LXR linux/include/linux/usb/chipidea.h

   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * Platform data for the chipidea USB dual role controller
   4 */
   5
   6#ifndef __LINUX_USB_CHIPIDEA_H
   7#define __LINUX_USB_CHIPIDEA_H
   8
   9#include <linux/extcon.h>
  10#include <linux/usb/otg.h>
  11
  12struct ci_hdrc;
  13
  14/**
  15 * struct ci_hdrc_cable - structure for external connector cable state tracking
  16 * @connected: true if cable is connected, false otherwise
  17 * @changed: set to true when extcon event happen
  18 * @enabled: set to true if we've enabled the vbus or id interrupt
  19 * @edev: device which generate events
  20 * @ci: driver state of the chipidea device
  21 * @nb: hold event notification callback
  22 * @conn: used for notification registration
  23 */
  24struct ci_hdrc_cable {
  25        bool                            connected;
  26        bool                            changed;
  27        bool                            enabled;
  28        struct extcon_dev               *edev;
  29        struct ci_hdrc                  *ci;
  30        struct notifier_block           nb;
  31};
  32
  33struct ci_hdrc_platform_data {
  34        const char      *name;
  35        /* offset of the capability registers */
  36        uintptr_t        capoffset;
  37        unsigned         power_budget;
  38        struct phy      *phy;
  39        /* old usb_phy interface */
  40        struct usb_phy  *usb_phy;
  41        enum usb_phy_interface phy_mode;
  42        unsigned long    flags;
  43#define CI_HDRC_REGS_SHARED             BIT(0)
  44#define CI_HDRC_DISABLE_DEVICE_STREAMING        BIT(1)
  45#define CI_HDRC_SUPPORTS_RUNTIME_PM     BIT(2)
  46#define CI_HDRC_DISABLE_HOST_STREAMING  BIT(3)
  47#define CI_HDRC_DISABLE_STREAMING (CI_HDRC_DISABLE_DEVICE_STREAMING |   \
  48                CI_HDRC_DISABLE_HOST_STREAMING)
  49        /*
  50         * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1,
  51         * but otg is not supported (no register otgsc).
  52         */
  53#define CI_HDRC_DUAL_ROLE_NOT_OTG       BIT(4)
  54#define CI_HDRC_IMX28_WRITE_FIX         BIT(5)
  55#define CI_HDRC_FORCE_FULLSPEED         BIT(6)
  56#define CI_HDRC_TURN_VBUS_EARLY_ON      BIT(7)
  57#define CI_HDRC_SET_NON_ZERO_TTHA       BIT(8)
  58#define CI_HDRC_OVERRIDE_AHB_BURST      BIT(9)
  59#define CI_HDRC_OVERRIDE_TX_BURST       BIT(10)
  60#define CI_HDRC_OVERRIDE_RX_BURST       BIT(11)
  61#define CI_HDRC_OVERRIDE_PHY_CONTROL    BIT(12) /* Glue layer manages phy */
  62#define CI_HDRC_REQUIRES_ALIGNED_DMA    BIT(13)
  63        enum usb_dr_mode        dr_mode;
  64#define CI_HDRC_CONTROLLER_RESET_EVENT          0
  65#define CI_HDRC_CONTROLLER_STOPPED_EVENT        1
  66        int     (*notify_event) (struct ci_hdrc *ci, unsigned event);
  67        struct regulator        *reg_vbus;
  68        struct usb_otg_caps     ci_otg_caps;
  69        bool                    tpl_support;
  70        /* interrupt threshold setting */
  71        u32                     itc_setting;
  72        u32                     ahb_burst_config;
  73        u32                     tx_burst_size;
  74        u32                     rx_burst_size;
  75
  76        /* VBUS and ID signal state tracking, using extcon framework */
  77        struct ci_hdrc_cable            vbus_extcon;
  78        struct ci_hdrc_cable            id_extcon;
  79        u32                     phy_clkgate_delay_us;
  80};
  81
  82/* Default offset of capability registers */
  83#define DEF_CAPOFFSET           0x100
  84
  85/* Add ci hdrc device */
  86struct platform_device *ci_hdrc_add_device(struct device *dev,
  87                        struct resource *res, int nres,
  88                        struct ci_hdrc_platform_data *platdata);
  89/* Remove ci hdrc device */
  90void ci_hdrc_remove_device(struct platform_device *pdev);
  91
  92#endif
  93