linux/arch/arm/mach-s3c24xx/mach-rx3715.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2//
   3// Copyright (c) 2003-2004 Simtec Electronics
   4//      Ben Dooks <ben@simtec.co.uk>
   5//
   6// http://www.handhelds.org/projects/rx3715.html
   7
   8#include <linux/kernel.h>
   9#include <linux/types.h>
  10#include <linux/interrupt.h>
  11#include <linux/list.h>
  12#include <linux/memblock.h>
  13#include <linux/timer.h>
  14#include <linux/init.h>
  15#include <linux/tty.h>
  16#include <linux/console.h>
  17#include <linux/device.h>
  18#include <linux/platform_device.h>
  19#include <linux/serial_core.h>
  20#include <linux/serial_s3c.h>
  21#include <linux/serial.h>
  22#include <linux/io.h>
  23#include <linux/mtd/mtd.h>
  24#include <linux/mtd/rawnand.h>
  25#include <linux/mtd/nand_ecc.h>
  26#include <linux/mtd/partitions.h>
  27
  28#include <asm/mach/arch.h>
  29#include <asm/mach/irq.h>
  30#include <asm/mach/map.h>
  31
  32#include <linux/platform_data/mtd-nand-s3c2410.h>
  33
  34#include <asm/irq.h>
  35#include <asm/mach-types.h>
  36
  37#include <mach/fb.h>
  38#include <mach/hardware.h>
  39#include <mach/regs-gpio.h>
  40#include <mach/regs-lcd.h>
  41#include <mach/gpio-samsung.h>
  42
  43#include <plat/cpu.h>
  44#include <plat/devs.h>
  45#include <plat/pm.h>
  46#include <plat/samsung-time.h>
  47
  48#include "common.h"
  49#include "h1940.h"
  50
  51static struct map_desc rx3715_iodesc[] __initdata = {
  52        /* dump ISA space somewhere unused */
  53
  54        {
  55                .virtual        = (u32)S3C24XX_VA_ISA_WORD,
  56                .pfn            = __phys_to_pfn(S3C2410_CS3),
  57                .length         = SZ_1M,
  58                .type           = MT_DEVICE,
  59        }, {
  60                .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
  61                .pfn            = __phys_to_pfn(S3C2410_CS3),
  62                .length         = SZ_1M,
  63                .type           = MT_DEVICE,
  64        },
  65};
  66
  67static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
  68        [0] = {
  69                .hwport      = 0,
  70                .flags       = 0,
  71                .ucon        = 0x3c5,
  72                .ulcon       = 0x03,
  73                .ufcon       = 0x51,
  74                .clk_sel        = S3C2410_UCON_CLKSEL3,
  75        },
  76        [1] = {
  77                .hwport      = 1,
  78                .flags       = 0,
  79                .ucon        = 0x3c5,
  80                .ulcon       = 0x03,
  81                .ufcon       = 0x00,
  82                .clk_sel        = S3C2410_UCON_CLKSEL3,
  83        },
  84        /* IR port */
  85        [2] = {
  86                .hwport      = 2,
  87                .uart_flags  = UPF_CONS_FLOW,
  88                .ucon        = 0x3c5,
  89                .ulcon       = 0x43,
  90                .ufcon       = 0x51,
  91                .clk_sel        = S3C2410_UCON_CLKSEL3,
  92        }
  93};
  94
  95/* framebuffer lcd controller information */
  96
  97static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
  98        .lcdcon5 =      S3C2410_LCDCON5_INVVLINE |
  99                        S3C2410_LCDCON5_FRM565 |
 100                        S3C2410_LCDCON5_HWSWP,
 101
 102        .type           = S3C2410_LCDCON1_TFT,
 103        .width          = 240,
 104        .height         = 320,
 105
 106        .pixclock       = 260000,
 107        .xres           = 240,
 108        .yres           = 320,
 109        .bpp            = 16,
 110        .left_margin    = 36,
 111        .right_margin   = 36,
 112        .hsync_len      = 8,
 113        .upper_margin   = 6,
 114        .lower_margin   = 7,
 115        .vsync_len      = 3,
 116};
 117
 118static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 119
 120        .displays =     &rx3715_lcdcfg,
 121        .num_displays = 1,
 122        .default_display = 0,
 123
 124        .lpcsel =       0xf82,
 125
 126        .gpccon =       0xaa955699,
 127        .gpccon_mask =  0xffc003cc,
 128        .gpcup =        0x0000ffff,
 129        .gpcup_mask =   0xffffffff,
 130
 131        .gpdcon =       0xaa95aaa1,
 132        .gpdcon_mask =  0xffc0fff0,
 133        .gpdup =        0x0000faff,
 134        .gpdup_mask =   0xffffffff,
 135};
 136
 137static struct mtd_partition __initdata rx3715_nand_part[] = {
 138        [0] = {
 139                .name           = "Whole Flash",
 140                .offset         = 0,
 141                .size           = MTDPART_SIZ_FULL,
 142                .mask_flags     = MTD_WRITEABLE,
 143        }
 144};
 145
 146static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
 147        [0] = {
 148                .name           = "Internal",
 149                .nr_chips       = 1,
 150                .nr_partitions  = ARRAY_SIZE(rx3715_nand_part),
 151                .partitions     = rx3715_nand_part,
 152        },
 153};
 154
 155static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 156        .tacls          = 25,
 157        .twrph0         = 50,
 158        .twrph1         = 15,
 159        .nr_sets        = ARRAY_SIZE(rx3715_nand_sets),
 160        .sets           = rx3715_nand_sets,
 161        .ecc_mode       = NAND_ECC_SOFT,
 162};
 163
 164static struct platform_device *rx3715_devices[] __initdata = {
 165        &s3c_device_ohci,
 166        &s3c_device_lcd,
 167        &s3c_device_wdt,
 168        &s3c_device_i2c0,
 169        &s3c_device_iis,
 170        &s3c_device_nand,
 171};
 172
 173static void __init rx3715_map_io(void)
 174{
 175        s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 176        s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 177        samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 178}
 179
 180static void __init rx3715_init_time(void)
 181{
 182        s3c2440_init_clocks(16934000);
 183        samsung_timer_init();
 184}
 185
 186/* H1940 and RX3715 need to reserve this for suspend */
 187static void __init rx3715_reserve(void)
 188{
 189        memblock_reserve(0x30003000, 0x1000);
 190        memblock_reserve(0x30081000, 0x1000);
 191}
 192
 193static void __init rx3715_init_machine(void)
 194{
 195#ifdef CONFIG_PM_H1940
 196        memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 197#endif
 198        s3c_pm_init();
 199
 200        s3c_nand_set_platdata(&rx3715_nand_info);
 201        s3c24xx_fb_set_platdata(&rx3715_fb_info);
 202        platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 203}
 204
 205MACHINE_START(RX3715, "IPAQ-RX3715")
 206        /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 207        .atag_offset    = 0x100,
 208        .map_io         = rx3715_map_io,
 209        .reserve        = rx3715_reserve,
 210        .init_irq       = s3c2440_init_irq,
 211        .init_machine   = rx3715_init_machine,
 212        .init_time      = rx3715_init_time,
 213MACHINE_END
 214