linux/arch/sh/boards/mach-kfr2r09/setup.c
<<
>>
Prefs
   1/*
   2 * KFR2R09 board support code
   3 *
   4 * Copyright (C) 2009 Magnus Damm
   5 *
   6 * This file is subject to the terms and conditions of the GNU General Public
   7 * License.  See the file "COPYING" in the main directory of this archive
   8 * for more details.
   9 */
  10#include <linux/init.h>
  11#include <linux/platform_device.h>
  12#include <linux/interrupt.h>
  13#include <linux/mmc/host.h>
  14#include <linux/mfd/tmio.h>
  15#include <linux/mtd/physmap.h>
  16#include <linux/mtd/onenand.h>
  17#include <linux/delay.h>
  18#include <linux/clk.h>
  19#include <linux/gpio.h>
  20#include <linux/input.h>
  21#include <linux/input/sh_keysc.h>
  22#include <linux/i2c.h>
  23#include <linux/platform_data/lv5207lp.h>
  24#include <linux/regulator/fixed.h>
  25#include <linux/regulator/machine.h>
  26#include <linux/usb/r8a66597.h>
  27#include <linux/videodev2.h>
  28#include <linux/sh_intc.h>
  29#include <media/i2c/rj54n1cb0c.h>
  30#include <media/soc_camera.h>
  31#include <media/drv-intf/sh_mobile_ceu.h>
  32#include <video/sh_mobile_lcdc.h>
  33#include <asm/suspend.h>
  34#include <asm/clock.h>
  35#include <asm/machvec.h>
  36#include <asm/io.h>
  37#include <cpu/sh7724.h>
  38#include <mach/kfr2r09.h>
  39
  40static struct mtd_partition kfr2r09_nor_flash_partitions[] =
  41{
  42        {
  43                .name = "boot",
  44                .offset = 0,
  45                .size = (4 * 1024 * 1024),
  46                .mask_flags = MTD_WRITEABLE,    /* Read-only */
  47        },
  48        {
  49                .name = "other",
  50                .offset = MTDPART_OFS_APPEND,
  51                .size = MTDPART_SIZ_FULL,
  52        },
  53};
  54
  55static struct physmap_flash_data kfr2r09_nor_flash_data = {
  56        .width          = 2,
  57        .parts          = kfr2r09_nor_flash_partitions,
  58        .nr_parts       = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
  59};
  60
  61static struct resource kfr2r09_nor_flash_resources[] = {
  62        [0] = {
  63                .name           = "NOR Flash",
  64                .start          = 0x00000000,
  65                .end            = 0x03ffffff,
  66                .flags          = IORESOURCE_MEM,
  67        }
  68};
  69
  70static struct platform_device kfr2r09_nor_flash_device = {
  71        .name           = "physmap-flash",
  72        .resource       = kfr2r09_nor_flash_resources,
  73        .num_resources  = ARRAY_SIZE(kfr2r09_nor_flash_resources),
  74        .dev            = {
  75                .platform_data = &kfr2r09_nor_flash_data,
  76        },
  77};
  78
  79static struct resource kfr2r09_nand_flash_resources[] = {
  80        [0] = {
  81                .name           = "NAND Flash",
  82                .start          = 0x10000000,
  83                .end            = 0x1001ffff,
  84                .flags          = IORESOURCE_MEM,
  85        }
  86};
  87
  88static struct platform_device kfr2r09_nand_flash_device = {
  89        .name           = "onenand-flash",
  90        .resource       = kfr2r09_nand_flash_resources,
  91        .num_resources  = ARRAY_SIZE(kfr2r09_nand_flash_resources),
  92};
  93
  94static struct sh_keysc_info kfr2r09_sh_keysc_info = {
  95        .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
  96        .scan_timing = 3,
  97        .delay = 10,
  98        .keycodes = {
  99                KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
 100                KEY_1, KEY_2, KEY_3, 0, KEY_UP,
 101                KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
 102                KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
 103                KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
 104                0, 0, 0, 0, 0
 105        },
 106};
 107
 108static struct resource kfr2r09_sh_keysc_resources[] = {
 109        [0] = {
 110                .name   = "KEYSC",
 111                .start  = 0x044b0000,
 112                .end    = 0x044b000f,
 113                .flags  = IORESOURCE_MEM,
 114        },
 115        [1] = {
 116                .start  = evt2irq(0xbe0),
 117                .flags  = IORESOURCE_IRQ,
 118        },
 119};
 120
 121static struct platform_device kfr2r09_sh_keysc_device = {
 122        .name           = "sh_keysc",
 123        .id             = 0, /* "keysc0" clock */
 124        .num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
 125        .resource       = kfr2r09_sh_keysc_resources,
 126        .dev    = {
 127                .platform_data  = &kfr2r09_sh_keysc_info,
 128        },
 129};
 130
 131static const struct fb_videomode kfr2r09_lcdc_modes[] = {
 132        {
 133                .name = "TX07D34VM0AAA",
 134                .xres = 240,
 135                .yres = 400,
 136                .left_margin = 0,
 137                .right_margin = 16,
 138                .hsync_len = 8,
 139                .upper_margin = 0,
 140                .lower_margin = 1,
 141                .vsync_len = 1,
 142                .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 143        },
 144};
 145
 146static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 147        .clock_source = LCDC_CLK_BUS,
 148        .ch[0] = {
 149                .chan = LCDC_CHAN_MAINLCD,
 150                .fourcc = V4L2_PIX_FMT_RGB565,
 151                .interface_type = SYS18,
 152                .clock_divider = 6,
 153                .flags = LCDC_FLAGS_DWPOL,
 154                .lcd_modes = kfr2r09_lcdc_modes,
 155                .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
 156                .panel_cfg = {
 157                        .width = 35,
 158                        .height = 58,
 159                        .setup_sys = kfr2r09_lcd_setup,
 160                        .start_transfer = kfr2r09_lcd_start,
 161                },
 162                .sys_bus_cfg = {
 163                        .ldmt2r = 0x07010904,
 164                        .ldmt3r = 0x14012914,
 165                        /* set 1s delay to encourage fsync() */
 166                        .deferred_io_msec = 1000,
 167                },
 168        }
 169};
 170
 171static struct resource kfr2r09_sh_lcdc_resources[] = {
 172        [0] = {
 173                .name   = "LCDC",
 174                .start  = 0xfe940000, /* P4-only space */
 175                .end    = 0xfe942fff,
 176                .flags  = IORESOURCE_MEM,
 177        },
 178        [1] = {
 179                .start  = evt2irq(0xf40),
 180                .flags  = IORESOURCE_IRQ,
 181        },
 182};
 183
 184static struct platform_device kfr2r09_sh_lcdc_device = {
 185        .name           = "sh_mobile_lcdc_fb",
 186        .num_resources  = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
 187        .resource       = kfr2r09_sh_lcdc_resources,
 188        .dev    = {
 189                .platform_data  = &kfr2r09_sh_lcdc_info,
 190        },
 191};
 192
 193static struct lv5207lp_platform_data kfr2r09_backlight_data = {
 194        .fbdev = &kfr2r09_sh_lcdc_device.dev,
 195        .def_value = 13,
 196        .max_value = 13,
 197};
 198
 199static struct i2c_board_info kfr2r09_backlight_board_info = {
 200        I2C_BOARD_INFO("lv5207lp", 0x75),
 201        .platform_data = &kfr2r09_backlight_data,
 202};
 203
 204static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
 205        .on_chip = 1,
 206};
 207
 208static struct resource kfr2r09_usb0_gadget_resources[] = {
 209        [0] = {
 210                .start  = 0x04d80000,
 211                .end    = 0x04d80123,
 212                .flags  = IORESOURCE_MEM,
 213        },
 214        [1] = {
 215                .start  = evt2irq(0xa20),
 216                .end    = evt2irq(0xa20),
 217                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 218        },
 219};
 220
 221static struct platform_device kfr2r09_usb0_gadget_device = {
 222        .name           = "r8a66597_udc",
 223        .id             = 0,
 224        .dev = {
 225                .dma_mask               = NULL,         /*  not use dma */
 226                .coherent_dma_mask      = 0xffffffff,
 227                .platform_data  = &kfr2r09_usb0_gadget_data,
 228        },
 229        .num_resources  = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
 230        .resource       = kfr2r09_usb0_gadget_resources,
 231};
 232
 233static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 234        .flags = SH_CEU_FLAG_USE_8BIT_BUS,
 235};
 236
 237static struct resource kfr2r09_ceu_resources[] = {
 238        [0] = {
 239                .name   = "CEU",
 240                .start  = 0xfe910000,
 241                .end    = 0xfe91009f,
 242                .flags  = IORESOURCE_MEM,
 243        },
 244        [1] = {
 245                .start  = evt2irq(0x880),
 246                .end    = evt2irq(0x880),
 247                .flags  = IORESOURCE_IRQ,
 248        },
 249        [2] = {
 250                /* place holder for contiguous memory */
 251        },
 252};
 253
 254static struct platform_device kfr2r09_ceu_device = {
 255        .name           = "sh_mobile_ceu",
 256        .id             = 0, /* "ceu0" clock */
 257        .num_resources  = ARRAY_SIZE(kfr2r09_ceu_resources),
 258        .resource       = kfr2r09_ceu_resources,
 259        .dev    = {
 260                .platform_data  = &sh_mobile_ceu_info,
 261        },
 262};
 263
 264static struct i2c_board_info kfr2r09_i2c_camera = {
 265        I2C_BOARD_INFO("rj54n1cb0c", 0x50),
 266};
 267
 268static struct clk *camera_clk;
 269
 270/* set VIO_CKO clock to 25MHz */
 271#define CEU_MCLK_FREQ 25000000
 272
 273#define DRVCRB 0xA405018C
 274static int camera_power(struct device *dev, int mode)
 275{
 276        int ret;
 277
 278        if (mode) {
 279                long rate;
 280
 281                camera_clk = clk_get(NULL, "video_clk");
 282                if (IS_ERR(camera_clk))
 283                        return PTR_ERR(camera_clk);
 284
 285                rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ);
 286                ret = clk_set_rate(camera_clk, rate);
 287                if (ret < 0)
 288                        goto eclkrate;
 289
 290                /* set DRVCRB
 291                 *
 292                 * use 1.8 V for VccQ_VIO
 293                 * use 2.85V for VccQ_SR
 294                 */
 295                __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
 296
 297                /* reset clear */
 298                ret = gpio_request(GPIO_PTB4, NULL);
 299                if (ret < 0)
 300                        goto eptb4;
 301                ret = gpio_request(GPIO_PTB7, NULL);
 302                if (ret < 0)
 303                        goto eptb7;
 304
 305                ret = gpio_direction_output(GPIO_PTB4, 1);
 306                if (!ret)
 307                        ret = gpio_direction_output(GPIO_PTB7, 1);
 308                if (ret < 0)
 309                        goto egpioout;
 310                msleep(1);
 311
 312                ret = clk_enable(camera_clk);   /* start VIO_CKO */
 313                if (ret < 0)
 314                        goto eclkon;
 315
 316                return 0;
 317        }
 318
 319        ret = 0;
 320
 321        clk_disable(camera_clk);
 322eclkon:
 323        gpio_set_value(GPIO_PTB7, 0);
 324egpioout:
 325        gpio_set_value(GPIO_PTB4, 0);
 326        gpio_free(GPIO_PTB7);
 327eptb7:
 328        gpio_free(GPIO_PTB4);
 329eptb4:
 330eclkrate:
 331        clk_put(camera_clk);
 332        return ret;
 333}
 334
 335static struct rj54n1_pdata rj54n1_priv = {
 336        .mclk_freq      = CEU_MCLK_FREQ,
 337        .ioctl_high     = false,
 338};
 339
 340static struct soc_camera_link rj54n1_link = {
 341        .power          = camera_power,
 342        .board_info     = &kfr2r09_i2c_camera,
 343        .i2c_adapter_id = 1,
 344        .priv           = &rj54n1_priv,
 345};
 346
 347static struct platform_device kfr2r09_camera = {
 348        .name   = "soc-camera-pdrv",
 349        .id     = 0,
 350        .dev    = {
 351                .platform_data = &rj54n1_link,
 352        },
 353};
 354
 355/* Fixed 3.3V regulator to be used by SDHI0 */
 356static struct regulator_consumer_supply fixed3v3_power_consumers[] =
 357{
 358        REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
 359        REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
 360};
 361
 362static struct resource kfr2r09_sh_sdhi0_resources[] = {
 363        [0] = {
 364                .name   = "SDHI0",
 365                .start  = 0x04ce0000,
 366                .end    = 0x04ce00ff,
 367                .flags  = IORESOURCE_MEM,
 368        },
 369        [1] = {
 370                .start  = evt2irq(0xe80),
 371                .flags  = IORESOURCE_IRQ,
 372        },
 373};
 374
 375static struct tmio_mmc_data sh7724_sdhi0_data = {
 376        .chan_priv_tx   = (void *)SHDMA_SLAVE_SDHI0_TX,
 377        .chan_priv_rx   = (void *)SHDMA_SLAVE_SDHI0_RX,
 378        .capabilities   = MMC_CAP_SDIO_IRQ,
 379        .capabilities2  = MMC_CAP2_NO_WRITE_PROTECT,
 380};
 381
 382static struct platform_device kfr2r09_sh_sdhi0_device = {
 383        .name           = "sh_mobile_sdhi",
 384        .num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
 385        .resource       = kfr2r09_sh_sdhi0_resources,
 386        .dev = {
 387                .platform_data  = &sh7724_sdhi0_data,
 388        },
 389};
 390
 391static struct platform_device *kfr2r09_devices[] __initdata = {
 392        &kfr2r09_nor_flash_device,
 393        &kfr2r09_nand_flash_device,
 394        &kfr2r09_sh_keysc_device,
 395        &kfr2r09_sh_lcdc_device,
 396        &kfr2r09_ceu_device,
 397        &kfr2r09_camera,
 398        &kfr2r09_sh_sdhi0_device,
 399};
 400
 401#define BSC_CS0BCR 0xfec10004
 402#define BSC_CS0WCR 0xfec10024
 403#define BSC_CS4BCR 0xfec10010
 404#define BSC_CS4WCR 0xfec10030
 405#define PORT_MSELCRB 0xa4050182
 406
 407#ifdef CONFIG_I2C
 408static int kfr2r09_usb0_gadget_i2c_setup(void)
 409{
 410        struct i2c_adapter *a;
 411        struct i2c_msg msg;
 412        unsigned char buf[2];
 413        int ret;
 414
 415        a = i2c_get_adapter(0);
 416        if (!a)
 417                return -ENODEV;
 418
 419        /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
 420        buf[0] = 0x13;
 421        msg.addr = 0x09;
 422        msg.buf = buf;
 423        msg.len = 1;
 424        msg.flags = 0;
 425        ret = i2c_transfer(a, &msg, 1);
 426        if (ret != 1)
 427                return -ENODEV;
 428
 429        buf[0] = 0;
 430        msg.addr = 0x09;
 431        msg.buf = buf;
 432        msg.len = 1;
 433        msg.flags = I2C_M_RD;
 434        ret = i2c_transfer(a, &msg, 1);
 435        if (ret != 1)
 436                return -ENODEV;
 437
 438        buf[1] = buf[0] | (1 << 1);
 439        buf[0] = 0x13;
 440        msg.addr = 0x09;
 441        msg.buf = buf;
 442        msg.len = 2;
 443        msg.flags = 0;
 444        ret = i2c_transfer(a, &msg, 1);
 445        if (ret != 1)
 446                return -ENODEV;
 447
 448        return 0;
 449}
 450
 451static int kfr2r09_serial_i2c_setup(void)
 452{
 453        struct i2c_adapter *a;
 454        struct i2c_msg msg;
 455        unsigned char buf[2];
 456        int ret;
 457
 458        a = i2c_get_adapter(0);
 459        if (!a)
 460                return -ENODEV;
 461
 462        /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
 463        buf[0] = 0x13;
 464        msg.addr = 0x09;
 465        msg.buf = buf;
 466        msg.len = 1;
 467        msg.flags = 0;
 468        ret = i2c_transfer(a, &msg, 1);
 469        if (ret != 1)
 470                return -ENODEV;
 471
 472        buf[0] = 0;
 473        msg.addr = 0x09;
 474        msg.buf = buf;
 475        msg.len = 1;
 476        msg.flags = I2C_M_RD;
 477        ret = i2c_transfer(a, &msg, 1);
 478        if (ret != 1)
 479                return -ENODEV;
 480
 481        buf[1] = buf[0] | (1 << 6);
 482        buf[0] = 0x13;
 483        msg.addr = 0x09;
 484        msg.buf = buf;
 485        msg.len = 2;
 486        msg.flags = 0;
 487        ret = i2c_transfer(a, &msg, 1);
 488        if (ret != 1)
 489                return -ENODEV;
 490
 491        return 0;
 492}
 493#else
 494static int kfr2r09_usb0_gadget_i2c_setup(void)
 495{
 496        return -ENODEV;
 497}
 498
 499static int kfr2r09_serial_i2c_setup(void)
 500{
 501        return -ENODEV;
 502}
 503#endif
 504
 505static int kfr2r09_usb0_gadget_setup(void)
 506{
 507        int plugged_in;
 508
 509        gpio_request(GPIO_PTN4, NULL); /* USB_DET */
 510        gpio_direction_input(GPIO_PTN4);
 511        plugged_in = gpio_get_value(GPIO_PTN4);
 512        if (!plugged_in)
 513                return -ENODEV; /* no cable plugged in */
 514
 515        if (kfr2r09_usb0_gadget_i2c_setup() != 0)
 516                return -ENODEV; /* unable to configure using i2c */
 517
 518        __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 519        gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
 520        gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
 521        gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
 522        msleep(20); /* wait 20ms to let the clock settle */
 523        clk_enable(clk_get(NULL, "usb0"));
 524        __raw_writew(0x0600, 0xa40501d4);
 525
 526        return 0;
 527}
 528
 529extern char kfr2r09_sdram_enter_start;
 530extern char kfr2r09_sdram_enter_end;
 531extern char kfr2r09_sdram_leave_start;
 532extern char kfr2r09_sdram_leave_end;
 533
 534static int __init kfr2r09_devices_setup(void)
 535{
 536        /* register board specific self-refresh code */
 537        sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
 538                                        SUSP_SH_RSTANDBY,
 539                                        &kfr2r09_sdram_enter_start,
 540                                        &kfr2r09_sdram_enter_end,
 541                                        &kfr2r09_sdram_leave_start,
 542                                        &kfr2r09_sdram_leave_end);
 543
 544        regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
 545                                     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
 546
 547        /* enable SCIF1 serial port for YC401 console support */
 548        gpio_request(GPIO_FN_SCIF1_RXD, NULL);
 549        gpio_request(GPIO_FN_SCIF1_TXD, NULL);
 550        kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
 551        gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
 552        gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
 553
 554        /* setup NOR flash at CS0 */
 555        __raw_writel(0x36db0400, BSC_CS0BCR);
 556        __raw_writel(0x00000500, BSC_CS0WCR);
 557
 558        /* setup NAND flash at CS4 */
 559        __raw_writel(0x36db0400, BSC_CS4BCR);
 560        __raw_writel(0x00000500, BSC_CS4WCR);
 561
 562        /* setup KEYSC pins */
 563        gpio_request(GPIO_FN_KEYOUT0, NULL);
 564        gpio_request(GPIO_FN_KEYOUT1, NULL);
 565        gpio_request(GPIO_FN_KEYOUT2, NULL);
 566        gpio_request(GPIO_FN_KEYOUT3, NULL);
 567        gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
 568        gpio_request(GPIO_FN_KEYIN0, NULL);
 569        gpio_request(GPIO_FN_KEYIN1, NULL);
 570        gpio_request(GPIO_FN_KEYIN2, NULL);
 571        gpio_request(GPIO_FN_KEYIN3, NULL);
 572        gpio_request(GPIO_FN_KEYIN4, NULL);
 573        gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
 574
 575        /* setup LCDC pins for SYS panel */
 576        gpio_request(GPIO_FN_LCDD17, NULL);
 577        gpio_request(GPIO_FN_LCDD16, NULL);
 578        gpio_request(GPIO_FN_LCDD15, NULL);
 579        gpio_request(GPIO_FN_LCDD14, NULL);
 580        gpio_request(GPIO_FN_LCDD13, NULL);
 581        gpio_request(GPIO_FN_LCDD12, NULL);
 582        gpio_request(GPIO_FN_LCDD11, NULL);
 583        gpio_request(GPIO_FN_LCDD10, NULL);
 584        gpio_request(GPIO_FN_LCDD9, NULL);
 585        gpio_request(GPIO_FN_LCDD8, NULL);
 586        gpio_request(GPIO_FN_LCDD7, NULL);
 587        gpio_request(GPIO_FN_LCDD6, NULL);
 588        gpio_request(GPIO_FN_LCDD5, NULL);
 589        gpio_request(GPIO_FN_LCDD4, NULL);
 590        gpio_request(GPIO_FN_LCDD3, NULL);
 591        gpio_request(GPIO_FN_LCDD2, NULL);
 592        gpio_request(GPIO_FN_LCDD1, NULL);
 593        gpio_request(GPIO_FN_LCDD0, NULL);
 594        gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
 595        gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
 596        gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
 597        gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
 598        gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
 599        gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
 600        gpio_direction_output(GPIO_PTE4, 1);
 601        gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
 602        gpio_direction_output(GPIO_PTF4, 1);
 603        gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
 604        gpio_direction_output(GPIO_PTU0, 1);
 605
 606        /* setup USB function */
 607        if (kfr2r09_usb0_gadget_setup() == 0)
 608                platform_device_register(&kfr2r09_usb0_gadget_device);
 609
 610        /* CEU */
 611        gpio_request(GPIO_FN_VIO_CKO, NULL);
 612        gpio_request(GPIO_FN_VIO0_CLK, NULL);
 613        gpio_request(GPIO_FN_VIO0_VD, NULL);
 614        gpio_request(GPIO_FN_VIO0_HD, NULL);
 615        gpio_request(GPIO_FN_VIO0_FLD, NULL);
 616        gpio_request(GPIO_FN_VIO0_D7, NULL);
 617        gpio_request(GPIO_FN_VIO0_D6, NULL);
 618        gpio_request(GPIO_FN_VIO0_D5, NULL);
 619        gpio_request(GPIO_FN_VIO0_D4, NULL);
 620        gpio_request(GPIO_FN_VIO0_D3, NULL);
 621        gpio_request(GPIO_FN_VIO0_D2, NULL);
 622        gpio_request(GPIO_FN_VIO0_D1, NULL);
 623        gpio_request(GPIO_FN_VIO0_D0, NULL);
 624
 625        platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
 626
 627        /* SDHI0 connected to yc304 */
 628        gpio_request(GPIO_FN_SDHI0CD, NULL);
 629        gpio_request(GPIO_FN_SDHI0D3, NULL);
 630        gpio_request(GPIO_FN_SDHI0D2, NULL);
 631        gpio_request(GPIO_FN_SDHI0D1, NULL);
 632        gpio_request(GPIO_FN_SDHI0D0, NULL);
 633        gpio_request(GPIO_FN_SDHI0CMD, NULL);
 634        gpio_request(GPIO_FN_SDHI0CLK, NULL);
 635
 636        i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
 637
 638        return platform_add_devices(kfr2r09_devices,
 639                                    ARRAY_SIZE(kfr2r09_devices));
 640}
 641device_initcall(kfr2r09_devices_setup);
 642
 643/* Return the board specific boot mode pin configuration */
 644static int kfr2r09_mode_pins(void)
 645{
 646        /* MD0=1, MD1=1, MD2=0: Clock Mode 3
 647         * MD3=0: 16-bit Area0 Bus Width
 648         * MD5=1: Little Endian
 649         * MD8=1: Test Mode Disabled
 650         */
 651        return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
 652}
 653
 654/*
 655 * The Machine Vector
 656 */
 657static struct sh_machine_vector mv_kfr2r09 __initmv = {
 658        .mv_name                = "kfr2r09",
 659        .mv_mode_pins           = kfr2r09_mode_pins,
 660};
 661