linux/arch/mips/sni/time.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2#include <linux/types.h>
   3#include <linux/i8253.h>
   4#include <linux/interrupt.h>
   5#include <linux/irq.h>
   6#include <linux/smp.h>
   7#include <linux/time.h>
   8#include <linux/clockchips.h>
   9
  10#include <asm/sni.h>
  11#include <asm/time.h>
  12
  13#define SNI_CLOCK_TICK_RATE     3686400
  14#define SNI_COUNTER2_DIV        64
  15#define SNI_COUNTER0_DIV        ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
  16
  17static int a20r_set_periodic(struct clock_event_device *evt)
  18{
  19        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
  20        wmb();
  21        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
  22        wmb();
  23        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
  24        wmb();
  25
  26        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
  27        wmb();
  28        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
  29        wmb();
  30        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
  31        wmb();
  32        return 0;
  33}
  34
  35static struct clock_event_device a20r_clockevent_device = {
  36        .name                   = "a20r-timer",
  37        .features               = CLOCK_EVT_FEAT_PERIODIC,
  38
  39        /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
  40
  41        .rating                 = 300,
  42        .irq                    = SNI_A20R_IRQ_TIMER,
  43        .set_state_periodic     = a20r_set_periodic,
  44};
  45
  46static irqreturn_t a20r_interrupt(int irq, void *dev_id)
  47{
  48        struct clock_event_device *cd = dev_id;
  49
  50        *(volatile u8 *)A20R_PT_TIM0_ACK = 0;
  51        wmb();
  52
  53        cd->event_handler(cd);
  54
  55        return IRQ_HANDLED;
  56}
  57
  58static struct irqaction a20r_irqaction = {
  59        .handler        = a20r_interrupt,
  60        .flags          = IRQF_PERCPU | IRQF_TIMER,
  61        .name           = "a20r-timer",
  62};
  63
  64/*
  65 * a20r platform uses 2 counters to divide the input frequency.
  66 * Counter 2 output is connected to Counter 0 & 1 input.
  67 */
  68static void __init sni_a20r_timer_setup(void)
  69{
  70        struct clock_event_device *cd = &a20r_clockevent_device;
  71        struct irqaction *action = &a20r_irqaction;
  72        unsigned int cpu = smp_processor_id();
  73
  74        cd->cpumask             = cpumask_of(cpu);
  75        clockevents_register_device(cd);
  76        action->dev_id = cd;
  77        setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
  78}
  79
  80#define SNI_8254_TICK_RATE        1193182UL
  81
  82#define SNI_8254_TCSAMP_COUNTER   ((SNI_8254_TICK_RATE / HZ) + 255)
  83
  84static __init unsigned long dosample(void)
  85{
  86        u32 ct0, ct1;
  87        volatile u8 msb;
  88
  89        /* Start the counter. */
  90        outb_p(0x34, 0x43);
  91        outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40);
  92        outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
  93
  94        /* Get initial counter invariant */
  95        ct0 = read_c0_count();
  96
  97        /* Latch and spin until top byte of counter0 is zero */
  98        do {
  99                outb(0x00, 0x43);
 100                (void) inb(0x40);
 101                msb = inb(0x40);
 102                ct1 = read_c0_count();
 103        } while (msb);
 104
 105        /* Stop the counter. */
 106        outb(0x38, 0x43);
 107        /*
 108         * Return the difference, this is how far the r4k counter increments
 109         * for every 1/HZ seconds. We round off the nearest 1 MHz of master
 110         * clock (= 1000000 / HZ / 2).
 111         */
 112        /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
 113        return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
 114}
 115
 116/*
 117 * Here we need to calibrate the cycle counter to at least be close.
 118 */
 119void __init plat_time_init(void)
 120{
 121        unsigned long r4k_ticks[3];
 122        unsigned long r4k_tick;
 123
 124        /*
 125         * Figure out the r4k offset, the algorithm is very simple and works in
 126         * _all_ cases as long as the 8254 counter register itself works ok (as
 127         * an interrupt driving timer it does not because of bug, this is why
 128         * we are using the onchip r4k counter/compare register to serve this
 129         * purpose, but for r4k_offset calculation it will work ok for us).
 130         * There are other very complicated ways of performing this calculation
 131         * but this one works just fine so I am not going to futz around. ;-)
 132         */
 133        printk(KERN_INFO "Calibrating system timer... ");
 134        dosample();     /* Prime cache. */
 135        dosample();     /* Prime cache. */
 136        /* Zero is NOT an option. */
 137        do {
 138                r4k_ticks[0] = dosample();
 139        } while (!r4k_ticks[0]);
 140        do {
 141                r4k_ticks[1] = dosample();
 142        } while (!r4k_ticks[1]);
 143
 144        if (r4k_ticks[0] != r4k_ticks[1]) {
 145                printk("warning: timer counts differ, retrying... ");
 146                r4k_ticks[2] = dosample();
 147                if (r4k_ticks[2] == r4k_ticks[0]
 148                    || r4k_ticks[2] == r4k_ticks[1])
 149                        r4k_tick = r4k_ticks[2];
 150                else {
 151                        printk("disagreement, using average... ");
 152                        r4k_tick = (r4k_ticks[0] + r4k_ticks[1]
 153                                   + r4k_ticks[2]) / 3;
 154                }
 155        } else
 156                r4k_tick = r4k_ticks[0];
 157
 158        printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
 159                (int) (r4k_tick / (500000 / HZ)),
 160                (int) (r4k_tick % (500000 / HZ)));
 161
 162        mips_hpt_frequency = r4k_tick * HZ;
 163
 164        switch (sni_brd_type) {
 165        case SNI_BRD_10:
 166        case SNI_BRD_10NEW:
 167        case SNI_BRD_TOWER_OASIC:
 168        case SNI_BRD_MINITOWER:
 169                sni_a20r_timer_setup();
 170                break;
 171        }
 172        setup_pit_timer();
 173}
 174
 175void read_persistent_clock(struct timespec *ts)
 176{
 177        ts->tv_sec = -1;
 178        ts->tv_nsec = 0;
 179}
 180