/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_FOTG210_H
#define __LINUX_FOTG210_H

#include <linux/usb/ehci-dbgp.h>

/* definitions used for the EHCI driver */

/*
 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
 * __leXX (normally) or __beXX (given FOTG210_BIG_ENDIAN_DESC), depending on
 * the host controller implementation.
 *
 * To facilitate the strongest possible byte-order checking from "sparse"
 * and so on, we use __leXX unless that's not practical.
 */
#define __hc32  __le32
#define __hc16  __le16

/* statistics can be kept for tuning/monitoring */
struct fotg210_stats {
        /* irq usage */
        unsigned long           normal;
        unsigned long           error;
        unsigned long           iaa;
        unsigned long           lost_iaa;

        /* termination of urbs from core */
        unsigned long           complete;
        unsigned long           unlink;
};

/* fotg210_hcd->lock guards shared data against other CPUs:
 *   fotg210_hcd:       async, unlink, periodic (and shadow), ...
 *   usb_host_endpoint: hcpriv
 *   fotg210_qh:        qh_next, qtd_list
 *   fotg210_qtd:       qtd_list
 *
 * Also, hold this lock when talking to HC registers or
 * when updating hw_* fields in shared qh/qtd/... structures.
 */

#define FOTG210_MAX_ROOT_PORTS  1               /* see HCS_N_PORTS */

/*
 * fotg210_rh_state values of FOTG210_RH_RUNNING or above mean that the
 * controller may be doing DMA.  Lower values mean there's no DMA.
 */
enum fotg210_rh_state {
        FOTG210_RH_HALTED,
        FOTG210_RH_SUSPENDED,
        FOTG210_RH_RUNNING,
        FOTG210_RH_STOPPING
};

/*
 * Timer events, ordered by increasing delay length.
 * Always update event_delays_ns[] and event_handlers[] (defined in
 * ehci-timer.c) in parallel with this list.
 */
enum fotg210_hrtimer_event {
        FOTG210_HRTIMER_POLL_ASS,       /* Poll for async schedule off */
        FOTG210_HRTIMER_POLL_PSS,       /* Poll for periodic schedule off */
        FOTG210_HRTIMER_POLL_DEAD,      /* Wait for dead controller to stop */
        FOTG210_HRTIMER_UNLINK_INTR,    /* Wait for interrupt QH unlink */
        FOTG210_HRTIMER_FREE_ITDS,      /* Wait for unused iTDs and siTDs */
        FOTG210_HRTIMER_ASYNC_UNLINKS,  /* Unlink empty async QHs */
        FOTG210_HRTIMER_IAA_WATCHDOG,   /* Handle lost IAA interrupts */
        FOTG210_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
        FOTG210_HRTIMER_DISABLE_ASYNC,  /* Wait to disable async sched */
        FOTG210_HRTIMER_IO_WATCHDOG,    /* Check for missing IRQs */
        FOTG210_HRTIMER_NUM_EVENTS      /* Must come last */
};
#define FOTG210_HRTIMER_NO_EVENT        99

struct fotg210_hcd {                    /* one per controller */
        /* timing support */
        enum fotg210_hrtimer_event      next_hrtimer_event;
        unsigned                enabled_hrtimer_events;
        ktime_t                 hr_timeouts[FOTG210_HRTIMER_NUM_EVENTS];
        struct hrtimer          hrtimer;

        int                     PSS_poll_count;
        int                     ASS_poll_count;
        int                     died_poll_count;

        /* glue to PCI and HCD framework */
        struct fotg210_caps __iomem *caps;
        struct fotg210_regs __iomem *regs;
        struct ehci_dbg_port __iomem *debug;

        __u32                   hcs_params;     /* cached register copy */
        spinlock_t              lock;
        enum fotg210_rh_state   rh_state;

        /* general schedule support */
        bool                    scanning:1;
        bool                    need_rescan:1;
        bool                    intr_unlinking:1;
        bool                    async_unlinking:1;
        bool                    shutdown:1;
        struct fotg210_qh               *qh_scan_next;

        /* async schedule support */
        struct fotg210_qh               *async;
        struct fotg210_qh               *dummy;         /* For AMD quirk use */
        struct fotg210_qh               *async_unlink;
        struct fotg210_qh               *async_unlink_last;
        struct fotg210_qh               *async_iaa;
        unsigned                async_unlink_cycle;
        unsigned                async_count;    /* async activity count */

        /* periodic schedule support */
#define DEFAULT_I_TDPS          1024            /* some HCs can do less */
        unsigned                periodic_size;
        __hc32                  *periodic;      /* hw periodic table */
        dma_addr_t              periodic_dma;
        struct list_head        intr_qh_list;
        unsigned                i_thresh;       /* uframes HC might cache */

        union fotg210_shadow    *pshadow;       /* mirror hw periodic table */
        struct fotg210_qh               *intr_unlink;
        struct fotg210_qh               *intr_unlink_last;
        unsigned                intr_unlink_cycle;
        unsigned                now_frame;      /* frame from HC hardware */
        unsigned                next_frame;     /* scan periodic, start here */
        unsigned                intr_count;     /* intr activity count */
        unsigned                isoc_count;     /* isoc activity count */
        unsigned                periodic_count; /* periodic activity count */
        /* max periodic time per uframe */
        unsigned                uframe_periodic_max;


        /* list of itds completed while now_frame was still active */
        struct list_head        cached_itd_list;
        struct fotg210_itd      *last_itd_to_free;

        /* per root hub port */
        unsigned long           reset_done[FOTG210_MAX_ROOT_PORTS];

        /* bit vectors (one bit per port)
         * which ports were already suspended at the start of a bus suspend
         */
        unsigned long           bus_suspended;

        /* which ports are edicated to the companion controller */
        unsigned long           companion_ports;

        /* which ports are owned by the companion during a bus suspend */
        unsigned long           owned_ports;

        /* which ports have the change-suspend feature turned on */
        unsigned long           port_c_suspend;

        /* which ports are suspended */
        unsigned long           suspended_ports;

        /* which ports have started to resume */
        unsigned long           resuming_ports;

        /* per-HC memory pools (could be per-bus, but ...) */
        struct dma_pool         *qh_pool;       /* qh per active urb */
        struct dma_pool         *qtd_pool;      /* one or more per qh */
        struct dma_pool         *itd_pool;      /* itd per iso urb */

        unsigned                random_frame;
        unsigned long           next_statechange;
        ktime_t                 last_periodic_enable;
        u32                     command;

        /* SILICON QUIRKS */
        unsigned                need_io_watchdog:1;
        unsigned                fs_i_thresh:1;  /* Intel iso scheduling */

        u8                      sbrn;           /* packed release number */

        /* irq statistics */
#ifdef FOTG210_STATS
        struct fotg210_stats    stats;
#       define COUNT(x) ((x)++)
#else
#       define COUNT(x)
#endif

        /* debug files */
        struct dentry           *debug_dir;
};

/* convert between an HCD pointer and the corresponding FOTG210_HCD */
static inline struct fotg210_hcd *hcd_to_fotg210(struct usb_hcd *hcd)
{
        return (struct fotg210_hcd *)(hcd->hcd_priv);
}
static inline struct usb_hcd *fotg210_to_hcd(struct fotg210_hcd *fotg210)
{
        return container_of((void *) fotg210, struct usb_hcd, hcd_priv);
}

/*-------------------------------------------------------------------------*/

/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */

/* Section 2.2 Host Controller Capability Registers */
struct fotg210_caps {
        /* these fields are specified as 8 and 16 bit registers,
         * but some hosts can't perform 8 or 16 bit PCI accesses.
         * some hosts treat caplength and hciversion as parts of a 32-bit
         * register, others treat them as two separate registers, this
         * affects the memory map for big endian controllers.
         */
        u32             hc_capbase;
#define HC_LENGTH(fotg210, p)   (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
                                (fotg210_big_endian_capbase(fotg210) ? 24 : 0)))
#define HC_VERSION(fotg210, p)  (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
                                (fotg210_big_endian_capbase(fotg210) ? 0 : 16)))
        u32             hcs_params;     /* HCSPARAMS - offset 0x4 */
#define HCS_N_PORTS(p)          (((p)>>0)&0xf)  /* bits 3:0, ports on HC */

        u32             hcc_params;     /* HCCPARAMS - offset 0x8 */
#define HCC_CANPARK(p)          ((p)&(1 << 2))  /* true: can park on async qh */
#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
        u8              portroute[8];    /* nibbles for routing - offset 0xC */
};


/* Section 2.3 Host Controller Operational Registers */
struct fotg210_regs {

        /* USBCMD: offset 0x00 */
        u32             command;

/* EHCI 1.1 addendum */
/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
#define CMD_PARK        (1<<11)         /* enable "park" on async qh */
#define CMD_PARK_CNT(c) (((c)>>8)&3)    /* how many transfers to park for */
#define CMD_IAAD        (1<<6)          /* "doorbell" interrupt async advance */
#define CMD_ASE         (1<<5)          /* async schedule enable */
#define CMD_PSE         (1<<4)          /* periodic schedule enable */
/* 3:2 is periodic frame list size */
#define CMD_RESET       (1<<1)          /* reset HC not bus */
#define CMD_RUN         (1<<0)          /* start/stop HC */

        /* USBSTS: offset 0x04 */
        u32             status;
#define STS_ASS         (1<<15)         /* Async Schedule Status */
#define STS_PSS         (1<<14)         /* Periodic Schedule Status */
#define STS_RECL        (1<<13)         /* Reclamation */
#define STS_HALT        (1<<12)         /* Not running (any reason) */
/* some bits reserved */
        /* these STS_* flags are also intr_enable bits (USBINTR) */
#define STS_IAA         (1<<5)          /* Interrupted on async advance */
#define STS_FATAL       (1<<4)          /* such as some PCI access errors */
#define STS_FLR         (1<<3)          /* frame list rolled over */
#define STS_PCD         (1<<2)          /* port change detect */
#define STS_ERR         (1<<1)          /* "error" completion (overflow, ...) */
#define STS_INT         (1<<0)          /* "normal" completion (short, ...) */

        /* USBINTR: offset 0x08 */
        u32             intr_enable;

        /* FRINDEX: offset 0x0C */
        u32             frame_index;    /* current microframe number */
        /* CTRLDSSEGMENT: offset 0x10 */
        u32             segment;        /* address bits 63:32 if needed */
        /* PERIODICLISTBASE: offset 0x14 */
        u32             frame_list;     /* points to periodic list */
        /* ASYNCLISTADDR: offset 0x18 */
        u32             async_next;     /* address of next async queue head */

        u32     reserved1;
        /* PORTSC: offset 0x20 */
        u32     port_status;
/* 31:23 reserved */
#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))        /* USB 1.1 device */
#define PORT_RESET      (1<<8)          /* reset port */
#define PORT_SUSPEND    (1<<7)          /* suspend port */
#define PORT_RESUME     (1<<6)          /* resume it */
#define PORT_PEC        (1<<3)          /* port enable change */
#define PORT_PE         (1<<2)          /* port enable */
#define PORT_CSC        (1<<1)          /* connect status change */
#define PORT_CONNECT    (1<<0)          /* device connected */
#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC)
        u32     reserved2[19];

        /* OTGCSR: offet 0x70 */
        u32     otgcsr;
#define OTGCSR_HOST_SPD_TYP     (3 << 22)
#define OTGCSR_A_BUS_DROP       (1 << 5)
#define OTGCSR_A_BUS_REQ        (1 << 4)

        /* OTGISR: offset 0x74 */
        u32     otgisr;
#define OTGISR_OVC      (1 << 10)

        u32     reserved3[15];

        /* GMIR: offset 0xB4 */
        u32     gmir;
#define GMIR_INT_POLARITY       (1 << 3) /*Active High*/
#define GMIR_MHC_INT            (1 << 2)
#define GMIR_MOTG_INT           (1 << 1)
#define GMIR_MDEV_INT   (1 << 0)
};

/*-------------------------------------------------------------------------*/

#define QTD_NEXT(fotg210, dma)  cpu_to_hc32(fotg210, (u32)dma)

/*
 * EHCI Specification 0.95 Section 3.5
 * QTD: describe data transfer components (buffer, direction, ...)
 * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
 *
 * These are associated only with "QH" (Queue Head) structures,
 * used with control, bulk, and interrupt transfers.
 */
struct fotg210_qtd {
        /* first part defined by EHCI spec */
        __hc32                  hw_next;        /* see EHCI 3.5.1 */
        __hc32                  hw_alt_next;    /* see EHCI 3.5.2 */
        __hc32                  hw_token;       /* see EHCI 3.5.3 */
#define QTD_TOGGLE      (1 << 31)       /* data toggle */
#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
#define QTD_IOC         (1 << 15)       /* interrupt on complete */
#define QTD_CERR(tok)   (((tok)>>10) & 0x3)
#define QTD_PID(tok)    (((tok)>>8) & 0x3)
#define QTD_STS_ACTIVE  (1 << 7)        /* HC may execute this */
#define QTD_STS_HALT    (1 << 6)        /* halted on error */
#define QTD_STS_DBE     (1 << 5)        /* data buffer error (in HC) */
#define QTD_STS_BABBLE  (1 << 4)        /* device was babbling (qtd halted) */
#define QTD_STS_XACT    (1 << 3)        /* device gave illegal response */
#define QTD_STS_MMF     (1 << 2)        /* incomplete split transaction */
#define QTD_STS_STS     (1 << 1)        /* split transaction state */
#define QTD_STS_PING    (1 << 0)        /* issue PING? */

#define ACTIVE_BIT(fotg210)     cpu_to_hc32(fotg210, QTD_STS_ACTIVE)
#define HALT_BIT(fotg210)               cpu_to_hc32(fotg210, QTD_STS_HALT)
#define STATUS_BIT(fotg210)     cpu_to_hc32(fotg210, QTD_STS_STS)

        __hc32                  hw_buf[5];      /* see EHCI 3.5.4 */
        __hc32                  hw_buf_hi[5];   /* Appendix B */

        /* the rest is HCD-private */
        dma_addr_t              qtd_dma;                /* qtd address */
        struct list_head        qtd_list;               /* sw qtd list */
        struct urb              *urb;                   /* qtd's urb */
        size_t                  length;                 /* length of buffer */
} __aligned(32);

/* mask NakCnt+T in qh->hw_alt_next */
#define QTD_MASK(fotg210)       cpu_to_hc32(fotg210, ~0x1f)

#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)

/*-------------------------------------------------------------------------*/

/* type tag from {qh,itd,fstn}->hw_next */
#define Q_NEXT_TYPE(fotg210, dma)       ((dma) & cpu_to_hc32(fotg210, 3 << 1))

/*
 * Now the following defines are not converted using the
 * cpu_to_le32() macro anymore, since we have to support
 * "dynamic" switching between be and le support, so that the driver
 * can be used on one system with SoC EHCI controller using big-endian
 * descriptors as well as a normal little-endian PCI EHCI controller.
 */
/* values for that type tag */
#define Q_TYPE_ITD      (0 << 1)
#define Q_TYPE_QH       (1 << 1)
#define Q_TYPE_SITD     (2 << 1)
#define Q_TYPE_FSTN     (3 << 1)

/* next async queue entry, or pointer to interrupt/periodic QH */
#define QH_NEXT(fotg210, dma) \
        (cpu_to_hc32(fotg210, (((u32)dma)&~0x01f)|Q_TYPE_QH))

/* for periodic/async schedules and qtd lists, mark end of list */
#define FOTG210_LIST_END(fotg210) \
        cpu_to_hc32(fotg210, 1) /* "null pointer" to hw */

/*
 * Entries in periodic shadow table are pointers to one of four kinds
 * of data structure.  That's dictated by the hardware; a type tag is
 * encoded in the low bits of the hardware's periodic schedule.  Use
 * Q_NEXT_TYPE to get the tag.
 *
 * For entries in the async schedule, the type tag always says "qh".
 */
union fotg210_shadow {
        struct fotg210_qh       *qh;            /* Q_TYPE_QH */
        struct fotg210_itd      *itd;           /* Q_TYPE_ITD */
        struct fotg210_fstn     *fstn;          /* Q_TYPE_FSTN */
        __hc32                  *hw_next;       /* (all types) */
        void                    *ptr;
};

/*-------------------------------------------------------------------------*/

/*
 * EHCI Specification 0.95 Section 3.6
 * QH: describes control/bulk/interrupt endpoints
 * See Fig 3-7 "Queue Head Structure Layout".
 *
 * These appear in both the async and (for interrupt) periodic schedules.
 */

/* first part defined by EHCI spec */
struct fotg210_qh_hw {
        __hc32                  hw_next;        /* see EHCI 3.6.1 */
        __hc32                  hw_info1;       /* see EHCI 3.6.2 */
#define QH_CONTROL_EP   (1 << 27)       /* FS/LS control endpoint */
#define QH_HEAD         (1 << 15)       /* Head of async reclamation list */
#define QH_TOGGLE_CTL   (1 << 14)       /* Data toggle control */
#define QH_HIGH_SPEED   (2 << 12)       /* Endpoint speed */
#define QH_LOW_SPEED    (1 << 12)
#define QH_FULL_SPEED   (0 << 12)
#define QH_INACTIVATE   (1 << 7)        /* Inactivate on next transaction */
        __hc32                  hw_info2;       /* see EHCI 3.6.2 */
#define QH_SMASK        0x000000ff
#define QH_CMASK        0x0000ff00
#define QH_HUBADDR      0x007f0000
#define QH_HUBPORT      0x3f800000
#define QH_MULT         0xc0000000
        __hc32                  hw_current;     /* qtd list - see EHCI 3.6.4 */

        /* qtd overlay (hardware parts of a struct fotg210_qtd) */
        __hc32                  hw_qtd_next;
        __hc32                  hw_alt_next;
        __hc32                  hw_token;
        __hc32                  hw_buf[5];
        __hc32                  hw_buf_hi[5];
} __aligned(32);

struct fotg210_qh {
        struct fotg210_qh_hw    *hw;            /* Must come first */
        /* the rest is HCD-private */
        dma_addr_t              qh_dma;         /* address of qh */
        union fotg210_shadow    qh_next;        /* ptr to qh; or periodic */
        struct list_head        qtd_list;       /* sw qtd list */
        struct list_head        intr_node;      /* list of intr QHs */
        struct fotg210_qtd      *dummy;
        struct fotg210_qh       *unlink_next;   /* next on unlink list */

        unsigned                unlink_cycle;

        u8                      needs_rescan;   /* Dequeue during giveback */
        u8                      qh_state;
#define QH_STATE_LINKED         1               /* HC sees this */
#define QH_STATE_UNLINK         2               /* HC may still see this */
#define QH_STATE_IDLE           3               /* HC doesn't see this */
#define QH_STATE_UNLINK_WAIT    4               /* LINKED and on unlink q */
#define QH_STATE_COMPLETING     5               /* don't touch token.HALT */

        u8                      xacterrs;       /* XactErr retry counter */
#define QH_XACTERR_MAX          32              /* XactErr retry limit */

        /* periodic schedule info */
        u8                      usecs;          /* intr bandwidth */
        u8                      gap_uf;         /* uframes split/csplit gap */
        u8                      c_usecs;        /* ... split completion bw */
        u16                     tt_usecs;       /* tt downstream bandwidth */
        unsigned short          period;         /* polling interval */
        unsigned short          start;          /* where polling starts */
#define NO_FRAME ((unsigned short)~0)                   /* pick new start */

        struct usb_device       *dev;           /* access to TT */
        unsigned                is_out:1;       /* bulk or intr OUT */
        unsigned                clearing_tt:1;  /* Clear-TT-Buf in progress */
};

/*-------------------------------------------------------------------------*/

/* description of one iso transaction (up to 3 KB data if highspeed) */
struct fotg210_iso_packet {
        /* These will be copied to iTD when scheduling */
        u64                     bufp;           /* itd->hw_bufp{,_hi}[pg] |= */
        __hc32                  transaction;    /* itd->hw_transaction[i] |= */
        u8                      cross;          /* buf crosses pages */
        /* for full speed OUT splits */
        u32                     buf1;
};

/* temporary schedule data for packets from iso urbs (both speeds)
 * each packet is one logical usb transaction to the device (not TT),
 * beginning at stream->next_uframe
 */
struct fotg210_iso_sched {
        struct list_head        td_list;
        unsigned                span;
        struct fotg210_iso_packet       packet[0];
};

/*
 * fotg210_iso_stream - groups all (s)itds for this endpoint.
 * acts like a qh would, if EHCI had them for ISO.
 */
struct fotg210_iso_stream {
        /* first field matches fotg210_hq, but is NULL */
        struct fotg210_qh_hw    *hw;

        u8                      bEndpointAddress;
        u8                      highspeed;
        struct list_head        td_list;        /* queued itds */
        struct list_head        free_list;      /* list of unused itds */
        struct usb_device       *udev;
        struct usb_host_endpoint *ep;

        /* output of (re)scheduling */
        int                     next_uframe;
        __hc32                  splits;

        /* the rest is derived from the endpoint descriptor,
         * trusting urb->interval == f(epdesc->bInterval) and
         * including the extra info for hw_bufp[0..2]
         */
        u8                      usecs, c_usecs;
        u16                     interval;
        u16                     tt_usecs;
        u16                     maxp;
        u16                     raw_mask;
        unsigned                bandwidth;

        /* This is used to initialize iTD's hw_bufp fields */
        __hc32                  buf0;
        __hc32                  buf1;
        __hc32                  buf2;

        /* this is used to initialize sITD's tt info */
        __hc32                  address;
};

/*-------------------------------------------------------------------------*/

/*
 * EHCI Specification 0.95 Section 3.3
 * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
 *
 * Schedule records for high speed iso xfers
 */
struct fotg210_itd {
        /* first part defined by EHCI spec */
        __hc32                  hw_next;        /* see EHCI 3.3.1 */
        __hc32                  hw_transaction[8]; /* see EHCI 3.3.2 */
#define FOTG210_ISOC_ACTIVE     (1<<31) /* activate transfer this slot */
#define FOTG210_ISOC_BUF_ERR    (1<<30) /* Data buffer error */
#define FOTG210_ISOC_BABBLE     (1<<29) /* babble detected */
#define FOTG210_ISOC_XACTERR    (1<<28) /* XactErr - transaction error */
#define FOTG210_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
#define FOTG210_ITD_IOC         (1 << 15)       /* interrupt on complete */

#define ITD_ACTIVE(fotg210)     cpu_to_hc32(fotg210, FOTG210_ISOC_ACTIVE)

        __hc32                  hw_bufp[7];     /* see EHCI 3.3.3 */
        __hc32                  hw_bufp_hi[7];  /* Appendix B */

        /* the rest is HCD-private */
        dma_addr_t              itd_dma;        /* for this itd */
        union fotg210_shadow    itd_next;       /* ptr to periodic q entry */

        struct urb              *urb;
        struct fotg210_iso_stream       *stream;        /* endpoint's queue */
        struct list_head        itd_list;       /* list of stream's itds */

        /* any/all hw_transactions here may be used by that urb */
        unsigned                frame;          /* where scheduled */
        unsigned                pg;
        unsigned                index[8];       /* in urb->iso_frame_desc */
} __aligned(32);

/*-------------------------------------------------------------------------*/

/*
 * EHCI Specification 0.96 Section 3.7
 * Periodic Frame Span Traversal Node (FSTN)
 *
 * Manages split interrupt transactions (using TT) that span frame boundaries
 * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
 * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
 * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
 */
struct fotg210_fstn {
        __hc32                  hw_next;        /* any periodic q entry */
        __hc32                  hw_prev;        /* qh or FOTG210_LIST_END */

        /* the rest is HCD-private */
        dma_addr_t              fstn_dma;
        union fotg210_shadow    fstn_next;      /* ptr to periodic q entry */
} __aligned(32);

/*-------------------------------------------------------------------------*/

/* Prepare the PORTSC wakeup flags during controller suspend/resume */

#define fotg210_prepare_ports_for_controller_suspend(fotg210, do_wakeup) \
                fotg210_adjust_port_wakeup_flags(fotg210, true, do_wakeup)

#define fotg210_prepare_ports_for_controller_resume(fotg210)            \
                fotg210_adjust_port_wakeup_flags(fotg210, false, false)

/*-------------------------------------------------------------------------*/

/*
 * Some EHCI controllers have a Transaction Translator built into the
 * root hub. This is a non-standard feature.  Each controller will need
 * to add code to the following inline functions, and call them as
 * needed (mostly in root hub code).
 */

static inline unsigned int
fotg210_get_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
{
        return (readl(&fotg210->regs->otgcsr)
                & OTGCSR_HOST_SPD_TYP) >> 22;
}

/* Returns the speed of a device attached to a port on the root hub. */
static inline unsigned int
fotg210_port_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
{
        switch (fotg210_get_speed(fotg210, portsc)) {
        case 0:
                return 0;
        case 1:
                return USB_PORT_STAT_LOW_SPEED;
        case 2:
        default:
                return USB_PORT_STAT_HIGH_SPEED;
        }
}

/*-------------------------------------------------------------------------*/

#define fotg210_has_fsl_portno_bug(e)           (0)

/*
 * While most USB host controllers implement their registers in
 * little-endian format, a minority (celleb companion chip) implement
 * them in big endian format.
 *
 * This attempts to support either format at compile time without a
 * runtime penalty, or both formats with the additional overhead
 * of checking a flag bit.
 *
 */

#define fotg210_big_endian_mmio(e)      0
#define fotg210_big_endian_capbase(e)   0

static inline unsigned int fotg210_readl(const struct fotg210_hcd *fotg210,
                __u32 __iomem *regs)
{
        return readl(regs);
}

static inline void fotg210_writel(const struct fotg210_hcd *fotg210,
                const unsigned int val, __u32 __iomem *regs)
{
        writel(val, regs);
}

/* cpu to fotg210 */
static inline __hc32 cpu_to_hc32(const struct fotg210_hcd *fotg210, const u32 x)
{
        return cpu_to_le32(x);
}

/* fotg210 to cpu */
static inline u32 hc32_to_cpu(const struct fotg210_hcd *fotg210, const __hc32 x)
{
        return le32_to_cpu(x);
}

static inline u32 hc32_to_cpup(const struct fotg210_hcd *fotg210,
                               const __hc32 *x)
{
        return le32_to_cpup(x);
}

/*-------------------------------------------------------------------------*/

static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
{
        return fotg210_readl(fotg210, &fotg210->regs->frame_index);
}

#define fotg210_itdlen(urb, desc, t) ({                 \
        usb_pipein((urb)->pipe) ?                               \
        (desc)->length - FOTG210_ITD_LENGTH(t) :                        \
        FOTG210_ITD_LENGTH(t);                                  \
})
/*-------------------------------------------------------------------------*/

#endif /* __LINUX_FOTG210_H */