linux/drivers/net/wireless/ti/wl1251/main.c
<<
>>
Prefs
   1/*
   2 * This file is part of wl1251
   3 *
   4 * Copyright (C) 2008-2009 Nokia Corporation
   5 *
   6 * This program is free software; you can redistribute it and/or
   7 * modify it under the terms of the GNU General Public License
   8 * version 2 as published by the Free Software Foundation.
   9 *
  10 * This program is distributed in the hope that it will be useful, but
  11 * WITHOUT ANY WARRANTY; without even the implied warranty of
  12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  13 * General Public License for more details.
  14 *
  15 * You should have received a copy of the GNU General Public License
  16 * along with this program; if not, write to the Free Software
  17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  18 * 02110-1301 USA
  19 *
  20 */
  21
  22#include <linux/module.h>
  23#include <linux/interrupt.h>
  24#include <linux/firmware.h>
  25#include <linux/delay.h>
  26#include <linux/irq.h>
  27#include <linux/crc32.h>
  28#include <linux/etherdevice.h>
  29#include <linux/vmalloc.h>
  30#include <linux/slab.h>
  31#include <linux/netdevice.h>
  32
  33#include "wl1251.h"
  34#include "wl12xx_80211.h"
  35#include "reg.h"
  36#include "io.h"
  37#include "cmd.h"
  38#include "event.h"
  39#include "tx.h"
  40#include "rx.h"
  41#include "ps.h"
  42#include "init.h"
  43#include "debugfs.h"
  44#include "boot.h"
  45
  46void wl1251_enable_interrupts(struct wl1251 *wl)
  47{
  48        wl->if_ops->enable_irq(wl);
  49}
  50
  51void wl1251_disable_interrupts(struct wl1251 *wl)
  52{
  53        wl->if_ops->disable_irq(wl);
  54}
  55
  56static int wl1251_power_off(struct wl1251 *wl)
  57{
  58        return wl->if_ops->power(wl, false);
  59}
  60
  61static int wl1251_power_on(struct wl1251 *wl)
  62{
  63        return wl->if_ops->power(wl, true);
  64}
  65
  66static int wl1251_fetch_firmware(struct wl1251 *wl)
  67{
  68        const struct firmware *fw;
  69        struct device *dev = wiphy_dev(wl->hw->wiphy);
  70        int ret;
  71
  72        ret = request_firmware(&fw, WL1251_FW_NAME, dev);
  73
  74        if (ret < 0) {
  75                wl1251_error("could not get firmware: %d", ret);
  76                return ret;
  77        }
  78
  79        if (fw->size % 4) {
  80                wl1251_error("firmware size is not multiple of 32 bits: %zu",
  81                             fw->size);
  82                ret = -EILSEQ;
  83                goto out;
  84        }
  85
  86        wl->fw_len = fw->size;
  87        wl->fw = vmalloc(wl->fw_len);
  88
  89        if (!wl->fw) {
  90                wl1251_error("could not allocate memory for the firmware");
  91                ret = -ENOMEM;
  92                goto out;
  93        }
  94
  95        memcpy(wl->fw, fw->data, wl->fw_len);
  96
  97        ret = 0;
  98
  99out:
 100        release_firmware(fw);
 101
 102        return ret;
 103}
 104
 105static int wl1251_fetch_nvs(struct wl1251 *wl)
 106{
 107        const struct firmware *fw;
 108        struct device *dev = wiphy_dev(wl->hw->wiphy);
 109        int ret;
 110
 111        ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
 112
 113        if (ret < 0) {
 114                wl1251_error("could not get nvs file: %d", ret);
 115                return ret;
 116        }
 117
 118        if (fw->size % 4) {
 119                wl1251_error("nvs size is not multiple of 32 bits: %zu",
 120                             fw->size);
 121                ret = -EILSEQ;
 122                goto out;
 123        }
 124
 125        wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL);
 126
 127        if (!wl->nvs) {
 128                wl1251_error("could not allocate memory for the nvs file");
 129                ret = -ENOMEM;
 130                goto out;
 131        }
 132
 133        wl->nvs_len = fw->size;
 134
 135        ret = 0;
 136
 137out:
 138        release_firmware(fw);
 139
 140        return ret;
 141}
 142
 143static void wl1251_fw_wakeup(struct wl1251 *wl)
 144{
 145        u32 elp_reg;
 146
 147        elp_reg = ELPCTRL_WAKE_UP;
 148        wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
 149        elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
 150
 151        if (!(elp_reg & ELPCTRL_WLAN_READY))
 152                wl1251_warning("WLAN not ready");
 153}
 154
 155static int wl1251_chip_wakeup(struct wl1251 *wl)
 156{
 157        int ret;
 158
 159        ret = wl1251_power_on(wl);
 160        if (ret < 0)
 161                return ret;
 162
 163        msleep(WL1251_POWER_ON_SLEEP);
 164        wl->if_ops->reset(wl);
 165
 166        /* We don't need a real memory partition here, because we only want
 167         * to use the registers at this point. */
 168        wl1251_set_partition(wl,
 169                             0x00000000,
 170                             0x00000000,
 171                             REGISTERS_BASE,
 172                             REGISTERS_DOWN_SIZE);
 173
 174        /* ELP module wake up */
 175        wl1251_fw_wakeup(wl);
 176
 177        /* whal_FwCtrl_BootSm() */
 178
 179        /* 0. read chip id from CHIP_ID */
 180        wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
 181
 182        /* 1. check if chip id is valid */
 183
 184        switch (wl->chip_id) {
 185        case CHIP_ID_1251_PG12:
 186                wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
 187                             wl->chip_id);
 188                break;
 189        case CHIP_ID_1251_PG11:
 190                wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)",
 191                             wl->chip_id);
 192                break;
 193        case CHIP_ID_1251_PG10:
 194        default:
 195                wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
 196                ret = -ENODEV;
 197                goto out;
 198        }
 199
 200        if (wl->fw == NULL) {
 201                ret = wl1251_fetch_firmware(wl);
 202                if (ret < 0)
 203                        goto out;
 204        }
 205
 206out:
 207        return ret;
 208}
 209
 210#define WL1251_IRQ_LOOP_COUNT 10
 211static void wl1251_irq_work(struct work_struct *work)
 212{
 213        u32 intr, ctr = WL1251_IRQ_LOOP_COUNT;
 214        struct wl1251 *wl =
 215                container_of(work, struct wl1251, irq_work);
 216        int ret;
 217
 218        mutex_lock(&wl->mutex);
 219
 220        wl1251_debug(DEBUG_IRQ, "IRQ work");
 221
 222        if (wl->state == WL1251_STATE_OFF)
 223                goto out;
 224
 225        ret = wl1251_ps_elp_wakeup(wl);
 226        if (ret < 0)
 227                goto out;
 228
 229        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
 230
 231        intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
 232        wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);
 233
 234        do {
 235                if (wl->data_path) {
 236                        wl->rx_counter = wl1251_mem_read32(
 237                                wl, wl->data_path->rx_control_addr);
 238
 239                        /* We handle a frmware bug here */
 240                        switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
 241                        case 0:
 242                                wl1251_debug(DEBUG_IRQ,
 243                                             "RX: FW and host in sync");
 244                                intr &= ~WL1251_ACX_INTR_RX0_DATA;
 245                                intr &= ~WL1251_ACX_INTR_RX1_DATA;
 246                                break;
 247                        case 1:
 248                                wl1251_debug(DEBUG_IRQ, "RX: FW +1");
 249                                intr |= WL1251_ACX_INTR_RX0_DATA;
 250                                intr &= ~WL1251_ACX_INTR_RX1_DATA;
 251                                break;
 252                        case 2:
 253                                wl1251_debug(DEBUG_IRQ, "RX: FW +2");
 254                                intr |= WL1251_ACX_INTR_RX0_DATA;
 255                                intr |= WL1251_ACX_INTR_RX1_DATA;
 256                                break;
 257                        default:
 258                                wl1251_warning(
 259                                        "RX: FW and host out of sync: %d",
 260                                        wl->rx_counter - wl->rx_handled);
 261                                break;
 262                        }
 263
 264                        wl->rx_handled = wl->rx_counter;
 265
 266                        wl1251_debug(DEBUG_IRQ, "RX counter: %d",
 267                                     wl->rx_counter);
 268                }
 269
 270                intr &= wl->intr_mask;
 271
 272                if (intr == 0) {
 273                        wl1251_debug(DEBUG_IRQ, "INTR is 0");
 274                        goto out_sleep;
 275                }
 276
 277                if (intr & WL1251_ACX_INTR_RX0_DATA) {
 278                        wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
 279                        wl1251_rx(wl);
 280                }
 281
 282                if (intr & WL1251_ACX_INTR_RX1_DATA) {
 283                        wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
 284                        wl1251_rx(wl);
 285                }
 286
 287                if (intr & WL1251_ACX_INTR_TX_RESULT) {
 288                        wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
 289                        wl1251_tx_complete(wl);
 290                }
 291
 292                if (intr & WL1251_ACX_INTR_EVENT_A) {
 293                        wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_A");
 294                        wl1251_event_handle(wl, 0);
 295                }
 296
 297                if (intr & WL1251_ACX_INTR_EVENT_B) {
 298                        wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_B");
 299                        wl1251_event_handle(wl, 1);
 300                }
 301
 302                if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
 303                        wl1251_debug(DEBUG_IRQ,
 304                                     "WL1251_ACX_INTR_INIT_COMPLETE");
 305
 306                if (--ctr == 0)
 307                        break;
 308
 309                intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
 310        } while (intr);
 311
 312out_sleep:
 313        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
 314        wl1251_ps_elp_sleep(wl);
 315
 316out:
 317        mutex_unlock(&wl->mutex);
 318}
 319
 320static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 321                       u16 beacon_interval, u8 dtim_period)
 322{
 323        int ret;
 324
 325        ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
 326                                     DEFAULT_HW_GEN_MODULATION_TYPE,
 327                                     wl->tx_mgmt_frm_rate,
 328                                     wl->tx_mgmt_frm_mod);
 329        if (ret < 0)
 330                goto out;
 331
 332        /*
 333         * Join command applies filters, and if we are not associated,
 334         * BSSID filter must be disabled for association to work.
 335         */
 336        if (is_zero_ether_addr(wl->bssid))
 337                wl->rx_config &= ~CFG_BSSID_FILTER_EN;
 338
 339        ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
 340                              dtim_period);
 341        if (ret < 0)
 342                goto out;
 343
 344        ret = wl1251_event_wait(wl, JOIN_EVENT_COMPLETE_ID, 100);
 345        if (ret < 0)
 346                wl1251_warning("join timeout");
 347
 348out:
 349        return ret;
 350}
 351
 352static void wl1251_op_tx(struct ieee80211_hw *hw,
 353                         struct ieee80211_tx_control *control,
 354                         struct sk_buff *skb)
 355{
 356        struct wl1251 *wl = hw->priv;
 357        unsigned long flags;
 358
 359        skb_queue_tail(&wl->tx_queue, skb);
 360
 361        /*
 362         * The chip specific setup must run before the first TX packet -
 363         * before that, the tx_work will not be initialized!
 364         */
 365
 366        ieee80211_queue_work(wl->hw, &wl->tx_work);
 367
 368        /*
 369         * The workqueue is slow to process the tx_queue and we need stop
 370         * the queue here, otherwise the queue will get too long.
 371         */
 372        if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_HIGH_WATERMARK) {
 373                wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues");
 374
 375                spin_lock_irqsave(&wl->wl_lock, flags);
 376                ieee80211_stop_queues(wl->hw);
 377                wl->tx_queue_stopped = true;
 378                spin_unlock_irqrestore(&wl->wl_lock, flags);
 379        }
 380}
 381
 382static int wl1251_op_start(struct ieee80211_hw *hw)
 383{
 384        struct wl1251 *wl = hw->priv;
 385        struct wiphy *wiphy = hw->wiphy;
 386        int ret = 0;
 387
 388        wl1251_debug(DEBUG_MAC80211, "mac80211 start");
 389
 390        mutex_lock(&wl->mutex);
 391
 392        if (wl->state != WL1251_STATE_OFF) {
 393                wl1251_error("cannot start because not in off state: %d",
 394                             wl->state);
 395                ret = -EBUSY;
 396                goto out;
 397        }
 398
 399        ret = wl1251_chip_wakeup(wl);
 400        if (ret < 0)
 401                goto out;
 402
 403        ret = wl1251_boot(wl);
 404        if (ret < 0)
 405                goto out;
 406
 407        ret = wl1251_hw_init(wl);
 408        if (ret < 0)
 409                goto out;
 410
 411        ret = wl1251_acx_station_id(wl);
 412        if (ret < 0)
 413                goto out;
 414
 415        wl->state = WL1251_STATE_ON;
 416
 417        wl1251_info("firmware booted (%s)", wl->fw_ver);
 418
 419        /* update hw/fw version info in wiphy struct */
 420        wiphy->hw_version = wl->chip_id;
 421        strncpy(wiphy->fw_version, wl->fw_ver, sizeof(wiphy->fw_version));
 422
 423out:
 424        if (ret < 0)
 425                wl1251_power_off(wl);
 426
 427        mutex_unlock(&wl->mutex);
 428
 429        return ret;
 430}
 431
 432static void wl1251_op_stop(struct ieee80211_hw *hw)
 433{
 434        struct wl1251 *wl = hw->priv;
 435
 436        wl1251_info("down");
 437
 438        wl1251_debug(DEBUG_MAC80211, "mac80211 stop");
 439
 440        mutex_lock(&wl->mutex);
 441
 442        WARN_ON(wl->state != WL1251_STATE_ON);
 443
 444        if (wl->scanning) {
 445                struct cfg80211_scan_info info = {
 446                        .aborted = true,
 447                };
 448
 449                ieee80211_scan_completed(wl->hw, &info);
 450                wl->scanning = false;
 451        }
 452
 453        wl->state = WL1251_STATE_OFF;
 454
 455        wl1251_disable_interrupts(wl);
 456
 457        mutex_unlock(&wl->mutex);
 458
 459        cancel_work_sync(&wl->irq_work);
 460        cancel_work_sync(&wl->tx_work);
 461        cancel_delayed_work_sync(&wl->elp_work);
 462
 463        mutex_lock(&wl->mutex);
 464
 465        /* let's notify MAC80211 about the remaining pending TX frames */
 466        wl1251_tx_flush(wl);
 467        wl1251_power_off(wl);
 468
 469        eth_zero_addr(wl->bssid);
 470        wl->listen_int = 1;
 471        wl->bss_type = MAX_BSS_TYPE;
 472
 473        wl->data_in_count = 0;
 474        wl->rx_counter = 0;
 475        wl->rx_handled = 0;
 476        wl->rx_current_buffer = 0;
 477        wl->rx_last_id = 0;
 478        wl->next_tx_complete = 0;
 479        wl->elp = false;
 480        wl->station_mode = STATION_ACTIVE_MODE;
 481        wl->psm_entry_retry = 0;
 482        wl->tx_queue_stopped = false;
 483        wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
 484        wl->rssi_thold = 0;
 485        wl->channel = WL1251_DEFAULT_CHANNEL;
 486        wl->monitor_present = false;
 487        wl->joined = false;
 488
 489        wl1251_debugfs_reset(wl);
 490
 491        mutex_unlock(&wl->mutex);
 492}
 493
 494static int wl1251_op_add_interface(struct ieee80211_hw *hw,
 495                                   struct ieee80211_vif *vif)
 496{
 497        struct wl1251 *wl = hw->priv;
 498        int ret = 0;
 499
 500        vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
 501                             IEEE80211_VIF_SUPPORTS_UAPSD |
 502                             IEEE80211_VIF_SUPPORTS_CQM_RSSI;
 503
 504        wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
 505                     vif->type, vif->addr);
 506
 507        mutex_lock(&wl->mutex);
 508        if (wl->vif) {
 509                ret = -EBUSY;
 510                goto out;
 511        }
 512
 513        wl->vif = vif;
 514
 515        switch (vif->type) {
 516        case NL80211_IFTYPE_STATION:
 517                wl->bss_type = BSS_TYPE_STA_BSS;
 518                break;
 519        case NL80211_IFTYPE_ADHOC:
 520                wl->bss_type = BSS_TYPE_IBSS;
 521                break;
 522        default:
 523                ret = -EOPNOTSUPP;
 524                goto out;
 525        }
 526
 527        if (!ether_addr_equal_unaligned(wl->mac_addr, vif->addr)) {
 528                memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
 529                SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
 530                ret = wl1251_acx_station_id(wl);
 531                if (ret < 0)
 532                        goto out;
 533        }
 534
 535out:
 536        mutex_unlock(&wl->mutex);
 537        return ret;
 538}
 539
 540static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
 541                                         struct ieee80211_vif *vif)
 542{
 543        struct wl1251 *wl = hw->priv;
 544
 545        mutex_lock(&wl->mutex);
 546        wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
 547        wl->vif = NULL;
 548        eth_zero_addr(wl->bssid);
 549        mutex_unlock(&wl->mutex);
 550}
 551
 552static int wl1251_build_null_data(struct wl1251 *wl)
 553{
 554        struct sk_buff *skb = NULL;
 555        int size;
 556        void *ptr;
 557        int ret = -ENOMEM;
 558
 559        if (wl->bss_type == BSS_TYPE_IBSS) {
 560                size = sizeof(struct wl12xx_null_data_template);
 561                ptr = NULL;
 562        } else {
 563                skb = ieee80211_nullfunc_get(wl->hw, wl->vif, false);
 564                if (!skb)
 565                        goto out;
 566                size = skb->len;
 567                ptr = skb->data;
 568        }
 569
 570        ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, ptr, size);
 571
 572out:
 573        dev_kfree_skb(skb);
 574        if (ret)
 575                wl1251_warning("cmd buld null data failed: %d", ret);
 576
 577        return ret;
 578}
 579
 580static int wl1251_build_qos_null_data(struct wl1251 *wl)
 581{
 582        struct ieee80211_qos_hdr template;
 583
 584        memset(&template, 0, sizeof(template));
 585
 586        memcpy(template.addr1, wl->bssid, ETH_ALEN);
 587        memcpy(template.addr2, wl->mac_addr, ETH_ALEN);
 588        memcpy(template.addr3, wl->bssid, ETH_ALEN);
 589
 590        template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
 591                                             IEEE80211_STYPE_QOS_NULLFUNC |
 592                                             IEEE80211_FCTL_TODS);
 593
 594        /* FIXME: not sure what priority to use here */
 595        template.qos_ctrl = cpu_to_le16(0);
 596
 597        return wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, &template,
 598                                       sizeof(template));
 599}
 600
 601static bool wl1251_can_do_pm(struct ieee80211_conf *conf, struct wl1251 *wl)
 602{
 603        return (conf->flags & IEEE80211_CONF_PS) && !wl->monitor_present;
 604}
 605
 606static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 607{
 608        struct wl1251 *wl = hw->priv;
 609        struct ieee80211_conf *conf = &hw->conf;
 610        int channel, ret = 0;
 611
 612        channel = ieee80211_frequency_to_channel(
 613                        conf->chandef.chan->center_freq);
 614
 615        wl1251_debug(DEBUG_MAC80211,
 616                     "mac80211 config ch %d monitor %s psm %s power %d",
 617                     channel,
 618                     conf->flags & IEEE80211_CONF_MONITOR ? "on" : "off",
 619                     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
 620                     conf->power_level);
 621
 622        mutex_lock(&wl->mutex);
 623
 624        ret = wl1251_ps_elp_wakeup(wl);
 625        if (ret < 0)
 626                goto out;
 627
 628        if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
 629                u32 mode;
 630
 631                if (conf->flags & IEEE80211_CONF_MONITOR) {
 632                        wl->monitor_present = true;
 633                        mode = DF_SNIFF_MODE_ENABLE | DF_ENCRYPTION_DISABLE;
 634                } else {
 635                        wl->monitor_present = false;
 636                        mode = 0;
 637                }
 638
 639                ret = wl1251_acx_feature_cfg(wl, mode);
 640                if (ret < 0)
 641                        goto out_sleep;
 642        }
 643
 644        if (channel != wl->channel) {
 645                wl->channel = channel;
 646
 647                /*
 648                 * Use ENABLE_RX command for channel switching when no
 649                 * interface is present (monitor mode only).
 650                 * This leaves the tx path disabled in firmware, whereas
 651                 * the usual JOIN command seems to transmit some frames
 652                 * at firmware level.
 653                 */
 654                if (wl->vif == NULL) {
 655                        wl->joined = false;
 656                        ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1);
 657                } else {
 658                        ret = wl1251_join(wl, wl->bss_type, wl->channel,
 659                                          wl->beacon_int, wl->dtim_period);
 660                }
 661                if (ret < 0)
 662                        goto out_sleep;
 663        }
 664
 665        if (wl1251_can_do_pm(conf, wl) && !wl->psm_requested) {
 666                wl1251_debug(DEBUG_PSM, "psm enabled");
 667
 668                wl->psm_requested = true;
 669
 670                wl->dtim_period = conf->ps_dtim_period;
 671
 672                ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
 673                                                  wl->dtim_period);
 674
 675                /*
 676                 * mac80211 enables PSM only if we're already associated.
 677                 */
 678                ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
 679                if (ret < 0)
 680                        goto out_sleep;
 681        } else if (!wl1251_can_do_pm(conf, wl) && wl->psm_requested) {
 682                wl1251_debug(DEBUG_PSM, "psm disabled");
 683
 684                wl->psm_requested = false;
 685
 686                if (wl->station_mode != STATION_ACTIVE_MODE) {
 687                        ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
 688                        if (ret < 0)
 689                                goto out_sleep;
 690                }
 691        }
 692
 693        if (changed & IEEE80211_CONF_CHANGE_IDLE && !wl->scanning) {
 694                if (conf->flags & IEEE80211_CONF_IDLE) {
 695                        ret = wl1251_ps_set_mode(wl, STATION_IDLE);
 696                        if (ret < 0)
 697                                goto out_sleep;
 698                } else {
 699                        ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
 700                        if (ret < 0)
 701                                goto out_sleep;
 702                        ret = wl1251_join(wl, wl->bss_type, wl->channel,
 703                                          wl->beacon_int, wl->dtim_period);
 704                        if (ret < 0)
 705                                goto out_sleep;
 706                }
 707        }
 708
 709        if (conf->power_level != wl->power_level) {
 710                ret = wl1251_acx_tx_power(wl, conf->power_level);
 711                if (ret < 0)
 712                        goto out_sleep;
 713
 714                wl->power_level = conf->power_level;
 715        }
 716
 717out_sleep:
 718        wl1251_ps_elp_sleep(wl);
 719
 720out:
 721        mutex_unlock(&wl->mutex);
 722
 723        return ret;
 724}
 725
 726struct wl1251_filter_params {
 727        bool enabled;
 728        int mc_list_length;
 729        u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN];
 730};
 731
 732static u64 wl1251_op_prepare_multicast(struct ieee80211_hw *hw,
 733                                       struct netdev_hw_addr_list *mc_list)
 734{
 735        struct wl1251_filter_params *fp;
 736        struct netdev_hw_addr *ha;
 737        struct wl1251 *wl = hw->priv;
 738
 739        if (unlikely(wl->state == WL1251_STATE_OFF))
 740                return 0;
 741
 742        fp = kzalloc(sizeof(*fp), GFP_ATOMIC);
 743        if (!fp) {
 744                wl1251_error("Out of memory setting filters.");
 745                return 0;
 746        }
 747
 748        /* update multicast filtering parameters */
 749        fp->mc_list_length = 0;
 750        if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) {
 751                fp->enabled = false;
 752        } else {
 753                fp->enabled = true;
 754                netdev_hw_addr_list_for_each(ha, mc_list) {
 755                        memcpy(fp->mc_list[fp->mc_list_length],
 756                                        ha->addr, ETH_ALEN);
 757                        fp->mc_list_length++;
 758                }
 759        }
 760
 761        return (u64)(unsigned long)fp;
 762}
 763
 764#define WL1251_SUPPORTED_FILTERS (FIF_ALLMULTI | \
 765                                  FIF_FCSFAIL | \
 766                                  FIF_BCN_PRBRESP_PROMISC | \
 767                                  FIF_CONTROL | \
 768                                  FIF_OTHER_BSS | \
 769                                  FIF_PROBE_REQ)
 770
 771static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 772                                       unsigned int changed,
 773                                       unsigned int *total, u64 multicast)
 774{
 775        struct wl1251_filter_params *fp = (void *)(unsigned long)multicast;
 776        struct wl1251 *wl = hw->priv;
 777        int ret;
 778
 779        wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
 780
 781        *total &= WL1251_SUPPORTED_FILTERS;
 782        changed &= WL1251_SUPPORTED_FILTERS;
 783
 784        if (changed == 0) {
 785                /* no filters which we support changed */
 786                kfree(fp);
 787                return;
 788        }
 789
 790        mutex_lock(&wl->mutex);
 791
 792        wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
 793        wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
 794
 795        if (*total & FIF_ALLMULTI)
 796                /*
 797                 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
 798                 * all multicast frames
 799                 */
 800                wl->rx_config &= ~CFG_MC_FILTER_EN;
 801        if (*total & FIF_FCSFAIL)
 802                wl->rx_filter |= CFG_RX_FCS_ERROR;
 803        if (*total & FIF_BCN_PRBRESP_PROMISC) {
 804                wl->rx_config &= ~CFG_BSSID_FILTER_EN;
 805                wl->rx_config &= ~CFG_SSID_FILTER_EN;
 806        }
 807        if (*total & FIF_CONTROL)
 808                wl->rx_filter |= CFG_RX_CTL_EN;
 809        if (*total & FIF_OTHER_BSS || is_zero_ether_addr(wl->bssid))
 810                wl->rx_config &= ~CFG_BSSID_FILTER_EN;
 811        if (*total & FIF_PROBE_REQ)
 812                wl->rx_filter |= CFG_RX_PREQ_EN;
 813
 814        if (wl->state == WL1251_STATE_OFF)
 815                goto out;
 816
 817        ret = wl1251_ps_elp_wakeup(wl);
 818        if (ret < 0)
 819                goto out;
 820
 821        if (*total & FIF_ALLMULTI)
 822                ret = wl1251_acx_group_address_tbl(wl, false, NULL, 0);
 823        else if (fp)
 824                ret = wl1251_acx_group_address_tbl(wl, fp->enabled,
 825                                                   fp->mc_list,
 826                                                   fp->mc_list_length);
 827        if (ret < 0)
 828                goto out;
 829
 830        /* send filters to firmware */
 831        wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
 832
 833        wl1251_ps_elp_sleep(wl);
 834
 835out:
 836        mutex_unlock(&wl->mutex);
 837        kfree(fp);
 838}
 839
 840/* HW encryption */
 841static int wl1251_set_key_type(struct wl1251 *wl,
 842                               struct wl1251_cmd_set_keys *key,
 843                               enum set_key_cmd cmd,
 844                               struct ieee80211_key_conf *mac80211_key,
 845                               const u8 *addr)
 846{
 847        switch (mac80211_key->cipher) {
 848        case WLAN_CIPHER_SUITE_WEP40:
 849        case WLAN_CIPHER_SUITE_WEP104:
 850                if (is_broadcast_ether_addr(addr))
 851                        key->key_type = KEY_WEP_DEFAULT;
 852                else
 853                        key->key_type = KEY_WEP_ADDR;
 854
 855                mac80211_key->hw_key_idx = mac80211_key->keyidx;
 856                break;
 857        case WLAN_CIPHER_SUITE_TKIP:
 858                if (is_broadcast_ether_addr(addr))
 859                        key->key_type = KEY_TKIP_MIC_GROUP;
 860                else
 861                        key->key_type = KEY_TKIP_MIC_PAIRWISE;
 862
 863                mac80211_key->hw_key_idx = mac80211_key->keyidx;
 864                break;
 865        case WLAN_CIPHER_SUITE_CCMP:
 866                if (is_broadcast_ether_addr(addr))
 867                        key->key_type = KEY_AES_GROUP;
 868                else
 869                        key->key_type = KEY_AES_PAIRWISE;
 870                mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 871                break;
 872        default:
 873                wl1251_error("Unknown key cipher 0x%x", mac80211_key->cipher);
 874                return -EOPNOTSUPP;
 875        }
 876
 877        return 0;
 878}
 879
 880static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 881                             struct ieee80211_vif *vif,
 882                             struct ieee80211_sta *sta,
 883                             struct ieee80211_key_conf *key)
 884{
 885        struct wl1251 *wl = hw->priv;
 886        struct wl1251_cmd_set_keys *wl_cmd;
 887        const u8 *addr;
 888        int ret;
 889
 890        static const u8 bcast_addr[ETH_ALEN] =
 891                { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 892
 893        wl1251_debug(DEBUG_MAC80211, "mac80211 set key");
 894
 895        wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL);
 896        if (!wl_cmd) {
 897                ret = -ENOMEM;
 898                goto out;
 899        }
 900
 901        addr = sta ? sta->addr : bcast_addr;
 902
 903        wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
 904        wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
 905        wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
 906                     key->cipher, key->keyidx, key->keylen, key->flags);
 907        wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
 908
 909        if (is_zero_ether_addr(addr)) {
 910                /* We dont support TX only encryption */
 911                ret = -EOPNOTSUPP;
 912                goto out;
 913        }
 914
 915        mutex_lock(&wl->mutex);
 916
 917        switch (cmd) {
 918        case SET_KEY:
 919                if (wl->monitor_present) {
 920                        ret = -EOPNOTSUPP;
 921                        goto out_unlock;
 922                }
 923                wl_cmd->key_action = KEY_ADD_OR_REPLACE;
 924                break;
 925        case DISABLE_KEY:
 926                wl_cmd->key_action = KEY_REMOVE;
 927                break;
 928        default:
 929                wl1251_error("Unsupported key cmd 0x%x", cmd);
 930                break;
 931        }
 932
 933        ret = wl1251_ps_elp_wakeup(wl);
 934        if (ret < 0)
 935                goto out_unlock;
 936
 937        ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
 938        if (ret < 0) {
 939                wl1251_error("Set KEY type failed");
 940                goto out_sleep;
 941        }
 942
 943        if (wl_cmd->key_type != KEY_WEP_DEFAULT)
 944                memcpy(wl_cmd->addr, addr, ETH_ALEN);
 945
 946        if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) ||
 947            (wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) {
 948                /*
 949                 * We get the key in the following form:
 950                 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
 951                 * but the target is expecting:
 952                 * TKIP - RX MIC - TX MIC
 953                 */
 954                memcpy(wl_cmd->key, key->key, 16);
 955                memcpy(wl_cmd->key + 16, key->key + 24, 8);
 956                memcpy(wl_cmd->key + 24, key->key + 16, 8);
 957
 958        } else {
 959                memcpy(wl_cmd->key, key->key, key->keylen);
 960        }
 961        wl_cmd->key_size = key->keylen;
 962
 963        wl_cmd->id = key->keyidx;
 964        wl_cmd->ssid_profile = 0;
 965
 966        wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd));
 967
 968        ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd));
 969        if (ret < 0) {
 970                wl1251_warning("could not set keys");
 971                goto out_sleep;
 972        }
 973
 974out_sleep:
 975        wl1251_ps_elp_sleep(wl);
 976
 977out_unlock:
 978        mutex_unlock(&wl->mutex);
 979
 980out:
 981        kfree(wl_cmd);
 982
 983        return ret;
 984}
 985
 986static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
 987                             struct ieee80211_vif *vif,
 988                             struct ieee80211_scan_request *hw_req)
 989{
 990        struct cfg80211_scan_request *req = &hw_req->req;
 991        struct wl1251 *wl = hw->priv;
 992        struct sk_buff *skb;
 993        size_t ssid_len = 0;
 994        u8 *ssid = NULL;
 995        int ret;
 996
 997        wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
 998
 999        if (req->n_ssids) {
1000                ssid = req->ssids[0].ssid;
1001                ssid_len = req->ssids[0].ssid_len;
1002        }
1003
1004        mutex_lock(&wl->mutex);
1005
1006        if (wl->scanning) {
1007                wl1251_debug(DEBUG_SCAN, "scan already in progress");
1008                ret = -EINVAL;
1009                goto out;
1010        }
1011
1012        ret = wl1251_ps_elp_wakeup(wl);
1013        if (ret < 0)
1014                goto out;
1015
1016        if (hw->conf.flags & IEEE80211_CONF_IDLE) {
1017                ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
1018                if (ret < 0)
1019                        goto out_sleep;
1020                ret = wl1251_join(wl, wl->bss_type, wl->channel,
1021                                  wl->beacon_int, wl->dtim_period);
1022                if (ret < 0)
1023                        goto out_sleep;
1024        }
1025
1026        skb = ieee80211_probereq_get(wl->hw, wl->vif->addr, ssid, ssid_len,
1027                                     req->ie_len);
1028        if (!skb) {
1029                ret = -ENOMEM;
1030                goto out_idle;
1031        }
1032        if (req->ie_len)
1033                skb_put_data(skb, req->ie, req->ie_len);
1034
1035        ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, skb->data,
1036                                      skb->len);
1037        dev_kfree_skb(skb);
1038        if (ret < 0)
1039                goto out_idle;
1040
1041        ret = wl1251_cmd_trigger_scan_to(wl, 0);
1042        if (ret < 0)
1043                goto out_idle;
1044
1045        wl->scanning = true;
1046
1047        ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
1048                              req->n_channels, WL1251_SCAN_NUM_PROBES);
1049        if (ret < 0) {
1050                wl1251_debug(DEBUG_SCAN, "scan failed %d", ret);
1051                wl->scanning = false;
1052                goto out_idle;
1053        }
1054        goto out_sleep;
1055
1056out_idle:
1057        if (hw->conf.flags & IEEE80211_CONF_IDLE)
1058                ret = wl1251_ps_set_mode(wl, STATION_IDLE);
1059out_sleep:
1060        wl1251_ps_elp_sleep(wl);
1061
1062out:
1063        mutex_unlock(&wl->mutex);
1064
1065        return ret;
1066}
1067
1068static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
1069{
1070        struct wl1251 *wl = hw->priv;
1071        int ret;
1072
1073        mutex_lock(&wl->mutex);
1074
1075        ret = wl1251_ps_elp_wakeup(wl);
1076        if (ret < 0)
1077                goto out;
1078
1079        ret = wl1251_acx_rts_threshold(wl, (u16) value);
1080        if (ret < 0)
1081                wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret);
1082
1083        wl1251_ps_elp_sleep(wl);
1084
1085out:
1086        mutex_unlock(&wl->mutex);
1087
1088        return ret;
1089}
1090
1091static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
1092                                       struct ieee80211_vif *vif,
1093                                       struct ieee80211_bss_conf *bss_conf,
1094                                       u32 changed)
1095{
1096        struct wl1251 *wl = hw->priv;
1097        struct sk_buff *beacon, *skb;
1098        bool enable;
1099        int ret;
1100
1101        wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
1102
1103        mutex_lock(&wl->mutex);
1104
1105        ret = wl1251_ps_elp_wakeup(wl);
1106        if (ret < 0)
1107                goto out;
1108
1109        if (changed & BSS_CHANGED_CQM) {
1110                ret = wl1251_acx_low_rssi(wl, bss_conf->cqm_rssi_thold,
1111                                          WL1251_DEFAULT_LOW_RSSI_WEIGHT,
1112                                          WL1251_DEFAULT_LOW_RSSI_DEPTH,
1113                                          WL1251_ACX_LOW_RSSI_TYPE_EDGE);
1114                if (ret < 0)
1115                        goto out;
1116                wl->rssi_thold = bss_conf->cqm_rssi_thold;
1117        }
1118
1119        if ((changed & BSS_CHANGED_BSSID) &&
1120            memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
1121                memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
1122
1123                if (!is_zero_ether_addr(wl->bssid)) {
1124                        ret = wl1251_build_null_data(wl);
1125                        if (ret < 0)
1126                                goto out_sleep;
1127
1128                        ret = wl1251_build_qos_null_data(wl);
1129                        if (ret < 0)
1130                                goto out_sleep;
1131
1132                        ret = wl1251_join(wl, wl->bss_type, wl->channel,
1133                                          wl->beacon_int, wl->dtim_period);
1134                        if (ret < 0)
1135                                goto out_sleep;
1136                }
1137        }
1138
1139        if (changed & BSS_CHANGED_ASSOC) {
1140                if (bss_conf->assoc) {
1141                        wl->beacon_int = bss_conf->beacon_int;
1142
1143                        skb = ieee80211_pspoll_get(wl->hw, wl->vif);
1144                        if (!skb)
1145                                goto out_sleep;
1146
1147                        ret = wl1251_cmd_template_set(wl, CMD_PS_POLL,
1148                                                      skb->data,
1149                                                      skb->len);
1150                        dev_kfree_skb(skb);
1151                        if (ret < 0)
1152                                goto out_sleep;
1153
1154                        ret = wl1251_acx_aid(wl, bss_conf->aid);
1155                        if (ret < 0)
1156                                goto out_sleep;
1157                } else {
1158                        /* use defaults when not associated */
1159                        wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
1160                        wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
1161                }
1162        }
1163        if (changed & BSS_CHANGED_ERP_SLOT) {
1164                if (bss_conf->use_short_slot)
1165                        ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT);
1166                else
1167                        ret = wl1251_acx_slot(wl, SLOT_TIME_LONG);
1168                if (ret < 0) {
1169                        wl1251_warning("Set slot time failed %d", ret);
1170                        goto out_sleep;
1171                }
1172        }
1173
1174        if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1175                if (bss_conf->use_short_preamble)
1176                        wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
1177                else
1178                        wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
1179        }
1180
1181        if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1182                if (bss_conf->use_cts_prot)
1183                        ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE);
1184                else
1185                        ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
1186                if (ret < 0) {
1187                        wl1251_warning("Set ctsprotect failed %d", ret);
1188                        goto out_sleep;
1189                }
1190        }
1191
1192        if (changed & BSS_CHANGED_ARP_FILTER) {
1193                __be32 addr = bss_conf->arp_addr_list[0];
1194                WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
1195
1196                enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc;
1197                ret = wl1251_acx_arp_ip_filter(wl, enable, addr);
1198                if (ret < 0)
1199                        goto out_sleep;
1200        }
1201
1202        if (changed & BSS_CHANGED_BEACON) {
1203                beacon = ieee80211_beacon_get(hw, vif);
1204                if (!beacon)
1205                        goto out_sleep;
1206
1207                ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
1208                                              beacon->len);
1209
1210                if (ret < 0) {
1211                        dev_kfree_skb(beacon);
1212                        goto out_sleep;
1213                }
1214
1215                ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
1216                                              beacon->len);
1217
1218                dev_kfree_skb(beacon);
1219
1220                if (ret < 0)
1221                        goto out_sleep;
1222
1223                ret = wl1251_join(wl, wl->bss_type, wl->channel,
1224                                  wl->beacon_int, wl->dtim_period);
1225
1226                if (ret < 0)
1227                        goto out_sleep;
1228        }
1229
1230out_sleep:
1231        wl1251_ps_elp_sleep(wl);
1232
1233out:
1234        mutex_unlock(&wl->mutex);
1235}
1236
1237
1238/* can't be const, mac80211 writes to this */
1239static struct ieee80211_rate wl1251_rates[] = {
1240        { .bitrate = 10,
1241          .hw_value = 0x1,
1242          .hw_value_short = 0x1, },
1243        { .bitrate = 20,
1244          .hw_value = 0x2,
1245          .hw_value_short = 0x2,
1246          .flags = IEEE80211_RATE_SHORT_PREAMBLE },
1247        { .bitrate = 55,
1248          .hw_value = 0x4,
1249          .hw_value_short = 0x4,
1250          .flags = IEEE80211_RATE_SHORT_PREAMBLE },
1251        { .bitrate = 110,
1252          .hw_value = 0x20,
1253          .hw_value_short = 0x20,
1254          .flags = IEEE80211_RATE_SHORT_PREAMBLE },
1255        { .bitrate = 60,
1256          .hw_value = 0x8,
1257          .hw_value_short = 0x8, },
1258        { .bitrate = 90,
1259          .hw_value = 0x10,
1260          .hw_value_short = 0x10, },
1261        { .bitrate = 120,
1262          .hw_value = 0x40,
1263          .hw_value_short = 0x40, },
1264        { .bitrate = 180,
1265          .hw_value = 0x80,
1266          .hw_value_short = 0x80, },
1267        { .bitrate = 240,
1268          .hw_value = 0x200,
1269          .hw_value_short = 0x200, },
1270        { .bitrate = 360,
1271         .hw_value = 0x400,
1272         .hw_value_short = 0x400, },
1273        { .bitrate = 480,
1274          .hw_value = 0x800,
1275          .hw_value_short = 0x800, },
1276        { .bitrate = 540,
1277          .hw_value = 0x1000,
1278          .hw_value_short = 0x1000, },
1279};
1280
1281/* can't be const, mac80211 writes to this */
1282static struct ieee80211_channel wl1251_channels[] = {
1283        { .hw_value = 1, .center_freq = 2412},
1284        { .hw_value = 2, .center_freq = 2417},
1285        { .hw_value = 3, .center_freq = 2422},
1286        { .hw_value = 4, .center_freq = 2427},
1287        { .hw_value = 5, .center_freq = 2432},
1288        { .hw_value = 6, .center_freq = 2437},
1289        { .hw_value = 7, .center_freq = 2442},
1290        { .hw_value = 8, .center_freq = 2447},
1291        { .hw_value = 9, .center_freq = 2452},
1292        { .hw_value = 10, .center_freq = 2457},
1293        { .hw_value = 11, .center_freq = 2462},
1294        { .hw_value = 12, .center_freq = 2467},
1295        { .hw_value = 13, .center_freq = 2472},
1296};
1297
1298static int wl1251_op_conf_tx(struct ieee80211_hw *hw,
1299                             struct ieee80211_vif *vif, u16 queue,
1300                             const struct ieee80211_tx_queue_params *params)
1301{
1302        enum wl1251_acx_ps_scheme ps_scheme;
1303        struct wl1251 *wl = hw->priv;
1304        int ret;
1305
1306        mutex_lock(&wl->mutex);
1307
1308        wl1251_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);
1309
1310        ret = wl1251_ps_elp_wakeup(wl);
1311        if (ret < 0)
1312                goto out;
1313
1314        /* mac80211 uses units of 32 usec */
1315        ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
1316                                params->cw_min, params->cw_max,
1317                                params->aifs, params->txop * 32);
1318        if (ret < 0)
1319                goto out_sleep;
1320
1321        if (params->uapsd)
1322                ps_scheme = WL1251_ACX_PS_SCHEME_UPSD_TRIGGER;
1323        else
1324                ps_scheme = WL1251_ACX_PS_SCHEME_LEGACY;
1325
1326        ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
1327                                 CHANNEL_TYPE_EDCF,
1328                                 wl1251_tx_get_queue(queue), ps_scheme,
1329                                 WL1251_ACX_ACK_POLICY_LEGACY);
1330        if (ret < 0)
1331                goto out_sleep;
1332
1333out_sleep:
1334        wl1251_ps_elp_sleep(wl);
1335
1336out:
1337        mutex_unlock(&wl->mutex);
1338
1339        return ret;
1340}
1341
1342static int wl1251_op_get_survey(struct ieee80211_hw *hw, int idx,
1343                                struct survey_info *survey)
1344{
1345        struct wl1251 *wl = hw->priv;
1346        struct ieee80211_conf *conf = &hw->conf;
1347 
1348        if (idx != 0)
1349                return -ENOENT;
1350 
1351        survey->channel = conf->chandef.chan;
1352        survey->filled = SURVEY_INFO_NOISE_DBM;
1353        survey->noise = wl->noise;
1354 
1355        return 0;
1356}
1357
1358/* can't be const, mac80211 writes to this */
1359static struct ieee80211_supported_band wl1251_band_2ghz = {
1360        .channels = wl1251_channels,
1361        .n_channels = ARRAY_SIZE(wl1251_channels),
1362        .bitrates = wl1251_rates,
1363        .n_bitrates = ARRAY_SIZE(wl1251_rates),
1364};
1365
1366static const struct ieee80211_ops wl1251_ops = {
1367        .start = wl1251_op_start,
1368        .stop = wl1251_op_stop,
1369        .add_interface = wl1251_op_add_interface,
1370        .remove_interface = wl1251_op_remove_interface,
1371        .config = wl1251_op_config,
1372        .prepare_multicast = wl1251_op_prepare_multicast,
1373        .configure_filter = wl1251_op_configure_filter,
1374        .tx = wl1251_op_tx,
1375        .set_key = wl1251_op_set_key,
1376        .hw_scan = wl1251_op_hw_scan,
1377        .bss_info_changed = wl1251_op_bss_info_changed,
1378        .set_rts_threshold = wl1251_op_set_rts_threshold,
1379        .conf_tx = wl1251_op_conf_tx,
1380        .get_survey = wl1251_op_get_survey,
1381};
1382
1383static int wl1251_read_eeprom_byte(struct wl1251 *wl, off_t offset, u8 *data)
1384{
1385        unsigned long timeout;
1386
1387        wl1251_reg_write32(wl, EE_ADDR, offset);
1388        wl1251_reg_write32(wl, EE_CTL, EE_CTL_READ);
1389
1390        /* EE_CTL_READ clears when data is ready */
1391        timeout = jiffies + msecs_to_jiffies(100);
1392        while (1) {
1393                if (!(wl1251_reg_read32(wl, EE_CTL) & EE_CTL_READ))
1394                        break;
1395
1396                if (time_after(jiffies, timeout))
1397                        return -ETIMEDOUT;
1398
1399                msleep(1);
1400        }
1401
1402        *data = wl1251_reg_read32(wl, EE_DATA);
1403        return 0;
1404}
1405
1406static int wl1251_read_eeprom(struct wl1251 *wl, off_t offset,
1407                              u8 *data, size_t len)
1408{
1409        size_t i;
1410        int ret;
1411
1412        wl1251_reg_write32(wl, EE_START, 0);
1413
1414        for (i = 0; i < len; i++) {
1415                ret = wl1251_read_eeprom_byte(wl, offset + i, &data[i]);
1416                if (ret < 0)
1417                        return ret;
1418        }
1419
1420        return 0;
1421}
1422
1423static int wl1251_read_eeprom_mac(struct wl1251 *wl)
1424{
1425        u8 mac[ETH_ALEN];
1426        int i, ret;
1427
1428        wl1251_set_partition(wl, 0, 0, REGISTERS_BASE, REGISTERS_DOWN_SIZE);
1429
1430        ret = wl1251_read_eeprom(wl, 0x1c, mac, sizeof(mac));
1431        if (ret < 0) {
1432                wl1251_warning("failed to read MAC address from EEPROM");
1433                return ret;
1434        }
1435
1436        /* MAC is stored in reverse order */
1437        for (i = 0; i < ETH_ALEN; i++)
1438                wl->mac_addr[i] = mac[ETH_ALEN - i - 1];
1439
1440        return 0;
1441}
1442
1443#define NVS_OFF_MAC_LEN 0x19
1444#define NVS_OFF_MAC_ADDR_LO 0x1a
1445#define NVS_OFF_MAC_ADDR_HI 0x1b
1446#define NVS_OFF_MAC_DATA 0x1c
1447
1448static int wl1251_check_nvs_mac(struct wl1251 *wl)
1449{
1450        if (wl->nvs_len < 0x24)
1451                return -ENODATA;
1452
1453        /* length is 2 and data address is 0x546c (ANDed with 0xfffe) */
1454        if (wl->nvs[NVS_OFF_MAC_LEN] != 2 ||
1455            wl->nvs[NVS_OFF_MAC_ADDR_LO] != 0x6d ||
1456            wl->nvs[NVS_OFF_MAC_ADDR_HI] != 0x54)
1457                return -EINVAL;
1458
1459        return 0;
1460}
1461
1462static int wl1251_read_nvs_mac(struct wl1251 *wl)
1463{
1464        u8 mac[ETH_ALEN];
1465        int i, ret;
1466
1467        ret = wl1251_check_nvs_mac(wl);
1468        if (ret)
1469                return ret;
1470
1471        /* MAC is stored in reverse order */
1472        for (i = 0; i < ETH_ALEN; i++)
1473                mac[i] = wl->nvs[NVS_OFF_MAC_DATA + ETH_ALEN - i - 1];
1474
1475        /* 00:00:20:07:03:09 is in example file wl1251-nvs.bin, so invalid */
1476        if (ether_addr_equal_unaligned(mac, "\x00\x00\x20\x07\x03\x09"))
1477                return -EINVAL;
1478
1479        memcpy(wl->mac_addr, mac, ETH_ALEN);
1480        return 0;
1481}
1482
1483static int wl1251_write_nvs_mac(struct wl1251 *wl)
1484{
1485        int i, ret;
1486
1487        ret = wl1251_check_nvs_mac(wl);
1488        if (ret)
1489                return ret;
1490
1491        /* MAC is stored in reverse order */
1492        for (i = 0; i < ETH_ALEN; i++)
1493                wl->nvs[NVS_OFF_MAC_DATA + i] = wl->mac_addr[ETH_ALEN - i - 1];
1494
1495        return 0;
1496}
1497
1498static int wl1251_register_hw(struct wl1251 *wl)
1499{
1500        int ret;
1501
1502        if (wl->mac80211_registered)
1503                return 0;
1504
1505        SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
1506
1507        ret = ieee80211_register_hw(wl->hw);
1508        if (ret < 0) {
1509                wl1251_error("unable to register mac80211 hw: %d", ret);
1510                return ret;
1511        }
1512
1513        wl->mac80211_registered = true;
1514
1515        wl1251_notice("loaded");
1516
1517        return 0;
1518}
1519
1520int wl1251_init_ieee80211(struct wl1251 *wl)
1521{
1522        int ret;
1523
1524        /* The tx descriptor buffer and the TKIP space */
1525        wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
1526                + WL1251_TKIP_IV_SPACE;
1527
1528        /* unit us */
1529        /* FIXME: find a proper value */
1530
1531        ieee80211_hw_set(wl->hw, SIGNAL_DBM);
1532        ieee80211_hw_set(wl->hw, SUPPORTS_PS);
1533
1534        wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1535                                         BIT(NL80211_IFTYPE_ADHOC);
1536        wl->hw->wiphy->max_scan_ssids = 1;
1537        wl->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wl1251_band_2ghz;
1538
1539        wl->hw->queues = 4;
1540
1541        if (wl->nvs == NULL && !wl->use_eeprom) {
1542                ret = wl1251_fetch_nvs(wl);
1543                if (ret < 0)
1544                        goto out;
1545        }
1546
1547        if (wl->use_eeprom)
1548                ret = wl1251_read_eeprom_mac(wl);
1549        else
1550                ret = wl1251_read_nvs_mac(wl);
1551
1552        if (ret == 0 && !is_valid_ether_addr(wl->mac_addr))
1553                ret = -EINVAL;
1554
1555        if (ret < 0) {
1556                /*
1557                 * In case our MAC address is not correctly set,
1558                 * we use a random but Nokia MAC.
1559                 */
1560                static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
1561                memcpy(wl->mac_addr, nokia_oui, 3);
1562                get_random_bytes(wl->mac_addr + 3, 3);
1563                if (!wl->use_eeprom)
1564                        wl1251_write_nvs_mac(wl);
1565                wl1251_warning("MAC address in eeprom or nvs data is not valid");
1566                wl1251_warning("Setting random MAC address: %pM", wl->mac_addr);
1567        }
1568
1569        ret = wl1251_register_hw(wl);
1570        if (ret)
1571                goto out;
1572
1573        wl1251_debugfs_init(wl);
1574        wl1251_notice("initialized");
1575
1576        ret = 0;
1577
1578out:
1579        return ret;
1580}
1581EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
1582
1583struct ieee80211_hw *wl1251_alloc_hw(void)
1584{
1585        struct ieee80211_hw *hw;
1586        struct wl1251 *wl;
1587        int i;
1588
1589        hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
1590        if (!hw) {
1591                wl1251_error("could not alloc ieee80211_hw");
1592                return ERR_PTR(-ENOMEM);
1593        }
1594
1595        wl = hw->priv;
1596        memset(wl, 0, sizeof(*wl));
1597
1598        wl->hw = hw;
1599
1600        wl->data_in_count = 0;
1601
1602        skb_queue_head_init(&wl->tx_queue);
1603
1604        INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
1605        wl->channel = WL1251_DEFAULT_CHANNEL;
1606        wl->monitor_present = false;
1607        wl->joined = false;
1608        wl->scanning = false;
1609        wl->bss_type = MAX_BSS_TYPE;
1610        wl->default_key = 0;
1611        wl->listen_int = 1;
1612        wl->rx_counter = 0;
1613        wl->rx_handled = 0;
1614        wl->rx_current_buffer = 0;
1615        wl->rx_last_id = 0;
1616        wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
1617        wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
1618        wl->elp = false;
1619        wl->station_mode = STATION_ACTIVE_MODE;
1620        wl->psm_requested = false;
1621        wl->psm_entry_retry = 0;
1622        wl->tx_queue_stopped = false;
1623        wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
1624        wl->rssi_thold = 0;
1625        wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
1626        wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
1627        wl->vif = NULL;
1628
1629        for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
1630                wl->tx_frames[i] = NULL;
1631
1632        wl->next_tx_complete = 0;
1633
1634        INIT_WORK(&wl->irq_work, wl1251_irq_work);
1635        INIT_WORK(&wl->tx_work, wl1251_tx_work);
1636
1637        wl->state = WL1251_STATE_OFF;
1638        mutex_init(&wl->mutex);
1639        spin_lock_init(&wl->wl_lock);
1640
1641        wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
1642        wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
1643
1644        wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
1645        if (!wl->rx_descriptor) {
1646                wl1251_error("could not allocate memory for rx descriptor");
1647                ieee80211_free_hw(hw);
1648                return ERR_PTR(-ENOMEM);
1649        }
1650
1651        return hw;
1652}
1653EXPORT_SYMBOL_GPL(wl1251_alloc_hw);
1654
1655int wl1251_free_hw(struct wl1251 *wl)
1656{
1657        ieee80211_unregister_hw(wl->hw);
1658
1659        wl1251_debugfs_exit(wl);
1660
1661        kfree(wl->target_mem_map);
1662        kfree(wl->data_path);
1663        vfree(wl->fw);
1664        wl->fw = NULL;
1665        kfree(wl->nvs);
1666        wl->nvs = NULL;
1667
1668        kfree(wl->rx_descriptor);
1669        wl->rx_descriptor = NULL;
1670
1671        ieee80211_free_hw(wl->hw);
1672
1673        return 0;
1674}
1675EXPORT_SYMBOL_GPL(wl1251_free_hw);
1676
1677MODULE_DESCRIPTION("TI wl1251 Wireless LAN Driver Core");
1678MODULE_LICENSE("GPL");
1679MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
1680MODULE_FIRMWARE(WL1251_FW_NAME);
1681MODULE_FIRMWARE(WL1251_NVS_NAME);
1682