linux/drivers/rapidio/rio-scan.c
<<
>>
Prefs
   1/*
   2 * RapidIO enumeration and discovery support
   3 *
   4 * Copyright 2005 MontaVista Software, Inc.
   5 * Matt Porter <mporter@kernel.crashing.org>
   6 *
   7 * Copyright 2009 Integrated Device Technology, Inc.
   8 * Alex Bounine <alexandre.bounine@idt.com>
   9 * - Added Port-Write/Error Management initialization and handling
  10 *
  11 * Copyright 2009 Sysgo AG
  12 * Thomas Moll <thomas.moll@sysgo.com>
  13 * - Added Input- Output- enable functionality, to allow full communication
  14 *
  15 * This program is free software; you can redistribute  it and/or modify it
  16 * under  the terms of  the GNU General  Public License as published by the
  17 * Free Software Foundation;  either version 2 of the  License, or (at your
  18 * option) any later version.
  19 */
  20
  21#include <linux/types.h>
  22#include <linux/kernel.h>
  23
  24#include <linux/delay.h>
  25#include <linux/dma-mapping.h>
  26#include <linux/init.h>
  27#include <linux/rio.h>
  28#include <linux/rio_drv.h>
  29#include <linux/rio_ids.h>
  30#include <linux/rio_regs.h>
  31#include <linux/module.h>
  32#include <linux/spinlock.h>
  33#include <linux/timer.h>
  34#include <linux/sched.h>
  35#include <linux/jiffies.h>
  36#include <linux/slab.h>
  37
  38#include "rio.h"
  39
  40static void rio_init_em(struct rio_dev *rdev);
  41
  42struct rio_id_table {
  43        u16 start;      /* logical minimal id */
  44        u32 max;        /* max number of IDs in table */
  45        spinlock_t lock;
  46        unsigned long table[0];
  47};
  48
  49static int next_destid = 0;
  50static int next_comptag = 1;
  51
  52/**
  53 * rio_destid_alloc - Allocate next available destID for given network
  54 * @net: RIO network
  55 *
  56 * Returns next available device destination ID for the specified RIO network.
  57 * Marks allocated ID as one in use.
  58 * Returns RIO_INVALID_DESTID if new destID is not available.
  59 */
  60static u16 rio_destid_alloc(struct rio_net *net)
  61{
  62        int destid;
  63        struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
  64
  65        spin_lock(&idtab->lock);
  66        destid = find_first_zero_bit(idtab->table, idtab->max);
  67
  68        if (destid < idtab->max) {
  69                set_bit(destid, idtab->table);
  70                destid += idtab->start;
  71        } else
  72                destid = RIO_INVALID_DESTID;
  73
  74        spin_unlock(&idtab->lock);
  75        return (u16)destid;
  76}
  77
  78/**
  79 * rio_destid_reserve - Reserve the specivied destID
  80 * @net: RIO network
  81 * @destid: destID to reserve
  82 *
  83 * Tries to reserve the specified destID.
  84 * Returns 0 if successful.
  85 */
  86static int rio_destid_reserve(struct rio_net *net, u16 destid)
  87{
  88        int oldbit;
  89        struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
  90
  91        destid -= idtab->start;
  92        spin_lock(&idtab->lock);
  93        oldbit = test_and_set_bit(destid, idtab->table);
  94        spin_unlock(&idtab->lock);
  95        return oldbit;
  96}
  97
  98/**
  99 * rio_destid_free - free a previously allocated destID
 100 * @net: RIO network
 101 * @destid: destID to free
 102 *
 103 * Makes the specified destID available for use.
 104 */
 105static void rio_destid_free(struct rio_net *net, u16 destid)
 106{
 107        struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
 108
 109        destid -= idtab->start;
 110        spin_lock(&idtab->lock);
 111        clear_bit(destid, idtab->table);
 112        spin_unlock(&idtab->lock);
 113}
 114
 115/**
 116 * rio_destid_first - return first destID in use
 117 * @net: RIO network
 118 */
 119static u16 rio_destid_first(struct rio_net *net)
 120{
 121        int destid;
 122        struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
 123
 124        spin_lock(&idtab->lock);
 125        destid = find_first_bit(idtab->table, idtab->max);
 126        if (destid >= idtab->max)
 127                destid = RIO_INVALID_DESTID;
 128        else
 129                destid += idtab->start;
 130        spin_unlock(&idtab->lock);
 131        return (u16)destid;
 132}
 133
 134/**
 135 * rio_destid_next - return next destID in use
 136 * @net: RIO network
 137 * @from: destination ID from which search shall continue
 138 */
 139static u16 rio_destid_next(struct rio_net *net, u16 from)
 140{
 141        int destid;
 142        struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
 143
 144        spin_lock(&idtab->lock);
 145        destid = find_next_bit(idtab->table, idtab->max, from);
 146        if (destid >= idtab->max)
 147                destid = RIO_INVALID_DESTID;
 148        else
 149                destid += idtab->start;
 150        spin_unlock(&idtab->lock);
 151        return (u16)destid;
 152}
 153
 154/**
 155 * rio_get_device_id - Get the base/extended device id for a device
 156 * @port: RIO master port
 157 * @destid: Destination ID of device
 158 * @hopcount: Hopcount to device
 159 *
 160 * Reads the base/extended device id from a device. Returns the
 161 * 8/16-bit device ID.
 162 */
 163static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
 164{
 165        u32 result;
 166
 167        rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
 168
 169        return RIO_GET_DID(port->sys_size, result);
 170}
 171
 172/**
 173 * rio_set_device_id - Set the base/extended device id for a device
 174 * @port: RIO master port
 175 * @destid: Destination ID of device
 176 * @hopcount: Hopcount to device
 177 * @did: Device ID value to be written
 178 *
 179 * Writes the base/extended device id from a device.
 180 */
 181static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
 182{
 183        rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
 184                                  RIO_SET_DID(port->sys_size, did));
 185}
 186
 187/**
 188 * rio_clear_locks- Release all host locks and signal enumeration complete
 189 * @net: RIO network to run on
 190 *
 191 * Marks the component tag CSR on each device with the enumeration
 192 * complete flag. When complete, it then release the host locks on
 193 * each device. Returns 0 on success or %-EINVAL on failure.
 194 */
 195static int rio_clear_locks(struct rio_net *net)
 196{
 197        struct rio_mport *port = net->hport;
 198        struct rio_dev *rdev;
 199        u32 result;
 200        int ret = 0;
 201
 202        /* Release host device id locks */
 203        rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
 204                                  port->host_deviceid);
 205        rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
 206        if ((result & 0xffff) != 0xffff) {
 207                printk(KERN_INFO
 208                       "RIO: badness when releasing host lock on master port, result %8.8x\n",
 209                       result);
 210                ret = -EINVAL;
 211        }
 212        list_for_each_entry(rdev, &net->devices, net_list) {
 213                rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR,
 214                                    port->host_deviceid);
 215                rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result);
 216                if ((result & 0xffff) != 0xffff) {
 217                        printk(KERN_INFO
 218                               "RIO: badness when releasing host lock on vid %4.4x did %4.4x\n",
 219                               rdev->vid, rdev->did);
 220                        ret = -EINVAL;
 221                }
 222
 223                /* Mark device as discovered and enable master */
 224                rio_read_config_32(rdev,
 225                                   rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
 226                                   &result);
 227                result |= RIO_PORT_GEN_DISCOVERED | RIO_PORT_GEN_MASTER;
 228                rio_write_config_32(rdev,
 229                                    rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
 230                                    result);
 231        }
 232
 233        return ret;
 234}
 235
 236/**
 237 * rio_enum_host- Set host lock and initialize host destination ID
 238 * @port: Master port to issue transaction
 239 *
 240 * Sets the local host master port lock and destination ID register
 241 * with the host device ID value. The host device ID value is provided
 242 * by the platform. Returns %0 on success or %-1 on failure.
 243 */
 244static int rio_enum_host(struct rio_mport *port)
 245{
 246        u32 result;
 247
 248        /* Set master port host device id lock */
 249        rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
 250                                  port->host_deviceid);
 251
 252        rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
 253        if ((result & 0xffff) != port->host_deviceid)
 254                return -1;
 255
 256        /* Set master port destid and init destid ctr */
 257        rio_local_set_device_id(port, port->host_deviceid);
 258        return 0;
 259}
 260
 261/**
 262 * rio_device_has_destid- Test if a device contains a destination ID register
 263 * @port: Master port to issue transaction
 264 * @src_ops: RIO device source operations
 265 * @dst_ops: RIO device destination operations
 266 *
 267 * Checks the provided @src_ops and @dst_ops for the necessary transaction
 268 * capabilities that indicate whether or not a device will implement a
 269 * destination ID register. Returns 1 if true or 0 if false.
 270 */
 271static int rio_device_has_destid(struct rio_mport *port, int src_ops,
 272                                 int dst_ops)
 273{
 274        u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR;
 275
 276        return !!((src_ops | dst_ops) & mask);
 277}
 278
 279/**
 280 * rio_release_dev- Frees a RIO device struct
 281 * @dev: LDM device associated with a RIO device struct
 282 *
 283 * Gets the RIO device struct associated a RIO device struct.
 284 * The RIO device struct is freed.
 285 */
 286static void rio_release_dev(struct device *dev)
 287{
 288        struct rio_dev *rdev;
 289
 290        rdev = to_rio_dev(dev);
 291        kfree(rdev);
 292}
 293
 294/**
 295 * rio_is_switch- Tests if a RIO device has switch capabilities
 296 * @rdev: RIO device
 297 *
 298 * Gets the RIO device Processing Element Features register
 299 * contents and tests for switch capabilities. Returns 1 if
 300 * the device is a switch or 0 if it is not a switch.
 301 * The RIO device struct is freed.
 302 */
 303static int rio_is_switch(struct rio_dev *rdev)
 304{
 305        if (rdev->pef & RIO_PEF_SWITCH)
 306                return 1;
 307        return 0;
 308}
 309
 310/**
 311 * rio_setup_device- Allocates and sets up a RIO device
 312 * @net: RIO network
 313 * @port: Master port to send transactions
 314 * @destid: Current destination ID
 315 * @hopcount: Current hopcount
 316 * @do_enum: Enumeration/Discovery mode flag
 317 *
 318 * Allocates a RIO device and configures fields based on configuration
 319 * space contents. If device has a destination ID register, a destination
 320 * ID is either assigned in enumeration mode or read from configuration
 321 * space in discovery mode.  If the device has switch capabilities, then
 322 * a switch is allocated and configured appropriately. Returns a pointer
 323 * to a RIO device on success or NULL on failure.
 324 *
 325 */
 326static struct rio_dev *rio_setup_device(struct rio_net *net,
 327                                        struct rio_mport *port, u16 destid,
 328                                        u8 hopcount, int do_enum)
 329{
 330        int ret = 0;
 331        struct rio_dev *rdev;
 332        struct rio_switch *rswitch = NULL;
 333        int result, rdid;
 334        size_t size;
 335        u32 swpinfo = 0;
 336
 337        size = sizeof(struct rio_dev);
 338        if (rio_mport_read_config_32(port, destid, hopcount,
 339                                     RIO_PEF_CAR, &result))
 340                return NULL;
 341
 342        if (result & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
 343                rio_mport_read_config_32(port, destid, hopcount,
 344                                         RIO_SWP_INFO_CAR, &swpinfo);
 345                if (result & RIO_PEF_SWITCH) {
 346                        size += (RIO_GET_TOTAL_PORTS(swpinfo) *
 347                                sizeof(rswitch->nextdev[0])) + sizeof(*rswitch);
 348                }
 349        }
 350
 351        rdev = kzalloc(size, GFP_KERNEL);
 352        if (!rdev)
 353                return NULL;
 354
 355        rdev->net = net;
 356        rdev->pef = result;
 357        rdev->swpinfo = swpinfo;
 358        rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,
 359                                 &result);
 360        rdev->did = result >> 16;
 361        rdev->vid = result & 0xffff;
 362        rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR,
 363                                 &rdev->device_rev);
 364        rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR,
 365                                 &result);
 366        rdev->asm_did = result >> 16;
 367        rdev->asm_vid = result & 0xffff;
 368        rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR,
 369                                 &result);
 370        rdev->asm_rev = result >> 16;
 371        if (rdev->pef & RIO_PEF_EXT_FEATURES) {
 372                rdev->efptr = result & 0xffff;
 373                rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
 374                                                hopcount, &rdev->phys_rmap);
 375                pr_debug("RIO: %s Register Map %d device\n",
 376                         __func__, rdev->phys_rmap);
 377
 378                rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
 379                                                hopcount, RIO_EFB_ERR_MGMNT);
 380                if (!rdev->em_efptr)
 381                        rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
 382                                                hopcount, RIO_EFB_ERR_MGMNT_HS);
 383        }
 384
 385        rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
 386                                 &rdev->src_ops);
 387        rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
 388                                 &rdev->dst_ops);
 389
 390        if (do_enum) {
 391                /* Assign component tag to device */
 392                if (next_comptag >= 0x10000) {
 393                        pr_err("RIO: Component Tag Counter Overflow\n");
 394                        goto cleanup;
 395                }
 396                rio_mport_write_config_32(port, destid, hopcount,
 397                                          RIO_COMPONENT_TAG_CSR, next_comptag);
 398                rdev->comp_tag = next_comptag++;
 399                rdev->do_enum = true;
 400        }  else {
 401                rio_mport_read_config_32(port, destid, hopcount,
 402                                         RIO_COMPONENT_TAG_CSR,
 403                                         &rdev->comp_tag);
 404        }
 405
 406        if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) {
 407                if (do_enum) {
 408                        rio_set_device_id(port, destid, hopcount, next_destid);
 409                        rdev->destid = next_destid;
 410                        next_destid = rio_destid_alloc(net);
 411                } else
 412                        rdev->destid = rio_get_device_id(port, destid, hopcount);
 413
 414                rdev->hopcount = 0xff;
 415        } else {
 416                /* Switch device has an associated destID which
 417                 * will be adjusted later
 418                 */
 419                rdev->destid = destid;
 420                rdev->hopcount = hopcount;
 421        }
 422
 423        /* If a PE has both switch and other functions, show it as a switch */
 424        if (rio_is_switch(rdev)) {
 425                rswitch = rdev->rswitch;
 426                rswitch->port_ok = 0;
 427                spin_lock_init(&rswitch->lock);
 428                rswitch->route_table = kzalloc(sizeof(u8)*
 429                                        RIO_MAX_ROUTE_ENTRIES(port->sys_size),
 430                                        GFP_KERNEL);
 431                if (!rswitch->route_table)
 432                        goto cleanup;
 433                /* Initialize switch route table */
 434                for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
 435                                rdid++)
 436                        rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
 437                dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
 438                             rdev->comp_tag & RIO_CTAG_UDEVID);
 439
 440                if (do_enum)
 441                        rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
 442        } else {
 443                if (do_enum)
 444                        /*Enable Input Output Port (transmitter receiver)*/
 445                        rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
 446
 447                dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
 448                             rdev->comp_tag & RIO_CTAG_UDEVID);
 449        }
 450
 451        rdev->dev.parent = &net->dev;
 452        rio_attach_device(rdev);
 453        rdev->dev.release = rio_release_dev;
 454        rdev->dma_mask = DMA_BIT_MASK(32);
 455        rdev->dev.dma_mask = &rdev->dma_mask;
 456        rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 457
 458        if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
 459                rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
 460                                   0, 0xffff);
 461
 462        ret = rio_add_device(rdev);
 463        if (ret)
 464                goto cleanup;
 465
 466        rio_dev_get(rdev);
 467
 468        return rdev;
 469
 470cleanup:
 471        if (rswitch)
 472                kfree(rswitch->route_table);
 473
 474        kfree(rdev);
 475        return NULL;
 476}
 477
 478/**
 479 * rio_sport_is_active- Tests if a switch port has an active connection.
 480 * @rdev: RapidIO device object
 481 * @sp: Switch port number
 482 *
 483 * Reads the port error status CSR for a particular switch port to
 484 * determine if the port has an active link.  Returns
 485 * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
 486 * inactive.
 487 */
 488static int
 489rio_sport_is_active(struct rio_dev *rdev, int sp)
 490{
 491        u32 result = 0;
 492
 493        rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp),
 494                           &result);
 495
 496        return result & RIO_PORT_N_ERR_STS_PORT_OK;
 497}
 498
 499/**
 500 * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device
 501 * @port: Master port to send transaction
 502 * @hopcount: Number of hops to the device
 503 *
 504 * Used during enumeration to read the Host Device ID Lock CSR on a
 505 * RIO device. Returns the value of the lock register.
 506 */
 507static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
 508{
 509        u32 result;
 510
 511        rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
 512                                 RIO_HOST_DID_LOCK_CSR, &result);
 513
 514        return (u16) (result & 0xffff);
 515}
 516
 517/**
 518 * rio_enum_peer- Recursively enumerate a RIO network through a master port
 519 * @net: RIO network being enumerated
 520 * @port: Master port to send transactions
 521 * @hopcount: Number of hops into the network
 522 * @prev: Previous RIO device connected to the enumerated one
 523 * @prev_port: Port on previous RIO device
 524 *
 525 * Recursively enumerates a RIO network.  Transactions are sent via the
 526 * master port passed in @port.
 527 */
 528static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 529                         u8 hopcount, struct rio_dev *prev, int prev_port)
 530{
 531        struct rio_dev *rdev;
 532        u32 regval;
 533        int tmp;
 534
 535        if (rio_mport_chk_dev_access(port,
 536                        RIO_ANY_DESTID(port->sys_size), hopcount)) {
 537                pr_debug("RIO: device access check failed\n");
 538                return -1;
 539        }
 540
 541        if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) {
 542                pr_debug("RIO: PE already discovered by this host\n");
 543                /*
 544                 * Already discovered by this host. Add it as another
 545                 * link to the existing device.
 546                 */
 547                rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size),
 548                                hopcount, RIO_COMPONENT_TAG_CSR, &regval);
 549
 550                if (regval) {
 551                        rdev = rio_get_comptag((regval & 0xffff), NULL);
 552
 553                        if (rdev && prev && rio_is_switch(prev)) {
 554                                pr_debug("RIO: redundant path to %s\n",
 555                                         rio_name(rdev));
 556                                prev->rswitch->nextdev[prev_port] = rdev;
 557                        }
 558                }
 559
 560                return 0;
 561        }
 562
 563        /* Attempt to acquire device lock */
 564        rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
 565                                  hopcount,
 566                                  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
 567        while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
 568               < port->host_deviceid) {
 569                /* Delay a bit */
 570                mdelay(1);
 571                /* Attempt to acquire device lock again */
 572                rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
 573                                          hopcount,
 574                                          RIO_HOST_DID_LOCK_CSR,
 575                                          port->host_deviceid);
 576        }
 577
 578        if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) {
 579                pr_debug(
 580                    "RIO: PE locked by a higher priority host...retreating\n");
 581                return -1;
 582        }
 583
 584        /* Setup new RIO device */
 585        rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
 586                                        hopcount, 1);
 587        if (rdev) {
 588                rdev->prev = prev;
 589                if (prev && rio_is_switch(prev))
 590                        prev->rswitch->nextdev[prev_port] = rdev;
 591        } else
 592                return -1;
 593
 594        if (rio_is_switch(rdev)) {
 595                int sw_destid;
 596                int cur_destid;
 597                int sw_inport;
 598                u16 destid;
 599                int port_num;
 600
 601                sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
 602                rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
 603                                    port->host_deviceid, sw_inport, 0);
 604                rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
 605
 606                destid = rio_destid_first(net);
 607                while (destid != RIO_INVALID_DESTID && destid < next_destid) {
 608                        if (destid != port->host_deviceid) {
 609                                rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
 610                                                    destid, sw_inport, 0);
 611                                rdev->rswitch->route_table[destid] = sw_inport;
 612                        }
 613                        destid = rio_destid_next(net, destid + 1);
 614                }
 615                pr_debug(
 616                    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
 617                    rio_name(rdev), rdev->vid, rdev->did,
 618                    RIO_GET_TOTAL_PORTS(rdev->swpinfo));
 619                sw_destid = next_destid;
 620                for (port_num = 0;
 621                     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
 622                     port_num++) {
 623                        if (sw_inport == port_num) {
 624                                rio_enable_rx_tx_port(port, 0,
 625                                              RIO_ANY_DESTID(port->sys_size),
 626                                              hopcount, port_num);
 627                                rdev->rswitch->port_ok |= (1 << port_num);
 628                                continue;
 629                        }
 630
 631                        cur_destid = next_destid;
 632
 633                        if (rio_sport_is_active(rdev, port_num)) {
 634                                pr_debug(
 635                                    "RIO: scanning device on port %d\n",
 636                                    port_num);
 637                                rio_enable_rx_tx_port(port, 0,
 638                                              RIO_ANY_DESTID(port->sys_size),
 639                                              hopcount, port_num);
 640                                rdev->rswitch->port_ok |= (1 << port_num);
 641                                rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
 642                                                RIO_ANY_DESTID(port->sys_size),
 643                                                port_num, 0);
 644
 645                                if (rio_enum_peer(net, port, hopcount + 1,
 646                                                  rdev, port_num) < 0)
 647                                        return -1;
 648
 649                                /* Update routing tables */
 650                                destid = rio_destid_next(net, cur_destid + 1);
 651                                if (destid != RIO_INVALID_DESTID) {
 652                                        for (destid = cur_destid;
 653                                             destid < next_destid;) {
 654                                                if (destid != port->host_deviceid) {
 655                                                        rio_route_add_entry(rdev,
 656                                                                    RIO_GLOBAL_TABLE,
 657                                                                    destid,
 658                                                                    port_num,
 659                                                                    0);
 660                                                        rdev->rswitch->
 661                                                                route_table[destid] =
 662                                                                port_num;
 663                                                }
 664                                                destid = rio_destid_next(net,
 665                                                                destid + 1);
 666                                        }
 667                                }
 668                        } else {
 669                                /* If switch supports Error Management,
 670                                 * set PORT_LOCKOUT bit for unused port
 671                                 */
 672                                if (rdev->em_efptr)
 673                                        rio_set_port_lockout(rdev, port_num, 1);
 674
 675                                rdev->rswitch->port_ok &= ~(1 << port_num);
 676                        }
 677                }
 678
 679                /* Direct Port-write messages to the enumeratiing host */
 680                if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
 681                    (rdev->em_efptr)) {
 682                        rio_write_config_32(rdev,
 683                                        rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
 684                                        (port->host_deviceid << 16) |
 685                                        (port->sys_size << 15));
 686                }
 687
 688                rio_init_em(rdev);
 689
 690                /* Check for empty switch */
 691                if (next_destid == sw_destid)
 692                        next_destid = rio_destid_alloc(net);
 693
 694                rdev->destid = sw_destid;
 695        } else
 696                pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
 697                    rio_name(rdev), rdev->vid, rdev->did);
 698
 699        return 0;
 700}
 701
 702/**
 703 * rio_enum_complete- Tests if enumeration of a network is complete
 704 * @port: Master port to send transaction
 705 *
 706 * Tests the PGCCSR discovered bit for non-zero value (enumeration
 707 * complete flag). Return %1 if enumeration is complete or %0 if
 708 * enumeration is incomplete.
 709 */
 710static int rio_enum_complete(struct rio_mport *port)
 711{
 712        u32 regval;
 713
 714        rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,
 715                                 &regval);
 716        return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;
 717}
 718
 719/**
 720 * rio_disc_peer- Recursively discovers a RIO network through a master port
 721 * @net: RIO network being discovered
 722 * @port: Master port to send transactions
 723 * @destid: Current destination ID in network
 724 * @hopcount: Number of hops into the network
 725 * @prev: previous rio_dev
 726 * @prev_port: previous port number
 727 *
 728 * Recursively discovers a RIO network.  Transactions are sent via the
 729 * master port passed in @port.
 730 */
 731static int
 732rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 733              u8 hopcount, struct rio_dev *prev, int prev_port)
 734{
 735        u8 port_num, route_port;
 736        struct rio_dev *rdev;
 737        u16 ndestid;
 738
 739        /* Setup new RIO device */
 740        if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) {
 741                rdev->prev = prev;
 742                if (prev && rio_is_switch(prev))
 743                        prev->rswitch->nextdev[prev_port] = rdev;
 744        } else
 745                return -1;
 746
 747        if (rio_is_switch(rdev)) {
 748                /* Associated destid is how we accessed this switch */
 749                rdev->destid = destid;
 750
 751                pr_debug(
 752                    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
 753                    rio_name(rdev), rdev->vid, rdev->did,
 754                    RIO_GET_TOTAL_PORTS(rdev->swpinfo));
 755                for (port_num = 0;
 756                     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
 757                     port_num++) {
 758                        if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
 759                                continue;
 760
 761                        if (rio_sport_is_active(rdev, port_num)) {
 762                                pr_debug(
 763                                    "RIO: scanning device on port %d\n",
 764                                    port_num);
 765
 766                                rio_lock_device(port, destid, hopcount, 1000);
 767
 768                                for (ndestid = 0;
 769                                     ndestid < RIO_ANY_DESTID(port->sys_size);
 770                                     ndestid++) {
 771                                        rio_route_get_entry(rdev,
 772                                                            RIO_GLOBAL_TABLE,
 773                                                            ndestid,
 774                                                            &route_port, 0);
 775                                        if (route_port == port_num)
 776                                                break;
 777                                }
 778
 779                                if (ndestid == RIO_ANY_DESTID(port->sys_size))
 780                                        continue;
 781                                rio_unlock_device(port, destid, hopcount);
 782                                if (rio_disc_peer(net, port, ndestid,
 783                                        hopcount + 1, rdev, port_num) < 0)
 784                                        return -1;
 785                        }
 786                }
 787        } else
 788                pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
 789                    rio_name(rdev), rdev->vid, rdev->did);
 790
 791        return 0;
 792}
 793
 794/**
 795 * rio_mport_is_active- Tests if master port link is active
 796 * @port: Master port to test
 797 *
 798 * Reads the port error status CSR for the master port to
 799 * determine if the port has an active link.  Returns
 800 * %RIO_PORT_N_ERR_STS_PORT_OK if the  master port is active
 801 * or %0 if it is inactive.
 802 */
 803static int rio_mport_is_active(struct rio_mport *port)
 804{
 805        u32 result = 0;
 806
 807        rio_local_read_config_32(port,
 808                port->phys_efptr +
 809                        RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap),
 810                &result);
 811        return result & RIO_PORT_N_ERR_STS_PORT_OK;
 812}
 813
 814static void rio_scan_release_net(struct rio_net *net)
 815{
 816        pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);
 817        kfree(net->enum_data);
 818}
 819
 820static void rio_scan_release_dev(struct device *dev)
 821{
 822        struct rio_net *net;
 823
 824        net = to_rio_net(dev);
 825        pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);
 826        kfree(net);
 827}
 828
 829/*
 830 * rio_scan_alloc_net - Allocate and configure a new RIO network
 831 * @mport: Master port associated with the RIO network
 832 * @do_enum: Enumeration/Discovery mode flag
 833 * @start: logical minimal start id for new net
 834 *
 835 * Allocates a new RIO network structure and initializes enumerator-specific
 836 * part of it (if required).
 837 * Returns a RIO network pointer on success or %NULL on failure.
 838 */
 839static struct rio_net *rio_scan_alloc_net(struct rio_mport *mport,
 840                                          int do_enum, u16 start)
 841{
 842        struct rio_net *net;
 843
 844        net = rio_alloc_net(mport);
 845
 846        if (net && do_enum) {
 847                struct rio_id_table *idtab;
 848                size_t size;
 849
 850                size = sizeof(struct rio_id_table) +
 851                                BITS_TO_LONGS(
 852                                        RIO_MAX_ROUTE_ENTRIES(mport->sys_size)
 853                                        ) * sizeof(long);
 854
 855                idtab = kzalloc(size, GFP_KERNEL);
 856
 857                if (idtab == NULL) {
 858                        pr_err("RIO: failed to allocate destID table\n");
 859                        rio_free_net(net);
 860                        net = NULL;
 861                } else {
 862                        net->enum_data = idtab;
 863                        net->release = rio_scan_release_net;
 864                        idtab->start = start;
 865                        idtab->max = RIO_MAX_ROUTE_ENTRIES(mport->sys_size);
 866                        spin_lock_init(&idtab->lock);
 867                }
 868        }
 869
 870        if (net) {
 871                net->id = mport->id;
 872                net->hport = mport;
 873                dev_set_name(&net->dev, "rnet_%d", net->id);
 874                net->dev.parent = &mport->dev;
 875                net->dev.release = rio_scan_release_dev;
 876                rio_add_net(net);
 877        }
 878
 879        return net;
 880}
 881
 882/**
 883 * rio_update_route_tables- Updates route tables in switches
 884 * @net: RIO network to run update on
 885 *
 886 * For each enumerated device, ensure that each switch in a system
 887 * has correct routing entries. Add routes for devices that where
 888 * unknown dirung the first enumeration pass through the switch.
 889 */
 890static void rio_update_route_tables(struct rio_net *net)
 891{
 892        struct rio_dev *rdev, *swrdev;
 893        struct rio_switch *rswitch;
 894        u8 sport;
 895        u16 destid;
 896
 897        list_for_each_entry(rdev, &net->devices, net_list) {
 898
 899                destid = rdev->destid;
 900
 901                list_for_each_entry(rswitch, &net->switches, node) {
 902
 903                        if (rio_is_switch(rdev) && (rdev->rswitch == rswitch))
 904                                continue;
 905
 906                        if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
 907                                swrdev = sw_to_rio_dev(rswitch);
 908
 909                                /* Skip if destid ends in empty switch*/
 910                                if (swrdev->destid == destid)
 911                                        continue;
 912
 913                                sport = RIO_GET_PORT_NUM(swrdev->swpinfo);
 914
 915                                rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE,
 916                                                    destid, sport, 0);
 917                                rswitch->route_table[destid] = sport;
 918                        }
 919                }
 920        }
 921}
 922
 923/**
 924 * rio_init_em - Initializes RIO Error Management (for switches)
 925 * @rdev: RIO device
 926 *
 927 * For each enumerated switch, call device-specific error management
 928 * initialization routine (if supplied by the switch driver).
 929 */
 930static void rio_init_em(struct rio_dev *rdev)
 931{
 932        if (rio_is_switch(rdev) && (rdev->em_efptr) &&
 933            rdev->rswitch->ops && rdev->rswitch->ops->em_init) {
 934                rdev->rswitch->ops->em_init(rdev);
 935        }
 936}
 937
 938/**
 939 * rio_enum_mport- Start enumeration through a master port
 940 * @mport: Master port to send transactions
 941 * @flags: Enumeration control flags
 942 *
 943 * Starts the enumeration process. If somebody has enumerated our
 944 * master port device, then give up. If not and we have an active
 945 * link, then start recursive peer enumeration. Returns %0 if
 946 * enumeration succeeds or %-EBUSY if enumeration fails.
 947 */
 948static int rio_enum_mport(struct rio_mport *mport, u32 flags)
 949{
 950        struct rio_net *net = NULL;
 951        int rc = 0;
 952
 953        printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
 954               mport->name);
 955
 956        /*
 957         * To avoid multiple start requests (repeat enumeration is not supported
 958         * by this method) check if enumeration/discovery was performed for this
 959         * mport: if mport was added into the list of mports for a net exit
 960         * with error.
 961         */
 962        if (mport->nnode.next || mport->nnode.prev)
 963                return -EBUSY;
 964
 965        /* If somebody else enumerated our master port device, bail. */
 966        if (rio_enum_host(mport) < 0) {
 967                printk(KERN_INFO
 968                       "RIO: master port %d device has been enumerated by a remote host\n",
 969                       mport->id);
 970                rc = -EBUSY;
 971                goto out;
 972        }
 973
 974        /* If master port has an active link, allocate net and enum peers */
 975        if (rio_mport_is_active(mport)) {
 976                net = rio_scan_alloc_net(mport, 1, 0);
 977                if (!net) {
 978                        printk(KERN_ERR "RIO: failed to allocate new net\n");
 979                        rc = -ENOMEM;
 980                        goto out;
 981                }
 982
 983                /* reserve mport destID in new net */
 984                rio_destid_reserve(net, mport->host_deviceid);
 985
 986                /* Enable Input Output Port (transmitter reviever) */
 987                rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
 988
 989                /* Set component tag for host */
 990                rio_local_write_config_32(mport, RIO_COMPONENT_TAG_CSR,
 991                                          next_comptag++);
 992
 993                next_destid = rio_destid_alloc(net);
 994
 995                if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) {
 996                        /* A higher priority host won enumeration, bail. */
 997                        printk(KERN_INFO
 998                               "RIO: master port %d device has lost enumeration to a remote host\n",
 999                               mport->id);
1000                        rio_clear_locks(net);
1001                        rc = -EBUSY;
1002                        goto out;
1003                }
1004                /* free the last allocated destID (unused) */
1005                rio_destid_free(net, next_destid);
1006                rio_update_route_tables(net);
1007                rio_clear_locks(net);
1008                rio_pw_enable(mport, 1);
1009        } else {
1010                printk(KERN_INFO "RIO: master port %d link inactive\n",
1011                       mport->id);
1012                rc = -EINVAL;
1013        }
1014
1015      out:
1016        return rc;
1017}
1018
1019/**
1020 * rio_build_route_tables- Generate route tables from switch route entries
1021 * @net: RIO network to run route tables scan on
1022 *
1023 * For each switch device, generate a route table by copying existing
1024 * route entries from the switch.
1025 */
1026static void rio_build_route_tables(struct rio_net *net)
1027{
1028        struct rio_switch *rswitch;
1029        struct rio_dev *rdev;
1030        int i;
1031        u8 sport;
1032
1033        list_for_each_entry(rswitch, &net->switches, node) {
1034                rdev = sw_to_rio_dev(rswitch);
1035
1036                rio_lock_device(net->hport, rdev->destid,
1037                                rdev->hopcount, 1000);
1038                for (i = 0;
1039                     i < RIO_MAX_ROUTE_ENTRIES(net->hport->sys_size);
1040                     i++) {
1041                        if (rio_route_get_entry(rdev, RIO_GLOBAL_TABLE,
1042                                                i, &sport, 0) < 0)
1043                                continue;
1044                        rswitch->route_table[i] = sport;
1045                }
1046
1047                rio_unlock_device(net->hport, rdev->destid, rdev->hopcount);
1048        }
1049}
1050
1051/**
1052 * rio_disc_mport- Start discovery through a master port
1053 * @mport: Master port to send transactions
1054 * @flags: discovery control flags
1055 *
1056 * Starts the discovery process. If we have an active link,
1057 * then wait for the signal that enumeration is complete (if wait
1058 * is allowed).
1059 * When enumeration completion is signaled, start recursive
1060 * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
1061 * on failure.
1062 */
1063static int rio_disc_mport(struct rio_mport *mport, u32 flags)
1064{
1065        struct rio_net *net = NULL;
1066        unsigned long to_end;
1067
1068        printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,
1069               mport->name);
1070
1071        /* If master port has an active link, allocate net and discover peers */
1072        if (rio_mport_is_active(mport)) {
1073                if (rio_enum_complete(mport))
1074                        goto enum_done;
1075                else if (flags & RIO_SCAN_ENUM_NO_WAIT)
1076                        return -EAGAIN;
1077
1078                pr_debug("RIO: wait for enumeration to complete...\n");
1079
1080                to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
1081                while (time_before(jiffies, to_end)) {
1082                        if (rio_enum_complete(mport))
1083                                goto enum_done;
1084                        msleep(10);
1085                }
1086
1087                pr_debug("RIO: discovery timeout on mport %d %s\n",
1088                         mport->id, mport->name);
1089                goto bail;
1090enum_done:
1091                pr_debug("RIO: ... enumeration done\n");
1092
1093                net = rio_scan_alloc_net(mport, 0, 0);
1094                if (!net) {
1095                        printk(KERN_ERR "RIO: Failed to allocate new net\n");
1096                        goto bail;
1097                }
1098
1099                /* Read DestID assigned by enumerator */
1100                rio_local_read_config_32(mport, RIO_DID_CSR,
1101                                         &mport->host_deviceid);
1102                mport->host_deviceid = RIO_GET_DID(mport->sys_size,
1103                                                   mport->host_deviceid);
1104
1105                if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
1106                                        0, NULL, 0) < 0) {
1107                        printk(KERN_INFO
1108                               "RIO: master port %d device has failed discovery\n",
1109                               mport->id);
1110                        goto bail;
1111                }
1112
1113                rio_build_route_tables(net);
1114        }
1115
1116        return 0;
1117bail:
1118        return -EBUSY;
1119}
1120
1121static struct rio_scan rio_scan_ops = {
1122        .owner = THIS_MODULE,
1123        .enumerate = rio_enum_mport,
1124        .discover = rio_disc_mport,
1125};
1126
1127static bool scan;
1128module_param(scan, bool, 0);
1129MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
1130                        "(default = 0)");
1131
1132/**
1133 * rio_basic_attach:
1134 *
1135 * When this enumeration/discovery method is loaded as a module this function
1136 * registers its specific enumeration and discover routines for all available
1137 * RapidIO mport devices. The "scan" command line parameter controls ability of
1138 * the module to start RapidIO enumeration/discovery automatically.
1139 *
1140 * Returns 0 for success or -EIO if unable to register itself.
1141 *
1142 * This enumeration/discovery method cannot be unloaded and therefore does not
1143 * provide a matching cleanup_module routine.
1144 */
1145
1146static int __init rio_basic_attach(void)
1147{
1148        if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
1149                return -EIO;
1150        if (scan)
1151                rio_init_mports();
1152        return 0;
1153}
1154
1155late_initcall(rio_basic_attach);
1156
1157MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
1158MODULE_LICENSE("GPL");
1159