/******************************************************************************

    AudioScience HPI driver
    Copyright (C) 1997-2011  AudioScience Inc. <support@audioscience.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of version 2 of the GNU General Public License as
    published by the Free Software Foundation;

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 Hardware Programming Interface (HPI) for AudioScience ASI6200 series adapters.
 These PCI bus adapters are based on the TI C6711 DSP.

 Exported functions:
 void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)

 #defines
 HIDE_PCI_ASSERTS to show the PCI asserts
 PROFILE_DSP2 get profile data from DSP2 if present (instead of DSP 1)

(C) Copyright AudioScience Inc. 1998-2003
*******************************************************************************/
#define SOURCEFILE_NAME "hpi6000.c"

#include "hpi_internal.h"
#include "hpimsginit.h"
#include "hpidebug.h"
#include "hpi6000.h"
#include "hpidspcd.h"
#include "hpicmn.h"

#define HPI_HIF_BASE (0x00000200)       /* start of C67xx internal RAM */
#define HPI_HIF_ADDR(member) \
        (HPI_HIF_BASE + offsetof(struct hpi_hif_6000, member))
#define HPI_HIF_ERROR_MASK      0x4000

/* HPI6000 specific error codes */
#define HPI6000_ERROR_BASE 900  /* not actually used anywhere */

/* operational/messaging errors */
#define HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT             901
#define HPI6000_ERROR_RESP_GET_LEN                      902
#define HPI6000_ERROR_MSG_RESP_GET_RESP_ACK             903
#define HPI6000_ERROR_MSG_GET_ADR                       904
#define HPI6000_ERROR_RESP_GET_ADR                      905
#define HPI6000_ERROR_MSG_RESP_BLOCKWRITE32             906
#define HPI6000_ERROR_MSG_RESP_BLOCKREAD32              907

#define HPI6000_ERROR_CONTROL_CACHE_PARAMS              909

#define HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT            911
#define HPI6000_ERROR_SEND_DATA_ACK                     912
#define HPI6000_ERROR_SEND_DATA_ADR                     913
#define HPI6000_ERROR_SEND_DATA_TIMEOUT                 914
#define HPI6000_ERROR_SEND_DATA_CMD                     915
#define HPI6000_ERROR_SEND_DATA_WRITE                   916
#define HPI6000_ERROR_SEND_DATA_IDLECMD                 917

#define HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT             921
#define HPI6000_ERROR_GET_DATA_ACK                      922
#define HPI6000_ERROR_GET_DATA_CMD                      923
#define HPI6000_ERROR_GET_DATA_READ                     924
#define HPI6000_ERROR_GET_DATA_IDLECMD                  925

#define HPI6000_ERROR_CONTROL_CACHE_ADDRLEN             951
#define HPI6000_ERROR_CONTROL_CACHE_READ                952
#define HPI6000_ERROR_CONTROL_CACHE_FLUSH               953

#define HPI6000_ERROR_MSG_RESP_GETRESPCMD               961
#define HPI6000_ERROR_MSG_RESP_IDLECMD                  962

/* Initialisation/bootload errors */
#define HPI6000_ERROR_UNHANDLED_SUBSYS_ID               930

/* can't access PCI2040 */
#define HPI6000_ERROR_INIT_PCI2040                      931
/* can't access DSP HPI i/f */
#define HPI6000_ERROR_INIT_DSPHPI                       932
/* can't access internal DSP memory */
#define HPI6000_ERROR_INIT_DSPINTMEM                    933
/* can't access SDRAM - test#1 */
#define HPI6000_ERROR_INIT_SDRAM1                       934
/* can't access SDRAM - test#2 */
#define HPI6000_ERROR_INIT_SDRAM2                       935

#define HPI6000_ERROR_INIT_VERIFY                       938

#define HPI6000_ERROR_INIT_NOACK                        939

#define HPI6000_ERROR_INIT_PLDTEST1                     941
#define HPI6000_ERROR_INIT_PLDTEST2                     942

/* local defines */

#define HIDE_PCI_ASSERTS
#define PROFILE_DSP2

/* for PCI2040 i/f chip */
/* HPI CSR registers */
/* word offsets from CSR base */
/* use when io addresses defined as u32 * */

#define INTERRUPT_EVENT_SET     0
#define INTERRUPT_EVENT_CLEAR   1
#define INTERRUPT_MASK_SET      2
#define INTERRUPT_MASK_CLEAR    3
#define HPI_ERROR_REPORT        4
#define HPI_RESET               5
#define HPI_DATA_WIDTH          6

#define MAX_DSPS 2
/* HPI registers, spaced 8K bytes = 2K words apart */
#define DSP_SPACING             0x800

#define CONTROL                 0x0000
#define ADDRESS                 0x0200
#define DATA_AUTOINC            0x0400
#define DATA                    0x0600

#define TIMEOUT 500000

struct dsp_obj {
        __iomem u32 *prHPI_control;
        __iomem u32 *prHPI_address;
        __iomem u32 *prHPI_data;
        __iomem u32 *prHPI_data_auto_inc;
        char c_dsp_rev;         /*A, B */
        u32 control_cache_address_on_dsp;
        u32 control_cache_length_on_dsp;
        struct hpi_adapter_obj *pa_parent_adapter;
};

struct hpi_hw_obj {
        __iomem u32 *dw2040_HPICSR;
        __iomem u32 *dw2040_HPIDSP;

        u16 num_dsp;
        struct dsp_obj ado[MAX_DSPS];

        u32 message_buffer_address_on_dsp;
        u32 response_buffer_address_on_dsp;
        u32 pCI2040HPI_error_count;

        struct hpi_control_cache_single control_cache[HPI_NMIXER_CONTROLS];
        struct hpi_control_cache *p_cache;
};

static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
        u16 dsp_index, u32 hpi_address, u32 *source, u32 count);
static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
        u16 dsp_index, u32 hpi_address, u32 *dest, u32 count);

static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
        u32 *pos_error_code);
static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
        u16 read_or_write);
#define H6READ 1
#define H6WRITE 0

static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
        struct hpi_message *phm);
static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
        u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr);

static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
        struct hpi_response *phr);

static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
        u32 ack_value);

static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
        u16 dsp_index, u32 host_cmd);

static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo);

static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
        struct hpi_message *phm, struct hpi_response *phr);

static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
        struct hpi_message *phm, struct hpi_response *phr);

static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data);

static u32 hpi_read_word(struct dsp_obj *pdo, u32 address);

static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
        u32 length);

static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
        u32 length);

static void subsys_create_adapter(struct hpi_message *phm,
        struct hpi_response *phr);

static void adapter_delete(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr);

static void adapter_get_asserts(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr);

static short create_adapter_obj(struct hpi_adapter_obj *pao,
        u32 *pos_error_code);

static void delete_adapter_obj(struct hpi_adapter_obj *pao);

/* local globals */

static u16 gw_pci_read_asserts; /* used to count PCI2040 errors */
static u16 gw_pci_write_asserts;        /* used to count PCI2040 errors */

static void subsys_message(struct hpi_message *phm, struct hpi_response *phr)
{
        switch (phm->function) {
        case HPI_SUBSYS_CREATE_ADAPTER:
                subsys_create_adapter(phm, phr);
                break;
        default:
                phr->error = HPI_ERROR_INVALID_FUNC;
                break;
        }
}

static void control_message(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr)
{
        struct hpi_hw_obj *phw = pao->priv;

        switch (phm->function) {
        case HPI_CONTROL_GET_STATE:
                if (pao->has_control_cache) {
                        u16 err;
                        err = hpi6000_update_control_cache(pao, phm);

                        if (err) {
                                if (err >= HPI_ERROR_BACKEND_BASE) {
                                        phr->error =
                                                HPI_ERROR_CONTROL_CACHING;
                                        phr->specific_error = err;
                                } else {
                                        phr->error = err;
                                }
                                break;
                        }

                        if (hpi_check_control_cache(phw->p_cache, phm, phr))
                                break;
                }
                hw_message(pao, phm, phr);
                break;
        case HPI_CONTROL_SET_STATE:
                hw_message(pao, phm, phr);
                hpi_cmn_control_cache_sync_to_msg(phw->p_cache, phm, phr);
                break;

        case HPI_CONTROL_GET_INFO:
        default:
                hw_message(pao, phm, phr);
                break;
        }
}

static void adapter_message(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr)
{
        switch (phm->function) {
        case HPI_ADAPTER_GET_ASSERT:
                adapter_get_asserts(pao, phm, phr);
                break;

        case HPI_ADAPTER_DELETE:
                adapter_delete(pao, phm, phr);
                break;

        default:
                hw_message(pao, phm, phr);
                break;
        }
}

static void outstream_message(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr)
{
        switch (phm->function) {
        case HPI_OSTREAM_HOSTBUFFER_ALLOC:
        case HPI_OSTREAM_HOSTBUFFER_FREE:
                /* Don't let these messages go to the HW function because
                 * they're called without locking the spinlock.
                 * For the HPI6000 adapters the HW would return
                 * HPI_ERROR_INVALID_FUNC anyway.
                 */
                phr->error = HPI_ERROR_INVALID_FUNC;
                break;
        default:
                hw_message(pao, phm, phr);
                return;
        }
}

static void instream_message(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr)
{

        switch (phm->function) {
        case HPI_ISTREAM_HOSTBUFFER_ALLOC:
        case HPI_ISTREAM_HOSTBUFFER_FREE:
                /* Don't let these messages go to the HW function because
                 * they're called without locking the spinlock.
                 * For the HPI6000 adapters the HW would return
                 * HPI_ERROR_INVALID_FUNC anyway.
                 */
                phr->error = HPI_ERROR_INVALID_FUNC;
                break;
        default:
                hw_message(pao, phm, phr);
                return;
        }
}

/************************************************************************/
/** HPI_6000()
 * Entry point from HPIMAN
 * All calls to the HPI start here
 */
void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)
{
        struct hpi_adapter_obj *pao = NULL;

        if (phm->object != HPI_OBJ_SUBSYSTEM) {
                pao = hpi_find_adapter(phm->adapter_index);
                if (!pao) {
                        hpi_init_response(phr, phm->object, phm->function,
                                HPI_ERROR_BAD_ADAPTER_NUMBER);
                        HPI_DEBUG_LOG(DEBUG, "invalid adapter index: %d \n",
                                phm->adapter_index);
                        return;
                }

                /* Don't even try to communicate with crashed DSP */
                if (pao->dsp_crashed >= 10) {
                        hpi_init_response(phr, phm->object, phm->function,
                                HPI_ERROR_DSP_HARDWARE);
                        HPI_DEBUG_LOG(DEBUG, "adapter %d dsp crashed\n",
                                phm->adapter_index);
                        return;
                }
        }
        /* Init default response including the size field */
        if (phm->function != HPI_SUBSYS_CREATE_ADAPTER)
                hpi_init_response(phr, phm->object, phm->function,
                        HPI_ERROR_PROCESSING_MESSAGE);

        switch (phm->type) {
        case HPI_TYPE_REQUEST:
                switch (phm->object) {
                case HPI_OBJ_SUBSYSTEM:
                        subsys_message(phm, phr);
                        break;

                case HPI_OBJ_ADAPTER:
                        phr->size =
                                sizeof(struct hpi_response_header) +
                                sizeof(struct hpi_adapter_res);
                        adapter_message(pao, phm, phr);
                        break;

                case HPI_OBJ_CONTROL:
                        control_message(pao, phm, phr);
                        break;

                case HPI_OBJ_OSTREAM:
                        outstream_message(pao, phm, phr);
                        break;

                case HPI_OBJ_ISTREAM:
                        instream_message(pao, phm, phr);
                        break;

                default:
                        hw_message(pao, phm, phr);
                        break;
                }
                break;

        default:
                phr->error = HPI_ERROR_INVALID_TYPE;
                break;
        }
}

/************************************************************************/
/* SUBSYSTEM */

/* create an adapter object and initialise it based on resource information
 * passed in in the message
 * NOTE - you cannot use this function AND the FindAdapters function at the
 * same time, the application must use only one of them to get the adapters
 */
static void subsys_create_adapter(struct hpi_message *phm,
        struct hpi_response *phr)
{
        /* create temp adapter obj, because we don't know what index yet */
        struct hpi_adapter_obj ao;
        struct hpi_adapter_obj *pao;
        u32 os_error_code;
        u16 err = 0;
        u32 dsp_index = 0;

        HPI_DEBUG_LOG(VERBOSE, "subsys_create_adapter\n");

        memset(&ao, 0, sizeof(ao));

        ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL);
        if (!ao.priv) {
                HPI_DEBUG_LOG(ERROR, "can't get mem for adapter object\n");
                phr->error = HPI_ERROR_MEMORY_ALLOC;
                return;
        }

        /* create the adapter object based on the resource information */
        ao.pci = *phm->u.s.resource.r.pci;

        err = create_adapter_obj(&ao, &os_error_code);
        if (err) {
                delete_adapter_obj(&ao);
                if (err >= HPI_ERROR_BACKEND_BASE) {
                        phr->error = HPI_ERROR_DSP_BOOTLOAD;
                        phr->specific_error = err;
                } else {
                        phr->error = err;
                }

                phr->u.s.data = os_error_code;
                return;
        }
        /* need to update paParentAdapter */
        pao = hpi_find_adapter(ao.index);
        if (!pao) {
                /* We just added this adapter, why can't we find it!? */
                HPI_DEBUG_LOG(ERROR, "lost adapter after boot\n");
                phr->error = HPI_ERROR_BAD_ADAPTER;
                return;
        }

        for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
                struct hpi_hw_obj *phw = pao->priv;
                phw->ado[dsp_index].pa_parent_adapter = pao;
        }

        phr->u.s.adapter_type = ao.type;
        phr->u.s.adapter_index = ao.index;
        phr->error = 0;
}

static void adapter_delete(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr)
{
        delete_adapter_obj(pao);
        hpi_delete_adapter(pao);
        phr->error = 0;
}

/* this routine is called from SubSysFindAdapter and SubSysCreateAdapter */
static short create_adapter_obj(struct hpi_adapter_obj *pao,
        u32 *pos_error_code)
{
        short boot_error = 0;
        u32 dsp_index = 0;
        u32 control_cache_size = 0;
        u32 control_cache_count = 0;
        struct hpi_hw_obj *phw = pao->priv;

        /* The PCI2040 has the following address map */
        /* BAR0 - 4K = HPI control and status registers on PCI2040 (HPI CSR) */
        /* BAR1 - 32K = HPI registers on DSP */
        phw->dw2040_HPICSR = pao->pci.ap_mem_base[0];
        phw->dw2040_HPIDSP = pao->pci.ap_mem_base[1];
        HPI_DEBUG_LOG(VERBOSE, "csr %p, dsp %p\n", phw->dw2040_HPICSR,
                phw->dw2040_HPIDSP);

        /* set addresses for the possible DSP HPI interfaces */
        for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
                phw->ado[dsp_index].prHPI_control =
                        phw->dw2040_HPIDSP + (CONTROL +
                        DSP_SPACING * dsp_index);

                phw->ado[dsp_index].prHPI_address =
                        phw->dw2040_HPIDSP + (ADDRESS +
                        DSP_SPACING * dsp_index);
                phw->ado[dsp_index].prHPI_data =
                        phw->dw2040_HPIDSP + (DATA + DSP_SPACING * dsp_index);

                phw->ado[dsp_index].prHPI_data_auto_inc =
                        phw->dw2040_HPIDSP + (DATA_AUTOINC +
                        DSP_SPACING * dsp_index);

                HPI_DEBUG_LOG(VERBOSE, "ctl %p, adr %p, dat %p, dat++ %p\n",
                        phw->ado[dsp_index].prHPI_control,
                        phw->ado[dsp_index].prHPI_address,
                        phw->ado[dsp_index].prHPI_data,
                        phw->ado[dsp_index].prHPI_data_auto_inc);

                phw->ado[dsp_index].pa_parent_adapter = pao;
        }

        phw->pCI2040HPI_error_count = 0;
        pao->has_control_cache = 0;

        /* Set the default number of DSPs on this card */
        /* This is (conditionally) adjusted after bootloading */
        /* of the first DSP in the bootload section. */
        phw->num_dsp = 1;

        boot_error = hpi6000_adapter_boot_load_dsp(pao, pos_error_code);
        if (boot_error)
                return boot_error;

        HPI_DEBUG_LOG(INFO, "bootload DSP OK\n");

        phw->message_buffer_address_on_dsp = 0L;
        phw->response_buffer_address_on_dsp = 0L;

        /* get info about the adapter by asking the adapter */
        /* send a HPI_ADAPTER_GET_INFO message */
        {
                struct hpi_message hm;
                struct hpi_response hr0;        /* response from DSP 0 */
                struct hpi_response hr1;        /* response from DSP 1 */
                u16 error = 0;

                HPI_DEBUG_LOG(VERBOSE, "send ADAPTER_GET_INFO\n");
                memset(&hm, 0, sizeof(hm));
                hm.type = HPI_TYPE_REQUEST;
                hm.size = sizeof(struct hpi_message);
                hm.object = HPI_OBJ_ADAPTER;
                hm.function = HPI_ADAPTER_GET_INFO;
                hm.adapter_index = 0;
                memset(&hr0, 0, sizeof(hr0));
                memset(&hr1, 0, sizeof(hr1));
                hr0.size = sizeof(hr0);
                hr1.size = sizeof(hr1);

                error = hpi6000_message_response_sequence(pao, 0, &hm, &hr0);
                if (hr0.error) {
                        HPI_DEBUG_LOG(DEBUG, "message error %d\n", hr0.error);
                        return hr0.error;
                }
                if (phw->num_dsp == 2) {
                        error = hpi6000_message_response_sequence(pao, 1, &hm,
                                &hr1);
                        if (error)
                                return error;
                }
                pao->type = hr0.u.ax.info.adapter_type;
                pao->index = hr0.u.ax.info.adapter_index;
        }

        memset(&phw->control_cache[0], 0,
                sizeof(struct hpi_control_cache_single) *
                HPI_NMIXER_CONTROLS);
        /* Read the control cache length to figure out if it is turned on */
        control_cache_size =
                hpi_read_word(&phw->ado[0],
                HPI_HIF_ADDR(control_cache_size_in_bytes));
        if (control_cache_size) {
                control_cache_count =
                        hpi_read_word(&phw->ado[0],
                        HPI_HIF_ADDR(control_cache_count));

                phw->p_cache =
                        hpi_alloc_control_cache(control_cache_count,
                        control_cache_size, (unsigned char *)
                        &phw->control_cache[0]
                        );
                if (phw->p_cache)
                        pao->has_control_cache = 1;
        }

        HPI_DEBUG_LOG(DEBUG, "get adapter info ASI%04X index %d\n", pao->type,
                pao->index);

        if (phw->p_cache)
                phw->p_cache->adap_idx = pao->index;

        return hpi_add_adapter(pao);
}

static void delete_adapter_obj(struct hpi_adapter_obj *pao)
{
        struct hpi_hw_obj *phw = pao->priv;

        if (pao->has_control_cache)
                hpi_free_control_cache(phw->p_cache);

        /* reset DSPs on adapter */
        iowrite32(0x0003000F, phw->dw2040_HPICSR + HPI_RESET);

        kfree(phw);
}

/************************************************************************/
/* ADAPTER */

static void adapter_get_asserts(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr)
{
#ifndef HIDE_PCI_ASSERTS
        /* if we have PCI2040 asserts then collect them */
        if ((gw_pci_read_asserts > 0) || (gw_pci_write_asserts > 0)) {
                phr->u.ax.assert.p1 =
                        gw_pci_read_asserts * 100 + gw_pci_write_asserts;
                phr->u.ax.assert.p2 = 0;
                phr->u.ax.assert.count = 1;     /* assert count */
                phr->u.ax.assert.dsp_index = -1;        /* "dsp index" */
                strcpy(phr->u.ax.assert.sz_message, "PCI2040 error");
                phr->u.ax.assert.dsp_msg_addr = 0;
                gw_pci_read_asserts = 0;
                gw_pci_write_asserts = 0;
                phr->error = 0;
        } else
#endif
                hw_message(pao, phm, phr);      /*get DSP asserts */

        return;
}

/************************************************************************/
/* LOW-LEVEL */

static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
        u32 *pos_error_code)
{
        struct hpi_hw_obj *phw = pao->priv;
        short error;
        u32 timeout;
        u32 read = 0;
        u32 i = 0;
        u32 data = 0;
        u32 j = 0;
        u32 test_addr = 0x80000000;
        u32 test_data = 0x00000001;
        u32 dw2040_reset = 0;
        u32 dsp_index = 0;
        u32 endian = 0;
        u32 adapter_info = 0;
        u32 delay = 0;

        struct dsp_code dsp_code;
        u16 boot_load_family = 0;

        /* NOTE don't use wAdapterType in this routine. It is not setup yet */

        switch (pao->pci.pci_dev->subsystem_device) {
        case 0x5100:
        case 0x5110:    /* ASI5100 revB or higher with C6711D */
        case 0x5200:    /* ASI5200 PCIe version of ASI5100 */
        case 0x6100:
        case 0x6200:
                boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x6200);
                break;
        default:
                return HPI6000_ERROR_UNHANDLED_SUBSYS_ID;
        }

        /* reset all DSPs, indicate two DSPs are present
         * set RST3-=1 to disconnect HAD8 to set DSP in little endian mode
         */
        endian = 0;
        dw2040_reset = 0x0003000F;
        iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);

        /* read back register to make sure PCI2040 chip is functioning
         * note that bits 4..15 are read-only and so should always return zero,
         * even though we wrote 1 to them
         */
        hpios_delay_micro_seconds(1000);
        delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);

        if (delay != dw2040_reset) {
                HPI_DEBUG_LOG(ERROR, "INIT_PCI2040 %x %x\n", dw2040_reset,
                        delay);
                return HPI6000_ERROR_INIT_PCI2040;
        }

        /* Indicate that DSP#0,1 is a C6X */
        iowrite32(0x00000003, phw->dw2040_HPICSR + HPI_DATA_WIDTH);
        /* set Bit30 and 29 - which will prevent Target aborts from being
         * issued upon HPI or GP error
         */
        iowrite32(0x60000000, phw->dw2040_HPICSR + INTERRUPT_MASK_SET);

        /* isolate DSP HAD8 line from PCI2040 so that
         * Little endian can be set by pullup
         */
        dw2040_reset = dw2040_reset & (~(endian << 3));
        iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);

        phw->ado[0].c_dsp_rev = 'B';    /* revB */
        phw->ado[1].c_dsp_rev = 'B';    /* revB */

        /*Take both DSPs out of reset, setting HAD8 to the correct Endian */
        dw2040_reset = dw2040_reset & (~0x00000001);    /* start DSP 0 */
        iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
        dw2040_reset = dw2040_reset & (~0x00000002);    /* start DSP 1 */
        iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);

        /* set HAD8 back to PCI2040, now that DSP set to little endian mode */
        dw2040_reset = dw2040_reset & (~0x00000008);
        iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
        /*delay to allow DSP to get going */
        hpios_delay_micro_seconds(100);

        /* loop through all DSPs, downloading DSP code */
        for (dsp_index = 0; dsp_index < phw->num_dsp; dsp_index++) {
                struct dsp_obj *pdo = &phw->ado[dsp_index];

                /* configure DSP so that we download code into the SRAM */
                /* set control reg for little endian, HWOB=1 */
                iowrite32(0x00010001, pdo->prHPI_control);

                /* test access to the HPI address register (HPIA) */
                test_data = 0x00000001;
                for (j = 0; j < 32; j++) {
                        iowrite32(test_data, pdo->prHPI_address);
                        data = ioread32(pdo->prHPI_address);
                        if (data != test_data) {
                                HPI_DEBUG_LOG(ERROR, "INIT_DSPHPI %x %x %x\n",
                                        test_data, data, dsp_index);
                                return HPI6000_ERROR_INIT_DSPHPI;
                        }
                        test_data = test_data << 1;
                }

/* if C6713 the setup PLL to generate 225MHz from 25MHz.
* Since the PLLDIV1 read is sometimes wrong, even on a C6713,
* we're going to do this unconditionally
*/
/* PLLDIV1 should have a value of 8000 after reset */
/*
        if (HpiReadWord(pdo,0x01B7C118) == 0x8000)
*/
                {
                        /* C6713 datasheet says we cannot program PLL from HPI,
                         * and indeed if we try to set the PLL multiply from the
                         * HPI, the PLL does not seem to lock,
                         * so we enable the PLL and use the default of x 7
                         */
                        /* bypass PLL */
                        hpi_write_word(pdo, 0x01B7C100, 0x0000);
                        hpios_delay_micro_seconds(100);

                        /*  ** use default of PLL  x7 ** */
                        /* EMIF = 225/3=75MHz */
                        hpi_write_word(pdo, 0x01B7C120, 0x8002);
                        hpios_delay_micro_seconds(100);

                        /* peri = 225/2 */
                        hpi_write_word(pdo, 0x01B7C11C, 0x8001);
                        hpios_delay_micro_seconds(100);

                        /* cpu  = 225/1 */
                        hpi_write_word(pdo, 0x01B7C118, 0x8000);

                        /* ~2ms delay */
                        hpios_delay_micro_seconds(2000);

                        /* PLL not bypassed */
                        hpi_write_word(pdo, 0x01B7C100, 0x0001);
                        /* ~2ms delay */
                        hpios_delay_micro_seconds(2000);
                }

                /* test r/w to internal DSP memory
                 * C6711 has L2 cache mapped to 0x0 when reset
                 *
                 *  revB - because of bug 3.0.1 last HPI read
                 * (before HPI address issued) must be non-autoinc
                 */
                /* test each bit in the 32bit word */
                for (i = 0; i < 100; i++) {
                        test_addr = 0x00000000;
                        test_data = 0x00000001;
                        for (j = 0; j < 32; j++) {
                                hpi_write_word(pdo, test_addr + i, test_data);
                                data = hpi_read_word(pdo, test_addr + i);
                                if (data != test_data) {
                                        HPI_DEBUG_LOG(ERROR,
                                                "DSP mem %x %x %x %x\n",
                                                test_addr + i, test_data,
                                                data, dsp_index);

                                        return HPI6000_ERROR_INIT_DSPINTMEM;
                                }
                                test_data = test_data << 1;
                        }
                }

                /* memory map of ASI6200
                   00000000-0000FFFF    16Kx32 internal program
                   01800000-019FFFFF    Internal peripheral
                   80000000-807FFFFF    CE0 2Mx32 SDRAM running @ 100MHz
                   90000000-9000FFFF    CE1 Async peripherals:

                   EMIF config
                   ------------
                   Global EMIF control
                   0 -
                   1 -
                   2 -
                   3 CLK2EN = 1   CLKOUT2 enabled
                   4 CLK1EN = 0   CLKOUT1 disabled
                   5 EKEN = 1 <--!! C6713 specific, enables ECLKOUT
                   6 -
                   7 NOHOLD = 1   external HOLD disabled
                   8 HOLDA = 0    HOLDA output is low
                   9 HOLD = 0             HOLD input is low
                   10 ARDY = 1    ARDY input is high
                   11 BUSREQ = 0   BUSREQ output is low
                   12,13 Reserved = 1
                 */
                hpi_write_word(pdo, 0x01800000, 0x34A8);

                /* EMIF CE0 setup - 2Mx32 Sync DRAM
                   31..28       Wr setup
                   27..22       Wr strobe
                   21..20       Wr hold
                   19..16       Rd setup
                   15..14       -
                   13..8        Rd strobe
                   7..4         MTYPE   0011            Sync DRAM 32bits
                   3            Wr hold MSB
                   2..0         Rd hold
                 */
                hpi_write_word(pdo, 0x01800008, 0x00000030);

                /* EMIF SDRAM Extension
                   31-21        0
                   20           WR2RD = 0
                   19-18        WR2DEAC = 1
                   17           WR2WR = 0
                   16-15        R2WDQM = 2
                   14-12        RD2WR = 4
                   11-10        RD2DEAC = 1
                   9            RD2RD = 1
                   8-7          THZP = 10b
                   6-5          TWR  = 2-1 = 01b (tWR = 10ns)
                   4            TRRD = 0b = 2 ECLK (tRRD = 14ns)
                   3-1          TRAS = 5-1 = 100b (Tras=42ns = 5 ECLK)
                   1            CAS latency = 3 ECLK
                   (for Micron 2M32-7 operating at 100Mhz)
                 */

                /* need to use this else DSP code crashes */
                hpi_write_word(pdo, 0x01800020, 0x001BDF29);

                /* EMIF SDRAM control - set up for a 2Mx32 SDRAM (512x32x4 bank)
                   31           -               -
                   30           SDBSZ   1               4 bank
                   29..28       SDRSZ   00              11 row address pins
                   27..26       SDCSZ   01              8 column address pins
                   25           RFEN    1               refersh enabled
                   24           INIT    1               init SDRAM
                   23..20       TRCD    0001
                   19..16       TRP             0001
                   15..12       TRC             0110
                   11..0        -               -
                 */
                /*      need to use this else DSP code crashes */
                hpi_write_word(pdo, 0x01800018, 0x47117000);

                /* EMIF SDRAM Refresh Timing */
                hpi_write_word(pdo, 0x0180001C, 0x00000410);

                /*MIF CE1 setup - Async peripherals
                   @100MHz bus speed, each cycle is 10ns,
                   31..28       Wr setup  = 1
                   27..22       Wr strobe = 3                   30ns
                   21..20       Wr hold = 1
                   19..16       Rd setup =1
                   15..14       Ta = 2
                   13..8        Rd strobe = 3                   30ns
                   7..4         MTYPE   0010            Async 32bits
                   3            Wr hold MSB =0
                   2..0         Rd hold = 1
                 */
                {
                        u32 cE1 =
                                (1L << 28) | (3L << 22) | (1L << 20) | (1L <<
                                16) | (2L << 14) | (3L << 8) | (2L << 4) | 1L;
                        hpi_write_word(pdo, 0x01800004, cE1);
                }

                /* delay a little to allow SDRAM and DSP to "get going" */
                hpios_delay_micro_seconds(1000);

                /* test access to SDRAM */
                {
                        test_addr = 0x80000000;
                        test_data = 0x00000001;
                        /* test each bit in the 32bit word */
                        for (j = 0; j < 32; j++) {
                                hpi_write_word(pdo, test_addr, test_data);
                                data = hpi_read_word(pdo, test_addr);
                                if (data != test_data) {
                                        HPI_DEBUG_LOG(ERROR,
                                                "DSP dram %x %x %x %x\n",
                                                test_addr, test_data, data,
                                                dsp_index);

                                        return HPI6000_ERROR_INIT_SDRAM1;
                                }
                                test_data = test_data << 1;
                        }
                        /* test every Nth address in the DRAM */
#define DRAM_SIZE_WORDS 0x200000        /*2_mx32 */
#define DRAM_INC 1024
                        test_addr = 0x80000000;
                        test_data = 0x0;
                        for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
                                hpi_write_word(pdo, test_addr + i, test_data);
                                test_data++;
                        }
                        test_addr = 0x80000000;
                        test_data = 0x0;
                        for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
                                data = hpi_read_word(pdo, test_addr + i);
                                if (data != test_data) {
                                        HPI_DEBUG_LOG(ERROR,
                                                "DSP dram %x %x %x %x\n",
                                                test_addr + i, test_data,
                                                data, dsp_index);
                                        return HPI6000_ERROR_INIT_SDRAM2;
                                }
                                test_data++;
                        }

                }

                /* write the DSP code down into the DSPs memory */
                error = hpi_dsp_code_open(boot_load_family, pao->pci.pci_dev,
                        &dsp_code, pos_error_code);

                if (error)
                        return error;

                while (1) {
                        u32 length;
                        u32 address;
                        u32 type;
                        u32 *pcode;

                        error = hpi_dsp_code_read_word(&dsp_code, &length);
                        if (error)
                                break;
                        if (length == 0xFFFFFFFF)
                                break;  /* end of code */

                        error = hpi_dsp_code_read_word(&dsp_code, &address);
                        if (error)
                                break;
                        error = hpi_dsp_code_read_word(&dsp_code, &type);
                        if (error)
                                break;
                        error = hpi_dsp_code_read_block(length, &dsp_code,
                                &pcode);
                        if (error)
                                break;
                        error = hpi6000_dsp_block_write32(pao, (u16)dsp_index,
                                address, pcode, length);
                        if (error)
                                break;
                }

                if (error) {
                        hpi_dsp_code_close(&dsp_code);
                        return error;
                }
                /* verify that code was written correctly */
                /* this time through, assume no errors in DSP code file/array */
                hpi_dsp_code_rewind(&dsp_code);
                while (1) {
                        u32 length;
                        u32 address;
                        u32 type;
                        u32 *pcode;

                        hpi_dsp_code_read_word(&dsp_code, &length);
                        if (length == 0xFFFFFFFF)
                                break;  /* end of code */

                        hpi_dsp_code_read_word(&dsp_code, &address);
                        hpi_dsp_code_read_word(&dsp_code, &type);
                        hpi_dsp_code_read_block(length, &dsp_code, &pcode);

                        for (i = 0; i < length; i++) {
                                data = hpi_read_word(pdo, address);
                                if (data != *pcode) {
                                        error = HPI6000_ERROR_INIT_VERIFY;
                                        HPI_DEBUG_LOG(ERROR,
                                                "DSP verify %x %x %x %x\n",
                                                address, *pcode, data,
                                                dsp_index);
                                        break;
                                }
                                pcode++;
                                address += 4;
                        }
                        if (error)
                                break;
                }
                hpi_dsp_code_close(&dsp_code);
                if (error)
                        return error;

                /* zero out the hostmailbox */
                {
                        u32 address = HPI_HIF_ADDR(host_cmd);
                        for (i = 0; i < 4; i++) {
                                hpi_write_word(pdo, address, 0);
                                address += 4;
                        }
                }
                /* write the DSP number into the hostmailbox */
                /* structure before starting the DSP */
                hpi_write_word(pdo, HPI_HIF_ADDR(dsp_number), dsp_index);

                /* write the DSP adapter Info into the */
                /* hostmailbox before starting the DSP */
                if (dsp_index > 0)
                        hpi_write_word(pdo, HPI_HIF_ADDR(adapter_info),
                                adapter_info);

                /* step 3. Start code by sending interrupt */
                iowrite32(0x00030003, pdo->prHPI_control);
                hpios_delay_micro_seconds(10000);

                /* wait for a non-zero value in hostcmd -
                 * indicating initialization is complete
                 *
                 * Init could take a while if DSP checks SDRAM memory
                 * Was 200000. Increased to 2000000 for ASI8801 so we
                 * don't get 938 errors.
                 */
                timeout = 2000000;
                while (timeout) {
                        do {
                                read = hpi_read_word(pdo,
                                        HPI_HIF_ADDR(host_cmd));
                        } while (--timeout
                                && hpi6000_check_PCI2040_error_flag(pao,
                                        H6READ));

                        if (read)
                                break;
                        /* The following is a workaround for bug #94:
                         * Bluescreen on install and subsequent boots on a
                         * DELL PowerEdge 600SC PC with 1.8GHz P4 and
                         * ServerWorks chipset. Without this delay the system
                         * locks up with a bluescreen (NOT GPF or pagefault).
                         */
                        else
                                hpios_delay_micro_seconds(10000);
                }
                if (timeout == 0)
                        return HPI6000_ERROR_INIT_NOACK;

                /* read the DSP adapter Info from the */
                /* hostmailbox structure after starting the DSP */
                if (dsp_index == 0) {
                        /*u32 dwTestData=0; */
                        u32 mask = 0;

                        adapter_info =
                                hpi_read_word(pdo,
                                HPI_HIF_ADDR(adapter_info));
                        if (HPI_ADAPTER_FAMILY_ASI
                                (HPI_HIF_ADAPTER_INFO_EXTRACT_ADAPTER
                                        (adapter_info)) ==
                                HPI_ADAPTER_FAMILY_ASI(0x6200))
                                /* all 6200 cards have this many DSPs */
                                phw->num_dsp = 2;

                        /* test that the PLD is programmed */
                        /* and we can read/write 24bits */
#define PLD_BASE_ADDRESS 0x90000000L    /*for ASI6100/6200/8800 */

                        switch (boot_load_family) {
                        case HPI_ADAPTER_FAMILY_ASI(0x6200):
                                /* ASI6100/6200 has 24bit path to FPGA */
                                mask = 0xFFFFFF00L;
                                /* ASI5100 uses AX6 code, */
                                /* but has no PLD r/w register to test */
                                if (HPI_ADAPTER_FAMILY_ASI(pao->pci.pci_dev->
                                                subsystem_device) ==
                                        HPI_ADAPTER_FAMILY_ASI(0x5100))
                                        mask = 0x00000000L;
                                /* ASI5200 uses AX6 code, */
                                /* but has no PLD r/w register to test */
                                if (HPI_ADAPTER_FAMILY_ASI(pao->pci.pci_dev->
                                                subsystem_device) ==
                                        HPI_ADAPTER_FAMILY_ASI(0x5200))
                                        mask = 0x00000000L;
                                break;
                        case HPI_ADAPTER_FAMILY_ASI(0x8800):
                                /* ASI8800 has 16bit path to FPGA */
                                mask = 0xFFFF0000L;
                                break;
                        }
                        test_data = 0xAAAAAA00L & mask;
                        /* write to 24 bit Debug register (D31-D8) */
                        hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
                        read = hpi_read_word(pdo,
                                PLD_BASE_ADDRESS + 4L) & mask;
                        if (read != test_data) {
                                HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
                                        read);
                                return HPI6000_ERROR_INIT_PLDTEST1;
                        }
                        test_data = 0x55555500L & mask;
                        hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
                        read = hpi_read_word(pdo,
                                PLD_BASE_ADDRESS + 4L) & mask;
                        if (read != test_data) {
                                HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
                                        read);
                                return HPI6000_ERROR_INIT_PLDTEST2;
                        }
                }
        }       /* for numDSP */
        return 0;
}

#define PCI_TIMEOUT 100

static int hpi_set_address(struct dsp_obj *pdo, u32 address)
{
        u32 timeout = PCI_TIMEOUT;

        do {
                iowrite32(address, pdo->prHPI_address);
        } while (hpi6000_check_PCI2040_error_flag(pdo->pa_parent_adapter,
                        H6WRITE)
                && --timeout);

        if (timeout)
                return 0;

        return 1;
}

/* write one word to the HPI port */
static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data)
{
        if (hpi_set_address(pdo, address))
                return;
        iowrite32(data, pdo->prHPI_data);
}

/* read one word from the HPI port */
static u32 hpi_read_word(struct dsp_obj *pdo, u32 address)
{
        u32 data = 0;

        if (hpi_set_address(pdo, address))
                return 0;       /*? No way to return error */

        /* take care of errata in revB DSP (2.0.1) */
        data = ioread32(pdo->prHPI_data);
        return data;
}

/* write a block of 32bit words to the DSP HPI port using auto-inc mode */
static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
        u32 length)
{
        u16 length16 = length - 1;

        if (length == 0)
                return;

        if (hpi_set_address(pdo, address))
                return;

        iowrite32_rep(pdo->prHPI_data_auto_inc, pdata, length16);

        /* take care of errata in revB DSP (2.0.1) */
        /* must end with non auto-inc */
        iowrite32(*(pdata + length - 1), pdo->prHPI_data);
}

/** read a block of 32bit words from the DSP HPI port using auto-inc mode
 */
static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
        u32 length)
{
        u16 length16 = length - 1;

        if (length == 0)
                return;

        if (hpi_set_address(pdo, address))
                return;

        ioread32_rep(pdo->prHPI_data_auto_inc, pdata, length16);

        /* take care of errata in revB DSP (2.0.1) */
        /* must end with non auto-inc */
        *(pdata + length - 1) = ioread32(pdo->prHPI_data);
}

static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
        u16 dsp_index, u32 hpi_address, u32 *source, u32 count)
{
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 time_out = PCI_TIMEOUT;
        int c6711_burst_size = 128;
        u32 local_hpi_address = hpi_address;
        int local_count = count;
        int xfer_size;
        u32 *pdata = source;

        while (local_count) {
                if (local_count > c6711_burst_size)
                        xfer_size = c6711_burst_size;
                else
                        xfer_size = local_count;

                time_out = PCI_TIMEOUT;
                do {
                        hpi_write_block(pdo, local_hpi_address, pdata,
                                xfer_size);
                } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
                        && --time_out);

                if (!time_out)
                        break;
                pdata += xfer_size;
                local_hpi_address += sizeof(u32) * xfer_size;
                local_count -= xfer_size;
        }

        if (time_out)
                return 0;
        else
                return 1;
}

static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
        u16 dsp_index, u32 hpi_address, u32 *dest, u32 count)
{
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 time_out = PCI_TIMEOUT;
        int c6711_burst_size = 16;
        u32 local_hpi_address = hpi_address;
        int local_count = count;
        int xfer_size;
        u32 *pdata = dest;
        u32 loop_count = 0;

        while (local_count) {
                if (local_count > c6711_burst_size)
                        xfer_size = c6711_burst_size;
                else
                        xfer_size = local_count;

                time_out = PCI_TIMEOUT;
                do {
                        hpi_read_block(pdo, local_hpi_address, pdata,
                                xfer_size);
                } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
                        && --time_out);
                if (!time_out)
                        break;

                pdata += xfer_size;
                local_hpi_address += sizeof(u32) * xfer_size;
                local_count -= xfer_size;
                loop_count++;
        }

        if (time_out)
                return 0;
        else
                return 1;
}

static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
        u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr)
{
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 timeout;
        u16 ack;
        u32 address;
        u32 length;
        u32 *p_data;
        u16 error = 0;

        ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
        if (ack & HPI_HIF_ERROR_MASK) {
                pao->dsp_crashed++;
                return HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT;
        }
        pao->dsp_crashed = 0;

        /* get the message address and size */
        if (phw->message_buffer_address_on_dsp == 0) {
                timeout = TIMEOUT;
                do {
                        address =
                                hpi_read_word(pdo,
                                HPI_HIF_ADDR(message_buffer_address));
                        phw->message_buffer_address_on_dsp = address;
                } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
                        && --timeout);
                if (!timeout)
                        return HPI6000_ERROR_MSG_GET_ADR;
        } else
                address = phw->message_buffer_address_on_dsp;

        length = phm->size;

        /* send the message */
        p_data = (u32 *)phm;
        if (hpi6000_dsp_block_write32(pao, dsp_index, address, p_data,
                        (u16)length / 4))
                return HPI6000_ERROR_MSG_RESP_BLOCKWRITE32;

        if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_GET_RESP))
                return HPI6000_ERROR_MSG_RESP_GETRESPCMD;
        hpi6000_send_dsp_interrupt(pdo);

        ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_RESP);
        if (ack & HPI_HIF_ERROR_MASK)
                return HPI6000_ERROR_MSG_RESP_GET_RESP_ACK;

        /* get the response address */
        if (phw->response_buffer_address_on_dsp == 0) {
                timeout = TIMEOUT;
                do {
                        address =
                                hpi_read_word(pdo,
                                HPI_HIF_ADDR(response_buffer_address));
                } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
                        && --timeout);
                phw->response_buffer_address_on_dsp = address;

                if (!timeout)
                        return HPI6000_ERROR_RESP_GET_ADR;
        } else
                address = phw->response_buffer_address_on_dsp;

        /* read the length of the response back from the DSP */
        timeout = TIMEOUT;
        do {
                length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
        } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
        if (!timeout)
                return HPI6000_ERROR_RESP_GET_LEN;

        if (length > phr->size)
                return HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL;

        /* get the response */
        p_data = (u32 *)phr;
        if (hpi6000_dsp_block_read32(pao, dsp_index, address, p_data,
                        (u16)length / 4))
                return HPI6000_ERROR_MSG_RESP_BLOCKREAD32;

        /* set i/f back to idle */
        if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
                return HPI6000_ERROR_MSG_RESP_IDLECMD;
        hpi6000_send_dsp_interrupt(pdo);

        error = hpi_validate_response(phm, phr);
        return error;
}

/* have to set up the below defines to match stuff in the MAP file */

#define MSG_ADDRESS (HPI_HIF_BASE+0x18)
#define MSG_LENGTH 11
#define RESP_ADDRESS (HPI_HIF_BASE+0x44)
#define RESP_LENGTH 16
#define QUEUE_START  (HPI_HIF_BASE+0x88)
#define QUEUE_SIZE 0x8000

static short hpi6000_send_data_check_adr(u32 address, u32 length_in_dwords)
{
/*#define CHECKING       // comment this line in to enable checking */
#ifdef CHECKING
        if (address < (u32)MSG_ADDRESS)
                return 0;
        if (address > (u32)(QUEUE_START + QUEUE_SIZE))
                return 0;
        if ((address + (length_in_dwords << 2)) >
                (u32)(QUEUE_START + QUEUE_SIZE))
                return 0;
#else
        (void)address;
        (void)length_in_dwords;
        return 1;
#endif
}

static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
        struct hpi_message *phm, struct hpi_response *phr)
{
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 data_sent = 0;
        u16 ack;
        u32 length, address;
        u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;
        u16 time_out = 8;

        (void)phr;

        /* round dwDataSize down to nearest 4 bytes */
        while ((data_sent < (phm->u.d.u.data.data_size & ~3L))
                && --time_out) {
                ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
                if (ack & HPI_HIF_ERROR_MASK)
                        return HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT;

                if (hpi6000_send_host_command(pao, dsp_index,
                                HPI_HIF_SEND_DATA))
                        return HPI6000_ERROR_SEND_DATA_CMD;

                hpi6000_send_dsp_interrupt(pdo);

                ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_SEND_DATA);

                if (ack & HPI_HIF_ERROR_MASK)
                        return HPI6000_ERROR_SEND_DATA_ACK;

                do {
                        /* get the address and size */
                        address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
                        /* DSP returns number of DWORDS */
                        length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
                } while (hpi6000_check_PCI2040_error_flag(pao, H6READ));

                if (!hpi6000_send_data_check_adr(address, length))
                        return HPI6000_ERROR_SEND_DATA_ADR;

                /* send the data. break data into 512 DWORD blocks (2K bytes)
                 * and send using block write. 2Kbytes is the max as this is the
                 * memory window given to the HPI data register by the PCI2040
                 */

                {
                        u32 len = length;
                        u32 blk_len = 512;
                        while (len) {
                                if (len < blk_len)
                                        blk_len = len;
                                if (hpi6000_dsp_block_write32(pao, dsp_index,
                                                address, p_data, blk_len))
                                        return HPI6000_ERROR_SEND_DATA_WRITE;
                                address += blk_len * 4;
                                p_data += blk_len;
                                len -= blk_len;
                        }
                }

                if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
                        return HPI6000_ERROR_SEND_DATA_IDLECMD;

                hpi6000_send_dsp_interrupt(pdo);

                data_sent += length * 4;
        }
        if (!time_out)
                return HPI6000_ERROR_SEND_DATA_TIMEOUT;
        return 0;
}

static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
        struct hpi_message *phm, struct hpi_response *phr)
{
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 data_got = 0;
        u16 ack;
        u32 length, address;
        u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;

        (void)phr;      /* this parameter not used! */

        /* round dwDataSize down to nearest 4 bytes */
        while (data_got < (phm->u.d.u.data.data_size & ~3L)) {
                ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
                if (ack & HPI_HIF_ERROR_MASK)
                        return HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT;

                if (hpi6000_send_host_command(pao, dsp_index,
                                HPI_HIF_GET_DATA))
                        return HPI6000_ERROR_GET_DATA_CMD;
                hpi6000_send_dsp_interrupt(pdo);

                ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_DATA);

                if (ack & HPI_HIF_ERROR_MASK)
                        return HPI6000_ERROR_GET_DATA_ACK;

                /* get the address and size */
                do {
                        address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
                        length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
                } while (hpi6000_check_PCI2040_error_flag(pao, H6READ));

                /* read the data */
                {
                        u32 len = length;
                        u32 blk_len = 512;
                        while (len) {
                                if (len < blk_len)
                                        blk_len = len;
                                if (hpi6000_dsp_block_read32(pao, dsp_index,
                                                address, p_data, blk_len))
                                        return HPI6000_ERROR_GET_DATA_READ;
                                address += blk_len * 4;
                                p_data += blk_len;
                                len -= blk_len;
                        }
                }

                if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
                        return HPI6000_ERROR_GET_DATA_IDLECMD;
                hpi6000_send_dsp_interrupt(pdo);

                data_got += length * 4;
        }
        return 0;
}

static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo)
{
        iowrite32(0x00030003, pdo->prHPI_control);      /* DSPINT */
}

static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
        u16 dsp_index, u32 host_cmd)
{
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 timeout = TIMEOUT;

        /* set command */
        do {
                hpi_write_word(pdo, HPI_HIF_ADDR(host_cmd), host_cmd);
                /* flush the FIFO */
                hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
        } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE) && --timeout);

        /* reset the interrupt bit */
        iowrite32(0x00040004, pdo->prHPI_control);

        if (timeout)
                return 0;
        else
                return 1;
}

/* if the PCI2040 has recorded an HPI timeout, reset the error and return 1 */
static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
        u16 read_or_write)
{
        u32 hPI_error;

        struct hpi_hw_obj *phw = pao->priv;

        /* read the error bits from the PCI2040 */
        hPI_error = ioread32(phw->dw2040_HPICSR + HPI_ERROR_REPORT);
        if (hPI_error) {
                /* reset the error flag */
                iowrite32(0L, phw->dw2040_HPICSR + HPI_ERROR_REPORT);
                phw->pCI2040HPI_error_count++;
                if (read_or_write == 1)
                        gw_pci_read_asserts++;     /************* inc global */
                else
                        gw_pci_write_asserts++;
                return 1;
        } else
                return 0;
}

static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
        u32 ack_value)
{
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 ack = 0L;
        u32 timeout;
        u32 hPIC = 0L;

        /* wait for host interrupt to signal ack is ready */
        timeout = TIMEOUT;
        while (--timeout) {
                hPIC = ioread32(pdo->prHPI_control);
                if (hPIC & 0x04)        /* 0x04 = HINT from DSP */
                        break;
        }
        if (timeout == 0)
                return HPI_HIF_ERROR_MASK;

        /* wait for dwAckValue */
        timeout = TIMEOUT;
        while (--timeout) {
                /* read the ack mailbox */
                ack = hpi_read_word(pdo, HPI_HIF_ADDR(dsp_ack));
                if (ack == ack_value)
                        break;
                if ((ack & HPI_HIF_ERROR_MASK)
                        && !hpi6000_check_PCI2040_error_flag(pao, H6READ))
                        break;
                /*for (i=0;i<1000;i++) */
                /*      dwPause=i+1; */
        }
        if (ack & HPI_HIF_ERROR_MASK)
                /* indicates bad read from DSP -
                   typically 0xffffff is read for some reason */
                ack = HPI_HIF_ERROR_MASK;

        if (timeout == 0)
                ack = HPI_HIF_ERROR_MASK;
        return (short)ack;
}

static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
        struct hpi_message *phm)
{
        const u16 dsp_index = 0;
        struct hpi_hw_obj *phw = pao->priv;
        struct dsp_obj *pdo = &phw->ado[dsp_index];
        u32 timeout;
        u32 cache_dirty_flag;
        u16 err;

        hpios_dsplock_lock(pao);

        timeout = TIMEOUT;
        do {
                cache_dirty_flag =
                        hpi_read_word((struct dsp_obj *)pdo,
                        HPI_HIF_ADDR(control_cache_is_dirty));
        } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
        if (!timeout) {
                err = HPI6000_ERROR_CONTROL_CACHE_PARAMS;
                goto unlock;
        }

        if (cache_dirty_flag) {
                /* read the cached controls */
                u32 address;
                u32 length;

                timeout = TIMEOUT;
                if (pdo->control_cache_address_on_dsp == 0) {
                        do {
                                address =
                                        hpi_read_word((struct dsp_obj *)pdo,
                                        HPI_HIF_ADDR(control_cache_address));

                                length = hpi_read_word((struct dsp_obj *)pdo,
                                        HPI_HIF_ADDR
                                        (control_cache_size_in_bytes));
                        } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
                                && --timeout);
                        if (!timeout) {
                                err = HPI6000_ERROR_CONTROL_CACHE_ADDRLEN;
                                goto unlock;
                        }
                        pdo->control_cache_address_on_dsp = address;
                        pdo->control_cache_length_on_dsp = length;
                } else {
                        address = pdo->control_cache_address_on_dsp;
                        length = pdo->control_cache_length_on_dsp;
                }

                if (hpi6000_dsp_block_read32(pao, dsp_index, address,
                                (u32 *)&phw->control_cache[0],
                                length / sizeof(u32))) {
                        err = HPI6000_ERROR_CONTROL_CACHE_READ;
                        goto unlock;
                }
                do {
                        hpi_write_word((struct dsp_obj *)pdo,
                                HPI_HIF_ADDR(control_cache_is_dirty), 0);
                        /* flush the FIFO */
                        hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
                } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
                        && --timeout);
                if (!timeout) {
                        err = HPI6000_ERROR_CONTROL_CACHE_FLUSH;
                        goto unlock;
                }

        }
        err = 0;

unlock:
        hpios_dsplock_unlock(pao);
        return err;
}

/** Get dsp index for multi DSP adapters only */
static u16 get_dsp_index(struct hpi_adapter_obj *pao, struct hpi_message *phm)
{
        u16 ret = 0;
        switch (phm->object) {
        case HPI_OBJ_ISTREAM:
                if (phm->obj_index < 2)
                        ret = 1;
                break;
        case HPI_OBJ_PROFILE:
                ret = phm->obj_index;
                break;
        default:
                break;
        }
        return ret;
}

/** Complete transaction with DSP

Send message, get response, send or get stream data if any.
*/
static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
        struct hpi_response *phr)
{
        u16 error = 0;
        u16 dsp_index = 0;
        struct hpi_hw_obj *phw = pao->priv;
        u16 num_dsp = phw->num_dsp;

        if (num_dsp < 2)
                dsp_index = 0;
        else {
                dsp_index = get_dsp_index(pao, phm);

                /* is this  checked on the DSP anyway? */
                if ((phm->function == HPI_ISTREAM_GROUP_ADD)
                        || (phm->function == HPI_OSTREAM_GROUP_ADD)) {
                        struct hpi_message hm;
                        u16 add_index;
                        hm.obj_index = phm->u.d.u.stream.stream_index;
                        hm.object = phm->u.d.u.stream.object_type;
                        add_index = get_dsp_index(pao, &hm);
                        if (add_index != dsp_index) {
                                phr->error = HPI_ERROR_NO_INTERDSP_GROUPS;
                                return;
                        }
                }
        }

        hpios_dsplock_lock(pao);
        error = hpi6000_message_response_sequence(pao, dsp_index, phm, phr);

        if (error)      /* something failed in the HPI/DSP interface */
                goto err;

        if (phr->error) /* something failed in the DSP */
                goto out;

        switch (phm->function) {
        case HPI_OSTREAM_WRITE:
        case HPI_ISTREAM_ANC_WRITE:
                error = hpi6000_send_data(pao, dsp_index, phm, phr);
                break;
        case HPI_ISTREAM_READ:
        case HPI_OSTREAM_ANC_READ:
                error = hpi6000_get_data(pao, dsp_index, phm, phr);
                break;
        case HPI_ADAPTER_GET_ASSERT:
                phr->u.ax.assert.dsp_index = 0; /* dsp 0 default */
                if (num_dsp == 2) {
                        if (!phr->u.ax.assert.count) {
                                /* no assert from dsp 0, check dsp 1 */
                                error = hpi6000_message_response_sequence(pao,
                                        1, phm, phr);
                                phr->u.ax.assert.dsp_index = 1;
                        }
                }
        }

err:
        if (error) {
                if (error >= HPI_ERROR_BACKEND_BASE) {
                        phr->error = HPI_ERROR_DSP_COMMUNICATION;
                        phr->specific_error = error;
                } else {
                        phr->error = error;
                }

                /* just the header of the response is valid */
                phr->size = sizeof(struct hpi_response_header);
        }
out:
        hpios_dsplock_unlock(pao);
        return;
}