linux/drivers/net/wan/ixp4xx_hss.c
<<
>>
Prefs
   1/*
   2 * Intel IXP4xx HSS (synchronous serial port) driver for Linux
   3 *
   4 * Copyright (C) 2007-2008 Krzysztof Hałasa <khc@pm.waw.pl>
   5 *
   6 * This program is free software; you can redistribute it and/or modify it
   7 * under the terms of version 2 of the GNU General Public License
   8 * as published by the Free Software Foundation.
   9 */
  10
  11#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  12
  13#include <linux/module.h>
  14#include <linux/bitops.h>
  15#include <linux/cdev.h>
  16#include <linux/dma-mapping.h>
  17#include <linux/dmapool.h>
  18#include <linux/fs.h>
  19#include <linux/hdlc.h>
  20#include <linux/io.h>
  21#include <linux/kernel.h>
  22#include <linux/platform_device.h>
  23#include <linux/poll.h>
  24#include <linux/slab.h>
  25#include <mach/npe.h>
  26#include <mach/qmgr.h>
  27
  28#define DEBUG_DESC              0
  29#define DEBUG_RX                0
  30#define DEBUG_TX                0
  31#define DEBUG_PKT_BYTES         0
  32#define DEBUG_CLOSE             0
  33
  34#define DRV_NAME                "ixp4xx_hss"
  35
  36#define PKT_EXTRA_FLAGS         0 /* orig 1 */
  37#define PKT_NUM_PIPES           1 /* 1, 2 or 4 */
  38#define PKT_PIPE_FIFO_SIZEW     4 /* total 4 dwords per HSS */
  39
  40#define RX_DESCS                16 /* also length of all RX queues */
  41#define TX_DESCS                16 /* also length of all TX queues */
  42
  43#define POOL_ALLOC_SIZE         (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
  44#define RX_SIZE                 (HDLC_MAX_MRU + 4) /* NPE needs more space */
  45#define MAX_CLOSE_WAIT          1000 /* microseconds */
  46#define HSS_COUNT               2
  47#define FRAME_SIZE              256 /* doesn't matter at this point */
  48#define FRAME_OFFSET            0
  49#define MAX_CHANNELS            (FRAME_SIZE / 8)
  50
  51#define NAPI_WEIGHT             16
  52
  53/* Queue IDs */
  54#define HSS0_CHL_RXTRIG_QUEUE   12      /* orig size = 32 dwords */
  55#define HSS0_PKT_RX_QUEUE       13      /* orig size = 32 dwords */
  56#define HSS0_PKT_TX0_QUEUE      14      /* orig size = 16 dwords */
  57#define HSS0_PKT_TX1_QUEUE      15
  58#define HSS0_PKT_TX2_QUEUE      16
  59#define HSS0_PKT_TX3_QUEUE      17
  60#define HSS0_PKT_RXFREE0_QUEUE  18      /* orig size = 16 dwords */
  61#define HSS0_PKT_RXFREE1_QUEUE  19
  62#define HSS0_PKT_RXFREE2_QUEUE  20
  63#define HSS0_PKT_RXFREE3_QUEUE  21
  64#define HSS0_PKT_TXDONE_QUEUE   22      /* orig size = 64 dwords */
  65
  66#define HSS1_CHL_RXTRIG_QUEUE   10
  67#define HSS1_PKT_RX_QUEUE       0
  68#define HSS1_PKT_TX0_QUEUE      5
  69#define HSS1_PKT_TX1_QUEUE      6
  70#define HSS1_PKT_TX2_QUEUE      7
  71#define HSS1_PKT_TX3_QUEUE      8
  72#define HSS1_PKT_RXFREE0_QUEUE  1
  73#define HSS1_PKT_RXFREE1_QUEUE  2
  74#define HSS1_PKT_RXFREE2_QUEUE  3
  75#define HSS1_PKT_RXFREE3_QUEUE  4
  76#define HSS1_PKT_TXDONE_QUEUE   9
  77
  78#define NPE_PKT_MODE_HDLC               0
  79#define NPE_PKT_MODE_RAW                1
  80#define NPE_PKT_MODE_56KMODE            2
  81#define NPE_PKT_MODE_56KENDIAN_MSB      4
  82
  83/* PKT_PIPE_HDLC_CFG_WRITE flags */
  84#define PKT_HDLC_IDLE_ONES              0x1 /* default = flags */
  85#define PKT_HDLC_CRC_32                 0x2 /* default = CRC-16 */
  86#define PKT_HDLC_MSB_ENDIAN             0x4 /* default = LE */
  87
  88
  89/* hss_config, PCRs */
  90/* Frame sync sampling, default = active low */
  91#define PCR_FRM_SYNC_ACTIVE_HIGH        0x40000000
  92#define PCR_FRM_SYNC_FALLINGEDGE        0x80000000
  93#define PCR_FRM_SYNC_RISINGEDGE         0xC0000000
  94
  95/* Frame sync pin: input (default) or output generated off a given clk edge */
  96#define PCR_FRM_SYNC_OUTPUT_FALLING     0x20000000
  97#define PCR_FRM_SYNC_OUTPUT_RISING      0x30000000
  98
  99/* Frame and data clock sampling on edge, default = falling */
 100#define PCR_FCLK_EDGE_RISING            0x08000000
 101#define PCR_DCLK_EDGE_RISING            0x04000000
 102
 103/* Clock direction, default = input */
 104#define PCR_SYNC_CLK_DIR_OUTPUT         0x02000000
 105
 106/* Generate/Receive frame pulses, default = enabled */
 107#define PCR_FRM_PULSE_DISABLED          0x01000000
 108
 109 /* Data rate is full (default) or half the configured clk speed */
 110#define PCR_HALF_CLK_RATE               0x00200000
 111
 112/* Invert data between NPE and HSS FIFOs? (default = no) */
 113#define PCR_DATA_POLARITY_INVERT        0x00100000
 114
 115/* TX/RX endianness, default = LSB */
 116#define PCR_MSB_ENDIAN                  0x00080000
 117
 118/* Normal (default) / open drain mode (TX only) */
 119#define PCR_TX_PINS_OPEN_DRAIN          0x00040000
 120
 121/* No framing bit transmitted and expected on RX? (default = framing bit) */
 122#define PCR_SOF_NO_FBIT                 0x00020000
 123
 124/* Drive data pins? */
 125#define PCR_TX_DATA_ENABLE              0x00010000
 126
 127/* Voice 56k type: drive the data pins low (default), high, high Z */
 128#define PCR_TX_V56K_HIGH                0x00002000
 129#define PCR_TX_V56K_HIGH_IMP            0x00004000
 130
 131/* Unassigned type: drive the data pins low (default), high, high Z */
 132#define PCR_TX_UNASS_HIGH               0x00000800
 133#define PCR_TX_UNASS_HIGH_IMP           0x00001000
 134
 135/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
 136#define PCR_TX_FB_HIGH_IMP              0x00000400
 137
 138/* 56k data endiannes - which bit unused: high (default) or low */
 139#define PCR_TX_56KE_BIT_0_UNUSED        0x00000200
 140
 141/* 56k data transmission type: 32/8 bit data (default) or 56K data */
 142#define PCR_TX_56KS_56K_DATA            0x00000100
 143
 144/* hss_config, cCR */
 145/* Number of packetized clients, default = 1 */
 146#define CCR_NPE_HFIFO_2_HDLC            0x04000000
 147#define CCR_NPE_HFIFO_3_OR_4HDLC        0x08000000
 148
 149/* default = no loopback */
 150#define CCR_LOOPBACK                    0x02000000
 151
 152/* HSS number, default = 0 (first) */
 153#define CCR_SECOND_HSS                  0x01000000
 154
 155
 156/* hss_config, clkCR: main:10, num:10, denom:12 */
 157#define CLK42X_SPEED_EXP        ((0x3FF << 22) | (  2 << 12) |   15) /*65 KHz*/
 158
 159#define CLK42X_SPEED_512KHZ     ((  130 << 22) | (  2 << 12) |   15)
 160#define CLK42X_SPEED_1536KHZ    ((   43 << 22) | ( 18 << 12) |   47)
 161#define CLK42X_SPEED_1544KHZ    ((   43 << 22) | ( 33 << 12) |  192)
 162#define CLK42X_SPEED_2048KHZ    ((   32 << 22) | ( 34 << 12) |   63)
 163#define CLK42X_SPEED_4096KHZ    ((   16 << 22) | ( 34 << 12) |  127)
 164#define CLK42X_SPEED_8192KHZ    ((    8 << 22) | ( 34 << 12) |  255)
 165
 166#define CLK46X_SPEED_512KHZ     ((  130 << 22) | ( 24 << 12) |  127)
 167#define CLK46X_SPEED_1536KHZ    ((   43 << 22) | (152 << 12) |  383)
 168#define CLK46X_SPEED_1544KHZ    ((   43 << 22) | ( 66 << 12) |  385)
 169#define CLK46X_SPEED_2048KHZ    ((   32 << 22) | (280 << 12) |  511)
 170#define CLK46X_SPEED_4096KHZ    ((   16 << 22) | (280 << 12) | 1023)
 171#define CLK46X_SPEED_8192KHZ    ((    8 << 22) | (280 << 12) | 2047)
 172
 173/*
 174 * HSS_CONFIG_CLOCK_CR register consists of 3 parts:
 175 *     A (10 bits), B (10 bits) and C (12 bits).
 176 * IXP42x HSS clock generator operation (verified with an oscilloscope):
 177 * Each clock bit takes 7.5 ns (1 / 133.xx MHz).
 178 * The clock sequence consists of (C - B) states of 0s and 1s, each state is
 179 * A bits wide. It's followed by (B + 1) states of 0s and 1s, each state is
 180 * (A + 1) bits wide.
 181 *
 182 * The resulting average clock frequency (assuming 33.333 MHz oscillator) is:
 183 * freq = 66.666 MHz / (A + (B + 1) / (C + 1))
 184 * minimum freq = 66.666 MHz / (A + 1)
 185 * maximum freq = 66.666 MHz / A
 186 *
 187 * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7
 188 * freq = 66.666 MHz / (2 + (2 + 1) / (7 + 1)) = 28.07 MHz (Mb/s).
 189 * The clock sequence is: 1100110011 (5 doubles) 000111000 (3 triples).
 190 * The sequence takes (C - B) * A + (B + 1) * (A + 1) = 5 * 2 + 3 * 3 bits
 191 * = 19 bits (each 7.5 ns long) = 142.5 ns (then the sequence repeats).
 192 * The sequence consists of 4 complete clock periods, thus the average
 193 * frequency (= clock rate) is 4 / 142.5 ns = 28.07 MHz (Mb/s).
 194 * (max specified clock rate for IXP42x HSS is 8.192 Mb/s).
 195 */
 196
 197/* hss_config, LUT entries */
 198#define TDMMAP_UNASSIGNED       0
 199#define TDMMAP_HDLC             1       /* HDLC - packetized */
 200#define TDMMAP_VOICE56K         2       /* Voice56K - 7-bit channelized */
 201#define TDMMAP_VOICE64K         3       /* Voice64K - 8-bit channelized */
 202
 203/* offsets into HSS config */
 204#define HSS_CONFIG_TX_PCR       0x00 /* port configuration registers */
 205#define HSS_CONFIG_RX_PCR       0x04
 206#define HSS_CONFIG_CORE_CR      0x08 /* loopback control, HSS# */
 207#define HSS_CONFIG_CLOCK_CR     0x0C /* clock generator control */
 208#define HSS_CONFIG_TX_FCR       0x10 /* frame configuration registers */
 209#define HSS_CONFIG_RX_FCR       0x14
 210#define HSS_CONFIG_TX_LUT       0x18 /* channel look-up tables */
 211#define HSS_CONFIG_RX_LUT       0x38
 212
 213
 214/* NPE command codes */
 215/* writes the ConfigWord value to the location specified by offset */
 216#define PORT_CONFIG_WRITE               0x40
 217
 218/* triggers the NPE to load the contents of the configuration table */
 219#define PORT_CONFIG_LOAD                0x41
 220
 221/* triggers the NPE to return an HssErrorReadResponse message */
 222#define PORT_ERROR_READ                 0x42
 223
 224/* triggers the NPE to reset internal status and enable the HssPacketized
 225   operation for the flow specified by pPipe */
 226#define PKT_PIPE_FLOW_ENABLE            0x50
 227#define PKT_PIPE_FLOW_DISABLE           0x51
 228#define PKT_NUM_PIPES_WRITE             0x52
 229#define PKT_PIPE_FIFO_SIZEW_WRITE       0x53
 230#define PKT_PIPE_HDLC_CFG_WRITE         0x54
 231#define PKT_PIPE_IDLE_PATTERN_WRITE     0x55
 232#define PKT_PIPE_RX_SIZE_WRITE          0x56
 233#define PKT_PIPE_MODE_WRITE             0x57
 234
 235/* HDLC packet status values - desc->status */
 236#define ERR_SHUTDOWN            1 /* stop or shutdown occurrence */
 237#define ERR_HDLC_ALIGN          2 /* HDLC alignment error */
 238#define ERR_HDLC_FCS            3 /* HDLC Frame Check Sum error */
 239#define ERR_RXFREE_Q_EMPTY      4 /* RX-free queue became empty while receiving
 240                                     this packet (if buf_len < pkt_len) */
 241#define ERR_HDLC_TOO_LONG       5 /* HDLC frame size too long */
 242#define ERR_HDLC_ABORT          6 /* abort sequence received */
 243#define ERR_DISCONNECTING       7 /* disconnect is in progress */
 244
 245
 246#ifdef __ARMEB__
 247typedef struct sk_buff buffer_t;
 248#define free_buffer dev_kfree_skb
 249#define free_buffer_irq dev_kfree_skb_irq
 250#else
 251typedef void buffer_t;
 252#define free_buffer kfree
 253#define free_buffer_irq kfree
 254#endif
 255
 256struct port {
 257        struct device *dev;
 258        struct npe *npe;
 259        struct net_device *netdev;
 260        struct napi_struct napi;
 261        struct hss_plat_info *plat;
 262        buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
 263        struct desc *desc_tab;  /* coherent */
 264        u32 desc_tab_phys;
 265        unsigned int id;
 266        unsigned int clock_type, clock_rate, loopback;
 267        unsigned int initialized, carrier;
 268        u8 hdlc_cfg;
 269        u32 clock_reg;
 270};
 271
 272/* NPE message structure */
 273struct msg {
 274#ifdef __ARMEB__
 275        u8 cmd, unused, hss_port, index;
 276        union {
 277                struct { u8 data8a, data8b, data8c, data8d; };
 278                struct { u16 data16a, data16b; };
 279                struct { u32 data32; };
 280        };
 281#else
 282        u8 index, hss_port, unused, cmd;
 283        union {
 284                struct { u8 data8d, data8c, data8b, data8a; };
 285                struct { u16 data16b, data16a; };
 286                struct { u32 data32; };
 287        };
 288#endif
 289};
 290
 291/* HDLC packet descriptor */
 292struct desc {
 293        u32 next;               /* pointer to next buffer, unused */
 294
 295#ifdef __ARMEB__
 296        u16 buf_len;            /* buffer length */
 297        u16 pkt_len;            /* packet length */
 298        u32 data;               /* pointer to data buffer in RAM */
 299        u8 status;
 300        u8 error_count;
 301        u16 __reserved;
 302#else
 303        u16 pkt_len;            /* packet length */
 304        u16 buf_len;            /* buffer length */
 305        u32 data;               /* pointer to data buffer in RAM */
 306        u16 __reserved;
 307        u8 error_count;
 308        u8 status;
 309#endif
 310        u32 __reserved1[4];
 311};
 312
 313
 314#define rx_desc_phys(port, n)   ((port)->desc_tab_phys +                \
 315                                 (n) * sizeof(struct desc))
 316#define rx_desc_ptr(port, n)    (&(port)->desc_tab[n])
 317
 318#define tx_desc_phys(port, n)   ((port)->desc_tab_phys +                \
 319                                 ((n) + RX_DESCS) * sizeof(struct desc))
 320#define tx_desc_ptr(port, n)    (&(port)->desc_tab[(n) + RX_DESCS])
 321
 322/*****************************************************************************
 323 * global variables
 324 ****************************************************************************/
 325
 326static int ports_open;
 327static struct dma_pool *dma_pool;
 328static spinlock_t npe_lock;
 329
 330static const struct {
 331        int tx, txdone, rx, rxfree;
 332}queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE,
 333                  HSS0_PKT_RXFREE0_QUEUE},
 334                 {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE,
 335                  HSS1_PKT_RXFREE0_QUEUE},
 336};
 337
 338/*****************************************************************************
 339 * utility functions
 340 ****************************************************************************/
 341
 342static inline struct port* dev_to_port(struct net_device *dev)
 343{
 344        return dev_to_hdlc(dev)->priv;
 345}
 346
 347#ifndef __ARMEB__
 348static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
 349{
 350        int i;
 351        for (i = 0; i < cnt; i++)
 352                dest[i] = swab32(src[i]);
 353}
 354#endif
 355
 356/*****************************************************************************
 357 * HSS access
 358 ****************************************************************************/
 359
 360static void hss_npe_send(struct port *port, struct msg *msg, const char* what)
 361{
 362        u32 *val = (u32*)msg;
 363        if (npe_send_message(port->npe, msg, what)) {
 364                pr_crit("HSS-%i: unable to send command [%08X:%08X] to %s\n",
 365                        port->id, val[0], val[1], npe_name(port->npe));
 366                BUG();
 367        }
 368}
 369
 370static void hss_config_set_lut(struct port *port)
 371{
 372        struct msg msg;
 373        int ch;
 374
 375        memset(&msg, 0, sizeof(msg));
 376        msg.cmd = PORT_CONFIG_WRITE;
 377        msg.hss_port = port->id;
 378
 379        for (ch = 0; ch < MAX_CHANNELS; ch++) {
 380                msg.data32 >>= 2;
 381                msg.data32 |= TDMMAP_HDLC << 30;
 382
 383                if (ch % 16 == 15) {
 384                        msg.index = HSS_CONFIG_TX_LUT + ((ch / 4) & ~3);
 385                        hss_npe_send(port, &msg, "HSS_SET_TX_LUT");
 386
 387                        msg.index += HSS_CONFIG_RX_LUT - HSS_CONFIG_TX_LUT;
 388                        hss_npe_send(port, &msg, "HSS_SET_RX_LUT");
 389                }
 390        }
 391}
 392
 393static void hss_config(struct port *port)
 394{
 395        struct msg msg;
 396
 397        memset(&msg, 0, sizeof(msg));
 398        msg.cmd = PORT_CONFIG_WRITE;
 399        msg.hss_port = port->id;
 400        msg.index = HSS_CONFIG_TX_PCR;
 401        msg.data32 = PCR_FRM_PULSE_DISABLED | PCR_MSB_ENDIAN |
 402                PCR_TX_DATA_ENABLE | PCR_SOF_NO_FBIT;
 403        if (port->clock_type == CLOCK_INT)
 404                msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
 405        hss_npe_send(port, &msg, "HSS_SET_TX_PCR");
 406
 407        msg.index = HSS_CONFIG_RX_PCR;
 408        msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
 409        hss_npe_send(port, &msg, "HSS_SET_RX_PCR");
 410
 411        memset(&msg, 0, sizeof(msg));
 412        msg.cmd = PORT_CONFIG_WRITE;
 413        msg.hss_port = port->id;
 414        msg.index = HSS_CONFIG_CORE_CR;
 415        msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
 416                (port->id ? CCR_SECOND_HSS : 0);
 417        hss_npe_send(port, &msg, "HSS_SET_CORE_CR");
 418
 419        memset(&msg, 0, sizeof(msg));
 420        msg.cmd = PORT_CONFIG_WRITE;
 421        msg.hss_port = port->id;
 422        msg.index = HSS_CONFIG_CLOCK_CR;
 423        msg.data32 = port->clock_reg;
 424        hss_npe_send(port, &msg, "HSS_SET_CLOCK_CR");
 425
 426        memset(&msg, 0, sizeof(msg));
 427        msg.cmd = PORT_CONFIG_WRITE;
 428        msg.hss_port = port->id;
 429        msg.index = HSS_CONFIG_TX_FCR;
 430        msg.data16a = FRAME_OFFSET;
 431        msg.data16b = FRAME_SIZE - 1;
 432        hss_npe_send(port, &msg, "HSS_SET_TX_FCR");
 433
 434        memset(&msg, 0, sizeof(msg));
 435        msg.cmd = PORT_CONFIG_WRITE;
 436        msg.hss_port = port->id;
 437        msg.index = HSS_CONFIG_RX_FCR;
 438        msg.data16a = FRAME_OFFSET;
 439        msg.data16b = FRAME_SIZE - 1;
 440        hss_npe_send(port, &msg, "HSS_SET_RX_FCR");
 441
 442        hss_config_set_lut(port);
 443
 444        memset(&msg, 0, sizeof(msg));
 445        msg.cmd = PORT_CONFIG_LOAD;
 446        msg.hss_port = port->id;
 447        hss_npe_send(port, &msg, "HSS_LOAD_CONFIG");
 448
 449        if (npe_recv_message(port->npe, &msg, "HSS_LOAD_CONFIG") ||
 450            /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
 451            msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
 452                pr_crit("HSS-%i: HSS_LOAD_CONFIG failed\n", port->id);
 453                BUG();
 454        }
 455
 456        /* HDLC may stop working without this - check FIXME */
 457        npe_recv_message(port->npe, &msg, "FLUSH_IT");
 458}
 459
 460static void hss_set_hdlc_cfg(struct port *port)
 461{
 462        struct msg msg;
 463
 464        memset(&msg, 0, sizeof(msg));
 465        msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
 466        msg.hss_port = port->id;
 467        msg.data8a = port->hdlc_cfg; /* rx_cfg */
 468        msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
 469        hss_npe_send(port, &msg, "HSS_SET_HDLC_CFG");
 470}
 471
 472static u32 hss_get_status(struct port *port)
 473{
 474        struct msg msg;
 475
 476        memset(&msg, 0, sizeof(msg));
 477        msg.cmd = PORT_ERROR_READ;
 478        msg.hss_port = port->id;
 479        hss_npe_send(port, &msg, "PORT_ERROR_READ");
 480        if (npe_recv_message(port->npe, &msg, "PORT_ERROR_READ")) {
 481                pr_crit("HSS-%i: unable to read HSS status\n", port->id);
 482                BUG();
 483        }
 484
 485        return msg.data32;
 486}
 487
 488static void hss_start_hdlc(struct port *port)
 489{
 490        struct msg msg;
 491
 492        memset(&msg, 0, sizeof(msg));
 493        msg.cmd = PKT_PIPE_FLOW_ENABLE;
 494        msg.hss_port = port->id;
 495        msg.data32 = 0;
 496        hss_npe_send(port, &msg, "HSS_ENABLE_PKT_PIPE");
 497}
 498
 499static void hss_stop_hdlc(struct port *port)
 500{
 501        struct msg msg;
 502
 503        memset(&msg, 0, sizeof(msg));
 504        msg.cmd = PKT_PIPE_FLOW_DISABLE;
 505        msg.hss_port = port->id;
 506        hss_npe_send(port, &msg, "HSS_DISABLE_PKT_PIPE");
 507        hss_get_status(port); /* make sure it's halted */
 508}
 509
 510static int hss_load_firmware(struct port *port)
 511{
 512        struct msg msg;
 513        int err;
 514
 515        if (port->initialized)
 516                return 0;
 517
 518        if (!npe_running(port->npe) &&
 519            (err = npe_load_firmware(port->npe, npe_name(port->npe),
 520                                     port->dev)))
 521                return err;
 522
 523        /* HDLC mode configuration */
 524        memset(&msg, 0, sizeof(msg));
 525        msg.cmd = PKT_NUM_PIPES_WRITE;
 526        msg.hss_port = port->id;
 527        msg.data8a = PKT_NUM_PIPES;
 528        hss_npe_send(port, &msg, "HSS_SET_PKT_PIPES");
 529
 530        msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
 531        msg.data8a = PKT_PIPE_FIFO_SIZEW;
 532        hss_npe_send(port, &msg, "HSS_SET_PKT_FIFO");
 533
 534        msg.cmd = PKT_PIPE_MODE_WRITE;
 535        msg.data8a = NPE_PKT_MODE_HDLC;
 536        /* msg.data8b = inv_mask */
 537        /* msg.data8c = or_mask */
 538        hss_npe_send(port, &msg, "HSS_SET_PKT_MODE");
 539
 540        msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
 541        msg.data16a = HDLC_MAX_MRU; /* including CRC */
 542        hss_npe_send(port, &msg, "HSS_SET_PKT_RX_SIZE");
 543
 544        msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
 545        msg.data32 = 0x7F7F7F7F; /* ??? FIXME */
 546        hss_npe_send(port, &msg, "HSS_SET_PKT_IDLE");
 547
 548        port->initialized = 1;
 549        return 0;
 550}
 551
 552/*****************************************************************************
 553 * packetized (HDLC) operation
 554 ****************************************************************************/
 555
 556static inline void debug_pkt(struct net_device *dev, const char *func,
 557                             u8 *data, int len)
 558{
 559#if DEBUG_PKT_BYTES
 560        int i;
 561
 562        printk(KERN_DEBUG "%s: %s(%i)", dev->name, func, len);
 563        for (i = 0; i < len; i++) {
 564                if (i >= DEBUG_PKT_BYTES)
 565                        break;
 566                printk("%s%02X", !(i % 4) ? " " : "", data[i]);
 567        }
 568        printk("\n");
 569#endif
 570}
 571
 572
 573static inline void debug_desc(u32 phys, struct desc *desc)
 574{
 575#if DEBUG_DESC
 576        printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
 577               phys, desc->next, desc->buf_len, desc->pkt_len,
 578               desc->data, desc->status, desc->error_count);
 579#endif
 580}
 581
 582static inline int queue_get_desc(unsigned int queue, struct port *port,
 583                                 int is_tx)
 584{
 585        u32 phys, tab_phys, n_desc;
 586        struct desc *tab;
 587
 588        if (!(phys = qmgr_get_entry(queue)))
 589                return -1;
 590
 591        BUG_ON(phys & 0x1F);
 592        tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
 593        tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
 594        n_desc = (phys - tab_phys) / sizeof(struct desc);
 595        BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
 596        debug_desc(phys, &tab[n_desc]);
 597        BUG_ON(tab[n_desc].next);
 598        return n_desc;
 599}
 600
 601static inline void queue_put_desc(unsigned int queue, u32 phys,
 602                                  struct desc *desc)
 603{
 604        debug_desc(phys, desc);
 605        BUG_ON(phys & 0x1F);
 606        qmgr_put_entry(queue, phys);
 607        /* Don't check for queue overflow here, we've allocated sufficient
 608           length and queues >= 32 don't support this check anyway. */
 609}
 610
 611
 612static inline void dma_unmap_tx(struct port *port, struct desc *desc)
 613{
 614#ifdef __ARMEB__
 615        dma_unmap_single(&port->netdev->dev, desc->data,
 616                         desc->buf_len, DMA_TO_DEVICE);
 617#else
 618        dma_unmap_single(&port->netdev->dev, desc->data & ~3,
 619                         ALIGN((desc->data & 3) + desc->buf_len, 4),
 620                         DMA_TO_DEVICE);
 621#endif
 622}
 623
 624
 625static void hss_hdlc_set_carrier(void *pdev, int carrier)
 626{
 627        struct net_device *netdev = pdev;
 628        struct port *port = dev_to_port(netdev);
 629        unsigned long flags;
 630
 631        spin_lock_irqsave(&npe_lock, flags);
 632        port->carrier = carrier;
 633        if (!port->loopback) {
 634                if (carrier)
 635                        netif_carrier_on(netdev);
 636                else
 637                        netif_carrier_off(netdev);
 638        }
 639        spin_unlock_irqrestore(&npe_lock, flags);
 640}
 641
 642static void hss_hdlc_rx_irq(void *pdev)
 643{
 644        struct net_device *dev = pdev;
 645        struct port *port = dev_to_port(dev);
 646
 647#if DEBUG_RX
 648        printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
 649#endif
 650        qmgr_disable_irq(queue_ids[port->id].rx);
 651        napi_schedule(&port->napi);
 652}
 653
 654static int hss_hdlc_poll(struct napi_struct *napi, int budget)
 655{
 656        struct port *port = container_of(napi, struct port, napi);
 657        struct net_device *dev = port->netdev;
 658        unsigned int rxq = queue_ids[port->id].rx;
 659        unsigned int rxfreeq = queue_ids[port->id].rxfree;
 660        int received = 0;
 661
 662#if DEBUG_RX
 663        printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
 664#endif
 665
 666        while (received < budget) {
 667                struct sk_buff *skb;
 668                struct desc *desc;
 669                int n;
 670#ifdef __ARMEB__
 671                struct sk_buff *temp;
 672                u32 phys;
 673#endif
 674
 675                if ((n = queue_get_desc(rxq, port, 0)) < 0) {
 676#if DEBUG_RX
 677                        printk(KERN_DEBUG "%s: hss_hdlc_poll"
 678                               " napi_complete\n", dev->name);
 679#endif
 680                        napi_complete(napi);
 681                        qmgr_enable_irq(rxq);
 682                        if (!qmgr_stat_empty(rxq) &&
 683                            napi_reschedule(napi)) {
 684#if DEBUG_RX
 685                                printk(KERN_DEBUG "%s: hss_hdlc_poll"
 686                                       " napi_reschedule succeeded\n",
 687                                       dev->name);
 688#endif
 689                                qmgr_disable_irq(rxq);
 690                                continue;
 691                        }
 692#if DEBUG_RX
 693                        printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
 694                               dev->name);
 695#endif
 696                        return received; /* all work done */
 697                }
 698
 699                desc = rx_desc_ptr(port, n);
 700#if 0 /* FIXME - error_count counts modulo 256, perhaps we should use it */
 701                if (desc->error_count)
 702                        printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
 703                               " errors %u\n", dev->name, desc->status,
 704                               desc->error_count);
 705#endif
 706                skb = NULL;
 707                switch (desc->status) {
 708                case 0:
 709#ifdef __ARMEB__
 710                        if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
 711                                phys = dma_map_single(&dev->dev, skb->data,
 712                                                      RX_SIZE,
 713                                                      DMA_FROM_DEVICE);
 714                                if (dma_mapping_error(&dev->dev, phys)) {
 715                                        dev_kfree_skb(skb);
 716                                        skb = NULL;
 717                                }
 718                        }
 719#else
 720                        skb = netdev_alloc_skb(dev, desc->pkt_len);
 721#endif
 722                        if (!skb)
 723                                dev->stats.rx_dropped++;
 724                        break;
 725                case ERR_HDLC_ALIGN:
 726                case ERR_HDLC_ABORT:
 727                        dev->stats.rx_frame_errors++;
 728                        dev->stats.rx_errors++;
 729                        break;
 730                case ERR_HDLC_FCS:
 731                        dev->stats.rx_crc_errors++;
 732                        dev->stats.rx_errors++;
 733                        break;
 734                case ERR_HDLC_TOO_LONG:
 735                        dev->stats.rx_length_errors++;
 736                        dev->stats.rx_errors++;
 737                        break;
 738                default:        /* FIXME - remove printk */
 739                        netdev_err(dev, "hss_hdlc_poll: status 0x%02X errors %u\n",
 740                                   desc->status, desc->error_count);
 741                        dev->stats.rx_errors++;
 742                }
 743
 744                if (!skb) {
 745                        /* put the desc back on RX-ready queue */
 746                        desc->buf_len = RX_SIZE;
 747                        desc->pkt_len = desc->status = 0;
 748                        queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
 749                        continue;
 750                }
 751
 752                /* process received frame */
 753#ifdef __ARMEB__
 754                temp = skb;
 755                skb = port->rx_buff_tab[n];
 756                dma_unmap_single(&dev->dev, desc->data,
 757                                 RX_SIZE, DMA_FROM_DEVICE);
 758#else
 759                dma_sync_single_for_cpu(&dev->dev, desc->data,
 760                                        RX_SIZE, DMA_FROM_DEVICE);
 761                memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
 762                              ALIGN(desc->pkt_len, 4) / 4);
 763#endif
 764                skb_put(skb, desc->pkt_len);
 765
 766                debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
 767
 768                skb->protocol = hdlc_type_trans(skb, dev);
 769                dev->stats.rx_packets++;
 770                dev->stats.rx_bytes += skb->len;
 771                netif_receive_skb(skb);
 772
 773                /* put the new buffer on RX-free queue */
 774#ifdef __ARMEB__
 775                port->rx_buff_tab[n] = temp;
 776                desc->data = phys;
 777#endif
 778                desc->buf_len = RX_SIZE;
 779                desc->pkt_len = 0;
 780                queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
 781                received++;
 782        }
 783#if DEBUG_RX
 784        printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
 785#endif
 786        return received;        /* not all work done */
 787}
 788
 789
 790static void hss_hdlc_txdone_irq(void *pdev)
 791{
 792        struct net_device *dev = pdev;
 793        struct port *port = dev_to_port(dev);
 794        int n_desc;
 795
 796#if DEBUG_TX
 797        printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
 798#endif
 799        while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
 800                                        port, 1)) >= 0) {
 801                struct desc *desc;
 802                int start;
 803
 804                desc = tx_desc_ptr(port, n_desc);
 805
 806                dev->stats.tx_packets++;
 807                dev->stats.tx_bytes += desc->pkt_len;
 808
 809                dma_unmap_tx(port, desc);
 810#if DEBUG_TX
 811                printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
 812                       dev->name, port->tx_buff_tab[n_desc]);
 813#endif
 814                free_buffer_irq(port->tx_buff_tab[n_desc]);
 815                port->tx_buff_tab[n_desc] = NULL;
 816
 817                start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 818                queue_put_desc(port->plat->txreadyq,
 819                               tx_desc_phys(port, n_desc), desc);
 820                if (start) { /* TX-ready queue was empty */
 821#if DEBUG_TX
 822                        printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
 823                               " ready\n", dev->name);
 824#endif
 825                        netif_wake_queue(dev);
 826                }
 827        }
 828}
 829
 830static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
 831{
 832        struct port *port = dev_to_port(dev);
 833        unsigned int txreadyq = port->plat->txreadyq;
 834        int len, offset, bytes, n;
 835        void *mem;
 836        u32 phys;
 837        struct desc *desc;
 838
 839#if DEBUG_TX
 840        printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
 841#endif
 842
 843        if (unlikely(skb->len > HDLC_MAX_MRU)) {
 844                dev_kfree_skb(skb);
 845                dev->stats.tx_errors++;
 846                return NETDEV_TX_OK;
 847        }
 848
 849        debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
 850
 851        len = skb->len;
 852#ifdef __ARMEB__
 853        offset = 0; /* no need to keep alignment */
 854        bytes = len;
 855        mem = skb->data;
 856#else
 857        offset = (int)skb->data & 3; /* keep 32-bit alignment */
 858        bytes = ALIGN(offset + len, 4);
 859        if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
 860                dev_kfree_skb(skb);
 861                dev->stats.tx_dropped++;
 862                return NETDEV_TX_OK;
 863        }
 864        memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
 865        dev_kfree_skb(skb);
 866#endif
 867
 868        phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
 869        if (dma_mapping_error(&dev->dev, phys)) {
 870#ifdef __ARMEB__
 871                dev_kfree_skb(skb);
 872#else
 873                kfree(mem);
 874#endif
 875                dev->stats.tx_dropped++;
 876                return NETDEV_TX_OK;
 877        }
 878
 879        n = queue_get_desc(txreadyq, port, 1);
 880        BUG_ON(n < 0);
 881        desc = tx_desc_ptr(port, n);
 882
 883#ifdef __ARMEB__
 884        port->tx_buff_tab[n] = skb;
 885#else
 886        port->tx_buff_tab[n] = mem;
 887#endif
 888        desc->data = phys + offset;
 889        desc->buf_len = desc->pkt_len = len;
 890
 891        wmb();
 892        queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
 893
 894        if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 895#if DEBUG_TX
 896                printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
 897#endif
 898                netif_stop_queue(dev);
 899                /* we could miss TX ready interrupt */
 900                if (!qmgr_stat_below_low_watermark(txreadyq)) {
 901#if DEBUG_TX
 902                        printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
 903                               dev->name);
 904#endif
 905                        netif_wake_queue(dev);
 906                }
 907        }
 908
 909#if DEBUG_TX
 910        printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
 911#endif
 912        return NETDEV_TX_OK;
 913}
 914
 915
 916static int request_hdlc_queues(struct port *port)
 917{
 918        int err;
 919
 920        err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0,
 921                                 "%s:RX-free", port->netdev->name);
 922        if (err)
 923                return err;
 924
 925        err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0,
 926                                 "%s:RX", port->netdev->name);
 927        if (err)
 928                goto rel_rxfree;
 929
 930        err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0,
 931                                 "%s:TX", port->netdev->name);
 932        if (err)
 933                goto rel_rx;
 934
 935        err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
 936                                 "%s:TX-ready", port->netdev->name);
 937        if (err)
 938                goto rel_tx;
 939
 940        err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0,
 941                                 "%s:TX-done", port->netdev->name);
 942        if (err)
 943                goto rel_txready;
 944        return 0;
 945
 946rel_txready:
 947        qmgr_release_queue(port->plat->txreadyq);
 948rel_tx:
 949        qmgr_release_queue(queue_ids[port->id].tx);
 950rel_rx:
 951        qmgr_release_queue(queue_ids[port->id].rx);
 952rel_rxfree:
 953        qmgr_release_queue(queue_ids[port->id].rxfree);
 954        printk(KERN_DEBUG "%s: unable to request hardware queues\n",
 955               port->netdev->name);
 956        return err;
 957}
 958
 959static void release_hdlc_queues(struct port *port)
 960{
 961        qmgr_release_queue(queue_ids[port->id].rxfree);
 962        qmgr_release_queue(queue_ids[port->id].rx);
 963        qmgr_release_queue(queue_ids[port->id].txdone);
 964        qmgr_release_queue(queue_ids[port->id].tx);
 965        qmgr_release_queue(port->plat->txreadyq);
 966}
 967
 968static int init_hdlc_queues(struct port *port)
 969{
 970        int i;
 971
 972        if (!ports_open) {
 973                dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
 974                                           POOL_ALLOC_SIZE, 32, 0);
 975                if (!dma_pool)
 976                        return -ENOMEM;
 977        }
 978
 979        if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
 980                                              &port->desc_tab_phys)))
 981                return -ENOMEM;
 982        memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
 983        memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
 984        memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
 985
 986        /* Setup RX buffers */
 987        for (i = 0; i < RX_DESCS; i++) {
 988                struct desc *desc = rx_desc_ptr(port, i);
 989                buffer_t *buff;
 990                void *data;
 991#ifdef __ARMEB__
 992                if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
 993                        return -ENOMEM;
 994                data = buff->data;
 995#else
 996                if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
 997                        return -ENOMEM;
 998                data = buff;
 999#endif
1000                desc->buf_len = RX_SIZE;
1001                desc->data = dma_map_single(&port->netdev->dev, data,
1002                                            RX_SIZE, DMA_FROM_DEVICE);
1003                if (dma_mapping_error(&port->netdev->dev, desc->data)) {
1004                        free_buffer(buff);
1005                        return -EIO;
1006                }
1007                port->rx_buff_tab[i] = buff;
1008        }
1009
1010        return 0;
1011}
1012
1013static void destroy_hdlc_queues(struct port *port)
1014{
1015        int i;
1016
1017        if (port->desc_tab) {
1018                for (i = 0; i < RX_DESCS; i++) {
1019                        struct desc *desc = rx_desc_ptr(port, i);
1020                        buffer_t *buff = port->rx_buff_tab[i];
1021                        if (buff) {
1022                                dma_unmap_single(&port->netdev->dev,
1023                                                 desc->data, RX_SIZE,
1024                                                 DMA_FROM_DEVICE);
1025                                free_buffer(buff);
1026                        }
1027                }
1028                for (i = 0; i < TX_DESCS; i++) {
1029                        struct desc *desc = tx_desc_ptr(port, i);
1030                        buffer_t *buff = port->tx_buff_tab[i];
1031                        if (buff) {
1032                                dma_unmap_tx(port, desc);
1033                                free_buffer(buff);
1034                        }
1035                }
1036                dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
1037                port->desc_tab = NULL;
1038        }
1039
1040        if (!ports_open && dma_pool) {
1041                dma_pool_destroy(dma_pool);
1042                dma_pool = NULL;
1043        }
1044}
1045
1046static int hss_hdlc_open(struct net_device *dev)
1047{
1048        struct port *port = dev_to_port(dev);
1049        unsigned long flags;
1050        int i, err = 0;
1051
1052        if ((err = hdlc_open(dev)))
1053                return err;
1054
1055        if ((err = hss_load_firmware(port)))
1056                goto err_hdlc_close;
1057
1058        if ((err = request_hdlc_queues(port)))
1059                goto err_hdlc_close;
1060
1061        if ((err = init_hdlc_queues(port)))
1062                goto err_destroy_queues;
1063
1064        spin_lock_irqsave(&npe_lock, flags);
1065        if (port->plat->open)
1066                if ((err = port->plat->open(port->id, dev,
1067                                            hss_hdlc_set_carrier)))
1068                        goto err_unlock;
1069        spin_unlock_irqrestore(&npe_lock, flags);
1070
1071        /* Populate queues with buffers, no failure after this point */
1072        for (i = 0; i < TX_DESCS; i++)
1073                queue_put_desc(port->plat->txreadyq,
1074                               tx_desc_phys(port, i), tx_desc_ptr(port, i));
1075
1076        for (i = 0; i < RX_DESCS; i++)
1077                queue_put_desc(queue_ids[port->id].rxfree,
1078                               rx_desc_phys(port, i), rx_desc_ptr(port, i));
1079
1080        napi_enable(&port->napi);
1081        netif_start_queue(dev);
1082
1083        qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
1084                     hss_hdlc_rx_irq, dev);
1085
1086        qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
1087                     hss_hdlc_txdone_irq, dev);
1088        qmgr_enable_irq(queue_ids[port->id].txdone);
1089
1090        ports_open++;
1091
1092        hss_set_hdlc_cfg(port);
1093        hss_config(port);
1094
1095        hss_start_hdlc(port);
1096
1097        /* we may already have RX data, enables IRQ */
1098        napi_schedule(&port->napi);
1099        return 0;
1100
1101err_unlock:
1102        spin_unlock_irqrestore(&npe_lock, flags);
1103err_destroy_queues:
1104        destroy_hdlc_queues(port);
1105        release_hdlc_queues(port);
1106err_hdlc_close:
1107        hdlc_close(dev);
1108        return err;
1109}
1110
1111static int hss_hdlc_close(struct net_device *dev)
1112{
1113        struct port *port = dev_to_port(dev);
1114        unsigned long flags;
1115        int i, buffs = RX_DESCS; /* allocated RX buffers */
1116
1117        spin_lock_irqsave(&npe_lock, flags);
1118        ports_open--;
1119        qmgr_disable_irq(queue_ids[port->id].rx);
1120        netif_stop_queue(dev);
1121        napi_disable(&port->napi);
1122
1123        hss_stop_hdlc(port);
1124
1125        while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
1126                buffs--;
1127        while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
1128                buffs--;
1129
1130        if (buffs)
1131                netdev_crit(dev, "unable to drain RX queue, %i buffer(s) left in NPE\n",
1132                            buffs);
1133
1134        buffs = TX_DESCS;
1135        while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
1136                buffs--; /* cancel TX */
1137
1138        i = 0;
1139        do {
1140                while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
1141                        buffs--;
1142                if (!buffs)
1143                        break;
1144        } while (++i < MAX_CLOSE_WAIT);
1145
1146        if (buffs)
1147                netdev_crit(dev, "unable to drain TX queue, %i buffer(s) left in NPE\n",
1148                            buffs);
1149#if DEBUG_CLOSE
1150        if (!buffs)
1151                printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
1152#endif
1153        qmgr_disable_irq(queue_ids[port->id].txdone);
1154
1155        if (port->plat->close)
1156                port->plat->close(port->id, dev);
1157        spin_unlock_irqrestore(&npe_lock, flags);
1158
1159        destroy_hdlc_queues(port);
1160        release_hdlc_queues(port);
1161        hdlc_close(dev);
1162        return 0;
1163}
1164
1165
1166static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
1167                           unsigned short parity)
1168{
1169        struct port *port = dev_to_port(dev);
1170
1171        if (encoding != ENCODING_NRZ)
1172                return -EINVAL;
1173
1174        switch(parity) {
1175        case PARITY_CRC16_PR1_CCITT:
1176                port->hdlc_cfg = 0;
1177                return 0;
1178
1179        case PARITY_CRC32_PR1_CCITT:
1180                port->hdlc_cfg = PKT_HDLC_CRC_32;
1181                return 0;
1182
1183        default:
1184                return -EINVAL;
1185        }
1186}
1187
1188static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
1189                       u32 *best, u32 *best_diff, u32 *reg)
1190{
1191        /* a is 10-bit, b is 10-bit, c is 12-bit */
1192        u64 new_rate;
1193        u32 new_diff;
1194
1195        new_rate = ixp4xx_timer_freq * (u64)(c + 1);
1196        do_div(new_rate, a * (c + 1) + b + 1);
1197        new_diff = abs((u32)new_rate - rate);
1198
1199        if (new_diff < *best_diff) {
1200                *best = new_rate;
1201                *best_diff = new_diff;
1202                *reg = (a << 22) | (b << 12) | c;
1203        }
1204        return new_diff;
1205}
1206
1207static void find_best_clock(u32 rate, u32 *best, u32 *reg)
1208{
1209        u32 a, b, diff = 0xFFFFFFFF;
1210
1211        a = ixp4xx_timer_freq / rate;
1212
1213        if (a > 0x3FF) { /* 10-bit value - we can go as slow as ca. 65 kb/s */
1214                check_clock(rate, 0x3FF, 1, 1, best, &diff, reg);
1215                return;
1216        }
1217        if (a == 0) { /* > 66.666 MHz */
1218                a = 1; /* minimum divider is 1 (a = 0, b = 1, c = 1) */
1219                rate = ixp4xx_timer_freq;
1220        }
1221
1222        if (rate * a == ixp4xx_timer_freq) { /* don't divide by 0 later */
1223                check_clock(rate, a - 1, 1, 1, best, &diff, reg);
1224                return;
1225        }
1226
1227        for (b = 0; b < 0x400; b++) {
1228                u64 c = (b + 1) * (u64)rate;
1229                do_div(c, ixp4xx_timer_freq - rate * a);
1230                c--;
1231                if (c >= 0xFFF) { /* 12-bit - no need to check more 'b's */
1232                        if (b == 0 && /* also try a bit higher rate */
1233                            !check_clock(rate, a - 1, 1, 1, best, &diff, reg))
1234                                return;
1235                        check_clock(rate, a, b, 0xFFF, best, &diff, reg);
1236                        return;
1237                }
1238                if (!check_clock(rate, a, b, c, best, &diff, reg))
1239                        return;
1240                if (!check_clock(rate, a, b, c + 1, best, &diff, reg))
1241                        return;
1242        }
1243}
1244
1245static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1246{
1247        const size_t size = sizeof(sync_serial_settings);
1248        sync_serial_settings new_line;
1249        sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1250        struct port *port = dev_to_port(dev);
1251        unsigned long flags;
1252        int clk;
1253
1254        if (cmd != SIOCWANDEV)
1255                return hdlc_ioctl(dev, ifr, cmd);
1256
1257        switch(ifr->ifr_settings.type) {
1258        case IF_GET_IFACE:
1259                ifr->ifr_settings.type = IF_IFACE_V35;
1260                if (ifr->ifr_settings.size < size) {
1261                        ifr->ifr_settings.size = size; /* data size wanted */
1262                        return -ENOBUFS;
1263                }
1264                memset(&new_line, 0, sizeof(new_line));
1265                new_line.clock_type = port->clock_type;
1266                new_line.clock_rate = port->clock_rate;
1267                new_line.loopback = port->loopback;
1268                if (copy_to_user(line, &new_line, size))
1269                        return -EFAULT;
1270                return 0;
1271
1272        case IF_IFACE_SYNC_SERIAL:
1273        case IF_IFACE_V35:
1274                if(!capable(CAP_NET_ADMIN))
1275                        return -EPERM;
1276                if (copy_from_user(&new_line, line, size))
1277                        return -EFAULT;
1278
1279                clk = new_line.clock_type;
1280                if (port->plat->set_clock)
1281                        clk = port->plat->set_clock(port->id, clk);
1282
1283                if (clk != CLOCK_EXT && clk != CLOCK_INT)
1284                        return -EINVAL; /* No such clock setting */
1285
1286                if (new_line.loopback != 0 && new_line.loopback != 1)
1287                        return -EINVAL;
1288
1289                port->clock_type = clk; /* Update settings */
1290                if (clk == CLOCK_INT)
1291                        find_best_clock(new_line.clock_rate, &port->clock_rate,
1292                                        &port->clock_reg);
1293                else {
1294                        port->clock_rate = 0;
1295                        port->clock_reg = CLK42X_SPEED_2048KHZ;
1296                }
1297                port->loopback = new_line.loopback;
1298
1299                spin_lock_irqsave(&npe_lock, flags);
1300
1301                if (dev->flags & IFF_UP)
1302                        hss_config(port);
1303
1304                if (port->loopback || port->carrier)
1305                        netif_carrier_on(port->netdev);
1306                else
1307                        netif_carrier_off(port->netdev);
1308                spin_unlock_irqrestore(&npe_lock, flags);
1309
1310                return 0;
1311
1312        default:
1313                return hdlc_ioctl(dev, ifr, cmd);
1314        }
1315}
1316
1317/*****************************************************************************
1318 * initialization
1319 ****************************************************************************/
1320
1321static const struct net_device_ops hss_hdlc_ops = {
1322        .ndo_open       = hss_hdlc_open,
1323        .ndo_stop       = hss_hdlc_close,
1324        .ndo_start_xmit = hdlc_start_xmit,
1325        .ndo_do_ioctl   = hss_hdlc_ioctl,
1326};
1327
1328static int hss_init_one(struct platform_device *pdev)
1329{
1330        struct port *port;
1331        struct net_device *dev;
1332        hdlc_device *hdlc;
1333        int err;
1334
1335        if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
1336                return -ENOMEM;
1337
1338        if ((port->npe = npe_request(0)) == NULL) {
1339                err = -ENODEV;
1340                goto err_free;
1341        }
1342
1343        if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
1344                err = -ENOMEM;
1345                goto err_plat;
1346        }
1347
1348        SET_NETDEV_DEV(dev, &pdev->dev);
1349        hdlc = dev_to_hdlc(dev);
1350        hdlc->attach = hss_hdlc_attach;
1351        hdlc->xmit = hss_hdlc_xmit;
1352        dev->netdev_ops = &hss_hdlc_ops;
1353        dev->tx_queue_len = 100;
1354        port->clock_type = CLOCK_EXT;
1355        port->clock_rate = 0;
1356        port->clock_reg = CLK42X_SPEED_2048KHZ;
1357        port->id = pdev->id;
1358        port->dev = &pdev->dev;
1359        port->plat = pdev->dev.platform_data;
1360        netif_napi_add(dev, &port->napi, hss_hdlc_poll, NAPI_WEIGHT);
1361
1362        if ((err = register_hdlc_device(dev)))
1363                goto err_free_netdev;
1364
1365        platform_set_drvdata(pdev, port);
1366
1367        netdev_info(dev, "initialized\n");
1368        return 0;
1369
1370err_free_netdev:
1371        free_netdev(dev);
1372err_plat:
1373        npe_release(port->npe);
1374err_free:
1375        kfree(port);
1376        return err;
1377}
1378
1379static int hss_remove_one(struct platform_device *pdev)
1380{
1381        struct port *port = platform_get_drvdata(pdev);
1382
1383        unregister_hdlc_device(port->netdev);
1384        free_netdev(port->netdev);
1385        npe_release(port->npe);
1386        kfree(port);
1387        return 0;
1388}
1389
1390static struct platform_driver ixp4xx_hss_driver = {
1391        .driver.name    = DRV_NAME,
1392        .probe          = hss_init_one,
1393        .remove         = hss_remove_one,
1394};
1395
1396static int __init hss_init_module(void)
1397{
1398        if ((ixp4xx_read_feature_bits() &
1399             (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
1400            (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
1401                return -ENODEV;
1402
1403        spin_lock_init(&npe_lock);
1404
1405        return platform_driver_register(&ixp4xx_hss_driver);
1406}
1407
1408static void __exit hss_cleanup_module(void)
1409{
1410        platform_driver_unregister(&ixp4xx_hss_driver);
1411}
1412
1413MODULE_AUTHOR("Krzysztof Halasa");
1414MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
1415MODULE_LICENSE("GPL v2");
1416MODULE_ALIAS("platform:ixp4xx_hss");
1417module_init(hss_init_module);
1418module_exit(hss_cleanup_module);
1419