linux/drivers/leds/leds-mlxcpld.c
<<
>>
Prefs
   1/*
   2 * drivers/leds/leds-mlxcpld.c
   3 * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
   4 * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
   5 *
   6 * Redistribution and use in source and binary forms, with or without
   7 * modification, are permitted provided that the following conditions are met:
   8 *
   9 * 1. Redistributions of source code must retain the above copyright
  10 *    notice, this list of conditions and the following disclaimer.
  11 * 2. Redistributions in binary form must reproduce the above copyright
  12 *    notice, this list of conditions and the following disclaimer in the
  13 *    documentation and/or other materials provided with the distribution.
  14 * 3. Neither the names of the copyright holders nor the names of its
  15 *    contributors may be used to endorse or promote products derived from
  16 *    this software without specific prior written permission.
  17 *
  18 * Alternatively, this software may be distributed under the terms of the
  19 * GNU General Public License ("GPL") version 2 as published by the Free
  20 * Software Foundation.
  21 *
  22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  26 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  32 * POSSIBILITY OF SUCH DAMAGE.
  33 */
  34
  35#include <linux/acpi.h>
  36#include <linux/device.h>
  37#include <linux/dmi.h>
  38#include <linux/hwmon.h>
  39#include <linux/hwmon-sysfs.h>
  40#include <linux/io.h>
  41#include <linux/leds.h>
  42#include <linux/module.h>
  43#include <linux/mod_devicetable.h>
  44#include <linux/platform_device.h>
  45#include <linux/slab.h>
  46
  47#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR     0x2500 /* LPC bus access */
  48
  49/* Color codes for LEDs */
  50#define MLXCPLD_LED_OFFSET_HALF         0x01 /* Offset from solid: 3Hz blink */
  51#define MLXCPLD_LED_OFFSET_FULL         0x02 /* Offset from solid: 6Hz blink */
  52#define MLXCPLD_LED_IS_OFF              0x00 /* Off */
  53#define MLXCPLD_LED_RED_STATIC_ON       0x05 /* Solid red */
  54#define MLXCPLD_LED_RED_BLINK_HALF      (MLXCPLD_LED_RED_STATIC_ON + \
  55                                         MLXCPLD_LED_OFFSET_HALF)
  56#define MLXCPLD_LED_RED_BLINK_FULL      (MLXCPLD_LED_RED_STATIC_ON + \
  57                                         MLXCPLD_LED_OFFSET_FULL)
  58#define MLXCPLD_LED_GREEN_STATIC_ON     0x0D /* Solid green */
  59#define MLXCPLD_LED_GREEN_BLINK_HALF    (MLXCPLD_LED_GREEN_STATIC_ON + \
  60                                         MLXCPLD_LED_OFFSET_HALF)
  61#define MLXCPLD_LED_GREEN_BLINK_FULL    (MLXCPLD_LED_GREEN_STATIC_ON + \
  62                                         MLXCPLD_LED_OFFSET_FULL)
  63#define MLXCPLD_LED_BLINK_3HZ           167 /* ~167 msec off/on */
  64#define MLXCPLD_LED_BLINK_6HZ           83 /* ~83 msec off/on */
  65
  66/**
  67 * mlxcpld_param - LED access parameters:
  68 * @offset - offset for LED access in CPLD device
  69 * @mask - mask for LED access in CPLD device
  70 * @base_color - base color code for LED
  71**/
  72struct mlxcpld_param {
  73        u8 offset;
  74        u8 mask;
  75        u8 base_color;
  76};
  77
  78/**
  79 * mlxcpld_led_priv - LED private data:
  80 * @cled - LED class device instance
  81 * @param - LED CPLD access parameters
  82**/
  83struct mlxcpld_led_priv {
  84        struct led_classdev cdev;
  85        struct mlxcpld_param param;
  86};
  87
  88#define cdev_to_priv(c)         container_of(c, struct mlxcpld_led_priv, cdev)
  89
  90/**
  91 * mlxcpld_led_profile - system LED profile (defined per system class):
  92 * @offset - offset for LED access in CPLD device
  93 * @mask - mask for LED access in CPLD device
  94 * @base_color - base color code
  95 * @brightness - default brightness setting (on/off)
  96 * @name - LED name
  97**/
  98struct mlxcpld_led_profile {
  99        u8 offset;
 100        u8 mask;
 101        u8 base_color;
 102        enum led_brightness brightness;
 103        const char *name;
 104};
 105
 106/**
 107 * mlxcpld_led_pdata - system LED private data
 108 * @pdev - platform device pointer
 109 * @pled - LED class device instance
 110 * @profile - system configuration profile
 111 * @num_led_instances - number of LED instances
 112 * @lock - device access lock
 113**/
 114struct mlxcpld_led_pdata {
 115        struct platform_device *pdev;
 116        struct mlxcpld_led_priv *pled;
 117        struct mlxcpld_led_profile *profile;
 118        int num_led_instances;
 119        spinlock_t lock;
 120};
 121
 122static struct mlxcpld_led_pdata *mlxcpld_led;
 123
 124/* Default profile fit the next Mellanox systems:
 125 * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
 126 * "msn2410", "msb7800", "msn2740"
 127 */
 128static struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
 129        {
 130                0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 131                "mlxcpld:fan1:green",
 132        },
 133        {
 134                0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 135                "mlxcpld:fan1:red",
 136        },
 137        {
 138                0x21, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 139                "mlxcpld:fan2:green",
 140        },
 141        {
 142                0x21, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 143                "mlxcpld:fan2:red",
 144        },
 145        {
 146                0x22, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 147                "mlxcpld:fan3:green",
 148        },
 149        {
 150                0x22, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 151                "mlxcpld:fan3:red",
 152        },
 153        {
 154                0x22, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 155                "mlxcpld:fan4:green",
 156        },
 157        {
 158                0x22, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 159                "mlxcpld:fan4:red",
 160        },
 161        {
 162                0x20, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 163                "mlxcpld:psu:green",
 164        },
 165        {
 166                0x20, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 167                "mlxcpld:psu:red",
 168        },
 169        {
 170                0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 171                "mlxcpld:status:green",
 172        },
 173        {
 174                0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 175                "mlxcpld:status:red",
 176        },
 177};
 178
 179/* Profile fit the Mellanox systems based on "msn2100" */
 180static struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
 181        {
 182                0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 183                "mlxcpld:fan:green",
 184        },
 185        {
 186                0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 187                "mlxcpld:fan:red",
 188        },
 189        {
 190                0x23, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 191                "mlxcpld:psu1:green",
 192        },
 193        {
 194                0x23, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 195                "mlxcpld:psu1:red",
 196        },
 197        {
 198                0x23, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 199                "mlxcpld:psu2:green",
 200        },
 201        {
 202                0x23, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 203                "mlxcpld:psu2:red",
 204        },
 205        {
 206                0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
 207                "mlxcpld:status:green",
 208        },
 209        {
 210                0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
 211                "mlxcpld:status:red",
 212        },
 213        {
 214                0x24, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, LED_OFF,
 215                "mlxcpld:uid:blue",
 216        },
 217};
 218
 219enum mlxcpld_led_platform_types {
 220        MLXCPLD_LED_PLATFORM_DEFAULT,
 221        MLXCPLD_LED_PLATFORM_MSN2100,
 222};
 223
 224static const char *mlx_product_names[] = {
 225        "DEFAULT",
 226        "MSN2100",
 227};
 228
 229static enum
 230mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
 231{
 232        const char *mlx_product_name;
 233        int i;
 234
 235        mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
 236        if (!mlx_product_name)
 237                return MLXCPLD_LED_PLATFORM_DEFAULT;
 238
 239        for (i = 1;  i < ARRAY_SIZE(mlx_product_names); i++) {
 240                if (strstr(mlx_product_name, mlx_product_names[i]))
 241                        return i;
 242        }
 243
 244        return MLXCPLD_LED_PLATFORM_DEFAULT;
 245}
 246
 247static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
 248                                        u8 *data)
 249{
 250        u32 addr = base + offset;
 251
 252        if (rw_flag == 0)
 253                outb(*data, addr);
 254        else
 255                *data = inb(addr);
 256}
 257
 258static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
 259{
 260        u8 nib, val;
 261
 262        /*
 263         * Each LED is controlled through low or high nibble of the relevant
 264         * CPLD register. Register offset is specified by off parameter.
 265         * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
 266         * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
 267         * green.
 268         * Parameter mask specifies which nibble is used for specific LED: mask
 269         * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
 270         * higher nibble (bits from 4 to 7).
 271         */
 272        spin_lock(&mlxcpld_led->lock);
 273        mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1,
 274                                    &val);
 275        nib = (mask == 0xf0) ? vset : (vset << 4);
 276        val = (val & mask) | nib;
 277        mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0,
 278                                    &val);
 279        spin_unlock(&mlxcpld_led->lock);
 280}
 281
 282static void mlxcpld_led_brightness_set(struct led_classdev *led,
 283                                       enum led_brightness value)
 284{
 285        struct mlxcpld_led_priv *pled = cdev_to_priv(led);
 286
 287        if (value) {
 288                mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
 289                                     pled->param.base_color);
 290                return;
 291        }
 292
 293        mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
 294                             MLXCPLD_LED_IS_OFF);
 295}
 296
 297static int mlxcpld_led_blink_set(struct led_classdev *led,
 298                                 unsigned long *delay_on,
 299                                 unsigned long *delay_off)
 300{
 301        struct mlxcpld_led_priv *pled = cdev_to_priv(led);
 302
 303        /*
 304         * HW supports two types of blinking: full (6Hz) and half (3Hz).
 305         * For delay on/off zero default setting 3Hz is used.
 306         */
 307        if (!(*delay_on == 0 && *delay_off == 0) &&
 308            !(*delay_on == MLXCPLD_LED_BLINK_3HZ &&
 309              *delay_off == MLXCPLD_LED_BLINK_3HZ) &&
 310            !(*delay_on == MLXCPLD_LED_BLINK_6HZ &&
 311              *delay_off == MLXCPLD_LED_BLINK_6HZ))
 312                return -EINVAL;
 313
 314        if (*delay_on == MLXCPLD_LED_BLINK_6HZ)
 315                mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
 316                                     pled->param.base_color +
 317                                     MLXCPLD_LED_OFFSET_FULL);
 318        else
 319                mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
 320                                     pled->param.base_color +
 321                                     MLXCPLD_LED_OFFSET_HALF);
 322
 323        return 0;
 324}
 325
 326static int mlxcpld_led_config(struct device *dev,
 327                              struct mlxcpld_led_pdata *cpld)
 328{
 329        int i;
 330        int err;
 331
 332        cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) *
 333                                  cpld->num_led_instances, GFP_KERNEL);
 334        if (!cpld->pled)
 335                return -ENOMEM;
 336
 337        for (i = 0; i < cpld->num_led_instances; i++) {
 338                cpld->pled[i].cdev.name = cpld->profile[i].name;
 339                cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
 340                cpld->pled[i].cdev.max_brightness = 1;
 341                cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness_set;
 342                cpld->pled[i].cdev.blink_set = mlxcpld_led_blink_set;
 343                cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
 344                err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
 345                if (err)
 346                        return err;
 347
 348                cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
 349                cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
 350                cpld->pled[i].param.base_color =
 351                                        mlxcpld_led->profile[i].base_color;
 352
 353                if (mlxcpld_led->profile[i].brightness)
 354                        mlxcpld_led_brightness_set(&cpld->pled[i].cdev,
 355                                        mlxcpld_led->profile[i].brightness);
 356        }
 357
 358        return 0;
 359}
 360
 361static int __init mlxcpld_led_probe(struct platform_device *pdev)
 362{
 363        enum mlxcpld_led_platform_types mlxcpld_led_plat =
 364                                        mlxcpld_led_platform_check_sys_type();
 365
 366        mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
 367                                   GFP_KERNEL);
 368        if (!mlxcpld_led)
 369                return -ENOMEM;
 370
 371        mlxcpld_led->pdev = pdev;
 372
 373        switch (mlxcpld_led_plat) {
 374        case MLXCPLD_LED_PLATFORM_MSN2100:
 375                mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
 376                mlxcpld_led->num_led_instances =
 377                                ARRAY_SIZE(mlxcpld_led_msn2100_profile);
 378                break;
 379
 380        default:
 381                mlxcpld_led->profile = mlxcpld_led_default_profile;
 382                mlxcpld_led->num_led_instances =
 383                                ARRAY_SIZE(mlxcpld_led_default_profile);
 384                break;
 385        }
 386
 387        spin_lock_init(&mlxcpld_led->lock);
 388
 389        return mlxcpld_led_config(&pdev->dev, mlxcpld_led);
 390}
 391
 392static struct platform_driver mlxcpld_led_driver = {
 393        .driver = {
 394                .name   = KBUILD_MODNAME,
 395        },
 396};
 397
 398static int __init mlxcpld_led_init(void)
 399{
 400        struct platform_device *pdev;
 401        int err;
 402
 403        if (!dmi_match(DMI_CHASSIS_VENDOR, "Mellanox Technologies Ltd."))
 404                return -ENODEV;
 405
 406        pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
 407        if (IS_ERR(pdev)) {
 408                pr_err("Device allocation failed\n");
 409                return PTR_ERR(pdev);
 410        }
 411
 412        err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
 413        if (err) {
 414                pr_err("Probe platform driver failed\n");
 415                platform_device_unregister(pdev);
 416        }
 417
 418        return err;
 419}
 420
 421static void __exit mlxcpld_led_exit(void)
 422{
 423        platform_device_unregister(mlxcpld_led->pdev);
 424        platform_driver_unregister(&mlxcpld_led_driver);
 425}
 426
 427module_init(mlxcpld_led_init);
 428module_exit(mlxcpld_led_exit);
 429
 430MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
 431MODULE_DESCRIPTION("Mellanox board LED driver");
 432MODULE_LICENSE("Dual BSD/GPL");
 433MODULE_ALIAS("platform:leds_mlxcpld");
 434