linux/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
<<
>>
Prefs
   1/*======================================================================
   2    fmvj18x_cs.c 2.8 2002/03/23
   3
   4    A fmvj18x (and its compatibles) PCMCIA client driver
   5
   6    Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
   7
   8    TDK LAK-CD021 and CONTEC C-NET(PC)C support added by 
   9    Nobuhiro Katayama, kata-n@po.iijnet.or.jp
  10
  11    The PCMCIA client code is based on code written by David Hinds.
  12    Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
  13    but is actually largely Donald Becker's AT1700 driver, which
  14    carries the following attribution:
  15
  16    Written 1993-94 by Donald Becker.
  17
  18    Copyright 1993 United States Government as represented by the
  19    Director, National Security Agency.
  20    
  21    This software may be used and distributed according to the terms
  22    of the GNU General Public License, incorporated herein by reference.
  23    
  24    The author may be reached as becker@scyld.com, or C/O
  25    Scyld Computing Corporation
  26    410 Severn Ave., Suite 210
  27    Annapolis MD 21403
  28   
  29======================================================================*/
  30
  31#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  32
  33#define DRV_NAME        "fmvj18x_cs"
  34#define DRV_VERSION     "2.9"
  35
  36#include <linux/module.h>
  37#include <linux/kernel.h>
  38#include <linux/ptrace.h>
  39#include <linux/slab.h>
  40#include <linux/string.h>
  41#include <linux/timer.h>
  42#include <linux/interrupt.h>
  43#include <linux/in.h>
  44#include <linux/delay.h>
  45#include <linux/ethtool.h>
  46#include <linux/netdevice.h>
  47#include <linux/etherdevice.h>
  48#include <linux/skbuff.h>
  49#include <linux/if_arp.h>
  50#include <linux/ioport.h>
  51#include <linux/crc32.h>
  52
  53#include <pcmcia/cistpl.h>
  54#include <pcmcia/ciscode.h>
  55#include <pcmcia/ds.h>
  56
  57#include <linux/uaccess.h>
  58#include <asm/io.h>
  59
  60/*====================================================================*/
  61
  62/* Module parameters */
  63
  64MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
  65MODULE_LICENSE("GPL");
  66
  67#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  68
  69/* SRAM configuration */
  70/* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
  71INT_MODULE_PARM(sram_config, 0);
  72
  73
  74/*====================================================================*/
  75/*
  76    PCMCIA event handlers
  77 */
  78static int fmvj18x_config(struct pcmcia_device *link);
  79static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
  80static int fmvj18x_setup_mfc(struct pcmcia_device *link);
  81static void fmvj18x_release(struct pcmcia_device *link);
  82static void fmvj18x_detach(struct pcmcia_device *p_dev);
  83
  84/*
  85    LAN controller(MBH86960A) specific routines
  86 */
  87static int fjn_config(struct net_device *dev, struct ifmap *map);
  88static int fjn_open(struct net_device *dev);
  89static int fjn_close(struct net_device *dev);
  90static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
  91                                        struct net_device *dev);
  92static irqreturn_t fjn_interrupt(int irq, void *dev_id);
  93static void fjn_rx(struct net_device *dev);
  94static void fjn_reset(struct net_device *dev);
  95static void set_rx_mode(struct net_device *dev);
  96static void fjn_tx_timeout(struct net_device *dev);
  97static const struct ethtool_ops netdev_ethtool_ops;
  98
  99/*
 100    card type
 101 */
 102enum cardtype { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
 103               XXX10304, NEC, KME
 104};
 105
 106/*
 107    driver specific data structure
 108*/
 109struct local_info {
 110        struct pcmcia_device    *p_dev;
 111    long open_time;
 112    uint tx_started:1;
 113    uint tx_queue;
 114    u_short tx_queue_len;
 115    enum cardtype cardtype;
 116    u_short sent;
 117    u_char __iomem *base;
 118};
 119
 120#define MC_FILTERBREAK 64
 121
 122/*====================================================================*/
 123/* 
 124    ioport offset from the base address 
 125 */
 126#define TX_STATUS               0 /* transmit status register */
 127#define RX_STATUS               1 /* receive status register */
 128#define TX_INTR                 2 /* transmit interrupt mask register */
 129#define RX_INTR                 3 /* receive interrupt mask register */
 130#define TX_MODE                 4 /* transmit mode register */
 131#define RX_MODE                 5 /* receive mode register */
 132#define CONFIG_0                6 /* configuration register 0 */
 133#define CONFIG_1                7 /* configuration register 1 */
 134
 135#define NODE_ID                 8 /* node ID register            (bank 0) */
 136#define MAR_ADR                 8 /* multicast address registers (bank 1) */
 137
 138#define DATAPORT                8 /* buffer mem port registers   (bank 2) */
 139#define TX_START               10 /* transmit start register */
 140#define COL_CTRL               11 /* 16 collision control register */
 141#define BMPR12                 12 /* reserved */
 142#define BMPR13                 13 /* reserved */
 143#define RX_SKIP                14 /* skip received packet register */
 144
 145#define LAN_CTRL               16 /* LAN card control register */
 146
 147#define MAC_ID               0x1a /* hardware address */
 148#define UNGERMANN_MAC_ID     0x18 /* UNGERMANN-BASS hardware address */
 149
 150/* 
 151    control bits 
 152 */
 153#define ENA_TMT_OK           0x80
 154#define ENA_TMT_REC          0x20
 155#define ENA_COL              0x04
 156#define ENA_16_COL           0x02
 157#define ENA_TBUS_ERR         0x01
 158
 159#define ENA_PKT_RDY          0x80
 160#define ENA_BUS_ERR          0x40
 161#define ENA_LEN_ERR          0x08
 162#define ENA_ALG_ERR          0x04
 163#define ENA_CRC_ERR          0x02
 164#define ENA_OVR_FLO          0x01
 165
 166/* flags */
 167#define F_TMT_RDY            0x80 /* can accept new packet */
 168#define F_NET_BSY            0x40 /* carrier is detected */
 169#define F_TMT_OK             0x20 /* send packet successfully */
 170#define F_SRT_PKT            0x10 /* short packet error */
 171#define F_COL_ERR            0x04 /* collision error */
 172#define F_16_COL             0x02 /* 16 collision error */
 173#define F_TBUS_ERR           0x01 /* bus read error */
 174
 175#define F_PKT_RDY            0x80 /* packet(s) in buffer */
 176#define F_BUS_ERR            0x40 /* bus read error */
 177#define F_LEN_ERR            0x08 /* short packet */
 178#define F_ALG_ERR            0x04 /* frame error */
 179#define F_CRC_ERR            0x02 /* CRC error */
 180#define F_OVR_FLO            0x01 /* overflow error */
 181
 182#define F_BUF_EMP            0x40 /* receive buffer is empty */
 183
 184#define F_SKP_PKT            0x05 /* drop packet in buffer */
 185
 186/* default bitmaps */
 187#define D_TX_INTR  ( ENA_TMT_OK )
 188#define D_RX_INTR  ( ENA_PKT_RDY | ENA_LEN_ERR \
 189                   | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
 190#define TX_STAT_M  ( F_TMT_RDY )
 191#define RX_STAT_M  ( F_PKT_RDY | F_LEN_ERR \
 192                   | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
 193
 194/* commands */
 195#define D_TX_MODE            0x06 /* no tests, detect carrier */
 196#define ID_MATCHED           0x02 /* (RX_MODE) */
 197#define RECV_ALL             0x03 /* (RX_MODE) */
 198#define CONFIG0_DFL          0x5a /* 16bit bus, 4K x 2 Tx queues */
 199#define CONFIG0_DFL_1        0x5e /* 16bit bus, 8K x 2 Tx queues */
 200#define CONFIG0_RST          0xda /* Data Link Controller off (CONFIG_0) */
 201#define CONFIG0_RST_1        0xde /* Data Link Controller off (CONFIG_0) */
 202#define BANK_0               0xa0 /* bank 0 (CONFIG_1) */
 203#define BANK_1               0xa4 /* bank 1 (CONFIG_1) */
 204#define BANK_2               0xa8 /* bank 2 (CONFIG_1) */
 205#define CHIP_OFF             0x80 /* contrl chip power off (CONFIG_1) */
 206#define DO_TX                0x80 /* do transmit packet */
 207#define SEND_PKT             0x81 /* send a packet */
 208#define AUTO_MODE            0x07 /* Auto skip packet on 16 col detected */
 209#define MANU_MODE            0x03 /* Stop and skip packet on 16 col */
 210#define TDK_AUTO_MODE        0x47 /* Auto skip packet on 16 col detected */
 211#define TDK_MANU_MODE        0x43 /* Stop and skip packet on 16 col */
 212#define INTR_OFF             0x0d /* LAN controller ignores interrupts */
 213#define INTR_ON              0x1d /* LAN controller will catch interrupts */
 214
 215#define TX_TIMEOUT              ((400*HZ)/1000)
 216
 217#define BANK_0U              0x20 /* bank 0 (CONFIG_1) */
 218#define BANK_1U              0x24 /* bank 1 (CONFIG_1) */
 219#define BANK_2U              0x28 /* bank 2 (CONFIG_1) */
 220
 221static const struct net_device_ops fjn_netdev_ops = {
 222        .ndo_open               = fjn_open,
 223        .ndo_stop               = fjn_close,
 224        .ndo_start_xmit         = fjn_start_xmit,
 225        .ndo_tx_timeout         = fjn_tx_timeout,
 226        .ndo_set_config         = fjn_config,
 227        .ndo_set_rx_mode        = set_rx_mode,
 228        .ndo_set_mac_address    = eth_mac_addr,
 229        .ndo_validate_addr      = eth_validate_addr,
 230};
 231
 232static int fmvj18x_probe(struct pcmcia_device *link)
 233{
 234    struct local_info *lp;
 235    struct net_device *dev;
 236
 237    dev_dbg(&link->dev, "fmvj18x_attach()\n");
 238
 239    /* Make up a FMVJ18x specific data structure */
 240    dev = alloc_etherdev(sizeof(struct local_info));
 241    if (!dev)
 242        return -ENOMEM;
 243    lp = netdev_priv(dev);
 244    link->priv = dev;
 245    lp->p_dev = link;
 246    lp->base = NULL;
 247
 248    /* The io structure describes IO port mapping */
 249    link->resource[0]->end = 32;
 250    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 251
 252    /* General socket configuration */
 253    link->config_flags |= CONF_ENABLE_IRQ;
 254
 255    dev->netdev_ops = &fjn_netdev_ops;
 256    dev->watchdog_timeo = TX_TIMEOUT;
 257
 258    dev->ethtool_ops = &netdev_ethtool_ops;
 259
 260    return fmvj18x_config(link);
 261} /* fmvj18x_attach */
 262
 263/*====================================================================*/
 264
 265static void fmvj18x_detach(struct pcmcia_device *link)
 266{
 267    struct net_device *dev = link->priv;
 268
 269    dev_dbg(&link->dev, "fmvj18x_detach\n");
 270
 271    unregister_netdev(dev);
 272
 273    fmvj18x_release(link);
 274
 275    free_netdev(dev);
 276} /* fmvj18x_detach */
 277
 278/*====================================================================*/
 279
 280static int mfc_try_io_port(struct pcmcia_device *link)
 281{
 282    int i, ret;
 283    static const unsigned int serial_base[5] =
 284        { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 285
 286    for (i = 0; i < 5; i++) {
 287        link->resource[1]->start = serial_base[i];
 288        link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 289        if (link->resource[1]->start == 0) {
 290            link->resource[1]->end = 0;
 291            pr_notice("out of resource for serial\n");
 292        }
 293        ret = pcmcia_request_io(link);
 294        if (ret == 0)
 295                return ret;
 296    }
 297    return ret;
 298}
 299
 300static int ungermann_try_io_port(struct pcmcia_device *link)
 301{
 302    int ret;
 303    unsigned int ioaddr;
 304    /*
 305        Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
 306        0x380,0x3c0 only for ioport.
 307    */
 308    for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
 309        link->resource[0]->start = ioaddr;
 310        ret = pcmcia_request_io(link);
 311        if (ret == 0) {
 312            /* calculate ConfigIndex value */
 313            link->config_index =
 314                ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
 315            return ret;
 316        }
 317    }
 318    return ret; /* RequestIO failed */
 319}
 320
 321static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 322{
 323        return 0; /* strange, but that's what the code did already before... */
 324}
 325
 326static int fmvj18x_config(struct pcmcia_device *link)
 327{
 328    struct net_device *dev = link->priv;
 329    struct local_info *lp = netdev_priv(dev);
 330    int i, ret;
 331    unsigned int ioaddr;
 332    enum cardtype cardtype;
 333    char *card_name = "unknown";
 334    u8 *buf;
 335    size_t len;
 336    u_char buggybuf[32];
 337
 338    dev_dbg(&link->dev, "fmvj18x_config\n");
 339
 340    link->io_lines = 5;
 341
 342    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 343    kfree(buf);
 344
 345    if (len) {
 346        /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
 347        ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
 348        if (ret != 0)
 349                goto failed;
 350
 351        switch (link->manf_id) {
 352        case MANFID_TDK:
 353            cardtype = TDK;
 354            if (link->card_id == PRODID_TDK_GN3410 ||
 355                link->card_id == PRODID_TDK_NP9610 ||
 356                link->card_id == PRODID_TDK_MN3200) {
 357                /* MultiFunction Card */
 358                link->config_base = 0x800;
 359                link->config_index = 0x47;
 360                link->resource[1]->end = 8;
 361            }
 362            break;
 363        case MANFID_NEC:
 364            cardtype = NEC; /* MultiFunction Card */
 365            link->config_base = 0x800;
 366            link->config_index = 0x47;
 367            link->resource[1]->end = 8;
 368            break;
 369        case MANFID_KME:
 370            cardtype = KME; /* MultiFunction Card */
 371            link->config_base = 0x800;
 372            link->config_index = 0x47;
 373            link->resource[1]->end = 8;
 374            break;
 375        case MANFID_CONTEC:
 376            cardtype = CONTEC;
 377            break;
 378        case MANFID_FUJITSU:
 379            if (link->config_base == 0x0fe0)
 380                cardtype = MBH10302;
 381            else if (link->card_id == PRODID_FUJITSU_MBH10302) 
 382                /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
 383                   but these are MBH10304 based card. */ 
 384                cardtype = MBH10304;
 385            else if (link->card_id == PRODID_FUJITSU_MBH10304)
 386                cardtype = MBH10304;
 387            else
 388                cardtype = LA501;
 389            break;
 390        default:
 391            cardtype = MBH10304;
 392        }
 393    } else {
 394        /* old type card */
 395        switch (link->manf_id) {
 396        case MANFID_FUJITSU:
 397            if (link->card_id == PRODID_FUJITSU_MBH10304) {
 398                cardtype = XXX10304;    /* MBH10304 with buggy CIS */
 399                link->config_index = 0x20;
 400            } else {
 401                cardtype = MBH10302;    /* NextCom NC5310, etc. */
 402                link->config_index = 1;
 403            }
 404            break;
 405        case MANFID_UNGERMANN:
 406            cardtype = UNGERMANN;
 407            break;
 408        default:
 409            cardtype = MBH10302;
 410            link->config_index = 1;
 411        }
 412    }
 413
 414    if (link->resource[1]->end != 0) {
 415        ret = mfc_try_io_port(link);
 416        if (ret != 0) goto failed;
 417    } else if (cardtype == UNGERMANN) {
 418        ret = ungermann_try_io_port(link);
 419        if (ret != 0) goto failed;
 420    } else { 
 421            ret = pcmcia_request_io(link);
 422            if (ret)
 423                    goto failed;
 424    }
 425    ret = pcmcia_request_irq(link, fjn_interrupt);
 426    if (ret)
 427            goto failed;
 428    ret = pcmcia_enable_device(link);
 429    if (ret)
 430            goto failed;
 431
 432    dev->irq = link->irq;
 433    dev->base_addr = link->resource[0]->start;
 434
 435    if (resource_size(link->resource[1]) != 0) {
 436        ret = fmvj18x_setup_mfc(link);
 437        if (ret != 0) goto failed;
 438    }
 439
 440    ioaddr = dev->base_addr;
 441
 442    /* Reset controller */
 443    if (sram_config == 0) 
 444        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 445    else
 446        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 447
 448    /* Power On chip and select bank 0 */
 449    if (cardtype == MBH10302)
 450        outb(BANK_0, ioaddr + CONFIG_1);
 451    else
 452        outb(BANK_0U, ioaddr + CONFIG_1);
 453    
 454    /* Set hardware address */
 455    switch (cardtype) {
 456    case MBH10304:
 457    case TDK:
 458    case LA501:
 459    case CONTEC:
 460    case NEC:
 461    case KME:
 462        if (cardtype == MBH10304) {
 463            card_name = "FMV-J182";
 464
 465            len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 466            if (len < 11) {
 467                    kfree(buf);
 468                    goto failed;
 469            }
 470            /* Read MACID from CIS */
 471            for (i = 0; i < 6; i++)
 472                    dev->dev_addr[i] = buf[i + 5];
 473            kfree(buf);
 474        } else {
 475            if (pcmcia_get_mac_from_cis(link, dev))
 476                goto failed;
 477            if( cardtype == TDK ) {
 478                card_name = "TDK LAK-CD021";
 479            } else if( cardtype == LA501 ) {
 480                card_name = "LA501";
 481            } else if( cardtype == NEC ) {
 482                card_name = "PK-UG-J001";
 483            } else if( cardtype == KME ) {
 484                card_name = "Panasonic";
 485            } else {
 486                card_name = "C-NET(PC)C";
 487            }
 488        }
 489        break;
 490    case UNGERMANN:
 491        /* Read MACID from register */
 492        for (i = 0; i < 6; i++) 
 493            dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
 494        card_name = "Access/CARD";
 495        break;
 496    case XXX10304:
 497        /* Read MACID from Buggy CIS */
 498        if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
 499            pr_notice("unable to read hardware net address\n");
 500            goto failed;
 501        }
 502        for (i = 0 ; i < 6; i++) {
 503            dev->dev_addr[i] = buggybuf[i];
 504        }
 505        card_name = "FMV-J182";
 506        break;
 507    case MBH10302:
 508    default:
 509        /* Read MACID from register */
 510        for (i = 0; i < 6; i++) 
 511            dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
 512        card_name = "FMV-J181";
 513        break;
 514    }
 515
 516    lp->cardtype = cardtype;
 517    SET_NETDEV_DEV(dev, &link->dev);
 518
 519    if (register_netdev(dev) != 0) {
 520        pr_notice("register_netdev() failed\n");
 521        goto failed;
 522    }
 523
 524    /* print current configuration */
 525    netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
 526                card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
 527                dev->base_addr, dev->irq, dev->dev_addr);
 528
 529    return 0;
 530    
 531failed:
 532    fmvj18x_release(link);
 533    return -ENODEV;
 534} /* fmvj18x_config */
 535/*====================================================================*/
 536
 537static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 538{
 539    u_char __iomem *base;
 540    int i, j;
 541
 542    /* Allocate a small memory window */
 543    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 544    link->resource[2]->start = 0; link->resource[2]->end = 0;
 545    i = pcmcia_request_window(link, link->resource[2], 0);
 546    if (i != 0)
 547        return -1;
 548
 549    base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
 550    pcmcia_map_mem_page(link, link->resource[2], 0);
 551
 552    /*
 553     *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
 554     *  22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
 555     *  'xx' is garbage.
 556     *  'yy' is MAC address.
 557    */ 
 558    for (i = 0; i < 0x200; i++) {
 559        if (readb(base+i*2) == 0x22) {  
 560                if (readb(base+(i-1)*2) == 0xff &&
 561                    readb(base+(i+5)*2) == 0x04 &&
 562                    readb(base+(i+6)*2) == 0x06 &&
 563                    readb(base+(i+13)*2) == 0xff)
 564                        break;
 565        }
 566    }
 567
 568    if (i != 0x200) {
 569        for (j = 0 ; j < 6; j++,i++) {
 570            node_id[j] = readb(base+(i+7)*2);
 571        }
 572    }
 573
 574    iounmap(base);
 575    j = pcmcia_release_window(link, link->resource[2]);
 576    return (i != 0x200) ? 0 : -1;
 577
 578} /* fmvj18x_get_hwinfo */
 579/*====================================================================*/
 580
 581static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 582{
 583    int i;
 584    struct net_device *dev = link->priv;
 585    unsigned int ioaddr;
 586    struct local_info *lp = netdev_priv(dev);
 587
 588    /* Allocate a small memory window */
 589    link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 590    link->resource[3]->start = link->resource[3]->end = 0;
 591    i = pcmcia_request_window(link, link->resource[3], 0);
 592    if (i != 0)
 593        return -1;
 594
 595    lp->base = ioremap(link->resource[3]->start,
 596                       resource_size(link->resource[3]));
 597    if (lp->base == NULL) {
 598        netdev_notice(dev, "ioremap failed\n");
 599        return -1;
 600    }
 601
 602    i = pcmcia_map_mem_page(link, link->resource[3], 0);
 603    if (i != 0) {
 604        iounmap(lp->base);
 605        lp->base = NULL;
 606        return -1;
 607    }
 608    
 609    ioaddr = dev->base_addr;
 610    writeb(0x47, lp->base+0x800);       /* Config Option Register of LAN */
 611    writeb(0x0,  lp->base+0x802);       /* Config and Status Register */
 612
 613    writeb(ioaddr & 0xff, lp->base+0x80a);        /* I/O Base(Low) of LAN */
 614    writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
 615   
 616    writeb(0x45, lp->base+0x820);       /* Config Option Register of Modem */
 617    writeb(0x8,  lp->base+0x822);       /* Config and Status Register */
 618
 619    return 0;
 620
 621}
 622/*====================================================================*/
 623
 624static void fmvj18x_release(struct pcmcia_device *link)
 625{
 626
 627    struct net_device *dev = link->priv;
 628    struct local_info *lp = netdev_priv(dev);
 629    u_char __iomem *tmp;
 630
 631    dev_dbg(&link->dev, "fmvj18x_release\n");
 632
 633    if (lp->base != NULL) {
 634        tmp = lp->base;
 635        lp->base = NULL;    /* set NULL before iounmap */
 636        iounmap(tmp);
 637    }
 638
 639    pcmcia_disable_device(link);
 640
 641}
 642
 643static int fmvj18x_suspend(struct pcmcia_device *link)
 644{
 645        struct net_device *dev = link->priv;
 646
 647        if (link->open)
 648                netif_device_detach(dev);
 649
 650        return 0;
 651}
 652
 653static int fmvj18x_resume(struct pcmcia_device *link)
 654{
 655        struct net_device *dev = link->priv;
 656
 657        if (link->open) {
 658                fjn_reset(dev);
 659                netif_device_attach(dev);
 660        }
 661
 662        return 0;
 663}
 664
 665/*====================================================================*/
 666
 667static const struct pcmcia_device_id fmvj18x_ids[] = {
 668        PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
 669        PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
 670        PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
 671        PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
 672        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
 673        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
 674        PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
 675        PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
 676        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0       ", 0x8cef4d3a, 0x075fc7b6),
 677        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0        ", 0x8cef4d3a, 0xbccf43e6),
 678        PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
 679        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
 680        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
 681        PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
 682        PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304  ES", 0x2599f454),
 683        PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
 684        PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
 685        PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 686        PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 687        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
 688        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
 689        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
 690        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
 691        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
 692        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
 693        PCMCIA_DEVICE_NULL,
 694};
 695MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
 696
 697static struct pcmcia_driver fmvj18x_cs_driver = {
 698        .owner          = THIS_MODULE,
 699        .name           = "fmvj18x_cs",
 700        .probe          = fmvj18x_probe,
 701        .remove         = fmvj18x_detach,
 702        .id_table       = fmvj18x_ids,
 703        .suspend        = fmvj18x_suspend,
 704        .resume         = fmvj18x_resume,
 705};
 706module_pcmcia_driver(fmvj18x_cs_driver);
 707
 708/*====================================================================*/
 709
 710static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
 711{
 712    struct net_device *dev = dev_id;
 713    struct local_info *lp = netdev_priv(dev);
 714    unsigned int ioaddr;
 715    unsigned short tx_stat, rx_stat;
 716
 717    ioaddr = dev->base_addr;
 718
 719    /* avoid multiple interrupts */
 720    outw(0x0000, ioaddr + TX_INTR);
 721
 722    /* wait for a while */
 723    udelay(1);
 724
 725    /* get status */
 726    tx_stat = inb(ioaddr + TX_STATUS);
 727    rx_stat = inb(ioaddr + RX_STATUS);
 728
 729    /* clear status */
 730    outb(tx_stat, ioaddr + TX_STATUS);
 731    outb(rx_stat, ioaddr + RX_STATUS);
 732    
 733    pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
 734    pr_debug("               tx_status %02x.\n", tx_stat);
 735    
 736    if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 737        /* there is packet(s) in rx buffer */
 738        fjn_rx(dev);
 739    }
 740    if (tx_stat & F_TMT_RDY) {
 741        dev->stats.tx_packets += lp->sent ;
 742        lp->sent = 0 ;
 743        if (lp->tx_queue) {
 744            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 745            lp->sent = lp->tx_queue ;
 746            lp->tx_queue = 0;
 747            lp->tx_queue_len = 0;
 748            netif_trans_update(dev);
 749        } else {
 750            lp->tx_started = 0;
 751        }
 752        netif_wake_queue(dev);
 753    }
 754    pr_debug("%s: exiting interrupt,\n", dev->name);
 755    pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
 756
 757    outb(D_TX_INTR, ioaddr + TX_INTR);
 758    outb(D_RX_INTR, ioaddr + RX_INTR);
 759
 760    if (lp->base != NULL) {
 761        /* Ack interrupt for multifunction card */
 762        writeb(0x01, lp->base+0x802);
 763        writeb(0x09, lp->base+0x822);
 764    }
 765
 766    return IRQ_HANDLED;
 767
 768} /* fjn_interrupt */
 769
 770/*====================================================================*/
 771
 772static void fjn_tx_timeout(struct net_device *dev)
 773{
 774    struct local_info *lp = netdev_priv(dev);
 775    unsigned int ioaddr = dev->base_addr;
 776
 777    netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
 778                  htons(inw(ioaddr + TX_STATUS)),
 779                  inb(ioaddr + TX_STATUS) & F_TMT_RDY
 780                  ? "IRQ conflict" : "network cable problem");
 781    netdev_notice(dev, "timeout registers: %04x %04x %04x "
 782                  "%04x %04x %04x %04x %04x.\n",
 783                  htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
 784                  htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
 785                  htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
 786                  htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
 787    dev->stats.tx_errors++;
 788    /* ToDo: We should try to restart the adaptor... */
 789    local_irq_disable();
 790    fjn_reset(dev);
 791
 792    lp->tx_started = 0;
 793    lp->tx_queue = 0;
 794    lp->tx_queue_len = 0;
 795    lp->sent = 0;
 796    lp->open_time = jiffies;
 797    local_irq_enable();
 798    netif_wake_queue(dev);
 799}
 800
 801static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
 802                                        struct net_device *dev)
 803{
 804    struct local_info *lp = netdev_priv(dev);
 805    unsigned int ioaddr = dev->base_addr;
 806    short length = skb->len;
 807    
 808    if (length < ETH_ZLEN)
 809    {
 810        if (skb_padto(skb, ETH_ZLEN))
 811                return NETDEV_TX_OK;
 812        length = ETH_ZLEN;
 813    }
 814
 815    netif_stop_queue(dev);
 816
 817    {
 818        unsigned char *buf = skb->data;
 819
 820        if (length > ETH_FRAME_LEN) {
 821            netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
 822                          length);
 823            return NETDEV_TX_BUSY;
 824        }
 825
 826        netdev_dbg(dev, "Transmitting a packet of length %lu\n",
 827                   (unsigned long)skb->len);
 828        dev->stats.tx_bytes += skb->len;
 829
 830        /* Disable both interrupts. */
 831        outw(0x0000, ioaddr + TX_INTR);
 832
 833        /* wait for a while */
 834        udelay(1);
 835
 836        outw(length, ioaddr + DATAPORT);
 837        outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
 838
 839        lp->tx_queue++;
 840        lp->tx_queue_len += ((length+3) & ~1);
 841
 842        if (lp->tx_started == 0) {
 843            /* If the Tx is idle, always trigger a transmit. */
 844            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 845            lp->sent = lp->tx_queue ;
 846            lp->tx_queue = 0;
 847            lp->tx_queue_len = 0;
 848            lp->tx_started = 1;
 849            netif_start_queue(dev);
 850        } else {
 851            if( sram_config == 0 ) {
 852                if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
 853                    /* Yes, there is room for one more packet. */
 854                    netif_start_queue(dev);
 855            } else {
 856                if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && 
 857                                                lp->tx_queue < 127 )
 858                    /* Yes, there is room for one more packet. */
 859                    netif_start_queue(dev);
 860            }
 861        }
 862
 863        /* Re-enable interrupts */
 864        outb(D_TX_INTR, ioaddr + TX_INTR);
 865        outb(D_RX_INTR, ioaddr + RX_INTR);
 866    }
 867    dev_kfree_skb (skb);
 868
 869    return NETDEV_TX_OK;
 870} /* fjn_start_xmit */
 871
 872/*====================================================================*/
 873
 874static void fjn_reset(struct net_device *dev)
 875{
 876    struct local_info *lp = netdev_priv(dev);
 877    unsigned int ioaddr = dev->base_addr;
 878    int i;
 879
 880    netdev_dbg(dev, "fjn_reset() called\n");
 881
 882    /* Reset controller */
 883    if( sram_config == 0 ) 
 884        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 885    else
 886        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 887
 888    /* Power On chip and select bank 0 */
 889    if (lp->cardtype == MBH10302)
 890        outb(BANK_0, ioaddr + CONFIG_1);
 891    else
 892        outb(BANK_0U, ioaddr + CONFIG_1);
 893
 894    /* Set Tx modes */
 895    outb(D_TX_MODE, ioaddr + TX_MODE);
 896    /* set Rx modes */
 897    outb(ID_MATCHED, ioaddr + RX_MODE);
 898
 899    /* Set hardware address */
 900    for (i = 0; i < 6; i++) 
 901        outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
 902
 903    /* (re)initialize the multicast table */
 904    set_rx_mode(dev);
 905
 906    /* Switch to bank 2 (runtime mode) */
 907    if (lp->cardtype == MBH10302)
 908        outb(BANK_2, ioaddr + CONFIG_1);
 909    else
 910        outb(BANK_2U, ioaddr + CONFIG_1);
 911
 912    /* set 16col ctrl bits */
 913    if( lp->cardtype == TDK || lp->cardtype == CONTEC) 
 914        outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
 915    else
 916        outb(AUTO_MODE, ioaddr + COL_CTRL);
 917
 918    /* clear Reserved Regs */
 919    outb(0x00, ioaddr + BMPR12);
 920    outb(0x00, ioaddr + BMPR13);
 921
 922    /* reset Skip packet reg. */
 923    outb(0x01, ioaddr + RX_SKIP);
 924
 925    /* Enable Tx and Rx */
 926    if( sram_config == 0 )
 927        outb(CONFIG0_DFL, ioaddr + CONFIG_0);
 928    else
 929        outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
 930
 931    /* Init receive pointer ? */
 932    inw(ioaddr + DATAPORT);
 933    inw(ioaddr + DATAPORT);
 934
 935    /* Clear all status */
 936    outb(0xff, ioaddr + TX_STATUS);
 937    outb(0xff, ioaddr + RX_STATUS);
 938
 939    if (lp->cardtype == MBH10302)
 940        outb(INTR_OFF, ioaddr + LAN_CTRL);
 941
 942    /* Turn on Rx interrupts */
 943    outb(D_TX_INTR, ioaddr + TX_INTR);
 944    outb(D_RX_INTR, ioaddr + RX_INTR);
 945
 946    /* Turn on interrupts from LAN card controller */
 947    if (lp->cardtype == MBH10302)
 948        outb(INTR_ON, ioaddr + LAN_CTRL);
 949} /* fjn_reset */
 950
 951/*====================================================================*/
 952
 953static void fjn_rx(struct net_device *dev)
 954{
 955    unsigned int ioaddr = dev->base_addr;
 956    int boguscount = 10;        /* 5 -> 10: by agy 19940922 */
 957
 958    pr_debug("%s: in rx_packet(), rx_status %02x.\n",
 959          dev->name, inb(ioaddr + RX_STATUS));
 960
 961    while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 962        u_short status = inw(ioaddr + DATAPORT);
 963
 964        netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
 965                   inb(ioaddr + RX_MODE), status);
 966#ifndef final_version
 967        if (status == 0) {
 968            outb(F_SKP_PKT, ioaddr + RX_SKIP);
 969            break;
 970        }
 971#endif
 972        if ((status & 0xF0) != 0x20) {  /* There was an error. */
 973            dev->stats.rx_errors++;
 974            if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
 975            if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
 976            if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
 977            if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
 978        } else {
 979            u_short pkt_len = inw(ioaddr + DATAPORT);
 980            /* Malloc up new buffer. */
 981            struct sk_buff *skb;
 982
 983            if (pkt_len > 1550) {
 984                netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
 985                              pkt_len);
 986                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 987                dev->stats.rx_errors++;
 988                break;
 989            }
 990            skb = netdev_alloc_skb(dev, pkt_len + 2);
 991            if (skb == NULL) {
 992                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 993                dev->stats.rx_dropped++;
 994                break;
 995            }
 996
 997            skb_reserve(skb, 2);
 998            insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
 999                 (pkt_len + 1) >> 1);
1000            skb->protocol = eth_type_trans(skb, dev);
1001
1002            {
1003                int i;
1004                pr_debug("%s: Rxed packet of length %d: ",
1005                        dev->name, pkt_len);
1006                for (i = 0; i < 14; i++)
1007                        pr_debug(" %02x", skb->data[i]);
1008                pr_debug(".\n");
1009            }
1010
1011            netif_rx(skb);
1012            dev->stats.rx_packets++;
1013            dev->stats.rx_bytes += pkt_len;
1014        }
1015        if (--boguscount <= 0)
1016            break;
1017    }
1018
1019    /* If any worth-while packets have been received, dev_rint()
1020           has done a netif_wake_queue() for us and will work on them
1021           when we get to the bottom-half routine. */
1022/*
1023    if (lp->cardtype != TDK) {
1024        int i;
1025        for (i = 0; i < 20; i++) {
1026            if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
1027                break;
1028            (void)inw(ioaddr + DATAPORT);  /+ dummy status read +/
1029            outb(F_SKP_PKT, ioaddr + RX_SKIP);
1030        }
1031
1032        if (i > 0)
1033            pr_debug("%s: Exint Rx packet with mode %02x after "
1034                  "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
1035    }
1036*/
1037} /* fjn_rx */
1038
1039/*====================================================================*/
1040
1041static void netdev_get_drvinfo(struct net_device *dev,
1042                               struct ethtool_drvinfo *info)
1043{
1044        strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1045        strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1046        snprintf(info->bus_info, sizeof(info->bus_info),
1047                "PCMCIA 0x%lx", dev->base_addr);
1048}
1049
1050static const struct ethtool_ops netdev_ethtool_ops = {
1051        .get_drvinfo            = netdev_get_drvinfo,
1052};
1053
1054static int fjn_config(struct net_device *dev, struct ifmap *map){
1055    return 0;
1056}
1057
1058static int fjn_open(struct net_device *dev)
1059{
1060    struct local_info *lp = netdev_priv(dev);
1061    struct pcmcia_device *link = lp->p_dev;
1062
1063    pr_debug("fjn_open('%s').\n", dev->name);
1064
1065    if (!pcmcia_dev_present(link))
1066        return -ENODEV;
1067    
1068    link->open++;
1069    
1070    fjn_reset(dev);
1071    
1072    lp->tx_started = 0;
1073    lp->tx_queue = 0;
1074    lp->tx_queue_len = 0;
1075    lp->open_time = jiffies;
1076    netif_start_queue(dev);
1077    
1078    return 0;
1079} /* fjn_open */
1080
1081/*====================================================================*/
1082
1083static int fjn_close(struct net_device *dev)
1084{
1085    struct local_info *lp = netdev_priv(dev);
1086    struct pcmcia_device *link = lp->p_dev;
1087    unsigned int ioaddr = dev->base_addr;
1088
1089    pr_debug("fjn_close('%s').\n", dev->name);
1090
1091    lp->open_time = 0;
1092    netif_stop_queue(dev);
1093
1094    /* Set configuration register 0 to disable Tx and Rx. */
1095    if( sram_config == 0 ) 
1096        outb(CONFIG0_RST ,ioaddr + CONFIG_0);
1097    else
1098        outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
1099
1100    /* Update the statistics -- ToDo. */
1101
1102    /* Power-down the chip.  Green, green, green! */
1103    outb(CHIP_OFF ,ioaddr + CONFIG_1);
1104
1105    /* Set the ethernet adaptor disable IRQ */
1106    if (lp->cardtype == MBH10302)
1107        outb(INTR_OFF, ioaddr + LAN_CTRL);
1108
1109    link->open--;
1110
1111    return 0;
1112} /* fjn_close */
1113
1114/*====================================================================*/
1115
1116/*
1117  Set the multicast/promiscuous mode for this adaptor.
1118*/
1119
1120static void set_rx_mode(struct net_device *dev)
1121{
1122    unsigned int ioaddr = dev->base_addr;
1123    u_char mc_filter[8];                 /* Multicast hash filter */
1124    u_long flags;
1125    int i;
1126    
1127    int saved_bank;
1128    int saved_config_0 = inb(ioaddr + CONFIG_0);
1129     
1130    local_irq_save(flags); 
1131
1132    /* Disable Tx and Rx */
1133    if (sram_config == 0) 
1134        outb(CONFIG0_RST, ioaddr + CONFIG_0);
1135    else
1136        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
1137
1138    if (dev->flags & IFF_PROMISC) {
1139        memset(mc_filter, 0xff, sizeof(mc_filter));
1140        outb(3, ioaddr + RX_MODE);      /* Enable promiscuous mode */
1141    } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
1142               (dev->flags & IFF_ALLMULTI)) {
1143        /* Too many to filter perfectly -- accept all multicasts. */
1144        memset(mc_filter, 0xff, sizeof(mc_filter));
1145        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1146    } else if (netdev_mc_empty(dev)) {
1147        memset(mc_filter, 0x00, sizeof(mc_filter));
1148        outb(1, ioaddr + RX_MODE);      /* Ignore almost all multicasts. */
1149    } else {
1150        struct netdev_hw_addr *ha;
1151
1152        memset(mc_filter, 0, sizeof(mc_filter));
1153        netdev_for_each_mc_addr(ha, dev) {
1154            unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
1155            mc_filter[bit >> 3] |= (1 << (bit & 7));
1156        }
1157        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1158    }
1159
1160    /* Switch to bank 1 and set the multicast table. */
1161    saved_bank = inb(ioaddr + CONFIG_1);
1162    outb(0xe4, ioaddr + CONFIG_1);
1163
1164    for (i = 0; i < 8; i++)
1165        outb(mc_filter[i], ioaddr + MAR_ADR + i);
1166    outb(saved_bank, ioaddr + CONFIG_1);
1167
1168    outb(saved_config_0, ioaddr + CONFIG_0);
1169
1170    local_irq_restore(flags);
1171}
1172