linux/drivers/gpio/gpio-stmpe.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) ST-Ericsson SA 2010
   3 *
   4 * License Terms: GNU General Public License, version 2
   5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
   6 */
   7
   8#include <linux/init.h>
   9#include <linux/platform_device.h>
  10#include <linux/slab.h>
  11#include <linux/gpio.h>
  12#include <linux/interrupt.h>
  13#include <linux/of.h>
  14#include <linux/mfd/stmpe.h>
  15#include <linux/seq_file.h>
  16#include <linux/bitops.h>
  17
  18/*
  19 * These registers are modified under the irq bus lock and cached to avoid
  20 * unnecessary writes in bus_sync_unlock.
  21 */
  22enum { REG_RE, REG_FE, REG_IE };
  23
  24enum { LSB, CSB, MSB };
  25
  26#define CACHE_NR_REGS   3
  27/* No variant has more than 24 GPIOs */
  28#define CACHE_NR_BANKS  (24 / 8)
  29
  30struct stmpe_gpio {
  31        struct gpio_chip chip;
  32        struct stmpe *stmpe;
  33        struct device *dev;
  34        struct mutex irq_lock;
  35        u32 norequest_mask;
  36        /* Caches of interrupt control registers for bus_lock */
  37        u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
  38        u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
  39};
  40
  41static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
  42{
  43        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
  44        struct stmpe *stmpe = stmpe_gpio->stmpe;
  45        u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
  46        u8 mask = BIT(offset % 8);
  47        int ret;
  48
  49        ret = stmpe_reg_read(stmpe, reg);
  50        if (ret < 0)
  51                return ret;
  52
  53        return !!(ret & mask);
  54}
  55
  56static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
  57{
  58        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
  59        struct stmpe *stmpe = stmpe_gpio->stmpe;
  60        int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
  61        u8 reg = stmpe->regs[which + (offset / 8)];
  62        u8 mask = BIT(offset % 8);
  63
  64        /*
  65         * Some variants have single register for gpio set/clear functionality.
  66         * For them we need to write 0 to clear and 1 to set.
  67         */
  68        if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])
  69                stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);
  70        else
  71                stmpe_reg_write(stmpe, reg, mask);
  72}
  73
  74static int stmpe_gpio_get_direction(struct gpio_chip *chip,
  75                                    unsigned offset)
  76{
  77        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
  78        struct stmpe *stmpe = stmpe_gpio->stmpe;
  79        u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
  80        u8 mask = BIT(offset % 8);
  81        int ret;
  82
  83        ret = stmpe_reg_read(stmpe, reg);
  84        if (ret < 0)
  85                return ret;
  86
  87        return !(ret & mask);
  88}
  89
  90static int stmpe_gpio_direction_output(struct gpio_chip *chip,
  91                                         unsigned offset, int val)
  92{
  93        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
  94        struct stmpe *stmpe = stmpe_gpio->stmpe;
  95        u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
  96        u8 mask = BIT(offset % 8);
  97
  98        stmpe_gpio_set(chip, offset, val);
  99
 100        return stmpe_set_bits(stmpe, reg, mask, mask);
 101}
 102
 103static int stmpe_gpio_direction_input(struct gpio_chip *chip,
 104                                        unsigned offset)
 105{
 106        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 107        struct stmpe *stmpe = stmpe_gpio->stmpe;
 108        u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
 109        u8 mask = BIT(offset % 8);
 110
 111        return stmpe_set_bits(stmpe, reg, mask, 0);
 112}
 113
 114static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
 115{
 116        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
 117        struct stmpe *stmpe = stmpe_gpio->stmpe;
 118
 119        if (stmpe_gpio->norequest_mask & BIT(offset))
 120                return -EINVAL;
 121
 122        return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
 123}
 124
 125static const struct gpio_chip template_chip = {
 126        .label                  = "stmpe",
 127        .owner                  = THIS_MODULE,
 128        .get_direction          = stmpe_gpio_get_direction,
 129        .direction_input        = stmpe_gpio_direction_input,
 130        .get                    = stmpe_gpio_get,
 131        .direction_output       = stmpe_gpio_direction_output,
 132        .set                    = stmpe_gpio_set,
 133        .request                = stmpe_gpio_request,
 134        .can_sleep              = true,
 135};
 136
 137static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 138{
 139        struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 140        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
 141        int offset = d->hwirq;
 142        int regoffset = offset / 8;
 143        int mask = BIT(offset % 8);
 144
 145        if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
 146                return -EINVAL;
 147
 148        /* STMPE801 and STMPE 1600 don't have RE and FE registers */
 149        if (stmpe_gpio->stmpe->partnum == STMPE801 ||
 150            stmpe_gpio->stmpe->partnum == STMPE1600)
 151                return 0;
 152
 153        if (type & IRQ_TYPE_EDGE_RISING)
 154                stmpe_gpio->regs[REG_RE][regoffset] |= mask;
 155        else
 156                stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
 157
 158        if (type & IRQ_TYPE_EDGE_FALLING)
 159                stmpe_gpio->regs[REG_FE][regoffset] |= mask;
 160        else
 161                stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
 162
 163        return 0;
 164}
 165
 166static void stmpe_gpio_irq_lock(struct irq_data *d)
 167{
 168        struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 169        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
 170
 171        mutex_lock(&stmpe_gpio->irq_lock);
 172}
 173
 174static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
 175{
 176        struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 177        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
 178        struct stmpe *stmpe = stmpe_gpio->stmpe;
 179        int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
 180        static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = {
 181                [REG_RE][LSB] = STMPE_IDX_GPRER_LSB,
 182                [REG_RE][CSB] = STMPE_IDX_GPRER_CSB,
 183                [REG_RE][MSB] = STMPE_IDX_GPRER_MSB,
 184                [REG_FE][LSB] = STMPE_IDX_GPFER_LSB,
 185                [REG_FE][CSB] = STMPE_IDX_GPFER_CSB,
 186                [REG_FE][MSB] = STMPE_IDX_GPFER_MSB,
 187                [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB,
 188                [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB,
 189                [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB,
 190        };
 191        int i, j;
 192
 193        /*
 194         * STMPE1600: to be able to get IRQ from pins,
 195         * a read must be done on GPMR register, or a write in
 196         * GPSR or GPCR registers
 197         */
 198        if (stmpe->partnum == STMPE1600) {
 199                stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
 200                stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
 201        }
 202
 203        for (i = 0; i < CACHE_NR_REGS; i++) {
 204                /* STMPE801 and STMPE1600 don't have RE and FE registers */
 205                if ((stmpe->partnum == STMPE801 ||
 206                     stmpe->partnum == STMPE1600) &&
 207                     (i != REG_IE))
 208                        continue;
 209
 210                for (j = 0; j < num_banks; j++) {
 211                        u8 old = stmpe_gpio->oldregs[i][j];
 212                        u8 new = stmpe_gpio->regs[i][j];
 213
 214                        if (new == old)
 215                                continue;
 216
 217                        stmpe_gpio->oldregs[i][j] = new;
 218                        stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new);
 219                }
 220        }
 221
 222        mutex_unlock(&stmpe_gpio->irq_lock);
 223}
 224
 225static void stmpe_gpio_irq_mask(struct irq_data *d)
 226{
 227        struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 228        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
 229        int offset = d->hwirq;
 230        int regoffset = offset / 8;
 231        int mask = BIT(offset % 8);
 232
 233        stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
 234}
 235
 236static void stmpe_gpio_irq_unmask(struct irq_data *d)
 237{
 238        struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 239        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
 240        int offset = d->hwirq;
 241        int regoffset = offset / 8;
 242        int mask = BIT(offset % 8);
 243
 244        stmpe_gpio->regs[REG_IE][regoffset] |= mask;
 245}
 246
 247static void stmpe_dbg_show_one(struct seq_file *s,
 248                               struct gpio_chip *gc,
 249                               unsigned offset, unsigned gpio)
 250{
 251        struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
 252        struct stmpe *stmpe = stmpe_gpio->stmpe;
 253        const char *label = gpiochip_is_requested(gc, offset);
 254        bool val = !!stmpe_gpio_get(gc, offset);
 255        u8 bank = offset / 8;
 256        u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
 257        u8 mask = BIT(offset % 8);
 258        int ret;
 259        u8 dir;
 260
 261        ret = stmpe_reg_read(stmpe, dir_reg);
 262        if (ret < 0)
 263                return;
 264        dir = !!(ret & mask);
 265
 266        if (dir) {
 267                seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
 268                           gpio, label ?: "(none)",
 269                           val ? "hi" : "lo");
 270        } else {
 271                u8 edge_det_reg;
 272                u8 rise_reg;
 273                u8 fall_reg;
 274                u8 irqen_reg;
 275
 276                static const char * const edge_det_values[] = {
 277                        "edge-inactive",
 278                        "edge-asserted",
 279                        "not-supported"
 280                };
 281                static const char * const rise_values[] = {
 282                        "no-rising-edge-detection",
 283                        "rising-edge-detection",
 284                        "not-supported"
 285                };
 286                static const char * const fall_values[] = {
 287                        "no-falling-edge-detection",
 288                        "falling-edge-detection",
 289                        "not-supported"
 290                };
 291                #define NOT_SUPPORTED_IDX 2
 292                u8 edge_det = NOT_SUPPORTED_IDX;
 293                u8 rise = NOT_SUPPORTED_IDX;
 294                u8 fall = NOT_SUPPORTED_IDX;
 295                bool irqen;
 296
 297                switch (stmpe->partnum) {
 298                case STMPE610:
 299                case STMPE811:
 300                case STMPE1601:
 301                case STMPE2401:
 302                case STMPE2403:
 303                        edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank];
 304                        ret = stmpe_reg_read(stmpe, edge_det_reg);
 305                        if (ret < 0)
 306                                return;
 307                        edge_det = !!(ret & mask);
 308                        /* fall through */
 309                case STMPE1801:
 310                        rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
 311                        fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
 312
 313                        ret = stmpe_reg_read(stmpe, rise_reg);
 314                        if (ret < 0)
 315                                return;
 316                        rise = !!(ret & mask);
 317                        ret = stmpe_reg_read(stmpe, fall_reg);
 318                        if (ret < 0)
 319                                return;
 320                        fall = !!(ret & mask);
 321                        /* fall through */
 322                case STMPE801:
 323                case STMPE1600:
 324                        irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
 325                        break;
 326
 327                default:
 328                        return;
 329                }
 330
 331                ret = stmpe_reg_read(stmpe, irqen_reg);
 332                if (ret < 0)
 333                        return;
 334                irqen = !!(ret & mask);
 335
 336                seq_printf(s, " gpio-%-3d (%-20.20s) in  %s %13s %13s %25s %25s",
 337                           gpio, label ?: "(none)",
 338                           val ? "hi" : "lo",
 339                           edge_det_values[edge_det],
 340                           irqen ? "IRQ-enabled" : "IRQ-disabled",
 341                           rise_values[rise],
 342                           fall_values[fall]);
 343        }
 344}
 345
 346static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 347{
 348        unsigned i;
 349        unsigned gpio = gc->base;
 350
 351        for (i = 0; i < gc->ngpio; i++, gpio++) {
 352                stmpe_dbg_show_one(s, gc, i, gpio);
 353                seq_putc(s, '\n');
 354        }
 355}
 356
 357static struct irq_chip stmpe_gpio_irq_chip = {
 358        .name                   = "stmpe-gpio",
 359        .irq_bus_lock           = stmpe_gpio_irq_lock,
 360        .irq_bus_sync_unlock    = stmpe_gpio_irq_sync_unlock,
 361        .irq_mask               = stmpe_gpio_irq_mask,
 362        .irq_unmask             = stmpe_gpio_irq_unmask,
 363        .irq_set_type           = stmpe_gpio_irq_set_type,
 364};
 365
 366static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
 367{
 368        struct stmpe_gpio *stmpe_gpio = dev;
 369        struct stmpe *stmpe = stmpe_gpio->stmpe;
 370        u8 statmsbreg;
 371        int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
 372        u8 status[num_banks];
 373        int ret;
 374        int i;
 375
 376        /*
 377         * the stmpe_block_read() call below, imposes to set statmsbreg
 378         * with the register located at the lowest address. As STMPE1600
 379         * variant is the only one which respect registers address's order
 380         * (LSB regs located at lowest address than MSB ones) whereas all
 381         * the others have a registers layout with MSB located before the
 382         * LSB regs.
 383         */
 384        if (stmpe->partnum == STMPE1600)
 385                statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB];
 386        else
 387                statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
 388
 389        ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
 390        if (ret < 0)
 391                return IRQ_NONE;
 392
 393        for (i = 0; i < num_banks; i++) {
 394                int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i :
 395                           num_banks - i - 1;
 396                unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
 397                unsigned int stat = status[i];
 398
 399                stat &= enabled;
 400                if (!stat)
 401                        continue;
 402
 403                while (stat) {
 404                        int bit = __ffs(stat);
 405                        int line = bank * 8 + bit;
 406                        int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain,
 407                                                         line);
 408
 409                        handle_nested_irq(child_irq);
 410                        stat &= ~BIT(bit);
 411                }
 412
 413                /*
 414                 * interrupt status register write has no effect on
 415                 * 801/1801/1600, bits are cleared when read.
 416                 * Edge detect register is not present on 801/1600/1801
 417                 */
 418                if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 &&
 419                    stmpe->partnum != STMPE1801) {
 420                        stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
 421                        stmpe_reg_write(stmpe,
 422                                        stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
 423                                        status[i]);
 424                }
 425        }
 426
 427        return IRQ_HANDLED;
 428}
 429
 430static int stmpe_gpio_probe(struct platform_device *pdev)
 431{
 432        struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
 433        struct device_node *np = pdev->dev.of_node;
 434        struct stmpe_gpio *stmpe_gpio;
 435        int ret, irq;
 436
 437        stmpe_gpio = kzalloc(sizeof(*stmpe_gpio), GFP_KERNEL);
 438        if (!stmpe_gpio)
 439                return -ENOMEM;
 440
 441        mutex_init(&stmpe_gpio->irq_lock);
 442
 443        stmpe_gpio->dev = &pdev->dev;
 444        stmpe_gpio->stmpe = stmpe;
 445        stmpe_gpio->chip = template_chip;
 446        stmpe_gpio->chip.ngpio = stmpe->num_gpios;
 447        stmpe_gpio->chip.parent = &pdev->dev;
 448        stmpe_gpio->chip.of_node = np;
 449        stmpe_gpio->chip.base = -1;
 450
 451        if (IS_ENABLED(CONFIG_DEBUG_FS))
 452                stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
 453
 454        of_property_read_u32(np, "st,norequest-mask",
 455                        &stmpe_gpio->norequest_mask);
 456        if (stmpe_gpio->norequest_mask)
 457                stmpe_gpio->chip.irq.need_valid_mask = true;
 458
 459        irq = platform_get_irq(pdev, 0);
 460        if (irq < 0)
 461                dev_info(&pdev->dev,
 462                        "device configured in no-irq mode: "
 463                        "irqs are not available\n");
 464
 465        ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
 466        if (ret)
 467                goto out_free;
 468
 469        ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio);
 470        if (ret) {
 471                dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
 472                goto out_disable;
 473        }
 474
 475        if (irq > 0) {
 476                ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 477                                stmpe_gpio_irq, IRQF_ONESHOT,
 478                                "stmpe-gpio", stmpe_gpio);
 479                if (ret) {
 480                        dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
 481                        goto out_disable;
 482                }
 483                if (stmpe_gpio->norequest_mask) {
 484                        int i;
 485
 486                        /* Forbid unused lines to be mapped as IRQs */
 487                        for (i = 0; i < sizeof(u32); i++)
 488                                if (stmpe_gpio->norequest_mask & BIT(i))
 489                                        clear_bit(i, stmpe_gpio->chip.irq.valid_mask);
 490                }
 491                ret =  gpiochip_irqchip_add_nested(&stmpe_gpio->chip,
 492                                                   &stmpe_gpio_irq_chip,
 493                                                   0,
 494                                                   handle_simple_irq,
 495                                                   IRQ_TYPE_NONE);
 496                if (ret) {
 497                        dev_err(&pdev->dev,
 498                                "could not connect irqchip to gpiochip\n");
 499                        goto out_disable;
 500                }
 501
 502                gpiochip_set_nested_irqchip(&stmpe_gpio->chip,
 503                                            &stmpe_gpio_irq_chip,
 504                                            irq);
 505        }
 506
 507        platform_set_drvdata(pdev, stmpe_gpio);
 508
 509        return 0;
 510
 511out_disable:
 512        stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 513        gpiochip_remove(&stmpe_gpio->chip);
 514out_free:
 515        kfree(stmpe_gpio);
 516        return ret;
 517}
 518
 519static struct platform_driver stmpe_gpio_driver = {
 520        .driver = {
 521                .suppress_bind_attrs    = true,
 522                .name                   = "stmpe-gpio",
 523        },
 524        .probe          = stmpe_gpio_probe,
 525};
 526
 527static int __init stmpe_gpio_init(void)
 528{
 529        return platform_driver_register(&stmpe_gpio_driver);
 530}
 531subsys_initcall(stmpe_gpio_init);
 532