linux/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
<<
>>
Prefs
   1/******************************************************************************
   2 *
   3 * Copyright(c) 2009-2012  Realtek Corporation.
   4 *
   5 * This program is free software; you can redistribute it and/or modify it
   6 * under the terms of version 2 of the GNU General Public License as
   7 * published by the Free Software Foundation.
   8 *
   9 * This program is distributed in the hope that it will be useful, but WITHOUT
  10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12 * more details.
  13 *
  14 * The full GNU General Public License is included in this distribution in the
  15 * file called LICENSE.
  16 *
  17 * Contact Information:
  18 * wlanfae <wlanfae@realtek.com>
  19 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  20 * Hsinchu 300, Taiwan.
  21 *
  22 * Larry Finger <Larry.Finger@lwfinger.net>
  23 *
  24 *****************************************************************************/
  25
  26#include "../wifi.h"
  27#include "reg.h"
  28#include "def.h"
  29#include "phy.h"
  30#include "rf.h"
  31#include "dm.h"
  32
  33static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
  34
  35void rtl92cu_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
  36{
  37        struct rtl_priv *rtlpriv = rtl_priv(hw);
  38        struct rtl_phy *rtlphy = &(rtlpriv->phy);
  39
  40        switch (bandwidth) {
  41        case HT_CHANNEL_WIDTH_20:
  42                rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
  43                                             0xfffff3ff) | 0x0400);
  44                rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
  45                              rtlphy->rfreg_chnlval[0]);
  46                break;
  47        case HT_CHANNEL_WIDTH_20_40:
  48                rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
  49                                             0xfffff3ff));
  50                rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
  51                              rtlphy->rfreg_chnlval[0]);
  52                break;
  53        default:
  54                pr_err("unknown bandwidth: %#X\n", bandwidth);
  55                break;
  56        }
  57}
  58
  59void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
  60                                        u8 *ppowerlevel)
  61{
  62        struct rtl_priv *rtlpriv = rtl_priv(hw);
  63        struct rtl_phy *rtlphy = &(rtlpriv->phy);
  64        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
  65        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
  66        u32 tx_agc[2] = { 0, 0 }, tmpval = 0;
  67        bool turbo_scanoff = false;
  68        u8 idx1, idx2;
  69        u8 *ptr;
  70
  71        if ((rtlefuse->eeprom_regulatory != 0) || (rtlefuse->external_pa))
  72                turbo_scanoff = true;
  73        if (mac->act_scanning) {
  74                tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
  75                tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
  76                for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
  77                        tx_agc[idx1] = ppowerlevel[idx1] |
  78                            (ppowerlevel[idx1] << 8) |
  79                            (ppowerlevel[idx1] << 16) |
  80                            (ppowerlevel[idx1] << 24);
  81                        if (tx_agc[idx1] > 0x20 && rtlefuse->external_pa)
  82                                tx_agc[idx1] = 0x20;
  83                }
  84        } else {
  85                if (rtlpriv->dm.dynamic_txhighpower_lvl ==
  86                    TXHIGHPWRLEVEL_LEVEL1) {
  87                        tx_agc[RF90_PATH_A] = 0x10101010;
  88                        tx_agc[RF90_PATH_B] = 0x10101010;
  89                } else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
  90                           TXHIGHPWRLEVEL_LEVEL2) {
  91                        tx_agc[RF90_PATH_A] = 0x00000000;
  92                        tx_agc[RF90_PATH_B] = 0x00000000;
  93                } else {
  94                        for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
  95                                tx_agc[idx1] = ppowerlevel[idx1] |
  96                                    (ppowerlevel[idx1] << 8) |
  97                                    (ppowerlevel[idx1] << 16) |
  98                                    (ppowerlevel[idx1] << 24);
  99                        }
 100                        if (rtlefuse->eeprom_regulatory == 0) {
 101                                tmpval = (rtlphy->mcs_offset[0][6]) +
 102                                        (rtlphy->mcs_offset[0][7] <<  8);
 103                                tx_agc[RF90_PATH_A] += tmpval;
 104                                tmpval = (rtlphy->mcs_offset[0][14]) +
 105                                        (rtlphy->mcs_offset[0][15] << 24);
 106                                tx_agc[RF90_PATH_B] += tmpval;
 107                        }
 108                }
 109        }
 110        for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
 111                ptr = (u8 *) (&(tx_agc[idx1]));
 112                for (idx2 = 0; idx2 < 4; idx2++) {
 113                        if (*ptr > RF6052_MAX_TX_PWR)
 114                                *ptr = RF6052_MAX_TX_PWR;
 115                        ptr++;
 116                }
 117        }
 118        tmpval = tx_agc[RF90_PATH_A] & 0xff;
 119        rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
 120
 121        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 122                "CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n",
 123                tmpval, RTXAGC_A_CCK1_MCS32);
 124
 125        tmpval = tx_agc[RF90_PATH_A] >> 8;
 126        if (mac->mode == WIRELESS_MODE_B)
 127                tmpval = tmpval & 0xff00ffff;
 128        rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
 129        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 130                "CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n",
 131                tmpval, RTXAGC_B_CCK11_A_CCK2_11);
 132        tmpval = tx_agc[RF90_PATH_B] >> 24;
 133        rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
 134        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 135                "CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n",
 136                tmpval, RTXAGC_B_CCK11_A_CCK2_11);
 137        tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
 138        rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
 139        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 140                "CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n",
 141                tmpval, RTXAGC_B_CCK1_55_MCS32);
 142}
 143
 144static void rtl92c_phy_get_power_base(struct ieee80211_hw *hw,
 145                                      u8 *ppowerlevel, u8 channel,
 146                                      u32 *ofdmbase, u32 *mcsbase)
 147{
 148        struct rtl_priv *rtlpriv = rtl_priv(hw);
 149        struct rtl_phy *rtlphy = &(rtlpriv->phy);
 150        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 151        u32 powerBase0, powerBase1;
 152        u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0;
 153        u8 i, powerlevel[2];
 154
 155        for (i = 0; i < 2; i++) {
 156                powerlevel[i] = ppowerlevel[i];
 157                legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff[i][channel - 1];
 158                powerBase0 = powerlevel[i] + legacy_pwrdiff;
 159                powerBase0 = (powerBase0 << 24) | (powerBase0 << 16) |
 160                    (powerBase0 << 8) | powerBase0;
 161                *(ofdmbase + i) = powerBase0;
 162                RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 163                        " [OFDM power base index rf(%c) = 0x%x]\n",
 164                        i == 0 ? 'A' : 'B', *(ofdmbase + i));
 165        }
 166        for (i = 0; i < 2; i++) {
 167                if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
 168                        ht20_pwrdiff = rtlefuse->txpwr_ht20diff[i][channel - 1];
 169                        powerlevel[i] += ht20_pwrdiff;
 170                }
 171                powerBase1 = powerlevel[i];
 172                powerBase1 = (powerBase1 << 24) |
 173                    (powerBase1 << 16) | (powerBase1 << 8) | powerBase1;
 174                *(mcsbase + i) = powerBase1;
 175                RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 176                        " [MCS power base index rf(%c) = 0x%x]\n",
 177                        i == 0 ? 'A' : 'B', *(mcsbase + i));
 178        }
 179}
 180
 181static void _rtl92c_get_txpower_writeval_by_regulatory(struct ieee80211_hw *hw,
 182                                                       u8 channel, u8 index,
 183                                                       u32 *powerBase0,
 184                                                       u32 *powerBase1,
 185                                                       u32 *p_outwriteval)
 186{
 187        struct rtl_priv *rtlpriv = rtl_priv(hw);
 188        struct rtl_phy *rtlphy = &(rtlpriv->phy);
 189        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 190        u8 i, chnlgroup = 0, pwr_diff_limit[4];
 191        u32 writeVal, customer_limit, rf;
 192
 193        for (rf = 0; rf < 2; rf++) {
 194                switch (rtlefuse->eeprom_regulatory) {
 195                case 0:
 196                        chnlgroup = 0;
 197                        writeVal = rtlphy->mcs_offset
 198                            [chnlgroup][index + (rf ? 8 : 0)]
 199                            + ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
 200                        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 201                                "RTK better performance,writeVal(%c) = 0x%x\n",
 202                                rf == 0 ? 'A' : 'B', writeVal);
 203                        break;
 204                case 1:
 205                        if (rtlphy->pwrgroup_cnt == 1)
 206                                chnlgroup = 0;
 207                        if (rtlphy->pwrgroup_cnt >= 3) {
 208                                if (channel <= 3)
 209                                        chnlgroup = 0;
 210                                else if (channel >= 4 && channel <= 9)
 211                                        chnlgroup = 1;
 212                                else if (channel > 9)
 213                                        chnlgroup = 2;
 214                                if (rtlphy->current_chan_bw ==
 215                                    HT_CHANNEL_WIDTH_20)
 216                                        chnlgroup++;
 217                                else
 218                                        chnlgroup += 4;
 219                        }
 220                        writeVal = rtlphy->mcs_offset[chnlgroup][index +
 221                                        (rf ? 8 : 0)] +
 222                                        ((index < 2) ? powerBase0[rf] :
 223                                        powerBase1[rf]);
 224                        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 225                                "Realtek regulatory, 20MHz, writeVal(%c) = 0x%x\n",
 226                                rf == 0 ? 'A' : 'B', writeVal);
 227                        break;
 228                case 2:
 229                        writeVal = ((index < 2) ? powerBase0[rf] :
 230                                   powerBase1[rf]);
 231                        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 232                                "Better regulatory,writeVal(%c) = 0x%x\n",
 233                                rf == 0 ? 'A' : 'B', writeVal);
 234                        break;
 235                case 3:
 236                        chnlgroup = 0;
 237                        if (rtlphy->current_chan_bw ==
 238                            HT_CHANNEL_WIDTH_20_40) {
 239                                RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 240                                        "customer's limit, 40MHzrf(%c) = 0x%x\n",
 241                                        rf == 0 ? 'A' : 'B',
 242                                        rtlefuse->pwrgroup_ht40[rf]
 243                                        [channel - 1]);
 244                        } else {
 245                                RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 246                                        "customer's limit, 20MHz rf(%c) = 0x%x\n",
 247                                        rf == 0 ? 'A' : 'B',
 248                                        rtlefuse->pwrgroup_ht20[rf]
 249                                        [channel - 1]);
 250                        }
 251                        for (i = 0; i < 4; i++) {
 252                                pwr_diff_limit[i] = (u8) ((rtlphy->mcs_offset
 253                                    [chnlgroup][index + (rf ? 8 : 0)]
 254                                    & (0x7f << (i * 8))) >> (i * 8));
 255                                if (rtlphy->current_chan_bw ==
 256                                    HT_CHANNEL_WIDTH_20_40) {
 257                                        if (pwr_diff_limit[i] >
 258                                            rtlefuse->pwrgroup_ht40[rf]
 259                                                [channel - 1])
 260                                                pwr_diff_limit[i] = rtlefuse->
 261                                                    pwrgroup_ht40[rf]
 262                                                    [channel - 1];
 263                                } else {
 264                                        if (pwr_diff_limit[i] >
 265                                            rtlefuse->pwrgroup_ht20[rf]
 266                                                [channel - 1])
 267                                                pwr_diff_limit[i] =
 268                                                    rtlefuse->pwrgroup_ht20[rf]
 269                                                    [channel - 1];
 270                                }
 271                        }
 272                        customer_limit = (pwr_diff_limit[3] << 24) |
 273                            (pwr_diff_limit[2] << 16) |
 274                            (pwr_diff_limit[1] << 8) | (pwr_diff_limit[0]);
 275                        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 276                                "Customer's limit rf(%c) = 0x%x\n",
 277                                rf == 0 ? 'A' : 'B', customer_limit);
 278                        writeVal = customer_limit + ((index < 2) ?
 279                                   powerBase0[rf] : powerBase1[rf]);
 280                        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 281                                "Customer, writeVal rf(%c)= 0x%x\n",
 282                                rf == 0 ? 'A' : 'B', writeVal);
 283                        break;
 284                default:
 285                        chnlgroup = 0;
 286                        writeVal = rtlphy->mcs_offset[chnlgroup]
 287                                   [index + (rf ? 8 : 0)] + ((index < 2) ?
 288                                   powerBase0[rf] : powerBase1[rf]);
 289                        RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 290                                "RTK better performance, writeValrf(%c) = 0x%x\n",
 291                                rf == 0 ? 'A' : 'B', writeVal);
 292                        break;
 293                }
 294                if (rtlpriv->dm.dynamic_txhighpower_lvl ==
 295                    TXHIGHPWRLEVEL_LEVEL1)
 296                        writeVal = 0x14141414;
 297                else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
 298                         TXHIGHPWRLEVEL_LEVEL2)
 299                        writeVal = 0x00000000;
 300                if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1)
 301                        writeVal = writeVal - 0x06060606;
 302                else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
 303                         TXHIGHPWRLEVEL_BT2)
 304                        writeVal = writeVal;
 305                *(p_outwriteval + rf) = writeVal;
 306        }
 307}
 308
 309static void _rtl92c_write_ofdm_power_reg(struct ieee80211_hw *hw,
 310                                         u8 index, u32 *pValue)
 311{
 312        struct rtl_priv *rtlpriv = rtl_priv(hw);
 313        struct rtl_phy *rtlphy = &(rtlpriv->phy);
 314        u16 regoffset_a[6] = {
 315                RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
 316                RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
 317                RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
 318        };
 319        u16 regoffset_b[6] = {
 320                RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
 321                RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
 322                RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
 323        };
 324        u8 i, rf, pwr_val[4];
 325        u32 writeVal;
 326        u16 regoffset;
 327
 328        for (rf = 0; rf < 2; rf++) {
 329                writeVal = pValue[rf];
 330                for (i = 0; i < 4; i++) {
 331                        pwr_val[i] = (u8)((writeVal & (0x7f << (i * 8))) >>
 332                                          (i * 8));
 333                        if (pwr_val[i] > RF6052_MAX_TX_PWR)
 334                                pwr_val[i] = RF6052_MAX_TX_PWR;
 335                }
 336                writeVal = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
 337                    (pwr_val[1] << 8) | pwr_val[0];
 338                if (rf == 0)
 339                        regoffset = regoffset_a[index];
 340                else
 341                        regoffset = regoffset_b[index];
 342                rtl_set_bbreg(hw, regoffset, MASKDWORD, writeVal);
 343                RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
 344                        "Set 0x%x = %08x\n", regoffset, writeVal);
 345                if (((get_rf_type(rtlphy) == RF_2T2R) &&
 346                     (regoffset == RTXAGC_A_MCS15_MCS12 ||
 347                      regoffset == RTXAGC_B_MCS15_MCS12)) ||
 348                    ((get_rf_type(rtlphy) != RF_2T2R) &&
 349                     (regoffset == RTXAGC_A_MCS07_MCS04 ||
 350                      regoffset == RTXAGC_B_MCS07_MCS04))) {
 351                        writeVal = pwr_val[3];
 352                        if (regoffset == RTXAGC_A_MCS15_MCS12 ||
 353                            regoffset == RTXAGC_A_MCS07_MCS04)
 354                                regoffset = 0xc90;
 355                        if (regoffset == RTXAGC_B_MCS15_MCS12 ||
 356                            regoffset == RTXAGC_B_MCS07_MCS04)
 357                                regoffset = 0xc98;
 358                        for (i = 0; i < 3; i++) {
 359                                if (i != 2)
 360                                        writeVal = (writeVal > 8) ?
 361                                                   (writeVal - 8) : 0;
 362                                else
 363                                        writeVal = (writeVal > 6) ?
 364                                                   (writeVal - 6) : 0;
 365                                rtl_write_byte(rtlpriv, (u32)(regoffset + i),
 366                                              (u8)writeVal);
 367                        }
 368                }
 369        }
 370}
 371
 372void rtl92cu_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
 373                                         u8 *ppowerlevel, u8 channel)
 374{
 375        u32 writeVal[2], powerBase0[2], powerBase1[2];
 376        u8 index = 0;
 377
 378        rtl92c_phy_get_power_base(hw, ppowerlevel,
 379                                  channel, &powerBase0[0], &powerBase1[0]);
 380        for (index = 0; index < 6; index++) {
 381                _rtl92c_get_txpower_writeval_by_regulatory(hw,
 382                                                           channel, index,
 383                                                           &powerBase0[0],
 384                                                           &powerBase1[0],
 385                                                           &writeVal[0]);
 386                _rtl92c_write_ofdm_power_reg(hw, index, &writeVal[0]);
 387        }
 388}
 389
 390bool rtl92cu_phy_rf6052_config(struct ieee80211_hw *hw)
 391{
 392        struct rtl_priv *rtlpriv = rtl_priv(hw);
 393        struct rtl_phy *rtlphy = &(rtlpriv->phy);
 394        bool rtstatus = true;
 395        u8 b_reg_hwparafile = 1;
 396
 397        if (rtlphy->rf_type == RF_1T1R)
 398                rtlphy->num_total_rfpath = 1;
 399        else
 400                rtlphy->num_total_rfpath = 2;
 401        if (b_reg_hwparafile == 1)
 402                rtstatus = _rtl92c_phy_rf6052_config_parafile(hw);
 403        return rtstatus;
 404}
 405
 406static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
 407{
 408        struct rtl_priv *rtlpriv = rtl_priv(hw);
 409        struct rtl_phy *rtlphy = &(rtlpriv->phy);
 410        u32 u4_regvalue = 0;
 411        u8 rfpath;
 412        bool rtstatus = true;
 413        struct bb_reg_def *pphyreg;
 414
 415        for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
 416                pphyreg = &rtlphy->phyreg_def[rfpath];
 417                switch (rfpath) {
 418                case RF90_PATH_A:
 419                case RF90_PATH_C:
 420                        u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
 421                                                    BRFSI_RFENV);
 422                        break;
 423                case RF90_PATH_B:
 424                case RF90_PATH_D:
 425                        u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
 426                                                    BRFSI_RFENV << 16);
 427                        break;
 428                }
 429                rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
 430                udelay(1);
 431                rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
 432                udelay(1);
 433                rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
 434                              B3WIREADDREAALENGTH, 0x0);
 435                udelay(1);
 436                rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
 437                udelay(1);
 438                switch (rfpath) {
 439                case RF90_PATH_A:
 440                case RF90_PATH_B:
 441                        rtstatus = rtl92cu_phy_config_rf_with_headerfile(hw,
 442                                        (enum radio_path) rfpath);
 443                        break;
 444                case RF90_PATH_C:
 445                        break;
 446                case RF90_PATH_D:
 447                        break;
 448                }
 449                switch (rfpath) {
 450                case RF90_PATH_A:
 451                case RF90_PATH_C:
 452                        rtl_set_bbreg(hw, pphyreg->rfintfs,
 453                                      BRFSI_RFENV, u4_regvalue);
 454                        break;
 455                case RF90_PATH_B:
 456                case RF90_PATH_D:
 457                        rtl_set_bbreg(hw, pphyreg->rfintfs,
 458                                      BRFSI_RFENV << 16, u4_regvalue);
 459                        break;
 460                }
 461                if (!rtstatus) {
 462                        RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
 463                                 "Radio[%d] Fail!!\n", rfpath);
 464                        goto phy_rf_cfg_fail;
 465                }
 466        }
 467        RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "<---\n");
 468phy_rf_cfg_fail:
 469        return rtstatus;
 470}
 471