linux/drivers/scsi/qla4xxx/ql4_mbx.c
<<
>>
Prefs
   1/*
   2 * QLogic iSCSI HBA Driver
   3 * Copyright (c)  2003-2013 QLogic Corporation
   4 *
   5 * See LICENSE.qla4xxx for copyright and licensing details.
   6 */
   7
   8#include <linux/ctype.h>
   9#include "ql4_def.h"
  10#include "ql4_glbl.h"
  11#include "ql4_dbg.h"
  12#include "ql4_inline.h"
  13#include "ql4_version.h"
  14
  15void qla4xxx_queue_mbox_cmd(struct scsi_qla_host *ha, uint32_t *mbx_cmd,
  16                            int in_count)
  17{
  18        int i;
  19
  20        /* Load all mailbox registers, except mailbox 0. */
  21        for (i = 1; i < in_count; i++)
  22                writel(mbx_cmd[i], &ha->reg->mailbox[i]);
  23
  24        /* Wakeup firmware  */
  25        writel(mbx_cmd[0], &ha->reg->mailbox[0]);
  26        readl(&ha->reg->mailbox[0]);
  27        writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status);
  28        readl(&ha->reg->ctrl_status);
  29}
  30
  31void qla4xxx_process_mbox_intr(struct scsi_qla_host *ha, int out_count)
  32{
  33        int intr_status;
  34
  35        intr_status = readl(&ha->reg->ctrl_status);
  36        if (intr_status & INTR_PENDING) {
  37                /*
  38                 * Service the interrupt.
  39                 * The ISR will save the mailbox status registers
  40                 * to a temporary storage location in the adapter structure.
  41                 */
  42                ha->mbox_status_count = out_count;
  43                ha->isp_ops->interrupt_service_routine(ha, intr_status);
  44        }
  45}
  46
  47/**
  48 * qla4xxx_is_intr_poll_mode – Are we allowed to poll for interrupts?
  49 * @ha: Pointer to host adapter structure.
  50 * @ret: 1=polling mode, 0=non-polling mode
  51 **/
  52static int qla4xxx_is_intr_poll_mode(struct scsi_qla_host *ha)
  53{
  54        int rval = 1;
  55
  56        if (is_qla8032(ha) || is_qla8042(ha)) {
  57                if (test_bit(AF_IRQ_ATTACHED, &ha->flags) &&
  58                    test_bit(AF_83XX_MBOX_INTR_ON, &ha->flags))
  59                        rval = 0;
  60        } else {
  61                if (test_bit(AF_IRQ_ATTACHED, &ha->flags) &&
  62                    test_bit(AF_INTERRUPTS_ON, &ha->flags) &&
  63                    test_bit(AF_ONLINE, &ha->flags) &&
  64                    !test_bit(AF_HA_REMOVAL, &ha->flags))
  65                        rval = 0;
  66        }
  67
  68        return rval;
  69}
  70
  71/**
  72 * qla4xxx_mailbox_command - issues mailbox commands
  73 * @ha: Pointer to host adapter structure.
  74 * @inCount: number of mailbox registers to load.
  75 * @outCount: number of mailbox registers to return.
  76 * @mbx_cmd: data pointer for mailbox in registers.
  77 * @mbx_sts: data pointer for mailbox out registers.
  78 *
  79 * This routine issue mailbox commands and waits for completion.
  80 * If outCount is 0, this routine completes successfully WITHOUT waiting
  81 * for the mailbox command to complete.
  82 **/
  83int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
  84                            uint8_t outCount, uint32_t *mbx_cmd,
  85                            uint32_t *mbx_sts)
  86{
  87        int status = QLA_ERROR;
  88        uint8_t i;
  89        u_long wait_count;
  90        unsigned long flags = 0;
  91        uint32_t dev_state;
  92
  93        /* Make sure that pointers are valid */
  94        if (!mbx_cmd || !mbx_sts) {
  95                DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
  96                              "pointer\n", ha->host_no, __func__));
  97                return status;
  98        }
  99
 100        if (is_qla40XX(ha)) {
 101                if (test_bit(AF_HA_REMOVAL, &ha->flags)) {
 102                        DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: "
 103                                          "prematurely completing mbx cmd as "
 104                                          "adapter removal detected\n",
 105                                          ha->host_no, __func__));
 106                        return status;
 107                }
 108        }
 109
 110        if ((is_aer_supported(ha)) &&
 111            (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))) {
 112                DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, "
 113                    "timeout MBX Exiting.\n", ha->host_no, __func__));
 114                return status;
 115        }
 116
 117        /* Mailbox code active */
 118        wait_count = MBOX_TOV * 100;
 119
 120        while (wait_count--) {
 121                mutex_lock(&ha->mbox_sem);
 122                if (!test_bit(AF_MBOX_COMMAND, &ha->flags)) {
 123                        set_bit(AF_MBOX_COMMAND, &ha->flags);
 124                        mutex_unlock(&ha->mbox_sem);
 125                        break;
 126                }
 127                mutex_unlock(&ha->mbox_sem);
 128                if (!wait_count) {
 129                        DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
 130                                ha->host_no, __func__));
 131                        return status;
 132                }
 133                msleep(10);
 134        }
 135
 136        if (is_qla80XX(ha)) {
 137                if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
 138                        DEBUG2(ql4_printk(KERN_WARNING, ha,
 139                                          "scsi%ld: %s: prematurely completing mbx cmd as firmware recovery detected\n",
 140                                          ha->host_no, __func__));
 141                        goto mbox_exit;
 142                }
 143                /* Do not send any mbx cmd if h/w is in failed state*/
 144                ha->isp_ops->idc_lock(ha);
 145                dev_state = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DEV_STATE);
 146                ha->isp_ops->idc_unlock(ha);
 147                if (dev_state == QLA8XXX_DEV_FAILED) {
 148                        ql4_printk(KERN_WARNING, ha,
 149                                   "scsi%ld: %s: H/W is in failed state, do not send any mailbox commands\n",
 150                                   ha->host_no, __func__);
 151                        goto mbox_exit;
 152                }
 153        }
 154
 155        spin_lock_irqsave(&ha->hardware_lock, flags);
 156
 157        ha->mbox_status_count = outCount;
 158        for (i = 0; i < outCount; i++)
 159                ha->mbox_status[i] = 0;
 160
 161        /* Queue the mailbox command to the firmware */
 162        ha->isp_ops->queue_mailbox_command(ha, mbx_cmd, inCount);
 163
 164        spin_unlock_irqrestore(&ha->hardware_lock, flags);
 165
 166        /* Wait for completion */
 167
 168        /*
 169         * If we don't want status, don't wait for the mailbox command to
 170         * complete.  For example, MBOX_CMD_RESET_FW doesn't return status,
 171         * you must poll the inbound Interrupt Mask for completion.
 172         */
 173        if (outCount == 0) {
 174                status = QLA_SUCCESS;
 175                goto mbox_exit;
 176        }
 177
 178        /*
 179         * Wait for completion: Poll or completion queue
 180         */
 181        if (qla4xxx_is_intr_poll_mode(ha)) {
 182                /* Poll for command to complete */
 183                wait_count = jiffies + MBOX_TOV * HZ;
 184                while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
 185                        if (time_after_eq(jiffies, wait_count))
 186                                break;
 187                        /*
 188                         * Service the interrupt.
 189                         * The ISR will save the mailbox status registers
 190                         * to a temporary storage location in the adapter
 191                         * structure.
 192                         */
 193                        spin_lock_irqsave(&ha->hardware_lock, flags);
 194                        ha->isp_ops->process_mailbox_interrupt(ha, outCount);
 195                        spin_unlock_irqrestore(&ha->hardware_lock, flags);
 196                        msleep(10);
 197                }
 198        } else {
 199                /* Do not poll for completion. Use completion queue */
 200                set_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags);
 201                wait_for_completion_timeout(&ha->mbx_intr_comp, MBOX_TOV * HZ);
 202                clear_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags);
 203        }
 204
 205        /* Check for mailbox timeout. */
 206        if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
 207                if (is_qla80XX(ha) &&
 208                    test_bit(AF_FW_RECOVERY, &ha->flags)) {
 209                        DEBUG2(ql4_printk(KERN_INFO, ha,
 210                            "scsi%ld: %s: prematurely completing mbx cmd as "
 211                            "firmware recovery detected\n",
 212                            ha->host_no, __func__));
 213                        goto mbox_exit;
 214                }
 215                ql4_printk(KERN_WARNING, ha, "scsi%ld: Mailbox Cmd 0x%08X timed out, Scheduling Adapter Reset\n",
 216                           ha->host_no, mbx_cmd[0]);
 217                ha->mailbox_timeout_count++;
 218                mbx_sts[0] = (-1);
 219                set_bit(DPC_RESET_HA, &ha->dpc_flags);
 220                if (is_qla8022(ha)) {
 221                        ql4_printk(KERN_INFO, ha,
 222                                   "disabling pause transmit on port 0 & 1.\n");
 223                        qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
 224                                        CRB_NIU_XG_PAUSE_CTL_P0 |
 225                                        CRB_NIU_XG_PAUSE_CTL_P1);
 226                } else if (is_qla8032(ha) || is_qla8042(ha)) {
 227                        ql4_printk(KERN_INFO, ha, " %s: disabling pause transmit on port 0 & 1.\n",
 228                                   __func__);
 229                        qla4_83xx_disable_pause(ha);
 230                }
 231                goto mbox_exit;
 232        }
 233
 234        /*
 235         * Copy the mailbox out registers to the caller's mailbox in/out
 236         * structure.
 237         */
 238        spin_lock_irqsave(&ha->hardware_lock, flags);
 239        for (i = 0; i < outCount; i++)
 240                mbx_sts[i] = ha->mbox_status[i];
 241
 242        /* Set return status and error flags (if applicable). */
 243        switch (ha->mbox_status[0]) {
 244        case MBOX_STS_COMMAND_COMPLETE:
 245                status = QLA_SUCCESS;
 246                break;
 247
 248        case MBOX_STS_INTERMEDIATE_COMPLETION:
 249                status = QLA_SUCCESS;
 250                break;
 251
 252        case MBOX_STS_BUSY:
 253                ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cmd = %08X, ISP BUSY\n",
 254                           ha->host_no, __func__, mbx_cmd[0]);
 255                ha->mailbox_timeout_count++;
 256                break;
 257
 258        default:
 259                ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: FAILED, MBOX CMD = %08X, MBOX STS = %08X %08X %08X %08X %08X %08X %08X %08X\n",
 260                           ha->host_no, __func__, mbx_cmd[0], mbx_sts[0],
 261                           mbx_sts[1], mbx_sts[2], mbx_sts[3], mbx_sts[4],
 262                           mbx_sts[5], mbx_sts[6], mbx_sts[7]);
 263                break;
 264        }
 265        spin_unlock_irqrestore(&ha->hardware_lock, flags);
 266
 267mbox_exit:
 268        mutex_lock(&ha->mbox_sem);
 269        clear_bit(AF_MBOX_COMMAND, &ha->flags);
 270        mutex_unlock(&ha->mbox_sem);
 271        clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
 272
 273        return status;
 274}
 275
 276/**
 277 * qla4xxx_get_minidump_template - Get the firmware template
 278 * @ha: Pointer to host adapter structure.
 279 * @phys_addr: dma address for template
 280 *
 281 * Obtain the minidump template from firmware during initialization
 282 * as it may not be available when minidump is desired.
 283 **/
 284int qla4xxx_get_minidump_template(struct scsi_qla_host *ha,
 285                                  dma_addr_t phys_addr)
 286{
 287        uint32_t mbox_cmd[MBOX_REG_COUNT];
 288        uint32_t mbox_sts[MBOX_REG_COUNT];
 289        int status;
 290
 291        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 292        memset(&mbox_sts, 0, sizeof(mbox_sts));
 293
 294        mbox_cmd[0] = MBOX_CMD_MINIDUMP;
 295        mbox_cmd[1] = MINIDUMP_GET_TMPLT_SUBCOMMAND;
 296        mbox_cmd[2] = LSDW(phys_addr);
 297        mbox_cmd[3] = MSDW(phys_addr);
 298        mbox_cmd[4] = ha->fw_dump_tmplt_size;
 299        mbox_cmd[5] = 0;
 300
 301        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
 302                                         &mbox_sts[0]);
 303        if (status != QLA_SUCCESS) {
 304                DEBUG2(ql4_printk(KERN_INFO, ha,
 305                                  "scsi%ld: %s: Cmd = %08X, mbx[0] = 0x%04x, mbx[1] = 0x%04x\n",
 306                                  ha->host_no, __func__, mbox_cmd[0],
 307                                  mbox_sts[0], mbox_sts[1]));
 308        }
 309        return status;
 310}
 311
 312/**
 313 * qla4xxx_req_template_size - Get minidump template size from firmware.
 314 * @ha: Pointer to host adapter structure.
 315 **/
 316int qla4xxx_req_template_size(struct scsi_qla_host *ha)
 317{
 318        uint32_t mbox_cmd[MBOX_REG_COUNT];
 319        uint32_t mbox_sts[MBOX_REG_COUNT];
 320        int status;
 321
 322        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 323        memset(&mbox_sts, 0, sizeof(mbox_sts));
 324
 325        mbox_cmd[0] = MBOX_CMD_MINIDUMP;
 326        mbox_cmd[1] = MINIDUMP_GET_SIZE_SUBCOMMAND;
 327
 328        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0],
 329                                         &mbox_sts[0]);
 330        if (status == QLA_SUCCESS) {
 331                ha->fw_dump_tmplt_size = mbox_sts[1];
 332                DEBUG2(ql4_printk(KERN_INFO, ha,
 333                                  "%s: sts[0]=0x%04x, template  size=0x%04x, size_cm_02=0x%04x, size_cm_04=0x%04x, size_cm_08=0x%04x, size_cm_10=0x%04x, size_cm_FF=0x%04x, version=0x%04x\n",
 334                                  __func__, mbox_sts[0], mbox_sts[1],
 335                                  mbox_sts[2], mbox_sts[3], mbox_sts[4],
 336                                  mbox_sts[5], mbox_sts[6], mbox_sts[7]));
 337                if (ha->fw_dump_tmplt_size == 0)
 338                        status = QLA_ERROR;
 339        } else {
 340                ql4_printk(KERN_WARNING, ha,
 341                           "%s: Error sts[0]=0x%04x, mbx[1]=0x%04x\n",
 342                           __func__, mbox_sts[0], mbox_sts[1]);
 343                status = QLA_ERROR;
 344        }
 345
 346        return status;
 347}
 348
 349void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha)
 350{
 351        set_bit(AF_FW_RECOVERY, &ha->flags);
 352        ql4_printk(KERN_INFO, ha, "scsi%ld: %s: set FW RECOVERY!\n",
 353            ha->host_no, __func__);
 354
 355        if (test_bit(AF_MBOX_COMMAND, &ha->flags)) {
 356                if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) {
 357                        complete(&ha->mbx_intr_comp);
 358                        ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
 359                            "recovery, doing premature completion of "
 360                            "mbx cmd\n", ha->host_no, __func__);
 361
 362                } else {
 363                        set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
 364                        ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
 365                            "recovery, doing premature completion of "
 366                            "polling mbx cmd\n", ha->host_no, __func__);
 367                }
 368        }
 369}
 370
 371static uint8_t
 372qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 373                 uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
 374{
 375        memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
 376        memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
 377
 378        if (is_qla8022(ha))
 379                qla4_82xx_wr_32(ha, ha->nx_db_wr_ptr, 0);
 380
 381        mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
 382        mbox_cmd[1] = 0;
 383        mbox_cmd[2] = LSDW(init_fw_cb_dma);
 384        mbox_cmd[3] = MSDW(init_fw_cb_dma);
 385        mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
 386
 387        if (qla4xxx_mailbox_command(ha, 6, 6, mbox_cmd, mbox_sts) !=
 388            QLA_SUCCESS) {
 389                DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
 390                              "MBOX_CMD_INITIALIZE_FIRMWARE"
 391                              " failed w/ status %04X\n",
 392                              ha->host_no, __func__, mbox_sts[0]));
 393                return QLA_ERROR;
 394        }
 395        return QLA_SUCCESS;
 396}
 397
 398uint8_t
 399qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 400                 uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
 401{
 402        memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
 403        memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
 404        mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
 405        mbox_cmd[2] = LSDW(init_fw_cb_dma);
 406        mbox_cmd[3] = MSDW(init_fw_cb_dma);
 407        mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
 408
 409        if (qla4xxx_mailbox_command(ha, 5, 5, mbox_cmd, mbox_sts) !=
 410            QLA_SUCCESS) {
 411                DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
 412                              "MBOX_CMD_GET_INIT_FW_CTRL_BLOCK"
 413                              " failed w/ status %04X\n",
 414                              ha->host_no, __func__, mbox_sts[0]));
 415                return QLA_ERROR;
 416        }
 417        return QLA_SUCCESS;
 418}
 419
 420uint8_t qla4xxx_set_ipaddr_state(uint8_t fw_ipaddr_state)
 421{
 422        uint8_t ipaddr_state;
 423
 424        switch (fw_ipaddr_state) {
 425        case IP_ADDRSTATE_UNCONFIGURED:
 426                ipaddr_state = ISCSI_IPDDRESS_STATE_UNCONFIGURED;
 427                break;
 428        case IP_ADDRSTATE_INVALID:
 429                ipaddr_state = ISCSI_IPDDRESS_STATE_INVALID;
 430                break;
 431        case IP_ADDRSTATE_ACQUIRING:
 432                ipaddr_state = ISCSI_IPDDRESS_STATE_ACQUIRING;
 433                break;
 434        case IP_ADDRSTATE_TENTATIVE:
 435                ipaddr_state = ISCSI_IPDDRESS_STATE_TENTATIVE;
 436                break;
 437        case IP_ADDRSTATE_DEPRICATED:
 438                ipaddr_state = ISCSI_IPDDRESS_STATE_DEPRECATED;
 439                break;
 440        case IP_ADDRSTATE_PREFERRED:
 441                ipaddr_state = ISCSI_IPDDRESS_STATE_VALID;
 442                break;
 443        case IP_ADDRSTATE_DISABLING:
 444                ipaddr_state = ISCSI_IPDDRESS_STATE_DISABLING;
 445                break;
 446        default:
 447                ipaddr_state = ISCSI_IPDDRESS_STATE_UNCONFIGURED;
 448        }
 449        return ipaddr_state;
 450}
 451
 452static void
 453qla4xxx_update_local_ip(struct scsi_qla_host *ha,
 454                        struct addr_ctrl_blk *init_fw_cb)
 455{
 456        ha->ip_config.tcp_options = le16_to_cpu(init_fw_cb->ipv4_tcp_opts);
 457        ha->ip_config.ipv4_options = le16_to_cpu(init_fw_cb->ipv4_ip_opts);
 458        ha->ip_config.ipv4_addr_state =
 459                        qla4xxx_set_ipaddr_state(init_fw_cb->ipv4_addr_state);
 460        ha->ip_config.eth_mtu_size =
 461                                le16_to_cpu(init_fw_cb->eth_mtu_size);
 462        ha->ip_config.ipv4_port = le16_to_cpu(init_fw_cb->ipv4_port);
 463
 464        if (ha->acb_version == ACB_SUPPORTED) {
 465                ha->ip_config.ipv6_options = le16_to_cpu(init_fw_cb->ipv6_opts);
 466                ha->ip_config.ipv6_addl_options =
 467                                le16_to_cpu(init_fw_cb->ipv6_addtl_opts);
 468                ha->ip_config.ipv6_tcp_options =
 469                                le16_to_cpu(init_fw_cb->ipv6_tcp_opts);
 470        }
 471
 472        /* Save IPv4 Address Info */
 473        memcpy(ha->ip_config.ip_address, init_fw_cb->ipv4_addr,
 474               min(sizeof(ha->ip_config.ip_address),
 475                   sizeof(init_fw_cb->ipv4_addr)));
 476        memcpy(ha->ip_config.subnet_mask, init_fw_cb->ipv4_subnet,
 477               min(sizeof(ha->ip_config.subnet_mask),
 478                   sizeof(init_fw_cb->ipv4_subnet)));
 479        memcpy(ha->ip_config.gateway, init_fw_cb->ipv4_gw_addr,
 480               min(sizeof(ha->ip_config.gateway),
 481                   sizeof(init_fw_cb->ipv4_gw_addr)));
 482
 483        ha->ip_config.ipv4_vlan_tag = be16_to_cpu(init_fw_cb->ipv4_vlan_tag);
 484        ha->ip_config.control = init_fw_cb->control;
 485        ha->ip_config.tcp_wsf = init_fw_cb->ipv4_tcp_wsf;
 486        ha->ip_config.ipv4_tos = init_fw_cb->ipv4_tos;
 487        ha->ip_config.ipv4_cache_id = init_fw_cb->ipv4_cacheid;
 488        ha->ip_config.ipv4_alt_cid_len = init_fw_cb->ipv4_dhcp_alt_cid_len;
 489        memcpy(ha->ip_config.ipv4_alt_cid, init_fw_cb->ipv4_dhcp_alt_cid,
 490               min(sizeof(ha->ip_config.ipv4_alt_cid),
 491                   sizeof(init_fw_cb->ipv4_dhcp_alt_cid)));
 492        ha->ip_config.ipv4_vid_len = init_fw_cb->ipv4_dhcp_vid_len;
 493        memcpy(ha->ip_config.ipv4_vid, init_fw_cb->ipv4_dhcp_vid,
 494               min(sizeof(ha->ip_config.ipv4_vid),
 495                   sizeof(init_fw_cb->ipv4_dhcp_vid)));
 496        ha->ip_config.ipv4_ttl = init_fw_cb->ipv4_ttl;
 497        ha->ip_config.def_timeout = le16_to_cpu(init_fw_cb->def_timeout);
 498        ha->ip_config.abort_timer = init_fw_cb->abort_timer;
 499        ha->ip_config.iscsi_options = le16_to_cpu(init_fw_cb->iscsi_opts);
 500        ha->ip_config.iscsi_max_pdu_size =
 501                                le16_to_cpu(init_fw_cb->iscsi_max_pdu_size);
 502        ha->ip_config.iscsi_first_burst_len =
 503                                le16_to_cpu(init_fw_cb->iscsi_fburst_len);
 504        ha->ip_config.iscsi_max_outstnd_r2t =
 505                                le16_to_cpu(init_fw_cb->iscsi_max_outstnd_r2t);
 506        ha->ip_config.iscsi_max_burst_len =
 507                                le16_to_cpu(init_fw_cb->iscsi_max_burst_len);
 508        memcpy(ha->ip_config.iscsi_name, init_fw_cb->iscsi_name,
 509               min(sizeof(ha->ip_config.iscsi_name),
 510                   sizeof(init_fw_cb->iscsi_name)));
 511
 512        if (is_ipv6_enabled(ha)) {
 513                /* Save IPv6 Address */
 514                ha->ip_config.ipv6_link_local_state =
 515                  qla4xxx_set_ipaddr_state(init_fw_cb->ipv6_lnk_lcl_addr_state);
 516                ha->ip_config.ipv6_addr0_state =
 517                        qla4xxx_set_ipaddr_state(init_fw_cb->ipv6_addr0_state);
 518                ha->ip_config.ipv6_addr1_state =
 519                        qla4xxx_set_ipaddr_state(init_fw_cb->ipv6_addr1_state);
 520
 521                switch (le16_to_cpu(init_fw_cb->ipv6_dflt_rtr_state)) {
 522                case IPV6_RTRSTATE_UNKNOWN:
 523                        ha->ip_config.ipv6_default_router_state =
 524                                                ISCSI_ROUTER_STATE_UNKNOWN;
 525                        break;
 526                case IPV6_RTRSTATE_MANUAL:
 527                        ha->ip_config.ipv6_default_router_state =
 528                                                ISCSI_ROUTER_STATE_MANUAL;
 529                        break;
 530                case IPV6_RTRSTATE_ADVERTISED:
 531                        ha->ip_config.ipv6_default_router_state =
 532                                                ISCSI_ROUTER_STATE_ADVERTISED;
 533                        break;
 534                case IPV6_RTRSTATE_STALE:
 535                        ha->ip_config.ipv6_default_router_state =
 536                                                ISCSI_ROUTER_STATE_STALE;
 537                        break;
 538                default:
 539                        ha->ip_config.ipv6_default_router_state =
 540                                                ISCSI_ROUTER_STATE_UNKNOWN;
 541                }
 542
 543                ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[0] = 0xFE;
 544                ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[1] = 0x80;
 545
 546                memcpy(&ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[8],
 547                       init_fw_cb->ipv6_if_id,
 548                       min(sizeof(ha->ip_config.ipv6_link_local_addr)/2,
 549                           sizeof(init_fw_cb->ipv6_if_id)));
 550                memcpy(&ha->ip_config.ipv6_addr0, init_fw_cb->ipv6_addr0,
 551                       min(sizeof(ha->ip_config.ipv6_addr0),
 552                           sizeof(init_fw_cb->ipv6_addr0)));
 553                memcpy(&ha->ip_config.ipv6_addr1, init_fw_cb->ipv6_addr1,
 554                       min(sizeof(ha->ip_config.ipv6_addr1),
 555                           sizeof(init_fw_cb->ipv6_addr1)));
 556                memcpy(&ha->ip_config.ipv6_default_router_addr,
 557                       init_fw_cb->ipv6_dflt_rtr_addr,
 558                       min(sizeof(ha->ip_config.ipv6_default_router_addr),
 559                           sizeof(init_fw_cb->ipv6_dflt_rtr_addr)));
 560                ha->ip_config.ipv6_vlan_tag =
 561                                be16_to_cpu(init_fw_cb->ipv6_vlan_tag);
 562                ha->ip_config.ipv6_port = le16_to_cpu(init_fw_cb->ipv6_port);
 563                ha->ip_config.ipv6_cache_id = init_fw_cb->ipv6_cache_id;
 564                ha->ip_config.ipv6_flow_lbl =
 565                                le16_to_cpu(init_fw_cb->ipv6_flow_lbl);
 566                ha->ip_config.ipv6_traffic_class =
 567                                init_fw_cb->ipv6_traffic_class;
 568                ha->ip_config.ipv6_hop_limit = init_fw_cb->ipv6_hop_limit;
 569                ha->ip_config.ipv6_nd_reach_time =
 570                                le32_to_cpu(init_fw_cb->ipv6_nd_reach_time);
 571                ha->ip_config.ipv6_nd_rexmit_timer =
 572                                le32_to_cpu(init_fw_cb->ipv6_nd_rexmit_timer);
 573                ha->ip_config.ipv6_nd_stale_timeout =
 574                                le32_to_cpu(init_fw_cb->ipv6_nd_stale_timeout);
 575                ha->ip_config.ipv6_dup_addr_detect_count =
 576                                        init_fw_cb->ipv6_dup_addr_detect_count;
 577                ha->ip_config.ipv6_gw_advrt_mtu =
 578                                le32_to_cpu(init_fw_cb->ipv6_gw_advrt_mtu);
 579                ha->ip_config.ipv6_tcp_wsf = init_fw_cb->ipv6_tcp_wsf;
 580        }
 581}
 582
 583uint8_t
 584qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
 585                          uint32_t *mbox_cmd,
 586                          uint32_t *mbox_sts,
 587                          struct addr_ctrl_blk  *init_fw_cb,
 588                          dma_addr_t init_fw_cb_dma)
 589{
 590        if (qla4xxx_get_ifcb(ha, mbox_cmd, mbox_sts, init_fw_cb_dma)
 591            != QLA_SUCCESS) {
 592                DEBUG2(printk(KERN_WARNING
 593                              "scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
 594                              ha->host_no, __func__));
 595                return QLA_ERROR;
 596        }
 597
 598        DEBUG2(qla4xxx_dump_buffer(init_fw_cb, sizeof(struct addr_ctrl_blk)));
 599
 600        /* Save some info in adapter structure. */
 601        ha->acb_version = init_fw_cb->acb_version;
 602        ha->firmware_options = le16_to_cpu(init_fw_cb->fw_options);
 603        ha->heartbeat_interval = init_fw_cb->hb_interval;
 604        memcpy(ha->name_string, init_fw_cb->iscsi_name,
 605                min(sizeof(ha->name_string),
 606                sizeof(init_fw_cb->iscsi_name)));
 607        ha->def_timeout = le16_to_cpu(init_fw_cb->def_timeout);
 608        /*memcpy(ha->alias, init_fw_cb->Alias,
 609               min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
 610
 611        qla4xxx_update_local_ip(ha, init_fw_cb);
 612
 613        return QLA_SUCCESS;
 614}
 615
 616/**
 617 * qla4xxx_initialize_fw_cb - initializes firmware control block.
 618 * @ha: Pointer to host adapter structure.
 619 **/
 620int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 621{
 622        struct addr_ctrl_blk *init_fw_cb;
 623        dma_addr_t init_fw_cb_dma;
 624        uint32_t mbox_cmd[MBOX_REG_COUNT];
 625        uint32_t mbox_sts[MBOX_REG_COUNT];
 626        int status = QLA_ERROR;
 627
 628        init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev,
 629                                         sizeof(struct addr_ctrl_blk),
 630                                         &init_fw_cb_dma, GFP_KERNEL);
 631        if (init_fw_cb == NULL) {
 632                DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
 633                              ha->host_no, __func__));
 634                goto exit_init_fw_cb_no_free;
 635        }
 636
 637        /* Get Initialize Firmware Control Block. */
 638        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 639        memset(&mbox_sts, 0, sizeof(mbox_sts));
 640
 641        if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 642            QLA_SUCCESS) {
 643                dma_free_coherent(&ha->pdev->dev,
 644                                  sizeof(struct addr_ctrl_blk),
 645                                  init_fw_cb, init_fw_cb_dma);
 646                goto exit_init_fw_cb;
 647        }
 648
 649        /* Fill in the request and response queue information. */
 650        init_fw_cb->rqq_consumer_idx = cpu_to_le16(ha->request_out);
 651        init_fw_cb->compq_producer_idx = cpu_to_le16(ha->response_in);
 652        init_fw_cb->rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
 653        init_fw_cb->compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
 654        init_fw_cb->rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma));
 655        init_fw_cb->rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma));
 656        init_fw_cb->compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma));
 657        init_fw_cb->compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma));
 658        init_fw_cb->shdwreg_addr_lo = cpu_to_le32(LSDW(ha->shadow_regs_dma));
 659        init_fw_cb->shdwreg_addr_hi = cpu_to_le32(MSDW(ha->shadow_regs_dma));
 660
 661        /* Set up required options. */
 662        init_fw_cb->fw_options |=
 663                __constant_cpu_to_le16(FWOPT_SESSION_MODE |
 664                                       FWOPT_INITIATOR_MODE);
 665
 666        if (is_qla80XX(ha))
 667                init_fw_cb->fw_options |=
 668                    __constant_cpu_to_le16(FWOPT_ENABLE_CRBDB);
 669
 670        init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
 671
 672        init_fw_cb->add_fw_options = 0;
 673        init_fw_cb->add_fw_options |=
 674                        __constant_cpu_to_le16(ADFWOPT_SERIALIZE_TASK_MGMT);
 675        init_fw_cb->add_fw_options |=
 676                        __constant_cpu_to_le16(ADFWOPT_AUTOCONN_DISABLE);
 677
 678        if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)
 679                != QLA_SUCCESS) {
 680                DEBUG2(printk(KERN_WARNING
 681                              "scsi%ld: %s: Failed to set init_fw_ctrl_blk\n",
 682                              ha->host_no, __func__));
 683                goto exit_init_fw_cb;
 684        }
 685
 686        if (qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0],
 687                init_fw_cb, init_fw_cb_dma) != QLA_SUCCESS) {
 688                DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n",
 689                                ha->host_no, __func__));
 690                goto exit_init_fw_cb;
 691        }
 692        status = QLA_SUCCESS;
 693
 694exit_init_fw_cb:
 695        dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
 696                                init_fw_cb, init_fw_cb_dma);
 697exit_init_fw_cb_no_free:
 698        return status;
 699}
 700
 701/**
 702 * qla4xxx_get_dhcp_ip_address - gets HBA ip address via DHCP
 703 * @ha: Pointer to host adapter structure.
 704 **/
 705int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
 706{
 707        struct addr_ctrl_blk *init_fw_cb;
 708        dma_addr_t init_fw_cb_dma;
 709        uint32_t mbox_cmd[MBOX_REG_COUNT];
 710        uint32_t mbox_sts[MBOX_REG_COUNT];
 711
 712        init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev,
 713                                         sizeof(struct addr_ctrl_blk),
 714                                         &init_fw_cb_dma, GFP_KERNEL);
 715        if (init_fw_cb == NULL) {
 716                printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
 717                       __func__);
 718                return QLA_ERROR;
 719        }
 720
 721        /* Get Initialize Firmware Control Block. */
 722        if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 723            QLA_SUCCESS) {
 724                DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
 725                              ha->host_no, __func__));
 726                dma_free_coherent(&ha->pdev->dev,
 727                                  sizeof(struct addr_ctrl_blk),
 728                                  init_fw_cb, init_fw_cb_dma);
 729                return QLA_ERROR;
 730        }
 731
 732        /* Save IP Address. */
 733        qla4xxx_update_local_ip(ha, init_fw_cb);
 734        dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
 735                                init_fw_cb, init_fw_cb_dma);
 736
 737        return QLA_SUCCESS;
 738}
 739
 740/**
 741 * qla4xxx_get_firmware_state - gets firmware state of HBA
 742 * @ha: Pointer to host adapter structure.
 743 **/
 744int qla4xxx_get_firmware_state(struct scsi_qla_host * ha)
 745{
 746        uint32_t mbox_cmd[MBOX_REG_COUNT];
 747        uint32_t mbox_sts[MBOX_REG_COUNT];
 748
 749        /* Get firmware version */
 750        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 751        memset(&mbox_sts, 0, sizeof(mbox_sts));
 752
 753        mbox_cmd[0] = MBOX_CMD_GET_FW_STATE;
 754
 755        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 4, &mbox_cmd[0], &mbox_sts[0]) !=
 756            QLA_SUCCESS) {
 757                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
 758                              "status %04X\n", ha->host_no, __func__,
 759                              mbox_sts[0]));
 760                return QLA_ERROR;
 761        }
 762        ha->firmware_state = mbox_sts[1];
 763        ha->board_id = mbox_sts[2];
 764        ha->addl_fw_state = mbox_sts[3];
 765        DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
 766                      ha->host_no, __func__, ha->firmware_state);)
 767
 768        return QLA_SUCCESS;
 769}
 770
 771/**
 772 * qla4xxx_get_firmware_status - retrieves firmware status
 773 * @ha: Pointer to host adapter structure.
 774 **/
 775int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
 776{
 777        uint32_t mbox_cmd[MBOX_REG_COUNT];
 778        uint32_t mbox_sts[MBOX_REG_COUNT];
 779
 780        /* Get firmware version */
 781        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 782        memset(&mbox_sts, 0, sizeof(mbox_sts));
 783
 784        mbox_cmd[0] = MBOX_CMD_GET_FW_STATUS;
 785
 786        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) !=
 787            QLA_SUCCESS) {
 788                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
 789                              "status %04X\n", ha->host_no, __func__,
 790                              mbox_sts[0]));
 791                return QLA_ERROR;
 792        }
 793
 794        /* High-water mark of IOCBs */
 795        ha->iocb_hiwat = mbox_sts[2];
 796        DEBUG2(ql4_printk(KERN_INFO, ha,
 797                          "%s: firmware IOCBs available = %d\n", __func__,
 798                          ha->iocb_hiwat));
 799
 800        if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
 801                ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
 802
 803        /* Ideally, we should not enter this code, as the # of firmware
 804         * IOCBs is hard-coded in the firmware. We set a default
 805         * iocb_hiwat here just in case */
 806        if (ha->iocb_hiwat == 0) {
 807                ha->iocb_hiwat = REQUEST_QUEUE_DEPTH / 4;
 808                DEBUG2(ql4_printk(KERN_WARNING, ha,
 809                                  "%s: Setting IOCB's to = %d\n", __func__,
 810                                  ha->iocb_hiwat));
 811        }
 812
 813        return QLA_SUCCESS;
 814}
 815
 816/**
 817 * qla4xxx_get_fwddb_entry - retrieves firmware ddb entry
 818 * @ha: Pointer to host adapter structure.
 819 * @fw_ddb_index: Firmware's device database index
 820 * @fw_ddb_entry: Pointer to firmware's device database entry structure
 821 * @num_valid_ddb_entries: Pointer to number of valid ddb entries
 822 * @next_ddb_index: Pointer to next valid device database index
 823 * @fw_ddb_device_state: Pointer to device state
 824 **/
 825int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
 826                            uint16_t fw_ddb_index,
 827                            struct dev_db_entry *fw_ddb_entry,
 828                            dma_addr_t fw_ddb_entry_dma,
 829                            uint32_t *num_valid_ddb_entries,
 830                            uint32_t *next_ddb_index,
 831                            uint32_t *fw_ddb_device_state,
 832                            uint32_t *conn_err_detail,
 833                            uint16_t *tcp_source_port_num,
 834                            uint16_t *connection_id)
 835{
 836        int status = QLA_ERROR;
 837        uint16_t options;
 838        uint32_t mbox_cmd[MBOX_REG_COUNT];
 839        uint32_t mbox_sts[MBOX_REG_COUNT];
 840
 841        /* Make sure the device index is valid */
 842        if (fw_ddb_index >= MAX_DDB_ENTRIES) {
 843                DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n",
 844                              ha->host_no, __func__, fw_ddb_index));
 845                goto exit_get_fwddb;
 846        }
 847        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 848        memset(&mbox_sts, 0, sizeof(mbox_sts));
 849        if (fw_ddb_entry)
 850                memset(fw_ddb_entry, 0, sizeof(struct dev_db_entry));
 851
 852        mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY;
 853        mbox_cmd[1] = (uint32_t) fw_ddb_index;
 854        mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
 855        mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
 856        mbox_cmd[4] = sizeof(struct dev_db_entry);
 857
 858        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 7, &mbox_cmd[0], &mbox_sts[0]) ==
 859            QLA_ERROR) {
 860                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
 861                              " with status 0x%04X\n", ha->host_no, __func__,
 862                              mbox_sts[0]));
 863                goto exit_get_fwddb;
 864        }
 865        if (fw_ddb_index != mbox_sts[1]) {
 866                DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n",
 867                              ha->host_no, __func__, fw_ddb_index,
 868                              mbox_sts[1]));
 869                goto exit_get_fwddb;
 870        }
 871        if (fw_ddb_entry) {
 872                options = le16_to_cpu(fw_ddb_entry->options);
 873                if (options & DDB_OPT_IPV6_DEVICE) {
 874                        ql4_printk(KERN_INFO, ha, "%s: DDB[%d] MB0 %04x Tot %d "
 875                                "Next %d State %04x ConnErr %08x %pI6 "
 876                                ":%04d \"%s\"\n", __func__, fw_ddb_index,
 877                                mbox_sts[0], mbox_sts[2], mbox_sts[3],
 878                                mbox_sts[4], mbox_sts[5],
 879                                fw_ddb_entry->ip_addr,
 880                                le16_to_cpu(fw_ddb_entry->port),
 881                                fw_ddb_entry->iscsi_name);
 882                } else {
 883                        ql4_printk(KERN_INFO, ha, "%s: DDB[%d] MB0 %04x Tot %d "
 884                                "Next %d State %04x ConnErr %08x %pI4 "
 885                                ":%04d \"%s\"\n", __func__, fw_ddb_index,
 886                                mbox_sts[0], mbox_sts[2], mbox_sts[3],
 887                                mbox_sts[4], mbox_sts[5],
 888                                fw_ddb_entry->ip_addr,
 889                                le16_to_cpu(fw_ddb_entry->port),
 890                                fw_ddb_entry->iscsi_name);
 891                }
 892        }
 893        if (num_valid_ddb_entries)
 894                *num_valid_ddb_entries = mbox_sts[2];
 895        if (next_ddb_index)
 896                *next_ddb_index = mbox_sts[3];
 897        if (fw_ddb_device_state)
 898                *fw_ddb_device_state = mbox_sts[4];
 899
 900        /*
 901         * RA: This mailbox has been changed to pass connection error and
 902         * details.  Its true for ISP4010 as per Version E - Not sure when it
 903         * was changed.  Get the time2wait from the fw_dd_entry field :
 904         * default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY
 905         * struct.
 906         */
 907        if (conn_err_detail)
 908                *conn_err_detail = mbox_sts[5];
 909        if (tcp_source_port_num)
 910                *tcp_source_port_num = (uint16_t) (mbox_sts[6] >> 16);
 911        if (connection_id)
 912                *connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
 913        status = QLA_SUCCESS;
 914
 915exit_get_fwddb:
 916        return status;
 917}
 918
 919int qla4xxx_conn_open(struct scsi_qla_host *ha, uint16_t fw_ddb_index)
 920{
 921        uint32_t mbox_cmd[MBOX_REG_COUNT];
 922        uint32_t mbox_sts[MBOX_REG_COUNT];
 923        int status;
 924
 925        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 926        memset(&mbox_sts, 0, sizeof(mbox_sts));
 927
 928        mbox_cmd[0] = MBOX_CMD_CONN_OPEN;
 929        mbox_cmd[1] = fw_ddb_index;
 930
 931        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
 932                                         &mbox_sts[0]);
 933        DEBUG2(ql4_printk(KERN_INFO, ha,
 934                          "%s: status = %d mbx0 = 0x%x mbx1 = 0x%x\n",
 935                          __func__, status, mbox_sts[0], mbox_sts[1]));
 936        return status;
 937}
 938
 939/**
 940 * qla4xxx_set_fwddb_entry - sets a ddb entry.
 941 * @ha: Pointer to host adapter structure.
 942 * @fw_ddb_index: Firmware's device database index
 943 * @fw_ddb_entry_dma: dma address of ddb entry
 944 * @mbx_sts: mailbox 0 to be returned or NULL
 945 *
 946 * This routine initializes or updates the adapter's device database
 947 * entry for the specified device.
 948 **/
 949int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
 950                          dma_addr_t fw_ddb_entry_dma, uint32_t *mbx_sts)
 951{
 952        uint32_t mbox_cmd[MBOX_REG_COUNT];
 953        uint32_t mbox_sts[MBOX_REG_COUNT];
 954        int status;
 955
 956        /* Do not wait for completion. The firmware will send us an
 957         * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
 958         */
 959        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 960        memset(&mbox_sts, 0, sizeof(mbox_sts));
 961
 962        mbox_cmd[0] = MBOX_CMD_SET_DATABASE_ENTRY;
 963        mbox_cmd[1] = (uint32_t) fw_ddb_index;
 964        mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
 965        mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
 966        mbox_cmd[4] = sizeof(struct dev_db_entry);
 967
 968        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0],
 969                                         &mbox_sts[0]);
 970        if (mbx_sts)
 971                *mbx_sts = mbox_sts[0];
 972        DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n",
 973            ha->host_no, __func__, status, mbox_sts[0], mbox_sts[4]);)
 974
 975        return status;
 976}
 977
 978int qla4xxx_session_logout_ddb(struct scsi_qla_host *ha,
 979                               struct ddb_entry *ddb_entry, int options)
 980{
 981        int status;
 982        uint32_t mbox_cmd[MBOX_REG_COUNT];
 983        uint32_t mbox_sts[MBOX_REG_COUNT];
 984
 985        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 986        memset(&mbox_sts, 0, sizeof(mbox_sts));
 987
 988        mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
 989        mbox_cmd[1] = ddb_entry->fw_ddb_index;
 990        mbox_cmd[3] = options;
 991
 992        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
 993                                         &mbox_sts[0]);
 994        if (status != QLA_SUCCESS) {
 995                DEBUG2(ql4_printk(KERN_INFO, ha,
 996                                  "%s: MBOX_CMD_CONN_CLOSE_SESS_LOGOUT "
 997                                  "failed sts %04X %04X", __func__,
 998                                  mbox_sts[0], mbox_sts[1]));
 999                if ((mbox_sts[0] == MBOX_STS_COMMAND_ERROR) &&
1000                    (mbox_sts[1] == DDB_NOT_LOGGED_IN)) {
1001                        set_bit(DDB_CONN_CLOSE_FAILURE, &ddb_entry->flags);
1002                }
1003        }
1004
1005        return status;
1006}
1007
1008/**
1009 * qla4xxx_get_crash_record - retrieves crash record.
1010 * @ha: Pointer to host adapter structure.
1011 *
1012 * This routine retrieves a crash record from the QLA4010 after an 8002h aen.
1013 **/
1014void qla4xxx_get_crash_record(struct scsi_qla_host * ha)
1015{
1016        uint32_t mbox_cmd[MBOX_REG_COUNT];
1017        uint32_t mbox_sts[MBOX_REG_COUNT];
1018        struct crash_record *crash_record = NULL;
1019        dma_addr_t crash_record_dma = 0;
1020        uint32_t crash_record_size = 0;
1021
1022        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1023        memset(&mbox_sts, 0, sizeof(mbox_cmd));
1024
1025        /* Get size of crash record. */
1026        mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
1027
1028        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1029            QLA_SUCCESS) {
1030                DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
1031                              ha->host_no, __func__));
1032                goto exit_get_crash_record;
1033        }
1034        crash_record_size = mbox_sts[4];
1035        if (crash_record_size == 0) {
1036                DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
1037                              ha->host_no, __func__));
1038                goto exit_get_crash_record;
1039        }
1040
1041        /* Alloc Memory for Crash Record. */
1042        crash_record = dma_alloc_coherent(&ha->pdev->dev, crash_record_size,
1043                                          &crash_record_dma, GFP_KERNEL);
1044        if (crash_record == NULL)
1045                goto exit_get_crash_record;
1046
1047        /* Get Crash Record. */
1048        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1049        memset(&mbox_sts, 0, sizeof(mbox_cmd));
1050
1051        mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
1052        mbox_cmd[2] = LSDW(crash_record_dma);
1053        mbox_cmd[3] = MSDW(crash_record_dma);
1054        mbox_cmd[4] = crash_record_size;
1055
1056        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1057            QLA_SUCCESS)
1058                goto exit_get_crash_record;
1059
1060        /* Dump Crash Record. */
1061
1062exit_get_crash_record:
1063        if (crash_record)
1064                dma_free_coherent(&ha->pdev->dev, crash_record_size,
1065                                  crash_record, crash_record_dma);
1066}
1067
1068/**
1069 * qla4xxx_get_conn_event_log - retrieves connection event log
1070 * @ha: Pointer to host adapter structure.
1071 **/
1072void qla4xxx_get_conn_event_log(struct scsi_qla_host * ha)
1073{
1074        uint32_t mbox_cmd[MBOX_REG_COUNT];
1075        uint32_t mbox_sts[MBOX_REG_COUNT];
1076        struct conn_event_log_entry *event_log = NULL;
1077        dma_addr_t event_log_dma = 0;
1078        uint32_t event_log_size = 0;
1079        uint32_t num_valid_entries;
1080        uint32_t      oldest_entry = 0;
1081        uint32_t        max_event_log_entries;
1082        uint8_t         i;
1083
1084        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1085        memset(&mbox_sts, 0, sizeof(mbox_cmd));
1086
1087        /* Get size of crash record. */
1088        mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
1089
1090        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1091            QLA_SUCCESS)
1092                goto exit_get_event_log;
1093
1094        event_log_size = mbox_sts[4];
1095        if (event_log_size == 0)
1096                goto exit_get_event_log;
1097
1098        /* Alloc Memory for Crash Record. */
1099        event_log = dma_alloc_coherent(&ha->pdev->dev, event_log_size,
1100                                       &event_log_dma, GFP_KERNEL);
1101        if (event_log == NULL)
1102                goto exit_get_event_log;
1103
1104        /* Get Crash Record. */
1105        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1106        memset(&mbox_sts, 0, sizeof(mbox_cmd));
1107
1108        mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
1109        mbox_cmd[2] = LSDW(event_log_dma);
1110        mbox_cmd[3] = MSDW(event_log_dma);
1111
1112        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
1113            QLA_SUCCESS) {
1114                DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
1115                              "log!\n", ha->host_no, __func__));
1116                goto exit_get_event_log;
1117        }
1118
1119        /* Dump Event Log. */
1120        num_valid_entries = mbox_sts[1];
1121
1122        max_event_log_entries = event_log_size /
1123                sizeof(struct conn_event_log_entry);
1124
1125        if (num_valid_entries > max_event_log_entries)
1126                oldest_entry = num_valid_entries % max_event_log_entries;
1127
1128        DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
1129                      ha->host_no, num_valid_entries));
1130
1131        if (ql4xextended_error_logging == 3) {
1132                if (oldest_entry == 0) {
1133                        /* Circular Buffer has not wrapped around */
1134                        for (i=0; i < num_valid_entries; i++) {
1135                                qla4xxx_dump_buffer((uint8_t *)event_log+
1136                                                    (i*sizeof(*event_log)),
1137                                                    sizeof(*event_log));
1138                        }
1139                }
1140                else {
1141                        /* Circular Buffer has wrapped around -
1142                         * display accordingly*/
1143                        for (i=oldest_entry; i < max_event_log_entries; i++) {
1144                                qla4xxx_dump_buffer((uint8_t *)event_log+
1145                                                    (i*sizeof(*event_log)),
1146                                                    sizeof(*event_log));
1147                        }
1148                        for (i=0; i < oldest_entry; i++) {
1149                                qla4xxx_dump_buffer((uint8_t *)event_log+
1150                                                    (i*sizeof(*event_log)),
1151                                                    sizeof(*event_log));
1152                        }
1153                }
1154        }
1155
1156exit_get_event_log:
1157        if (event_log)
1158                dma_free_coherent(&ha->pdev->dev, event_log_size, event_log,
1159                                  event_log_dma);
1160}
1161
1162/**
1163 * qla4xxx_abort_task - issues Abort Task
1164 * @ha: Pointer to host adapter structure.
1165 * @srb: Pointer to srb entry
1166 *
1167 * This routine performs a LUN RESET on the specified target/lun.
1168 * The caller must ensure that the ddb_entry and lun_entry pointers
1169 * are valid before calling this routine.
1170 **/
1171int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb)
1172{
1173        uint32_t mbox_cmd[MBOX_REG_COUNT];
1174        uint32_t mbox_sts[MBOX_REG_COUNT];
1175        struct scsi_cmnd *cmd = srb->cmd;
1176        int status = QLA_SUCCESS;
1177        unsigned long flags = 0;
1178        uint32_t index;
1179
1180        /*
1181         * Send abort task command to ISP, so that the ISP will return
1182         * request with ABORT status
1183         */
1184        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1185        memset(&mbox_sts, 0, sizeof(mbox_sts));
1186
1187        spin_lock_irqsave(&ha->hardware_lock, flags);
1188        index = (unsigned long)(unsigned char *)cmd->host_scribble;
1189        spin_unlock_irqrestore(&ha->hardware_lock, flags);
1190
1191        /* Firmware already posted completion on response queue */
1192        if (index == MAX_SRBS)
1193                return status;
1194
1195        mbox_cmd[0] = MBOX_CMD_ABORT_TASK;
1196        mbox_cmd[1] = srb->ddb->fw_ddb_index;
1197        mbox_cmd[2] = index;
1198        /* Immediate Command Enable */
1199        mbox_cmd[5] = 0x01;
1200
1201        qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0],
1202            &mbox_sts[0]);
1203        if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE) {
1204                status = QLA_ERROR;
1205
1206                DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%llu: abort task FAILED: "
1207                    "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n",
1208                    ha->host_no, cmd->device->id, cmd->device->lun, mbox_sts[0],
1209                    mbox_sts[1], mbox_sts[2], mbox_sts[3], mbox_sts[4]));
1210        }
1211
1212        return status;
1213}
1214
1215/**
1216 * qla4xxx_reset_lun - issues LUN Reset
1217 * @ha: Pointer to host adapter structure.
1218 * @ddb_entry: Pointer to device database entry
1219 * @lun: lun number
1220 *
1221 * This routine performs a LUN RESET on the specified target/lun.
1222 * The caller must ensure that the ddb_entry and lun_entry pointers
1223 * are valid before calling this routine.
1224 **/
1225int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
1226                      uint64_t lun)
1227{
1228        uint32_t mbox_cmd[MBOX_REG_COUNT];
1229        uint32_t mbox_sts[MBOX_REG_COUNT];
1230        uint32_t scsi_lun[2];
1231        int status = QLA_SUCCESS;
1232
1233        DEBUG2(printk("scsi%ld:%d:%llu: lun reset issued\n", ha->host_no,
1234                      ddb_entry->fw_ddb_index, lun));
1235
1236        /*
1237         * Send lun reset command to ISP, so that the ISP will return all
1238         * outstanding requests with RESET status
1239         */
1240        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1241        memset(&mbox_sts, 0, sizeof(mbox_sts));
1242        int_to_scsilun(lun, (struct scsi_lun *) scsi_lun);
1243
1244        mbox_cmd[0] = MBOX_CMD_LUN_RESET;
1245        mbox_cmd[1] = ddb_entry->fw_ddb_index;
1246        /* FW expects LUN bytes 0-3 in Incoming Mailbox 2
1247         * (LUN byte 0 is LSByte, byte 3 is MSByte) */
1248        mbox_cmd[2] = cpu_to_le32(scsi_lun[0]);
1249        /* FW expects LUN bytes 4-7 in Incoming Mailbox 3
1250         * (LUN byte 4 is LSByte, byte 7 is MSByte) */
1251        mbox_cmd[3] = cpu_to_le32(scsi_lun[1]);
1252        mbox_cmd[5] = 0x01;     /* Immediate Command Enable */
1253
1254        qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]);
1255        if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
1256            mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
1257                status = QLA_ERROR;
1258
1259        return status;
1260}
1261
1262/**
1263 * qla4xxx_reset_target - issues target Reset
1264 * @ha: Pointer to host adapter structure.
1265 * @db_entry: Pointer to device database entry
1266 * @un_entry: Pointer to lun entry structure
1267 *
1268 * This routine performs a TARGET RESET on the specified target.
1269 * The caller must ensure that the ddb_entry pointers
1270 * are valid before calling this routine.
1271 **/
1272int qla4xxx_reset_target(struct scsi_qla_host *ha,
1273                         struct ddb_entry *ddb_entry)
1274{
1275        uint32_t mbox_cmd[MBOX_REG_COUNT];
1276        uint32_t mbox_sts[MBOX_REG_COUNT];
1277        int status = QLA_SUCCESS;
1278
1279        DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no,
1280                      ddb_entry->fw_ddb_index));
1281
1282        /*
1283         * Send target reset command to ISP, so that the ISP will return all
1284         * outstanding requests with RESET status
1285         */
1286        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1287        memset(&mbox_sts, 0, sizeof(mbox_sts));
1288
1289        mbox_cmd[0] = MBOX_CMD_TARGET_WARM_RESET;
1290        mbox_cmd[1] = ddb_entry->fw_ddb_index;
1291        mbox_cmd[5] = 0x01;     /* Immediate Command Enable */
1292
1293        qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
1294                                &mbox_sts[0]);
1295        if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
1296            mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
1297                status = QLA_ERROR;
1298
1299        return status;
1300}
1301
1302int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
1303                      uint32_t offset, uint32_t len)
1304{
1305        uint32_t mbox_cmd[MBOX_REG_COUNT];
1306        uint32_t mbox_sts[MBOX_REG_COUNT];
1307
1308        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1309        memset(&mbox_sts, 0, sizeof(mbox_sts));
1310
1311        mbox_cmd[0] = MBOX_CMD_READ_FLASH;
1312        mbox_cmd[1] = LSDW(dma_addr);
1313        mbox_cmd[2] = MSDW(dma_addr);
1314        mbox_cmd[3] = offset;
1315        mbox_cmd[4] = len;
1316
1317        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], &mbox_sts[0]) !=
1318            QLA_SUCCESS) {
1319                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
1320                    "status %04X %04X, offset %08x, len %08x\n", ha->host_no,
1321                    __func__, mbox_sts[0], mbox_sts[1], offset, len));
1322                return QLA_ERROR;
1323        }
1324        return QLA_SUCCESS;
1325}
1326
1327/**
1328 * qla4xxx_about_firmware - gets FW, iscsi draft and boot loader version
1329 * @ha: Pointer to host adapter structure.
1330 *
1331 * Retrieves the FW version, iSCSI draft version & bootloader version of HBA.
1332 * Mailboxes 2 & 3 may hold an address for data. Make sure that we write 0 to
1333 * those mailboxes, if unused.
1334 **/
1335int qla4xxx_about_firmware(struct scsi_qla_host *ha)
1336{
1337        struct about_fw_info *about_fw = NULL;
1338        dma_addr_t about_fw_dma;
1339        uint32_t mbox_cmd[MBOX_REG_COUNT];
1340        uint32_t mbox_sts[MBOX_REG_COUNT];
1341        int status = QLA_ERROR;
1342
1343        about_fw = dma_zalloc_coherent(&ha->pdev->dev,
1344                                       sizeof(struct about_fw_info),
1345                                       &about_fw_dma, GFP_KERNEL);
1346        if (!about_fw) {
1347                DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory "
1348                                  "for about_fw\n", __func__));
1349                return status;
1350        }
1351
1352        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1353        memset(&mbox_sts, 0, sizeof(mbox_sts));
1354
1355        mbox_cmd[0] = MBOX_CMD_ABOUT_FW;
1356        mbox_cmd[2] = LSDW(about_fw_dma);
1357        mbox_cmd[3] = MSDW(about_fw_dma);
1358        mbox_cmd[4] = sizeof(struct about_fw_info);
1359
1360        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
1361                                         &mbox_cmd[0], &mbox_sts[0]);
1362        if (status != QLA_SUCCESS) {
1363                DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_ABOUT_FW "
1364                                  "failed w/ status %04X\n", __func__,
1365                                  mbox_sts[0]));
1366                goto exit_about_fw;
1367        }
1368
1369        /* Save version information. */
1370        ha->fw_info.fw_major = le16_to_cpu(about_fw->fw_major);
1371        ha->fw_info.fw_minor = le16_to_cpu(about_fw->fw_minor);
1372        ha->fw_info.fw_patch = le16_to_cpu(about_fw->fw_patch);
1373        ha->fw_info.fw_build = le16_to_cpu(about_fw->fw_build);
1374        memcpy(ha->fw_info.fw_build_date, about_fw->fw_build_date,
1375               sizeof(about_fw->fw_build_date));
1376        memcpy(ha->fw_info.fw_build_time, about_fw->fw_build_time,
1377               sizeof(about_fw->fw_build_time));
1378        strcpy((char *)ha->fw_info.fw_build_user,
1379               skip_spaces((char *)about_fw->fw_build_user));
1380        ha->fw_info.fw_load_source = le16_to_cpu(about_fw->fw_load_source);
1381        ha->fw_info.iscsi_major = le16_to_cpu(about_fw->iscsi_major);
1382        ha->fw_info.iscsi_minor = le16_to_cpu(about_fw->iscsi_minor);
1383        ha->fw_info.bootload_major = le16_to_cpu(about_fw->bootload_major);
1384        ha->fw_info.bootload_minor = le16_to_cpu(about_fw->bootload_minor);
1385        ha->fw_info.bootload_patch = le16_to_cpu(about_fw->bootload_patch);
1386        ha->fw_info.bootload_build = le16_to_cpu(about_fw->bootload_build);
1387        strcpy((char *)ha->fw_info.extended_timestamp,
1388               skip_spaces((char *)about_fw->extended_timestamp));
1389
1390        ha->fw_uptime_secs = le32_to_cpu(mbox_sts[5]);
1391        ha->fw_uptime_msecs = le32_to_cpu(mbox_sts[6]);
1392        status = QLA_SUCCESS;
1393
1394exit_about_fw:
1395        dma_free_coherent(&ha->pdev->dev, sizeof(struct about_fw_info),
1396                          about_fw, about_fw_dma);
1397        return status;
1398}
1399
1400int qla4xxx_get_default_ddb(struct scsi_qla_host *ha, uint32_t options,
1401                            dma_addr_t dma_addr)
1402{
1403        uint32_t mbox_cmd[MBOX_REG_COUNT];
1404        uint32_t mbox_sts[MBOX_REG_COUNT];
1405
1406        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1407        memset(&mbox_sts, 0, sizeof(mbox_sts));
1408
1409        mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS;
1410        mbox_cmd[1] = options;
1411        mbox_cmd[2] = LSDW(dma_addr);
1412        mbox_cmd[3] = MSDW(dma_addr);
1413
1414        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
1415            QLA_SUCCESS) {
1416                DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
1417                     ha->host_no, __func__, mbox_sts[0]));
1418                return QLA_ERROR;
1419        }
1420        return QLA_SUCCESS;
1421}
1422
1423int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index,
1424                          uint32_t *mbx_sts)
1425{
1426        int status;
1427        uint32_t mbox_cmd[MBOX_REG_COUNT];
1428        uint32_t mbox_sts[MBOX_REG_COUNT];
1429
1430        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1431        memset(&mbox_sts, 0, sizeof(mbox_sts));
1432
1433        mbox_cmd[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY;
1434        mbox_cmd[1] = ddb_index;
1435
1436        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
1437                                         &mbox_sts[0]);
1438        if (status != QLA_SUCCESS) {
1439                DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
1440                                   __func__, mbox_sts[0]));
1441        }
1442
1443        *mbx_sts = mbox_sts[0];
1444        return status;
1445}
1446
1447int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index)
1448{
1449        int status;
1450        uint32_t mbox_cmd[MBOX_REG_COUNT];
1451        uint32_t mbox_sts[MBOX_REG_COUNT];
1452
1453        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1454        memset(&mbox_sts, 0, sizeof(mbox_sts));
1455
1456        mbox_cmd[0] = MBOX_CMD_CLEAR_DATABASE_ENTRY;
1457        mbox_cmd[1] = ddb_index;
1458
1459        status = qla4xxx_mailbox_command(ha, 2, 1, &mbox_cmd[0],
1460                                         &mbox_sts[0]);
1461        if (status != QLA_SUCCESS) {
1462                DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
1463                                   __func__, mbox_sts[0]));
1464        }
1465
1466        return status;
1467}
1468
1469int qla4xxx_set_flash(struct scsi_qla_host *ha, dma_addr_t dma_addr,
1470                      uint32_t offset, uint32_t length, uint32_t options)
1471{
1472        uint32_t mbox_cmd[MBOX_REG_COUNT];
1473        uint32_t mbox_sts[MBOX_REG_COUNT];
1474        int status = QLA_SUCCESS;
1475
1476        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1477        memset(&mbox_sts, 0, sizeof(mbox_sts));
1478
1479        mbox_cmd[0] = MBOX_CMD_WRITE_FLASH;
1480        mbox_cmd[1] = LSDW(dma_addr);
1481        mbox_cmd[2] = MSDW(dma_addr);
1482        mbox_cmd[3] = offset;
1483        mbox_cmd[4] = length;
1484        mbox_cmd[5] = options;
1485
1486        status = qla4xxx_mailbox_command(ha, 6, 2, &mbox_cmd[0], &mbox_sts[0]);
1487        if (status != QLA_SUCCESS) {
1488                DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_WRITE_FLASH "
1489                                  "failed w/ status %04X, mbx1 %04X\n",
1490                                  __func__, mbox_sts[0], mbox_sts[1]));
1491        }
1492        return status;
1493}
1494
1495int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha,
1496                            struct dev_db_entry *fw_ddb_entry,
1497                            dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index)
1498{
1499        uint32_t dev_db_start_offset = FLASH_OFFSET_DB_INFO;
1500        uint32_t dev_db_end_offset;
1501        int status = QLA_ERROR;
1502
1503        memset(fw_ddb_entry, 0, sizeof(*fw_ddb_entry));
1504
1505        dev_db_start_offset += (ddb_index * sizeof(*fw_ddb_entry));
1506        dev_db_end_offset = FLASH_OFFSET_DB_END;
1507
1508        if (dev_db_start_offset > dev_db_end_offset) {
1509                DEBUG2(ql4_printk(KERN_ERR, ha,
1510                                  "%s:Invalid DDB index %d", __func__,
1511                                  ddb_index));
1512                goto exit_bootdb_failed;
1513        }
1514
1515        if (qla4xxx_get_flash(ha, fw_ddb_entry_dma, dev_db_start_offset,
1516                              sizeof(*fw_ddb_entry)) != QLA_SUCCESS) {
1517                ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
1518                           "failed\n", ha->host_no, __func__);
1519                goto exit_bootdb_failed;
1520        }
1521
1522        if (fw_ddb_entry->cookie == DDB_VALID_COOKIE)
1523                status = QLA_SUCCESS;
1524
1525exit_bootdb_failed:
1526        return status;
1527}
1528
1529int qla4xxx_flashdb_by_index(struct scsi_qla_host *ha,
1530                             struct dev_db_entry *fw_ddb_entry,
1531                             dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index)
1532{
1533        uint32_t dev_db_start_offset;
1534        uint32_t dev_db_end_offset;
1535        int status = QLA_ERROR;
1536
1537        memset(fw_ddb_entry, 0, sizeof(*fw_ddb_entry));
1538
1539        if (is_qla40XX(ha)) {
1540                dev_db_start_offset = FLASH_OFFSET_DB_INFO;
1541                dev_db_end_offset = FLASH_OFFSET_DB_END;
1542        } else {
1543                dev_db_start_offset = FLASH_RAW_ACCESS_ADDR +
1544                                      (ha->hw.flt_region_ddb << 2);
1545                /* flt_ddb_size is DDB table size for both ports
1546                 * so divide it by 2 to calculate the offset for second port
1547                 */
1548                if (ha->port_num == 1)
1549                        dev_db_start_offset += (ha->hw.flt_ddb_size / 2);
1550
1551                dev_db_end_offset = dev_db_start_offset +
1552                                    (ha->hw.flt_ddb_size / 2);
1553        }
1554
1555        dev_db_start_offset += (ddb_index * sizeof(*fw_ddb_entry));
1556
1557        if (dev_db_start_offset > dev_db_end_offset) {
1558                DEBUG2(ql4_printk(KERN_ERR, ha,
1559                                  "%s:Invalid DDB index %d", __func__,
1560                                  ddb_index));
1561                goto exit_fdb_failed;
1562        }
1563
1564        if (qla4xxx_get_flash(ha, fw_ddb_entry_dma, dev_db_start_offset,
1565                              sizeof(*fw_ddb_entry)) != QLA_SUCCESS) {
1566                ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash failed\n",
1567                           ha->host_no, __func__);
1568                goto exit_fdb_failed;
1569        }
1570
1571        if (fw_ddb_entry->cookie == DDB_VALID_COOKIE)
1572                status = QLA_SUCCESS;
1573
1574exit_fdb_failed:
1575        return status;
1576}
1577
1578int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password,
1579                     uint16_t idx)
1580{
1581        int ret = 0;
1582        int rval = QLA_ERROR;
1583        uint32_t offset = 0, chap_size;
1584        struct ql4_chap_table *chap_table;
1585        dma_addr_t chap_dma;
1586
1587        chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
1588        if (chap_table == NULL)
1589                return -ENOMEM;
1590
1591        chap_size = sizeof(struct ql4_chap_table);
1592        memset(chap_table, 0, chap_size);
1593
1594        if (is_qla40XX(ha))
1595                offset = FLASH_CHAP_OFFSET | (idx * chap_size);
1596        else {
1597                offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2);
1598                /* flt_chap_size is CHAP table size for both ports
1599                 * so divide it by 2 to calculate the offset for second port
1600                 */
1601                if (ha->port_num == 1)
1602                        offset += (ha->hw.flt_chap_size / 2);
1603                offset += (idx * chap_size);
1604        }
1605
1606        rval = qla4xxx_get_flash(ha, chap_dma, offset, chap_size);
1607        if (rval != QLA_SUCCESS) {
1608                ret = -EINVAL;
1609                goto exit_get_chap;
1610        }
1611
1612        DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n",
1613                __le16_to_cpu(chap_table->cookie)));
1614
1615        if (__le16_to_cpu(chap_table->cookie) != CHAP_VALID_COOKIE) {
1616                ql4_printk(KERN_ERR, ha, "No valid chap entry found\n");
1617                goto exit_get_chap;
1618        }
1619
1620        strlcpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
1621        strlcpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
1622        chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE);
1623
1624exit_get_chap:
1625        dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma);
1626        return ret;
1627}
1628
1629/**
1630 * qla4xxx_set_chap - Make a chap entry at the given index
1631 * @ha: pointer to adapter structure
1632 * @username: CHAP username to set
1633 * @password: CHAP password to set
1634 * @idx: CHAP index at which to make the entry
1635 * @bidi: type of chap entry (chap_in or chap_out)
1636 *
1637 * Create chap entry at the given index with the information provided.
1638 *
1639 * Note: Caller should acquire the chap lock before getting here.
1640 **/
1641int qla4xxx_set_chap(struct scsi_qla_host *ha, char *username, char *password,
1642                     uint16_t idx, int bidi)
1643{
1644        int ret = 0;
1645        int rval = QLA_ERROR;
1646        uint32_t offset = 0;
1647        struct ql4_chap_table *chap_table;
1648        uint32_t chap_size = 0;
1649        dma_addr_t chap_dma;
1650
1651        chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
1652        if (chap_table == NULL) {
1653                ret =  -ENOMEM;
1654                goto exit_set_chap;
1655        }
1656
1657        memset(chap_table, 0, sizeof(struct ql4_chap_table));
1658        if (bidi)
1659                chap_table->flags |= BIT_6; /* peer */
1660        else
1661                chap_table->flags |= BIT_7; /* local */
1662        chap_table->secret_len = strlen(password);
1663        strncpy(chap_table->secret, password, MAX_CHAP_SECRET_LEN - 1);
1664        strncpy(chap_table->name, username, MAX_CHAP_NAME_LEN - 1);
1665        chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE);
1666
1667        if (is_qla40XX(ha)) {
1668                chap_size = MAX_CHAP_ENTRIES_40XX * sizeof(*chap_table);
1669                offset = FLASH_CHAP_OFFSET;
1670        } else { /* Single region contains CHAP info for both ports which is
1671                  * divided into half for each port.
1672                  */
1673                chap_size = ha->hw.flt_chap_size / 2;
1674                offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2);
1675                if (ha->port_num == 1)
1676                        offset += chap_size;
1677        }
1678
1679        offset += (idx * sizeof(struct ql4_chap_table));
1680        rval = qla4xxx_set_flash(ha, chap_dma, offset,
1681                                sizeof(struct ql4_chap_table),
1682                                FLASH_OPT_RMW_COMMIT);
1683
1684        if (rval == QLA_SUCCESS && ha->chap_list) {
1685                /* Update ha chap_list cache */
1686                memcpy((struct ql4_chap_table *)ha->chap_list + idx,
1687                       chap_table, sizeof(struct ql4_chap_table));
1688        }
1689        dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma);
1690        if (rval != QLA_SUCCESS)
1691                ret =  -EINVAL;
1692
1693exit_set_chap:
1694        return ret;
1695}
1696
1697
1698int qla4xxx_get_uni_chap_at_index(struct scsi_qla_host *ha, char *username,
1699                                  char *password, uint16_t chap_index)
1700{
1701        int rval = QLA_ERROR;
1702        struct ql4_chap_table *chap_table = NULL;
1703        int max_chap_entries;
1704
1705        if (!ha->chap_list) {
1706                ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n");
1707                rval = QLA_ERROR;
1708                goto exit_uni_chap;
1709        }
1710
1711        if (!username || !password) {
1712                ql4_printk(KERN_ERR, ha, "No memory for username & secret\n");
1713                rval = QLA_ERROR;
1714                goto exit_uni_chap;
1715        }
1716
1717        if (is_qla80XX(ha))
1718                max_chap_entries = (ha->hw.flt_chap_size / 2) /
1719                                   sizeof(struct ql4_chap_table);
1720        else
1721                max_chap_entries = MAX_CHAP_ENTRIES_40XX;
1722
1723        if (chap_index > max_chap_entries) {
1724                ql4_printk(KERN_ERR, ha, "Invalid Chap index\n");
1725                rval = QLA_ERROR;
1726                goto exit_uni_chap;
1727        }
1728
1729        mutex_lock(&ha->chap_sem);
1730        chap_table = (struct ql4_chap_table *)ha->chap_list + chap_index;
1731        if (chap_table->cookie != __constant_cpu_to_le16(CHAP_VALID_COOKIE)) {
1732                rval = QLA_ERROR;
1733                goto exit_unlock_uni_chap;
1734        }
1735
1736        if (!(chap_table->flags & BIT_7)) {
1737                ql4_printk(KERN_ERR, ha, "Unidirectional entry not set\n");
1738                rval = QLA_ERROR;
1739                goto exit_unlock_uni_chap;
1740        }
1741
1742        strlcpy(password, chap_table->secret, MAX_CHAP_SECRET_LEN);
1743        strlcpy(username, chap_table->name, MAX_CHAP_NAME_LEN);
1744
1745        rval = QLA_SUCCESS;
1746
1747exit_unlock_uni_chap:
1748        mutex_unlock(&ha->chap_sem);
1749exit_uni_chap:
1750        return rval;
1751}
1752
1753/**
1754 * qla4xxx_get_chap_index - Get chap index given username and secret
1755 * @ha: pointer to adapter structure
1756 * @username: CHAP username to be searched
1757 * @password: CHAP password to be searched
1758 * @bidi: Is this a BIDI CHAP
1759 * @chap_index: CHAP index to be returned
1760 *
1761 * Match the username and password in the chap_list, return the index if a
1762 * match is found. If a match is not found then add the entry in FLASH and
1763 * return the index at which entry is written in the FLASH.
1764 **/
1765int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username,
1766                           char *password, int bidi, uint16_t *chap_index)
1767{
1768        int i, rval;
1769        int free_index = -1;
1770        int found_index = 0;
1771        int max_chap_entries = 0;
1772        struct ql4_chap_table *chap_table;
1773
1774        if (is_qla80XX(ha))
1775                max_chap_entries = (ha->hw.flt_chap_size / 2) /
1776                                                sizeof(struct ql4_chap_table);
1777        else
1778                max_chap_entries = MAX_CHAP_ENTRIES_40XX;
1779
1780        if (!ha->chap_list) {
1781                ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n");
1782                return QLA_ERROR;
1783        }
1784
1785        if (!username || !password) {
1786                ql4_printk(KERN_ERR, ha, "Do not have username and psw\n");
1787                return QLA_ERROR;
1788        }
1789
1790        mutex_lock(&ha->chap_sem);
1791        for (i = 0; i < max_chap_entries; i++) {
1792                chap_table = (struct ql4_chap_table *)ha->chap_list + i;
1793                if (chap_table->cookie !=
1794                    __constant_cpu_to_le16(CHAP_VALID_COOKIE)) {
1795                        if (i > MAX_RESRV_CHAP_IDX && free_index == -1)
1796                                free_index = i;
1797                        continue;
1798                }
1799                if (bidi) {
1800                        if (chap_table->flags & BIT_7)
1801                                continue;
1802                } else {
1803                        if (chap_table->flags & BIT_6)
1804                                continue;
1805                }
1806                if (!strncmp(chap_table->secret, password,
1807                             MAX_CHAP_SECRET_LEN) &&
1808                    !strncmp(chap_table->name, username,
1809                             MAX_CHAP_NAME_LEN)) {
1810                        *chap_index = i;
1811                        found_index = 1;
1812                        break;
1813                }
1814        }
1815
1816        /* If chap entry is not present and a free index is available then
1817         * write the entry in flash
1818         */
1819        if (!found_index && free_index != -1) {
1820                rval = qla4xxx_set_chap(ha, username, password,
1821                                        free_index, bidi);
1822                if (!rval) {
1823                        *chap_index = free_index;
1824                        found_index = 1;
1825                }
1826        }
1827
1828        mutex_unlock(&ha->chap_sem);
1829
1830        if (found_index)
1831                return QLA_SUCCESS;
1832        return QLA_ERROR;
1833}
1834
1835int qla4xxx_conn_close_sess_logout(struct scsi_qla_host *ha,
1836                                   uint16_t fw_ddb_index,
1837                                   uint16_t connection_id,
1838                                   uint16_t option)
1839{
1840        uint32_t mbox_cmd[MBOX_REG_COUNT];
1841        uint32_t mbox_sts[MBOX_REG_COUNT];
1842        int status = QLA_SUCCESS;
1843
1844        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1845        memset(&mbox_sts, 0, sizeof(mbox_sts));
1846
1847        mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
1848        mbox_cmd[1] = fw_ddb_index;
1849        mbox_cmd[2] = connection_id;
1850        mbox_cmd[3] = option;
1851
1852        status = qla4xxx_mailbox_command(ha, 4, 2, &mbox_cmd[0], &mbox_sts[0]);
1853        if (status != QLA_SUCCESS) {
1854                DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_CONN_CLOSE "
1855                                  "option %04x failed w/ status %04X %04X\n",
1856                                  __func__, option, mbox_sts[0], mbox_sts[1]));
1857        }
1858        return status;
1859}
1860
1861/**
1862 * qla4_84xx_extend_idc_tmo - Extend IDC Timeout.
1863 * @ha: Pointer to host adapter structure.
1864 * @ext_tmo: idc timeout value
1865 *
1866 * Requests firmware to extend the idc timeout value.
1867 **/
1868static int qla4_84xx_extend_idc_tmo(struct scsi_qla_host *ha, uint32_t ext_tmo)
1869{
1870        uint32_t mbox_cmd[MBOX_REG_COUNT];
1871        uint32_t mbox_sts[MBOX_REG_COUNT];
1872        int status;
1873
1874        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1875        memset(&mbox_sts, 0, sizeof(mbox_sts));
1876        ext_tmo &= 0xf;
1877
1878        mbox_cmd[0] = MBOX_CMD_IDC_TIME_EXTEND;
1879        mbox_cmd[1] = ((ha->idc_info.request_desc & 0xfffff0ff) |
1880                       (ext_tmo << 8));         /* new timeout */
1881        mbox_cmd[2] = ha->idc_info.info1;
1882        mbox_cmd[3] = ha->idc_info.info2;
1883        mbox_cmd[4] = ha->idc_info.info3;
1884
1885        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
1886                                         mbox_cmd, mbox_sts);
1887        if (status != QLA_SUCCESS) {
1888                DEBUG2(ql4_printk(KERN_INFO, ha,
1889                                  "scsi%ld: %s: failed status %04X\n",
1890                                  ha->host_no, __func__, mbox_sts[0]));
1891                return QLA_ERROR;
1892        } else {
1893                ql4_printk(KERN_INFO, ha, "%s: IDC timeout extended by %d secs\n",
1894                           __func__, ext_tmo);
1895        }
1896
1897        return QLA_SUCCESS;
1898}
1899
1900int qla4xxx_disable_acb(struct scsi_qla_host *ha)
1901{
1902        uint32_t mbox_cmd[MBOX_REG_COUNT];
1903        uint32_t mbox_sts[MBOX_REG_COUNT];
1904        int status = QLA_SUCCESS;
1905
1906        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1907        memset(&mbox_sts, 0, sizeof(mbox_sts));
1908
1909        mbox_cmd[0] = MBOX_CMD_DISABLE_ACB;
1910
1911        status = qla4xxx_mailbox_command(ha, 8, 5, &mbox_cmd[0], &mbox_sts[0]);
1912        if (status != QLA_SUCCESS) {
1913                DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_DISABLE_ACB "
1914                                  "failed w/ status %04X %04X %04X", __func__,
1915                                  mbox_sts[0], mbox_sts[1], mbox_sts[2]));
1916        } else {
1917                if (is_qla8042(ha) &&
1918                    test_bit(DPC_POST_IDC_ACK, &ha->dpc_flags) &&
1919                    (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE)) {
1920                        /*
1921                         * Disable ACB mailbox command takes time to complete
1922                         * based on the total number of targets connected.
1923                         * For 512 targets, it took approximately 5 secs to
1924                         * complete. Setting the timeout value to 8, with the 3
1925                         * secs buffer.
1926                         */
1927                        qla4_84xx_extend_idc_tmo(ha, IDC_EXTEND_TOV);
1928                        if (!wait_for_completion_timeout(&ha->disable_acb_comp,
1929                                                         IDC_EXTEND_TOV * HZ)) {
1930                                ql4_printk(KERN_WARNING, ha, "%s: Disable ACB Completion not received\n",
1931                                           __func__);
1932                        }
1933                }
1934        }
1935        return status;
1936}
1937
1938int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
1939                    uint32_t acb_type, uint32_t len)
1940{
1941        uint32_t mbox_cmd[MBOX_REG_COUNT];
1942        uint32_t mbox_sts[MBOX_REG_COUNT];
1943        int status = QLA_SUCCESS;
1944
1945        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
1946        memset(&mbox_sts, 0, sizeof(mbox_sts));
1947
1948        mbox_cmd[0] = MBOX_CMD_GET_ACB;
1949        mbox_cmd[1] = acb_type;
1950        mbox_cmd[2] = LSDW(acb_dma);
1951        mbox_cmd[3] = MSDW(acb_dma);
1952        mbox_cmd[4] = len;
1953
1954        status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
1955        if (status != QLA_SUCCESS) {
1956                DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_GET_ACB "
1957                                  "failed w/ status %04X\n", __func__,
1958                                  mbox_sts[0]));
1959        }
1960        return status;
1961}
1962
1963int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
1964                    uint32_t *mbox_sts, dma_addr_t acb_dma)
1965{
1966        int status = QLA_SUCCESS;
1967
1968        memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
1969        memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
1970        mbox_cmd[0] = MBOX_CMD_SET_ACB;
1971        mbox_cmd[1] = 0; /* Primary ACB */
1972        mbox_cmd[2] = LSDW(acb_dma);
1973        mbox_cmd[3] = MSDW(acb_dma);
1974        mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
1975
1976        status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
1977        if (status != QLA_SUCCESS) {
1978                DEBUG2(ql4_printk(KERN_WARNING, ha,  "%s: MBOX_CMD_SET_ACB "
1979                                  "failed w/ status %04X\n", __func__,
1980                                  mbox_sts[0]));
1981        }
1982        return status;
1983}
1984
1985int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha,
1986                               struct ddb_entry *ddb_entry,
1987                               struct iscsi_cls_conn *cls_conn,
1988                               uint32_t *mbx_sts)
1989{
1990        struct dev_db_entry *fw_ddb_entry;
1991        struct iscsi_conn *conn;
1992        struct iscsi_session *sess;
1993        struct qla_conn *qla_conn;
1994        struct sockaddr *dst_addr;
1995        dma_addr_t fw_ddb_entry_dma;
1996        int status = QLA_SUCCESS;
1997        int rval = 0;
1998        struct sockaddr_in *addr;
1999        struct sockaddr_in6 *addr6;
2000        char *ip;
2001        uint16_t iscsi_opts = 0;
2002        uint32_t options = 0;
2003        uint16_t idx, *ptid;
2004
2005        fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
2006                                          &fw_ddb_entry_dma, GFP_KERNEL);
2007        if (!fw_ddb_entry) {
2008                DEBUG2(ql4_printk(KERN_ERR, ha,
2009                                  "%s: Unable to allocate dma buffer.\n",
2010                                  __func__));
2011                rval = -ENOMEM;
2012                goto exit_set_param_no_free;
2013        }
2014
2015        conn = cls_conn->dd_data;
2016        qla_conn = conn->dd_data;
2017        sess = conn->session;
2018        dst_addr = (struct sockaddr *)&qla_conn->qla_ep->dst_addr;
2019
2020        if (dst_addr->sa_family == AF_INET6)
2021                options |= IPV6_DEFAULT_DDB_ENTRY;
2022
2023        status = qla4xxx_get_default_ddb(ha, options, fw_ddb_entry_dma);
2024        if (status == QLA_ERROR) {
2025                rval = -EINVAL;
2026                goto exit_set_param;
2027        }
2028
2029        ptid = (uint16_t *)&fw_ddb_entry->isid[1];
2030        *ptid = cpu_to_le16((uint16_t)ddb_entry->sess->target_id);
2031
2032        DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%pmR]\n", fw_ddb_entry->isid));
2033
2034        iscsi_opts = le16_to_cpu(fw_ddb_entry->iscsi_options);
2035        memset(fw_ddb_entry->iscsi_alias, 0, sizeof(fw_ddb_entry->iscsi_alias));
2036
2037        memset(fw_ddb_entry->iscsi_name, 0, sizeof(fw_ddb_entry->iscsi_name));
2038
2039        if (sess->targetname != NULL) {
2040                memcpy(fw_ddb_entry->iscsi_name, sess->targetname,
2041                       min(strlen(sess->targetname),
2042                       sizeof(fw_ddb_entry->iscsi_name)));
2043        }
2044
2045        memset(fw_ddb_entry->ip_addr, 0, sizeof(fw_ddb_entry->ip_addr));
2046        memset(fw_ddb_entry->tgt_addr, 0, sizeof(fw_ddb_entry->tgt_addr));
2047
2048        fw_ddb_entry->options =  DDB_OPT_TARGET | DDB_OPT_AUTO_SENDTGTS_DISABLE;
2049
2050        if (dst_addr->sa_family == AF_INET) {
2051                addr = (struct sockaddr_in *)dst_addr;
2052                ip = (char *)&addr->sin_addr;
2053                memcpy(fw_ddb_entry->ip_addr, ip, IP_ADDR_LEN);
2054                fw_ddb_entry->port = cpu_to_le16(ntohs(addr->sin_port));
2055                DEBUG2(ql4_printk(KERN_INFO, ha,
2056                                  "%s: Destination Address [%pI4]: index [%d]\n",
2057                                   __func__, fw_ddb_entry->ip_addr,
2058                                  ddb_entry->fw_ddb_index));
2059        } else if (dst_addr->sa_family == AF_INET6) {
2060                addr6 = (struct sockaddr_in6 *)dst_addr;
2061                ip = (char *)&addr6->sin6_addr;
2062                memcpy(fw_ddb_entry->ip_addr, ip, IPv6_ADDR_LEN);
2063                fw_ddb_entry->port = cpu_to_le16(ntohs(addr6->sin6_port));
2064                fw_ddb_entry->options |= DDB_OPT_IPV6_DEVICE;
2065                DEBUG2(ql4_printk(KERN_INFO, ha,
2066                                  "%s: Destination Address [%pI6]: index [%d]\n",
2067                                   __func__, fw_ddb_entry->ip_addr,
2068                                  ddb_entry->fw_ddb_index));
2069        } else {
2070                ql4_printk(KERN_ERR, ha,
2071                           "%s: Failed to get IP Address\n",
2072                           __func__);
2073                rval = -EINVAL;
2074                goto exit_set_param;
2075        }
2076
2077        /* CHAP */
2078        if (sess->username != NULL && sess->password != NULL) {
2079                if (strlen(sess->username) && strlen(sess->password)) {
2080                        iscsi_opts |= BIT_7;
2081
2082                        rval = qla4xxx_get_chap_index(ha, sess->username,
2083                                                sess->password,
2084                                                LOCAL_CHAP, &idx);
2085                        if (rval)
2086                                goto exit_set_param;
2087
2088                        fw_ddb_entry->chap_tbl_idx = cpu_to_le16(idx);
2089                }
2090        }
2091
2092        if (sess->username_in != NULL && sess->password_in != NULL) {
2093                /* Check if BIDI CHAP */
2094                if (strlen(sess->username_in) && strlen(sess->password_in)) {
2095                        iscsi_opts |= BIT_4;
2096
2097                        rval = qla4xxx_get_chap_index(ha, sess->username_in,
2098                                                      sess->password_in,
2099                                                      BIDI_CHAP, &idx);
2100                        if (rval)
2101                                goto exit_set_param;
2102                }
2103        }
2104
2105        if (sess->initial_r2t_en)
2106                iscsi_opts |= BIT_10;
2107
2108        if (sess->imm_data_en)
2109                iscsi_opts |= BIT_11;
2110
2111        fw_ddb_entry->iscsi_options = cpu_to_le16(iscsi_opts);
2112
2113        if (conn->max_recv_dlength)
2114                fw_ddb_entry->iscsi_max_rcv_data_seg_len =
2115                  __constant_cpu_to_le16((conn->max_recv_dlength / BYTE_UNITS));
2116
2117        if (sess->max_r2t)
2118                fw_ddb_entry->iscsi_max_outsnd_r2t = cpu_to_le16(sess->max_r2t);
2119
2120        if (sess->first_burst)
2121                fw_ddb_entry->iscsi_first_burst_len =
2122                       __constant_cpu_to_le16((sess->first_burst / BYTE_UNITS));
2123
2124        if (sess->max_burst)
2125                fw_ddb_entry->iscsi_max_burst_len =
2126                        __constant_cpu_to_le16((sess->max_burst / BYTE_UNITS));
2127
2128        if (sess->time2wait)
2129                fw_ddb_entry->iscsi_def_time2wait =
2130                        cpu_to_le16(sess->time2wait);
2131
2132        if (sess->time2retain)
2133                fw_ddb_entry->iscsi_def_time2retain =
2134                        cpu_to_le16(sess->time2retain);
2135
2136        status = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index,
2137                                       fw_ddb_entry_dma, mbx_sts);
2138
2139        if (status != QLA_SUCCESS)
2140                rval = -EINVAL;
2141exit_set_param:
2142        dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
2143                          fw_ddb_entry, fw_ddb_entry_dma);
2144exit_set_param_no_free:
2145        return rval;
2146}
2147
2148int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
2149                          uint16_t stats_size, dma_addr_t stats_dma)
2150{
2151        int status = QLA_SUCCESS;
2152        uint32_t mbox_cmd[MBOX_REG_COUNT];
2153        uint32_t mbox_sts[MBOX_REG_COUNT];
2154
2155        memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
2156        memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
2157        mbox_cmd[0] = MBOX_CMD_GET_MANAGEMENT_DATA;
2158        mbox_cmd[1] = fw_ddb_index;
2159        mbox_cmd[2] = LSDW(stats_dma);
2160        mbox_cmd[3] = MSDW(stats_dma);
2161        mbox_cmd[4] = stats_size;
2162
2163        status = qla4xxx_mailbox_command(ha, 5, 1, &mbox_cmd[0], &mbox_sts[0]);
2164        if (status != QLA_SUCCESS) {
2165                DEBUG2(ql4_printk(KERN_WARNING, ha,
2166                                  "%s: MBOX_CMD_GET_MANAGEMENT_DATA "
2167                                  "failed w/ status %04X\n", __func__,
2168                                  mbox_sts[0]));
2169        }
2170        return status;
2171}
2172
2173int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
2174                         uint32_t ip_idx, uint32_t *sts)
2175{
2176        uint32_t mbox_cmd[MBOX_REG_COUNT];
2177        uint32_t mbox_sts[MBOX_REG_COUNT];
2178        int status = QLA_SUCCESS;
2179
2180        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2181        memset(&mbox_sts, 0, sizeof(mbox_sts));
2182        mbox_cmd[0] = MBOX_CMD_GET_IP_ADDR_STATE;
2183        mbox_cmd[1] = acb_idx;
2184        mbox_cmd[2] = ip_idx;
2185
2186        status = qla4xxx_mailbox_command(ha, 3, 8, &mbox_cmd[0], &mbox_sts[0]);
2187        if (status != QLA_SUCCESS) {
2188                DEBUG2(ql4_printk(KERN_WARNING, ha,  "%s: "
2189                                  "MBOX_CMD_GET_IP_ADDR_STATE failed w/ "
2190                                  "status %04X\n", __func__, mbox_sts[0]));
2191        }
2192        memcpy(sts, mbox_sts, sizeof(mbox_sts));
2193        return status;
2194}
2195
2196int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
2197                      uint32_t offset, uint32_t size)
2198{
2199        int status = QLA_SUCCESS;
2200        uint32_t mbox_cmd[MBOX_REG_COUNT];
2201        uint32_t mbox_sts[MBOX_REG_COUNT];
2202
2203        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2204        memset(&mbox_sts, 0, sizeof(mbox_sts));
2205
2206        mbox_cmd[0] = MBOX_CMD_GET_NVRAM;
2207        mbox_cmd[1] = LSDW(nvram_dma);
2208        mbox_cmd[2] = MSDW(nvram_dma);
2209        mbox_cmd[3] = offset;
2210        mbox_cmd[4] = size;
2211
2212        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
2213                                         &mbox_sts[0]);
2214        if (status != QLA_SUCCESS) {
2215                DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
2216                                  "status %04X\n", ha->host_no, __func__,
2217                                  mbox_sts[0]));
2218        }
2219        return status;
2220}
2221
2222int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
2223                      uint32_t offset, uint32_t size)
2224{
2225        int status = QLA_SUCCESS;
2226        uint32_t mbox_cmd[MBOX_REG_COUNT];
2227        uint32_t mbox_sts[MBOX_REG_COUNT];
2228
2229        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2230        memset(&mbox_sts, 0, sizeof(mbox_sts));
2231
2232        mbox_cmd[0] = MBOX_CMD_SET_NVRAM;
2233        mbox_cmd[1] = LSDW(nvram_dma);
2234        mbox_cmd[2] = MSDW(nvram_dma);
2235        mbox_cmd[3] = offset;
2236        mbox_cmd[4] = size;
2237
2238        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
2239                                         &mbox_sts[0]);
2240        if (status != QLA_SUCCESS) {
2241                DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
2242                                  "status %04X\n", ha->host_no, __func__,
2243                                  mbox_sts[0]));
2244        }
2245        return status;
2246}
2247
2248int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
2249                                     uint32_t region, uint32_t field0,
2250                                     uint32_t field1)
2251{
2252        int status = QLA_SUCCESS;
2253        uint32_t mbox_cmd[MBOX_REG_COUNT];
2254        uint32_t mbox_sts[MBOX_REG_COUNT];
2255
2256        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2257        memset(&mbox_sts, 0, sizeof(mbox_sts));
2258
2259        mbox_cmd[0] = MBOX_CMD_RESTORE_FACTORY_DEFAULTS;
2260        mbox_cmd[3] = region;
2261        mbox_cmd[4] = field0;
2262        mbox_cmd[5] = field1;
2263
2264        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0],
2265                                         &mbox_sts[0]);
2266        if (status != QLA_SUCCESS) {
2267                DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
2268                                  "status %04X\n", ha->host_no, __func__,
2269                                  mbox_sts[0]));
2270        }
2271        return status;
2272}
2273
2274/**
2275 * qla4_8xxx_set_param - set driver version in firmware.
2276 * @ha: Pointer to host adapter structure.
2277 * @param: Parameter to set i.e driver version
2278 **/
2279int qla4_8xxx_set_param(struct scsi_qla_host *ha, int param)
2280{
2281        uint32_t mbox_cmd[MBOX_REG_COUNT];
2282        uint32_t mbox_sts[MBOX_REG_COUNT];
2283        uint32_t status;
2284
2285        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2286        memset(&mbox_sts, 0, sizeof(mbox_sts));
2287
2288        mbox_cmd[0] = MBOX_CMD_SET_PARAM;
2289        if (param == SET_DRVR_VERSION) {
2290                mbox_cmd[1] = SET_DRVR_VERSION;
2291                strncpy((char *)&mbox_cmd[2], QLA4XXX_DRIVER_VERSION,
2292                        MAX_DRVR_VER_LEN - 1);
2293        } else {
2294                ql4_printk(KERN_ERR, ha, "%s: invalid parameter 0x%x\n",
2295                           __func__, param);
2296                status = QLA_ERROR;
2297                goto exit_set_param;
2298        }
2299
2300        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, mbox_cmd,
2301                                         mbox_sts);
2302        if (status == QLA_ERROR)
2303                ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
2304                           __func__, mbox_sts[0]);
2305
2306exit_set_param:
2307        return status;
2308}
2309
2310/**
2311 * qla4_83xx_post_idc_ack - post IDC ACK
2312 * @ha: Pointer to host adapter structure.
2313 *
2314 * Posts IDC ACK for IDC Request Notification AEN.
2315 **/
2316int qla4_83xx_post_idc_ack(struct scsi_qla_host *ha)
2317{
2318        uint32_t mbox_cmd[MBOX_REG_COUNT];
2319        uint32_t mbox_sts[MBOX_REG_COUNT];
2320        int status;
2321
2322        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2323        memset(&mbox_sts, 0, sizeof(mbox_sts));
2324
2325        mbox_cmd[0] = MBOX_CMD_IDC_ACK;
2326        mbox_cmd[1] = ha->idc_info.request_desc;
2327        mbox_cmd[2] = ha->idc_info.info1;
2328        mbox_cmd[3] = ha->idc_info.info2;
2329        mbox_cmd[4] = ha->idc_info.info3;
2330
2331        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
2332                                         mbox_cmd, mbox_sts);
2333        if (status == QLA_ERROR)
2334                ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
2335                           mbox_sts[0]);
2336        else
2337               ql4_printk(KERN_INFO, ha, "%s: IDC ACK posted\n", __func__);
2338
2339        return status;
2340}
2341
2342int qla4_84xx_config_acb(struct scsi_qla_host *ha, int acb_config)
2343{
2344        uint32_t mbox_cmd[MBOX_REG_COUNT];
2345        uint32_t mbox_sts[MBOX_REG_COUNT];
2346        struct addr_ctrl_blk *acb = NULL;
2347        uint32_t acb_len = sizeof(struct addr_ctrl_blk);
2348        int rval = QLA_SUCCESS;
2349        dma_addr_t acb_dma;
2350
2351        acb = dma_alloc_coherent(&ha->pdev->dev,
2352                                 sizeof(struct addr_ctrl_blk),
2353                                 &acb_dma, GFP_KERNEL);
2354        if (!acb) {
2355                ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n", __func__);
2356                rval = QLA_ERROR;
2357                goto exit_config_acb;
2358        }
2359        memset(acb, 0, acb_len);
2360
2361        switch (acb_config) {
2362        case ACB_CONFIG_DISABLE:
2363                rval = qla4xxx_get_acb(ha, acb_dma, 0, acb_len);
2364                if (rval != QLA_SUCCESS)
2365                        goto exit_free_acb;
2366
2367                rval = qla4xxx_disable_acb(ha);
2368                if (rval != QLA_SUCCESS)
2369                        goto exit_free_acb;
2370
2371                if (!ha->saved_acb)
2372                        ha->saved_acb = kzalloc(acb_len, GFP_KERNEL);
2373
2374                if (!ha->saved_acb) {
2375                        ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n",
2376                                   __func__);
2377                        rval = QLA_ERROR;
2378                        goto exit_free_acb;
2379                }
2380                memcpy(ha->saved_acb, acb, acb_len);
2381                break;
2382        case ACB_CONFIG_SET:
2383
2384                if (!ha->saved_acb) {
2385                        ql4_printk(KERN_ERR, ha, "%s: Can't set ACB, Saved ACB not available\n",
2386                                   __func__);
2387                        rval = QLA_ERROR;
2388                        goto exit_free_acb;
2389                }
2390
2391                memcpy(acb, ha->saved_acb, acb_len);
2392
2393                rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], acb_dma);
2394                if (rval != QLA_SUCCESS)
2395                        goto exit_free_acb;
2396
2397                break;
2398        default:
2399                ql4_printk(KERN_ERR, ha, "%s: Invalid ACB Configuration\n",
2400                           __func__);
2401        }
2402
2403exit_free_acb:
2404        dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), acb,
2405                          acb_dma);
2406exit_config_acb:
2407        if ((acb_config == ACB_CONFIG_SET) && ha->saved_acb) {
2408                kfree(ha->saved_acb);
2409                ha->saved_acb = NULL;
2410        }
2411        DEBUG2(ql4_printk(KERN_INFO, ha,
2412                          "%s %s\n", __func__,
2413                          rval == QLA_SUCCESS ? "SUCCEEDED" : "FAILED"));
2414        return rval;
2415}
2416
2417int qla4_83xx_get_port_config(struct scsi_qla_host *ha, uint32_t *config)
2418{
2419        uint32_t mbox_cmd[MBOX_REG_COUNT];
2420        uint32_t mbox_sts[MBOX_REG_COUNT];
2421        int status;
2422
2423        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2424        memset(&mbox_sts, 0, sizeof(mbox_sts));
2425
2426        mbox_cmd[0] = MBOX_CMD_GET_PORT_CONFIG;
2427
2428        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
2429                                         mbox_cmd, mbox_sts);
2430        if (status == QLA_SUCCESS)
2431                *config = mbox_sts[1];
2432        else
2433                ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
2434                           mbox_sts[0]);
2435
2436        return status;
2437}
2438
2439int qla4_83xx_set_port_config(struct scsi_qla_host *ha, uint32_t *config)
2440{
2441        uint32_t mbox_cmd[MBOX_REG_COUNT];
2442        uint32_t mbox_sts[MBOX_REG_COUNT];
2443        int status;
2444
2445        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
2446        memset(&mbox_sts, 0, sizeof(mbox_sts));
2447
2448        mbox_cmd[0] = MBOX_CMD_SET_PORT_CONFIG;
2449        mbox_cmd[1] = *config;
2450
2451        status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
2452                                mbox_cmd, mbox_sts);
2453        if (status != QLA_SUCCESS)
2454                ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
2455                           mbox_sts[0]);
2456
2457        return status;
2458}
2459