linux/drivers/scsi/aic7xxx/aicasm/aicasm.c
<<
>>
Prefs
   1/*
   2 * Aic7xxx SCSI host adapter firmware assembler
   3 *
   4 * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs.
   5 * Copyright (c) 2001, 2002 Adaptec Inc.
   6 * All rights reserved.
   7 *
   8 * Redistribution and use in source and binary forms, with or without
   9 * modification, are permitted provided that the following conditions
  10 * are met:
  11 * 1. Redistributions of source code must retain the above copyright
  12 *    notice, this list of conditions, and the following disclaimer,
  13 *    without modification.
  14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  15 *    substantially similar to the "NO WARRANTY" disclaimer below
  16 *    ("Disclaimer") and any redistribution must be conditioned upon
  17 *    including a substantially similar Disclaimer requirement for further
  18 *    binary redistribution.
  19 * 3. Neither the names of the above-listed copyright holders nor the names
  20 *    of any contributors may be used to endorse or promote products derived
  21 *    from this software without specific prior written permission.
  22 *
  23 * Alternatively, this software may be distributed under the terms of the
  24 * GNU General Public License ("GPL") version 2 as published by the Free
  25 * Software Foundation.
  26 *
  27 * NO WARRANTY
  28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38 * POSSIBILITY OF SUCH DAMAGES.
  39 *
  40 * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $
  41 *
  42 * $FreeBSD$
  43 */
  44#include <sys/types.h>
  45#include <sys/mman.h>
  46
  47#include <ctype.h>
  48#include <inttypes.h>
  49#include <regex.h>
  50#include <stdio.h>
  51#include <stdlib.h>
  52#include <string.h>
  53#include <sysexits.h>
  54#include <unistd.h>
  55
  56#if linux
  57#include <endian.h>
  58#else
  59#include <machine/endian.h>
  60#endif
  61
  62#include "aicasm.h"
  63#include "aicasm_symbol.h"
  64#include "aicasm_insformat.h"
  65
  66typedef struct patch {
  67        STAILQ_ENTRY(patch) links;
  68        int             patch_func;
  69        u_int           begin;
  70        u_int           skip_instr;
  71        u_int           skip_patch;
  72} patch_t;
  73
  74STAILQ_HEAD(patch_list, patch) patches;
  75
  76static void usage(void);
  77static void back_patch(void);
  78static void output_code(void);
  79static void output_listing(char *ifilename);
  80static void dump_scope(scope_t *scope);
  81static void emit_patch(scope_t *scope, int patch);
  82static int check_patch(patch_t **start_patch, int start_instr,
  83                       int *skip_addr, int *func_vals);
  84
  85struct path_list search_path;
  86int includes_search_curdir;
  87char *appname;
  88char *stock_include_file;
  89FILE *ofile;
  90char *ofilename;
  91char *regfilename;
  92FILE *regfile;
  93char *listfilename;
  94FILE *listfile;
  95char *regdiagfilename;
  96FILE *regdiagfile;
  97int   src_mode;
  98int   dst_mode;
  99
 100static STAILQ_HEAD(,instruction) seq_program;
 101struct cs_tailq cs_tailq;
 102struct scope_list scope_stack;
 103symlist_t patch_functions;
 104
 105#if DEBUG
 106extern int yy_flex_debug;
 107extern int mm_flex_debug;
 108extern int yydebug;
 109extern int mmdebug;
 110#endif
 111extern FILE *yyin;
 112extern int yyparse(void);
 113
 114int main(int argc, char *argv[]);
 115
 116int
 117main(int argc, char *argv[])
 118{
 119        extern char *optarg;
 120        extern int optind;
 121        int  ch;
 122        int  retval;
 123        char *inputfilename;
 124        scope_t *sentinal;
 125
 126        STAILQ_INIT(&patches);
 127        SLIST_INIT(&search_path);
 128        STAILQ_INIT(&seq_program);
 129        TAILQ_INIT(&cs_tailq);
 130        SLIST_INIT(&scope_stack);
 131
 132        /* Set Sentinal scope node */
 133        sentinal = scope_alloc();
 134        sentinal->type = SCOPE_ROOT;
 135        
 136        includes_search_curdir = 1;
 137        appname = *argv;
 138        regfile = NULL;
 139        listfile = NULL;
 140#if DEBUG
 141        yy_flex_debug = 0;
 142        mm_flex_debug = 0;
 143        yydebug = 0;
 144        mmdebug = 0;
 145#endif
 146        while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:")) != -1) {
 147                switch(ch) {
 148                case 'd':
 149#if DEBUG
 150                        if (strcmp(optarg, "s") == 0) {
 151                                yy_flex_debug = 1;
 152                                mm_flex_debug = 1;
 153                        } else if (strcmp(optarg, "p") == 0) {
 154                                yydebug = 1;
 155                                mmdebug = 1;
 156                        } else {
 157                                fprintf(stderr, "%s: -d Requires either an "
 158                                        "'s' or 'p' argument\n", appname);
 159                                usage();
 160                        }
 161#else
 162                        stop("-d: Assembler not built with debugging "
 163                             "information", EX_SOFTWARE);
 164#endif
 165                        break;
 166                case 'i':
 167                        stock_include_file = optarg;
 168                        break;
 169                case 'l':
 170                        /* Create a program listing */
 171                        if ((listfile = fopen(optarg, "w")) == NULL) {
 172                                perror(optarg);
 173                                stop(NULL, EX_CANTCREAT);
 174                        }
 175                        listfilename = optarg;
 176                        break;
 177                case 'n':
 178                        /* Don't complain about the -nostdinc directrive */
 179                        if (strcmp(optarg, "ostdinc")) {
 180                                fprintf(stderr, "%s: Unknown option -%c%s\n",
 181                                        appname, ch, optarg);
 182                                usage();
 183                                /* NOTREACHED */
 184                        }
 185                        break;
 186                case 'o':
 187                        if ((ofile = fopen(optarg, "w")) == NULL) {
 188                                perror(optarg);
 189                                stop(NULL, EX_CANTCREAT);
 190                        }
 191                        ofilename = optarg;
 192                        break;
 193                case 'p':
 194                        /* Create Register Diagnostic "printing" Functions */
 195                        if ((regdiagfile = fopen(optarg, "w")) == NULL) {
 196                                perror(optarg);
 197                                stop(NULL, EX_CANTCREAT);
 198                        }
 199                        regdiagfilename = optarg;
 200                        break;
 201                case 'r':
 202                        if ((regfile = fopen(optarg, "w")) == NULL) {
 203                                perror(optarg);
 204                                stop(NULL, EX_CANTCREAT);
 205                        }
 206                        regfilename = optarg;
 207                        break;
 208                case 'I':
 209                {
 210                        path_entry_t include_dir;
 211
 212                        if (strcmp(optarg, "-") == 0) {
 213                                if (includes_search_curdir == 0) {
 214                                        fprintf(stderr, "%s: Warning - '-I-' "
 215                                                        "specified multiple "
 216                                                        "times\n", appname);
 217                                }
 218                                includes_search_curdir = 0;
 219                                for (include_dir = SLIST_FIRST(&search_path);
 220                                     include_dir != NULL;
 221                                     include_dir = SLIST_NEXT(include_dir,
 222                                                              links))
 223                                        /*
 224                                         * All entries before a '-I-' only
 225                                         * apply to includes specified with
 226                                         * quotes instead of "<>".
 227                                         */
 228                                        include_dir->quoted_includes_only = 1;
 229                        } else {
 230                                include_dir =
 231                                    (path_entry_t)malloc(sizeof(*include_dir));
 232                                if (include_dir == NULL) {
 233                                        perror(optarg);
 234                                        stop(NULL, EX_OSERR);
 235                                }
 236                                include_dir->directory = strdup(optarg);
 237                                if (include_dir->directory == NULL) {
 238                                        perror(optarg);
 239                                        stop(NULL, EX_OSERR);
 240                                }
 241                                include_dir->quoted_includes_only = 0;
 242                                SLIST_INSERT_HEAD(&search_path, include_dir,
 243                                                  links);
 244                        }
 245                        break;
 246                }
 247                case '?':
 248                default:
 249                        usage();
 250                        /* NOTREACHED */
 251                }
 252        }
 253        argc -= optind;
 254        argv += optind;
 255
 256        if (argc != 1) {
 257                fprintf(stderr, "%s: No input file specified\n", appname);
 258                usage();
 259                /* NOTREACHED */
 260        }
 261
 262        if (regdiagfile != NULL
 263         && (regfile == NULL || stock_include_file == NULL)) {
 264                fprintf(stderr,
 265                        "%s: The -p option requires the -r and -i options.\n",
 266                        appname);
 267                usage();
 268                /* NOTREACHED */
 269        }
 270        symtable_open();
 271        inputfilename = *argv;
 272        include_file(*argv, SOURCE_FILE);
 273        retval = yyparse();
 274        if (retval == 0) {
 275                if (SLIST_FIRST(&scope_stack) == NULL
 276                 || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) {
 277                        stop("Unterminated conditional expression", EX_DATAERR);
 278                        /* NOTREACHED */
 279                }
 280
 281                /* Process outmost scope */
 282                process_scope(SLIST_FIRST(&scope_stack));
 283                /*
 284                 * Decend the tree of scopes and insert/emit
 285                 * patches as appropriate.  We perform a depth first
 286                 * tranversal, recursively handling each scope.
 287                 */
 288                /* start at the root scope */
 289                dump_scope(SLIST_FIRST(&scope_stack));
 290
 291                /* Patch up forward jump addresses */
 292                back_patch();
 293
 294                if (ofile != NULL)
 295                        output_code();
 296                if (regfile != NULL)
 297                        symtable_dump(regfile, regdiagfile);
 298                if (listfile != NULL)
 299                        output_listing(inputfilename);
 300        }
 301
 302        stop(NULL, 0);
 303        /* NOTREACHED */
 304        return (0);
 305}
 306
 307static void
 308usage()
 309{
 310
 311        (void)fprintf(stderr,
 312"usage: %-16s [-nostdinc] [-I-] [-I directory] [-o output_file]\n"
 313"       [-r register_output_file [-p register_diag_file -i includefile]]\n"
 314"       [-l program_list_file]\n"
 315"       input_file\n", appname);
 316        exit(EX_USAGE);
 317}
 318
 319static void
 320back_patch()
 321{
 322        struct instruction *cur_instr;
 323
 324        for (cur_instr = STAILQ_FIRST(&seq_program);
 325             cur_instr != NULL;
 326             cur_instr = STAILQ_NEXT(cur_instr, links)) {
 327                if (cur_instr->patch_label != NULL) {
 328                        struct ins_format3 *f3_instr;
 329                        u_int address;
 330
 331                        if (cur_instr->patch_label->type != LABEL) {
 332                                char buf[255];
 333
 334                                snprintf(buf, sizeof(buf),
 335                                         "Undefined label %s",
 336                                         cur_instr->patch_label->name);
 337                                stop(buf, EX_DATAERR);
 338                                /* NOTREACHED */
 339                        }
 340                        f3_instr = &cur_instr->format.format3;
 341                        address = f3_instr->address;
 342                        address += cur_instr->patch_label->info.linfo->address;
 343                        f3_instr->address = address;
 344                }
 345        }
 346}
 347
 348static void
 349output_code()
 350{
 351        struct instruction *cur_instr;
 352        patch_t *cur_patch;
 353        critical_section_t *cs;
 354        symbol_node_t *cur_node;
 355        int instrcount;
 356
 357        instrcount = 0;
 358        fprintf(ofile,
 359"/*\n"
 360" * DO NOT EDIT - This file is automatically generated\n"
 361" *              from the following source files:\n"
 362" *\n"
 363"%s */\n", versions);
 364
 365        fprintf(ofile, "static const uint8_t seqprog[] = {\n");
 366        for (cur_instr = STAILQ_FIRST(&seq_program);
 367             cur_instr != NULL;
 368             cur_instr = STAILQ_NEXT(cur_instr, links)) {
 369
 370                fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x",
 371                        cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n",
 372#ifdef __LITTLE_ENDIAN
 373                        cur_instr->format.bytes[0],
 374                        cur_instr->format.bytes[1],
 375                        cur_instr->format.bytes[2],
 376                        cur_instr->format.bytes[3]);
 377#else
 378                        cur_instr->format.bytes[3],
 379                        cur_instr->format.bytes[2],
 380                        cur_instr->format.bytes[1],
 381                        cur_instr->format.bytes[0]);
 382#endif
 383                instrcount++;
 384        }
 385        fprintf(ofile, "\n};\n\n");
 386
 387        if (patch_arg_list == NULL)
 388                stop("Patch argument list not defined",
 389                     EX_DATAERR);
 390
 391        /*
 392         *  Output patch information.  Patch functions first.
 393         */
 394        fprintf(ofile,
 395"typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list);
 396
 397        for (cur_node = SLIST_FIRST(&patch_functions);
 398             cur_node != NULL;
 399             cur_node = SLIST_NEXT(cur_node,links)) {
 400                fprintf(ofile,
 401"static %spatch_func_t %spatch%d_func;\n"
 402"\n"
 403"static int\n"
 404"%spatch%d_func(%s)\n"
 405"{\n"
 406"       return (%s);\n"
 407"}\n\n",
 408                        prefix,
 409                        prefix,
 410                        cur_node->symbol->info.condinfo->func_num,
 411                        prefix,
 412                        cur_node->symbol->info.condinfo->func_num,
 413                        patch_arg_list,
 414                        cur_node->symbol->name);
 415        }
 416
 417        fprintf(ofile,
 418"static const struct patch {\n"
 419"       %spatch_func_t          *patch_func;\n"
 420"       uint32_t                 begin          :10,\n"
 421"                                skip_instr     :10,\n"
 422"                                skip_patch     :12;\n"
 423"} patches[] = {\n", prefix);
 424
 425        for (cur_patch = STAILQ_FIRST(&patches);
 426             cur_patch != NULL;
 427             cur_patch = STAILQ_NEXT(cur_patch,links)) {
 428                fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }",
 429                        cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n",
 430                        prefix,
 431                        cur_patch->patch_func, cur_patch->begin,
 432                        cur_patch->skip_instr, cur_patch->skip_patch);
 433        }
 434
 435        fprintf(ofile, "\n};\n\n");
 436
 437        fprintf(ofile,
 438"static const struct cs {\n"
 439"       uint16_t        begin;\n"
 440"       uint16_t        end;\n"
 441"} critical_sections[] = {\n");
 442
 443        for (cs = TAILQ_FIRST(&cs_tailq);
 444             cs != NULL;
 445             cs = TAILQ_NEXT(cs, links)) {
 446                fprintf(ofile, "%s\t{ %d, %d }",
 447                        cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n",
 448                        cs->begin_addr, cs->end_addr);
 449        }
 450
 451        fprintf(ofile, "\n};\n\n");
 452
 453        fprintf(ofile,
 454        "#define NUM_CRITICAL_SECTIONS ARRAY_SIZE(critical_sections)\n");
 455
 456        fprintf(stderr, "%s: %d instructions used\n", appname, instrcount);
 457}
 458
 459static void
 460dump_scope(scope_t *scope)
 461{
 462        scope_t *cur_scope;
 463
 464        /*
 465         * Emit the first patch for this scope
 466         */
 467        emit_patch(scope, 0);
 468
 469        /*
 470         * Dump each scope within this one.
 471         */
 472        cur_scope = TAILQ_FIRST(&scope->inner_scope);
 473
 474        while (cur_scope != NULL) {
 475
 476                dump_scope(cur_scope);
 477
 478                cur_scope = TAILQ_NEXT(cur_scope, scope_links);
 479        }
 480
 481        /*
 482         * Emit the second, closing, patch for this scope
 483         */
 484        emit_patch(scope, 1);
 485}
 486
 487void
 488emit_patch(scope_t *scope, int patch)
 489{
 490        patch_info_t *pinfo;
 491        patch_t *new_patch;
 492
 493        pinfo = &scope->patches[patch];
 494
 495        if (pinfo->skip_instr == 0)
 496                /* No-Op patch */
 497                return;
 498
 499        new_patch = (patch_t *)malloc(sizeof(*new_patch));
 500
 501        if (new_patch == NULL)
 502                stop("Could not malloc patch structure", EX_OSERR);
 503
 504        memset(new_patch, 0, sizeof(*new_patch));
 505
 506        if (patch == 0) {
 507                new_patch->patch_func = scope->func_num;
 508                new_patch->begin = scope->begin_addr;
 509        } else {
 510                new_patch->patch_func = 0;
 511                new_patch->begin = scope->end_addr;
 512        }
 513        new_patch->skip_instr = pinfo->skip_instr;
 514        new_patch->skip_patch = pinfo->skip_patch;
 515        STAILQ_INSERT_TAIL(&patches, new_patch, links);
 516}
 517
 518void
 519output_listing(char *ifilename)
 520{
 521        char buf[1024];
 522        FILE *ifile;
 523        struct instruction *cur_instr;
 524        patch_t *cur_patch;
 525        symbol_node_t *cur_func;
 526        int *func_values;
 527        int instrcount;
 528        int instrptr;
 529        int line;
 530        int func_count;
 531        int skip_addr;
 532
 533        instrcount = 0;
 534        instrptr = 0;
 535        line = 1;
 536        skip_addr = 0;
 537        if ((ifile = fopen(ifilename, "r")) == NULL) {
 538                perror(ifilename);
 539                stop(NULL, EX_DATAERR);
 540        }
 541
 542        /*
 543         * Determine which options to apply to this listing.
 544         */
 545        for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions);
 546            cur_func != NULL;
 547            cur_func = SLIST_NEXT(cur_func, links))
 548                func_count++;
 549
 550        func_values = NULL;
 551        if (func_count != 0) {
 552                func_values = (int *)malloc(func_count * sizeof(int));
 553
 554                if (func_values == NULL)
 555                        stop("Could not malloc", EX_OSERR);
 556                
 557                func_values[0] = 0; /* FALSE func */
 558                func_count--;
 559
 560                /*
 561                 * Ask the user to fill in the return values for
 562                 * the rest of the functions.
 563                 */
 564                
 565                
 566                for (cur_func = SLIST_FIRST(&patch_functions);
 567                     cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL;
 568                     cur_func = SLIST_NEXT(cur_func, links), func_count--) {
 569                        int input;
 570                        
 571                        fprintf(stdout, "\n(%s)\n", cur_func->symbol->name);
 572                        fprintf(stdout,
 573                                "Enter the return value for "
 574                                "this expression[T/F]:");
 575
 576                        while (1) {
 577
 578                                input = getchar();
 579                                input = toupper(input);
 580
 581                                if (input == 'T') {
 582                                        func_values[func_count] = 1;
 583                                        break;
 584                                } else if (input == 'F') {
 585                                        func_values[func_count] = 0;
 586                                        break;
 587                                }
 588                        }
 589                        if (isatty(fileno(stdin)) == 0)
 590                                putchar(input);
 591                }
 592                fprintf(stdout, "\nThanks!\n");
 593        }
 594
 595        /* Now output the listing */
 596        cur_patch = STAILQ_FIRST(&patches);
 597        for (cur_instr = STAILQ_FIRST(&seq_program);
 598             cur_instr != NULL;
 599             cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) {
 600
 601                if (check_patch(&cur_patch, instrcount,
 602                                &skip_addr, func_values) == 0) {
 603                        /* Don't count this instruction as it is in a patch
 604                         * that was removed.
 605                         */
 606                        continue;
 607                }
 608
 609                while (line < cur_instr->srcline) {
 610                        fgets(buf, sizeof(buf), ifile);
 611                                fprintf(listfile, "             \t%s", buf);
 612                                line++;
 613                }
 614                fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr,
 615#ifdef __LITTLE_ENDIAN
 616                        cur_instr->format.bytes[0],
 617                        cur_instr->format.bytes[1],
 618                        cur_instr->format.bytes[2],
 619                        cur_instr->format.bytes[3]);
 620#else
 621                        cur_instr->format.bytes[3],
 622                        cur_instr->format.bytes[2],
 623                        cur_instr->format.bytes[1],
 624                        cur_instr->format.bytes[0]);
 625#endif
 626                /*
 627                 * Macro expansions can cause several instructions
 628                 * to be output for a single source line.  Only
 629                 * advance the line once in these cases.
 630                 */
 631                if (line == cur_instr->srcline) {
 632                        fgets(buf, sizeof(buf), ifile);
 633                        fprintf(listfile, "\t%s", buf);
 634                        line++;
 635                } else {
 636                        fprintf(listfile, "\n");
 637                }
 638                instrptr++;
 639        }
 640        /* Dump the remainder of the file */
 641        while(fgets(buf, sizeof(buf), ifile) != NULL)
 642                fprintf(listfile, "             %s", buf);
 643
 644        fclose(ifile);
 645}
 646
 647static int
 648check_patch(patch_t **start_patch, int start_instr,
 649            int *skip_addr, int *func_vals)
 650{
 651        patch_t *cur_patch;
 652
 653        cur_patch = *start_patch;
 654
 655        while (cur_patch != NULL && start_instr == cur_patch->begin) {
 656                if (func_vals[cur_patch->patch_func] == 0) {
 657                        int skip;
 658
 659                        /* Start rejecting code */
 660                        *skip_addr = start_instr + cur_patch->skip_instr;
 661                        for (skip = cur_patch->skip_patch;
 662                             skip > 0 && cur_patch != NULL;
 663                             skip--)
 664                                cur_patch = STAILQ_NEXT(cur_patch, links);
 665                } else {
 666                        /* Accepted this patch.  Advance to the next
 667                         * one and wait for our intruction pointer to
 668                         * hit this point.
 669                         */
 670                        cur_patch = STAILQ_NEXT(cur_patch, links);
 671                }
 672        }
 673
 674        *start_patch = cur_patch;
 675        if (start_instr < *skip_addr)
 676                /* Still skipping */
 677                return (0);
 678
 679        return (1);
 680}
 681
 682/*
 683 * Print out error information if appropriate, and clean up before
 684 * terminating the program.
 685 */
 686void
 687stop(const char *string, int err_code)
 688{
 689        if (string != NULL) {
 690                fprintf(stderr, "%s: ", appname);
 691                if (yyfilename != NULL) {
 692                        fprintf(stderr, "Stopped at file %s, line %d - ",
 693                                yyfilename, yylineno);
 694                }
 695                fprintf(stderr, "%s\n", string);
 696        }
 697
 698        if (ofile != NULL) {
 699                fclose(ofile);
 700                if (err_code != 0) {
 701                        fprintf(stderr, "%s: Removing %s due to error\n",
 702                                appname, ofilename);
 703                        unlink(ofilename);
 704                }
 705        }
 706
 707        if (regfile != NULL) {
 708                fclose(regfile);
 709                if (err_code != 0) {
 710                        fprintf(stderr, "%s: Removing %s due to error\n",
 711                                appname, regfilename);
 712                        unlink(regfilename);
 713                }
 714        }
 715
 716        if (listfile != NULL) {
 717                fclose(listfile);
 718                if (err_code != 0) {
 719                        fprintf(stderr, "%s: Removing %s due to error\n",
 720                                appname, listfilename);
 721                        unlink(listfilename);
 722                }
 723        }
 724
 725        symlist_free(&patch_functions);
 726        symtable_close();
 727
 728        exit(err_code);
 729}
 730
 731struct instruction *
 732seq_alloc()
 733{
 734        struct instruction *new_instr;
 735
 736        new_instr = (struct instruction *)malloc(sizeof(struct instruction));
 737        if (new_instr == NULL)
 738                stop("Unable to malloc instruction object", EX_SOFTWARE);
 739        memset(new_instr, 0, sizeof(*new_instr));
 740        STAILQ_INSERT_TAIL(&seq_program, new_instr, links);
 741        new_instr->srcline = yylineno;
 742        return new_instr;
 743}
 744
 745critical_section_t *
 746cs_alloc()
 747{
 748        critical_section_t *new_cs;
 749
 750        new_cs= (critical_section_t *)malloc(sizeof(critical_section_t));
 751        if (new_cs == NULL)
 752                stop("Unable to malloc critical_section object", EX_SOFTWARE);
 753        memset(new_cs, 0, sizeof(*new_cs));
 754        
 755        TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links);
 756        return new_cs;
 757}
 758
 759scope_t *
 760scope_alloc()
 761{
 762        scope_t *new_scope;
 763
 764        new_scope = (scope_t *)malloc(sizeof(scope_t));
 765        if (new_scope == NULL)
 766                stop("Unable to malloc scope object", EX_SOFTWARE);
 767        memset(new_scope, 0, sizeof(*new_scope));
 768        TAILQ_INIT(&new_scope->inner_scope);
 769        
 770        if (SLIST_FIRST(&scope_stack) != NULL) {
 771                TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope,
 772                                  new_scope, scope_links);
 773        }
 774        /* This patch is now the current scope */
 775        SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links);
 776        return new_scope;
 777}
 778
 779void
 780process_scope(scope_t *scope)
 781{
 782        /*
 783         * We are "leaving" this scope.  We should now have
 784         * enough information to process the lists of scopes
 785         * we encapsulate.
 786         */
 787        scope_t *cur_scope;
 788        u_int skip_patch_count;
 789        u_int skip_instr_count;
 790
 791        cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq);
 792        skip_patch_count = 0;
 793        skip_instr_count = 0;
 794        while (cur_scope != NULL) {
 795                u_int patch0_patch_skip;
 796
 797                patch0_patch_skip = 0;
 798                switch (cur_scope->type) {
 799                case SCOPE_IF:
 800                case SCOPE_ELSE_IF:
 801                        if (skip_instr_count != 0) {
 802                                /* Create a tail patch */
 803                                patch0_patch_skip++;
 804                                cur_scope->patches[1].skip_patch =
 805                                    skip_patch_count + 1;
 806                                cur_scope->patches[1].skip_instr =
 807                                    skip_instr_count;
 808                        }
 809
 810                        /* Count Head patch */
 811                        patch0_patch_skip++;
 812
 813                        /* Count any patches contained in our inner scope */
 814                        patch0_patch_skip += cur_scope->inner_scope_patches;
 815
 816                        cur_scope->patches[0].skip_patch = patch0_patch_skip;
 817                        cur_scope->patches[0].skip_instr =
 818                            cur_scope->end_addr - cur_scope->begin_addr;
 819
 820                        skip_instr_count += cur_scope->patches[0].skip_instr;
 821
 822                        skip_patch_count += patch0_patch_skip;
 823                        if (cur_scope->type == SCOPE_IF) {
 824                                scope->inner_scope_patches += skip_patch_count;
 825                                skip_patch_count = 0;
 826                                skip_instr_count = 0;
 827                        }
 828                        break;
 829                case SCOPE_ELSE:
 830                        /* Count any patches contained in our innter scope */
 831                        skip_patch_count += cur_scope->inner_scope_patches;
 832
 833                        skip_instr_count += cur_scope->end_addr
 834                                          - cur_scope->begin_addr;
 835                        break;
 836                case SCOPE_ROOT:
 837                        stop("Unexpected scope type encountered", EX_SOFTWARE);
 838                        /* NOTREACHED */
 839                }
 840
 841                cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links);
 842        }
 843}
 844