linux/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
<<
>>
Prefs
   1/*
   2 * Marvell Wireless LAN device driver: functions for station ioctl
   3 *
   4 * Copyright (C) 2011-2014, Marvell International Ltd.
   5 *
   6 * This software file (the "File") is distributed by Marvell International
   7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
   8 * (the "License").  You may use, redistribute and/or modify this File in
   9 * accordance with the terms and conditions of the License, a copy of which
  10 * is available by writing to the Free Software Foundation, Inc.,
  11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
  12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
  13 *
  14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
  15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
  16 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
  17 * this warranty disclaimer.
  18 */
  19
  20#include "decl.h"
  21#include "ioctl.h"
  22#include "util.h"
  23#include "fw.h"
  24#include "main.h"
  25#include "wmm.h"
  26#include "11n.h"
  27#include "cfg80211.h"
  28
  29static int disconnect_on_suspend;
  30module_param(disconnect_on_suspend, int, 0644);
  31
  32/*
  33 * Copies the multicast address list from device to driver.
  34 *
  35 * This function does not validate the destination memory for
  36 * size, and the calling function must ensure enough memory is
  37 * available.
  38 */
  39int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
  40                            struct net_device *dev)
  41{
  42        int i = 0;
  43        struct netdev_hw_addr *ha;
  44
  45        netdev_for_each_mc_addr(ha, dev)
  46                memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN);
  47
  48        return i;
  49}
  50
  51/*
  52 * Wait queue completion handler.
  53 *
  54 * This function waits on a cmd wait queue. It also cancels the pending
  55 * request after waking up, in case of errors.
  56 */
  57int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
  58                                struct cmd_ctrl_node *cmd_queued)
  59{
  60        int status;
  61
  62        /* Wait for completion */
  63        status = wait_event_interruptible_timeout(adapter->cmd_wait_q.wait,
  64                                                  *(cmd_queued->condition),
  65                                                  (12 * HZ));
  66        if (status <= 0) {
  67                if (status == 0)
  68                        status = -ETIMEDOUT;
  69                mwifiex_dbg(adapter, ERROR, "cmd_wait_q terminated: %d\n",
  70                            status);
  71                mwifiex_cancel_all_pending_cmd(adapter);
  72                return status;
  73        }
  74
  75        status = adapter->cmd_wait_q.status;
  76        adapter->cmd_wait_q.status = 0;
  77
  78        return status;
  79}
  80
  81/*
  82 * This function prepares the correct firmware command and
  83 * issues it to set the multicast list.
  84 *
  85 * This function can be used to enable promiscuous mode, or enable all
  86 * multicast packets, or to enable selective multicast.
  87 */
  88int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
  89                                struct mwifiex_multicast_list *mcast_list)
  90{
  91        int ret = 0;
  92        u16 old_pkt_filter;
  93
  94        old_pkt_filter = priv->curr_pkt_filter;
  95
  96        if (mcast_list->mode == MWIFIEX_PROMISC_MODE) {
  97                mwifiex_dbg(priv->adapter, INFO,
  98                            "info: Enable Promiscuous mode\n");
  99                priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
 100                priv->curr_pkt_filter &=
 101                        ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
 102        } else {
 103                /* Multicast */
 104                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
 105                if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) {
 106                        mwifiex_dbg(priv->adapter, INFO,
 107                                    "info: Enabling All Multicast!\n");
 108                        priv->curr_pkt_filter |=
 109                                HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
 110                } else {
 111                        priv->curr_pkt_filter &=
 112                                ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
 113                        mwifiex_dbg(priv->adapter, INFO,
 114                                    "info: Set multicast list=%d\n",
 115                                    mcast_list->num_multicast_addr);
 116                        /* Send multicast addresses to firmware */
 117                        ret = mwifiex_send_cmd(priv,
 118                                               HostCmd_CMD_MAC_MULTICAST_ADR,
 119                                               HostCmd_ACT_GEN_SET, 0,
 120                                               mcast_list, false);
 121                }
 122        }
 123        mwifiex_dbg(priv->adapter, INFO,
 124                    "info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
 125                    old_pkt_filter, priv->curr_pkt_filter);
 126        if (old_pkt_filter != priv->curr_pkt_filter) {
 127                ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
 128                                       HostCmd_ACT_GEN_SET,
 129                                       0, &priv->curr_pkt_filter, false);
 130        }
 131
 132        return ret;
 133}
 134
 135/*
 136 * This function fills bss descriptor structure using provided
 137 * information.
 138 * beacon_ie buffer is allocated in this function. It is caller's
 139 * responsibility to free the memory.
 140 */
 141int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv,
 142                              struct cfg80211_bss *bss,
 143                              struct mwifiex_bssdescriptor *bss_desc)
 144{
 145        u8 *beacon_ie;
 146        size_t beacon_ie_len;
 147        struct mwifiex_bss_priv *bss_priv = (void *)bss->priv;
 148        const struct cfg80211_bss_ies *ies;
 149        int ret;
 150
 151        rcu_read_lock();
 152        ies = rcu_dereference(bss->ies);
 153        beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC);
 154        beacon_ie_len = ies->len;
 155        bss_desc->timestamp = ies->tsf;
 156        rcu_read_unlock();
 157
 158        if (!beacon_ie) {
 159                mwifiex_dbg(priv->adapter, ERROR,
 160                            " failed to alloc beacon_ie\n");
 161                return -ENOMEM;
 162        }
 163
 164        memcpy(bss_desc->mac_address, bss->bssid, ETH_ALEN);
 165        bss_desc->rssi = bss->signal;
 166        /* The caller of this function will free beacon_ie */
 167        bss_desc->beacon_buf = beacon_ie;
 168        bss_desc->beacon_buf_size = beacon_ie_len;
 169        bss_desc->beacon_period = bss->beacon_interval;
 170        bss_desc->cap_info_bitmap = bss->capability;
 171        bss_desc->bss_band = bss_priv->band;
 172        bss_desc->fw_tsf = bss_priv->fw_tsf;
 173        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) {
 174                mwifiex_dbg(priv->adapter, INFO,
 175                            "info: InterpretIE: AP WEP enabled\n");
 176                bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP;
 177        } else {
 178                bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL;
 179        }
 180        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_IBSS)
 181                bss_desc->bss_mode = NL80211_IFTYPE_ADHOC;
 182        else
 183                bss_desc->bss_mode = NL80211_IFTYPE_STATION;
 184
 185        /* Disable 11ac by default. Enable it only where there
 186         * exist VHT_CAP IE in AP beacon
 187         */
 188        bss_desc->disable_11ac = true;
 189
 190        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_SPECTRUM_MGMT)
 191                bss_desc->sensed_11h = true;
 192
 193        ret = mwifiex_update_bss_desc_with_ie(priv->adapter, bss_desc);
 194        if (ret)
 195                return ret;
 196
 197        /* Update HT40 capability based on current channel information */
 198        if (bss_desc->bcn_ht_oper && bss_desc->bcn_ht_cap) {
 199                u8 ht_param = bss_desc->bcn_ht_oper->ht_param;
 200                u8 radio = mwifiex_band_to_radio_type(bss_desc->bss_band);
 201                struct ieee80211_supported_band *sband =
 202                                                priv->wdev.wiphy->bands[radio];
 203                int freq = ieee80211_channel_to_frequency(bss_desc->channel,
 204                                                          radio);
 205                struct ieee80211_channel *chan =
 206                        ieee80211_get_channel(priv->adapter->wiphy, freq);
 207
 208                switch (ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
 209                case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
 210                        if (chan->flags & IEEE80211_CHAN_NO_HT40PLUS) {
 211                                sband->ht_cap.cap &=
 212                                        ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 213                                sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
 214                        } else {
 215                                sband->ht_cap.cap |=
 216                                        IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 217                                        IEEE80211_HT_CAP_SGI_40;
 218                        }
 219                        break;
 220                case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
 221                        if (chan->flags & IEEE80211_CHAN_NO_HT40MINUS) {
 222                                sband->ht_cap.cap &=
 223                                        ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 224                                sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
 225                        } else {
 226                                sband->ht_cap.cap |=
 227                                        IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 228                                        IEEE80211_HT_CAP_SGI_40;
 229                        }
 230                        break;
 231                }
 232        }
 233
 234        return 0;
 235}
 236
 237void mwifiex_dnld_txpwr_table(struct mwifiex_private *priv)
 238{
 239        if (priv->adapter->dt_node) {
 240                char txpwr[] = {"marvell,00_txpwrlimit"};
 241
 242                memcpy(&txpwr[8], priv->adapter->country_code, 2);
 243                mwifiex_dnld_dt_cfgdata(priv, priv->adapter->dt_node, txpwr);
 244        }
 245}
 246
 247static int mwifiex_process_country_ie(struct mwifiex_private *priv,
 248                                      struct cfg80211_bss *bss)
 249{
 250        const u8 *country_ie;
 251        u8 country_ie_len;
 252        struct mwifiex_802_11d_domain_reg *domain_info =
 253                                        &priv->adapter->domain_reg;
 254
 255        rcu_read_lock();
 256        country_ie = ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY);
 257        if (!country_ie) {
 258                rcu_read_unlock();
 259                return 0;
 260        }
 261
 262        country_ie_len = country_ie[1];
 263        if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) {
 264                rcu_read_unlock();
 265                return 0;
 266        }
 267
 268        if (!strncmp(priv->adapter->country_code, &country_ie[2], 2)) {
 269                rcu_read_unlock();
 270                mwifiex_dbg(priv->adapter, INFO,
 271                            "11D: skip setting domain info in FW\n");
 272                return 0;
 273        }
 274        memcpy(priv->adapter->country_code, &country_ie[2], 2);
 275
 276        domain_info->country_code[0] = country_ie[2];
 277        domain_info->country_code[1] = country_ie[3];
 278        domain_info->country_code[2] = ' ';
 279
 280        country_ie_len -= IEEE80211_COUNTRY_STRING_LEN;
 281
 282        domain_info->no_of_triplet =
 283                country_ie_len / sizeof(struct ieee80211_country_ie_triplet);
 284
 285        memcpy((u8 *)domain_info->triplet,
 286               &country_ie[2] + IEEE80211_COUNTRY_STRING_LEN, country_ie_len);
 287
 288        rcu_read_unlock();
 289
 290        if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
 291                             HostCmd_ACT_GEN_SET, 0, NULL, false)) {
 292                mwifiex_dbg(priv->adapter, ERROR,
 293                            "11D: setting domain info in FW fail\n");
 294                return -1;
 295        }
 296
 297        mwifiex_dnld_txpwr_table(priv);
 298
 299        return 0;
 300}
 301
 302/*
 303 * In Ad-Hoc mode, the IBSS is created if not found in scan list.
 304 * In both Ad-Hoc and infra mode, an deauthentication is performed
 305 * first.
 306 */
 307int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
 308                      struct cfg80211_ssid *req_ssid)
 309{
 310        int ret;
 311        struct mwifiex_adapter *adapter = priv->adapter;
 312        struct mwifiex_bssdescriptor *bss_desc = NULL;
 313
 314        priv->scan_block = false;
 315
 316        if (bss) {
 317                if (adapter->region_code == 0x00)
 318                        mwifiex_process_country_ie(priv, bss);
 319
 320                /* Allocate and fill new bss descriptor */
 321                bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor),
 322                                   GFP_KERNEL);
 323                if (!bss_desc)
 324                        return -ENOMEM;
 325
 326                ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
 327                if (ret)
 328                        goto done;
 329        }
 330
 331        if (priv->bss_mode == NL80211_IFTYPE_STATION ||
 332            priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
 333                u8 config_bands;
 334
 335                if (!bss_desc)
 336                        return -1;
 337
 338                if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
 339                                                HostCmd_SCAN_RADIO_TYPE_BG) {
 340                        config_bands = BAND_B | BAND_G | BAND_GN;
 341                } else {
 342                        config_bands = BAND_A | BAND_AN;
 343                        if (adapter->fw_bands & BAND_AAC)
 344                                config_bands |= BAND_AAC;
 345                }
 346
 347                if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands))
 348                        adapter->config_bands = config_bands;
 349
 350                ret = mwifiex_check_network_compatibility(priv, bss_desc);
 351                if (ret)
 352                        goto done;
 353
 354                if (mwifiex_11h_get_csa_closed_channel(priv) ==
 355                                                        (u8)bss_desc->channel) {
 356                        mwifiex_dbg(adapter, ERROR,
 357                                    "Attempt to reconnect on csa closed chan(%d)\n",
 358                                    bss_desc->channel);
 359                        ret = -1;
 360                        goto done;
 361                }
 362
 363                mwifiex_dbg(adapter, INFO,
 364                            "info: SSID found in scan list ...\t"
 365                            "associating...\n");
 366
 367                mwifiex_stop_net_dev_queue(priv->netdev, adapter);
 368                if (netif_carrier_ok(priv->netdev))
 369                        netif_carrier_off(priv->netdev);
 370
 371                /* Clear any past association response stored for
 372                 * application retrieval */
 373                priv->assoc_rsp_size = 0;
 374                ret = mwifiex_associate(priv, bss_desc);
 375
 376                /* If auth type is auto and association fails using open mode,
 377                 * try to connect using shared mode */
 378                if (ret == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
 379                    priv->sec_info.is_authtype_auto &&
 380                    priv->sec_info.wep_enabled) {
 381                        priv->sec_info.authentication_mode =
 382                                                NL80211_AUTHTYPE_SHARED_KEY;
 383                        ret = mwifiex_associate(priv, bss_desc);
 384                }
 385
 386                if (bss)
 387                        cfg80211_put_bss(priv->adapter->wiphy, bss);
 388        } else {
 389                /* Adhoc mode */
 390                /* If the requested SSID matches current SSID, return */
 391                if (bss_desc && bss_desc->ssid.ssid_len &&
 392                    (!mwifiex_ssid_cmp(&priv->curr_bss_params.bss_descriptor.
 393                                       ssid, &bss_desc->ssid))) {
 394                        ret = 0;
 395                        goto done;
 396                }
 397
 398                priv->adhoc_is_link_sensed = false;
 399
 400                ret = mwifiex_check_network_compatibility(priv, bss_desc);
 401
 402                mwifiex_stop_net_dev_queue(priv->netdev, adapter);
 403                if (netif_carrier_ok(priv->netdev))
 404                        netif_carrier_off(priv->netdev);
 405
 406                if (!ret) {
 407                        mwifiex_dbg(adapter, INFO,
 408                                    "info: network found in scan\t"
 409                                    " list. Joining...\n");
 410                        ret = mwifiex_adhoc_join(priv, bss_desc);
 411                        if (bss)
 412                                cfg80211_put_bss(priv->adapter->wiphy, bss);
 413                } else {
 414                        mwifiex_dbg(adapter, INFO,
 415                                    "info: Network not found in\t"
 416                                    "the list, creating adhoc with ssid = %s\n",
 417                                    req_ssid->ssid);
 418                        ret = mwifiex_adhoc_start(priv, req_ssid);
 419                }
 420        }
 421
 422done:
 423        /* beacon_ie buffer was allocated in function
 424         * mwifiex_fill_new_bss_desc(). Free it now.
 425         */
 426        if (bss_desc)
 427                kfree(bss_desc->beacon_buf);
 428        kfree(bss_desc);
 429
 430        if (ret < 0)
 431                priv->attempted_bss_desc = NULL;
 432
 433        return ret;
 434}
 435
 436/*
 437 * IOCTL request handler to set host sleep configuration.
 438 *
 439 * This function prepares the correct firmware command and
 440 * issues it.
 441 */
 442int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
 443                          int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)
 444
 445{
 446        struct mwifiex_adapter *adapter = priv->adapter;
 447        int status = 0;
 448        u32 prev_cond = 0;
 449
 450        if (!hs_cfg)
 451                return -ENOMEM;
 452
 453        switch (action) {
 454        case HostCmd_ACT_GEN_SET:
 455                if (adapter->pps_uapsd_mode) {
 456                        mwifiex_dbg(adapter, INFO,
 457                                    "info: Host Sleep IOCTL\t"
 458                                    "is blocked in UAPSD/PPS mode\n");
 459                        status = -1;
 460                        break;
 461                }
 462                if (hs_cfg->is_invoke_hostcmd) {
 463                        if (hs_cfg->conditions == HS_CFG_CANCEL) {
 464                                if (!adapter->is_hs_configured)
 465                                        /* Already cancelled */
 466                                        break;
 467                                /* Save previous condition */
 468                                prev_cond = le32_to_cpu(adapter->hs_cfg
 469                                                        .conditions);
 470                                adapter->hs_cfg.conditions =
 471                                                cpu_to_le32(hs_cfg->conditions);
 472                        } else if (hs_cfg->conditions) {
 473                                adapter->hs_cfg.conditions =
 474                                                cpu_to_le32(hs_cfg->conditions);
 475                                adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
 476                                if (hs_cfg->gap)
 477                                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
 478                        } else if (adapter->hs_cfg.conditions ==
 479                                   cpu_to_le32(HS_CFG_CANCEL)) {
 480                                /* Return failure if no parameters for HS
 481                                   enable */
 482                                status = -1;
 483                                break;
 484                        }
 485
 486                        status = mwifiex_send_cmd(priv,
 487                                                  HostCmd_CMD_802_11_HS_CFG_ENH,
 488                                                  HostCmd_ACT_GEN_SET, 0,
 489                                                  &adapter->hs_cfg,
 490                                                  cmd_type == MWIFIEX_SYNC_CMD);
 491
 492                        if (hs_cfg->conditions == HS_CFG_CANCEL)
 493                                /* Restore previous condition */
 494                                adapter->hs_cfg.conditions =
 495                                                cpu_to_le32(prev_cond);
 496                } else {
 497                        adapter->hs_cfg.conditions =
 498                                                cpu_to_le32(hs_cfg->conditions);
 499                        adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
 500                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
 501                }
 502                break;
 503        case HostCmd_ACT_GEN_GET:
 504                hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions);
 505                hs_cfg->gpio = adapter->hs_cfg.gpio;
 506                hs_cfg->gap = adapter->hs_cfg.gap;
 507                break;
 508        default:
 509                status = -1;
 510                break;
 511        }
 512
 513        return status;
 514}
 515
 516/*
 517 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 518 *
 519 * This function allocates the IOCTL request buffer, fills it
 520 * with requisite parameters and calls the IOCTL handler.
 521 */
 522int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type)
 523{
 524        struct mwifiex_ds_hs_cfg hscfg;
 525
 526        hscfg.conditions = HS_CFG_CANCEL;
 527        hscfg.is_invoke_hostcmd = true;
 528
 529        return mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
 530                                    cmd_type, &hscfg);
 531}
 532EXPORT_SYMBOL_GPL(mwifiex_cancel_hs);
 533
 534/*
 535 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 536 *
 537 * This function allocates the IOCTL request buffer, fills it
 538 * with requisite parameters and calls the IOCTL handler.
 539 */
 540int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
 541{
 542        struct mwifiex_ds_hs_cfg hscfg;
 543        struct mwifiex_private *priv;
 544        int i;
 545
 546        if (disconnect_on_suspend) {
 547                for (i = 0; i < adapter->priv_num; i++) {
 548                        priv = adapter->priv[i];
 549                        if (priv)
 550                                mwifiex_deauthenticate(priv, NULL);
 551                }
 552        }
 553
 554        priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA);
 555
 556        if (priv && priv->sched_scanning) {
 557#ifdef CONFIG_PM
 558                if (priv->wdev.wiphy->wowlan_config &&
 559                    !priv->wdev.wiphy->wowlan_config->nd_config) {
 560#endif
 561                        mwifiex_dbg(adapter, CMD, "aborting bgscan!\n");
 562                        mwifiex_stop_bg_scan(priv);
 563                        cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0);
 564#ifdef CONFIG_PM
 565                }
 566#endif
 567        }
 568
 569        if (adapter->hs_activated) {
 570                mwifiex_dbg(adapter, CMD,
 571                            "cmd: HS Already activated\n");
 572                return true;
 573        }
 574
 575        adapter->hs_activate_wait_q_woken = false;
 576
 577        memset(&hscfg, 0, sizeof(hscfg));
 578        hscfg.is_invoke_hostcmd = true;
 579
 580        adapter->hs_enabling = true;
 581        mwifiex_cancel_all_pending_cmd(adapter);
 582
 583        if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
 584                                                   MWIFIEX_BSS_ROLE_STA),
 585                                  HostCmd_ACT_GEN_SET, MWIFIEX_SYNC_CMD,
 586                                  &hscfg)) {
 587                mwifiex_dbg(adapter, ERROR,
 588                            "IOCTL request HS enable failed\n");
 589                return false;
 590        }
 591
 592        if (wait_event_interruptible_timeout(adapter->hs_activate_wait_q,
 593                                             adapter->hs_activate_wait_q_woken,
 594                                             (10 * HZ)) <= 0) {
 595                mwifiex_dbg(adapter, ERROR,
 596                            "hs_activate_wait_q terminated\n");
 597                return false;
 598        }
 599
 600        return true;
 601}
 602EXPORT_SYMBOL_GPL(mwifiex_enable_hs);
 603
 604/*
 605 * IOCTL request handler to get BSS information.
 606 *
 607 * This function collates the information from different driver structures
 608 * to send to the user.
 609 */
 610int mwifiex_get_bss_info(struct mwifiex_private *priv,
 611                         struct mwifiex_bss_info *info)
 612{
 613        struct mwifiex_adapter *adapter = priv->adapter;
 614        struct mwifiex_bssdescriptor *bss_desc;
 615
 616        if (!info)
 617                return -1;
 618
 619        bss_desc = &priv->curr_bss_params.bss_descriptor;
 620
 621        info->bss_mode = priv->bss_mode;
 622
 623        memcpy(&info->ssid, &bss_desc->ssid, sizeof(struct cfg80211_ssid));
 624
 625        memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN);
 626
 627        info->bss_chan = bss_desc->channel;
 628
 629        memcpy(info->country_code, adapter->country_code,
 630               IEEE80211_COUNTRY_STRING_LEN);
 631
 632        info->media_connected = priv->media_connected;
 633
 634        info->max_power_level = priv->max_tx_power_level;
 635        info->min_power_level = priv->min_tx_power_level;
 636
 637        info->adhoc_state = priv->adhoc_state;
 638
 639        info->bcn_nf_last = priv->bcn_nf_last;
 640
 641        if (priv->sec_info.wep_enabled)
 642                info->wep_status = true;
 643        else
 644                info->wep_status = false;
 645
 646        info->is_hs_configured = adapter->is_hs_configured;
 647        info->is_deep_sleep = adapter->is_deep_sleep;
 648
 649        return 0;
 650}
 651
 652/*
 653 * The function disables auto deep sleep mode.
 654 */
 655int mwifiex_disable_auto_ds(struct mwifiex_private *priv)
 656{
 657        struct mwifiex_ds_auto_ds auto_ds = {
 658                .auto_ds = DEEP_SLEEP_OFF,
 659        };
 660
 661        return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
 662                                DIS_AUTO_PS, BITMAP_AUTO_DS, &auto_ds, true);
 663}
 664EXPORT_SYMBOL_GPL(mwifiex_disable_auto_ds);
 665
 666/*
 667 * Sends IOCTL request to get the data rate.
 668 *
 669 * This function allocates the IOCTL request buffer, fills it
 670 * with requisite parameters and calls the IOCTL handler.
 671 */
 672int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, u32 *rate)
 673{
 674        int ret;
 675
 676        ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
 677                               HostCmd_ACT_GEN_GET, 0, NULL, true);
 678
 679        if (!ret) {
 680                if (priv->is_data_rate_auto)
 681                        *rate = mwifiex_index_to_data_rate(priv, priv->tx_rate,
 682                                                           priv->tx_htinfo);
 683                else
 684                        *rate = priv->data_rate;
 685        }
 686
 687        return ret;
 688}
 689
 690/*
 691 * IOCTL request handler to set tx power configuration.
 692 *
 693 * This function prepares the correct firmware command and
 694 * issues it.
 695 *
 696 * For non-auto power mode, all the following power groups are set -
 697 *      - Modulation class HR/DSSS
 698 *      - Modulation class OFDM
 699 *      - Modulation class HTBW20
 700 *      - Modulation class HTBW40
 701 */
 702int mwifiex_set_tx_power(struct mwifiex_private *priv,
 703                         struct mwifiex_power_cfg *power_cfg)
 704{
 705        int ret;
 706        struct host_cmd_ds_txpwr_cfg *txp_cfg;
 707        struct mwifiex_types_power_group *pg_tlv;
 708        struct mwifiex_power_group *pg;
 709        u8 *buf;
 710        u16 dbm = 0;
 711
 712        if (!power_cfg->is_power_auto) {
 713                dbm = (u16) power_cfg->power_level;
 714                if ((dbm < priv->min_tx_power_level) ||
 715                    (dbm > priv->max_tx_power_level)) {
 716                        mwifiex_dbg(priv->adapter, ERROR,
 717                                    "txpower value %d dBm\t"
 718                                    "is out of range (%d dBm-%d dBm)\n",
 719                                    dbm, priv->min_tx_power_level,
 720                                    priv->max_tx_power_level);
 721                        return -1;
 722                }
 723        }
 724        buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL);
 725        if (!buf)
 726                return -ENOMEM;
 727
 728        txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
 729        txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
 730        if (!power_cfg->is_power_auto) {
 731                txp_cfg->mode = cpu_to_le32(1);
 732                pg_tlv = (struct mwifiex_types_power_group *)
 733                         (buf + sizeof(struct host_cmd_ds_txpwr_cfg));
 734                pg_tlv->type = cpu_to_le16(TLV_TYPE_POWER_GROUP);
 735                pg_tlv->length =
 736                        cpu_to_le16(4 * sizeof(struct mwifiex_power_group));
 737                pg = (struct mwifiex_power_group *)
 738                     (buf + sizeof(struct host_cmd_ds_txpwr_cfg)
 739                      + sizeof(struct mwifiex_types_power_group));
 740                /* Power group for modulation class HR/DSSS */
 741                pg->first_rate_code = 0x00;
 742                pg->last_rate_code = 0x03;
 743                pg->modulation_class = MOD_CLASS_HR_DSSS;
 744                pg->power_step = 0;
 745                pg->power_min = (s8) dbm;
 746                pg->power_max = (s8) dbm;
 747                pg++;
 748                /* Power group for modulation class OFDM */
 749                pg->first_rate_code = 0x00;
 750                pg->last_rate_code = 0x07;
 751                pg->modulation_class = MOD_CLASS_OFDM;
 752                pg->power_step = 0;
 753                pg->power_min = (s8) dbm;
 754                pg->power_max = (s8) dbm;
 755                pg++;
 756                /* Power group for modulation class HTBW20 */
 757                pg->first_rate_code = 0x00;
 758                pg->last_rate_code = 0x20;
 759                pg->modulation_class = MOD_CLASS_HT;
 760                pg->power_step = 0;
 761                pg->power_min = (s8) dbm;
 762                pg->power_max = (s8) dbm;
 763                pg->ht_bandwidth = HT_BW_20;
 764                pg++;
 765                /* Power group for modulation class HTBW40 */
 766                pg->first_rate_code = 0x00;
 767                pg->last_rate_code = 0x20;
 768                pg->modulation_class = MOD_CLASS_HT;
 769                pg->power_step = 0;
 770                pg->power_min = (s8) dbm;
 771                pg->power_max = (s8) dbm;
 772                pg->ht_bandwidth = HT_BW_40;
 773        }
 774        ret = mwifiex_send_cmd(priv, HostCmd_CMD_TXPWR_CFG,
 775                               HostCmd_ACT_GEN_SET, 0, buf, true);
 776
 777        kfree(buf);
 778        return ret;
 779}
 780
 781/*
 782 * IOCTL request handler to get power save mode.
 783 *
 784 * This function prepares the correct firmware command and
 785 * issues it.
 786 */
 787int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
 788{
 789        int ret;
 790        struct mwifiex_adapter *adapter = priv->adapter;
 791        u16 sub_cmd;
 792
 793        if (*ps_mode)
 794                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
 795        else
 796                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
 797        sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
 798        ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
 799                               sub_cmd, BITMAP_STA_PS, NULL, true);
 800        if ((!ret) && (sub_cmd == DIS_AUTO_PS))
 801                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
 802                                       GET_PS, 0, NULL, false);
 803
 804        return ret;
 805}
 806
 807/*
 808 * IOCTL request handler to set/reset WPA IE.
 809 *
 810 * The supplied WPA IE is treated as a opaque buffer. Only the first field
 811 * is checked to determine WPA version. If buffer length is zero, the existing
 812 * WPA IE is reset.
 813 */
 814static int mwifiex_set_wpa_ie(struct mwifiex_private *priv,
 815                              u8 *ie_data_ptr, u16 ie_len)
 816{
 817        if (ie_len) {
 818                if (ie_len > sizeof(priv->wpa_ie)) {
 819                        mwifiex_dbg(priv->adapter, ERROR,
 820                                    "failed to copy WPA IE, too big\n");
 821                        return -1;
 822                }
 823                memcpy(priv->wpa_ie, ie_data_ptr, ie_len);
 824                priv->wpa_ie_len = ie_len;
 825                mwifiex_dbg(priv->adapter, CMD,
 826                            "cmd: Set Wpa_ie_len=%d IE=%#x\n",
 827                            priv->wpa_ie_len, priv->wpa_ie[0]);
 828
 829                if (priv->wpa_ie[0] == WLAN_EID_VENDOR_SPECIFIC) {
 830                        priv->sec_info.wpa_enabled = true;
 831                } else if (priv->wpa_ie[0] == WLAN_EID_RSN) {
 832                        priv->sec_info.wpa2_enabled = true;
 833                } else {
 834                        priv->sec_info.wpa_enabled = false;
 835                        priv->sec_info.wpa2_enabled = false;
 836                }
 837        } else {
 838                memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie));
 839                priv->wpa_ie_len = 0;
 840                mwifiex_dbg(priv->adapter, INFO,
 841                            "info: reset wpa_ie_len=%d IE=%#x\n",
 842                            priv->wpa_ie_len, priv->wpa_ie[0]);
 843                priv->sec_info.wpa_enabled = false;
 844                priv->sec_info.wpa2_enabled = false;
 845        }
 846
 847        return 0;
 848}
 849
 850/*
 851 * IOCTL request handler to set/reset WAPI IE.
 852 *
 853 * The supplied WAPI IE is treated as a opaque buffer. Only the first field
 854 * is checked to internally enable WAPI. If buffer length is zero, the existing
 855 * WAPI IE is reset.
 856 */
 857static int mwifiex_set_wapi_ie(struct mwifiex_private *priv,
 858                               u8 *ie_data_ptr, u16 ie_len)
 859{
 860        if (ie_len) {
 861                if (ie_len > sizeof(priv->wapi_ie)) {
 862                        mwifiex_dbg(priv->adapter, ERROR,
 863                                    "info: failed to copy WAPI IE, too big\n");
 864                        return -1;
 865                }
 866                memcpy(priv->wapi_ie, ie_data_ptr, ie_len);
 867                priv->wapi_ie_len = ie_len;
 868                mwifiex_dbg(priv->adapter, CMD,
 869                            "cmd: Set wapi_ie_len=%d IE=%#x\n",
 870                            priv->wapi_ie_len, priv->wapi_ie[0]);
 871
 872                if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY)
 873                        priv->sec_info.wapi_enabled = true;
 874        } else {
 875                memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie));
 876                priv->wapi_ie_len = ie_len;
 877                mwifiex_dbg(priv->adapter, INFO,
 878                            "info: Reset wapi_ie_len=%d IE=%#x\n",
 879                            priv->wapi_ie_len, priv->wapi_ie[0]);
 880                priv->sec_info.wapi_enabled = false;
 881        }
 882        return 0;
 883}
 884
 885/*
 886 * IOCTL request handler to set/reset WPS IE.
 887 *
 888 * The supplied WPS IE is treated as a opaque buffer. Only the first field
 889 * is checked to internally enable WPS. If buffer length is zero, the existing
 890 * WPS IE is reset.
 891 */
 892static int mwifiex_set_wps_ie(struct mwifiex_private *priv,
 893                               u8 *ie_data_ptr, u16 ie_len)
 894{
 895        if (ie_len) {
 896                if (ie_len > MWIFIEX_MAX_VSIE_LEN) {
 897                        mwifiex_dbg(priv->adapter, ERROR,
 898                                    "info: failed to copy WPS IE, too big\n");
 899                        return -1;
 900                }
 901
 902                priv->wps_ie = kzalloc(MWIFIEX_MAX_VSIE_LEN, GFP_KERNEL);
 903                if (!priv->wps_ie)
 904                        return -ENOMEM;
 905
 906                memcpy(priv->wps_ie, ie_data_ptr, ie_len);
 907                priv->wps_ie_len = ie_len;
 908                mwifiex_dbg(priv->adapter, CMD,
 909                            "cmd: Set wps_ie_len=%d IE=%#x\n",
 910                            priv->wps_ie_len, priv->wps_ie[0]);
 911        } else {
 912                kfree(priv->wps_ie);
 913                priv->wps_ie_len = ie_len;
 914                mwifiex_dbg(priv->adapter, INFO,
 915                            "info: Reset wps_ie_len=%d\n", priv->wps_ie_len);
 916        }
 917        return 0;
 918}
 919
 920/*
 921 * IOCTL request handler to set WAPI key.
 922 *
 923 * This function prepares the correct firmware command and
 924 * issues it.
 925 */
 926static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
 927                               struct mwifiex_ds_encrypt_key *encrypt_key)
 928{
 929
 930        return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
 931                                HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
 932                                encrypt_key, true);
 933}
 934
 935/*
 936 * IOCTL request handler to set WEP network key.
 937 *
 938 * This function prepares the correct firmware command and
 939 * issues it, after validation checks.
 940 */
 941static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 942                              struct mwifiex_ds_encrypt_key *encrypt_key)
 943{
 944        struct mwifiex_adapter *adapter = priv->adapter;
 945        int ret;
 946        struct mwifiex_wep_key *wep_key;
 947        int index;
 948
 949        if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
 950                priv->wep_key_curr_index = 0;
 951        wep_key = &priv->wep_key[priv->wep_key_curr_index];
 952        index = encrypt_key->key_index;
 953        if (encrypt_key->key_disable) {
 954                priv->sec_info.wep_enabled = 0;
 955        } else if (!encrypt_key->key_len) {
 956                /* Copy the required key as the current key */
 957                wep_key = &priv->wep_key[index];
 958                if (!wep_key->key_length) {
 959                        mwifiex_dbg(adapter, ERROR,
 960                                    "key not set, so cannot enable it\n");
 961                        return -1;
 962                }
 963
 964                if (adapter->key_api_major_ver == KEY_API_VER_MAJOR_V2) {
 965                        memcpy(encrypt_key->key_material,
 966                               wep_key->key_material, wep_key->key_length);
 967                        encrypt_key->key_len = wep_key->key_length;
 968                }
 969
 970                priv->wep_key_curr_index = (u16) index;
 971                priv->sec_info.wep_enabled = 1;
 972        } else {
 973                wep_key = &priv->wep_key[index];
 974                memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
 975                /* Copy the key in the driver */
 976                memcpy(wep_key->key_material,
 977                       encrypt_key->key_material,
 978                       encrypt_key->key_len);
 979                wep_key->key_index = index;
 980                wep_key->key_length = encrypt_key->key_len;
 981                priv->sec_info.wep_enabled = 1;
 982        }
 983        if (wep_key->key_length) {
 984                void *enc_key;
 985
 986                if (encrypt_key->key_disable) {
 987                        memset(&priv->wep_key[index], 0,
 988                               sizeof(struct mwifiex_wep_key));
 989                        goto done;
 990                }
 991
 992                if (adapter->key_api_major_ver == KEY_API_VER_MAJOR_V2)
 993                        enc_key = encrypt_key;
 994                else
 995                        enc_key = NULL;
 996
 997                /* Send request to firmware */
 998                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
 999                                       HostCmd_ACT_GEN_SET, 0, enc_key, false);
1000                if (ret)
1001                        return ret;
1002        }
1003
1004done:
1005        if (priv->sec_info.wep_enabled)
1006                priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
1007        else
1008                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
1009
1010        ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
1011                               HostCmd_ACT_GEN_SET, 0,
1012                               &priv->curr_pkt_filter, true);
1013
1014        return ret;
1015}
1016
1017/*
1018 * IOCTL request handler to set WPA key.
1019 *
1020 * This function prepares the correct firmware command and
1021 * issues it, after validation checks.
1022 *
1023 * Current driver only supports key length of up to 32 bytes.
1024 *
1025 * This function can also be used to disable a currently set key.
1026 */
1027static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
1028                              struct mwifiex_ds_encrypt_key *encrypt_key)
1029{
1030        int ret;
1031        u8 remove_key = false;
1032        struct host_cmd_ds_802_11_key_material *ibss_key;
1033
1034        /* Current driver only supports key length of up to 32 bytes */
1035        if (encrypt_key->key_len > WLAN_MAX_KEY_LEN) {
1036                mwifiex_dbg(priv->adapter, ERROR,
1037                            "key length too long\n");
1038                return -1;
1039        }
1040
1041        if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
1042                /*
1043                 * IBSS/WPA-None uses only one key (Group) for both receiving
1044                 * and sending unicast and multicast packets.
1045                 */
1046                /* Send the key as PTK to firmware */
1047                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
1048                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
1049                                       HostCmd_ACT_GEN_SET,
1050                                       KEY_INFO_ENABLED, encrypt_key, false);
1051                if (ret)
1052                        return ret;
1053
1054                ibss_key = &priv->aes_key;
1055                memset(ibss_key, 0,
1056                       sizeof(struct host_cmd_ds_802_11_key_material));
1057                /* Copy the key in the driver */
1058                memcpy(ibss_key->key_param_set.key, encrypt_key->key_material,
1059                       encrypt_key->key_len);
1060                memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len,
1061                       sizeof(ibss_key->key_param_set.key_len));
1062                ibss_key->key_param_set.key_type_id
1063                        = cpu_to_le16(KEY_TYPE_ID_TKIP);
1064                ibss_key->key_param_set.key_info = cpu_to_le16(KEY_ENABLED);
1065
1066                /* Send the key as GTK to firmware */
1067                encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST;
1068        }
1069
1070        if (!encrypt_key->key_index)
1071                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
1072
1073        if (remove_key)
1074                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
1075                                       HostCmd_ACT_GEN_SET,
1076                                       !KEY_INFO_ENABLED, encrypt_key, true);
1077        else
1078                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
1079                                       HostCmd_ACT_GEN_SET,
1080                                       KEY_INFO_ENABLED, encrypt_key, true);
1081
1082        return ret;
1083}
1084
1085/*
1086 * IOCTL request handler to set/get network keys.
1087 *
1088 * This is a generic key handling function which supports WEP, WPA
1089 * and WAPI.
1090 */
1091static int
1092mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
1093                              struct mwifiex_ds_encrypt_key *encrypt_key)
1094{
1095        int status;
1096
1097        if (encrypt_key->is_wapi_key)
1098                status = mwifiex_sec_ioctl_set_wapi_key(priv, encrypt_key);
1099        else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104)
1100                status = mwifiex_sec_ioctl_set_wpa_key(priv, encrypt_key);
1101        else
1102                status = mwifiex_sec_ioctl_set_wep_key(priv, encrypt_key);
1103        return status;
1104}
1105
1106/*
1107 * This function returns the driver version.
1108 */
1109int
1110mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
1111                               int max_len)
1112{
1113        union {
1114                __le32 l;
1115                u8 c[4];
1116        } ver;
1117        char fw_ver[32];
1118
1119        ver.l = cpu_to_le32(adapter->fw_release_number);
1120        sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]);
1121
1122        snprintf(version, max_len, driver_version, fw_ver);
1123
1124        mwifiex_dbg(adapter, MSG, "info: MWIFIEX VERSION: %s\n", version);
1125
1126        return 0;
1127}
1128
1129/*
1130 * Sends IOCTL request to set encoding parameters.
1131 *
1132 * This function allocates the IOCTL request buffer, fills it
1133 * with requisite parameters and calls the IOCTL handler.
1134 */
1135int mwifiex_set_encode(struct mwifiex_private *priv, struct key_params *kp,
1136                       const u8 *key, int key_len, u8 key_index,
1137                       const u8 *mac_addr, int disable)
1138{
1139        struct mwifiex_ds_encrypt_key encrypt_key;
1140
1141        memset(&encrypt_key, 0, sizeof(encrypt_key));
1142        encrypt_key.key_len = key_len;
1143        encrypt_key.key_index = key_index;
1144
1145        if (kp && kp->cipher == WLAN_CIPHER_SUITE_AES_CMAC)
1146                encrypt_key.is_igtk_key = true;
1147
1148        if (!disable) {
1149                if (key_len)
1150                        memcpy(encrypt_key.key_material, key, key_len);
1151                else
1152                        encrypt_key.is_current_wep_key = true;
1153
1154                if (mac_addr)
1155                        memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
1156                if (kp && kp->seq && kp->seq_len) {
1157                        memcpy(encrypt_key.pn, kp->seq, kp->seq_len);
1158                        encrypt_key.pn_len = kp->seq_len;
1159                        encrypt_key.is_rx_seq_valid = true;
1160                }
1161        } else {
1162                encrypt_key.key_disable = true;
1163                if (mac_addr)
1164                        memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
1165        }
1166
1167        return mwifiex_sec_ioctl_encrypt_key(priv, &encrypt_key);
1168}
1169
1170/*
1171 * Sends IOCTL request to get extended version.
1172 *
1173 * This function allocates the IOCTL request buffer, fills it
1174 * with requisite parameters and calls the IOCTL handler.
1175 */
1176int
1177mwifiex_get_ver_ext(struct mwifiex_private *priv, u32 version_str_sel)
1178{
1179        struct mwifiex_ver_ext ver_ext;
1180
1181        memset(&ver_ext, 0, sizeof(ver_ext));
1182        ver_ext.version_str_sel = version_str_sel;
1183        if (mwifiex_send_cmd(priv, HostCmd_CMD_VERSION_EXT,
1184                             HostCmd_ACT_GEN_GET, 0, &ver_ext, true))
1185                return -1;
1186
1187        return 0;
1188}
1189
1190int
1191mwifiex_remain_on_chan_cfg(struct mwifiex_private *priv, u16 action,
1192                           struct ieee80211_channel *chan,
1193                           unsigned int duration)
1194{
1195        struct host_cmd_ds_remain_on_chan roc_cfg;
1196        u8 sc;
1197
1198        memset(&roc_cfg, 0, sizeof(roc_cfg));
1199        roc_cfg.action = cpu_to_le16(action);
1200        if (action == HostCmd_ACT_GEN_SET) {
1201                roc_cfg.band_cfg = chan->band;
1202                sc = mwifiex_chan_type_to_sec_chan_offset(NL80211_CHAN_NO_HT);
1203                roc_cfg.band_cfg |= (sc << 2);
1204
1205                roc_cfg.channel =
1206                        ieee80211_frequency_to_channel(chan->center_freq);
1207                roc_cfg.duration = cpu_to_le32(duration);
1208        }
1209        if (mwifiex_send_cmd(priv, HostCmd_CMD_REMAIN_ON_CHAN,
1210                             action, 0, &roc_cfg, true)) {
1211                mwifiex_dbg(priv->adapter, ERROR,
1212                            "failed to remain on channel\n");
1213                return -1;
1214        }
1215
1216        return roc_cfg.status;
1217}
1218
1219/*
1220 * Sends IOCTL request to get statistics information.
1221 *
1222 * This function allocates the IOCTL request buffer, fills it
1223 * with requisite parameters and calls the IOCTL handler.
1224 */
1225int
1226mwifiex_get_stats_info(struct mwifiex_private *priv,
1227                       struct mwifiex_ds_get_stats *log)
1228{
1229        return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_GET_LOG,
1230                                HostCmd_ACT_GEN_GET, 0, log, true);
1231}
1232
1233/*
1234 * IOCTL request handler to read/write register.
1235 *
1236 * This function prepares the correct firmware command and
1237 * issues it.
1238 *
1239 * Access to the following registers are supported -
1240 *      - MAC
1241 *      - BBP
1242 *      - RF
1243 *      - PMIC
1244 *      - CAU
1245 */
1246static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
1247                                        struct mwifiex_ds_reg_rw *reg_rw,
1248                                        u16 action)
1249{
1250        u16 cmd_no;
1251
1252        switch (reg_rw->type) {
1253        case MWIFIEX_REG_MAC:
1254                cmd_no = HostCmd_CMD_MAC_REG_ACCESS;
1255                break;
1256        case MWIFIEX_REG_BBP:
1257                cmd_no = HostCmd_CMD_BBP_REG_ACCESS;
1258                break;
1259        case MWIFIEX_REG_RF:
1260                cmd_no = HostCmd_CMD_RF_REG_ACCESS;
1261                break;
1262        case MWIFIEX_REG_PMIC:
1263                cmd_no = HostCmd_CMD_PMIC_REG_ACCESS;
1264                break;
1265        case MWIFIEX_REG_CAU:
1266                cmd_no = HostCmd_CMD_CAU_REG_ACCESS;
1267                break;
1268        default:
1269                return -1;
1270        }
1271
1272        return mwifiex_send_cmd(priv, cmd_no, action, 0, reg_rw, true);
1273}
1274
1275/*
1276 * Sends IOCTL request to write to a register.
1277 *
1278 * This function allocates the IOCTL request buffer, fills it
1279 * with requisite parameters and calls the IOCTL handler.
1280 */
1281int
1282mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
1283                  u32 reg_offset, u32 reg_value)
1284{
1285        struct mwifiex_ds_reg_rw reg_rw;
1286
1287        reg_rw.type = reg_type;
1288        reg_rw.offset = reg_offset;
1289        reg_rw.value = reg_value;
1290
1291        return mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_SET);
1292}
1293
1294/*
1295 * Sends IOCTL request to read from a register.
1296 *
1297 * This function allocates the IOCTL request buffer, fills it
1298 * with requisite parameters and calls the IOCTL handler.
1299 */
1300int
1301mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
1302                 u32 reg_offset, u32 *value)
1303{
1304        int ret;
1305        struct mwifiex_ds_reg_rw reg_rw;
1306
1307        reg_rw.type = reg_type;
1308        reg_rw.offset = reg_offset;
1309        ret = mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_GET);
1310
1311        if (ret)
1312                goto done;
1313
1314        *value = reg_rw.value;
1315
1316done:
1317        return ret;
1318}
1319
1320/*
1321 * Sends IOCTL request to read from EEPROM.
1322 *
1323 * This function allocates the IOCTL request buffer, fills it
1324 * with requisite parameters and calls the IOCTL handler.
1325 */
1326int
1327mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
1328                    u8 *value)
1329{
1330        int ret;
1331        struct mwifiex_ds_read_eeprom rd_eeprom;
1332
1333        rd_eeprom.offset =  offset;
1334        rd_eeprom.byte_count = bytes;
1335
1336        /* Send request to firmware */
1337        ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
1338                               HostCmd_ACT_GEN_GET, 0, &rd_eeprom, true);
1339
1340        if (!ret)
1341                memcpy(value, rd_eeprom.value, min((u16)MAX_EEPROM_DATA,
1342                       rd_eeprom.byte_count));
1343        return ret;
1344}
1345
1346/*
1347 * This function sets a generic IE. In addition to generic IE, it can
1348 * also handle WPA, WPA2 and WAPI IEs.
1349 */
1350static int
1351mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr,
1352                          u16 ie_len)
1353{
1354        struct ieee_types_vendor_header *pvendor_ie;
1355        const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 };
1356        const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 };
1357        u16 unparsed_len = ie_len, cur_ie_len;
1358
1359        /* If the passed length is zero, reset the buffer */
1360        if (!ie_len) {
1361                priv->gen_ie_buf_len = 0;
1362                priv->wps.session_enable = false;
1363                return 0;
1364        } else if (!ie_data_ptr ||
1365                   ie_len <= sizeof(struct ieee_types_header)) {
1366                return -1;
1367        }
1368        pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
1369
1370        while (pvendor_ie) {
1371                cur_ie_len = pvendor_ie->len + sizeof(struct ieee_types_header);
1372
1373                if (pvendor_ie->element_id == WLAN_EID_RSN) {
1374                        /* IE is a WPA/WPA2 IE so call set_wpa function */
1375                        mwifiex_set_wpa_ie(priv, (u8 *)pvendor_ie, cur_ie_len);
1376                        priv->wps.session_enable = false;
1377                        goto next_ie;
1378                }
1379
1380                if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) {
1381                        /* IE is a WAPI IE so call set_wapi function */
1382                        mwifiex_set_wapi_ie(priv, (u8 *)pvendor_ie,
1383                                            cur_ie_len);
1384                        goto next_ie;
1385                }
1386
1387                if (pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC) {
1388                        /* Test to see if it is a WPA IE, if not, then
1389                         * it is a gen IE
1390                         */
1391                        if (!memcmp(pvendor_ie->oui, wpa_oui,
1392                                    sizeof(wpa_oui))) {
1393                                /* IE is a WPA/WPA2 IE so call set_wpa function
1394                                 */
1395                                mwifiex_set_wpa_ie(priv, (u8 *)pvendor_ie,
1396                                                   cur_ie_len);
1397                                priv->wps.session_enable = false;
1398                                goto next_ie;
1399                        }
1400
1401                        if (!memcmp(pvendor_ie->oui, wps_oui,
1402                                    sizeof(wps_oui))) {
1403                                /* Test to see if it is a WPS IE,
1404                                 * if so, enable wps session flag
1405                                 */
1406                                priv->wps.session_enable = true;
1407                                mwifiex_dbg(priv->adapter, MSG,
1408                                            "WPS Session Enabled.\n");
1409                                mwifiex_set_wps_ie(priv, (u8 *)pvendor_ie,
1410                                                   cur_ie_len);
1411                                goto next_ie;
1412                        }
1413                }
1414
1415                /* Saved in gen_ie, such as P2P IE.etc.*/
1416
1417                /* Verify that the passed length is not larger than the
1418                 * available space remaining in the buffer
1419                 */
1420                if (cur_ie_len <
1421                    (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) {
1422                        /* Append the passed data to the end
1423                         * of the genIeBuffer
1424                         */
1425                        memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len,
1426                               (u8 *)pvendor_ie, cur_ie_len);
1427                        /* Increment the stored buffer length by the
1428                         * size passed
1429                         */
1430                        priv->gen_ie_buf_len += cur_ie_len;
1431                }
1432
1433next_ie:
1434                unparsed_len -= cur_ie_len;
1435
1436                if (unparsed_len <= sizeof(struct ieee_types_header))
1437                        pvendor_ie = NULL;
1438                else
1439                        pvendor_ie = (struct ieee_types_vendor_header *)
1440                                (((u8 *)pvendor_ie) + cur_ie_len);
1441        }
1442
1443        return 0;
1444}
1445
1446/*
1447 * IOCTL request handler to set/get generic IE.
1448 *
1449 * In addition to various generic IEs, this function can also be
1450 * used to set the ARP filter.
1451 */
1452static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
1453                                     struct mwifiex_ds_misc_gen_ie *gen_ie,
1454                                     u16 action)
1455{
1456        struct mwifiex_adapter *adapter = priv->adapter;
1457
1458        switch (gen_ie->type) {
1459        case MWIFIEX_IE_TYPE_GEN_IE:
1460                if (action == HostCmd_ACT_GEN_GET) {
1461                        gen_ie->len = priv->wpa_ie_len;
1462                        memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len);
1463                } else {
1464                        mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data,
1465                                                  (u16) gen_ie->len);
1466                }
1467                break;
1468        case MWIFIEX_IE_TYPE_ARP_FILTER:
1469                memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter));
1470                if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) {
1471                        adapter->arp_filter_size = 0;
1472                        mwifiex_dbg(adapter, ERROR,
1473                                    "invalid ARP filter size\n");
1474                        return -1;
1475                } else {
1476                        memcpy(adapter->arp_filter, gen_ie->ie_data,
1477                               gen_ie->len);
1478                        adapter->arp_filter_size = gen_ie->len;
1479                }
1480                break;
1481        default:
1482                mwifiex_dbg(adapter, ERROR, "invalid IE type\n");
1483                return -1;
1484        }
1485        return 0;
1486}
1487
1488/*
1489 * Sends IOCTL request to set a generic IE.
1490 *
1491 * This function allocates the IOCTL request buffer, fills it
1492 * with requisite parameters and calls the IOCTL handler.
1493 */
1494int
1495mwifiex_set_gen_ie(struct mwifiex_private *priv, const u8 *ie, int ie_len)
1496{
1497        struct mwifiex_ds_misc_gen_ie gen_ie;
1498
1499        if (ie_len > IEEE_MAX_IE_SIZE)
1500                return -EFAULT;
1501
1502        gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE;
1503        gen_ie.len = ie_len;
1504        memcpy(gen_ie.ie_data, ie, ie_len);
1505        if (mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET))
1506                return -EFAULT;
1507
1508        return 0;
1509}
1510
1511/* This function get Host Sleep wake up reason.
1512 *
1513 */
1514int mwifiex_get_wakeup_reason(struct mwifiex_private *priv, u16 action,
1515                              int cmd_type,
1516                              struct mwifiex_ds_wakeup_reason *wakeup_reason)
1517{
1518        int status = 0;
1519
1520        status = mwifiex_send_cmd(priv, HostCmd_CMD_HS_WAKEUP_REASON,
1521                                  HostCmd_ACT_GEN_GET, 0, wakeup_reason,
1522                                  cmd_type == MWIFIEX_SYNC_CMD);
1523
1524        return status;
1525}
1526