linux/drivers/net/hamradio/yam.c
<<
>>
Prefs
   1/*****************************************************************************/
   2
   3/*
   4 *    yam.c  -- YAM radio modem driver.
   5 *
   6 *      Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
   7 *      Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
   8 *
   9 *      This program is free software; you can redistribute it and/or modify
  10 *      it under the terms of the GNU General Public License as published by
  11 *      the Free Software Foundation; either version 2 of the License, or
  12 *      (at your option) any later version.
  13 *
  14 *      This program is distributed in the hope that it will be useful,
  15 *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 *      GNU General Public License for more details.
  18 *
  19 *      You should have received a copy of the GNU General Public License
  20 *      along with this program; if not, write to the Free Software
  21 *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 *
  23 *  Please note that the GPL allows you to use the driver, NOT the radio.
  24 *  In order to use the radio, you need a license from the communications
  25 *  authority of your country.
  26 *
  27 *
  28 *  History:
  29 *   0.0 F1OAT 06.06.98  Begin of work with baycom.c source code V 0.3
  30 *   0.1 F1OAT 07.06.98  Add timer polling routine for channel arbitration
  31 *   0.2 F6FBB 08.06.98  Added delay after FPGA programming
  32 *   0.3 F6FBB 29.07.98  Delayed PTT implementation for dupmode=2
  33 *   0.4 F6FBB 30.07.98  Added TxTail, Slottime and Persistence
  34 *   0.5 F6FBB 01.08.98  Shared IRQs, /proc/net and network statistics
  35 *   0.6 F6FBB 25.08.98  Added 1200Bds format
  36 *   0.7 F6FBB 12.09.98  Added to the kernel configuration
  37 *   0.8 F6FBB 14.10.98  Fixed slottime/persistence timing bug
  38 *       OK1ZIA 2.09.01  Fixed "kfree_skb on hard IRQ" 
  39 *                       using dev_kfree_skb_any(). (important in 2.4 kernel)
  40 *   
  41 */
  42
  43/*****************************************************************************/
  44
  45#include <linux/module.h>
  46#include <linux/types.h>
  47#include <linux/net.h>
  48#include <linux/in.h>
  49#include <linux/if.h>
  50#include <linux/slab.h>
  51#include <linux/errno.h>
  52#include <linux/bitops.h>
  53#include <linux/random.h>
  54#include <asm/io.h>
  55#include <linux/interrupt.h>
  56#include <linux/ioport.h>
  57#include <linux/firmware.h>
  58#include <linux/platform_device.h>
  59
  60#include <linux/netdevice.h>
  61#include <linux/if_arp.h>
  62#include <linux/etherdevice.h>
  63#include <linux/skbuff.h>
  64#include <net/ax25.h>
  65
  66#include <linux/kernel.h>
  67#include <linux/proc_fs.h>
  68#include <linux/seq_file.h>
  69#include <net/net_namespace.h>
  70
  71#include <linux/uaccess.h>
  72#include <linux/init.h>
  73
  74#include <linux/yam.h>
  75
  76/* --------------------------------------------------------------------- */
  77
  78static const char yam_drvname[] = "yam";
  79static const char yam_drvinfo[] __initconst = KERN_INFO \
  80        "YAM driver version 0.8 by F1OAT/F6FBB\n";
  81
  82/* --------------------------------------------------------------------- */
  83
  84#define FIRMWARE_9600   "yam/9600.bin"
  85#define FIRMWARE_1200   "yam/1200.bin"
  86
  87#define YAM_9600        1
  88#define YAM_1200        2
  89
  90#define NR_PORTS        4
  91#define YAM_MAGIC       0xF10A7654
  92
  93/* Transmitter states */
  94
  95#define TX_OFF          0
  96#define TX_HEAD         1
  97#define TX_DATA         2
  98#define TX_CRC1         3
  99#define TX_CRC2         4
 100#define TX_TAIL         5
 101
 102#define YAM_MAX_FRAME   1024
 103
 104#define DEFAULT_BITRATE 9600                    /* bps */
 105#define DEFAULT_HOLDD   10                      /* sec */
 106#define DEFAULT_TXD     300                     /* ms */
 107#define DEFAULT_TXTAIL  10                      /* ms */
 108#define DEFAULT_SLOT    100                     /* ms */
 109#define DEFAULT_PERS    64                      /* 0->255 */
 110
 111struct yam_port {
 112        int magic;
 113        int bitrate;
 114        int baudrate;
 115        int iobase;
 116        int irq;
 117        int dupmode;
 118
 119        struct net_device *dev;
 120
 121        int nb_rxint;
 122        int nb_mdint;
 123
 124        /* Parameters section */
 125
 126        int txd;                                /* tx delay */
 127        int holdd;                              /* duplex ptt delay */
 128        int txtail;                             /* txtail delay */
 129        int slot;                               /* slottime */
 130        int pers;                               /* persistence */
 131
 132        /* Tx section */
 133
 134        int tx_state;
 135        int tx_count;
 136        int slotcnt;
 137        unsigned char tx_buf[YAM_MAX_FRAME];
 138        int tx_len;
 139        int tx_crcl, tx_crch;
 140        struct sk_buff_head send_queue;         /* Packets awaiting transmission */
 141
 142        /* Rx section */
 143
 144        int dcd;
 145        unsigned char rx_buf[YAM_MAX_FRAME];
 146        int rx_len;
 147        int rx_crcl, rx_crch;
 148};
 149
 150struct yam_mcs {
 151        unsigned char bits[YAM_FPGA_SIZE];
 152        int bitrate;
 153        struct yam_mcs *next;
 154};
 155
 156static struct net_device *yam_devs[NR_PORTS];
 157
 158static struct yam_mcs *yam_data;
 159
 160static DEFINE_TIMER(yam_timer, NULL);
 161
 162/* --------------------------------------------------------------------- */
 163
 164#define RBR(iobase)     (iobase+0)
 165#define THR(iobase)     (iobase+0)
 166#define IER(iobase)     (iobase+1)
 167#define IIR(iobase)     (iobase+2)
 168#define FCR(iobase)     (iobase+2)
 169#define LCR(iobase)     (iobase+3)
 170#define MCR(iobase)     (iobase+4)
 171#define LSR(iobase)     (iobase+5)
 172#define MSR(iobase)     (iobase+6)
 173#define SCR(iobase)     (iobase+7)
 174#define DLL(iobase)     (iobase+0)
 175#define DLM(iobase)     (iobase+1)
 176
 177#define YAM_EXTENT      8
 178
 179/* Interrupt Identification Register Bit Masks */
 180#define IIR_NOPEND      1
 181#define IIR_MSR         0
 182#define IIR_TX          2
 183#define IIR_RX          4
 184#define IIR_LSR         6
 185#define IIR_TIMEOUT     12                      /* Fifo mode only */
 186
 187#define IIR_MASK        0x0F
 188
 189/* Interrupt Enable Register Bit Masks */
 190#define IER_RX          1                       /* enable rx interrupt */
 191#define IER_TX          2                       /* enable tx interrupt */
 192#define IER_LSR         4                       /* enable line status interrupts */
 193#define IER_MSR         8                       /* enable modem status interrupts */
 194
 195/* Modem Control Register Bit Masks */
 196#define MCR_DTR         0x01                    /* DTR output */
 197#define MCR_RTS         0x02                    /* RTS output */
 198#define MCR_OUT1        0x04                    /* OUT1 output (not accessible in RS232) */
 199#define MCR_OUT2        0x08                    /* Master Interrupt enable (must be set on PCs) */
 200#define MCR_LOOP        0x10                    /* Loopback enable */
 201
 202/* Modem Status Register Bit Masks */
 203#define MSR_DCTS        0x01                    /* Delta CTS input */
 204#define MSR_DDSR        0x02                    /* Delta DSR */
 205#define MSR_DRIN        0x04                    /* Delta RI */
 206#define MSR_DDCD        0x08                    /* Delta DCD */
 207#define MSR_CTS         0x10                    /* CTS input */
 208#define MSR_DSR         0x20                    /* DSR input */
 209#define MSR_RING        0x40                    /* RI  input */
 210#define MSR_DCD         0x80                    /* DCD input */
 211
 212/* line status register bit mask */
 213#define LSR_RXC         0x01
 214#define LSR_OE          0x02
 215#define LSR_PE          0x04
 216#define LSR_FE          0x08
 217#define LSR_BREAK       0x10
 218#define LSR_THRE        0x20
 219#define LSR_TSRE        0x40
 220
 221/* Line Control Register Bit Masks */
 222#define LCR_DLAB        0x80
 223#define LCR_BREAK       0x40
 224#define LCR_PZERO       0x28
 225#define LCR_PEVEN       0x18
 226#define LCR_PODD        0x08
 227#define LCR_STOP1       0x00
 228#define LCR_STOP2       0x04
 229#define LCR_BIT5        0x00
 230#define LCR_BIT6        0x02
 231#define LCR_BIT7        0x01
 232#define LCR_BIT8        0x03
 233
 234/* YAM Modem <-> UART Port mapping */
 235
 236#define TX_RDY          MSR_DCTS                /* transmitter ready to send */
 237#define RX_DCD          MSR_DCD                 /* carrier detect */
 238#define RX_FLAG         MSR_RING                /* hdlc flag received */
 239#define FPGA_DONE       MSR_DSR                 /* FPGA is configured */
 240#define PTT_ON          (MCR_RTS|MCR_OUT2)      /* activate PTT */
 241#define PTT_OFF         (MCR_DTR|MCR_OUT2)      /* release PTT */
 242
 243#define ENABLE_RXINT    IER_RX                  /* enable uart rx interrupt during rx */
 244#define ENABLE_TXINT    IER_MSR                 /* enable uart ms interrupt during tx */
 245#define ENABLE_RTXINT   (IER_RX|IER_MSR)        /* full duplex operations */
 246
 247
 248/*************************************************************************
 249* CRC Tables
 250************************************************************************/
 251
 252static const unsigned char chktabl[256] =
 253{0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e,
 254 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64,
 255 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e,
 256 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50,
 257 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e,
 258 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44,
 259 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e,
 260 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38,
 261 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e,
 262 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24,
 263 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e,
 264 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10,
 265 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e,
 266 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04,
 267 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e,
 268 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9,
 269 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1,
 270 0x78};
 271static const unsigned char chktabh[256] =
 272{0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9,
 273 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb,
 274 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb,
 275 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f,
 276 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed,
 277 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf,
 278 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef,
 279 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07,
 280 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1,
 281 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3,
 282 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3,
 283 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87,
 284 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5,
 285 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7,
 286 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7,
 287 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f,
 288 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e,
 289 0x0f};
 290
 291/*************************************************************************
 292* FPGA functions
 293************************************************************************/
 294
 295static void delay(int ms)
 296{
 297        unsigned long timeout = jiffies + ((ms * HZ) / 1000);
 298        while (time_before(jiffies, timeout))
 299                cpu_relax();
 300}
 301
 302/*
 303 * reset FPGA
 304 */
 305
 306static void fpga_reset(int iobase)
 307{
 308        outb(0, IER(iobase));
 309        outb(LCR_DLAB | LCR_BIT5, LCR(iobase));
 310        outb(1, DLL(iobase));
 311        outb(0, DLM(iobase));
 312
 313        outb(LCR_BIT5, LCR(iobase));
 314        inb(LSR(iobase));
 315        inb(MSR(iobase));
 316        /* turn off FPGA supply voltage */
 317        outb(MCR_OUT1 | MCR_OUT2, MCR(iobase));
 318        delay(100);
 319        /* turn on FPGA supply voltage again */
 320        outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase));
 321        delay(100);
 322}
 323
 324/*
 325 * send one byte to FPGA
 326 */
 327
 328static int fpga_write(int iobase, unsigned char wrd)
 329{
 330        unsigned char bit;
 331        int k;
 332        unsigned long timeout = jiffies + HZ / 10;
 333
 334        for (k = 0; k < 8; k++) {
 335                bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR;
 336                outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase));
 337                wrd <<= 1;
 338                outb(0xfc, THR(iobase));
 339                while ((inb(LSR(iobase)) & LSR_TSRE) == 0)
 340                        if (time_after(jiffies, timeout))
 341                                return -1;
 342        }
 343
 344        return 0;
 345}
 346
 347/*
 348 * predef should be 0 for loading user defined mcs
 349 * predef should be YAM_1200 for loading predef 1200 mcs
 350 * predef should be YAM_9600 for loading predef 9600 mcs
 351 */
 352static unsigned char *add_mcs(unsigned char *bits, int bitrate,
 353                              unsigned int predef)
 354{
 355        const char *fw_name[2] = {FIRMWARE_9600, FIRMWARE_1200};
 356        const struct firmware *fw;
 357        struct platform_device *pdev;
 358        struct yam_mcs *p;
 359        int err;
 360
 361        switch (predef) {
 362        case 0:
 363                fw = NULL;
 364                break;
 365        case YAM_1200:
 366        case YAM_9600:
 367                predef--;
 368                pdev = platform_device_register_simple("yam", 0, NULL, 0);
 369                if (IS_ERR(pdev)) {
 370                        printk(KERN_ERR "yam: Failed to register firmware\n");
 371                        return NULL;
 372                }
 373                err = request_firmware(&fw, fw_name[predef], &pdev->dev);
 374                platform_device_unregister(pdev);
 375                if (err) {
 376                        printk(KERN_ERR "Failed to load firmware \"%s\"\n",
 377                               fw_name[predef]);
 378                        return NULL;
 379                }
 380                if (fw->size != YAM_FPGA_SIZE) {
 381                        printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n",
 382                               fw->size, fw_name[predef]);
 383                        release_firmware(fw);
 384                        return NULL;
 385                }
 386                bits = (unsigned char *)fw->data;
 387                break;
 388        default:
 389                printk(KERN_ERR "yam: Invalid predef number %u\n", predef);
 390                return NULL;
 391        }
 392
 393        /* If it already exists, replace the bit data */
 394        p = yam_data;
 395        while (p) {
 396                if (p->bitrate == bitrate) {
 397                        memcpy(p->bits, bits, YAM_FPGA_SIZE);
 398                        goto out;
 399                }
 400                p = p->next;
 401        }
 402
 403        /* Allocate a new mcs */
 404        if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) {
 405                release_firmware(fw);
 406                return NULL;
 407        }
 408        memcpy(p->bits, bits, YAM_FPGA_SIZE);
 409        p->bitrate = bitrate;
 410        p->next = yam_data;
 411        yam_data = p;
 412 out:
 413        release_firmware(fw);
 414        return p->bits;
 415}
 416
 417static unsigned char *get_mcs(int bitrate)
 418{
 419        struct yam_mcs *p;
 420
 421        p = yam_data;
 422        while (p) {
 423                if (p->bitrate == bitrate)
 424                        return p->bits;
 425                p = p->next;
 426        }
 427
 428        /* Load predefined mcs data */
 429        switch (bitrate) {
 430        case 1200:
 431                /* setting predef as YAM_1200 for loading predef 1200 mcs */
 432                return add_mcs(NULL, bitrate, YAM_1200);
 433        default:
 434                /* setting predef as YAM_9600 for loading predef 9600 mcs */
 435                return add_mcs(NULL, bitrate, YAM_9600);
 436        }
 437}
 438
 439/*
 440 * download bitstream to FPGA
 441 * data is contained in bits[] array in yam1200.h resp. yam9600.h
 442 */
 443
 444static int fpga_download(int iobase, int bitrate)
 445{
 446        int i, rc;
 447        unsigned char *pbits;
 448
 449        pbits = get_mcs(bitrate);
 450        if (pbits == NULL)
 451                return -1;
 452
 453        fpga_reset(iobase);
 454        for (i = 0; i < YAM_FPGA_SIZE; i++) {
 455                if (fpga_write(iobase, pbits[i])) {
 456                        printk(KERN_ERR "yam: error in write cycle\n");
 457                        return -1;                      /* write... */
 458                }
 459        }
 460
 461        fpga_write(iobase, 0xFF);
 462        rc = inb(MSR(iobase));          /* check DONE signal */
 463
 464        /* Needed for some hardwares */
 465        delay(50);
 466
 467        return (rc & MSR_DSR) ? 0 : -1;
 468}
 469
 470
 471/************************************************************************
 472* Serial port init 
 473************************************************************************/
 474
 475static void yam_set_uart(struct net_device *dev)
 476{
 477        struct yam_port *yp = netdev_priv(dev);
 478        int divisor = 115200 / yp->baudrate;
 479
 480        outb(0, IER(dev->base_addr));
 481        outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr));
 482        outb(divisor, DLL(dev->base_addr));
 483        outb(0, DLM(dev->base_addr));
 484        outb(LCR_BIT8, LCR(dev->base_addr));
 485        outb(PTT_OFF, MCR(dev->base_addr));
 486        outb(0x00, FCR(dev->base_addr));
 487
 488        /* Flush pending irq */
 489
 490        inb(RBR(dev->base_addr));
 491        inb(MSR(dev->base_addr));
 492
 493        /* Enable rx irq */
 494
 495        outb(ENABLE_RTXINT, IER(dev->base_addr));
 496}
 497
 498
 499/* --------------------------------------------------------------------- */
 500
 501enum uart {
 502        c_uart_unknown, c_uart_8250,
 503        c_uart_16450, c_uart_16550, c_uart_16550A
 504};
 505
 506static const char *uart_str[] =
 507{"unknown", "8250", "16450", "16550", "16550A"};
 508
 509static enum uart yam_check_uart(unsigned int iobase)
 510{
 511        unsigned char b1, b2, b3;
 512        enum uart u;
 513        enum uart uart_tab[] =
 514        {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A};
 515
 516        b1 = inb(MCR(iobase));
 517        outb(b1 | 0x10, MCR(iobase));   /* loopback mode */
 518        b2 = inb(MSR(iobase));
 519        outb(0x1a, MCR(iobase));
 520        b3 = inb(MSR(iobase)) & 0xf0;
 521        outb(b1, MCR(iobase));          /* restore old values */
 522        outb(b2, MSR(iobase));
 523        if (b3 != 0x90)
 524                return c_uart_unknown;
 525        inb(RBR(iobase));
 526        inb(RBR(iobase));
 527        outb(0x01, FCR(iobase));        /* enable FIFOs */
 528        u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
 529        if (u == c_uart_16450) {
 530                outb(0x5a, SCR(iobase));
 531                b1 = inb(SCR(iobase));
 532                outb(0xa5, SCR(iobase));
 533                b2 = inb(SCR(iobase));
 534                if ((b1 != 0x5a) || (b2 != 0xa5))
 535                        u = c_uart_8250;
 536        }
 537        return u;
 538}
 539
 540/******************************************************************************
 541* Rx Section
 542******************************************************************************/
 543static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp)
 544{
 545        if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) {
 546                int pkt_len = yp->rx_len - 2 + 1;       /* -CRC + kiss */
 547                struct sk_buff *skb;
 548
 549                if ((yp->rx_crch & yp->rx_crcl) != 0xFF) {
 550                        /* Bad crc */
 551                } else {
 552                        if (!(skb = dev_alloc_skb(pkt_len))) {
 553                                printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
 554                                ++dev->stats.rx_dropped;
 555                        } else {
 556                                unsigned char *cp;
 557                                cp = skb_put(skb, pkt_len);
 558                                *cp++ = 0;              /* KISS kludge */
 559                                memcpy(cp, yp->rx_buf, pkt_len - 1);
 560                                skb->protocol = ax25_type_trans(skb, dev);
 561                                netif_rx(skb);
 562                                ++dev->stats.rx_packets;
 563                        }
 564                }
 565        }
 566        yp->rx_len = 0;
 567        yp->rx_crcl = 0x21;
 568        yp->rx_crch = 0xf3;
 569}
 570
 571static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb)
 572{
 573        if (yp->rx_len < YAM_MAX_FRAME) {
 574                unsigned char c = yp->rx_crcl;
 575                yp->rx_crcl = (chktabl[c] ^ yp->rx_crch);
 576                yp->rx_crch = (chktabh[c] ^ rxb);
 577                yp->rx_buf[yp->rx_len++] = rxb;
 578        }
 579}
 580
 581/********************************************************************************
 582* TX Section
 583********************************************************************************/
 584
 585static void ptt_on(struct net_device *dev)
 586{
 587        outb(PTT_ON, MCR(dev->base_addr));
 588}
 589
 590static void ptt_off(struct net_device *dev)
 591{
 592        outb(PTT_OFF, MCR(dev->base_addr));
 593}
 594
 595static netdev_tx_t yam_send_packet(struct sk_buff *skb,
 596                                         struct net_device *dev)
 597{
 598        struct yam_port *yp = netdev_priv(dev);
 599
 600        if (skb->protocol == htons(ETH_P_IP))
 601                return ax25_ip_xmit(skb);
 602
 603        skb_queue_tail(&yp->send_queue, skb);
 604        netif_trans_update(dev);
 605        return NETDEV_TX_OK;
 606}
 607
 608static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
 609{
 610        if ((yp->tx_state == TX_TAIL) || (yp->txd == 0))
 611                yp->tx_count = 1;
 612        else
 613                yp->tx_count = (yp->bitrate * yp->txd) / 8000;
 614        yp->tx_state = TX_HEAD;
 615        ptt_on(dev);
 616}
 617
 618static void yam_arbitrate(struct net_device *dev)
 619{
 620        struct yam_port *yp = netdev_priv(dev);
 621
 622        if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF ||
 623            skb_queue_empty(&yp->send_queue))
 624                return;
 625        /* tx_state is TX_OFF and there is data to send */
 626
 627        if (yp->dupmode) {
 628                /* Full duplex mode, don't wait */
 629                yam_start_tx(dev, yp);
 630                return;
 631        }
 632        if (yp->dcd) {
 633                /* DCD on, wait slotime ... */
 634                yp->slotcnt = yp->slot / 10;
 635                return;
 636        }
 637        /* Is slottime passed ? */
 638        if ((--yp->slotcnt) > 0)
 639                return;
 640
 641        yp->slotcnt = yp->slot / 10;
 642
 643        /* is random > persist ? */
 644        if ((prandom_u32() % 256) > yp->pers)
 645                return;
 646
 647        yam_start_tx(dev, yp);
 648}
 649
 650static void yam_dotimer(struct timer_list *unused)
 651{
 652        int i;
 653
 654        for (i = 0; i < NR_PORTS; i++) {
 655                struct net_device *dev = yam_devs[i];
 656                if (dev && netif_running(dev))
 657                        yam_arbitrate(dev);
 658        }
 659        yam_timer.expires = jiffies + HZ / 100;
 660        add_timer(&yam_timer);
 661}
 662
 663static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
 664{
 665        struct sk_buff *skb;
 666        unsigned char b, temp;
 667
 668        switch (yp->tx_state) {
 669        case TX_OFF:
 670                break;
 671        case TX_HEAD:
 672                if (--yp->tx_count <= 0) {
 673                        if (!(skb = skb_dequeue(&yp->send_queue))) {
 674                                ptt_off(dev);
 675                                yp->tx_state = TX_OFF;
 676                                break;
 677                        }
 678                        yp->tx_state = TX_DATA;
 679                        if (skb->data[0] != 0) {
 680/*                              do_kiss_params(s, skb->data, skb->len); */
 681                                dev_kfree_skb_any(skb);
 682                                break;
 683                        }
 684                        yp->tx_len = skb->len - 1;      /* strip KISS byte */
 685                        if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
 686                                dev_kfree_skb_any(skb);
 687                                break;
 688                        }
 689                        skb_copy_from_linear_data_offset(skb, 1,
 690                                                         yp->tx_buf,
 691                                                         yp->tx_len);
 692                        dev_kfree_skb_any(skb);
 693                        yp->tx_count = 0;
 694                        yp->tx_crcl = 0x21;
 695                        yp->tx_crch = 0xf3;
 696                        yp->tx_state = TX_DATA;
 697                }
 698                break;
 699        case TX_DATA:
 700                b = yp->tx_buf[yp->tx_count++];
 701                outb(b, THR(dev->base_addr));
 702                temp = yp->tx_crcl;
 703                yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
 704                yp->tx_crch = chktabh[temp] ^ b;
 705                if (yp->tx_count >= yp->tx_len) {
 706                        yp->tx_state = TX_CRC1;
 707                }
 708                break;
 709        case TX_CRC1:
 710                yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
 711                yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
 712                outb(yp->tx_crcl, THR(dev->base_addr));
 713                yp->tx_state = TX_CRC2;
 714                break;
 715        case TX_CRC2:
 716                outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
 717                if (skb_queue_empty(&yp->send_queue)) {
 718                        yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
 719                        if (yp->dupmode == 2)
 720                                yp->tx_count += (yp->bitrate * yp->holdd) / 8;
 721                        if (yp->tx_count == 0)
 722                                yp->tx_count = 1;
 723                        yp->tx_state = TX_TAIL;
 724                } else {
 725                        yp->tx_count = 1;
 726                        yp->tx_state = TX_HEAD;
 727                }
 728                ++dev->stats.tx_packets;
 729                break;
 730        case TX_TAIL:
 731                if (--yp->tx_count <= 0) {
 732                        yp->tx_state = TX_OFF;
 733                        ptt_off(dev);
 734                }
 735                break;
 736        }
 737}
 738
 739/***********************************************************************************
 740* ISR routine
 741************************************************************************************/
 742
 743static irqreturn_t yam_interrupt(int irq, void *dev_id)
 744{
 745        struct net_device *dev;
 746        struct yam_port *yp;
 747        unsigned char iir;
 748        int counter = 100;
 749        int i;
 750        int handled = 0;
 751
 752        for (i = 0; i < NR_PORTS; i++) {
 753                dev = yam_devs[i];
 754                yp = netdev_priv(dev);
 755
 756                if (!netif_running(dev))
 757                        continue;
 758
 759                while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) {
 760                        unsigned char msr = inb(MSR(dev->base_addr));
 761                        unsigned char lsr = inb(LSR(dev->base_addr));
 762                        unsigned char rxb;
 763
 764                        handled = 1;
 765
 766                        if (lsr & LSR_OE)
 767                                ++dev->stats.rx_fifo_errors;
 768
 769                        yp->dcd = (msr & RX_DCD) ? 1 : 0;
 770
 771                        if (--counter <= 0) {
 772                                printk(KERN_ERR "%s: too many irq iir=%d\n",
 773                                                dev->name, iir);
 774                                goto out;
 775                        }
 776                        if (msr & TX_RDY) {
 777                                ++yp->nb_mdint;
 778                                yam_tx_byte(dev, yp);
 779                        }
 780                        if (lsr & LSR_RXC) {
 781                                ++yp->nb_rxint;
 782                                rxb = inb(RBR(dev->base_addr));
 783                                if (msr & RX_FLAG)
 784                                        yam_rx_flag(dev, yp);
 785                                else
 786                                        yam_rx_byte(dev, yp, rxb);
 787                        }
 788                }
 789        }
 790out:
 791        return IRQ_RETVAL(handled);
 792}
 793
 794#ifdef CONFIG_PROC_FS
 795
 796static void *yam_seq_start(struct seq_file *seq, loff_t *pos)
 797{
 798        return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
 799}
 800
 801static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 802{
 803        ++*pos;
 804        return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
 805}
 806
 807static void yam_seq_stop(struct seq_file *seq, void *v)
 808{
 809}
 810
 811static int yam_seq_show(struct seq_file *seq, void *v)
 812{
 813        struct net_device *dev = v;
 814        const struct yam_port *yp = netdev_priv(dev);
 815
 816        seq_printf(seq, "Device %s\n", dev->name);
 817        seq_printf(seq, "  Up       %d\n", netif_running(dev));
 818        seq_printf(seq, "  Speed    %u\n", yp->bitrate);
 819        seq_printf(seq, "  IoBase   0x%x\n", yp->iobase);
 820        seq_printf(seq, "  BaudRate %u\n", yp->baudrate);
 821        seq_printf(seq, "  IRQ      %u\n", yp->irq);
 822        seq_printf(seq, "  TxState  %u\n", yp->tx_state);
 823        seq_printf(seq, "  Duplex   %u\n", yp->dupmode);
 824        seq_printf(seq, "  HoldDly  %u\n", yp->holdd);
 825        seq_printf(seq, "  TxDelay  %u\n", yp->txd);
 826        seq_printf(seq, "  TxTail   %u\n", yp->txtail);
 827        seq_printf(seq, "  SlotTime %u\n", yp->slot);
 828        seq_printf(seq, "  Persist  %u\n", yp->pers);
 829        seq_printf(seq, "  TxFrames %lu\n", dev->stats.tx_packets);
 830        seq_printf(seq, "  RxFrames %lu\n", dev->stats.rx_packets);
 831        seq_printf(seq, "  TxInt    %u\n", yp->nb_mdint);
 832        seq_printf(seq, "  RxInt    %u\n", yp->nb_rxint);
 833        seq_printf(seq, "  RxOver   %lu\n", dev->stats.rx_fifo_errors);
 834        seq_printf(seq, "\n");
 835        return 0;
 836}
 837
 838static const struct seq_operations yam_seqops = {
 839        .start = yam_seq_start,
 840        .next = yam_seq_next,
 841        .stop = yam_seq_stop,
 842        .show = yam_seq_show,
 843};
 844
 845static int yam_info_open(struct inode *inode, struct file *file)
 846{
 847        return seq_open(file, &yam_seqops);
 848}
 849
 850static const struct file_operations yam_info_fops = {
 851        .owner = THIS_MODULE,
 852        .open = yam_info_open,
 853        .read = seq_read,
 854        .llseek = seq_lseek,
 855        .release = seq_release,
 856};
 857
 858#endif
 859
 860
 861/* --------------------------------------------------------------------- */
 862
 863static int yam_open(struct net_device *dev)
 864{
 865        struct yam_port *yp = netdev_priv(dev);
 866        enum uart u;
 867        int i;
 868        int ret=0;
 869
 870        printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq);
 871
 872        if (!yp->bitrate)
 873                return -ENXIO;
 874        if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT ||
 875                dev->irq < 2 || dev->irq > 15) {
 876                return -ENXIO;
 877        }
 878        if (!request_region(dev->base_addr, YAM_EXTENT, dev->name))
 879        {
 880                printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr);
 881                return -EACCES;
 882        }
 883        if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) {
 884                printk(KERN_ERR "%s: cannot find uart type\n", dev->name);
 885                ret = -EIO;
 886                goto out_release_base;
 887        }
 888        if (fpga_download(dev->base_addr, yp->bitrate)) {
 889                printk(KERN_ERR "%s: cannot init FPGA\n", dev->name);
 890                ret = -EIO;
 891                goto out_release_base;
 892        }
 893        outb(0, IER(dev->base_addr));
 894        if (request_irq(dev->irq, yam_interrupt, IRQF_SHARED, dev->name, dev)) {
 895                printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
 896                ret = -EBUSY;
 897                goto out_release_base;
 898        }
 899
 900        yam_set_uart(dev);
 901
 902        netif_start_queue(dev);
 903        
 904        yp->slotcnt = yp->slot / 10;
 905
 906        /* Reset overruns for all ports - FPGA programming makes overruns */
 907        for (i = 0; i < NR_PORTS; i++) {
 908                struct net_device *yam_dev = yam_devs[i];
 909
 910                inb(LSR(yam_dev->base_addr));
 911                yam_dev->stats.rx_fifo_errors = 0;
 912        }
 913
 914        printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
 915                   uart_str[u]);
 916        return 0;
 917
 918out_release_base:
 919        release_region(dev->base_addr, YAM_EXTENT);
 920        return ret;
 921}
 922
 923/* --------------------------------------------------------------------- */
 924
 925static int yam_close(struct net_device *dev)
 926{
 927        struct sk_buff *skb;
 928        struct yam_port *yp = netdev_priv(dev);
 929
 930        if (!dev)
 931                return -EINVAL;
 932
 933        /*
 934         * disable interrupts
 935         */
 936        outb(0, IER(dev->base_addr));
 937        outb(1, MCR(dev->base_addr));
 938        /* Remove IRQ handler if last */
 939        free_irq(dev->irq,dev);
 940        release_region(dev->base_addr, YAM_EXTENT);
 941        netif_stop_queue(dev);
 942        while ((skb = skb_dequeue(&yp->send_queue)))
 943                dev_kfree_skb(skb);
 944
 945        printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n",
 946                   yam_drvname, dev->base_addr, dev->irq);
 947        return 0;
 948}
 949
 950/* --------------------------------------------------------------------- */
 951
 952static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 953{
 954        struct yam_port *yp = netdev_priv(dev);
 955        struct yamdrv_ioctl_cfg yi;
 956        struct yamdrv_ioctl_mcs *ym;
 957        int ioctl_cmd;
 958
 959        if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int)))
 960                 return -EFAULT;
 961
 962        if (yp->magic != YAM_MAGIC)
 963                return -EINVAL;
 964
 965        if (!capable(CAP_NET_ADMIN))
 966                return -EPERM;
 967
 968        if (cmd != SIOCDEVPRIVATE)
 969                return -EINVAL;
 970
 971        switch (ioctl_cmd) {
 972
 973        case SIOCYAMRESERVED:
 974                return -EINVAL;                 /* unused */
 975
 976        case SIOCYAMSMCS:
 977                if (netif_running(dev))
 978                        return -EINVAL;         /* Cannot change this parameter when up */
 979                ym = memdup_user(ifr->ifr_data,
 980                                 sizeof(struct yamdrv_ioctl_mcs));
 981                if (IS_ERR(ym))
 982                        return PTR_ERR(ym);
 983                if (ym->bitrate > YAM_MAXBITRATE) {
 984                        kfree(ym);
 985                        return -EINVAL;
 986                }
 987                /* setting predef as 0 for loading userdefined mcs data */
 988                add_mcs(ym->bits, ym->bitrate, 0);
 989                kfree(ym);
 990                break;
 991
 992        case SIOCYAMSCFG:
 993                if (!capable(CAP_SYS_RAWIO))
 994                        return -EPERM;
 995                if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg)))
 996                         return -EFAULT;
 997
 998                if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev))
 999                        return -EINVAL;         /* Cannot change this parameter when up */
1000                if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev))
1001                        return -EINVAL;         /* Cannot change this parameter when up */
1002                if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev))
1003                        return -EINVAL;         /* Cannot change this parameter when up */
1004                if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev))
1005                        return -EINVAL;         /* Cannot change this parameter when up */
1006
1007                if (yi.cfg.mask & YAM_IOBASE) {
1008                        yp->iobase = yi.cfg.iobase;
1009                        dev->base_addr = yi.cfg.iobase;
1010                }
1011                if (yi.cfg.mask & YAM_IRQ) {
1012                        if (yi.cfg.irq > 15)
1013                                return -EINVAL;
1014                        yp->irq = yi.cfg.irq;
1015                        dev->irq = yi.cfg.irq;
1016                }
1017                if (yi.cfg.mask & YAM_BITRATE) {
1018                        if (yi.cfg.bitrate > YAM_MAXBITRATE)
1019                                return -EINVAL;
1020                        yp->bitrate = yi.cfg.bitrate;
1021                }
1022                if (yi.cfg.mask & YAM_BAUDRATE) {
1023                        if (yi.cfg.baudrate > YAM_MAXBAUDRATE)
1024                                return -EINVAL;
1025                        yp->baudrate = yi.cfg.baudrate;
1026                }
1027                if (yi.cfg.mask & YAM_MODE) {
1028                        if (yi.cfg.mode > YAM_MAXMODE)
1029                                return -EINVAL;
1030                        yp->dupmode = yi.cfg.mode;
1031                }
1032                if (yi.cfg.mask & YAM_HOLDDLY) {
1033                        if (yi.cfg.holddly > YAM_MAXHOLDDLY)
1034                                return -EINVAL;
1035                        yp->holdd = yi.cfg.holddly;
1036                }
1037                if (yi.cfg.mask & YAM_TXDELAY) {
1038                        if (yi.cfg.txdelay > YAM_MAXTXDELAY)
1039                                return -EINVAL;
1040                        yp->txd = yi.cfg.txdelay;
1041                }
1042                if (yi.cfg.mask & YAM_TXTAIL) {
1043                        if (yi.cfg.txtail > YAM_MAXTXTAIL)
1044                                return -EINVAL;
1045                        yp->txtail = yi.cfg.txtail;
1046                }
1047                if (yi.cfg.mask & YAM_PERSIST) {
1048                        if (yi.cfg.persist > YAM_MAXPERSIST)
1049                                return -EINVAL;
1050                        yp->pers = yi.cfg.persist;
1051                }
1052                if (yi.cfg.mask & YAM_SLOTTIME) {
1053                        if (yi.cfg.slottime > YAM_MAXSLOTTIME)
1054                                return -EINVAL;
1055                        yp->slot = yi.cfg.slottime;
1056                        yp->slotcnt = yp->slot / 10;
1057                }
1058                break;
1059
1060        case SIOCYAMGCFG:
1061                memset(&yi, 0, sizeof(yi));
1062                yi.cfg.mask = 0xffffffff;
1063                yi.cfg.iobase = yp->iobase;
1064                yi.cfg.irq = yp->irq;
1065                yi.cfg.bitrate = yp->bitrate;
1066                yi.cfg.baudrate = yp->baudrate;
1067                yi.cfg.mode = yp->dupmode;
1068                yi.cfg.txdelay = yp->txd;
1069                yi.cfg.holddly = yp->holdd;
1070                yi.cfg.txtail = yp->txtail;
1071                yi.cfg.persist = yp->pers;
1072                yi.cfg.slottime = yp->slot;
1073                if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg)))
1074                         return -EFAULT;
1075                break;
1076
1077        default:
1078                return -EINVAL;
1079
1080        }
1081
1082        return 0;
1083}
1084
1085/* --------------------------------------------------------------------- */
1086
1087static int yam_set_mac_address(struct net_device *dev, void *addr)
1088{
1089        struct sockaddr *sa = (struct sockaddr *) addr;
1090
1091        /* addr is an AX.25 shifted ASCII mac address */
1092        memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
1093        return 0;
1094}
1095
1096/* --------------------------------------------------------------------- */
1097
1098static const struct net_device_ops yam_netdev_ops = {
1099        .ndo_open            = yam_open,
1100        .ndo_stop            = yam_close,
1101        .ndo_start_xmit      = yam_send_packet,
1102        .ndo_do_ioctl        = yam_ioctl,
1103        .ndo_set_mac_address = yam_set_mac_address,
1104};
1105
1106static void yam_setup(struct net_device *dev)
1107{
1108        struct yam_port *yp = netdev_priv(dev);
1109
1110        yp->magic = YAM_MAGIC;
1111        yp->bitrate = DEFAULT_BITRATE;
1112        yp->baudrate = DEFAULT_BITRATE * 2;
1113        yp->iobase = 0;
1114        yp->irq = 0;
1115        yp->dupmode = 0;
1116        yp->holdd = DEFAULT_HOLDD;
1117        yp->txd = DEFAULT_TXD;
1118        yp->txtail = DEFAULT_TXTAIL;
1119        yp->slot = DEFAULT_SLOT;
1120        yp->pers = DEFAULT_PERS;
1121        yp->dev = dev;
1122
1123        dev->base_addr = yp->iobase;
1124        dev->irq = yp->irq;
1125
1126        skb_queue_head_init(&yp->send_queue);
1127
1128        dev->netdev_ops = &yam_netdev_ops;
1129        dev->header_ops = &ax25_header_ops;
1130
1131        dev->type = ARPHRD_AX25;
1132        dev->hard_header_len = AX25_MAX_HEADER_LEN;
1133        dev->mtu = AX25_MTU;
1134        dev->addr_len = AX25_ADDR_LEN;
1135        memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1136        memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
1137}
1138
1139static int __init yam_init_driver(void)
1140{
1141        struct net_device *dev;
1142        int i, err;
1143        char name[IFNAMSIZ];
1144
1145        printk(yam_drvinfo);
1146
1147        for (i = 0; i < NR_PORTS; i++) {
1148                sprintf(name, "yam%d", i);
1149                
1150                dev = alloc_netdev(sizeof(struct yam_port), name,
1151                                   NET_NAME_UNKNOWN, yam_setup);
1152                if (!dev) {
1153                        pr_err("yam: cannot allocate net device\n");
1154                        err = -ENOMEM;
1155                        goto error;
1156                }
1157                
1158                err = register_netdev(dev);
1159                if (err) {
1160                        printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name);
1161                        goto error;
1162                }
1163                yam_devs[i] = dev;
1164
1165        }
1166
1167        timer_setup(&yam_timer, yam_dotimer, 0);
1168        yam_timer.expires = jiffies + HZ / 100;
1169        add_timer(&yam_timer);
1170
1171        proc_create("yam", 0444, init_net.proc_net, &yam_info_fops);
1172        return 0;
1173 error:
1174        while (--i >= 0) {
1175                unregister_netdev(yam_devs[i]);
1176                free_netdev(yam_devs[i]);
1177        }
1178        return err;
1179}
1180
1181/* --------------------------------------------------------------------- */
1182
1183static void __exit yam_cleanup_driver(void)
1184{
1185        struct yam_mcs *p;
1186        int i;
1187
1188        del_timer_sync(&yam_timer);
1189        for (i = 0; i < NR_PORTS; i++) {
1190                struct net_device *dev = yam_devs[i];
1191                if (dev) {
1192                        unregister_netdev(dev);
1193                        free_netdev(dev);
1194                }
1195        }
1196
1197        while (yam_data) {
1198                p = yam_data;
1199                yam_data = yam_data->next;
1200                kfree(p);
1201        }
1202
1203        remove_proc_entry("yam", init_net.proc_net);
1204}
1205
1206/* --------------------------------------------------------------------- */
1207
1208MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr");
1209MODULE_DESCRIPTION("Yam amateur radio modem driver");
1210MODULE_LICENSE("GPL");
1211MODULE_FIRMWARE(FIRMWARE_1200);
1212MODULE_FIRMWARE(FIRMWARE_9600);
1213
1214module_init(yam_init_driver);
1215module_exit(yam_cleanup_driver);
1216
1217/* --------------------------------------------------------------------- */
1218
1219