/* MDIO Bus interface
 *
 * Author: Andy Fleming
 *
 * Copyright (c) 2004 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
#include <linux/of_gpio.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/gpio/consumer.h>

#include <asm/irq.h>

#define CREATE_TRACE_POINTS
#include <trace/events/mdio.h>

#include "mdio-boardinfo.h"

static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
{
        struct gpio_desc *gpiod = NULL;

        /* Deassert the optional reset signal */
        if (mdiodev->dev.of_node)
                gpiod = fwnode_get_named_gpiod(&mdiodev->dev.of_node->fwnode,
                                               "reset-gpios", 0, GPIOD_OUT_LOW,
                                               "PHY reset");
        if (PTR_ERR(gpiod) == -ENOENT ||
            PTR_ERR(gpiod) == -ENOSYS)
                gpiod = NULL;
        else if (IS_ERR(gpiod))
                return PTR_ERR(gpiod);

        mdiodev->reset = gpiod;

        /* Assert the reset signal again */
        mdio_device_reset(mdiodev, 1);

        return 0;
}

int mdiobus_register_device(struct mdio_device *mdiodev)
{
        int err;

        if (mdiodev->bus->mdio_map[mdiodev->addr])
                return -EBUSY;

        if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) {
                err = mdiobus_register_gpiod(mdiodev);
                if (err)
                        return err;
        }

        mdiodev->bus->mdio_map[mdiodev->addr] = mdiodev;

        return 0;
}
EXPORT_SYMBOL(mdiobus_register_device);

int mdiobus_unregister_device(struct mdio_device *mdiodev)
{
        if (mdiodev->bus->mdio_map[mdiodev->addr] != mdiodev)
                return -EINVAL;

        mdiodev->bus->mdio_map[mdiodev->addr] = NULL;

        return 0;
}
EXPORT_SYMBOL(mdiobus_unregister_device);

struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr)
{
        struct mdio_device *mdiodev = bus->mdio_map[addr];

        if (!mdiodev)
                return NULL;

        if (!(mdiodev->flags & MDIO_DEVICE_FLAG_PHY))
                return NULL;

        return container_of(mdiodev, struct phy_device, mdio);
}
EXPORT_SYMBOL(mdiobus_get_phy);

bool mdiobus_is_registered_device(struct mii_bus *bus, int addr)
{
        return bus->mdio_map[addr];
}
EXPORT_SYMBOL(mdiobus_is_registered_device);

/**
 * mdiobus_alloc_size - allocate a mii_bus structure
 * @size: extra amount of memory to allocate for private storage.
 * If non-zero, then bus->priv is points to that memory.
 *
 * Description: called by a bus driver to allocate an mii_bus
 * structure to fill in.
 */
struct mii_bus *mdiobus_alloc_size(size_t size)
{
        struct mii_bus *bus;
        size_t aligned_size = ALIGN(sizeof(*bus), NETDEV_ALIGN);
        size_t alloc_size;
        int i;

        /* If we alloc extra space, it should be aligned */
        if (size)
                alloc_size = aligned_size + size;
        else
                alloc_size = sizeof(*bus);

        bus = kzalloc(alloc_size, GFP_KERNEL);
        if (!bus)
                return NULL;

        bus->state = MDIOBUS_ALLOCATED;
        if (size)
                bus->priv = (void *)bus + aligned_size;

        /* Initialise the interrupts to polling */
        for (i = 0; i < PHY_MAX_ADDR; i++)
                bus->irq[i] = PHY_POLL;

        return bus;
}
EXPORT_SYMBOL(mdiobus_alloc_size);

static void _devm_mdiobus_free(struct device *dev, void *res)
{
        mdiobus_free(*(struct mii_bus **)res);
}

static int devm_mdiobus_match(struct device *dev, void *res, void *data)
{
        struct mii_bus **r = res;

        if (WARN_ON(!r || !*r))
                return 0;

        return *r == data;
}

/**
 * devm_mdiobus_alloc_size - Resource-managed mdiobus_alloc_size()
 * @dev:                Device to allocate mii_bus for
 * @sizeof_priv:        Space to allocate for private structure.
 *
 * Managed mdiobus_alloc_size. mii_bus allocated with this function is
 * automatically freed on driver detach.
 *
 * If an mii_bus allocated with this function needs to be freed separately,
 * devm_mdiobus_free() must be used.
 *
 * RETURNS:
 * Pointer to allocated mii_bus on success, NULL on failure.
 */
struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv)
{
        struct mii_bus **ptr, *bus;

        ptr = devres_alloc(_devm_mdiobus_free, sizeof(*ptr), GFP_KERNEL);
        if (!ptr)
                return NULL;

        /* use raw alloc_dr for kmalloc caller tracing */
        bus = mdiobus_alloc_size(sizeof_priv);
        if (bus) {
                *ptr = bus;
                devres_add(dev, ptr);
        } else {
                devres_free(ptr);
        }

        return bus;
}
EXPORT_SYMBOL_GPL(devm_mdiobus_alloc_size);

/**
 * devm_mdiobus_free - Resource-managed mdiobus_free()
 * @dev:                Device this mii_bus belongs to
 * @bus:                the mii_bus associated with the device
 *
 * Free mii_bus allocated with devm_mdiobus_alloc_size().
 */
void devm_mdiobus_free(struct device *dev, struct mii_bus *bus)
{
        int rc;

        rc = devres_release(dev, _devm_mdiobus_free,
                            devm_mdiobus_match, bus);
        WARN_ON(rc);
}
EXPORT_SYMBOL_GPL(devm_mdiobus_free);

/**
 * mdiobus_release - mii_bus device release callback
 * @d: the target struct device that contains the mii_bus
 *
 * Description: called when the last reference to an mii_bus is
 * dropped, to free the underlying memory.
 */
static void mdiobus_release(struct device *d)
{
        struct mii_bus *bus = to_mii_bus(d);
        BUG_ON(bus->state != MDIOBUS_RELEASED &&
               /* for compatibility with error handling in drivers */
               bus->state != MDIOBUS_ALLOCATED);
        kfree(bus);
}

static struct class mdio_bus_class = {
        .name           = "mdio_bus",
        .dev_release    = mdiobus_release,
};

#if IS_ENABLED(CONFIG_OF_MDIO)
/* Helper function for of_mdio_find_bus */
static int of_mdio_bus_match(struct device *dev, const void *mdio_bus_np)
{
        return dev->of_node == mdio_bus_np;
}
/**
 * of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
 * @mdio_bus_np: Pointer to the mii_bus.
 *
 * Returns a reference to the mii_bus, or NULL if none found.  The
 * embedded struct device will have its reference count incremented,
 * and this must be put once the bus is finished with.
 *
 * Because the association of a device_node and mii_bus is made via
 * of_mdiobus_register(), the mii_bus cannot be found before it is
 * registered with of_mdiobus_register().
 *
 */
struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np)
{
        struct device *d;

        if (!mdio_bus_np)
                return NULL;

        d = class_find_device(&mdio_bus_class, NULL,  mdio_bus_np,
                              of_mdio_bus_match);

        return d ? to_mii_bus(d) : NULL;
}
EXPORT_SYMBOL(of_mdio_find_bus);

/* Walk the list of subnodes of a mdio bus and look for a node that
 * matches the mdio device's address with its 'reg' property. If
 * found, set the of_node pointer for the mdio device. This allows
 * auto-probed phy devices to be supplied with information passed in
 * via DT.
 */
static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
                                    struct mdio_device *mdiodev)
{
        struct device *dev = &mdiodev->dev;
        struct device_node *child;

        if (dev->of_node || !bus->dev.of_node)
                return;

        for_each_available_child_of_node(bus->dev.of_node, child) {
                int addr;

                addr = of_mdio_parse_addr(dev, child);
                if (addr < 0)
                        continue;

                if (addr == mdiodev->addr) {
                        dev->of_node = child;
                        dev->fwnode = of_fwnode_handle(child);
                        return;
                }
        }
}
#else /* !IS_ENABLED(CONFIG_OF_MDIO) */
static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
                                           struct mdio_device *mdiodev)
{
}
#endif

/**
 * mdiobus_create_device_from_board_info - create a full MDIO device given
 * a mdio_board_info structure
 * @bus: MDIO bus to create the devices on
 * @bi: mdio_board_info structure describing the devices
 *
 * Returns 0 on success or < 0 on error.
 */
static int mdiobus_create_device(struct mii_bus *bus,
                                 struct mdio_board_info *bi)
{
        struct mdio_device *mdiodev;
        int ret = 0;

        mdiodev = mdio_device_create(bus, bi->mdio_addr);
        if (IS_ERR(mdiodev))
                return -ENODEV;

        strncpy(mdiodev->modalias, bi->modalias,
                sizeof(mdiodev->modalias));
        mdiodev->bus_match = mdio_device_bus_match;
        mdiodev->dev.platform_data = (void *)bi->platform_data;

        ret = mdio_device_register(mdiodev);
        if (ret)
                mdio_device_free(mdiodev);

        return ret;
}

/**
 * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
 * @bus: target mii_bus
 * @owner: module containing bus accessor functions
 *
 * Description: Called by a bus driver to bring up all the PHYs
 *   on a given bus, and attach them to the bus. Drivers should use
 *   mdiobus_register() rather than __mdiobus_register() unless they
 *   need to pass a specific owner module. MDIO devices which are not
 *   PHYs will not be brought up by this function. They are expected to
 *   to be explicitly listed in DT and instantiated by of_mdiobus_register().
 *
 * Returns 0 on success or < 0 on error.
 */
int __mdiobus_register(struct mii_bus *bus, struct module *owner)
{
        struct mdio_device *mdiodev;
        int i, err;
        struct gpio_desc *gpiod;

        if (NULL == bus || NULL == bus->name ||
            NULL == bus->read || NULL == bus->write)
                return -EINVAL;

        BUG_ON(bus->state != MDIOBUS_ALLOCATED &&
               bus->state != MDIOBUS_UNREGISTERED);

        bus->owner = owner;
        bus->dev.parent = bus->parent;
        bus->dev.class = &mdio_bus_class;
        bus->dev.groups = NULL;
        dev_set_name(&bus->dev, "%s", bus->id);

        err = device_register(&bus->dev);
        if (err) {
                pr_err("mii_bus %s failed to register\n", bus->id);
                put_device(&bus->dev);
                return -EINVAL;
        }

        mutex_init(&bus->mdio_lock);

        /* de-assert bus level PHY GPIO reset */
        gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW);
        if (IS_ERR(gpiod)) {
                dev_err(&bus->dev, "mii_bus %s couldn't get reset GPIO\n",
                        bus->id);
                return PTR_ERR(gpiod);
        } else  if (gpiod) {
                bus->reset_gpiod = gpiod;

                gpiod_set_value_cansleep(gpiod, 1);
                udelay(bus->reset_delay_us);
                gpiod_set_value_cansleep(gpiod, 0);
        }

        if (bus->reset)
                bus->reset(bus);

        for (i = 0; i < PHY_MAX_ADDR; i++) {
                if ((bus->phy_mask & (1 << i)) == 0) {
                        struct phy_device *phydev;

                        phydev = mdiobus_scan(bus, i);
                        if (IS_ERR(phydev) && (PTR_ERR(phydev) != -ENODEV)) {
                                err = PTR_ERR(phydev);
                                goto error;
                        }
                }
        }

        mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device);

        bus->state = MDIOBUS_REGISTERED;
        pr_info("%s: probed\n", bus->name);
        return 0;

error:
        while (--i >= 0) {
                mdiodev = bus->mdio_map[i];
                if (!mdiodev)
                        continue;

                mdiodev->device_remove(mdiodev);
                mdiodev->device_free(mdiodev);
        }

        /* Put PHYs in RESET to save power */
        if (bus->reset_gpiod)
                gpiod_set_value_cansleep(bus->reset_gpiod, 1);

        device_del(&bus->dev);
        return err;
}
EXPORT_SYMBOL(__mdiobus_register);

void mdiobus_unregister(struct mii_bus *bus)
{
        struct mdio_device *mdiodev;
        int i;

        BUG_ON(bus->state != MDIOBUS_REGISTERED);
        bus->state = MDIOBUS_UNREGISTERED;

        for (i = 0; i < PHY_MAX_ADDR; i++) {
                mdiodev = bus->mdio_map[i];
                if (!mdiodev)
                        continue;

                if (mdiodev->reset)
                        gpiod_put(mdiodev->reset);

                mdiodev->device_remove(mdiodev);
                mdiodev->device_free(mdiodev);
        }

        /* Put PHYs in RESET to save power */
        if (bus->reset_gpiod)
                gpiod_set_value_cansleep(bus->reset_gpiod, 1);

        device_del(&bus->dev);
}
EXPORT_SYMBOL(mdiobus_unregister);

/**
 * mdiobus_free - free a struct mii_bus
 * @bus: mii_bus to free
 *
 * This function releases the reference to the underlying device
 * object in the mii_bus.  If this is the last reference, the mii_bus
 * will be freed.
 */
void mdiobus_free(struct mii_bus *bus)
{
        /* For compatibility with error handling in drivers. */
        if (bus->state == MDIOBUS_ALLOCATED) {
                kfree(bus);
                return;
        }

        BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
        bus->state = MDIOBUS_RELEASED;

        put_device(&bus->dev);
}
EXPORT_SYMBOL(mdiobus_free);

/**
 * mdiobus_scan - scan a bus for MDIO devices.
 * @bus: mii_bus to scan
 * @addr: address on bus to scan
 *
 * This function scans the MDIO bus, looking for devices which can be
 * identified using a vendor/product ID in registers 2 and 3. Not all
 * MDIO devices have such registers, but PHY devices typically
 * do. Hence this function assumes anything found is a PHY, or can be
 * treated as a PHY. Other MDIO devices, such as switches, will
 * probably not be found during the scan.
 */
struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
{
        struct phy_device *phydev;
        int err;

        phydev = get_phy_device(bus, addr, false);
        if (IS_ERR(phydev))
                return phydev;

        /*
         * For DT, see if the auto-probed phy has a correspoding child
         * in the bus node, and set the of_node pointer in this case.
         */
        of_mdiobus_link_mdiodev(bus, &phydev->mdio);

        err = phy_device_register(phydev);
        if (err) {
                phy_device_free(phydev);
                return ERR_PTR(-ENODEV);
        }

        return phydev;
}
EXPORT_SYMBOL(mdiobus_scan);

/**
 * __mdiobus_read - Unlocked version of the mdiobus_read function
 * @bus: the mii_bus struct
 * @addr: the phy address
 * @regnum: register number to read
 *
 * Read a MDIO bus register. Caller must hold the mdio bus lock.
 *
 * NOTE: MUST NOT be called from interrupt context.
 */
int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
{
        int retval;

        WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));

        retval = bus->read(bus, addr, regnum);

        trace_mdio_access(bus, 1, addr, regnum, retval, retval);

        return retval;
}
EXPORT_SYMBOL(__mdiobus_read);

/**
 * __mdiobus_write - Unlocked version of the mdiobus_write function
 * @bus: the mii_bus struct
 * @addr: the phy address
 * @regnum: register number to write
 * @val: value to write to @regnum
 *
 * Write a MDIO bus register. Caller must hold the mdio bus lock.
 *
 * NOTE: MUST NOT be called from interrupt context.
 */
int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
{
        int err;

        WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));

        err = bus->write(bus, addr, regnum, val);

        trace_mdio_access(bus, 0, addr, regnum, val, err);

        return err;
}
EXPORT_SYMBOL(__mdiobus_write);

/**
 * mdiobus_read_nested - Nested version of the mdiobus_read function
 * @bus: the mii_bus struct
 * @addr: the phy address
 * @regnum: register number to read
 *
 * In case of nested MDIO bus access avoid lockdep false positives by
 * using mutex_lock_nested().
 *
 * NOTE: MUST NOT be called from interrupt context,
 * because the bus read/write functions may wait for an interrupt
 * to conclude the operation.
 */
int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum)
{
        int retval;

        BUG_ON(in_interrupt());

        mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
        retval = __mdiobus_read(bus, addr, regnum);
        mutex_unlock(&bus->mdio_lock);

        return retval;
}
EXPORT_SYMBOL(mdiobus_read_nested);

/**
 * mdiobus_read - Convenience function for reading a given MII mgmt register
 * @bus: the mii_bus struct
 * @addr: the phy address
 * @regnum: register number to read
 *
 * NOTE: MUST NOT be called from interrupt context,
 * because the bus read/write functions may wait for an interrupt
 * to conclude the operation.
 */
int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
{
        int retval;

        BUG_ON(in_interrupt());

        mutex_lock(&bus->mdio_lock);
        retval = __mdiobus_read(bus, addr, regnum);
        mutex_unlock(&bus->mdio_lock);

        return retval;
}
EXPORT_SYMBOL(mdiobus_read);

/**
 * mdiobus_write_nested - Nested version of the mdiobus_write function
 * @bus: the mii_bus struct
 * @addr: the phy address
 * @regnum: register number to write
 * @val: value to write to @regnum
 *
 * In case of nested MDIO bus access avoid lockdep false positives by
 * using mutex_lock_nested().
 *
 * NOTE: MUST NOT be called from interrupt context,
 * because the bus read/write functions may wait for an interrupt
 * to conclude the operation.
 */
int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val)
{
        int err;

        BUG_ON(in_interrupt());

        mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
        err = __mdiobus_write(bus, addr, regnum, val);
        mutex_unlock(&bus->mdio_lock);

        return err;
}
EXPORT_SYMBOL(mdiobus_write_nested);

/**
 * mdiobus_write - Convenience function for writing a given MII mgmt register
 * @bus: the mii_bus struct
 * @addr: the phy address
 * @regnum: register number to write
 * @val: value to write to @regnum
 *
 * NOTE: MUST NOT be called from interrupt context,
 * because the bus read/write functions may wait for an interrupt
 * to conclude the operation.
 */
int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
{
        int err;

        BUG_ON(in_interrupt());

        mutex_lock(&bus->mdio_lock);
        err = __mdiobus_write(bus, addr, regnum, val);
        mutex_unlock(&bus->mdio_lock);

        return err;
}
EXPORT_SYMBOL(mdiobus_write);

/**
 * mdio_bus_match - determine if given MDIO driver supports the given
 *                  MDIO device
 * @dev: target MDIO device
 * @drv: given MDIO driver
 *
 * Description: Given a MDIO device, and a MDIO driver, return 1 if
 *   the driver supports the device.  Otherwise, return 0. This may
 *   require calling the devices own match function, since different classes
 *   of MDIO devices have different match criteria.
 */
static int mdio_bus_match(struct device *dev, struct device_driver *drv)
{
        struct mdio_device *mdio = to_mdio_device(dev);

        if (of_driver_match_device(dev, drv))
                return 1;

        if (mdio->bus_match)
                return mdio->bus_match(dev, drv);

        return 0;
}

static int mdio_uevent(struct device *dev, struct kobj_uevent_env *env)
{
        int rc;

        /* Some devices have extra OF data and an OF-style MODALIAS */
        rc = of_device_uevent_modalias(dev, env);
        if (rc != -ENODEV)
                return rc;

        return 0;
}

#ifdef CONFIG_PM
static int mdio_bus_suspend(struct device *dev)
{
        struct mdio_device *mdio = to_mdio_device(dev);

        if (mdio->pm_ops && mdio->pm_ops->suspend)
                return mdio->pm_ops->suspend(dev);

        return 0;
}

static int mdio_bus_resume(struct device *dev)
{
        struct mdio_device *mdio = to_mdio_device(dev);

        if (mdio->pm_ops && mdio->pm_ops->resume)
                return mdio->pm_ops->resume(dev);

        return 0;
}

static int mdio_bus_restore(struct device *dev)
{
        struct mdio_device *mdio = to_mdio_device(dev);

        if (mdio->pm_ops && mdio->pm_ops->restore)
                return mdio->pm_ops->restore(dev);

        return 0;
}

static const struct dev_pm_ops mdio_bus_pm_ops = {
        .suspend = mdio_bus_suspend,
        .resume = mdio_bus_resume,
        .freeze = mdio_bus_suspend,
        .thaw = mdio_bus_resume,
        .restore = mdio_bus_restore,
};

#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)

#else

#define MDIO_BUS_PM_OPS NULL

#endif /* CONFIG_PM */

struct bus_type mdio_bus_type = {
        .name           = "mdio_bus",
        .match          = mdio_bus_match,
        .uevent         = mdio_uevent,
        .pm             = MDIO_BUS_PM_OPS,
};
EXPORT_SYMBOL(mdio_bus_type);

int __init mdio_bus_init(void)
{
        int ret;

        ret = class_register(&mdio_bus_class);
        if (!ret) {
                ret = bus_register(&mdio_bus_type);
                if (ret)
                        class_unregister(&mdio_bus_class);
        }

        return ret;
}
EXPORT_SYMBOL_GPL(mdio_bus_init);

#if IS_ENABLED(CONFIG_PHYLIB)
void mdio_bus_exit(void)
{
        class_unregister(&mdio_bus_class);
        bus_unregister(&mdio_bus_type);
}
EXPORT_SYMBOL_GPL(mdio_bus_exit);
#else
module_init(mdio_bus_init);
/* no module_exit, intentional */
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MDIO bus/device layer");
#endif