1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17#include <linux/kernel.h>
18#include <linux/init.h>
19#include <linux/export.h>
20#include <linux/platform_device.h>
21#include <linux/fb.h>
22#include <linux/pm.h>
23#include <linux/delay.h>
24#include <linux/mtd/physmap.h>
25#include <linux/gpio.h>
26#include <linux/i2c.h>
27#include <linux/platform_data/i2c-pxa.h>
28#include <linux/regulator/machine.h>
29#include <linux/spi/spi.h>
30#include <linux/spi/ads7846.h>
31#include <linux/spi/pxa2xx_spi.h>
32#include <linux/mtd/sharpsl.h>
33#include <linux/memblock.h>
34
35#include <mach/hardware.h>
36#include <asm/mach-types.h>
37#include <asm/irq.h>
38#include <asm/setup.h>
39
40#include <asm/mach/arch.h>
41#include <asm/mach/map.h>
42#include <asm/mach/irq.h>
43
44#include "pxa25x.h"
45#include <linux/platform_data/mmc-pxamci.h>
46#include "udc.h"
47#include <linux/platform_data/irda-pxaficp.h>
48#include <mach/poodle.h>
49#include <linux/platform_data/video-pxafb.h>
50
51#include <asm/hardware/scoop.h>
52#include <asm/hardware/locomo.h>
53#include <asm/mach/sharpsl_param.h>
54
55#include "generic.h"
56#include "devices.h"
57
58static unsigned long poodle_pin_config[] __initdata = {
59
60 GPIO79_nCS_3,
61 GPIO80_nCS_4,
62 GPIO18_RDY,
63
64
65 GPIO12_32KHz,
66
67
68 GPIO23_SSP1_SCLK,
69 GPIO25_SSP1_TXD,
70 GPIO26_SSP1_RXD,
71 GPIO24_GPIO,
72
73
74 GPIO28_I2S_BITCLK_OUT,
75 GPIO29_I2S_SDATA_IN,
76 GPIO30_I2S_SDATA_OUT,
77 GPIO31_I2S_SYNC,
78 GPIO32_I2S_SYSCLK,
79
80
81 GPIO47_FICP_TXD,
82 GPIO46_FICP_RXD,
83
84
85 GPIO40_FFUART_DTR,
86 GPIO41_FFUART_RTS,
87 GPIO39_FFUART_TXD,
88 GPIO37_FFUART_DSR,
89 GPIO34_FFUART_RXD,
90 GPIO35_FFUART_CTS,
91
92
93 GPIOxx_LCD_TFT_16BPP,
94
95
96 GPIO48_nPOE,
97 GPIO49_nPWE,
98 GPIO50_nPIOR,
99 GPIO51_nPIOW,
100 GPIO52_nPCE_1,
101 GPIO53_nPCE_2,
102 GPIO54_nPSKTSEL,
103 GPIO55_nPREG,
104 GPIO56_nPWAIT,
105 GPIO57_nIOIS16,
106
107
108 GPIO6_MMC_CLK,
109 GPIO8_MMC_CS0,
110
111
112 GPIO9_GPIO,
113 GPIO7_GPIO,
114 GPIO3_GPIO,
115 GPIO33_GPIO,
116
117 GPIO20_GPIO,
118 GPIO22_GPIO,
119};
120
121static struct resource poodle_scoop_resources[] = {
122 [0] = {
123 .start = 0x10800000,
124 .end = 0x10800fff,
125 .flags = IORESOURCE_MEM,
126 },
127};
128
129static struct scoop_config poodle_scoop_setup = {
130 .io_dir = POODLE_SCOOP_IO_DIR,
131 .io_out = POODLE_SCOOP_IO_OUT,
132 .gpio_base = POODLE_SCOOP_GPIO_BASE,
133};
134
135struct platform_device poodle_scoop_device = {
136 .name = "sharp-scoop",
137 .id = -1,
138 .dev = {
139 .platform_data = &poodle_scoop_setup,
140 },
141 .num_resources = ARRAY_SIZE(poodle_scoop_resources),
142 .resource = poodle_scoop_resources,
143};
144
145static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
146{
147 .dev = &poodle_scoop_device.dev,
148 .irq = POODLE_IRQ_GPIO_CF_IRQ,
149 .cd_irq = POODLE_IRQ_GPIO_CF_CD,
150 .cd_irq_str = "PCMCIA0 CD",
151},
152};
153
154static struct scoop_pcmcia_config poodle_pcmcia_config = {
155 .devs = &poodle_pcmcia_scoop[0],
156 .num_devs = 1,
157};
158
159EXPORT_SYMBOL(poodle_scoop_device);
160
161
162static struct platform_device poodle_audio_device = {
163 .name = "poodle-audio",
164 .id = -1,
165};
166
167
168static struct resource locomo_resources[] = {
169 [0] = {
170 .start = 0x10000000,
171 .end = 0x10001fff,
172 .flags = IORESOURCE_MEM,
173 },
174 [1] = {
175 .start = PXA_GPIO_TO_IRQ(10),
176 .end = PXA_GPIO_TO_IRQ(10),
177 .flags = IORESOURCE_IRQ,
178 },
179};
180
181static struct locomo_platform_data locomo_info = {
182 .irq_base = IRQ_BOARD_START,
183};
184
185struct platform_device poodle_locomo_device = {
186 .name = "locomo",
187 .id = 0,
188 .num_resources = ARRAY_SIZE(locomo_resources),
189 .resource = locomo_resources,
190 .dev = {
191 .platform_data = &locomo_info,
192 },
193};
194
195EXPORT_SYMBOL(poodle_locomo_device);
196
197#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
198static struct pxa2xx_spi_master poodle_spi_info = {
199 .num_chipselect = 1,
200};
201
202static struct ads7846_platform_data poodle_ads7846_info = {
203 .model = 7846,
204 .vref_delay_usecs = 100,
205 .x_plate_ohms = 419,
206 .y_plate_ohms = 486,
207 .gpio_pendown = POODLE_GPIO_TP_INT,
208};
209
210static struct pxa2xx_spi_chip poodle_ads7846_chip = {
211 .gpio_cs = POODLE_GPIO_TP_CS,
212};
213
214static struct spi_board_info poodle_spi_devices[] = {
215 {
216 .modalias = "ads7846",
217 .max_speed_hz = 10000,
218 .bus_num = 1,
219 .platform_data = &poodle_ads7846_info,
220 .controller_data= &poodle_ads7846_chip,
221 .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
222 },
223};
224
225static void __init poodle_init_spi(void)
226{
227 pxa2xx_set_spi_info(1, &poodle_spi_info);
228 spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
229}
230#else
231static inline void poodle_init_spi(void) {}
232#endif
233
234
235
236
237
238
239
240static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
241{
242 int err;
243
244 err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
245 if (err)
246 goto err_free_2;
247
248 err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
249 if (err)
250 goto err_free_3;
251
252 gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
253 gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
254
255 return 0;
256
257err_free_3:
258 gpio_free(POODLE_GPIO_SD_PWR);
259err_free_2:
260 return err;
261}
262
263static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
264{
265 struct pxamci_platform_data* p_d = dev->platform_data;
266
267 if ((1 << vdd) & p_d->ocr_mask) {
268 gpio_set_value(POODLE_GPIO_SD_PWR, 1);
269 mdelay(2);
270 gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
271 } else {
272 gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
273 gpio_set_value(POODLE_GPIO_SD_PWR, 0);
274 }
275
276 return 0;
277}
278
279static void poodle_mci_exit(struct device *dev, void *data)
280{
281 gpio_free(POODLE_GPIO_SD_PWR1);
282 gpio_free(POODLE_GPIO_SD_PWR);
283}
284
285static struct pxamci_platform_data poodle_mci_platform_data = {
286 .detect_delay_ms = 250,
287 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
288 .init = poodle_mci_init,
289 .setpower = poodle_mci_setpower,
290 .exit = poodle_mci_exit,
291 .gpio_card_detect = POODLE_GPIO_nSD_DETECT,
292 .gpio_card_ro = POODLE_GPIO_nSD_WP,
293 .gpio_power = -1,
294};
295
296
297
298
299
300static struct pxaficp_platform_data poodle_ficp_platform_data = {
301 .gpio_pwdown = POODLE_GPIO_IR_ON,
302 .transceiver_cap = IR_SIRMODE | IR_OFF,
303};
304
305
306
307
308
309static struct pxa2xx_udc_mach_info udc_info __initdata = {
310
311 .gpio_pullup = POODLE_GPIO_USB_PULLUP,
312};
313
314
315
316static struct pxafb_mode_info poodle_fb_mode = {
317 .pixclock = 144700,
318 .xres = 320,
319 .yres = 240,
320 .bpp = 16,
321 .hsync_len = 7,
322 .left_margin = 11,
323 .right_margin = 30,
324 .vsync_len = 2,
325 .upper_margin = 2,
326 .lower_margin = 0,
327 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
328};
329
330static struct pxafb_mach_info poodle_fb_info = {
331 .modes = &poodle_fb_mode,
332 .num_modes = 1,
333 .lcd_conn = LCD_COLOR_TFT_16BPP,
334};
335
336static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
337
338static struct nand_bbt_descr sharpsl_bbt = {
339 .options = 0,
340 .offs = 4,
341 .len = 2,
342 .pattern = scan_ff_pattern
343};
344
345static const char * const probes[] = {
346 "cmdlinepart",
347 "ofpart",
348 "sharpslpart",
349 NULL,
350};
351
352static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
353 .badblock_pattern = &sharpsl_bbt,
354 .part_parsers = probes,
355};
356
357static struct resource sharpsl_nand_resources[] = {
358 {
359 .start = 0x0C000000,
360 .end = 0x0C000FFF,
361 .flags = IORESOURCE_MEM,
362 },
363};
364
365static struct platform_device sharpsl_nand_device = {
366 .name = "sharpsl-nand",
367 .id = -1,
368 .resource = sharpsl_nand_resources,
369 .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
370 .dev.platform_data = &sharpsl_nand_platform_data,
371};
372
373static struct mtd_partition sharpsl_rom_parts[] = {
374 {
375 .name ="Boot PROM Filesystem",
376 .offset = 0x00120000,
377 .size = MTDPART_SIZ_FULL,
378 },
379};
380
381static struct physmap_flash_data sharpsl_rom_data = {
382 .width = 2,
383 .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
384 .parts = sharpsl_rom_parts,
385};
386
387static struct resource sharpsl_rom_resources[] = {
388 {
389 .start = 0x00000000,
390 .end = 0x007fffff,
391 .flags = IORESOURCE_MEM,
392 },
393};
394
395static struct platform_device sharpsl_rom_device = {
396 .name = "physmap-flash",
397 .id = -1,
398 .resource = sharpsl_rom_resources,
399 .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
400 .dev.platform_data = &sharpsl_rom_data,
401};
402
403static struct platform_device *devices[] __initdata = {
404 &poodle_locomo_device,
405 &poodle_scoop_device,
406 &poodle_audio_device,
407 &sharpsl_nand_device,
408 &sharpsl_rom_device,
409};
410
411static struct i2c_board_info __initdata poodle_i2c_devices[] = {
412 { I2C_BOARD_INFO("wm8731", 0x1b) },
413};
414
415static void poodle_poweroff(void)
416{
417 pxa_restart(REBOOT_HARD, NULL);
418}
419
420static void __init poodle_init(void)
421{
422 int ret = 0;
423
424 pm_power_off = poodle_poweroff;
425
426 PCFR |= PCFR_OPDE;
427
428 pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
429
430 pxa_set_ffuart_info(NULL);
431 pxa_set_btuart_info(NULL);
432 pxa_set_stuart_info(NULL);
433
434 platform_scoop_config = &poodle_pcmcia_config;
435
436 ret = platform_add_devices(devices, ARRAY_SIZE(devices));
437 if (ret)
438 pr_warn("poodle: Unable to register LoCoMo device\n");
439
440 pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
441 pxa_set_udc_info(&udc_info);
442 pxa_set_mci_info(&poodle_mci_platform_data);
443 pxa_set_ficp_info(&poodle_ficp_platform_data);
444 pxa_set_i2c_info(NULL);
445 i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
446 poodle_init_spi();
447 regulator_has_full_constraints();
448}
449
450static void __init fixup_poodle(struct tag *tags, char **cmdline)
451{
452 sharpsl_save_param();
453 memblock_add(0xa0000000, SZ_32M);
454}
455
456MACHINE_START(POODLE, "SHARP Poodle")
457 .fixup = fixup_poodle,
458 .map_io = pxa25x_map_io,
459 .nr_irqs = POODLE_NR_IRQS,
460 .init_irq = pxa25x_init_irq,
461 .handle_irq = pxa25x_handle_irq,
462 .init_time = pxa_timer_init,
463 .init_machine = poodle_init,
464 .restart = pxa_restart,
465MACHINE_END
466
