linux/drivers/usb/serial/oti6858.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
   4 *
   5 * Copyleft  (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
   6 * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
   7 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
   8 * Copyright (C) 2003 IBM Corp.
   9 *
  10 * Many thanks to the authors of pl2303 driver: all functions in this file
  11 * are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
  12 *
  13 * Warning! You use this driver on your own risk! The only official
  14 * description of this device I have is datasheet from manufacturer,
  15 * and it doesn't contain almost any information needed to write a driver.
  16 * Almost all knowlegde used while writing this driver was gathered by:
  17 *  - analyzing traffic between device and the M$ Windows 2000 driver,
  18 *  - trying different bit combinations and checking pin states
  19 *    with a voltmeter,
  20 *  - receiving malformed frames and producing buffer overflows
  21 *    to learn how errors are reported,
  22 * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
  23 * CONNECTED TO IT!
  24 *
  25 * See Documentation/usb/usb-serial.txt for more information on using this
  26 * driver
  27 *
  28 * TODO:
  29 *  - implement correct flushing for ioctls and oti6858_close()
  30 *  - check how errors (rx overflow, parity error, framing error) are reported
  31 *  - implement oti6858_break_ctl()
  32 *  - implement more ioctls
  33 *  - test/implement flow control
  34 *  - allow setting custom baud rates
  35 */
  36
  37#include <linux/kernel.h>
  38#include <linux/errno.h>
  39#include <linux/slab.h>
  40#include <linux/tty.h>
  41#include <linux/tty_driver.h>
  42#include <linux/tty_flip.h>
  43#include <linux/serial.h>
  44#include <linux/module.h>
  45#include <linux/moduleparam.h>
  46#include <linux/spinlock.h>
  47#include <linux/usb.h>
  48#include <linux/usb/serial.h>
  49#include <linux/uaccess.h>
  50#include <linux/kfifo.h>
  51#include "oti6858.h"
  52
  53#define OTI6858_DESCRIPTION \
  54        "Ours Technology Inc. OTi-6858 USB to serial adapter driver"
  55#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
  56
  57static const struct usb_device_id id_table[] = {
  58        { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
  59        { }
  60};
  61
  62MODULE_DEVICE_TABLE(usb, id_table);
  63
  64/* requests */
  65#define OTI6858_REQ_GET_STATUS          (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
  66#define OTI6858_REQ_T_GET_STATUS        0x01
  67
  68#define OTI6858_REQ_SET_LINE            (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
  69#define OTI6858_REQ_T_SET_LINE          0x00
  70
  71#define OTI6858_REQ_CHECK_TXBUFF        (USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
  72#define OTI6858_REQ_T_CHECK_TXBUFF      0x00
  73
  74/* format of the control packet */
  75struct oti6858_control_pkt {
  76        __le16  divisor;        /* baud rate = 96000000 / (16 * divisor), LE */
  77#define OTI6858_MAX_BAUD_RATE   3000000
  78        u8      frame_fmt;
  79#define FMT_STOP_BITS_MASK      0xc0
  80#define FMT_STOP_BITS_1         0x00
  81#define FMT_STOP_BITS_2         0x40    /* 1.5 stop bits if FMT_DATA_BITS_5 */
  82#define FMT_PARITY_MASK         0x38
  83#define FMT_PARITY_NONE         0x00
  84#define FMT_PARITY_ODD          0x08
  85#define FMT_PARITY_EVEN         0x18
  86#define FMT_PARITY_MARK         0x28
  87#define FMT_PARITY_SPACE        0x38
  88#define FMT_DATA_BITS_MASK      0x03
  89#define FMT_DATA_BITS_5         0x00
  90#define FMT_DATA_BITS_6         0x01
  91#define FMT_DATA_BITS_7         0x02
  92#define FMT_DATA_BITS_8         0x03
  93        u8      something;      /* always equals 0x43 */
  94        u8      control;        /* settings of flow control lines */
  95#define CONTROL_MASK            0x0c
  96#define CONTROL_DTR_HIGH        0x08
  97#define CONTROL_RTS_HIGH        0x04
  98        u8      tx_status;
  99#define TX_BUFFER_EMPTIED       0x09
 100        u8      pin_state;
 101#define PIN_MASK                0x3f
 102#define PIN_MSR_MASK            0x1b
 103#define PIN_RTS                 0x20    /* output pin */
 104#define PIN_CTS                 0x10    /* input pin, active low */
 105#define PIN_DSR                 0x08    /* input pin, active low */
 106#define PIN_DTR                 0x04    /* output pin */
 107#define PIN_RI                  0x02    /* input pin, active low */
 108#define PIN_DCD                 0x01    /* input pin, active low */
 109        u8      rx_bytes_avail;         /* number of bytes in rx buffer */;
 110};
 111
 112#define OTI6858_CTRL_PKT_SIZE   sizeof(struct oti6858_control_pkt)
 113#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
 114        (((a)->divisor == (priv)->pending_setup.divisor) \
 115          && ((a)->control == (priv)->pending_setup.control) \
 116          && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 117
 118/* function prototypes */
 119static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 120static void oti6858_close(struct usb_serial_port *port);
 121static void oti6858_set_termios(struct tty_struct *tty,
 122                        struct usb_serial_port *port, struct ktermios *old);
 123static void oti6858_init_termios(struct tty_struct *tty);
 124static void oti6858_read_int_callback(struct urb *urb);
 125static void oti6858_read_bulk_callback(struct urb *urb);
 126static void oti6858_write_bulk_callback(struct urb *urb);
 127static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 128                        const unsigned char *buf, int count);
 129static int oti6858_write_room(struct tty_struct *tty);
 130static int oti6858_chars_in_buffer(struct tty_struct *tty);
 131static int oti6858_tiocmget(struct tty_struct *tty);
 132static int oti6858_tiocmset(struct tty_struct *tty,
 133                                unsigned int set, unsigned int clear);
 134static int oti6858_port_probe(struct usb_serial_port *port);
 135static int oti6858_port_remove(struct usb_serial_port *port);
 136
 137/* device info */
 138static struct usb_serial_driver oti6858_device = {
 139        .driver = {
 140                .owner =        THIS_MODULE,
 141                .name =         "oti6858",
 142        },
 143        .id_table =             id_table,
 144        .num_ports =            1,
 145        .num_bulk_in =          1,
 146        .num_bulk_out =         1,
 147        .num_interrupt_in =     1,
 148        .open =                 oti6858_open,
 149        .close =                oti6858_close,
 150        .write =                oti6858_write,
 151        .set_termios =          oti6858_set_termios,
 152        .init_termios =         oti6858_init_termios,
 153        .tiocmget =             oti6858_tiocmget,
 154        .tiocmset =             oti6858_tiocmset,
 155        .tiocmiwait =           usb_serial_generic_tiocmiwait,
 156        .read_bulk_callback =   oti6858_read_bulk_callback,
 157        .read_int_callback =    oti6858_read_int_callback,
 158        .write_bulk_callback =  oti6858_write_bulk_callback,
 159        .write_room =           oti6858_write_room,
 160        .chars_in_buffer =      oti6858_chars_in_buffer,
 161        .port_probe =           oti6858_port_probe,
 162        .port_remove =          oti6858_port_remove,
 163};
 164
 165static struct usb_serial_driver * const serial_drivers[] = {
 166        &oti6858_device, NULL
 167};
 168
 169struct oti6858_private {
 170        spinlock_t lock;
 171
 172        struct oti6858_control_pkt status;
 173
 174        struct {
 175                u8 read_urb_in_use;
 176                u8 write_urb_in_use;
 177        } flags;
 178        struct delayed_work delayed_write_work;
 179
 180        struct {
 181                __le16 divisor;
 182                u8 frame_fmt;
 183                u8 control;
 184        } pending_setup;
 185        u8 transient;
 186        u8 setup_done;
 187        struct delayed_work delayed_setup_work;
 188
 189        struct usb_serial_port *port;   /* USB port with which associated */
 190};
 191
 192static void setup_line(struct work_struct *work)
 193{
 194        struct oti6858_private *priv = container_of(work,
 195                        struct oti6858_private, delayed_setup_work.work);
 196        struct usb_serial_port *port = priv->port;
 197        struct oti6858_control_pkt *new_setup;
 198        unsigned long flags;
 199        int result;
 200
 201        new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 202        if (!new_setup) {
 203                /* we will try again */
 204                schedule_delayed_work(&priv->delayed_setup_work,
 205                                                msecs_to_jiffies(2));
 206                return;
 207        }
 208
 209        result = usb_control_msg(port->serial->dev,
 210                                usb_rcvctrlpipe(port->serial->dev, 0),
 211                                OTI6858_REQ_T_GET_STATUS,
 212                                OTI6858_REQ_GET_STATUS,
 213                                0, 0,
 214                                new_setup, OTI6858_CTRL_PKT_SIZE,
 215                                100);
 216
 217        if (result != OTI6858_CTRL_PKT_SIZE) {
 218                dev_err(&port->dev, "%s(): error reading status\n", __func__);
 219                kfree(new_setup);
 220                /* we will try again */
 221                schedule_delayed_work(&priv->delayed_setup_work,
 222                                                        msecs_to_jiffies(2));
 223                return;
 224        }
 225
 226        spin_lock_irqsave(&priv->lock, flags);
 227        if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
 228                new_setup->divisor = priv->pending_setup.divisor;
 229                new_setup->control = priv->pending_setup.control;
 230                new_setup->frame_fmt = priv->pending_setup.frame_fmt;
 231
 232                spin_unlock_irqrestore(&priv->lock, flags);
 233                result = usb_control_msg(port->serial->dev,
 234                                        usb_sndctrlpipe(port->serial->dev, 0),
 235                                        OTI6858_REQ_T_SET_LINE,
 236                                        OTI6858_REQ_SET_LINE,
 237                                        0, 0,
 238                                        new_setup, OTI6858_CTRL_PKT_SIZE,
 239                                        100);
 240        } else {
 241                spin_unlock_irqrestore(&priv->lock, flags);
 242                result = 0;
 243        }
 244        kfree(new_setup);
 245
 246        spin_lock_irqsave(&priv->lock, flags);
 247        if (result != OTI6858_CTRL_PKT_SIZE)
 248                priv->transient = 0;
 249        priv->setup_done = 1;
 250        spin_unlock_irqrestore(&priv->lock, flags);
 251
 252        dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
 253        result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 254        if (result != 0) {
 255                dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
 256                        __func__, result);
 257        }
 258}
 259
 260static void send_data(struct work_struct *work)
 261{
 262        struct oti6858_private *priv = container_of(work,
 263                        struct oti6858_private, delayed_write_work.work);
 264        struct usb_serial_port *port = priv->port;
 265        int count = 0, result;
 266        unsigned long flags;
 267        u8 *allow;
 268
 269        spin_lock_irqsave(&priv->lock, flags);
 270        if (priv->flags.write_urb_in_use) {
 271                spin_unlock_irqrestore(&priv->lock, flags);
 272                schedule_delayed_work(&priv->delayed_write_work,
 273                                                msecs_to_jiffies(2));
 274                return;
 275        }
 276        priv->flags.write_urb_in_use = 1;
 277        spin_unlock_irqrestore(&priv->lock, flags);
 278
 279        spin_lock_irqsave(&port->lock, flags);
 280        count = kfifo_len(&port->write_fifo);
 281        spin_unlock_irqrestore(&port->lock, flags);
 282
 283        if (count > port->bulk_out_size)
 284                count = port->bulk_out_size;
 285
 286        if (count != 0) {
 287                allow = kmalloc(1, GFP_KERNEL);
 288                if (!allow)
 289                        return;
 290
 291                result = usb_control_msg(port->serial->dev,
 292                                usb_rcvctrlpipe(port->serial->dev, 0),
 293                                OTI6858_REQ_T_CHECK_TXBUFF,
 294                                OTI6858_REQ_CHECK_TXBUFF,
 295                                count, 0, allow, 1, 100);
 296                if (result != 1 || *allow != 0)
 297                        count = 0;
 298                kfree(allow);
 299        }
 300
 301        if (count == 0) {
 302                priv->flags.write_urb_in_use = 0;
 303
 304                dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
 305                result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 306                if (result != 0) {
 307                        dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
 308                                __func__, result);
 309                }
 310                return;
 311        }
 312
 313        count = kfifo_out_locked(&port->write_fifo,
 314                                        port->write_urb->transfer_buffer,
 315                                        count, &port->lock);
 316        port->write_urb->transfer_buffer_length = count;
 317        result = usb_submit_urb(port->write_urb, GFP_NOIO);
 318        if (result != 0) {
 319                dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n",
 320                                __func__, result);
 321                priv->flags.write_urb_in_use = 0;
 322        }
 323
 324        usb_serial_port_softint(port);
 325}
 326
 327static int oti6858_port_probe(struct usb_serial_port *port)
 328{
 329        struct oti6858_private *priv;
 330
 331        priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 332        if (!priv)
 333                return -ENOMEM;
 334
 335        spin_lock_init(&priv->lock);
 336        priv->port = port;
 337        INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
 338        INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
 339
 340        usb_set_serial_port_data(port, priv);
 341
 342        port->port.drain_delay = 256;   /* FIXME: check the FIFO length */
 343
 344        return 0;
 345}
 346
 347static int oti6858_port_remove(struct usb_serial_port *port)
 348{
 349        struct oti6858_private *priv;
 350
 351        priv = usb_get_serial_port_data(port);
 352        kfree(priv);
 353
 354        return 0;
 355}
 356
 357static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 358                        const unsigned char *buf, int count)
 359{
 360        if (!count)
 361                return count;
 362
 363        count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
 364
 365        return count;
 366}
 367
 368static int oti6858_write_room(struct tty_struct *tty)
 369{
 370        struct usb_serial_port *port = tty->driver_data;
 371        int room = 0;
 372        unsigned long flags;
 373
 374        spin_lock_irqsave(&port->lock, flags);
 375        room = kfifo_avail(&port->write_fifo);
 376        spin_unlock_irqrestore(&port->lock, flags);
 377
 378        return room;
 379}
 380
 381static int oti6858_chars_in_buffer(struct tty_struct *tty)
 382{
 383        struct usb_serial_port *port = tty->driver_data;
 384        int chars = 0;
 385        unsigned long flags;
 386
 387        spin_lock_irqsave(&port->lock, flags);
 388        chars = kfifo_len(&port->write_fifo);
 389        spin_unlock_irqrestore(&port->lock, flags);
 390
 391        return chars;
 392}
 393
 394static void oti6858_init_termios(struct tty_struct *tty)
 395{
 396        tty->termios = tty_std_termios;
 397        tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
 398        tty->termios.c_ispeed = 38400;
 399        tty->termios.c_ospeed = 38400;
 400}
 401
 402static void oti6858_set_termios(struct tty_struct *tty,
 403                struct usb_serial_port *port, struct ktermios *old_termios)
 404{
 405        struct oti6858_private *priv = usb_get_serial_port_data(port);
 406        unsigned long flags;
 407        unsigned int cflag;
 408        u8 frame_fmt, control;
 409        __le16 divisor;
 410        int br;
 411
 412        cflag = tty->termios.c_cflag;
 413
 414        spin_lock_irqsave(&priv->lock, flags);
 415        divisor = priv->pending_setup.divisor;
 416        frame_fmt = priv->pending_setup.frame_fmt;
 417        control = priv->pending_setup.control;
 418        spin_unlock_irqrestore(&priv->lock, flags);
 419
 420        frame_fmt &= ~FMT_DATA_BITS_MASK;
 421        switch (cflag & CSIZE) {
 422        case CS5:
 423                frame_fmt |= FMT_DATA_BITS_5;
 424                break;
 425        case CS6:
 426                frame_fmt |= FMT_DATA_BITS_6;
 427                break;
 428        case CS7:
 429                frame_fmt |= FMT_DATA_BITS_7;
 430                break;
 431        default:
 432        case CS8:
 433                frame_fmt |= FMT_DATA_BITS_8;
 434                break;
 435        }
 436
 437        /* manufacturer claims that this device can work with baud rates
 438         * up to 3 Mbps; I've tested it only on 115200 bps, so I can't
 439         * guarantee that any other baud rate will work (especially
 440         * the higher ones)
 441         */
 442        br = tty_get_baud_rate(tty);
 443        if (br == 0) {
 444                divisor = 0;
 445        } else {
 446                int real_br;
 447                int new_divisor;
 448                br = min(br, OTI6858_MAX_BAUD_RATE);
 449
 450                new_divisor = (96000000 + 8 * br) / (16 * br);
 451                real_br = 96000000 / (16 * new_divisor);
 452                divisor = cpu_to_le16(new_divisor);
 453                tty_encode_baud_rate(tty, real_br, real_br);
 454        }
 455
 456        frame_fmt &= ~FMT_STOP_BITS_MASK;
 457        if ((cflag & CSTOPB) != 0)
 458                frame_fmt |= FMT_STOP_BITS_2;
 459        else
 460                frame_fmt |= FMT_STOP_BITS_1;
 461
 462        frame_fmt &= ~FMT_PARITY_MASK;
 463        if ((cflag & PARENB) != 0) {
 464                if ((cflag & PARODD) != 0)
 465                        frame_fmt |= FMT_PARITY_ODD;
 466                else
 467                        frame_fmt |= FMT_PARITY_EVEN;
 468        } else {
 469                frame_fmt |= FMT_PARITY_NONE;
 470        }
 471
 472        control &= ~CONTROL_MASK;
 473        if ((cflag & CRTSCTS) != 0)
 474                control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
 475
 476        /* change control lines if we are switching to or from B0 */
 477        /* FIXME:
 478        spin_lock_irqsave(&priv->lock, flags);
 479        control = priv->line_control;
 480        if ((cflag & CBAUD) == B0)
 481                priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 482        else
 483                priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 484        if (control != priv->line_control) {
 485                control = priv->line_control;
 486                spin_unlock_irqrestore(&priv->lock, flags);
 487                set_control_lines(serial->dev, control);
 488        } else {
 489                spin_unlock_irqrestore(&priv->lock, flags);
 490        }
 491        */
 492
 493        spin_lock_irqsave(&priv->lock, flags);
 494        if (divisor != priv->pending_setup.divisor
 495                        || control != priv->pending_setup.control
 496                        || frame_fmt != priv->pending_setup.frame_fmt) {
 497                priv->pending_setup.divisor = divisor;
 498                priv->pending_setup.control = control;
 499                priv->pending_setup.frame_fmt = frame_fmt;
 500        }
 501        spin_unlock_irqrestore(&priv->lock, flags);
 502}
 503
 504static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 505{
 506        struct oti6858_private *priv = usb_get_serial_port_data(port);
 507        struct usb_serial *serial = port->serial;
 508        struct oti6858_control_pkt *buf;
 509        unsigned long flags;
 510        int result;
 511
 512        usb_clear_halt(serial->dev, port->write_urb->pipe);
 513        usb_clear_halt(serial->dev, port->read_urb->pipe);
 514
 515        buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 516        if (!buf)
 517                return -ENOMEM;
 518
 519        result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 520                                OTI6858_REQ_T_GET_STATUS,
 521                                OTI6858_REQ_GET_STATUS,
 522                                0, 0,
 523                                buf, OTI6858_CTRL_PKT_SIZE,
 524                                100);
 525        if (result != OTI6858_CTRL_PKT_SIZE) {
 526                /* assume default (after power-on reset) values */
 527                buf->divisor = cpu_to_le16(0x009c);     /* 38400 bps */
 528                buf->frame_fmt = 0x03;  /* 8N1 */
 529                buf->something = 0x43;
 530                buf->control = 0x4c;    /* DTR, RTS */
 531                buf->tx_status = 0x00;
 532                buf->pin_state = 0x5b;  /* RTS, CTS, DSR, DTR, RI, DCD */
 533                buf->rx_bytes_avail = 0x00;
 534        }
 535
 536        spin_lock_irqsave(&priv->lock, flags);
 537        memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
 538        priv->pending_setup.divisor = buf->divisor;
 539        priv->pending_setup.frame_fmt = buf->frame_fmt;
 540        priv->pending_setup.control = buf->control;
 541        spin_unlock_irqrestore(&priv->lock, flags);
 542        kfree(buf);
 543
 544        dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
 545        result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 546        if (result != 0) {
 547                dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
 548                        __func__, result);
 549                oti6858_close(port);
 550                return result;
 551        }
 552
 553        /* setup termios */
 554        if (tty)
 555                oti6858_set_termios(tty, port, NULL);
 556
 557        return 0;
 558}
 559
 560static void oti6858_close(struct usb_serial_port *port)
 561{
 562        struct oti6858_private *priv = usb_get_serial_port_data(port);
 563        unsigned long flags;
 564
 565        spin_lock_irqsave(&port->lock, flags);
 566        /* clear out any remaining data in the buffer */
 567        kfifo_reset_out(&port->write_fifo);
 568        spin_unlock_irqrestore(&port->lock, flags);
 569
 570        dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__);
 571
 572        /* cancel scheduled setup */
 573        cancel_delayed_work_sync(&priv->delayed_setup_work);
 574        cancel_delayed_work_sync(&priv->delayed_write_work);
 575
 576        /* shutdown our urbs */
 577        dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__);
 578        usb_kill_urb(port->write_urb);
 579        usb_kill_urb(port->read_urb);
 580        usb_kill_urb(port->interrupt_in_urb);
 581}
 582
 583static int oti6858_tiocmset(struct tty_struct *tty,
 584                                unsigned int set, unsigned int clear)
 585{
 586        struct usb_serial_port *port = tty->driver_data;
 587        struct oti6858_private *priv = usb_get_serial_port_data(port);
 588        unsigned long flags;
 589        u8 control;
 590
 591        dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n",
 592                __func__, set, clear);
 593
 594        /* FIXME: check if this is correct (active high/low) */
 595        spin_lock_irqsave(&priv->lock, flags);
 596        control = priv->pending_setup.control;
 597        if ((set & TIOCM_RTS) != 0)
 598                control |= CONTROL_RTS_HIGH;
 599        if ((set & TIOCM_DTR) != 0)
 600                control |= CONTROL_DTR_HIGH;
 601        if ((clear & TIOCM_RTS) != 0)
 602                control &= ~CONTROL_RTS_HIGH;
 603        if ((clear & TIOCM_DTR) != 0)
 604                control &= ~CONTROL_DTR_HIGH;
 605
 606        if (control != priv->pending_setup.control)
 607                priv->pending_setup.control = control;
 608
 609        spin_unlock_irqrestore(&priv->lock, flags);
 610        return 0;
 611}
 612
 613static int oti6858_tiocmget(struct tty_struct *tty)
 614{
 615        struct usb_serial_port *port = tty->driver_data;
 616        struct oti6858_private *priv = usb_get_serial_port_data(port);
 617        unsigned long flags;
 618        unsigned pin_state;
 619        unsigned result = 0;
 620
 621        spin_lock_irqsave(&priv->lock, flags);
 622        pin_state = priv->status.pin_state & PIN_MASK;
 623        spin_unlock_irqrestore(&priv->lock, flags);
 624
 625        /* FIXME: check if this is correct (active high/low) */
 626        if ((pin_state & PIN_RTS) != 0)
 627                result |= TIOCM_RTS;
 628        if ((pin_state & PIN_CTS) != 0)
 629                result |= TIOCM_CTS;
 630        if ((pin_state & PIN_DSR) != 0)
 631                result |= TIOCM_DSR;
 632        if ((pin_state & PIN_DTR) != 0)
 633                result |= TIOCM_DTR;
 634        if ((pin_state & PIN_RI) != 0)
 635                result |= TIOCM_RI;
 636        if ((pin_state & PIN_DCD) != 0)
 637                result |= TIOCM_CD;
 638
 639        dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result);
 640
 641        return result;
 642}
 643
 644static void oti6858_read_int_callback(struct urb *urb)
 645{
 646        struct usb_serial_port *port =  urb->context;
 647        struct oti6858_private *priv = usb_get_serial_port_data(port);
 648        int transient = 0, can_recv = 0, resubmit = 1;
 649        int status = urb->status;
 650
 651        switch (status) {
 652        case 0:
 653                /* success */
 654                break;
 655        case -ECONNRESET:
 656        case -ENOENT:
 657        case -ESHUTDOWN:
 658                /* this urb is terminated, clean up */
 659                dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n",
 660                        __func__, status);
 661                return;
 662        default:
 663                dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n",
 664                        __func__, status);
 665                break;
 666        }
 667
 668        if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
 669                struct oti6858_control_pkt *xs = urb->transfer_buffer;
 670                unsigned long flags;
 671
 672                spin_lock_irqsave(&priv->lock, flags);
 673
 674                if (!priv->transient) {
 675                        if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
 676                                if (xs->rx_bytes_avail == 0) {
 677                                        priv->transient = 4;
 678                                        priv->setup_done = 0;
 679                                        resubmit = 0;
 680                                        dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
 681                                        schedule_delayed_work(&priv->delayed_setup_work, 0);
 682                                }
 683                        }
 684                } else {
 685                        if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
 686                                priv->transient = 0;
 687                        } else if (!priv->setup_done) {
 688                                resubmit = 0;
 689                        } else if (--priv->transient == 0) {
 690                                if (xs->rx_bytes_avail == 0) {
 691                                        priv->transient = 4;
 692                                        priv->setup_done = 0;
 693                                        resubmit = 0;
 694                                        dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
 695                                        schedule_delayed_work(&priv->delayed_setup_work, 0);
 696                                }
 697                        }
 698                }
 699
 700                if (!priv->transient) {
 701                        u8 delta = xs->pin_state ^ priv->status.pin_state;
 702
 703                        if (delta & PIN_MSR_MASK) {
 704                                if (delta & PIN_CTS)
 705                                        port->icount.cts++;
 706                                if (delta & PIN_DSR)
 707                                        port->icount.dsr++;
 708                                if (delta & PIN_RI)
 709                                        port->icount.rng++;
 710                                if (delta & PIN_DCD)
 711                                        port->icount.dcd++;
 712
 713                                wake_up_interruptible(&port->port.delta_msr_wait);
 714                        }
 715
 716                        memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
 717                }
 718
 719                if (!priv->transient && xs->rx_bytes_avail != 0) {
 720                        can_recv = xs->rx_bytes_avail;
 721                        priv->flags.read_urb_in_use = 1;
 722                }
 723
 724                transient = priv->transient;
 725                spin_unlock_irqrestore(&priv->lock, flags);
 726        }
 727
 728        if (can_recv) {
 729                int result;
 730
 731                result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 732                if (result != 0) {
 733                        priv->flags.read_urb_in_use = 0;
 734                        dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
 735                                        " error %d\n", __func__, result);
 736                } else {
 737                        resubmit = 0;
 738                }
 739        } else if (!transient) {
 740                unsigned long flags;
 741                int count;
 742
 743                spin_lock_irqsave(&port->lock, flags);
 744                count = kfifo_len(&port->write_fifo);
 745                spin_unlock_irqrestore(&port->lock, flags);
 746
 747                spin_lock_irqsave(&priv->lock, flags);
 748                if (priv->flags.write_urb_in_use == 0 && count != 0) {
 749                        schedule_delayed_work(&priv->delayed_write_work, 0);
 750                        resubmit = 0;
 751                }
 752                spin_unlock_irqrestore(&priv->lock, flags);
 753        }
 754
 755        if (resubmit) {
 756                int result;
 757
 758/*              dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */
 759                result = usb_submit_urb(urb, GFP_ATOMIC);
 760                if (result != 0) {
 761                        dev_err(&urb->dev->dev,
 762                                        "%s(): usb_submit_urb() failed with"
 763                                        " error %d\n", __func__, result);
 764                }
 765        }
 766}
 767
 768static void oti6858_read_bulk_callback(struct urb *urb)
 769{
 770        struct usb_serial_port *port =  urb->context;
 771        struct oti6858_private *priv = usb_get_serial_port_data(port);
 772        unsigned char *data = urb->transfer_buffer;
 773        unsigned long flags;
 774        int status = urb->status;
 775        int result;
 776
 777        spin_lock_irqsave(&priv->lock, flags);
 778        priv->flags.read_urb_in_use = 0;
 779        spin_unlock_irqrestore(&priv->lock, flags);
 780
 781        if (status != 0) {
 782                dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__);
 783                return;
 784        }
 785
 786        if (urb->actual_length > 0) {
 787                tty_insert_flip_string(&port->port, data, urb->actual_length);
 788                tty_flip_buffer_push(&port->port);
 789        }
 790
 791        /* schedule the interrupt urb */
 792        result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 793        if (result != 0 && result != -EPERM) {
 794                dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
 795                                " error %d\n", __func__, result);
 796        }
 797}
 798
 799static void oti6858_write_bulk_callback(struct urb *urb)
 800{
 801        struct usb_serial_port *port =  urb->context;
 802        struct oti6858_private *priv = usb_get_serial_port_data(port);
 803        int status = urb->status;
 804        int result;
 805
 806        switch (status) {
 807        case 0:
 808                /* success */
 809                break;
 810        case -ECONNRESET:
 811        case -ENOENT:
 812        case -ESHUTDOWN:
 813                /* this urb is terminated, clean up */
 814                dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status);
 815                priv->flags.write_urb_in_use = 0;
 816                return;
 817        default:
 818                /* error in the urb, so we have to resubmit it */
 819                dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status);
 820                dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__);
 821
 822                port->write_urb->transfer_buffer_length = 1;
 823                result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 824                if (result) {
 825                        dev_err_console(port, "%s(): usb_submit_urb() failed,"
 826                                        " error %d\n", __func__, result);
 827                } else {
 828                        return;
 829                }
 830        }
 831
 832        priv->flags.write_urb_in_use = 0;
 833
 834        /* schedule the interrupt urb if we are still open */
 835        dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
 836        result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 837        if (result != 0) {
 838                dev_err(&port->dev, "%s(): failed submitting int urb,"
 839                                        " error %d\n", __func__, result);
 840        }
 841}
 842
 843module_usb_serial_driver(serial_drivers, id_table);
 844
 845MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
 846MODULE_AUTHOR(OTI6858_AUTHOR);
 847MODULE_LICENSE("GPL v2");
 848