linux/drivers/usb/chipidea/host.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * host.c - ChipIdea USB host controller driver
   4 *
   5 * Copyright (c) 2012 Intel Corporation
   6 *
   7 * Author: Alexander Shishkin
   8 */
   9
  10#include <linux/kernel.h>
  11#include <linux/io.h>
  12#include <linux/usb.h>
  13#include <linux/usb/hcd.h>
  14#include <linux/usb/chipidea.h>
  15#include <linux/regulator/consumer.h>
  16
  17#include "../host/ehci.h"
  18
  19#include "ci.h"
  20#include "bits.h"
  21#include "host.h"
  22
  23static struct hc_driver __read_mostly ci_ehci_hc_driver;
  24static int (*orig_bus_suspend)(struct usb_hcd *hcd);
  25
  26struct ehci_ci_priv {
  27        struct regulator *reg_vbus;
  28};
  29
  30static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
  31{
  32        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
  33        struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
  34        struct device *dev = hcd->self.controller;
  35        struct ci_hdrc *ci = dev_get_drvdata(dev);
  36        int ret = 0;
  37        int port = HCS_N_PORTS(ehci->hcs_params);
  38
  39        if (priv->reg_vbus) {
  40                if (port > 1) {
  41                        dev_warn(dev,
  42                                "Not support multi-port regulator control\n");
  43                        return 0;
  44                }
  45                if (enable)
  46                        ret = regulator_enable(priv->reg_vbus);
  47                else
  48                        ret = regulator_disable(priv->reg_vbus);
  49                if (ret) {
  50                        dev_err(dev,
  51                                "Failed to %s vbus regulator, ret=%d\n",
  52                                enable ? "enable" : "disable", ret);
  53                        return ret;
  54                }
  55        }
  56
  57        if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
  58                /*
  59                 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
  60                 * As HSIC is always HS, this should be safe for others.
  61                 */
  62                hw_port_test_set(ci, 5);
  63                hw_port_test_set(ci, 0);
  64        }
  65        return 0;
  66};
  67
  68static int ehci_ci_reset(struct usb_hcd *hcd)
  69{
  70        struct device *dev = hcd->self.controller;
  71        struct ci_hdrc *ci = dev_get_drvdata(dev);
  72        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
  73        int ret;
  74
  75        ret = ehci_setup(hcd);
  76        if (ret)
  77                return ret;
  78
  79        ehci->need_io_watchdog = 0;
  80
  81        if (ci->platdata->notify_event) {
  82                ret = ci->platdata->notify_event(ci,
  83                                CI_HDRC_CONTROLLER_RESET_EVENT);
  84                if (ret)
  85                        return ret;
  86        }
  87
  88        ci_platform_configure(ci);
  89
  90        return ret;
  91}
  92
  93static const struct ehci_driver_overrides ehci_ci_overrides = {
  94        .extra_priv_size = sizeof(struct ehci_ci_priv),
  95        .port_power      = ehci_ci_portpower,
  96        .reset           = ehci_ci_reset,
  97};
  98
  99static irqreturn_t host_irq(struct ci_hdrc *ci)
 100{
 101        return usb_hcd_irq(ci->irq, ci->hcd);
 102}
 103
 104static int host_start(struct ci_hdrc *ci)
 105{
 106        struct usb_hcd *hcd;
 107        struct ehci_hcd *ehci;
 108        struct ehci_ci_priv *priv;
 109        int ret;
 110
 111        if (usb_disabled())
 112                return -ENODEV;
 113
 114        hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent,
 115                               ci->dev, dev_name(ci->dev), NULL);
 116        if (!hcd)
 117                return -ENOMEM;
 118
 119        dev_set_drvdata(ci->dev, ci);
 120        hcd->rsrc_start = ci->hw_bank.phys;
 121        hcd->rsrc_len = ci->hw_bank.size;
 122        hcd->regs = ci->hw_bank.abs;
 123        hcd->has_tt = 1;
 124
 125        hcd->power_budget = ci->platdata->power_budget;
 126        hcd->tpl_support = ci->platdata->tpl_support;
 127        if (ci->phy || ci->usb_phy)
 128                hcd->skip_phy_initialization = 1;
 129
 130        ehci = hcd_to_ehci(hcd);
 131        ehci->caps = ci->hw_bank.cap;
 132        ehci->has_hostpc = ci->hw_bank.lpm;
 133        ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
 134        ehci->imx28_write_fix = ci->imx28_write_fix;
 135
 136        priv = (struct ehci_ci_priv *)ehci->priv;
 137        priv->reg_vbus = NULL;
 138
 139        if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
 140                if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
 141                        ret = regulator_enable(ci->platdata->reg_vbus);
 142                        if (ret) {
 143                                dev_err(ci->dev,
 144                                "Failed to enable vbus regulator, ret=%d\n",
 145                                                                        ret);
 146                                goto put_hcd;
 147                        }
 148                } else {
 149                        priv->reg_vbus = ci->platdata->reg_vbus;
 150                }
 151        }
 152
 153        ret = usb_add_hcd(hcd, 0, 0);
 154        if (ret) {
 155                goto disable_reg;
 156        } else {
 157                struct usb_otg *otg = &ci->otg;
 158
 159                ci->hcd = hcd;
 160
 161                if (ci_otg_is_fsm_mode(ci)) {
 162                        otg->host = &hcd->self;
 163                        hcd->self.otg_port = 1;
 164                }
 165        }
 166
 167        return ret;
 168
 169disable_reg:
 170        if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 171                        (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 172                regulator_disable(ci->platdata->reg_vbus);
 173put_hcd:
 174        usb_put_hcd(hcd);
 175
 176        return ret;
 177}
 178
 179static void host_stop(struct ci_hdrc *ci)
 180{
 181        struct usb_hcd *hcd = ci->hcd;
 182
 183        if (hcd) {
 184                if (ci->platdata->notify_event)
 185                        ci->platdata->notify_event(ci,
 186                                CI_HDRC_CONTROLLER_STOPPED_EVENT);
 187                usb_remove_hcd(hcd);
 188                ci->role = CI_ROLE_END;
 189                synchronize_irq(ci->irq);
 190                usb_put_hcd(hcd);
 191                if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 192                        (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 193                                regulator_disable(ci->platdata->reg_vbus);
 194        }
 195        ci->hcd = NULL;
 196        ci->otg.host = NULL;
 197}
 198
 199
 200void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 201{
 202        if (ci->role == CI_ROLE_HOST && ci->hcd)
 203                host_stop(ci);
 204}
 205
 206static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
 207{
 208        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 209        int port;
 210        u32 tmp;
 211
 212        int ret = orig_bus_suspend(hcd);
 213
 214        if (ret)
 215                return ret;
 216
 217        port = HCS_N_PORTS(ehci->hcs_params);
 218        while (port--) {
 219                u32 __iomem *reg = &ehci->regs->port_status[port];
 220                u32 portsc = ehci_readl(ehci, reg);
 221
 222                if (portsc & PORT_CONNECT) {
 223                        /*
 224                         * For chipidea, the resume signal will be ended
 225                         * automatically, so for remote wakeup case, the
 226                         * usbcmd.rs may not be set before the resume has
 227                         * ended if other resume paths consumes too much
 228                         * time (~24ms), in that case, the SOF will not
 229                         * send out within 3ms after resume ends, then the
 230                         * high speed device will enter full speed mode.
 231                         */
 232
 233                        tmp = ehci_readl(ehci, &ehci->regs->command);
 234                        tmp |= CMD_RUN;
 235                        ehci_writel(ehci, tmp, &ehci->regs->command);
 236                        /*
 237                         * It needs a short delay between set RS bit and PHCD.
 238                         */
 239                        usleep_range(150, 200);
 240                        break;
 241                }
 242        }
 243
 244        return 0;
 245}
 246
 247int ci_hdrc_host_init(struct ci_hdrc *ci)
 248{
 249        struct ci_role_driver *rdrv;
 250
 251        if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
 252                return -ENXIO;
 253
 254        rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
 255        if (!rdrv)
 256                return -ENOMEM;
 257
 258        rdrv->start     = host_start;
 259        rdrv->stop      = host_stop;
 260        rdrv->irq       = host_irq;
 261        rdrv->name      = "host";
 262        ci->roles[CI_ROLE_HOST] = rdrv;
 263
 264        return 0;
 265}
 266
 267void ci_hdrc_host_driver_init(void)
 268{
 269        ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
 270        orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
 271        ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
 272}
 273