linux/arch/arm/mach-ep93xx/core.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-ep93xx/core.c
   3 * Core routines for Cirrus EP93xx chips.
   4 *
   5 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
   6 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
   7 *
   8 * Thanks go to Michael Burian and Ray Lehtiniemi for their key
   9 * role in the ep93xx linux community.
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License as published by
  13 * the Free Software Foundation; either version 2 of the License, or (at
  14 * your option) any later version.
  15 */
  16
  17#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
  18
  19#include <linux/kernel.h>
  20#include <linux/init.h>
  21#include <linux/platform_device.h>
  22#include <linux/interrupt.h>
  23#include <linux/dma-mapping.h>
  24#include <linux/sys_soc.h>
  25#include <linux/irq.h>
  26#include <linux/io.h>
  27#include <linux/gpio.h>
  28#include <linux/leds.h>
  29#include <linux/termios.h>
  30#include <linux/amba/bus.h>
  31#include <linux/amba/serial.h>
  32#include <linux/mtd/physmap.h>
  33#include <linux/i2c.h>
  34#include <linux/gpio/machine.h>
  35#include <linux/spi/spi.h>
  36#include <linux/export.h>
  37#include <linux/irqchip/arm-vic.h>
  38#include <linux/reboot.h>
  39#include <linux/usb/ohci_pdriver.h>
  40#include <linux/random.h>
  41
  42#include <mach/hardware.h>
  43#include <linux/platform_data/video-ep93xx.h>
  44#include <linux/platform_data/keypad-ep93xx.h>
  45#include <linux/platform_data/spi-ep93xx.h>
  46#include <mach/gpio-ep93xx.h>
  47
  48#include <asm/mach/arch.h>
  49#include <asm/mach/map.h>
  50
  51#include "soc.h"
  52
  53/*************************************************************************
  54 * Static I/O mappings that are needed for all EP93xx platforms
  55 *************************************************************************/
  56static struct map_desc ep93xx_io_desc[] __initdata = {
  57        {
  58                .virtual        = EP93XX_AHB_VIRT_BASE,
  59                .pfn            = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
  60                .length         = EP93XX_AHB_SIZE,
  61                .type           = MT_DEVICE,
  62        }, {
  63                .virtual        = EP93XX_APB_VIRT_BASE,
  64                .pfn            = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
  65                .length         = EP93XX_APB_SIZE,
  66                .type           = MT_DEVICE,
  67        },
  68};
  69
  70void __init ep93xx_map_io(void)
  71{
  72        iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
  73}
  74
  75/*************************************************************************
  76 * EP93xx IRQ handling
  77 *************************************************************************/
  78void __init ep93xx_init_irq(void)
  79{
  80        vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
  81        vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
  82}
  83
  84
  85/*************************************************************************
  86 * EP93xx System Controller Software Locked register handling
  87 *************************************************************************/
  88
  89/*
  90 * syscon_swlock prevents anything else from writing to the syscon
  91 * block while a software locked register is being written.
  92 */
  93static DEFINE_SPINLOCK(syscon_swlock);
  94
  95void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
  96{
  97        unsigned long flags;
  98
  99        spin_lock_irqsave(&syscon_swlock, flags);
 100
 101        __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 102        __raw_writel(val, reg);
 103
 104        spin_unlock_irqrestore(&syscon_swlock, flags);
 105}
 106
 107void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 108{
 109        unsigned long flags;
 110        unsigned int val;
 111
 112        spin_lock_irqsave(&syscon_swlock, flags);
 113
 114        val = __raw_readl(EP93XX_SYSCON_DEVCFG);
 115        val &= ~clear_bits;
 116        val |= set_bits;
 117        __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 118        __raw_writel(val, EP93XX_SYSCON_DEVCFG);
 119
 120        spin_unlock_irqrestore(&syscon_swlock, flags);
 121}
 122
 123/**
 124 * ep93xx_chip_revision() - returns the EP93xx chip revision
 125 *
 126 * See <mach/platform.h> for more information.
 127 */
 128unsigned int ep93xx_chip_revision(void)
 129{
 130        unsigned int v;
 131
 132        v = __raw_readl(EP93XX_SYSCON_SYSCFG);
 133        v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
 134        v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
 135        return v;
 136}
 137EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
 138
 139/*************************************************************************
 140 * EP93xx GPIO
 141 *************************************************************************/
 142static struct resource ep93xx_gpio_resource[] = {
 143        DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc),
 144};
 145
 146static struct platform_device ep93xx_gpio_device = {
 147        .name           = "gpio-ep93xx",
 148        .id             = -1,
 149        .num_resources  = ARRAY_SIZE(ep93xx_gpio_resource),
 150        .resource       = ep93xx_gpio_resource,
 151};
 152
 153/*************************************************************************
 154 * EP93xx peripheral handling
 155 *************************************************************************/
 156#define EP93XX_UART_MCR_OFFSET          (0x0100)
 157
 158static void ep93xx_uart_set_mctrl(struct amba_device *dev,
 159                                  void __iomem *base, unsigned int mctrl)
 160{
 161        unsigned int mcr;
 162
 163        mcr = 0;
 164        if (mctrl & TIOCM_RTS)
 165                mcr |= 2;
 166        if (mctrl & TIOCM_DTR)
 167                mcr |= 1;
 168
 169        __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
 170}
 171
 172static struct amba_pl010_data ep93xx_uart_data = {
 173        .set_mctrl      = ep93xx_uart_set_mctrl,
 174};
 175
 176static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
 177        { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 178
 179static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
 180        { IRQ_EP93XX_UART2 }, NULL);
 181
 182static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
 183        { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
 184
 185static struct resource ep93xx_rtc_resource[] = {
 186        DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
 187};
 188
 189static struct platform_device ep93xx_rtc_device = {
 190        .name           = "ep93xx-rtc",
 191        .id             = -1,
 192        .num_resources  = ARRAY_SIZE(ep93xx_rtc_resource),
 193        .resource       = ep93xx_rtc_resource,
 194};
 195
 196/*************************************************************************
 197 * EP93xx OHCI USB Host
 198 *************************************************************************/
 199
 200static struct clk *ep93xx_ohci_host_clock;
 201
 202static int ep93xx_ohci_power_on(struct platform_device *pdev)
 203{
 204        if (!ep93xx_ohci_host_clock) {
 205                ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
 206                if (IS_ERR(ep93xx_ohci_host_clock))
 207                        return PTR_ERR(ep93xx_ohci_host_clock);
 208        }
 209
 210        return clk_enable(ep93xx_ohci_host_clock);
 211}
 212
 213static void ep93xx_ohci_power_off(struct platform_device *pdev)
 214{
 215        clk_disable(ep93xx_ohci_host_clock);
 216}
 217
 218static struct usb_ohci_pdata ep93xx_ohci_pdata = {
 219        .power_on       = ep93xx_ohci_power_on,
 220        .power_off      = ep93xx_ohci_power_off,
 221        .power_suspend  = ep93xx_ohci_power_off,
 222};
 223
 224static struct resource ep93xx_ohci_resources[] = {
 225        DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
 226        DEFINE_RES_IRQ(IRQ_EP93XX_USB),
 227};
 228
 229static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
 230
 231static struct platform_device ep93xx_ohci_device = {
 232        .name           = "ohci-platform",
 233        .id             = -1,
 234        .num_resources  = ARRAY_SIZE(ep93xx_ohci_resources),
 235        .resource       = ep93xx_ohci_resources,
 236        .dev            = {
 237                .dma_mask               = &ep93xx_ohci_dma_mask,
 238                .coherent_dma_mask      = DMA_BIT_MASK(32),
 239                .platform_data          = &ep93xx_ohci_pdata,
 240        },
 241};
 242
 243/*************************************************************************
 244 * EP93xx physmap'ed flash
 245 *************************************************************************/
 246static struct physmap_flash_data ep93xx_flash_data;
 247
 248static struct resource ep93xx_flash_resource = {
 249        .flags          = IORESOURCE_MEM,
 250};
 251
 252static struct platform_device ep93xx_flash = {
 253        .name           = "physmap-flash",
 254        .id             = 0,
 255        .dev            = {
 256                .platform_data  = &ep93xx_flash_data,
 257        },
 258        .num_resources  = 1,
 259        .resource       = &ep93xx_flash_resource,
 260};
 261
 262/**
 263 * ep93xx_register_flash() - Register the external flash device.
 264 * @width:      bank width in octets
 265 * @start:      resource start address
 266 * @size:       resource size
 267 */
 268void __init ep93xx_register_flash(unsigned int width,
 269                                  resource_size_t start, resource_size_t size)
 270{
 271        ep93xx_flash_data.width         = width;
 272
 273        ep93xx_flash_resource.start     = start;
 274        ep93xx_flash_resource.end       = start + size - 1;
 275
 276        platform_device_register(&ep93xx_flash);
 277}
 278
 279
 280/*************************************************************************
 281 * EP93xx ethernet peripheral handling
 282 *************************************************************************/
 283static struct ep93xx_eth_data ep93xx_eth_data;
 284
 285static struct resource ep93xx_eth_resource[] = {
 286        DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
 287        DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET),
 288};
 289
 290static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
 291
 292static struct platform_device ep93xx_eth_device = {
 293        .name           = "ep93xx-eth",
 294        .id             = -1,
 295        .dev            = {
 296                .platform_data          = &ep93xx_eth_data,
 297                .coherent_dma_mask      = DMA_BIT_MASK(32),
 298                .dma_mask               = &ep93xx_eth_dma_mask,
 299        },
 300        .num_resources  = ARRAY_SIZE(ep93xx_eth_resource),
 301        .resource       = ep93xx_eth_resource,
 302};
 303
 304/**
 305 * ep93xx_register_eth - Register the built-in ethernet platform device.
 306 * @data:       platform specific ethernet configuration (__initdata)
 307 * @copy_addr:  flag indicating that the MAC address should be copied
 308 *              from the IndAd registers (as programmed by the bootloader)
 309 */
 310void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 311{
 312        if (copy_addr)
 313                memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
 314
 315        ep93xx_eth_data = *data;
 316        platform_device_register(&ep93xx_eth_device);
 317}
 318
 319
 320/*************************************************************************
 321 * EP93xx i2c peripheral handling
 322 *************************************************************************/
 323
 324/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
 325static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
 326        .dev_id         = "i2c-gpio.0",
 327        .table          = {
 328                /* Use local offsets on gpiochip/port "G" */
 329                GPIO_LOOKUP_IDX("G", 1, NULL, 0,
 330                                GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 331                GPIO_LOOKUP_IDX("G", 0, NULL, 1,
 332                                GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 333        },
 334};
 335
 336static struct platform_device ep93xx_i2c_device = {
 337        .name           = "i2c-gpio",
 338        .id             = 0,
 339        .dev            = {
 340                .platform_data  = NULL,
 341        },
 342};
 343
 344/**
 345 * ep93xx_register_i2c - Register the i2c platform device.
 346 * @devices:    platform specific i2c bus device information (__initdata)
 347 * @num:        the number of devices on the i2c bus
 348 */
 349void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
 350{
 351        /*
 352         * FIXME: this just sets the two pins as non-opendrain, as no
 353         * platforms tries to do that anyway. Flag the applicable lines
 354         * as open drain in the GPIO_LOOKUP above and the driver or
 355         * gpiolib will handle open drain/open drain emulation as need
 356         * be. Right now i2c-gpio emulates open drain which is not
 357         * optimal.
 358         */
 359        __raw_writel((0 << 1) | (0 << 0),
 360                     EP93XX_GPIO_EEDRIVE);
 361
 362        i2c_register_board_info(0, devices, num);
 363        gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table);
 364        platform_device_register(&ep93xx_i2c_device);
 365}
 366
 367/*************************************************************************
 368 * EP93xx SPI peripheral handling
 369 *************************************************************************/
 370static struct ep93xx_spi_info ep93xx_spi_master_data;
 371
 372static struct resource ep93xx_spi_resources[] = {
 373        DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
 374        DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
 375};
 376
 377static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
 378
 379static struct platform_device ep93xx_spi_device = {
 380        .name           = "ep93xx-spi",
 381        .id             = 0,
 382        .dev            = {
 383                .platform_data          = &ep93xx_spi_master_data,
 384                .coherent_dma_mask      = DMA_BIT_MASK(32),
 385                .dma_mask               = &ep93xx_spi_dma_mask,
 386        },
 387        .num_resources  = ARRAY_SIZE(ep93xx_spi_resources),
 388        .resource       = ep93xx_spi_resources,
 389};
 390
 391/**
 392 * ep93xx_register_spi() - registers spi platform device
 393 * @info: ep93xx board specific spi master info (__initdata)
 394 * @devices: SPI devices to register (__initdata)
 395 * @num: number of SPI devices to register
 396 *
 397 * This function registers platform device for the EP93xx SPI controller and
 398 * also makes sure that SPI pins are muxed so that I2S is not using those pins.
 399 */
 400void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
 401                                struct spi_board_info *devices, int num)
 402{
 403        /*
 404         * When SPI is used, we need to make sure that I2S is muxed off from
 405         * SPI pins.
 406         */
 407        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
 408
 409        ep93xx_spi_master_data = *info;
 410        spi_register_board_info(devices, num);
 411        platform_device_register(&ep93xx_spi_device);
 412}
 413
 414/*************************************************************************
 415 * EP93xx LEDs
 416 *************************************************************************/
 417static const struct gpio_led ep93xx_led_pins[] __initconst = {
 418        {
 419                .name   = "platform:grled",
 420                .gpio   = EP93XX_GPIO_LINE_GRLED,
 421        }, {
 422                .name   = "platform:rdled",
 423                .gpio   = EP93XX_GPIO_LINE_RDLED,
 424        },
 425};
 426
 427static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
 428        .num_leds       = ARRAY_SIZE(ep93xx_led_pins),
 429        .leds           = ep93xx_led_pins,
 430};
 431
 432/*************************************************************************
 433 * EP93xx pwm peripheral handling
 434 *************************************************************************/
 435static struct resource ep93xx_pwm0_resource[] = {
 436        DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
 437};
 438
 439static struct platform_device ep93xx_pwm0_device = {
 440        .name           = "ep93xx-pwm",
 441        .id             = 0,
 442        .num_resources  = ARRAY_SIZE(ep93xx_pwm0_resource),
 443        .resource       = ep93xx_pwm0_resource,
 444};
 445
 446static struct resource ep93xx_pwm1_resource[] = {
 447        DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
 448};
 449
 450static struct platform_device ep93xx_pwm1_device = {
 451        .name           = "ep93xx-pwm",
 452        .id             = 1,
 453        .num_resources  = ARRAY_SIZE(ep93xx_pwm1_resource),
 454        .resource       = ep93xx_pwm1_resource,
 455};
 456
 457void __init ep93xx_register_pwm(int pwm0, int pwm1)
 458{
 459        if (pwm0)
 460                platform_device_register(&ep93xx_pwm0_device);
 461
 462        /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
 463        if (pwm1)
 464                platform_device_register(&ep93xx_pwm1_device);
 465}
 466
 467int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
 468{
 469        int err;
 470
 471        if (pdev->id == 0) {
 472                err = 0;
 473        } else if (pdev->id == 1) {
 474                err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
 475                                   dev_name(&pdev->dev));
 476                if (err)
 477                        return err;
 478                err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
 479                if (err)
 480                        goto fail;
 481
 482                /* PWM 1 output on EGPIO[14] */
 483                ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
 484        } else {
 485                err = -ENODEV;
 486        }
 487
 488        return err;
 489
 490fail:
 491        gpio_free(EP93XX_GPIO_LINE_EGPIO14);
 492        return err;
 493}
 494EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
 495
 496void ep93xx_pwm_release_gpio(struct platform_device *pdev)
 497{
 498        if (pdev->id == 1) {
 499                gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
 500                gpio_free(EP93XX_GPIO_LINE_EGPIO14);
 501
 502                /* EGPIO[14] used for GPIO */
 503                ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
 504        }
 505}
 506EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
 507
 508
 509/*************************************************************************
 510 * EP93xx video peripheral handling
 511 *************************************************************************/
 512static struct ep93xxfb_mach_info ep93xxfb_data;
 513
 514static struct resource ep93xx_fb_resource[] = {
 515        DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
 516};
 517
 518static struct platform_device ep93xx_fb_device = {
 519        .name                   = "ep93xx-fb",
 520        .id                     = -1,
 521        .dev                    = {
 522                .platform_data          = &ep93xxfb_data,
 523                .coherent_dma_mask      = DMA_BIT_MASK(32),
 524                .dma_mask               = &ep93xx_fb_device.dev.coherent_dma_mask,
 525        },
 526        .num_resources          = ARRAY_SIZE(ep93xx_fb_resource),
 527        .resource               = ep93xx_fb_resource,
 528};
 529
 530/* The backlight use a single register in the framebuffer's register space */
 531#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
 532
 533static struct resource ep93xx_bl_resources[] = {
 534        DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
 535                       EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
 536};
 537
 538static struct platform_device ep93xx_bl_device = {
 539        .name           = "ep93xx-bl",
 540        .id             = -1,
 541        .num_resources  = ARRAY_SIZE(ep93xx_bl_resources),
 542        .resource       = ep93xx_bl_resources,
 543};
 544
 545/**
 546 * ep93xx_register_fb - Register the framebuffer platform device.
 547 * @data:       platform specific framebuffer configuration (__initdata)
 548 */
 549void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 550{
 551        ep93xxfb_data = *data;
 552        platform_device_register(&ep93xx_fb_device);
 553        platform_device_register(&ep93xx_bl_device);
 554}
 555
 556
 557/*************************************************************************
 558 * EP93xx matrix keypad peripheral handling
 559 *************************************************************************/
 560static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
 561
 562static struct resource ep93xx_keypad_resource[] = {
 563        DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
 564        DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
 565};
 566
 567static struct platform_device ep93xx_keypad_device = {
 568        .name           = "ep93xx-keypad",
 569        .id             = -1,
 570        .dev            = {
 571                .platform_data  = &ep93xx_keypad_data,
 572        },
 573        .num_resources  = ARRAY_SIZE(ep93xx_keypad_resource),
 574        .resource       = ep93xx_keypad_resource,
 575};
 576
 577/**
 578 * ep93xx_register_keypad - Register the keypad platform device.
 579 * @data:       platform specific keypad configuration (__initdata)
 580 */
 581void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
 582{
 583        ep93xx_keypad_data = *data;
 584        platform_device_register(&ep93xx_keypad_device);
 585}
 586
 587int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
 588{
 589        int err;
 590        int i;
 591
 592        for (i = 0; i < 8; i++) {
 593                err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
 594                if (err)
 595                        goto fail_gpio_c;
 596                err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
 597                if (err)
 598                        goto fail_gpio_d;
 599        }
 600
 601        /* Enable the keypad controller; GPIO ports C and D used for keypad */
 602        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
 603                                 EP93XX_SYSCON_DEVCFG_GONK);
 604
 605        return 0;
 606
 607fail_gpio_d:
 608        gpio_free(EP93XX_GPIO_LINE_C(i));
 609fail_gpio_c:
 610        for (--i; i >= 0; --i) {
 611                gpio_free(EP93XX_GPIO_LINE_C(i));
 612                gpio_free(EP93XX_GPIO_LINE_D(i));
 613        }
 614        return err;
 615}
 616EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
 617
 618void ep93xx_keypad_release_gpio(struct platform_device *pdev)
 619{
 620        int i;
 621
 622        for (i = 0; i < 8; i++) {
 623                gpio_free(EP93XX_GPIO_LINE_C(i));
 624                gpio_free(EP93XX_GPIO_LINE_D(i));
 625        }
 626
 627        /* Disable the keypad controller; GPIO ports C and D used for GPIO */
 628        ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
 629                               EP93XX_SYSCON_DEVCFG_GONK);
 630}
 631EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
 632
 633/*************************************************************************
 634 * EP93xx I2S audio peripheral handling
 635 *************************************************************************/
 636static struct resource ep93xx_i2s_resource[] = {
 637        DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
 638};
 639
 640static struct platform_device ep93xx_i2s_device = {
 641        .name           = "ep93xx-i2s",
 642        .id             = -1,
 643        .num_resources  = ARRAY_SIZE(ep93xx_i2s_resource),
 644        .resource       = ep93xx_i2s_resource,
 645};
 646
 647static struct platform_device ep93xx_pcm_device = {
 648        .name           = "ep93xx-pcm-audio",
 649        .id             = -1,
 650};
 651
 652void __init ep93xx_register_i2s(void)
 653{
 654        platform_device_register(&ep93xx_i2s_device);
 655        platform_device_register(&ep93xx_pcm_device);
 656}
 657
 658#define EP93XX_SYSCON_DEVCFG_I2S_MASK   (EP93XX_SYSCON_DEVCFG_I2SONSSP | \
 659                                         EP93XX_SYSCON_DEVCFG_I2SONAC97)
 660
 661#define EP93XX_I2SCLKDIV_MASK           (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
 662                                         EP93XX_SYSCON_I2SCLKDIV_SPOL)
 663
 664int ep93xx_i2s_acquire(void)
 665{
 666        unsigned val;
 667
 668        ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
 669                        EP93XX_SYSCON_DEVCFG_I2S_MASK);
 670
 671        /*
 672         * This is potentially racy with the clock api for i2s_mclk, sclk and 
 673         * lrclk. Since the i2s driver is the only user of those clocks we
 674         * rely on it to prevent parallel use of this function and the 
 675         * clock api for the i2s clocks.
 676         */
 677        val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
 678        val &= ~EP93XX_I2SCLKDIV_MASK;
 679        val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
 680        ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
 681
 682        return 0;
 683}
 684EXPORT_SYMBOL(ep93xx_i2s_acquire);
 685
 686void ep93xx_i2s_release(void)
 687{
 688        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
 689}
 690EXPORT_SYMBOL(ep93xx_i2s_release);
 691
 692/*************************************************************************
 693 * EP93xx AC97 audio peripheral handling
 694 *************************************************************************/
 695static struct resource ep93xx_ac97_resources[] = {
 696        DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
 697        DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
 698};
 699
 700static struct platform_device ep93xx_ac97_device = {
 701        .name           = "ep93xx-ac97",
 702        .id             = -1,
 703        .num_resources  = ARRAY_SIZE(ep93xx_ac97_resources),
 704        .resource       = ep93xx_ac97_resources,
 705};
 706
 707void __init ep93xx_register_ac97(void)
 708{
 709        /*
 710         * Make sure that the AC97 pins are not used by I2S.
 711         */
 712        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
 713
 714        platform_device_register(&ep93xx_ac97_device);
 715        platform_device_register(&ep93xx_pcm_device);
 716}
 717
 718/*************************************************************************
 719 * EP93xx Watchdog
 720 *************************************************************************/
 721static struct resource ep93xx_wdt_resources[] = {
 722        DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
 723};
 724
 725static struct platform_device ep93xx_wdt_device = {
 726        .name           = "ep93xx-wdt",
 727        .id             = -1,
 728        .num_resources  = ARRAY_SIZE(ep93xx_wdt_resources),
 729        .resource       = ep93xx_wdt_resources,
 730};
 731
 732/*************************************************************************
 733 * EP93xx IDE
 734 *************************************************************************/
 735static struct resource ep93xx_ide_resources[] = {
 736        DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
 737        DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
 738};
 739
 740static struct platform_device ep93xx_ide_device = {
 741        .name           = "ep93xx-ide",
 742        .id             = -1,
 743        .dev            = {
 744                .dma_mask               = &ep93xx_ide_device.dev.coherent_dma_mask,
 745                .coherent_dma_mask      = DMA_BIT_MASK(32),
 746        },
 747        .num_resources  = ARRAY_SIZE(ep93xx_ide_resources),
 748        .resource       = ep93xx_ide_resources,
 749};
 750
 751void __init ep93xx_register_ide(void)
 752{
 753        platform_device_register(&ep93xx_ide_device);
 754}
 755
 756int ep93xx_ide_acquire_gpio(struct platform_device *pdev)
 757{
 758        int err;
 759        int i;
 760
 761        err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev));
 762        if (err)
 763                return err;
 764        err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev));
 765        if (err)
 766                goto fail_egpio15;
 767        for (i = 2; i < 8; i++) {
 768                err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev));
 769                if (err)
 770                        goto fail_gpio_e;
 771        }
 772        for (i = 4; i < 8; i++) {
 773                err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev));
 774                if (err)
 775                        goto fail_gpio_g;
 776        }
 777        for (i = 0; i < 8; i++) {
 778                err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev));
 779                if (err)
 780                        goto fail_gpio_h;
 781        }
 782
 783        /* GPIO ports E[7:2], G[7:4] and H used by IDE */
 784        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
 785                                 EP93XX_SYSCON_DEVCFG_GONIDE |
 786                                 EP93XX_SYSCON_DEVCFG_HONIDE);
 787        return 0;
 788
 789fail_gpio_h:
 790        for (--i; i >= 0; --i)
 791                gpio_free(EP93XX_GPIO_LINE_H(i));
 792        i = 8;
 793fail_gpio_g:
 794        for (--i; i >= 4; --i)
 795                gpio_free(EP93XX_GPIO_LINE_G(i));
 796        i = 8;
 797fail_gpio_e:
 798        for (--i; i >= 2; --i)
 799                gpio_free(EP93XX_GPIO_LINE_E(i));
 800        gpio_free(EP93XX_GPIO_LINE_EGPIO15);
 801fail_egpio15:
 802        gpio_free(EP93XX_GPIO_LINE_EGPIO2);
 803        return err;
 804}
 805EXPORT_SYMBOL(ep93xx_ide_acquire_gpio);
 806
 807void ep93xx_ide_release_gpio(struct platform_device *pdev)
 808{
 809        int i;
 810
 811        for (i = 2; i < 8; i++)
 812                gpio_free(EP93XX_GPIO_LINE_E(i));
 813        for (i = 4; i < 8; i++)
 814                gpio_free(EP93XX_GPIO_LINE_G(i));
 815        for (i = 0; i < 8; i++)
 816                gpio_free(EP93XX_GPIO_LINE_H(i));
 817        gpio_free(EP93XX_GPIO_LINE_EGPIO15);
 818        gpio_free(EP93XX_GPIO_LINE_EGPIO2);
 819
 820
 821        /* GPIO ports E[7:2], G[7:4] and H used by GPIO */
 822        ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
 823                               EP93XX_SYSCON_DEVCFG_GONIDE |
 824                               EP93XX_SYSCON_DEVCFG_HONIDE);
 825}
 826EXPORT_SYMBOL(ep93xx_ide_release_gpio);
 827
 828/*************************************************************************
 829 * EP93xx ADC
 830 *************************************************************************/
 831static struct resource ep93xx_adc_resources[] = {
 832        DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
 833        DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
 834};
 835
 836static struct platform_device ep93xx_adc_device = {
 837        .name           = "ep93xx-adc",
 838        .id             = -1,
 839        .num_resources  = ARRAY_SIZE(ep93xx_adc_resources),
 840        .resource       = ep93xx_adc_resources,
 841};
 842
 843void __init ep93xx_register_adc(void)
 844{
 845        /* Power up ADC, deactivate Touch Screen Controller */
 846        ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
 847                                EP93XX_SYSCON_DEVCFG_ADCPD);
 848
 849        platform_device_register(&ep93xx_adc_device);
 850}
 851
 852/*************************************************************************
 853 * EP93xx Security peripheral
 854 *************************************************************************/
 855
 856/*
 857 * The Maverick Key is 256 bits of micro fuses blown at the factory during
 858 * manufacturing to uniquely identify a part.
 859 *
 860 * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key
 861 */
 862#define EP93XX_SECURITY_REG(x)          (EP93XX_SECURITY_BASE + (x))
 863#define EP93XX_SECURITY_SECFLG          EP93XX_SECURITY_REG(0x2400)
 864#define EP93XX_SECURITY_FUSEFLG         EP93XX_SECURITY_REG(0x2410)
 865#define EP93XX_SECURITY_UNIQID          EP93XX_SECURITY_REG(0x2440)
 866#define EP93XX_SECURITY_UNIQCHK         EP93XX_SECURITY_REG(0x2450)
 867#define EP93XX_SECURITY_UNIQVAL         EP93XX_SECURITY_REG(0x2460)
 868#define EP93XX_SECURITY_SECID1          EP93XX_SECURITY_REG(0x2500)
 869#define EP93XX_SECURITY_SECID2          EP93XX_SECURITY_REG(0x2504)
 870#define EP93XX_SECURITY_SECCHK1         EP93XX_SECURITY_REG(0x2520)
 871#define EP93XX_SECURITY_SECCHK2         EP93XX_SECURITY_REG(0x2524)
 872#define EP93XX_SECURITY_UNIQID2         EP93XX_SECURITY_REG(0x2700)
 873#define EP93XX_SECURITY_UNIQID3         EP93XX_SECURITY_REG(0x2704)
 874#define EP93XX_SECURITY_UNIQID4         EP93XX_SECURITY_REG(0x2708)
 875#define EP93XX_SECURITY_UNIQID5         EP93XX_SECURITY_REG(0x270c)
 876
 877static char ep93xx_soc_id[33];
 878
 879static const char __init *ep93xx_get_soc_id(void)
 880{
 881        unsigned int id, id2, id3, id4, id5;
 882
 883        if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1)
 884                return "bad Hamming code";
 885
 886        id = __raw_readl(EP93XX_SECURITY_UNIQID);
 887        id2 = __raw_readl(EP93XX_SECURITY_UNIQID2);
 888        id3 = __raw_readl(EP93XX_SECURITY_UNIQID3);
 889        id4 = __raw_readl(EP93XX_SECURITY_UNIQID4);
 890        id5 = __raw_readl(EP93XX_SECURITY_UNIQID5);
 891
 892        if (id != id2)
 893                return "invalid";
 894
 895        /* Toss the unique ID into the entropy pool */
 896        add_device_randomness(&id2, 4);
 897        add_device_randomness(&id3, 4);
 898        add_device_randomness(&id4, 4);
 899        add_device_randomness(&id5, 4);
 900
 901        snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
 902                 "%08x%08x%08x%08x", id2, id3, id4, id5);
 903
 904        return ep93xx_soc_id;
 905}
 906
 907static const char __init *ep93xx_get_soc_rev(void)
 908{
 909        int rev = ep93xx_chip_revision();
 910
 911        switch (rev) {
 912        case EP93XX_CHIP_REV_D0:
 913                return "D0";
 914        case EP93XX_CHIP_REV_D1:
 915                return "D1";
 916        case EP93XX_CHIP_REV_E0:
 917                return "E0";
 918        case EP93XX_CHIP_REV_E1:
 919                return "E1";
 920        case EP93XX_CHIP_REV_E2:
 921                return "E2";
 922        default:
 923                return "unknown";
 924        }
 925}
 926
 927static const char __init *ep93xx_get_machine_name(void)
 928{
 929        return kasprintf(GFP_KERNEL,"%s", machine_desc->name);
 930}
 931
 932static struct device __init *ep93xx_init_soc(void)
 933{
 934        struct soc_device_attribute *soc_dev_attr;
 935        struct soc_device *soc_dev;
 936
 937        soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
 938        if (!soc_dev_attr)
 939                return NULL;
 940
 941        soc_dev_attr->machine = ep93xx_get_machine_name();
 942        soc_dev_attr->family = "Cirrus Logic EP93xx";
 943        soc_dev_attr->revision = ep93xx_get_soc_rev();
 944        soc_dev_attr->soc_id = ep93xx_get_soc_id();
 945
 946        soc_dev = soc_device_register(soc_dev_attr);
 947        if (IS_ERR(soc_dev)) {
 948                kfree(soc_dev_attr->machine);
 949                kfree(soc_dev_attr);
 950                return NULL;
 951        }
 952
 953        return soc_device_to_device(soc_dev);
 954}
 955
 956struct device __init *ep93xx_init_devices(void)
 957{
 958        struct device *parent;
 959
 960        /* Disallow access to MaverickCrunch initially */
 961        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 962
 963        /* Default all ports to GPIO */
 964        ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
 965                               EP93XX_SYSCON_DEVCFG_GONK |
 966                               EP93XX_SYSCON_DEVCFG_EONIDE |
 967                               EP93XX_SYSCON_DEVCFG_GONIDE |
 968                               EP93XX_SYSCON_DEVCFG_HONIDE);
 969
 970        parent = ep93xx_init_soc();
 971
 972        /* Get the GPIO working early, other devices need it */
 973        platform_device_register(&ep93xx_gpio_device);
 974
 975        amba_device_register(&uart1_device, &iomem_resource);
 976        amba_device_register(&uart2_device, &iomem_resource);
 977        amba_device_register(&uart3_device, &iomem_resource);
 978
 979        platform_device_register(&ep93xx_rtc_device);
 980        platform_device_register(&ep93xx_ohci_device);
 981        platform_device_register(&ep93xx_wdt_device);
 982
 983        gpio_led_register_device(-1, &ep93xx_led_data);
 984
 985        return parent;
 986}
 987
 988void ep93xx_restart(enum reboot_mode mode, const char *cmd)
 989{
 990        /*
 991         * Set then clear the SWRST bit to initiate a software reset
 992         */
 993        ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
 994        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
 995
 996        while (1)
 997                ;
 998}
 999
1000void __init ep93xx_init_late(void)
1001{
1002        crunch_init();
1003}
1004