linux/drivers/hwmon/w83781d.c
<<
>>
Prefs
   1/*
   2 * w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
   3 *             monitoring
   4 * Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
   5 *                            Philip Edelbrock <phil@netroedge.com>,
   6 *                            and Mark Studebaker <mdsxyz123@yahoo.com>
   7 * Copyright (c) 2007 - 2008  Jean Delvare <jdelvare@suse.de>
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License as published by
  11 * the Free Software Foundation; either version 2 of the License, or
  12 * (at your option) any later version.
  13 *
  14 * This program is distributed in the hope that it will be useful,
  15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 * GNU General Public License for more details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this program; if not, write to the Free Software
  21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 */
  23
  24/*
  25 * Supports following chips:
  26 *
  27 * Chip         #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  28 * as99127f     7       3       0       3       0x31    0x12c3  yes     no
  29 * as99127f rev.2 (type_name = as99127f)        0x31    0x5ca3  yes     no
  30 * w83781d      7       3       0       3       0x10-1  0x5ca3  yes     yes
  31 * w83782d      9       3       2-4     3       0x30    0x5ca3  yes     yes
  32 * w83783s      5-6     3       2       1-2     0x40    0x5ca3  yes     no
  33 *
  34 */
  35
  36#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  37
  38#include <linux/module.h>
  39#include <linux/init.h>
  40#include <linux/slab.h>
  41#include <linux/jiffies.h>
  42#include <linux/i2c.h>
  43#include <linux/hwmon.h>
  44#include <linux/hwmon-vid.h>
  45#include <linux/hwmon-sysfs.h>
  46#include <linux/sysfs.h>
  47#include <linux/err.h>
  48#include <linux/mutex.h>
  49
  50#ifdef CONFIG_ISA
  51#include <linux/platform_device.h>
  52#include <linux/ioport.h>
  53#include <linux/io.h>
  54#endif
  55
  56#include "lm75.h"
  57
  58/* Addresses to scan */
  59static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
  60                                                0x2e, 0x2f, I2C_CLIENT_END };
  61
  62enum chips { w83781d, w83782d, w83783s, as99127f };
  63
  64/* Insmod parameters */
  65static unsigned short force_subclients[4];
  66module_param_array(force_subclients, short, NULL, 0);
  67MODULE_PARM_DESC(force_subclients,
  68                 "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
  69
  70static bool reset;
  71module_param(reset, bool, 0);
  72MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
  73
  74static bool init = 1;
  75module_param(init, bool, 0);
  76MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
  77
  78/* Constants specified below */
  79
  80/* Length of ISA address segment */
  81#define W83781D_EXTENT                  8
  82
  83/* Where are the ISA address/data registers relative to the base address */
  84#define W83781D_ADDR_REG_OFFSET         5
  85#define W83781D_DATA_REG_OFFSET         6
  86
  87/* The device registers */
  88/* in nr from 0 to 8 */
  89#define W83781D_REG_IN_MAX(nr)          ((nr < 7) ? (0x2b + (nr) * 2) : \
  90                                                    (0x554 + (((nr) - 7) * 2)))
  91#define W83781D_REG_IN_MIN(nr)          ((nr < 7) ? (0x2c + (nr) * 2) : \
  92                                                    (0x555 + (((nr) - 7) * 2)))
  93#define W83781D_REG_IN(nr)              ((nr < 7) ? (0x20 + (nr)) : \
  94                                                    (0x550 + (nr) - 7))
  95
  96/* fan nr from 0 to 2 */
  97#define W83781D_REG_FAN_MIN(nr)         (0x3b + (nr))
  98#define W83781D_REG_FAN(nr)             (0x28 + (nr))
  99
 100#define W83781D_REG_BANK                0x4E
 101#define W83781D_REG_TEMP2_CONFIG        0x152
 102#define W83781D_REG_TEMP3_CONFIG        0x252
 103/* temp nr from 1 to 3 */
 104#define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
 105                                        ((nr == 2) ? (0x0150) : \
 106                                                     (0x27)))
 107#define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
 108                                        ((nr == 2) ? (0x153) : \
 109                                                     (0x3A)))
 110#define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
 111                                        ((nr == 2) ? (0x155) : \
 112                                                     (0x39)))
 113
 114#define W83781D_REG_CONFIG              0x40
 115
 116/* Interrupt status (W83781D, AS99127F) */
 117#define W83781D_REG_ALARM1              0x41
 118#define W83781D_REG_ALARM2              0x42
 119
 120/* Real-time status (W83782D, W83783S) */
 121#define W83782D_REG_ALARM1              0x459
 122#define W83782D_REG_ALARM2              0x45A
 123#define W83782D_REG_ALARM3              0x45B
 124
 125#define W83781D_REG_BEEP_CONFIG         0x4D
 126#define W83781D_REG_BEEP_INTS1          0x56
 127#define W83781D_REG_BEEP_INTS2          0x57
 128#define W83781D_REG_BEEP_INTS3          0x453   /* not on W83781D */
 129
 130#define W83781D_REG_VID_FANDIV          0x47
 131
 132#define W83781D_REG_CHIPID              0x49
 133#define W83781D_REG_WCHIPID             0x58
 134#define W83781D_REG_CHIPMAN             0x4F
 135#define W83781D_REG_PIN                 0x4B
 136
 137/* 782D/783S only */
 138#define W83781D_REG_VBAT                0x5D
 139
 140/* PWM 782D (1-4) and 783S (1-2) only */
 141static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
 142#define W83781D_REG_PWMCLK12            0x5C
 143#define W83781D_REG_PWMCLK34            0x45C
 144
 145#define W83781D_REG_I2C_ADDR            0x48
 146#define W83781D_REG_I2C_SUBADDR         0x4A
 147
 148/*
 149 * The following are undocumented in the data sheets however we
 150 * received the information in an email from Winbond tech support
 151 */
 152/* Sensor selection - not on 781d */
 153#define W83781D_REG_SCFG1               0x5D
 154static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
 155
 156#define W83781D_REG_SCFG2               0x59
 157static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
 158
 159#define W83781D_DEFAULT_BETA            3435
 160
 161/* Conversions */
 162#define IN_TO_REG(val)                  clamp_val(((val) + 8) / 16, 0, 255)
 163#define IN_FROM_REG(val)                ((val) * 16)
 164
 165static inline u8
 166FAN_TO_REG(long rpm, int div)
 167{
 168        if (rpm == 0)
 169                return 255;
 170        rpm = clamp_val(rpm, 1, 1000000);
 171        return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 172}
 173
 174static inline long
 175FAN_FROM_REG(u8 val, int div)
 176{
 177        if (val == 0)
 178                return -1;
 179        if (val == 255)
 180                return 0;
 181        return 1350000 / (val * div);
 182}
 183
 184#define TEMP_TO_REG(val)                clamp_val((val) / 1000, -127, 128)
 185#define TEMP_FROM_REG(val)              ((val) * 1000)
 186
 187#define BEEP_MASK_FROM_REG(val, type)   ((type) == as99127f ? \
 188                                         (~(val)) & 0x7fff : (val) & 0xff7fff)
 189#define BEEP_MASK_TO_REG(val, type)     ((type) == as99127f ? \
 190                                         (~(val)) & 0x7fff : (val) & 0xff7fff)
 191
 192#define DIV_FROM_REG(val)               (1 << (val))
 193
 194static inline u8
 195DIV_TO_REG(long val, enum chips type)
 196{
 197        int i;
 198        val = clamp_val(val, 1,
 199                        ((type == w83781d || type == as99127f) ? 8 : 128)) >> 1;
 200        for (i = 0; i < 7; i++) {
 201                if (val == 0)
 202                        break;
 203                val >>= 1;
 204        }
 205        return i;
 206}
 207
 208struct w83781d_data {
 209        struct i2c_client *client;
 210        struct device *hwmon_dev;
 211        struct mutex lock;
 212        enum chips type;
 213
 214        /* For ISA device only */
 215        const char *name;
 216        int isa_addr;
 217
 218        struct mutex update_lock;
 219        char valid;             /* !=0 if following fields are valid */
 220        unsigned long last_updated;     /* In jiffies */
 221
 222        struct i2c_client *lm75[2];     /* for secondary I2C addresses */
 223        /* array of 2 pointers to subclients */
 224
 225        u8 in[9];               /* Register value - 8 & 9 for 782D only */
 226        u8 in_max[9];           /* Register value - 8 & 9 for 782D only */
 227        u8 in_min[9];           /* Register value - 8 & 9 for 782D only */
 228        u8 fan[3];              /* Register value */
 229        u8 fan_min[3];          /* Register value */
 230        s8 temp;                /* Register value */
 231        s8 temp_max;            /* Register value */
 232        s8 temp_max_hyst;       /* Register value */
 233        u16 temp_add[2];        /* Register value */
 234        u16 temp_max_add[2];    /* Register value */
 235        u16 temp_max_hyst_add[2];       /* Register value */
 236        u8 fan_div[3];          /* Register encoding, shifted right */
 237        u8 vid;                 /* Register encoding, combined */
 238        u32 alarms;             /* Register encoding, combined */
 239        u32 beep_mask;          /* Register encoding, combined */
 240        u8 pwm[4];              /* Register value */
 241        u8 pwm2_enable;         /* Boolean */
 242        u16 sens[3];            /*
 243                                 * 782D/783S only.
 244                                 * 1 = pentium diode; 2 = 3904 diode;
 245                                 * 4 = thermistor
 246                                 */
 247        u8 vrm;
 248};
 249
 250static struct w83781d_data *w83781d_data_if_isa(void);
 251static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
 252
 253static int w83781d_read_value(struct w83781d_data *data, u16 reg);
 254static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
 255static struct w83781d_data *w83781d_update_device(struct device *dev);
 256static void w83781d_init_device(struct device *dev);
 257
 258/* following are the sysfs callback functions */
 259#define show_in_reg(reg) \
 260static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 261                char *buf) \
 262{ \
 263        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 264        struct w83781d_data *data = w83781d_update_device(dev); \
 265        return sprintf(buf, "%ld\n", \
 266                       (long)IN_FROM_REG(data->reg[attr->index])); \
 267}
 268show_in_reg(in);
 269show_in_reg(in_min);
 270show_in_reg(in_max);
 271
 272#define store_in_reg(REG, reg) \
 273static ssize_t store_in_##reg(struct device *dev, struct device_attribute \
 274                *da, const char *buf, size_t count) \
 275{ \
 276        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 277        struct w83781d_data *data = dev_get_drvdata(dev); \
 278        int nr = attr->index; \
 279        unsigned long val; \
 280        int err = kstrtoul(buf, 10, &val); \
 281        if (err) \
 282                return err; \
 283        mutex_lock(&data->update_lock); \
 284        data->in_##reg[nr] = IN_TO_REG(val); \
 285        w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \
 286                            data->in_##reg[nr]); \
 287        \
 288        mutex_unlock(&data->update_lock); \
 289        return count; \
 290}
 291store_in_reg(MIN, min);
 292store_in_reg(MAX, max);
 293
 294#define sysfs_in_offsets(offset) \
 295static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
 296                show_in, NULL, offset); \
 297static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
 298                show_in_min, store_in_min, offset); \
 299static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
 300                show_in_max, store_in_max, offset)
 301
 302sysfs_in_offsets(0);
 303sysfs_in_offsets(1);
 304sysfs_in_offsets(2);
 305sysfs_in_offsets(3);
 306sysfs_in_offsets(4);
 307sysfs_in_offsets(5);
 308sysfs_in_offsets(6);
 309sysfs_in_offsets(7);
 310sysfs_in_offsets(8);
 311
 312#define show_fan_reg(reg) \
 313static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 314                char *buf) \
 315{ \
 316        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 317        struct w83781d_data *data = w83781d_update_device(dev); \
 318        return sprintf(buf, "%ld\n", \
 319                FAN_FROM_REG(data->reg[attr->index], \
 320                        DIV_FROM_REG(data->fan_div[attr->index]))); \
 321}
 322show_fan_reg(fan);
 323show_fan_reg(fan_min);
 324
 325static ssize_t
 326store_fan_min(struct device *dev, struct device_attribute *da,
 327                const char *buf, size_t count)
 328{
 329        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 330        struct w83781d_data *data = dev_get_drvdata(dev);
 331        int nr = attr->index;
 332        unsigned long val;
 333        int err;
 334
 335        err = kstrtoul(buf, 10, &val);
 336        if (err)
 337                return err;
 338
 339        mutex_lock(&data->update_lock);
 340        data->fan_min[nr] =
 341            FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 342        w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
 343                            data->fan_min[nr]);
 344
 345        mutex_unlock(&data->update_lock);
 346        return count;
 347}
 348
 349static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 350static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 351                show_fan_min, store_fan_min, 0);
 352static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 353static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
 354                show_fan_min, store_fan_min, 1);
 355static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 356static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
 357                show_fan_min, store_fan_min, 2);
 358
 359#define show_temp_reg(reg) \
 360static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 361                char *buf) \
 362{ \
 363        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 364        struct w83781d_data *data = w83781d_update_device(dev); \
 365        int nr = attr->index; \
 366        if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 367                return sprintf(buf, "%d\n", \
 368                        LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
 369        } else {        /* TEMP1 */ \
 370                return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \
 371        } \
 372}
 373show_temp_reg(temp);
 374show_temp_reg(temp_max);
 375show_temp_reg(temp_max_hyst);
 376
 377#define store_temp_reg(REG, reg) \
 378static ssize_t store_temp_##reg(struct device *dev, \
 379                struct device_attribute *da, const char *buf, size_t count) \
 380{ \
 381        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 382        struct w83781d_data *data = dev_get_drvdata(dev); \
 383        int nr = attr->index; \
 384        long val; \
 385        int err = kstrtol(buf, 10, &val); \
 386        if (err) \
 387                return err; \
 388        mutex_lock(&data->update_lock); \
 389         \
 390        if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 391                data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
 392                w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 393                                data->temp_##reg##_add[nr-2]); \
 394        } else {        /* TEMP1 */ \
 395                data->temp_##reg = TEMP_TO_REG(val); \
 396                w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 397                        data->temp_##reg); \
 398        } \
 399         \
 400        mutex_unlock(&data->update_lock); \
 401        return count; \
 402}
 403store_temp_reg(OVER, max);
 404store_temp_reg(HYST, max_hyst);
 405
 406#define sysfs_temp_offsets(offset) \
 407static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
 408                show_temp, NULL, offset); \
 409static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
 410                show_temp_max, store_temp_max, offset); \
 411static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
 412                show_temp_max_hyst, store_temp_max_hyst, offset);
 413
 414sysfs_temp_offsets(1);
 415sysfs_temp_offsets(2);
 416sysfs_temp_offsets(3);
 417
 418static ssize_t
 419cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
 420{
 421        struct w83781d_data *data = w83781d_update_device(dev);
 422        return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
 423}
 424
 425static DEVICE_ATTR_RO(cpu0_vid);
 426
 427static ssize_t
 428vrm_show(struct device *dev, struct device_attribute *attr, char *buf)
 429{
 430        struct w83781d_data *data = dev_get_drvdata(dev);
 431        return sprintf(buf, "%ld\n", (long) data->vrm);
 432}
 433
 434static ssize_t
 435vrm_store(struct device *dev, struct device_attribute *attr, const char *buf,
 436          size_t count)
 437{
 438        struct w83781d_data *data = dev_get_drvdata(dev);
 439        unsigned long val;
 440        int err;
 441
 442        err = kstrtoul(buf, 10, &val);
 443        if (err)
 444                return err;
 445        data->vrm = clamp_val(val, 0, 255);
 446
 447        return count;
 448}
 449
 450static DEVICE_ATTR_RW(vrm);
 451
 452static ssize_t
 453alarms_show(struct device *dev, struct device_attribute *attr, char *buf)
 454{
 455        struct w83781d_data *data = w83781d_update_device(dev);
 456        return sprintf(buf, "%u\n", data->alarms);
 457}
 458
 459static DEVICE_ATTR_RO(alarms);
 460
 461static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 462                char *buf)
 463{
 464        struct w83781d_data *data = w83781d_update_device(dev);
 465        int bitnr = to_sensor_dev_attr(attr)->index;
 466        return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 467}
 468
 469/* The W83781D has a single alarm bit for temp2 and temp3 */
 470static ssize_t show_temp3_alarm(struct device *dev,
 471                struct device_attribute *attr, char *buf)
 472{
 473        struct w83781d_data *data = w83781d_update_device(dev);
 474        int bitnr = (data->type == w83781d) ? 5 : 13;
 475        return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 476}
 477
 478static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 479static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
 480static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
 481static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
 482static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
 483static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
 484static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
 485static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
 486static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
 487static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
 488static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
 489static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
 490static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
 491static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 492static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
 493
 494static ssize_t beep_mask_show(struct device *dev,
 495                               struct device_attribute *attr, char *buf)
 496{
 497        struct w83781d_data *data = w83781d_update_device(dev);
 498        return sprintf(buf, "%ld\n",
 499                       (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
 500}
 501
 502static ssize_t
 503beep_mask_store(struct device *dev, struct device_attribute *attr,
 504                const char *buf, size_t count)
 505{
 506        struct w83781d_data *data = dev_get_drvdata(dev);
 507        unsigned long val;
 508        int err;
 509
 510        err = kstrtoul(buf, 10, &val);
 511        if (err)
 512                return err;
 513
 514        mutex_lock(&data->update_lock);
 515        data->beep_mask &= 0x8000; /* preserve beep enable */
 516        data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
 517        w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
 518                            data->beep_mask & 0xff);
 519        w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
 520                            (data->beep_mask >> 8) & 0xff);
 521        if (data->type != w83781d && data->type != as99127f) {
 522                w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
 523                                    ((data->beep_mask) >> 16) & 0xff);
 524        }
 525        mutex_unlock(&data->update_lock);
 526
 527        return count;
 528}
 529
 530static DEVICE_ATTR_RW(beep_mask);
 531
 532static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
 533                char *buf)
 534{
 535        struct w83781d_data *data = w83781d_update_device(dev);
 536        int bitnr = to_sensor_dev_attr(attr)->index;
 537        return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 538}
 539
 540static ssize_t
 541store_beep(struct device *dev, struct device_attribute *attr,
 542                const char *buf, size_t count)
 543{
 544        struct w83781d_data *data = dev_get_drvdata(dev);
 545        int bitnr = to_sensor_dev_attr(attr)->index;
 546        u8 reg;
 547        unsigned long bit;
 548        int err;
 549
 550        err = kstrtoul(buf, 10, &bit);
 551        if (err)
 552                return err;
 553
 554        if (bit & ~1)
 555                return -EINVAL;
 556
 557        mutex_lock(&data->update_lock);
 558        if (bit)
 559                data->beep_mask |= (1 << bitnr);
 560        else
 561                data->beep_mask &= ~(1 << bitnr);
 562
 563        if (bitnr < 8) {
 564                reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
 565                if (bit)
 566                        reg |= (1 << bitnr);
 567                else
 568                        reg &= ~(1 << bitnr);
 569                w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
 570        } else if (bitnr < 16) {
 571                reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
 572                if (bit)
 573                        reg |= (1 << (bitnr - 8));
 574                else
 575                        reg &= ~(1 << (bitnr - 8));
 576                w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
 577        } else {
 578                reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
 579                if (bit)
 580                        reg |= (1 << (bitnr - 16));
 581                else
 582                        reg &= ~(1 << (bitnr - 16));
 583                w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
 584        }
 585        mutex_unlock(&data->update_lock);
 586
 587        return count;
 588}
 589
 590/* The W83781D has a single beep bit for temp2 and temp3 */
 591static ssize_t show_temp3_beep(struct device *dev,
 592                struct device_attribute *attr, char *buf)
 593{
 594        struct w83781d_data *data = w83781d_update_device(dev);
 595        int bitnr = (data->type == w83781d) ? 5 : 13;
 596        return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 597}
 598
 599static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
 600                        show_beep, store_beep, 0);
 601static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
 602                        show_beep, store_beep, 1);
 603static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
 604                        show_beep, store_beep, 2);
 605static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
 606                        show_beep, store_beep, 3);
 607static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
 608                        show_beep, store_beep, 8);
 609static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
 610                        show_beep, store_beep, 9);
 611static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
 612                        show_beep, store_beep, 10);
 613static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
 614                        show_beep, store_beep, 16);
 615static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
 616                        show_beep, store_beep, 17);
 617static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
 618                        show_beep, store_beep, 6);
 619static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
 620                        show_beep, store_beep, 7);
 621static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
 622                        show_beep, store_beep, 11);
 623static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
 624                        show_beep, store_beep, 4);
 625static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
 626                        show_beep, store_beep, 5);
 627static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
 628                        show_temp3_beep, store_beep, 13);
 629static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
 630                        show_beep, store_beep, 15);
 631
 632static ssize_t
 633show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
 634{
 635        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 636        struct w83781d_data *data = w83781d_update_device(dev);
 637        return sprintf(buf, "%ld\n",
 638                       (long) DIV_FROM_REG(data->fan_div[attr->index]));
 639}
 640
 641/*
 642 * Note: we save and restore the fan minimum here, because its value is
 643 * determined in part by the fan divisor.  This follows the principle of
 644 * least surprise; the user doesn't expect the fan minimum to change just
 645 * because the divisor changed.
 646 */
 647static ssize_t
 648store_fan_div(struct device *dev, struct device_attribute *da,
 649                const char *buf, size_t count)
 650{
 651        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 652        struct w83781d_data *data = dev_get_drvdata(dev);
 653        unsigned long min;
 654        int nr = attr->index;
 655        u8 reg;
 656        unsigned long val;
 657        int err;
 658
 659        err = kstrtoul(buf, 10, &val);
 660        if (err)
 661                return err;
 662
 663        mutex_lock(&data->update_lock);
 664
 665        /* Save fan_min */
 666        min = FAN_FROM_REG(data->fan_min[nr],
 667                           DIV_FROM_REG(data->fan_div[nr]));
 668
 669        data->fan_div[nr] = DIV_TO_REG(val, data->type);
 670
 671        reg = (w83781d_read_value(data, nr == 2 ?
 672                                  W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
 673                & (nr == 0 ? 0xcf : 0x3f))
 674              | ((data->fan_div[nr] & 0x03) << (nr == 0 ? 4 : 6));
 675        w83781d_write_value(data, nr == 2 ?
 676                            W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
 677
 678        /* w83781d and as99127f don't have extended divisor bits */
 679        if (data->type != w83781d && data->type != as99127f) {
 680                reg = (w83781d_read_value(data, W83781D_REG_VBAT)
 681                       & ~(1 << (5 + nr)))
 682                    | ((data->fan_div[nr] & 0x04) << (3 + nr));
 683                w83781d_write_value(data, W83781D_REG_VBAT, reg);
 684        }
 685
 686        /* Restore fan_min */
 687        data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 688        w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
 689
 690        mutex_unlock(&data->update_lock);
 691        return count;
 692}
 693
 694static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 695                show_fan_div, store_fan_div, 0);
 696static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 697                show_fan_div, store_fan_div, 1);
 698static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
 699                show_fan_div, store_fan_div, 2);
 700
 701static ssize_t
 702show_pwm(struct device *dev, struct device_attribute *da, char *buf)
 703{
 704        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 705        struct w83781d_data *data = w83781d_update_device(dev);
 706        return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
 707}
 708
 709static ssize_t
 710pwm2_enable_show(struct device *dev, struct device_attribute *da, char *buf)
 711{
 712        struct w83781d_data *data = w83781d_update_device(dev);
 713        return sprintf(buf, "%d\n", (int)data->pwm2_enable);
 714}
 715
 716static ssize_t
 717store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
 718                size_t count)
 719{
 720        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 721        struct w83781d_data *data = dev_get_drvdata(dev);
 722        int nr = attr->index;
 723        unsigned long val;
 724        int err;
 725
 726        err = kstrtoul(buf, 10, &val);
 727        if (err)
 728                return err;
 729
 730        mutex_lock(&data->update_lock);
 731        data->pwm[nr] = clamp_val(val, 0, 255);
 732        w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
 733        mutex_unlock(&data->update_lock);
 734        return count;
 735}
 736
 737static ssize_t
 738pwm2_enable_store(struct device *dev, struct device_attribute *da,
 739                const char *buf, size_t count)
 740{
 741        struct w83781d_data *data = dev_get_drvdata(dev);
 742        unsigned long val;
 743        u32 reg;
 744        int err;
 745
 746        err = kstrtoul(buf, 10, &val);
 747        if (err)
 748                return err;
 749
 750        mutex_lock(&data->update_lock);
 751
 752        switch (val) {
 753        case 0:
 754        case 1:
 755                reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
 756                w83781d_write_value(data, W83781D_REG_PWMCLK12,
 757                                    (reg & 0xf7) | (val << 3));
 758
 759                reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
 760                w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
 761                                    (reg & 0xef) | (!val << 4));
 762
 763                data->pwm2_enable = val;
 764                break;
 765
 766        default:
 767                mutex_unlock(&data->update_lock);
 768                return -EINVAL;
 769        }
 770
 771        mutex_unlock(&data->update_lock);
 772        return count;
 773}
 774
 775static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
 776static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
 777static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
 778static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
 779/* only PWM2 can be enabled/disabled */
 780static DEVICE_ATTR_RW(pwm2_enable);
 781
 782static ssize_t
 783show_sensor(struct device *dev, struct device_attribute *da, char *buf)
 784{
 785        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 786        struct w83781d_data *data = w83781d_update_device(dev);
 787        return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
 788}
 789
 790static ssize_t
 791store_sensor(struct device *dev, struct device_attribute *da,
 792                const char *buf, size_t count)
 793{
 794        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 795        struct w83781d_data *data = dev_get_drvdata(dev);
 796        int nr = attr->index;
 797        unsigned long val;
 798        u32 tmp;
 799        int err;
 800
 801        err = kstrtoul(buf, 10, &val);
 802        if (err)
 803                return err;
 804
 805        mutex_lock(&data->update_lock);
 806
 807        switch (val) {
 808        case 1:         /* PII/Celeron diode */
 809                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 810                w83781d_write_value(data, W83781D_REG_SCFG1,
 811                                    tmp | BIT_SCFG1[nr]);
 812                tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 813                w83781d_write_value(data, W83781D_REG_SCFG2,
 814                                    tmp | BIT_SCFG2[nr]);
 815                data->sens[nr] = val;
 816                break;
 817        case 2:         /* 3904 */
 818                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 819                w83781d_write_value(data, W83781D_REG_SCFG1,
 820                                    tmp | BIT_SCFG1[nr]);
 821                tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 822                w83781d_write_value(data, W83781D_REG_SCFG2,
 823                                    tmp & ~BIT_SCFG2[nr]);
 824                data->sens[nr] = val;
 825                break;
 826        case W83781D_DEFAULT_BETA:
 827                dev_warn(dev,
 828                         "Sensor type %d is deprecated, please use 4 instead\n",
 829                         W83781D_DEFAULT_BETA);
 830                /* fall through */
 831        case 4:         /* thermistor */
 832                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 833                w83781d_write_value(data, W83781D_REG_SCFG1,
 834                                    tmp & ~BIT_SCFG1[nr]);
 835                data->sens[nr] = val;
 836                break;
 837        default:
 838                dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
 839                       (long) val);
 840                break;
 841        }
 842
 843        mutex_unlock(&data->update_lock);
 844        return count;
 845}
 846
 847static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
 848        show_sensor, store_sensor, 0);
 849static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
 850        show_sensor, store_sensor, 1);
 851static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
 852        show_sensor, store_sensor, 2);
 853
 854/*
 855 * Assumes that adapter is of I2C, not ISA variety.
 856 * OTHERWISE DON'T CALL THIS
 857 */
 858static int
 859w83781d_detect_subclients(struct i2c_client *new_client)
 860{
 861        int i, val1 = 0, id;
 862        int err;
 863        int address = new_client->addr;
 864        unsigned short sc_addr[2];
 865        struct i2c_adapter *adapter = new_client->adapter;
 866        struct w83781d_data *data = i2c_get_clientdata(new_client);
 867        enum chips kind = data->type;
 868        int num_sc = 1;
 869
 870        id = i2c_adapter_id(adapter);
 871
 872        if (force_subclients[0] == id && force_subclients[1] == address) {
 873                for (i = 2; i <= 3; i++) {
 874                        if (force_subclients[i] < 0x48 ||
 875                            force_subclients[i] > 0x4f) {
 876                                dev_err(&new_client->dev,
 877                                        "Invalid subclient address %d; must be 0x48-0x4f\n",
 878                                        force_subclients[i]);
 879                                err = -EINVAL;
 880                                goto ERROR_SC_1;
 881                        }
 882                }
 883                w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
 884                                (force_subclients[2] & 0x07) |
 885                                ((force_subclients[3] & 0x07) << 4));
 886                sc_addr[0] = force_subclients[2];
 887        } else {
 888                val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
 889                sc_addr[0] = 0x48 + (val1 & 0x07);
 890        }
 891
 892        if (kind != w83783s) {
 893                num_sc = 2;
 894                if (force_subclients[0] == id &&
 895                    force_subclients[1] == address) {
 896                        sc_addr[1] = force_subclients[3];
 897                } else {
 898                        sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
 899                }
 900                if (sc_addr[0] == sc_addr[1]) {
 901                        dev_err(&new_client->dev,
 902                               "Duplicate addresses 0x%x for subclients.\n",
 903                               sc_addr[0]);
 904                        err = -EBUSY;
 905                        goto ERROR_SC_2;
 906                }
 907        }
 908
 909        for (i = 0; i < num_sc; i++) {
 910                data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
 911                if (!data->lm75[i]) {
 912                        dev_err(&new_client->dev,
 913                                "Subclient %d registration at address 0x%x failed.\n",
 914                                i, sc_addr[i]);
 915                        err = -ENOMEM;
 916                        if (i == 1)
 917                                goto ERROR_SC_3;
 918                        goto ERROR_SC_2;
 919                }
 920        }
 921
 922        return 0;
 923
 924/* Undo inits in case of errors */
 925ERROR_SC_3:
 926        i2c_unregister_device(data->lm75[0]);
 927ERROR_SC_2:
 928ERROR_SC_1:
 929        return err;
 930}
 931
 932#define IN_UNIT_ATTRS(X)                                        \
 933        &sensor_dev_attr_in##X##_input.dev_attr.attr,           \
 934        &sensor_dev_attr_in##X##_min.dev_attr.attr,             \
 935        &sensor_dev_attr_in##X##_max.dev_attr.attr,             \
 936        &sensor_dev_attr_in##X##_alarm.dev_attr.attr,           \
 937        &sensor_dev_attr_in##X##_beep.dev_attr.attr
 938
 939#define FAN_UNIT_ATTRS(X)                                       \
 940        &sensor_dev_attr_fan##X##_input.dev_attr.attr,          \
 941        &sensor_dev_attr_fan##X##_min.dev_attr.attr,            \
 942        &sensor_dev_attr_fan##X##_div.dev_attr.attr,            \
 943        &sensor_dev_attr_fan##X##_alarm.dev_attr.attr,          \
 944        &sensor_dev_attr_fan##X##_beep.dev_attr.attr
 945
 946#define TEMP_UNIT_ATTRS(X)                                      \
 947        &sensor_dev_attr_temp##X##_input.dev_attr.attr,         \
 948        &sensor_dev_attr_temp##X##_max.dev_attr.attr,           \
 949        &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr,      \
 950        &sensor_dev_attr_temp##X##_alarm.dev_attr.attr,         \
 951        &sensor_dev_attr_temp##X##_beep.dev_attr.attr
 952
 953static struct attribute *w83781d_attributes[] = {
 954        IN_UNIT_ATTRS(0),
 955        IN_UNIT_ATTRS(2),
 956        IN_UNIT_ATTRS(3),
 957        IN_UNIT_ATTRS(4),
 958        IN_UNIT_ATTRS(5),
 959        IN_UNIT_ATTRS(6),
 960        FAN_UNIT_ATTRS(1),
 961        FAN_UNIT_ATTRS(2),
 962        FAN_UNIT_ATTRS(3),
 963        TEMP_UNIT_ATTRS(1),
 964        TEMP_UNIT_ATTRS(2),
 965        &dev_attr_cpu0_vid.attr,
 966        &dev_attr_vrm.attr,
 967        &dev_attr_alarms.attr,
 968        &dev_attr_beep_mask.attr,
 969        &sensor_dev_attr_beep_enable.dev_attr.attr,
 970        NULL
 971};
 972static const struct attribute_group w83781d_group = {
 973        .attrs = w83781d_attributes,
 974};
 975
 976static struct attribute *w83781d_attributes_in1[] = {
 977        IN_UNIT_ATTRS(1),
 978        NULL
 979};
 980static const struct attribute_group w83781d_group_in1 = {
 981        .attrs = w83781d_attributes_in1,
 982};
 983
 984static struct attribute *w83781d_attributes_in78[] = {
 985        IN_UNIT_ATTRS(7),
 986        IN_UNIT_ATTRS(8),
 987        NULL
 988};
 989static const struct attribute_group w83781d_group_in78 = {
 990        .attrs = w83781d_attributes_in78,
 991};
 992
 993static struct attribute *w83781d_attributes_temp3[] = {
 994        TEMP_UNIT_ATTRS(3),
 995        NULL
 996};
 997static const struct attribute_group w83781d_group_temp3 = {
 998        .attrs = w83781d_attributes_temp3,
 999};
1000
1001static struct attribute *w83781d_attributes_pwm12[] = {
1002        &sensor_dev_attr_pwm1.dev_attr.attr,
1003        &sensor_dev_attr_pwm2.dev_attr.attr,
1004        &dev_attr_pwm2_enable.attr,
1005        NULL
1006};
1007static const struct attribute_group w83781d_group_pwm12 = {
1008        .attrs = w83781d_attributes_pwm12,
1009};
1010
1011static struct attribute *w83781d_attributes_pwm34[] = {
1012        &sensor_dev_attr_pwm3.dev_attr.attr,
1013        &sensor_dev_attr_pwm4.dev_attr.attr,
1014        NULL
1015};
1016static const struct attribute_group w83781d_group_pwm34 = {
1017        .attrs = w83781d_attributes_pwm34,
1018};
1019
1020static struct attribute *w83781d_attributes_other[] = {
1021        &sensor_dev_attr_temp1_type.dev_attr.attr,
1022        &sensor_dev_attr_temp2_type.dev_attr.attr,
1023        &sensor_dev_attr_temp3_type.dev_attr.attr,
1024        NULL
1025};
1026static const struct attribute_group w83781d_group_other = {
1027        .attrs = w83781d_attributes_other,
1028};
1029
1030/* No clean up is done on error, it's up to the caller */
1031static int
1032w83781d_create_files(struct device *dev, int kind, int is_isa)
1033{
1034        int err;
1035
1036        err = sysfs_create_group(&dev->kobj, &w83781d_group);
1037        if (err)
1038                return err;
1039
1040        if (kind != w83783s) {
1041                err = sysfs_create_group(&dev->kobj, &w83781d_group_in1);
1042                if (err)
1043                        return err;
1044        }
1045        if (kind != as99127f && kind != w83781d && kind != w83783s) {
1046                err = sysfs_create_group(&dev->kobj, &w83781d_group_in78);
1047                if (err)
1048                        return err;
1049        }
1050        if (kind != w83783s) {
1051                err = sysfs_create_group(&dev->kobj, &w83781d_group_temp3);
1052                if (err)
1053                        return err;
1054
1055                if (kind != w83781d) {
1056                        err = sysfs_chmod_file(&dev->kobj,
1057                                &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1058                                S_IRUGO | S_IWUSR);
1059                        if (err)
1060                                return err;
1061                }
1062        }
1063
1064        if (kind != w83781d && kind != as99127f) {
1065                err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm12);
1066                if (err)
1067                        return err;
1068        }
1069        if (kind == w83782d && !is_isa) {
1070                err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm34);
1071                if (err)
1072                        return err;
1073        }
1074
1075        if (kind != as99127f && kind != w83781d) {
1076                err = device_create_file(dev,
1077                                         &sensor_dev_attr_temp1_type.dev_attr);
1078                if (err)
1079                        return err;
1080                err = device_create_file(dev,
1081                                         &sensor_dev_attr_temp2_type.dev_attr);
1082                if (err)
1083                        return err;
1084                if (kind != w83783s) {
1085                        err = device_create_file(dev,
1086                                        &sensor_dev_attr_temp3_type.dev_attr);
1087                        if (err)
1088                                return err;
1089                }
1090        }
1091
1092        return 0;
1093}
1094
1095/* Return 0 if detection is successful, -ENODEV otherwise */
1096static int
1097w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
1098{
1099        int val1, val2;
1100        struct w83781d_data *isa = w83781d_data_if_isa();
1101        struct i2c_adapter *adapter = client->adapter;
1102        int address = client->addr;
1103        const char *client_name;
1104        enum vendor { winbond, asus } vendid;
1105
1106        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1107                return -ENODEV;
1108
1109        /*
1110         * We block updates of the ISA device to minimize the risk of
1111         * concurrent access to the same W83781D chip through different
1112         * interfaces.
1113         */
1114        if (isa)
1115                mutex_lock(&isa->update_lock);
1116
1117        if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
1118                dev_dbg(&adapter->dev,
1119                        "Detection of w83781d chip failed at step 3\n");
1120                goto err_nodev;
1121        }
1122
1123        val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
1124        val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1125        /* Check for Winbond or Asus ID if in bank 0 */
1126        if (!(val1 & 0x07) &&
1127            ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
1128             ((val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
1129                dev_dbg(&adapter->dev,
1130                        "Detection of w83781d chip failed at step 4\n");
1131                goto err_nodev;
1132        }
1133        /*
1134         * If Winbond SMBus, check address at 0x48.
1135         * Asus doesn't support, except for as99127f rev.2
1136         */
1137        if ((!(val1 & 0x80) && val2 == 0xa3) ||
1138            ((val1 & 0x80) && val2 == 0x5c)) {
1139                if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
1140                    != address) {
1141                        dev_dbg(&adapter->dev,
1142                                "Detection of w83781d chip failed at step 5\n");
1143                        goto err_nodev;
1144                }
1145        }
1146
1147        /* Put it now into bank 0 and Vendor ID High Byte */
1148        i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1149                (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
1150                 & 0x78) | 0x80);
1151
1152        /* Get the vendor ID */
1153        val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1154        if (val2 == 0x5c)
1155                vendid = winbond;
1156        else if (val2 == 0x12)
1157                vendid = asus;
1158        else {
1159                dev_dbg(&adapter->dev,
1160                        "w83781d chip vendor is neither Winbond nor Asus\n");
1161                goto err_nodev;
1162        }
1163
1164        /* Determine the chip type. */
1165        val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
1166        if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1167                client_name = "w83781d";
1168        else if (val1 == 0x30 && vendid == winbond)
1169                client_name = "w83782d";
1170        else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
1171                client_name = "w83783s";
1172        else if (val1 == 0x31)
1173                client_name = "as99127f";
1174        else
1175                goto err_nodev;
1176
1177        if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
1178                dev_dbg(&adapter->dev,
1179                        "Device at 0x%02x appears to be the same as ISA device\n",
1180                        address);
1181                goto err_nodev;
1182        }
1183
1184        if (isa)
1185                mutex_unlock(&isa->update_lock);
1186
1187        strlcpy(info->type, client_name, I2C_NAME_SIZE);
1188
1189        return 0;
1190
1191 err_nodev:
1192        if (isa)
1193                mutex_unlock(&isa->update_lock);
1194        return -ENODEV;
1195}
1196
1197static void w83781d_remove_files(struct device *dev)
1198{
1199        sysfs_remove_group(&dev->kobj, &w83781d_group);
1200        sysfs_remove_group(&dev->kobj, &w83781d_group_in1);
1201        sysfs_remove_group(&dev->kobj, &w83781d_group_in78);
1202        sysfs_remove_group(&dev->kobj, &w83781d_group_temp3);
1203        sysfs_remove_group(&dev->kobj, &w83781d_group_pwm12);
1204        sysfs_remove_group(&dev->kobj, &w83781d_group_pwm34);
1205        sysfs_remove_group(&dev->kobj, &w83781d_group_other);
1206}
1207
1208static int
1209w83781d_probe(struct i2c_client *client, const struct i2c_device_id *id)
1210{
1211        struct device *dev = &client->dev;
1212        struct w83781d_data *data;
1213        int err;
1214
1215        data = devm_kzalloc(dev, sizeof(struct w83781d_data), GFP_KERNEL);
1216        if (!data)
1217                return -ENOMEM;
1218
1219        i2c_set_clientdata(client, data);
1220        mutex_init(&data->lock);
1221        mutex_init(&data->update_lock);
1222
1223        data->type = id->driver_data;
1224        data->client = client;
1225
1226        /* attach secondary i2c lm75-like clients */
1227        err = w83781d_detect_subclients(client);
1228        if (err)
1229                return err;
1230
1231        /* Initialize the chip */
1232        w83781d_init_device(dev);
1233
1234        /* Register sysfs hooks */
1235        err = w83781d_create_files(dev, data->type, 0);
1236        if (err)
1237                goto exit_remove_files;
1238
1239        data->hwmon_dev = hwmon_device_register(dev);
1240        if (IS_ERR(data->hwmon_dev)) {
1241                err = PTR_ERR(data->hwmon_dev);
1242                goto exit_remove_files;
1243        }
1244
1245        return 0;
1246
1247 exit_remove_files:
1248        w83781d_remove_files(dev);
1249        i2c_unregister_device(data->lm75[0]);
1250        i2c_unregister_device(data->lm75[1]);
1251        return err;
1252}
1253
1254static int
1255w83781d_remove(struct i2c_client *client)
1256{
1257        struct w83781d_data *data = i2c_get_clientdata(client);
1258        struct device *dev = &client->dev;
1259
1260        hwmon_device_unregister(data->hwmon_dev);
1261        w83781d_remove_files(dev);
1262
1263        i2c_unregister_device(data->lm75[0]);
1264        i2c_unregister_device(data->lm75[1]);
1265
1266        return 0;
1267}
1268
1269static int
1270w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
1271{
1272        struct i2c_client *client = data->client;
1273        int res, bank;
1274        struct i2c_client *cl;
1275
1276        bank = (reg >> 8) & 0x0f;
1277        if (bank > 2)
1278                /* switch banks */
1279                i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1280                                          bank);
1281        if (bank == 0 || bank > 2) {
1282                res = i2c_smbus_read_byte_data(client, reg & 0xff);
1283        } else {
1284                /* switch to subclient */
1285                cl = data->lm75[bank - 1];
1286                /* convert from ISA to LM75 I2C addresses */
1287                switch (reg & 0xff) {
1288                case 0x50:      /* TEMP */
1289                        res = i2c_smbus_read_word_swapped(cl, 0);
1290                        break;
1291                case 0x52:      /* CONFIG */
1292                        res = i2c_smbus_read_byte_data(cl, 1);
1293                        break;
1294                case 0x53:      /* HYST */
1295                        res = i2c_smbus_read_word_swapped(cl, 2);
1296                        break;
1297                case 0x55:      /* OVER */
1298                default:
1299                        res = i2c_smbus_read_word_swapped(cl, 3);
1300                        break;
1301                }
1302        }
1303        if (bank > 2)
1304                i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1305
1306        return res;
1307}
1308
1309static int
1310w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
1311{
1312        struct i2c_client *client = data->client;
1313        int bank;
1314        struct i2c_client *cl;
1315
1316        bank = (reg >> 8) & 0x0f;
1317        if (bank > 2)
1318                /* switch banks */
1319                i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1320                                          bank);
1321        if (bank == 0 || bank > 2) {
1322                i2c_smbus_write_byte_data(client, reg & 0xff,
1323                                          value & 0xff);
1324        } else {
1325                /* switch to subclient */
1326                cl = data->lm75[bank - 1];
1327                /* convert from ISA to LM75 I2C addresses */
1328                switch (reg & 0xff) {
1329                case 0x52:      /* CONFIG */
1330                        i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1331                        break;
1332                case 0x53:      /* HYST */
1333                        i2c_smbus_write_word_swapped(cl, 2, value);
1334                        break;
1335                case 0x55:      /* OVER */
1336                        i2c_smbus_write_word_swapped(cl, 3, value);
1337                        break;
1338                }
1339        }
1340        if (bank > 2)
1341                i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1342
1343        return 0;
1344}
1345
1346static void
1347w83781d_init_device(struct device *dev)
1348{
1349        struct w83781d_data *data = dev_get_drvdata(dev);
1350        int i, p;
1351        int type = data->type;
1352        u8 tmp;
1353
1354        if (reset && type != as99127f) { /*
1355                                          * this resets registers we don't have
1356                                          * documentation for on the as99127f
1357                                          */
1358                /*
1359                 * Resetting the chip has been the default for a long time,
1360                 * but it causes the BIOS initializations (fan clock dividers,
1361                 * thermal sensor types...) to be lost, so it is now optional.
1362                 * It might even go away if nobody reports it as being useful,
1363                 * as I see very little reason why this would be needed at
1364                 * all.
1365                 */
1366                dev_info(dev,
1367                         "If reset=1 solved a problem you were having, please report!\n");
1368
1369                /* save these registers */
1370                i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1371                p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
1372                /*
1373                 * Reset all except Watchdog values and last conversion values
1374                 * This sets fan-divs to 2, among others
1375                 */
1376                w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
1377                /*
1378                 * Restore the registers and disable power-on abnormal beep.
1379                 * This saves FAN 1/2/3 input/output values set by BIOS.
1380                 */
1381                w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1382                w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
1383                /*
1384                 * Disable master beep-enable (reset turns it on).
1385                 * Individual beep_mask should be reset to off but for some
1386                 * reason disabling this bit helps some people not get beeped
1387                 */
1388                w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1389        }
1390
1391        /*
1392         * Disable power-on abnormal beep, as advised by the datasheet.
1393         * Already done if reset=1.
1394         */
1395        if (init && !reset && type != as99127f) {
1396                i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1397                w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1398        }
1399
1400        data->vrm = vid_which_vrm();
1401
1402        if ((type != w83781d) && (type != as99127f)) {
1403                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
1404                for (i = 1; i <= 3; i++) {
1405                        if (!(tmp & BIT_SCFG1[i - 1])) {
1406                                data->sens[i - 1] = 4;
1407                        } else {
1408                                if (w83781d_read_value
1409                                    (data,
1410                                     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1411                                        data->sens[i - 1] = 1;
1412                                else
1413                                        data->sens[i - 1] = 2;
1414                        }
1415                        if (type == w83783s && i == 2)
1416                                break;
1417                }
1418        }
1419
1420        if (init && type != as99127f) {
1421                /* Enable temp2 */
1422                tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
1423                if (tmp & 0x01) {
1424                        dev_warn(dev,
1425                                 "Enabling temp2, readings might not make sense\n");
1426                        w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
1427                                tmp & 0xfe);
1428                }
1429
1430                /* Enable temp3 */
1431                if (type != w83783s) {
1432                        tmp = w83781d_read_value(data,
1433                                W83781D_REG_TEMP3_CONFIG);
1434                        if (tmp & 0x01) {
1435                                dev_warn(dev,
1436                                         "Enabling temp3, readings might not make sense\n");
1437                                w83781d_write_value(data,
1438                                        W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1439                        }
1440                }
1441        }
1442
1443        /* Start monitoring */
1444        w83781d_write_value(data, W83781D_REG_CONFIG,
1445                            (w83781d_read_value(data,
1446                                                W83781D_REG_CONFIG) & 0xf7)
1447                            | 0x01);
1448
1449        /* A few vars need to be filled upon startup */
1450        for (i = 0; i < 3; i++) {
1451                data->fan_min[i] = w83781d_read_value(data,
1452                                        W83781D_REG_FAN_MIN(i));
1453        }
1454
1455        mutex_init(&data->update_lock);
1456}
1457
1458static struct w83781d_data *w83781d_update_device(struct device *dev)
1459{
1460        struct w83781d_data *data = dev_get_drvdata(dev);
1461        struct i2c_client *client = data->client;
1462        int i;
1463
1464        mutex_lock(&data->update_lock);
1465
1466        if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1467            || !data->valid) {
1468                dev_dbg(dev, "Starting device update\n");
1469
1470                for (i = 0; i <= 8; i++) {
1471                        if (data->type == w83783s && i == 1)
1472                                continue;       /* 783S has no in1 */
1473                        data->in[i] =
1474                            w83781d_read_value(data, W83781D_REG_IN(i));
1475                        data->in_min[i] =
1476                            w83781d_read_value(data, W83781D_REG_IN_MIN(i));
1477                        data->in_max[i] =
1478                            w83781d_read_value(data, W83781D_REG_IN_MAX(i));
1479                        if ((data->type != w83782d) && (i == 6))
1480                                break;
1481                }
1482                for (i = 0; i < 3; i++) {
1483                        data->fan[i] =
1484                            w83781d_read_value(data, W83781D_REG_FAN(i));
1485                        data->fan_min[i] =
1486                            w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
1487                }
1488                if (data->type != w83781d && data->type != as99127f) {
1489                        for (i = 0; i < 4; i++) {
1490                                data->pwm[i] =
1491                                    w83781d_read_value(data,
1492                                                       W83781D_REG_PWM[i]);
1493                                /* Only W83782D on SMBus has PWM3 and PWM4 */
1494                                if ((data->type != w83782d || !client)
1495                                    && i == 1)
1496                                        break;
1497                        }
1498                        /* Only PWM2 can be disabled */
1499                        data->pwm2_enable = (w83781d_read_value(data,
1500                                             W83781D_REG_PWMCLK12) & 0x08) >> 3;
1501                }
1502
1503                data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
1504                data->temp_max =
1505                    w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
1506                data->temp_max_hyst =
1507                    w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
1508                data->temp_add[0] =
1509                    w83781d_read_value(data, W83781D_REG_TEMP(2));
1510                data->temp_max_add[0] =
1511                    w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
1512                data->temp_max_hyst_add[0] =
1513                    w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
1514                if (data->type != w83783s) {
1515                        data->temp_add[1] =
1516                            w83781d_read_value(data, W83781D_REG_TEMP(3));
1517                        data->temp_max_add[1] =
1518                            w83781d_read_value(data,
1519                                               W83781D_REG_TEMP_OVER(3));
1520                        data->temp_max_hyst_add[1] =
1521                            w83781d_read_value(data,
1522                                               W83781D_REG_TEMP_HYST(3));
1523                }
1524                i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
1525                data->vid = i & 0x0f;
1526                data->vid |= (w83781d_read_value(data,
1527                                        W83781D_REG_CHIPID) & 0x01) << 4;
1528                data->fan_div[0] = (i >> 4) & 0x03;
1529                data->fan_div[1] = (i >> 6) & 0x03;
1530                data->fan_div[2] = (w83781d_read_value(data,
1531                                        W83781D_REG_PIN) >> 6) & 0x03;
1532                if ((data->type != w83781d) && (data->type != as99127f)) {
1533                        i = w83781d_read_value(data, W83781D_REG_VBAT);
1534                        data->fan_div[0] |= (i >> 3) & 0x04;
1535                        data->fan_div[1] |= (i >> 4) & 0x04;
1536                        data->fan_div[2] |= (i >> 5) & 0x04;
1537                }
1538                if (data->type == w83782d) {
1539                        data->alarms = w83781d_read_value(data,
1540                                                W83782D_REG_ALARM1)
1541                                     | (w83781d_read_value(data,
1542                                                W83782D_REG_ALARM2) << 8)
1543                                     | (w83781d_read_value(data,
1544                                                W83782D_REG_ALARM3) << 16);
1545                } else if (data->type == w83783s) {
1546                        data->alarms = w83781d_read_value(data,
1547                                                W83782D_REG_ALARM1)
1548                                     | (w83781d_read_value(data,
1549                                                W83782D_REG_ALARM2) << 8);
1550                } else {
1551                        /*
1552                         * No real-time status registers, fall back to
1553                         * interrupt status registers
1554                         */
1555                        data->alarms = w83781d_read_value(data,
1556                                                W83781D_REG_ALARM1)
1557                                     | (w83781d_read_value(data,
1558                                                W83781D_REG_ALARM2) << 8);
1559                }
1560                i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
1561                data->beep_mask = (i << 8) +
1562                    w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
1563                if ((data->type != w83781d) && (data->type != as99127f)) {
1564                        data->beep_mask |=
1565                            w83781d_read_value(data,
1566                                               W83781D_REG_BEEP_INTS3) << 16;
1567                }
1568                data->last_updated = jiffies;
1569                data->valid = 1;
1570        }
1571
1572        mutex_unlock(&data->update_lock);
1573
1574        return data;
1575}
1576
1577static const struct i2c_device_id w83781d_ids[] = {
1578        { "w83781d", w83781d, },
1579        { "w83782d", w83782d, },
1580        { "w83783s", w83783s, },
1581        { "as99127f", as99127f },
1582        { /* LIST END */ }
1583};
1584MODULE_DEVICE_TABLE(i2c, w83781d_ids);
1585
1586static struct i2c_driver w83781d_driver = {
1587        .class          = I2C_CLASS_HWMON,
1588        .driver = {
1589                .name = "w83781d",
1590        },
1591        .probe          = w83781d_probe,
1592        .remove         = w83781d_remove,
1593        .id_table       = w83781d_ids,
1594        .detect         = w83781d_detect,
1595        .address_list   = normal_i2c,
1596};
1597
1598/*
1599 * ISA related code
1600 */
1601#ifdef CONFIG_ISA
1602
1603/* ISA device, if found */
1604static struct platform_device *pdev;
1605
1606static unsigned short isa_address = 0x290;
1607
1608/*
1609 * I2C devices get this name attribute automatically, but for ISA devices
1610 * we must create it by ourselves.
1611 */
1612static ssize_t
1613name_show(struct device *dev, struct device_attribute *devattr, char *buf)
1614{
1615        struct w83781d_data *data = dev_get_drvdata(dev);
1616        return sprintf(buf, "%s\n", data->name);
1617}
1618static DEVICE_ATTR_RO(name);
1619
1620static struct w83781d_data *w83781d_data_if_isa(void)
1621{
1622        return pdev ? platform_get_drvdata(pdev) : NULL;
1623}
1624
1625/* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
1626static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
1627{
1628        struct w83781d_data *isa;
1629        int i;
1630
1631        if (!pdev)      /* No ISA chip */
1632                return 0;
1633
1634        isa = platform_get_drvdata(pdev);
1635
1636        if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
1637                return 0;       /* Address doesn't match */
1638        if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
1639                return 0;       /* Chip type doesn't match */
1640
1641        /*
1642         * We compare all the limit registers, the config register and the
1643         * interrupt mask registers
1644         */
1645        for (i = 0x2b; i <= 0x3d; i++) {
1646                if (w83781d_read_value(isa, i) !=
1647                    i2c_smbus_read_byte_data(client, i))
1648                        return 0;
1649        }
1650        if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
1651            i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
1652                return 0;
1653        for (i = 0x43; i <= 0x46; i++) {
1654                if (w83781d_read_value(isa, i) !=
1655                    i2c_smbus_read_byte_data(client, i))
1656                        return 0;
1657        }
1658
1659        return 1;
1660}
1661
1662static int
1663w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
1664{
1665        int word_sized, res;
1666
1667        word_sized = (((reg & 0xff00) == 0x100)
1668                      || ((reg & 0xff00) == 0x200))
1669            && (((reg & 0x00ff) == 0x50)
1670                || ((reg & 0x00ff) == 0x53)
1671                || ((reg & 0x00ff) == 0x55));
1672        if (reg & 0xff00) {
1673                outb_p(W83781D_REG_BANK,
1674                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1675                outb_p(reg >> 8,
1676                       data->isa_addr + W83781D_DATA_REG_OFFSET);
1677        }
1678        outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1679        res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
1680        if (word_sized) {
1681                outb_p((reg & 0xff) + 1,
1682                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1683                res =
1684                    (res << 8) + inb_p(data->isa_addr +
1685                                       W83781D_DATA_REG_OFFSET);
1686        }
1687        if (reg & 0xff00) {
1688                outb_p(W83781D_REG_BANK,
1689                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1690                outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1691        }
1692        return res;
1693}
1694
1695static void
1696w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
1697{
1698        int word_sized;
1699
1700        word_sized = (((reg & 0xff00) == 0x100)
1701                      || ((reg & 0xff00) == 0x200))
1702            && (((reg & 0x00ff) == 0x53)
1703                || ((reg & 0x00ff) == 0x55));
1704        if (reg & 0xff00) {
1705                outb_p(W83781D_REG_BANK,
1706                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1707                outb_p(reg >> 8,
1708                       data->isa_addr + W83781D_DATA_REG_OFFSET);
1709        }
1710        outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1711        if (word_sized) {
1712                outb_p(value >> 8,
1713                       data->isa_addr + W83781D_DATA_REG_OFFSET);
1714                outb_p((reg & 0xff) + 1,
1715                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1716        }
1717        outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
1718        if (reg & 0xff00) {
1719                outb_p(W83781D_REG_BANK,
1720                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1721                outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1722        }
1723}
1724
1725/*
1726 * The SMBus locks itself, usually, but nothing may access the Winbond between
1727 * bank switches. ISA access must always be locked explicitly!
1728 * We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1729 * would slow down the W83781D access and should not be necessary.
1730 * There are some ugly typecasts here, but the good news is - they should
1731 * nowhere else be necessary!
1732 */
1733static int
1734w83781d_read_value(struct w83781d_data *data, u16 reg)
1735{
1736        struct i2c_client *client = data->client;
1737        int res;
1738
1739        mutex_lock(&data->lock);
1740        if (client)
1741                res = w83781d_read_value_i2c(data, reg);
1742        else
1743                res = w83781d_read_value_isa(data, reg);
1744        mutex_unlock(&data->lock);
1745        return res;
1746}
1747
1748static int
1749w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
1750{
1751        struct i2c_client *client = data->client;
1752
1753        mutex_lock(&data->lock);
1754        if (client)
1755                w83781d_write_value_i2c(data, reg, value);
1756        else
1757                w83781d_write_value_isa(data, reg, value);
1758        mutex_unlock(&data->lock);
1759        return 0;
1760}
1761
1762static int
1763w83781d_isa_probe(struct platform_device *pdev)
1764{
1765        int err, reg;
1766        struct w83781d_data *data;
1767        struct resource *res;
1768
1769        /* Reserve the ISA region */
1770        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1771        if (!devm_request_region(&pdev->dev,
1772                                 res->start + W83781D_ADDR_REG_OFFSET, 2,
1773                                 "w83781d"))
1774                return -EBUSY;
1775
1776        data = devm_kzalloc(&pdev->dev, sizeof(struct w83781d_data),
1777                            GFP_KERNEL);
1778        if (!data)
1779                return -ENOMEM;
1780
1781        mutex_init(&data->lock);
1782        data->isa_addr = res->start;
1783        platform_set_drvdata(pdev, data);
1784
1785        reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
1786        switch (reg) {
1787        case 0x30:
1788                data->type = w83782d;
1789                data->name = "w83782d";
1790                break;
1791        default:
1792                data->type = w83781d;
1793                data->name = "w83781d";
1794        }
1795
1796        /* Initialize the W83781D chip */
1797        w83781d_init_device(&pdev->dev);
1798
1799        /* Register sysfs hooks */
1800        err = w83781d_create_files(&pdev->dev, data->type, 1);
1801        if (err)
1802                goto exit_remove_files;
1803
1804        err = device_create_file(&pdev->dev, &dev_attr_name);
1805        if (err)
1806                goto exit_remove_files;
1807
1808        data->hwmon_dev = hwmon_device_register(&pdev->dev);
1809        if (IS_ERR(data->hwmon_dev)) {
1810                err = PTR_ERR(data->hwmon_dev);
1811                goto exit_remove_files;
1812        }
1813
1814        return 0;
1815
1816 exit_remove_files:
1817        w83781d_remove_files(&pdev->dev);
1818        device_remove_file(&pdev->dev, &dev_attr_name);
1819        return err;
1820}
1821
1822static int
1823w83781d_isa_remove(struct platform_device *pdev)
1824{
1825        struct w83781d_data *data = platform_get_drvdata(pdev);
1826
1827        hwmon_device_unregister(data->hwmon_dev);
1828        w83781d_remove_files(&pdev->dev);
1829        device_remove_file(&pdev->dev, &dev_attr_name);
1830
1831        return 0;
1832}
1833
1834static struct platform_driver w83781d_isa_driver = {
1835        .driver = {
1836                .name = "w83781d",
1837        },
1838        .probe = w83781d_isa_probe,
1839        .remove = w83781d_isa_remove,
1840};
1841
1842/* return 1 if a supported chip is found, 0 otherwise */
1843static int __init
1844w83781d_isa_found(unsigned short address)
1845{
1846        int val, save, found = 0;
1847        int port;
1848
1849        /*
1850         * Some boards declare base+0 to base+7 as a PNP device, some base+4
1851         * to base+7 and some base+5 to base+6. So we better request each port
1852         * individually for the probing phase.
1853         */
1854        for (port = address; port < address + W83781D_EXTENT; port++) {
1855                if (!request_region(port, 1, "w83781d")) {
1856                        pr_debug("Failed to request port 0x%x\n", port);
1857                        goto release;
1858                }
1859        }
1860
1861#define REALLY_SLOW_IO
1862        /*
1863         * We need the timeouts for at least some W83781D-like
1864         * chips. But only if we read 'undefined' registers.
1865         */
1866        val = inb_p(address + 1);
1867        if (inb_p(address + 2) != val
1868         || inb_p(address + 3) != val
1869         || inb_p(address + 7) != val) {
1870                pr_debug("Detection failed at step %d\n", 1);
1871                goto release;
1872        }
1873#undef REALLY_SLOW_IO
1874
1875        /*
1876         * We should be able to change the 7 LSB of the address port. The
1877         * MSB (busy flag) should be clear initially, set after the write.
1878         */
1879        save = inb_p(address + W83781D_ADDR_REG_OFFSET);
1880        if (save & 0x80) {
1881                pr_debug("Detection failed at step %d\n", 2);
1882                goto release;
1883        }
1884        val = ~save & 0x7f;
1885        outb_p(val, address + W83781D_ADDR_REG_OFFSET);
1886        if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
1887                outb_p(save, address + W83781D_ADDR_REG_OFFSET);
1888                pr_debug("Detection failed at step %d\n", 3);
1889                goto release;
1890        }
1891
1892        /* We found a device, now see if it could be a W83781D */
1893        outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
1894        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1895        if (val & 0x80) {
1896                pr_debug("Detection failed at step %d\n", 4);
1897                goto release;
1898        }
1899        outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1900        save = inb_p(address + W83781D_DATA_REG_OFFSET);
1901        outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
1902        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1903        if ((!(save & 0x80) && (val != 0xa3))
1904         || ((save & 0x80) && (val != 0x5c))) {
1905                pr_debug("Detection failed at step %d\n", 5);
1906                goto release;
1907        }
1908        outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
1909        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1910        if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
1911                pr_debug("Detection failed at step %d\n", 6);
1912                goto release;
1913        }
1914
1915        /* The busy flag should be clear again */
1916        if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
1917                pr_debug("Detection failed at step %d\n", 7);
1918                goto release;
1919        }
1920
1921        /* Determine the chip type */
1922        outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1923        save = inb_p(address + W83781D_DATA_REG_OFFSET);
1924        outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
1925        outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
1926        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1927        if ((val & 0xfe) == 0x10        /* W83781D */
1928         || val == 0x30)                /* W83782D */
1929                found = 1;
1930
1931        if (found)
1932                pr_info("Found a %s chip at %#x\n",
1933                        val == 0x30 ? "W83782D" : "W83781D", (int)address);
1934
1935 release:
1936        for (port--; port >= address; port--)
1937                release_region(port, 1);
1938        return found;
1939}
1940
1941static int __init
1942w83781d_isa_device_add(unsigned short address)
1943{
1944        struct resource res = {
1945                .start  = address,
1946                .end    = address + W83781D_EXTENT - 1,
1947                .name   = "w83781d",
1948                .flags  = IORESOURCE_IO,
1949        };
1950        int err;
1951
1952        pdev = platform_device_alloc("w83781d", address);
1953        if (!pdev) {
1954                err = -ENOMEM;
1955                pr_err("Device allocation failed\n");
1956                goto exit;
1957        }
1958
1959        err = platform_device_add_resources(pdev, &res, 1);
1960        if (err) {
1961                pr_err("Device resource addition failed (%d)\n", err);
1962                goto exit_device_put;
1963        }
1964
1965        err = platform_device_add(pdev);
1966        if (err) {
1967                pr_err("Device addition failed (%d)\n", err);
1968                goto exit_device_put;
1969        }
1970
1971        return 0;
1972
1973 exit_device_put:
1974        platform_device_put(pdev);
1975 exit:
1976        pdev = NULL;
1977        return err;
1978}
1979
1980static int __init
1981w83781d_isa_register(void)
1982{
1983        int res;
1984
1985        if (w83781d_isa_found(isa_address)) {
1986                res = platform_driver_register(&w83781d_isa_driver);
1987                if (res)
1988                        goto exit;
1989
1990                /* Sets global pdev as a side effect */
1991                res = w83781d_isa_device_add(isa_address);
1992                if (res)
1993                        goto exit_unreg_isa_driver;
1994        }
1995
1996        return 0;
1997
1998exit_unreg_isa_driver:
1999        platform_driver_unregister(&w83781d_isa_driver);
2000exit:
2001        return res;
2002}
2003
2004static void
2005w83781d_isa_unregister(void)
2006{
2007        if (pdev) {
2008                platform_device_unregister(pdev);
2009                platform_driver_unregister(&w83781d_isa_driver);
2010        }
2011}
2012#else /* !CONFIG_ISA */
2013
2014static struct w83781d_data *w83781d_data_if_isa(void)
2015{
2016        return NULL;
2017}
2018
2019static int
2020w83781d_alias_detect(struct i2c_client *client, u8 chipid)
2021{
2022        return 0;
2023}
2024
2025static int
2026w83781d_read_value(struct w83781d_data *data, u16 reg)
2027{
2028        int res;
2029
2030        mutex_lock(&data->lock);
2031        res = w83781d_read_value_i2c(data, reg);
2032        mutex_unlock(&data->lock);
2033
2034        return res;
2035}
2036
2037static int
2038w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
2039{
2040        mutex_lock(&data->lock);
2041        w83781d_write_value_i2c(data, reg, value);
2042        mutex_unlock(&data->lock);
2043
2044        return 0;
2045}
2046
2047static int __init
2048w83781d_isa_register(void)
2049{
2050        return 0;
2051}
2052
2053static void
2054w83781d_isa_unregister(void)
2055{
2056}
2057#endif /* CONFIG_ISA */
2058
2059static int __init
2060sensors_w83781d_init(void)
2061{
2062        int res;
2063
2064        /*
2065         * We register the ISA device first, so that we can skip the
2066         * registration of an I2C interface to the same device.
2067         */
2068        res = w83781d_isa_register();
2069        if (res)
2070                goto exit;
2071
2072        res = i2c_add_driver(&w83781d_driver);
2073        if (res)
2074                goto exit_unreg_isa;
2075
2076        return 0;
2077
2078 exit_unreg_isa:
2079        w83781d_isa_unregister();
2080 exit:
2081        return res;
2082}
2083
2084static void __exit
2085sensors_w83781d_exit(void)
2086{
2087        w83781d_isa_unregister();
2088        i2c_del_driver(&w83781d_driver);
2089}
2090
2091MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2092              "Philip Edelbrock <phil@netroedge.com>, "
2093              "and Mark Studebaker <mdsxyz123@yahoo.com>");
2094MODULE_DESCRIPTION("W83781D driver");
2095MODULE_LICENSE("GPL");
2096
2097module_init(sensors_w83781d_init);
2098module_exit(sensors_w83781d_exit);
2099