linux/drivers/net/wireless/intersil/p54/p54spi.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
   3 * Copyright 2008       Johannes Berg <johannes@sipsolutions.net>
   4 *
   5 * This driver is a port from stlc45xx:
   6 *      Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
   7 *
   8 * This program is free software; you can redistribute it and/or
   9 * modify it under the terms of the GNU General Public License
  10 * version 2 as published by the Free Software Foundation.
  11 *
  12 * This program is distributed in the hope that it will be useful, but
  13 * WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15 * General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License
  18 * along with this program; if not, write to the Free Software
  19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20 * 02110-1301 USA
  21 */
  22
  23#include <linux/module.h>
  24#include <linux/platform_device.h>
  25#include <linux/interrupt.h>
  26#include <linux/firmware.h>
  27#include <linux/delay.h>
  28#include <linux/irq.h>
  29#include <linux/spi/spi.h>
  30#include <linux/etherdevice.h>
  31#include <linux/gpio.h>
  32#include <linux/slab.h>
  33
  34#include "p54spi.h"
  35#include "p54.h"
  36
  37#include "lmac.h"
  38
  39#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
  40#include "p54spi_eeprom.h"
  41#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
  42
  43MODULE_FIRMWARE("3826.arm");
  44
  45/* gpios should be handled in board files and provided via platform data,
  46 * but because it's currently impossible for p54spi to have a header file
  47 * in include/linux, let's use module paramaters for now
  48 */
  49
  50static int p54spi_gpio_power = 97;
  51module_param(p54spi_gpio_power, int, 0444);
  52MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
  53
  54static int p54spi_gpio_irq = 87;
  55module_param(p54spi_gpio_irq, int, 0444);
  56MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
  57
  58static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
  59                              void *buf, size_t len)
  60{
  61        struct spi_transfer t[2];
  62        struct spi_message m;
  63        __le16 addr;
  64
  65        /* We first push the address */
  66        addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
  67
  68        spi_message_init(&m);
  69        memset(t, 0, sizeof(t));
  70
  71        t[0].tx_buf = &addr;
  72        t[0].len = sizeof(addr);
  73        spi_message_add_tail(&t[0], &m);
  74
  75        t[1].rx_buf = buf;
  76        t[1].len = len;
  77        spi_message_add_tail(&t[1], &m);
  78
  79        spi_sync(priv->spi, &m);
  80}
  81
  82
  83static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
  84                             const void *buf, size_t len)
  85{
  86        struct spi_transfer t[3];
  87        struct spi_message m;
  88        __le16 addr;
  89
  90        /* We first push the address */
  91        addr = cpu_to_le16(address << 8);
  92
  93        spi_message_init(&m);
  94        memset(t, 0, sizeof(t));
  95
  96        t[0].tx_buf = &addr;
  97        t[0].len = sizeof(addr);
  98        spi_message_add_tail(&t[0], &m);
  99
 100        t[1].tx_buf = buf;
 101        t[1].len = len & ~1;
 102        spi_message_add_tail(&t[1], &m);
 103
 104        if (len % 2) {
 105                __le16 last_word;
 106                last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
 107
 108                t[2].tx_buf = &last_word;
 109                t[2].len = sizeof(last_word);
 110                spi_message_add_tail(&t[2], &m);
 111        }
 112
 113        spi_sync(priv->spi, &m);
 114}
 115
 116static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
 117{
 118        __le32 val;
 119
 120        p54spi_spi_read(priv, addr, &val, sizeof(val));
 121
 122        return le32_to_cpu(val);
 123}
 124
 125static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
 126{
 127        p54spi_spi_write(priv, addr, &val, sizeof(val));
 128}
 129
 130static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
 131{
 132        p54spi_spi_write(priv, addr, &val, sizeof(val));
 133}
 134
 135static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
 136{
 137        int i;
 138
 139        for (i = 0; i < 2000; i++) {
 140                u32 buffer = p54spi_read32(priv, reg);
 141                if ((buffer & bits) == bits)
 142                        return 1;
 143        }
 144        return 0;
 145}
 146
 147static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
 148                                const void *buf, size_t len)
 149{
 150        if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
 151                dev_err(&priv->spi->dev, "spi_write_dma not allowed "
 152                        "to DMA write.\n");
 153                return -EAGAIN;
 154        }
 155
 156        p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
 157                       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
 158
 159        p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
 160        p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
 161        p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
 162        return 0;
 163}
 164
 165static int p54spi_request_firmware(struct ieee80211_hw *dev)
 166{
 167        struct p54s_priv *priv = dev->priv;
 168        int ret;
 169
 170        /* FIXME: should driver use it's own struct device? */
 171        ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
 172
 173        if (ret < 0) {
 174                dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
 175                return ret;
 176        }
 177
 178        ret = p54_parse_firmware(dev, priv->firmware);
 179        if (ret) {
 180                release_firmware(priv->firmware);
 181                return ret;
 182        }
 183
 184        return 0;
 185}
 186
 187static int p54spi_request_eeprom(struct ieee80211_hw *dev)
 188{
 189        struct p54s_priv *priv = dev->priv;
 190        const struct firmware *eeprom;
 191        int ret;
 192
 193        /* allow users to customize their eeprom.
 194         */
 195
 196        ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev);
 197        if (ret < 0) {
 198#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
 199                dev_info(&priv->spi->dev, "loading default eeprom...\n");
 200                ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
 201                                       sizeof(p54spi_eeprom));
 202#else
 203                dev_err(&priv->spi->dev, "Failed to request user eeprom\n");
 204#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
 205        } else {
 206                dev_info(&priv->spi->dev, "loading user eeprom...\n");
 207                ret = p54_parse_eeprom(dev, (void *) eeprom->data,
 208                                       (int)eeprom->size);
 209                release_firmware(eeprom);
 210        }
 211        return ret;
 212}
 213
 214static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 215{
 216        struct p54s_priv *priv = dev->priv;
 217        unsigned long fw_len, _fw_len;
 218        unsigned int offset = 0;
 219        int err = 0;
 220        u8 *fw;
 221
 222        fw_len = priv->firmware->size;
 223        fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
 224        if (!fw)
 225                return -ENOMEM;
 226
 227        /* stop the device */
 228        p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 229                       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
 230                       SPI_CTRL_STAT_START_HALTED));
 231
 232        msleep(TARGET_BOOT_SLEEP);
 233
 234        p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 235                       SPI_CTRL_STAT_HOST_OVERRIDE |
 236                       SPI_CTRL_STAT_START_HALTED));
 237
 238        msleep(TARGET_BOOT_SLEEP);
 239
 240        while (fw_len > 0) {
 241                _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
 242
 243                err = p54spi_spi_write_dma(priv, cpu_to_le32(
 244                                           ISL38XX_DEV_FIRMWARE_ADDR + offset),
 245                                           (fw + offset), _fw_len);
 246                if (err < 0)
 247                        goto out;
 248
 249                fw_len -= _fw_len;
 250                offset += _fw_len;
 251        }
 252
 253        BUG_ON(fw_len != 0);
 254
 255        /* enable host interrupts */
 256        p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
 257                       cpu_to_le32(SPI_HOST_INTS_DEFAULT));
 258
 259        /* boot the device */
 260        p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 261                       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
 262                       SPI_CTRL_STAT_RAM_BOOT));
 263
 264        msleep(TARGET_BOOT_SLEEP);
 265
 266        p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 267                       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
 268        msleep(TARGET_BOOT_SLEEP);
 269
 270out:
 271        kfree(fw);
 272        return err;
 273}
 274
 275static void p54spi_power_off(struct p54s_priv *priv)
 276{
 277        disable_irq(gpio_to_irq(p54spi_gpio_irq));
 278        gpio_set_value(p54spi_gpio_power, 0);
 279}
 280
 281static void p54spi_power_on(struct p54s_priv *priv)
 282{
 283        gpio_set_value(p54spi_gpio_power, 1);
 284        enable_irq(gpio_to_irq(p54spi_gpio_irq));
 285
 286        /* need to wait a while before device can be accessed, the length
 287         * is just a guess
 288         */
 289        msleep(10);
 290}
 291
 292static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
 293{
 294        p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
 295}
 296
 297static int p54spi_wakeup(struct p54s_priv *priv)
 298{
 299        /* wake the chip */
 300        p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 301                       cpu_to_le32(SPI_TARGET_INT_WAKEUP));
 302
 303        /* And wait for the READY interrupt */
 304        if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
 305                             SPI_HOST_INT_READY)) {
 306                dev_err(&priv->spi->dev, "INT_READY timeout\n");
 307                return -EBUSY;
 308        }
 309
 310        p54spi_int_ack(priv, SPI_HOST_INT_READY);
 311        return 0;
 312}
 313
 314static inline void p54spi_sleep(struct p54s_priv *priv)
 315{
 316        p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 317                       cpu_to_le32(SPI_TARGET_INT_SLEEP));
 318}
 319
 320static void p54spi_int_ready(struct p54s_priv *priv)
 321{
 322        p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
 323                       SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
 324
 325        switch (priv->fw_state) {
 326        case FW_STATE_BOOTING:
 327                priv->fw_state = FW_STATE_READY;
 328                complete(&priv->fw_comp);
 329                break;
 330        case FW_STATE_RESETTING:
 331                priv->fw_state = FW_STATE_READY;
 332                /* TODO: reinitialize state */
 333                break;
 334        default:
 335                break;
 336        }
 337}
 338
 339static int p54spi_rx(struct p54s_priv *priv)
 340{
 341        struct sk_buff *skb;
 342        u16 len;
 343        u16 rx_head[2];
 344#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
 345
 346        if (p54spi_wakeup(priv) < 0)
 347                return -EBUSY;
 348
 349        /* Read data size and first data word in one SPI transaction
 350         * This is workaround for firmware/DMA bug,
 351         * when first data word gets lost under high load.
 352         */
 353        p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
 354        len = rx_head[0];
 355
 356        if (len == 0) {
 357                p54spi_sleep(priv);
 358                dev_err(&priv->spi->dev, "rx request of zero bytes\n");
 359                return 0;
 360        }
 361
 362        /* Firmware may insert up to 4 padding bytes after the lmac header,
 363         * but it does not amend the size of SPI data transfer.
 364         * Such packets has correct data size in header, thus referencing
 365         * past the end of allocated skb. Reserve extra 4 bytes for this case
 366         */
 367        skb = dev_alloc_skb(len + 4);
 368        if (!skb) {
 369                p54spi_sleep(priv);
 370                dev_err(&priv->spi->dev, "could not alloc skb");
 371                return -ENOMEM;
 372        }
 373
 374        if (len <= READAHEAD_SZ) {
 375                skb_put_data(skb, rx_head + 1, len);
 376        } else {
 377                skb_put_data(skb, rx_head + 1, READAHEAD_SZ);
 378                p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
 379                                skb_put(skb, len - READAHEAD_SZ),
 380                                len - READAHEAD_SZ);
 381        }
 382        p54spi_sleep(priv);
 383        /* Put additional bytes to compensate for the possible
 384         * alignment-caused truncation
 385         */
 386        skb_put(skb, 4);
 387
 388        if (p54_rx(priv->hw, skb) == 0)
 389                dev_kfree_skb(skb);
 390
 391        return 0;
 392}
 393
 394
 395static irqreturn_t p54spi_interrupt(int irq, void *config)
 396{
 397        struct spi_device *spi = config;
 398        struct p54s_priv *priv = spi_get_drvdata(spi);
 399
 400        ieee80211_queue_work(priv->hw, &priv->work);
 401
 402        return IRQ_HANDLED;
 403}
 404
 405static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
 406{
 407        struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 408        int ret = 0;
 409
 410        if (p54spi_wakeup(priv) < 0)
 411                return -EBUSY;
 412
 413        ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
 414        if (ret < 0)
 415                goto out;
 416
 417        if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
 418                             SPI_HOST_INT_WR_READY)) {
 419                dev_err(&priv->spi->dev, "WR_READY timeout\n");
 420                ret = -EAGAIN;
 421                goto out;
 422        }
 423
 424        p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
 425
 426        if (FREE_AFTER_TX(skb))
 427                p54_free_skb(priv->hw, skb);
 428out:
 429        p54spi_sleep(priv);
 430        return ret;
 431}
 432
 433static int p54spi_wq_tx(struct p54s_priv *priv)
 434{
 435        struct p54s_tx_info *entry;
 436        struct sk_buff *skb;
 437        struct ieee80211_tx_info *info;
 438        struct p54_tx_info *minfo;
 439        struct p54s_tx_info *dinfo;
 440        unsigned long flags;
 441        int ret = 0;
 442
 443        spin_lock_irqsave(&priv->tx_lock, flags);
 444
 445        while (!list_empty(&priv->tx_pending)) {
 446                entry = list_entry(priv->tx_pending.next,
 447                                   struct p54s_tx_info, tx_list);
 448
 449                list_del_init(&entry->tx_list);
 450
 451                spin_unlock_irqrestore(&priv->tx_lock, flags);
 452
 453                dinfo = container_of((void *) entry, struct p54s_tx_info,
 454                                     tx_list);
 455                minfo = container_of((void *) dinfo, struct p54_tx_info,
 456                                     data);
 457                info = container_of((void *) minfo, struct ieee80211_tx_info,
 458                                    rate_driver_data);
 459                skb = container_of((void *) info, struct sk_buff, cb);
 460
 461                ret = p54spi_tx_frame(priv, skb);
 462
 463                if (ret < 0) {
 464                        p54_free_skb(priv->hw, skb);
 465                        return ret;
 466                }
 467
 468                spin_lock_irqsave(&priv->tx_lock, flags);
 469        }
 470        spin_unlock_irqrestore(&priv->tx_lock, flags);
 471        return ret;
 472}
 473
 474static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 475{
 476        struct p54s_priv *priv = dev->priv;
 477        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 478        struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
 479        struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
 480        unsigned long flags;
 481
 482        BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
 483
 484        spin_lock_irqsave(&priv->tx_lock, flags);
 485        list_add_tail(&di->tx_list, &priv->tx_pending);
 486        spin_unlock_irqrestore(&priv->tx_lock, flags);
 487
 488        ieee80211_queue_work(priv->hw, &priv->work);
 489}
 490
 491static void p54spi_work(struct work_struct *work)
 492{
 493        struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
 494        u32 ints;
 495        int ret;
 496
 497        mutex_lock(&priv->mutex);
 498
 499        if (priv->fw_state == FW_STATE_OFF)
 500                goto out;
 501
 502        ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
 503
 504        if (ints & SPI_HOST_INT_READY) {
 505                p54spi_int_ready(priv);
 506                p54spi_int_ack(priv, SPI_HOST_INT_READY);
 507        }
 508
 509        if (priv->fw_state != FW_STATE_READY)
 510                goto out;
 511
 512        if (ints & SPI_HOST_INT_UPDATE) {
 513                p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
 514                ret = p54spi_rx(priv);
 515                if (ret < 0)
 516                        goto out;
 517        }
 518        if (ints & SPI_HOST_INT_SW_UPDATE) {
 519                p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
 520                ret = p54spi_rx(priv);
 521                if (ret < 0)
 522                        goto out;
 523        }
 524
 525        ret = p54spi_wq_tx(priv);
 526out:
 527        mutex_unlock(&priv->mutex);
 528}
 529
 530static int p54spi_op_start(struct ieee80211_hw *dev)
 531{
 532        struct p54s_priv *priv = dev->priv;
 533        unsigned long timeout;
 534        int ret = 0;
 535
 536        if (mutex_lock_interruptible(&priv->mutex)) {
 537                ret = -EINTR;
 538                goto out;
 539        }
 540
 541        priv->fw_state = FW_STATE_BOOTING;
 542
 543        p54spi_power_on(priv);
 544
 545        ret = p54spi_upload_firmware(dev);
 546        if (ret < 0) {
 547                p54spi_power_off(priv);
 548                goto out_unlock;
 549        }
 550
 551        mutex_unlock(&priv->mutex);
 552
 553        timeout = msecs_to_jiffies(2000);
 554        timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
 555                                                            timeout);
 556        if (!timeout) {
 557                dev_err(&priv->spi->dev, "firmware boot failed");
 558                p54spi_power_off(priv);
 559                ret = -1;
 560                goto out;
 561        }
 562
 563        if (mutex_lock_interruptible(&priv->mutex)) {
 564                ret = -EINTR;
 565                p54spi_power_off(priv);
 566                goto out;
 567        }
 568
 569        WARN_ON(priv->fw_state != FW_STATE_READY);
 570
 571out_unlock:
 572        mutex_unlock(&priv->mutex);
 573
 574out:
 575        return ret;
 576}
 577
 578static void p54spi_op_stop(struct ieee80211_hw *dev)
 579{
 580        struct p54s_priv *priv = dev->priv;
 581        unsigned long flags;
 582
 583        mutex_lock(&priv->mutex);
 584        WARN_ON(priv->fw_state != FW_STATE_READY);
 585
 586        p54spi_power_off(priv);
 587        spin_lock_irqsave(&priv->tx_lock, flags);
 588        INIT_LIST_HEAD(&priv->tx_pending);
 589        spin_unlock_irqrestore(&priv->tx_lock, flags);
 590
 591        priv->fw_state = FW_STATE_OFF;
 592        mutex_unlock(&priv->mutex);
 593
 594        cancel_work_sync(&priv->work);
 595}
 596
 597static int p54spi_probe(struct spi_device *spi)
 598{
 599        struct p54s_priv *priv = NULL;
 600        struct ieee80211_hw *hw;
 601        int ret = -EINVAL;
 602
 603        hw = p54_init_common(sizeof(*priv));
 604        if (!hw) {
 605                dev_err(&spi->dev, "could not alloc ieee80211_hw");
 606                return -ENOMEM;
 607        }
 608
 609        priv = hw->priv;
 610        priv->hw = hw;
 611        spi_set_drvdata(spi, priv);
 612        priv->spi = spi;
 613
 614        spi->bits_per_word = 16;
 615        spi->max_speed_hz = 24000000;
 616
 617        ret = spi_setup(spi);
 618        if (ret < 0) {
 619                dev_err(&priv->spi->dev, "spi_setup failed");
 620                goto err_free;
 621        }
 622
 623        ret = gpio_request(p54spi_gpio_power, "p54spi power");
 624        if (ret < 0) {
 625                dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
 626                goto err_free;
 627        }
 628
 629        ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
 630        if (ret < 0) {
 631                dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
 632                goto err_free_gpio_power;
 633        }
 634
 635        gpio_direction_output(p54spi_gpio_power, 0);
 636        gpio_direction_input(p54spi_gpio_irq);
 637
 638        ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
 639                          p54spi_interrupt, 0, "p54spi",
 640                          priv->spi);
 641        if (ret < 0) {
 642                dev_err(&priv->spi->dev, "request_irq() failed");
 643                goto err_free_gpio_irq;
 644        }
 645
 646        irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
 647
 648        disable_irq(gpio_to_irq(p54spi_gpio_irq));
 649
 650        INIT_WORK(&priv->work, p54spi_work);
 651        init_completion(&priv->fw_comp);
 652        INIT_LIST_HEAD(&priv->tx_pending);
 653        mutex_init(&priv->mutex);
 654        spin_lock_init(&priv->tx_lock);
 655        SET_IEEE80211_DEV(hw, &spi->dev);
 656        priv->common.open = p54spi_op_start;
 657        priv->common.stop = p54spi_op_stop;
 658        priv->common.tx = p54spi_op_tx;
 659
 660        ret = p54spi_request_firmware(hw);
 661        if (ret < 0)
 662                goto err_free_common;
 663
 664        ret = p54spi_request_eeprom(hw);
 665        if (ret)
 666                goto err_free_common;
 667
 668        ret = p54_register_common(hw, &priv->spi->dev);
 669        if (ret)
 670                goto err_free_common;
 671
 672        return 0;
 673
 674err_free_common:
 675        free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
 676err_free_gpio_irq:
 677        gpio_free(p54spi_gpio_irq);
 678err_free_gpio_power:
 679        gpio_free(p54spi_gpio_power);
 680err_free:
 681        p54_free_common(priv->hw);
 682        return ret;
 683}
 684
 685static int p54spi_remove(struct spi_device *spi)
 686{
 687        struct p54s_priv *priv = spi_get_drvdata(spi);
 688
 689        p54_unregister_common(priv->hw);
 690
 691        free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
 692
 693        gpio_free(p54spi_gpio_power);
 694        gpio_free(p54spi_gpio_irq);
 695        release_firmware(priv->firmware);
 696
 697        mutex_destroy(&priv->mutex);
 698
 699        p54_free_common(priv->hw);
 700
 701        return 0;
 702}
 703
 704
 705static struct spi_driver p54spi_driver = {
 706        .driver = {
 707                .name           = "p54spi",
 708        },
 709
 710        .probe          = p54spi_probe,
 711        .remove         = p54spi_remove,
 712};
 713
 714module_spi_driver(p54spi_driver);
 715
 716MODULE_LICENSE("GPL");
 717MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
 718MODULE_ALIAS("spi:cx3110x");
 719MODULE_ALIAS("spi:p54spi");
 720MODULE_ALIAS("spi:stlc45xx");
 721