return -1;
        }

        /* not much to check for devpts */
        if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)
                return 0;

        if (tty != tty->driver->ttys[idx]) {
                tty_debug(tty, "bad driver table[%d] = %p\n",
                          idx, tty->driver->ttys[idx]);
                return -1;
        }
        if (tty->driver->other) {
                struct tty_struct *o_tty = tty->link;

                if (o_tty != tty->driver->other->ttys[idx]) {
                        tty_debug(tty, "bad other table[%d] = %p\n",
                                  idx, tty->driver->other->ttys[idx]);
                        return -1;
                }
                if (o_tty->link != tty) {
                        tty_debug(tty, "bad link = %p\n", o_tty->link);
                        return -1;
                }
        }
#endif
        return 0;
}

/**
 *      tty_kclose      -       closes tty opened by tty_kopen
 *      @tty: tty device
 *
 *      Performs the final steps to release and free a tty device. It is the
 *      same as tty_release_struct except that it also resets TTY_PORT_KOPENED
 *      flag on tty->port.
 */
void tty_kclose(struct tty_struct *tty)
{
        /*
         * Ask the line discipline code to release its structures
         */
        tty_ldisc_release(tty);

        /* Wait for pending work before tty destruction commmences */
        tty_flush_works(tty);

        tty_debug_hangup(tty, "freeing structure\n");
        /*
         * The release_tty function takes care of the details of clearing
         * the slots and preserving the termios structure. The tty_unlock_pair
         * should be safe as we keep a kref while the tty is locked (so the
         * unlock never unlocks a freed tty).
         */
        mutex_lock(&tty_mutex);
        tty_port_set_kopened(tty->port, 0);
        release_tty(tty, tty->index);
        mutex_unlock(&tty_mutex);
}
EXPORT_SYMBOL_GPL(tty_kclose);

/**
 *      tty_release_struct      -       release a tty struct
 *      @tty: tty device
 *      @idx: index of the tty
 *
 *      Performs the final steps to release and free a tty device. It is
 *      roughly the reverse of tty_init_dev.
 */
void tty_release_struct(struct tty_struct *tty, int idx)
{
        /*
         * Ask the line discipline code to release its structures
         */
        tty_ldisc_release(tty);

        /* Wait for pending work before tty destruction commmences */
        tty_flush_works(tty);

        tty_debug_hangup(tty, "freeing structure\n");
        /*
         * The release_tty function takes care of the details of clearing
         * the slots and preserving the termios structure. The tty_unlock_pair
         * should be safe as we keep a kref while the tty is locked (so the
         * unlock never unlocks a freed tty).
         */
        mutex_lock(&tty_mutex);
        release_tty(tty, idx);
        mutex_unlock(&tty_mutex);
}
EXPORT_SYMBOL_GPL(tty_release_struct);

/**
 *      tty_release             -       vfs callback for close
 *      @inode: inode of tty
 *      @filp: file pointer for handle to tty
 *
 *      Called the last time each file handle is closed that references
 *      this tty. There may however be several such references.
 *
 *      Locking:
 *              Takes bkl. See tty_release_dev
 *
 * Even releasing the tty structures is a tricky business.. We have
 * to be very careful that the structures are all released at the
 * same time, as interrupts might otherwise get the wrong pointers.
 *
 * WSH 09/09/97: rewritten to avoid some nasty race conditions that could
 * lead to double frees or releasing memory still in use.
 */

int tty_release(struct inode *inode, struct file *filp)
{
        struct tty_struct *tty = file_tty(filp);
        struct tty_struct *o_tty = NULL;
        int     do_sleep, final;
        int     idx;
        long    timeout = 0;
        int     once = 1;

        if (tty_paranoia_check(tty, inode, __func__))
                return 0;

        tty_lock(tty);
        check_tty_count(tty, __func__);

        __tty_fasync(-1, filp, 0);

        idx = tty->index;
        if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
            tty->driver->subtype == PTY_TYPE_MASTER)
                o_tty = tty->link;

        if (tty_release_checks(tty, idx)) {
                tty_unlock(tty);
                return 0;
        }

        tty_debug_hangup(tty, "releasing (count=%d)\n", tty->count);

        if (tty->ops->close)
                tty->ops->close(tty, filp);

        /* If tty is pty master, lock the slave pty (stable lock order) */
        tty_lock_slave(o_tty);

        /*
         * Sanity check: if tty->count is going to zero, there shouldn't be
         * any waiters on tty->read_wait or tty->write_wait.  We test the
         * wait queues and kick everyone out _before_ actually starting to
         * close.  This ensures that we won't block while releasing the tty
         * structure.
         *
         * The test for the o_tty closing is necessary, since the master and
         * slave sides may close in any order.  If the slave side closes out
         * first, its count will be one, since the master side holds an open.
         * Thus this test wouldn't be triggered at the time the slave closed,
         * so we do it now.
         */
        while (1) {
                do_sleep = 0;

                if (tty->count <= 1) {
                        if (waitqueue_active(&tty->read_wait)) {
                                wake_up_poll(&tty->read_wait, POLLIN);
                                do_sleep++;
                        }
                        if (waitqueue_active(&tty->write_wait)) {
                                wake_up_poll(&tty->write_wait, POLLOUT);
                                do_sleep++;
                        }
                }
                if (o_tty && o_tty->count <= 1) {
                        if (waitqueue_active(&o_tty->read_wait)) {
                                wake_up_poll(&o_tty->read_wait, POLLIN);
                                do_sleep++;
                        }
                        if (waitqueue_active(&o_tty->write_wait)) {
                                wake_up_poll(&o_tty->write_wait, POLLOUT);
                                do_sleep++;
                        }
                }
                if (!do_sleep)
                        break;

                if (once) {
                        once = 0;
                        tty_warn(tty, "read/write wait queue active!\n");
                }
                schedule_timeout_killable(timeout);
                if (timeout < 120 * HZ)
                        timeout = 2 * timeout + 1;
                else
                        timeout = MAX_SCHEDULE_TIMEOUT;
        }

        if (o_tty) {
                if (--o_tty->count < 0) {
                        tty_warn(tty, "bad slave count (%d)\n", o_tty->count);
                        o_tty->count = 0;
                }
        }
        if (--tty->count < 0) {
                tty_warn(tty, "bad tty->count (%d)\n", tty->count);
                tty->count = 0;
        }

        /*
         * We've decremented tty->count, so we need to remove this file
         * descriptor off the tty->tty_files list; this serves two
         * purposes:
         *  - check_tty_count sees the correct number of file descriptors
         *    associated with this tty.
         *  - do_tty_hangup no longer sees this file descriptor as
         *    something that needs to be handled for hangups.
         */
        tty_del_file(filp);

        /*
         * Perform some housekeeping before deciding whether to return.
         *
         * If _either_ side is closing, make sure there aren't any
         * processes that still think tty or o_tty is their controlling
         * tty.
         */
        if (!tty->count) {
                read_lock(&tasklist_lock);
                session_clear_tty(tty->session);
                if (o_tty)
                        session_clear_tty(o_tty->session);
                read_unlock(&tasklist_lock);
        }

        /* check whether both sides are closing ... */
        final = !tty->count && !(o_tty && o_tty->count);

        tty_unlock_slave(o_tty);
        tty_unlock(tty);

        /* At this point, the tty->count == 0 should ensure a dead tty
           cannot be re-opened by a racing opener */

        if (!final)
                return 0;

        tty_debug_hangup(tty, "final close\n");

        tty_release_struct(tty, idx);
        return 0;
}

/**
 *      tty_open_current_tty - get locked tty of current task
 *      @device: device number
 *      @filp: file pointer to tty
 *      @return: locked tty of the current task iff @device is /dev/tty
 *
 *      Performs a re-open of the current task's controlling tty.
 *
 *      We cannot return driver and index like for the other nodes because
 *      devpts will not work then. It expects inodes to be from devpts FS.
 */
static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
{
        struct tty_struct *tty;
        int retval;

        if (device != MKDEV(TTYAUX_MAJOR, 0))
                return NULL;

        tty = get_current_tty();
        if (!tty)
                return ERR_PTR(-ENXIO);

        filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
        /* noctty = 1; */
        tty_lock(tty);
        tty_kref_put(tty);      /* safe to drop the kref now */

        retval = tty_reopen(tty);
        if (retval < 0) {
                tty_unlock(tty);
                tty = ERR_PTR(retval);
        }
        return tty;
}

/**
 *      tty_lookup_driver - lookup a tty driver for a given device file
 *      @device: device number
 *      @filp: file pointer to tty
 *      @index: index for the device in the @return driver
 *      @return: driver for this inode (with increased refcount)
 *
 *      If @return is not erroneous, the caller is responsible to decrement the
 *      refcount by tty_driver_kref_put.
 *
 *      Locking: tty_mutex protects get_tty_driver
 */
static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
                int *index)
{
        struct tty_driver *driver;

        switch (device) {
#ifdef CONFIG_VT
        case MKDEV(TTY_MAJOR, 0): {
                extern struct tty_driver *console_driver;
                driver = tty_driver_kref_get(console_driver);
                *index = fg_console;
                break;
        }
#endif
        case MKDEV(TTYAUX_MAJOR, 1): {
                struct tty_driver *console_driver = console_device(index);
                if (console_driver) {
                        driver = tty_driver_kref_get(console_driver);
                        if (driver && filp) {
                                /* Don't let /dev/console block */
                                filp->f_flags |= O_NONBLOCK;
                                break;
                        }
                }
                return ERR_PTR(-ENODEV);
        }
        default:
                driver = get_tty_driver(device, index);
                if (!driver)
                        return ERR_PTR(-ENODEV);
                break;
        }
        return driver;
}

/**
 *      tty_kopen       -       open a tty device for kernel
 *      @device: dev_t of device to open
 *
 *      Opens tty exclusively for kernel. Performs the driver lookup,
 *      makes sure it's not already opened and performs the first-time
 *      tty initialization.
 *
 *      Returns the locked initialized &tty_struct
 *
 *      Claims the global tty_mutex to serialize:
 *        - concurrent first-time tty initialization
 *        - concurrent tty driver removal w/ lookup
 *        - concurrent tty removal from driver table
 */
struct tty_struct *tty_kopen(dev_t device)
{
        struct tty_struct *tty;
        struct tty_driver *driver = NULL;
        int index = -1;

        mutex_lock(&tty_mutex);
        driver = tty_lookup_driver(device, NULL, &index);
        if (IS_ERR(driver)) {
                mutex_unlock(&tty_mutex);
                return ERR_CAST(driver);
        }

        /* check whether we're reopening an existing tty */
        tty = tty_driver_lookup_tty(driver, NULL, index);
        if (IS_ERR(tty))
                goto out;

        if (tty) {
                /* drop kref from tty_driver_lookup_tty() */
                tty_kref_put(tty);
                tty = ERR_PTR(-EBUSY);
        } else { /* tty_init_dev returns tty with the tty_lock held */
                tty = tty_init_dev(driver, index);
                if (IS_ERR(tty))
                        goto out;
                tty_port_set_kopened(tty->port, 1);
        }
out:
        mutex_unlock(&tty_mutex);
        tty_driver_kref_put(driver);
        return tty;
}
EXPORT_SYMBOL_GPL(tty_kopen);

/**
 *      tty_open_by_driver      -       open a tty device
 *      @device: dev_t of device to open
 *      @inode: inode of device file
 *      @filp: file pointer to tty
 *
 *      Performs the driver lookup, checks for a reopen, or otherwise
 *      performs the first-time tty initialization.
 *
 *      Returns the locked initialized or re-opened &tty_struct
 *
 *      Claims the global tty_mutex to serialize:
 *        - concurrent first-time tty initialization
 *        - concurrent tty driver removal w/ lookup
 *        - concurrent tty removal from driver table
 */
static struct tty_struct *tty_open_by_driver(dev_t device, struct inode *inode,
                                             struct file *filp)
{
        struct tty_struct *tty;
        struct tty_driver *driver = NULL;
        int index = -1;
        int retval;

        mutex_lock(&tty_mutex);
        driver = tty_lookup_driver(device, filp, &index);
        if (IS_ERR(driver)) {
                mutex_unlock(&tty_mutex);
                return ERR_CAST(driver);
        }

        /* check whether we're reopening an existing tty */
        tty = tty_driver_lookup_tty(driver, filp, index);
        if (IS_ERR(tty)) {
                mutex_unlock(&tty_mutex);
                goto out;
        }

        if (tty) {
                if (tty_port_kopened(tty->port)) {
                        tty_kref_put(tty);
                        mutex_unlock(&tty_mutex);
                        tty = ERR_PTR(-EBUSY);
                        goto out;
                }
                mutex_unlock(&tty_mutex);
                retval = tty_lock_interruptible(tty);
                tty_kref_put(tty);  /* drop kref from tty_driver_lookup_tty() */
                if (retval) {
                        if (retval == -EINTR)
                                retval = -ERESTARTSYS;
                        tty = ERR_PTR(retval);
                        goto out;
                }
                retval = tty_reopen(tty);
                if (retval < 0) {
                        tty_unlock(tty);
                        tty = ERR_PTR(retval);
                }
        } else { /* Returns with the tty_lock held for now */
                tty = tty_init_dev(driver, index);
                mutex_unlock(&tty_mutex);
        }
out:
        tty_driver_kref_put(driver);
        return tty;
}

/**
 *      tty_open                -       open a tty device
 *      @inode: inode of device file
 *      @filp: file pointer to tty
 *
 *      tty_open and tty_release keep up the tty count that contains the
 *      number of opens done on a tty. We cannot use the inode-count, as
 *      different inodes might point to the same tty.
 *
 *      Open-counting is needed for pty masters, as well as for keeping
 *      track of serial lines: DTR is dropped when the last close happens.
 *      (This is not done solely through tty->count, now.  - Ted 1/27/92)
 *
 *      The termios state of a pty is reset on first open so that
 *      settings don't persist across reuse.
 *
 *      Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
 *               tty->count should protect the rest.
 *               ->siglock protects ->signal/->sighand
 *
 *      Note: the tty_unlock/lock cases without a ref are only safe due to
 *      tty_mutex
 */

static int tty_open(struct inode *inode, struct file *filp)
{
        struct tty_struct *tty;
        int noctty, retval;
        dev_t device = inode->i_rdev;
        unsigned saved_flags = filp->f_flags;

        nonseekable_open(inode, filp);

retry_open:
        retval = tty_alloc_file(filp);
        if (retval)
                return -ENOMEM;

        tty = tty_open_current_tty(device, filp);
        if (!tty)
                tty = tty_open_by_driver(device, inode, filp);

        if (IS_ERR(tty)) {
                tty_free_file(filp);
                retval = PTR_ERR(tty);
                if (retval != -EAGAIN || signal_pending(current))
                        return retval;
                schedule();
                goto retry_open;
        }

        tty_add_file(tty, filp);

        check_tty_count(tty, __func__);
        tty_debug_hangup(tty, "opening (count=%d)\n", tty->count);

        if (tty->ops->open)
                retval = tty->ops->open(tty, filp);
        else
                retval = -ENODEV;
        filp->f_flags = saved_flags;

        if (retval) {
                tty_debug_hangup(tty, "open error %d, releasing\n", retval);

                tty_unlock(tty); /* need to call tty_release without BTM */
                tty_release(inode, filp);
                if (retval != -ERESTARTSYS)
                        return retval;

                if (signal_pending(current))
                        return retval;

                schedule();
                /*
                 * Need to reset f_op in case a hangup happened.
                 */
                if (tty_hung_up_p(filp))
                        filp->f_op = &tty_fops;
                goto retry_open;
        }
        clear_bit(TTY_HUPPED, &tty->flags);

        noctty = (filp->f_flags & O_NOCTTY) ||
                 (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) ||
                 device == MKDEV(TTYAUX_MAJOR, 1) ||
                 (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
                  tty->driver->subtype == PTY_TYPE_MASTER);
        if (!noctty)
                tty_open_proc_set_tty(filp, tty);
        tty_unlock(tty);
        return 0;
}



/**
 *      tty_poll        -       check tty status
 *      @filp: file being polled
 *      @wait: poll wait structures to update
 *
 *      Call the line discipline polling method to obtain the poll
 *      status of the device.
 *
 *      Locking: locks called line discipline but ldisc poll method
 *      may be re-entered freely by other callers.
 */

static unsigned int tty_poll(struct file *filp, poll_table *wait)
{
        struct tty_struct *tty = file_tty(filp);
        struct tty_ldisc *ld;
        int ret = 0;

        if (tty_paranoia_check(tty, file_inode(filp), "tty_poll"))
                return 0;

        ld = tty_ldisc_ref_wait(tty);
        if (!ld)
                return hung_up_tty_poll(filp, wait);
        if (ld->ops->poll)
                ret = ld->ops->poll(tty, filp, wait);
        tty_ldisc_deref(ld);
        return ret;
}

static int __tty_fasync(int fd, struct file *filp, int on)
{
        struct tty_struct *tty = file_tty(filp);
        unsigned long flags;
        int retval = 0;

        if (tty_paranoia_check(tty, file_inode(filp), "tty_fasync"))
                goto out;

        retval = fasync_helper(fd, filp, on, &tty->fasync);
        if (retval <= 0)
                goto out;

        if (on) {
                enum pid_type type;
                struct pid *pid;

                spin_lock_irqsave(&tty->ctrl_lock, flags);
                if (tty->pgrp) {
                        pid = tty->pgrp;
                        type = PIDTYPE_PGID;
                } else {
                        pid = task_pid(current);
                        type = PIDTYPE_PID;
                }
                get_pid(pid);
                spin_unlock_irqrestore(&tty->ctrl_lock, flags);
                __f_setown(filp, pid, type, 0);
                put_pid(pid);
                retval = 0;
        }
out:
        return retval;
}

static int tty_fasync(int fd, struct file *filp, int on)
{
        struct tty_struct *tty = file_tty(filp);
        int retval = -ENOTTY;

        tty_lock(tty);
        if (!tty_hung_up_p(filp))
                retval = __tty_fasync(fd, filp, on);
        tty_unlock(tty);

        return retval;
}

/**
 *      tiocsti                 -       fake input character
 *      @tty: tty to fake input into
 *      @p: pointer to character
 *
 *      Fake input to a tty device. Does the necessary locking and
 *      input management.
 *
 *      FIXME: does not honour flow control ??
 *
 *      Locking:
 *              Called functions take tty_ldiscs_lock
 *              current->signal->tty check is safe without locks
 *
 *      FIXME: may race normal receive processing
 */

static int tiocsti(struct tty_struct *tty, char __user *p)
{
        char ch, mbz = 0;
        struct tty_ldisc *ld;

        if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
                return -EPERM;
        if (get_user(ch, p))
                return -EFAULT;
        tty_audit_tiocsti(tty, ch);
        ld = tty_ldisc_ref_wait(tty);
        if (!ld)
                return -EIO;
        ld->ops->receive_buf(tty, &ch, &mbz, 1);
        tty_ldisc_deref(ld);
        return 0;
}

/**
 *      tiocgwinsz              -       implement window query ioctl
 *      @tty; tty
 *      @arg: user buffer for result
 *
 *      Copies the kernel idea of the window size into the user buffer.
 *
 *      Locking: tty->winsize_mutex is taken to ensure the winsize data
 *              is consistent.
 */

static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
{
        int err;

        mutex_lock(&tty->winsize_mutex);
        err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
        mutex_unlock(&tty->winsize_mutex);

        return err ? -EFAULT: 0;
}

/**
 *      tty_do_resize           -       resize event
 *      @tty: tty being resized
 *      @rows: rows (character)
 *      @cols: cols (character)
 *
 *      Update the termios variables and send the necessary signals to
 *      peform a terminal resize correctly
 */

int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
{
        struct pid *pgrp;

        /* Lock the tty */
        mutex_lock(&tty->winsize_mutex);
        if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
                goto done;

        /* Signal the foreground process group */
        pgrp = tty_get_pgrp(tty);
        if (pgrp)
                kill_pgrp(pgrp, SIGWINCH, 1);
        put_pid(pgrp);

        tty->winsize = *ws;
done:
        mutex_unlock(&tty->winsize_mutex);
        return 0;
}
EXPORT_SYMBOL(tty_do_resize);

/**
 *      tiocswinsz              -       implement window size set ioctl
 *      @tty; tty side of tty
 *      @arg: user buffer for result
 *
 *      Copies the user idea of the window size to the kernel. Traditionally
 *      this is just advisory information but for the Linux console it
 *      actually has driver level meaning and triggers a VC resize.
 *
 *      Locking:
 *              Driver dependent. The default do_resize method takes the
 *      tty termios mutex and ctrl_lock. The console takes its own lock
 *      then calls into the default method.
 */

static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
{
        struct winsize tmp_ws;
        if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
                return -EFAULT;

        if (tty->ops->resize)
                return tty->ops->resize(tty, &tmp_ws);
        else
                return tty_do_resize(tty, &tmp_ws);
}

/**
 *      tioccons        -       allow admin to move logical console
 *      @file: the file to become console
 *
 *      Allow the administrator to move the redirected console device
 *
 *      Locking: uses redirect_lock to guard the redirect information
 */

static int tioccons(struct file *file)
{
        if (!capable(CAP_SYS_ADMIN))
                return -EPERM;
        if (file->f_op->write == redirected_tty_write) {
                struct file *f;
                spin_lock(&redirect_lock);
                f = redirect;
                redirect = NULL;
                spin_unlock(&redirect_lock);
                if (f)
                        fput(f);
                return 0;
        }
        spin_lock(&redirect_lock);
        if (redirect) {
                spin_unlock(&redirect_lock);
                return -EBUSY;
        }
        redirect = get_file(file);
        spin_unlock(&redirect_lock);
        return 0;
}

/**
 *      fionbio         -       non blocking ioctl
 *      @file: file to set blocking value
 *      @p: user parameter
 *
 *      Historical tty interfaces had a blocking control ioctl before
 *      the generic functionality existed. This piece of history is preserved
 *      in the expected tty API of posix OS's.
 *
 *      Locking: none, the open file handle ensures it won't go away.
 */

static int fionbio(struct file *file, int __user *p)
{
        int nonblock;

        if (get_user(nonblock, p))
                return -EFAULT;

        spin_lock(&file->f_lock);
        if (nonblock)
                file->f_flags |= O_NONBLOCK;
        else
                file->f_flags &= ~O_NONBLOCK;
        spin_unlock(&file->f_lock);
        return 0;
}

/**
 *      tiocsetd        -       set line discipline
 *      @tty: tty device
 *      @p: pointer to user data
 *
 *      Set the line discipline according to user request.
 *
 *      Locking: see tty_set_ldisc, this function is just a helper
 */

static int tiocsetd(struct tty_struct *tty, int __user *p)
{
        int disc;
        int ret;

        if (get_user(disc, p))
                return -EFAULT;

        ret = tty_set_ldisc(tty, disc);

        return ret;
}

/**
 *      tiocgetd        -       get line discipline
 *      @tty: tty device
 *      @p: pointer to user data
 *
 *      Retrieves the line discipline id directly from the ldisc.
 *
 *      Locking: waits for ldisc reference (in case the line discipline
 *              is changing or the tty is being hungup)
 */

static int tiocgetd(struct tty_struct *tty, int __user *p)
{
        struct tty_ldisc *ld;
        int ret;

        ld = tty_ldisc_ref_wait(tty);
        if (!ld)
                return -EIO;
        ret = put_user(ld->ops->num, p);
        tty_ldisc_deref(ld);
        return ret;
}

/**
 *      send_break      -       performed time break
 *      @tty: device to break on
 *      @duration: timeout in mS
 *
 *      Perform a timed break on hardware that lacks its own driver level
 *      timed break functionality.
 *
 *      Locking:
 *              atomic_write_lock serializes
 *
 */

static int send_break(struct tty_struct *tty, unsigned int duration)
{
        int retval;

        if (tty->ops->break_ctl == NULL)
                return 0;

        if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK)
                retval = tty->ops->break_ctl(tty, duration);
        else {
                /* Do the work ourselves */
                if (tty_write_lock(tty, 0) < 0)
                        return -EINTR;
                retval = tty->ops->break_ctl(tty, -1);
                if (retval)
                        goto out;
                if (!signal_pending(current))
                        msleep_interruptible(duration);
                retval = tty->ops->break_ctl(tty, 0);
out:
                tty_write_unlock(tty);
                if (signal_pending(current))
                        retval = -EINTR;
        }
        return retval;
}

/**
 *      tty_tiocmget            -       get modem status
 *      @tty: tty device
 *      @file: user file pointer
 *      @p: pointer to result
 *
 *      Obtain the modem status bits from the tty driver if the feature
 *      is supported. Return -EINVAL if it is not available.
 *
 *      Locking: none (up to the driver)
 */

static int tty_tiocmget(struct tty_struct *tty, int __user *p)
{
        int retval = -EINVAL;

        if (tty->ops->tiocmget) {
                retval = tty->ops->tiocmget(tty);

                if (retval >= 0)
                        retval = put_user(retval, p);
        }
        return retval;
}

/**
 *      tty_tiocmset            -       set modem status
 *      @tty: tty device
 *      @cmd: command - clear bits, set bits or set all
 *      @p: pointer to desired bits
 *
 *      Set the modem status bits from the tty driver if the feature
 *      is supported. Return -EINVAL if it is not available.
 *
 *      Locking: none (up to the driver)
 */

static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
             unsigned __user *p)
{
        int retval;
        unsigned int set, clear, val;

        if (tty->ops->tiocmset == NULL)
                return -EINVAL;

        retval = get_user(val, p);
        if (retval)
                return retval;
        set = clear = 0;
        switch (cmd) {
        case TIOCMBIS:
                set = val;
                break;
        case TIOCMBIC:
                clear = val;
                break;
        case TIOCMSET:
                set = val;
                clear = ~val;
                break;
        }
        set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
        clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
        return tty->ops->tiocmset(tty, set, clear);
}

static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
{
        int retval = -EINVAL;
        struct serial_icounter_struct icount;
        memset(&icount, 0, sizeof(icount));
        if (tty->ops->get_icount)
                retval = tty->ops->get_icount(tty, &icount);
        if (retval != 0)
                return retval;
        if (copy_to_user(arg, &icount, sizeof(icount)))
                return -EFAULT;
        return 0;
}

static void tty_warn_deprecated_flags(struct serial_struct __user *ss)
{
        static DEFINE_RATELIMIT_STATE(depr_flags,
                        DEFAULT_RATELIMIT_INTERVAL,
                        DEFAULT_RATELIMIT_BURST);
        char comm[TASK_COMM_LEN];
        int flags;

        if (get_user(flags, &ss->flags))
                return;

        flags &= ASYNC_DEPRECATED;

        if (flags && __ratelimit(&depr_flags))
                pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
                        __func__, get_task_comm(comm, current), flags);
}

/*
 * if pty, return the slave side (real_tty)
 * otherwise, return self
 */
static struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
{
        if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
            tty->driver->subtype == PTY_TYPE_MASTER)
                tty = tty->link;
        return tty;
}

/*
 * Split this up, as gcc can choke on it otherwise..
 */
long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
        struct tty_struct *tty = file_tty(file);
        struct tty_struct *real_tty;
        void __user *p = (void __user *)arg;
        int retval;
        struct tty_ldisc *ld;

        if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
                return -EINVAL;

        real_tty = tty_pair_get_tty(tty);

        /*
         * Factor out some common prep work
         */
        switch (cmd) {
        case TIOCSETD:
        case TIOCSBRK:
        case TIOCCBRK:
        case TCSBRK:
        case TCSBRKP:
                retval = tty_check_change(tty);
                if (retval)
                        return retval;
                if (cmd != TIOCCBRK) {
                        tty_wait_until_sent(tty, 0);
                        if (signal_pending(current))
                                return -EINTR;
                }
                break;
        }

        /*
         *      Now do the stuff.
         */
        switch (cmd) {
        case TIOCSTI:
                return tiocsti(tty, p);
        case TIOCGWINSZ:
                return tiocgwinsz(real_tty, p);
        case TIOCSWINSZ:
                return tiocswinsz(real_tty, p);
        case TIOCCONS:
                return real_tty != tty ? -EINVAL : tioccons(file);
        case FIONBIO:
                return fionbio(file, p);
        case TIOCEXCL:
                set_bit(TTY_EXCLUSIVE, &tty->flags);
                return 0;
        case TIOCNXCL:
                clear_bit(TTY_EXCLUSIVE, &tty->flags);
                return 0;
        case TIOCGEXCL:
        {
                int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
                return put_user(excl, (int __user *)p);
        }
        case TIOCGETD:
                return tiocgetd(tty, p);
        case TIOCSETD:
                return tiocsetd(tty, p);
        case TIOCVHANGUP:
                if (!capable(CAP_SYS_ADMIN))
                        return -EPERM;
                tty_vhangup(tty);
                return 0;
        case TIOCGDEV:
        {
                unsigned int ret = new_encode_dev(tty_devnum(real_tty));
                return put_user(ret, (unsigned int __user *)p);
        }
        /*
         * Break handling
         */
        case TIOCSBRK:  /* Turn break on, unconditionally */
                if (tty->ops->break_ctl)
                        return tty->ops->break_ctl(tty, -1);
                return 0;
        case TIOCCBRK:  /* Turn break off, unconditionally */
                if (tty->ops->break_ctl)
                        return tty->ops->break_ctl(tty, 0);
                return 0;
        case TCSBRK:   /* SVID version: non-zero arg --> no break */
                /* non-zero arg means wait for all output data
                 * to be sent (performed above) but don't send break.
                 * This is used by the tcdrain() termios function.
                 */
                if (!arg)
                        return send_break(tty, 250);
                return 0;
        case TCSBRKP:   /* support for POSIX tcsendbreak() */
                return send_break(tty, arg ? arg*100 : 250);

        case TIOCMGET:
                return tty_tiocmget(tty, p);
        case TIOCMSET:
        case TIOCMBIC:
        case TIOCMBIS:
                return tty_tiocmset(tty, cmd, p);
        case TIOCGICOUNT:
                retval = tty_tiocgicount(tty, p);
                /* For the moment allow fall through to the old method */
                if (retval != -EINVAL)
                        return retval;
                break;
        case TCFLSH:
                switch (arg) {
                case TCIFLUSH:
                case TCIOFLUSH:
                /* flush tty buffer and allow ldisc to process ioctl */
                        tty_buffer_flush(tty, NULL);
                        break;
                }
                break;
        case TIOCSSERIAL:
                tty_warn_deprecated_flags(p);
                break;
        case TIOCGPTPEER:
                /* Special because the struct file is needed */
                return ptm_open_peer(file, tty, (int)arg);
        default:
                retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg);
                if (retval != -ENOIOCTLCMD)
                        return retval;
        }
        if (tty->ops->ioctl) {
                retval = tty->ops->ioctl(tty, cmd, arg);
                if (retval != -ENOIOCTLCMD)
                        return retval;
        }
        ld = tty_ldisc_ref_wait(tty);
        if (!ld)
                return hung_up_tty_ioctl(file, cmd, arg);
        retval = -EINVAL;
        if (ld->ops->ioctl) {
                retval = ld->ops->ioctl(tty, file, cmd, arg);
                if (retval == -ENOIOCTLCMD)
                        retval = -ENOTTY;
        }
        tty_ldisc_deref(ld);
        return retval;
}

#ifdef CONFIG_COMPAT
static long tty_compat_ioctl(struct file *file, unsigned int cmd,
                                unsigned long arg)
{
        struct tty_struct *tty = file_tty(file);
        struct tty_ldisc *ld;
        int retval = -ENOIOCTLCMD;

        if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
                return -EINVAL;

        if (tty->ops->compat_ioctl) {
                retval = tty->ops->compat_ioctl(tty, cmd, arg);
                if (retval != -ENOIOCTLCMD)
                        return retval;
        }

        ld = tty_ldisc_ref_wait(tty);
        if (!ld)
                return hung_up_tty_compat_ioctl(file, cmd, arg);
        if (ld->ops->compat_ioctl)
                retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
        else
                retval = n_tty_compat_ioctl_helper(tty, file, cmd, arg);
        tty_ldisc_deref(ld);

        return retval;
}
#endif

static int this_tty(const void *t, struct file *file, unsigned fd)
{
        if (likely(file->f_op->read != tty_read))
                return 0;
        return file_tty(file) != t ? 0 : fd + 1;
}
        
/*
 * This implements the "Secure Attention Key" ---  the idea is to
 * prevent trojan horses by killing all processes associated with this
 * tty when the user hits the "Secure Attention Key".  Required for
 * super-paranoid applications --- see the Orange Book for more details.
 *
 * This code could be nicer; ideally it should send a HUP, wait a few
 * seconds, then send a INT, and then a KILL signal.  But you then
 * have to coordinate with the init process, since all processes associated
 * with the current tty must be dead before the new getty is allowed
 * to spawn.
 *
 * Now, if it would be correct ;-/ The current code has a nasty hole -
 * it doesn't catch files in flight. We may send the descriptor to ourselves
 * via AF_UNIX socket, close it and later fetch from socket. FIXME.
 *
 * Nasty bug: do_SAK is being called in interrupt context.  This can
 * deadlock.  We punt it up to process context.  AKPM - 16Mar2001
 */
void __do_SAK(struct tty_struct *tty)
{
#ifdef TTY_SOFT_SAK
        tty_hangup(tty);
#else
        struct task_struct *g, *p;
        struct pid *session;
        int             i;

        if (!tty)
                return;
        session = tty->session;

        tty_ldisc_flush(tty);

        tty_driver_flush_buffer(tty);

        read_lock(&tasklist_lock);
        /* Kill the entire session */
        do_each_pid_task(session, PIDTYPE_SID, p) {
                tty_notice(tty, "SAK: killed process %d (%s): by session\n",
                           task_pid_nr(p), p->comm);
                send_sig(SIGKILL, p, 1);
        } while_each_pid_task(session, PIDTYPE_SID, p);

        /* Now kill any processes that happen to have the tty open */
        do_each_thread(g, p) {
                if (p->signal->tty == tty) {
                        tty_notice(tty, "SAK: killed process %d (%s): by controlling tty\n",
                                   task_pid_nr(p), p->comm);
                        send_sig(SIGKILL, p, 1);
                        continue;
                }
                task_lock(p);
                i = iterate_fd(p->files, 0, this_tty, tty);
                if (i != 0) {
                        tty_notice(tty, "SAK: killed process %d (%s): by fd#%d\n",
                                   task_pid_nr(p), p->comm, i - 1);
                        force_sig(SIGKILL, p);
                }
                task_unlock(p);
        } while_each_thread(g, p);
        read_unlock(&tasklist_lock);
#endif
}

static void do_SAK_work(struct work_struct *work)
{
        struct tty_struct *tty =
                container_of(work, struct tty_struct, SAK_work);
        __do_SAK(tty);
}

/*
 * The tq handling here is a little racy - tty->SAK_work may already be queued.
 * Fortunately we don't need to worry, because if ->SAK_work is already queued,
 * the values which we write to it will be identical to the values which it
 * already has. --akpm
 */
void do_SAK(struct tty_struct *tty)
{
        if (!tty)
                return;
        schedule_work(&tty->SAK_work);
}

EXPORT_SYMBOL(do_SAK);

static int dev_match_devt(struct device *dev, const void *data)
{
        const dev_t *devt = data;
        return dev->devt == *devt;
}

/* Must put_device() after it's unused! */
static struct device *tty_get_device(struct tty_struct *tty)
{
        dev_t devt = tty_devnum(tty);
        return class_find_device(tty_class, NULL, &devt, dev_match_devt);
}


/**
 *      alloc_tty_struct
 *
 *      This subroutine allocates and initializes a tty structure.
 *
 *      Locking: none - tty in question is not exposed at this point
 */

struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
{
        struct tty_struct *tty;

        tty = kzalloc(sizeof(*tty), GFP_KERNEL);
        if (!tty)
                return NULL;

        kref_init(&tty->kref);
        tty->magic = TTY_MAGIC;
        tty_ldisc_init(tty);
        tty->session = NULL;
        tty->pgrp = NULL;
        mutex_init(&tty->legacy_mutex);
        mutex_init(&tty->throttle_mutex);
        init_rwsem(&tty->termios_rwsem);
        mutex_init(&tty->winsize_mutex);
        init_ldsem(&tty->ldisc_sem);
        init_waitqueue_head(&tty->write_wait);
        init_waitqueue_head(&tty->read_wait);
        INIT_WORK(&tty->hangup_work, do_tty_hangup);
        mutex_init(&tty->atomic_write_lock);
        spin_lock_init(&tty->ctrl_lock);
        spin_lock_init(&tty->flow_lock);
        spin_lock_init(&tty->files_lock);
        INIT_LIST_HEAD(&tty->tty_files);
        INIT_WORK(&tty->SAK_work, do_SAK_work);

        tty->driver = driver;
        tty->ops = driver->ops;
        tty->index = idx;
        tty_line_name(driver, idx, tty->name);
        tty->dev = tty_get_device(tty);

        return tty;
}

/**
 *      tty_put_char    -       write one character to a tty
 *      @tty: tty
 *      @ch: character
 *
 *      Write one byte to the tty using the provided put_char method
 *      if present. Returns the number of characters successfully output.
 *
 *      Note: the specific put_char operation in the driver layer may go
 *      away soon. Don't call it directly, use this method
 */

int tty_put_char(struct tty_struct *tty, unsigned char ch)
{
        if (tty->ops->put_char)
                return tty->ops->put_char(tty, ch);
        return tty->ops->write(tty, &ch, 1);
}
EXPORT_SYMBOL_GPL(tty_put_char);

struct class *tty_class;

static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
                unsigned int index, unsigned int count)
{
        int err;

        /* init here, since reused cdevs cause crashes */
        driver->cdevs[index] = cdev_alloc();
        if (!driver->cdevs[index])
                return -ENOMEM;
        driver->cdevs[index]->ops = &tty_fops;
        driver->cdevs[index]->owner = driver->owner;
        err = cdev_add(driver->cdevs[index], dev, count);
        if (err)
                kobject_put(&driver->cdevs[index]->kobj);
        return err;
}

/**
 *      tty_register_device - register a tty device
 *      @driver: the tty driver that describes the tty device
 *      @index: the index in the tty driver for this tty device
 *      @device: a struct device that is associated with this tty device.
 *              This field is optional, if there is no known struct device
 *              for this tty device it can be set to NULL safely.
 *
 *      Returns a pointer to the struct device for this tty device
 *      (or ERR_PTR(-EFOO) on error).
 *
 *      This call is required to be made to register an individual tty device
 *      if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set.  If
 *      that bit is not set, this function should not be called by a tty
 *      driver.
 *
 *      Locking: ??
 */

struct device *tty_register_device(struct tty_driver *driver, unsigned index,
                                   struct device *device)
{
        return tty_register_device_attr(driver, index, device, NULL, NULL);
}
EXPORT_SYMBOL(tty_register_device);

static void tty_device_create_release(struct device *dev)
{
        dev_dbg(dev, "releasing...\n");
        kfree(dev);
}

/**
 *      tty_register_device_attr - register a tty device
 *      @driver: the tty driver that describes the tty device
 *      @index: the index in the tty driver for this tty device
 *      @device: a struct device that is associated with this tty device.
 *              This field is optional, if there is no known struct device
 *              for this tty device it can be set to NULL safely.
 *      @drvdata: Driver data to be set to device.
 *      @attr_grp: Attribute group to be set on device.
 *
 *      Returns a pointer to the struct device for this tty device
 *      (or ERR_PTR(-EFOO) on error).
 *
 *      This call is required to be made to register an individual tty device
 *      if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set.  If
 *      that bit is not set, this function should not be called by a tty
 *      driver.
 *
 *      Locking: ??
 */
struct device *tty_register_device_attr(struct tty_driver *driver,
                                   unsigned index, struct device *device,
                                   void *drvdata,
                                   const struct attribute_group **attr_grp)
{
        char name[64];
        dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
        struct ktermios *tp;
        struct device *dev;
        int retval;

        if (index >= driver->num) {
                pr_err("%s: Attempt to register invalid tty line number (%d)\n",
                       driver->name, index);
                return ERR_PTR(-EINVAL);
        }

        if (driver->type == TTY_DRIVER_TYPE_PTY)
                pty_line_name(driver, index, name);
        else
                tty_line_name(driver, index, name);

        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
        if (!dev)
                return ERR_PTR(-ENOMEM);

        dev->devt = devt;
        dev->class = tty_class;
        dev->parent = device;
        dev->release = tty_device_create_release;
        dev_set_name(dev, "%s", name);
        dev->groups = attr_grp;
        dev_set_drvdata(dev, drvdata);

        dev_set_uevent_suppress(dev, 1);

        retval = device_register(dev);
        if (retval)
                goto err_put;

        if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
                /*
                 * Free any saved termios data so that the termios state is
                 * reset when reusing a minor number.
                 */
                tp = driver->termios[index];
                if (tp) {
                        driver->termios[index] = NULL;
                        kfree(tp);
                }

                retval = tty_cdev_add(driver, devt, index, 1);
                if (retval)
                        goto err_del;
        }

        dev_set_uevent_suppress(dev, 0);
        kobject_uevent(&dev->kobj, KOBJ_ADD);

        return dev;

err_del:
        device_del(dev);
err_put:
        put_device(dev);

        return ERR_PTR(retval);
}
EXPORT_SYMBOL_GPL(tty_register_device_attr);

/**
 *      tty_unregister_device - unregister a tty device
 *      @driver: the tty driver that describes the tty device
 *      @index: the index in the tty driver for this tty device
 *
 *      If a tty device is registered with a call to tty_register_device() then
 *      this function must be called when the tty device is gone.
 *
 *      Locking: ??
 */

void tty_unregister_device(struct tty_driver *driver, unsigned index)

{
        device_destroy(tty_class,
                MKDEV(driver->major, driver->minor_start) + index);
        if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
                cdev_del(driver->cdevs[index]);
                driver->cdevs[index] = NULL;
        }
}
EXPORT_SYMBOL(tty_unregister_device);

/**
 * __tty_alloc_driver -- allocate tty driver
 * @lines: count of lines this driver can handle at most
 * @owner: module which is responsible for this driver
 * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
 *
 * This should not be called directly, some of the provided macros should be
 * used instead. Use IS_ERR and friends on @retval.
 */
struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
                unsigned long flags)
{
        struct tty_driver *driver;
        unsigned int cdevs = 1;
        int err;

        if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
                return ERR_PTR(-EINVAL);

        driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
        if (!driver)
                return ERR_PTR(-ENOMEM);

        kref_init(&driver->kref);
        driver->magic = TTY_DRIVER_MAGIC;
        driver->num = lines;
        driver->owner = owner;
        driver->flags = flags;

        if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
                driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
                                GFP_KERNEL);
                driver->termios = kcalloc(lines, sizeof(*driver->termios),
                                GFP_KERNEL);
                if (!driver->ttys || !driver->termios) {
                        err = -ENOMEM;
                        goto err_free_all;
                }
        }

        if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
                driver->ports = kcalloc(lines, sizeof(*driver->ports),
                                GFP_KERNEL);
                if (!driver->ports) {
                        err = -ENOMEM;
                        goto err_free_all;
                }
                cdevs = lines;
        }

        driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
        if (!driver->cdevs) {
                err = -ENOMEM;
                goto err_free_all;
        }

        return driver;
err_free_all:
        kfree(driver->ports);
        kfree(driver->ttys);
        kfree(driver->termios);
        kfree(driver->cdevs);
        kfree(driver);
        return ERR_PTR(err);
}
EXPORT_SYMBOL(__tty_alloc_driver);

static void destruct_tty_driver(struct kref *kref)
{
        struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
        int i;
        struct ktermios *tp;

        if (driver->flags & TTY_DRIVER_INSTALLED) {
                for (i = 0; i < driver->num; i++) {
                        tp = driver->termios[i];
                        if (tp) {
                                driver->termios[i] = NULL;
                                kfree(tp);
                        }
                        if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
                                tty_unregister_device(driver, i);
                }
                proc_tty_unregister_driver(driver);
                if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
                        cdev_del(driver->cdevs[0]);
        }
        kfree(driver->cdevs);
        kfree(driver->ports);
        kfree(driver->termios);
        kfree(driver->ttys);
        kfree(driver);
}

void tty_driver_kref_put(struct tty_driver *driver)
{
        kref_put(&driver->kref, destruct_tty_driver);
}
EXPORT_SYMBOL(tty_driver_kref_put);

void tty_set_operations(struct tty_driver *driver,
                        const struct tty_operations *op)
{
        driver->ops = op;
};
EXPORT_SYMBOL(tty_set_operations);

void put_tty_driver(struct tty_driver *d)
{
        tty_driver_kref_put(d);
}
EXPORT_SYMBOL(put_tty_driver);

/*
 * Called by a tty driver to register itself.
 */
int tty_register_driver(struct tty_driver *driver)
{
        int error;
        int i;
        dev_t dev;
        struct device *d;

        if (!driver->major) {
                error = alloc_chrdev_region(&dev, driver->minor_start,
                                                driver->num, driver->name);
                if (!error) {
                        driver->major = MAJOR(dev);
                        driver->minor_start = MINOR(dev);
                }
        } else {
                dev = MKDEV(driver->major, driver->minor_start);
                error = register_chrdev_region(dev, driver->num, driver->name);
        }
        if (error < 0)
                goto err;

        if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
                error = tty_cdev_add(driver, dev, 0, driver->num);
                if (error)
                        goto err_unreg_char;
        }

        mutex_lock(&tty_mutex);
        list_add(&driver->tty_drivers, &tty_drivers);
        mutex_unlock(&tty_mutex);

        if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
                for (i = 0; i < driver->num; i++) {
                        d = tty_register_device(driver, i, NULL);
                        if (IS_ERR(d)) {
                                error = PTR_ERR(d);
                                goto err_unreg_devs;
                        }
                }
        }
        proc_tty_register_driver(driver);
        driver->flags |= TTY_DRIVER_INSTALLED;
        return 0;

err_unreg_devs:
        for (i--; i >= 0; i--)
                tty_unregister_device(driver, i);

        mutex_lock(&tty_mutex);
        list_del(&driver->tty_drivers);
        mutex_unlock(&tty_mutex);

err_unreg_char:
        unregister_chrdev_region(dev, driver->num);
err:
        return error;
}
EXPORT_SYMBOL(tty_register_driver);

/*
 * Called by a tty driver to unregister itself.
 */
int tty_unregister_driver(struct tty_driver *driver)
{
#if 0
        /* FIXME */
        if (driver->refcount)
                return -EBUSY;
#endif
        unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
                                driver->num);
        mutex_lock(&tty_mutex);
        list_del(&driver->tty_drivers);
        mutex_unlock(&tty_mutex);
        return 0;
}

EXPORT_SYMBOL(tty_unregister_driver);

dev_t tty_devnum(struct tty_struct *tty)
{
        return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
}
EXPORT_SYMBOL(tty_devnum);

void tty_default_fops(struct file_operations *fops)
{
        *fops = tty_fops;
}

static char *tty_devnode(struct device *dev, umode_t *mode)
{
        if (!mode)
                return NULL;
        if (dev->devt == MKDEV(TTYAUX_MAJOR, 0) ||
            dev->devt == MKDEV(TTYAUX_MAJOR, 2))
                *mode = 0666;
        return NULL;
}

static int __init tty_class_init(void)
{
        tty_class = class_create(THIS_MODULE, "tty");
        if (IS_ERR(tty_class))
                return PTR_ERR(tty_class);
        tty_class->devnode = tty_devnode;
        return 0;
}

postcore_initcall(tty_class_init);

/* 3/2004 jmc: why do these devices exist? */
static struct cdev tty_cdev, console_cdev;

static ssize_t show_cons_active(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct console *cs[16];
        int i = 0;
        struct console *c;
        ssize_t count = 0;

        console_lock();
        for_each_console(c) {
                if (!c->device)
                        continue;
                if (!c->write)
                        continue;
                if ((c->flags & CON_ENABLED) == 0)
                        continue;
                cs[i++] = c;
                if (i >= ARRAY_SIZE(cs))
                        break;
        }
        while (i--) {
                int index = cs[i]->index;
                struct tty_driver *drv = cs[i]->device(cs[i], &index);

                /* don't resolve tty0 as some programs depend on it */
                if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR))
                        count += tty_line_name(drv, index, buf + count);
                else
                        count += sprintf(buf + count, "%s%d",
                                         cs[i]->name, cs[i]->index);

                count += sprintf(buf + count, "%c", i ? ' ':'\n');
        }
        console_unlock();

        return count;
}
static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);

static struct attribute *cons_dev_attrs[] = {
        &dev_attr_active.attr,
        NULL
};

ATTRIBUTE_GROUPS(cons_dev);

static struct device *consdev;

void console_sysfs_notify(void)
{
        if (consdev)
                sysfs_notify(&consdev->kobj, NULL, "active");
}

/*
 * Ok, now we can initialize the rest of the tty devices and can count
 * on memory allocations, interrupts etc..
 */
int __init tty_init(void)
{
        cdev_init(&tty_cdev, &tty_fops);
        if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
            register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
                panic("Couldn't register /dev/tty driver\n");
        device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");

        cdev_init(&console_cdev, &console_fops);
        if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
            register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
                panic("Couldn't register /dev/console driver\n");
        consdev = device_create_with_groups(tty_class, NULL,
                                            MKDEV(TTYAUX_MAJOR, 1), NULL,
                                            cons_dev_groups, "console");
        if (IS_ERR(consdev))
                consdev = NULL;

#ifdef CONFIG_VT
        vty_init(&console_fops);
#endif
        return 0;
}