1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26#include <linux/kernel.h>
27#include <linux/module.h>
28#include <linux/i2c.h>
29#include <linux/input.h>
30#include <linux/input-polldev.h>
31#include <linux/interrupt.h>
32#include <linux/delay.h>
33#include <linux/slab.h>
34#include <linux/pm.h>
35#include <linux/pm_runtime.h>
36#include <linux/bma150.h>
37
38#define ABSMAX_ACC_VAL 0x01FF
39#define ABSMIN_ACC_VAL -(ABSMAX_ACC_VAL)
40
41
42#define BMA150_XYZ_DATA_SIZE 6
43
44
45#define BMA150_POLL_INTERVAL 10
46#define BMA150_POLL_MAX 200
47#define BMA150_POLL_MIN 0
48
49#define BMA150_MODE_NORMAL 0
50#define BMA150_MODE_SLEEP 2
51#define BMA150_MODE_WAKE_UP 3
52
53
54#define BMA150_DATA_0_REG 0x00
55#define BMA150_DATA_1_REG 0x01
56#define BMA150_DATA_2_REG 0x02
57
58
59#define BMA150_CTRL_0_REG 0x0A
60#define BMA150_CTRL_1_REG 0x0B
61#define BMA150_CTRL_2_REG 0x14
62#define BMA150_CTRL_3_REG 0x15
63
64
65#define BMA150_CFG_0_REG 0x0C
66#define BMA150_CFG_1_REG 0x0D
67#define BMA150_CFG_2_REG 0x0E
68#define BMA150_CFG_3_REG 0x0F
69#define BMA150_CFG_4_REG 0x10
70#define BMA150_CFG_5_REG 0x11
71
72#define BMA150_CHIP_ID 2
73#define BMA150_CHIP_ID_REG BMA150_DATA_0_REG
74
75#define BMA150_ACC_X_LSB_REG BMA150_DATA_2_REG
76
77#define BMA150_SLEEP_POS 0
78#define BMA150_SLEEP_MSK 0x01
79#define BMA150_SLEEP_REG BMA150_CTRL_0_REG
80
81#define BMA150_BANDWIDTH_POS 0
82#define BMA150_BANDWIDTH_MSK 0x07
83#define BMA150_BANDWIDTH_REG BMA150_CTRL_2_REG
84
85#define BMA150_RANGE_POS 3
86#define BMA150_RANGE_MSK 0x18
87#define BMA150_RANGE_REG BMA150_CTRL_2_REG
88
89#define BMA150_WAKE_UP_POS 0
90#define BMA150_WAKE_UP_MSK 0x01
91#define BMA150_WAKE_UP_REG BMA150_CTRL_3_REG
92
93#define BMA150_SW_RES_POS 1
94#define BMA150_SW_RES_MSK 0x02
95#define BMA150_SW_RES_REG BMA150_CTRL_0_REG
96
97
98#define BMA150_ANY_MOTION_EN_POS 6
99#define BMA150_ANY_MOTION_EN_MSK 0x40
100#define BMA150_ANY_MOTION_EN_REG BMA150_CTRL_1_REG
101
102#define BMA150_ANY_MOTION_DUR_POS 6
103#define BMA150_ANY_MOTION_DUR_MSK 0xC0
104#define BMA150_ANY_MOTION_DUR_REG BMA150_CFG_5_REG
105
106#define BMA150_ANY_MOTION_THRES_REG BMA150_CFG_4_REG
107
108
109#define BMA150_ADV_INT_EN_POS 6
110#define BMA150_ADV_INT_EN_MSK 0x40
111#define BMA150_ADV_INT_EN_REG BMA150_CTRL_3_REG
112
113
114#define BMA150_HIGH_G_EN_POS 1
115#define BMA150_HIGH_G_EN_MSK 0x02
116#define BMA150_HIGH_G_EN_REG BMA150_CTRL_1_REG
117
118#define BMA150_HIGH_G_HYST_POS 3
119#define BMA150_HIGH_G_HYST_MSK 0x38
120#define BMA150_HIGH_G_HYST_REG BMA150_CFG_5_REG
121
122#define BMA150_HIGH_G_DUR_REG BMA150_CFG_3_REG
123#define BMA150_HIGH_G_THRES_REG BMA150_CFG_2_REG
124
125
126#define BMA150_LOW_G_EN_POS 0
127#define BMA150_LOW_G_EN_MSK 0x01
128#define BMA150_LOW_G_EN_REG BMA150_CTRL_1_REG
129
130#define BMA150_LOW_G_HYST_POS 0
131#define BMA150_LOW_G_HYST_MSK 0x07
132#define BMA150_LOW_G_HYST_REG BMA150_CFG_5_REG
133
134#define BMA150_LOW_G_DUR_REG BMA150_CFG_1_REG
135#define BMA150_LOW_G_THRES_REG BMA150_CFG_0_REG
136
137struct bma150_data {
138 struct i2c_client *client;
139 struct input_polled_dev *input_polled;
140 struct input_dev *input;
141 u8 mode;
142};
143
144
145
146
147
148
149static const struct bma150_cfg default_cfg = {
150 .any_motion_int = 1,
151 .hg_int = 1,
152 .lg_int = 1,
153 .any_motion_dur = 0,
154 .any_motion_thres = 0,
155 .hg_hyst = 0,
156 .hg_dur = 150,
157 .hg_thres = 160,
158 .lg_hyst = 0,
159 .lg_dur = 150,
160 .lg_thres = 20,
161 .range = BMA150_RANGE_2G,
162 .bandwidth = BMA150_BW_50HZ
163};
164
165static int bma150_write_byte(struct i2c_client *client, u8 reg, u8 val)
166{
167 s32 ret;
168
169
170 if (client->irq)
171 disable_irq_nosync(client->irq);
172
173 ret = i2c_smbus_write_byte_data(client, reg, val);
174
175 if (client->irq)
176 enable_irq(client->irq);
177
178 return ret;
179}
180
181static int bma150_set_reg_bits(struct i2c_client *client,
182 int val, int shift, u8 mask, u8 reg)
183{
184 int data;
185
186 data = i2c_smbus_read_byte_data(client, reg);
187 if (data < 0)
188 return data;
189
190 data = (data & ~mask) | ((val << shift) & mask);
191 return bma150_write_byte(client, reg, data);
192}
193
194static int bma150_set_mode(struct bma150_data *bma150, u8 mode)
195{
196 int error;
197
198 error = bma150_set_reg_bits(bma150->client, mode, BMA150_WAKE_UP_POS,
199 BMA150_WAKE_UP_MSK, BMA150_WAKE_UP_REG);
200 if (error)
201 return error;
202
203 error = bma150_set_reg_bits(bma150->client, mode, BMA150_SLEEP_POS,
204 BMA150_SLEEP_MSK, BMA150_SLEEP_REG);
205 if (error)
206 return error;
207
208 if (mode == BMA150_MODE_NORMAL)
209 usleep_range(2000, 2100);
210
211 bma150->mode = mode;
212 return 0;
213}
214
215static int bma150_soft_reset(struct bma150_data *bma150)
216{
217 int error;
218
219 error = bma150_set_reg_bits(bma150->client, 1, BMA150_SW_RES_POS,
220 BMA150_SW_RES_MSK, BMA150_SW_RES_REG);
221 if (error)
222 return error;
223
224 usleep_range(2000, 2100);
225 return 0;
226}
227
228static int bma150_set_range(struct bma150_data *bma150, u8 range)
229{
230 return bma150_set_reg_bits(bma150->client, range, BMA150_RANGE_POS,
231 BMA150_RANGE_MSK, BMA150_RANGE_REG);
232}
233
234static int bma150_set_bandwidth(struct bma150_data *bma150, u8 bw)
235{
236 return bma150_set_reg_bits(bma150->client, bw, BMA150_BANDWIDTH_POS,
237 BMA150_BANDWIDTH_MSK, BMA150_BANDWIDTH_REG);
238}
239
240static int bma150_set_low_g_interrupt(struct bma150_data *bma150,
241 u8 enable, u8 hyst, u8 dur, u8 thres)
242{
243 int error;
244
245 error = bma150_set_reg_bits(bma150->client, hyst,
246 BMA150_LOW_G_HYST_POS, BMA150_LOW_G_HYST_MSK,
247 BMA150_LOW_G_HYST_REG);
248 if (error)
249 return error;
250
251 error = bma150_write_byte(bma150->client, BMA150_LOW_G_DUR_REG, dur);
252 if (error)
253 return error;
254
255 error = bma150_write_byte(bma150->client, BMA150_LOW_G_THRES_REG, thres);
256 if (error)
257 return error;
258
259 return bma150_set_reg_bits(bma150->client, !!enable,
260 BMA150_LOW_G_EN_POS, BMA150_LOW_G_EN_MSK,
261 BMA150_LOW_G_EN_REG);
262}
263
264static int bma150_set_high_g_interrupt(struct bma150_data *bma150,
265 u8 enable, u8 hyst, u8 dur, u8 thres)
266{
267 int error;
268
269 error = bma150_set_reg_bits(bma150->client, hyst,
270 BMA150_HIGH_G_HYST_POS, BMA150_HIGH_G_HYST_MSK,
271 BMA150_HIGH_G_HYST_REG);
272 if (error)
273 return error;
274
275 error = bma150_write_byte(bma150->client,
276 BMA150_HIGH_G_DUR_REG, dur);
277 if (error)
278 return error;
279
280 error = bma150_write_byte(bma150->client,
281 BMA150_HIGH_G_THRES_REG, thres);
282 if (error)
283 return error;
284
285 return bma150_set_reg_bits(bma150->client, !!enable,
286 BMA150_HIGH_G_EN_POS, BMA150_HIGH_G_EN_MSK,
287 BMA150_HIGH_G_EN_REG);
288}
289
290
291static int bma150_set_any_motion_interrupt(struct bma150_data *bma150,
292 u8 enable, u8 dur, u8 thres)
293{
294 int error;
295
296 error = bma150_set_reg_bits(bma150->client, dur,
297 BMA150_ANY_MOTION_DUR_POS,
298 BMA150_ANY_MOTION_DUR_MSK,
299 BMA150_ANY_MOTION_DUR_REG);
300 if (error)
301 return error;
302
303 error = bma150_write_byte(bma150->client,
304 BMA150_ANY_MOTION_THRES_REG, thres);
305 if (error)
306 return error;
307
308 error = bma150_set_reg_bits(bma150->client, !!enable,
309 BMA150_ADV_INT_EN_POS, BMA150_ADV_INT_EN_MSK,
310 BMA150_ADV_INT_EN_REG);
311 if (error)
312 return error;
313
314 return bma150_set_reg_bits(bma150->client, !!enable,
315 BMA150_ANY_MOTION_EN_POS,
316 BMA150_ANY_MOTION_EN_MSK,
317 BMA150_ANY_MOTION_EN_REG);
318}
319
320static void bma150_report_xyz(struct bma150_data *bma150)
321{
322 u8 data[BMA150_XYZ_DATA_SIZE];
323 s16 x, y, z;
324 s32 ret;
325
326 ret = i2c_smbus_read_i2c_block_data(bma150->client,
327 BMA150_ACC_X_LSB_REG, BMA150_XYZ_DATA_SIZE, data);
328 if (ret != BMA150_XYZ_DATA_SIZE)
329 return;
330
331 x = ((0xc0 & data[0]) >> 6) | (data[1] << 2);
332 y = ((0xc0 & data[2]) >> 6) | (data[3] << 2);
333 z = ((0xc0 & data[4]) >> 6) | (data[5] << 2);
334
335 x = sign_extend32(x, 9);
336 y = sign_extend32(y, 9);
337 z = sign_extend32(z, 9);
338
339 input_report_abs(bma150->input, ABS_X, x);
340 input_report_abs(bma150->input, ABS_Y, y);
341 input_report_abs(bma150->input, ABS_Z, z);
342 input_sync(bma150->input);
343}
344
345static irqreturn_t bma150_irq_thread(int irq, void *dev)
346{
347 bma150_report_xyz(dev);
348
349 return IRQ_HANDLED;
350}
351
352static void bma150_poll(struct input_polled_dev *dev)
353{
354 bma150_report_xyz(dev->private);
355}
356
357static int bma150_open(struct bma150_data *bma150)
358{
359 int error;
360
361 error = pm_runtime_get_sync(&bma150->client->dev);
362 if (error < 0 && error != -ENOSYS)
363 return error;
364
365
366
367
368
369 if (bma150->mode != BMA150_MODE_NORMAL) {
370 error = bma150_set_mode(bma150, BMA150_MODE_NORMAL);
371 if (error)
372 return error;
373 }
374
375 return 0;
376}
377
378static void bma150_close(struct bma150_data *bma150)
379{
380 pm_runtime_put_sync(&bma150->client->dev);
381
382 if (bma150->mode != BMA150_MODE_SLEEP)
383 bma150_set_mode(bma150, BMA150_MODE_SLEEP);
384}
385
386static int bma150_irq_open(struct input_dev *input)
387{
388 struct bma150_data *bma150 = input_get_drvdata(input);
389
390 return bma150_open(bma150);
391}
392
393static void bma150_irq_close(struct input_dev *input)
394{
395 struct bma150_data *bma150 = input_get_drvdata(input);
396
397 bma150_close(bma150);
398}
399
400static void bma150_poll_open(struct input_polled_dev *ipoll_dev)
401{
402 struct bma150_data *bma150 = ipoll_dev->private;
403
404 bma150_open(bma150);
405}
406
407static void bma150_poll_close(struct input_polled_dev *ipoll_dev)
408{
409 struct bma150_data *bma150 = ipoll_dev->private;
410
411 bma150_close(bma150);
412}
413
414static int bma150_initialize(struct bma150_data *bma150,
415 const struct bma150_cfg *cfg)
416{
417 int error;
418
419 error = bma150_soft_reset(bma150);
420 if (error)
421 return error;
422
423 error = bma150_set_bandwidth(bma150, cfg->bandwidth);
424 if (error)
425 return error;
426
427 error = bma150_set_range(bma150, cfg->range);
428 if (error)
429 return error;
430
431 if (bma150->client->irq) {
432 error = bma150_set_any_motion_interrupt(bma150,
433 cfg->any_motion_int,
434 cfg->any_motion_dur,
435 cfg->any_motion_thres);
436 if (error)
437 return error;
438
439 error = bma150_set_high_g_interrupt(bma150,
440 cfg->hg_int, cfg->hg_hyst,
441 cfg->hg_dur, cfg->hg_thres);
442 if (error)
443 return error;
444
445 error = bma150_set_low_g_interrupt(bma150,
446 cfg->lg_int, cfg->lg_hyst,
447 cfg->lg_dur, cfg->lg_thres);
448 if (error)
449 return error;
450 }
451
452 return bma150_set_mode(bma150, BMA150_MODE_SLEEP);
453}
454
455static void bma150_init_input_device(struct bma150_data *bma150,
456 struct input_dev *idev)
457{
458 idev->name = BMA150_DRIVER;
459 idev->phys = BMA150_DRIVER "/input0";
460 idev->id.bustype = BUS_I2C;
461 idev->dev.parent = &bma150->client->dev;
462
463 idev->evbit[0] = BIT_MASK(EV_ABS);
464 input_set_abs_params(idev, ABS_X, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
465 input_set_abs_params(idev, ABS_Y, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
466 input_set_abs_params(idev, ABS_Z, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
467}
468
469static int bma150_register_input_device(struct bma150_data *bma150)
470{
471 struct input_dev *idev;
472 int error;
473
474 idev = input_allocate_device();
475 if (!idev)
476 return -ENOMEM;
477
478 bma150_init_input_device(bma150, idev);
479
480 idev->open = bma150_irq_open;
481 idev->close = bma150_irq_close;
482 input_set_drvdata(idev, bma150);
483
484 error = input_register_device(idev);
485 if (error) {
486 input_free_device(idev);
487 return error;
488 }
489
490 bma150->input = idev;
491 return 0;
492}
493
494static int bma150_register_polled_device(struct bma150_data *bma150)
495{
496 struct input_polled_dev *ipoll_dev;
497 int error;
498
499 ipoll_dev = input_allocate_polled_device();
500 if (!ipoll_dev)
501 return -ENOMEM;
502
503 ipoll_dev->private = bma150;
504 ipoll_dev->open = bma150_poll_open;
505 ipoll_dev->close = bma150_poll_close;
506 ipoll_dev->poll = bma150_poll;
507 ipoll_dev->poll_interval = BMA150_POLL_INTERVAL;
508 ipoll_dev->poll_interval_min = BMA150_POLL_MIN;
509 ipoll_dev->poll_interval_max = BMA150_POLL_MAX;
510
511 bma150_init_input_device(bma150, ipoll_dev->input);
512
513 error = input_register_polled_device(ipoll_dev);
514 if (error) {
515 input_free_polled_device(ipoll_dev);
516 return error;
517 }
518
519 bma150->input_polled = ipoll_dev;
520 bma150->input = ipoll_dev->input;
521
522 return 0;
523}
524
525static int bma150_probe(struct i2c_client *client,
526 const struct i2c_device_id *id)
527{
528 const struct bma150_platform_data *pdata =
529 dev_get_platdata(&client->dev);
530 const struct bma150_cfg *cfg;
531 struct bma150_data *bma150;
532 int chip_id;
533 int error;
534
535 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
536 dev_err(&client->dev, "i2c_check_functionality error\n");
537 return -EIO;
538 }
539
540 chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG);
541 if (chip_id != BMA150_CHIP_ID) {
542 dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id);
543 return -EINVAL;
544 }
545
546 bma150 = kzalloc(sizeof(struct bma150_data), GFP_KERNEL);
547 if (!bma150)
548 return -ENOMEM;
549
550 bma150->client = client;
551
552 if (pdata) {
553 if (pdata->irq_gpio_cfg) {
554 error = pdata->irq_gpio_cfg();
555 if (error) {
556 dev_err(&client->dev,
557 "IRQ GPIO conf. error %d, error %d\n",
558 client->irq, error);
559 goto err_free_mem;
560 }
561 }
562 cfg = &pdata->cfg;
563 } else {
564 cfg = &default_cfg;
565 }
566
567 error = bma150_initialize(bma150, cfg);
568 if (error)
569 goto err_free_mem;
570
571 if (client->irq > 0) {
572 error = bma150_register_input_device(bma150);
573 if (error)
574 goto err_free_mem;
575
576 error = request_threaded_irq(client->irq,
577 NULL, bma150_irq_thread,
578 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
579 BMA150_DRIVER, bma150);
580 if (error) {
581 dev_err(&client->dev,
582 "irq request failed %d, error %d\n",
583 client->irq, error);
584 input_unregister_device(bma150->input);
585 goto err_free_mem;
586 }
587 } else {
588 error = bma150_register_polled_device(bma150);
589 if (error)
590 goto err_free_mem;
591 }
592
593 i2c_set_clientdata(client, bma150);
594
595 pm_runtime_enable(&client->dev);
596
597 return 0;
598
599err_free_mem:
600 kfree(bma150);
601 return error;
602}
603
604static int bma150_remove(struct i2c_client *client)
605{
606 struct bma150_data *bma150 = i2c_get_clientdata(client);
607
608 pm_runtime_disable(&client->dev);
609
610 if (client->irq > 0) {
611 free_irq(client->irq, bma150);
612 input_unregister_device(bma150->input);
613 } else {
614 input_unregister_polled_device(bma150->input_polled);
615 input_free_polled_device(bma150->input_polled);
616 }
617
618 kfree(bma150);
619
620 return 0;
621}
622
623#ifdef CONFIG_PM
624static int bma150_suspend(struct device *dev)
625{
626 struct i2c_client *client = to_i2c_client(dev);
627 struct bma150_data *bma150 = i2c_get_clientdata(client);
628
629 return bma150_set_mode(bma150, BMA150_MODE_SLEEP);
630}
631
632static int bma150_resume(struct device *dev)
633{
634 struct i2c_client *client = to_i2c_client(dev);
635 struct bma150_data *bma150 = i2c_get_clientdata(client);
636
637 return bma150_set_mode(bma150, BMA150_MODE_NORMAL);
638}
639#endif
640
641static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL);
642
643static const struct i2c_device_id bma150_id[] = {
644 { "bma150", 0 },
645 { "smb380", 0 },
646 { "bma023", 0 },
647 { }
648};
649
650MODULE_DEVICE_TABLE(i2c, bma150_id);
651
652static struct i2c_driver bma150_driver = {
653 .driver = {
654 .name = BMA150_DRIVER,
655 .pm = &bma150_pm,
656 },
657 .class = I2C_CLASS_HWMON,
658 .id_table = bma150_id,
659 .probe = bma150_probe,
660 .remove = bma150_remove,
661};
662
663module_i2c_driver(bma150_driver);
664
665MODULE_AUTHOR("Albert Zhang <xu.zhang@bosch-sensortec.com>");
666MODULE_DESCRIPTION("BMA150 driver");
667MODULE_LICENSE("GPL");
668
